diff options
Diffstat (limited to 'arch/parisc')
33 files changed, 2350 insertions, 1451 deletions
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 0b07922a2ac6..874a283edb95 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -47,10 +47,10 @@ config PM config ISA_DMA_API bool - default y config ARCH_MAY_HAVE_PC_FDC bool + depends on BROKEN default y source "init/Kconfig" @@ -154,13 +154,14 @@ config HOTPLUG_CPU config ARCH_DISCONTIGMEM_ENABLE bool "Discontiguous memory support (EXPERIMENTAL)" - depends on EXPERIMENTAL + depends on 64BIT && EXPERIMENTAL help Say Y to support efficient handling of discontiguous physical memory, for architectures which are either NUMA (Non-Uniform Memory Access) or have huge holes in the physical address space for other reasons. See <file:Documentation/vm/numa> for more. +source "kernel/Kconfig.hz" source "mm/Kconfig" config PREEMPT diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile index 3b339b1cce13..9b7e42490dd1 100644 --- a/arch/parisc/Makefile +++ b/arch/parisc/Makefile @@ -20,7 +20,8 @@ NM = sh $(srctree)/arch/parisc/nm CHECKFLAGS += -D__hppa__=1 ifdef CONFIG_64BIT -CROSS_COMPILE := hppa64-linux- +CROSS_COMPILE := $(shell if [ -x /usr/bin/hppa64-linux-gnu-gcc ]; then \ + echo hppa64-linux-gnu-; else echo hppa64-linux-; fi) UTS_MACHINE := parisc64 CHECKFLAGS += -D__LP64__=1 -m64 else @@ -34,6 +35,14 @@ FINAL_LD=$(CROSS_COMPILE)ld --warn-common --warn-section-align OBJCOPY_FLAGS =-O binary -R .note -R .comment -S +GCC_VERSION := $(call cc-version) +ifneq ($(shell if [ -z $(GCC_VERSION) ] ; then echo "bad"; fi ;),) +$(error Sorry, couldn't find ($(cc-version)).) +endif +ifneq ($(shell if [ $(GCC_VERSION) -lt 0303 ] ; then echo "bad"; fi ;),) +$(error Sorry, your compiler is too old ($(GCC_VERSION)). GCC v3.3 or above is required.) +endif + cflags-y := -pipe # These flags should be implied by an hppa-linux configuration, but they @@ -43,7 +52,7 @@ cflags-y += -mno-space-regs -mfast-indirect-calls # Currently we save and restore fpregs on all kernel entry/interruption paths. # If that gets optimized, we might need to disable the use of fpregs in the # kernel. -#cflags-y += -mdisable-fpregs +cflags-y += -mdisable-fpregs # Without this, "ld -r" results in .text sections that are too big # (> 0x40000) for branches to reach stubs. diff --git a/arch/parisc/configs/712_defconfig b/arch/parisc/configs/712_defconfig index 6efaa9293eef..3e013f55df64 100644 --- a/arch/parisc/configs/712_defconfig +++ b/arch/parisc/configs/712_defconfig @@ -1,12 +1,16 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.10-pa5 -# Wed Jan 5 13:20:32 2005 +# Linux kernel version: 2.6.14-rc5-pa1 +# Fri Oct 21 23:04:34 2005 # CONFIG_PARISC=y CONFIG_MMU=y CONFIG_STACK_GROWSUP=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y # # Code maturity level options @@ -15,35 +19,40 @@ CONFIG_EXPERIMENTAL=y # CONFIG_CLEAN_COMPILE is not set CONFIG_BROKEN=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=16 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -65,9 +74,18 @@ CONFIG_PA7100LC=y # CONFIG_PA7300LC is not set # CONFIG_PA8X00 is not set CONFIG_PA11=y -# CONFIG_64BIT is not set # CONFIG_SMP is not set -# CONFIG_DISCONTIGMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set # CONFIG_PREEMPT is not set # CONFIG_HPUX is not set @@ -81,8 +99,6 @@ CONFIG_GSC_LASI=y # CONFIG_GSC_WAX is not set # CONFIG_EISA is not set # CONFIG_PCI is not set -CONFIG_CHASSIS_LCD_LED=y -# CONFIG_PDC_CHASSIS is not set # # PCCARD (PCMCIA/CardBus) support @@ -90,12 +106,15 @@ CONFIG_CHASSIS_LCD_LED=y # CONFIG_PCCARD is not set # -# PC-card bridges +# PCI Hotplug Support # # -# PCI Hotplug Support +# PA-RISC specific drivers # +CONFIG_CHASSIS_LCD_LED=y +# CONFIG_PDC_CHASSIS is not set +CONFIG_PDC_STABLE=y # # Executable file formats @@ -104,137 +123,7 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m # -# Device Drivers -# - -# -# Generic Driver Options -# -# CONFIG_STANDALONE is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=y -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_PC_FIFO is not set -# CONFIG_PARPORT_PC_SUPERIO is not set -CONFIG_PARPORT_GSC=y -# CONFIG_PARPORT_OTHER is not set -# CONFIG_PARPORT_1284 is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_PARIDE is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=y -# CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=6144 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=y - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_PPA is not set -# CONFIG_SCSI_IMM is not set -CONFIG_SCSI_LASI700=y -CONFIG_53C700_MEM_MAPPED=y -CONFIG_53C700_LE_ON_BE=y -# CONFIG_SCSI_ZALON is not set -CONFIG_SCSI_DEBUG=m - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -# CONFIG_MD_RAID10 is not set -# CONFIG_MD_RAID5 is not set -# CONFIG_MD_RAID6 is not set -# CONFIG_MD_MULTIPATH is not set -# CONFIG_MD_FAULTY is not set -# CONFIG_BLK_DEV_DM is not set - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# - -# -# Networking support +# Networking # CONFIG_NET=y @@ -243,12 +132,14 @@ CONFIG_NET=y # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y -CONFIG_NETLINK_DEV=y CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m CONFIG_NET_KEY=m CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y @@ -262,8 +153,10 @@ CONFIG_INET_AH=m CONFIG_INET_ESP=m # CONFIG_INET_IPCOMP is not set CONFIG_INET_TUNNEL=m -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y # # IP: Virtual Server Configuration @@ -272,6 +165,7 @@ CONFIG_IP_TCPDIAG=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_NETLINK is not set # # IP: Netfilter Configuration @@ -279,11 +173,14 @@ CONFIG_NETFILTER=y CONFIG_IP_NF_CONNTRACK=m # CONFIG_IP_NF_CT_ACCT is not set CONFIG_IP_NF_CONNTRACK_MARK=y +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set CONFIG_IP_NF_CT_PROTO_SCTP=m CONFIG_IP_NF_FTP=m CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_LIMIT=m @@ -307,21 +204,23 @@ CONFIG_IP_NF_MATCH_OWNER=m # CONFIG_IP_NF_MATCH_ADDRTYPE is not set # CONFIG_IP_NF_MATCH_REALM is not set CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set CONFIG_IP_NF_MATCH_COMMENT=m CONFIG_IP_NF_MATCH_CONNMARK=m CONFIG_IP_NF_MATCH_HASHLIMIT=m +# CONFIG_IP_NF_MATCH_STRING is not set CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m +# CONFIG_IP_NF_TARGET_NFQUEUE is not set CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_SAME=m -# CONFIG_IP_NF_NAT_LOCAL is not set CONFIG_IP_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_NAT_IRC=m CONFIG_IP_NF_NAT_FTP=m @@ -333,6 +232,7 @@ CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_DSCP=m CONFIG_IP_NF_TARGET_MARK=m CONFIG_IP_NF_TARGET_CLASSIFY=m +# CONFIG_IP_NF_TARGET_TTL is not set CONFIG_IP_NF_TARGET_CONNMARK=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m @@ -340,10 +240,11 @@ CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m -# CONFIG_IP_NF_COMPAT_IPCHAINS is not set -# CONFIG_IP_NF_COMPAT_IPFWADM is not set -CONFIG_XFRM=y -CONFIG_XFRM_USER=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set # # SCTP Configuration (EXPERIMENTAL) @@ -362,10 +263,6 @@ CONFIG_LLC2=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -373,17 +270,162 @@ CONFIG_LLC2=m # Network testing # CONFIG_NET_PKTGEN=m -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +CONFIG_PARPORT=y +CONFIG_PARPORT_PC=m +# CONFIG_PARPORT_PC_FIFO is not set +# CONFIG_PARPORT_PC_SUPERIO is not set +CONFIG_PARPORT_GSC=y +# CONFIG_PARPORT_1284 is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_PARIDE is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=6144 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_ATA_OVER_ETH=m + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_PPA is not set +# CONFIG_SCSI_IMM is not set +CONFIG_SCSI_LASI700=y +CONFIG_53C700_LE_ON_BE=y +# CONFIG_SCSI_ZALON is not set +CONFIG_SCSI_DEBUG=m + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID5 is not set +# CONFIG_MD_RAID6 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set +# CONFIG_BLK_DEV_DM is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# + +# +# Network device support +# CONFIG_NETDEVICES=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_EQUALIZER is not set CONFIG_TUN=m -# CONFIG_ETHERTAP is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) @@ -391,6 +433,7 @@ CONFIG_TUN=m CONFIG_NET_ETHERNET=y CONFIG_MII=m CONFIG_LASI_82596=y +# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) @@ -414,6 +457,7 @@ CONFIG_NET_RADIO=y # # CONFIG_STRIP is not set # CONFIG_ATMEL is not set +# CONFIG_HOSTAP is not set # # Wan interfaces @@ -431,6 +475,8 @@ CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -460,19 +506,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PARKBD is not set -CONFIG_SERIO_GSCPS2=y -CONFIG_HP_SDC=y -CONFIG_HIL_MLC=y -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -483,6 +516,7 @@ CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +CONFIG_KEYBOARD_HIL_OLD=y # CONFIG_KEYBOARD_HIL is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y @@ -494,6 +528,19 @@ CONFIG_MOUSE_HIL=m # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PARKBD is not set +CONFIG_SERIO_GSCPS2=y +CONFIG_HP_SDC=y +CONFIG_HIL_MLC=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -511,7 +558,6 @@ CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set # @@ -546,12 +592,14 @@ CONFIG_GEN_RTC_X=y # # Ftape, the floppy tape device driver # -# CONFIG_AGP is not set -# CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -562,10 +610,20 @@ CONFIG_MAX_RAW_DEVS=256 # CONFIG_W1 is not set # +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# # Misc devices # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -579,28 +637,36 @@ CONFIG_MAX_RAW_DEVS=256 # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y CONFIG_FB_STI=y +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # -CONFIG_STI_CONSOLE=y +CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=128 CONFIG_DUMMY_CONSOLE_ROWS=48 -CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_STI_CONSOLE=y CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set # CONFIG_FONT_PEARL_8x8 is not set # CONFIG_FONT_ACORN_8x8 is not set # CONFIG_FONT_MINI_4x6 is not set # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set # # Logo configuration @@ -610,6 +676,7 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_LOGO_PARISC_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -657,10 +724,6 @@ CONFIG_SND_HARMONY=y # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -671,10 +734,20 @@ CONFIG_SND_HARMONY=y # CONFIG_MMC is not set # +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_JBD=y @@ -682,20 +755,24 @@ CONFIG_JBD=y # CONFIG_REISERFS_FS is not set CONFIG_JFS_FS=m # CONFIG_JFS_POSIX_ACL is not set +# CONFIG_JFS_SECURITY is not set # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m -# CONFIG_XFS_RT is not set +CONFIG_XFS_EXPORT=y # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -722,14 +799,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -CONFIG_TMPFS_XATTR=y -# CONFIG_TMPFS_SECURITY is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -754,16 +828,19 @@ CONFIG_UFS_FS=m # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=m CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y @@ -778,6 +855,7 @@ CONFIG_CIFS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -838,13 +916,19 @@ CONFIG_OPROFILE=m # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_IOREMAP is not set +# CONFIG_DEBUG_FS is not set # # Security options @@ -865,6 +949,7 @@ CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m @@ -882,9 +967,14 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_TEST=m # +# Hardware crypto devices +# + +# # Library routines # CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m diff --git a/arch/parisc/configs/a500_defconfig b/arch/parisc/configs/a500_defconfig index 30fc03ed0cfb..955ef5084f3e 100644 --- a/arch/parisc/configs/a500_defconfig +++ b/arch/parisc/configs/a500_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc4-pa1 -# Wed Feb 16 11:32:49 2005 +# Linux kernel version: 2.6.14-rc5-pa1 +# Fri Oct 21 23:04:54 2005 # CONFIG_PARISC=y CONFIG_MMU=y @@ -10,6 +10,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y # # Code maturity level options @@ -19,26 +20,32 @@ CONFIG_EXPERIMENTAL=y CONFIG_BROKEN=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=16 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -48,6 +55,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -74,7 +82,19 @@ CONFIG_PREFETCH=y CONFIG_64BIT=y CONFIG_SMP=y CONFIG_HOTPLUG_CPU=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set # CONFIG_PREEMPT is not set CONFIG_COMPAT=y CONFIG_NR_CPUS=8 @@ -85,7 +105,7 @@ CONFIG_NR_CPUS=8 # CONFIG_GSC is not set CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set CONFIG_PCI_LBA=y CONFIG_IOSAPIC=y CONFIG_IOMMU_SBA=y @@ -96,6 +116,8 @@ CONFIG_IOMMU_SBA=y CONFIG_PCCARD=m # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=m +# CONFIG_PCMCIA_LOAD_CIS is not set +CONFIG_PCMCIA_IOCTL=y CONFIG_CARDBUS=y # @@ -104,7 +126,6 @@ CONFIG_CARDBUS=y CONFIG_YENTA=m CONFIG_PD6729=m CONFIG_I82092=m -CONFIG_TCIC=m CONFIG_PCCARD_NONSTATIC=m # @@ -127,6 +148,203 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +# CONFIG_INET_IPCOMP is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_INET6_TUNNEL=m +CONFIG_IPV6_TUNNEL=m +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +# CONFIG_IP_NF_CT_ACCT is not set +CONFIG_IP_NF_CONNTRACK_MARK=y +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +# CONFIG_IP_NF_MATCH_REALM is not set +CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_CONNMARK=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +# CONFIG_IP_NF_MATCH_STRING is not set +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +# CONFIG_IP_NF_TARGET_NFQUEUE is not set +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +# CONFIG_IP_NF_TARGET_TTL is not set +CONFIG_IP_NF_TARGET_CONNMARK=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_IP6_NF_QUEUE is not set +CONFIG_IP6_NF_IPTABLES=m +# CONFIG_IP6_NF_MATCH_LIMIT is not set +CONFIG_IP6_NF_MATCH_MAC=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_HL=m +# CONFIG_IP6_NF_MATCH_MULTIPORT is not set +# CONFIG_IP6_NF_MATCH_OWNER is not set +# CONFIG_IP6_NF_MATCH_MARK is not set +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +# CONFIG_IP6_NF_MATCH_AHESP is not set +# CONFIG_IP6_NF_MATCH_LENGTH is not set +# CONFIG_IP6_NF_MATCH_EUI64 is not set +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_TARGET_REJECT=m +# CONFIG_IP6_NF_TARGET_NFQUEUE is not set +CONFIG_IP6_NF_MANGLE=m +# CONFIG_IP6_NF_TARGET_MARK is not set +# CONFIG_IP6_NF_TARGET_HL is not set +CONFIG_IP6_NF_RAW=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +CONFIG_IP_DCCP=m +CONFIG_INET_DCCP_DIAG=m + +# +# DCCP CCIDs Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP_CCID3 is not set + +# +# DCCP Kernel Hacking +# +# CONFIG_IP_DCCP_DEBUG is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=m +CONFIG_LLC2=m +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# # Device Drivers # @@ -139,6 +357,11 @@ CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set @@ -169,7 +392,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=6144 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set # @@ -189,6 +411,7 @@ CONFIG_IOSCHED_CFQ=y # # SCSI device support # +CONFIG_RAID_ATTRS=m CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -201,6 +424,7 @@ CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -215,6 +439,7 @@ CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=m CONFIG_SCSI_ISCSI_ATTRS=m +CONFIG_SCSI_SAS_ATTRS=m # # SCSI low-level drivers @@ -229,14 +454,12 @@ CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_ADVANSYS is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set @@ -246,8 +469,6 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_PCI2000 is not set -# CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_QLOGIC_ISP is not set CONFIG_SCSI_QLOGIC_FC=m # CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set @@ -258,7 +479,9 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA22XX is not set CONFIG_SCSI_QLA2300=m CONFIG_SCSI_QLA2322=m -CONFIG_SCSI_QLA6312=m +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set CONFIG_SCSI_DEBUG=m @@ -288,8 +511,11 @@ CONFIG_MD_RAID1=y # # Fusion MPT device support # -CONFIG_FUSION=m -CONFIG_FUSION_MAX_SGE=40 +CONFIG_FUSION=y +CONFIG_FUSION_SPI=m +CONFIG_FUSION_FC=m +# CONFIG_FUSION_SAS is not set +CONFIG_FUSION_MAX_SGE=128 CONFIG_FUSION_CTL=m # @@ -303,153 +529,13 @@ CONFIG_FUSION_CTL=m # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_NETLINK_DEV=y -CONFIG_UNIX=y -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -# CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set - -# -# IP: Virtual Server Configuration +# Network device support # -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -# CONFIG_IP_NF_MATCH_ADDRTYPE is not set -# CONFIG_IP_NF_MATCH_REALM is not set -CONFIG_IP_NF_MATCH_SCTP=m -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_XFRM=y -CONFIG_XFRM_USER=m - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -CONFIG_LLC=m -CONFIG_LLC2=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -CONFIG_NET_PKTGEN=m -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_EQUALIZER is not set CONFIG_TUN=m -# CONFIG_ETHERTAP is not set # # ARCnet devices @@ -457,12 +543,18 @@ CONFIG_TUN=m # CONFIG_ARCNET is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set CONFIG_NET_VENDOR_3COM=y CONFIG_VORTEX=m CONFIG_TYPHOON=m @@ -479,6 +571,7 @@ CONFIG_TULIP_MMIO=y # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set CONFIG_PCMCIA_XIRCOM=m # CONFIG_PCMCIA_XIRTULIP is not set CONFIG_HP100=m @@ -489,48 +582,43 @@ CONFIG_PCNET32=m # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_DGRS is not set -CONFIG_EEPRO100=m +# CONFIG_EEPRO100 is not set CONFIG_E100=m -CONFIG_E100_NAPI=y # CONFIG_FEALNX is not set -CONFIG_NATSEMI=m +# CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -# CONFIG_8139TOO_8129 is not set -# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_8139TOO is not set # CONFIG_SIS900 is not set -CONFIG_EPIC100=m +# CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set -CONFIG_VIA_RHINE=m -CONFIG_VIA_RHINE_MMIO=y +# CONFIG_VIA_RHINE is not set # # Ethernet (1000 Mbit) # CONFIG_ACENIC=m CONFIG_ACENIC_OMIT_TIGON_I=y -CONFIG_DL2K=m +# CONFIG_DL2K is not set CONFIG_E1000=m CONFIG_E1000_NAPI=y # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=m +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # -CONFIG_IXGB=m -CONFIG_IXGB_NAPI=y -CONFIG_S2IO=m -CONFIG_S2IO_NAPI=y -# CONFIG_2BUFF_MODE is not set +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set # # Token Ring devices @@ -560,6 +648,7 @@ CONFIG_PCMCIA_RAYCS=m CONFIG_HERMES=m CONFIG_PLX_HERMES=m CONFIG_TMD_HERMES=m +# CONFIG_NORTEL_HERMES is not set CONFIG_PCI_HERMES=m # CONFIG_ATMEL is not set @@ -567,6 +656,7 @@ CONFIG_PCI_HERMES=m # Wireless 802.11b Pcmcia/Cardbus cards support # CONFIG_PCMCIA_HERMES=m +# CONFIG_PCMCIA_SPECTRUM is not set CONFIG_AIRO_CS=m CONFIG_PCMCIA_WL3501=m @@ -574,6 +664,7 @@ CONFIG_PCMCIA_WL3501=m # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support # # CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set CONFIG_NET_WIRELESS=y # @@ -607,6 +698,8 @@ CONFIG_PPP_BSDCOMP=m # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -633,13 +726,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -649,6 +735,12 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -667,7 +759,6 @@ CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set # @@ -677,6 +768,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_PDC_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set @@ -708,6 +800,11 @@ CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 # +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# # I2C support # # CONFIG_I2C is not set @@ -718,10 +815,20 @@ CONFIG_MAX_RAW_DEVS=256 # CONFIG_W1 is not set # +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# # Misc devices # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -742,6 +849,7 @@ CONFIG_MAX_RAW_DEVS=256 CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=160 CONFIG_DUMMY_CONSOLE_ROWS=64 +# CONFIG_STI_CONSOLE is not set # # Sound @@ -751,13 +859,9 @@ CONFIG_DUMMY_CONSOLE_ROWS=64 # # USB support # -# CONFIG_USB is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# +# CONFIG_USB is not set # # USB Gadget Support @@ -772,17 +876,18 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # InfiniBand support # -CONFIG_INFINIBAND=m -CONFIG_INFINIBAND_MTHCA=m -# CONFIG_INFINIBAND_MTHCA_DEBUG is not set -CONFIG_INFINIBAND_IPOIB=m -# CONFIG_INFINIBAND_IPOIB_DEBUG is not set +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_JBD=y @@ -794,22 +899,20 @@ CONFIG_JFS_FS=m # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# CONFIG_XFS_FS=m CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -836,13 +939,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -867,15 +968,18 @@ CONFIG_UFS_FS=m # CONFIG_NFS_FS=m CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=m CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_RPCSEC_GSS_KRB5=m @@ -890,6 +994,7 @@ CONFIG_CIFS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -906,15 +1011,15 @@ CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m +# CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set -CONFIG_NLS_CODEPAGE_863=m +# CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set -CONFIG_NLS_CODEPAGE_865=m +# CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set @@ -926,10 +1031,10 @@ CONFIG_NLS_CODEPAGE_865=m # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set @@ -950,11 +1055,15 @@ CONFIG_OPROFILE=m # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_IOREMAP is not set @@ -974,25 +1083,26 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_CRYPTO=y CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_TEST=m @@ -1004,6 +1114,7 @@ CONFIG_CRYPTO_TEST=m # Library routines # CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m diff --git a/arch/parisc/configs/b180_defconfig b/arch/parisc/configs/b180_defconfig index 46c9511f3229..8819e7e6ae3f 100644 --- a/arch/parisc/configs/b180_defconfig +++ b/arch/parisc/configs/b180_defconfig @@ -1,12 +1,15 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.10-pa5 -# Wed Jan 5 13:35:54 2005 +# Linux kernel version: 2.6.14-rc5-pa1 +# Fri Oct 21 23:06:10 2005 # CONFIG_PARISC=y CONFIG_MMU=y CONFIG_STACK_GROWSUP=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y # # Code maturity level options @@ -14,33 +17,39 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_EXPERIMENTAL is not set CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=16 # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -60,8 +69,14 @@ CONFIG_PA7100LC=y # CONFIG_PA7300LC is not set # CONFIG_PA8X00 is not set CONFIG_PA11=y -# CONFIG_64BIT is not set # CONFIG_SMP is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set # CONFIG_PREEMPT is not set # CONFIG_HPUX is not set @@ -78,11 +93,25 @@ CONFIG_EISA_NAMES=y CONFIG_ISA=y CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set CONFIG_GSC_DINO=y # CONFIG_PCI_LBA is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# + +# +# PA-RISC specific drivers +# CONFIG_CHASSIS_LCD_LED=y # CONFIG_PDC_CHASSIS is not set +CONFIG_PDC_STABLE=y # # Executable file formats @@ -91,6 +120,64 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_NETFILTER is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# # Device Drivers # @@ -99,9 +186,15 @@ CONFIG_BINFMT_ELF=y # CONFIG_STANDALONE=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set @@ -111,10 +204,8 @@ CONFIG_STANDALONE=y # CONFIG_PARPORT=y CONFIG_PARPORT_PC=y -CONFIG_PARPORT_PC_CML1=y # CONFIG_PARPORT_SERIAL is not set CONFIG_PARPORT_GSC=y -# CONFIG_PARPORT_OTHER is not set # CONFIG_PARPORT_1284 is not set # @@ -125,19 +216,17 @@ CONFIG_PARPORT_GSC=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_INITRAMFS_SOURCE="" CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -149,6 +238,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +CONFIG_ATA_OVER_ETH=y # # ATA/ATAPI/MFM/RLL support @@ -158,6 +248,7 @@ CONFIG_IOSCHED_CFQ=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -170,6 +261,7 @@ CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -183,16 +275,16 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set -# CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -202,14 +294,11 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_IN2000 is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_IPS is not set @@ -219,7 +308,6 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_NCR53C406A is not set CONFIG_SCSI_LASI700=y -CONFIG_53C700_MEM_MAPPED=y CONFIG_53C700_LE_ON_BE=y CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 @@ -231,7 +319,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -240,12 +327,12 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA6322 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set -# CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set @@ -263,6 +350,7 @@ CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID5=y +CONFIG_MD_RAID6=y # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set @@ -271,6 +359,9 @@ CONFIG_MD_RAID5=y # Fusion MPT device support # # CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -283,58 +374,8 @@ CONFIG_MD_RAID5=y # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_NETLINK_DEV=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_NETFILTER is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -347,6 +388,11 @@ CONFIG_NETDEVICES=y # CONFIG_ARCNET is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y @@ -354,8 +400,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_LASI_82596 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set -# CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set @@ -369,6 +415,7 @@ CONFIG_TULIP=y # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set @@ -384,12 +431,15 @@ CONFIG_TULIP=y # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -413,12 +463,12 @@ CONFIG_NET_RADIO=y # # Wireless 802.11b ISA/PCI cards support # -# CONFIG_AIRO is not set # CONFIG_HERMES is not set # # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support # +# CONFIG_HOSTAP is not set CONFIG_NET_WIRELESS=y # @@ -435,6 +485,8 @@ CONFIG_PPP=y # CONFIG_PPP_BSDCOMP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -464,23 +516,12 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_PARKBD is not set -CONFIG_SERIO_GSCPS2=y -# CONFIG_HP_SDC is not set -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_ATKBD=y +CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y +# CONFIG_KEYBOARD_ATKBD_RDI_KEYCODES is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set @@ -488,7 +529,7 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_HIL_OLD is not set # CONFIG_KEYBOARD_HIL is not set CONFIG_INPUT_MOUSE=y -# CONFIG_MOUSE_PS2 is not set +CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set @@ -502,6 +543,19 @@ CONFIG_INPUT_MISC=y # CONFIG_HP_SDC_RTC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PARKBD is not set +CONFIG_SERIO_GSCPS2=y +# CONFIG_HP_SDC is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -519,8 +573,11 @@ CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set +# CONFIG_SERIAL_8250_FOURPORT is not set +# CONFIG_SERIAL_8250_ACCENT is not set +# CONFIG_SERIAL_8250_BOCA is not set +# CONFIG_SERIAL_8250_HUB6 is not set # # Non-8250 serial port support @@ -529,6 +586,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_PDC_CONSOLE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -555,11 +613,14 @@ CONFIG_GEN_RTC=y # # Ftape, the floppy tape device driver # -# CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # +# TPM devices +# + +# # I2C support # # CONFIG_I2C is not set @@ -570,10 +631,20 @@ CONFIG_GEN_RTC=y # CONFIG_W1 is not set # +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# # Misc devices # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -587,6 +658,11 @@ CONFIG_GEN_RTC=y # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_CIRRUS is not set @@ -595,6 +671,7 @@ CONFIG_FB=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set CONFIG_FB_STI=y +# CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON_OLD is not set @@ -606,18 +683,19 @@ CONFIG_FB_STI=y # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # -# CONFIG_MDA_CONSOLE is not set -CONFIG_STI_CONSOLE=y +CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=160 CONFIG_DUMMY_CONSOLE_ROWS=64 -CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_STI_CONSOLE=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -630,6 +708,7 @@ CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_LOGO_PARISC_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -639,13 +718,9 @@ CONFIG_LOGO_PARISC_CLUT224=y # # USB support # -# CONFIG_USB is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# +# CONFIG_USB is not set # # USB Gadget Support @@ -658,23 +733,36 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -697,11 +785,10 @@ CONFIG_JOLIET=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -719,15 +806,19 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SMB_FS is not set +CONFIG_SMB_FS=y +# CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -785,13 +876,19 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_IOREMAP is not set +# CONFIG_DEBUG_FS is not set # # Security options @@ -815,6 +912,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set @@ -832,8 +930,13 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_TEST is not set # +# Hardware crypto devices +# + +# # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig index 67aca6ccc9b0..9d86b6b1ebd1 100644 --- a/arch/parisc/configs/c3000_defconfig +++ b/arch/parisc/configs/c3000_defconfig @@ -1,12 +1,16 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.10-pa5 -# Wed Jan 5 13:26:49 2005 +# Linux kernel version: 2.6.14-rc5-pa1 +# Fri Oct 21 23:06:31 2005 # CONFIG_PARISC=y CONFIG_MMU=y CONFIG_STACK_GROWSUP=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y # # Code maturity level options @@ -15,26 +19,31 @@ CONFIG_EXPERIMENTAL=y # CONFIG_CLEAN_COMPILE is not set CONFIG_BROKEN=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=16 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_INITRAMFS_SOURCE="" CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -44,6 +53,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -66,10 +76,19 @@ CONFIG_KMOD=y CONFIG_PA8X00=y CONFIG_PA20=y CONFIG_PREFETCH=y -# CONFIG_PARISC64 is not set # CONFIG_64BIT is not set # CONFIG_SMP is not set -# CONFIG_DISCONTIGMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set # CONFIG_PREEMPT is not set # CONFIG_HPUX is not set @@ -79,13 +98,10 @@ CONFIG_PREFETCH=y # CONFIG_GSC is not set CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set CONFIG_PCI_LBA=y CONFIG_IOSAPIC=y CONFIG_IOMMU_SBA=y -CONFIG_SUPERIO=y -CONFIG_CHASSIS_LCD_LED=y -# CONFIG_PDC_CHASSIS is not set # # PCCARD (PCMCIA/CardBus) support @@ -93,13 +109,17 @@ CONFIG_CHASSIS_LCD_LED=y # CONFIG_PCCARD is not set # -# PC-card bridges +# PCI Hotplug Support # +# CONFIG_HOTPLUG_PCI is not set # -# PCI Hotplug Support +# PA-RISC specific drivers # -# CONFIG_HOTPLUG_PCI is not set +CONFIG_SUPERIO=y +CONFIG_CHASSIS_LCD_LED=y +# CONFIG_PDC_CHASSIS is not set +CONFIG_PDC_STABLE=y # # Executable file formats @@ -108,6 +128,186 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +CONFIG_INET6_IPCOMP=m +CONFIG_INET6_TUNNEL=m +CONFIG_IPV6_TUNNEL=m +CONFIG_NETFILTER=y +CONFIG_NETFILTER_DEBUG=y +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +# CONFIG_IP_NF_CT_ACCT is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +# CONFIG_IP_NF_CT_PROTO_SCTP is not set +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +# CONFIG_IP_NF_MATCH_REALM is not set +# CONFIG_IP_NF_MATCH_SCTP is not set +# CONFIG_IP_NF_MATCH_DCCP is not set +# CONFIG_IP_NF_MATCH_COMMENT is not set +# CONFIG_IP_NF_MATCH_HASHLIMIT is not set +# CONFIG_IP_NF_MATCH_STRING is not set +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +# CONFIG_IP_NF_TARGET_NFQUEUE is not set +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_RAW is not set +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_IP6_NF_QUEUE is not set +CONFIG_IP6_NF_IPTABLES=m +# CONFIG_IP6_NF_MATCH_LIMIT is not set +CONFIG_IP6_NF_MATCH_MAC=m +CONFIG_IP6_NF_MATCH_RT=m +# CONFIG_IP6_NF_MATCH_OPTS is not set +# CONFIG_IP6_NF_MATCH_FRAG is not set +# CONFIG_IP6_NF_MATCH_HL is not set +# CONFIG_IP6_NF_MATCH_MULTIPORT is not set +CONFIG_IP6_NF_MATCH_OWNER=m +# CONFIG_IP6_NF_MATCH_MARK is not set +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +# CONFIG_IP6_NF_MATCH_AHESP is not set +CONFIG_IP6_NF_MATCH_LENGTH=m +# CONFIG_IP6_NF_MATCH_EUI64 is not set +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_TARGET_REJECT=m +# CONFIG_IP6_NF_TARGET_NFQUEUE is not set +CONFIG_IP6_NF_MANGLE=m +# CONFIG_IP6_NF_TARGET_MARK is not set +# CONFIG_IP6_NF_TARGET_HL is not set +# CONFIG_IP6_NF_RAW is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# # Device Drivers # @@ -120,6 +320,11 @@ CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set @@ -141,14 +346,14 @@ CONFIG_FW_LOADER=y # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set CONFIG_BLK_DEV_UMEM=m +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_CRYPTOLOOP=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set # @@ -158,6 +363,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -201,6 +407,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set CONFIG_BLK_DEV_NS87415=y # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set @@ -218,6 +425,7 @@ CONFIG_BLK_DEV_IDEDMA=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -230,6 +438,7 @@ CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -242,7 +451,9 @@ CONFIG_SCSI_MULTI_LUN=y # SCSI Transport Attributes # CONFIG_SCSI_SPI_ATTRS=y -CONFIG_SCSI_FC_ATTRS=m +# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers @@ -258,25 +469,26 @@ CONFIG_SCSI_FC_ATTRS=m # CONFIG_SCSI_ADVANSYS is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set CONFIG_SCSI_SATA=y # CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set CONFIG_SCSI_ATA_PIIX=m +# CONFIG_SCSI_SATA_MV is not set # CONFIG_SCSI_SATA_NV is not set CONFIG_SCSI_SATA_PROMISE=m +# CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_SX4 is not set CONFIG_SCSI_SATA_SIL=m # CONFIG_SCSI_SATA_SIS is not set # CONFIG_SCSI_SATA_ULI is not set CONFIG_SCSI_SATA_VIA=m # CONFIG_SCSI_SATA_VITESSE is not set -# CONFIG_SCSI_BUSLOGIC is not set +CONFIG_SCSI_SATA_INTEL_COMBINED=y # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set @@ -286,20 +498,17 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_PCI2000 is not set -# CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_QLOGIC_ISP is not set -CONFIG_SCSI_QLOGIC_FC=m -# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set -CONFIG_SCSI_QLOGIC_1280=m -# CONFIG_SCSI_QLOGIC_1280_1040 is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA21XX is not set # CONFIG_SCSI_QLA22XX is not set -CONFIG_SCSI_QLA2300=m -CONFIG_SCSI_QLA2322=m -CONFIG_SCSI_QLA6312=m -CONFIG_SCSI_QLA6322=m +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set @@ -316,19 +525,24 @@ CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set # CONFIG_MD_RAID5 is not set # CONFIG_MD_RAID6 is not set -CONFIG_MD_MULTIPATH=y +# CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set -CONFIG_BLK_DEV_DM=y -# CONFIG_DM_CRYPT is not set -# CONFIG_DM_SNAPSHOT is not set -# CONFIG_DM_MIRROR is not set -# CONFIG_DM_ZERO is not set +CONFIG_BLK_DEV_DM=m +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +# CONFIG_DM_MULTIPATH_EMC is not set # # Fusion MPT device support # -CONFIG_FUSION=m -CONFIG_FUSION_MAX_SGE=40 +CONFIG_FUSION=y +CONFIG_FUSION_SPI=m +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set +CONFIG_FUSION_MAX_SGE=128 CONFIG_FUSION_CTL=m # @@ -342,151 +556,13 @@ CONFIG_FUSION_CTL=m # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_NETLINK_DEV=y -CONFIG_UNIX=y -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -CONFIG_NETFILTER_DEBUG=y - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -# CONFIG_IP_NF_CONNTRACK_MARK is not set -# CONFIG_IP_NF_CT_PROTO_SCTP is not set -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -# CONFIG_IP_NF_MATCH_ADDRTYPE is not set -# CONFIG_IP_NF_MATCH_REALM is not set -# CONFIG_IP_NF_MATCH_SCTP is not set -# CONFIG_IP_NF_MATCH_COMMENT is not set -# CONFIG_IP_NF_MATCH_HASHLIMIT is not set -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -# CONFIG_IP_NF_RAW is not set -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_COMPAT_IPFWADM=m -CONFIG_XFRM=y -CONFIG_XFRM_USER=m - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -CONFIG_LLC=m -CONFIG_LLC2=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_EQUALIZER is not set CONFIG_TUN=m -# CONFIG_ETHERTAP is not set # # ARCnet devices @@ -494,12 +570,18 @@ CONFIG_TUN=m # CONFIG_ARCNET is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=m -CONFIG_HAPPYMEAL=m +# CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -514,28 +596,22 @@ CONFIG_TULIP_MMIO=y # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y -CONFIG_PCNET32=m +# CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set -CONFIG_ADAPTEC_STARFIRE=m -# CONFIG_ADAPTEC_STARFIRE_NAPI is not set -CONFIG_B44=m +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_DGRS is not set -CONFIG_EEPRO100=m -# CONFIG_EEPRO100_PIO is not set +# CONFIG_EEPRO100 is not set CONFIG_E100=m -# CONFIG_E100_NAPI is not set # CONFIG_FEALNX is not set -CONFIG_NATSEMI=m +# CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -# CONFIG_8139TOO_8129 is not set -# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_8139TOO is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -554,15 +630,18 @@ CONFIG_E1000=m # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=m +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # -CONFIG_IXGB=y -CONFIG_IXGB_NAPI=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set # CONFIG_S2IO is not set # @@ -593,6 +672,8 @@ CONFIG_PPPOE=m # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -622,16 +703,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=m -CONFIG_SERIO_SERPORT=m -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -649,6 +720,16 @@ CONFIG_INPUT_MOUSE=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=m +CONFIG_SERIO_SERPORT=m +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=m +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -666,7 +747,6 @@ CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set # @@ -676,6 +756,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_PDC_CONSOLE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -698,12 +779,16 @@ CONFIG_GEN_RTC_X=y # # Ftape, the floppy tape device driver # -# CONFIG_AGP is not set # CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 # +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# # I2C support # # CONFIG_I2C is not set @@ -714,10 +799,20 @@ CONFIG_MAX_RAW_DEVS=256 # CONFIG_W1 is not set # +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# # Misc devices # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -731,6 +826,11 @@ CONFIG_MAX_RAW_DEVS=256 # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_CIRRUS is not set @@ -739,6 +839,7 @@ CONFIG_FB=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set CONFIG_FB_STI=y +# CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON_OLD is not set @@ -751,18 +852,20 @@ CONFIG_FB_STI=y # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # -CONFIG_STI_CONSOLE=y +CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=160 CONFIG_DUMMY_CONSOLE_ROWS=64 -CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_STI_CONSOLE=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -775,6 +878,7 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_LOGO_PARISC_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -784,7 +888,78 @@ CONFIG_SOUND=y # # Advanced Linux Sound Architecture # -# CONFIG_SND is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_SEQUENCER=y +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_AC97_CODEC=y +CONFIG_SND_AC97_BUS=y + +# +# PCI devices +# +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_YMFPCI is not set +CONFIG_SND_AD1889=y +# CONFIG_SND_AD1889_OPL3 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set # # Open Sound System @@ -794,6 +969,8 @@ CONFIG_SOUND=y # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y CONFIG_USB_DEBUG=y @@ -804,23 +981,23 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers # # CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # # USB Device Class drivers # -# CONFIG_USB_AUDIO is not set +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set # CONFIG_USB_BLUETOOTH_TTY is not set -# CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=m @@ -829,12 +1006,11 @@ CONFIG_USB_PRINTER=m # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_RW_DETECT is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_HP8200e=y +CONFIG_USB_STORAGE_USBAT=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y @@ -846,21 +1022,25 @@ CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y -CONFIG_USB_AIPTEK=m -CONFIG_USB_WACOM=m -CONFIG_USB_KBTAB=m +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices # CONFIG_USB_MDC800=m CONFIG_USB_MICROTEK=m -CONFIG_USB_HPUSBSCSI=m # # USB Multimedia devices @@ -879,6 +1059,7 @@ CONFIG_USB_HPUSBSCSI=m # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +# CONFIG_USB_MON is not set # # USB port drivers @@ -894,7 +1075,6 @@ CONFIG_USB_HPUSBSCSI=m # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set -# CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set CONFIG_USB_LEGOTOWER=m @@ -903,10 +1083,12 @@ CONFIG_USB_LEGOTOWER=m # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set # -# USB ATM/DSL drivers +# USB DSL modem support # # @@ -920,27 +1102,41 @@ CONFIG_USB_LEGOTOWER=m # CONFIG_MMC is not set # +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set CONFIG_XFS_FS=m -# CONFIG_XFS_RT is not set +CONFIG_XFS_EXPORT=y # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -966,13 +1162,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -996,16 +1190,19 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set # CONFIG_NFSD_TCP is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -1014,6 +1211,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -1074,13 +1272,19 @@ CONFIG_OPROFILE=m # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_IOREMAP is not set +# CONFIG_DEBUG_FS is not set # # Security options @@ -1092,21 +1296,22 @@ CONFIG_MAGIC_SYSRQ=y # Cryptographic options # CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_HMAC is not set CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m +# CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set @@ -1117,9 +1322,14 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_TEST=m # +# Hardware crypto devices +# + +# # Library routines # CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m diff --git a/arch/parisc/defconfig b/arch/parisc/defconfig index fdae21c503d7..f38a4620d24f 100644 --- a/arch/parisc/defconfig +++ b/arch/parisc/defconfig @@ -1,38 +1,56 @@ # # Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc5-pa1 +# Fri Oct 21 23:01:33 2005 # CONFIG_PARISC=y CONFIG_MMU=y CONFIG_STACK_GROWSUP=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y -CONFIG_STANDALONE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=15 +# CONFIG_AUDIT is not set # CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -45,10 +63,21 @@ CONFIG_IOSCHED_DEADLINE=y CONFIG_PA7000=y # CONFIG_PA7100LC is not set # CONFIG_PA7200 is not set +# CONFIG_PA7300LC is not set # CONFIG_PA8X00 is not set CONFIG_PA11=y -# CONFIG_64BIT is not set # CONFIG_SMP is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set # CONFIG_PREEMPT is not set # CONFIG_HPUX is not set @@ -65,14 +94,29 @@ CONFIG_EISA_NAMES=y # CONFIG_ISA is not set CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set CONFIG_GSC_DINO=y CONFIG_PCI_LBA=y CONFIG_IOSAPIC=y CONFIG_IOMMU_SBA=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# PA-RISC specific drivers +# CONFIG_SUPERIO=y CONFIG_CHASSIS_LCD_LED=y CONFIG_PDC_CHASSIS=y +CONFIG_PDC_STABLE=y # # Executable file formats @@ -81,15 +125,97 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# # Device Drivers # # # Generic Driver Options # +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set @@ -99,12 +225,10 @@ CONFIG_BINFMT_ELF=y # CONFIG_PARPORT=y CONFIG_PARPORT_PC=y -CONFIG_PARPORT_PC_CML1=y # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set CONFIG_PARPORT_GSC=y -# CONFIG_PARPORT_OTHER is not set # CONFIG_PARPORT_1284 is not set # @@ -114,18 +238,31 @@ CONFIG_PARPORT_GSC=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -135,6 +272,7 @@ CONFIG_BLK_DEV_INITRD=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -147,53 +285,59 @@ CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_REPORT_LUNS is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_MEGARAID is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set CONFIG_SCSI_LASI700=y -CONFIG_53C700_MEM_MAPPED=y CONFIG_53C700_LE_ON_BE=y CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set +# CONFIG_SCSI_IPR is not set CONFIG_SCSI_ZALON=y CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8 CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 CONFIG_SCSI_NCR53C8XX_SYNC=20 # CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -202,7 +346,8 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA6322 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -217,15 +362,20 @@ CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y +# CONFIG_MD_RAID10 is not set CONFIG_MD_RAID5=y # CONFIG_MD_RAID6 is not set # CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set # # Fusion MPT device support # # CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -238,80 +388,23 @@ CONFIG_MD_RAID5=y # CONFIG_I2O is not set # -# Macintosh device drivers -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_NETLINK_DEV=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_IPV6 is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -CONFIG_IPV6_SCTP__=y -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set # # ARCnet devices # # CONFIG_ARCNET is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) @@ -321,6 +414,7 @@ CONFIG_NET_ETHERNET=y CONFIG_LASI_82596=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set @@ -336,6 +430,7 @@ CONFIG_TULIP=y # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y @@ -361,30 +456,37 @@ CONFIG_NET_PCI=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set +# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # -# CONFIG_ACENIC is not set -CONFIG_DL2K=y +CONFIG_ACENIC=y +# CONFIG_ACENIC_OMIT_TIGON_I is not set +# CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_TIGON3=y +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PLIP is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set # # Wireless LAN (non-hamradio) @@ -399,38 +501,30 @@ CONFIG_NET_RADIO=y # # Wireless 802.11b ISA/PCI cards support # -CONFIG_AIRO=y # CONFIG_HERMES is not set # CONFIG_ATMEL is not set -CONFIG_NET_WIRELESS=y # -# Token Ring devices +# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support # -# CONFIG_TR is not set -# CONFIG_NET_FC is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set +CONFIG_NET_WIRELESS=y # # Wan interfaces # # CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# Bluetooth support -# -# CONFIG_BT is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PLIP is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -460,51 +554,67 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_PARKBD is not set -CONFIG_SERIO_GSCPS2=y -CONFIG_HP_SDC=y -CONFIG_HIL_MLC=y -# CONFIG_SERIO_PCIPS2 is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_ATKBD is not set # CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +CONFIG_KEYBOARD_HIL_OLD=y CONFIG_KEYBOARD_HIL=y CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set # CONFIG_MOUSE_HIL is not set CONFIG_INPUT_JOYSTICK=y +# CONFIG_JOYSTICK_ANALOG is not set +# CONFIG_JOYSTICK_A3D is not set +# CONFIG_JOYSTICK_ADI is not set +# CONFIG_JOYSTICK_COBRA is not set +# CONFIG_JOYSTICK_GF2K is not set +# CONFIG_JOYSTICK_GRIP is not set +# CONFIG_JOYSTICK_GRIP_MP is not set +# CONFIG_JOYSTICK_GUILLEMOT is not set +# CONFIG_JOYSTICK_INTERACT is not set +# CONFIG_JOYSTICK_SIDEWINDER is not set +# CONFIG_JOYSTICK_TMDC is not set # CONFIG_JOYSTICK_IFORCE is not set # CONFIG_JOYSTICK_WARRIOR is not set # CONFIG_JOYSTICK_MAGELLAN is not set # CONFIG_JOYSTICK_SPACEORB is not set # CONFIG_JOYSTICK_SPACEBALL is not set # CONFIG_JOYSTICK_STINGER is not set -# CONFIG_JOYSTICK_TWIDDLER is not set +# CONFIG_JOYSTICK_TWIDJOY is not set # CONFIG_JOYSTICK_DB9 is not set # CONFIG_JOYSTICK_GAMECON is not set # CONFIG_JOYSTICK_TURBOGRAFX is not set -# CONFIG_INPUT_JOYDUMP is not set +# CONFIG_JOYSTICK_JOYDUMP is not set CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set CONFIG_INPUT_MISC=y -# CONFIG_INPUT_PCSPKR is not set # CONFIG_INPUT_UINPUT is not set CONFIG_HP_SDC_RTC=y # +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PARKBD is not set +CONFIG_SERIO_GSCPS2=y +CONFIG_HP_SDC=y +CONFIG_HIL_MLC=y +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -522,16 +632,16 @@ CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set # # Non-8250 serial port support # -# CONFIG_SERIAL_MUX is not set -# CONFIG_PDC_CONSOLE is not set +CONFIG_SERIAL_MUX=y +CONFIG_SERIAL_MUX_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -541,12 +651,6 @@ CONFIG_PRINTER=y # CONFIG_TIPAR is not set # -# Mice -# -# CONFIG_BUSMOUSE is not set -# CONFIG_QIC02_TAPE is not set - -# # IPMI # # CONFIG_IPMI_HANDLER is not set @@ -555,7 +659,6 @@ CONFIG_PRINTER=y # Watchdog Cards # # CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set @@ -565,21 +668,40 @@ CONFIG_GEN_RTC=y # # Ftape, the floppy tape device driver # -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# # I2C support # # CONFIG_I2C is not set # +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# # Misc devices # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -593,34 +715,45 @@ CONFIG_GEN_RTC=y # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set CONFIG_FB_STI=y +# CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON_OLD is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set +# CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # -# CONFIG_MDA_CONSOLE is not set -CONFIG_STI_CONSOLE=y +CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=160 CONFIG_DUMMY_CONSOLE_ROWS=64 -CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_PCI_CONSOLE=y +CONFIG_STI_CONSOLE=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -629,6 +762,7 @@ CONFIG_FONT_8x16=y # Logo configuration # # CONFIG_LOGO is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -638,17 +772,94 @@ CONFIG_SOUND=y # # Advanced Linux Sound Architecture # -# CONFIG_SND is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_SEQUENCER=y +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_AC97_CODEC=y +CONFIG_SND_AC97_BUS=y + +# +# PCI devices +# +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_YMFPCI is not set +CONFIG_SND_AD1889=y +# CONFIG_SND_AD1889_OPL3 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set + +# +# GSC devices +# +CONFIG_SND_HARMONY=y # # Open Sound System # # CONFIG_SOUND_PRIME is not set -# CONFIG_SOUND_HARMONY is not set # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y CONFIG_USB_DEBUG=y @@ -658,26 +869,36 @@ CONFIG_USB_DEBUG=y # CONFIG_USB_DEVICEFS is not set # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set # # USB Device Class drivers # -# CONFIG_USB_AUDIO is not set +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set # CONFIG_USB_BLUETOOTH_TTY is not set -# CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# # CONFIG_USB_STORAGE is not set # -# USB Human Interface Devices (HID) +# USB Input Devices # # CONFIG_USB_HID is not set @@ -688,16 +909,23 @@ CONFIG_USB_OHCI_HCD=y # CONFIG_USB_MOUSE is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set # # USB Multimedia devices @@ -709,13 +937,15 @@ CONFIG_USB_OHCI_HCD=y # # -# USB Network adaptors +# USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +# CONFIG_USB_ZD1201 is not set +CONFIG_USB_MON=y # # USB port drivers @@ -732,12 +962,21 @@ CONFIG_USB_OHCI_HCD=y # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set -# CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set + +# +# USB DSL modem support +# # # USB Gadget Support @@ -745,22 +984,41 @@ CONFIG_USB_OHCI_HCD=y # CONFIG_USB_GADGET is not set # +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -773,7 +1031,8 @@ CONFIG_JOLIET=y # # DOS/FAT/NT Filesystems # -# CONFIG_FAT_FS is not set +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set # CONFIG_NTFS_FS is not set # @@ -781,11 +1040,11 @@ CONFIG_JOLIET=y # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set +CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -809,23 +1068,28 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_GSS is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -861,6 +1125,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set # CONFIG_NLS_ISO8859_1 is not set # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set @@ -885,17 +1150,24 @@ CONFIG_OPROFILE=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SLAB is not set CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=15 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_RWLOCK is not set -CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_IOREMAP is not set +# CONFIG_DEBUG_FS is not set # # Security options # +# CONFIG_KEYS is not set # CONFIG_SECURITY is not set # @@ -909,6 +1181,8 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set @@ -916,11 +1190,23 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_AES is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_TEST is not set # +# Hardware crypto devices +# + +# # Library routines # +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c index f46a07a79218..a065349aee37 100644 --- a/arch/parisc/kernel/cache.c +++ b/arch/parisc/kernel/cache.c @@ -27,6 +27,7 @@ #include <asm/page.h> #include <asm/pgalloc.h> #include <asm/processor.h> +#include <asm/sections.h> int split_tlb; int dcache_stride; @@ -207,6 +208,9 @@ parisc_cache_init(void) /* "New and Improved" version from Jim Hull * (1 << (cc_block-1)) * (cc_line << (4 + cnf.cc_shift)) + * The following CAFL_STRIDE is an optimized version, see + * http://lists.parisc-linux.org/pipermail/parisc-linux/2004-June/023625.html + * http://lists.parisc-linux.org/pipermail/parisc-linux/2004-June/023671.html */ #define CAFL_STRIDE(cnf) (cnf.cc_line << (3 + cnf.cc_block + cnf.cc_shift)) dcache_stride = CAFL_STRIDE(cache_info.dc_conf); @@ -266,7 +270,6 @@ void flush_dcache_page(struct page *page) unsigned long offset; unsigned long addr; pgoff_t pgoff; - pte_t *pte; unsigned long pfn = page_to_pfn(page); @@ -297,21 +300,16 @@ void flush_dcache_page(struct page *page) * taking a page fault if the pte doesn't exist. * This is just for speed. If the page translation * isn't there, there's no point exciting the - * nadtlb handler into a nullification frenzy */ - - - if(!(pte = translation_exists(mpnt, addr))) - continue; - - /* make sure we really have this page: the private + * nadtlb handler into a nullification frenzy. + * + * Make sure we really have this page: the private * mappings may cover this area but have COW'd this - * particular page */ - if(pte_pfn(*pte) != pfn) - continue; - - __flush_cache_page(mpnt, addr); - - break; + * particular page. + */ + if (translation_exists(mpnt, addr, pfn)) { + __flush_cache_page(mpnt, addr); + break; + } } flush_dcache_mmap_unlock(mapping); } @@ -339,17 +337,15 @@ int parisc_cache_flush_threshold = FLUSH_THRESHOLD; void parisc_setup_cache_timing(void) { unsigned long rangetime, alltime; - extern char _text; /* start of kernel code, defined by linker */ - extern char _end; /* end of BSS, defined by linker */ unsigned long size; alltime = mfctl(16); flush_data_cache(); alltime = mfctl(16) - alltime; - size = (unsigned long)(&_end - _text); + size = (unsigned long)(_end - _text); rangetime = mfctl(16); - flush_kernel_dcache_range((unsigned long)&_text, size); + flush_kernel_dcache_range((unsigned long)_text, size); rangetime = mfctl(16) - rangetime; printk(KERN_DEBUG "Whole cache flush %lu cycles, flushing %lu bytes %lu cycles\n", diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c index d34bbe7ae0e3..988844a169e6 100644 --- a/arch/parisc/kernel/drivers.c +++ b/arch/parisc/kernel/drivers.c @@ -46,36 +46,51 @@ static struct device root = { .bus_id = "parisc", }; -#define for_each_padev(padev) \ - for (padev = next_dev(&root); padev != NULL; \ - padev = next_dev(&padev->dev)) +static inline int check_dev(struct device *dev) +{ + if (dev->bus == &parisc_bus_type) { + struct parisc_device *pdev; + pdev = to_parisc_device(dev); + return pdev->id.hw_type != HPHW_FAULTY; + } + return 1; +} + +static struct device * +parse_tree_node(struct device *parent, int index, struct hardware_path *modpath); -#define check_dev(padev) \ - (padev->id.hw_type != HPHW_FAULTY) ? padev : next_dev(&padev->dev) +struct recurse_struct { + void * obj; + int (*fn)(struct device *, void *); +}; + +static int descend_children(struct device * dev, void * data) +{ + struct recurse_struct * recurse_data = (struct recurse_struct *)data; + + if (recurse_data->fn(dev, recurse_data->obj)) + return 1; + else + return device_for_each_child(dev, recurse_data, descend_children); +} /** - * next_dev - enumerates registered devices - * @dev: the previous device returned from next_dev + * for_each_padev - Iterate over all devices in the tree + * @fn: Function to call for each device. + * @data: Data to pass to the called function. * - * next_dev does a depth-first search of the tree, returning parents - * before children. Returns NULL when there are no more devices. + * This performs a depth-first traversal of the tree, calling the + * function passed for each node. It calls the function for parents + * before children. */ -static struct parisc_device *next_dev(struct device *dev) -{ - if (!list_empty(&dev->children)) { - dev = list_to_dev(dev->children.next); - return check_dev(to_parisc_device(dev)); - } - while (dev != &root) { - if (dev->node.next != &dev->parent->children) { - dev = list_to_dev(dev->node.next); - return to_parisc_device(dev); - } - dev = dev->parent; - } - - return NULL; +static int for_each_padev(int (*fn)(struct device *, void *), void * data) +{ + struct recurse_struct recurse_data = { + .obj = data, + .fn = fn, + }; + return device_for_each_child(&root, &recurse_data, descend_children); } /** @@ -105,12 +120,6 @@ static int match_device(struct parisc_driver *driver, struct parisc_device *dev) return 0; } -static void claim_device(struct parisc_driver *driver, struct parisc_device *dev) -{ - dev->driver = driver; - request_mem_region(dev->hpa, 0x1000, driver->name); -} - static int parisc_driver_probe(struct device *dev) { int rc; @@ -119,8 +128,8 @@ static int parisc_driver_probe(struct device *dev) rc = pa_drv->probe(pa_dev); - if(!rc) - claim_device(pa_drv, pa_dev); + if (!rc) + pa_dev->driver = pa_drv; return rc; } @@ -131,7 +140,6 @@ static int parisc_driver_remove(struct device *dev) struct parisc_driver *pa_drv = to_parisc_driver(dev->driver); if (pa_drv->remove) pa_drv->remove(pa_dev); - release_mem_region(pa_dev->hpa, 0x1000); return 0; } @@ -173,6 +181,24 @@ int register_parisc_driver(struct parisc_driver *driver) } EXPORT_SYMBOL(register_parisc_driver); + +struct match_count { + struct parisc_driver * driver; + int count; +}; + +static int match_and_count(struct device * dev, void * data) +{ + struct match_count * m = data; + struct parisc_device * pdev = to_parisc_device(dev); + + if (check_dev(dev)) { + if (match_device(m->driver, pdev)) + m->count++; + } + return 0; +} + /** * count_parisc_driver - count # of devices this driver would match * @driver: the PA-RISC driver to try @@ -182,15 +208,14 @@ EXPORT_SYMBOL(register_parisc_driver); */ int count_parisc_driver(struct parisc_driver *driver) { - struct parisc_device *device; - int cnt = 0; + struct match_count m = { + .driver = driver, + .count = 0, + }; - for_each_padev(device) { - if (match_device(driver, device)) - cnt++; - } + for_each_padev(match_and_count, &m); - return cnt; + return m.count; } @@ -206,14 +231,34 @@ int unregister_parisc_driver(struct parisc_driver *driver) } EXPORT_SYMBOL(unregister_parisc_driver); -static struct parisc_device *find_device_by_addr(unsigned long hpa) +struct find_data { + unsigned long hpa; + struct parisc_device * dev; +}; + +static int find_device(struct device * dev, void * data) { - struct parisc_device *dev; - for_each_padev(dev) { - if (dev->hpa == hpa) - return dev; + struct parisc_device * pdev = to_parisc_device(dev); + struct find_data * d = (struct find_data*)data; + + if (check_dev(dev)) { + if (pdev->hpa.start == d->hpa) { + d->dev = pdev; + return 1; + } } - return NULL; + return 0; +} + +static struct parisc_device *find_device_by_addr(unsigned long hpa) +{ + struct find_data d = { + .hpa = hpa, + }; + int ret; + + ret = for_each_padev(find_device, &d); + return ret ? d.dev : NULL; } /** @@ -387,6 +432,23 @@ struct parisc_device * create_tree_node(char id, struct device *parent) return dev; } +struct match_id_data { + char id; + struct parisc_device * dev; +}; + +static int match_by_id(struct device * dev, void * data) +{ + struct parisc_device * pdev = to_parisc_device(dev); + struct match_id_data * d = data; + + if (pdev->hw_path == d->id) { + d->dev = pdev; + return 1; + } + return 0; +} + /** * alloc_tree_node - returns a device entry in the iotree * @parent: the parent node in the tree @@ -397,15 +459,13 @@ struct parisc_device * create_tree_node(char id, struct device *parent) */ static struct parisc_device * alloc_tree_node(struct device *parent, char id) { - struct device *dev; - - list_for_each_entry(dev, &parent->children, node) { - struct parisc_device *padev = to_parisc_device(dev); - if (padev->hw_path == id) - return padev; - } - - return create_tree_node(id, parent); + struct match_id_data d = { + .id = id, + }; + if (device_for_each_child(parent, &d, match_by_id)) + return d.dev; + else + return create_tree_node(id, parent); } static struct parisc_device *create_parisc_device(struct hardware_path *modpath) @@ -439,10 +499,8 @@ alloc_pa_dev(unsigned long hpa, struct hardware_path *mod_path) dev = create_parisc_device(mod_path); if (dev->id.hw_type != HPHW_FAULTY) { - char p[64]; - print_pa_hwpath(dev, p); printk("Two devices have hardware path %s. Please file a bug with HP.\n" - "In the meantime, you could try rearranging your cards.\n", p); + "In the meantime, you could try rearranging your cards.\n", parisc_pathname(dev)); return NULL; } @@ -451,12 +509,27 @@ alloc_pa_dev(unsigned long hpa, struct hardware_path *mod_path) dev->id.hversion_rev = iodc_data[1] & 0x0f; dev->id.sversion = ((iodc_data[4] & 0x0f) << 16) | (iodc_data[5] << 8) | iodc_data[6]; - dev->hpa = hpa; + dev->hpa.name = parisc_pathname(dev); + dev->hpa.start = hpa; + if (hpa == 0xf4000000 || hpa == 0xf6000000 || + hpa == 0xf8000000 || hpa == 0xfa000000) { + dev->hpa.end = hpa + 0x01ffffff; + } else { + dev->hpa.end = hpa + 0xfff; + } + dev->hpa.flags = IORESOURCE_MEM; name = parisc_hardware_description(&dev->id); if (name) { strlcpy(dev->name, name, sizeof(dev->name)); } + /* Silently fail things like mouse ports which are subsumed within + * the keyboard controller + */ + if ((hpa & 0xfff) == 0 && insert_resource(&iomem_resource, &dev->hpa)) + printk("Unable to claim HPA %lx for device %s\n", + hpa, name); + return dev; } @@ -555,6 +628,33 @@ static int match_parisc_device(struct device *dev, int index, return (curr->hw_path == id); } +struct parse_tree_data { + int index; + struct hardware_path * modpath; + struct device * dev; +}; + +static int check_parent(struct device * dev, void * data) +{ + struct parse_tree_data * d = data; + + if (check_dev(dev)) { + if (dev->bus == &parisc_bus_type) { + if (match_parisc_device(dev, d->index, d->modpath)) + d->dev = dev; + } else if (is_pci_dev(dev)) { + if (match_pci_device(dev, d->index, d->modpath)) + d->dev = dev; + } else if (dev->bus == NULL) { + /* we are on a bus bridge */ + struct device *new = parse_tree_node(dev, d->index, d->modpath); + if (new) + d->dev = new; + } + } + return d->dev != NULL; +} + /** * parse_tree_node - returns a device entry in the iotree * @parent: the parent node in the tree @@ -568,24 +668,18 @@ static int match_parisc_device(struct device *dev, int index, static struct device * parse_tree_node(struct device *parent, int index, struct hardware_path *modpath) { - struct device *device; - - list_for_each_entry(device, &parent->children, node) { - if (device->bus == &parisc_bus_type) { - if (match_parisc_device(device, index, modpath)) - return device; - } else if (is_pci_dev(device)) { - if (match_pci_device(device, index, modpath)) - return device; - } else if (device->bus == NULL) { - /* we are on a bus bridge */ - struct device *new = parse_tree_node(device, index, modpath); - if (new) - return new; - } - } + struct parse_tree_data d = { + .index = index, + .modpath = modpath, + }; - return NULL; + struct recurse_struct recurse_data = { + .obj = &d, + .fn = check_parent, + }; + + device_for_each_child(parent, &recurse_data, descend_children); + return d.dev; } /** @@ -636,7 +730,7 @@ EXPORT_SYMBOL(device_to_hwpath); ((dev->id.hw_type == HPHW_IOA) || (dev->id.hw_type == HPHW_BCPORT)) #define IS_LOWER_PORT(dev) \ - ((gsc_readl(dev->hpa + offsetof(struct bc_module, io_status)) \ + ((gsc_readl(dev->hpa.start + offsetof(struct bc_module, io_status)) \ & BC_PORT_MASK) == BC_LOWER_PORT) #define MAX_NATIVE_DEVICES 64 @@ -645,8 +739,8 @@ EXPORT_SYMBOL(device_to_hwpath); #define FLEX_MASK F_EXTEND(0xfffc0000) #define IO_IO_LOW offsetof(struct bc_module, io_io_low) #define IO_IO_HIGH offsetof(struct bc_module, io_io_high) -#define READ_IO_IO_LOW(dev) (unsigned long)(signed int)gsc_readl(dev->hpa + IO_IO_LOW) -#define READ_IO_IO_HIGH(dev) (unsigned long)(signed int)gsc_readl(dev->hpa + IO_IO_HIGH) +#define READ_IO_IO_LOW(dev) (unsigned long)(signed int)gsc_readl(dev->hpa.start + IO_IO_LOW) +#define READ_IO_IO_HIGH(dev) (unsigned long)(signed int)gsc_readl(dev->hpa.start + IO_IO_HIGH) static void walk_native_bus(unsigned long io_io_low, unsigned long io_io_high, struct device *parent); @@ -655,10 +749,10 @@ void walk_lower_bus(struct parisc_device *dev) { unsigned long io_io_low, io_io_high; - if(!BUS_CONVERTER(dev) || IS_LOWER_PORT(dev)) + if (!BUS_CONVERTER(dev) || IS_LOWER_PORT(dev)) return; - if(dev->id.hw_type == HPHW_IOA) { + if (dev->id.hw_type == HPHW_IOA) { io_io_low = (unsigned long)(signed int)(READ_IO_IO_LOW(dev) << 16); io_io_high = io_io_low + MAX_NATIVE_DEVICES * NATIVE_DEVICE_OFFSET; } else { @@ -731,7 +825,7 @@ static void print_parisc_device(struct parisc_device *dev) print_pa_hwpath(dev, hw_path); printk(KERN_INFO "%d. %s at 0x%lx [%s] { %d, 0x%x, 0x%.3x, 0x%.5x }", - ++count, dev->name, dev->hpa, hw_path, dev->id.hw_type, + ++count, dev->name, dev->hpa.start, hw_path, dev->id.hw_type, dev->id.hversion_rev, dev->id.hversion, dev->id.sversion); if (dev->num_addrs) { @@ -753,13 +847,20 @@ void init_parisc_bus(void) get_device(&root); } + +static int print_one_device(struct device * dev, void * data) +{ + struct parisc_device * pdev = to_parisc_device(dev); + + if (check_dev(dev)) + print_parisc_device(pdev); + return 0; +} + /** * print_parisc_devices - Print out a list of devices found in this system */ void print_parisc_devices(void) { - struct parisc_device *dev; - for_each_padev(dev) { - print_parisc_device(dev); - } + for_each_padev(print_one_device, NULL); } diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index be0f07f2fa58..c7e66ee5b083 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -30,14 +30,14 @@ * - save registers to kernel stack and handle in assembly or C */ +#include <asm/psw.h> #include <asm/assembly.h> /* for LDREG/STREG defines */ #include <asm/pgtable.h> -#include <asm/psw.h> #include <asm/signal.h> #include <asm/unistd.h> #include <asm/thread_info.h> -#ifdef __LP64__ +#ifdef CONFIG_64BIT #define CMPIB cmpib,* #define CMPB cmpb,* #define COND(x) *x @@ -67,19 +67,22 @@ /* Switch to virtual mapping, trashing only %r1 */ .macro virt_map - rsm PSW_SM_Q,%r0 - tovirt_r1 %r29 - mfsp %sr7, %r1 - or,= %r0,%r1,%r0 /* Only save sr7 in sr3 if sr7 != 0 */ - mtsp %r1, %sr3 + /* pcxt_ssm_bug */ + rsm PSW_SM_I, %r0 /* barrier for "Relied upon Translation */ mtsp %r0, %sr4 mtsp %r0, %sr5 + mfsp %sr7, %r1 + or,= %r0,%r1,%r0 /* Only save sr7 in sr3 if sr7 != 0 */ + mtsp %r1, %sr3 + tovirt_r1 %r29 + load32 KERNEL_PSW, %r1 + + rsm PSW_SM_QUIET,%r0 /* second "heavy weight" ctl op */ mtsp %r0, %sr6 mtsp %r0, %sr7 - load32 KERNEL_PSW, %r1 - mtctl %r1, %cr22 mtctl %r0, %cr17 /* Clear IIASQ tail */ mtctl %r0, %cr17 /* Clear IIASQ head */ + mtctl %r1, %ipsw load32 4f, %r1 mtctl %r1, %cr18 /* Set IIAOQ tail */ ldo 4(%r1), %r1 @@ -214,7 +217,7 @@ va = r8 /* virtual address for which the trap occured */ spc = r24 /* space for which the trap occured */ -#ifndef __LP64__ +#ifndef CONFIG_64BIT /* * itlb miss interruption handler (parisc 1.1 - 32 bit) @@ -236,7 +239,7 @@ .macro itlb_20 code mfctl %pcsq, spc -#ifdef __LP64__ +#ifdef CONFIG_64BIT b itlb_miss_20w #else b itlb_miss_20 @@ -246,7 +249,7 @@ .align 32 .endm -#ifndef __LP64__ +#ifndef CONFIG_64BIT /* * naitlb miss interruption handler (parisc 1.1 - 32 bit) * @@ -283,7 +286,7 @@ .macro naitlb_20 code mfctl %isr,spc -#ifdef __LP64__ +#ifdef CONFIG_64BIT b itlb_miss_20w #else b itlb_miss_20 @@ -296,7 +299,7 @@ .align 32 .endm -#ifndef __LP64__ +#ifndef CONFIG_64BIT /* * dtlb miss interruption handler (parisc 1.1 - 32 bit) */ @@ -318,7 +321,7 @@ .macro dtlb_20 code mfctl %isr, spc -#ifdef __LP64__ +#ifdef CONFIG_64BIT b dtlb_miss_20w #else b dtlb_miss_20 @@ -328,7 +331,7 @@ .align 32 .endm -#ifndef __LP64__ +#ifndef CONFIG_64BIT /* nadtlb miss interruption handler (parisc 1.1 - 32 bit) */ .macro nadtlb_11 code @@ -346,7 +349,7 @@ .macro nadtlb_20 code mfctl %isr,spc -#ifdef __LP64__ +#ifdef CONFIG_64BIT b nadtlb_miss_20w #else b nadtlb_miss_20 @@ -356,7 +359,7 @@ .align 32 .endm -#ifndef __LP64__ +#ifndef CONFIG_64BIT /* * dirty bit trap interruption handler (parisc 1.1 - 32 bit) */ @@ -378,7 +381,7 @@ .macro dbit_20 code mfctl %isr,spc -#ifdef __LP64__ +#ifdef CONFIG_64BIT b dbit_trap_20w #else b dbit_trap_20 @@ -391,7 +394,7 @@ /* The following are simple 32 vs 64 bit instruction * abstractions for the macros */ .macro EXTR reg1,start,length,reg2 -#ifdef __LP64__ +#ifdef CONFIG_64BIT extrd,u \reg1,32+\start,\length,\reg2 #else extrw,u \reg1,\start,\length,\reg2 @@ -399,7 +402,7 @@ .endm .macro DEP reg1,start,length,reg2 -#ifdef __LP64__ +#ifdef CONFIG_64BIT depd \reg1,32+\start,\length,\reg2 #else depw \reg1,\start,\length,\reg2 @@ -407,7 +410,7 @@ .endm .macro DEPI val,start,length,reg -#ifdef __LP64__ +#ifdef CONFIG_64BIT depdi \val,32+\start,\length,\reg #else depwi \val,\start,\length,\reg @@ -418,7 +421,7 @@ * fault. We have to extract this and place it in the va, * zeroing the corresponding bits in the space register */ .macro space_adjust spc,va,tmp -#ifdef __LP64__ +#ifdef CONFIG_64BIT extrd,u \spc,63,SPACEID_SHIFT,\tmp depd %r0,63,SPACEID_SHIFT,\spc depd \tmp,31,SPACEID_SHIFT,\va @@ -476,7 +479,7 @@ bb,>=,n \pmd,_PxD_PRESENT_BIT,\fault DEP %r0,31,PxD_FLAG_SHIFT,\pmd /* clear flags */ copy \pmd,%r9 -#ifdef __LP64__ +#ifdef CONFIG_64BIT shld %r9,PxD_VALUE_SHIFT,\pmd #else shlw %r9,PxD_VALUE_SHIFT,\pmd @@ -607,7 +610,7 @@ .macro do_alias spc,tmp,tmp1,va,pte,prot,fault cmpib,COND(<>),n 0,\spc,\fault ldil L%(TMPALIAS_MAP_START),\tmp -#if defined(__LP64__) && (TMPALIAS_MAP_START >= 0x80000000) +#if defined(CONFIG_64BIT) && (TMPALIAS_MAP_START >= 0x80000000) /* on LP64, ldi will sign extend into the upper 32 bits, * which is behaviour we don't want */ depdi 0,31,32,\tmp @@ -621,7 +624,7 @@ * OK, it is in the temp alias region, check whether "from" or "to". * Check "subtle" note in pacache.S re: r23/r26. */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT extrd,u,*= \va,41,1,%r0 #else extrw,u,= \va,9,1,%r0 @@ -688,7 +691,7 @@ fault_vector_20: def 30 def 31 -#ifndef __LP64__ +#ifndef CONFIG_64BIT .export fault_vector_11 @@ -761,7 +764,7 @@ __kernel_thread: copy %r30, %r1 ldo PT_SZ_ALGN(%r30),%r30 -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* Yo, function pointers in wide mode are little structs... -PB */ ldd 24(%r26), %r2 STREG %r2, PT_GR27(%r1) /* Store childs %dp */ @@ -777,7 +780,7 @@ __kernel_thread: or %r26, %r24, %r26 /* will have kernel mappings. */ ldi 1, %r25 /* stack_start, signals kernel thread */ stw %r0, -52(%r30) /* user_tid */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif BL do_fork, %r2 @@ -806,7 +809,7 @@ ret_from_kernel_thread: LDREG TI_TASK-THREAD_SZ_ALGN(%r30), %r1 LDREG TASK_PT_GR25(%r1), %r26 -#ifdef __LP64__ +#ifdef CONFIG_64BIT LDREG TASK_PT_GR27(%r1), %r27 LDREG TASK_PT_GR22(%r1), %r22 #endif @@ -814,11 +817,16 @@ ret_from_kernel_thread: ble 0(%sr7, %r1) copy %r31, %r2 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ loadgp /* Thread could have been in a module */ #endif +#ifndef CONFIG_64BIT b sys_exit +#else + load32 sys_exit, %r1 + bv %r0(%r1) +#endif ldi 0, %r26 .import sys_execve, code @@ -830,7 +838,7 @@ __execve: STREG %r26, PT_GR26(%r16) STREG %r25, PT_GR25(%r16) STREG %r24, PT_GR24(%r16) -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif BL sys_execve, %r2 @@ -855,6 +863,7 @@ __execve: _switch_to: STREG %r2, -RP_OFFSET(%r30) + callee_save_float callee_save load32 _switch_to_ret, %r2 @@ -871,6 +880,7 @@ _switch_to: _switch_to_ret: mtctl %r0, %cr0 /* Needed for single stepping */ callee_rest + callee_rest_float LDREG -RP_OFFSET(%r30), %r2 bv %r0(%r2) @@ -888,9 +898,6 @@ _switch_to_ret: * this way, then we will need to copy %sr3 in to PT_SR[3..7], and * adjust IASQ[0..1]. * - * Note that the following code uses a "relied upon translation". - * See the parisc ACD for details. The ssm is necessary due to a - * PCXT bug. */ .align 4096 @@ -911,7 +918,7 @@ syscall_exit_rfi: STREG %r19,PT_IAOQ1(%r16) LDREG PT_PSW(%r16),%r19 load32 USER_PSW_MASK,%r1 -#ifdef __LP64__ +#ifdef CONFIG_64BIT load32 USER_PSW_HI_MASK,%r20 depd %r20,31,32,%r1 #endif @@ -955,7 +962,7 @@ intr_return: /* shift left ____cacheline_aligned (aka L1_CACHE_BYTES) amount ** irq_stat[] is defined using ____cacheline_aligned. */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT shld %r1, 6, %r20 #else shlw %r1, 5, %r20 @@ -963,9 +970,6 @@ intr_return: add %r19,%r20,%r19 /* now have &irq_stat[smp_processor_id()] */ #endif /* CONFIG_SMP */ - LDREG IRQSTAT_SIRQ_PEND(%r19),%r20 /* hardirq.h: unsigned long */ - cmpib,<>,n 0,%r20,intr_do_softirq /* forward */ - intr_check_resched: /* check for reschedule */ @@ -985,24 +989,19 @@ intr_restore: rest_fp %r1 rest_general %r29 - /* Create a "relied upon translation" PA 2.0 Arch. F-5 */ - ssm 0,%r0 - nop - nop - nop - nop - nop - nop - nop + /* inverse of virt_map */ + pcxt_ssm_bug + rsm PSW_SM_QUIET,%r0 /* prepare for rfi */ tophys_r1 %r29 - rsm (PSW_SM_Q|PSW_SM_P|PSW_SM_D|PSW_SM_I),%r0 /* Restore space id's and special cr's from PT_REGS - * structure pointed to by r29 */ + * structure pointed to by r29 + */ rest_specials %r29 - /* Important: Note that rest_stack restores r29 - * last (we are using it)! It also restores r1 and r30. */ + /* IMPORTANT: rest_stack restores r29 last (we are using it)! + * It also restores r1 and r30. + */ rest_stack rfi @@ -1015,17 +1014,6 @@ intr_restore: nop nop - .import do_softirq,code -intr_do_softirq: - bl do_softirq,%r2 -#ifdef __LP64__ - ldo -16(%r30),%r29 /* Reference param save area */ -#else - nop -#endif - b intr_check_resched - nop - .import schedule,code intr_do_resched: /* Only do reschedule if we are returning to user space */ @@ -1036,12 +1024,17 @@ intr_do_resched: CMPIB= 0,%r20,intr_restore /* backward */ nop -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif ldil L%intr_check_sig, %r2 +#ifndef CONFIG_64BIT b schedule +#else + load32 schedule, %r20 + bv %r0(%r20) +#endif ldo R%intr_check_sig(%r2), %r2 @@ -1064,7 +1057,7 @@ intr_do_signal: copy %r0, %r24 /* unsigned long in_syscall */ copy %r16, %r25 /* struct pt_regs *regs */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif @@ -1088,7 +1081,7 @@ intr_extint: mfctl %cr31,%r1 copy %r30,%r17 /* FIXME! depi below has hardcoded idea of interrupt stack size (32k)*/ -#ifdef __LP64__ +#ifdef CONFIG_64BIT depdi 0,63,15,%r17 #else depi 0,31,15,%r17 @@ -1115,7 +1108,7 @@ intr_extint: ldil L%intr_return, %r2 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif @@ -1153,15 +1146,17 @@ intr_save: CMPIB=,n 6,%r26,skip_save_ior - /* save_specials left ipsw value in r8 for us to test */ mfctl %cr20, %r16 /* isr */ + nop /* serialize mfctl on PA 2.0 to avoid 4 cycle penalty */ mfctl %cr21, %r17 /* ior */ -#ifdef __LP64__ + +#ifdef CONFIG_64BIT /* * If the interrupted code was running with W bit off (32 bit), * clear the b bits (bits 0 & 1) in the ior. + * save_specials left ipsw value in r8 for us to test. */ extrd,u,*<> %r8,PSW_W_BIT,1,%r0 depdi 0,1,2,%r17 @@ -1192,7 +1187,7 @@ skip_save_ior: loadgp copy %r29, %r25 /* arg1 is pt_regs */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif @@ -1230,7 +1225,7 @@ skip_save_ior: spc = r24 /* space for which the trap occured */ ptp = r25 /* page directory/page table pointer */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT dtlb_miss_20w: space_adjust spc,va,t0 @@ -1487,10 +1482,10 @@ nadtlb_emulate: add,l %r1,%r24,%r1 /* doesn't affect c/b bits */ nadtlb_nullify: - mfctl %cr22,%r8 /* Get ipsw */ + mfctl %ipsw,%r8 ldil L%PSW_N,%r9 or %r8,%r9,%r8 /* Set PSW_N */ - mtctl %r8,%cr22 + mtctl %r8,%ipsw rfir nop @@ -1521,7 +1516,7 @@ nadtlb_probe_check: nop -#ifdef __LP64__ +#ifdef CONFIG_64BIT itlb_miss_20w: /* @@ -1588,7 +1583,7 @@ itlb_miss_20: #endif -#ifdef __LP64__ +#ifdef CONFIG_64BIT dbit_trap_20w: space_adjust spc,va,t0 @@ -1797,7 +1792,7 @@ sys_fork_wrapper: STREG %r2,-RP_OFFSET(%r30) ldo FRAME_SIZE(%r30),%r30 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif @@ -1847,7 +1842,7 @@ sys_clone_wrapper: STREG %r2,-RP_OFFSET(%r30) ldo FRAME_SIZE(%r30),%r30 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif @@ -1869,7 +1864,7 @@ sys_vfork_wrapper: STREG %r2,-RP_OFFSET(%r30) ldo FRAME_SIZE(%r30),%r30 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif @@ -1897,10 +1892,10 @@ sys_vfork_wrapper: STREG %r2,-RP_OFFSET(%r30) ldo FRAME_SIZE(%r30),%r30 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif - bl \execve,%r2 + BL \execve,%r2 copy %r1,%arg0 ldo -FRAME_SIZE(%r30),%r30 @@ -1923,7 +1918,7 @@ error_\execve: sys_execve_wrapper: execve_wrapper sys_execve -#ifdef __LP64__ +#ifdef CONFIG_64BIT .export sys32_execve_wrapper .import sys32_execve @@ -1937,7 +1932,7 @@ sys_rt_sigreturn_wrapper: ldo TASK_REGS(%r26),%r26 /* get pt regs */ /* Don't save regs, we are going to restore them from sigcontext. */ STREG %r2, -RP_OFFSET(%r30) -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo FRAME_SIZE(%r30), %r30 BL sys_rt_sigreturn,%r2 ldo -16(%r30),%r29 /* Reference param save area */ @@ -1968,7 +1963,7 @@ sys_sigaltstack_wrapper: ldo TASK_REGS(%r1),%r24 /* get pt regs */ LDREG TASK_PT_GR30(%r24),%r24 STREG %r2, -RP_OFFSET(%r30) -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo FRAME_SIZE(%r30), %r30 b,l do_sigaltstack,%r2 ldo -16(%r30),%r29 /* Reference param save area */ @@ -1982,7 +1977,7 @@ sys_sigaltstack_wrapper: bv %r0(%r2) nop -#ifdef __LP64__ +#ifdef CONFIG_64BIT .export sys32_sigaltstack_wrapper sys32_sigaltstack_wrapper: /* Get the user stack pointer */ @@ -2006,7 +2001,7 @@ sys_rt_sigsuspend_wrapper: reg_save %r24 STREG %r2, -RP_OFFSET(%r30) -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo FRAME_SIZE(%r30), %r30 b,l sys_rt_sigsuspend,%r2 ldo -16(%r30),%r29 /* Reference param save area */ @@ -2079,7 +2074,7 @@ syscall_check_bh: ldw TI_CPU-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r26 /* cpu # */ /* shift left ____cacheline_aligned (aka L1_CACHE_BYTES) bits */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT shld %r26, 6, %r20 #else shlw %r26, 5, %r20 @@ -2087,9 +2082,6 @@ syscall_check_bh: add %r19,%r20,%r19 /* now have &irq_stat[smp_processor_id()] */ #endif /* CONFIG_SMP */ - LDREG IRQSTAT_SIRQ_PEND(%r19),%r20 /* hardirq.h: unsigned long */ - cmpib,<>,n 0,%r20,syscall_do_softirq /* forward */ - syscall_check_resched: /* check for reschedule */ @@ -2144,7 +2136,7 @@ syscall_restore: depi 3,31,2,%r31 /* ensure return to user mode. */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* decide whether to reset the wide mode bit * * For a syscall, the W bit is stored in the lowest bit @@ -2227,20 +2219,10 @@ pt_regs_ok: b intr_restore nop - .import do_softirq,code -syscall_do_softirq: - bl do_softirq,%r2 - nop - /* NOTE: We enable I-bit incase we schedule later, - * and we might be going back to userspace if we were - * traced. */ - b syscall_check_resched - ssm PSW_SM_I, %r0 /* do_softirq returns with I bit off */ - .import schedule,code syscall_do_resched: BL schedule,%r2 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #else nop @@ -2260,7 +2242,7 @@ syscall_do_signal: ldi 1, %r24 /* unsigned long in_syscall */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif BL do_signal,%r2 diff --git a/arch/parisc/kernel/firmware.c b/arch/parisc/kernel/firmware.c index f244fb200db1..553f8fe03224 100644 --- a/arch/parisc/kernel/firmware.c +++ b/arch/parisc/kernel/firmware.c @@ -83,15 +83,15 @@ static unsigned long pdc_result2[32] __attribute__ ((aligned (8))); int parisc_narrow_firmware = 1; #endif -/* on all currently-supported platforms, IODC I/O calls are always - * 32-bit calls, and MEM_PDC calls are always the same width as the OS. - * This means Cxxx boxes can't run wide kernels right now. -PB +/* On most currently-supported platforms, IODC I/O calls are 32-bit calls + * and MEM_PDC calls are always the same width as the OS. + * Some PAT boxes may have 64-bit IODC I/O. * - * CONFIG_PDC_NARROW has been added to allow 64-bit kernels to run on - * systems with 32-bit MEM_PDC calls. This will allow wide kernels to - * run on Cxxx boxes now. -RB - * - * Note that some PAT boxes may have 64-bit IODC I/O... + * Ryan Bradetich added the now obsolete CONFIG_PDC_NARROW to allow + * 64-bit kernels to run on systems with 32-bit MEM_PDC calls. + * This allowed wide kernels to run on Cxxx boxes. + * We now detect 32-bit-only PDC and dynamically switch to 32-bit mode + * when running a 64-bit kernel on such boxes (e.g. C200 or C360). */ #ifdef __LP64__ diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S index 28405edf8448..0b47afc20690 100644 --- a/arch/parisc/kernel/head.S +++ b/arch/parisc/kernel/head.S @@ -12,7 +12,7 @@ * Initial Version 04-23-1999 by Helge Deller <deller@gmx.de> */ -#include <linux/autoconf.h> /* for CONFIG_SMP */ +#include <linux/config.h> /* for CONFIG_SMP */ #include <asm/asm-offsets.h> #include <asm/psw.h> @@ -36,10 +36,10 @@ boot_args: .align 4 .import init_thread_union,data .import fault_vector_20,code /* IVA parisc 2.0 32 bit */ -#ifndef __LP64__ +#ifndef CONFIG_64BIT .import fault_vector_11,code /* IVA parisc 1.1 32 bit */ .import $global$ /* forward declaration */ -#endif /*!LP64*/ +#endif /*!CONFIG_64BIT*/ .export stext .export _stext,data /* Kernel want it this way! */ _stext: @@ -76,7 +76,7 @@ $bss_loop: mtctl %r4,%cr24 /* Initialize kernel root pointer */ mtctl %r4,%cr25 /* Initialize user root pointer */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* Set pmd in pgd */ load32 PA(pmd0),%r5 shrd %r5,PxD_VALUE_SHIFT,%r3 @@ -99,7 +99,7 @@ $bss_loop: stw %r3,0(%r4) ldo (ASM_PAGE_SIZE >> PxD_VALUE_SHIFT)(%r3),%r3 addib,> -1,%r1,1b -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo ASM_PMD_ENTRY_SIZE(%r4),%r4 #else ldo ASM_PGD_ENTRY_SIZE(%r4),%r4 @@ -170,7 +170,7 @@ common_stext: stw %r0,0x28(%r0) /* MEM_RENDEZ_HI */ #endif /*CONFIG_SMP*/ -#ifdef __LP64__ +#ifdef CONFIG_64BIT tophys_r1 %sp /* Save the rfi target address */ @@ -224,8 +224,6 @@ stext_pdc_ret: mtctl %r0,%cr12 mtctl %r0,%cr13 - /* Prepare to RFI! Man all the cannons! */ - /* Initialize the global data pointer */ loadgp @@ -235,7 +233,7 @@ stext_pdc_ret: * following short sequence of instructions can determine this * (without being illegal on a PA1.1 machine). */ -#ifndef __LP64__ +#ifndef CONFIG_64BIT ldi 32,%r10 mtctl %r10,%cr11 .level 2.0 @@ -248,52 +246,22 @@ stext_pdc_ret: $is_pa20: .level LEVEL /* restore 1.1 || 2.0w */ -#endif /*!LP64*/ +#endif /*!CONFIG_64BIT*/ load32 PA(fault_vector_20),%r10 $install_iva: mtctl %r10,%cr14 -#ifdef __LP64__ - b aligned_rfi + b aligned_rfi /* Prepare to RFI! Man all the cannons! */ nop - .align 256 + .align 128 aligned_rfi: - ssm 0,0 - nop /* 1 */ - nop /* 2 */ - nop /* 3 */ - nop /* 4 */ - nop /* 5 */ - nop /* 6 */ - nop /* 7 */ - nop /* 8 */ -#endif + pcxt_ssm_bug -#ifdef __LP64__ /* move to psw.h? */ -#define PSW_BITS PSW_Q+PSW_I+PSW_D+PSW_P+PSW_R -#else -#define PSW_BITS PSW_SM_Q -#endif + rsm PSW_SM_QUIET,%r0 /* off troublesome PSW bits */ + /* Don't need NOPs, have 8 compliant insn before rfi */ -$rfi: - /* turn off troublesome PSW bits */ - rsm PSW_BITS,%r0 - - /* kernel PSW: - * - no interruptions except HPMC and TOC (which are handled by PDC) - * - Q bit set (IODC / PDC interruptions) - * - big-endian - * - virtually mapped - */ - load32 KERNEL_PSW,%r10 - mtctl %r10,%ipsw - - /* Set the space pointers for the post-RFI world - ** Clear the two-level IIA Space Queue, effectively setting - ** Kernel space. - */ mtctl %r0,%cr17 /* Clear IIASQ tail */ mtctl %r0,%cr17 /* Clear IIASQ head */ @@ -301,8 +269,11 @@ $rfi: mtctl %r11,%cr18 /* IIAOQ head */ ldo 4(%r11),%r11 mtctl %r11,%cr18 /* IIAOQ tail */ + + load32 KERNEL_PSW,%r10 + mtctl %r10,%ipsw - /* Jump to hyperspace */ + /* Jump through hyperspace to Virt Mode */ rfi nop @@ -313,7 +284,7 @@ $rfi: .import smp_init_current_idle_task,data .import smp_callin,code -#ifndef __LP64__ +#ifndef CONFIG_64BIT smp_callin_rtn: .proc .callinfo @@ -321,7 +292,7 @@ smp_callin_rtn: nop nop .procend -#endif /*!LP64*/ +#endif /*!CONFIG_64BIT*/ /*************************************************************************** * smp_slave_stext is executed by all non-monarch Processors when the Monarch @@ -356,7 +327,7 @@ smp_slave_stext: mtctl %r4,%cr24 /* Initialize kernel root pointer */ mtctl %r4,%cr25 /* Initialize user root pointer */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* Setup PDCE_PROC entry */ copy %arg0,%r3 #else @@ -373,7 +344,7 @@ smp_slave_stext: .procend #endif /* CONFIG_SMP */ -#ifndef __LP64__ +#ifndef CONFIG_64BIT .data .align 4 @@ -383,4 +354,4 @@ smp_slave_stext: .size $global$,4 $global$: .word 0 -#endif /*!LP64*/ +#endif /*!CONFIG_64BIT*/ diff --git a/arch/parisc/kernel/ioctl32.c b/arch/parisc/kernel/ioctl32.c index 1d3824b670d1..0a331104ad56 100644 --- a/arch/parisc/kernel/ioctl32.c +++ b/arch/parisc/kernel/ioctl32.c @@ -104,12 +104,9 @@ static int drm32_version(unsigned int fd, unsigned int cmd, unsigned long arg) } out: - if (kversion.name) - kfree(kversion.name); - if (kversion.date) - kfree(kversion.date); - if (kversion.desc) - kfree(kversion.desc); + kfree(kversion.name); + kfree(kversion.date); + kfree(kversion.desc); return ret; } @@ -166,9 +163,7 @@ static int drm32_getsetunique(unsigned int fd, unsigned int cmd, unsigned long a ret = -EFAULT; } - if (karg.unique != NULL) - kfree(karg.unique); - + kfree(karg.unique); return ret; } @@ -265,7 +260,6 @@ static int drm32_info_bufs(unsigned int fd, unsigned int cmd, unsigned long arg) } kfree(karg.list); - return ret; } @@ -305,7 +299,6 @@ static int drm32_free_bufs(unsigned int fd, unsigned int cmd, unsigned long arg) out: kfree(karg.list); - return ret; } @@ -494,15 +487,10 @@ static int drm32_dma(unsigned int fd, unsigned int cmd, unsigned long arg) } out: - if (karg.send_indices) - kfree(karg.send_indices); - if (karg.send_sizes) - kfree(karg.send_sizes); - if (karg.request_indices) - kfree(karg.request_indices); - if (karg.request_sizes) - kfree(karg.request_sizes); - + kfree(karg.send_indices); + kfree(karg.send_sizes); + kfree(karg.request_indices); + kfree(karg.request_sizes); return ret; } @@ -555,9 +543,7 @@ static int drm32_res_ctx(unsigned int fd, unsigned int cmd, unsigned long arg) ret = -EFAULT; } - if (karg.contexts) - kfree(karg.contexts); - + kfree(karg.contexts); return ret; } @@ -575,11 +561,6 @@ IOCTL_TABLE_START #define DECLARES #include "compat_ioctl.c" -/* Might be moved to compat_ioctl.h with some ifdefs... */ -COMPATIBLE_IOCTL(TIOCSTART) -COMPATIBLE_IOCTL(TIOCSTOP) -COMPATIBLE_IOCTL(TIOCSLTC) - /* PA-specific ioctls */ COMPATIBLE_IOCTL(PA_PERF_ON) COMPATIBLE_IOCTL(PA_PERF_OFF) diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S index 77e03bc0f935..9534ee17b9be 100644 --- a/arch/parisc/kernel/pacache.S +++ b/arch/parisc/kernel/pacache.S @@ -26,7 +26,7 @@ * can be used. */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT #define ADDIB addib,* #define CMPB cmpb,* #define ANDCM andcm,* @@ -40,8 +40,10 @@ .level 2.0 #endif -#include <asm/assembly.h> +#include <linux/config.h> + #include <asm/psw.h> +#include <asm/assembly.h> #include <asm/pgtable.h> #include <asm/cache.h> @@ -62,32 +64,23 @@ flush_tlb_all_local: * to happen in real mode with all interruptions disabled. */ - /* - * Once again, we do the rfi dance ... some day we need examine - * all of our uses of this type of code and see what can be - * consolidated. - */ - - rsm PSW_SM_I, %r19 /* relied upon translation! PA 2.0 Arch. F-5 */ + /* pcxt_ssm_bug - relied upon translation! PA 2.0 Arch. F-4 and F-5 */ + rsm PSW_SM_I, %r19 /* save I-bit state */ + load32 PA(1f), %r1 nop nop nop nop nop - nop - nop - - rsm PSW_SM_Q, %r0 /* Turn off Q bit to load iia queue */ - ldil L%REAL_MODE_PSW, %r1 - ldo R%REAL_MODE_PSW(%r1), %r1 - mtctl %r1, %cr22 + + rsm PSW_SM_Q, %r0 /* prep to load iia queue */ mtctl %r0, %cr17 /* Clear IIASQ tail */ mtctl %r0, %cr17 /* Clear IIASQ head */ - ldil L%PA(1f), %r1 - ldo R%PA(1f)(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ head */ ldo 4(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ tail */ + load32 REAL_MODE_PSW, %r1 + mtctl %r1, %ipsw rfi nop @@ -178,29 +171,36 @@ fdtonemiddle: /* Loop if LOOP = 1 */ ADDIB> -1, %r22, fdtoneloop /* Outer loop count decr */ add %r21, %r20, %r20 /* increment space */ -fdtdone: - /* Switch back to virtual mode */ +fdtdone: + /* + * Switch back to virtual mode + */ + /* pcxt_ssm_bug */ + rsm PSW_SM_I, %r0 + load32 2f, %r1 + nop + nop + nop + nop + nop - rsm PSW_SM_Q, %r0 /* clear Q bit to load iia queue */ - ldil L%KERNEL_PSW, %r1 - ldo R%KERNEL_PSW(%r1), %r1 - or %r1, %r19, %r1 /* Set I bit if set on entry */ - mtctl %r1, %cr22 + rsm PSW_SM_Q, %r0 /* prep to load iia queue */ mtctl %r0, %cr17 /* Clear IIASQ tail */ mtctl %r0, %cr17 /* Clear IIASQ head */ - ldil L%(2f), %r1 - ldo R%(2f)(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ head */ ldo 4(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ tail */ + load32 KERNEL_PSW, %r1 + or %r1, %r19, %r1 /* I-bit to state on entry */ + mtctl %r1, %ipsw /* restore I-bit (entire PSW) */ rfi nop 2: bv %r0(%r2) nop - .exit + .exit .procend .export flush_instruction_cache_local,code @@ -227,7 +227,7 @@ flush_instruction_cache_local: fimanyloop: /* Loop if LOOP >= 2 */ ADDIB> -1, %r31, fimanyloop /* Adjusted inner loop decr */ - fice 0(%sr1, %arg0) + fice %r0(%sr1, %arg0) fice,m %arg1(%sr1, %arg0) /* Last fice and addr adjust */ movb,tr %arg3, %r31, fimanyloop /* Re-init inner loop count */ ADDIB<=,n -1, %arg2, fisync /* Outer loop decr */ @@ -238,7 +238,7 @@ fioneloop: /* Loop if LOOP = 1 */ fisync: sync - mtsm %r22 + mtsm %r22 /* restore I-bit */ bv %r0(%r2) nop .exit @@ -269,7 +269,7 @@ flush_data_cache_local: fdmanyloop: /* Loop if LOOP >= 2 */ ADDIB> -1, %r31, fdmanyloop /* Adjusted inner loop decr */ - fdce 0(%sr1, %arg0) + fdce %r0(%sr1, %arg0) fdce,m %arg1(%sr1, %arg0) /* Last fdce and addr adjust */ movb,tr %arg3, %r31, fdmanyloop /* Re-init inner loop count */ ADDIB<=,n -1, %arg2, fdsync /* Outer loop decr */ @@ -281,7 +281,7 @@ fdoneloop: /* Loop if LOOP = 1 */ fdsync: syncdma sync - mtsm %r22 + mtsm %r22 /* restore I-bit */ bv %r0(%r2) nop .exit @@ -296,7 +296,7 @@ copy_user_page_asm: .callinfo NO_CALLS .entry -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* PA8x00 CPUs can consume 2 loads or 1 store per cycle. * Unroll the loop by hand and arrange insn appropriately. * GCC probably can do this just as well. @@ -351,7 +351,11 @@ copy_user_page_asm: std %r22, 120(%r26) ldo 128(%r26), %r26 - ADDIB> -1, %r1, 1b /* bundle 10 */ + /* conditional branches nullify on forward taken branch, and on + * non-taken backward branch. Note that .+4 is a backwards branch. + * The ldd should only get executed if the branch is taken. + */ + ADDIB>,n -1, %r1, 1b /* bundle 10 */ ldd 0(%r25), %r19 /* start next loads */ #else @@ -363,10 +367,10 @@ copy_user_page_asm: * the full 64 bit register values on interrupt, we can't * use ldd/std on a 32 bit kernel. */ + ldw 0(%r25), %r19 ldi 64, %r1 /* PAGE_SIZE/64 == 64 */ 1: - ldw 0(%r25), %r19 ldw 4(%r25), %r20 ldw 8(%r25), %r21 ldw 12(%r25), %r22 @@ -396,11 +400,12 @@ copy_user_page_asm: ldw 60(%r25), %r22 stw %r19, 48(%r26) stw %r20, 52(%r26) + ldo 64(%r25), %r25 stw %r21, 56(%r26) stw %r22, 60(%r26) ldo 64(%r26), %r26 - ADDIB> -1, %r1, 1b - ldo 64(%r25), %r25 + ADDIB>,n -1, %r1, 1b + ldw 0(%r25), %r19 #endif bv %r0(%r2) nop @@ -456,7 +461,7 @@ copy_user_page_asm: sub %r25, %r1, %r23 /* move physical addr into non shadowed reg */ ldil L%(TMPALIAS_MAP_START), %r28 -#ifdef __LP64__ +#ifdef CONFIG_64BIT extrd,u %r26,56,32, %r26 /* convert phys addr to tlb insert format */ extrd,u %r23,56,32, %r23 /* convert phys addr to tlb insert format */ depd %r24,63,22, %r28 /* Form aliased virtual address 'to' */ @@ -543,7 +548,7 @@ __clear_user_page_asm: tophys_r1 %r26 ldil L%(TMPALIAS_MAP_START), %r28 -#ifdef __LP64__ +#ifdef CONFIG_64BIT #if (TMPALIAS_MAP_START >= 0x80000000) depdi 0, 31,32, %r28 /* clear any sign extension */ #endif @@ -560,7 +565,7 @@ __clear_user_page_asm: pdtlb 0(%r28) -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldi 32, %r1 /* PAGE_SIZE/128 == 32 */ /* PREFETCH (Write) has not (yet) been proven to help here */ @@ -585,7 +590,7 @@ __clear_user_page_asm: ADDIB> -1, %r1, 1b ldo 128(%r28), %r28 -#else /* ! __LP64 */ +#else /* ! CONFIG_64BIT */ ldi 64, %r1 /* PAGE_SIZE/64 == 64 */ @@ -608,7 +613,7 @@ __clear_user_page_asm: stw %r0, 60(%r28) ADDIB> -1, %r1, 1b ldo 64(%r28), %r28 -#endif /* __LP64 */ +#endif /* CONFIG_64BIT */ bv %r0(%r2) nop @@ -626,7 +631,7 @@ flush_kernel_dcache_page: ldil L%dcache_stride, %r1 ldw R%dcache_stride(%r1), %r23 -#ifdef __LP64__ +#ifdef CONFIG_64BIT depdi,z 1, 63-PAGE_SHIFT,1, %r25 #else depwi,z 1, 31-PAGE_SHIFT,1, %r25 @@ -670,7 +675,7 @@ flush_user_dcache_page: ldil L%dcache_stride, %r1 ldw R%dcache_stride(%r1), %r23 -#ifdef __LP64__ +#ifdef CONFIG_64BIT depdi,z 1,63-PAGE_SHIFT,1, %r25 #else depwi,z 1,31-PAGE_SHIFT,1, %r25 @@ -714,7 +719,7 @@ flush_user_icache_page: ldil L%dcache_stride, %r1 ldw R%dcache_stride(%r1), %r23 -#ifdef __LP64__ +#ifdef CONFIG_64BIT depdi,z 1, 63-PAGE_SHIFT,1, %r25 #else depwi,z 1, 31-PAGE_SHIFT,1, %r25 @@ -759,7 +764,7 @@ purge_kernel_dcache_page: ldil L%dcache_stride, %r1 ldw R%dcache_stride(%r1), %r23 -#ifdef __LP64__ +#ifdef CONFIG_64BIT depdi,z 1, 63-PAGE_SHIFT,1, %r25 #else depwi,z 1, 31-PAGE_SHIFT,1, %r25 @@ -807,7 +812,7 @@ flush_alias_page: tophys_r1 %r26 ldil L%(TMPALIAS_MAP_START), %r28 -#ifdef __LP64__ +#ifdef CONFIG_64BIT extrd,u %r26, 56,32, %r26 /* convert phys addr to tlb insert format */ depd %r25, 63,22, %r28 /* Form aliased virtual address 'to' */ depdi 0, 63,12, %r28 /* Clear any offset bits */ @@ -824,7 +829,7 @@ flush_alias_page: ldil L%dcache_stride, %r1 ldw R%dcache_stride(%r1), %r23 -#ifdef __LP64__ +#ifdef CONFIG_64BIT depdi,z 1, 63-PAGE_SHIFT,1, %r29 #else depwi,z 1, 31-PAGE_SHIFT,1, %r29 @@ -935,7 +940,7 @@ flush_kernel_icache_page: ldil L%icache_stride, %r1 ldw R%icache_stride(%r1), %r23 -#ifdef __LP64__ +#ifdef CONFIG_64BIT depdi,z 1, 63-PAGE_SHIFT,1, %r25 #else depwi,z 1, 31-PAGE_SHIFT,1, %r25 @@ -944,23 +949,23 @@ flush_kernel_icache_page: sub %r25, %r23, %r25 -1: fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) +1: fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) CMPB<< %r26, %r25, 1b - fic,m %r23(%r26) + fic,m %r23(%sr4, %r26) sync bv %r0(%r2) @@ -982,17 +987,18 @@ flush_kernel_icache_range_asm: ANDCM %r26, %r21, %r26 1: CMPB<<,n %r26, %r25, 1b - fic,m %r23(%r26) + fic,m %r23(%sr4, %r26) sync bv %r0(%r2) nop .exit - .procend - .align 128 - + /* align should cover use of rfi in disable_sr_hashing_asm and + * srdis_done. + */ + .align 256 .export disable_sr_hashing_asm,code disable_sr_hashing_asm: @@ -1000,28 +1006,26 @@ disable_sr_hashing_asm: .callinfo NO_CALLS .entry - /* Switch to real mode */ - - ssm 0, %r0 /* relied upon translation! */ - nop - nop + /* + * Switch to real mode + */ + /* pcxt_ssm_bug */ + rsm PSW_SM_I, %r0 + load32 PA(1f), %r1 nop nop nop nop nop - - rsm (PSW_SM_Q|PSW_SM_I), %r0 /* disable Q&I to load the iia queue */ - ldil L%REAL_MODE_PSW, %r1 - ldo R%REAL_MODE_PSW(%r1), %r1 - mtctl %r1, %cr22 + + rsm PSW_SM_Q, %r0 /* prep to load iia queue */ mtctl %r0, %cr17 /* Clear IIASQ tail */ mtctl %r0, %cr17 /* Clear IIASQ head */ - ldil L%PA(1f), %r1 - ldo R%PA(1f)(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ head */ ldo 4(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ tail */ + load32 REAL_MODE_PSW, %r1 + mtctl %r1, %ipsw rfi nop @@ -1053,27 +1057,31 @@ srdis_pcxl: srdis_pa20: - /* Disable Space Register Hashing for PCXU,PCXU+,PCXW,PCXW+ */ + /* Disable Space Register Hashing for PCXU,PCXU+,PCXW,PCXW+,PCXW2 */ .word 0x144008bc /* mfdiag %dr2, %r28 */ depdi 0, 54,1, %r28 /* clear DIAG_SPHASH_ENAB (bit 54) */ .word 0x145c1840 /* mtdiag %r28, %dr2 */ -srdis_done: +srdis_done: /* Switch back to virtual mode */ + rsm PSW_SM_I, %r0 /* prep to load iia queue */ + load32 2f, %r1 + nop + nop + nop + nop + nop - rsm PSW_SM_Q, %r0 /* clear Q bit to load iia queue */ - ldil L%KERNEL_PSW, %r1 - ldo R%KERNEL_PSW(%r1), %r1 - mtctl %r1, %cr22 + rsm PSW_SM_Q, %r0 /* prep to load iia queue */ mtctl %r0, %cr17 /* Clear IIASQ tail */ mtctl %r0, %cr17 /* Clear IIASQ head */ - ldil L%(2f), %r1 - ldo R%(2f)(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ head */ ldo 4(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ tail */ + load32 KERNEL_PSW, %r1 + mtctl %r1, %ipsw rfi nop diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c index 368cc095c99f..f94a02ef3d95 100644 --- a/arch/parisc/kernel/pci-dma.c +++ b/arch/parisc/kernel/pci-dma.c @@ -31,7 +31,7 @@ #include <asm/page.h> /* get_order */ #include <asm/pgalloc.h> #include <asm/uaccess.h> - +#include <asm/tlbflush.h> /* for purge_tlb_*() macros */ static struct proc_dir_entry * proc_gsc_root = NULL; static int pcxl_proc_info(char *buffer, char **start, off_t offset, int length); @@ -114,7 +114,7 @@ static inline int map_pmd_uncached(pmd_t * pmd, unsigned long vaddr, if (end > PGDIR_SIZE) end = PGDIR_SIZE; do { - pte_t * pte = pte_alloc_kernel(&init_mm, pmd, vaddr); + pte_t * pte = pte_alloc_kernel(pmd, vaddr); if (!pte) return -ENOMEM; if (map_pte_uncached(pte, orig_vaddr, end - vaddr, paddr_ptr)) @@ -333,23 +333,33 @@ pcxl_free_range(unsigned long vaddr, size_t size) static int __init pcxl_dma_init(void) { - if (pcxl_dma_start == 0) - return 0; + if (pcxl_dma_start == 0) + return 0; - spin_lock_init(&pcxl_res_lock); - pcxl_res_size = PCXL_DMA_MAP_SIZE >> (PAGE_SHIFT + 3); - pcxl_res_hint = 0; - pcxl_res_map = (char *)__get_free_pages(GFP_KERNEL, + spin_lock_init(&pcxl_res_lock); + pcxl_res_size = PCXL_DMA_MAP_SIZE >> (PAGE_SHIFT + 3); + pcxl_res_hint = 0; + pcxl_res_map = (char *)__get_free_pages(GFP_KERNEL, get_order(pcxl_res_size)); - memset(pcxl_res_map, 0, pcxl_res_size); - proc_gsc_root = proc_mkdir("gsc", 0); - create_proc_info_entry("dino", 0, proc_gsc_root, pcxl_proc_info); - return 0; + memset(pcxl_res_map, 0, pcxl_res_size); + proc_gsc_root = proc_mkdir("gsc", 0); + if (!proc_gsc_root) + printk(KERN_WARNING + "pcxl_dma_init: Unable to create gsc /proc dir entry\n"); + else { + struct proc_dir_entry* ent; + ent = create_proc_info_entry("pcxl_dma", 0, + proc_gsc_root, pcxl_proc_info); + if (!ent) + printk(KERN_WARNING + "pci-dma.c: Unable to create pcxl_dma /proc entry.\n"); + } + return 0; } __initcall(pcxl_dma_init); -static void * pa11_dma_alloc_consistent (struct device *dev, size_t size, dma_addr_t *dma_handle, int flag) +static void * pa11_dma_alloc_consistent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flag) { unsigned long vaddr; unsigned long paddr; @@ -502,13 +512,13 @@ struct hppa_dma_ops pcxl_dma_ops = { }; static void *fail_alloc_consistent(struct device *dev, size_t size, - dma_addr_t *dma_handle, int flag) + dma_addr_t *dma_handle, gfp_t flag) { return NULL; } static void *pa11_dma_alloc_noncoherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, int flag) + dma_addr_t *dma_handle, gfp_t flag) { void *addr = NULL; @@ -545,16 +555,16 @@ struct hppa_dma_ops pcx_dma_ops = { static int pcxl_proc_info(char *buf, char **start, off_t offset, int len) { +#if 0 u_long i = 0; unsigned long *res_ptr = (u_long *)pcxl_res_map; - unsigned long total_pages = pcxl_res_size << 3; /* 8 bits per byte */ +#endif + unsigned long total_pages = pcxl_res_size << 3; /* 8 bits per byte */ - sprintf(buf, "\nDMA Mapping Area size : %d bytes (%d pages)\n", - PCXL_DMA_MAP_SIZE, - (pcxl_res_size << 3) ); /* 1 bit per page */ + sprintf(buf, "\nDMA Mapping Area size : %d bytes (%ld pages)\n", + PCXL_DMA_MAP_SIZE, total_pages); - sprintf(buf, "%sResource bitmap : %d bytes (%d pages)\n", - buf, pcxl_res_size, pcxl_res_size << 3); /* 8 bits per byte */ + sprintf(buf, "%sResource bitmap : %d bytes\n", buf, pcxl_res_size); strcat(buf, " total: free: used: % used:\n"); sprintf(buf, "%sblocks %8d %8ld %8ld %8ld%%\n", buf, pcxl_res_size, @@ -564,7 +574,8 @@ static int pcxl_proc_info(char *buf, char **start, off_t offset, int len) sprintf(buf, "%spages %8ld %8ld %8ld %8ld%%\n", buf, total_pages, total_pages - pcxl_used_pages, pcxl_used_pages, (pcxl_used_pages * 100 / total_pages)); - + +#if 0 strcat(buf, "\nResource bitmap:"); for(; i < (pcxl_res_size / sizeof(u_long)); ++i, ++res_ptr) { @@ -572,6 +583,7 @@ static int pcxl_proc_info(char *buf, char **start, off_t offset, int len) strcat(buf,"\n "); sprintf(buf, "%s %08lx", buf, *res_ptr); } +#endif strcat(buf, "\n"); return strlen(buf); } diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c index e6a891a0cad0..88cba49c5301 100644 --- a/arch/parisc/kernel/pci.c +++ b/arch/parisc/kernel/pci.c @@ -202,7 +202,8 @@ static void pcibios_link_hba_resources( struct resource *hba_res, struct resource *r) { if (!r->parent) { - printk(KERN_EMERG "PCI: Tell willy he's wrong\n"); + printk(KERN_EMERG "PCI: resource not parented! [%lx-%lx]\n", + r->start, r->end); r->parent = hba_res; /* reverse link is harder *sigh* */ diff --git a/arch/parisc/kernel/pdc_cons.c b/arch/parisc/kernel/pdc_cons.c index 01f676d1673b..215d78c87bc5 100644 --- a/arch/parisc/kernel/pdc_cons.c +++ b/arch/parisc/kernel/pdc_cons.c @@ -41,7 +41,7 @@ /* Define EARLY_BOOTUP_DEBUG to debug kernel related boot problems. * On production kernels EARLY_BOOTUP_DEBUG should be undefined. */ -#undef EARLY_BOOTUP_DEBUG +#define EARLY_BOOTUP_DEBUG #include <linux/config.h> @@ -49,14 +49,8 @@ #include <linux/console.h> #include <linux/string.h> #include <linux/init.h> -#include <linux/delay.h> -#include <linux/sched.h> -#include <linux/interrupt.h> #include <linux/major.h> #include <linux/tty.h> -#include <asm/page.h> -#include <asm/types.h> -#include <asm/system.h> #include <asm/pdc.h> /* for iodc_call() proto and friends */ @@ -96,7 +90,6 @@ static int pdc_console_setup(struct console *co, char *options) } #if defined(CONFIG_PDC_CONSOLE) -#define PDC_CONSOLE_DEVICE pdc_console_device static struct tty_driver * pdc_console_device (struct console *c, int *index) { extern struct tty_driver console_driver; @@ -104,22 +97,19 @@ static struct tty_driver * pdc_console_device (struct console *c, int *index) return &console_driver; } #else -#define PDC_CONSOLE_DEVICE NULL +#define pdc_console_device NULL #endif static struct console pdc_cons = { .name = "ttyB", .write = pdc_console_write, - .device = PDC_CONSOLE_DEVICE, + .device = pdc_console_device, .setup = pdc_console_setup, - .flags = CON_BOOT|CON_PRINTBUFFER|CON_ENABLED, + .flags = CON_BOOT | CON_PRINTBUFFER | CON_ENABLED, .index = -1, }; static int pdc_console_initialized; -extern unsigned long con_start; /* kernel/printk.c */ -extern unsigned long log_end; /* kernel/printk.c */ - static void pdc_console_init_force(void) { @@ -146,27 +136,11 @@ void __init pdc_console_init(void) } -/* Unregister the pdc console with the printk console layer */ -void pdc_console_die(void) -{ - if (!pdc_console_initialized) - return; - --pdc_console_initialized; - - printk(KERN_INFO "Switching from PDC console\n"); - - /* Don't repeat what we've already printed */ - con_start = log_end; - - unregister_console(&pdc_cons); -} - - /* * Used for emergencies. Currently only used if an HPMC occurs. If an * HPMC occurs, it is possible that the current console may not be - * properly initialed after the PDC IO reset. This routine unregisters all - * of the current consoles, reinitializes the pdc console and + * properly initialised after the PDC IO reset. This routine unregisters + * all of the current consoles, reinitializes the pdc console and * registers it. */ @@ -177,13 +151,13 @@ void pdc_console_restart(void) if (pdc_console_initialized) return; + /* If we've already seen the output, don't bother to print it again */ + if (console_drivers != NULL) + pdc_cons.flags &= ~CON_PRINTBUFFER; + while ((console = console_drivers) != NULL) unregister_console(console_drivers); - /* Don't repeat what we've already printed */ - con_start = log_end; - /* force registering the pdc console */ pdc_console_init_force(); } - diff --git a/arch/parisc/kernel/perf.c b/arch/parisc/kernel/perf.c index b3ad0a505b87..44670d6e06f4 100644 --- a/arch/parisc/kernel/perf.c +++ b/arch/parisc/kernel/perf.c @@ -746,7 +746,8 @@ static int perf_write_image(uint64_t *memaddr) uint64_t *bptr; uint32_t dwords; uint32_t *intrigue_rdr; - uint64_t *intrigue_bitmask, tmp64, proc_hpa; + uint64_t *intrigue_bitmask, tmp64; + void __iomem *runway; struct rdr_tbl_ent *tentry; int i; @@ -798,15 +799,16 @@ static int perf_write_image(uint64_t *memaddr) return -1; } - proc_hpa = cpu_device->hpa; + runway = ioremap(cpu_device->hpa.start, 4096); /* Merge intrigue bits into Runway STATUS 0 */ - tmp64 = __raw_readq(proc_hpa + RUNWAY_STATUS) & 0xffecfffffffffffful; - __raw_writeq(tmp64 | (*memaddr++ & 0x0013000000000000ul), proc_hpa + RUNWAY_STATUS); + tmp64 = __raw_readq(runway + RUNWAY_STATUS) & 0xffecfffffffffffful; + __raw_writeq(tmp64 | (*memaddr++ & 0x0013000000000000ul), + runway + RUNWAY_STATUS); /* Write RUNWAY DEBUG registers */ for (i = 0; i < 8; i++) { - __raw_writeq(*memaddr++, proc_hpa + RUNWAY_DEBUG + i); + __raw_writeq(*memaddr++, runway + RUNWAY_DEBUG); } return 0; diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c index 46b759385115..7fdca87ef647 100644 --- a/arch/parisc/kernel/process.c +++ b/arch/parisc/kernel/process.c @@ -9,7 +9,7 @@ * Copyright (C) 2000-2003 Paul Bame <bame at parisc-linux.org> * Copyright (C) 2000 Philipp Rumpf <prumpf with tux.org> * Copyright (C) 2000 David Kennedy <dkennedy with linuxcare.com> - * Copyright (C) 2000 Richard Hirst <rhirst with parisc-lixux.org> + * Copyright (C) 2000 Richard Hirst <rhirst with parisc-linux.org> * Copyright (C) 2000 Grant Grundler <grundler with parisc-linux.org> * Copyright (C) 2001 Alan Modra <amodra at parisc-linux.org> * Copyright (C) 2001-2002 Ryan Bradetich <rbrad at parisc-linux.org> @@ -245,7 +245,17 @@ int sys_clone(unsigned long clone_flags, unsigned long usp, struct pt_regs *regs) { - int __user *user_tid = (int __user *)regs->gr[26]; + /* Arugments from userspace are: + r26 = Clone flags. + r25 = Child stack. + r24 = parent_tidptr. + r23 = Is the TLS storage descriptor + r22 = child_tidptr + + However, these last 3 args are only examined + if the proper flags are set. */ + int __user *child_tidptr; + int __user *parent_tidptr; /* usp must be word aligned. This also prevents users from * passing in the value 1 (which is the signal for a special @@ -253,10 +263,20 @@ sys_clone(unsigned long clone_flags, unsigned long usp, usp = ALIGN(usp, 4); /* A zero value for usp means use the current stack */ - if(usp == 0) - usp = regs->gr[30]; + if (usp == 0) + usp = regs->gr[30]; - return do_fork(clone_flags, usp, regs, 0, user_tid, NULL); + if (clone_flags & CLONE_PARENT_SETTID) + parent_tidptr = (int __user *)regs->gr[24]; + else + parent_tidptr = NULL; + + if (clone_flags & (CLONE_CHILD_SETTID | CLONE_CHILD_CLEARTID)) + child_tidptr = (int __user *)regs->gr[22]; + else + child_tidptr = NULL; + + return do_fork(clone_flags, usp, regs, 0, parent_tidptr, child_tidptr); } int @@ -332,6 +352,10 @@ copy_thread(int nr, unsigned long clone_flags, unsigned long usp, } else { cregs->kpc = (unsigned long) &child_return; } + /* Setup thread TLS area from the 4th parameter in clone */ + if (clone_flags & CLONE_SETTLS) + cregs->cr27 = pregs->gr[23]; + } return 0; diff --git a/arch/parisc/kernel/processor.c b/arch/parisc/kernel/processor.c index 13b721cb9f55..4f5bbcf1f5a4 100644 --- a/arch/parisc/kernel/processor.c +++ b/arch/parisc/kernel/processor.c @@ -92,7 +92,7 @@ static int __init processor_probe(struct parisc_device *dev) * May get overwritten by PAT code. */ cpuid = boot_cpu_data.cpu_count; - txn_addr = dev->hpa; /* for legacy PDC */ + txn_addr = dev->hpa.start; /* for legacy PDC */ #ifdef __LP64__ if (is_pdc_pat()) { @@ -122,7 +122,7 @@ static int __init processor_probe(struct parisc_device *dev) * boot time (ie shutdown a CPU from an OS perspective). */ /* get the cpu number */ - status = pdc_pat_cpu_get_number(&cpu_info, dev->hpa); + status = pdc_pat_cpu_get_number(&cpu_info, dev->hpa.start); BUG_ON(PDC_OK != status); @@ -130,7 +130,7 @@ static int __init processor_probe(struct parisc_device *dev) printk(KERN_WARNING "IGNORING CPU at 0x%x," " cpu_slot_id > NR_CPUS" " (%ld > %d)\n", - dev->hpa, cpu_info.cpu_num, NR_CPUS); + dev->hpa.start, cpu_info.cpu_num, NR_CPUS); /* Ignore CPU since it will only crash */ boot_cpu_data.cpu_count--; return 1; @@ -149,7 +149,7 @@ static int __init processor_probe(struct parisc_device *dev) p->loops_per_jiffy = loops_per_jiffy; p->dev = dev; /* Save IODC data in case we need it */ - p->hpa = dev->hpa; /* save CPU hpa */ + p->hpa = dev->hpa.start; /* save CPU hpa */ p->cpuid = cpuid; /* save CPU id */ p->txn_addr = txn_addr; /* save CPU IRQ address */ #ifdef CONFIG_SMP diff --git a/arch/parisc/kernel/ptrace.c b/arch/parisc/kernel/ptrace.c index f3428e5e86fb..18130c3748f3 100644 --- a/arch/parisc/kernel/ptrace.c +++ b/arch/parisc/kernel/ptrace.c @@ -78,7 +78,7 @@ void ptrace_disable(struct task_struct *child) pa_psw(child)->l = 0; } -long sys_ptrace(long request, pid_t pid, long addr, long data) +long sys_ptrace(long request, long pid, long addr, long data) { struct task_struct *child; long ret; diff --git a/arch/parisc/kernel/real2.S b/arch/parisc/kernel/real2.S index 8dd5defb7316..8c2859cca77e 100644 --- a/arch/parisc/kernel/real2.S +++ b/arch/parisc/kernel/real2.S @@ -7,8 +7,10 @@ * Copyright (C) 2000 Hewlett Packard (Paul Bame bame@puffin.external.hp.com) * */ -#include <asm/assembly.h> +#include <linux/config.h> + #include <asm/psw.h> +#include <asm/assembly.h> .section .bss .export real_stack @@ -20,7 +22,7 @@ real32_stack: real64_stack: .block 8192 -#ifdef __LP64__ +#ifdef CONFIG_64BIT # define REG_SZ 8 #else # define REG_SZ 4 @@ -50,7 +52,7 @@ save_cr_end: real32_call_asm: STREG %rp, -RP_OFFSET(%sp) /* save RP */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT callee_save ldo 2*REG_SZ(%sp), %sp /* room for a couple more saves */ STREG %r27, -1*REG_SZ(%sp) @@ -77,7 +79,7 @@ real32_call_asm: b,l save_control_regs,%r2 /* modifies r1, r2, r28 */ nop -#ifdef __LP64__ +#ifdef CONFIG_64BIT rsm PSW_SM_W, %r0 /* go narrow */ #endif @@ -85,7 +87,7 @@ real32_call_asm: bv 0(%r31) nop ric_ret: -#ifdef __LP64__ +#ifdef CONFIG_64BIT ssm PSW_SM_W, %r0 /* go wide */ #endif /* restore CRs before going virtual in case we page fault */ @@ -97,7 +99,7 @@ ric_ret: tovirt_r1 %sp LDREG -REG_SZ(%sp), %sp /* restore SP */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT LDREG -1*REG_SZ(%sp), %r27 LDREG -2*REG_SZ(%sp), %r29 ldo -2*REG_SZ(%sp), %sp @@ -143,24 +145,21 @@ restore_control_regs: /* rfi_virt2real() and rfi_real2virt() could perhaps be adapted for * more general-purpose use by the several places which need RFIs */ - .align 128 .text + .align 128 rfi_virt2real: /* switch to real mode... */ - ssm 0,0 /* See "relied upon translation" */ - nop /* PA 2.0 Arch. F-5 */ - nop - nop + rsm PSW_SM_I,%r0 + load32 PA(rfi_v2r_1), %r1 nop nop nop nop nop - rsm (PSW_SM_Q|PSW_SM_I),%r0 /* disable Q & I bits to load iia queue */ + rsm PSW_SM_Q,%r0 /* disable Q & I bits to load iia queue */ mtctl %r0, %cr17 /* Clear IIASQ tail */ mtctl %r0, %cr17 /* Clear IIASQ head */ - load32 PA(rfi_v2r_1), %r1 mtctl %r1, %cr18 /* IIAOQ head */ ldo 4(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ tail */ @@ -184,10 +183,8 @@ rfi_v2r_1: .text .align 128 rfi_real2virt: - ssm 0,0 /* See "relied upon translation" */ - nop /* PA 2.0 Arch. F-5 */ - nop - nop + rsm PSW_SM_I,%r0 + load32 (rfi_r2v_1), %r1 nop nop nop @@ -197,7 +194,6 @@ rfi_real2virt: rsm PSW_SM_Q,%r0 /* disable Q bit to load iia queue */ mtctl %r0, %cr17 /* Clear IIASQ tail */ mtctl %r0, %cr17 /* Clear IIASQ head */ - load32 (rfi_r2v_1), %r1 mtctl %r1, %cr18 /* IIAOQ head */ ldo 4(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ tail */ @@ -218,7 +214,7 @@ rfi_r2v_1: bv 0(%r2) nop -#ifdef __LP64__ +#ifdef CONFIG_64BIT /************************ 64-bit real-mode calls ***********************/ /* This is only usable in wide kernels right now and will probably stay so */ @@ -296,7 +292,7 @@ pc_in_user_space: ** comparing function pointers. */ __canonicalize_funcptr_for_compare: -#ifdef __LP64__ +#ifdef CONFIG_64BIT bve (%r2) #else bv %r0(%r2) diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c index 0224651fd8f1..82c24e62ab63 100644 --- a/arch/parisc/kernel/signal.c +++ b/arch/parisc/kernel/signal.c @@ -490,15 +490,7 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, give_sigsegv: DBG(1,"setup_rt_frame: sending SIGSEGV\n"); - if (sig == SIGSEGV) - ka->sa.sa_handler = SIG_DFL; - si.si_signo = SIGSEGV; - si.si_errno = 0; - si.si_code = SI_KERNEL; - si.si_pid = current->pid; - si.si_uid = current->uid; - si.si_addr = frame; - force_sig_info(SIGSEGV, &si, current); + force_sigsegv(sig, current); return 0; } @@ -633,10 +625,14 @@ do_signal(sigset_t *oldset, struct pt_regs *regs, int in_syscall) put_user(0xe0008200, &usp[3]); put_user(0x34140000, &usp[4]); - /* Stack is 64-byte aligned, and we only - * need to flush 1 cache line */ - asm("fdc 0(%%sr3, %0)\n" - "fic 0(%%sr3, %0)\n" + /* Stack is 64-byte aligned, and we only need + * to flush 1 cache line. + * Flushing one cacheline is cheap. + * "sync" on bigger (> 4 way) boxes is not. + */ + asm("fdc %%r0(%%sr3, %0)\n" + "sync\n" + "fic %%r0(%%sr3, %0)\n" "sync\n" : : "r"(regs->gr[30])); diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c index bcc7e83f5142..5db3be4e2704 100644 --- a/arch/parisc/kernel/smp.c +++ b/arch/parisc/kernel/smp.c @@ -18,7 +18,7 @@ */ #undef ENTRY_SYS_CPUS /* syscall support for iCOD-like functionality */ -#include <linux/autoconf.h> +#include <linux/config.h> #include <linux/types.h> #include <linux/spinlock.h> diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S index 8c7a7185cd3b..b29b76b42bb7 100644 --- a/arch/parisc/kernel/syscall.S +++ b/arch/parisc/kernel/syscall.S @@ -6,6 +6,7 @@ * thanks to Philipp Rumpf, Mike Shaver and various others * sorry about the wall, puffin.. */ +#include <linux/config.h> /* for CONFIG_SMP */ #include <asm/asm-offsets.h> #include <asm/unistd.h> @@ -22,15 +23,13 @@ */ #define KILL_INSN break 0,0 -#include <linux/config.h> /* for CONFIG_SMP */ - -#ifdef __LP64__ +#ifdef CONFIG_64BIT .level 2.0w #else .level 1.1 #endif -#ifndef __LP64__ +#ifndef CONFIG_64BIT .macro fixup_branch,lbl b \lbl .endm @@ -103,7 +102,7 @@ linux_gateway_entry: mfsp %sr7,%r1 /* save user sr7 */ mtsp %r1,%sr3 /* and store it in sr3 */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* for now we can *always* set the W bit on entry to the syscall * since we don't support wide userland processes. We could * also save the current SM other than in r0 and restore it on @@ -155,7 +154,7 @@ linux_gateway_entry: STREG %r19, TASK_PT_GR19(%r1) LDREGM -FRAME_SIZE(%r30), %r2 /* get users sp back */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT extrd,u %r2,63,1,%r19 /* W hidden in bottom bit */ #if 0 xor %r19,%r2,%r2 /* clear bottom bit */ @@ -186,7 +185,7 @@ linux_gateway_entry: loadgp -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ copy %r19,%r2 /* W bit back to r2 */ #else @@ -205,7 +204,7 @@ linux_gateway_entry: /* Note! We cannot use the syscall table that is mapped nearby since the gateway page is mapped execute-only. */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldil L%sys_call_table, %r1 or,= %r2,%r2,%r2 addil L%(sys_call_table64-sys_call_table), %r1 @@ -321,7 +320,7 @@ tracesys_next: LDREG TASK_PT_GR25(%r1), %r25 LDREG TASK_PT_GR24(%r1), %r24 LDREG TASK_PT_GR23(%r1), %r23 -#ifdef __LP64__ +#ifdef CONFIG_64BIT LDREG TASK_PT_GR22(%r1), %r22 LDREG TASK_PT_GR21(%r1), %r21 ldo -16(%r30),%r29 /* Reference param save area */ @@ -350,7 +349,7 @@ tracesys_next: tracesys_exit: ldo -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 /* get task ptr */ LDREG TI_TASK(%r1), %r1 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif bl syscall_trace, %r2 @@ -371,7 +370,7 @@ tracesys_exit: tracesys_sigexit: ldo -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 /* get task ptr */ LDREG 0(%r1), %r1 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif bl syscall_trace, %r2 @@ -404,7 +403,7 @@ lws_start: gate .+8, %r0 depi 3, 31, 2, %r31 /* Ensure we return to userspace */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* FIXME: If we are a 64-bit kernel just * turn this on unconditionally. */ @@ -440,7 +439,7 @@ lws_exit_nosys: /* Fall through: Return to userspace */ lws_exit: -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* decide whether to reset the wide mode bit * * For a syscall, the W bit is stored in the lowest bit @@ -486,7 +485,7 @@ lws_exit: /* ELF64 Process entry path */ lws_compare_and_swap64: -#ifdef __LP64__ +#ifdef CONFIG_64BIT b,n lws_compare_and_swap #else /* If we are not a 64-bit kernel, then we don't @@ -497,7 +496,7 @@ lws_compare_and_swap64: /* ELF32 Process entry path */ lws_compare_and_swap32: -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* Clip all the input registers */ depdi 0, 31, 32, %r26 depdi 0, 31, 32, %r25 @@ -608,7 +607,7 @@ cas_action: the other for the store. Either return -EFAULT. Each of the entries must be relocated. */ .section __ex_table,"aw" -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* Pad the address calculation */ .word 0,(2b - linux_gateway_page) .word 0,(3b - linux_gateway_page) @@ -619,7 +618,7 @@ cas_action: .previous .section __ex_table,"aw" -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* Pad the address calculation */ .word 0,(1b - linux_gateway_page) .word 0,(3b - linux_gateway_page) @@ -638,7 +637,7 @@ end_linux_gateway_page: /* Relocate symbols assuming linux_gateway_page is mapped to virtual address 0x0 */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* FIXME: The code will always be on the gateay page and thus it will be on the first 4k, the assembler seems to think that the final @@ -666,7 +665,7 @@ lws_table: sys_call_table: #include "syscall_table.S" -#ifdef __LP64__ +#ifdef CONFIG_64BIT .align 4096 .export sys_call_table64 .Lsys_call_table64: diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S index dcfa4d3d0e7d..32cbc0489324 100644 --- a/arch/parisc/kernel/syscall_table.S +++ b/arch/parisc/kernel/syscall_table.S @@ -35,7 +35,7 @@ #undef ENTRY_UHOH #undef ENTRY_COMP #undef ENTRY_OURS -#if defined(__LP64__) && !defined(SYSCALL_TABLE_64BIT) +#if defined(CONFIG_64BIT) && !defined(SYSCALL_TABLE_64BIT) /* Use ENTRY_SAME for 32-bit syscalls which are the same on wide and * narrow palinux. Use ENTRY_DIFF for those where a 32-bit specific * implementation is required on wide palinux. Use ENTRY_COMP where @@ -46,7 +46,7 @@ #define ENTRY_UHOH(_name_) .dword sys32_##unimplemented #define ENTRY_OURS(_name_) .dword parisc_##_name_ #define ENTRY_COMP(_name_) .dword compat_sys_##_name_ -#elif defined(__LP64__) && defined(SYSCALL_TABLE_64BIT) +#elif defined(CONFIG_64BIT) && defined(SYSCALL_TABLE_64BIT) #define ENTRY_SAME(_name_) .dword sys_##_name_ #define ENTRY_DIFF(_name_) .dword sys_##_name_ #define ENTRY_UHOH(_name_) .dword sys_##_name_ @@ -368,5 +368,11 @@ ENTRY_COMP(mbind) /* 260 */ ENTRY_COMP(get_mempolicy) ENTRY_COMP(set_mempolicy) + ENTRY_SAME(ni_syscall) /* 263: reserved for vserver */ + ENTRY_SAME(add_key) + ENTRY_SAME(request_key) /* 265 */ + ENTRY_SAME(keyctl) + ENTRY_SAME(ioprio_set) + ENTRY_SAME(ioprio_get) /* Nothing yet */ diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c index 7ff67f8e9f8c..cded25680787 100644 --- a/arch/parisc/kernel/time.c +++ b/arch/parisc/kernel/time.c @@ -33,10 +33,6 @@ #include <linux/timex.h> -u64 jiffies_64 = INITIAL_JIFFIES; - -EXPORT_SYMBOL(jiffies_64); - /* xtime and wall_jiffies keep wall-clock time */ extern unsigned long wall_jiffies; @@ -89,14 +85,6 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) } } -#ifdef CONFIG_CHASSIS_LCD_LED - /* Only schedule the led tasklet on cpu 0, and only if it - * is enabled. - */ - if (cpu == 0 && !atomic_read(&led_tasklet.count)) - tasklet_schedule(&led_tasklet); -#endif - /* check soft power switch status */ if (cpu == 0 && !atomic_read(&power_tasklet.count)) tasklet_schedule(&power_tasklet); @@ -104,6 +92,24 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) return IRQ_HANDLED; } + +unsigned long profile_pc(struct pt_regs *regs) +{ + unsigned long pc = instruction_pointer(regs); + + if (regs->gr[0] & PSW_N) + pc -= 4; + +#ifdef CONFIG_SMP + if (in_lock_functions(pc)) + pc = regs->gr[2]; +#endif + + return pc; +} +EXPORT_SYMBOL(profile_pc); + + /*** converted from ia64 ***/ /* * Return the number of micro-seconds that elapsed since the last diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c index d2e5b229a2f4..15914f0235a0 100644 --- a/arch/parisc/kernel/traps.c +++ b/arch/parisc/kernel/traps.c @@ -74,7 +74,10 @@ void show_regs(struct pt_regs *regs) char *level; unsigned long cr30; unsigned long cr31; - + /* carlos says that gcc understands better memory in a struct, + * and it makes our life easier with fpregs -- T-Bone */ + struct { u32 sw[2]; } s; + level = user_mode(regs) ? KERN_DEBUG : KERN_CRIT; printk("%s\n", level); /* don't want to have that pretty register dump messed up */ @@ -103,11 +106,33 @@ void show_regs(struct pt_regs *regs) printk("%s\n", buf); } -#if RIDICULOUSLY_VERBOSE - for (i = 0; i < 32; i += 2) - printk("%sFR%02d : %016lx FR%2d : %016lx", level, i, - regs->fr[i], i+1, regs->fr[i+1]); -#endif + /* FR are 64bit everywhere. Need to use asm to get the content + * of fpsr/fper1, and we assume that we won't have a FP Identify + * in our way, otherwise we're screwed. + * The fldd is used to restore the T-bit if there was one, as the + * store clears it anyway. + * BTW, PA2.0 book says "thou shall not use fstw on FPSR/FPERs". */ + __asm__ ( + "fstd %%fr0,0(%1) \n\t" + "fldd 0(%1),%%fr0 \n\t" + : "=m" (s) : "r" (&s) : "%r0" + ); + + printk("%s\n", level); + printk("%s VZOUICununcqcqcqcqcqcrmunTDVZOUI\n", level); + printbinary(buf, s.sw[0], 32); + printk("%sFPSR: %s\n", level, buf); + printk("%sFPER1: %08x\n", level, s.sw[1]); + + /* here we'll print fr0 again, tho it'll be meaningless */ + for (i = 0; i < 32; i += 4) { + int j; + p = buf; + p += sprintf(p, "%sfr%02d-%02d ", level, i, i + 3); + for (j = 0; j < 4; j++) + p += sprintf(p, " %016llx", (i+j) == 0 ? 0 : regs->fr[i+j]); + printk("%s\n", buf); + } cr30 = mfctl(30); cr31 = mfctl(31); diff --git a/arch/parisc/kernel/unaligned.c b/arch/parisc/kernel/unaligned.c index 62eea35bcd69..eaae8a021f9f 100644 --- a/arch/parisc/kernel/unaligned.c +++ b/arch/parisc/kernel/unaligned.c @@ -513,15 +513,18 @@ void handle_unaligned(struct pt_regs *regs) register int flop=0; /* true if this is a flop */ /* log a message with pacing */ - if (user_mode(regs)) - { - if (unaligned_count > 5 && jiffies - last_time > 5*HZ) - { + if (user_mode(regs)) { + if (current->thread.flags & PARISC_UAC_SIGBUS) { + goto force_sigbus; + } + + if (unaligned_count > 5 && jiffies - last_time > 5*HZ) { unaligned_count = 0; last_time = jiffies; } - if (++unaligned_count < 5) - { + + if (!(current->thread.flags & PARISC_UAC_NOPRINT) + && ++unaligned_count < 5) { char buf[256]; sprintf(buf, "%s(%d): unaligned access to 0x" RFMT " at ip=0x" RFMT "\n", current->comm, current->pid, regs->ior, regs->iaoq[0]); @@ -530,6 +533,7 @@ void handle_unaligned(struct pt_regs *regs) show_regs(regs); #endif } + if (!unaligned_enabled) goto force_sigbus; } diff --git a/arch/parisc/lib/fixup.S b/arch/parisc/lib/fixup.S index 1b91612ed964..e0661c2978ed 100644 --- a/arch/parisc/lib/fixup.S +++ b/arch/parisc/lib/fixup.S @@ -35,7 +35,7 @@ extrd,u \t2,63,32,\t2 #endif /* t2 = &__per_cpu_offset[smp_processor_id()]; */ - LDREG,s \t2(\t1),\t2 + LDREGX \t2(\t1),\t2 addil LT%per_cpu__exception_data,%r27 LDREG RT%per_cpu__exception_data(%r1),\t1 /* t1 = &__get_cpu_var(exception_data) */ @@ -53,6 +53,8 @@ .endm #endif + .level LEVEL + .text .section .fixup, "ax" diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c index feb1b9f42c2b..b7098035321f 100644 --- a/arch/parisc/lib/memcpy.c +++ b/arch/parisc/lib/memcpy.c @@ -339,6 +339,7 @@ unsigned long pa_memcpy(void *dstp, const void *srcp, unsigned long len) pds = (double *)pcs; pdd = (double *)pcd; +#if 0 /* Copy 8 doubles at a time */ while (len >= 8*sizeof(double)) { register double r1, r2, r3, r4, r5, r6, r7, r8; @@ -366,6 +367,7 @@ unsigned long pa_memcpy(void *dstp, const void *srcp, unsigned long len) fstdma(d_space, r8, pdd, pmc_store_exc); len -= 8*sizeof(double); } +#endif pws = (unsigned int *)pds; pwd = (unsigned int *)pdd; diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index 2886ad70db48..29b998e430e6 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -505,7 +505,9 @@ void show_mem(void) for (j = node_start_pfn(i); j < node_end_pfn(i); j++) { struct page *p; + unsigned long flags; + pgdat_resize_lock(NODE_DATA(i), &flags); p = nid_page_nr(i, j) - node_start_pfn(i); total++; @@ -517,6 +519,7 @@ void show_mem(void) free++; else shared += page_count(p) - 1; + pgdat_resize_unlock(NODE_DATA(i), &flags); } } #endif diff --git a/arch/parisc/mm/ioremap.c b/arch/parisc/mm/ioremap.c index f2df502cdae3..5c7a1b3b9326 100644 --- a/arch/parisc/mm/ioremap.c +++ b/arch/parisc/mm/ioremap.c @@ -52,7 +52,7 @@ static inline int remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned lo if (address >= end) BUG(); do { - pte_t * pte = pte_alloc_kernel(NULL, pmd, address); + pte_t * pte = pte_alloc_kernel(pmd, address); if (!pte) return -ENOMEM; remap_area_pte(pte, address, end - address, address + phys_addr, flags); @@ -75,10 +75,9 @@ static int remap_area_pages(unsigned long address, unsigned long phys_addr, flush_cache_all(); if (address >= end) BUG(); - spin_lock(&init_mm.page_table_lock); do { pmd_t *pmd; - pmd = pmd_alloc(dir, address); + pmd = pmd_alloc(&init_mm, dir, address); error = -ENOMEM; if (!pmd) break; @@ -89,7 +88,6 @@ static int remap_area_pages(unsigned long address, unsigned long phys_addr, address = (address + PGDIR_SIZE) & PGDIR_MASK; dir++; } while (address && (address < end)); - spin_unlock(&init_mm.page_table_lock); flush_tlb_all(); return error; } |