summaryrefslogtreecommitdiff
path: root/arch/mips/netlogic
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/netlogic')
-rw-r--r--arch/mips/netlogic/common/earlycons.c2
-rw-r--r--arch/mips/netlogic/common/smpboot.S157
-rw-r--r--arch/mips/netlogic/xlp/Makefile2
-rw-r--r--arch/mips/netlogic/xlp/nlm_hal.c52
-rw-r--r--arch/mips/netlogic/xlp/of.c34
-rw-r--r--arch/mips/netlogic/xlp/platform.c2
-rw-r--r--arch/mips/netlogic/xlp/setup.c16
-rw-r--r--arch/mips/netlogic/xlp/usb-init.c124
-rw-r--r--arch/mips/netlogic/xlr/Makefile2
-rw-r--r--arch/mips/netlogic/xlr/platform-flash.c220
-rw-r--r--arch/mips/netlogic/xlr/platform.c140
-rw-r--r--arch/mips/netlogic/xlr/setup.c2
12 files changed, 694 insertions, 59 deletions
diff --git a/arch/mips/netlogic/common/earlycons.c b/arch/mips/netlogic/common/earlycons.c
index f193f7b3bd81..1902fa22d277 100644
--- a/arch/mips/netlogic/common/earlycons.c
+++ b/arch/mips/netlogic/common/earlycons.c
@@ -54,7 +54,7 @@ void prom_putchar(char c)
#elif defined(CONFIG_CPU_XLR)
uartbase = nlm_mmio_base(NETLOGIC_IO_UART_0_OFFSET);
#endif
- while (nlm_read_reg(uartbase, UART_LSR) == 0)
+ while ((nlm_read_reg(uartbase, UART_LSR) & UART_LSR_THRE) == 0)
;
nlm_write_reg(uartbase, UART_TX, c);
}
diff --git a/arch/mips/netlogic/common/smpboot.S b/arch/mips/netlogic/common/smpboot.S
index c138b1a6dec3..a13355cc97eb 100644
--- a/arch/mips/netlogic/common/smpboot.S
+++ b/arch/mips/netlogic/common/smpboot.S
@@ -54,28 +54,68 @@
XLP_IO_SYS_OFFSET(node) + XLP_IO_PCI_HDRSZ + \
SYS_CPU_NONCOHERENT_MODE * 4
-.macro __config_lsu
- li t0, LSU_DEFEATURE
- mfcr t1, t0
+#define XLP_AX_WORKAROUND /* enable Ax silicon workarounds */
- lui t2, 0x4080 /* Enable Unaligned Access, L2HPE */
- or t1, t1, t2
- li t2, ~0xe /* S1RCM */
+/* Enable XLP features and workarounds in the LSU */
+.macro xlp_config_lsu
+ li t0, LSU_DEFEATURE
+ mfcr t1, t0
+
+ lui t2, 0x4080 /* Enable Unaligned Access, L2HPE */
+ or t1, t1, t2
+#ifdef XLP_AX_WORKAROUND
+ li t2, ~0xe /* S1RCM */
and t1, t1, t2
- mtcr t1, t0
+#endif
+ mtcr t1, t0
- li t0, SCHED_DEFEATURE
- lui t1, 0x0100 /* Experimental: Disable BRU accepting ALU ops */
- mtcr t1, t0
+#ifdef XLP_AX_WORKAROUND
+ li t0, SCHED_DEFEATURE
+ lui t1, 0x0100 /* Disable BRU accepting ALU ops */
+ mtcr t1, t0
+#endif
+.endm
+
+/*
+ * This is the code that will be copied to the reset entry point for
+ * XLR and XLP. The XLP cores start here when they are woken up. This
+ * is also the NMI entry point.
+ */
+.macro xlp_flush_l1_dcache
+ li t0, LSU_DEBUG_DATA0
+ li t1, LSU_DEBUG_ADDR
+ li t2, 0 /* index */
+ li t3, 0x1000 /* loop count */
+1:
+ sll v0, t2, 5
+ mtcr zero, t0
+ ori v1, v0, 0x3 /* way0 | write_enable | write_active */
+ mtcr v1, t1
+2:
+ mfcr v1, t1
+ andi v1, 0x1 /* wait for write_active == 0 */
+ bnez v1, 2b
+ nop
+ mtcr zero, t0
+ ori v1, v0, 0x7 /* way1 | write_enable | write_active */
+ mtcr v1, t1
+3:
+ mfcr v1, t1
+ andi v1, 0x1 /* wait for write_active == 0 */
+ bnez v1, 3b
+ nop
+ addi t2, 1
+ bne t3, t2, 1b
+ nop
.endm
/*
* The cores can come start when they are woken up. This is also the NMI
* entry, so check that first.
*
- * The data corresponding to reset is stored at RESET_DATA_PHYS location,
- * this will have the thread mask (used when core is woken up) and the
- * current NMI handler in case we reached here for an NMI.
+ * The data corresponding to reset/NMI is stored at RESET_DATA_PHYS
+ * location, this will have the thread mask (used when core is woken up)
+ * and the current NMI handler in case we reached here for an NMI.
*
* When a core or thread is newly woken up, it loops in a 'wait'. When
* the CPU really needs waking up, we send an NMI to it, with the NMI
@@ -89,12 +129,12 @@
FEXPORT(nlm_reset_entry)
dmtc0 k0, $22, 6
dmtc0 k1, $22, 7
- mfc0 k0, CP0_STATUS
- li k1, 0x80000
- and k1, k0, k1
- beqz k1, 1f /* go to real reset entry */
+ mfc0 k0, CP0_STATUS
+ li k1, 0x80000
+ and k1, k0, k1
+ beqz k1, 1f /* go to real reset entry */
nop
- li k1, CKSEG1ADDR(RESET_DATA_PHYS) /* NMI */
+ li k1, CKSEG1ADDR(RESET_DATA_PHYS) /* NMI */
ld k0, BOOT_NMI_HANDLER(k1)
jr k0
nop
@@ -114,21 +154,25 @@ FEXPORT(nlm_reset_entry)
li t2, SYS_CPU_COHERENT_BASE(0)
add t2, t2, t3 /* t2 <- SYS offset for node */
lw t1, 0(t2)
- and t1, t1, t0
- sw t1, 0(t2)
+ and t1, t1, t0
+ sw t1, 0(t2)
/* read back to ensure complete */
- lw t1, 0(t2)
+ lw t1, 0(t2)
sync
/* Configure LSU on Non-0 Cores. */
- __config_lsu
+ xlp_config_lsu
+ /* FALL THROUGH */
/*
* Wake up sibling threads from the initial thread in
* a core.
*/
EXPORT(nlm_boot_siblings)
+ /* core L1D flush before enable threads */
+ xlp_flush_l1_dcache
+ /* Enable hw threads by writing to MAP_THREADMODE of the core */
li t0, CKSEG1ADDR(RESET_DATA_PHYS)
lw t1, BOOT_THREAD_MODE(t0) /* t1 <- thread mode */
li t0, ((CPU_BLOCKID_MAP << 8) | MAP_THREADMODE)
@@ -139,31 +183,28 @@ EXPORT(nlm_boot_siblings)
/*
* The new hardware thread starts at the next instruction
* For all the cases other than core 0 thread 0, we will
- * jump to the secondary wait function.
- */
+ * jump to the secondary wait function.
+ */
mfc0 v0, CP0_EBASE, 1
andi v0, 0x7f /* v0 <- node/core */
-#if 1
- /* A0 errata - Write MMU_SETUP after changing thread mode register. */
+ /* Init MMU in the first thread after changing THREAD_MODE
+ * register (Ax Errata?)
+ */
andi v1, v0, 0x3 /* v1 <- thread id */
bnez v1, 2f
nop
- li t0, MMU_SETUP
- li t1, 0
- mtcr t1, t0
- ehb
-#endif
+ li t0, MMU_SETUP
+ li t1, 0
+ mtcr t1, t0
+ _ehb
-2: beqz v0, 4f
+2: beqz v0, 4f /* boot cpu (cpuid == 0)? */
nop
/* setup status reg */
- mfc0 t1, CP0_STATUS
- li t0, ST0_BEV
- or t1, t0
- xor t1, t0
+ move t1, zero
#ifdef CONFIG_64BIT
ori t1, ST0_KX
#endif
@@ -183,9 +224,9 @@ EXPORT(nlm_boot_siblings)
* For the boot CPU, we have to restore registers and
* return
*/
-4: dmfc0 t0, $4, 2 /* restore SP from UserLocal */
+4: dmfc0 t0, $4, 2 /* restore SP from UserLocal */
li t1, 0xfadebeef
- dmtc0 t1, $4, 2 /* restore SP from UserLocal */
+ dmtc0 t1, $4, 2 /* restore SP from UserLocal */
PTR_SUBU sp, t0, PT_SIZE
RESTORE_ALL
jr ra
@@ -193,7 +234,7 @@ EXPORT(nlm_boot_siblings)
EXPORT(nlm_reset_entry_end)
FEXPORT(xlp_boot_core0_siblings) /* "Master" cpu starts from here */
- __config_lsu
+ xlp_config_lsu
dmtc0 sp, $4, 2 /* SP saved in UserLocal */
SAVE_ALL
sync
@@ -210,6 +251,12 @@ FEXPORT(xlp_boot_core0_siblings) /* "Master" cpu starts from here */
__CPUINIT
NESTED(nlm_boot_secondary_cpus, 16, sp)
+ /* Initialize CP0 Status */
+ move t1, zero
+#ifdef CONFIG_64BIT
+ ori t1, ST0_KX
+#endif
+ mtc0 t1, CP0_STATUS
PTR_LA t1, nlm_next_sp
PTR_L sp, 0(t1)
PTR_LA t1, nlm_next_gp
@@ -234,36 +281,36 @@ END(nlm_boot_secondary_cpus)
*/
__CPUINIT
NESTED(nlm_rmiboot_preboot, 16, sp)
- mfc0 t0, $15, 1 # read ebase
- andi t0, 0x1f # t0 has the processor_id()
- andi t2, t0, 0x3 # thread no
- sll t0, 2 # offset in cpu array
+ mfc0 t0, $15, 1 /* read ebase */
+ andi t0, 0x1f /* t0 has the processor_id() */
+ andi t2, t0, 0x3 /* thread num */
+ sll t0, 2 /* offset in cpu array */
- PTR_LA t1, nlm_cpu_ready # mark CPU ready
+ PTR_LA t1, nlm_cpu_ready /* mark CPU ready */
PTR_ADDU t1, t0
li t3, 1
sw t3, 0(t1)
- bnez t2, 1f # skip thread programming
- nop # for non zero hw threads
+ bnez t2, 1f /* skip thread programming */
+ nop /* for thread id != 0 */
/*
- * MMU setup only for first thread in core
+ * XLR MMU setup only for first thread in core
*/
li t0, 0x400
mfcr t1, t0
- li t2, 6 # XLR thread mode mask
+ li t2, 6 /* XLR thread mode mask */
nor t3, t2, zero
- and t2, t1, t2 # t2 - current thread mode
+ and t2, t1, t2 /* t2 - current thread mode */
li v0, CKSEG1ADDR(RESET_DATA_PHYS)
- lw v1, BOOT_THREAD_MODE(v0) # v1 - new thread mode
+ lw v1, BOOT_THREAD_MODE(v0) /* v1 - new thread mode */
sll v1, 1
- beq v1, t2, 1f # same as request value
- nop # nothing to do */
+ beq v1, t2, 1f /* same as request value */
+ nop /* nothing to do */
- and t2, t1, t3 # mask out old thread mode
- or t1, t2, v1 # put in new value
- mtcr t1, t0 # update core control
+ and t2, t1, t3 /* mask out old thread mode */
+ or t1, t2, v1 /* put in new value */
+ mtcr t1, t0 /* update core control */
1: wait
j 1b
diff --git a/arch/mips/netlogic/xlp/Makefile b/arch/mips/netlogic/xlp/Makefile
index b93ed83474ec..6b4b972218f0 100644
--- a/arch/mips/netlogic/xlp/Makefile
+++ b/arch/mips/netlogic/xlp/Makefile
@@ -1,2 +1,4 @@
obj-y += setup.o platform.o nlm_hal.o
+obj-$(CONFIG_OF) += of.o
obj-$(CONFIG_SMP) += wakeup.o
+obj-$(CONFIG_USB) += usb-init.o
diff --git a/arch/mips/netlogic/xlp/nlm_hal.c b/arch/mips/netlogic/xlp/nlm_hal.c
index 9428e7125fed..6c65ac701912 100644
--- a/arch/mips/netlogic/xlp/nlm_hal.c
+++ b/arch/mips/netlogic/xlp/nlm_hal.c
@@ -69,6 +69,32 @@ int nlm_irq_to_irt(int irq)
return PIC_IRT_UART_0_INDEX;
case PIC_UART_1_IRQ:
return PIC_IRT_UART_1_INDEX;
+ case PIC_PCIE_LINK_0_IRQ:
+ return PIC_IRT_PCIE_LINK_0_INDEX;
+ case PIC_PCIE_LINK_1_IRQ:
+ return PIC_IRT_PCIE_LINK_1_INDEX;
+ case PIC_PCIE_LINK_2_IRQ:
+ return PIC_IRT_PCIE_LINK_2_INDEX;
+ case PIC_PCIE_LINK_3_IRQ:
+ return PIC_IRT_PCIE_LINK_3_INDEX;
+ case PIC_EHCI_0_IRQ:
+ return PIC_IRT_EHCI_0_INDEX;
+ case PIC_EHCI_1_IRQ:
+ return PIC_IRT_EHCI_1_INDEX;
+ case PIC_OHCI_0_IRQ:
+ return PIC_IRT_OHCI_0_INDEX;
+ case PIC_OHCI_1_IRQ:
+ return PIC_IRT_OHCI_1_INDEX;
+ case PIC_OHCI_2_IRQ:
+ return PIC_IRT_OHCI_2_INDEX;
+ case PIC_OHCI_3_IRQ:
+ return PIC_IRT_OHCI_3_INDEX;
+ case PIC_MMC_IRQ:
+ return PIC_IRT_MMC_INDEX;
+ case PIC_I2C_0_IRQ:
+ return PIC_IRT_I2C_0_INDEX;
+ case PIC_I2C_1_IRQ:
+ return PIC_IRT_I2C_1_INDEX;
default:
return -1;
}
@@ -81,6 +107,32 @@ int nlm_irt_to_irq(int irt)
return PIC_UART_0_IRQ;
case PIC_IRT_UART_1_INDEX:
return PIC_UART_1_IRQ;
+ case PIC_IRT_PCIE_LINK_0_INDEX:
+ return PIC_PCIE_LINK_0_IRQ;
+ case PIC_IRT_PCIE_LINK_1_INDEX:
+ return PIC_PCIE_LINK_1_IRQ;
+ case PIC_IRT_PCIE_LINK_2_INDEX:
+ return PIC_PCIE_LINK_2_IRQ;
+ case PIC_IRT_PCIE_LINK_3_INDEX:
+ return PIC_PCIE_LINK_3_IRQ;
+ case PIC_IRT_EHCI_0_INDEX:
+ return PIC_EHCI_0_IRQ;
+ case PIC_IRT_EHCI_1_INDEX:
+ return PIC_EHCI_1_IRQ;
+ case PIC_IRT_OHCI_0_INDEX:
+ return PIC_OHCI_0_IRQ;
+ case PIC_IRT_OHCI_1_INDEX:
+ return PIC_OHCI_1_IRQ;
+ case PIC_IRT_OHCI_2_INDEX:
+ return PIC_OHCI_2_IRQ;
+ case PIC_IRT_OHCI_3_INDEX:
+ return PIC_OHCI_3_IRQ;
+ case PIC_IRT_MMC_INDEX:
+ return PIC_MMC_IRQ;
+ case PIC_IRT_I2C_0_INDEX:
+ return PIC_I2C_0_IRQ;
+ case PIC_IRT_I2C_1_INDEX:
+ return PIC_I2C_1_IRQ;
default:
return -1;
}
diff --git a/arch/mips/netlogic/xlp/of.c b/arch/mips/netlogic/xlp/of.c
new file mode 100644
index 000000000000..8e3921c0c201
--- /dev/null
+++ b/arch/mips/netlogic/xlp/of.c
@@ -0,0 +1,34 @@
+#include <linux/bootmem.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of_fdt.h>
+#include <asm/byteorder.h>
+
+static int __init reserve_mem_mach(unsigned long addr, unsigned long size)
+{
+ return reserve_bootmem(addr, size, BOOTMEM_DEFAULT);
+}
+
+void __init free_mem_mach(unsigned long addr, unsigned long size)
+{
+ return free_bootmem(addr, size);
+}
+
+void __init device_tree_init(void)
+{
+ unsigned long base, size;
+
+ if (!initial_boot_params)
+ return;
+
+ base = virt_to_phys((void *)initial_boot_params);
+ size = be32_to_cpu(initial_boot_params->totalsize);
+
+ /* Before we do anything, lets reserve the dt blob */
+ reserve_mem_mach(base, size);
+
+ unflatten_device_tree();
+
+ /* free the space reserved for the dt blob */
+ free_mem_mach(base, size);
+}
diff --git a/arch/mips/netlogic/xlp/platform.c b/arch/mips/netlogic/xlp/platform.c
index 1f5e4cba891d..2c510d585447 100644
--- a/arch/mips/netlogic/xlp/platform.c
+++ b/arch/mips/netlogic/xlp/platform.c
@@ -53,7 +53,7 @@
static unsigned int nlm_xlp_uart_in(struct uart_port *p, int offset)
{
- return nlm_read_reg(p->iobase, offset);
+ return nlm_read_reg(p->iobase, offset);
}
static void nlm_xlp_uart_out(struct uart_port *p, int offset, int value)
diff --git a/arch/mips/netlogic/xlp/setup.c b/arch/mips/netlogic/xlp/setup.c
index b3df7c2aad1e..3dec9f28b65b 100644
--- a/arch/mips/netlogic/xlp/setup.c
+++ b/arch/mips/netlogic/xlp/setup.c
@@ -41,6 +41,8 @@
#include <asm/bootinfo.h>
#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
#include <asm/netlogic/haldefs.h>
#include <asm/netlogic/common.h>
@@ -109,3 +111,17 @@ void __init prom_init(void)
register_smp_ops(&nlm_smp_ops);
#endif
}
+
+static struct of_device_id __initdata xlp_ids[] = {
+ { .compatible = "simple-bus", },
+ {},
+};
+
+int __init xlp8xx_ds_publish_devices(void)
+{
+ if (!of_have_populated_dt())
+ return 0;
+ return of_platform_bus_probe(NULL, xlp_ids, NULL);
+}
+
+device_initcall(xlp8xx_ds_publish_devices);
diff --git a/arch/mips/netlogic/xlp/usb-init.c b/arch/mips/netlogic/xlp/usb-init.c
new file mode 100644
index 000000000000..dbe083a93538
--- /dev/null
+++ b/arch/mips/netlogic/xlp/usb-init.c
@@ -0,0 +1,124 @@
+/*
+ * Copyright (c) 2003-2012 Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/xlp-hal/usb.h>
+
+static void nlm_usb_intr_en(int node, int port)
+{
+ uint32_t val;
+ uint64_t port_addr;
+
+ port_addr = nlm_get_usb_regbase(node, port);
+ val = nlm_read_usb_reg(port_addr, USB_INT_EN);
+ val = USB_CTRL_INTERRUPT_EN | USB_OHCI_INTERRUPT_EN |
+ USB_OHCI_INTERRUPT1_EN | USB_CTRL_INTERRUPT_EN |
+ USB_OHCI_INTERRUPT_EN | USB_OHCI_INTERRUPT2_EN;
+ nlm_write_usb_reg(port_addr, USB_INT_EN, val);
+}
+
+static void nlm_usb_hw_reset(int node, int port)
+{
+ uint64_t port_addr;
+ uint32_t val;
+
+ /* reset USB phy */
+ port_addr = nlm_get_usb_regbase(node, port);
+ val = nlm_read_usb_reg(port_addr, USB_PHY_0);
+ val &= ~(USB_PHY_RESET | USB_PHY_PORT_RESET_0 | USB_PHY_PORT_RESET_1);
+ nlm_write_usb_reg(port_addr, USB_PHY_0, val);
+
+ mdelay(100);
+ val = nlm_read_usb_reg(port_addr, USB_CTL_0);
+ val &= ~(USB_CONTROLLER_RESET);
+ val |= 0x4;
+ nlm_write_usb_reg(port_addr, USB_CTL_0, val);
+}
+
+static int __init nlm_platform_usb_init(void)
+{
+ pr_info("Initializing USB Interface\n");
+ nlm_usb_hw_reset(0, 0);
+ nlm_usb_hw_reset(0, 3);
+
+ /* Enable PHY interrupts */
+ nlm_usb_intr_en(0, 0);
+ nlm_usb_intr_en(0, 3);
+
+ return 0;
+}
+
+arch_initcall(nlm_platform_usb_init);
+
+static u64 xlp_usb_dmamask = ~(u32)0;
+
+/* Fixup the IRQ for USB devices which is exist on XLP SOC PCIE bus */
+static void nlm_usb_fixup_final(struct pci_dev *dev)
+{
+ dev->dev.dma_mask = &xlp_usb_dmamask;
+ dev->dev.coherent_dma_mask = DMA_BIT_MASK(64);
+ switch (dev->devfn) {
+ case 0x10:
+ dev->irq = PIC_EHCI_0_IRQ;
+ break;
+ case 0x11:
+ dev->irq = PIC_OHCI_0_IRQ;
+ break;
+ case 0x12:
+ dev->irq = PIC_OHCI_1_IRQ;
+ break;
+ case 0x13:
+ dev->irq = PIC_EHCI_1_IRQ;
+ break;
+ case 0x14:
+ dev->irq = PIC_OHCI_2_IRQ;
+ break;
+ case 0x15:
+ dev->irq = PIC_OHCI_3_IRQ;
+ break;
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_EHCI,
+ nlm_usb_fixup_final);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_OHCI,
+ nlm_usb_fixup_final);
diff --git a/arch/mips/netlogic/xlr/Makefile b/arch/mips/netlogic/xlr/Makefile
index f01e4d7a0600..c287dea87570 100644
--- a/arch/mips/netlogic/xlr/Makefile
+++ b/arch/mips/netlogic/xlr/Makefile
@@ -1,2 +1,2 @@
-obj-y += setup.o platform.o
+obj-y += setup.o platform.o platform-flash.o
obj-$(CONFIG_SMP) += wakeup.o
diff --git a/arch/mips/netlogic/xlr/platform-flash.c b/arch/mips/netlogic/xlr/platform-flash.c
new file mode 100644
index 000000000000..340ab1601c42
--- /dev/null
+++ b/arch/mips/netlogic/xlr/platform-flash.c
@@ -0,0 +1,220 @@
+/*
+ * Copyright 2011, Netlogic Microsystems.
+ * Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/resource.h>
+#include <linux/spi/flash.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/xlr/iomap.h>
+#include <asm/netlogic/xlr/flash.h>
+#include <asm/netlogic/xlr/bridge.h>
+#include <asm/netlogic/xlr/gpio.h>
+#include <asm/netlogic/xlr/xlr.h>
+
+/*
+ * Default NOR partition layout
+ */
+static struct mtd_partition xlr_nor_parts[] = {
+ {
+ .name = "User FS",
+ .offset = 0x800000,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+/*
+ * Default NAND partition layout
+ */
+static struct mtd_partition xlr_nand_parts[] = {
+ {
+ .name = "Root Filesystem",
+ .offset = 64 * 64 * 2048,
+ .size = 432 * 64 * 2048,
+ },
+ {
+ .name = "Home Filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+/* Use PHYSMAP flash for NOR */
+struct physmap_flash_data xlr_nor_data = {
+ .width = 2,
+ .parts = xlr_nor_parts,
+ .nr_parts = ARRAY_SIZE(xlr_nor_parts),
+};
+
+static struct resource xlr_nor_res[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device xlr_nor_dev = {
+ .name = "physmap-flash",
+ .dev = {
+ .platform_data = &xlr_nor_data,
+ },
+ .num_resources = ARRAY_SIZE(xlr_nor_res),
+ .resource = xlr_nor_res,
+};
+
+const char *xlr_part_probes[] = { "cmdlinepart", NULL };
+
+/*
+ * Use "gen_nand" driver for NAND flash
+ *
+ * There seems to be no way to store a private pointer containing
+ * platform specific info in gen_nand drivier. We will use a global
+ * struct for now, since we currently have only one NAND chip per board.
+ */
+struct xlr_nand_flash_priv {
+ int cs;
+ uint64_t flash_mmio;
+};
+
+static struct xlr_nand_flash_priv nand_priv;
+
+static void xlr_nand_ctrl(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ if (ctrl & NAND_CLE)
+ nlm_write_reg(nand_priv.flash_mmio,
+ FLASH_NAND_CLE(nand_priv.cs), cmd);
+ else if (ctrl & NAND_ALE)
+ nlm_write_reg(nand_priv.flash_mmio,
+ FLASH_NAND_ALE(nand_priv.cs), cmd);
+}
+
+struct platform_nand_data xlr_nand_data = {
+ .chip = {
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(xlr_nand_parts),
+ .chip_delay = 50,
+ .partitions = xlr_nand_parts,
+ .part_probe_types = xlr_part_probes,
+ },
+ .ctrl = {
+ .cmd_ctrl = xlr_nand_ctrl,
+ },
+};
+
+static struct resource xlr_nand_res[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device xlr_nand_dev = {
+ .name = "gen_nand",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(xlr_nand_res),
+ .resource = xlr_nand_res,
+ .dev = {
+ .platform_data = &xlr_nand_data,
+ }
+};
+
+/*
+ * XLR/XLS supports upto 8 devices on its FLASH interface. The value in
+ * FLASH_BAR (on the MEM/IO bridge) gives the base for mapping all the
+ * flash devices.
+ * Under this, each flash device has an offset and size given by the
+ * CSBASE_ADDR and CSBASE_MASK registers for the device.
+ *
+ * The CSBASE_ registers are expected to be setup by the bootloader.
+ */
+static void setup_flash_resource(uint64_t flash_mmio,
+ uint64_t flash_map_base, int cs, struct resource *res)
+{
+ u32 base, mask;
+
+ base = nlm_read_reg(flash_mmio, FLASH_CSBASE_ADDR(cs));
+ mask = nlm_read_reg(flash_mmio, FLASH_CSADDR_MASK(cs));
+
+ res->start = flash_map_base + ((unsigned long)base << 16);
+ res->end = res->start + (mask + 1) * 64 * 1024;
+}
+
+static int __init xlr_flash_init(void)
+{
+ uint64_t gpio_mmio, flash_mmio, flash_map_base;
+ u32 gpio_resetcfg, flash_bar;
+ int cs, boot_nand, boot_nor;
+
+ /* Flash address bits 39:24 is in bridge flash BAR */
+ flash_bar = nlm_read_reg(nlm_io_base, BRIDGE_FLASH_BAR);
+ flash_map_base = (flash_bar & 0xffff0000) << 8;
+
+ gpio_mmio = nlm_mmio_base(NETLOGIC_IO_GPIO_OFFSET);
+ flash_mmio = nlm_mmio_base(NETLOGIC_IO_FLASH_OFFSET);
+
+ /* Get the chip reset config */
+ gpio_resetcfg = nlm_read_reg(gpio_mmio, GPIO_PWRON_RESET_CFG_REG);
+
+ /* Check for boot flash type */
+ boot_nor = boot_nand = 0;
+ if (nlm_chip_is_xls()) {
+ /* On XLS, check boot from NAND bit (GPIO reset reg bit 16) */
+ if (gpio_resetcfg & (1 << 16))
+ boot_nand = 1;
+
+ /* check boot from PCMCIA, (GPIO reset reg bit 15 */
+ if ((gpio_resetcfg & (1 << 15)) == 0)
+ boot_nor = 1; /* not set, booted from NOR */
+ } else { /* XLR */
+ /* check boot from PCMCIA (bit 16 in GPIO reset on XLR) */
+ if ((gpio_resetcfg & (1 << 16)) == 0)
+ boot_nor = 1; /* not set, booted from NOR */
+ }
+
+ /* boot flash at chip select 0 */
+ cs = 0;
+
+ if (boot_nand) {
+ nand_priv.cs = cs;
+ nand_priv.flash_mmio = flash_mmio;
+ setup_flash_resource(flash_mmio, flash_map_base, cs,
+ xlr_nand_res);
+
+ /* Initialize NAND flash at CS 0 */
+ nlm_write_reg(flash_mmio, FLASH_CSDEV_PARM(cs),
+ FLASH_NAND_CSDEV_PARAM);
+ nlm_write_reg(flash_mmio, FLASH_CSTIME_PARMA(cs),
+ FLASH_NAND_CSTIME_PARAMA);
+ nlm_write_reg(flash_mmio, FLASH_CSTIME_PARMB(cs),
+ FLASH_NAND_CSTIME_PARAMB);
+
+ pr_info("ChipSelect %d: NAND Flash %pR\n", cs, xlr_nand_res);
+ return platform_device_register(&xlr_nand_dev);
+ }
+
+ if (boot_nor) {
+ setup_flash_resource(flash_mmio, flash_map_base, cs,
+ xlr_nor_res);
+ pr_info("ChipSelect %d: NOR Flash %pR\n", cs, xlr_nor_res);
+ return platform_device_register(&xlr_nor_dev);
+ }
+ return 0;
+}
+
+arch_initcall(xlr_flash_init);
diff --git a/arch/mips/netlogic/xlr/platform.c b/arch/mips/netlogic/xlr/platform.c
index eab64b45dffd..71b44d82621d 100644
--- a/arch/mips/netlogic/xlr/platform.c
+++ b/arch/mips/netlogic/xlr/platform.c
@@ -14,6 +14,7 @@
#include <linux/resource.h>
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
+#include <linux/i2c.h>
#include <asm/netlogic/haldefs.h>
#include <asm/netlogic/xlr/iomap.h>
@@ -97,3 +98,142 @@ static int __init nlm_uart_init(void)
}
arch_initcall(nlm_uart_init);
+
+#ifdef CONFIG_USB
+/* Platform USB devices, only on XLS chips */
+static u64 xls_usb_dmamask = ~(u32)0;
+#define USB_PLATFORM_DEV(n, i, irq) \
+ { \
+ .name = n, \
+ .id = i, \
+ .num_resources = 2, \
+ .dev = { \
+ .dma_mask = &xls_usb_dmamask, \
+ .coherent_dma_mask = 0xffffffff, \
+ }, \
+ .resource = (struct resource[]) { \
+ { \
+ .flags = IORESOURCE_MEM, \
+ }, \
+ { \
+ .start = irq, \
+ .end = irq, \
+ .flags = IORESOURCE_IRQ, \
+ }, \
+ }, \
+ }
+
+static struct platform_device xls_usb_ehci_device =
+ USB_PLATFORM_DEV("ehci-xls", 0, PIC_USB_IRQ);
+static struct platform_device xls_usb_ohci_device_0 =
+ USB_PLATFORM_DEV("ohci-xls-0", 1, PIC_USB_IRQ);
+static struct platform_device xls_usb_ohci_device_1 =
+ USB_PLATFORM_DEV("ohci-xls-1", 2, PIC_USB_IRQ);
+
+static struct platform_device *xls_platform_devices[] = {
+ &xls_usb_ehci_device,
+ &xls_usb_ohci_device_0,
+ &xls_usb_ohci_device_1,
+};
+
+int xls_platform_usb_init(void)
+{
+ uint64_t usb_mmio, gpio_mmio;
+ unsigned long memres;
+ uint32_t val;
+
+ if (!nlm_chip_is_xls())
+ return 0;
+
+ gpio_mmio = nlm_mmio_base(NETLOGIC_IO_GPIO_OFFSET);
+ usb_mmio = nlm_mmio_base(NETLOGIC_IO_USB_1_OFFSET);
+
+ /* Clear Rogue Phy INTs */
+ nlm_write_reg(usb_mmio, 49, 0x10000000);
+ /* Enable all interrupts */
+ nlm_write_reg(usb_mmio, 50, 0x1f000000);
+
+ /* Enable ports */
+ nlm_write_reg(usb_mmio, 1, 0x07000500);
+
+ val = nlm_read_reg(gpio_mmio, 21);
+ if (((val >> 22) & 0x01) == 0) {
+ pr_info("Detected USB Device mode - Not supported!\n");
+ nlm_write_reg(usb_mmio, 0, 0x01000000);
+ return 0;
+ }
+
+ pr_info("Detected USB Host mode - Adding XLS USB devices.\n");
+ /* Clear reset, host mode */
+ nlm_write_reg(usb_mmio, 0, 0x02000000);
+
+ /* Memory resource for various XLS usb ports */
+ usb_mmio = nlm_mmio_base(NETLOGIC_IO_USB_0_OFFSET);
+ memres = CPHYSADDR((unsigned long)usb_mmio);
+ xls_usb_ehci_device.resource[0].start = memres;
+ xls_usb_ehci_device.resource[0].end = memres + 0x400 - 1;
+
+ memres += 0x400;
+ xls_usb_ohci_device_0.resource[0].start = memres;
+ xls_usb_ohci_device_0.resource[0].end = memres + 0x400 - 1;
+
+ memres += 0x400;
+ xls_usb_ohci_device_1.resource[0].start = memres;
+ xls_usb_ohci_device_1.resource[0].end = memres + 0x400 - 1;
+
+ return platform_add_devices(xls_platform_devices,
+ ARRAY_SIZE(xls_platform_devices));
+}
+
+arch_initcall(xls_platform_usb_init);
+#endif
+
+#ifdef CONFIG_I2C
+static struct i2c_board_info nlm_i2c_board_info1[] __initdata = {
+ /* All XLR boards have this RTC and Max6657 Temp Chip */
+ [0] = {
+ .type = "ds1374",
+ .addr = 0x68
+ },
+ [1] = {
+ .type = "lm90",
+ .addr = 0x4c
+ },
+};
+
+static struct resource i2c_resources[] = {
+ [0] = {
+ .start = 0, /* filled at init */
+ .end = 0,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device nlm_xlr_i2c_1 = {
+ .name = "xlr-i2cbus",
+ .id = 1,
+ .num_resources = 1,
+ .resource = i2c_resources,
+};
+
+static int __init nlm_i2c_init(void)
+{
+ int err = 0;
+ unsigned int offset;
+
+ /* I2C bus 0 does not have any useful devices, configure only bus 1 */
+ offset = NETLOGIC_IO_I2C_1_OFFSET;
+ nlm_xlr_i2c_1.resource[0].start = CPHYSADDR(nlm_mmio_base(offset));
+ nlm_xlr_i2c_1.resource[0].end = nlm_xlr_i2c_1.resource[0].start + 0xfff;
+
+ platform_device_register(&nlm_xlr_i2c_1);
+
+ err = i2c_register_board_info(1, nlm_i2c_board_info1,
+ ARRAY_SIZE(nlm_i2c_board_info1));
+ if (err < 0)
+ pr_err("nlm-i2c: cannot register board I2C devices\n");
+ return err;
+}
+
+arch_initcall(nlm_i2c_init);
+#endif
diff --git a/arch/mips/netlogic/xlr/setup.c b/arch/mips/netlogic/xlr/setup.c
index c9d066dedc4e..81b1d311834f 100644
--- a/arch/mips/netlogic/xlr/setup.c
+++ b/arch/mips/netlogic/xlr/setup.c
@@ -85,7 +85,7 @@ static void nlm_linux_exit(void)
gpiobase = nlm_mmio_base(NETLOGIC_IO_GPIO_OFFSET);
/* trigger a chip reset by writing 1 to GPIO_SWRESET_REG */
- nlm_write_reg(gpiobase, NETLOGIC_GPIO_SWRESET_REG, 1);
+ nlm_write_reg(gpiobase, GPIO_SWRESET_REG, 1);
for ( ; ; )
cpu_wait();
}