diff options
Diffstat (limited to 'arch/mips/txx9/jmr3927/setup.c')
-rw-r--r-- | arch/mips/txx9/jmr3927/setup.c | 375 |
1 files changed, 375 insertions, 0 deletions
diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c new file mode 100644 index 000000000000..5e35ef73c5a5 --- /dev/null +++ b/arch/mips/txx9/jmr3927/setup.c @@ -0,0 +1,375 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Copyright 2001 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * ahennessy@mvista.com + * + * Copyright (C) 2000-2001 Toshiba Corporation + * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/ioport.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#ifdef CONFIG_SERIAL_TXX9 +#include <linux/serial_core.h> +#endif +#include <asm/txx9tmr.h> +#include <asm/txx9pio.h> +#include <asm/reboot.h> +#include <asm/txx9/generic.h> +#include <asm/txx9/pci.h> +#include <asm/txx9/jmr3927.h> +#include <asm/mipsregs.h> + +extern void puts(const char *cp); + +/* don't enable - see errata */ +static int jmr3927_ccfg_toeon; + +static inline void do_reset(void) +{ +#if 1 /* Resetting PCI bus */ + jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); + jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, JMR3927_IOC_RESET_ADDR); + (void)jmr3927_ioc_reg_in(JMR3927_IOC_RESET_ADDR); /* flush WB */ + mdelay(1); + jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); +#endif + jmr3927_ioc_reg_out(JMR3927_IOC_RESET_CPU, JMR3927_IOC_RESET_ADDR); +} + +static void jmr3927_machine_restart(char *command) +{ + local_irq_disable(); + puts("Rebooting..."); + do_reset(); +} + +static void jmr3927_machine_halt(void) +{ + puts("JMR-TX3927 halted.\n"); + while (1); +} + +static void jmr3927_machine_power_off(void) +{ + puts("JMR-TX3927 halted. Please turn off the power.\n"); + while (1); +} + +static void __init jmr3927_time_init(void) +{ + txx9_clockevent_init(TX3927_TMR_REG(0), + TXX9_IRQ_BASE + JMR3927_IRQ_IRC_TMR(0), + JMR3927_IMCLK); + txx9_clocksource_init(TX3927_TMR_REG(1), JMR3927_IMCLK); +} + +#define DO_WRITE_THROUGH +#define DO_ENABLE_CACHE + +static void jmr3927_board_init(void); + +static void __init jmr3927_mem_setup(void) +{ + char *argptr; + + set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO); + + _machine_restart = jmr3927_machine_restart; + _machine_halt = jmr3927_machine_halt; + pm_power_off = jmr3927_machine_power_off; + + /* + * IO/MEM resources. + */ + ioport_resource.start = 0; + ioport_resource.end = 0xffffffff; + iomem_resource.start = 0; + iomem_resource.end = 0xffffffff; + + /* Reboot on panic */ + panic_timeout = 180; + + /* cache setup */ + { + unsigned int conf; +#ifdef DO_ENABLE_CACHE + int mips_ic_disable = 0, mips_dc_disable = 0; +#else + int mips_ic_disable = 1, mips_dc_disable = 1; +#endif +#ifdef DO_WRITE_THROUGH + int mips_config_cwfon = 0; + int mips_config_wbon = 0; +#else + int mips_config_cwfon = 1; + int mips_config_wbon = 1; +#endif + + conf = read_c0_conf(); + conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE | TX39_CONF_WBON | TX39_CONF_CWFON); + conf |= mips_ic_disable ? 0 : TX39_CONF_ICE; + conf |= mips_dc_disable ? 0 : TX39_CONF_DCE; + conf |= mips_config_wbon ? TX39_CONF_WBON : 0; + conf |= mips_config_cwfon ? TX39_CONF_CWFON : 0; + + write_c0_conf(conf); + write_c0_cache(0); + } + + /* initialize board */ + jmr3927_board_init(); + + argptr = prom_getcmdline(); + + if ((argptr = strstr(argptr, "toeon")) != NULL) + jmr3927_ccfg_toeon = 1; + argptr = prom_getcmdline(); + if ((argptr = strstr(argptr, "ip=")) == NULL) { + argptr = prom_getcmdline(); + strcat(argptr, " ip=bootp"); + } + +#ifdef CONFIG_SERIAL_TXX9 + { + extern int early_serial_txx9_setup(struct uart_port *port); + int i; + struct uart_port req; + for(i = 0; i < 2; i++) { + memset(&req, 0, sizeof(req)); + req.line = i; + req.iotype = UPIO_MEM; + req.membase = (unsigned char __iomem *)TX3927_SIO_REG(i); + req.mapbase = TX3927_SIO_REG(i); + req.irq = i == 0 ? + JMR3927_IRQ_IRC_SIO0 : JMR3927_IRQ_IRC_SIO1; + if (i == 0) + req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; + req.uartclk = JMR3927_IMCLK; + early_serial_txx9_setup(&req); + } + } +#ifdef CONFIG_SERIAL_TXX9_CONSOLE + argptr = prom_getcmdline(); + if ((argptr = strstr(argptr, "console=")) == NULL) { + argptr = prom_getcmdline(); + strcat(argptr, " console=ttyS1,115200"); + } +#endif +#endif +} + +static void tx3927_setup(void); + +static void __init jmr3927_pci_setup(void) +{ +#ifdef CONFIG_PCI + int extarb = !(tx3927_ccfgptr->ccfg & TX3927_CCFG_PCIXARB); + struct pci_controller *c; + + c = txx9_alloc_pci_controller(&txx9_primary_pcic, + JMR3927_PCIMEM, JMR3927_PCIMEM_SIZE, + JMR3927_PCIIO, JMR3927_PCIIO_SIZE); + register_pci_controller(c); + if (!extarb) { + /* Reset PCI Bus */ + jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); + udelay(100); + jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, + JMR3927_IOC_RESET_ADDR); + udelay(100); + jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); + } + tx3927_pcic_setup(c, JMR3927_SDRAM_SIZE, extarb); +#endif /* CONFIG_PCI */ +} + +static void __init jmr3927_board_init(void) +{ + tx3927_setup(); + jmr3927_pci_setup(); + + /* SIO0 DTR on */ + jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR); + + jmr3927_led_set(0); + + printk("JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n", + jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK, + jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK, + jmr3927_dipsw1(), jmr3927_dipsw2(), + jmr3927_dipsw3(), jmr3927_dipsw4()); +} + +static void __init tx3927_setup(void) +{ + int i; + + txx9_cpu_clock = JMR3927_CORECLK; + txx9_gbus_clock = JMR3927_GBUSCLK; + /* SDRAMC are configured by PROM */ + + /* ROMC */ + tx3927_romcptr->cr[1] = JMR3927_ROMCE1 | 0x00030048; + tx3927_romcptr->cr[2] = JMR3927_ROMCE2 | 0x000064c8; + tx3927_romcptr->cr[3] = JMR3927_ROMCE3 | 0x0003f698; + tx3927_romcptr->cr[5] = JMR3927_ROMCE5 | 0x0000f218; + + /* CCFG */ + /* enable Timeout BusError */ + if (jmr3927_ccfg_toeon) + tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE; + + /* clear BusErrorOnWrite flag */ + tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW; + /* Disable PCI snoop */ + tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP; + /* do reset on watchdog */ + tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR; + +#ifdef DO_WRITE_THROUGH + /* Enable PCI SNOOP - with write through only */ + tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP; +#endif + + /* Pin selection */ + tx3927_ccfgptr->pcfg &= ~TX3927_PCFG_SELALL; + tx3927_ccfgptr->pcfg |= + TX3927_PCFG_SELSIOC(0) | TX3927_PCFG_SELSIO_ALL | + (TX3927_PCFG_SELDMA_ALL & ~TX3927_PCFG_SELDMA(1)); + + printk("TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n", + tx3927_ccfgptr->crir, + tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg); + + /* TMR */ + for (i = 0; i < TX3927_NR_TMR; i++) + txx9_tmr_init(TX3927_TMR_REG(i)); + + /* DMA */ + tx3927_dmaptr->mcr = 0; + for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) { + /* reset channel */ + tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST; + tx3927_dmaptr->ch[i].ccr = 0; + } + /* enable DMA */ +#ifdef __BIG_ENDIAN + tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN; +#else + tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE; +#endif + + /* PIO */ + /* PIO[15:12] connected to LEDs */ + __raw_writel(0x0000f000, &tx3927_pioptr->dir); + __raw_writel(0, &tx3927_pioptr->maskcpu); + __raw_writel(0, &tx3927_pioptr->maskext); + txx9_gpio_init(TX3927_PIO_REG, 0, 16); + gpio_request(11, "dipsw1"); + gpio_request(10, "dipsw2"); + { + unsigned int conf; + + conf = read_c0_conf(); + if (!(conf & TX39_CONF_ICE)) + printk("TX3927 I-Cache disabled.\n"); + if (!(conf & TX39_CONF_DCE)) + printk("TX3927 D-Cache disabled.\n"); + else if (!(conf & TX39_CONF_WBON)) + printk("TX3927 D-Cache WriteThrough.\n"); + else if (!(conf & TX39_CONF_CWFON)) + printk("TX3927 D-Cache WriteBack.\n"); + else + printk("TX3927 D-Cache WriteBack (CWF) .\n"); + } +} + +/* This trick makes rtc-ds1742 driver usable as is. */ +static unsigned long jmr3927_swizzle_addr_b(unsigned long port) +{ + if ((port & 0xffff0000) != JMR3927_IOC_NVRAMB_ADDR) + return port; + port = (port & 0xffff0000) | (port & 0x7fff << 1); +#ifdef __BIG_ENDIAN + return port; +#else + return port | 1; +#endif +} + +static int __init jmr3927_rtc_init(void) +{ + static struct resource __initdata res = { + .start = JMR3927_IOC_NVRAMB_ADDR - IO_BASE, + .end = JMR3927_IOC_NVRAMB_ADDR - IO_BASE + 0x800 - 1, + .flags = IORESOURCE_MEM, + }; + struct platform_device *dev; + dev = platform_device_register_simple("rtc-ds1742", -1, &res, 1); + return IS_ERR(dev) ? PTR_ERR(dev) : 0; +} + +/* Watchdog support */ + +static int __init txx9_wdt_init(unsigned long base) +{ + struct resource res = { + .start = base, + .end = base + 0x100 - 1, + .flags = IORESOURCE_MEM, + }; + struct platform_device *dev = + platform_device_register_simple("txx9wdt", -1, &res, 1); + return IS_ERR(dev) ? PTR_ERR(dev) : 0; +} + +static int __init jmr3927_wdt_init(void) +{ + return txx9_wdt_init(TX3927_TMR_REG(2)); +} + +static void __init jmr3927_device_init(void) +{ + __swizzle_addr_b = jmr3927_swizzle_addr_b; + jmr3927_rtc_init(); + jmr3927_wdt_init(); +} + +struct txx9_board_vec jmr3927_vec __initdata = { + .system = "Toshiba JMR_TX3927", + .prom_init = jmr3927_prom_init, + .mem_setup = jmr3927_mem_setup, + .irq_setup = jmr3927_irq_setup, + .time_init = jmr3927_time_init, + .device_init = jmr3927_device_init, +#ifdef CONFIG_PCI + .pci_map_irq = jmr3927_pci_map_irq, +#endif +}; |