diff options
Diffstat (limited to 'arch/powerpc/boot')
64 files changed, 3749 insertions, 1675 deletions
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 1aded8f759d0..5ba50c673390 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -40,6 +40,7 @@ $(obj)/ebony.o: BOOTCFLAGS += -mcpu=405 $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405 $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405 $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405 +$(obj)/virtex405-head.o: BOOTCFLAGS += -mcpu=405 zlib := inffast.c inflate.c inftrees.c @@ -64,7 +65,8 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \ fixed-head.S ep88xc.c ep405.c \ cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \ - cuboot-warp.c cuboot-85xx-cpm2.c + cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \ + virtex405-head.S src-boot := $(src-wlib) $(src-plat) empty.c src-boot := $(addprefix $(obj)/, $(src-boot)) @@ -192,7 +194,7 @@ image-$(CONFIG_PPC_CHRP) += zImage.chrp image-$(CONFIG_PPC_EFIKA) += zImage.chrp image-$(CONFIG_PPC_PMAC) += zImage.pmac image-$(CONFIG_PPC_HOLLY) += zImage.holly -image-$(CONFIG_PPC_PRPMC2800) += zImage.prpmc2800 +image-$(CONFIG_PPC_PRPMC2800) += dtbImage.prpmc2800 image-$(CONFIG_PPC_ISERIES) += zImage.iseries image-$(CONFIG_DEFAULT_UIMAGE) += uImage @@ -216,6 +218,7 @@ image-$(CONFIG_RAINIER) += cuImage.rainier image-$(CONFIG_TAISHAN) += cuImage.taishan image-$(CONFIG_KATMAI) += cuImage.katmai image-$(CONFIG_WARP) += cuImage.warp +image-$(CONFIG_YOSEMITE) += cuImage.yosemite # Board ports in arch/powerpc/platform/8xx/Kconfig image-$(CONFIG_PPC_MPC86XADS) += cuImage.mpc866ads @@ -255,6 +258,7 @@ image-$(CONFIG_TQM8555) += cuImage.tqm8555 image-$(CONFIG_TQM8560) += cuImage.tqm8560 image-$(CONFIG_SBC8548) += cuImage.sbc8548 image-$(CONFIG_SBC8560) += cuImage.sbc8560 +image-$(CONFIG_KSI8560) += cuImage.ksi8560 # Board ports in arch/powerpc/platform/embedded6xx/Kconfig image-$(CONFIG_STORCENTER) += cuImage.storcenter @@ -285,11 +289,11 @@ $(obj)/zImage.%: vmlinux $(wrapperbits) $(call if_changed,wrap,$*) # dtbImage% - a dtbImage is a zImage with an embedded device tree blob -$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(dtstree)/%.dts - $(call if_changed,wrap,$*,$(dtstree)/$*.dts,,$(obj)/ramdisk.image.gz) +$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/%.dtb + $(call if_changed,wrap,$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz) -$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(dtstree)/%.dts - $(call if_changed,wrap,$*,$(dtstree)/$*.dts) +$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/%.dtb + $(call if_changed,wrap,$*,,$(obj)/$*.dtb) # This cannot be in the root of $(src) as the zImage rule always adds a $(obj) # prefix @@ -302,14 +306,24 @@ $(obj)/zImage.iseries: vmlinux $(obj)/uImage: vmlinux $(wrapperbits) $(call if_changed,wrap,uboot) -$(obj)/cuImage.%: vmlinux $(dtstree)/%.dts $(wrapperbits) - $(call if_changed,wrap,cuboot-$*,$(dtstree)/$*.dts) +$(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) + $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb) -$(obj)/treeImage.initrd.%: vmlinux $(dtstree)/%.dts $(wrapperbits) - $(call if_changed,wrap,treeboot-$*,$(dtstree)/$*.dts,,$(obj)/ramdisk.image.gz) +$(obj)/simpleImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) + $(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz) -$(obj)/treeImage.%: vmlinux $(dtstree)/%.dts $(wrapperbits) - $(call if_changed,wrap,treeboot-$*,$(dtstree)/$*.dts) +$(obj)/simpleImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) + $(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb) + +$(obj)/treeImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) + $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz) + +$(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) + $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb) + +# Rule to build device tree blobs +$(obj)/%.dtb: $(dtstree)/%.dts $(obj)/dtc + $(obj)/dtc -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts # If there isn't a platform selected then just strip the vmlinux. ifeq (,$(image-y)) @@ -326,7 +340,7 @@ install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y)) # anything not in $(targets) clean-files += $(image-) $(initrd-) zImage zImage.initrd cuImage.* treeImage.* \ - otheros.bld + otheros.bld *.dtb # clean up files cached by wrapper clean-kernel := vmlinux.strip vmlinux.bin diff --git a/arch/powerpc/boot/bamboo.c b/arch/powerpc/boot/bamboo.c index 54b33f1500e2..b82cacbc60db 100644 --- a/arch/powerpc/boot/bamboo.c +++ b/arch/powerpc/boot/bamboo.c @@ -33,7 +33,8 @@ static void bamboo_fixups(void) ibm440ep_fixup_clocks(sysclk, 11059200, 25000000); ibm4xx_sdram_fixup_memsize(); ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00); - dt_fixup_mac_addresses(bamboo_mac0, bamboo_mac1); + dt_fixup_mac_address_by_alias("ethernet0", bamboo_mac0); + dt_fixup_mac_address_by_alias("ethernet1", bamboo_mac1); } void bamboo_init(void *mac0, void *mac1) diff --git a/arch/powerpc/boot/cpm-serial.c b/arch/powerpc/boot/cpm-serial.c index 28296facb2ae..19dc15abe43d 100644 --- a/arch/powerpc/boot/cpm-serial.c +++ b/arch/powerpc/boot/cpm-serial.c @@ -11,6 +11,7 @@ #include "types.h" #include "io.h" #include "ops.h" +#include "page.h" struct cpm_scc { u32 gsmrl; @@ -42,6 +43,22 @@ struct cpm_param { u16 tbase; u8 rfcr; u8 tfcr; + u16 mrblr; + u32 rstate; + u8 res1[4]; + u16 rbptr; + u8 res2[6]; + u32 tstate; + u8 res3[4]; + u16 tbptr; + u8 res4[6]; + u16 maxidl; + u16 idlc; + u16 brkln; + u16 brkec; + u16 brkcr; + u16 rmask; + u8 res5[4]; }; struct cpm_bd { @@ -54,10 +71,10 @@ static void *cpcr; static struct cpm_param *param; static struct cpm_smc *smc; static struct cpm_scc *scc; -struct cpm_bd *tbdf, *rbdf; +static struct cpm_bd *tbdf, *rbdf; static u32 cpm_cmd; -static u8 *muram_start; -static u32 muram_offset; +static void *cbd_addr; +static u32 cbd_offset; static void (*do_cmd)(int op); static void (*enable_port)(void); @@ -119,20 +136,25 @@ static int cpm_serial_open(void) out_8(¶m->rfcr, 0x10); out_8(¶m->tfcr, 0x10); - - rbdf = (struct cpm_bd *)muram_start; - rbdf->addr = (u8 *)(rbdf + 2); + out_be16(¶m->mrblr, 1); + out_be16(¶m->maxidl, 0); + out_be16(¶m->brkec, 0); + out_be16(¶m->brkln, 0); + out_be16(¶m->brkcr, 0); + + rbdf = cbd_addr; + rbdf->addr = (u8 *)rbdf - 1; rbdf->sc = 0xa000; rbdf->len = 1; tbdf = rbdf + 1; - tbdf->addr = (u8 *)(rbdf + 2) + 1; + tbdf->addr = (u8 *)rbdf - 2; tbdf->sc = 0x2000; tbdf->len = 1; sync(); - out_be16(¶m->rbase, muram_offset); - out_be16(¶m->tbase, muram_offset + sizeof(struct cpm_bd)); + out_be16(¶m->rbase, cbd_offset); + out_be16(¶m->tbase, cbd_offset + sizeof(struct cpm_bd)); do_cmd(CPM_CMD_INIT_RX_TX); @@ -175,10 +197,12 @@ static unsigned char cpm_serial_getc(void) int cpm_console_init(void *devp, struct serial_console_data *scdp) { - void *reg_virt[2]; - int is_smc = 0, is_cpm2 = 0, n; - unsigned long reg_phys; + void *vreg[2]; + u32 reg[2]; + int is_smc = 0, is_cpm2 = 0; void *parent, *muram; + void *muram_addr; + unsigned long muram_offset, muram_size; if (dt_is_compatible(devp, "fsl,cpm1-smc-uart")) { is_smc = 1; @@ -202,63 +226,64 @@ int cpm_console_init(void *devp, struct serial_console_data *scdp) else do_cmd = cpm1_cmd; - n = getprop(devp, "fsl,cpm-command", &cpm_cmd, 4); - if (n < 4) + if (getprop(devp, "fsl,cpm-command", &cpm_cmd, 4) < 4) return -1; - n = getprop(devp, "virtual-reg", reg_virt, sizeof(reg_virt)); - if (n < (int)sizeof(reg_virt)) { - for (n = 0; n < 2; n++) { - if (!dt_xlate_reg(devp, n, ®_phys, NULL)) - return -1; - - reg_virt[n] = (void *)reg_phys; - } - } + if (dt_get_virtual_reg(devp, vreg, 2) < 2) + return -1; if (is_smc) - smc = reg_virt[0]; + smc = vreg[0]; else - scc = reg_virt[0]; + scc = vreg[0]; - param = reg_virt[1]; + param = vreg[1]; parent = get_parent(devp); if (!parent) return -1; - n = getprop(parent, "virtual-reg", reg_virt, sizeof(reg_virt)); - if (n < (int)sizeof(reg_virt)) { - if (!dt_xlate_reg(parent, 0, ®_phys, NULL)) - return -1; - - reg_virt[0] = (void *)reg_phys; - } - - cpcr = reg_virt[0]; + if (dt_get_virtual_reg(parent, &cpcr, 1) < 1) + return -1; muram = finddevice("/soc/cpm/muram/data"); if (!muram) return -1; /* For bootwrapper-compatible device trees, we assume that the first - * entry has at least 18 bytes, and that #address-cells/#data-cells + * entry has at least 128 bytes, and that #address-cells/#data-cells * is one for both parent and child. */ - n = getprop(muram, "virtual-reg", reg_virt, sizeof(reg_virt)); - if (n < (int)sizeof(reg_virt)) { - if (!dt_xlate_reg(muram, 0, ®_phys, NULL)) - return -1; + if (dt_get_virtual_reg(muram, &muram_addr, 1) < 1) + return -1; - reg_virt[0] = (void *)reg_phys; - } + if (getprop(muram, "reg", reg, 8) < 8) + return -1; - muram_start = reg_virt[0]; + muram_offset = reg[0]; + muram_size = reg[1]; - n = getprop(muram, "reg", &muram_offset, 4); - if (n < 4) - return -1; + /* Store the buffer descriptors at the end of the first muram chunk. + * For SMC ports on CPM2-based platforms, relocate the parameter RAM + * just before the buffer descriptors. + */ + + cbd_offset = muram_offset + muram_size - 2 * sizeof(struct cpm_bd); + + if (is_cpm2 && is_smc) { + u16 *smc_base = (u16 *)param; + u16 pram_offset; + + pram_offset = cbd_offset - 64; + pram_offset = _ALIGN_DOWN(pram_offset, 64); + + disable_port(); + out_be16(smc_base, pram_offset); + param = muram_addr - muram_offset + pram_offset; + } + + cbd_addr = muram_addr - muram_offset + cbd_offset; scdp->open = cpm_serial_open; scdp->putc = cpm_serial_putc; diff --git a/arch/powerpc/boot/cuboot-pq2.c b/arch/powerpc/boot/cuboot-pq2.c index f56ac6cae9f3..9c7d13428293 100644 --- a/arch/powerpc/boot/cuboot-pq2.c +++ b/arch/powerpc/boot/cuboot-pq2.c @@ -128,7 +128,7 @@ static void fixup_pci(void) u8 *soc_regs; int i, len; void *node, *parent_node; - u32 naddr, nsize, mem_log2; + u32 naddr, nsize, mem_pow2, mem_mask; node = finddevice("/pci"); if (!node || !dt_is_compatible(node, "fsl,pq2-pci")) @@ -141,7 +141,7 @@ static void fixup_pci(void) soc_regs = (u8 *)fsl_get_immr(); if (!soc_regs) - goto err; + goto unhandled; dt_get_reg_format(node, &naddr, &nsize); if (naddr != 3 || nsize != 2) @@ -153,7 +153,7 @@ static void fixup_pci(void) dt_get_reg_format(parent_node, &naddr, &nsize); if (naddr != 1 || nsize != 1) - goto err; + goto unhandled; len = getprop(node, "ranges", pci_ranges_buf, sizeof(pci_ranges_buf)); @@ -170,14 +170,20 @@ static void fixup_pci(void) } if (!mem || !mmio || !io) - goto err; + goto unhandled; + if (mem->size[1] != mmio->size[1]) + goto unhandled; + if (mem->size[1] & (mem->size[1] - 1)) + goto unhandled; + if (io->size[1] & (io->size[1] - 1)) + goto unhandled; if (mem->phys_addr + mem->size[1] == mmio->phys_addr) mem_base = mem; else if (mmio->phys_addr + mmio->size[1] == mem->phys_addr) mem_base = mmio; else - goto err; + goto unhandled; out_be32(&pci_regs[1][0], mem_base->phys_addr | 1); out_be32(&pci_regs[2][0], ~(mem->size[1] + mmio->size[1] - 1)); @@ -201,8 +207,9 @@ static void fixup_pci(void) out_le32(&pci_regs[0][58], 0); out_le32(&pci_regs[0][60], 0); - mem_log2 = 1 << (__ilog2_u32(bd.bi_memsize - 1) + 1); - out_le32(&pci_regs[0][62], 0xa0000000 | ~((1 << (mem_log2 - 12)) - 1)); + mem_pow2 = 1 << (__ilog2_u32(bd.bi_memsize - 1) + 1); + mem_mask = ~(mem_pow2 - 1) >> 12; + out_le32(&pci_regs[0][62], 0xa0000000 | mem_mask); /* If PCI is disabled, drive RST high to enable. */ if (!(in_le32(&pci_regs[0][32]) & 1)) { @@ -228,7 +235,11 @@ static void fixup_pci(void) return; err: - printf("Bad PCI node\r\n"); + printf("Bad PCI node -- using existing firmware setup.\r\n"); + return; + +unhandled: + printf("Unsupported PCI node -- using existing firmware setup.\r\n"); } static void pq2_platform_fixups(void) diff --git a/arch/powerpc/boot/cuboot-rainier.c b/arch/powerpc/boot/cuboot-rainier.c index cf452b66dce8..0a3fddee54df 100644 --- a/arch/powerpc/boot/cuboot-rainier.c +++ b/arch/powerpc/boot/cuboot-rainier.c @@ -42,7 +42,8 @@ static void rainier_fixups(void) ibm440ep_fixup_clocks(sysclk, 11059200, 50000000); ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); ibm4xx_denali_fixup_memsize(); - dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr); + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); + dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); } void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, diff --git a/arch/powerpc/boot/cuboot-sequoia.c b/arch/powerpc/boot/cuboot-sequoia.c index f555575a44de..caf8f2e842ea 100644 --- a/arch/powerpc/boot/cuboot-sequoia.c +++ b/arch/powerpc/boot/cuboot-sequoia.c @@ -42,7 +42,8 @@ static void sequoia_fixups(void) ibm440ep_fixup_clocks(sysclk, 11059200, 50000000); ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); ibm4xx_denali_fixup_memsize(); - dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr); + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); + dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); } void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, diff --git a/arch/powerpc/boot/cuboot-taishan.c b/arch/powerpc/boot/cuboot-taishan.c index b55b80467eed..9bc906a754dd 100644 --- a/arch/powerpc/boot/cuboot-taishan.c +++ b/arch/powerpc/boot/cuboot-taishan.c @@ -40,7 +40,8 @@ static void taishan_fixups(void) ibm4xx_sdram_fixup_memsize(); - dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr); + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); + dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); } diff --git a/arch/powerpc/boot/cuboot-warp.c b/arch/powerpc/boot/cuboot-warp.c index 3db93e85e9ea..eb108a877492 100644 --- a/arch/powerpc/boot/cuboot-warp.c +++ b/arch/powerpc/boot/cuboot-warp.c @@ -24,7 +24,7 @@ static void warp_fixups(void) ibm440ep_fixup_clocks(sysclk, 11059200, 50000000); ibm4xx_sdram_fixup_memsize(); ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); - dt_fixup_mac_addresses(&bd.bi_enetaddr); + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); } diff --git a/arch/powerpc/boot/cuboot-yosemite.c b/arch/powerpc/boot/cuboot-yosemite.c new file mode 100644 index 000000000000..cc6e338c5d0d --- /dev/null +++ b/arch/powerpc/boot/cuboot-yosemite.c @@ -0,0 +1,44 @@ +/* + * Old U-boot compatibility for Yosemite + * + * Author: Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * Copyright 2008 IBM Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "stdio.h" +#include "4xx.h" +#include "44x.h" +#include "cuboot.h" + +#define TARGET_4xx +#define TARGET_44x +#include "ppcboot.h" + +static bd_t bd; + +static void yosemite_fixups(void) +{ + unsigned long sysclk = 66666666; + + ibm440ep_fixup_clocks(sysclk, 11059200, 50000000); + ibm4xx_sdram_fixup_memsize(); + ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00); + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); + dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + platform_ops.fixups = yosemite_fixups; + platform_ops.exit = ibm44x_dbcr_reset; + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/devtree.c b/arch/powerpc/boot/devtree.c index 60f561e307a9..5d12336dc360 100644 --- a/arch/powerpc/boot/devtree.c +++ b/arch/powerpc/boot/devtree.c @@ -350,3 +350,23 @@ int dt_is_compatible(void *node, const char *compat) return 0; } + +int dt_get_virtual_reg(void *node, void **addr, int nres) +{ + unsigned long xaddr; + int n; + + n = getprop(node, "virtual-reg", addr, nres * 4); + if (n > 0) + return n / 4; + + for (n = 0; n < nres; n++) { + if (!dt_xlate_reg(node, n, &xaddr, NULL)) + break; + + addr[n] = (void *)xaddr; + } + + return n; +} + diff --git a/arch/powerpc/boot/dts/bamboo.dts b/arch/powerpc/boot/dts/bamboo.dts index 7dc37c9a7446..ba2521bdaab1 100644 --- a/arch/powerpc/boot/dts/bamboo.dts +++ b/arch/powerpc/boot/dts/bamboo.dts @@ -204,7 +204,6 @@ }; EMAC0: ethernet@ef600e00 { - linux,network-index = <0>; device_type = "network"; compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; interrupt-parent = <&UIC1>; @@ -225,7 +224,6 @@ }; EMAC1: ethernet@ef600f00 { - linux,network-index = <1>; device_type = "network"; compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; interrupt-parent = <&UIC1>; diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts new file mode 100644 index 000000000000..6f3d38a1554f --- /dev/null +++ b/arch/powerpc/boot/dts/canyonlands.dts @@ -0,0 +1,402 @@ +/* + * Device Tree Source for AMCC Canyonlands (460EX) + * + * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,canyonlands"; + compatible = "amcc,canyonlands"; + dcr-parent = <&/cpus/cpu@0>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,460EX"; + reg = <0>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <20>; + d-cache-line-size = <20>; + i-cache-size = <8000>; + d-cache-size = <8000>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-460ex","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-460ex","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0d0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1e 4 1f 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-460ex","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0e0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <a 4 b 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic-460ex","ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0f0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <10 4 11 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-460ex"; + dcr-reg = <00e 002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-460ex"; + dcr-reg = <00c 002>; + }; + + plb { + compatible = "ibm,plb-460ex", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: sdram { + compatible = "ibm,sdram-460ex", "ibm,sdram-405gp"; + dcr-reg = <010 2>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-460ex", "ibm,mcmal2"; + dcr-reg = <180 62>; + num-tx-chans = <2>; + num-rx-chans = <10>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-parent = <&UIC2>; + interrupts = < /*TXEOB*/ 6 4 + /*RXEOB*/ 7 4 + /*SERR*/ 3 4 + /*TXDE*/ 4 4 + /*RXDE*/ 5 4>; + }; + + POB0: opb { + compatible = "ibm,opb-460ex", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <b0000000 4 b0000000 50000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-460ex", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + interrupts = <6 4>; + interrupt-parent = <&UIC1>; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600300 8>; + virtual-reg = <ef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <1 4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600400 8>; + virtual-reg = <ef600400>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + UART2: serial@ef600500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600500 8>; + virtual-reg = <ef600500>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <1d 4>; + }; + + UART3: serial@ef600600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600600 8>; + virtual-reg = <ef600600>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <1e 4>; + }; + + IIC0: i2c@ef600700 { + compatible = "ibm,iic-460ex", "ibm,iic"; + reg = <ef600700 14>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + + IIC1: i2c@ef600800 { + compatible = "ibm,iic-460ex", "ibm,iic"; + reg = <ef600800 14>; + interrupt-parent = <&UIC0>; + interrupts = <3 4>; + }; + + ZMII0: emac-zmii@ef600d00 { + compatible = "ibm,zmii-460ex", "ibm,zmii"; + reg = <ef600d00 c>; + }; + + RGMII0: emac-rgmii@ef601500 { + compatible = "ibm,rgmii-460ex", "ibm,rgmii"; + reg = <ef601500 8>; + has-mdio; + }; + + TAH0: emac-tah@ef601350 { + compatible = "ibm,tah-460ex", "ibm,tah"; + reg = <ef601350 30>; + }; + + TAH1: emac-tah@ef601450 { + compatible = "ibm,tah-460ex", "ibm,tah"; + reg = <ef601450 30>; + }; + + EMAC0: ethernet@ef600e00 { + device_type = "network"; + compatible = "ibm,emac-460ex", "ibm,emac4"; + interrupt-parent = <&EMAC0>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC2 10 4 + /*Wake*/ 1 &UIC2 14 4>; + reg = <ef600e00 70>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <2328>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + tah-device = <&TAH0>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@ef600f00 { + device_type = "network"; + compatible = "ibm,emac-460ex", "ibm,emac4"; + interrupt-parent = <&EMAC1>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC2 11 4 + /*Wake*/ 1 &UIC2 15 4>; + reg = <ef600f00 70>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <8>; + cell-index = <1>; + max-frame-size = <2328>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + tah-device = <&TAH1>; + tah-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + }; + + PCIX0: pci@c0ec00000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pcix-460ex", "ibm,plb-pcix"; + primary; + large-inbound-windows; + enable-msi-hole; + reg = <c 0ec00000 8 /* Config space access */ + 0 0 0 /* no IACK cycles */ + c 0ed00000 4 /* Special cycles */ + c 0ec80000 100 /* Internal registers */ + c 0ec80100 fc>; /* Internal messaging registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 0000000d 80000000 0 80000000 + 01000000 0 00000000 0000000c 08000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* This drives busses 0 to 0x3f */ + bus-range = <0 3f>; + + /* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */ + interrupt-map-mask = <0000 0 0 0>; + interrupt-map = < 0000 0 0 0 &UIC1 0 8 >; + }; + + PCIE0: pciex@d00000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; + primary; + port = <0>; /* port number */ + reg = <d 00000000 20000000 /* Config space access */ + c 08010000 00001000>; /* Registers */ + dcr-reg = <100 020>; + sdr-base = <300>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 0000000e 00000000 0 80000000 + 01000000 0 00000000 0000000f 80000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* This drives busses 40 to 0x7f */ + bus-range = <40 7f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0000 0 0 7>; + interrupt-map = < + 0000 0 0 1 &UIC3 c 4 /* swizzled int A */ + 0000 0 0 2 &UIC3 d 4 /* swizzled int B */ + 0000 0 0 3 &UIC3 e 4 /* swizzled int C */ + 0000 0 0 4 &UIC3 f 4 /* swizzled int D */>; + }; + + PCIE1: pciex@d20000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; + primary; + port = <1>; /* port number */ + reg = <d 20000000 20000000 /* Config space access */ + c 08011000 00001000>; /* Registers */ + dcr-reg = <120 020>; + sdr-base = <340>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 0000000e 80000000 0 80000000 + 01000000 0 00000000 0000000f 80010000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* This drives busses 80 to 0xbf */ + bus-range = <80 bf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0000 0 0 7>; + interrupt-map = < + 0000 0 0 1 &UIC3 10 4 /* swizzled int A */ + 0000 0 0 2 &UIC3 11 4 /* swizzled int B */ + 0000 0 0 3 &UIC3 12 4 /* swizzled int C */ + 0000 0 0 4 &UIC3 13 4 /* swizzled int D */>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/ebony.dts b/arch/powerpc/boot/dts/ebony.dts index 0b000cb7ed8b..5079dc890e0e 100644 --- a/arch/powerpc/boot/dts/ebony.dts +++ b/arch/powerpc/boot/dts/ebony.dts @@ -241,7 +241,6 @@ }; EMAC0: ethernet@40000800 { - linux,network-index = <0>; device_type = "network"; compatible = "ibm,emac-440gp", "ibm,emac"; interrupt-parent = <&UIC1>; @@ -261,7 +260,6 @@ zmii-channel = <0>; }; EMAC1: ethernet@40000900 { - linux,network-index = <1>; device_type = "network"; compatible = "ibm,emac-440gp", "ibm,emac"; interrupt-parent = <&UIC1>; diff --git a/arch/powerpc/boot/dts/ep8248e.dts b/arch/powerpc/boot/dts/ep8248e.dts index 5d2fb76a72c1..756758fb5b7b 100644 --- a/arch/powerpc/boot/dts/ep8248e.dts +++ b/arch/powerpc/boot/dts/ep8248e.dts @@ -121,8 +121,7 @@ data@0 { compatible = "fsl,cpm-muram-data"; - reg = <0 0x1100 0x1140 - 0xec0 0x9800 0x800>; + reg = <0 0x2000 0x9800 0x800>; }; }; @@ -138,7 +137,7 @@ device_type = "serial"; compatible = "fsl,mpc8248-smc-uart", "fsl,cpm2-smc-uart"; - reg = <0x11a80 0x20 0x1100 0x40>; + reg = <0x11a80 0x20 0x87fc 2>; interrupts = <4 8>; interrupt-parent = <&PIC>; fsl,cpm-brg = <7>; diff --git a/arch/powerpc/boot/dts/ep88xc.dts b/arch/powerpc/boot/dts/ep88xc.dts index 02705f299790..ae57d6240120 100644 --- a/arch/powerpc/boot/dts/ep88xc.dts +++ b/arch/powerpc/boot/dts/ep88xc.dts @@ -2,7 +2,7 @@ * EP88xC Device Tree Source * * Copyright 2006 MontaVista Software, Inc. - * Copyright 2007 Freescale Semiconductor, Inc. + * Copyright 2007,2008 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -10,6 +10,7 @@ * option) any later version. */ +/dts-v1/; / { model = "EP88xC"; @@ -23,44 +24,44 @@ PowerPC,885@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <d#16>; - i-cache-line-size = <d#16>; - d-cache-size = <d#8192>; - i-cache-size = <d#8192>; + reg = <0x0>; + d-cache-line-size = <16>; + i-cache-line-size = <16>; + d-cache-size = <8192>; + i-cache-size = <8192>; timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; - interrupts = <f 2>; // decrementer interrupt + interrupts = <15 2>; // decrementer interrupt interrupt-parent = <&PIC>; }; }; memory { device_type = "memory"; - reg = <0 0>; + reg = <0x0 0x0>; }; localbus@fa200100 { compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus"; #address-cells = <2>; #size-cells = <1>; - reg = <fa200100 40>; + reg = <0xfa200100 0x40>; ranges = < - 0 0 fc000000 04000000 - 3 0 fa000000 01000000 + 0x0 0x0 0xfc000000 0x4000000 + 0x3 0x0 0xfa000000 0x1000000 >; flash@0,2000000 { compatible = "cfi-flash"; - reg = <0 2000000 2000000>; + reg = <0x0 0x2000000 0x2000000>; bank-width = <4>; device-width = <2>; }; board-control@3,400000 { - reg = <3 400000 10>; + reg = <0x3 0x400000 0x10>; compatible = "fsl,ep88xc-bcsr"; }; }; @@ -70,25 +71,25 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0 fa200000 00004000>; + ranges = <0x0 0xfa200000 0x4000>; bus-frequency = <0>; // Temporary -- will go away once kernel uses ranges for get_immrbase(). - reg = <fa200000 4000>; + reg = <0xfa200000 0x4000>; mdio@e00 { compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio"; - reg = <e00 188>; + reg = <0xe00 0x188>; #address-cells = <1>; #size-cells = <0>; PHY0: ethernet-phy@0 { - reg = <0>; + reg = <0x0>; device_type = "ethernet-phy"; }; PHY1: ethernet-phy@1 { - reg = <1>; + reg = <0x1>; device_type = "ethernet-phy"; }; }; @@ -97,7 +98,7 @@ device_type = "network"; compatible = "fsl,mpc885-fec-enet", "fsl,pq1-fec-enet"; - reg = <e00 188>; + reg = <0xe00 0x188>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <3 1>; interrupt-parent = <&PIC>; @@ -109,7 +110,7 @@ device_type = "network"; compatible = "fsl,mpc885-fec-enet", "fsl,pq1-fec-enet"; - reg = <1e00 188>; + reg = <0x1e00 0x188>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <7 1>; interrupt-parent = <&PIC>; @@ -120,7 +121,7 @@ PIC: interrupt-controller@0 { interrupt-controller; #interrupt-cells = <2>; - reg = <0 24>; + reg = <0x0 0x24>; compatible = "fsl,mpc885-pic", "fsl,pq1-pic"; }; @@ -130,29 +131,29 @@ #size-cells = <2>; compatible = "fsl,pq-pcmcia"; device_type = "pcmcia"; - reg = <80 80>; + reg = <0x80 0x80>; interrupt-parent = <&PIC>; - interrupts = <d 1>; + interrupts = <13 1>; }; cpm@9c0 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc885-cpm", "fsl,cpm1"; - command-proc = <9c0>; + command-proc = <0x9c0>; interrupts = <0>; // cpm error interrupt interrupt-parent = <&CPM_PIC>; - reg = <9c0 40>; + reg = <0x9c0 0x40>; ranges; muram@2000 { #address-cells = <1>; #size-cells = <1>; - ranges = <0 2000 2000>; + ranges = <0x0 0x2000 0x2000>; data@0 { compatible = "fsl,cpm-muram-data"; - reg = <0 1c00>; + reg = <0x0 0x1c00>; }; }; @@ -160,7 +161,7 @@ compatible = "fsl,mpc885-brg", "fsl,cpm1-brg", "fsl,cpm-brg"; - reg = <9f0 10>; + reg = <0x9f0 0x10>; }; CPM_PIC: interrupt-controller@930 { @@ -168,7 +169,7 @@ #interrupt-cells = <1>; interrupts = <5 2 0 2>; interrupt-parent = <&PIC>; - reg = <930 20>; + reg = <0x930 0x20>; compatible = "fsl,mpc885-cpm-pic", "fsl,cpm1-pic"; }; @@ -178,11 +179,11 @@ device_type = "serial"; compatible = "fsl,mpc885-smc-uart", "fsl,cpm1-smc-uart"; - reg = <a80 10 3e80 40>; + reg = <0xa80 0x10 0x3e80 0x40>; interrupts = <4>; interrupt-parent = <&CPM_PIC>; fsl,cpm-brg = <1>; - fsl,cpm-command = <0090>; + fsl,cpm-command = <0x90>; linux,planetcore-label = "SMC1"; }; @@ -191,11 +192,11 @@ device_type = "serial"; compatible = "fsl,mpc885-scc-uart", "fsl,cpm1-scc-uart"; - reg = <a20 20 3d00 80>; - interrupts = <1d>; + reg = <0xa20 0x20 0x3d00 0x80>; + interrupts = <29>; interrupt-parent = <&CPM_PIC>; fsl,cpm-brg = <2>; - fsl,cpm-command = <0040>; + fsl,cpm-command = <0x40>; linux,planetcore-label = "SCC2"; }; @@ -204,9 +205,9 @@ #size-cells = <0>; compatible = "fsl,mpc885-usb", "fsl,cpm1-usb"; - reg = <a00 18 1c00 80>; + reg = <0xa00 0x18 0x1c00 0x80>; interrupt-parent = <&CPM_PIC>; - interrupts = <1e>; + interrupts = <30>; fsl,cpm-command = <0000>; }; }; diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts new file mode 100644 index 000000000000..958a5ca53d35 --- /dev/null +++ b/arch/powerpc/boot/dts/glacier.dts @@ -0,0 +1,467 @@ +/* + * Device Tree Source for AMCC Glacier (460GT) + * + * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,glacier"; + compatible = "amcc,glacier", "amcc,canyonlands"; + dcr-parent = <&/cpus/cpu@0>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + ethernet2 = &EMAC2; + ethernet3 = &EMAC3; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,460GT"; + reg = <0>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <20>; + d-cache-line-size = <20>; + i-cache-size = <8000>; + d-cache-size = <8000>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0d0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1e 4 1f 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0e0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <a 4 b 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0f0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <10 4 11 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-460gt"; + dcr-reg = <00e 002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-460gt"; + dcr-reg = <00c 002>; + }; + + plb { + compatible = "ibm,plb-460gt", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: sdram { + compatible = "ibm,sdram-460gt", "ibm,sdram-405gp"; + dcr-reg = <010 2>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-460gt", "ibm,mcmal2"; + dcr-reg = <180 62>; + num-tx-chans = <4>; + num-rx-chans = <20>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-parent = <&UIC2>; + interrupts = < /*TXEOB*/ 6 4 + /*RXEOB*/ 7 4 + /*SERR*/ 3 4 + /*TXDE*/ 4 4 + /*RXDE*/ 5 4>; + desc-base-addr-high = <8>; + }; + + POB0: opb { + compatible = "ibm,opb-460gt", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <b0000000 4 b0000000 50000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-460gt", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + interrupts = <6 4>; + interrupt-parent = <&UIC1>; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600300 8>; + virtual-reg = <ef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <1 4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600400 8>; + virtual-reg = <ef600400>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + UART2: serial@ef600500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600500 8>; + virtual-reg = <ef600500>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <1d 4>; + }; + + UART3: serial@ef600600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600600 8>; + virtual-reg = <ef600600>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <1e 4>; + }; + + IIC0: i2c@ef600700 { + compatible = "ibm,iic-460gt", "ibm,iic"; + reg = <ef600700 14>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + + IIC1: i2c@ef600800 { + compatible = "ibm,iic-460gt", "ibm,iic"; + reg = <ef600800 14>; + interrupt-parent = <&UIC0>; + interrupts = <3 4>; + }; + + ZMII0: emac-zmii@ef600d00 { + compatible = "ibm,zmii-460gt", "ibm,zmii"; + reg = <ef600d00 c>; + }; + + RGMII0: emac-rgmii@ef601500 { + compatible = "ibm,rgmii-460gt", "ibm,rgmii"; + reg = <ef601500 8>; + has-mdio; + }; + + RGMII1: emac-rgmii@ef601600 { + compatible = "ibm,rgmii-460gt", "ibm,rgmii"; + reg = <ef601600 8>; + has-mdio; + }; + + TAH0: emac-tah@ef601350 { + compatible = "ibm,tah-460gt", "ibm,tah"; + reg = <ef601350 30>; + }; + + TAH1: emac-tah@ef601450 { + compatible = "ibm,tah-460gt", "ibm,tah"; + reg = <ef601450 30>; + }; + + EMAC0: ethernet@ef600e00 { + device_type = "network"; + compatible = "ibm,emac-460gt", "ibm,emac4"; + interrupt-parent = <&EMAC0>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC2 10 4 + /*Wake*/ 1 &UIC2 14 4>; + reg = <ef600e00 70>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <2328>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + tah-device = <&TAH0>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@ef600f00 { + device_type = "network"; + compatible = "ibm,emac-460gt", "ibm,emac4"; + interrupt-parent = <&EMAC1>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC2 11 4 + /*Wake*/ 1 &UIC2 15 4>; + reg = <ef600f00 70>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <8>; + cell-index = <1>; + max-frame-size = <2328>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + tah-device = <&TAH1>; + tah-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + + EMAC2: ethernet@ef601100 { + device_type = "network"; + compatible = "ibm,emac-460gt", "ibm,emac4"; + interrupt-parent = <&EMAC2>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC2 12 4 + /*Wake*/ 1 &UIC2 16 4>; + reg = <ef601100 70>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <2>; + mal-rx-channel = <10>; + cell-index = <2>; + max-frame-size = <2328>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <00000000>; + rgmii-device = <&RGMII1>; + rgmii-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + + EMAC3: ethernet@ef601200 { + device_type = "network"; + compatible = "ibm,emac-460gt", "ibm,emac4"; + interrupt-parent = <&EMAC3>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC2 13 4 + /*Wake*/ 1 &UIC2 17 4>; + reg = <ef601200 70>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <3>; + mal-rx-channel = <18>; + cell-index = <3>; + max-frame-size = <2328>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <00000000>; + rgmii-device = <&RGMII1>; + rgmii-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + }; + + PCIX0: pci@c0ec00000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pcix-460gt", "ibm,plb-pcix"; + primary; + large-inbound-windows; + enable-msi-hole; + reg = <c 0ec00000 8 /* Config space access */ + 0 0 0 /* no IACK cycles */ + c 0ed00000 4 /* Special cycles */ + c 0ec80000 100 /* Internal registers */ + c 0ec80100 fc>; /* Internal messaging registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 0000000d 80000000 0 80000000 + 01000000 0 00000000 0000000c 08000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* This drives busses 0 to 0x3f */ + bus-range = <0 3f>; + + /* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */ + interrupt-map-mask = <0000 0 0 0>; + interrupt-map = < 0000 0 0 0 &UIC1 0 8 >; + }; + + PCIE0: pciex@d00000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; + primary; + port = <0>; /* port number */ + reg = <d 00000000 20000000 /* Config space access */ + c 08010000 00001000>; /* Registers */ + dcr-reg = <100 020>; + sdr-base = <300>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 0000000e 00000000 0 80000000 + 01000000 0 00000000 0000000f 80000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* This drives busses 40 to 0x7f */ + bus-range = <40 7f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0000 0 0 7>; + interrupt-map = < + 0000 0 0 1 &UIC3 c 4 /* swizzled int A */ + 0000 0 0 2 &UIC3 d 4 /* swizzled int B */ + 0000 0 0 3 &UIC3 e 4 /* swizzled int C */ + 0000 0 0 4 &UIC3 f 4 /* swizzled int D */>; + }; + + PCIE1: pciex@d20000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; + primary; + port = <1>; /* port number */ + reg = <d 20000000 20000000 /* Config space access */ + c 08011000 00001000>; /* Registers */ + dcr-reg = <120 020>; + sdr-base = <340>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 0000000e 80000000 0 80000000 + 01000000 0 00000000 0000000f 80010000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* This drives busses 80 to 0xbf */ + bus-range = <80 bf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0000 0 0 7>; + interrupt-map = < + 0000 0 0 1 &UIC3 10 4 /* swizzled int A */ + 0000 0 0 2 &UIC3 11 4 /* swizzled int B */ + 0000 0 0 3 &UIC3 12 4 /* swizzled int C */ + 0000 0 0 4 &UIC3 13 4 /* swizzled int D */>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/haleakala.dts b/arch/powerpc/boot/dts/haleakala.dts index ae68fefc01b6..b5d95ac24dbf 100644 --- a/arch/powerpc/boot/dts/haleakala.dts +++ b/arch/powerpc/boot/dts/haleakala.dts @@ -12,7 +12,7 @@ #address-cells = <1>; #size-cells = <1>; model = "amcc,haleakala"; - compatible = "amcc,kilauea"; + compatible = "amcc,haleakala", "amcc,kilauea"; dcr-parent = <&/cpus/cpu@0>; aliases { @@ -218,7 +218,7 @@ mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts index fc86e5a3afc4..cc2873a531d2 100644 --- a/arch/powerpc/boot/dts/katmai.dts +++ b/arch/powerpc/boot/dts/katmai.dts @@ -212,7 +212,7 @@ mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "gmii"; diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts index 8baef61f31cd..48c9a6e71f1a 100644 --- a/arch/powerpc/boot/dts/kilauea.dts +++ b/arch/powerpc/boot/dts/kilauea.dts @@ -219,7 +219,7 @@ mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; @@ -247,7 +247,7 @@ mal-tx-channel = <1>; mal-rx-channel = <1>; cell-index = <1>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; diff --git a/arch/powerpc/boot/dts/ksi8560.dts b/arch/powerpc/boot/dts/ksi8560.dts new file mode 100644 index 000000000000..f869ce3ca0b7 --- /dev/null +++ b/arch/powerpc/boot/dts/ksi8560.dts @@ -0,0 +1,267 @@ +/* + * Device Tree Source for Emerson KSI8560 + * + * Author: Alexandr Smirnov <asmirnov@ru.mvista.com> + * + * Based on mpc8560ads.dts + * + * 2008 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + */ + +/dts-v1/; + +/ { + model = "KSI8560"; + compatible = "emerson,KSI8560"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8560@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x8000>; /* L1, 32K */ + i-cache-size = <0x8000>; /* L1, 32K */ + timebase-frequency = <0>; /* From U-boot */ + bus-frequency = <0>; /* From U-boot */ + clock-frequency = <0>; /* From U-boot */ + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; /* Fixed by bootwrapper */ + }; + + soc@fdf00000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x00000000 0xfdf00000 0x00100000>; + bus-frequency = <0>; /* Fixed by bootwrapper */ + + memory-controller@2000 { + compatible = "fsl,8540-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&MPIC>; + interrupts = <0x12 0x2>; + }; + + l2-cache-controller@20000 { + compatible = "fsl,8540-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <0x20>; /* 32 bytes */ + cache-size = <0x40000>; /* L2, 256K */ + interrupt-parent = <&MPIC>; + interrupts = <0x10 0x2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <0x2b 0x2>; + interrupt-parent = <&MPIC>; + dfsrr; + }; + + mdio@24520 { /* For TSECs */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + + PHY1: ethernet-phy@1 { + interrupt-parent = <&MPIC>; + reg = <0x1>; + device_type = "ethernet-phy"; + }; + + PHY2: ethernet-phy@2 { + interrupt-parent = <&MPIC>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + }; + + enet0: ethernet@24000 { + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + /* Mac address filled in by bootwrapper */ + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; + interrupt-parent = <&MPIC>; + phy-handle = <&PHY1>; + }; + + enet1: ethernet@25000 { + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + /* Mac address filled in by bootwrapper */ + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>; + interrupt-parent = <&MPIC>; + phy-handle = <&PHY2>; + }; + + MPIC: pic@40000 { + #address-cells = <0>; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0x40000 0x40000>; + device_type = "open-pic"; + }; + + cpm@919c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8560-cpm", "fsl,cpm2"; + reg = <0x919c0 0x30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0x0 0x4000 0x9000 0x2000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8560-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x919f0 0x10 0x915f0 0x10>; + clock-frequency = <165000000>; /* 166MHz */ + }; + + CPMPIC: pic@90c00 { + #address-cells = <0>; + #interrupt-cells = <2>; + interrupt-controller; + interrupts = <0x2e 0x2>; + interrupt-parent = <&MPIC>; + reg = <0x90c00 0x80>; + compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic"; + }; + + serial@91a00 { + device_type = "serial"; + compatible = "fsl,mpc8560-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <0x91a00 0x20 0x88000 0x100>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x800000>; + current-speed = <0x1c200>; + interrupts = <0x28 0x8>; + interrupt-parent = <&CPMPIC>; + }; + + serial@91a20 { + device_type = "serial"; + compatible = "fsl,mpc8560-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <0x91a20 0x20 0x88100 0x100>; + fsl,cpm-brg = <2>; + fsl,cpm-command = <0x4a00000>; + current-speed = <0x1c200>; + interrupts = <0x29 0x8>; + interrupt-parent = <&CPMPIC>; + }; + + mdio@90d00 { /* For FCCs */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,cpm2-mdio-bitbang"; + reg = <0x90d00 0x14>; + fsl,mdio-pin = <24>; + fsl,mdc-pin = <25>; + + PHY0: ethernet-phy@0 { + interrupt-parent = <&MPIC>; + reg = <0x0>; + device_type = "ethernet-phy"; + }; + }; + + enet2: ethernet@91300 { + device_type = "network"; + compatible = "fsl,mpc8560-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <0x91300 0x20 0x88400 0x100 0x91390 0x1>; + /* Mac address filled in by bootwrapper */ + local-mac-address = [ 00 00 00 00 00 00 ]; + fsl,cpm-command = <0x12000300>; + interrupts = <0x20 0x8>; + interrupt-parent = <&CPMPIC>; + phy-handle = <&PHY0>; + }; + }; + }; + + localbus@fdf05000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8560-localbus"; + reg = <0xfdf05000 0x68>; + + ranges = <0x0 0x0 0xe0000000 0x00800000 + 0x4 0x0 0xe8080000 0x00080000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <0x2>; + + partition@0 { + label = "Primary Kernel"; + reg = <0x0 0x180000>; + }; + partition@180000 { + label = "Primary Filesystem"; + reg = <0x180000 0x580000>; + }; + partition@700000 { + label = "Monitor"; + reg = <0x300000 0x100000>; + read-only; + }; + }; + + cpld@4,0 { + compatible = "emerson,KSI8560-cpld"; + reg = <0x4 0x0 0x80000>; + }; + }; + + + chosen { + linux,stdout-path = "/soc/cpm/serial@91a00"; + }; +}; diff --git a/arch/powerpc/boot/dts/kuroboxHD.dts b/arch/powerpc/boot/dts/kuroboxHD.dts index 446958854519..2e5a1a1812b6 100644 --- a/arch/powerpc/boot/dts/kuroboxHD.dts +++ b/arch/powerpc/boot/dts/kuroboxHD.dts @@ -7,6 +7,7 @@ * Based on sandpoint.dts * * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de> + * Copyright 2008 Freescale Semiconductor, Inc. * * This file is licensed under * the terms of the GNU General Public License version 2. This program @@ -17,6 +18,8 @@ XXXX add flash parts, rtc, ?? */ +/dts-v1/; + / { model = "KuroboxHD"; compatible = "linkstation"; @@ -35,19 +38,19 @@ XXXX add flash parts, rtc, ?? PowerPC,603e { /* Really 8241 */ device_type = "cpu"; - reg = <0>; - clock-frequency = <bebc200>; /* Fixed by bootloader */ - timebase-frequency = <1743000>; /* Fixed by bootloader */ + reg = <0x0>; + clock-frequency = <200000000>; /* Fixed by bootloader */ + timebase-frequency = <24391680>; /* Fixed by bootloader */ bus-frequency = <0>; /* Fixed by bootloader */ /* Following required by dtc but not used */ - i-cache-size = <4000>; - d-cache-size = <4000>; + i-cache-size = <0x4000>; + d-cache-size = <0x4000>; }; }; memory { device_type = "memory"; - reg = <00000000 04000000>; + reg = <0x0 0x4000000>; }; soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */ @@ -56,26 +59,26 @@ XXXX add flash parts, rtc, ?? device_type = "soc"; compatible = "mpc10x"; store-gathering = <0>; /* 0 == off, !0 == on */ - reg = <80000000 00100000>; - ranges = <80000000 80000000 70000000 /* pci mem space */ - fc000000 fc000000 00100000 /* EUMB */ - fe000000 fe000000 00c00000 /* pci i/o space */ - fec00000 fec00000 00300000 /* pci cfg regs */ - fef00000 fef00000 00100000>; /* pci iack */ + reg = <0x80000000 0x100000>; + ranges = <0x80000000 0x80000000 0x70000000 /* pci mem space */ + 0xfc000000 0xfc000000 0x100000 /* EUMB */ + 0xfe000000 0xfe000000 0xc00000 /* pci i/o space */ + 0xfec00000 0xfec00000 0x300000 /* pci cfg regs */ + 0xfef00000 0xfef00000 0x100000>; /* pci iack */ i2c@80003000 { #address-cells = <1>; #size-cells = <0>; cell-index = <0>; compatible = "fsl-i2c"; - reg = <80003000 1000>; + reg = <0x80003000 0x1000>; interrupts = <5 2>; interrupt-parent = <&mpic>; rtc@32 { device_type = "rtc"; compatible = "ricoh,rs5c372a"; - reg = <32>; + reg = <0x32>; }; }; @@ -83,9 +86,9 @@ XXXX add flash parts, rtc, ?? cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <80004500 8>; - clock-frequency = <5d08d88>; - current-speed = <2580>; + reg = <0x80004500 0x8>; + clock-frequency = <97553800>; + current-speed = <9600>; interrupts = <9 0>; interrupt-parent = <&mpic>; }; @@ -94,10 +97,10 @@ XXXX add flash parts, rtc, ?? cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <80004600 8>; - clock-frequency = <5d08d88>; - current-speed = <e100>; - interrupts = <a 0>; + reg = <0x80004600 0x8>; + clock-frequency = <97553800>; + current-speed = <57600>; + interrupts = <10 0>; interrupt-parent = <&mpic>; }; @@ -107,7 +110,7 @@ XXXX add flash parts, rtc, ?? device_type = "open-pic"; compatible = "chrp,open-pic"; interrupt-controller; - reg = <80040000 40000>; + reg = <0x80040000 0x40000>; }; pci0: pci@fec00000 { @@ -116,29 +119,29 @@ XXXX add flash parts, rtc, ?? #interrupt-cells = <1>; device_type = "pci"; compatible = "mpc10x-pci"; - reg = <fec00000 400000>; - ranges = <01000000 0 0 fe000000 0 00c00000 - 02000000 0 80000000 80000000 0 70000000>; - bus-range = <0 ff>; - clock-frequency = <7f28155>; + reg = <0xfec00000 0x400000>; + ranges = <0x1000000 0x0 0x0 0xfe000000 0x0 0xc00000 + 0x2000000 0x0 0x80000000 0x80000000 0x0 0x70000000>; + bus-range = <0 255>; + clock-frequency = <133333333>; interrupt-parent = <&mpic>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 11 - IRQ0 ETH */ - 5800 0 0 1 &mpic 0 1 - 5800 0 0 2 &mpic 1 1 - 5800 0 0 3 &mpic 2 1 - 5800 0 0 4 &mpic 3 1 + 0x5800 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x5800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x5800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x5800 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 12 - IRQ1 IDE0 */ - 6000 0 0 1 &mpic 1 1 - 6000 0 0 2 &mpic 2 1 - 6000 0 0 3 &mpic 3 1 - 6000 0 0 4 &mpic 0 1 + 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x6000 0x0 0x0 0x4 &mpic 0x0 0x1 /* IDSEL 14 - IRQ3 USB2.0 */ - 7000 0 0 1 &mpic 3 1 - 7000 0 0 2 &mpic 3 1 - 7000 0 0 3 &mpic 3 1 - 7000 0 0 4 &mpic 3 1 + 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x4 &mpic 0x3 0x1 >; }; }; diff --git a/arch/powerpc/boot/dts/kuroboxHG.dts b/arch/powerpc/boot/dts/kuroboxHG.dts index 8443c85b7b30..e4916e69ad31 100644 --- a/arch/powerpc/boot/dts/kuroboxHG.dts +++ b/arch/powerpc/boot/dts/kuroboxHG.dts @@ -7,6 +7,7 @@ * Based on sandpoint.dts * * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de> + * Copyright 2008 Freescale Semiconductor, Inc. * * This file is licensed under * the terms of the GNU General Public License version 2. This program @@ -17,6 +18,8 @@ XXXX add flash parts, rtc, ?? */ +/dts-v1/; + / { model = "KuroboxHG"; compatible = "linkstation"; @@ -35,19 +38,19 @@ XXXX add flash parts, rtc, ?? PowerPC,603e { /* Really 8241 */ device_type = "cpu"; - reg = <0>; - clock-frequency = <fdad680>; /* Fixed by bootloader */ - timebase-frequency = <1F04000>; /* Fixed by bootloader */ + reg = <0x0>; + clock-frequency = <266000000>; /* Fixed by bootloader */ + timebase-frequency = <32522240>; /* Fixed by bootloader */ bus-frequency = <0>; /* Fixed by bootloader */ /* Following required by dtc but not used */ - i-cache-size = <4000>; - d-cache-size = <4000>; + i-cache-size = <0x4000>; + d-cache-size = <0x4000>; }; }; memory { device_type = "memory"; - reg = <00000000 08000000>; + reg = <0x0 0x8000000>; }; soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */ @@ -56,26 +59,26 @@ XXXX add flash parts, rtc, ?? device_type = "soc"; compatible = "mpc10x"; store-gathering = <0>; /* 0 == off, !0 == on */ - reg = <80000000 00100000>; - ranges = <80000000 80000000 70000000 /* pci mem space */ - fc000000 fc000000 00100000 /* EUMB */ - fe000000 fe000000 00c00000 /* pci i/o space */ - fec00000 fec00000 00300000 /* pci cfg regs */ - fef00000 fef00000 00100000>; /* pci iack */ + reg = <0x80000000 0x100000>; + ranges = <0x80000000 0x80000000 0x70000000 /* pci mem space */ + 0xfc000000 0xfc000000 0x100000 /* EUMB */ + 0xfe000000 0xfe000000 0xc00000 /* pci i/o space */ + 0xfec00000 0xfec00000 0x300000 /* pci cfg regs */ + 0xfef00000 0xfef00000 0x100000>; /* pci iack */ i2c@80003000 { #address-cells = <1>; #size-cells = <0>; cell-index = <0>; compatible = "fsl-i2c"; - reg = <80003000 1000>; + reg = <0x80003000 0x1000>; interrupts = <5 2>; interrupt-parent = <&mpic>; rtc@32 { device_type = "rtc"; compatible = "ricoh,rs5c372a"; - reg = <32>; + reg = <0x32>; }; }; @@ -83,9 +86,9 @@ XXXX add flash parts, rtc, ?? cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <80004500 8>; - clock-frequency = <7c044a8>; - current-speed = <2580>; + reg = <0x80004500 0x8>; + clock-frequency = <130041000>; + current-speed = <9600>; interrupts = <9 0>; interrupt-parent = <&mpic>; }; @@ -94,10 +97,10 @@ XXXX add flash parts, rtc, ?? cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <80004600 8>; - clock-frequency = <7c044a8>; - current-speed = <e100>; - interrupts = <a 0>; + reg = <0x80004600 0x8>; + clock-frequency = <130041000>; + current-speed = <57600>; + interrupts = <10 0>; interrupt-parent = <&mpic>; }; @@ -107,7 +110,7 @@ XXXX add flash parts, rtc, ?? device_type = "open-pic"; compatible = "chrp,open-pic"; interrupt-controller; - reg = <80040000 40000>; + reg = <0x80040000 0x40000>; }; pci0: pci@fec00000 { @@ -116,29 +119,29 @@ XXXX add flash parts, rtc, ?? #interrupt-cells = <1>; device_type = "pci"; compatible = "mpc10x-pci"; - reg = <fec00000 400000>; - ranges = <01000000 0 0 fe000000 0 00c00000 - 02000000 0 80000000 80000000 0 70000000>; - bus-range = <0 ff>; - clock-frequency = <7f28155>; + reg = <0xfec00000 0x400000>; + ranges = <0x1000000 0x0 0x0 0xfe000000 0x0 0xc00000 + 0x2000000 0x0 0x80000000 0x80000000 0x0 0x70000000>; + bus-range = <0 255>; + clock-frequency = <133333333>; interrupt-parent = <&mpic>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 11 - IRQ0 ETH */ - 5800 0 0 1 &mpic 0 1 - 5800 0 0 2 &mpic 1 1 - 5800 0 0 3 &mpic 2 1 - 5800 0 0 4 &mpic 3 1 + 0x5800 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x5800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x5800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x5800 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 12 - IRQ1 IDE0 */ - 6000 0 0 1 &mpic 1 1 - 6000 0 0 2 &mpic 2 1 - 6000 0 0 3 &mpic 3 1 - 6000 0 0 4 &mpic 0 1 + 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x6000 0x0 0x0 0x4 &mpic 0x0 0x1 /* IDSEL 14 - IRQ3 USB2.0 */ - 7000 0 0 1 &mpic 3 1 - 7000 0 0 2 &mpic 3 1 - 7000 0 0 3 &mpic 3 1 - 7000 0 0 4 &mpic 3 1 + 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x4 &mpic 0x3 0x1 >; }; }; diff --git a/arch/powerpc/boot/dts/makalu.dts b/arch/powerpc/boot/dts/makalu.dts index 710c01168179..84cc5e72ddd8 100644 --- a/arch/powerpc/boot/dts/makalu.dts +++ b/arch/powerpc/boot/dts/makalu.dts @@ -219,7 +219,7 @@ mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; @@ -247,7 +247,7 @@ mal-tx-channel = <1>; mal-rx-channel = <1>; cell-index = <1>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts index 8fb542387436..4936349b87cd 100644 --- a/arch/powerpc/boot/dts/mpc7448hpc2.dts +++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts @@ -1,7 +1,7 @@ /* * MPC7448HPC2 (Taiga) board Device Tree Source * - * Copyright 2006 Freescale Semiconductor Inc. + * Copyright 2006, 2008 Freescale Semiconductor Inc. * 2006 Roy Zang <Roy Zang at freescale.com>. * * This program is free software; you can redistribute it and/or modify it @@ -10,6 +10,7 @@ * option) any later version. */ +/dts-v1/; / { model = "mpc7448hpc2"; @@ -23,11 +24,11 @@ PowerPC,7448@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K bytes - i-cache-size = <8000>; // L1, 32K bytes + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K bytes + i-cache-size = <0x8000>; // L1, 32K bytes timebase-frequency = <0>; // 33 MHz, from uboot clock-frequency = <0>; // From U-Boot bus-frequency = <0>; // From U-Boot @@ -36,7 +37,7 @@ memory { device_type = "memory"; - reg = <00000000 20000000 // DDR2 512M at 0 + reg = <0x0 0x20000000 // DDR2 512M at 0 >; }; @@ -44,14 +45,14 @@ #address-cells = <1>; #size-cells = <1>; device_type = "tsi-bridge"; - ranges = <00000000 c0000000 00010000>; - reg = <c0000000 00010000>; + ranges = <0x0 0xc0000000 0x10000>; + reg = <0xc0000000 0x10000>; bus-frequency = <0>; i2c@7000 { interrupt-parent = <&mpic>; - interrupts = <E 0>; - reg = <7000 400>; + interrupts = <14 0>; + reg = <0x7000 0x400>; device_type = "i2c"; compatible = "tsi108-i2c"; }; @@ -59,20 +60,20 @@ MDIO: mdio@6000 { device_type = "mdio"; compatible = "tsi108-mdio"; - reg = <6000 50>; + reg = <0x6000 0x50>; #address-cells = <1>; #size-cells = <0>; phy8: ethernet-phy@8 { interrupt-parent = <&mpic>; interrupts = <2 1>; - reg = <8>; + reg = <0x8>; }; phy9: ethernet-phy@9 { interrupt-parent = <&mpic>; interrupts = <2 1>; - reg = <9>; + reg = <0x9>; }; }; @@ -82,9 +83,9 @@ #size-cells = <0>; device_type = "network"; compatible = "tsi108-ethernet"; - reg = <6000 200>; + reg = <0x6000 0x200>; address = [ 00 06 D2 00 00 01 ]; - interrupts = <10 2>; + interrupts = <16 2>; interrupt-parent = <&mpic>; mdio-handle = <&MDIO>; phy-handle = <&phy8>; @@ -96,9 +97,9 @@ #size-cells = <0>; device_type = "network"; compatible = "tsi108-ethernet"; - reg = <6400 200>; + reg = <0x6400 0x200>; address = [ 00 06 D2 00 00 02 ]; - interrupts = <11 2>; + interrupts = <17 2>; interrupt-parent = <&mpic>; mdio-handle = <&MDIO>; phy-handle = <&phy9>; @@ -107,18 +108,18 @@ serial@7808 { device_type = "serial"; compatible = "ns16550"; - reg = <7808 200>; - clock-frequency = <3f6b5a00>; - interrupts = <c 0>; + reg = <0x7808 0x200>; + clock-frequency = <1064000000>; + interrupts = <12 0>; interrupt-parent = <&mpic>; }; serial@7c08 { device_type = "serial"; compatible = "ns16550"; - reg = <7c08 200>; - clock-frequency = <3f6b5a00>; - interrupts = <d 0>; + reg = <0x7c08 0x200>; + clock-frequency = <1064000000>; + interrupts = <13 0>; interrupt-parent = <&mpic>; }; @@ -127,7 +128,7 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <7400 400>; + reg = <0x7400 0x400>; compatible = "chrp,open-pic"; device_type = "open-pic"; big-endian; @@ -138,39 +139,39 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <1000 1000>; + reg = <0x1000 0x1000>; bus-range = <0 0>; - ranges = <02000000 0 e0000000 e0000000 0 1A000000 - 01000000 0 00000000 fa000000 0 00010000>; - clock-frequency = <7f28154>; + ranges = <0x2000000 0x0 0xe0000000 0xe0000000 0x0 0x1a000000 + 0x1000000 0x0 0x0 0xfa000000 0x0 0x10000>; + clock-frequency = <133333332>; interrupt-parent = <&mpic>; - interrupts = <17 2>; - interrupt-map-mask = <f800 0 0 7>; + interrupts = <23 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x11 */ - 0800 0 0 1 &RT0 24 0 - 0800 0 0 2 &RT0 25 0 - 0800 0 0 3 &RT0 26 0 - 0800 0 0 4 &RT0 27 0 + 0x800 0x0 0x0 0x1 &RT0 0x24 0x0 + 0x800 0x0 0x0 0x2 &RT0 0x25 0x0 + 0x800 0x0 0x0 0x3 &RT0 0x26 0x0 + 0x800 0x0 0x0 0x4 &RT0 0x27 0x0 /* IDSEL 0x12 */ - 1000 0 0 1 &RT0 25 0 - 1000 0 0 2 &RT0 26 0 - 1000 0 0 3 &RT0 27 0 - 1000 0 0 4 &RT0 24 0 + 0x1000 0x0 0x0 0x1 &RT0 0x25 0x0 + 0x1000 0x0 0x0 0x2 &RT0 0x26 0x0 + 0x1000 0x0 0x0 0x3 &RT0 0x27 0x0 + 0x1000 0x0 0x0 0x4 &RT0 0x24 0x0 /* IDSEL 0x13 */ - 1800 0 0 1 &RT0 26 0 - 1800 0 0 2 &RT0 27 0 - 1800 0 0 3 &RT0 24 0 - 1800 0 0 4 &RT0 25 0 + 0x1800 0x0 0x0 0x1 &RT0 0x26 0x0 + 0x1800 0x0 0x0 0x2 &RT0 0x27 0x0 + 0x1800 0x0 0x0 0x3 &RT0 0x24 0x0 + 0x1800 0x0 0x0 0x4 &RT0 0x25 0x0 /* IDSEL 0x14 */ - 2000 0 0 1 &RT0 27 0 - 2000 0 0 2 &RT0 24 0 - 2000 0 0 3 &RT0 25 0 - 2000 0 0 4 &RT0 26 0 + 0x2000 0x0 0x0 0x1 &RT0 0x27 0x0 + 0x2000 0x0 0x0 0x2 &RT0 0x24 0x0 + 0x2000 0x0 0x0 0x3 &RT0 0x25 0x0 + 0x2000 0x0 0x0 0x4 &RT0 0x26 0x0 >; RT0: router@1180 { @@ -180,7 +181,7 @@ #address-cells = <0>; #interrupt-cells = <2>; big-endian; - interrupts = <17 2>; + interrupts = <23 2>; interrupt-parent = <&mpic>; }; }; diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts index 7285ca1325fd..46e2da30c3dd 100644 --- a/arch/powerpc/boot/dts/mpc8272ads.dts +++ b/arch/powerpc/boot/dts/mpc8272ads.dts @@ -1,7 +1,7 @@ /* * MPC8272 ADS Device Tree Source * - * Copyright 2005 Freescale Semiconductor Inc. + * Copyright 2005,2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,6 +9,8 @@ * option) any later version. */ +/dts-v1/; + / { model = "MPC8272ADS"; compatible = "fsl,mpc8272ads"; @@ -21,11 +23,11 @@ PowerPC,8272@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <d#32>; - i-cache-line-size = <d#32>; - d-cache-size = <d#16384>; - i-cache-size = <d#16384>; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <16384>; + i-cache-size = <16384>; timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; @@ -34,7 +36,7 @@ memory { device_type = "memory"; - reg = <0 0>; + reg = <0x0 0x0>; }; localbus@f0010100 { @@ -42,21 +44,21 @@ "fsl,pq2-localbus"; #address-cells = <2>; #size-cells = <1>; - reg = <f0010100 40>; + reg = <0xf0010100 0x40>; - ranges = <0 0 fe000000 02000000 - 1 0 f4500000 00008000 - 3 0 f8200000 00008000>; + ranges = <0x0 0x0 0xfe000000 0x2000000 + 0x1 0x0 0xf4500000 0x8000 + 0x3 0x0 0xf8200000 0x8000>; flash@0,0 { compatible = "jedec-flash"; - reg = <0 0 2000000>; + reg = <0x0 0x0 0x2000000>; bank-width = <4>; device-width = <1>; }; board-control@1,0 { - reg = <1 0 20>; + reg = <0x1 0x0 0x20>; compatible = "fsl,mpc8272ads-bcsr"; }; @@ -65,46 +67,46 @@ "fsl,pq2ads-pci-pic"; #interrupt-cells = <1>; interrupt-controller; - reg = <3 0 8>; + reg = <0x3 0x0 0x8>; interrupt-parent = <&PIC>; - interrupts = <14 8>; + interrupts = <20 8>; }; }; pci@f0010800 { device_type = "pci"; - reg = <f0010800 10c f00101ac 8 f00101c4 8>; + reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>; compatible = "fsl,mpc8272-pci", "fsl,pq2-pci"; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - clock-frequency = <d#66666666>; - interrupt-map-mask = <f800 0 0 7>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x16 */ - b000 0 0 1 &PCI_PIC 0 - b000 0 0 2 &PCI_PIC 1 - b000 0 0 3 &PCI_PIC 2 - b000 0 0 4 &PCI_PIC 3 + 0xb000 0x0 0x0 0x1 &PCI_PIC 0 + 0xb000 0x0 0x0 0x2 &PCI_PIC 1 + 0xb000 0x0 0x0 0x3 &PCI_PIC 2 + 0xb000 0x0 0x0 0x4 &PCI_PIC 3 /* IDSEL 0x17 */ - b800 0 0 1 &PCI_PIC 4 - b800 0 0 2 &PCI_PIC 5 - b800 0 0 3 &PCI_PIC 6 - b800 0 0 4 &PCI_PIC 7 + 0xb800 0x0 0x0 0x1 &PCI_PIC 4 + 0xb800 0x0 0x0 0x2 &PCI_PIC 5 + 0xb800 0x0 0x0 0x3 &PCI_PIC 6 + 0xb800 0x0 0x0 0x4 &PCI_PIC 7 /* IDSEL 0x18 */ - c000 0 0 1 &PCI_PIC 8 - c000 0 0 2 &PCI_PIC 9 - c000 0 0 3 &PCI_PIC a - c000 0 0 4 &PCI_PIC b>; + 0xc000 0x0 0x0 0x1 &PCI_PIC 8 + 0xc000 0x0 0x0 0x2 &PCI_PIC 9 + 0xc000 0x0 0x0 0x3 &PCI_PIC 10 + 0xc000 0x0 0x0 0x4 &PCI_PIC 11>; interrupt-parent = <&PIC>; - interrupts = <12 8>; - ranges = <42000000 0 80000000 80000000 0 20000000 - 02000000 0 a0000000 a0000000 0 20000000 - 01000000 0 00000000 f6000000 0 02000000>; + interrupts = <18 8>; + ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xf6000000 0x0 0x2000000>; }; soc@f0000000 { @@ -112,26 +114,26 @@ #size-cells = <1>; device_type = "soc"; compatible = "fsl,mpc8272", "fsl,pq2-soc"; - ranges = <00000000 f0000000 00053000>; + ranges = <0x0 0xf0000000 0x53000>; // Temporary -- will go away once kernel uses ranges for get_immrbase(). - reg = <f0000000 00053000>; + reg = <0xf0000000 0x53000>; cpm@119c0 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc8272-cpm", "fsl,cpm2"; - reg = <119c0 30>; + reg = <0x119c0 0x30>; ranges; muram@0 { #address-cells = <1>; #size-cells = <1>; - ranges = <0 0 10000>; + ranges = <0x0 0x0 0x10000>; data@0 { compatible = "fsl,cpm-muram-data"; - reg = <0 2000 9800 800>; + reg = <0x0 0x2000 0x9800 0x800>; }; }; @@ -139,29 +141,29 @@ compatible = "fsl,mpc8272-brg", "fsl,cpm2-brg", "fsl,cpm-brg"; - reg = <119f0 10 115f0 10>; + reg = <0x119f0 0x10 0x115f0 0x10>; }; serial@11a00 { device_type = "serial"; compatible = "fsl,mpc8272-scc-uart", "fsl,cpm2-scc-uart"; - reg = <11a00 20 8000 100>; - interrupts = <28 8>; + reg = <0x11a00 0x20 0x8000 0x100>; + interrupts = <40 8>; interrupt-parent = <&PIC>; fsl,cpm-brg = <1>; - fsl,cpm-command = <00800000>; + fsl,cpm-command = <0x800000>; }; serial@11a60 { device_type = "serial"; compatible = "fsl,mpc8272-scc-uart", "fsl,cpm2-scc-uart"; - reg = <11a60 20 8300 100>; - interrupts = <2b 8>; + reg = <0x11a60 0x20 0x8300 0x100>; + interrupts = <43 8>; interrupt-parent = <&PIC>; fsl,cpm-brg = <4>; - fsl,cpm-command = <0ce00000>; + fsl,cpm-command = <0xce00000>; }; mdio@10d40 { @@ -169,23 +171,23 @@ compatible = "fsl,mpc8272ads-mdio-bitbang", "fsl,mpc8272-mdio-bitbang", "fsl,cpm2-mdio-bitbang"; - reg = <10d40 14>; + reg = <0x10d40 0x14>; #address-cells = <1>; #size-cells = <0>; - fsl,mdio-pin = <12>; - fsl,mdc-pin = <13>; + fsl,mdio-pin = <18>; + fsl,mdc-pin = <19>; PHY0: ethernet-phy@0 { interrupt-parent = <&PIC>; - interrupts = <17 8>; - reg = <0>; + interrupts = <23 8>; + reg = <0x0>; device_type = "ethernet-phy"; }; PHY1: ethernet-phy@1 { interrupt-parent = <&PIC>; - interrupts = <17 8>; - reg = <3>; + interrupts = <23 8>; + reg = <0x3>; device_type = "ethernet-phy"; }; }; @@ -194,33 +196,33 @@ device_type = "network"; compatible = "fsl,mpc8272-fcc-enet", "fsl,cpm2-fcc-enet"; - reg = <11300 20 8400 100 11390 1>; + reg = <0x11300 0x20 0x8400 0x100 0x11390 0x1>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <20 8>; + interrupts = <32 8>; interrupt-parent = <&PIC>; phy-handle = <&PHY0>; linux,network-index = <0>; - fsl,cpm-command = <12000300>; + fsl,cpm-command = <0x12000300>; }; ethernet@11320 { device_type = "network"; compatible = "fsl,mpc8272-fcc-enet", "fsl,cpm2-fcc-enet"; - reg = <11320 20 8500 100 113b0 1>; + reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <21 8>; + interrupts = <33 8>; interrupt-parent = <&PIC>; phy-handle = <&PHY1>; linux,network-index = <1>; - fsl,cpm-command = <16200300>; + fsl,cpm-command = <0x16200300>; }; }; PIC: interrupt-controller@10c00 { #interrupt-cells = <2>; interrupt-controller; - reg = <10c00 80>; + reg = <0x10c00 0x80>; compatible = "fsl,mpc8272-pic", "fsl,cpm2-pic"; }; @@ -232,14 +234,14 @@ "fsl,talitos-sec2", "fsl,talitos", "talitos"; - reg = <30000 10000>; - interrupts = <b 8>; + reg = <0x30000 0x10000>; + interrupts = <11 8>; interrupt-parent = <&PIC>; num-channels = <4>; - channel-fifo-len = <18>; - exec-units-mask = <0000007e>; + channel-fifo-len = <24>; + exec-units-mask = <0x7e>; /* desc mask is for rev1.x, we need runtime fixup for >=2.x */ - descriptor-types-mask = <01010ebf>; + descriptor-types-mask = <0x1010ebf>; }; }; diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts index 9bb408371bcd..539e02fb3526 100644 --- a/arch/powerpc/boot/dts/mpc832x_mds.dts +++ b/arch/powerpc/boot/dts/mpc832x_mds.dts @@ -255,9 +255,7 @@ enet0: ucc@2200 { device_type = "network"; compatible = "ucc_geth"; - model = "UCC"; cell-index = <3>; - device-id = <3>; reg = <0x2200 0x200>; interrupts = <34>; interrupt-parent = <&qeic>; @@ -271,9 +269,7 @@ enet1: ucc@3200 { device_type = "network"; compatible = "ucc_geth"; - model = "UCC"; cell-index = <4>; - device-id = <4>; reg = <0x3200 0x200>; interrupts = <35>; interrupt-parent = <&qeic>; @@ -287,8 +283,7 @@ ucc@2400 { device_type = "serial"; compatible = "ucc_uart"; - model = "UCC"; - device-id = <5>; /* The UCC number, 1-7*/ + cell-index = <5>; /* The UCC number, 1-7*/ port-number = <0>; /* Which ttyQEx device */ soft-uart; /* We need Soft-UART */ reg = <0x2400 0x200>; diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts index 94f93d209de8..179c81c6a7ac 100644 --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts @@ -208,9 +208,7 @@ enet0: ucc@3000 { device_type = "network"; compatible = "ucc_geth"; - model = "UCC"; cell-index = <2>; - device-id = <2>; reg = <0x3000 0x200>; interrupts = <33>; interrupt-parent = <&qeic>; @@ -224,9 +222,7 @@ enet1: ucc@2200 { device_type = "network"; compatible = "ucc_geth"; - model = "UCC"; cell-index = <3>; - device-id = <3>; reg = <0x2200 0x200>; interrupts = <34>; interrupt-parent = <&qeic>; diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts index 55f03e8dc97f..8160ff24e87e 100644 --- a/arch/powerpc/boot/dts/mpc836x_mds.dts +++ b/arch/powerpc/boot/dts/mpc836x_mds.dts @@ -257,9 +257,7 @@ enet0: ucc@2000 { device_type = "network"; compatible = "ucc_geth"; - model = "UCC"; cell-index = <1>; - device-id = <1>; reg = <0x2000 0x200>; interrupts = <32>; interrupt-parent = <&qeic>; @@ -274,9 +272,7 @@ enet1: ucc@3000 { device_type = "network"; compatible = "ucc_geth"; - model = "UCC"; cell-index = <2>; - device-id = <2>; reg = <0x3000 0x200>; interrupts = <33>; interrupt-parent = <&qeic>; diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts index 975248491b7b..18033ed0b535 100644 --- a/arch/powerpc/boot/dts/mpc8540ads.dts +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -1,7 +1,7 @@ /* * MPC8540 ADS Device Tree Source * - * Copyright 2006 Freescale Semiconductor Inc. + * Copyright 2006, 2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,6 +9,7 @@ * option) any later version. */ +/dts-v1/; / { model = "MPC8540ADS"; @@ -31,11 +32,11 @@ PowerPC,8540@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K timebase-frequency = <0>; // 33 MHz, from uboot bus-frequency = <0>; // 166 MHz clock-frequency = <0>; // 825 MHz, from uboot @@ -44,31 +45,31 @@ memory { device_type = "memory"; - reg = <00000000 08000000>; // 128M at 0x0 + reg = <0x0 0x8000000>; // 128M at 0x0 }; soc8540@e0000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = <e0000000 00100000>; // CCSRBAR 1M + ranges = <0x0 0xe0000000 0x100000>; + reg = <0xe0000000 0x100000>; // CCSRBAR 1M bus-frequency = <0>; memory-controller@2000 { compatible = "fsl,8540-memory-controller"; - reg = <2000 1000>; + reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; - interrupts = <12 2>; + interrupts = <18 2>; }; l2-cache-controller@20000 { compatible = "fsl,8540-l2-cache-controller"; - reg = <20000 1000>; - cache-line-size = <20>; // 32 bytes - cache-size = <40000>; // L2, 256K + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2, 256K interrupt-parent = <&mpic>; - interrupts = <10 2>; + interrupts = <16 2>; }; i2c@3000 { @@ -76,8 +77,8 @@ #size-cells = <0>; cell-index = <0>; compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = <2b 2>; + reg = <0x3000 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -86,24 +87,24 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-mdio"; - reg = <24520 20>; + reg = <0x24520 0x20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <0>; + reg = <0x0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <1>; + reg = <0x1>; device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; interrupts = <7 1>; - reg = <3>; + reg = <0x3>; device_type = "ethernet-phy"; }; }; @@ -113,9 +114,9 @@ device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <24000 1000>; + reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1d 2 1e 2 22 2>; + interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; }; @@ -125,9 +126,9 @@ device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <25000 1000>; + reg = <0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <23 2 24 2 28 2>; + interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; }; @@ -137,9 +138,9 @@ device_type = "network"; model = "FEC"; compatible = "gianfar"; - reg = <26000 1000>; + reg = <0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2>; + interrupts = <41 2>; interrupt-parent = <&mpic>; phy-handle = <&phy3>; }; @@ -148,9 +149,9 @@ cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; // reg base, size + reg = <0x4500 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; @@ -158,9 +159,9 @@ cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <4600 100>; // reg base, size + reg = <0x4600 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; mpic: pic@40000 { @@ -168,7 +169,7 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <40000 40000>; + reg = <0x40000 0x40000>; compatible = "chrp,open-pic"; device_type = "open-pic"; big-endian; @@ -177,90 +178,90 @@ pci0: pci@e0008000 { cell-index = <0>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x02 */ - 1000 0 0 1 &mpic 1 1 - 1000 0 0 2 &mpic 2 1 - 1000 0 0 3 &mpic 3 1 - 1000 0 0 4 &mpic 4 1 + 0x1000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x1000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x1000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x1000 0x0 0x0 0x4 &mpic 0x4 0x1 /* IDSEL 0x03 */ - 1800 0 0 1 &mpic 4 1 - 1800 0 0 2 &mpic 1 1 - 1800 0 0 3 &mpic 2 1 - 1800 0 0 4 &mpic 3 1 + 0x1800 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x1800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x1800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x1800 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x04 */ - 2000 0 0 1 &mpic 3 1 - 2000 0 0 2 &mpic 4 1 - 2000 0 0 3 &mpic 1 1 - 2000 0 0 4 &mpic 2 1 + 0x2000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x2000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x2000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x2000 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 0x05 */ - 2800 0 0 1 &mpic 2 1 - 2800 0 0 2 &mpic 3 1 - 2800 0 0 3 &mpic 4 1 - 2800 0 0 4 &mpic 1 1 + 0x2800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x2800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x2800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x2800 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x0c */ - 6000 0 0 1 &mpic 1 1 - 6000 0 0 2 &mpic 2 1 - 6000 0 0 3 &mpic 3 1 - 6000 0 0 4 &mpic 4 1 + 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x6000 0x0 0x0 0x4 &mpic 0x4 0x1 /* IDSEL 0x0d */ - 6800 0 0 1 &mpic 4 1 - 6800 0 0 2 &mpic 1 1 - 6800 0 0 3 &mpic 2 1 - 6800 0 0 4 &mpic 3 1 + 0x6800 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x6800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x6800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x6800 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x0e */ - 7000 0 0 1 &mpic 3 1 - 7000 0 0 2 &mpic 4 1 - 7000 0 0 3 &mpic 1 1 - 7000 0 0 4 &mpic 2 1 + 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x7000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x7000 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 0x0f */ - 7800 0 0 1 &mpic 2 1 - 7800 0 0 2 &mpic 3 1 - 7800 0 0 3 &mpic 4 1 - 7800 0 0 4 &mpic 1 1 + 0x7800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x7800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x7800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x7800 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x12 */ - 9000 0 0 1 &mpic 1 1 - 9000 0 0 2 &mpic 2 1 - 9000 0 0 3 &mpic 3 1 - 9000 0 0 4 &mpic 4 1 + 0x9000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 /* IDSEL 0x13 */ - 9800 0 0 1 &mpic 4 1 - 9800 0 0 2 &mpic 1 1 - 9800 0 0 3 &mpic 2 1 - 9800 0 0 4 &mpic 3 1 + 0x9800 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x9800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x9800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x9800 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x14 */ - a000 0 0 1 &mpic 3 1 - a000 0 0 2 &mpic 4 1 - a000 0 0 3 &mpic 1 1 - a000 0 0 4 &mpic 2 1 + 0xa000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0xa000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0xa000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0xa000 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 0x15 */ - a800 0 0 1 &mpic 2 1 - a800 0 0 2 &mpic 3 1 - a800 0 0 3 &mpic 4 1 - a800 0 0 4 &mpic 1 1>; + 0xa800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>; interrupt-parent = <&mpic>; - interrupts = <18 2>; + interrupts = <24 2>; bus-range = <0 0>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e2000000 0 00100000>; - clock-frequency = <3f940aa>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0008000 1000>; + reg = <0xe0008000 0x1000>; compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts index fa8d9aaad157..663c7c50ca45 100644 --- a/arch/powerpc/boot/dts/mpc8541cds.dts +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -1,7 +1,7 @@ /* * MPC8541 CDS Device Tree Source * - * Copyright 2006 Freescale Semiconductor Inc. + * Copyright 2006, 2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,6 +9,7 @@ * option) any later version. */ +/dts-v1/; / { model = "MPC8541CDS"; @@ -31,11 +32,11 @@ PowerPC,8541@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K timebase-frequency = <0>; // 33 MHz, from uboot bus-frequency = <0>; // 166 MHz clock-frequency = <0>; // 825 MHz, from uboot @@ -44,31 +45,31 @@ memory { device_type = "memory"; - reg = <00000000 08000000>; // 128M at 0x0 + reg = <0x0 0x8000000>; // 128M at 0x0 }; soc8541@e0000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = <e0000000 00001000>; // CCSRBAR 1M + ranges = <0x0 0xe0000000 0x100000>; + reg = <0xe0000000 0x1000>; // CCSRBAR 1M bus-frequency = <0>; memory-controller@2000 { compatible = "fsl,8541-memory-controller"; - reg = <2000 1000>; + reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; - interrupts = <12 2>; + interrupts = <18 2>; }; l2-cache-controller@20000 { compatible = "fsl,8541-l2-cache-controller"; - reg = <20000 1000>; - cache-line-size = <20>; // 32 bytes - cache-size = <40000>; // L2, 256K + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2, 256K interrupt-parent = <&mpic>; - interrupts = <10 2>; + interrupts = <16 2>; }; i2c@3000 { @@ -76,8 +77,8 @@ #size-cells = <0>; cell-index = <0>; compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = <2b 2>; + reg = <0x3000 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -86,18 +87,18 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-mdio"; - reg = <24520 20>; + reg = <0x24520 0x20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <0>; + reg = <0x0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <1>; + reg = <0x1>; device_type = "ethernet-phy"; }; }; @@ -107,9 +108,9 @@ device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <24000 1000>; + reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1d 2 1e 2 22 2>; + interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; }; @@ -119,9 +120,9 @@ device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <25000 1000>; + reg = <0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <23 2 24 2 28 2>; + interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; }; @@ -130,9 +131,9 @@ cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; // reg base, size + reg = <0x4500 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; @@ -140,9 +141,9 @@ cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <4600 100>; // reg base, size + reg = <0x4600 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; @@ -151,7 +152,7 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <40000 40000>; + reg = <0x40000 0x40000>; compatible = "chrp,open-pic"; device_type = "open-pic"; big-endian; @@ -161,17 +162,17 @@ #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc8541-cpm", "fsl,cpm2"; - reg = <919c0 30>; + reg = <0x919c0 0x30>; ranges; muram@80000 { #address-cells = <1>; #size-cells = <1>; - ranges = <0 80000 10000>; + ranges = <0x0 0x80000 0x10000>; data@0 { compatible = "fsl,cpm-muram-data"; - reg = <0 2000 9000 1000>; + reg = <0x0 0x2000 0x9000 0x1000>; }; }; @@ -179,16 +180,16 @@ compatible = "fsl,mpc8541-brg", "fsl,cpm2-brg", "fsl,cpm-brg"; - reg = <919f0 10 915f0 10>; + reg = <0x919f0 0x10 0x915f0 0x10>; }; cpmpic: pic@90c00 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - interrupts = <2e 2>; + interrupts = <46 2>; interrupt-parent = <&mpic>; - reg = <90c00 80>; + reg = <0x90c00 0x80>; compatible = "fsl,mpc8541-cpm-pic", "fsl,cpm2-pic"; }; }; @@ -196,68 +197,68 @@ pci0: pci@e0008000 { cell-index = <0>; - interrupt-map-mask = <1f800 0 0 7>; + interrupt-map-mask = <0x1f800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x10 */ - 08000 0 0 1 &mpic 0 1 - 08000 0 0 2 &mpic 1 1 - 08000 0 0 3 &mpic 2 1 - 08000 0 0 4 &mpic 3 1 + 0x8000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x8000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x8000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x8000 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x11 */ - 08800 0 0 1 &mpic 0 1 - 08800 0 0 2 &mpic 1 1 - 08800 0 0 3 &mpic 2 1 - 08800 0 0 4 &mpic 3 1 + 0x8800 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x12 (Slot 1) */ - 09000 0 0 1 &mpic 0 1 - 09000 0 0 2 &mpic 1 1 - 09000 0 0 3 &mpic 2 1 - 09000 0 0 4 &mpic 3 1 + 0x9000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x13 (Slot 2) */ - 09800 0 0 1 &mpic 1 1 - 09800 0 0 2 &mpic 2 1 - 09800 0 0 3 &mpic 3 1 - 09800 0 0 4 &mpic 0 1 + 0x9800 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x9800 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x9800 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x9800 0x0 0x0 0x4 &mpic 0x0 0x1 /* IDSEL 0x14 (Slot 3) */ - 0a000 0 0 1 &mpic 2 1 - 0a000 0 0 2 &mpic 3 1 - 0a000 0 0 3 &mpic 0 1 - 0a000 0 0 4 &mpic 1 1 + 0xa000 0x0 0x0 0x1 &mpic 0x2 0x1 + 0xa000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0xa000 0x0 0x0 0x3 &mpic 0x0 0x1 + 0xa000 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x15 (Slot 4) */ - 0a800 0 0 1 &mpic 3 1 - 0a800 0 0 2 &mpic 0 1 - 0a800 0 0 3 &mpic 1 1 - 0a800 0 0 4 &mpic 2 1 + 0xa800 0x0 0x0 0x1 &mpic 0x3 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0x0 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0x1 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0x2 0x1 /* Bus 1 (Tundra Bridge) */ /* IDSEL 0x12 (ISA bridge) */ - 19000 0 0 1 &mpic 0 1 - 19000 0 0 2 &mpic 1 1 - 19000 0 0 3 &mpic 2 1 - 19000 0 0 4 &mpic 3 1>; + 0x19000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x19000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x19000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>; interrupt-parent = <&mpic>; - interrupts = <18 2>; + interrupts = <24 2>; bus-range = <0 0>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e2000000 0 00100000>; - clock-frequency = <3f940aa>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0008000 1000>; + reg = <0xe0008000 0x1000>; compatible = "fsl,mpc8540-pci"; device_type = "pci"; i8259@19000 { interrupt-controller; device_type = "interrupt-controller"; - reg = <19000 0 0 0 1>; + reg = <0x19000 0x0 0x0 0x0 0x1>; #address-cells = <0>; #interrupt-cells = <2>; compatible = "chrp,iic"; @@ -268,24 +269,24 @@ pci1: pci@e0009000 { cell-index = <1>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x15 */ - a800 0 0 1 &mpic b 1 - a800 0 0 2 &mpic b 1 - a800 0 0 3 &mpic b 1 - a800 0 0 4 &mpic b 1>; + 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>; interrupt-parent = <&mpic>; - interrupts = <19 2>; + interrupts = <25 2>; bus-range = <0 0>; - ranges = <02000000 0 a0000000 a0000000 0 20000000 - 01000000 0 00000000 e3000000 0 00100000>; - clock-frequency = <3f940aa>; + ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0009000 1000>; + reg = <0xe0009000 0x1000>; compatible = "fsl,mpc8540-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts index 688af9d06382..6a0d8db96d97 100644 --- a/arch/powerpc/boot/dts/mpc8544ds.dts +++ b/arch/powerpc/boot/dts/mpc8544ds.dts @@ -1,7 +1,7 @@ /* * MPC8544 DS Device Tree Source * - * Copyright 2007 Freescale Semiconductor Inc. + * Copyright 2007, 2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,6 +9,7 @@ * option) any later version. */ +/dts-v1/; / { model = "MPC8544DS"; compatible = "MPC8544DS", "MPC85xxDS"; @@ -27,17 +28,16 @@ }; cpus { - #cpus = <1>; #address-cells = <1>; #size-cells = <0>; PowerPC,8544@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; @@ -46,7 +46,7 @@ memory { device_type = "memory"; - reg = <00000000 00000000>; // Filled by U-Boot + reg = <0x0 0x0>; // Filled by U-Boot }; soc8544@e0000000 { @@ -54,24 +54,24 @@ #size-cells = <1>; device_type = "soc"; - ranges = <00000000 e0000000 00100000>; - reg = <e0000000 00001000>; // CCSRBAR 1M + ranges = <0x0 0xe0000000 0x100000>; + reg = <0xe0000000 0x1000>; // CCSRBAR 1M bus-frequency = <0>; // Filled out by uboot. memory-controller@2000 { compatible = "fsl,8544-memory-controller"; - reg = <2000 1000>; + reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; - interrupts = <12 2>; + interrupts = <18 2>; }; l2-cache-controller@20000 { compatible = "fsl,8544-l2-cache-controller"; - reg = <20000 1000>; - cache-line-size = <20>; // 32 bytes - cache-size = <40000>; // L2, 256K + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2, 256K interrupt-parent = <&mpic>; - interrupts = <10 2>; + interrupts = <16 2>; }; i2c@3000 { @@ -79,8 +79,8 @@ #size-cells = <0>; cell-index = <0>; compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = <2b 2>; + reg = <0x3000 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -90,8 +90,8 @@ #size-cells = <0>; cell-index = <1>; compatible = "fsl-i2c"; - reg = <3100 100>; - interrupts = <2b 2>; + reg = <0x3100 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -100,30 +100,71 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-mdio"; - reg = <24520 20>; + reg = <0x24520 0x20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; - interrupts = <a 1>; - reg = <0>; + interrupts = <10 1>; + reg = <0x0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; - interrupts = <a 1>; - reg = <1>; + interrupts = <10 1>; + reg = <0x1>; device_type = "ethernet-phy"; }; }; + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8544-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8544-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8544-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8544-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8544-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + enet0: ethernet@24000 { cell-index = <0>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <24000 1000>; + reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1d 2 1e 2 22 2>; + interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; @@ -134,9 +175,9 @@ device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <26000 1000>; + reg = <0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1f 2 20 2 21 2>; + interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; @@ -146,9 +187,9 @@ cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; + reg = <0x4500 0x100>; clock-frequency = <0>; - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; @@ -156,15 +197,15 @@ cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <4600 100>; + reg = <0x4600 0x100>; clock-frequency = <0>; - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; global-utilities@e0000 { //global utilities block compatible = "fsl,mpc8548-guts"; - reg = <e0000 1000>; + reg = <0xe0000 0x1000>; fsl,has-rstcr; }; @@ -173,7 +214,7 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <40000 40000>; + reg = <0x40000 0x40000>; compatible = "chrp,open-pic"; device_type = "open-pic"; big-endian; @@ -184,32 +225,32 @@ cell-index = <0>; compatible = "fsl,mpc8540-pci"; device_type = "pci"; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x11 J17 Slot 1 */ - 8800 0 0 1 &mpic 2 1 - 8800 0 0 2 &mpic 3 1 - 8800 0 0 3 &mpic 4 1 - 8800 0 0 4 &mpic 1 1 + 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x12 J16 Slot 2 */ - 9000 0 0 1 &mpic 3 1 - 9000 0 0 2 &mpic 4 1 - 9000 0 0 3 &mpic 2 1 - 9000 0 0 4 &mpic 1 1>; + 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x1 0x1>; interrupt-parent = <&mpic>; - interrupts = <18 2>; - bus-range = <0 ff>; - ranges = <02000000 0 c0000000 c0000000 0 20000000 - 01000000 0 00000000 e1000000 0 00010000>; - clock-frequency = <3f940aa>; + interrupts = <24 2>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe1000000 0x0 0x10000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0008000 1000>; + reg = <0xe0008000 0x1000>; }; pci1: pcie@e0009000 { @@ -219,33 +260,33 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0009000 1000>; - bus-range = <0 ff>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e1010000 0 00010000>; - clock-frequency = <1fca055>; + reg = <0xe0009000 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe1010000 0x0 0x10000>; + clock-frequency = <33333333>; interrupt-parent = <&mpic>; - interrupts = <1a 2>; - interrupt-map-mask = <f800 0 0 7>; + interrupts = <26 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 4 1 - 0000 0 0 2 &mpic 5 1 - 0000 0 0 3 &mpic 6 1 - 0000 0 0 4 &mpic 7 1 + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 >; pcie@0 { - reg = <0 0 0 0 0>; + reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - ranges = <02000000 0 80000000 - 02000000 0 80000000 - 0 20000000 + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00010000>; + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; }; }; @@ -256,33 +297,33 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e000a000 1000>; - bus-range = <0 ff>; - ranges = <02000000 0 a0000000 a0000000 0 10000000 - 01000000 0 00000000 e1020000 0 00010000>; - clock-frequency = <1fca055>; + reg = <0xe000a000 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x1000000 0x0 0x0 0xe1020000 0x0 0x10000>; + clock-frequency = <33333333>; interrupt-parent = <&mpic>; - interrupts = <19 2>; - interrupt-map-mask = <f800 0 0 7>; + interrupts = <25 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 0 1 - 0000 0 0 2 &mpic 1 1 - 0000 0 0 3 &mpic 2 1 - 0000 0 0 4 &mpic 3 1 + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 >; pcie@0 { - reg = <0 0 0 0 0>; + reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - ranges = <02000000 0 a0000000 - 02000000 0 a0000000 - 0 10000000 + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x10000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00010000>; + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; }; }; @@ -293,72 +334,72 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e000b000 1000>; - bus-range = <0 ff>; - ranges = <02000000 0 b0000000 b0000000 0 00100000 - 01000000 0 00000000 b0100000 0 00100000>; - clock-frequency = <1fca055>; + reg = <0xe000b000 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xb0000000 0xb0000000 0x0 0x100000 + 0x1000000 0x0 0x0 0xb0100000 0x0 0x100000>; + clock-frequency = <33333333>; interrupt-parent = <&mpic>; - interrupts = <1b 2>; - interrupt-map-mask = <ff00 0 0 1>; + interrupts = <27 2>; + interrupt-map-mask = <0xff00 0x0 0x0 0x1>; interrupt-map = < // IDSEL 0x1c USB - e000 0 0 1 &i8259 c 2 - e100 0 0 2 &i8259 9 2 - e200 0 0 3 &i8259 a 2 - e300 0 0 4 &i8259 b 2 + 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2 + 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2 + 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2 + 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2 // IDSEL 0x1d Audio - e800 0 0 1 &i8259 6 2 + 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 // IDSEL 0x1e Legacy - f000 0 0 1 &i8259 7 2 - f100 0 0 1 &i8259 7 2 + 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 + 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 // IDSEL 0x1f IDE/SATA - f800 0 0 1 &i8259 e 2 - f900 0 0 1 &i8259 5 2 + 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 + 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 >; pcie@0 { - reg = <0 0 0 0 0>; + reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - ranges = <02000000 0 b0000000 - 02000000 0 b0000000 - 0 00100000 + ranges = <0x2000000 0x0 0xb0000000 + 0x2000000 0x0 0xb0000000 + 0x0 0x100000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00100000>; + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; uli1575@0 { - reg = <0 0 0 0 0>; + reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; - ranges = <02000000 0 b0000000 - 02000000 0 b0000000 - 0 00100000 + ranges = <0x2000000 0x0 0xb0000000 + 0x2000000 0x0 0xb0000000 + 0x0 0x100000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00100000>; + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; isa@1e { device_type = "isa"; #interrupt-cells = <2>; #size-cells = <1>; #address-cells = <2>; - reg = <f000 0 0 0 0>; - ranges = <1 0 - 01000000 0 0 - 00001000>; + reg = <0xf000 0x0 0x0 0x0 0x0>; + ranges = <0x1 0x0 + 0x1000000 0x0 0x0 + 0x1000>; interrupt-parent = <&i8259>; i8259: interrupt-controller@20 { - reg = <1 20 2 - 1 a0 2 - 1 4d0 2>; + reg = <0x1 0x20 0x2 + 0x1 0xa0 0x2 + 0x1 0x4d0 0x2>; interrupt-controller; device_type = "interrupt-controller"; #address-cells = <0>; @@ -371,28 +412,28 @@ i8042@60 { #size-cells = <0>; #address-cells = <1>; - reg = <1 60 1 1 64 1>; - interrupts = <1 3 c 3>; + reg = <0x1 0x60 0x1 0x1 0x64 0x1>; + interrupts = <1 3 12 3>; interrupt-parent = <&i8259>; keyboard@0 { - reg = <0>; + reg = <0x0>; compatible = "pnpPNP,303"; }; mouse@1 { - reg = <1>; + reg = <0x1>; compatible = "pnpPNP,f03"; }; }; rtc@70 { compatible = "pnpPNP,b00"; - reg = <1 70 2>; + reg = <0x1 0x70 0x2>; }; gpio@400 { - reg = <1 400 80>; + reg = <0x1 0x400 0x80>; }; }; }; diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index 1f470c6a1c63..fa298a8c81cc 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -1,7 +1,7 @@ /* * MPC8548 CDS Device Tree Source * - * Copyright 2006 Freescale Semiconductor Inc. + * Copyright 2006, 2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,6 +9,7 @@ * option) any later version. */ +/dts-v1/; / { model = "MPC8548CDS"; @@ -36,11 +37,11 @@ PowerPC,8548@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K timebase-frequency = <0>; // 33 MHz, from uboot bus-frequency = <0>; // 166 MHz clock-frequency = <0>; // 825 MHz, from uboot @@ -49,31 +50,31 @@ memory { device_type = "memory"; - reg = <00000000 08000000>; // 128M at 0x0 + reg = <0x0 0x8000000>; // 128M at 0x0 }; soc8548@e0000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <00000000 e0000000 00100000>; - reg = <e0000000 00001000>; // CCSRBAR + ranges = <0x0 0xe0000000 0x100000>; + reg = <0xe0000000 0x1000>; // CCSRBAR bus-frequency = <0>; memory-controller@2000 { compatible = "fsl,8548-memory-controller"; - reg = <2000 1000>; + reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; - interrupts = <12 2>; + interrupts = <18 2>; }; l2-cache-controller@20000 { compatible = "fsl,8548-l2-cache-controller"; - reg = <20000 1000>; - cache-line-size = <20>; // 32 bytes - cache-size = <80000>; // L2, 512K + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K interrupt-parent = <&mpic>; - interrupts = <10 2>; + interrupts = <16 2>; }; i2c@3000 { @@ -81,8 +82,8 @@ #size-cells = <0>; cell-index = <0>; compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = <2b 2>; + reg = <0x3000 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -92,8 +93,8 @@ #size-cells = <0>; cell-index = <1>; compatible = "fsl-i2c"; - reg = <3100 100>; - interrupts = <2b 2>; + reg = <0x3100 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -102,30 +103,30 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-mdio"; - reg = <24520 20>; + reg = <0x24520 0x20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <0>; + reg = <0x0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <1>; + reg = <0x1>; device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <2>; + reg = <0x2>; device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <3>; + reg = <0x3>; device_type = "ethernet-phy"; }; }; @@ -135,9 +136,9 @@ device_type = "network"; model = "eTSEC"; compatible = "gianfar"; - reg = <24000 1000>; + reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1d 2 1e 2 22 2>; + interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; }; @@ -147,9 +148,9 @@ device_type = "network"; model = "eTSEC"; compatible = "gianfar"; - reg = <25000 1000>; + reg = <0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <23 2 24 2 28 2>; + interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; }; @@ -160,9 +161,9 @@ device_type = "network"; model = "eTSEC"; compatible = "gianfar"; - reg = <26000 1000>; + reg = <0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1f 2 20 2 21 2>; + interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; phy-handle = <&phy2>; }; @@ -172,9 +173,9 @@ device_type = "network"; model = "eTSEC"; compatible = "gianfar"; - reg = <27000 1000>; + reg = <0x27000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <25 2 26 2 27 2>; + interrupts = <37 2 38 2 39 2>; interrupt-parent = <&mpic>; phy-handle = <&phy3>; }; @@ -184,9 +185,9 @@ cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; // reg base, size + reg = <0x4500 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; @@ -194,15 +195,15 @@ cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <4600 100>; // reg base, size + reg = <0x4600 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; global-utilities@e0000 { //global utilities reg compatible = "fsl,mpc8548-guts"; - reg = <e0000 1000>; + reg = <0xe0000 0x1000>; fsl,has-rstcr; }; @@ -211,7 +212,7 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <40000 40000>; + reg = <0x40000 0x40000>; compatible = "chrp,open-pic"; device_type = "open-pic"; big-endian; @@ -220,139 +221,139 @@ pci0: pci@e0008000 { cell-index = <0>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x4 (PCIX Slot 2) */ - 02000 0 0 1 &mpic 0 1 - 02000 0 0 2 &mpic 1 1 - 02000 0 0 3 &mpic 2 1 - 02000 0 0 4 &mpic 3 1 + 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x5 (PCIX Slot 3) */ - 02800 0 0 1 &mpic 1 1 - 02800 0 0 2 &mpic 2 1 - 02800 0 0 3 &mpic 3 1 - 02800 0 0 4 &mpic 0 1 + 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 /* IDSEL 0x6 (PCIX Slot 4) */ - 03000 0 0 1 &mpic 2 1 - 03000 0 0 2 &mpic 3 1 - 03000 0 0 3 &mpic 0 1 - 03000 0 0 4 &mpic 1 1 + 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 + 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x8 (PCIX Slot 5) */ - 04000 0 0 1 &mpic 0 1 - 04000 0 0 2 &mpic 1 1 - 04000 0 0 3 &mpic 2 1 - 04000 0 0 4 &mpic 3 1 + 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0xC (Tsi310 bridge) */ - 06000 0 0 1 &mpic 0 1 - 06000 0 0 2 &mpic 1 1 - 06000 0 0 3 &mpic 2 1 - 06000 0 0 4 &mpic 3 1 + 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x14 (Slot 2) */ - 0a000 0 0 1 &mpic 0 1 - 0a000 0 0 2 &mpic 1 1 - 0a000 0 0 3 &mpic 2 1 - 0a000 0 0 4 &mpic 3 1 + 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x15 (Slot 3) */ - 0a800 0 0 1 &mpic 1 1 - 0a800 0 0 2 &mpic 2 1 - 0a800 0 0 3 &mpic 3 1 - 0a800 0 0 4 &mpic 0 1 + 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 /* IDSEL 0x16 (Slot 4) */ - 0b000 0 0 1 &mpic 2 1 - 0b000 0 0 2 &mpic 3 1 - 0b000 0 0 3 &mpic 0 1 - 0b000 0 0 4 &mpic 1 1 + 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 + 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 + 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x18 (Slot 5) */ - 0c000 0 0 1 &mpic 0 1 - 0c000 0 0 2 &mpic 1 1 - 0c000 0 0 3 &mpic 2 1 - 0c000 0 0 4 &mpic 3 1 + 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x1C (Tsi310 bridge PCI primary) */ - 0E000 0 0 1 &mpic 0 1 - 0E000 0 0 2 &mpic 1 1 - 0E000 0 0 3 &mpic 2 1 - 0E000 0 0 4 &mpic 3 1>; + 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1>; interrupt-parent = <&mpic>; - interrupts = <18 2>; + interrupts = <24 2>; bus-range = <0 0>; - ranges = <02000000 0 80000000 80000000 0 10000000 - 01000000 0 00000000 e2000000 0 00800000>; - clock-frequency = <3f940aa>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0008000 1000>; + reg = <0xe0008000 0x1000>; compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; device_type = "pci"; pci_bridge@1c { - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x00 (PrPMC Site) */ - 0000 0 0 1 &mpic 0 1 - 0000 0 0 2 &mpic 1 1 - 0000 0 0 3 &mpic 2 1 - 0000 0 0 4 &mpic 3 1 + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x04 (VIA chip) */ - 2000 0 0 1 &mpic 0 1 - 2000 0 0 2 &mpic 1 1 - 2000 0 0 3 &mpic 2 1 - 2000 0 0 4 &mpic 3 1 + 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x05 (8139) */ - 2800 0 0 1 &mpic 1 1 + 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 /* IDSEL 0x06 (Slot 6) */ - 3000 0 0 1 &mpic 2 1 - 3000 0 0 2 &mpic 3 1 - 3000 0 0 3 &mpic 0 1 - 3000 0 0 4 &mpic 1 1 + 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 + 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDESL 0x07 (Slot 7) */ - 3800 0 0 1 &mpic 3 1 - 3800 0 0 2 &mpic 0 1 - 3800 0 0 3 &mpic 1 1 - 3800 0 0 4 &mpic 2 1>; + 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 + 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1>; - reg = <e000 0 0 0 0>; + reg = <0xe000 0x0 0x0 0x0 0x0>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - ranges = <02000000 0 80000000 - 02000000 0 80000000 - 0 20000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00080000>; - clock-frequency = <1fca055>; + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x80000>; + clock-frequency = <33333333>; isa@4 { device_type = "isa"; #interrupt-cells = <2>; #size-cells = <1>; #address-cells = <2>; - reg = <2000 0 0 0 0>; - ranges = <1 0 01000000 0 0 00001000>; + reg = <0x2000 0x0 0x0 0x0 0x0>; + ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>; interrupt-parent = <&i8259>; i8259: interrupt-controller@20 { interrupt-controller; device_type = "interrupt-controller"; - reg = <1 20 2 - 1 a0 2 - 1 4d0 2>; + reg = <0x1 0x20 0x2 + 0x1 0xa0 0x2 + 0x1 0x4d0 0x2>; #address-cells = <0>; #interrupt-cells = <2>; compatible = "chrp,iic"; @@ -362,7 +363,7 @@ rtc@70 { compatible = "pnpPNP,b00"; - reg = <1 70 2>; + reg = <0x1 0x70 0x2>; }; }; }; @@ -370,64 +371,64 @@ pci1: pci@e0009000 { cell-index = <1>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x15 */ - a800 0 0 1 &mpic b 1 - a800 0 0 2 &mpic 1 1 - a800 0 0 3 &mpic 2 1 - a800 0 0 4 &mpic 3 1>; + 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1>; interrupt-parent = <&mpic>; - interrupts = <19 2>; + interrupts = <25 2>; bus-range = <0 0>; - ranges = <02000000 0 90000000 90000000 0 10000000 - 01000000 0 00000000 e2800000 0 00800000>; - clock-frequency = <3f940aa>; + ranges = <0x2000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0009000 1000>; + reg = <0xe0009000 0x1000>; compatible = "fsl,mpc8540-pci"; device_type = "pci"; }; pci2: pcie@e000a000 { cell-index = <2>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0 (PEX) */ - 00000 0 0 1 &mpic 0 1 - 00000 0 0 2 &mpic 1 1 - 00000 0 0 3 &mpic 2 1 - 00000 0 0 4 &mpic 3 1>; + 00000 0x0 0x0 0x1 &mpic 0x0 0x1 + 00000 0x0 0x0 0x2 &mpic 0x1 0x1 + 00000 0x0 0x0 0x3 &mpic 0x2 0x1 + 00000 0x0 0x0 0x4 &mpic 0x3 0x1>; interrupt-parent = <&mpic>; - interrupts = <1a 2>; - bus-range = <0 ff>; - ranges = <02000000 0 a0000000 a0000000 0 20000000 - 01000000 0 00000000 e3000000 0 08000000>; - clock-frequency = <1fca055>; + interrupts = <26 2>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe3000000 0x0 0x8000000>; + clock-frequency = <33333333>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e000a000 1000>; + reg = <0xe000a000 0x1000>; compatible = "fsl,mpc8548-pcie"; device_type = "pci"; pcie@0 { - reg = <0 0 0 0 0>; + reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - ranges = <02000000 0 a0000000 - 02000000 0 a0000000 - 0 20000000 + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 08000000>; + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x8000000>; }; }; }; diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts index 4538f3c38862..b025c566c10d 100644 --- a/arch/powerpc/boot/dts/mpc8555cds.dts +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -1,7 +1,7 @@ /* * MPC8555 CDS Device Tree Source * - * Copyright 2006 Freescale Semiconductor Inc. + * Copyright 2006, 2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,6 +9,7 @@ * option) any later version. */ +/dts-v1/; / { model = "MPC8555CDS"; @@ -31,11 +32,11 @@ PowerPC,8555@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K timebase-frequency = <0>; // 33 MHz, from uboot bus-frequency = <0>; // 166 MHz clock-frequency = <0>; // 825 MHz, from uboot @@ -44,31 +45,31 @@ memory { device_type = "memory"; - reg = <00000000 08000000>; // 128M at 0x0 + reg = <0x0 0x8000000>; // 128M at 0x0 }; soc8555@e0000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = <e0000000 00001000>; // CCSRBAR 1M + ranges = <0x0 0xe0000000 0x100000>; + reg = <0xe0000000 0x1000>; // CCSRBAR 1M bus-frequency = <0>; memory-controller@2000 { compatible = "fsl,8555-memory-controller"; - reg = <2000 1000>; + reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; - interrupts = <12 2>; + interrupts = <18 2>; }; l2-cache-controller@20000 { compatible = "fsl,8555-l2-cache-controller"; - reg = <20000 1000>; - cache-line-size = <20>; // 32 bytes - cache-size = <40000>; // L2, 256K + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2, 256K interrupt-parent = <&mpic>; - interrupts = <10 2>; + interrupts = <16 2>; }; i2c@3000 { @@ -76,8 +77,8 @@ #size-cells = <0>; cell-index = <0>; compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = <2b 2>; + reg = <0x3000 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -86,18 +87,18 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-mdio"; - reg = <24520 20>; + reg = <0x24520 0x20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <0>; + reg = <0x0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <1>; + reg = <0x1>; device_type = "ethernet-phy"; }; }; @@ -107,9 +108,9 @@ device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <24000 1000>; + reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1d 2 1e 2 22 2>; + interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; }; @@ -119,9 +120,9 @@ device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <25000 1000>; + reg = <0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <23 2 24 2 28 2>; + interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; }; @@ -130,9 +131,9 @@ cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; // reg base, size + reg = <0x4500 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; @@ -140,9 +141,9 @@ cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <4600 100>; // reg base, size + reg = <0x4600 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; @@ -151,7 +152,7 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <40000 40000>; + reg = <0x40000 0x40000>; compatible = "chrp,open-pic"; device_type = "open-pic"; big-endian; @@ -161,17 +162,17 @@ #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc8555-cpm", "fsl,cpm2"; - reg = <919c0 30>; + reg = <0x919c0 0x30>; ranges; muram@80000 { #address-cells = <1>; #size-cells = <1>; - ranges = <0 80000 10000>; + ranges = <0x0 0x80000 0x10000>; data@0 { compatible = "fsl,cpm-muram-data"; - reg = <0 2000 9000 1000>; + reg = <0x0 0x2000 0x9000 0x1000>; }; }; @@ -179,16 +180,16 @@ compatible = "fsl,mpc8555-brg", "fsl,cpm2-brg", "fsl,cpm-brg"; - reg = <919f0 10 915f0 10>; + reg = <0x919f0 0x10 0x915f0 0x10>; }; cpmpic: pic@90c00 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - interrupts = <2e 2>; + interrupts = <46 2>; interrupt-parent = <&mpic>; - reg = <90c00 80>; + reg = <0x90c00 0x80>; compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic"; }; }; @@ -196,68 +197,68 @@ pci0: pci@e0008000 { cell-index = <0>; - interrupt-map-mask = <1f800 0 0 7>; + interrupt-map-mask = <0x1f800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x10 */ - 08000 0 0 1 &mpic 0 1 - 08000 0 0 2 &mpic 1 1 - 08000 0 0 3 &mpic 2 1 - 08000 0 0 4 &mpic 3 1 + 0x8000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x8000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x8000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x8000 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x11 */ - 08800 0 0 1 &mpic 0 1 - 08800 0 0 2 &mpic 1 1 - 08800 0 0 3 &mpic 2 1 - 08800 0 0 4 &mpic 3 1 + 0x8800 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x12 (Slot 1) */ - 09000 0 0 1 &mpic 0 1 - 09000 0 0 2 &mpic 1 1 - 09000 0 0 3 &mpic 2 1 - 09000 0 0 4 &mpic 3 1 + 0x9000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x13 (Slot 2) */ - 09800 0 0 1 &mpic 1 1 - 09800 0 0 2 &mpic 2 1 - 09800 0 0 3 &mpic 3 1 - 09800 0 0 4 &mpic 0 1 + 0x9800 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x9800 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x9800 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x9800 0x0 0x0 0x4 &mpic 0x0 0x1 /* IDSEL 0x14 (Slot 3) */ - 0a000 0 0 1 &mpic 2 1 - 0a000 0 0 2 &mpic 3 1 - 0a000 0 0 3 &mpic 0 1 - 0a000 0 0 4 &mpic 1 1 + 0xa000 0x0 0x0 0x1 &mpic 0x2 0x1 + 0xa000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0xa000 0x0 0x0 0x3 &mpic 0x0 0x1 + 0xa000 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x15 (Slot 4) */ - 0a800 0 0 1 &mpic 3 1 - 0a800 0 0 2 &mpic 0 1 - 0a800 0 0 3 &mpic 1 1 - 0a800 0 0 4 &mpic 2 1 + 0xa800 0x0 0x0 0x1 &mpic 0x3 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0x0 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0x1 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0x2 0x1 /* Bus 1 (Tundra Bridge) */ /* IDSEL 0x12 (ISA bridge) */ - 19000 0 0 1 &mpic 0 1 - 19000 0 0 2 &mpic 1 1 - 19000 0 0 3 &mpic 2 1 - 19000 0 0 4 &mpic 3 1>; + 0x19000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x19000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x19000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>; interrupt-parent = <&mpic>; - interrupts = <18 2>; + interrupts = <24 2>; bus-range = <0 0>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e2000000 0 00100000>; - clock-frequency = <3f940aa>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0008000 1000>; + reg = <0xe0008000 0x1000>; compatible = "fsl,mpc8540-pci"; device_type = "pci"; i8259@19000 { interrupt-controller; device_type = "interrupt-controller"; - reg = <19000 0 0 0 1>; + reg = <0x19000 0x0 0x0 0x0 0x1>; #address-cells = <0>; #interrupt-cells = <2>; compatible = "chrp,iic"; @@ -268,24 +269,24 @@ pci1: pci@e0009000 { cell-index = <1>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x15 */ - a800 0 0 1 &mpic b 1 - a800 0 0 2 &mpic b 1 - a800 0 0 3 &mpic b 1 - a800 0 0 4 &mpic b 1>; + 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>; interrupt-parent = <&mpic>; - interrupts = <19 2>; + interrupts = <25 2>; bus-range = <0 0>; - ranges = <02000000 0 a0000000 a0000000 0 20000000 - 01000000 0 00000000 e3000000 0 00100000>; - clock-frequency = <3f940aa>; + ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0009000 1000>; + reg = <0xe0009000 0x1000>; compatible = "fsl,mpc8540-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts index 639ce8a709a6..0cc16ab305d1 100644 --- a/arch/powerpc/boot/dts/mpc8560ads.dts +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -1,7 +1,7 @@ /* * MPC8560 ADS Device Tree Source * - * Copyright 2006 Freescale Semiconductor Inc. + * Copyright 2006, 2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,6 +9,7 @@ * option) any later version. */ +/dts-v1/; / { model = "MPC8560ADS"; @@ -32,74 +33,74 @@ PowerPC,8560@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K - timebase-frequency = <04ead9a0>; - bus-frequency = <13ab6680>; - clock-frequency = <312c8040>; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <82500000>; + bus-frequency = <330000000>; + clock-frequency = <825000000>; }; }; memory { device_type = "memory"; - reg = <00000000 10000000>; + reg = <0x0 0x10000000>; }; soc8560@e0000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = <e0000000 00000200>; - bus-frequency = <13ab6680>; + ranges = <0x0 0xe0000000 0x100000>; + reg = <0xe0000000 0x200>; + bus-frequency = <330000000>; memory-controller@2000 { compatible = "fsl,8540-memory-controller"; - reg = <2000 1000>; + reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; - interrupts = <12 2>; + interrupts = <18 2>; }; l2-cache-controller@20000 { compatible = "fsl,8540-l2-cache-controller"; - reg = <20000 1000>; - cache-line-size = <20>; // 32 bytes - cache-size = <40000>; // L2, 256K + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2, 256K interrupt-parent = <&mpic>; - interrupts = <10 2>; + interrupts = <16 2>; }; mdio@24520 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-mdio"; - reg = <24520 20>; + reg = <0x24520 0x20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <0>; + reg = <0x0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <1>; + reg = <0x1>; device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupt-parent = <&mpic>; interrupts = <7 1>; - reg = <2>; + reg = <0x2>; device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; interrupts = <7 1>; - reg = <3>; + reg = <0x3>; device_type = "ethernet-phy"; }; }; @@ -109,9 +110,9 @@ device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <24000 1000>; + reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1d 2 1e 2 22 2>; + interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; }; @@ -121,9 +122,9 @@ device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <25000 1000>; + reg = <0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <23 2 24 2 28 2>; + interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; }; @@ -132,7 +133,7 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <40000 40000>; + reg = <0x40000 0x40000>; device_type = "open-pic"; }; @@ -140,17 +141,17 @@ #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc8560-cpm", "fsl,cpm2"; - reg = <919c0 30>; + reg = <0x919c0 0x30>; ranges; muram@80000 { #address-cells = <1>; #size-cells = <1>; - ranges = <0 80000 10000>; + ranges = <0x0 0x80000 0x10000>; data@0 { compatible = "fsl,cpm-muram-data"; - reg = <0 4000 9000 2000>; + reg = <0x0 0x4000 0x9000 0x2000>; }; }; @@ -158,17 +159,17 @@ compatible = "fsl,mpc8560-brg", "fsl,cpm2-brg", "fsl,cpm-brg"; - reg = <919f0 10 915f0 10>; - clock-frequency = <d#165000000>; + reg = <0x919f0 0x10 0x915f0 0x10>; + clock-frequency = <165000000>; }; cpmpic: pic@90c00 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - interrupts = <2e 2>; + interrupts = <46 2>; interrupt-parent = <&mpic>; - reg = <90c00 80>; + reg = <0x90c00 0x80>; compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic"; }; @@ -176,11 +177,11 @@ device_type = "serial"; compatible = "fsl,mpc8560-scc-uart", "fsl,cpm2-scc-uart"; - reg = <91a00 20 88000 100>; + reg = <0x91a00 0x20 0x88000 0x100>; fsl,cpm-brg = <1>; - fsl,cpm-command = <00800000>; - current-speed = <1c200>; - interrupts = <28 8>; + fsl,cpm-command = <0x800000>; + current-speed = <115200>; + interrupts = <40 8>; interrupt-parent = <&cpmpic>; }; @@ -188,11 +189,11 @@ device_type = "serial"; compatible = "fsl,mpc8560-scc-uart", "fsl,cpm2-scc-uart"; - reg = <91a20 20 88100 100>; + reg = <0x91a20 0x20 0x88100 0x100>; fsl,cpm-brg = <2>; - fsl,cpm-command = <04a00000>; - current-speed = <1c200>; - interrupts = <29 8>; + fsl,cpm-command = <0x4a00000>; + current-speed = <115200>; + interrupts = <41 8>; interrupt-parent = <&cpmpic>; }; @@ -200,10 +201,10 @@ device_type = "network"; compatible = "fsl,mpc8560-fcc-enet", "fsl,cpm2-fcc-enet"; - reg = <91320 20 88500 100 913b0 1>; + reg = <0x91320 0x20 0x88500 0x100 0x913b0 0x1>; local-mac-address = [ 00 00 00 00 00 00 ]; - fsl,cpm-command = <16200300>; - interrupts = <21 8>; + fsl,cpm-command = <0x16200300>; + interrupts = <33 8>; interrupt-parent = <&cpmpic>; phy-handle = <&phy2>; }; @@ -212,10 +213,10 @@ device_type = "network"; compatible = "fsl,mpc8560-fcc-enet", "fsl,cpm2-fcc-enet"; - reg = <91340 20 88600 100 913d0 1>; + reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>; local-mac-address = [ 00 00 00 00 00 00 ]; - fsl,cpm-command = <1a400300>; - interrupts = <22 8>; + fsl,cpm-command = <0x1a400300>; + interrupts = <34 8>; interrupt-parent = <&cpmpic>; phy-handle = <&phy3>; }; @@ -229,87 +230,87 @@ #address-cells = <3>; compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; device_type = "pci"; - reg = <e0008000 1000>; - clock-frequency = <3f940aa>; - interrupt-map-mask = <f800 0 0 7>; + reg = <0xe0008000 0x1000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x2 */ - 1000 0 0 1 &mpic 1 1 - 1000 0 0 2 &mpic 2 1 - 1000 0 0 3 &mpic 3 1 - 1000 0 0 4 &mpic 4 1 + 0x1000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x1000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x1000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x1000 0x0 0x0 0x4 &mpic 0x4 0x1 /* IDSEL 0x3 */ - 1800 0 0 1 &mpic 4 1 - 1800 0 0 2 &mpic 1 1 - 1800 0 0 3 &mpic 2 1 - 1800 0 0 4 &mpic 3 1 + 0x1800 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x1800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x1800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x1800 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x4 */ - 2000 0 0 1 &mpic 3 1 - 2000 0 0 2 &mpic 4 1 - 2000 0 0 3 &mpic 1 1 - 2000 0 0 4 &mpic 2 1 + 0x2000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x2000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x2000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x2000 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 0x5 */ - 2800 0 0 1 &mpic 2 1 - 2800 0 0 2 &mpic 3 1 - 2800 0 0 3 &mpic 4 1 - 2800 0 0 4 &mpic 1 1 + 0x2800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x2800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x2800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x2800 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 12 */ - 6000 0 0 1 &mpic 1 1 - 6000 0 0 2 &mpic 2 1 - 6000 0 0 3 &mpic 3 1 - 6000 0 0 4 &mpic 4 1 + 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x6000 0x0 0x0 0x4 &mpic 0x4 0x1 /* IDSEL 13 */ - 6800 0 0 1 &mpic 4 1 - 6800 0 0 2 &mpic 1 1 - 6800 0 0 3 &mpic 2 1 - 6800 0 0 4 &mpic 3 1 + 0x6800 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x6800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x6800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x6800 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 14*/ - 7000 0 0 1 &mpic 3 1 - 7000 0 0 2 &mpic 4 1 - 7000 0 0 3 &mpic 1 1 - 7000 0 0 4 &mpic 2 1 + 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x7000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x7000 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 15 */ - 7800 0 0 1 &mpic 2 1 - 7800 0 0 2 &mpic 3 1 - 7800 0 0 3 &mpic 4 1 - 7800 0 0 4 &mpic 1 1 + 0x7800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x7800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x7800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x7800 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 18 */ - 9000 0 0 1 &mpic 1 1 - 9000 0 0 2 &mpic 2 1 - 9000 0 0 3 &mpic 3 1 - 9000 0 0 4 &mpic 4 1 + 0x9000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 /* IDSEL 19 */ - 9800 0 0 1 &mpic 4 1 - 9800 0 0 2 &mpic 1 1 - 9800 0 0 3 &mpic 2 1 - 9800 0 0 4 &mpic 3 1 + 0x9800 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x9800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x9800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x9800 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 20 */ - a000 0 0 1 &mpic 3 1 - a000 0 0 2 &mpic 4 1 - a000 0 0 3 &mpic 1 1 - a000 0 0 4 &mpic 2 1 + 0xa000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0xa000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0xa000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0xa000 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 21 */ - a800 0 0 1 &mpic 2 1 - a800 0 0 2 &mpic 3 1 - a800 0 0 3 &mpic 4 1 - a800 0 0 4 &mpic 1 1>; + 0xa800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>; interrupt-parent = <&mpic>; - interrupts = <18 2>; + interrupts = <24 2>; bus-range = <0 0>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e2000000 0 01000000>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe2000000 0x0 0x1000000>; }; }; diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index 97bc048f2158..a025a8ededc5 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -1,7 +1,7 @@ /* * MPC8568E MDS Device Tree Source * - * Copyright 2007 Freescale Semiconductor Inc. + * Copyright 2007, 2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,10 +9,7 @@ * option) any later version. */ - -/* -/memreserve/ 00000000 1000000; -*/ +/dts-v1/; / { model = "MPC8568EMDS"; @@ -37,11 +34,11 @@ PowerPC,8568@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; @@ -50,36 +47,36 @@ memory { device_type = "memory"; - reg = <00000000 10000000>; + reg = <0x0 0x10000000>; }; bcsr@f8000000 { device_type = "board-control"; - reg = <f8000000 8000>; + reg = <0xf8000000 0x8000>; }; soc8568@e0000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = <e0000000 00001000>; + ranges = <0x0 0xe0000000 0x100000>; + reg = <0xe0000000 0x1000>; bus-frequency = <0>; memory-controller@2000 { compatible = "fsl,8568-memory-controller"; - reg = <2000 1000>; + reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; - interrupts = <12 2>; + interrupts = <18 2>; }; l2-cache-controller@20000 { compatible = "fsl,8568-l2-cache-controller"; - reg = <20000 1000>; - cache-line-size = <20>; // 32 bytes - cache-size = <80000>; // L2, 512K + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K interrupt-parent = <&mpic>; - interrupts = <10 2>; + interrupts = <16 2>; }; i2c@3000 { @@ -87,14 +84,14 @@ #size-cells = <0>; cell-index = <0>; compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = <2b 2>; + reg = <0x3000 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; rtc@68 { compatible = "dallas,ds1374"; - reg = <68>; + reg = <0x68>; }; }; @@ -103,8 +100,8 @@ #size-cells = <0>; cell-index = <1>; compatible = "fsl-i2c"; - reg = <3100 100>; - interrupts = <2b 2>; + reg = <0x3100 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -113,30 +110,30 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-mdio"; - reg = <24520 20>; + reg = <0x24520 0x20>; phy0: ethernet-phy@7 { interrupt-parent = <&mpic>; interrupts = <1 1>; - reg = <7>; + reg = <0x7>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; interrupts = <2 1>; - reg = <1>; + reg = <0x1>; device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupt-parent = <&mpic>; interrupts = <1 1>; - reg = <2>; + reg = <0x2>; device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; interrupts = <2 1>; - reg = <3>; + reg = <0x3>; device_type = "ethernet-phy"; }; }; @@ -146,9 +143,9 @@ device_type = "network"; model = "eTSEC"; compatible = "gianfar"; - reg = <24000 1000>; + reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1d 2 1e 2 22 2>; + interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; phy-handle = <&phy2>; }; @@ -158,9 +155,9 @@ device_type = "network"; model = "eTSEC"; compatible = "gianfar"; - reg = <25000 1000>; + reg = <0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <23 2 24 2 28 2>; + interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; phy-handle = <&phy3>; }; @@ -169,15 +166,15 @@ cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; + reg = <0x4500 0x100>; clock-frequency = <0>; - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; global-utilities@e0000 { //global utilities block compatible = "fsl,mpc8548-guts"; - reg = <e0000 1000>; + reg = <0xe0000 0x1000>; fsl,has-rstcr; }; @@ -185,9 +182,9 @@ cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <4600 100>; + reg = <0x4600 0x100>; clock-frequency = <0>; - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; @@ -195,13 +192,13 @@ device_type = "crypto"; model = "SEC2"; compatible = "talitos"; - reg = <30000 f000>; - interrupts = <2d 2>; + reg = <0x30000 0xf000>; + interrupts = <45 2>; interrupt-parent = <&mpic>; num-channels = <4>; - channel-fifo-len = <18>; - exec-units-mask = <000000fe>; - descriptor-types-mask = <012b0ebf>; + channel-fifo-len = <24>; + exec-units-mask = <0xfe>; + descriptor-types-mask = <0x12b0ebf>; }; mpic: pic@40000 { @@ -209,73 +206,73 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <40000 40000>; + reg = <0x40000 0x40000>; compatible = "chrp,open-pic"; device_type = "open-pic"; big-endian; }; par_io@e0100 { - reg = <e0100 100>; + reg = <0xe0100 0x100>; device_type = "par_io"; num-ports = <7>; pio1: ucc_pin@01 { pio-map = < /* port pin dir open_drain assignment has_irq */ - 4 0a 1 0 2 0 /* TxD0 */ - 4 09 1 0 2 0 /* TxD1 */ - 4 08 1 0 2 0 /* TxD2 */ - 4 07 1 0 2 0 /* TxD3 */ - 4 17 1 0 2 0 /* TxD4 */ - 4 16 1 0 2 0 /* TxD5 */ - 4 15 1 0 2 0 /* TxD6 */ - 4 14 1 0 2 0 /* TxD7 */ - 4 0f 2 0 2 0 /* RxD0 */ - 4 0e 2 0 2 0 /* RxD1 */ - 4 0d 2 0 2 0 /* RxD2 */ - 4 0c 2 0 2 0 /* RxD3 */ - 4 1d 2 0 2 0 /* RxD4 */ - 4 1c 2 0 2 0 /* RxD5 */ - 4 1b 2 0 2 0 /* RxD6 */ - 4 1a 2 0 2 0 /* RxD7 */ - 4 0b 1 0 2 0 /* TX_EN */ - 4 18 1 0 2 0 /* TX_ER */ - 4 10 2 0 2 0 /* RX_DV */ - 4 1e 2 0 2 0 /* RX_ER */ - 4 11 2 0 2 0 /* RX_CLK */ - 4 13 1 0 2 0 /* GTX_CLK */ - 1 1f 2 0 3 0>; /* GTX125 */ + 0x4 0xa 0x1 0x0 0x2 0x0 /* TxD0 */ + 0x4 0x9 0x1 0x0 0x2 0x0 /* TxD1 */ + 0x4 0x8 0x1 0x0 0x2 0x0 /* TxD2 */ + 0x4 0x7 0x1 0x0 0x2 0x0 /* TxD3 */ + 0x4 0x17 0x1 0x0 0x2 0x0 /* TxD4 */ + 0x4 0x16 0x1 0x0 0x2 0x0 /* TxD5 */ + 0x4 0x15 0x1 0x0 0x2 0x0 /* TxD6 */ + 0x4 0x14 0x1 0x0 0x2 0x0 /* TxD7 */ + 0x4 0xf 0x2 0x0 0x2 0x0 /* RxD0 */ + 0x4 0xe 0x2 0x0 0x2 0x0 /* RxD1 */ + 0x4 0xd 0x2 0x0 0x2 0x0 /* RxD2 */ + 0x4 0xc 0x2 0x0 0x2 0x0 /* RxD3 */ + 0x4 0x1d 0x2 0x0 0x2 0x0 /* RxD4 */ + 0x4 0x1c 0x2 0x0 0x2 0x0 /* RxD5 */ + 0x4 0x1b 0x2 0x0 0x2 0x0 /* RxD6 */ + 0x4 0x1a 0x2 0x0 0x2 0x0 /* RxD7 */ + 0x4 0xb 0x1 0x0 0x2 0x0 /* TX_EN */ + 0x4 0x18 0x1 0x0 0x2 0x0 /* TX_ER */ + 0x4 0x10 0x2 0x0 0x2 0x0 /* RX_DV */ + 0x4 0x1e 0x2 0x0 0x2 0x0 /* RX_ER */ + 0x4 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */ + 0x4 0x13 0x1 0x0 0x2 0x0 /* GTX_CLK */ + 0x1 0x1f 0x2 0x0 0x3 0x0>; /* GTX125 */ }; pio2: ucc_pin@02 { pio-map = < /* port pin dir open_drain assignment has_irq */ - 5 0a 1 0 2 0 /* TxD0 */ - 5 09 1 0 2 0 /* TxD1 */ - 5 08 1 0 2 0 /* TxD2 */ - 5 07 1 0 2 0 /* TxD3 */ - 5 17 1 0 2 0 /* TxD4 */ - 5 16 1 0 2 0 /* TxD5 */ - 5 15 1 0 2 0 /* TxD6 */ - 5 14 1 0 2 0 /* TxD7 */ - 5 0f 2 0 2 0 /* RxD0 */ - 5 0e 2 0 2 0 /* RxD1 */ - 5 0d 2 0 2 0 /* RxD2 */ - 5 0c 2 0 2 0 /* RxD3 */ - 5 1d 2 0 2 0 /* RxD4 */ - 5 1c 2 0 2 0 /* RxD5 */ - 5 1b 2 0 2 0 /* RxD6 */ - 5 1a 2 0 2 0 /* RxD7 */ - 5 0b 1 0 2 0 /* TX_EN */ - 5 18 1 0 2 0 /* TX_ER */ - 5 10 2 0 2 0 /* RX_DV */ - 5 1e 2 0 2 0 /* RX_ER */ - 5 11 2 0 2 0 /* RX_CLK */ - 5 13 1 0 2 0 /* GTX_CLK */ - 1 1f 2 0 3 0 /* GTX125 */ - 4 06 3 0 2 0 /* MDIO */ - 4 05 1 0 2 0>; /* MDC */ + 0x5 0xa 0x1 0x0 0x2 0x0 /* TxD0 */ + 0x5 0x9 0x1 0x0 0x2 0x0 /* TxD1 */ + 0x5 0x8 0x1 0x0 0x2 0x0 /* TxD2 */ + 0x5 0x7 0x1 0x0 0x2 0x0 /* TxD3 */ + 0x5 0x17 0x1 0x0 0x2 0x0 /* TxD4 */ + 0x5 0x16 0x1 0x0 0x2 0x0 /* TxD5 */ + 0x5 0x15 0x1 0x0 0x2 0x0 /* TxD6 */ + 0x5 0x14 0x1 0x0 0x2 0x0 /* TxD7 */ + 0x5 0xf 0x2 0x0 0x2 0x0 /* RxD0 */ + 0x5 0xe 0x2 0x0 0x2 0x0 /* RxD1 */ + 0x5 0xd 0x2 0x0 0x2 0x0 /* RxD2 */ + 0x5 0xc 0x2 0x0 0x2 0x0 /* RxD3 */ + 0x5 0x1d 0x2 0x0 0x2 0x0 /* RxD4 */ + 0x5 0x1c 0x2 0x0 0x2 0x0 /* RxD5 */ + 0x5 0x1b 0x2 0x0 0x2 0x0 /* RxD6 */ + 0x5 0x1a 0x2 0x0 0x2 0x0 /* RxD7 */ + 0x5 0xb 0x1 0x0 0x2 0x0 /* TX_EN */ + 0x5 0x18 0x1 0x0 0x2 0x0 /* TX_ER */ + 0x5 0x10 0x2 0x0 0x2 0x0 /* RX_DV */ + 0x5 0x1e 0x2 0x0 0x2 0x0 /* RX_ER */ + 0x5 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */ + 0x5 0x13 0x1 0x0 0x2 0x0 /* GTX_CLK */ + 0x1 0x1f 0x2 0x0 0x3 0x0 /* GTX125 */ + 0x4 0x6 0x3 0x0 0x2 0x0 /* MDIO */ + 0x4 0x5 0x1 0x0 0x2 0x0>; /* MDC */ }; }; }; @@ -285,28 +282,28 @@ #size-cells = <1>; device_type = "qe"; compatible = "fsl,qe"; - ranges = <0 e0080000 00040000>; - reg = <e0080000 480>; + ranges = <0x0 0xe0080000 0x40000>; + reg = <0xe0080000 0x480>; brg-frequency = <0>; - bus-frequency = <179A7B00>; + bus-frequency = <396000000>; muram@10000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,qe-muram", "fsl,cpm-muram"; - ranges = <0 00010000 0000c000>; + ranges = <0x0 0x10000 0x10000>; data-only@0 { compatible = "fsl,qe-muram-data", "fsl,cpm-muram-data"; - reg = <0 c000>; + reg = <0x0 0x10000>; }; }; spi@4c0 { cell-index = <0>; compatible = "fsl,spi"; - reg = <4c0 40>; + reg = <0x4c0 0x40>; interrupts = <2>; interrupt-parent = <&qeic>; mode = "cpu"; @@ -315,7 +312,7 @@ spi@500 { cell-index = <1>; compatible = "fsl,spi"; - reg = <500 40>; + reg = <0x500 0x40>; interrupts = <1>; interrupt-parent = <&qeic>; mode = "cpu"; @@ -324,11 +321,9 @@ enet2: ucc@2000 { device_type = "network"; compatible = "ucc_geth"; - model = "UCC"; cell-index = <1>; - device-id = <1>; - reg = <2000 200>; - interrupts = <20>; + reg = <0x2000 0x200>; + interrupts = <32>; interrupt-parent = <&qeic>; local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock-name = "none"; @@ -341,11 +336,9 @@ enet3: ucc@3000 { device_type = "network"; compatible = "ucc_geth"; - model = "UCC"; cell-index = <2>; - device-id = <2>; - reg = <3000 200>; - interrupts = <21>; + reg = <0x3000 0x200>; + interrupts = <33>; interrupt-parent = <&qeic>; local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock-name = "none"; @@ -358,7 +351,7 @@ mdio@2120 { #address-cells = <1>; #size-cells = <0>; - reg = <2120 18>; + reg = <0x2120 0x18>; compatible = "fsl,ucc-mdio"; /* These are the same PHYs as on @@ -366,25 +359,25 @@ qe_phy0: ethernet-phy@07 { interrupt-parent = <&mpic>; interrupts = <1 1>; - reg = <7>; + reg = <0x7>; device_type = "ethernet-phy"; }; qe_phy1: ethernet-phy@01 { interrupt-parent = <&mpic>; interrupts = <2 1>; - reg = <1>; + reg = <0x1>; device_type = "ethernet-phy"; }; qe_phy2: ethernet-phy@02 { interrupt-parent = <&mpic>; interrupts = <1 1>; - reg = <2>; + reg = <0x2>; device_type = "ethernet-phy"; }; qe_phy3: ethernet-phy@03 { interrupt-parent = <&mpic>; interrupts = <2 1>; - reg = <3>; + reg = <0x3>; device_type = "ethernet-phy"; }; }; @@ -394,9 +387,9 @@ compatible = "fsl,qe-ic"; #address-cells = <0>; #interrupt-cells = <1>; - reg = <80 80>; + reg = <0x80 0x80>; big-endian; - interrupts = <2e 2 2e 2>; //high:30 low:30 + interrupts = <46 2 46 2>; //high:30 low:30 interrupt-parent = <&mpic>; }; @@ -404,30 +397,30 @@ pci0: pci@e0008000 { cell-index = <0>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x12 AD18 */ - 9000 0 0 1 &mpic 5 1 - 9000 0 0 2 &mpic 6 1 - 9000 0 0 3 &mpic 7 1 - 9000 0 0 4 &mpic 4 1 + 0x9000 0x0 0x0 0x1 &mpic 0x5 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x6 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x7 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 /* IDSEL 0x13 AD19 */ - 9800 0 0 1 &mpic 6 1 - 9800 0 0 2 &mpic 7 1 - 9800 0 0 3 &mpic 4 1 - 9800 0 0 4 &mpic 5 1>; + 0x9800 0x0 0x0 0x1 &mpic 0x6 0x1 + 0x9800 0x0 0x0 0x2 &mpic 0x7 0x1 + 0x9800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x9800 0x0 0x0 0x4 &mpic 0x5 0x1>; interrupt-parent = <&mpic>; - interrupts = <18 2>; - bus-range = <0 ff>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e2000000 0 00800000>; - clock-frequency = <3f940aa>; + interrupts = <24 2>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0008000 1000>; + reg = <0xe0008000 0x1000>; compatible = "fsl,mpc8540-pci"; device_type = "pci"; }; @@ -435,39 +428,39 @@ /* PCI Express */ pci1: pcie@e000a000 { cell-index = <2>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0 (PEX) */ - 00000 0 0 1 &mpic 0 1 - 00000 0 0 2 &mpic 1 1 - 00000 0 0 3 &mpic 2 1 - 00000 0 0 4 &mpic 3 1>; + 00000 0x0 0x0 0x1 &mpic 0x0 0x1 + 00000 0x0 0x0 0x2 &mpic 0x1 0x1 + 00000 0x0 0x0 0x3 &mpic 0x2 0x1 + 00000 0x0 0x0 0x4 &mpic 0x3 0x1>; interrupt-parent = <&mpic>; - interrupts = <1a 2>; - bus-range = <0 ff>; - ranges = <02000000 0 a0000000 a0000000 0 10000000 - 01000000 0 00000000 e2800000 0 00800000>; - clock-frequency = <1fca055>; + interrupts = <26 2>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>; + clock-frequency = <33333333>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e000a000 1000>; + reg = <0xe000a000 0x1000>; compatible = "fsl,mpc8548-pcie"; device_type = "pci"; pcie@0 { - reg = <0 0 0 0 0>; + reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - ranges = <02000000 0 a0000000 - 02000000 0 a0000000 - 0 10000000 + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x10000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00800000>; + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x800000>; }; }; }; diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts index db37214aee37..66f27ab613a2 100644 --- a/arch/powerpc/boot/dts/mpc8572ds.dts +++ b/arch/powerpc/boot/dts/mpc8572ds.dts @@ -1,7 +1,7 @@ /* * MPC8572 DS Device Tree Source * - * Copyright 2007 Freescale Semiconductor Inc. + * Copyright 2007, 2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,6 +9,7 @@ * option) any later version. */ +/dts-v1/; / { model = "fsl,MPC8572DS"; compatible = "fsl,MPC8572DS"; @@ -33,11 +34,11 @@ PowerPC,8572@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; @@ -45,11 +46,11 @@ PowerPC,8572@1 { device_type = "cpu"; - reg = <1>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K + reg = <0x1>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; @@ -58,38 +59,38 @@ memory { device_type = "memory"; - reg = <00000000 00000000>; // Filled by U-Boot + reg = <0x0 0x0>; // Filled by U-Boot }; soc8572@ffe00000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <00000000 ffe00000 00100000>; - reg = <ffe00000 00001000>; // CCSRBAR & soc regs, remove once parse code for immrbase fixed + ranges = <0x0 0xffe00000 0x100000>; + reg = <0xffe00000 0x1000>; // CCSRBAR & soc regs, remove once parse code for immrbase fixed bus-frequency = <0>; // Filled out by uboot. memory-controller@2000 { compatible = "fsl,mpc8572-memory-controller"; - reg = <2000 1000>; + reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; - interrupts = <12 2>; + interrupts = <18 2>; }; memory-controller@6000 { compatible = "fsl,mpc8572-memory-controller"; - reg = <6000 1000>; + reg = <0x6000 0x1000>; interrupt-parent = <&mpic>; - interrupts = <12 2>; + interrupts = <18 2>; }; l2-cache-controller@20000 { compatible = "fsl,mpc8572-l2-cache-controller"; - reg = <20000 1000>; - cache-line-size = <20>; // 32 bytes - cache-size = <80000>; // L2, 512K + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K interrupt-parent = <&mpic>; - interrupts = <10 2>; + interrupts = <16 2>; }; i2c@3000 { @@ -97,8 +98,8 @@ #size-cells = <0>; cell-index = <0>; compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = <2b 2>; + reg = <0x3000 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -108,8 +109,8 @@ #size-cells = <0>; cell-index = <1>; compatible = "fsl-i2c"; - reg = <3100 100>; - interrupts = <2b 2>; + reg = <0x3100 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -118,27 +119,27 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-mdio"; - reg = <24520 20>; + reg = <0x24520 0x20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; - interrupts = <a 1>; - reg = <0>; + interrupts = <10 1>; + reg = <0x0>; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; - interrupts = <a 1>; - reg = <1>; + interrupts = <10 1>; + reg = <0x1>; }; phy2: ethernet-phy@2 { interrupt-parent = <&mpic>; - interrupts = <a 1>; - reg = <2>; + interrupts = <10 1>; + reg = <0x2>; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; - interrupts = <a 1>; - reg = <3>; + interrupts = <10 1>; + reg = <0x3>; }; }; @@ -147,9 +148,9 @@ device_type = "network"; model = "eTSEC"; compatible = "gianfar"; - reg = <24000 1000>; + reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1d 2 1e 2 22 2>; + interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; @@ -160,9 +161,9 @@ device_type = "network"; model = "eTSEC"; compatible = "gianfar"; - reg = <25000 1000>; + reg = <0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <23 2 24 2 28 2>; + interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; @@ -173,9 +174,9 @@ device_type = "network"; model = "eTSEC"; compatible = "gianfar"; - reg = <26000 1000>; + reg = <0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1f 2 20 2 21 2>; + interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; phy-handle = <&phy2>; phy-connection-type = "rgmii-id"; @@ -186,9 +187,9 @@ device_type = "network"; model = "eTSEC"; compatible = "gianfar"; - reg = <27000 1000>; + reg = <0x27000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <25 2 26 2 27 2>; + interrupts = <37 2 38 2 39 2>; interrupt-parent = <&mpic>; phy-handle = <&phy3>; phy-connection-type = "rgmii-id"; @@ -198,9 +199,9 @@ cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; + reg = <0x4500 0x100>; clock-frequency = <0>; - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; @@ -208,15 +209,15 @@ cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <4600 100>; + reg = <0x4600 0x100>; clock-frequency = <0>; - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; global-utilities@e0000 { //global utilities block compatible = "fsl,mpc8572-guts"; - reg = <e0000 1000>; + reg = <0xe0000 0x1000>; fsl,has-rstcr; }; @@ -225,7 +226,7 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <40000 40000>; + reg = <0x40000 0x40000>; compatible = "chrp,open-pic"; device_type = "open-pic"; big-endian; @@ -239,167 +240,167 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <ffe08000 1000>; - bus-range = <0 ff>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 ffc00000 0 00010000>; - clock-frequency = <1fca055>; + reg = <0xffe08000 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xffc00000 0x0 0x10000>; + clock-frequency = <33333333>; interrupt-parent = <&mpic>; - interrupts = <18 2>; - interrupt-map-mask = <ff00 0 0 7>; + interrupts = <24 2>; + interrupt-map-mask = <0xff00 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x11 func 0 - PCI slot 1 */ - 8800 0 0 1 &mpic 2 1 - 8800 0 0 2 &mpic 3 1 - 8800 0 0 3 &mpic 4 1 - 8800 0 0 4 &mpic 1 1 + 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x11 func 1 - PCI slot 1 */ - 8900 0 0 1 &mpic 2 1 - 8900 0 0 2 &mpic 3 1 - 8900 0 0 3 &mpic 4 1 - 8900 0 0 4 &mpic 1 1 + 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x11 func 2 - PCI slot 1 */ - 8a00 0 0 1 &mpic 2 1 - 8a00 0 0 2 &mpic 3 1 - 8a00 0 0 3 &mpic 4 1 - 8a00 0 0 4 &mpic 1 1 + 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x11 func 3 - PCI slot 1 */ - 8b00 0 0 1 &mpic 2 1 - 8b00 0 0 2 &mpic 3 1 - 8b00 0 0 3 &mpic 4 1 - 8b00 0 0 4 &mpic 1 1 + 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x11 func 4 - PCI slot 1 */ - 8c00 0 0 1 &mpic 2 1 - 8c00 0 0 2 &mpic 3 1 - 8c00 0 0 3 &mpic 4 1 - 8c00 0 0 4 &mpic 1 1 + 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x11 func 5 - PCI slot 1 */ - 8d00 0 0 1 &mpic 2 1 - 8d00 0 0 2 &mpic 3 1 - 8d00 0 0 3 &mpic 4 1 - 8d00 0 0 4 &mpic 1 1 + 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x11 func 6 - PCI slot 1 */ - 8e00 0 0 1 &mpic 2 1 - 8e00 0 0 2 &mpic 3 1 - 8e00 0 0 3 &mpic 4 1 - 8e00 0 0 4 &mpic 1 1 + 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x11 func 7 - PCI slot 1 */ - 8f00 0 0 1 &mpic 2 1 - 8f00 0 0 2 &mpic 3 1 - 8f00 0 0 3 &mpic 4 1 - 8f00 0 0 4 &mpic 1 1 + 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x12 func 0 - PCI slot 2 */ - 9000 0 0 1 &mpic 3 1 - 9000 0 0 2 &mpic 4 1 - 9000 0 0 3 &mpic 1 1 - 9000 0 0 4 &mpic 2 1 + 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 0x12 func 1 - PCI slot 2 */ - 9100 0 0 1 &mpic 3 1 - 9100 0 0 2 &mpic 4 1 - 9100 0 0 3 &mpic 1 1 - 9100 0 0 4 &mpic 2 1 + 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 0x12 func 2 - PCI slot 2 */ - 9200 0 0 1 &mpic 3 1 - 9200 0 0 2 &mpic 4 1 - 9200 0 0 3 &mpic 1 1 - 9200 0 0 4 &mpic 2 1 + 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 0x12 func 3 - PCI slot 2 */ - 9300 0 0 1 &mpic 3 1 - 9300 0 0 2 &mpic 4 1 - 9300 0 0 3 &mpic 1 1 - 9300 0 0 4 &mpic 2 1 + 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 0x12 func 4 - PCI slot 2 */ - 9400 0 0 1 &mpic 3 1 - 9400 0 0 2 &mpic 4 1 - 9400 0 0 3 &mpic 1 1 - 9400 0 0 4 &mpic 2 1 + 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 0x12 func 5 - PCI slot 2 */ - 9500 0 0 1 &mpic 3 1 - 9500 0 0 2 &mpic 4 1 - 9500 0 0 3 &mpic 1 1 - 9500 0 0 4 &mpic 2 1 + 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 0x12 func 6 - PCI slot 2 */ - 9600 0 0 1 &mpic 3 1 - 9600 0 0 2 &mpic 4 1 - 9600 0 0 3 &mpic 1 1 - 9600 0 0 4 &mpic 2 1 + 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 0x12 func 7 - PCI slot 2 */ - 9700 0 0 1 &mpic 3 1 - 9700 0 0 2 &mpic 4 1 - 9700 0 0 3 &mpic 1 1 - 9700 0 0 4 &mpic 2 1 + 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1 // IDSEL 0x1c USB - e000 0 0 1 &i8259 c 2 - e100 0 0 2 &i8259 9 2 - e200 0 0 3 &i8259 a 2 - e300 0 0 4 &i8259 b 2 + 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2 + 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2 + 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2 + 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2 // IDSEL 0x1d Audio - e800 0 0 1 &i8259 6 2 + 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 // IDSEL 0x1e Legacy - f000 0 0 1 &i8259 7 2 - f100 0 0 1 &i8259 7 2 + 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 + 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 // IDSEL 0x1f IDE/SATA - f800 0 0 1 &i8259 e 2 - f900 0 0 1 &i8259 5 2 + 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 + 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 >; pcie@0 { - reg = <0 0 0 0 0>; + reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - ranges = <02000000 0 80000000 - 02000000 0 80000000 - 0 20000000 + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00100000>; + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; uli1575@0 { - reg = <0 0 0 0 0>; + reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; - ranges = <02000000 0 80000000 - 02000000 0 80000000 - 0 20000000 + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00100000>; + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; isa@1e { device_type = "isa"; #interrupt-cells = <2>; #size-cells = <1>; #address-cells = <2>; - reg = <f000 0 0 0 0>; - ranges = <1 0 01000000 0 0 - 00001000>; + reg = <0xf000 0x0 0x0 0x0 0x0>; + ranges = <0x1 0x0 0x1000000 0x0 0x0 + 0x1000>; interrupt-parent = <&i8259>; i8259: interrupt-controller@20 { - reg = <1 20 2 - 1 a0 2 - 1 4d0 2>; + reg = <0x1 0x20 0x2 + 0x1 0xa0 0x2 + 0x1 0x4d0 0x2>; interrupt-controller; device_type = "interrupt-controller"; #address-cells = <0>; @@ -412,29 +413,29 @@ i8042@60 { #size-cells = <0>; #address-cells = <1>; - reg = <1 60 1 1 64 1>; - interrupts = <1 3 c 3>; + reg = <0x1 0x60 0x1 0x1 0x64 0x1>; + interrupts = <1 3 12 3>; interrupt-parent = <&i8259>; keyboard@0 { - reg = <0>; + reg = <0x0>; compatible = "pnpPNP,303"; }; mouse@1 { - reg = <1>; + reg = <0x1>; compatible = "pnpPNP,f03"; }; }; rtc@70 { compatible = "pnpPNP,b00"; - reg = <1 70 2>; + reg = <0x1 0x70 0x2>; }; gpio@400 { - reg = <1 400 80>; + reg = <0x1 0x400 0x80>; }; }; }; @@ -449,33 +450,33 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <ffe09000 1000>; - bus-range = <0 ff>; - ranges = <02000000 0 a0000000 a0000000 0 20000000 - 01000000 0 00000000 ffc10000 0 00010000>; - clock-frequency = <1fca055>; + reg = <0xffe09000 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xffc10000 0x0 0x10000>; + clock-frequency = <33333333>; interrupt-parent = <&mpic>; - interrupts = <1a 2>; - interrupt-map-mask = <f800 0 0 7>; + interrupts = <26 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 4 1 - 0000 0 0 2 &mpic 5 1 - 0000 0 0 3 &mpic 6 1 - 0000 0 0 4 &mpic 7 1 + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 >; pcie@0 { - reg = <0 0 0 0 0>; + reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - ranges = <02000000 0 a0000000 - 02000000 0 a0000000 - 0 20000000 + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00100000>; + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; }; }; @@ -486,33 +487,33 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <ffe0a000 1000>; - bus-range = <0 ff>; - ranges = <02000000 0 c0000000 c0000000 0 20000000 - 01000000 0 00000000 ffc20000 0 00010000>; - clock-frequency = <1fca055>; + reg = <0xffe0a000 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xffc20000 0x0 0x10000>; + clock-frequency = <33333333>; interrupt-parent = <&mpic>; - interrupts = <1b 2>; - interrupt-map-mask = <f800 0 0 7>; + interrupts = <27 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 0 1 - 0000 0 0 2 &mpic 1 1 - 0000 0 0 3 &mpic 2 1 - 0000 0 0 4 &mpic 3 1 + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 >; pcie@0 { - reg = <0 0 0 0 0>; + reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - ranges = <02000000 0 c0000000 - 02000000 0 c0000000 - 0 20000000 + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00100000>; + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; }; }; }; diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts index 79385bcd5c5f..7f9b999843ce 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -13,7 +13,7 @@ / { model = "MPC8641HPCN"; - compatible = "mpc86xx"; + compatible = "fsl,mpc8641hpcn"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/powerpc/boot/dts/mpc866ads.dts b/arch/powerpc/boot/dts/mpc866ads.dts index daf9433e906b..765e43c997da 100644 --- a/arch/powerpc/boot/dts/mpc866ads.dts +++ b/arch/powerpc/boot/dts/mpc866ads.dts @@ -2,6 +2,7 @@ * MPC866 ADS Device Tree Source * * Copyright 2006 MontaVista Software, Inc. + * Copyright 2008 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,6 +10,7 @@ * option) any later version. */ +/dts-v1/; / { model = "MPC866ADS"; @@ -22,37 +24,37 @@ PowerPC,866@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <10>; // 16 bytes - i-cache-line-size = <10>; // 16 bytes - d-cache-size = <2000>; // L1, 8K - i-cache-size = <4000>; // L1, 16K + reg = <0x0>; + d-cache-line-size = <16>; // 16 bytes + i-cache-line-size = <16>; // 16 bytes + d-cache-size = <0x2000>; // L1, 8K + i-cache-size = <0x4000>; // L1, 16K timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; - interrupts = <f 2>; // decrementer interrupt + interrupts = <15 2>; // decrementer interrupt interrupt-parent = <&PIC>; }; }; memory { device_type = "memory"; - reg = <00000000 800000>; + reg = <0x0 0x800000>; }; localbus@ff000100 { compatible = "fsl,mpc866-localbus", "fsl,pq1-localbus"; #address-cells = <2>; #size-cells = <1>; - reg = <ff000100 40>; + reg = <0xff000100 0x40>; ranges = < - 1 0 ff080000 00008000 - 5 0 ff0a0000 00008000 + 0x1 0x0 0xff080000 0x8000 + 0x5 0x0 0xff0a0000 0x8000 >; board-control@1,0 { - reg = <1 0 20 5 300 4>; + reg = <0x1 0x0 0x20 0x5 0x300 0x4>; compatible = "fsl,mpc866ads-bcsr"; }; }; @@ -61,17 +63,17 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0 ff000000 00100000>; - reg = <ff000000 00000200>; + ranges = <0x0 0xff000000 0x100000>; + reg = <0xff000000 0x200>; bus-frequency = <0>; mdio@e00 { compatible = "fsl,mpc866-fec-mdio", "fsl,pq1-fec-mdio"; - reg = <e00 188>; + reg = <0xe00 0x188>; #address-cells = <1>; #size-cells = <0>; PHY: ethernet-phy@f { - reg = <f>; + reg = <0xf>; device_type = "ethernet-phy"; }; }; @@ -80,7 +82,7 @@ device_type = "network"; compatible = "fsl,mpc866-fec-enet", "fsl,pq1-fec-enet"; - reg = <e00 188>; + reg = <0xe00 0x188>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <3 1>; interrupt-parent = <&PIC>; @@ -91,7 +93,7 @@ PIC: pic@0 { interrupt-controller; #interrupt-cells = <2>; - reg = <0 24>; + reg = <0x0 0x24>; compatible = "fsl,mpc866-pic", "fsl,pq1-pic"; }; @@ -100,7 +102,7 @@ #size-cells = <1>; compatible = "fsl,mpc866-cpm", "fsl,cpm1"; ranges; - reg = <9c0 40>; + reg = <0x9c0 0x40>; brg-frequency = <0>; interrupts = <0 2>; // cpm error interrupt interrupt-parent = <&CPM_PIC>; @@ -108,11 +110,11 @@ muram@2000 { #address-cells = <1>; #size-cells = <1>; - ranges = <0 2000 2000>; + ranges = <0x0 0x2000 0x2000>; data@0 { compatible = "fsl,cpm-muram-data"; - reg = <0 1c00>; + reg = <0x0 0x1c00>; }; }; @@ -120,7 +122,7 @@ compatible = "fsl,mpc866-brg", "fsl,cpm1-brg", "fsl,cpm-brg"; - reg = <9f0 10>; + reg = <0x9f0 0x10>; clock-frequency = <0>; }; @@ -130,7 +132,7 @@ #interrupt-cells = <1>; interrupts = <5 2 0 2>; interrupt-parent = <&PIC>; - reg = <930 20>; + reg = <0x930 0x20>; compatible = "fsl,mpc866-cpm-pic", "fsl,cpm1-pic"; }; @@ -140,31 +142,31 @@ device_type = "serial"; compatible = "fsl,mpc866-smc-uart", "fsl,cpm1-smc-uart"; - reg = <a80 10 3e80 40>; + reg = <0xa80 0x10 0x3e80 0x40>; interrupts = <4>; interrupt-parent = <&CPM_PIC>; fsl,cpm-brg = <1>; - fsl,cpm-command = <0090>; + fsl,cpm-command = <0x90>; }; serial@a90 { device_type = "serial"; compatible = "fsl,mpc866-smc-uart", "fsl,cpm1-smc-uart"; - reg = <a90 10 3f80 40>; + reg = <0xa90 0x10 0x3f80 0x40>; interrupts = <3>; interrupt-parent = <&CPM_PIC>; fsl,cpm-brg = <2>; - fsl,cpm-command = <00d0>; + fsl,cpm-command = <0xd0>; }; ethernet@a00 { device_type = "network"; compatible = "fsl,mpc866-scc-enet", "fsl,cpm1-scc-enet"; - reg = <a00 18 3c00 100>; + reg = <0xa00 0x18 0x3c00 0x100>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1e>; + interrupts = <30>; interrupt-parent = <&CPM_PIC>; fsl,cpm-command = <0000>; linux,network-index = <1>; diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts index d84a012c2aaf..9895043722b9 100644 --- a/arch/powerpc/boot/dts/mpc885ads.dts +++ b/arch/powerpc/boot/dts/mpc885ads.dts @@ -2,7 +2,7 @@ * MPC885 ADS Device Tree Source * * Copyright 2006 MontaVista Software, Inc. - * Copyright 2007 Freescale Semiconductor, Inc. + * Copyright 2007,2008 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -10,6 +10,7 @@ * option) any later version. */ +/dts-v1/; / { model = "MPC885ADS"; @@ -23,45 +24,45 @@ PowerPC,885@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <d#16>; - i-cache-line-size = <d#16>; - d-cache-size = <d#8192>; - i-cache-size = <d#8192>; + reg = <0x0>; + d-cache-line-size = <16>; + i-cache-line-size = <16>; + d-cache-size = <8192>; + i-cache-size = <8192>; timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; - interrupts = <f 2>; // decrementer interrupt + interrupts = <15 2>; // decrementer interrupt interrupt-parent = <&PIC>; }; }; memory { device_type = "memory"; - reg = <0 0>; + reg = <0x0 0x0>; }; localbus@ff000100 { compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus"; #address-cells = <2>; #size-cells = <1>; - reg = <ff000100 40>; + reg = <0xff000100 0x40>; ranges = < - 0 0 fe000000 00800000 - 1 0 ff080000 00008000 - 5 0 ff0a0000 00008000 + 0x0 0x0 0xfe000000 0x800000 + 0x1 0x0 0xff080000 0x8000 + 0x5 0x0 0xff0a0000 0x8000 >; flash@0,0 { compatible = "jedec-flash"; - reg = <0 0 800000>; + reg = <0x0 0x0 0x800000>; bank-width = <4>; device-width = <1>; }; board-control@1,0 { - reg = <1 0 20 5 300 4>; + reg = <0x1 0x0 0x20 0x5 0x300 0x4>; compatible = "fsl,mpc885ads-bcsr"; }; }; @@ -71,30 +72,30 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0 ff000000 00004000>; + ranges = <0x0 0xff000000 0x4000>; bus-frequency = <0>; // Temporary -- will go away once kernel uses ranges for get_immrbase(). - reg = <ff000000 4000>; + reg = <0xff000000 0x4000>; mdio@e00 { compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio"; - reg = <e00 188>; + reg = <0xe00 0x188>; #address-cells = <1>; #size-cells = <0>; PHY0: ethernet-phy@0 { - reg = <0>; + reg = <0x0>; device_type = "ethernet-phy"; }; PHY1: ethernet-phy@1 { - reg = <1>; + reg = <0x1>; device_type = "ethernet-phy"; }; PHY2: ethernet-phy@2 { - reg = <2>; + reg = <0x2>; device_type = "ethernet-phy"; }; }; @@ -103,7 +104,7 @@ device_type = "network"; compatible = "fsl,mpc885-fec-enet", "fsl,pq1-fec-enet"; - reg = <e00 188>; + reg = <0xe00 0x188>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <3 1>; interrupt-parent = <&PIC>; @@ -115,7 +116,7 @@ device_type = "network"; compatible = "fsl,mpc885-fec-enet", "fsl,pq1-fec-enet"; - reg = <1e00 188>; + reg = <0x1e00 0x188>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <7 1>; interrupt-parent = <&PIC>; @@ -126,7 +127,7 @@ PIC: interrupt-controller@0 { interrupt-controller; #interrupt-cells = <2>; - reg = <0 24>; + reg = <0x0 0x24>; compatible = "fsl,mpc885-pic", "fsl,pq1-pic"; }; @@ -136,29 +137,29 @@ #size-cells = <2>; compatible = "fsl,pq-pcmcia"; device_type = "pcmcia"; - reg = <80 80>; + reg = <0x80 0x80>; interrupt-parent = <&PIC>; - interrupts = <d 1>; + interrupts = <13 1>; }; cpm@9c0 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc885-cpm", "fsl,cpm1"; - command-proc = <9c0>; + command-proc = <0x9c0>; interrupts = <0>; // cpm error interrupt interrupt-parent = <&CPM_PIC>; - reg = <9c0 40>; + reg = <0x9c0 0x40>; ranges; muram@2000 { #address-cells = <1>; #size-cells = <1>; - ranges = <0 2000 2000>; + ranges = <0x0 0x2000 0x2000>; data@0 { compatible = "fsl,cpm-muram-data"; - reg = <0 1c00>; + reg = <0x0 0x1c00>; }; }; @@ -167,7 +168,7 @@ "fsl,cpm1-brg", "fsl,cpm-brg"; clock-frequency = <0>; - reg = <9f0 10>; + reg = <0x9f0 0x10>; }; CPM_PIC: interrupt-controller@930 { @@ -175,7 +176,7 @@ #interrupt-cells = <1>; interrupts = <5 2 0 2>; interrupt-parent = <&PIC>; - reg = <930 20>; + reg = <0x930 0x20>; compatible = "fsl,mpc885-cpm-pic", "fsl,cpm1-pic"; }; @@ -184,34 +185,34 @@ device_type = "serial"; compatible = "fsl,mpc885-smc-uart", "fsl,cpm1-smc-uart"; - reg = <a80 10 3e80 40>; + reg = <0xa80 0x10 0x3e80 0x40>; interrupts = <4>; interrupt-parent = <&CPM_PIC>; fsl,cpm-brg = <1>; - fsl,cpm-command = <0090>; + fsl,cpm-command = <0x90>; }; serial@a90 { device_type = "serial"; compatible = "fsl,mpc885-smc-uart", "fsl,cpm1-smc-uart"; - reg = <a90 10 3f80 40>; + reg = <0xa90 0x10 0x3f80 0x40>; interrupts = <3>; interrupt-parent = <&CPM_PIC>; fsl,cpm-brg = <2>; - fsl,cpm-command = <00d0>; + fsl,cpm-command = <0xd0>; }; ethernet@a40 { device_type = "network"; compatible = "fsl,mpc885-scc-enet", "fsl,cpm1-scc-enet"; - reg = <a40 18 3e00 100>; + reg = <0xa40 0x18 0x3e00 0x100>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1c>; + interrupts = <28>; interrupt-parent = <&CPM_PIC>; phy-handle = <&PHY2>; - fsl,cpm-command = <0080>; + fsl,cpm-command = <0x80>; linux,network-index = <2>; }; }; diff --git a/arch/powerpc/boot/dts/pq2fads.dts b/arch/powerpc/boot/dts/pq2fads.dts index 2d564921897a..b2d61091b36d 100644 --- a/arch/powerpc/boot/dts/pq2fads.dts +++ b/arch/powerpc/boot/dts/pq2fads.dts @@ -1,7 +1,7 @@ /* * Device Tree for the PQ2FADS-ZU board with an MPC8280 chip. * - * Copyright 2007 Freescale Semiconductor Inc. + * Copyright 2007,2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,6 +9,8 @@ * option) any later version. */ +/dts-v1/; + / { model = "pq2fads"; compatible = "fsl,pq2fads"; @@ -21,11 +23,11 @@ cpu@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <d#32>; - i-cache-line-size = <d#32>; - d-cache-size = <d#16384>; - i-cache-size = <d#16384>; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <16384>; + i-cache-size = <16384>; timebase-frequency = <0>; clock-frequency = <0>; }; @@ -33,7 +35,7 @@ memory { device_type = "memory"; - reg = <0 0>; + reg = <0x0 0x0>; }; localbus@f0010100 { @@ -41,67 +43,67 @@ "fsl,pq2-localbus"; #address-cells = <2>; #size-cells = <1>; - reg = <f0010100 60>; + reg = <0xf0010100 0x60>; - ranges = <0 0 fe000000 00800000 - 1 0 f4500000 00008000 - 8 0 f8200000 00008000>; + ranges = <0x0 0x0 0xfe000000 0x800000 + 0x1 0x0 0xf4500000 0x8000 + 0x8 0x0 0xf8200000 0x8000>; flash@0,0 { compatible = "jedec-flash"; - reg = <0 0 800000>; + reg = <0x0 0x0 0x800000>; bank-width = <4>; device-width = <1>; }; bcsr@1,0 { - reg = <1 0 20>; + reg = <0x1 0x0 0x20>; compatible = "fsl,pq2fads-bcsr"; }; PCI_PIC: pic@8,0 { #interrupt-cells = <1>; interrupt-controller; - reg = <8 0 8>; + reg = <0x8 0x0 0x8>; compatible = "fsl,pq2ads-pci-pic"; interrupt-parent = <&PIC>; - interrupts = <18 8>; + interrupts = <24 8>; }; }; pci@f0010800 { device_type = "pci"; - reg = <f0010800 10c f00101ac 8 f00101c4 8>; + reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>; compatible = "fsl,mpc8280-pci", "fsl,pq2-pci"; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - clock-frequency = <d#66000000>; - interrupt-map-mask = <f800 0 0 7>; + clock-frequency = <66000000>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x16 */ - b000 0 0 1 &PCI_PIC 0 - b000 0 0 2 &PCI_PIC 1 - b000 0 0 3 &PCI_PIC 2 - b000 0 0 4 &PCI_PIC 3 + 0xb000 0x0 0x0 0x1 &PCI_PIC 0 + 0xb000 0x0 0x0 0x2 &PCI_PIC 1 + 0xb000 0x0 0x0 0x3 &PCI_PIC 2 + 0xb000 0x0 0x0 0x4 &PCI_PIC 3 /* IDSEL 0x17 */ - b800 0 0 1 &PCI_PIC 4 - b800 0 0 2 &PCI_PIC 5 - b800 0 0 3 &PCI_PIC 6 - b800 0 0 4 &PCI_PIC 7 + 0xb800 0x0 0x0 0x1 &PCI_PIC 4 + 0xb800 0x0 0x0 0x2 &PCI_PIC 5 + 0xb800 0x0 0x0 0x3 &PCI_PIC 6 + 0xb800 0x0 0x0 0x4 &PCI_PIC 7 /* IDSEL 0x18 */ - c000 0 0 1 &PCI_PIC 8 - c000 0 0 2 &PCI_PIC 9 - c000 0 0 3 &PCI_PIC a - c000 0 0 4 &PCI_PIC b>; + 0xc000 0x0 0x0 0x1 &PCI_PIC 8 + 0xc000 0x0 0x0 0x2 &PCI_PIC 9 + 0xc000 0x0 0x0 0x3 &PCI_PIC 10 + 0xc000 0x0 0x0 0x4 &PCI_PIC 11>; interrupt-parent = <&PIC>; - interrupts = <12 8>; - ranges = <42000000 0 80000000 80000000 0 20000000 - 02000000 0 a0000000 a0000000 0 20000000 - 01000000 0 00000000 f6000000 0 02000000>; + interrupts = <18 8>; + ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xf6000000 0x0 0x2000000>; }; soc@f0000000 { @@ -109,27 +111,27 @@ #size-cells = <1>; device_type = "soc"; compatible = "fsl,mpc8280", "fsl,pq2-soc"; - ranges = <00000000 f0000000 00053000>; + ranges = <0x0 0xf0000000 0x53000>; // Temporary -- will go away once kernel uses ranges for get_immrbase(). - reg = <f0000000 00053000>; + reg = <0xf0000000 0x53000>; cpm@119c0 { #address-cells = <1>; #size-cells = <1>; #interrupt-cells = <2>; compatible = "fsl,mpc8280-cpm", "fsl,cpm2"; - reg = <119c0 30>; + reg = <0x119c0 0x30>; ranges; muram@0 { #address-cells = <1>; #size-cells = <1>; - ranges = <0 0 10000>; + ranges = <0x0 0x0 0x10000>; data@0 { compatible = "fsl,cpm-muram-data"; - reg = <0 2000 9800 800>; + reg = <0x0 0x2000 0x9800 0x800>; }; }; @@ -137,53 +139,53 @@ compatible = "fsl,mpc8280-brg", "fsl,cpm2-brg", "fsl,cpm-brg"; - reg = <119f0 10 115f0 10>; + reg = <0x119f0 0x10 0x115f0 0x10>; }; serial@11a00 { device_type = "serial"; compatible = "fsl,mpc8280-scc-uart", "fsl,cpm2-scc-uart"; - reg = <11a00 20 8000 100>; - interrupts = <28 8>; + reg = <0x11a00 0x20 0x8000 0x100>; + interrupts = <40 8>; interrupt-parent = <&PIC>; fsl,cpm-brg = <1>; - fsl,cpm-command = <00800000>; + fsl,cpm-command = <0x800000>; }; serial@11a20 { device_type = "serial"; compatible = "fsl,mpc8280-scc-uart", "fsl,cpm2-scc-uart"; - reg = <11a20 20 8100 100>; - interrupts = <29 8>; + reg = <0x11a20 0x20 0x8100 0x100>; + interrupts = <41 8>; interrupt-parent = <&PIC>; fsl,cpm-brg = <2>; - fsl,cpm-command = <04a00000>; + fsl,cpm-command = <0x4a00000>; }; ethernet@11320 { device_type = "network"; compatible = "fsl,mpc8280-fcc-enet", "fsl,cpm2-fcc-enet"; - reg = <11320 20 8500 100 113b0 1>; - interrupts = <21 8>; + reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>; + interrupts = <33 8>; interrupt-parent = <&PIC>; phy-handle = <&PHY0>; linux,network-index = <0>; - fsl,cpm-command = <16200300>; + fsl,cpm-command = <0x16200300>; }; ethernet@11340 { device_type = "network"; compatible = "fsl,mpc8280-fcc-enet", "fsl,cpm2-fcc-enet"; - reg = <11340 20 8600 100 113d0 1>; - interrupts = <22 8>; + reg = <0x11340 0x20 0x8600 0x100 0x113d0 0x1>; + interrupts = <34 8>; interrupt-parent = <&PIC>; phy-handle = <&PHY1>; linux,network-index = <1>; - fsl,cpm-command = <1a400300>; + fsl,cpm-command = <0x1a400300>; local-mac-address = [00 e0 0c 00 79 01]; }; @@ -194,21 +196,21 @@ "fsl,cpm2-mdio-bitbang"; #address-cells = <1>; #size-cells = <0>; - reg = <10d40 14>; + reg = <0x10d40 0x14>; fsl,mdio-pin = <9>; - fsl,mdc-pin = <a>; + fsl,mdc-pin = <10>; PHY0: ethernet-phy@0 { interrupt-parent = <&PIC>; - interrupts = <19 2>; - reg = <0>; + interrupts = <25 2>; + reg = <0x0>; device_type = "ethernet-phy"; }; PHY1: ethernet-phy@1 { interrupt-parent = <&PIC>; - interrupts = <19 2>; - reg = <3>; + interrupts = <25 2>; + reg = <0x3>; device_type = "ethernet-phy"; }; }; @@ -218,17 +220,17 @@ #size-cells = <0>; compatible = "fsl,mpc8280-usb", "fsl,cpm2-usb"; - reg = <11b60 18 8b00 100>; + reg = <0x11b60 0x18 0x8b00 0x100>; interrupt-parent = <&PIC>; - interrupts = <b 8>; - fsl,cpm-command = <2e600000>; + interrupts = <11 8>; + fsl,cpm-command = <0x2e600000>; }; }; PIC: interrupt-controller@10c00 { #interrupt-cells = <2>; interrupt-controller; - reg = <10c00 80>; + reg = <0x10c00 0x80>; compatible = "fsl,mpc8280-pic", "fsl,cpm2-pic"; }; diff --git a/arch/powerpc/boot/dts/prpmc2800.dts b/arch/powerpc/boot/dts/prpmc2800.dts index 297dfa53fe9e..1ee6ff43dd57 100644 --- a/arch/powerpc/boot/dts/prpmc2800.dts +++ b/arch/powerpc/boot/dts/prpmc2800.dts @@ -11,6 +11,8 @@ * if it can determine the exact PrPMC type. */ +/dts-v1/; + / { #address-cells = <1>; #size-cells = <1>; @@ -25,46 +27,46 @@ PowerPC,7447 { device_type = "cpu"; reg = <0>; - clock-frequency = <2bb0b140>; /* Default (733 MHz) */ - bus-frequency = <7f28155>; /* 133.333333 MHz */ - timebase-frequency = <1fca055>; /* 33.333333 MHz */ - i-cache-line-size = <20>; - d-cache-line-size = <20>; - i-cache-size = <8000>; - d-cache-size = <8000>; + clock-frequency = <733333333>; /* Default */ + bus-frequency = <133333333>; + timebase-frequency = <33333333>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; }; }; memory { device_type = "memory"; - reg = <00000000 20000000>; /* Default (512MB) */ + reg = <0x0 0x20000000>; /* Default (512MB) */ }; - mv64x60@f1000000 { /* Marvell Discovery */ + system-controller@f1000000 { /* Marvell Discovery mv64360 */ #address-cells = <1>; #size-cells = <1>; model = "mv64360"; /* Default */ - compatible = "marvell,mv64x60"; - clock-frequency = <7f28155>; /* 133.333333 MHz */ - reg = <f1000000 00010000>; - virtual-reg = <f1000000>; - ranges = <88000000 88000000 01000000 /* PCI 0 I/O Space */ - 80000000 80000000 08000000 /* PCI 0 MEM Space */ - a0000000 a0000000 04000000 /* User FLASH */ - 00000000 f1000000 00010000 /* Bridge's regs */ - f2000000 f2000000 00040000>; /* Integrated SRAM */ + compatible = "marvell,mv64360"; + clock-frequency = <133333333>; + reg = <0xf1000000 0x10000>; + virtual-reg = <0xf1000000>; + ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */ + 0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */ + 0xa0000000 0xa0000000 0x4000000 /* User FLASH */ + 0x00000000 0xf1000000 0x0010000 /* Bridge's regs */ + 0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */ flash@a0000000 { device_type = "rom"; compatible = "direct-mapped"; - reg = <a0000000 4000000>; /* Default (64MB) */ + reg = <0xa0000000 0x4000000>; /* Default (64MB) */ probe-type = "CFI"; bank-width = <4>; - partitions = <00000000 00100000 /* RO */ - 00100000 00040001 /* RW */ - 00140000 00400000 /* RO */ - 00540000 039c0000 /* RO */ - 03f00000 00100000>; /* RO */ + partitions = <0x00000000 0x00100000 /* RO */ + 0x00100000 0x00040001 /* RW */ + 0x00140000 0x00400000 /* RO */ + 0x00540000 0x039c0000 /* RO */ + 0x03f00000 0x00100000>; /* RO */ partition-names = "FW Image A", "FW Config Data", "Kernel Image", "Filesystem", "FW Image B"; }; @@ -72,171 +74,153 @@ #address-cells = <1>; #size-cells = <0>; device_type = "mdio"; - compatible = "marvell,mv64x60-mdio"; - ethernet-phy@1 { + compatible = "marvell,mv64360-mdio"; + PHY0: ethernet-phy@1 { device_type = "ethernet-phy"; compatible = "broadcom,bcm5421"; - interrupts = <4c>; /* GPP 12 */ - interrupt-parent = <&/mv64x60/pic>; + interrupts = <76>; /* GPP 12 */ + interrupt-parent = <&PIC>; reg = <1>; }; - ethernet-phy@3 { + PHY1: ethernet-phy@3 { device_type = "ethernet-phy"; compatible = "broadcom,bcm5421"; - interrupts = <4c>; /* GPP 12 */ - interrupt-parent = <&/mv64x60/pic>; + interrupts = <76>; /* GPP 12 */ + interrupt-parent = <&PIC>; reg = <3>; }; }; - ethernet@2000 { - reg = <2000 2000>; - eth0 { + ethernet-group@2000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,mv64360-eth-group"; + reg = <0x2000 0x2000>; + ethernet@0 { device_type = "network"; - compatible = "marvell,mv64x60-eth"; - block-index = <0>; - interrupts = <20>; - interrupt-parent = <&/mv64x60/pic>; - phy = <&/mv64x60/mdio/ethernet-phy@1>; + compatible = "marvell,mv64360-eth"; + reg = <0>; + interrupts = <32>; + interrupt-parent = <&PIC>; + phy = <&PHY0>; local-mac-address = [ 00 00 00 00 00 00 ]; }; - eth1 { + ethernet@1 { device_type = "network"; - compatible = "marvell,mv64x60-eth"; - block-index = <1>; - interrupts = <21>; - interrupt-parent = <&/mv64x60/pic>; - phy = <&/mv64x60/mdio/ethernet-phy@3>; + compatible = "marvell,mv64360-eth"; + reg = <1>; + interrupts = <33>; + interrupt-parent = <&PIC>; + phy = <&PHY1>; local-mac-address = [ 00 00 00 00 00 00 ]; }; }; - sdma@4000 { - device_type = "dma"; - compatible = "marvell,mv64x60-sdma"; - reg = <4000 c18>; - virtual-reg = <f1004000>; - interrupt-base = <0>; - interrupts = <24>; - interrupt-parent = <&/mv64x60/pic>; + SDMA0: sdma@4000 { + compatible = "marvell,mv64360-sdma"; + reg = <0x4000 0xc18>; + virtual-reg = <0xf1004000>; + interrupts = <36>; + interrupt-parent = <&PIC>; }; - sdma@6000 { - device_type = "dma"; - compatible = "marvell,mv64x60-sdma"; - reg = <6000 c18>; - virtual-reg = <f1006000>; - interrupt-base = <0>; - interrupts = <26>; - interrupt-parent = <&/mv64x60/pic>; + SDMA1: sdma@6000 { + compatible = "marvell,mv64360-sdma"; + reg = <0x6000 0xc18>; + virtual-reg = <0xf1006000>; + interrupts = <38>; + interrupt-parent = <&PIC>; }; - brg@b200 { - compatible = "marvell,mv64x60-brg"; - reg = <b200 8>; + BRG0: brg@b200 { + compatible = "marvell,mv64360-brg"; + reg = <0xb200 0x8>; clock-src = <8>; - clock-frequency = <7ed6b40>; - current-speed = <2580>; - bcr = <0>; + clock-frequency = <133333333>; + current-speed = <9600>; }; - brg@b208 { - compatible = "marvell,mv64x60-brg"; - reg = <b208 8>; + BRG1: brg@b208 { + compatible = "marvell,mv64360-brg"; + reg = <0xb208 0x8>; clock-src = <8>; - clock-frequency = <7ed6b40>; - current-speed = <2580>; - bcr = <0>; + clock-frequency = <133333333>; + current-speed = <9600>; }; - cunit@f200 { - reg = <f200 200>; + CUNIT: cunit@f200 { + reg = <0xf200 0x200>; }; - mpscrouting@b400 { - reg = <b400 c>; + MPSCROUTING: mpscrouting@b400 { + reg = <0xb400 0xc>; }; - mpscintr@b800 { - reg = <b800 100>; - virtual-reg = <f100b800>; + MPSCINTR: mpscintr@b800 { + reg = <0xb800 0x100>; + virtual-reg = <0xf100b800>; }; - mpsc@8000 { + MPSC0: mpsc@8000 { device_type = "serial"; - compatible = "marvell,mpsc"; - reg = <8000 38>; - virtual-reg = <f1008000>; - sdma = <&/mv64x60/sdma@4000>; - brg = <&/mv64x60/brg@b200>; - cunit = <&/mv64x60/cunit@f200>; - mpscrouting = <&/mv64x60/mpscrouting@b400>; - mpscintr = <&/mv64x60/mpscintr@b800>; - block-index = <0>; - max_idle = <28>; - chr_1 = <0>; - chr_2 = <0>; - chr_10 = <3>; - mpcr = <0>; - interrupts = <28>; - interrupt-parent = <&/mv64x60/pic>; + compatible = "marvell,mv64360-mpsc"; + reg = <0x8000 0x38>; + virtual-reg = <0xf1008000>; + sdma = <&SDMA0>; + brg = <&BRG0>; + cunit = <&CUNIT>; + mpscrouting = <&MPSCROUTING>; + mpscintr = <&MPSCINTR>; + cell-index = <0>; + interrupts = <40>; + interrupt-parent = <&PIC>; }; - mpsc@9000 { + MPSC1: mpsc@9000 { device_type = "serial"; - compatible = "marvell,mpsc"; - reg = <9000 38>; - virtual-reg = <f1009000>; - sdma = <&/mv64x60/sdma@6000>; - brg = <&/mv64x60/brg@b208>; - cunit = <&/mv64x60/cunit@f200>; - mpscrouting = <&/mv64x60/mpscrouting@b400>; - mpscintr = <&/mv64x60/mpscintr@b800>; - block-index = <1>; - max_idle = <28>; - chr_1 = <0>; - chr_2 = <0>; - chr_10 = <3>; - mpcr = <0>; - interrupts = <2a>; - interrupt-parent = <&/mv64x60/pic>; + compatible = "marvell,mv64360-mpsc"; + reg = <0x9000 0x38>; + virtual-reg = <0xf1009000>; + sdma = <&SDMA1>; + brg = <&BRG1>; + cunit = <&CUNIT>; + mpscrouting = <&MPSCROUTING>; + mpscintr = <&MPSCINTR>; + cell-index = <1>; + interrupts = <42>; + interrupt-parent = <&PIC>; }; wdt@b410 { /* watchdog timer */ - compatible = "marvell,mv64x60-wdt"; - reg = <b410 8>; - timeout = <a>; /* wdt timeout in seconds */ + compatible = "marvell,mv64360-wdt"; + reg = <0xb410 0x8>; }; i2c@c000 { device_type = "i2c"; - compatible = "marvell,mv64x60-i2c"; - reg = <c000 20>; - virtual-reg = <f100c000>; - freq_m = <8>; - freq_n = <3>; - timeout = <3e8>; /* 1000 = 1 second */ - retries = <1>; - interrupts = <25>; - interrupt-parent = <&/mv64x60/pic>; + compatible = "marvell,mv64360-i2c"; + reg = <0xc000 0x20>; + virtual-reg = <0xf100c000>; + interrupts = <37>; + interrupt-parent = <&PIC>; }; - pic { + PIC: pic { #interrupt-cells = <1>; #address-cells = <0>; - compatible = "marvell,mv64x60-pic"; - reg = <0000 88>; + compatible = "marvell,mv64360-pic"; + reg = <0x0 0x88>; interrupt-controller; }; mpp@f000 { - compatible = "marvell,mv64x60-mpp"; - reg = <f000 10>; + compatible = "marvell,mv64360-mpp"; + reg = <0xf000 0x10>; }; gpp@f100 { - compatible = "marvell,mv64x60-gpp"; - reg = <f100 20>; + compatible = "marvell,mv64360-gpp"; + reg = <0xf100 0x20>; }; pci@80000000 { @@ -244,73 +228,75 @@ #size-cells = <2>; #interrupt-cells = <1>; device_type = "pci"; - compatible = "marvell,mv64x60-pci"; - reg = <0cf8 8>; - ranges = <01000000 0 0 88000000 0 01000000 - 02000000 0 80000000 80000000 0 08000000>; - bus-range = <0 ff>; - clock-frequency = <3EF1480>; - interrupt-pci-iack = <0c34>; - interrupt-parent = <&/mv64x60/pic>; - interrupt-map-mask = <f800 0 0 7>; + compatible = "marvell,mv64360-pci"; + reg = <0xcf8 0x8>; + ranges = <0x01000000 0x0 0x0 + 0x88000000 0x0 0x01000000 + 0x02000000 0x0 0x80000000 + 0x80000000 0x0 0x08000000>; + bus-range = <0 255>; + clock-frequency = <66000000>; + interrupt-pci-iack = <0xc34>; + interrupt-parent = <&PIC>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0a */ - 5000 0 0 1 &/mv64x60/pic 50 - 5000 0 0 2 &/mv64x60/pic 51 - 5000 0 0 3 &/mv64x60/pic 5b - 5000 0 0 4 &/mv64x60/pic 5d + 0x5000 0 0 1 &PIC 80 + 0x5000 0 0 2 &PIC 81 + 0x5000 0 0 3 &PIC 91 + 0x5000 0 0 4 &PIC 93 /* IDSEL 0x0b */ - 5800 0 0 1 &/mv64x60/pic 5b - 5800 0 0 2 &/mv64x60/pic 5d - 5800 0 0 3 &/mv64x60/pic 50 - 5800 0 0 4 &/mv64x60/pic 51 + 0x5800 0 0 1 &PIC 91 + 0x5800 0 0 2 &PIC 93 + 0x5800 0 0 3 &PIC 80 + 0x5800 0 0 4 &PIC 81 /* IDSEL 0x0c */ - 6000 0 0 1 &/mv64x60/pic 5b - 6000 0 0 2 &/mv64x60/pic 5d - 6000 0 0 3 &/mv64x60/pic 50 - 6000 0 0 4 &/mv64x60/pic 51 + 0x6000 0 0 1 &PIC 91 + 0x6000 0 0 2 &PIC 93 + 0x6000 0 0 3 &PIC 80 + 0x6000 0 0 4 &PIC 81 /* IDSEL 0x0d */ - 6800 0 0 1 &/mv64x60/pic 5d - 6800 0 0 2 &/mv64x60/pic 50 - 6800 0 0 3 &/mv64x60/pic 51 - 6800 0 0 4 &/mv64x60/pic 5b + 0x6800 0 0 1 &PIC 93 + 0x6800 0 0 2 &PIC 80 + 0x6800 0 0 3 &PIC 81 + 0x6800 0 0 4 &PIC 91 >; }; cpu-error@0070 { - compatible = "marvell,mv64x60-cpu-error"; - reg = <0070 10 0128 28>; - interrupts = <03>; - interrupt-parent = <&/mv64x60/pic>; + compatible = "marvell,mv64360-cpu-error"; + reg = <0x70 0x10 0x128 0x28>; + interrupts = <3>; + interrupt-parent = <&PIC>; }; sram-ctrl@0380 { - compatible = "marvell,mv64x60-sram-ctrl"; - reg = <0380 80>; - interrupts = <0d>; - interrupt-parent = <&/mv64x60/pic>; + compatible = "marvell,mv64360-sram-ctrl"; + reg = <0x380 0x80>; + interrupts = <13>; + interrupt-parent = <&PIC>; }; pci-error@1d40 { - compatible = "marvell,mv64x60-pci-error"; - reg = <1d40 40 0c28 4>; - interrupts = <0c>; - interrupt-parent = <&/mv64x60/pic>; + compatible = "marvell,mv64360-pci-error"; + reg = <0x1d40 0x40 0xc28 0x4>; + interrupts = <12>; + interrupt-parent = <&PIC>; }; mem-ctrl@1400 { - compatible = "marvell,mv64x60-mem-ctrl"; - reg = <1400 60>; - interrupts = <11>; - interrupt-parent = <&/mv64x60/pic>; + compatible = "marvell,mv64360-mem-ctrl"; + reg = <0x1400 0x60>; + interrupts = <17>; + interrupt-parent = <&PIC>; }; }; chosen { bootargs = "ip=on"; - linux,stdout-path = "/mv64x60@f1000000/mpsc@8000"; + linux,stdout-path = &MPSC0; }; }; diff --git a/arch/powerpc/boot/dts/rainier.dts b/arch/powerpc/boot/dts/rainier.dts index f947c75a2e94..6a8fa7089ea2 100644 --- a/arch/powerpc/boot/dts/rainier.dts +++ b/arch/powerpc/boot/dts/rainier.dts @@ -254,7 +254,6 @@ }; EMAC0: ethernet@ef600e00 { - linux,network-index = <0>; device_type = "network"; compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4"; interrupt-parent = <&EMAC0>; @@ -270,7 +269,7 @@ mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; @@ -284,7 +283,6 @@ }; EMAC1: ethernet@ef600f00 { - linux,network-index = <1>; device_type = "network"; compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4"; interrupt-parent = <&EMAC1>; @@ -300,7 +298,7 @@ mal-tx-channel = <1>; mal-rx-channel = <1>; cell-index = <1>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/sbc8641d.dts new file mode 100644 index 000000000000..3eebeec157b3 --- /dev/null +++ b/arch/powerpc/boot/dts/sbc8641d.dts @@ -0,0 +1,352 @@ +/* + * SBC8641D Device Tree Source + * + * Copyright 2008 Wind River Systems Inc. + * + * Paul Gortmaker (see MAINTAINERS for contact information) + * + * Based largely on the mpc8641_hpcn.dts by Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "SBC8641D"; + compatible = "wind,sbc8641"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8641@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; // L1 + i-cache-size = <32768>; // L1 + timebase-frequency = <0>; // From uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + }; + PowerPC,8641@1 { + device_type = "cpu"; + reg = <1>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; // From uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; // 512M at 0x0 + }; + + localbus@f8005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8641-localbus", "simple-bus"; + reg = <0xf8005000 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + + ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash + 1 0 0xf0000000 0x00010000 // 64KB EEPROM + 2 0 0xf1000000 0x00100000 // EPLD (1MB) + 3 0 0xe0000000 0x04000000 // 64MB LB SDRAM (CS3) + 4 0 0xe4000000 0x04000000 // 64MB LB SDRAM (CS4) + 6 0 0xf4000000 0x00100000 // LCD display (1MB) + 7 0 0xe8000000 0x04000000>; // 64MB OneNAND + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x01000000>; + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "dtb"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@300000 { + label = "kernel"; + reg = <0x00100000 0x00400000>; + read-only; + }; + partition@400000 { + label = "fs"; + reg = <0x00500000 0x00a00000>; + }; + partition@700000 { + label = "firmware"; + reg = <0x00f00000 0x00100000>; + read-only; + }; + }; + + epld@2,0 { + compatible = "wrs,epld-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <2 0 0x100000>; + ranges = <0 0 5 0 1 // User switches + 1 0 5 1 1 // Board ID/Rev + 3 0 5 3 1>; // LEDs + }; + }; + + soc@f8000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x00000000 0xf8000000 0x00100000>; + reg = <0xf8000000 0x00001000>; // CCSRBAR + bus-frequency = <0>; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + + phy0: ethernet-phy@1f { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <0x1f>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <0>; + device_type = "ethernet-phy"; + }; + phy2: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <2>; + device_type = "ethernet-phy"; + }; + }; + + enet0: ethernet@24000 { + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@25000 { + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + enet2: ethernet@26000 { + cell-index = <2>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 32 2 33 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy2>; + phy-connection-type = "rgmii-id"; + }; + + enet3: ethernet@27000 { + cell-index = <3>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x27000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <37 2 38 2 39 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy3>; + phy-connection-type = "rgmii-id"; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <28 2>; + interrupt-parent = <&mpic>; + }; + + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + + global-utilities@e0000 { + compatible = "fsl,mpc8641-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + }; + + pci0: pcie@f8008000 { + cell-index = <0>; + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf8008000 0x1000>; + bus-range = <0x0 0xff>; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <24 2>; + interrupt-map-mask = <0xff00 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x0000 0 0 1 &mpic 0 1 + 0x0000 0 0 2 &mpic 1 1 + 0x0000 0 0 3 &mpic 2 1 + 0x0000 0 0 4 &mpic 3 1 + >; + + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0x80000000 + 0x02000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00100000>; + }; + + }; + + pci1: pcie@f8009000 { + cell-index = <1>; + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf8009000 0x1000>; + bus-range = <0 0xff>; + ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <25 2>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x0000 0 0 1 &mpic 4 1 + 0x0000 0 0 2 &mpic 5 1 + 0x0000 0 0 3 &mpic 6 1 + 0x0000 0 0 4 &mpic 7 1 + >; + + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0xa0000000 + 0x02000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00100000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts index 8db9515d7dc3..a1ae4d6ec990 100644 --- a/arch/powerpc/boot/dts/sequoia.dts +++ b/arch/powerpc/boot/dts/sequoia.dts @@ -269,7 +269,6 @@ }; EMAC0: ethernet@ef600e00 { - linux,network-index = <0>; device_type = "network"; compatible = "ibm,emac-440epx", "ibm,emac4"; interrupt-parent = <&EMAC0>; @@ -285,7 +284,7 @@ mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; @@ -299,7 +298,6 @@ }; EMAC1: ethernet@ef600f00 { - linux,network-index = <1>; device_type = "network"; compatible = "ibm,emac-440epx", "ibm,emac4"; interrupt-parent = <&EMAC1>; @@ -315,7 +313,7 @@ mal-tx-channel = <1>; mal-rx-channel = <1>; cell-index = <1>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; diff --git a/arch/powerpc/boot/dts/taishan.dts b/arch/powerpc/boot/dts/taishan.dts index 8278068c802c..e808e1c5593a 100644 --- a/arch/powerpc/boot/dts/taishan.dts +++ b/arch/powerpc/boot/dts/taishan.dts @@ -104,6 +104,16 @@ // FIXME: anything else? }; + L2C0: l2c { + compatible = "ibm,l2-cache-440gx", "ibm,l2-cache"; + dcr-reg = <20 8 /* Internal SRAM DCR's */ + 30 8>; /* L2 cache DCR's */ + cache-line-size = <20>; /* 32 bytes */ + cache-size = <40000>; /* L2, 256K */ + interrupt-parent = <&UIC2>; + interrupts = <17 1>; + }; + plb { compatible = "ibm,plb-440gx", "ibm,plb4"; #address-cells = <2>; @@ -232,10 +242,18 @@ reg = <40000790 8>; }; + TAH0: emac-tah@40000b50 { + compatible = "ibm,tah-440gx", "ibm,tah"; + reg = <40000b50 30>; + }; + + TAH1: emac-tah@40000d50 { + compatible = "ibm,tah-440gx", "ibm,tah"; + reg = <40000d50 30>; + }; EMAC0: ethernet@40000800 { unused = <1>; - linux,network-index = <2>; device_type = "network"; compatible = "ibm,emac-440gx", "ibm,emac4"; interrupt-parent = <&UIC1>; @@ -256,7 +274,6 @@ }; EMAC1: ethernet@40000900 { unused = <1>; - linux,network-index = <3>; device_type = "network"; compatible = "ibm,emac-440gx", "ibm,emac4"; interrupt-parent = <&UIC1>; @@ -277,7 +294,6 @@ }; EMAC2: ethernet@40000c00 { - linux,network-index = <0>; device_type = "network"; compatible = "ibm,emac-440gx", "ibm,emac4"; interrupt-parent = <&UIC2>; @@ -288,7 +304,7 @@ mal-tx-channel = <2>; mal-rx-channel = <2>; cell-index = <2>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; @@ -297,10 +313,11 @@ rgmii-channel = <0>; zmii-device = <&ZMII0>; zmii-channel = <2>; + tah-device = <&TAH0>; + tah-channel = <0>; }; EMAC3: ethernet@40000e00 { - linux,network-index = <1>; device_type = "network"; compatible = "ibm,emac-440gx", "ibm,emac4"; interrupt-parent = <&UIC2>; @@ -311,7 +328,7 @@ mal-tx-channel = <3>; mal-rx-channel = <3>; cell-index = <3>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; @@ -320,6 +337,8 @@ rgmii-channel = <1>; zmii-device = <&ZMII0>; zmii-channel = <3>; + tah-device = <&TAH1>; + tah-channel = <0>; }; diff --git a/arch/powerpc/boot/dts/walnut.dts b/arch/powerpc/boot/dts/walnut.dts index dcc21b0438e5..a328607c8f84 100644 --- a/arch/powerpc/boot/dts/walnut.dts +++ b/arch/powerpc/boot/dts/walnut.dts @@ -125,7 +125,6 @@ }; EMAC: ethernet@ef600800 { - linux,network-index = <0>; device_type = "network"; compatible = "ibm,emac-405gp", "ibm,emac"; interrupt-parent = <&UIC0>; diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts index dc1499d30f43..b04a52e22bf5 100644 --- a/arch/powerpc/boot/dts/warp.dts +++ b/arch/powerpc/boot/dts/warp.dts @@ -204,7 +204,6 @@ }; EMAC0: ethernet@ef600e00 { - linux,network-index = <0>; device_type = "network"; compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; interrupt-parent = <&UIC1>; diff --git a/arch/powerpc/boot/dts/yosemite.dts b/arch/powerpc/boot/dts/yosemite.dts new file mode 100644 index 000000000000..0d6d332814e0 --- /dev/null +++ b/arch/powerpc/boot/dts/yosemite.dts @@ -0,0 +1,304 @@ +/* + * Device Tree Source for AMCC Yosemite + * + * Copyright 2008 IBM Corp. + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,yosemite"; + compatible = "amcc,yosemite","amcc,bamboo"; + dcr-parent = <&/cpus/cpu@0>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + serial2 = &UART2; + serial3 = &UART3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440EP"; + reg = <0>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <20>; + d-cache-line-size = <20>; + i-cache-size = <8000>; + d-cache-size = <8000>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440ep","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440ep","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0d0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1e 4 1f 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-440ep"; + dcr-reg = <00e 002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-440ep"; + dcr-reg = <00c 002>; + }; + + plb { + compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: sdram { + compatible = "ibm,sdram-440ep", "ibm,sdram-405gp"; + dcr-reg = <010 2>; + }; + + DMA0: dma { + compatible = "ibm,dma-440ep", "ibm,dma-440gp"; + dcr-reg = <100 027>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal"; + dcr-reg = <180 62>; + num-tx-chans = <4>; + num-rx-chans = <2>; + interrupt-parent = <&MAL0>; + interrupts = <0 1 2 3 4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0 &UIC0 a 4 + /*RXEOB*/ 1 &UIC0 b 4 + /*SERR*/ 2 &UIC1 0 4 + /*TXDE*/ 3 &UIC1 1 4 + /*RXDE*/ 4 &UIC1 2 4>; + }; + + POB0: opb { + compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + /* Bamboo is oddball in the 44x world and doesn't use the ERPN + * bits. + */ + ranges = <00000000 0 00000000 80000000 + 80000000 0 80000000 80000000>; + interrupt-parent = <&UIC1>; + interrupts = <7 4>; + clock-frequency = <0>; /* Filled in by zImage */ + + EBC0: ebc { + compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by zImage */ + interrupts = <5 1>; + interrupt-parent = <&UIC1>; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600300 8>; + virtual-reg = <ef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <1c200>; + interrupt-parent = <&UIC0>; + interrupts = <0 4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600400 8>; + virtual-reg = <ef600400>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + UART2: serial@ef600500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600500 8>; + virtual-reg = <ef600500>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <3 4>; + status = "disabled"; + }; + + UART3: serial@ef600600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600600 8>; + virtual-reg = <ef600600>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <4 4>; + status = "disabled"; + }; + + IIC0: i2c@ef600700 { + compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; + reg = <ef600700 14>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + + IIC1: i2c@ef600800 { + compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; + reg = <ef600800 14>; + interrupt-parent = <&UIC0>; + interrupts = <7 4>; + }; + + spi@ef600900 { + compatible = "amcc,spi-440ep"; + reg = <ef600900 6>; + interrupts = <8 4>; + interrupt-parent = <&UIC0>; + }; + + ZMII0: emac-zmii@ef600d00 { + compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii"; + reg = <ef600d00 c>; + }; + + EMAC0: ethernet@ef600e00 { + device_type = "network"; + compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <1c 4 1d 4>; + reg = <ef600e00 70>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <0 1>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rmii"; + phy-map = <00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + }; + + EMAC1: ethernet@ef600f00 { + device_type = "network"; + compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <1e 4 1f 4>; + reg = <ef600f00 70>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <2 3>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rmii"; + phy-map = <00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <1>; + }; + + usb@ef601000 { + compatible = "ohci-be"; + reg = <ef601000 80>; + interrupts = <8 4 9 4>; + interrupt-parent = < &UIC1 >; + }; + }; + + PCI0: pci@ec000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb440ep-pci", "ibm,plb-pci"; + primary; + reg = <0 eec00000 8 /* Config space access */ + 0 eed00000 4 /* IACK */ + 0 eed00000 4 /* Special cycle */ + 0 ef400000 40>; /* Internal registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed. Chip supports a second + * IO range but we don't use it for now + */ + ranges = <02000000 0 a0000000 0 a0000000 0 20000000 + 01000000 0 00000000 0 e8000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* Bamboo has all 4 IRQ pins tied together per slot */ + interrupt-map-mask = <f800 0 0 0>; + interrupt-map = < + /* IDSEL 1 */ + 0800 0 0 0 &UIC0 1c 8 + + /* IDSEL 2 */ + 1000 0 0 0 &UIC0 1b 8 + + /* IDSEL 3 */ + 1800 0 0 0 &UIC0 1a 8 + + /* IDSEL 4 */ + 2000 0 0 0 &UIC0 19 8 + >; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600300"; + }; +}; diff --git a/arch/powerpc/boot/ebony.c b/arch/powerpc/boot/ebony.c index f61364c47a76..5532ab3221dd 100644 --- a/arch/powerpc/boot/ebony.c +++ b/arch/powerpc/boot/ebony.c @@ -75,7 +75,8 @@ static void ebony_fixups(void) ibm440gp_fixup_clocks(sysclk, 6 * 1843200); ibm4xx_sdram_fixup_memsize(); - dt_fixup_mac_addresses(ebony_mac0, ebony_mac1); + dt_fixup_mac_address_by_alias("ethernet0", ebony_mac0); + dt_fixup_mac_address_by_alias("ethernet1", ebony_mac1); ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); ebony_flashsel_fixup(); } diff --git a/arch/powerpc/boot/libfdt-wrapper.c b/arch/powerpc/boot/libfdt-wrapper.c index 59016bef1391..c541fd8a95d4 100644 --- a/arch/powerpc/boot/libfdt-wrapper.c +++ b/arch/powerpc/boot/libfdt-wrapper.c @@ -35,7 +35,7 @@ #define check_err(err) \ ({ \ if (BAD_ERROR(err) || ((err < 0) && DEBUG)) \ - printf("%s():%d %s\n\r", __FUNCTION__, __LINE__, \ + printf("%s():%d %s\n\r", __func__, __LINE__, \ fdt_strerror(err)); \ if (BAD_ERROR(err)) \ exit(); \ diff --git a/arch/powerpc/boot/mpc52xx-psc.c b/arch/powerpc/boot/mpc52xx-psc.c index 1074626e6a37..d4cb4e4e0938 100644 --- a/arch/powerpc/boot/mpc52xx-psc.c +++ b/arch/powerpc/boot/mpc52xx-psc.c @@ -51,14 +51,9 @@ static unsigned char psc_getc(void) int mpc5200_psc_console_init(void *devp, struct serial_console_data *scdp) { - int n; - /* Get the base address of the psc registers */ - n = getprop(devp, "virtual-reg", &psc, sizeof(psc)); - if (n != sizeof(psc)) { - if (!dt_xlate_reg(devp, 0, (void *)&psc, NULL)) - return -1; - } + if (dt_get_virtual_reg(devp, &psc, 1) < 1) + return -1; scdp->open = psc_open; scdp->putc = psc_putc; diff --git a/arch/powerpc/boot/mpsc.c b/arch/powerpc/boot/mpsc.c index 802ea53790d8..425ad88cce8d 100644 --- a/arch/powerpc/boot/mpsc.c +++ b/arch/powerpc/boot/mpsc.c @@ -141,7 +141,7 @@ int mpsc_console_init(void *devp, struct serial_console_data *scdp) if (mpscintr_base == NULL) goto err_out; - n = getprop(devp, "block-index", &v, sizeof(v)); + n = getprop(devp, "cell-index", &v, sizeof(v)); if (n != sizeof(v)) goto err_out; reg_set = (int)v; diff --git a/arch/powerpc/boot/mv64x60.c b/arch/powerpc/boot/mv64x60.c index b43259455d4b..d9bb302b91d2 100644 --- a/arch/powerpc/boot/mv64x60.c +++ b/arch/powerpc/boot/mv64x60.c @@ -535,7 +535,7 @@ u8 *mv64x60_get_bridge_pbase(void) u32 v[2]; void *devp; - devp = finddevice("/mv64x60"); + devp = find_node_by_compatible(NULL, "marvell,mv64360"); if (devp == NULL) goto err_out; if (getprop(devp, "reg", v, sizeof(v)) != sizeof(v)) @@ -553,7 +553,7 @@ u8 *mv64x60_get_bridge_base(void) u32 v; void *devp; - devp = finddevice("/mv64x60"); + devp = find_node_by_compatible(NULL, "marvell,mv64360"); if (devp == NULL) goto err_out; if (getprop(devp, "virtual-reg", &v, sizeof(v)) != sizeof(v)) diff --git a/arch/powerpc/boot/mv64x60_i2c.c b/arch/powerpc/boot/mv64x60_i2c.c index d085377be3bc..52a3212b6638 100644 --- a/arch/powerpc/boot/mv64x60_i2c.c +++ b/arch/powerpc/boot/mv64x60_i2c.c @@ -185,7 +185,7 @@ int mv64x60_i2c_open(void) u32 v; void *devp; - devp = finddevice("/mv64x60/i2c"); + devp = find_node_by_compatible(NULL, "marvell,mv64360-i2c"); if (devp == NULL) goto err_out; if (getprop(devp, "virtual-reg", &v, sizeof(v)) != sizeof(v)) diff --git a/arch/powerpc/boot/ns16550.c b/arch/powerpc/boot/ns16550.c index f8f1b2f31412..aef3bdc89160 100644 --- a/arch/powerpc/boot/ns16550.c +++ b/arch/powerpc/boot/ns16550.c @@ -55,15 +55,9 @@ static u8 ns16550_tstc(void) int ns16550_console_init(void *devp, struct serial_console_data *scdp) { int n; - unsigned long reg_phys; - n = getprop(devp, "virtual-reg", ®_base, sizeof(reg_base)); - if (n != sizeof(reg_base)) { - if (!dt_xlate_reg(devp, 0, ®_phys, NULL)) - return -1; - - reg_base = (void *)reg_phys; - } + if (dt_get_virtual_reg(devp, (void **)®_base, 1) < 1) + return -1; n = getprop(devp, "reg-shift", ®_shift, sizeof(reg_shift)); if (n != sizeof(reg_shift)) diff --git a/arch/powerpc/boot/ops.h b/arch/powerpc/boot/ops.h index 4b0544b03c64..321e2f5afe71 100644 --- a/arch/powerpc/boot/ops.h +++ b/arch/powerpc/boot/ops.h @@ -95,6 +95,7 @@ int dt_xlate_reg(void *node, int res, unsigned long *addr, unsigned long *size); int dt_xlate_addr(void *node, u32 *buf, int buflen, unsigned long *xlated_addr); int dt_is_compatible(void *node, const char *compat); void dt_get_reg_format(void *node, u32 *naddr, u32 *nsize); +int dt_get_virtual_reg(void *node, void **addr, int nres); static inline void *finddevice(const char *name) { diff --git a/arch/powerpc/boot/prpmc2800.c b/arch/powerpc/boot/prpmc2800.c index 05c3245b30d7..da31d6030482 100644 --- a/arch/powerpc/boot/prpmc2800.c +++ b/arch/powerpc/boot/prpmc2800.c @@ -344,20 +344,20 @@ static void prpmc2800_bridge_setup(u32 mem_size) acc_bits); /* Get the cpu -> pci i/o & mem mappings from the device tree */ - devp = finddevice("/mv64x60/pci@80000000"); + devp = find_node_by_compatible(NULL, "marvell,mv64360-pci"); if (devp == NULL) - fatal("Error: Missing /mv64x60/pci@80000000" + fatal("Error: Missing marvell,mv64360-pci" " device tree node\n\r"); rc = getprop(devp, "ranges", v, sizeof(v)); if (rc != sizeof(v)) - fatal("Error: Can't find /mv64x60/pci@80000000/ranges" + fatal("Error: Can't find marvell,mv64360-pci ranges" " property\n\r"); /* Get the cpu -> pci i/o & mem mappings from the device tree */ - devp = finddevice("/mv64x60"); + devp = find_node_by_compatible(NULL, "marvell,mv64360"); if (devp == NULL) - fatal("Error: Missing /mv64x60 device tree node\n\r"); + fatal("Error: Missing marvell,mv64360 device tree node\n\r"); enables = in_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE)); enables |= 0x0007fe00; /* Disable all cpu->pci windows */ @@ -429,9 +429,9 @@ static void prpmc2800_fixups(void) setprop(devp, "model", model, l); /* Set /cpus/PowerPC,7447/clock-frequency */ - devp = finddevice("/cpus/PowerPC,7447"); + devp = find_node_by_prop_value_str(NULL, "device_type", "cpu"); if (devp == NULL) - fatal("Error: Missing proper /cpus device tree node\n\r"); + fatal("Error: Missing proper cpu device tree node\n\r"); v[0] = bip->core_speed; setprop(devp, "clock-frequency", &v[0], sizeof(v[0])); @@ -443,16 +443,17 @@ static void prpmc2800_fixups(void) v[1] = bip->mem_size; setprop(devp, "reg", v, sizeof(v)); - /* Update /mv64x60/model, if this is a mv64362 */ + /* Update model, if this is a mv64362 */ if (bip->bridge_type == BRIDGE_TYPE_MV64362) { - devp = finddevice("/mv64x60"); + devp = find_node_by_compatible(NULL, "marvell,mv64360"); if (devp == NULL) - fatal("Error: Missing /mv64x60 device tree node\n\r"); + fatal("Error: Missing marvell,mv64360" + " device tree node\n\r"); setprop(devp, "model", "mv64362", strlen("mv64362") + 1); } /* Set User FLASH size */ - devp = finddevice("/mv64x60/flash@a0000000"); + devp = find_node_by_compatible(NULL, "direct-mapped"); if (devp == NULL) fatal("Error: Missing User FLASH device tree node\n\r"); rc = getprop(devp, "reg", v, sizeof(v)); diff --git a/arch/powerpc/boot/ps3-head.S b/arch/powerpc/boot/ps3-head.S index a55c2735f759..b6fcbaf5027b 100644 --- a/arch/powerpc/boot/ps3-head.S +++ b/arch/powerpc/boot/ps3-head.S @@ -27,8 +27,9 @@ /* * __system_reset_overlay - The PS3 first stage entry. * - * The bootwraper build script copies the 0x100 bytes at symbol - * __system_reset_overlay to offset 0x100 of the rom image. + * The bootwraper build script copies the 512 bytes at symbol + * __system_reset_overlay to offset 0x100 of the rom image. This symbol + * must occupy 512 or less bytes. * * The PS3 has a single processor with two threads. */ @@ -47,8 +48,6 @@ __system_reset_overlay: mfspr r3, 0x88 cntlzw. r3, r3 - li r4, 0 - li r5, 0 beq 1f /* Secondary goes to __secondary_hold in kernel. */ @@ -57,8 +56,14 @@ __system_reset_overlay: mtctr r4 bctr - /* Primary delays then goes to _zimage_start in wrapper. */ 1: + /* Save the value at addr zero for a null pointer write check later. */ + + li r4, 0 + lwz r3, 0(r4) + + /* Primary delays then goes to _zimage_start in wrapper. */ + or 31, 31, 31 /* db16cyc */ or 31, 31, 31 /* db16cyc */ @@ -67,16 +72,18 @@ __system_reset_overlay: mtctr r4 bctr + . = __system_reset_overlay + 512 + /* * __system_reset_kernel - Place holder for the kernel reset vector. * - * The bootwrapper build script copies 0x100 bytes from offset 0x100 + * The bootwrapper build script copies 512 bytes from offset 0x100 * of the rom image to the symbol __system_reset_kernel. At runtime - * the bootwrapper program copies the 0x100 bytes at __system_reset_kernel - * to ram address 0x100. This symbol must occupy 0x100 bytes. + * the bootwrapper program copies the 512 bytes at __system_reset_kernel + * to ram address 0x100. This symbol must occupy 512 bytes. */ .globl __system_reset_kernel __system_reset_kernel: - . = __system_reset_kernel + 0x100 + . = __system_reset_kernel + 512 diff --git a/arch/powerpc/boot/ps3.c b/arch/powerpc/boot/ps3.c index 3b0ac4d006ec..9954d98871d0 100644 --- a/arch/powerpc/boot/ps3.c +++ b/arch/powerpc/boot/ps3.c @@ -27,10 +27,10 @@ #include "page.h" #include "ops.h" -extern s64 lv1_panic(u64 in_1); -extern s64 lv1_get_logical_partition_id(u64 *out_1); -extern s64 lv1_get_logical_ppe_id(u64 *out_1); -extern s64 lv1_get_repository_node_value(u64 in_1, u64 in_2, u64 in_3, +extern int lv1_panic(u64 in_1); +extern int lv1_get_logical_partition_id(u64 *out_1); +extern int lv1_get_logical_ppe_id(u64 *out_1); +extern int lv1_get_repository_node_value(u64 in_1, u64 in_2, u64 in_3, u64 in_4, u64 in_5, u64 *out_1, u64 *out_2); #ifdef DEBUG @@ -46,6 +46,7 @@ BSS_STACK(4096); * edit the command line passed to vmlinux (by setting /chosen/bootargs). * The buffer is put in it's own section so that tools may locate it easier. */ + static char cmdline[COMMAND_LINE_SIZE] __attribute__((__section__("__builtin_cmdline"))); @@ -75,7 +76,7 @@ static void ps3_exit(void) static int ps3_repository_read_rm_size(u64 *rm_size) { - s64 result; + int result; u64 lpar_id; u64 ppe_id; u64 v2; @@ -114,16 +115,17 @@ void ps3_copy_vectors(void) { extern char __system_reset_kernel[]; - memcpy((void *)0x100, __system_reset_kernel, 0x100); - flush_cache((void *)0x100, 0x100); + memcpy((void *)0x100, __system_reset_kernel, 512); + flush_cache((void *)0x100, 512); } -void platform_init(void) +void platform_init(unsigned long null_check) { const u32 heapsize = 0x1000000 - (u32)_end; /* 16MiB */ void *chosen; unsigned long ft_addr; u64 rm_size; + unsigned long val; console_ops.write = ps3_console_write; platform_ops.exit = ps3_exit; @@ -151,6 +153,11 @@ void platform_init(void) printf(" flat tree at 0x%lx\n\r", ft_addr); + val = *(unsigned long *)0; + + if (val != null_check) + printf("null check failed: %lx != %lx\n\r", val, null_check); + ((kernel_entry_t)0)(ft_addr, 0, NULL); ps3_exit(); diff --git a/arch/powerpc/boot/serial.c b/arch/powerpc/boot/serial.c index 9960421eb6b9..8b3607cb53fb 100644 --- a/arch/powerpc/boot/serial.c +++ b/arch/powerpc/boot/serial.c @@ -119,7 +119,7 @@ int serial_console_init(void) if (dt_is_compatible(devp, "ns16550")) rc = ns16550_console_init(devp, &serial_cd); - else if (dt_is_compatible(devp, "marvell,mpsc")) + else if (dt_is_compatible(devp, "marvell,mv64360-mpsc")) rc = mpsc_console_init(devp, &serial_cd); else if (dt_is_compatible(devp, "fsl,cpm1-scc-uart") || dt_is_compatible(devp, "fsl,cpm1-smc-uart") || diff --git a/arch/powerpc/boot/simpleboot.c b/arch/powerpc/boot/simpleboot.c new file mode 100644 index 000000000000..86cd285bccc6 --- /dev/null +++ b/arch/powerpc/boot/simpleboot.c @@ -0,0 +1,84 @@ +/* + * The simple platform -- for booting when firmware doesn't supply a device + * tree or any platform configuration information. + * All data is extracted from an embedded device tree + * blob. + * + * Authors: Scott Wood <scottwood@freescale.com> + * Grant Likely <grant.likely@secretlab.ca> + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * Copyright (c) 2008 Secret Lab Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "types.h" +#include "io.h" +#include "stdio.h" +#include "libfdt/libfdt.h" + +BSS_STACK(4*1024); + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + const u32 *na, *ns, *reg, *timebase; + u64 memsize64; + int node, size, i; + + /* Make sure FDT blob is sane */ + if (fdt_check_header(_dtb_start) != 0) + fatal("Invalid device tree blob\n"); + + /* Find the #address-cells and #size-cells properties */ + node = fdt_path_offset(_dtb_start, "/"); + if (node < 0) + fatal("Cannot find root node\n"); + na = fdt_getprop(_dtb_start, node, "#address-cells", &size); + if (!na || (size != 4)) + fatal("Cannot find #address-cells property"); + ns = fdt_getprop(_dtb_start, node, "#size-cells", &size); + if (!ns || (size != 4)) + fatal("Cannot find #size-cells property"); + + /* Find the memory range */ + node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type", + "memory", sizeof("memory")); + if (node < 0) + fatal("Cannot find memory node\n"); + reg = fdt_getprop(_dtb_start, node, "reg", &size); + if (size < (*na+*ns) * sizeof(u32)) + fatal("cannot get memory range\n"); + + /* Only interested in memory based at 0 */ + for (i = 0; i < *na; i++) + if (*reg++ != 0) + fatal("Memory range is not based at address 0\n"); + + /* get the memsize and trucate it to under 4G on 32 bit machines */ + memsize64 = 0; + for (i = 0; i < *ns; i++) + memsize64 = (memsize64 << 32) | *reg++; + if (sizeof(void *) == 4 && memsize64 >= 0x100000000ULL) + memsize64 = 0xffffffff; + + /* finally, setup the timebase */ + node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type", + "cpu", sizeof("cpu")); + if (!node) + fatal("Cannot find cpu node\n"); + timebase = fdt_getprop(_dtb_start, node, "timebase-frequency", &size); + if (timebase && (size == 4)) + timebase_period_ns = 1000000000 / *timebase; + + /* Now we have the memory size; initialize the heap */ + simple_alloc_init(_end, memsize64 - (unsigned long)_end, 32, 64); + + /* prepare the device tree and find the console */ + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/treeboot-walnut.c b/arch/powerpc/boot/treeboot-walnut.c index 472e36605a52..097974e59fac 100644 --- a/arch/powerpc/boot/treeboot-walnut.c +++ b/arch/powerpc/boot/treeboot-walnut.c @@ -68,7 +68,7 @@ static void walnut_fixups(void) ibm4xx_quiesce_eth((u32 *)0xef600800, NULL); ibm4xx_fixup_ebc_ranges("/plb/ebc"); walnut_flashsel_fixup(); - dt_fixup_mac_addresses((u8 *) WALNUT_OPENBIOS_MAC_OFF); + dt_fixup_mac_address_by_alias("ethernet0", (u8 *) WALNUT_OPENBIOS_MAC_OFF); } void platform_init(void) diff --git a/arch/powerpc/boot/virtex405-head.S b/arch/powerpc/boot/virtex405-head.S new file mode 100644 index 000000000000..3edb13f94669 --- /dev/null +++ b/arch/powerpc/boot/virtex405-head.S @@ -0,0 +1,30 @@ +#include "ppc_asm.h" + + .text + .global _zimage_start +_zimage_start: + + /* PPC errata 213: needed by Virtex-4 FX */ + mfccr0 0 + oris 0,0,0x50000000@h + mtccr0 0 + + /* + * Invalidate the data cache if the data cache is turned off. + * - The 405 core does not invalidate the data cache on power-up + * or reset but does turn off the data cache. We cannot assume + * that the cache contents are valid. + * - If the data cache is turned on this must have been done by + * a bootloader and we assume that the cache contents are + * valid. + */ + mfdccr r9 + cmplwi r9,0 + bne 2f + lis r9,0 + li r8,256 + mtctr r8 +1: dccci r0,r9 + addi r9,r9,0x20 + bdnz 1b +2: b _zimage_start_lib diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index 8f8b8494d62f..d6c96d9ab291 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -174,7 +174,7 @@ cuboot*) *-mpc83*) platformo=$object/cuboot-83xx.o ;; - *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555) + *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555|*-ksi8560*) platformo=$object/cuboot-85xx-cpm2.o ;; *-mpc85*|*-tqm8540|*-sbc85*) @@ -199,6 +199,10 @@ adder875-redboot) platformo="$object/fixed-head.o $object/redboot-8xx.o" binary=y ;; +simpleboot-virtex405-*) + platformo="$object/virtex405-head.o $object/simpleboot.o" + binary=y + ;; esac vmz="$tmpdir/`basename \"$kernel\"`.$ext" @@ -226,10 +230,13 @@ if [ -n "$version" ]; then uboot_version="-n Linux-$version" fi +# physical offset of kernel image +membase=`${CROSS}objdump -p "$kernel" | grep -m 1 LOAD | awk '{print $7}'` + case "$platform" in uboot) rm -f "$ofile" - mkimage -A ppc -O linux -T kernel -C gzip -a 00000000 -e 00000000 \ + mkimage -A ppc -O linux -T kernel -C gzip -a $membase -e $membase \ $uboot_version -d "$vmz" "$ofile" if [ -z "$cacheit" ]; then rm -f "$vmz" @@ -298,15 +305,16 @@ treeboot*) exit 0 ;; ps3) - # The ps3's loader supports loading gzipped binary images from flash - # rom to addr zero. The loader enters the image at addr 0x100. A - # bootwrapper overlay is use to arrange for the kernel to be loaded - # to addr zero and to have a suitable bootwrapper entry at 0x100. - # To construct the rom image, 0x100 bytes from offset 0x100 in the - # kernel is copied to the bootwrapper symbol __system_reset_kernel. - # The 0x100 bytes at the bootwrapper symbol __system_reset_overlay is - # then copied to offset 0x100. At runtime the bootwrapper program - # copies the 0x100 bytes at __system_reset_kernel to addr 0x100. + # The ps3's loader supports loading a gzipped binary image from flash + # rom to ram addr zero. The loader then enters the system reset + # vector at addr 0x100. A bootwrapper overlay is used to arrange for + # a binary image of the kernel to be at addr zero, and yet have a + # suitable bootwrapper entry at 0x100. To construct the final rom + # image 512 bytes from offset 0x100 is copied to the bootwrapper + # place holder at symbol __system_reset_kernel. The 512 bytes of the + # bootwrapper entry code at symbol __system_reset_overlay is then + # copied to offset 0x100. At runtime the bootwrapper program copies + # the data at __system_reset_kernel back to addr 0x100. system_reset_overlay=0x`${CROSS}nm "$ofile" \ | grep ' __system_reset_overlay$' \ @@ -317,7 +325,7 @@ ps3) | cut -d' ' -f1` system_reset_kernel=`printf "%d" $system_reset_kernel` overlay_dest="256" - overlay_size="256" + overlay_size="512" ${CROSS}objcopy -O binary "$ofile" "$ofile.bin" |