diff options
Diffstat (limited to 'arch/mips/sgi-ip27')
| -rw-r--r-- | arch/mips/sgi-ip27/ip27-berr.c | 4 | ||||
| -rw-r--r-- | arch/mips/sgi-ip27/ip27-console.c | 2 | ||||
| -rw-r--r-- | arch/mips/sgi-ip27/ip27-hubio.c | 14 | ||||
| -rw-r--r-- | arch/mips/sgi-ip27/ip27-init.c | 2 | ||||
| -rw-r--r-- | arch/mips/sgi-ip27/ip27-irq.c | 6 | ||||
| -rw-r--r-- | arch/mips/sgi-ip27/ip27-memory.c | 12 | ||||
| -rw-r--r-- | arch/mips/sgi-ip27/ip27-nmi.c | 6 | ||||
| -rw-r--r-- | arch/mips/sgi-ip27/ip27-reset.c | 2 | ||||
| -rw-r--r-- | arch/mips/sgi-ip27/ip27-smp.c | 4 | ||||
| -rw-r--r-- | arch/mips/sgi-ip27/ip27-timer.c | 6 | ||||
| -rw-r--r-- | arch/mips/sgi-ip27/ip27-xtalk.c | 16 |
11 files changed, 37 insertions, 37 deletions
diff --git a/arch/mips/sgi-ip27/ip27-berr.c b/arch/mips/sgi-ip27/ip27-berr.c index 04cebadc2b3c..692778da9e76 100644 --- a/arch/mips/sgi-ip27/ip27-berr.c +++ b/arch/mips/sgi-ip27/ip27-berr.c @@ -39,7 +39,7 @@ static void dump_hub_information(unsigned long errst0, unsigned long errst1) printk("Hub has valid error information:\n"); if (errst0 & PI_ERR_ST0_OVERRUN_MASK) - printk("Overrun is set. Error stack may contain additional " + printk("Overrun is set. Error stack may contain additional " "information.\n"); printk("Hub error address is %08lx\n", (errst0 & PI_ERR_ST0_ADDR_MASK) >> (PI_ERR_ST0_ADDR_SHFT - 3)); @@ -85,7 +85,7 @@ void __init ip27_be_init(void) board_be_handler = ip27_be_handler; LOCAL_HUB_S(PI_ERR_INT_PEND, - cpu ? PI_ERR_CLEAR_ALL_B : PI_ERR_CLEAR_ALL_A); + cpu ? PI_ERR_CLEAR_ALL_B : PI_ERR_CLEAR_ALL_A); LOCAL_HUB_S(PI_ERR_INT_MASK_A + cpuoff, 0); LOCAL_HUB_S(PI_ERR_STACK_ADDR_A + cpuoff, 0); LOCAL_HUB_S(PI_ERR_STACK_SIZE, 0); /* Disable error stack */ diff --git a/arch/mips/sgi-ip27/ip27-console.c b/arch/mips/sgi-ip27/ip27-console.c index 984e561f0f7a..b952d5b1af86 100644 --- a/arch/mips/sgi-ip27/ip27-console.c +++ b/arch/mips/sgi-ip27/ip27-console.c @@ -31,7 +31,7 @@ static inline struct ioc3_uartregs *console_uart(void) return &ioc3->sregs.uarta; } -void __init prom_putchar(char c) +void prom_putchar(char c) { struct ioc3_uartregs *uart = console_uart(); diff --git a/arch/mips/sgi-ip27/ip27-hubio.c b/arch/mips/sgi-ip27/ip27-hubio.c index cd0d5b06cd83..328ceb3c86ec 100644 --- a/arch/mips/sgi-ip27/ip27-hubio.c +++ b/arch/mips/sgi-ip27/ip27-hubio.c @@ -17,11 +17,11 @@ static int force_fire_and_forget = 1; /** - * hub_pio_map - establish a HUB PIO mapping + * hub_pio_map - establish a HUB PIO mapping * * @hub: hub to perform PIO mapping on * @widget: widget ID to perform PIO mapping for - * @xtalk_addr: xtalk_address that needs to be mapped + * @xtalk_addr: xtalk_address that needs to be mapped * @size: size of the PIO mapping * **/ @@ -78,8 +78,8 @@ unsigned long hub_pio_map(cnodeid_t cnode, xwidgetnum_t widget, /* * hub_setup_prb(nasid, prbnum, credits, conveyor) * - * Put a PRB into fire-and-forget mode if conveyor isn't set. Otherwise, - * put it into conveyor belt mode with the specified number of credits. + * Put a PRB into fire-and-forget mode if conveyor isn't set. Otherwise, + * put it into conveyor belt mode with the specified number of credits. */ static void hub_setup_prb(nasid_t nasid, int prbnum, int credits) { @@ -125,12 +125,12 @@ static void hub_setup_prb(nasid_t nasid, int prbnum, int credits) * so we turn off access to all widgets for the duration of the function. * * XXX - This code should really check what kind of widget we're talking - * to. Bridges can only handle three requests, but XG will do more. + * to. Bridges can only handle three requests, but XG will do more. * How many can crossbow handle to widget 0? We're assuming 1. * * XXX - There is a bug in the crossbow that link reset PIOs do not * return write responses. The easiest solution to this problem is to - * leave widget 0 (xbow) in fire-and-forget mode at all times. This + * leave widget 0 (xbow) in fire-and-forget mode at all times. This * only affects pio's to xbow registers, which should be rare. **/ static void hub_set_piomode(nasid_t nasid) @@ -167,7 +167,7 @@ static void hub_set_piomode(nasid_t nasid) } /* - * hub_pio_init - PIO-related hub initialization + * hub_pio_init - PIO-related hub initialization * * @hub: hubinfo structure for our hub */ diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c index 923c080f77bd..d41b1c6fb032 100644 --- a/arch/mips/sgi-ip27/ip27-init.c +++ b/arch/mips/sgi-ip27/ip27-init.c @@ -151,7 +151,7 @@ nasid_t get_nasid(void) { return (nasid_t)((LOCAL_HUB_L(NI_STATUS_REV_ID) & NSRI_NODEID_MASK) - >> NSRI_NODEID_SHFT); + >> NSRI_NODEID_SHFT); } /* diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c index 69a939ae65e4..2315cfeb2687 100644 --- a/arch/mips/sgi-ip27/ip27-irq.c +++ b/arch/mips/sgi-ip27/ip27-irq.c @@ -62,7 +62,7 @@ extern int irq_to_slot[]; * from the irq value */ #define IRQ_TO_BRIDGE(i) irq_to_bridge[(i)] -#define SLOT_FROM_PCI_IRQ(i) irq_to_slot[i] +#define SLOT_FROM_PCI_IRQ(i) irq_to_slot[i] static inline int alloc_level(int cpu, int irq) { @@ -281,11 +281,11 @@ static unsigned int startup_bridge_irq(struct irq_data *d) device |= (pin << (pin*3)); bridge->b_int_device = device; - bridge->b_wid_tflush; + bridge->b_wid_tflush; intr_connect_level(cpu, swlevel); - return 0; /* Never anything pending. */ + return 0; /* Never anything pending. */ } /* Shutdown one of the (PCI ...) IRQs routes over a bridge. */ diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c index cd8fcab6b054..3505d08ff2fd 100644 --- a/arch/mips/sgi-ip27/ip27-memory.c +++ b/arch/mips/sgi-ip27/ip27-memory.c @@ -31,8 +31,8 @@ #include <asm/sn/sn_private.h> -#define SLOT_PFNSHIFT (SLOT_SHIFT - PAGE_SHIFT) -#define PFN_NASIDSHFT (NASID_SHFT - PAGE_SHIFT) +#define SLOT_PFNSHIFT (SLOT_SHIFT - PAGE_SHIFT) +#define PFN_NASIDSHFT (NASID_SHFT - PAGE_SHIFT) struct node_data *__node_data[MAX_COMPACT_NODES]; @@ -43,7 +43,7 @@ static int fine_mode; static int is_fine_dirmode(void) { return (((LOCAL_HUB_L(NI_STATUS_REV_ID) & NSRI_REGIONSIZE_MASK) - >> NSRI_REGIONSIZE_SHFT) & REGIONSIZE_FINE); + >> NSRI_REGIONSIZE_SHFT) & REGIONSIZE_FINE); } static hubreg_t get_region(cnodeid_t cnode) @@ -66,7 +66,7 @@ static void gen_region_mask(hubreg_t *region_mask) } } -#define rou_rflag rou_flags +#define rou_rflag rou_flags static int router_distance; @@ -412,7 +412,7 @@ static void __init node_mem_init(cnodeid_t node) slot_freepfn += PFN_UP(sizeof(struct pglist_data) + sizeof(struct hub_data)); - bootmap_size = init_bootmem_node(NODE_DATA(node), slot_freepfn, + bootmap_size = init_bootmem_node(NODE_DATA(node), slot_freepfn, start_pfn, end_pfn); free_bootmem_with_active_regions(node, end_pfn); reserve_bootmem_node(NODE_DATA(node), slot_firstpfn << PAGE_SHIFT, @@ -422,7 +422,7 @@ static void __init node_mem_init(cnodeid_t node) } /* - * A node with nothing. We use it to avoid any special casing in + * A node with nothing. We use it to avoid any special casing in * cpumask_of_node */ static struct node_data null_node = { diff --git a/arch/mips/sgi-ip27/ip27-nmi.c b/arch/mips/sgi-ip27/ip27-nmi.c index 005c29ed419a..a2358b44420c 100644 --- a/arch/mips/sgi-ip27/ip27-nmi.c +++ b/arch/mips/sgi-ip27/ip27-nmi.c @@ -54,7 +54,7 @@ void install_cpu_nmi_handler(int slice) void nmi_cpu_eframe_save(nasid_t nasid, int slice) { struct reg_struct *nr; - int i; + int i; /* Get the pointer to the current cpu's register set. */ nr = (struct reg_struct *) @@ -86,12 +86,12 @@ void nmi_cpu_eframe_save(nasid_t nasid, int slice) printk("%s\n", print_tainted()); printk("ErrEPC: %016lx %pS\n", nr->error_epc, (void *) nr->error_epc); printk("ra : %016lx %pS\n", nr->gpr[31], (void *) nr->gpr[31]); - printk("Status: %08lx ", nr->sr); + printk("Status: %08lx ", nr->sr); if (nr->sr & ST0_KX) printk("KX "); if (nr->sr & ST0_SX) - printk("SX "); + printk("SX "); if (nr->sr & ST0_UX) printk("UX "); diff --git a/arch/mips/sgi-ip27/ip27-reset.c b/arch/mips/sgi-ip27/ip27-reset.c index f347bc6b7954..ac37e54b3d5e 100644 --- a/arch/mips/sgi-ip27/ip27-reset.c +++ b/arch/mips/sgi-ip27/ip27-reset.c @@ -29,7 +29,7 @@ void machine_restart(char *command) __attribute__((noreturn)); void machine_halt(void) __attribute__((noreturn)); void machine_power_off(void) __attribute__((noreturn)); -#define noreturn while(1); /* Silence gcc. */ +#define noreturn while(1); /* Silence gcc. */ /* XXX How to pass the reboot command to the firmware??? */ static void ip27_machine_restart(char *command) diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c index 735b43bf8f82..f94638141b20 100644 --- a/arch/mips/sgi-ip27/ip27-smp.c +++ b/arch/mips/sgi-ip27/ip27-smp.c @@ -191,7 +191,7 @@ static void __init ip27_cpus_done(void) } /* - * Launch a slave into smp_bootstrap(). It doesn't take an argument, and we + * Launch a slave into smp_bootstrap(). It doesn't take an argument, and we * set sp to the kernel stack of the newly created idle process, gp to the proc * struct so that current_thread_info() will work. */ @@ -219,7 +219,7 @@ static void __init ip27_smp_setup(void) /* * Assumption to be fixed: we're always booted on logical / physical - * processor 0. While we're always running on logical processor 0 + * processor 0. While we're always running on logical processor 0 * this still means this is physical processor zero; it might for * example be disabled in the firmware. */ diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c index 13cfeab50528..fff58ac176f3 100644 --- a/arch/mips/sgi-ip27/ip27-timer.c +++ b/arch/mips/sgi-ip27/ip27-timer.c @@ -117,8 +117,8 @@ void __cpuinit hub_rt_clock_event_init(void) cd->name = name; cd->features = CLOCK_EVT_FEAT_ONESHOT; clockevent_set_clock(cd, CYCLES_PER_SEC); - cd->max_delta_ns = clockevent_delta2ns(0xfffffffffffff, cd); - cd->min_delta_ns = clockevent_delta2ns(0x300, cd); + cd->max_delta_ns = clockevent_delta2ns(0xfffffffffffff, cd); + cd->min_delta_ns = clockevent_delta2ns(0x300, cd); cd->rating = 200; cd->irq = irq; cd->cpumask = cpumask_of(cpu); @@ -153,7 +153,7 @@ static cycle_t hub_rt_read(struct clocksource *cs) struct clocksource hub_rt_clocksource = { .name = "HUB-RT", - .rating = 200, + .rating = 200, .read = hub_rt_read, .mask = CLOCKSOURCE_MASK(52), .flags = CLOCK_SOURCE_IS_CONTINUOUS, diff --git a/arch/mips/sgi-ip27/ip27-xtalk.c b/arch/mips/sgi-ip27/ip27-xtalk.c index 5e871e75a8d9..a4df7d0f6f12 100644 --- a/arch/mips/sgi-ip27/ip27-xtalk.c +++ b/arch/mips/sgi-ip27/ip27-xtalk.c @@ -17,15 +17,15 @@ #include <asm/xtalk/xtalk.h> -#define XBOW_WIDGET_PART_NUM 0x0 -#define XXBOW_WIDGET_PART_NUM 0xd000 /* Xbow in Xbridge */ -#define BASE_XBOW_PORT 8 /* Lowest external port */ +#define XBOW_WIDGET_PART_NUM 0x0 +#define XXBOW_WIDGET_PART_NUM 0xd000 /* Xbow in Xbridge */ +#define BASE_XBOW_PORT 8 /* Lowest external port */ extern int bridge_probe(nasid_t nasid, int widget, int masterwid); static int __cpuinit probe_one_port(nasid_t nasid, int widget, int masterwid) { - widgetreg_t widget_id; + widgetreg_t widget_id; xwidget_part_num_t partnum; widget_id = *(volatile widgetreg_t *) @@ -102,10 +102,10 @@ static int __cpuinit xbow_probe(nasid_t nasid) void __cpuinit xtalk_probe_node(cnodeid_t nid) { - volatile u64 hubreg; - nasid_t nasid; + volatile u64 hubreg; + nasid_t nasid; xwidget_part_num_t partnum; - widgetreg_t widget_id; + widgetreg_t widget_id; nasid = COMPACT_TO_NASID_NODEID(nid); hubreg = REMOTE_HUB_L(nasid, IIO_LLP_CSR); @@ -115,7 +115,7 @@ void __cpuinit xtalk_probe_node(cnodeid_t nid) return; widget_id = *(volatile widgetreg_t *) - (RAW_NODE_SWIN_BASE(nasid, 0x0) + WIDGET_ID); + (RAW_NODE_SWIN_BASE(nasid, 0x0) + WIDGET_ID); partnum = XWIDGET_PART_NUM(widget_id); printk(KERN_INFO "Cpu %d, Nasid 0x%x: partnum 0x%x is ", |