diff options
Diffstat (limited to 'arch/powerpc/kernel/setup_64.c')
| -rw-r--r-- | arch/powerpc/kernel/setup_64.c | 287 |
1 files changed, 61 insertions, 226 deletions
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 96d4a2b23d0f..d8216aed22b7 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -35,7 +35,6 @@ #include <linux/pci.h> #include <linux/lockdep.h> #include <linux/memblock.h> -#include <linux/hugetlb.h> #include <linux/memory.h> #include <linux/nmi.h> @@ -64,12 +63,10 @@ #include <asm/xmon.h> #include <asm/udbg.h> #include <asm/kexec.h> -#include <asm/mmu_context.h> #include <asm/code-patching.h> -#include <asm/kvm_ppc.h> -#include <asm/hugetlb.h> -#include <asm/epapr_hcalls.h> #include <asm/livepatch.h> +#include <asm/opal.h> +#include <asm/cputhreads.h> #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -100,7 +97,7 @@ int icache_bsize; int ucache_bsize; #if defined(CONFIG_PPC_BOOK3E) && defined(CONFIG_SMP) -static void setup_tlb_core_data(void) +void __init setup_tlb_core_data(void) { int cpu; @@ -133,10 +130,6 @@ static void setup_tlb_core_data(void) } } } -#else -static void setup_tlb_core_data(void) -{ -} #endif #ifdef CONFIG_SMP @@ -144,7 +137,7 @@ static void setup_tlb_core_data(void) static char *smt_enabled_cmdline; /* Look for ibm,smt-enabled OF option */ -static void check_smt_enabled(void) +void __init check_smt_enabled(void) { struct device_node *dn; const char *smt_option; @@ -193,12 +186,10 @@ static int __init early_smt_enabled(char *p) } early_param("smt-enabled", early_smt_enabled); -#else -#define check_smt_enabled() #endif /* CONFIG_SMP */ /** Fix up paca fields required for the boot cpu */ -static void fixup_boot_paca(void) +static void __init fixup_boot_paca(void) { /* The boot cpu is started */ get_paca()->cpu_start = 1; @@ -206,23 +197,50 @@ static void fixup_boot_paca(void) get_paca()->data_offset = 0; } -static void cpu_ready_for_interrupts(void) +static void __init configure_exceptions(void) { - /* Set IR and DR in PACA MSR */ - get_paca()->kernel_msr = MSR_KERNEL; - /* - * Enable AIL if supported, and we are in hypervisor mode. If we are - * not in hypervisor mode, we enable relocation-on interrupts later - * in pSeries_setup_arch() using the H_SET_MODE hcall. + * Setup the trampolines from the lowmem exception vectors + * to the kdump kernel when not using a relocatable kernel. */ - if (cpu_has_feature(CPU_FTR_HVMODE) && - cpu_has_feature(CPU_FTR_ARCH_207S)) { - unsigned long lpcr = mfspr(SPRN_LPCR); - mtspr(SPRN_LPCR, lpcr | LPCR_AIL_3); + setup_kdump_trampoline(); + + /* Under a PAPR hypervisor, we need hypercalls */ + if (firmware_has_feature(FW_FEATURE_SET_MODE)) { + /* Enable AIL if possible */ + pseries_enable_reloc_on_exc(); + + /* + * Tell the hypervisor that we want our exceptions to + * be taken in little endian mode. + * + * We don't call this for big endian as our calling convention + * makes us always enter in BE, and the call may fail under + * some circumstances with kdump. + */ +#ifdef __LITTLE_ENDIAN__ + pseries_little_endian_exceptions(); +#endif + } else { + /* Set endian mode using OPAL */ + if (firmware_has_feature(FW_FEATURE_OPAL)) + opal_configure_cores(); + + /* Enable AIL if supported, and we are in hypervisor mode */ + if (cpu_has_feature(CPU_FTR_HVMODE) && + cpu_has_feature(CPU_FTR_ARCH_207S)) { + unsigned long lpcr = mfspr(SPRN_LPCR); + mtspr(SPRN_LPCR, lpcr | LPCR_AIL_3); + } } } +static void cpu_ready_for_interrupts(void) +{ + /* Set IR and DR in PACA MSR */ + get_paca()->kernel_msr = MSR_KERNEL; +} + /* * Early initialization entry point. This is called by head.S * with MMU translation disabled. We rely on the "feature" of @@ -270,22 +288,22 @@ void __init early_setup(unsigned long dt_ptr) */ early_init_devtree(__va(dt_ptr)); - epapr_paravirt_early_init(); - /* Now we know the logical id of our boot cpu, setup the paca. */ setup_paca(&paca[boot_cpuid]); fixup_boot_paca(); - /* Probe the machine type */ - probe_machine(); - - setup_kdump_trampoline(); - - DBG("Found, Initializing memory management...\n"); + /* + * Configure exception handlers. This include setting up trampolines + * if needed, setting exception endian mode, etc... + */ + configure_exceptions(); /* Initialize the hash table or TLB handling */ early_init_mmu(); + /* Apply all the dynamic patching */ + apply_feature_fixups(); + /* * At this point, we can let interrupts switch to virtual mode * (the MMU has been setup), so adjust the MSR in the PACA to @@ -293,16 +311,6 @@ void __init early_setup(unsigned long dt_ptr) */ cpu_ready_for_interrupts(); - /* Reserve large chunks of memory for use by CMA for KVM */ - kvm_cma_reserve(); - - /* - * Reserve any gigantic pages requested on the command line. - * memblock needs to have been initialized by the time this is - * called since this will reserve memory. - */ - reserve_hugetlb_gpages(); - DBG(" <- early_setup()\n"); #ifdef CONFIG_PPC_EARLY_DEBUG_BOOTX @@ -321,7 +329,7 @@ void __init early_setup(unsigned long dt_ptr) #ifdef CONFIG_SMP void early_setup_secondary(void) { - /* Mark interrupts enabled in PACA */ + /* Mark interrupts disabled in PACA */ get_paca()->soft_enabled = 0; /* Initialize the hash table or TLB handling */ @@ -391,7 +399,7 @@ void smp_release_cpus(void) * cache informations about the CPU that will be used by cache flush * routines and/or provided to userland */ -static void __init initialize_cache_info(void) +void __init initialize_cache_info(void) { struct device_node *np; unsigned long num_cpus = 0; @@ -456,127 +464,11 @@ static void __init initialize_cache_info(void) } } - DBG(" <- initialize_cache_info()\n"); -} - - -/* - * Do some initial setup of the system. The parameters are those which - * were passed in from the bootloader. - */ -void __init setup_system(void) -{ - DBG(" -> setup_system()\n"); - - /* Apply the CPUs-specific and firmware specific fixups to kernel - * text (nop out sections not relevant to this CPU or this firmware) - */ - do_feature_fixups(cur_cpu_spec->cpu_features, - &__start___ftr_fixup, &__stop___ftr_fixup); - do_feature_fixups(cur_cpu_spec->mmu_features, - &__start___mmu_ftr_fixup, &__stop___mmu_ftr_fixup); - do_feature_fixups(powerpc_firmware_features, - &__start___fw_ftr_fixup, &__stop___fw_ftr_fixup); - do_lwsync_fixups(cur_cpu_spec->cpu_features, - &__start___lwsync_fixup, &__stop___lwsync_fixup); - do_final_fixups(); - - /* - * Unflatten the device-tree passed by prom_init or kexec - */ - unflatten_device_tree(); - - /* - * Fill the ppc64_caches & systemcfg structures with informations - * retrieved from the device-tree. - */ - initialize_cache_info(); - -#ifdef CONFIG_PPC_RTAS - /* - * Initialize RTAS if available - */ - rtas_initialize(); -#endif /* CONFIG_PPC_RTAS */ - - /* - * Check if we have an initrd provided via the device-tree - */ - check_for_initrd(); - - /* - * Do some platform specific early initializations, that includes - * setting up the hash table pointers. It also sets up some interrupt-mapping - * related options that will be used by finish_device_tree() - */ - if (ppc_md.init_early) - ppc_md.init_early(); - - /* - * We can discover serial ports now since the above did setup the - * hash table management for us, thus ioremap works. We do that early - * so that further code can be debugged - */ - find_legacy_serial_ports(); - - /* - * Register early console - */ - register_early_udbg_console(); - - /* - * Initialize xmon - */ - xmon_setup(); - - smp_setup_cpu_maps(); - check_smt_enabled(); - setup_tlb_core_data(); - - /* - * Freescale Book3e parts spin in a loop provided by firmware, - * so smp_release_cpus() does nothing for them - */ -#if defined(CONFIG_SMP) - /* Release secondary cpus out of their spinloops at 0x60 now that - * we can map physical -> logical CPU ids - */ - smp_release_cpus(); -#endif - - pr_info("Starting Linux %s %s\n", init_utsname()->machine, - init_utsname()->version); - - pr_info("-----------------------------------------------------\n"); - pr_info("ppc64_pft_size = 0x%llx\n", ppc64_pft_size); - pr_info("phys_mem_size = 0x%llx\n", memblock_phys_mem_size()); - - if (ppc64_caches.dline_size != 0x80) - pr_info("dcache_line_size = 0x%x\n", ppc64_caches.dline_size); - if (ppc64_caches.iline_size != 0x80) - pr_info("icache_line_size = 0x%x\n", ppc64_caches.iline_size); - - pr_info("cpu_features = 0x%016lx\n", cur_cpu_spec->cpu_features); - pr_info(" possible = 0x%016lx\n", CPU_FTRS_POSSIBLE); - pr_info(" always = 0x%016lx\n", CPU_FTRS_ALWAYS); - pr_info("cpu_user_features = 0x%08x 0x%08x\n", cur_cpu_spec->cpu_user_features, - cur_cpu_spec->cpu_user_features2); - pr_info("mmu_features = 0x%08x\n", cur_cpu_spec->mmu_features); - pr_info("firmware_features = 0x%016lx\n", powerpc_firmware_features); - -#ifdef CONFIG_PPC_STD_MMU_64 - if (htab_address) - pr_info("htab_address = 0x%p\n", htab_address); - - pr_info("htab_hash_mask = 0x%lx\n", htab_hash_mask); -#endif - - if (PHYSICAL_START > 0) - pr_info("physical_start = 0x%llx\n", - (unsigned long long)PHYSICAL_START); - pr_info("-----------------------------------------------------\n"); + /* For use by binfmt_elf */ + dcache_bsize = ppc64_caches.dline_size; + icache_bsize = ppc64_caches.iline_size; - DBG(" <- setup_system()\n"); + DBG(" <- initialize_cache_info()\n"); } /* This returns the limit below which memory accesses to the linear @@ -584,7 +476,7 @@ void __init setup_system(void) * used to allocate interrupt or emergency stacks for which our * exception entry path doesn't deal with being interrupted. */ -static u64 safe_stack_limit(void) +static __init u64 safe_stack_limit(void) { #ifdef CONFIG_PPC_BOOK3E /* Freescale BookE bolts the entire linear mapping */ @@ -600,7 +492,7 @@ static u64 safe_stack_limit(void) #endif } -static void __init irqstack_early_init(void) +void __init irqstack_early_init(void) { u64 limit = safe_stack_limit(); unsigned int i; @@ -620,7 +512,7 @@ static void __init irqstack_early_init(void) } #ifdef CONFIG_PPC_BOOK3E -static void __init exc_lvl_early_init(void) +void __init exc_lvl_early_init(void) { unsigned int i; unsigned long sp; @@ -642,8 +534,6 @@ static void __init exc_lvl_early_init(void) if (cpu_has_feature(CPU_FTR_DEBUG_LVL_EXC)) patch_exception(0x040, exc_debug_debug_book3e); } -#else -#define exc_lvl_early_init() #endif /* @@ -651,7 +541,7 @@ static void __init exc_lvl_early_init(void) * early in SMP boots before relocation is enabled. Exclusive emergency * stack for machine checks. */ -static void __init emergency_stack_init(void) +void __init emergency_stack_init(void) { u64 limit; unsigned int i; @@ -682,61 +572,6 @@ static void __init emergency_stack_init(void) } } -/* - * Called into from start_kernel this initializes memblock, which is used - * to manage page allocation until mem_init is called. - */ -void __init setup_arch(char **cmdline_p) -{ - *cmdline_p = boot_command_line; - - /* - * Set cache line size based on type of cpu as a default. - * Systems with OF can look in the properties on the cpu node(s) - * for a possibly more accurate value. - */ - dcache_bsize = ppc64_caches.dline_size; - icache_bsize = ppc64_caches.iline_size; - - if (ppc_md.panic) - setup_panic(); - - klp_init_thread_info(&init_thread_info); - - init_mm.start_code = (unsigned long)_stext; - init_mm.end_code = (unsigned long) _etext; - init_mm.end_data = (unsigned long) _edata; - init_mm.brk = klimit; -#ifdef CONFIG_PPC_64K_PAGES - init_mm.context.pte_frag = NULL; -#endif -#ifdef CONFIG_SPAPR_TCE_IOMMU - mm_iommu_init(&init_mm.context); -#endif - irqstack_early_init(); - exc_lvl_early_init(); - emergency_stack_init(); - - initmem_init(); - -#ifdef CONFIG_DUMMY_CONSOLE - conswitchp = &dummy_con; -#endif - - if (ppc_md.setup_arch) - ppc_md.setup_arch(); - - paging_init(); - - /* Initialize the MMU context management stuff */ - mmu_context_init(); - - /* Interrupt code needs to be 64K-aligned */ - if ((unsigned long)_stext & 0xffff) - panic("Kernelbase not 64K-aligned (0x%lx)!\n", - (unsigned long)_stext); -} - #ifdef CONFIG_SMP #define PCPU_DYN_SIZE () |