summaryrefslogtreecommitdiff
path: root/arch/powerpc/kernel/pci-common.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/kernel/pci-common.c')
-rw-r--r--arch/powerpc/kernel/pci-common.c42
1 files changed, 20 insertions, 22 deletions
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 6053f037ef0a..f46914a0f33e 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -657,15 +657,6 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar,
* ranges. However, some machines (thanks Apple !) tend to split their
* space into lots of small contiguous ranges. So we have to coalesce.
*
- * - We can only cope with all memory ranges having the same offset
- * between CPU addresses and PCI addresses. Unfortunately, some bridges
- * are setup for a large 1:1 mapping along with a small "window" which
- * maps PCI address 0 to some arbitrary high address of the CPU space in
- * order to give access to the ISA memory hole.
- * The way out of here that I've chosen for now is to always set the
- * offset based on the first resource found, then override it if we
- * have a different offset and the previous was set by an ISA hole.
- *
* - Some busses have IO space not starting at 0, which causes trouble with
* the way we do our IO resource renumbering. The code somewhat deals with
* it for 64 bits but I would expect problems on 32 bits.
@@ -680,10 +671,9 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose,
int rlen;
int pna = of_n_addr_cells(dev);
int np = pna + 5;
- int memno = 0, isa_hole = -1;
+ int memno = 0;
u32 pci_space;
unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size;
- unsigned long long isa_mb = 0;
struct resource *res;
printk(KERN_INFO "PCI host bridge %s %s ranges:\n",
@@ -777,8 +767,6 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose,
}
/* Handles ISA memory hole space here */
if (pci_addr == 0) {
- isa_mb = cpu_addr;
- isa_hole = memno;
if (primary || isa_mem_base == 0)
isa_mem_base = cpu_addr;
hose->isa_mem_phys = cpu_addr;
@@ -839,6 +827,7 @@ static void pcibios_fixup_resources(struct pci_dev *dev)
}
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
struct resource *res = dev->resource + i;
+ struct pci_bus_region reg;
if (!res->flags)
continue;
@@ -847,8 +836,9 @@ static void pcibios_fixup_resources(struct pci_dev *dev)
* at 0 as unset as well, except if PCI_PROBE_ONLY is also set
* since in that case, we don't want to re-assign anything
*/
+ pcibios_resource_to_bus(dev, &reg, res);
if (pci_has_flag(PCI_REASSIGN_ALL_RSRC) ||
- (res->start == 0 && !pci_has_flag(PCI_PROBE_ONLY))) {
+ (reg.start == 0 && !pci_has_flag(PCI_PROBE_ONLY))) {
/* Only print message if not re-assigning */
if (!pci_has_flag(PCI_REASSIGN_ALL_RSRC))
pr_debug("PCI:%s Resource %d %016llx-%016llx [%x] "
@@ -1004,7 +994,7 @@ void pcibios_setup_bus_self(struct pci_bus *bus)
ppc_md.pci_dma_bus_setup(bus);
}
-void pcibios_setup_device(struct pci_dev *dev)
+static void pcibios_setup_device(struct pci_dev *dev)
{
/* Fixup NUMA node as it may not be setup yet by the generic
* code and is needed by the DMA init
@@ -1025,6 +1015,17 @@ void pcibios_setup_device(struct pci_dev *dev)
ppc_md.pci_irq_fixup(dev);
}
+int pcibios_add_device(struct pci_dev *dev)
+{
+ /*
+ * We can only call pcibios_setup_device() after bus setup is complete,
+ * since some of the platform specific DMA setup code depends on it.
+ */
+ if (dev->bus->is_added)
+ pcibios_setup_device(dev);
+ return 0;
+}
+
void pcibios_setup_bus_devices(struct pci_bus *bus)
{
struct pci_dev *dev;
@@ -1479,10 +1480,6 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
if (ppc_md.pcibios_enable_device_hook(dev))
return -EINVAL;
- /* avoid pcie irq fix up impact on cardbus */
- if (dev->hdr_type != PCI_HEADER_TYPE_CARDBUS)
- pcibios_setup_device(dev);
-
return pci_enable_resources(dev, mask);
}
@@ -1520,9 +1517,10 @@ static void pcibios_setup_phb_resources(struct pci_controller *hose,
for (i = 0; i < 3; ++i) {
res = &hose->mem_resources[i];
if (!res->flags) {
- printk(KERN_ERR "PCI: Memory resource 0 not set for "
- "host bridge %s (domain %d)\n",
- hose->dn->full_name, hose->global_number);
+ if (i == 0)
+ printk(KERN_ERR "PCI: Memory resource 0 not set for "
+ "host bridge %s (domain %d)\n",
+ hose->dn->full_name, hose->global_number);
continue;
}
offset = hose->mem_offset[i];