summaryrefslogtreecommitdiff
path: root/arch/powerpc/boot/dts/mpc8568mds.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/boot/dts/mpc8568mds.dts')
-rw-r--r--arch/powerpc/boot/dts/mpc8568mds.dts283
1 files changed, 142 insertions, 141 deletions
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index df4b5e89d7e4..3e6739fc0aa2 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -1,7 +1,7 @@
/*
* MPC8568E MDS Device Tree Source
*
- * Copyright 2007 Freescale Semiconductor Inc.
+ * Copyright 2007, 2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -9,6 +9,7 @@
* option) any later version.
*/
+/dts-v1/;
/*
/memreserve/ 00000000 1000000;
@@ -37,11 +38,11 @@
PowerPC,8568@0 {
device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <20>; // 32 bytes
- i-cache-line-size = <20>; // 32 bytes
- d-cache-size = <8000>; // L1, 32K
- i-cache-size = <8000>; // L1, 32K
+ reg = <0x0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
@@ -50,36 +51,36 @@
memory {
device_type = "memory";
- reg = <00000000 10000000>;
+ reg = <0x0 0x10000000>;
};
bcsr@f8000000 {
device_type = "board-control";
- reg = <f8000000 8000>;
+ reg = <0xf8000000 0x8000>;
};
soc8568@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
- ranges = <0 e0000000 00100000>;
- reg = <e0000000 00001000>;
+ ranges = <0x0 0xe0000000 0x100000>;
+ reg = <0xe0000000 0x1000>;
bus-frequency = <0>;
memory-controller@2000 {
compatible = "fsl,8568-memory-controller";
- reg = <2000 1000>;
+ reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
- interrupts = <12 2>;
+ interrupts = <18 2>;
};
l2-cache-controller@20000 {
compatible = "fsl,8568-l2-cache-controller";
- reg = <20000 1000>;
- cache-line-size = <20>; // 32 bytes
- cache-size = <80000>; // L2, 512K
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2, 512K
interrupt-parent = <&mpic>;
- interrupts = <10 2>;
+ interrupts = <16 2>;
};
i2c@3000 {
@@ -87,14 +88,14 @@
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
- reg = <3000 100>;
- interrupts = <2b 2>;
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
rtc@68 {
compatible = "dallas,ds1374";
- reg = <68>;
+ reg = <0x68>;
};
};
@@ -103,8 +104,8 @@
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
- reg = <3100 100>;
- interrupts = <2b 2>;
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
@@ -113,30 +114,30 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
- reg = <24520 20>;
+ reg = <0x24520 0x20>;
phy0: ethernet-phy@7 {
interrupt-parent = <&mpic>;
interrupts = <1 1>;
- reg = <7>;
+ reg = <0x7>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
- reg = <1>;
+ reg = <0x1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <1 1>;
- reg = <2>;
+ reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
- reg = <3>;
+ reg = <0x3>;
device_type = "ethernet-phy";
};
};
@@ -146,9 +147,9 @@
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
- reg = <24000 1000>;
+ reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1d 2 1e 2 22 2>;
+ interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy2>;
};
@@ -158,9 +159,9 @@
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
- reg = <25000 1000>;
+ reg = <0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <23 2 24 2 28 2>;
+ interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy3>;
};
@@ -169,15 +170,15 @@
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
- reg = <4500 100>;
+ reg = <0x4500 0x100>;
clock-frequency = <0>;
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
global-utilities@e0000 { //global utilities block
compatible = "fsl,mpc8548-guts";
- reg = <e0000 1000>;
+ reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
@@ -185,9 +186,9 @@
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
- reg = <4600 100>;
+ reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
@@ -195,13 +196,13 @@
device_type = "crypto";
model = "SEC2";
compatible = "talitos";
- reg = <30000 f000>;
- interrupts = <2d 2>;
+ reg = <0x30000 0xf000>;
+ interrupts = <45 2>;
interrupt-parent = <&mpic>;
num-channels = <4>;
- channel-fifo-len = <18>;
- exec-units-mask = <000000fe>;
- descriptor-types-mask = <012b0ebf>;
+ channel-fifo-len = <24>;
+ exec-units-mask = <0xfe>;
+ descriptor-types-mask = <0x12b0ebf>;
};
mpic: pic@40000 {
@@ -209,73 +210,73 @@
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- reg = <40000 40000>;
+ reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
};
par_io@e0100 {
- reg = <e0100 100>;
+ reg = <0xe0100 0x100>;
device_type = "par_io";
num-ports = <7>;
pio1: ucc_pin@01 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
- 4 0a 1 0 2 0 /* TxD0 */
- 4 09 1 0 2 0 /* TxD1 */
- 4 08 1 0 2 0 /* TxD2 */
- 4 07 1 0 2 0 /* TxD3 */
- 4 17 1 0 2 0 /* TxD4 */
- 4 16 1 0 2 0 /* TxD5 */
- 4 15 1 0 2 0 /* TxD6 */
- 4 14 1 0 2 0 /* TxD7 */
- 4 0f 2 0 2 0 /* RxD0 */
- 4 0e 2 0 2 0 /* RxD1 */
- 4 0d 2 0 2 0 /* RxD2 */
- 4 0c 2 0 2 0 /* RxD3 */
- 4 1d 2 0 2 0 /* RxD4 */
- 4 1c 2 0 2 0 /* RxD5 */
- 4 1b 2 0 2 0 /* RxD6 */
- 4 1a 2 0 2 0 /* RxD7 */
- 4 0b 1 0 2 0 /* TX_EN */
- 4 18 1 0 2 0 /* TX_ER */
- 4 10 2 0 2 0 /* RX_DV */
- 4 1e 2 0 2 0 /* RX_ER */
- 4 11 2 0 2 0 /* RX_CLK */
- 4 13 1 0 2 0 /* GTX_CLK */
- 1 1f 2 0 3 0>; /* GTX125 */
+ 0x4 0xa 0x1 0x0 0x2 0x0 /* TxD0 */
+ 0x4 0x9 0x1 0x0 0x2 0x0 /* TxD1 */
+ 0x4 0x8 0x1 0x0 0x2 0x0 /* TxD2 */
+ 0x4 0x7 0x1 0x0 0x2 0x0 /* TxD3 */
+ 0x4 0x17 0x1 0x0 0x2 0x0 /* TxD4 */
+ 0x4 0x16 0x1 0x0 0x2 0x0 /* TxD5 */
+ 0x4 0x15 0x1 0x0 0x2 0x0 /* TxD6 */
+ 0x4 0x14 0x1 0x0 0x2 0x0 /* TxD7 */
+ 0x4 0xf 0x2 0x0 0x2 0x0 /* RxD0 */
+ 0x4 0xe 0x2 0x0 0x2 0x0 /* RxD1 */
+ 0x4 0xd 0x2 0x0 0x2 0x0 /* RxD2 */
+ 0x4 0xc 0x2 0x0 0x2 0x0 /* RxD3 */
+ 0x4 0x1d 0x2 0x0 0x2 0x0 /* RxD4 */
+ 0x4 0x1c 0x2 0x0 0x2 0x0 /* RxD5 */
+ 0x4 0x1b 0x2 0x0 0x2 0x0 /* RxD6 */
+ 0x4 0x1a 0x2 0x0 0x2 0x0 /* RxD7 */
+ 0x4 0xb 0x1 0x0 0x2 0x0 /* TX_EN */
+ 0x4 0x18 0x1 0x0 0x2 0x0 /* TX_ER */
+ 0x4 0x10 0x2 0x0 0x2 0x0 /* RX_DV */
+ 0x4 0x1e 0x2 0x0 0x2 0x0 /* RX_ER */
+ 0x4 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */
+ 0x4 0x13 0x1 0x0 0x2 0x0 /* GTX_CLK */
+ 0x1 0x1f 0x2 0x0 0x3 0x0>; /* GTX125 */
};
pio2: ucc_pin@02 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
- 5 0a 1 0 2 0 /* TxD0 */
- 5 09 1 0 2 0 /* TxD1 */
- 5 08 1 0 2 0 /* TxD2 */
- 5 07 1 0 2 0 /* TxD3 */
- 5 17 1 0 2 0 /* TxD4 */
- 5 16 1 0 2 0 /* TxD5 */
- 5 15 1 0 2 0 /* TxD6 */
- 5 14 1 0 2 0 /* TxD7 */
- 5 0f 2 0 2 0 /* RxD0 */
- 5 0e 2 0 2 0 /* RxD1 */
- 5 0d 2 0 2 0 /* RxD2 */
- 5 0c 2 0 2 0 /* RxD3 */
- 5 1d 2 0 2 0 /* RxD4 */
- 5 1c 2 0 2 0 /* RxD5 */
- 5 1b 2 0 2 0 /* RxD6 */
- 5 1a 2 0 2 0 /* RxD7 */
- 5 0b 1 0 2 0 /* TX_EN */
- 5 18 1 0 2 0 /* TX_ER */
- 5 10 2 0 2 0 /* RX_DV */
- 5 1e 2 0 2 0 /* RX_ER */
- 5 11 2 0 2 0 /* RX_CLK */
- 5 13 1 0 2 0 /* GTX_CLK */
- 1 1f 2 0 3 0 /* GTX125 */
- 4 06 3 0 2 0 /* MDIO */
- 4 05 1 0 2 0>; /* MDC */
+ 0x5 0xa 0x1 0x0 0x2 0x0 /* TxD0 */
+ 0x5 0x9 0x1 0x0 0x2 0x0 /* TxD1 */
+ 0x5 0x8 0x1 0x0 0x2 0x0 /* TxD2 */
+ 0x5 0x7 0x1 0x0 0x2 0x0 /* TxD3 */
+ 0x5 0x17 0x1 0x0 0x2 0x0 /* TxD4 */
+ 0x5 0x16 0x1 0x0 0x2 0x0 /* TxD5 */
+ 0x5 0x15 0x1 0x0 0x2 0x0 /* TxD6 */
+ 0x5 0x14 0x1 0x0 0x2 0x0 /* TxD7 */
+ 0x5 0xf 0x2 0x0 0x2 0x0 /* RxD0 */
+ 0x5 0xe 0x2 0x0 0x2 0x0 /* RxD1 */
+ 0x5 0xd 0x2 0x0 0x2 0x0 /* RxD2 */
+ 0x5 0xc 0x2 0x0 0x2 0x0 /* RxD3 */
+ 0x5 0x1d 0x2 0x0 0x2 0x0 /* RxD4 */
+ 0x5 0x1c 0x2 0x0 0x2 0x0 /* RxD5 */
+ 0x5 0x1b 0x2 0x0 0x2 0x0 /* RxD6 */
+ 0x5 0x1a 0x2 0x0 0x2 0x0 /* RxD7 */
+ 0x5 0xb 0x1 0x0 0x2 0x0 /* TX_EN */
+ 0x5 0x18 0x1 0x0 0x2 0x0 /* TX_ER */
+ 0x5 0x10 0x2 0x0 0x2 0x0 /* RX_DV */
+ 0x5 0x1e 0x2 0x0 0x2 0x0 /* RX_ER */
+ 0x5 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */
+ 0x5 0x13 0x1 0x0 0x2 0x0 /* GTX_CLK */
+ 0x1 0x1f 0x2 0x0 0x3 0x0 /* GTX125 */
+ 0x4 0x6 0x3 0x0 0x2 0x0 /* MDIO */
+ 0x4 0x5 0x1 0x0 0x2 0x0>; /* MDC */
};
};
};
@@ -285,28 +286,28 @@
#size-cells = <1>;
device_type = "qe";
compatible = "fsl,qe";
- ranges = <0 e0080000 00040000>;
- reg = <e0080000 480>;
+ ranges = <0x0 0xe0080000 0x40000>;
+ reg = <0xe0080000 0x480>;
brg-frequency = <0>;
- bus-frequency = <179A7B00>;
+ bus-frequency = <396000000>;
muram@10000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,qe-muram", "fsl,cpm-muram";
- ranges = <0 00010000 0000c000>;
+ ranges = <0x0 0x10000 0xc000>;
data-only@0 {
compatible = "fsl,qe-muram-data",
"fsl,cpm-muram-data";
- reg = <0 c000>;
+ reg = <0x0 0xc000>;
};
};
spi@4c0 {
cell-index = <0>;
compatible = "fsl,spi";
- reg = <4c0 40>;
+ reg = <0x4c0 0x40>;
interrupts = <2>;
interrupt-parent = <&qeic>;
mode = "cpu";
@@ -315,7 +316,7 @@
spi@500 {
cell-index = <1>;
compatible = "fsl,spi";
- reg = <500 40>;
+ reg = <0x500 0x40>;
interrupts = <1>;
interrupt-parent = <&qeic>;
mode = "cpu";
@@ -325,8 +326,8 @@
device_type = "network";
compatible = "ucc_geth";
cell-index = <1>;
- reg = <2000 200>;
- interrupts = <20>;
+ reg = <0x2000 0x200>;
+ interrupts = <32>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
@@ -340,8 +341,8 @@
device_type = "network";
compatible = "ucc_geth";
cell-index = <2>;
- reg = <3000 200>;
- interrupts = <21>;
+ reg = <0x3000 0x200>;
+ interrupts = <33>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
@@ -354,7 +355,7 @@
mdio@2120 {
#address-cells = <1>;
#size-cells = <0>;
- reg = <2120 18>;
+ reg = <0x2120 0x18>;
compatible = "fsl,ucc-mdio";
/* These are the same PHYs as on
@@ -362,25 +363,25 @@
qe_phy0: ethernet-phy@07 {
interrupt-parent = <&mpic>;
interrupts = <1 1>;
- reg = <7>;
+ reg = <0x7>;
device_type = "ethernet-phy";
};
qe_phy1: ethernet-phy@01 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
- reg = <1>;
+ reg = <0x1>;
device_type = "ethernet-phy";
};
qe_phy2: ethernet-phy@02 {
interrupt-parent = <&mpic>;
interrupts = <1 1>;
- reg = <2>;
+ reg = <0x2>;
device_type = "ethernet-phy";
};
qe_phy3: ethernet-phy@03 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
- reg = <3>;
+ reg = <0x3>;
device_type = "ethernet-phy";
};
};
@@ -390,9 +391,9 @@
compatible = "fsl,qe-ic";
#address-cells = <0>;
#interrupt-cells = <1>;
- reg = <80 80>;
+ reg = <0x80 0x80>;
big-endian;
- interrupts = <2e 2 2e 2>; //high:30 low:30
+ interrupts = <46 2 46 2>; //high:30 low:30
interrupt-parent = <&mpic>;
};
@@ -400,30 +401,30 @@
pci0: pci@e0008000 {
cell-index = <0>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x12 AD18 */
- 9000 0 0 1 &mpic 5 1
- 9000 0 0 2 &mpic 6 1
- 9000 0 0 3 &mpic 7 1
- 9000 0 0 4 &mpic 4 1
+ 0x9000 0x0 0x0 0x1 &mpic 0x5 0x1
+ 0x9000 0x0 0x0 0x2 &mpic 0x6 0x1
+ 0x9000 0x0 0x0 0x3 &mpic 0x7 0x1
+ 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1
/* IDSEL 0x13 AD19 */
- 9800 0 0 1 &mpic 6 1
- 9800 0 0 2 &mpic 7 1
- 9800 0 0 3 &mpic 4 1
- 9800 0 0 4 &mpic 5 1>;
+ 0x9800 0x0 0x0 0x1 &mpic 0x6 0x1
+ 0x9800 0x0 0x0 0x2 &mpic 0x7 0x1
+ 0x9800 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x9800 0x0 0x0 0x4 &mpic 0x5 0x1>;
interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- bus-range = <0 ff>;
- ranges = <02000000 0 80000000 80000000 0 20000000
- 01000000 0 00000000 e2000000 0 00800000>;
- clock-frequency = <3f940aa>;
+ interrupts = <24 2>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>;
+ clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e0008000 1000>;
+ reg = <0xe0008000 0x1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
};
@@ -431,39 +432,39 @@
/* PCI Express */
pci1: pcie@e000a000 {
cell-index = <2>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 (PEX) */
- 00000 0 0 1 &mpic 0 1
- 00000 0 0 2 &mpic 1 1
- 00000 0 0 3 &mpic 2 1
- 00000 0 0 4 &mpic 3 1>;
+ 00000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 00000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 00000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
interrupt-parent = <&mpic>;
- interrupts = <1a 2>;
- bus-range = <0 ff>;
- ranges = <02000000 0 a0000000 a0000000 0 10000000
- 01000000 0 00000000 e2800000 0 00800000>;
- clock-frequency = <1fca055>;
+ interrupts = <26 2>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+ 0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>;
+ clock-frequency = <33333333>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e000a000 1000>;
+ reg = <0xe000a000 0x1000>;
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
pcie@0 {
- reg = <0 0 0 0 0>;
+ reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- ranges = <02000000 0 a0000000
- 02000000 0 a0000000
- 0 10000000
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x10000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00800000>;
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x800000>;
};
};
};
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-19 17:59:31 +0000