diff options
Diffstat (limited to 'arch/powerpc/boot/dts/mpc8544ds.dts')
| -rw-r--r-- | arch/powerpc/boot/dts/mpc8544ds.dts | 473 |
1 files changed, 38 insertions, 435 deletions
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts index d793968743c9..e934987e882b 100644 --- a/arch/powerpc/boot/dts/mpc8544ds.dts +++ b/arch/powerpc/boot/dts/mpc8544ds.dts @@ -9,339 +9,52 @@ * option) any later version. */ -/dts-v1/; +/include/ "fsl/mpc8544si-pre.dtsi" + / { model = "MPC8544DS"; compatible = "MPC8544DS", "MPC85xxDS"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - pci3 = &pci3; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8544@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - next-level-cache = <&L2>; - }; - }; memory { device_type = "memory"; - reg = <0x0 0x0>; // Filled by U-Boot + reg = <0 0 0 0>; // Filled by U-Boot }; - soc8544@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - - ranges = <0x0 0xe0000000 0x100000>; - bus-frequency = <0>; // Filled out by uboot. - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <10>; - }; - - ecm@1000 { - compatible = "fsl,mpc8544-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,mpc8544-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,mpc8544-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x40000>; // L2, 256K - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8544-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8544-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8544-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8544-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8544-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - phy-handle = <&phy0>; - tbi-handle = <&tbi0>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x0>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0x1>; - device_type = "ethernet-phy"; - }; - - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet1: ethernet@26000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - ranges = <0x0 0x26000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; - phy-handle = <&phy1>; - tbi-handle = <&tbi1>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { //global utilities block - compatible = "fsl,mpc8548-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; - - crypto@30000 { - compatible = "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0xfe>; - fsl,descriptor-types-mask = <0x12b0ebf>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; + lbc: localbus@e0005000 { + reg = <0 0xe0005000 0 0x1000>; + }; - msi@41600 { - compatible = "fsl,mpc8544-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; + board_soc: soc: soc8544@e0000000 { + ranges = <0x0 0x0 0xe0000000 0x100000>; }; pci0: pci@e0008000 { - compatible = "fsl,mpc8540-pci"; - device_type = "pci"; + reg = <0 0xe0008000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xe1000000 0x0 0x10000>; + clock-frequency = <66666666>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x11 J17 Slot 1 */ - 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 + 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 /* IDSEL 0x12 J16 Slot 2 */ - 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x9000 0x0 0x0 0x4 &mpic 0x1 0x1>; - - interrupt-parent = <&mpic>; - interrupts = <24 2>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000 - 0x1000000 0x0 0x0 0xe1000000 0x0 0x10000>; - clock-frequency = <66666666>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0008000 0x1000>; + 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x9000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0>; }; pci1: pcie@e0009000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0009000 0x1000>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 - 0x1000000 0x0 0x0 0xe1010000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <25 2>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x4 0x1 - 0000 0x0 0x0 0x2 &mpic 0x5 0x1 - 0000 0x0 0x0 0x3 &mpic 0x6 0x1 - 0000 0x0 0x0 0x4 &mpic 0x7 0x1 - >; + reg = <0x0 0xe0009000 0x0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xe1010000 0x0 0x10000>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0x80000000 0x2000000 0x0 0x80000000 0x0 0x20000000 @@ -353,31 +66,10 @@ }; pci2: pcie@e000a000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe000a000 0x1000>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 - 0x1000000 0x0 0x0 0xe1020000 0x0 0x10000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <26 2>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0000 0x0 0x0 0x4 &mpic 0x3 0x1 - >; + reg = <0x0 0xe000a000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe1020000 0x0 0x10000>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xa0000000 0x2000000 0x0 0xa0000000 0x0 0x10000000 @@ -388,44 +80,11 @@ }; }; - pci3: pcie@e000b000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe000b000 0x1000>; - bus-range = <0 255>; - ranges = <0x2000000 0x0 0xb0000000 0xb0000000 0x0 0x100000 - 0x1000000 0x0 0x0 0xb0100000 0x0 0x100000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <27 2>; - interrupt-map-mask = <0xff00 0x0 0x0 0x1>; - interrupt-map = < - // IDSEL 0x1c USB - 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2 - 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2 - 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2 - 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2 - - // IDSEL 0x1d Audio - 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 - - // IDSEL 0x1e Legacy - 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 - 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 - - // IDSEL 0x1f IDE/SATA - 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 - 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 - >; - + board_pci3: pci3: pcie@e000b000 { + reg = <0x0 0xe000b000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xb0000000 0 0xb0000000 0x0 0x100000 + 0x1000000 0x0 0x00000000 0 0xb0100000 0x0 0x100000>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xb0000000 0x2000000 0x0 0xb0000000 0x0 0x100000 @@ -433,70 +92,14 @@ 0x1000000 0x0 0x0 0x1000000 0x0 0x0 0x0 0x100000>; - - uli1575@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - ranges = <0x2000000 0x0 0xb0000000 - 0x2000000 0x0 0xb0000000 - 0x0 0x100000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - isa@1e { - device_type = "isa"; - #interrupt-cells = <2>; - #size-cells = <1>; - #address-cells = <2>; - reg = <0xf000 0x0 0x0 0x0 0x0>; - ranges = <0x1 0x0 - 0x1000000 0x0 0x0 - 0x1000>; - interrupt-parent = <&i8259>; - - i8259: interrupt-controller@20 { - reg = <0x1 0x20 0x2 - 0x1 0xa0 0x2 - 0x1 0x4d0 0x2>; - interrupt-controller; - device_type = "interrupt-controller"; - #address-cells = <0>; - #interrupt-cells = <2>; - compatible = "chrp,iic"; - interrupts = <9 2>; - interrupt-parent = <&mpic>; - }; - - i8042@60 { - #size-cells = <0>; - #address-cells = <1>; - reg = <0x1 0x60 0x1 0x1 0x64 0x1>; - interrupts = <1 3 12 3>; - interrupt-parent = <&i8259>; - - keyboard@0 { - reg = <0x0>; - compatible = "pnpPNP,303"; - }; - - mouse@1 { - reg = <0x1>; - compatible = "pnpPNP,f03"; - }; - }; - - rtc@70 { - compatible = "pnpPNP,b00"; - reg = <0x1 0x70 0x2>; - }; - - gpio@400 { - reg = <0x1 0x400 0x80>; - }; - }; - }; }; }; }; + +/* + * mpc8544ds.dtsi must be last to ensure board_pci3 overrides pci3 settings + * for interrupt-map & interrupt-map-mask + */ + +/include/ "fsl/mpc8544si-post.dtsi" +/include/ "mpc8544ds.dtsi" |