summaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/44x/warp.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/platforms/44x/warp.c')
-rw-r--r--arch/powerpc/platforms/44x/warp.c293
1 files changed, 243 insertions, 50 deletions
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index 39cf6150a72b..9565995cba7f 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -12,6 +12,9 @@
#include <linux/init.h>
#include <linux/of_platform.h>
#include <linux/kthread.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
#include <asm/machdep.h>
#include <asm/prom.h>
@@ -27,6 +30,18 @@ static __initdata struct of_device_id warp_of_bus[] = {
{},
};
+static __initdata struct i2c_board_info warp_i2c_info[] = {
+ { I2C_BOARD_INFO("ad7414", 0x4a) }
+};
+
+static int __init warp_arch_init(void)
+{
+ /* This should go away once support is moved to the dts. */
+ i2c_register_board_info(0, warp_i2c_info, ARRAY_SIZE(warp_i2c_info));
+ return 0;
+}
+machine_arch_initcall(warp, warp_arch_init);
+
static int __init warp_device_probe(void)
{
of_platform_bus_probe(NULL, warp_of_bus, NULL);
@@ -52,61 +67,232 @@ define_machine(warp) {
};
-#define LED_GREEN (0x80000000 >> 0)
-#define LED_RED (0x80000000 >> 1)
+/* I am not sure this is the best place for this... */
+static int __init warp_post_info(void)
+{
+ struct device_node *np;
+ void __iomem *fpga;
+ u32 post1, post2;
+
+ /* Sighhhh... POST information is in the sd area. */
+ np = of_find_compatible_node(NULL, NULL, "pika,fpga-sd");
+ if (np == NULL)
+ return -ENOENT;
+
+ fpga = of_iomap(np, 0);
+ of_node_put(np);
+ if (fpga == NULL)
+ return -ENOENT;
+
+ post1 = in_be32(fpga + 0x40);
+ post2 = in_be32(fpga + 0x44);
+
+ iounmap(fpga);
+
+ if (post1 || post2)
+ printk(KERN_INFO "Warp POST %08x %08x\n", post1, post2);
+ else
+ printk(KERN_INFO "Warp POST OK\n");
+
+ return 0;
+}
+machine_late_initcall(warp, warp_post_info);
+
+
+#ifdef CONFIG_SENSORS_AD7414
+
+static LIST_HEAD(dtm_shutdown_list);
+static void __iomem *dtm_fpga;
+static void __iomem *gpio_base;
+
+
+struct dtm_shutdown {
+ struct list_head list;
+ void (*func)(void *arg);
+ void *arg;
+};
-/* This is for the power LEDs 1 = on, 0 = off, -1 = leave alone */
-void warp_set_power_leds(int green, int red)
+int pika_dtm_register_shutdown(void (*func)(void *arg), void *arg)
{
- static void __iomem *gpio_base = NULL;
- unsigned leds;
-
- if (gpio_base == NULL) {
- struct device_node *np;
-
- /* Power LEDS are on the second GPIO controller */
- np = of_find_compatible_node(NULL, NULL, "ibm,gpio-440EP");
- if (np)
- np = of_find_compatible_node(np, NULL, "ibm,gpio-440EP");
- if (np == NULL) {
- printk(KERN_ERR __FILE__ ": Unable to find gpio\n");
- return;
+ struct dtm_shutdown *shutdown;
+
+ shutdown = kmalloc(sizeof(struct dtm_shutdown), GFP_KERNEL);
+ if (shutdown == NULL)
+ return -ENOMEM;
+
+ shutdown->func = func;
+ shutdown->arg = arg;
+
+ list_add(&shutdown->list, &dtm_shutdown_list);
+
+ return 0;
+}
+
+int pika_dtm_unregister_shutdown(void (*func)(void *arg), void *arg)
+{
+ struct dtm_shutdown *shutdown;
+
+ list_for_each_entry(shutdown, &dtm_shutdown_list, list)
+ if (shutdown->func == func && shutdown->arg == arg) {
+ list_del(&shutdown->list);
+ kfree(shutdown);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static irqreturn_t temp_isr(int irq, void *context)
+{
+ struct dtm_shutdown *shutdown;
+
+ local_irq_disable();
+
+ /* Run through the shutdown list. */
+ list_for_each_entry(shutdown, &dtm_shutdown_list, list)
+ shutdown->func(shutdown->arg);
+
+ printk(KERN_EMERG "\n\nCritical Temperature Shutdown\n");
+
+ while (1) {
+ if (dtm_fpga) {
+ unsigned reset = in_be32(dtm_fpga + 0x14);
+ out_be32(dtm_fpga + 0x14, reset);
}
- gpio_base = of_iomap(np, 0);
- of_node_put(np);
- if (gpio_base == NULL) {
- printk(KERN_ERR __FILE__ ": Unable to map gpio");
- return;
+ if (gpio_base) {
+ unsigned leds = in_be32(gpio_base);
+
+ /* green off, red toggle */
+ leds &= ~0x80000000;
+ leds ^= 0x40000000;
+
+ out_be32(gpio_base, leds);
}
+
+ mdelay(500);
+ }
+}
+
+static int pika_setup_leds(void)
+{
+ struct device_node *np;
+ const u32 *gpios;
+ int len;
+
+ np = of_find_compatible_node(NULL, NULL, "linux,gpio-led");
+ if (!np) {
+ printk(KERN_ERR __FILE__ ": Unable to find gpio-led\n");
+ return -ENOENT;
}
- leds = in_be32(gpio_base);
+ gpios = of_get_property(np, "gpios", &len);
+ of_node_put(np);
+ if (!gpios || len < 4) {
+ printk(KERN_ERR __FILE__
+ ": Unable to get gpios property (%d)\n", len);
+ return -ENOENT;
+ }
- switch (green) {
- case 0: leds &= ~LED_GREEN; break;
- case 1: leds |= LED_GREEN; break;
+ np = of_find_node_by_phandle(gpios[0]);
+ if (!np) {
+ printk(KERN_ERR __FILE__ ": Unable to find gpio\n");
+ return -ENOENT;
}
- switch (red) {
- case 0: leds &= ~LED_RED; break;
- case 1: leds |= LED_RED; break;
+
+ gpio_base = of_iomap(np, 0);
+ of_node_put(np);
+ if (!gpio_base) {
+ printk(KERN_ERR __FILE__ ": Unable to map gpio");
+ return -ENOMEM;
}
- out_be32(gpio_base, leds);
+ return 0;
}
-EXPORT_SYMBOL(warp_set_power_leds);
+static void pika_setup_critical_temp(struct i2c_client *client)
+{
+ struct device_node *np;
+ int irq, rc;
+
+ /* Do this before enabling critical temp interrupt since we
+ * may immediately interrupt.
+ */
+ pika_setup_leds();
+
+ /* These registers are in 1 degree increments. */
+ i2c_smbus_write_byte_data(client, 2, 65); /* Thigh */
+ i2c_smbus_write_byte_data(client, 3, 55); /* Tlow */
+
+ np = of_find_compatible_node(NULL, NULL, "adi,ad7414");
+ if (np == NULL) {
+ printk(KERN_ERR __FILE__ ": Unable to find ad7414\n");
+ return;
+ }
+
+ irq = irq_of_parse_and_map(np, 0);
+ of_node_put(np);
+ if (irq == NO_IRQ) {
+ printk(KERN_ERR __FILE__ ": Unable to get ad7414 irq\n");
+ return;
+ }
+
+ rc = request_irq(irq, temp_isr, 0, "ad7414", NULL);
+ if (rc) {
+ printk(KERN_ERR __FILE__
+ ": Unable to request ad7414 irq %d = %d\n", irq, rc);
+ return;
+ }
+}
+
+static inline void pika_dtm_check_fan(void __iomem *fpga)
+{
+ static int fan_state;
+ u32 fan = in_be32(fpga + 0x34) & (1 << 14);
+
+ if (fan_state != fan) {
+ fan_state = fan;
+ if (fan)
+ printk(KERN_WARNING "Fan rotation error detected."
+ " Please check hardware.\n");
+ }
+}
-#ifdef CONFIG_SENSORS_AD7414
static int pika_dtm_thread(void __iomem *fpga)
{
- extern int ad7414_get_temp(int index);
+ struct i2c_adapter *adap;
+ struct i2c_client *client;
+
+ /* We loop in case either driver was compiled as a module and
+ * has not been insmoded yet.
+ */
+ while (!(adap = i2c_get_adapter(0))) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(HZ);
+ }
+
+ while (1) {
+ list_for_each_entry(client, &adap->clients, list)
+ if (client->addr == 0x4a)
+ goto found_it;
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(HZ);
+ }
+
+found_it:
+ i2c_put_adapter(adap);
+
+ pika_setup_critical_temp(client);
+
+ printk(KERN_INFO "PIKA DTM thread running.\n");
while (!kthread_should_stop()) {
- int temp = ad7414_get_temp(0);
+ u16 temp = swab16(i2c_smbus_read_word_data(client, 0));
+ out_be32(fpga + 0x20, temp);
- out_be32(fpga, temp);
+ pika_dtm_check_fan(fpga);
set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout(HZ);
@@ -115,37 +301,44 @@ static int pika_dtm_thread(void __iomem *fpga)
return 0;
}
+
static int __init pika_dtm_start(void)
{
struct task_struct *dtm_thread;
struct device_node *np;
- struct resource res;
- void __iomem *fpga;
np = of_find_compatible_node(NULL, NULL, "pika,fpga");
if (np == NULL)
return -ENOENT;
- /* We do not call of_iomap here since it would map in the entire
- * fpga space, which is over 8k.
- */
- if (of_address_to_resource(np, 0, &res)) {
- of_node_put(np);
- return -ENOENT;
- }
+ dtm_fpga = of_iomap(np, 0);
of_node_put(np);
-
- fpga = ioremap(res.start, 0x24);
- if (fpga == NULL)
+ if (dtm_fpga == NULL)
return -ENOENT;
- dtm_thread = kthread_run(pika_dtm_thread, fpga + 0x20, "pika-dtm");
+ dtm_thread = kthread_run(pika_dtm_thread, dtm_fpga, "pika-dtm");
if (IS_ERR(dtm_thread)) {
- iounmap(fpga);
+ iounmap(dtm_fpga);
return PTR_ERR(dtm_thread);
}
return 0;
}
-device_initcall(pika_dtm_start);
+machine_late_initcall(warp, pika_dtm_start);
+
+#else /* !CONFIG_SENSORS_AD7414 */
+
+int pika_dtm_register_shutdown(void (*func)(void *arg), void *arg)
+{
+ return 0;
+}
+
+int pika_dtm_unregister_shutdown(void (*func)(void *arg), void *arg)
+{
+ return 0;
+}
+
#endif
+
+EXPORT_SYMBOL(pika_dtm_register_shutdown);
+EXPORT_SYMBOL(pika_dtm_unregister_shutdown);