diff options
Diffstat (limited to 'arch/powerpc/platforms/pseries')
-rw-r--r-- | arch/powerpc/platforms/pseries/Kconfig | 1 | ||||
-rw-r--r-- | arch/powerpc/platforms/pseries/Makefile | 2 | ||||
-rw-r--r-- | arch/powerpc/platforms/pseries/eeh.c | 24 | ||||
-rw-r--r-- | arch/powerpc/platforms/pseries/firmware.c | 21 | ||||
-rw-r--r-- | arch/powerpc/platforms/pseries/hotplug-cpu.c | 8 | ||||
-rw-r--r-- | arch/powerpc/platforms/pseries/iommu.c | 104 | ||||
-rw-r--r-- | arch/powerpc/platforms/pseries/pci.c | 3 | ||||
-rw-r--r-- | arch/powerpc/platforms/pseries/plpar_wrappers.h | 18 | ||||
-rw-r--r-- | arch/powerpc/platforms/pseries/pseries_energy.c | 37 | ||||
-rw-r--r-- | arch/powerpc/platforms/pseries/setup.c | 20 | ||||
-rw-r--r-- | arch/powerpc/platforms/pseries/smp.c | 33 |
11 files changed, 176 insertions, 95 deletions
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index 837cf49357ed..9a0941bc4d31 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -17,6 +17,7 @@ config PPC_PSERIES select PPC_NATIVE select PPC_PCI_CHOICE if EXPERT select ZLIB_DEFLATE + select PPC_DOORBELL default y config PPC_SPLPAR diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index 890622b87c8f..53866e537a92 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -1,4 +1,4 @@ -ccflags-$(CONFIG_PPC64) := -mno-minimal-toc +ccflags-$(CONFIG_PPC64) := $(NO_MINIMAL_TOC) ccflags-$(CONFIG_PPC_PSERIES_DEBUG) += -DDEBUG obj-y := lpar.o hvCall.o nvram.o reconfig.o \ diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 9a04322b1736..6b73d6c44f51 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -788,7 +788,6 @@ static void eeh_add_device_late(struct pci_dev *dev) dev->dev.archdata.edev = edev; eeh_addr_cache_insert_dev(dev); - eeh_sysfs_add_device(dev); } /** @@ -815,6 +814,29 @@ void eeh_add_device_tree_late(struct pci_bus *bus) EXPORT_SYMBOL_GPL(eeh_add_device_tree_late); /** + * eeh_add_sysfs_files - Add EEH sysfs files for the indicated PCI bus + * @bus: PCI bus + * + * This routine must be used to add EEH sysfs files for PCI + * devices which are attached to the indicated PCI bus. The PCI bus + * is added after system boot through hotplug or dlpar. + */ +void eeh_add_sysfs_files(struct pci_bus *bus) +{ + struct pci_dev *dev; + + list_for_each_entry(dev, &bus->devices, bus_list) { + eeh_sysfs_add_device(dev); + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) { + struct pci_bus *subbus = dev->subordinate; + if (subbus) + eeh_add_sysfs_files(subbus); + } + } +} +EXPORT_SYMBOL_GPL(eeh_add_sysfs_files); + +/** * eeh_remove_device - Undo EEH setup for the indicated pci device * @dev: pci device to be removed * @purge_pe: remove the PE or not diff --git a/arch/powerpc/platforms/pseries/firmware.c b/arch/powerpc/platforms/pseries/firmware.c index 7b56118f531c..aa3693f7fb27 100644 --- a/arch/powerpc/platforms/pseries/firmware.c +++ b/arch/powerpc/platforms/pseries/firmware.c @@ -33,6 +33,11 @@ typedef struct { char * name; } firmware_feature_t; +/* + * The names in this table match names in rtas/ibm,hypertas-functions. If the + * entry ends in a '*', only upto the '*' is matched. Otherwise the entire + * string must match. + */ static __initdata firmware_feature_t firmware_features_table[FIRMWARE_MAX_FEATURES] = { {FW_FEATURE_PFT, "hcall-pft"}, @@ -57,6 +62,7 @@ firmware_features_table[FIRMWARE_MAX_FEATURES] = { {FW_FEATURE_SPLPAR, "hcall-splpar"}, {FW_FEATURE_VPHN, "hcall-vphn"}, {FW_FEATURE_SET_MODE, "hcall-set-mode"}, + {FW_FEATURE_BEST_ENERGY, "hcall-best-energy-1*"}, }; /* Build up the firmware features bitmask using the contents of @@ -72,9 +78,20 @@ void __init fw_feature_init(const char *hypertas, unsigned long len) for (s = hypertas; s < hypertas + len; s += strlen(s) + 1) { for (i = 0; i < FIRMWARE_MAX_FEATURES; i++) { + const char *name = firmware_features_table[i].name; + size_t size; /* check value against table of strings */ - if (!firmware_features_table[i].name || - strcmp(firmware_features_table[i].name, s)) + if (!name) + continue; + /* + * If there is a '*' at the end of name, only check + * upto there + */ + size = strlen(name); + if (size && name[size - 1] == '*') { + if (strncmp(name, s, size - 1)) + continue; + } else if (strcmp(name, s)) continue; /* we have a match */ diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c index a38956269fbf..217ca5c75b20 100644 --- a/arch/powerpc/platforms/pseries/hotplug-cpu.c +++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c @@ -127,9 +127,16 @@ static void pseries_mach_cpu_die(void) get_lppaca()->donate_dedicated_cpu = 1; while (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) { + while (!prep_irq_for_idle()) { + local_irq_enable(); + local_irq_disable(); + } + extended_cede_processor(cede_latency_hint); } + local_irq_disable(); + if (!get_lppaca()->shared_proc) get_lppaca()->donate_dedicated_cpu = 0; get_lppaca()->idle = 0; @@ -137,6 +144,7 @@ static void pseries_mach_cpu_die(void) if (get_preferred_offline_state(cpu) == CPU_STATE_ONLINE) { unregister_slb_shadow(hwcpu); + hard_irq_disable(); /* * Call to start_secondary_resume() will not return. * Kernel stack will be reset and start_secondary() diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index e2685badb5db..1b2a174e7c59 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -382,6 +382,7 @@ static int tce_clearrange_multi_pSeriesLP(unsigned long start_pfn, rc = plpar_tce_stuff((u64)be32_to_cpu(maprange->liobn), dma_offset, 0, limit); + next += limit * tce_size; num_tce -= limit; } while (num_tce > 0 && !rc); @@ -786,33 +787,68 @@ static u64 find_existing_ddw(struct device_node *pdn) return dma_addr; } +static void __restore_default_window(struct eeh_dev *edev, + u32 ddw_restore_token) +{ + u32 cfg_addr; + u64 buid; + int ret; + + /* + * Get the config address and phb buid of the PE window. + * Rely on eeh to retrieve this for us. + * Retrieve them from the pci device, not the node with the + * dma-window property + */ + cfg_addr = edev->config_addr; + if (edev->pe_config_addr) + cfg_addr = edev->pe_config_addr; + buid = edev->phb->buid; + + do { + ret = rtas_call(ddw_restore_token, 3, 1, NULL, cfg_addr, + BUID_HI(buid), BUID_LO(buid)); + } while (rtas_busy_delay(ret)); + pr_info("ibm,reset-pe-dma-windows(%x) %x %x %x returned %d\n", + ddw_restore_token, cfg_addr, BUID_HI(buid), BUID_LO(buid), ret); +} + static int find_existing_ddw_windows(void) { - int len; struct device_node *pdn; - struct direct_window *window; const struct dynamic_dma_window_prop *direct64; + const u32 *ddw_extensions; if (!firmware_has_feature(FW_FEATURE_LPAR)) return 0; for_each_node_with_property(pdn, DIRECT64_PROPNAME) { - direct64 = of_get_property(pdn, DIRECT64_PROPNAME, &len); + direct64 = of_get_property(pdn, DIRECT64_PROPNAME, NULL); if (!direct64) continue; - window = kzalloc(sizeof(*window), GFP_KERNEL); - if (!window || len < sizeof(struct dynamic_dma_window_prop)) { - kfree(window); - remove_ddw(pdn); - continue; - } + /* + * We need to ensure the IOMMU table is active when we + * return from the IOMMU setup so that the common code + * can clear the table or find the holes. To that end, + * first, remove any existing DDW configuration. + */ + remove_ddw(pdn); - window->device = pdn; - window->prop = direct64; - spin_lock(&direct_window_list_lock); - list_add(&window->list, &direct_window_list); - spin_unlock(&direct_window_list_lock); + /* + * Second, if we are running on a new enough level of + * firmware where the restore API is present, use it to + * restore the 32-bit window, which was removed in + * create_ddw. + * If the API is not present, then create_ddw couldn't + * have removed the 32-bit window in the first place, so + * removing the DDW configuration should be sufficient. + */ + ddw_extensions = of_get_property(pdn, "ibm,ddw-extensions", + NULL); + if (ddw_extensions && ddw_extensions[0] > 0) + __restore_default_window(of_node_to_eeh_dev(pdn), + ddw_extensions[1]); } return 0; @@ -883,32 +919,9 @@ static int create_ddw(struct pci_dev *dev, const u32 *ddw_avail, } static void restore_default_window(struct pci_dev *dev, - u32 ddw_restore_token, unsigned long liobn) + u32 ddw_restore_token) { - struct eeh_dev *edev; - u32 cfg_addr; - u64 buid; - int ret; - - /* - * Get the config address and phb buid of the PE window. - * Rely on eeh to retrieve this for us. - * Retrieve them from the pci device, not the node with the - * dma-window property - */ - edev = pci_dev_to_eeh_dev(dev); - cfg_addr = edev->config_addr; - if (edev->pe_config_addr) - cfg_addr = edev->pe_config_addr; - buid = edev->phb->buid; - - do { - ret = rtas_call(ddw_restore_token, 3, 1, NULL, cfg_addr, - BUID_HI(buid), BUID_LO(buid)); - } while (rtas_busy_delay(ret)); - dev_info(&dev->dev, - "ibm,reset-pe-dma-windows(%x) %x %x %x returned %d\n", - ddw_restore_token, cfg_addr, BUID_HI(buid), BUID_LO(buid), ret); + __restore_default_window(pci_dev_to_eeh_dev(dev), ddw_restore_token); } /* @@ -1099,7 +1112,7 @@ out_free_prop: out_restore_window: if (ddw_restore_token) - restore_default_window(dev, ddw_restore_token, liobn); + restore_default_window(dev, ddw_restore_token); out_unlock: mutex_unlock(&direct_window_init_mutex); @@ -1295,6 +1308,7 @@ static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long acti switch (action) { case OF_RECONFIG_DETACH_NODE: + remove_ddw(np); if (pci && pci->iommu_table) iommu_free_table(pci->iommu_table, np->full_name); @@ -1307,16 +1321,6 @@ static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long acti } } spin_unlock(&direct_window_list_lock); - - /* - * Because the notifier runs after isolation of the - * slot, we are guaranteed any DMA window has already - * been revoked and the TCEs have been marked invalid, - * so we don't need a call to remove_ddw(np). However, - * if an additional notifier action is added before the - * isolate call, we should update this code for - * completeness with such a call. - */ break; default: err = NOTIFY_DONE; diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c index 56b864d777ee..0b580f413a9a 100644 --- a/arch/powerpc/platforms/pseries/pci.c +++ b/arch/powerpc/platforms/pseries/pci.c @@ -40,7 +40,8 @@ void pcibios_name_device(struct pci_dev *dev) */ dn = pci_device_to_OF_node(dev); if (dn) { - const char *loc_code = of_get_property(dn, "ibm,loc-code", 0); + const char *loc_code = of_get_property(dn, "ibm,loc-code", + NULL); if (loc_code) { int loc_len = strlen(loc_code); if (loc_len < sizeof(dev->dev.name)) { diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h index e6cc34a67053..f368668d97b3 100644 --- a/arch/powerpc/platforms/pseries/plpar_wrappers.h +++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h @@ -2,6 +2,7 @@ #define _PSERIES_PLPAR_WRAPPERS_H #include <linux/string.h> +#include <linux/irqflags.h> #include <asm/hvcall.h> #include <asm/paca.h> @@ -41,7 +42,14 @@ static inline long extended_cede_processor(unsigned long latency_hint) u8 old_latency_hint = get_cede_latency_hint(); set_cede_latency_hint(latency_hint); + rc = cede_processor(); +#ifdef CONFIG_TRACE_IRQFLAGS + /* Ensure that H_CEDE returns with IRQs on */ + if (WARN_ON(!(mfmsr() & MSR_EE))) + __hard_irq_enable(); +#endif + set_cede_latency_hint(old_latency_hint); return rc; @@ -304,4 +312,14 @@ static inline long disable_reloc_on_exceptions(void) { return plpar_set_mode(0, 3, 0, 0); } +static inline long plapr_set_ciabr(unsigned long ciabr) +{ + return plpar_set_mode(0, 1, ciabr, 0); +} + +static inline long plapr_set_watchpoint0(unsigned long dawr0, unsigned long dawrx0) +{ + return plpar_set_mode(0, 2, dawr0, dawrx0); +} + #endif /* _PSERIES_PLPAR_WRAPPERS_H */ diff --git a/arch/powerpc/platforms/pseries/pseries_energy.c b/arch/powerpc/platforms/pseries/pseries_energy.c index af281dce510a..a91e6dadda2c 100644 --- a/arch/powerpc/platforms/pseries/pseries_energy.c +++ b/arch/powerpc/platforms/pseries/pseries_energy.c @@ -21,6 +21,7 @@ #include <asm/cputhreads.h> #include <asm/page.h> #include <asm/hvcall.h> +#include <asm/firmware.h> #define MODULE_VERS "1.0" @@ -32,40 +33,6 @@ static int sysfs_entries; /* Helper routines */ -/* - * Routine to detect firmware support for hcall - * return 1 if H_BEST_ENERGY is supported - * else return 0 - */ - -static int check_for_h_best_energy(void) -{ - struct device_node *rtas = NULL; - const char *hypertas, *s; - int length; - int rc = 0; - - rtas = of_find_node_by_path("/rtas"); - if (!rtas) - return 0; - - hypertas = of_get_property(rtas, "ibm,hypertas-functions", &length); - if (!hypertas) { - of_node_put(rtas); - return 0; - } - - /* hypertas will have list of strings with hcall names */ - for (s = hypertas; s < hypertas + length; s += strlen(s) + 1) { - if (!strncmp("hcall-best-energy-1", s, 19)) { - rc = 1; /* Found the string */ - break; - } - } - of_node_put(rtas); - return rc; -} - /* Helper Routines to convert between drc_index to cpu numbers */ static u32 cpu_to_drc_index(int cpu) @@ -262,7 +229,7 @@ static int __init pseries_energy_init(void) int cpu, err; struct device *cpu_dev; - if (!check_for_h_best_energy()) { + if (!firmware_has_feature(FW_FEATURE_BEST_ENERGY)) { printk(KERN_INFO "Hypercall H_BEST_ENERGY not supported\n"); return 0; } diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 527e12c9573b..8bcc9ca6682f 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -65,6 +65,7 @@ #include <asm/smp.h> #include <asm/firmware.h> #include <asm/eeh.h> +#include <asm/reg.h> #include "plpar_wrappers.h" #include "pseries.h" @@ -375,7 +376,7 @@ static void pSeries_idle(void) * to ever be a problem in practice we can move this into a kernel thread to * finish off the process later in boot. */ -static int __init pSeries_enable_reloc_on_exc(void) +long pSeries_enable_reloc_on_exc(void) { long rc; unsigned int delay, total_delay = 0; @@ -397,9 +398,9 @@ static int __init pSeries_enable_reloc_on_exc(void) mdelay(delay); } } +EXPORT_SYMBOL(pSeries_enable_reloc_on_exc); -#ifdef CONFIG_KEXEC -static long pSeries_disable_reloc_on_exc(void) +long pSeries_disable_reloc_on_exc(void) { long rc; @@ -410,7 +411,9 @@ static long pSeries_disable_reloc_on_exc(void) mdelay(get_longbusy_msecs(rc)); } } +EXPORT_SYMBOL(pSeries_disable_reloc_on_exc); +#ifdef CONFIG_KEXEC static void pSeries_machine_kexec(struct kimage *image) { long rc; @@ -498,6 +501,14 @@ static int pseries_set_xdabr(unsigned long dabr, unsigned long dabrx) return plpar_hcall_norets(H_SET_XDABR, dabr, dabrx); } +static int pseries_set_dawr(unsigned long dawr, unsigned long dawrx) +{ + /* PAPR says we can't set HYP */ + dawrx &= ~DAWRX_HYP; + + return plapr_set_watchpoint0(dawr, dawrx); +} + #define CMO_CHARACTERISTICS_TOKEN 44 #define CMO_MAXLENGTH 1026 @@ -604,6 +615,9 @@ static void __init pSeries_init_early(void) else if (firmware_has_feature(FW_FEATURE_DABR)) ppc_md.set_dabr = pseries_set_dabr; + if (firmware_has_feature(FW_FEATURE_SET_MODE)) + ppc_md.set_dawr = pseries_set_dawr; + pSeries_cmo_feature_init(); iommu_init_early_pSeries(); diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index 80cd0be71e06..12bc8c3663ad 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -42,6 +42,7 @@ #include <asm/vdso_datapage.h> #include <asm/cputhreads.h> #include <asm/xics.h> +#include <asm/dbell.h> #include "plpar_wrappers.h" #include "pseries.h" @@ -54,6 +55,11 @@ */ static cpumask_var_t of_spin_mask; +/* + * If we multiplex IPI mechanisms, store the appropriate XICS IPI mechanism here + */ +static void (*xics_cause_ipi)(int cpu, unsigned long data); + /* Query where a cpu is now. Return codes #defined in plpar_wrappers.h */ int smp_query_cpu_stopped(unsigned int pcpu) { @@ -137,6 +143,8 @@ static void smp_xics_setup_cpu(int cpu) { if (cpu != boot_cpuid) xics_setup_cpu(); + if (cpu_has_feature(CPU_FTR_DBELL)) + doorbell_setup_this_cpu(); if (firmware_has_feature(FW_FEATURE_SPLPAR)) vpa_init(cpu); @@ -195,6 +203,27 @@ static int smp_pSeries_cpu_bootable(unsigned int nr) return 1; } +/* Only used on systems that support multiple IPI mechanisms */ +static void pSeries_cause_ipi_mux(int cpu, unsigned long data) +{ + if (cpumask_test_cpu(cpu, cpu_sibling_mask(smp_processor_id()))) + doorbell_cause_ipi(cpu, data); + else + xics_cause_ipi(cpu, data); +} + +static __init int pSeries_smp_probe(void) +{ + int ret = xics_smp_probe(); + + if (cpu_has_feature(CPU_FTR_DBELL)) { + xics_cause_ipi = smp_ops->cause_ipi; + smp_ops->cause_ipi = pSeries_cause_ipi_mux; + } + + return ret; +} + static struct smp_ops_t pSeries_mpic_smp_ops = { .message_pass = smp_mpic_message_pass, .probe = smp_mpic_probe, @@ -204,8 +233,8 @@ static struct smp_ops_t pSeries_mpic_smp_ops = { static struct smp_ops_t pSeries_xics_smp_ops = { .message_pass = NULL, /* Use smp_muxed_ipi_message_pass */ - .cause_ipi = NULL, /* Filled at runtime by xics_smp_probe() */ - .probe = xics_smp_probe, + .cause_ipi = NULL, /* Filled at runtime by pSeries_smp_probe() */ + .probe = pSeries_smp_probe, .kick_cpu = smp_pSeries_kick_cpu, .setup_cpu = smp_xics_setup_cpu, .cpu_bootable = smp_pSeries_cpu_bootable, |