summaryrefslogtreecommitdiff
path: root/arch/mips/include/asm/mach-au1x00
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/include/asm/mach-au1x00')
-rw-r--r--arch/mips/include/asm/mach-au1x00/au1000.h273
-rw-r--r--arch/mips/include/asm/mach-au1x00/au1100_mmc.h2
-rw-r--r--arch/mips/include/asm/mach-au1x00/au1200fb.h14
-rw-r--r--arch/mips/include/asm/mach-au1x00/au1550nd.h16
-rw-r--r--arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h31
-rw-r--r--arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h3
-rw-r--r--arch/mips/include/asm/mach-au1x00/gpio-au1300.h241
-rw-r--r--arch/mips/include/asm/mach-au1x00/gpio.h3
8 files changed, 533 insertions, 50 deletions
diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index de24ec57dd2f..569828d3ccab 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -136,6 +136,7 @@ static inline int au1xxx_cpu_needs_config_od(void)
#define ALCHEMY_CPU_AU1100 2
#define ALCHEMY_CPU_AU1550 3
#define ALCHEMY_CPU_AU1200 4
+#define ALCHEMY_CPU_AU1300 5
static inline int alchemy_get_cputype(void)
{
@@ -156,6 +157,9 @@ static inline int alchemy_get_cputype(void)
case 0x05030000:
return ALCHEMY_CPU_AU1200;
break;
+ case 0x800c0000:
+ return ALCHEMY_CPU_AU1300;
+ break;
}
return ALCHEMY_CPU_UNKNOWN;
@@ -166,6 +170,7 @@ static inline int alchemy_get_uarts(int type)
{
switch (type) {
case ALCHEMY_CPU_AU1000:
+ case ALCHEMY_CPU_AU1300:
return 4;
case ALCHEMY_CPU_AU1500:
case ALCHEMY_CPU_AU1200:
@@ -243,6 +248,7 @@ extern unsigned long au1xxx_calc_clock(void);
/* PM: arch/mips/alchemy/common/sleeper.S, power.c, irq.c */
void alchemy_sleep_au1000(void);
void alchemy_sleep_au1550(void);
+void alchemy_sleep_au1300(void);
void au_sleep(void);
/* USB: drivers/usb/host/alchemy-common.c */
@@ -251,6 +257,7 @@ enum alchemy_usb_block {
ALCHEMY_USB_UDC0,
ALCHEMY_USB_EHCI0,
ALCHEMY_USB_OTG0,
+ ALCHEMY_USB_OHCI1,
};
int alchemy_usb_control(int block, int enable);
@@ -263,14 +270,92 @@ struct alchemy_pci_platdata {
unsigned long pci_cfg_clr;
};
-/* SOC Interrupt numbers */
+/* Multifunction pins: Each of these pins can either be assigned to the
+ * GPIO controller or a on-chip peripheral.
+ * Call "au1300_pinfunc_to_dev()" or "au1300_pinfunc_to_gpio()" to
+ * assign one of these to either the GPIO controller or the device.
+ */
+enum au1300_multifunc_pins {
+ /* wake-from-str pins 0-3 */
+ AU1300_PIN_WAKE0 = 0, AU1300_PIN_WAKE1, AU1300_PIN_WAKE2,
+ AU1300_PIN_WAKE3,
+ /* external clock sources for PSCs: 4-5 */
+ AU1300_PIN_EXTCLK0, AU1300_PIN_EXTCLK1,
+ /* 8bit MMC interface on SD0: 6-9 */
+ AU1300_PIN_SD0DAT4, AU1300_PIN_SD0DAT5, AU1300_PIN_SD0DAT6,
+ AU1300_PIN_SD0DAT7,
+ /* aux clk input for freqgen 3: 10 */
+ AU1300_PIN_FG3AUX,
+ /* UART1 pins: 11-18 */
+ AU1300_PIN_U1RI, AU1300_PIN_U1DCD, AU1300_PIN_U1DSR,
+ AU1300_PIN_U1CTS, AU1300_PIN_U1RTS, AU1300_PIN_U1DTR,
+ AU1300_PIN_U1RX, AU1300_PIN_U1TX,
+ /* UART0 pins: 19-24 */
+ AU1300_PIN_U0RI, AU1300_PIN_U0DCD, AU1300_PIN_U0DSR,
+ AU1300_PIN_U0CTS, AU1300_PIN_U0RTS, AU1300_PIN_U0DTR,
+ /* UART2: 25-26 */
+ AU1300_PIN_U2RX, AU1300_PIN_U2TX,
+ /* UART3: 27-28 */
+ AU1300_PIN_U3RX, AU1300_PIN_U3TX,
+ /* LCD controller PWMs, ext pixclock: 29-31 */
+ AU1300_PIN_LCDPWM0, AU1300_PIN_LCDPWM1, AU1300_PIN_LCDCLKIN,
+ /* SD1 interface: 32-37 */
+ AU1300_PIN_SD1DAT0, AU1300_PIN_SD1DAT1, AU1300_PIN_SD1DAT2,
+ AU1300_PIN_SD1DAT3, AU1300_PIN_SD1CMD, AU1300_PIN_SD1CLK,
+ /* SD2 interface: 38-43 */
+ AU1300_PIN_SD2DAT0, AU1300_PIN_SD2DAT1, AU1300_PIN_SD2DAT2,
+ AU1300_PIN_SD2DAT3, AU1300_PIN_SD2CMD, AU1300_PIN_SD2CLK,
+ /* PSC0/1 clocks: 44-45 */
+ AU1300_PIN_PSC0CLK, AU1300_PIN_PSC1CLK,
+ /* PSCs: 46-49/50-53/54-57/58-61 */
+ AU1300_PIN_PSC0SYNC0, AU1300_PIN_PSC0SYNC1, AU1300_PIN_PSC0D0,
+ AU1300_PIN_PSC0D1,
+ AU1300_PIN_PSC1SYNC0, AU1300_PIN_PSC1SYNC1, AU1300_PIN_PSC1D0,
+ AU1300_PIN_PSC1D1,
+ AU1300_PIN_PSC2SYNC0, AU1300_PIN_PSC2SYNC1, AU1300_PIN_PSC2D0,
+ AU1300_PIN_PSC2D1,
+ AU1300_PIN_PSC3SYNC0, AU1300_PIN_PSC3SYNC1, AU1300_PIN_PSC3D0,
+ AU1300_PIN_PSC3D1,
+ /* PCMCIA interface: 62-70 */
+ AU1300_PIN_PCE2, AU1300_PIN_PCE1, AU1300_PIN_PIOS16,
+ AU1300_PIN_PIOR, AU1300_PIN_PWE, AU1300_PIN_PWAIT,
+ AU1300_PIN_PREG, AU1300_PIN_POE, AU1300_PIN_PIOW,
+ /* camera interface H/V sync inputs: 71-72 */
+ AU1300_PIN_CIMLS, AU1300_PIN_CIMFS,
+ /* PSC2/3 clocks: 73-74 */
+ AU1300_PIN_PSC2CLK, AU1300_PIN_PSC3CLK,
+};
+
+/* GPIC (Au1300) pin management: arch/mips/alchemy/common/gpioint.c */
+extern void au1300_pinfunc_to_gpio(enum au1300_multifunc_pins gpio);
+extern void au1300_pinfunc_to_dev(enum au1300_multifunc_pins gpio);
+extern void au1300_set_irq_priority(unsigned int irq, int p);
+extern void au1300_set_dbdma_gpio(int dchan, unsigned int gpio);
+
+/* Au1300 allows to disconnect certain blocks from internal power supply */
+enum au1300_vss_block {
+ AU1300_VSS_MPE = 0,
+ AU1300_VSS_BSA,
+ AU1300_VSS_GPE,
+ AU1300_VSS_MGP,
+};
+extern void au1300_vss_block_control(int block, int enable);
+
+
+/* SOC Interrupt numbers */
+/* Au1000-style (IC0/1): 2 controllers with 32 sources each */
#define AU1000_INTC0_INT_BASE (MIPS_CPU_IRQ_BASE + 8)
#define AU1000_INTC0_INT_LAST (AU1000_INTC0_INT_BASE + 31)
#define AU1000_INTC1_INT_BASE (AU1000_INTC0_INT_LAST + 1)
#define AU1000_INTC1_INT_LAST (AU1000_INTC1_INT_BASE + 31)
#define AU1000_MAX_INTR AU1000_INTC1_INT_LAST
+/* Au1300-style (GPIC): 1 controller with up to 128 sources */
+#define ALCHEMY_GPIC_INT_BASE (MIPS_CPU_IRQ_BASE + 8)
+#define ALCHEMY_GPIC_INT_NUM 128
+#define ALCHEMY_GPIC_INT_LAST (ALCHEMY_GPIC_INT_BASE + ALCHEMY_GPIC_INT_NUM - 1)
+
enum soc_au1000_ints {
AU1000_FIRST_INT = AU1000_INTC0_INT_BASE,
AU1000_UART0_INT = AU1000_FIRST_INT,
@@ -591,24 +676,77 @@ enum soc_au1200_ints {
#endif /* !defined (_LANGUAGE_ASSEMBLY) */
+/* Au1300 peripheral interrupt numbers */
+#define AU1300_FIRST_INT (ALCHEMY_GPIC_INT_BASE)
+#define AU1300_UART1_INT (AU1300_FIRST_INT + 17)
+#define AU1300_UART2_INT (AU1300_FIRST_INT + 25)
+#define AU1300_UART3_INT (AU1300_FIRST_INT + 27)
+#define AU1300_SD1_INT (AU1300_FIRST_INT + 32)
+#define AU1300_SD2_INT (AU1300_FIRST_INT + 38)
+#define AU1300_PSC0_INT (AU1300_FIRST_INT + 48)
+#define AU1300_PSC1_INT (AU1300_FIRST_INT + 52)
+#define AU1300_PSC2_INT (AU1300_FIRST_INT + 56)
+#define AU1300_PSC3_INT (AU1300_FIRST_INT + 60)
+#define AU1300_NAND_INT (AU1300_FIRST_INT + 62)
+#define AU1300_DDMA_INT (AU1300_FIRST_INT + 75)
+#define AU1300_MMU_INT (AU1300_FIRST_INT + 76)
+#define AU1300_MPU_INT (AU1300_FIRST_INT + 77)
+#define AU1300_GPU_INT (AU1300_FIRST_INT + 78)
+#define AU1300_UDMA_INT (AU1300_FIRST_INT + 79)
+#define AU1300_TOY_INT (AU1300_FIRST_INT + 80)
+#define AU1300_TOY_MATCH0_INT (AU1300_FIRST_INT + 81)
+#define AU1300_TOY_MATCH1_INT (AU1300_FIRST_INT + 82)
+#define AU1300_TOY_MATCH2_INT (AU1300_FIRST_INT + 83)
+#define AU1300_RTC_INT (AU1300_FIRST_INT + 84)
+#define AU1300_RTC_MATCH0_INT (AU1300_FIRST_INT + 85)
+#define AU1300_RTC_MATCH1_INT (AU1300_FIRST_INT + 86)
+#define AU1300_RTC_MATCH2_INT (AU1300_FIRST_INT + 87)
+#define AU1300_UART0_INT (AU1300_FIRST_INT + 88)
+#define AU1300_SD0_INT (AU1300_FIRST_INT + 89)
+#define AU1300_USB_INT (AU1300_FIRST_INT + 90)
+#define AU1300_LCD_INT (AU1300_FIRST_INT + 91)
+#define AU1300_BSA_INT (AU1300_FIRST_INT + 92)
+#define AU1300_MPE_INT (AU1300_FIRST_INT + 93)
+#define AU1300_ITE_INT (AU1300_FIRST_INT + 94)
+#define AU1300_AES_INT (AU1300_FIRST_INT + 95)
+#define AU1300_CIM_INT (AU1300_FIRST_INT + 96)
+
+/**********************************************************************/
+
/*
* Physical base addresses for integrated peripherals
- * 0..au1000 1..au1500 2..au1100 3..au1550 4..au1200
+ * 0..au1000 1..au1500 2..au1100 3..au1550 4..au1200 5..au1300
*/
#define AU1000_AC97_PHYS_ADDR 0x10000000 /* 012 */
+#define AU1300_ROM_PHYS_ADDR 0x10000000 /* 5 */
+#define AU1300_OTP_PHYS_ADDR 0x10002000 /* 5 */
+#define AU1300_VSS_PHYS_ADDR 0x10003000 /* 5 */
+#define AU1300_UART0_PHYS_ADDR 0x10100000 /* 5 */
+#define AU1300_UART1_PHYS_ADDR 0x10101000 /* 5 */
+#define AU1300_UART2_PHYS_ADDR 0x10102000 /* 5 */
+#define AU1300_UART3_PHYS_ADDR 0x10103000 /* 5 */
#define AU1000_USB_OHCI_PHYS_ADDR 0x10100000 /* 012 */
#define AU1000_USB_UDC_PHYS_ADDR 0x10200000 /* 0123 */
+#define AU1300_GPIC_PHYS_ADDR 0x10200000 /* 5 */
#define AU1000_IRDA_PHYS_ADDR 0x10300000 /* 02 */
-#define AU1200_AES_PHYS_ADDR 0x10300000 /* 4 */
+#define AU1200_AES_PHYS_ADDR 0x10300000 /* 45 */
#define AU1000_IC0_PHYS_ADDR 0x10400000 /* 01234 */
+#define AU1300_GPU_PHYS_ADDR 0x10500000 /* 5 */
#define AU1000_MAC0_PHYS_ADDR 0x10500000 /* 023 */
#define AU1000_MAC1_PHYS_ADDR 0x10510000 /* 023 */
#define AU1000_MACEN_PHYS_ADDR 0x10520000 /* 023 */
-#define AU1100_SD0_PHYS_ADDR 0x10600000 /* 24 */
+#define AU1100_SD0_PHYS_ADDR 0x10600000 /* 245 */
+#define AU1300_SD1_PHYS_ADDR 0x10601000 /* 5 */
+#define AU1300_SD2_PHYS_ADDR 0x10602000 /* 5 */
#define AU1100_SD1_PHYS_ADDR 0x10680000 /* 24 */
+#define AU1300_SYS_PHYS_ADDR 0x10900000 /* 5 */
#define AU1550_PSC2_PHYS_ADDR 0x10A00000 /* 3 */
#define AU1550_PSC3_PHYS_ADDR 0x10B00000 /* 3 */
+#define AU1300_PSC0_PHYS_ADDR 0x10A00000 /* 5 */
+#define AU1300_PSC1_PHYS_ADDR 0x10A01000 /* 5 */
+#define AU1300_PSC2_PHYS_ADDR 0x10A02000 /* 5 */
+#define AU1300_PSC3_PHYS_ADDR 0x10A03000 /* 5 */
#define AU1000_I2S_PHYS_ADDR 0x11000000 /* 02 */
#define AU1500_MAC0_PHYS_ADDR 0x11500000 /* 1 */
#define AU1500_MAC1_PHYS_ADDR 0x11510000 /* 1 */
@@ -622,37 +760,96 @@ enum soc_au1200_ints {
#define AU1000_SSI1_PHYS_ADDR 0x11680000 /* 02 */
#define AU1500_GPIO2_PHYS_ADDR 0x11700000 /* 1234 */
#define AU1000_IC1_PHYS_ADDR 0x11800000 /* 01234 */
-#define AU1000_SYS_PHYS_ADDR 0x11900000 /* 01234 */
+#define AU1000_SYS_PHYS_ADDR 0x11900000 /* 012345 */
#define AU1550_PSC0_PHYS_ADDR 0x11A00000 /* 34 */
#define AU1550_PSC1_PHYS_ADDR 0x11B00000 /* 34 */
#define AU1000_MEM_PHYS_ADDR 0x14000000 /* 01234 */
#define AU1000_STATIC_MEM_PHYS_ADDR 0x14001000 /* 01234 */
+#define AU1300_UDMA_PHYS_ADDR 0x14001800 /* 5 */
#define AU1000_DMA_PHYS_ADDR 0x14002000 /* 012 */
-#define AU1550_DBDMA_PHYS_ADDR 0x14002000 /* 34 */
-#define AU1550_DBDMA_CONF_PHYS_ADDR 0x14003000 /* 34 */
+#define AU1550_DBDMA_PHYS_ADDR 0x14002000 /* 345 */
+#define AU1550_DBDMA_CONF_PHYS_ADDR 0x14003000 /* 345 */
#define AU1000_MACDMA0_PHYS_ADDR 0x14004000 /* 0123 */
#define AU1000_MACDMA1_PHYS_ADDR 0x14004200 /* 0123 */
-#define AU1200_CIM_PHYS_ADDR 0x14004000 /* 4 */
+#define AU1200_CIM_PHYS_ADDR 0x14004000 /* 45 */
#define AU1500_PCI_PHYS_ADDR 0x14005000 /* 13 */
#define AU1550_PE_PHYS_ADDR 0x14008000 /* 3 */
#define AU1200_MAEBE_PHYS_ADDR 0x14010000 /* 4 */
#define AU1200_MAEFE_PHYS_ADDR 0x14012000 /* 4 */
+#define AU1300_MAEITE_PHYS_ADDR 0x14010000 /* 5 */
+#define AU1300_MAEMPE_PHYS_ADDR 0x14014000 /* 5 */
#define AU1550_USB_OHCI_PHYS_ADDR 0x14020000 /* 3 */
#define AU1200_USB_CTL_PHYS_ADDR 0x14020000 /* 4 */
#define AU1200_USB_OTG_PHYS_ADDR 0x14020020 /* 4 */
#define AU1200_USB_OHCI_PHYS_ADDR 0x14020100 /* 4 */
#define AU1200_USB_EHCI_PHYS_ADDR 0x14020200 /* 4 */
#define AU1200_USB_UDC_PHYS_ADDR 0x14022000 /* 4 */
+#define AU1300_USB_EHCI_PHYS_ADDR 0x14020000 /* 5 */
+#define AU1300_USB_OHCI0_PHYS_ADDR 0x14020400 /* 5 */
+#define AU1300_USB_OHCI1_PHYS_ADDR 0x14020800 /* 5 */
+#define AU1300_USB_CTL_PHYS_ADDR 0x14021000 /* 5 */
+#define AU1300_USB_OTG_PHYS_ADDR 0x14022000 /* 5 */
+#define AU1300_MAEBSA_PHYS_ADDR 0x14030000 /* 5 */
#define AU1100_LCD_PHYS_ADDR 0x15000000 /* 2 */
-#define AU1200_LCD_PHYS_ADDR 0x15000000 /* 4 */
+#define AU1200_LCD_PHYS_ADDR 0x15000000 /* 45 */
#define AU1500_PCI_MEM_PHYS_ADDR 0x400000000ULL /* 13 */
#define AU1500_PCI_IO_PHYS_ADDR 0x500000000ULL /* 13 */
#define AU1500_PCI_CONFIG0_PHYS_ADDR 0x600000000ULL /* 13 */
#define AU1500_PCI_CONFIG1_PHYS_ADDR 0x680000000ULL /* 13 */
-#define AU1000_PCMCIA_IO_PHYS_ADDR 0xF00000000ULL /* 01234 */
-#define AU1000_PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL /* 01234 */
-#define AU1000_PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL /* 01234 */
+#define AU1000_PCMCIA_IO_PHYS_ADDR 0xF00000000ULL /* 012345 */
+#define AU1000_PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL /* 012345 */
+#define AU1000_PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL /* 012345 */
+/**********************************************************************/
+
+
+/*
+ * Au1300 GPIO+INT controller (GPIC) register offsets and bits
+ * Registers are 128bits (0x10 bytes), divided into 4 "banks".
+ */
+#define AU1300_GPIC_PINVAL 0x0000
+#define AU1300_GPIC_PINVALCLR 0x0010
+#define AU1300_GPIC_IPEND 0x0020
+#define AU1300_GPIC_PRIENC 0x0030
+#define AU1300_GPIC_IEN 0x0040 /* int_mask in manual */
+#define AU1300_GPIC_IDIS 0x0050 /* int_maskclr in manual */
+#define AU1300_GPIC_DMASEL 0x0060
+#define AU1300_GPIC_DEVSEL 0x0080
+#define AU1300_GPIC_DEVCLR 0x0090
+#define AU1300_GPIC_RSTVAL 0x00a0
+/* pin configuration space. one 32bit register for up to 128 IRQs */
+#define AU1300_GPIC_PINCFG 0x1000
+
+#define GPIC_GPIO_TO_BIT(gpio) \
+ (1 << ((gpio) & 0x1f))
+
+#define GPIC_GPIO_BANKOFF(gpio) \
+ (((gpio) >> 5) * 4)
+
+/* Pin Control bits: who owns the pin, what does it do */
+#define GPIC_CFG_PC_GPIN 0
+#define GPIC_CFG_PC_DEV 1
+#define GPIC_CFG_PC_GPOLOW 2
+#define GPIC_CFG_PC_GPOHIGH 3
+#define GPIC_CFG_PC_MASK 3
+
+/* assign pin to MIPS IRQ line */
+#define GPIC_CFG_IL_SET(x) (((x) & 3) << 2)
+#define GPIC_CFG_IL_MASK (3 << 2)
+
+/* pin interrupt type setup */
+#define GPIC_CFG_IC_OFF (0 << 4)
+#define GPIC_CFG_IC_LEVEL_LOW (1 << 4)
+#define GPIC_CFG_IC_LEVEL_HIGH (2 << 4)
+#define GPIC_CFG_IC_EDGE_FALL (5 << 4)
+#define GPIC_CFG_IC_EDGE_RISE (6 << 4)
+#define GPIC_CFG_IC_EDGE_BOTH (7 << 4)
+#define GPIC_CFG_IC_MASK (7 << 4)
+
+/* allow interrupt to wake cpu from 'wait' */
+#define GPIC_CFG_IDLEWAKE (1 << 7)
+
+/***********************************************************************/
/* Au1000 SDRAM memory controller register offsets */
#define AU1000_MEM_SDMODE0 0x0000
@@ -1068,44 +1265,20 @@ enum soc_au1200_ints {
#define SSI_ENABLE_CD (1 << 1)
#define SSI_ENABLE_E (1 << 0)
-/* IrDA Controller */
-#define IRDA_BASE 0xB0300000
-#define IR_RING_PTR_STATUS (IRDA_BASE + 0x00)
-#define IR_RING_BASE_ADDR_H (IRDA_BASE + 0x04)
-#define IR_RING_BASE_ADDR_L (IRDA_BASE + 0x08)
-#define IR_RING_SIZE (IRDA_BASE + 0x0C)
-#define IR_RING_PROMPT (IRDA_BASE + 0x10)
-#define IR_RING_ADDR_CMPR (IRDA_BASE + 0x14)
-#define IR_INT_CLEAR (IRDA_BASE + 0x18)
-#define IR_CONFIG_1 (IRDA_BASE + 0x20)
-# define IR_RX_INVERT_LED (1 << 0)
-# define IR_TX_INVERT_LED (1 << 1)
-# define IR_ST (1 << 2)
-# define IR_SF (1 << 3)
-# define IR_SIR (1 << 4)
-# define IR_MIR (1 << 5)
-# define IR_FIR (1 << 6)
-# define IR_16CRC (1 << 7)
-# define IR_TD (1 << 8)
-# define IR_RX_ALL (1 << 9)
-# define IR_DMA_ENABLE (1 << 10)
-# define IR_RX_ENABLE (1 << 11)
-# define IR_TX_ENABLE (1 << 12)
-# define IR_LOOPBACK (1 << 14)
-# define IR_SIR_MODE (IR_SIR | IR_DMA_ENABLE | \
- IR_RX_ALL | IR_RX_ENABLE | IR_SF | IR_16CRC)
-#define IR_SIR_FLAGS (IRDA_BASE + 0x24)
-#define IR_ENABLE (IRDA_BASE + 0x28)
-# define IR_RX_STATUS (1 << 9)
-# define IR_TX_STATUS (1 << 10)
-#define IR_READ_PHY_CONFIG (IRDA_BASE + 0x2C)
-#define IR_WRITE_PHY_CONFIG (IRDA_BASE + 0x30)
-#define IR_MAX_PKT_LEN (IRDA_BASE + 0x34)
-#define IR_RX_BYTE_CNT (IRDA_BASE + 0x38)
-#define IR_CONFIG_2 (IRDA_BASE + 0x3C)
-# define IR_MODE_INV (1 << 0)
-# define IR_ONE_PIN (1 << 1)
-#define IR_INTERFACE_CONFIG (IRDA_BASE + 0x40)
+
+/*
+ * The IrDA peripheral has an IRFIRSEL pin, but on the DB/PB boards it's not
+ * used to select FIR/SIR mode on the transceiver but as a GPIO. Instead a
+ * CPLD has to be told about the mode.
+ */
+#define AU1000_IRDA_PHY_MODE_OFF 0
+#define AU1000_IRDA_PHY_MODE_SIR 1
+#define AU1000_IRDA_PHY_MODE_FIR 2
+
+struct au1k_irda_platform_data {
+ void(*set_phy_mode)(int mode);
+};
+
/* GPIO */
#define SYS_PINFUNC 0xB190002C
diff --git a/arch/mips/include/asm/mach-au1x00/au1100_mmc.h b/arch/mips/include/asm/mach-au1x00/au1100_mmc.h
index 94000a3b6f0b..e221659f1bca 100644
--- a/arch/mips/include/asm/mach-au1x00/au1100_mmc.h
+++ b/arch/mips/include/asm/mach-au1x00/au1100_mmc.h
@@ -130,8 +130,10 @@ struct au1xmmc_platform_data {
#define SD_CONFIG2_DF (0x00000008)
#define SD_CONFIG2_DC (0x00000010)
#define SD_CONFIG2_xx2 (0x000000e0)
+#define SD_CONFIG2_BB (0x00000080)
#define SD_CONFIG2_WB (0x00000100)
#define SD_CONFIG2_RW (0x00000200)
+#define SD_CONFIG2_DP (0x00000400)
/*
diff --git a/arch/mips/include/asm/mach-au1x00/au1200fb.h b/arch/mips/include/asm/mach-au1x00/au1200fb.h
new file mode 100644
index 000000000000..b3c87cc64bb9
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1200fb.h
@@ -0,0 +1,14 @@
+/*
+ * platform data for au1200fb driver.
+ */
+
+#ifndef _AU1200FB_PLAT_H_
+#define _AU1200FB_PLAT_H_
+
+struct au1200fb_platdata {
+ int (*panel_index)(void);
+ int (*panel_init)(void);
+ int (*panel_shutdown)(void);
+};
+
+#endif
diff --git a/arch/mips/include/asm/mach-au1x00/au1550nd.h b/arch/mips/include/asm/mach-au1x00/au1550nd.h
new file mode 100644
index 000000000000..ad4c0a03afef
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1550nd.h
@@ -0,0 +1,16 @@
+/*
+ * platform data for the Au1550 NAND driver
+ */
+
+#ifndef _AU1550ND_H_
+#define _AU1550ND_H_
+
+#include <linux/mtd/partitions.h>
+
+struct au1550nd_platdata {
+ struct mtd_partition *parts;
+ int num_parts;
+ int devwidth; /* 0 = 8bit device, 1 = 16bit device */
+};
+
+#endif
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
index 323ce2d145f2..217810e18361 100644
--- a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
@@ -183,6 +183,37 @@ typedef volatile struct au1xxx_ddma_desc {
#define AU1200_DSCR_CMD0_PSC1_SYNC 25
#define AU1200_DSCR_CMD0_CIM_SYNC 26
+#define AU1300_DSCR_CMD0_UART0_TX 0
+#define AU1300_DSCR_CMD0_UART0_RX 1
+#define AU1300_DSCR_CMD0_UART1_TX 2
+#define AU1300_DSCR_CMD0_UART1_RX 3
+#define AU1300_DSCR_CMD0_UART2_TX 4
+#define AU1300_DSCR_CMD0_UART2_RX 5
+#define AU1300_DSCR_CMD0_UART3_TX 6
+#define AU1300_DSCR_CMD0_UART3_RX 7
+#define AU1300_DSCR_CMD0_SDMS_TX0 8
+#define AU1300_DSCR_CMD0_SDMS_RX0 9
+#define AU1300_DSCR_CMD0_SDMS_TX1 10
+#define AU1300_DSCR_CMD0_SDMS_RX1 11
+#define AU1300_DSCR_CMD0_AES_TX 12
+#define AU1300_DSCR_CMD0_AES_RX 13
+#define AU1300_DSCR_CMD0_PSC0_TX 14
+#define AU1300_DSCR_CMD0_PSC0_RX 15
+#define AU1300_DSCR_CMD0_PSC1_TX 16
+#define AU1300_DSCR_CMD0_PSC1_RX 17
+#define AU1300_DSCR_CMD0_PSC2_TX 18
+#define AU1300_DSCR_CMD0_PSC2_RX 19
+#define AU1300_DSCR_CMD0_PSC3_TX 20
+#define AU1300_DSCR_CMD0_PSC3_RX 21
+#define AU1300_DSCR_CMD0_LCD 22
+#define AU1300_DSCR_CMD0_NAND_FLASH 23
+#define AU1300_DSCR_CMD0_SDMS_TX2 24
+#define AU1300_DSCR_CMD0_SDMS_RX2 25
+#define AU1300_DSCR_CMD0_CIM_SYNC 26
+#define AU1300_DSCR_CMD0_UDMA 27
+#define AU1300_DSCR_CMD0_DMA_REQ0 28
+#define AU1300_DSCR_CMD0_DMA_REQ1 29
+
#define DSCR_CMD0_THROTTLE 30
#define DSCR_CMD0_ALWAYS 31
#define DSCR_NDEV_IDS 32
diff --git a/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h b/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h
index d5df0cab9b87..3f741af37d47 100644
--- a/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h
@@ -13,12 +13,14 @@
#define cpu_has_4k_cache 1
#define cpu_has_tx39_cache 0
#define cpu_has_fpu 0
+#define cpu_has_32fpr 0
#define cpu_has_counter 1
#define cpu_has_watch 1
#define cpu_has_divec 1
#define cpu_has_vce 0
#define cpu_has_cache_cdex_p 0
#define cpu_has_cache_cdex_s 0
+#define cpu_has_prefetch 1
#define cpu_has_mcheck 1
#define cpu_has_ejtag 1
#define cpu_has_llsc 1
@@ -29,6 +31,7 @@
#define cpu_has_vtag_icache 0
#define cpu_has_dc_aliases 0
#define cpu_has_ic_fills_f_dc 1
+#define cpu_has_pindexed_dcache 0
#define cpu_has_mips32r1 1
#define cpu_has_mips32r2 0
#define cpu_has_mips64r1 0
diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1300.h b/arch/mips/include/asm/mach-au1x00/gpio-au1300.h
new file mode 100644
index 000000000000..556e1be20bf6
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/gpio-au1300.h
@@ -0,0 +1,241 @@
+/*
+ * gpio-au1300.h -- GPIO control for Au1300 GPIC and compatibles.
+ *
+ * Copyright (c) 2009-2011 Manuel Lauss <manuel.lauss@googlemail.com>
+ */
+
+#ifndef _GPIO_AU1300_H_
+#define _GPIO_AU1300_H_
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/mach-au1x00/au1000.h>
+
+/* with the current GPIC design, up to 128 GPIOs are possible.
+ * The only implementation so far is in the Au1300, which has 75 externally
+ * available GPIOs.
+ */
+#define AU1300_GPIO_BASE 0
+#define AU1300_GPIO_NUM 75
+#define AU1300_GPIO_MAX (AU1300_GPIO_BASE + AU1300_GPIO_NUM - 1)
+
+#define AU1300_GPIC_ADDR \
+ (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR)
+
+static inline int au1300_gpio_get_value(unsigned int gpio)
+{
+ void __iomem *roff = AU1300_GPIC_ADDR;
+ int bit;
+
+ gpio -= AU1300_GPIO_BASE;
+ roff += GPIC_GPIO_BANKOFF(gpio);
+ bit = GPIC_GPIO_TO_BIT(gpio);
+ return __raw_readl(roff + AU1300_GPIC_PINVAL) & bit;
+}
+
+static inline int au1300_gpio_direction_input(unsigned int gpio)
+{
+ void __iomem *roff = AU1300_GPIC_ADDR;
+ unsigned long bit;
+
+ gpio -= AU1300_GPIO_BASE;
+
+ roff += GPIC_GPIO_BANKOFF(gpio);
+ bit = GPIC_GPIO_TO_BIT(gpio);
+ __raw_writel(bit, roff + AU1300_GPIC_DEVCLR);
+ wmb();
+
+ return 0;
+}
+
+static inline int au1300_gpio_set_value(unsigned int gpio, int v)
+{
+ void __iomem *roff = AU1300_GPIC_ADDR;
+ unsigned long bit;
+
+ gpio -= AU1300_GPIO_BASE;
+
+ roff += GPIC_GPIO_BANKOFF(gpio);
+ bit = GPIC_GPIO_TO_BIT(gpio);
+ __raw_writel(bit, roff + (v ? AU1300_GPIC_PINVAL
+ : AU1300_GPIC_PINVALCLR));
+ wmb();
+
+ return 0;
+}
+
+static inline int au1300_gpio_direction_output(unsigned int gpio, int v)
+{
+ /* hw switches to output automatically */
+ return au1300_gpio_set_value(gpio, v);
+}
+
+static inline int au1300_gpio_to_irq(unsigned int gpio)
+{
+ return AU1300_FIRST_INT + (gpio - AU1300_GPIO_BASE);
+}
+
+static inline int au1300_irq_to_gpio(unsigned int irq)
+{
+ return (irq - AU1300_FIRST_INT) + AU1300_GPIO_BASE;
+}
+
+static inline int au1300_gpio_is_valid(unsigned int gpio)
+{
+ int ret;
+
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1300:
+ ret = ((gpio >= AU1300_GPIO_BASE) && (gpio <= AU1300_GPIO_MAX));
+ break;
+ default:
+ ret = 0;
+ }
+ return ret;
+}
+
+static inline int au1300_gpio_cansleep(unsigned int gpio)
+{
+ return 0;
+}
+
+/* hardware remembers gpio 0-63 levels on powerup */
+static inline int au1300_gpio_getinitlvl(unsigned int gpio)
+{
+ void __iomem *roff = AU1300_GPIC_ADDR;
+ unsigned long v;
+
+ if (unlikely(gpio > 63))
+ return 0;
+ else if (gpio > 31) {
+ gpio -= 32;
+ roff += 4;
+ }
+
+ v = __raw_readl(roff + AU1300_GPIC_RSTVAL);
+ return (v >> gpio) & 1;
+}
+
+/**********************************************************************/
+
+/* Linux gpio framework integration.
+*
+* 4 use cases of Alchemy GPIOS:
+*(1) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=y:
+* Board must register gpiochips.
+*(2) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=n:
+* A gpiochip for the 75 GPIOs is registered.
+*
+*(3) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=y:
+* the boards' gpio.h must provide the linux gpio wrapper functions,
+*
+*(4) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=n:
+* inlinable gpio functions are provided which enable access to the
+* Au1300 gpios only by using the numbers straight out of the data-
+* sheets.
+
+* Cases 1 and 3 are intended for boards which want to provide their own
+* GPIO namespace and -operations (i.e. for example you have 8 GPIOs
+* which are in part provided by spare Au1300 GPIO pins and in part by
+* an external FPGA but you still want them to be accssible in linux
+* as gpio0-7. The board can of course use the alchemy_gpioX_* functions
+* as required).
+*/
+
+#ifndef CONFIG_GPIOLIB
+
+#ifdef CONFIG_ALCHEMY_GPIOINT_AU1300
+
+#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT /* case (4) */
+
+static inline int gpio_direction_input(unsigned int gpio)
+{
+ return au1300_gpio_direction_input(gpio);
+}
+
+static inline int gpio_direction_output(unsigned int gpio, int v)
+{
+ return au1300_gpio_direction_output(gpio, v);
+}
+
+static inline int gpio_get_value(unsigned int gpio)
+{
+ return au1300_gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned int gpio, int v)
+{
+ au1300_gpio_set_value(gpio, v);
+}
+
+static inline int gpio_get_value_cansleep(unsigned gpio)
+{
+ return gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value_cansleep(unsigned gpio, int value)
+{
+ gpio_set_value(gpio, value);
+}
+
+static inline int gpio_is_valid(unsigned int gpio)
+{
+ return au1300_gpio_is_valid(gpio);
+}
+
+static inline int gpio_cansleep(unsigned int gpio)
+{
+ return au1300_gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned int gpio)
+{
+ return au1300_gpio_to_irq(gpio);
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+ return au1300_irq_to_gpio(irq);
+}
+
+static inline int gpio_request(unsigned int gpio, const char *label)
+{
+ return 0;
+}
+
+static inline void gpio_free(unsigned int gpio)
+{
+}
+
+static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
+{
+ return -ENOSYS;
+}
+
+static inline void gpio_unexport(unsigned gpio)
+{
+}
+
+static inline int gpio_export(unsigned gpio, bool direction_may_change)
+{
+ return -ENOSYS;
+}
+
+static inline int gpio_sysfs_set_active_low(unsigned gpio, int value)
+{
+ return -ENOSYS;
+}
+
+static inline int gpio_export_link(struct device *dev, const char *name,
+ unsigned gpio)
+{
+ return -ENOSYS;
+}
+
+#endif /* !CONFIG_ALCHEMY_GPIO_INDIRECT */
+
+#endif /* CONFIG_ALCHEMY_GPIOINT_AU1300 */
+
+#endif /* CONFIG GPIOLIB */
+
+#endif /* _GPIO_AU1300_H_ */
diff --git a/arch/mips/include/asm/mach-au1x00/gpio.h b/arch/mips/include/asm/mach-au1x00/gpio.h
index fcdc8c4809db..22e7ff17fc48 100644
--- a/arch/mips/include/asm/mach-au1x00/gpio.h
+++ b/arch/mips/include/asm/mach-au1x00/gpio.h
@@ -12,6 +12,7 @@
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/gpio-au1000.h>
+#include <asm/mach-au1x00/gpio-au1300.h>
/* On Au1000, Au1500 and Au1100 GPIOs won't work as inputs before
* SYS_PININPUTEN is written to at least once. On Au1550/Au1200/Au1300 this
@@ -58,6 +59,8 @@ static inline int __au_irq_to_gpio(unsigned int irq)
switch (alchemy_get_cputype()) {
case ALCHEMY_CPU_AU1000...ALCHEMY_CPU_AU1200:
return alchemy_irq_to_gpio(irq);
+ case ALCHEMY_CPU_AU1300:
+ return au1300_irq_to_gpio(irq);
}
return -EINVAL;
}