diff options
Diffstat (limited to 'arch/powerpc/Kconfig')
| -rw-r--r-- | arch/powerpc/Kconfig | 267 |
1 files changed, 4 insertions, 263 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 6b8b83ebca75..e641bb68d871 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -4,17 +4,7 @@ mainmenu "Linux/PowerPC Kernel Configuration" -config PPC64 - bool "64-bit kernel" - default n - help - This option selects whether a 32-bit or a 64-bit kernel - will be built. - -config PPC_PM_NEEDS_RTC_LIB - bool - select RTC_LIB - default y if PM +source "arch/powerpc/platforms/Kconfig.cputype" config PPC32 bool @@ -135,123 +125,6 @@ config PPC64_SWSUSP depends on PPC64 && (BROKEN || (PPC_PMAC64 && EXPERIMENTAL)) default y -menu "Processor support" -choice - prompt "Processor Type" - depends on PPC32 - default 6xx - -config CLASSIC32 - bool "52xx/6xx/7xx/74xx" - select PPC_FPU - select 6xx - help - There are four families of PowerPC chips supported. The more common - types (601, 603, 604, 740, 750, 7400), the Motorola embedded - versions (821, 823, 850, 855, 860, 52xx, 82xx, 83xx), the AMCC - embedded versions (403 and 405) and the high end 64 bit Power - processors (POWER 3, POWER4, and IBM PPC970 also known as G5). - - This option is the catch-all for 6xx types, including some of the - embedded versions. Unless there is see an option for the specific - chip family you are using, you want this option. - - You do not want this if you are building a kernel for a 64 bit - IBM RS/6000 or an Apple G5, choose 6xx. - - If unsure, select this option - - Note that the kernel runs in 32-bit mode even on 64-bit chips. - -config PPC_82xx - bool "Freescale 82xx" - select 6xx - select PPC_FPU - -config PPC_83xx - bool "Freescale 83xx" - select 6xx - select FSL_SOC - select 83xx - select PPC_FPU - select WANT_DEVICE_TREE - -config PPC_85xx - bool "Freescale 85xx" - select E500 - select FSL_SOC - select 85xx - select WANT_DEVICE_TREE - -config PPC_86xx - bool "Freescale 86xx" - select 6xx - select FSL_SOC - select FSL_PCIE - select PPC_FPU - select ALTIVEC - help - The Freescale E600 SoCs have 74xx cores. - -config PPC_8xx - bool "Freescale 8xx" - select FSL_SOC - select 8xx - -config 40x - bool "AMCC 40x" - select PPC_DCR_NATIVE - -config 44x - bool "AMCC 44x" - select PPC_DCR_NATIVE - select WANT_DEVICE_TREE - -config E200 - bool "Freescale e200" - -endchoice - -config POWER4_ONLY - bool "Optimize for POWER4" - depends on PPC64 - default n - ---help--- - Cause the compiler to optimize for POWER4/POWER5/PPC970 processors. - The resulting binary will not work on POWER3 or RS64 processors - when compiled with binutils 2.15 or later. - -config POWER3 - bool - depends on PPC64 - default y if !POWER4_ONLY - -config POWER4 - depends on PPC64 - def_bool y - -config 6xx - bool - -# this is temp to handle compat with arch=ppc -config 8xx - bool - -# this is temp to handle compat with arch=ppc -config 83xx - bool - -# this is temp to handle compat with arch=ppc -config 85xx - bool - -config E500 - bool - -config PPC_FPU - bool - default y if PPC64 - config PPC_DCR_NATIVE bool default n @@ -270,134 +143,6 @@ config PPC_OF_PLATFORM_PCI depends on PPC64 # not supported on 32 bits yet default n -config 4xx - bool - depends on 40x || 44x - default y - -config BOOKE - bool - depends on E200 || E500 || 44x - default y - -config FSL_BOOKE - bool - depends on E200 || E500 - default y - -config PTE_64BIT - bool - depends on 44x || E500 - default y if 44x - default y if E500 && PHYS_64BIT - -config PHYS_64BIT - bool 'Large physical address support' if E500 - depends on 44x || E500 - select RESOURCES_64BIT - default y if 44x - ---help--- - This option enables kernel support for larger than 32-bit physical - addresses. This features is not be available on all e500 cores. - - If in doubt, say N here. - -config ALTIVEC - bool "AltiVec Support" - depends on CLASSIC32 || POWER4 - ---help--- - This option enables kernel support for the Altivec extensions to the - PowerPC processor. The kernel currently supports saving and restoring - altivec registers, and turning on the 'altivec enable' bit so user - processes can execute altivec instructions. - - This option is only usefully if you have a processor that supports - altivec (G4, otherwise known as 74xx series), but does not have - any affect on a non-altivec cpu (it does, however add code to the - kernel). - - If in doubt, say Y here. - -config SPE - bool "SPE Support" - depends on E200 || E500 - default y - ---help--- - This option enables kernel support for the Signal Processing - Extensions (SPE) to the PowerPC processor. The kernel currently - supports saving and restoring SPE registers, and turning on the - 'spe enable' bit so user processes can execute SPE instructions. - - This option is only useful if you have a processor that supports - SPE (e500, otherwise known as 85xx series), but does not have any - effect on a non-spe cpu (it does, however add code to the kernel). - - If in doubt, say Y here. - -config PPC_STD_MMU - bool - depends on 6xx || POWER3 || POWER4 || PPC64 - default y - -config PPC_STD_MMU_32 - def_bool y - depends on PPC_STD_MMU && PPC32 - -config PPC_MM_SLICES - bool - default y if HUGETLB_PAGE - default n - -config VIRT_CPU_ACCOUNTING - bool "Deterministic task and CPU time accounting" - depends on PPC64 - default y - help - Select this option to enable more accurate task and CPU time - accounting. This is done by reading a CPU counter on each - kernel entry and exit and on transitions within the kernel - between system, softirq and hardirq state, so there is a - small performance impact. This also enables accounting of - stolen time on logically-partitioned systems running on - IBM POWER5-based machines. - - If in doubt, say Y here. - -config SMP - depends on PPC_STD_MMU - bool "Symmetric multi-processing support" - ---help--- - This enables support for systems with more than one CPU. If you have - a system with only one CPU, say N. If you have a system with more - than one CPU, say Y. Note that the kernel does not currently - support SMP machines with 603/603e/603ev or PPC750 ("G3") processors - since they have inadequate hardware support for multiprocessor - operation. - - If you say N here, the kernel will run on single and multiprocessor - machines, but will use only one CPU of a multiprocessor machine. If - you say Y here, the kernel will run on single-processor machines. - On a single-processor machine, the kernel will run faster if you say - N here. - - If you don't know what to do here, say N. - -config NR_CPUS - int "Maximum number of CPUs (2-128)" - range 2 128 - depends on SMP - default "32" if PPC64 - default "4" - -config NOT_COHERENT_CACHE - bool - depends on 4xx || 8xx || E200 - default y - -config CONFIG_CHECK_CACHE_COHERENCY - bool -endmenu - source "init/Kconfig" source "arch/powerpc/platforms/Kconfig" @@ -677,10 +422,6 @@ config SBUS config FSL_SOC bool -config FSL_PCIE - bool - depends on PPC_86xx - # Yes MCA RS/6000s exist but Linux-PPC does not currently support any config MCA bool @@ -688,10 +429,10 @@ config MCA config PCI bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx \ || PPC_MPC52xx || (EMBEDDED && (PPC_PSERIES || PPC_ISERIES)) \ - || MPC7448HPC2 || PPC_PS3 || PPC_HOLLY - default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx \ + || PPC_PS3 + default y if !40x && !CPM2 && !8xx && !PPC_83xx \ && !PPC_85xx && !PPC_86xx - default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS + default PCI_PERMEDIA if !4xx && !CPM2 && !8xx default PCI_QSPAN if !4xx && !CPM2 && 8xx select ARCH_SUPPORTS_MSI help |