summaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/powermac/pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/platforms/powermac/pci.c')
-rw-r--r--arch/powerpc/platforms/powermac/pci.c68
1 files changed, 46 insertions, 22 deletions
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index d524a915aa86..556b349797e8 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -46,6 +46,9 @@ static int has_uninorth;
static struct pci_controller *u3_agp;
static struct pci_controller *u4_pcie;
static struct pci_controller *u3_ht;
+#define has_second_ohare 0
+#else
+static int has_second_ohare;
#endif /* CONFIG_PPC64 */
extern u8 pci_cache_line_size;
@@ -647,6 +650,33 @@ static void __init init_p2pbridge(void)
early_write_config_word(hose, bus, devfn, PCI_BRIDGE_CONTROL, val);
}
+static void __init init_second_ohare(void)
+{
+ struct device_node *np = of_find_node_by_name(NULL, "pci106b,7");
+ unsigned char bus, devfn;
+ unsigned short cmd;
+
+ if (np == NULL)
+ return;
+
+ /* This must run before we initialize the PICs since the second
+ * ohare hosts a PIC that will be accessed there.
+ */
+ if (pci_device_from_OF_node(np, &bus, &devfn) == 0) {
+ struct pci_controller* hose =
+ pci_find_hose_for_OF_device(np);
+ if (!hose) {
+ printk(KERN_ERR "Can't find PCI hose for OHare2 !\n");
+ return;
+ }
+ early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd);
+ cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+ cmd &= ~PCI_COMMAND_IO;
+ early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd);
+ }
+ has_second_ohare = 1;
+}
+
/*
* Some Apple desktop machines have a NEC PD720100A USB2 controller
* on the motherboard. Open Firmware, on these, will disable the
@@ -688,9 +718,6 @@ static void __init fixup_nec_usb2(void)
" EHCI, fixing up...\n");
data &= ~1UL;
early_write_config_dword(hose, bus, devfn, 0xe4, data);
- early_write_config_byte(hose, bus,
- devfn | 2, PCI_INTERRUPT_LINE,
- nec->intrs[0].line);
}
}
}
@@ -958,32 +985,28 @@ static int __init add_bridge(struct device_node *dev)
return 0;
}
-static void __init pcibios_fixup_OF_interrupts(void)
+void __init pmac_pcibios_fixup(void)
{
struct pci_dev* dev = NULL;
- /*
- * Open Firmware often doesn't initialize the
- * PCI_INTERRUPT_LINE config register properly, so we
- * should find the device node and apply the interrupt
- * obtained from the OF device-tree
- */
for_each_pci_dev(dev) {
- struct device_node *node;
- node = pci_device_to_OF_node(dev);
- /* this is the node, see if it has interrupts */
- if (node && node->n_intrs > 0)
- dev->irq = node->intrs[0].line;
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+ /* Read interrupt from the device-tree */
+ pci_read_irq_line(dev);
+
+ /* Fixup interrupt for the modem/ethernet combo controller.
+ * on machines with a second ohare chip.
+ * The number in the device tree (27) is bogus (correct for
+ * the ethernet-only board but not the combo ethernet/modem
+ * board). The real interrupt is 28 on the second controller
+ * -> 28+32 = 60.
+ */
+ if (has_second_ohare &&
+ dev->vendor == PCI_VENDOR_ID_DEC &&
+ dev->device == PCI_DEVICE_ID_DEC_TULIP_PLUS)
+ dev->irq = irq_create_mapping(NULL, 60, 0);
}
}
-void __init pmac_pcibios_fixup(void)
-{
- /* Fixup interrupts according to OF tree */
- pcibios_fixup_OF_interrupts();
-}
-
#ifdef CONFIG_PPC64
static void __init pmac_fixup_phb_resources(void)
{
@@ -1071,6 +1094,7 @@ void __init pmac_pci_init(void)
#else /* CONFIG_PPC64 */
init_p2pbridge();
+ init_second_ohare();
fixup_nec_usb2();
/* We are still having some issues with the Xserve G4, enabling