summaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/cell
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/platforms/cell')
-rw-r--r--arch/powerpc/platforms/cell/interrupt.c111
-rw-r--r--arch/powerpc/platforms/cell/interrupt.h4
-rw-r--r--arch/powerpc/platforms/cell/setup.c12
-rw-r--r--arch/powerpc/platforms/cell/spider-pic.c173
4 files changed, 142 insertions, 158 deletions
diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c
index 22da1335445a..97936f547f19 100644
--- a/arch/powerpc/platforms/cell/interrupt.c
+++ b/arch/powerpc/platforms/cell/interrupt.c
@@ -37,64 +37,51 @@
struct iic {
struct cbe_iic_thread_regs __iomem *regs;
u8 target_id;
+ u8 eoi_stack[16];
+ int eoi_ptr;
};
static DEFINE_PER_CPU(struct iic, iic);
-void iic_local_enable(void)
+static void iic_mask(unsigned int irq)
{
- struct iic *iic = &__get_cpu_var(iic);
- u64 tmp;
-
- /*
- * There seems to be a bug that is present in DD2.x CPUs
- * and still only partially fixed in DD3.1.
- * This bug causes a value written to the priority register
- * not to make it there, resulting in a system hang unless we
- * write it again.
- * Masking with 0xf0 is done because the Cell BE does not
- * implement the lower four bits of the interrupt priority,
- * they always read back as zeroes, although future CPUs
- * might implement different bits.
- */
- do {
- out_be64(&iic->regs->prio, 0xff);
- tmp = in_be64(&iic->regs->prio);
- } while ((tmp & 0xf0) != 0xf0);
-}
-
-void iic_local_disable(void)
-{
- out_be64(&__get_cpu_var(iic).regs->prio, 0x0);
-}
-
-static unsigned int iic_startup(unsigned int irq)
-{
- return 0;
-}
-
-static void iic_enable(unsigned int irq)
-{
- iic_local_enable();
}
-static void iic_disable(unsigned int irq)
+static void iic_unmask(unsigned int irq)
{
}
-static void iic_end(unsigned int irq)
+static void iic_eoi(unsigned int irq)
{
- iic_local_enable();
+ struct iic *iic = &__get_cpu_var(iic);
+ out_be64(&iic->regs->prio, iic->eoi_stack[--iic->eoi_ptr]);
+ BUG_ON(iic->eoi_ptr < 0);
}
-static struct hw_interrupt_type iic_pic = {
+static struct irq_chip iic_chip = {
.typename = " CELL-IIC ",
- .startup = iic_startup,
- .enable = iic_enable,
- .disable = iic_disable,
- .end = iic_end,
+ .mask = iic_mask,
+ .unmask = iic_unmask,
+ .eoi = iic_eoi,
};
+/* XXX All of this has to be reworked completely. We need to assign a real
+ * interrupt numbers to the external interrupts and remove all the hard coded
+ * interrupt maps (rely on the device-tree whenever possible).
+ *
+ * Basically, my scheme is to define the "pendings" bits to be the HW interrupt
+ * number (ignoring the data and flags here). That means we can sort-of split
+ * external sources based on priority, and we can use request_irq() on pretty
+ * much anything.
+ *
+ * For spider or axon, they have their own interrupt space. spider will just have
+ * local "hardward" interrupts 0...xx * node stride. The node stride is not
+ * necessary (separate interrupt chips will have separate HW number space), but
+ * will allow to be compatible with existing device-trees.
+ *
+ * All of thise little world will get a standard remapping scheme to map those HW
+ * numbers into the linux flat irq number space.
+*/
static int iic_external_get_irq(struct cbe_iic_pending_bits pending)
{
int irq;
@@ -118,9 +105,10 @@ static int iic_external_get_irq(struct cbe_iic_pending_bits pending)
*/
if (pending.class != 2)
break;
- irq = IIC_EXT_OFFSET
- + spider_get_irq(node)
- + node * IIC_NODE_STRIDE;
+ /* TODO: We might want to silently ignore cascade interrupts
+ * when no cascade handler exist yet
+ */
+ irq = IIC_EXT_CASCADE + node * IIC_NODE_STRIDE;
break;
case 0x01 ... 0x04:
case 0x07 ... 0x0a:
@@ -152,6 +140,8 @@ int iic_get_irq(struct pt_regs *regs)
iic = &__get_cpu_var(iic);
*(unsigned long *) &pending =
in_be64((unsigned long __iomem *) &iic->regs->pending_destr);
+ iic->eoi_stack[++iic->eoi_ptr] = pending.prio;
+ BUG_ON(iic->eoi_ptr > 15);
irq = -1;
if (pending.flags & CBE_IIC_IRQ_VALID) {
@@ -172,7 +162,7 @@ int iic_get_irq(struct pt_regs *regs)
/* hardcoded part to be compatible with older firmware */
-static int setup_iic_hardcoded(void)
+static int __init setup_iic_hardcoded(void)
{
struct device_node *np;
int nodeid, cpu;
@@ -207,12 +197,13 @@ static int setup_iic_hardcoded(void)
printk(KERN_INFO "IIC for CPU %d at %lx\n", cpu, regs);
iic->regs = ioremap(regs, sizeof(struct cbe_iic_thread_regs));
iic->target_id = (nodeid << 4) + ((cpu & 1) ? 0xf : 0xe);
+ iic->eoi_stack[0] = 0xff;
}
return 0;
}
-static int setup_iic(void)
+static int __init setup_iic(void)
{
struct device_node *dn;
unsigned long *regs;
@@ -248,11 +239,14 @@ static int setup_iic(void)
iic = &per_cpu(iic, np[0]);
iic->regs = ioremap(regs[0], sizeof(struct cbe_iic_thread_regs));
iic->target_id = ((np[0] & 2) << 3) + ((np[0] & 1) ? 0xf : 0xe);
+ iic->eoi_stack[0] = 0xff;
printk("IIC for CPU %d at %lx mapped to %p\n", np[0], regs[0], iic->regs);
iic = &per_cpu(iic, np[1]);
iic->regs = ioremap(regs[2], sizeof(struct cbe_iic_thread_regs));
iic->target_id = ((np[1] & 2) << 3) + ((np[1] & 1) ? 0xf : 0xe);
+ iic->eoi_stack[0] = 0xff;
+
printk("IIC for CPU %d at %lx mapped to %p\n", np[1], regs[2], iic->regs);
found++;
@@ -304,10 +298,10 @@ static void iic_request_ipi(int ipi, const char *name)
int irq;
irq = iic_ipi_to_irq(ipi);
+
/* IPIs are marked IRQF_DISABLED as they must run with irqs
* disabled */
- get_irq_desc(irq)->chip = &iic_pic;
- get_irq_desc(irq)->status |= IRQ_PER_CPU;
+ set_irq_chip_and_handler(irq, &iic_chip, handle_percpu_irq);
request_irq(irq, iic_ipi_action, IRQF_DISABLED, name, NULL);
}
@@ -321,20 +315,26 @@ void iic_request_IPIs(void)
}
#endif /* CONFIG_SMP */
-static void iic_setup_spe_handlers(void)
+static void __init iic_setup_builtin_handlers(void)
{
int be, isrc;
- /* Assume two threads per BE are present */
+ /* XXX FIXME: Assume two threads per BE are present */
for (be=0; be < num_present_cpus() / 2; be++) {
+ int irq;
+
+ /* setup SPE chip and handlers */
for (isrc = 0; isrc < IIC_CLASS_STRIDE * 3; isrc++) {
- int irq = IIC_NODE_STRIDE * be + IIC_SPE_OFFSET + isrc;
- get_irq_desc(irq)->chip = &iic_pic;
+ irq = IIC_NODE_STRIDE * be + IIC_SPE_OFFSET + isrc;
+ set_irq_chip_and_handler(irq, &iic_chip, handle_fasteoi_irq);
}
+ /* setup cascade chip */
+ irq = IIC_EXT_CASCADE + be * IIC_NODE_STRIDE;
+ set_irq_chip_and_handler(irq, &iic_chip, handle_fasteoi_irq);
}
}
-void iic_init_IRQ(void)
+void __init iic_init_IRQ(void)
{
int cpu, irq_offset;
struct iic *iic;
@@ -348,5 +348,6 @@ void iic_init_IRQ(void)
if (iic->regs)
out_be64(&iic->regs->prio, 0xff);
}
- iic_setup_spe_handlers();
+ iic_setup_builtin_handlers();
+
}
diff --git a/arch/powerpc/platforms/cell/interrupt.h b/arch/powerpc/platforms/cell/interrupt.h
index 799f77d98f96..c74515aeb630 100644
--- a/arch/powerpc/platforms/cell/interrupt.h
+++ b/arch/powerpc/platforms/cell/interrupt.h
@@ -38,6 +38,7 @@
enum {
IIC_EXT_OFFSET = 0x00, /* Start of south bridge IRQs */
+ IIC_EXT_CASCADE = 0x20, /* There is no interrupt 32 on spider */
IIC_NUM_EXT = 0x40, /* Number of south bridge IRQs */
IIC_SPE_OFFSET = 0x40, /* Start of SPE interrupts */
IIC_CLASS_STRIDE = 0x10, /* SPE IRQs per class */
@@ -51,13 +52,10 @@ extern int iic_get_irq(struct pt_regs *regs);
extern void iic_cause_IPI(int cpu, int mesg);
extern void iic_request_IPIs(void);
extern void iic_setup_cpu(void);
-extern void iic_local_enable(void);
-extern void iic_local_disable(void);
extern u8 iic_get_target_id(int cpu);
extern void spider_init_IRQ(void);
-extern int spider_get_irq(int node);
#endif
#endif /* ASM_CELL_PIC_H */
diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c
index 01ec39431fb0..70a4e903f7e2 100644
--- a/arch/powerpc/platforms/cell/setup.c
+++ b/arch/powerpc/platforms/cell/setup.c
@@ -80,10 +80,14 @@ static void cell_progress(char *s, unsigned short hex)
printk("*** %04x : %s\n", hex, s ? s : "");
}
+static void __init cell_init_irq(void)
+{
+ iic_init_IRQ();
+ spider_init_IRQ();
+}
+
static void __init cell_setup_arch(void)
{
- ppc_md.init_IRQ = iic_init_IRQ;
- ppc_md.get_irq = iic_get_irq;
#ifdef CONFIG_SPU_BASE
spu_priv1_ops = &spu_priv1_mmio_ops;
#endif
@@ -109,7 +113,6 @@ static void __init cell_setup_arch(void)
/* Find and initialize PCI host bridges */
init_pci_config_tokens();
find_and_init_phbs();
- spider_init_IRQ();
cbe_pervasive_init();
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
@@ -174,6 +177,9 @@ define_machine(cell) {
.calibrate_decr = generic_calibrate_decr,
.check_legacy_ioport = cell_check_legacy_ioport,
.progress = cell_progress,
+ .init_IRQ = cell_init_irq,
+ .get_irq = iic_get_irq,
+
#ifdef CONFIG_KEXEC
.machine_kexec = default_machine_kexec,
.machine_kexec_prepare = default_machine_kexec_prepare,
diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c
index 7c3a0b6d34fd..98425acb6cda 100644
--- a/arch/powerpc/platforms/cell/spider-pic.c
+++ b/arch/powerpc/platforms/cell/spider-pic.c
@@ -82,17 +82,20 @@ static void __iomem *spider_get_irq_config(int irq)
return pic + TIR_CFGA + 8 * spider_get_nr(irq);
}
-static void spider_enable_irq(unsigned int irq)
+static void spider_unmask_irq(unsigned int irq)
{
int nodeid = (irq / IIC_NODE_STRIDE) * 0x10;
void __iomem *cfg = spider_get_irq_config(irq);
irq = spider_get_nr(irq);
+ /* FIXME: Most of that is configuration and has nothing to do with enabling/disable,
+ * besides, it's also partially bogus.
+ */
out_be32(cfg, (in_be32(cfg) & ~0xf0)| 0x3107000eu | nodeid);
out_be32(cfg + 4, in_be32(cfg + 4) | 0x00020000u | irq);
}
-static void spider_disable_irq(unsigned int irq)
+static void spider_mask_irq(unsigned int irq)
{
void __iomem *cfg = spider_get_irq_config(irq);
irq = spider_get_nr(irq);
@@ -100,39 +103,21 @@ static void spider_disable_irq(unsigned int irq)
out_be32(cfg, in_be32(cfg) & ~0x30000000u);
}
-static unsigned int spider_startup_irq(unsigned int irq)
-{
- spider_enable_irq(irq);
- return 0;
-}
-
-static void spider_shutdown_irq(unsigned int irq)
-{
- spider_disable_irq(irq);
-}
-
-static void spider_end_irq(unsigned int irq)
-{
- spider_enable_irq(irq);
-}
-
static void spider_ack_irq(unsigned int irq)
{
- spider_disable_irq(irq);
- iic_local_enable();
+ /* Should reset edge detection logic but we don't configure any edge interrupt
+ * at the moment.
+ */
}
-static struct hw_interrupt_type spider_pic = {
+static struct irq_chip spider_pic = {
.typename = " SPIDER ",
- .startup = spider_startup_irq,
- .shutdown = spider_shutdown_irq,
- .enable = spider_enable_irq,
- .disable = spider_disable_irq,
+ .unmask = spider_unmask_irq,
+ .mask = spider_mask_irq,
.ack = spider_ack_irq,
- .end = spider_end_irq,
};
-int spider_get_irq(int node)
+static int spider_get_irq(int node)
{
unsigned long cs;
void __iomem *regs = spider_pics[node];
@@ -145,95 +130,89 @@ int spider_get_irq(int node)
return cs;
}
+static void spider_irq_cascade(unsigned int irq, struct irq_desc *desc,
+ struct pt_regs *regs)
+{
+ int node = (int)(long)desc->handler_data;
+ int cascade_irq;
+
+ cascade_irq = spider_get_irq(node);
+ generic_handle_irq(cascade_irq, regs);
+ desc->chip->eoi(irq);
+}
+
/* hardcoded part to be compatible with older firmware */
-void spider_init_IRQ_hardcoded(void)
+static void __init spider_init_one(int node, unsigned long addr)
{
- int node;
- long spiderpic;
- long pics[] = { 0x24000008000, 0x34000008000 };
- int n;
-
- pr_debug("%s(%d): Using hardcoded defaults\n", __FUNCTION__, __LINE__);
-
- for (node = 0; node < num_present_cpus()/2; node++) {
- spiderpic = pics[node];
- printk(KERN_DEBUG "SPIDER addr: %lx\n", spiderpic);
- spider_pics[node] = ioremap(spiderpic, 0x800);
- for (n = 0; n < IIC_NUM_EXT; n++) {
- int irq = n + IIC_EXT_OFFSET + node * IIC_NODE_STRIDE;
- get_irq_desc(irq)->chip = &spider_pic;
- }
-
- /* do not mask any interrupts because of level */
- out_be32(spider_pics[node] + TIR_MSK, 0x0);
-
- /* disable edge detection clear */
- /* out_be32(spider_pics[node] + TIR_EDC, 0x0); */
-
- /* enable interrupt packets to be output */
- out_be32(spider_pics[node] + TIR_PIEN,
- in_be32(spider_pics[node] + TIR_PIEN) | 0x1);
-
- /* Enable the interrupt detection enable bit. Do this last! */
- out_be32(spider_pics[node] + TIR_DEN,
- in_be32(spider_pics[node] + TIR_DEN) | 0x1);
+ int n, irq;
+
+ spider_pics[node] = ioremap(addr, 0x800);
+ if (spider_pics[node] == NULL)
+ panic("spider_pic: can't map registers !");
+
+ printk(KERN_INFO "spider_pic: mapped for node %d, addr: 0x%lx mapped to %p\n",
+ node, addr, spider_pics[node]);
+
+ for (n = 0; n < IIC_NUM_EXT; n++) {
+ if (n == IIC_EXT_CASCADE)
+ continue;
+ irq = n + IIC_EXT_OFFSET + node * IIC_NODE_STRIDE;
+ set_irq_chip_and_handler(irq, &spider_pic, handle_level_irq);
+ get_irq_desc(irq)->status |= IRQ_LEVEL;
}
+
+ /* do not mask any interrupts because of level */
+ out_be32(spider_pics[node] + TIR_MSK, 0x0);
+
+ /* disable edge detection clear */
+ /* out_be32(spider_pics[node] + TIR_EDC, 0x0); */
+
+ /* enable interrupt packets to be output */
+ out_be32(spider_pics[node] + TIR_PIEN,
+ in_be32(spider_pics[node] + TIR_PIEN) | 0x1);
+
+ /* Hook up cascade */
+ irq = IIC_EXT_CASCADE + node * IIC_NODE_STRIDE;
+ set_irq_data(irq, (void *)(long)node);
+ set_irq_chained_handler(irq, spider_irq_cascade);
+
+ /* Enable the interrupt detection enable bit. Do this last! */
+ out_be32(spider_pics[node] + TIR_DEN,
+ in_be32(spider_pics[node] + TIR_DEN) | 0x1);
}
-void spider_init_IRQ(void)
+void __init spider_init_IRQ(void)
{
- long spider_reg;
+ unsigned long *spider_reg;
struct device_node *dn;
char *compatible;
- int n, node = 0;
-
+ int node = 0;
+
+ /* XXX node numbers are totally bogus. We _hope_ we get the device nodes in the right
+ * order here but that's definitely not guaranteed, we need to get the node from the
+ * device tree instead. There is currently no proper property for it (but our whole
+ * device-tree is bogus anyway) so all we can do is pray or maybe test the address
+ * and deduce the node-id
+ */
for (dn = NULL; (dn = of_find_node_by_name(dn, "interrupt-controller"));) {
compatible = (char *)get_property(dn, "compatible", NULL);
if (!compatible)
continue;
- if (strstr(compatible, "CBEA,platform-spider-pic"))
- spider_reg = *(long *)get_property(dn,"reg", NULL);
- else if (strstr(compatible, "sti,platform-spider-pic")) {
- spider_init_IRQ_hardcoded();
- return;
+ if (strstr(compatible, "CBEA,platform-spider-pic"))
+ spider_reg = (unsigned long *)get_property(dn, "reg", NULL);
+ else if (strstr(compatible, "sti,platform-spider-pic") && (node < 2)) {
+ static long hard_coded_pics[] = { 0x24000008000, 0x34000008000 };
+ spider_reg = &hard_coded_pics[node];
} else
continue;
- if (!spider_reg)
- printk("interrupt controller does not have reg property !\n");
-
- n = prom_n_addr_cells(dn);
-
- if ( n != 2)
- printk("reg property with invalid number of elements \n");
-
- spider_pics[node] = ioremap(spider_reg, 0x800);
-
- printk("SPIDER addr: %lx with %i addr_cells mapped to %p\n",
- spider_reg, n, spider_pics[node]);
-
- for (n = 0; n < IIC_NUM_EXT; n++) {
- int irq = n + IIC_EXT_OFFSET + node * IIC_NODE_STRIDE;
- get_irq_desc(irq)->chip = &spider_pic;
- }
-
- /* do not mask any interrupts because of level */
- out_be32(spider_pics[node] + TIR_MSK, 0x0);
-
- /* disable edge detection clear */
- /* out_be32(spider_pics[node] + TIR_EDC, 0x0); */
-
- /* enable interrupt packets to be output */
- out_be32(spider_pics[node] + TIR_PIEN,
- in_be32(spider_pics[node] + TIR_PIEN) | 0x1);
-
- /* Enable the interrupt detection enable bit. Do this last! */
- out_be32(spider_pics[node] + TIR_DEN,
- in_be32(spider_pics[node] + TIR_DEN) | 0x1);
+ if (spider_reg == NULL)
+ printk(KERN_ERR "spider_pic: No address for node %d\n", node);
+ spider_init_one(node, *spider_reg);
node++;
}
}