summaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/platforms')
-rw-r--r--arch/powerpc/platforms/85xx/Kconfig27
-rw-r--r--arch/powerpc/platforms/85xx/Makefile1
-rw-r--r--arch/powerpc/platforms/85xx/ge_imp3a.c246
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_cds.c81
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_mds.c35
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_rdb.c215
-rw-r--r--arch/powerpc/platforms/85xx/p1022_ds.c203
-rw-r--r--arch/powerpc/platforms/86xx/Kconfig3
-rw-r--r--arch/powerpc/platforms/86xx/Makefile7
-rw-r--r--arch/powerpc/platforms/86xx/gef_gpio.c171
-rw-r--r--arch/powerpc/platforms/86xx/gef_pic.c252
-rw-r--r--arch/powerpc/platforms/86xx/gef_pic.h11
-rw-r--r--arch/powerpc/platforms/86xx/gef_ppc9a.c2
-rw-r--r--arch/powerpc/platforms/86xx/gef_sbc310.c2
-rw-r--r--arch/powerpc/platforms/86xx/gef_sbc610.c2
-rw-r--r--arch/powerpc/platforms/Kconfig8
16 files changed, 762 insertions, 504 deletions
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index d7946be298b6..f000d81c4e31 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -6,6 +6,7 @@ menuconfig FSL_SOC_BOOKE
select MPIC
select PPC_PCI_CHOICE
select FSL_PCI if PCI
+ select SERIAL_8250_EXTENDED if SERIAL_8250
select SERIAL_8250_SHARE_IRQ if SERIAL_8250
default y
@@ -13,6 +14,15 @@ if FSL_SOC_BOOKE
if PPC32
+config FSL_85XX_CACHE_SRAM
+ bool
+ select PPC_LIB_RHEAP
+ help
+ When selected, this option enables cache-sram support
+ for memory allocation on P1/P2 QorIQ platforms.
+ cache-sram-size and cache-sram-offset kernel boot
+ parameters should be passed when this option is enabled.
+
config MPC8540_ADS
bool "Freescale MPC8540 ADS"
select DEFAULT_UIMAGE
@@ -30,6 +40,7 @@ config MPC85xx_CDS
bool "Freescale MPC85xx CDS"
select DEFAULT_UIMAGE
select PPC_I8259
+ select HAS_RAPIDIO
help
This option enables support for the MPC85xx CDS board
@@ -80,7 +91,6 @@ config P1010_RDB
config P1022_DS
bool "Freescale P1022 DS"
select DEFAULT_UIMAGE
- select PHYS_64BIT # The DTS has 36-bit addresses
select SWIOTLB
help
This option enables support for the Freescale P1022DS reference board.
@@ -171,6 +181,21 @@ config SBC8560
help
This option enables support for the Wind River SBC8560 board
+config GE_IMP3A
+ bool "GE Intelligent Platforms IMP3A"
+ select DEFAULT_UIMAGE
+ select SWIOTLB
+ select MMIO_NVRAM
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ select GE_FPGA
+ help
+ This option enables support for the GE Intelligent Platforms IMP3A
+ board.
+
+ This board is a 3U CompactPCI Single Board Computer with a Freescale
+ P2020 processor.
+
config P2041_RDB
bool "Freescale P2041 RDB"
select DEFAULT_UIMAGE
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 9cb2d4320dcc..2125d4ca068a 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -27,3 +27,4 @@ obj-$(CONFIG_SBC8548) += sbc8548.o
obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o
obj-$(CONFIG_KSI8560) += ksi8560.o
obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o
+obj-$(CONFIG_GE_IMP3A) += ge_imp3a.o
diff --git a/arch/powerpc/platforms/85xx/ge_imp3a.c b/arch/powerpc/platforms/85xx/ge_imp3a.c
new file mode 100644
index 000000000000..d50056f424f6
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/ge_imp3a.c
@@ -0,0 +1,246 @@
+/*
+ * GE IMP3A Board Setup
+ *
+ * Author Martyn Welch <martyn.welch@ge.com>
+ *
+ * Copyright 2010 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Based on: mpc85xx_ds.c (MPC85xx DS Board Setup)
+ * Copyright 2007 Freescale Semiconductor Inc.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+#include <linux/of_platform.h>
+#include <linux/memblock.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+#include <asm/swiotlb.h>
+#include <asm/nvram.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
+#include <sysdev/ge/ge_pic.h>
+
+void __iomem *imp3a_regs;
+
+void __init ge_imp3a_pic_init(void)
+{
+ struct mpic *mpic;
+ struct device_node *np;
+ struct device_node *cascade_node = NULL;
+ unsigned long root = of_get_flat_dt_root();
+
+ if (of_flat_dt_is_compatible(root, "fsl,MPC8572DS-CAMP")) {
+ mpic = mpic_alloc(NULL, 0,
+ MPIC_NO_RESET |
+ MPIC_BIG_ENDIAN |
+ MPIC_SINGLE_DEST_CPU,
+ 0, 256, " OpenPIC ");
+ } else {
+ mpic = mpic_alloc(NULL, 0,
+ MPIC_BIG_ENDIAN |
+ MPIC_SINGLE_DEST_CPU,
+ 0, 256, " OpenPIC ");
+ }
+
+ BUG_ON(mpic == NULL);
+ mpic_init(mpic);
+ /*
+ * There is a simple interrupt handler in the main FPGA, this needs
+ * to be cascaded into the MPIC
+ */
+ for_each_node_by_type(np, "interrupt-controller")
+ if (of_device_is_compatible(np, "gef,fpga-pic-1.00")) {
+ cascade_node = np;
+ break;
+ }
+
+ if (cascade_node == NULL) {
+ printk(KERN_WARNING "IMP3A: No FPGA PIC\n");
+ return;
+ }
+
+ gef_pic_init(cascade_node);
+ of_node_put(cascade_node);
+}
+
+#ifdef CONFIG_PCI
+static int primary_phb_addr;
+#endif /* CONFIG_PCI */
+
+/*
+ * Setup the architecture
+ */
+static void __init ge_imp3a_setup_arch(void)
+{
+ struct device_node *regs;
+#ifdef CONFIG_PCI
+ struct device_node *np;
+ struct pci_controller *hose;
+#endif
+ dma_addr_t max = 0xffffffff;
+
+ if (ppc_md.progress)
+ ppc_md.progress("ge_imp3a_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+ for_each_node_by_type(np, "pci") {
+ if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
+ of_device_is_compatible(np, "fsl,mpc8548-pcie") ||
+ of_device_is_compatible(np, "fsl,p2020-pcie")) {
+ struct resource rsrc;
+ of_address_to_resource(np, 0, &rsrc);
+ if ((rsrc.start & 0xfffff) == primary_phb_addr)
+ fsl_add_bridge(np, 1);
+ else
+ fsl_add_bridge(np, 0);
+
+ hose = pci_find_hose_for_OF_device(np);
+ max = min(max, hose->dma_window_base_cur +
+ hose->dma_window_size);
+ }
+ }
+#endif
+
+ mpc85xx_smp_init();
+
+#ifdef CONFIG_SWIOTLB
+ if (memblock_end_of_DRAM() > max) {
+ ppc_swiotlb_enable = 1;
+ set_pci_dma_ops(&swiotlb_dma_ops);
+ ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
+ }
+#endif
+
+ /* Remap basic board registers */
+ regs = of_find_compatible_node(NULL, NULL, "ge,imp3a-fpga-regs");
+ if (regs) {
+ imp3a_regs = of_iomap(regs, 0);
+ if (imp3a_regs == NULL)
+ printk(KERN_WARNING "Unable to map board registers\n");
+ of_node_put(regs);
+ }
+
+#if defined(CONFIG_MMIO_NVRAM)
+ mmio_nvram_init();
+#endif
+
+ printk(KERN_INFO "GE Intelligent Platforms IMP3A 3U cPCI SBC\n");
+}
+
+/* Return the PCB revision */
+static unsigned int ge_imp3a_get_pcb_rev(void)
+{
+ unsigned int reg;
+
+ reg = ioread16(imp3a_regs);
+ return (reg >> 8) & 0xff;
+}
+
+/* Return the board (software) revision */
+static unsigned int ge_imp3a_get_board_rev(void)
+{
+ unsigned int reg;
+
+ reg = ioread16(imp3a_regs + 0x2);
+ return reg & 0xff;
+}
+
+/* Return the FPGA revision */
+static unsigned int ge_imp3a_get_fpga_rev(void)
+{
+ unsigned int reg;
+
+ reg = ioread16(imp3a_regs + 0x2);
+ return (reg >> 8) & 0xff;
+}
+
+/* Return compactPCI Geographical Address */
+static unsigned int ge_imp3a_get_cpci_geo_addr(void)
+{
+ unsigned int reg;
+
+ reg = ioread16(imp3a_regs + 0x6);
+ return (reg & 0x0f00) >> 8;
+}
+
+/* Return compactPCI System Controller Status */
+static unsigned int ge_imp3a_get_cpci_is_syscon(void)
+{
+ unsigned int reg;
+
+ reg = ioread16(imp3a_regs + 0x6);
+ return reg & (1 << 12);
+}
+
+static void ge_imp3a_show_cpuinfo(struct seq_file *m)
+{
+ seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n");
+
+ seq_printf(m, "Revision\t: %u%c\n", ge_imp3a_get_pcb_rev(),
+ ('A' + ge_imp3a_get_board_rev() - 1));
+
+ seq_printf(m, "FPGA Revision\t: %u\n", ge_imp3a_get_fpga_rev());
+
+ seq_printf(m, "cPCI geo. addr\t: %u\n", ge_imp3a_get_cpci_geo_addr());
+
+ seq_printf(m, "cPCI syscon\t: %s\n",
+ ge_imp3a_get_cpci_is_syscon() ? "yes" : "no");
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init ge_imp3a_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (of_flat_dt_is_compatible(root, "ge,IMP3A")) {
+#ifdef CONFIG_PCI
+ primary_phb_addr = 0x9000;
+#endif
+ return 1;
+ }
+
+ return 0;
+}
+
+machine_device_initcall(ge_imp3a, mpc85xx_common_publish_devices);
+
+machine_arch_initcall(ge_imp3a, swiotlb_setup_bus_notifier);
+
+define_machine(ge_imp3a) {
+ .name = "GE_IMP3A",
+ .probe = ge_imp3a_probe,
+ .setup_arch = ge_imp3a_setup_arch,
+ .init_IRQ = ge_imp3a_pic_init,
+ .show_cpuinfo = ge_imp3a_show_cpuinfo,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index 02d97e31c18c..ab5f0bf19454 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -3,7 +3,7 @@
*
* Maintained by Kumar Gala (see MAINTAINERS for contact information)
*
- * Copyright 2005 Freescale Semiconductor Inc.
+ * Copyright 2005, 2011-2012 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -48,17 +48,24 @@
#include "mpc85xx.h"
-/* CADMUS info */
-/* xxx - galak, move into device tree */
-#define CADMUS_BASE (0xf8004000)
-#define CADMUS_SIZE (256)
-#define CM_VER (0)
-#define CM_CSR (1)
-#define CM_RST (2)
-
+/*
+ * The CDS board contains an FPGA/CPLD called "Cadmus", which collects
+ * various logic and performs system control functions.
+ * Here is the FPGA/CPLD register map.
+ */
+struct cadmus_reg {
+ u8 cm_ver; /* Board version */
+ u8 cm_csr; /* General control/status */
+ u8 cm_rst; /* Reset control */
+ u8 cm_hsclk; /* High speed clock */
+ u8 cm_hsxclk; /* High speed clock extended */
+ u8 cm_led; /* LED data */
+ u8 cm_pci; /* PCI control/status */
+ u8 cm_dma; /* DMA control */
+ u8 res[248]; /* Total 256 bytes */
+};
-static int cds_pci_slot = 2;
-static volatile u8 *cadmus;
+static struct cadmus_reg *cadmus;
#ifdef CONFIG_PCI
@@ -158,6 +165,33 @@ DECLARE_PCI_FIXUP_EARLY(0x1957, 0x3fff, skip_fake_bridge);
DECLARE_PCI_FIXUP_EARLY(0x3fff, 0x1957, skip_fake_bridge);
DECLARE_PCI_FIXUP_EARLY(0xff3f, 0x5719, skip_fake_bridge);
+#define PCI_DEVICE_ID_IDT_TSI310 0x01a7
+
+/*
+ * Fix Tsi310 PCI-X bridge resource.
+ * Force the bridge to open a window from 0x0000-0x1fff in PCI I/O space.
+ * This allows legacy I/O(i8259, etc) on the VIA southbridge to be accessed.
+ */
+void mpc85xx_cds_fixup_bus(struct pci_bus *bus)
+{
+ struct pci_dev *dev = bus->self;
+ struct resource *res = bus->resource[0];
+
+ if (dev != NULL &&
+ dev->vendor == PCI_VENDOR_ID_IBM &&
+ dev->device == PCI_DEVICE_ID_IDT_TSI310) {
+ if (res) {
+ res->start = 0;
+ res->end = 0x1fff;
+ res->flags = IORESOURCE_IO;
+ pr_info("mpc85xx_cds: PCI bridge resource fixup applied\n");
+ pr_info("mpc85xx_cds: %pR\n", res);
+ }
+ }
+
+ fsl_pcibios_fixup_bus(bus);
+}
+
#ifdef CONFIG_PPC_I8259
static void mpc85xx_8259_cascade_handler(unsigned int irq,
struct irq_desc *desc)
@@ -248,20 +282,30 @@ machine_device_initcall(mpc85xx_cds, mpc85xx_cds_8259_attach);
*/
static void __init mpc85xx_cds_setup_arch(void)
{
-#ifdef CONFIG_PCI
struct device_node *np;
-#endif
+ int cds_pci_slot;
if (ppc_md.progress)
ppc_md.progress("mpc85xx_cds_setup_arch()", 0);
- cadmus = ioremap(CADMUS_BASE, CADMUS_SIZE);
- cds_pci_slot = ((cadmus[CM_CSR] >> 6) & 0x3) + 1;
+ np = of_find_compatible_node(NULL, NULL, "fsl,mpc8548cds-fpga");
+ if (!np) {
+ pr_err("Could not find FPGA node.\n");
+ return;
+ }
+
+ cadmus = of_iomap(np, 0);
+ of_node_put(np);
+ if (!cadmus) {
+ pr_err("Fail to map FPGA area.\n");
+ return;
+ }
if (ppc_md.progress) {
char buf[40];
+ cds_pci_slot = ((in_8(&cadmus->cm_csr) >> 6) & 0x3) + 1;
snprintf(buf, 40, "CDS Version = 0x%x in slot %d\n",
- cadmus[CM_VER], cds_pci_slot);
+ in_8(&cadmus->cm_ver), cds_pci_slot);
ppc_md.progress(buf, 0);
}
@@ -291,7 +335,8 @@ static void mpc85xx_cds_show_cpuinfo(struct seq_file *m)
svid = mfspr(SPRN_SVR);
seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
- seq_printf(m, "Machine\t\t: MPC85xx CDS (0x%x)\n", cadmus[CM_VER]);
+ seq_printf(m, "Machine\t\t: MPC85xx CDS (0x%x)\n",
+ in_8(&cadmus->cm_ver));
seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
seq_printf(m, "SVR\t\t: 0x%x\n", svid);
@@ -322,7 +367,7 @@ define_machine(mpc85xx_cds) {
.get_irq = mpic_get_irq,
#ifdef CONFIG_PCI
.restart = mpc85xx_cds_restart,
- .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+ .pcibios_fixup_bus = mpc85xx_cds_fixup_bus,
#else
.restart = fsl_rstcr_restart,
#endif
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 57aceb5d273e..f33662b46b8d 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -1,5 +1,6 @@
/*
- * Copyright (C) Freescale Semicondutor, Inc. 2006-2010. All rights reserved.
+ * Copyright (C) 2006-2010, 2012 Freescale Semicondutor, Inc.
+ * All rights reserved.
*
* Author: Andy Fleming <afleming@freescale.com>
*
@@ -51,6 +52,7 @@
#include <asm/qe_ic.h>
#include <asm/mpic.h>
#include <asm/swiotlb.h>
+#include <asm/fsl_guts.h>
#include "smp.h"
#include "mpc85xx.h"
@@ -268,34 +270,27 @@ static void __init mpc85xx_mds_qe_init(void)
mpc85xx_mds_reset_ucc_phys();
if (machine_is(p1021_mds)) {
-#define MPC85xx_PMUXCR_OFFSET 0x60
-#define MPC85xx_PMUXCR_QE0 0x00008000
-#define MPC85xx_PMUXCR_QE3 0x00001000
-#define MPC85xx_PMUXCR_QE9 0x00000040
-#define MPC85xx_PMUXCR_QE12 0x00000008
- static __be32 __iomem *pmuxcr;
- np = of_find_node_by_name(NULL, "global-utilities");
+ struct ccsr_guts_85xx __iomem *guts;
+ np = of_find_node_by_name(NULL, "global-utilities");
if (np) {
- pmuxcr = of_iomap(np, 0) + MPC85xx_PMUXCR_OFFSET;
-
- if (!pmuxcr)
- printk(KERN_EMERG "Error: Alternate function"
- " signal multiplex control register not"
- " mapped!\n");
- else
+ guts = of_iomap(np, 0);
+ if (!guts)
+ pr_err("mpc85xx-rdb: could not map global utilities register\n");
+ else{
/* P1021 has pins muxed for QE and other functions. To
* enable QE UEC mode, we need to set bit QE0 for UCC1
* in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9
* and QE12 for QE MII management signals in PMUXCR
* register.
*/
- setbits32(pmuxcr, MPC85xx_PMUXCR_QE0 |
- MPC85xx_PMUXCR_QE3 |
- MPC85xx_PMUXCR_QE9 |
- MPC85xx_PMUXCR_QE12);
-
+ setbits32(&guts->pmuxcr, MPC85xx_PMUXCR_QE(0) |
+ MPC85xx_PMUXCR_QE(3) |
+ MPC85xx_PMUXCR_QE(9) |
+ MPC85xx_PMUXCR_QE(12));
+ iounmap(guts);
+ }
of_node_put(np);
}
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
index 407c7391e360..db214cd4c822 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -1,7 +1,7 @@
/*
* MPC85xx RDB Board Setup
*
- * Copyright 2009 Freescale Semiconductor Inc.
+ * Copyright 2009,2012 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -26,6 +26,9 @@
#include <asm/prom.h>
#include <asm/udbg.h>
#include <asm/mpic.h>
+#include <asm/qe.h>
+#include <asm/qe_ic.h>
+#include <asm/fsl_guts.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
@@ -47,6 +50,10 @@ void __init mpc85xx_rdb_pic_init(void)
struct mpic *mpic;
unsigned long root = of_get_flat_dt_root();
+#ifdef CONFIG_QUICC_ENGINE
+ struct device_node *np;
+#endif
+
if (of_flat_dt_is_compatible(root, "fsl,MPC85XXRDB-CAMP")) {
mpic = mpic_alloc(NULL, 0, MPIC_NO_RESET |
MPIC_BIG_ENDIAN |
@@ -61,6 +68,18 @@ void __init mpc85xx_rdb_pic_init(void)
BUG_ON(mpic == NULL);
mpic_init(mpic);
+
+#ifdef CONFIG_QUICC_ENGINE
+ np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
+ if (np) {
+ qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
+ qe_ic_cascade_high_mpic);
+ of_node_put(np);
+
+ } else
+ pr_err("%s: Could not find qe-ic node\n", __func__);
+#endif
+
}
/*
@@ -68,7 +87,7 @@ void __init mpc85xx_rdb_pic_init(void)
*/
static void __init mpc85xx_rdb_setup_arch(void)
{
-#ifdef CONFIG_PCI
+#if defined(CONFIG_PCI) || defined(CONFIG_QUICC_ENGINE)
struct device_node *np;
#endif
@@ -84,11 +103,73 @@ static void __init mpc85xx_rdb_setup_arch(void)
#endif
mpc85xx_smp_init();
+
+#ifdef CONFIG_QUICC_ENGINE
+ np = of_find_compatible_node(NULL, NULL, "fsl,qe");
+ if (!np) {
+ pr_err("%s: Could not find Quicc Engine node\n", __func__);
+ goto qe_fail;
+ }
+
+ qe_reset();
+ of_node_put(np);
+
+ np = of_find_node_by_name(NULL, "par_io");
+ if (np) {
+ struct device_node *ucc;
+
+ par_io_init(np);
+ of_node_put(np);
+
+ for_each_node_by_name(ucc, "ucc")
+ par_io_of_config(ucc);
+
+ }
+#if defined(CONFIG_UCC_GETH) || defined(CONFIG_SERIAL_QE)
+ if (machine_is(p1025_rdb)) {
+
+ struct ccsr_guts_85xx __iomem *guts;
+
+ np = of_find_node_by_name(NULL, "global-utilities");
+ if (np) {
+ guts = of_iomap(np, 0);
+ if (!guts) {
+
+ pr_err("mpc85xx-rdb: could not map global utilities register\n");
+
+ } else {
+ /* P1025 has pins muxed for QE and other functions. To
+ * enable QE UEC mode, we need to set bit QE0 for UCC1
+ * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9
+ * and QE12 for QE MII management singals in PMUXCR
+ * register.
+ */
+ setbits32(&guts->pmuxcr, MPC85xx_PMUXCR_QE(0) |
+ MPC85xx_PMUXCR_QE(3) |
+ MPC85xx_PMUXCR_QE(9) |
+ MPC85xx_PMUXCR_QE(12));
+ iounmap(guts);
+ }
+ of_node_put(np);
+ }
+
+ }
+#endif
+
+qe_fail:
+#endif /* CONFIG_QUICC_ENGINE */
+
printk(KERN_INFO "MPC85xx RDB board from Freescale Semiconductor\n");
}
machine_device_initcall(p2020_rdb, mpc85xx_common_publish_devices);
+machine_device_initcall(p2020_rdb_pc, mpc85xx_common_publish_devices);
+machine_device_initcall(p1020_mbg_pc, mpc85xx_common_publish_devices);
machine_device_initcall(p1020_rdb, mpc85xx_common_publish_devices);
+machine_device_initcall(p1020_rdb_pc, mpc85xx_common_publish_devices);
+machine_device_initcall(p1020_utm_pc, mpc85xx_common_publish_devices);
+machine_device_initcall(p1021_rdb_pc, mpc85xx_common_publish_devices);
+machine_device_initcall(p1025_rdb, mpc85xx_common_publish_devices);
/*
* Called very early, device-tree isn't unflattened
@@ -111,6 +192,52 @@ static int __init p1020_rdb_probe(void)
return 0;
}
+static int __init p1020_rdb_pc_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "fsl,P1020RDB-PC");
+}
+
+static int __init p1021_rdb_pc_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (of_flat_dt_is_compatible(root, "fsl,P1021RDB-PC"))
+ return 1;
+ return 0;
+}
+
+static int __init p2020_rdb_pc_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (of_flat_dt_is_compatible(root, "fsl,P2020RDB-PC"))
+ return 1;
+ return 0;
+}
+
+static int __init p1025_rdb_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "fsl,P1025RDB");
+}
+
+static int __init p1020_mbg_pc_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "fsl,P1020MBG-PC");
+}
+
+static int __init p1020_utm_pc_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "fsl,P1020UTM-PC");
+}
+
define_machine(p2020_rdb) {
.name = "P2020 RDB",
.probe = p2020_rdb_probe,
@@ -138,3 +265,87 @@ define_machine(p1020_rdb) {
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};
+
+define_machine(p1021_rdb_pc) {
+ .name = "P1021 RDB-PC",
+ .probe = p1021_rdb_pc_probe,
+ .setup_arch = mpc85xx_rdb_setup_arch,
+ .init_IRQ = mpc85xx_rdb_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
+
+define_machine(p2020_rdb_pc) {
+ .name = "P2020RDB-PC",
+ .probe = p2020_rdb_pc_probe,
+ .setup_arch = mpc85xx_rdb_setup_arch,
+ .init_IRQ = mpc85xx_rdb_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
+
+define_machine(p1025_rdb) {
+ .name = "P1025 RDB",
+ .probe = p1025_rdb_probe,
+ .setup_arch = mpc85xx_rdb_setup_arch,
+ .init_IRQ = mpc85xx_rdb_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
+
+define_machine(p1020_mbg_pc) {
+ .name = "P1020 MBG-PC",
+ .probe = p1020_mbg_pc_probe,
+ .setup_arch = mpc85xx_rdb_setup_arch,
+ .init_IRQ = mpc85xx_rdb_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
+
+define_machine(p1020_utm_pc) {
+ .name = "P1020 UTM-PC",
+ .probe = p1020_utm_pc_probe,
+ .setup_arch = mpc85xx_rdb_setup_arch,
+ .init_IRQ = mpc85xx_rdb_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
+
+define_machine(p1020_rdb_pc) {
+ .name = "P1020RDB-PC",
+ .probe = p1020_rdb_pc_probe,
+ .setup_arch = mpc85xx_rdb_setup_arch,
+ .init_IRQ = mpc85xx_rdb_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c
index 63ba79053960..0fe88e39945e 100644
--- a/arch/powerpc/platforms/85xx/p1022_ds.c
+++ b/arch/powerpc/platforms/85xx/p1022_ds.c
@@ -33,6 +33,10 @@
#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
+#define PMUXCR_ELBCDIU_MASK 0xc0000000
+#define PMUXCR_ELBCDIU_NOR16 0x80000000
+#define PMUXCR_ELBCDIU_DIU 0x40000000
+
/*
* Board-specific initialization of the DIU. This code should probably be
* executed when the DIU is opened, rather than in arch code, but the DIU
@@ -50,11 +54,22 @@
#define CLKDVDR_PXCLK_MASK 0x00FF0000
/* Some ngPIXIS register definitions */
+#define PX_CTL 3
+#define PX_BRDCFG0 8
+#define PX_BRDCFG1 9
+
+#define PX_BRDCFG0_ELBC_SPI_MASK 0xc0
+#define PX_BRDCFG0_ELBC_SPI_ELBC 0x00
+#define PX_BRDCFG0_ELBC_SPI_NULL 0xc0
+#define PX_BRDCFG0_ELBC_DIU 0x02
+
#define PX_BRDCFG1_DVIEN 0x80
#define PX_BRDCFG1_DFPEN 0x40
#define PX_BRDCFG1_BACKLIGHT 0x20
#define PX_BRDCFG1_DDCEN 0x10
+#define PX_CTL_ALTACC 0x80
+
/*
* DIU Area Descriptor
*
@@ -133,44 +148,117 @@ static void p1022ds_set_gamma_table(enum fsl_diu_monitor_port port,
*/
static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port)
{
- struct device_node *np;
- void __iomem *pixis;
- u8 __iomem *brdcfg1;
-
- np = of_find_compatible_node(NULL, NULL, "fsl,p1022ds-fpga");
- if (!np)
- /* older device trees used "fsl,p1022ds-pixis" */
- np = of_find_compatible_node(NULL, NULL, "fsl,p1022ds-pixis");
- if (!np) {
- pr_err("p1022ds: missing ngPIXIS node\n");
+ struct device_node *guts_node;
+ struct device_node *indirect_node = NULL;
+ struct ccsr_guts_85xx __iomem *guts;
+ u8 __iomem *lbc_lcs0_ba = NULL;
+ u8 __iomem *lbc_lcs1_ba = NULL;
+ u8 b;
+
+ /* Map the global utilities registers. */
+ guts_node = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts");
+ if (!guts_node) {
+ pr_err("p1022ds: missing global utilties device node\n");
return;
}
- pixis = of_iomap(np, 0);
- if (!pixis) {
- pr_err("p1022ds: could not map ngPIXIS registers\n");
- return;
+ guts = of_iomap(guts_node, 0);
+ if (!guts) {
+ pr_err("p1022ds: could not map global utilties device\n");
+ goto exit;
}
- brdcfg1 = pixis + 9; /* BRDCFG1 is at offset 9 in the ngPIXIS */
+
+ indirect_node = of_find_compatible_node(NULL, NULL,
+ "fsl,p1022ds-indirect-pixis");
+ if (!indirect_node) {
+ pr_err("p1022ds: missing pixis indirect mode node\n");
+ goto exit;
+ }
+
+ lbc_lcs0_ba = of_iomap(indirect_node, 0);
+ if (!lbc_lcs0_ba) {
+ pr_err("p1022ds: could not map localbus chip select 0\n");
+ goto exit;
+ }
+
+ lbc_lcs1_ba = of_iomap(indirect_node, 1);
+ if (!lbc_lcs1_ba) {
+ pr_err("p1022ds: could not map localbus chip select 1\n");
+ goto exit;
+ }
+
+ /* Make sure we're in indirect mode first. */
+ if ((in_be32(&guts->pmuxcr) & PMUXCR_ELBCDIU_MASK) !=
+ PMUXCR_ELBCDIU_DIU) {
+ struct device_node *pixis_node;
+ void __iomem *pixis;
+
+ pixis_node =
+ of_find_compatible_node(NULL, NULL, "fsl,p1022ds-fpga");
+ if (!pixis_node) {
+ pr_err("p1022ds: missing pixis node\n");
+ goto exit;
+ }
+
+ pixis = of_iomap(pixis_node, 0);
+ of_node_put(pixis_node);
+ if (!pixis) {
+ pr_err("p1022ds: could not map pixis registers\n");
+ goto exit;
+ }
+
+ /* Enable indirect PIXIS mode. */
+ setbits8(pixis + PX_CTL, PX_CTL_ALTACC);
+ iounmap(pixis);
+
+ /* Switch the board mux to the DIU */
+ out_8(lbc_lcs0_ba, PX_BRDCFG0); /* BRDCFG0 */
+ b = in_8(lbc_lcs1_ba);
+ b |= PX_BRDCFG0_ELBC_DIU;
+ out_8(lbc_lcs1_ba, b);
+
+ /* Set the chip mux to DIU mode. */
+ clrsetbits_be32(&guts->pmuxcr, PMUXCR_ELBCDIU_MASK,
+ PMUXCR_ELBCDIU_DIU);
+ in_be32(&guts->pmuxcr);
+ }
+
switch (port) {
case FSL_DIU_PORT_DVI:
- printk(KERN_INFO "%s:%u\n", __func__, __LINE__);
/* Enable the DVI port, disable the DFP and the backlight */
- clrsetbits_8(brdcfg1, PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT,
- PX_BRDCFG1_DVIEN);
+ out_8(lbc_lcs0_ba, PX_BRDCFG1);
+ b = in_8(lbc_lcs1_ba);
+ b &= ~(PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT);
+ b |= PX_BRDCFG1_DVIEN;
+ out_8(lbc_lcs1_ba, b);
break;
case FSL_DIU_PORT_LVDS:
- printk(KERN_INFO "%s:%u\n", __func__, __LINE__);
+ /*
+ * LVDS also needs backlight enabled, otherwise the display
+ * will be blank.
+ */
/* Enable the DFP port, disable the DVI and the backlight */
- clrsetbits_8(brdcfg1, PX_BRDCFG1_DVIEN | PX_BRDCFG1_BACKLIGHT,
- PX_BRDCFG1_DFPEN);
+ out_8(lbc_lcs0_ba, PX_BRDCFG1);
+ b = in_8(lbc_lcs1_ba);
+ b &= ~PX_BRDCFG1_DVIEN;
+ b |= PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT;
+ out_8(lbc_lcs1_ba, b);
break;
default:
pr_err("p1022ds: unsupported monitor port %i\n", port);
}
- iounmap(pixis);
+exit:
+ if (lbc_lcs1_ba)
+ iounmap(lbc_lcs1_ba);
+ if (lbc_lcs0_ba)
+ iounmap(lbc_lcs0_ba);
+ if (guts)
+ iounmap(guts);
+
+ of_node_put(indirect_node);
+ of_node_put(guts_node);
}
/**
@@ -249,6 +337,49 @@ void __init p1022_ds_pic_init(void)
mpic_init(mpic);
}
+#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
+
+/*
+ * Disables a node in the device tree.
+ *
+ * This function is called before kmalloc() is available, so the 'new' object
+ * should be allocated in the global area. The easiest way is to do that is
+ * to allocate one static local variable for each call to this function.
+ */
+static void __init disable_one_node(struct device_node *np, struct property *new)
+{
+ struct property *old;
+
+ old = of_find_property(np, new->name, NULL);
+ if (old)
+ prom_update_property(np, new, old);
+ else
+ prom_add_property(np, new);
+}
+
+/* TRUE if there is a "video=fslfb" command-line parameter. */
+static bool fslfb;
+
+/*
+ * Search for a "video=fslfb" command-line parameter, and set 'fslfb' to
+ * true if we find it.
+ *
+ * We need to use early_param() instead of __setup() because the normal
+ * __setup() gets called to late. However, early_param() gets called very
+ * early, before the device tree is unflattened, so all we can do now is set a
+ * global variable. Later on, p1022_ds_setup_arch() will use that variable
+ * to determine if we need to update the device tree.
+ */
+static int __init early_video_setup(char *options)
+{
+ fslfb = (strncmp(options, "fslfb:", 6) == 0);
+
+ return 0;
+}
+early_param("video", early_video_setup);
+
+#endif
+
/*
* Setup the architecture
*/
@@ -286,6 +417,34 @@ static void __init p1022_ds_setup_arch(void)
diu_ops.set_monitor_port = p1022ds_set_monitor_port;
diu_ops.set_pixel_clock = p1022ds_set_pixel_clock;
diu_ops.valid_monitor_port = p1022ds_valid_monitor_port;
+
+ /*
+ * Disable the NOR flash node if there is video=fslfb... command-line
+ * parameter. When the DIU is active, NOR flash is unavailable, so we
+ * have to disable the node before the MTD driver loads.
+ */
+ if (fslfb) {
+ struct device_node *np =
+ of_find_compatible_node(NULL, NULL, "fsl,p1022-elbc");
+
+ if (np) {
+ np = of_find_compatible_node(np, NULL, "cfi-flash");
+ if (np) {
+ static struct property nor_status = {
+ .name = "status",
+ .value = "disabled",
+ .length = sizeof("disabled"),
+ };
+
+ pr_info("p1022ds: disabling %s node",
+ np->full_name);
+ disable_one_node(np, &nor_status);
+ of_node_put(np);
+ }
+ }
+
+ }
+
#endif
mpc85xx_smp_init();
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 8d6599d54ea6..7a6279e38213 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -39,6 +39,7 @@ config GEF_PPC9A
select MMIO_NVRAM
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
+ select GE_FPGA
help
This option enables support for the GE PPC9A.
@@ -48,6 +49,7 @@ config GEF_SBC310
select MMIO_NVRAM
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
+ select GE_FPGA
help
This option enables support for the GE SBC310.
@@ -57,6 +59,7 @@ config GEF_SBC610
select MMIO_NVRAM
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
+ select GE_FPGA
select HAS_RAPIDIO
help
This option enables support for the GE SBC610.
diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile
index 4b0d7b1aa005..ede815d6489d 100644
--- a/arch/powerpc/platforms/86xx/Makefile
+++ b/arch/powerpc/platforms/86xx/Makefile
@@ -7,7 +7,6 @@ obj-$(CONFIG_SMP) += mpc86xx_smp.o
obj-$(CONFIG_MPC8641_HPCN) += mpc86xx_hpcn.o
obj-$(CONFIG_SBC8641D) += sbc8641d.o
obj-$(CONFIG_MPC8610_HPCD) += mpc8610_hpcd.o
-gef-gpio-$(CONFIG_GPIOLIB) += gef_gpio.o
-obj-$(CONFIG_GEF_SBC610) += gef_sbc610.o gef_pic.o $(gef-gpio-y)
-obj-$(CONFIG_GEF_SBC310) += gef_sbc310.o gef_pic.o $(gef-gpio-y)
-obj-$(CONFIG_GEF_PPC9A) += gef_ppc9a.o gef_pic.o $(gef-gpio-y)
+obj-$(CONFIG_GEF_SBC610) += gef_sbc610.o
+obj-$(CONFIG_GEF_SBC310) += gef_sbc310.o
+obj-$(CONFIG_GEF_PPC9A) += gef_ppc9a.o
diff --git a/arch/powerpc/platforms/86xx/gef_gpio.c b/arch/powerpc/platforms/86xx/gef_gpio.c
deleted file mode 100644
index 2a703365e664..000000000000
--- a/arch/powerpc/platforms/86xx/gef_gpio.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Driver for GE FPGA based GPIO
- *
- * Author: Martyn Welch <martyn.welch@ge.com>
- *
- * 2008 (c) GE Intelligent Platforms Embedded Systems, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/* TODO
- *
- * Configuration of output modes (totem-pole/open-drain)
- * Interrupt configuration - interrupts are always generated the FPGA relies on
- * the I/O interrupt controllers mask to stop them propergating
- */
-
-#include <linux/kernel.h>
-#include <linux/compiler.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/of_platform.h>
-#include <linux/of_gpio.h>
-#include <linux/gpio.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-
-#define GEF_GPIO_DIRECT 0x00
-#define GEF_GPIO_IN 0x04
-#define GEF_GPIO_OUT 0x08
-#define GEF_GPIO_TRIG 0x0C
-#define GEF_GPIO_POLAR_A 0x10
-#define GEF_GPIO_POLAR_B 0x14
-#define GEF_GPIO_INT_STAT 0x18
-#define GEF_GPIO_OVERRUN 0x1C
-#define GEF_GPIO_MODE 0x20
-
-static void _gef_gpio_set(void __iomem *reg, unsigned int offset, int value)
-{
- unsigned int data;
-
- data = ioread32be(reg);
- /* value: 0=low; 1=high */
- if (value & 0x1)
- data = data | (0x1 << offset);
- else
- data = data & ~(0x1 << offset);
-
- iowrite32be(data, reg);
-}
-
-
-static int gef_gpio_dir_in(struct gpio_chip *chip, unsigned offset)
-{
- unsigned int data;
- struct of_mm_gpio_chip *mmchip = to_of_mm_gpio_chip(chip);
-
- data = ioread32be(mmchip->regs + GEF_GPIO_DIRECT);
- data = data | (0x1 << offset);
- iowrite32be(data, mmchip->regs + GEF_GPIO_DIRECT);
-
- return 0;
-}
-
-static int gef_gpio_dir_out(struct gpio_chip *chip, unsigned offset, int value)
-{
- unsigned int data;
- struct of_mm_gpio_chip *mmchip = to_of_mm_gpio_chip(chip);
-
- /* Set direction before switching to input */
- _gef_gpio_set(mmchip->regs + GEF_GPIO_OUT, offset, value);
-
- data = ioread32be(mmchip->regs + GEF_GPIO_DIRECT);
- data = data & ~(0x1 << offset);
- iowrite32be(data, mmchip->regs + GEF_GPIO_DIRECT);
-
- return 0;
-}
-
-static int gef_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
- unsigned int data;
- int state = 0;
- struct of_mm_gpio_chip *mmchip = to_of_mm_gpio_chip(chip);
-
- data = ioread32be(mmchip->regs + GEF_GPIO_IN);
- state = (int)((data >> offset) & 0x1);
-
- return state;
-}
-
-static void gef_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
- struct of_mm_gpio_chip *mmchip = to_of_mm_gpio_chip(chip);
-
- _gef_gpio_set(mmchip->regs + GEF_GPIO_OUT, offset, value);
-}
-
-static int __init gef_gpio_init(void)
-{
- struct device_node *np;
- int retval;
- struct of_mm_gpio_chip *gef_gpio_chip;
-
- for_each_compatible_node(np, NULL, "gef,sbc610-gpio") {
-
- pr_debug("%s: Initialising GEF GPIO\n", np->full_name);
-
- /* Allocate chip structure */
- gef_gpio_chip = kzalloc(sizeof(*gef_gpio_chip), GFP_KERNEL);
- if (!gef_gpio_chip) {
- pr_err("%s: Unable to allocate structure\n",
- np->full_name);
- continue;
- }
-
- /* Setup pointers to chip functions */
- gef_gpio_chip->gc.of_gpio_n_cells = 2;
- gef_gpio_chip->gc.ngpio = 19;
- gef_gpio_chip->gc.direction_input = gef_gpio_dir_in;
- gef_gpio_chip->gc.direction_output = gef_gpio_dir_out;
- gef_gpio_chip->gc.get = gef_gpio_get;
- gef_gpio_chip->gc.set = gef_gpio_set;
-
- /* This function adds a memory mapped GPIO chip */
- retval = of_mm_gpiochip_add(np, gef_gpio_chip);
- if (retval) {
- kfree(gef_gpio_chip);
- pr_err("%s: Unable to add GPIO\n", np->full_name);
- }
- }
-
- for_each_compatible_node(np, NULL, "gef,sbc310-gpio") {
-
- pr_debug("%s: Initialising GEF GPIO\n", np->full_name);
-
- /* Allocate chip structure */
- gef_gpio_chip = kzalloc(sizeof(*gef_gpio_chip), GFP_KERNEL);
- if (!gef_gpio_chip) {
- pr_err("%s: Unable to allocate structure\n",
- np->full_name);
- continue;
- }
-
- /* Setup pointers to chip functions */
- gef_gpio_chip->gc.of_gpio_n_cells = 2;
- gef_gpio_chip->gc.ngpio = 6;
- gef_gpio_chip->gc.direction_input = gef_gpio_dir_in;
- gef_gpio_chip->gc.direction_output = gef_gpio_dir_out;
- gef_gpio_chip->gc.get = gef_gpio_get;
- gef_gpio_chip->gc.set = gef_gpio_set;
-
- /* This function adds a memory mapped GPIO chip */
- retval = of_mm_gpiochip_add(np, gef_gpio_chip);
- if (retval) {
- kfree(gef_gpio_chip);
- pr_err("%s: Unable to add GPIO\n", np->full_name);
- }
- }
-
- return 0;
-};
-arch_initcall(gef_gpio_init);
-
-MODULE_DESCRIPTION("GE I/O FPGA GPIO driver");
-MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com");
-MODULE_LICENSE("GPL");
diff --git a/arch/powerpc/platforms/86xx/gef_pic.c b/arch/powerpc/platforms/86xx/gef_pic.c
deleted file mode 100644
index 94594e58594c..000000000000
--- a/arch/powerpc/platforms/86xx/gef_pic.c
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * Interrupt handling for GE FPGA based PIC
- *
- * Author: Martyn Welch <martyn.welch@ge.com>
- *
- * 2008 (c) GE Intelligent Platforms Embedded Systems, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/irq.h>
-
-#include "gef_pic.h"
-
-#define DEBUG
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(fmt...) do { printk(KERN_DEBUG "gef_pic: " fmt); } while (0)
-#else
-#define DBG(fmt...) do { } while (0)
-#endif
-
-#define GEF_PIC_NUM_IRQS 32
-
-/* Interrupt Controller Interface Registers */
-#define GEF_PIC_INTR_STATUS 0x0000
-
-#define GEF_PIC_INTR_MASK(cpu) (0x0010 + (0x4 * cpu))
-#define GEF_PIC_CPU0_INTR_MASK GEF_PIC_INTR_MASK(0)
-#define GEF_PIC_CPU1_INTR_MASK GEF_PIC_INTR_MASK(1)
-
-#define GEF_PIC_MCP_MASK(cpu) (0x0018 + (0x4 * cpu))
-#define GEF_PIC_CPU0_MCP_MASK GEF_PIC_MCP_MASK(0)
-#define GEF_PIC_CPU1_MCP_MASK GEF_PIC_MCP_MASK(1)
-
-
-static DEFINE_RAW_SPINLOCK(gef_pic_lock);
-
-static void __iomem *gef_pic_irq_reg_base;
-static struct irq_host *gef_pic_irq_host;
-static int gef_pic_cascade_irq;
-
-/*
- * Interrupt Controller Handling
- *
- * The interrupt controller handles interrupts for most on board interrupts,
- * apart from PCI interrupts. For example on SBC610:
- *
- * 17:31 RO Reserved
- * 16 RO PCI Express Doorbell 3 Status
- * 15 RO PCI Express Doorbell 2 Status
- * 14 RO PCI Express Doorbell 1 Status
- * 13 RO PCI Express Doorbell 0 Status
- * 12 RO Real Time Clock Interrupt Status
- * 11 RO Temperature Interrupt Status
- * 10 RO Temperature Critical Interrupt Status
- * 9 RO Ethernet PHY1 Interrupt Status
- * 8 RO Ethernet PHY3 Interrupt Status
- * 7 RO PEX8548 Interrupt Status
- * 6 RO Reserved
- * 5 RO Watchdog 0 Interrupt Status
- * 4 RO Watchdog 1 Interrupt Status
- * 3 RO AXIS Message FIFO A Interrupt Status
- * 2 RO AXIS Message FIFO B Interrupt Status
- * 1 RO AXIS Message FIFO C Interrupt Status
- * 0 RO AXIS Message FIFO D Interrupt Status
- *
- * Interrupts can be forwarded to one of two output lines. Nothing
- * clever is done, so if the masks are incorrectly set, a single input
- * interrupt could generate interrupts on both output lines!
- *
- * The dual lines are there to allow the chained interrupts to be easily
- * passed into two different cores. We currently do not use this functionality
- * in this driver.
- *
- * Controller can also be configured to generate Machine checks (MCP), again on
- * two lines, to be attached to two different cores. It is suggested that these
- * should be masked out.
- */
-
-void gef_pic_cascade(unsigned int irq, struct irq_desc *desc)
-{
- struct irq_chip *chip = irq_desc_get_chip(desc);
- unsigned int cascade_irq;
-
- /*
- * See if we actually have an interrupt, call generic handling code if
- * we do.
- */
- cascade_irq = gef_pic_get_irq();
-
- if (cascade_irq != NO_IRQ)
- generic_handle_irq(cascade_irq);
-
- chip->irq_eoi(&desc->irq_data);
-}
-
-static void gef_pic_mask(struct irq_data *d)
-{
- unsigned long flags;
- unsigned int hwirq = irqd_to_hwirq(d);
- u32 mask;
-
- raw_spin_lock_irqsave(&gef_pic_lock, flags);
- mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
- mask &= ~(1 << hwirq);
- out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask);
- raw_spin_unlock_irqrestore(&gef_pic_lock, flags);
-}
-
-static void gef_pic_mask_ack(struct irq_data *d)
-{
- /* Don't think we actually have to do anything to ack an interrupt,
- * we just need to clear down the devices interrupt and it will go away
- */
- gef_pic_mask(d);
-}
-
-static void gef_pic_unmask(struct irq_data *d)
-{
- unsigned long flags;
- unsigned int hwirq = irqd_to_hwirq(d);
- u32 mask;
-
- raw_spin_lock_irqsave(&gef_pic_lock, flags);
- mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
- mask |= (1 << hwirq);
- out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask);
- raw_spin_unlock_irqrestore(&gef_pic_lock, flags);
-}
-
-static struct irq_chip gef_pic_chip = {
- .name = "gefp",
- .irq_mask = gef_pic_mask,
- .irq_mask_ack = gef_pic_mask_ack,
- .irq_unmask = gef_pic_unmask,
-};
-
-
-/* When an interrupt is being configured, this call allows some flexibilty
- * in deciding which irq_chip structure is used
- */
-static int gef_pic_host_map(struct irq_host *h, unsigned int virq,
- irq_hw_number_t hwirq)
-{
- /* All interrupts are LEVEL sensitive */
- irq_set_status_flags(virq, IRQ_LEVEL);
- irq_set_chip_and_handler(virq, &gef_pic_chip, handle_level_irq);
-
- return 0;
-}
-
-static int gef_pic_host_xlate(struct irq_host *h, struct device_node *ct,
- const u32 *intspec, unsigned int intsize,
- irq_hw_number_t *out_hwirq, unsigned int *out_flags)
-{
-
- *out_hwirq = intspec[0];
- if (intsize > 1)
- *out_flags = intspec[1];
- else
- *out_flags = IRQ_TYPE_LEVEL_HIGH;
-
- return 0;
-}
-
-static struct irq_host_ops gef_pic_host_ops = {
- .map = gef_pic_host_map,
- .xlate = gef_pic_host_xlate,
-};
-
-
-/*
- * Initialisation of PIC, this should be called in BSP
- */
-void __init gef_pic_init(struct device_node *np)
-{
- unsigned long flags;
-
- /* Map the devices registers into memory */
- gef_pic_irq_reg_base = of_iomap(np, 0);
-
- raw_spin_lock_irqsave(&gef_pic_lock, flags);
-
- /* Initialise everything as masked. */
- out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_INTR_MASK, 0);
- out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU1_INTR_MASK, 0);
-
- out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_MCP_MASK, 0);
- out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU1_MCP_MASK, 0);
-
- raw_spin_unlock_irqrestore(&gef_pic_lock, flags);
-
- /* Map controller */
- gef_pic_cascade_irq = irq_of_parse_and_map(np, 0);
- if (gef_pic_cascade_irq == NO_IRQ) {
- printk(KERN_ERR "SBC610: failed to map cascade interrupt");
- return;
- }
-
- /* Setup an irq_host structure */
- gef_pic_irq_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR,
- GEF_PIC_NUM_IRQS,
- &gef_pic_host_ops, NO_IRQ);
- if (gef_pic_irq_host == NULL)
- return;
-
- /* Chain with parent controller */
- irq_set_chained_handler(gef_pic_cascade_irq, gef_pic_cascade);
-}
-
-/*
- * This is called when we receive an interrupt with apparently comes from this
- * chip - check, returning the highest interrupt generated or return NO_IRQ
- */
-unsigned int gef_pic_get_irq(void)
-{
- u32 cause, mask, active;
- unsigned int virq = NO_IRQ;
- int hwirq;
-
- cause = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_STATUS);
-
- mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
-
- active = cause & mask;
-
- if (active) {
- for (hwirq = GEF_PIC_NUM_IRQS - 1; hwirq > -1; hwirq--) {
- if (active & (0x1 << hwirq))
- break;
- }
- virq = irq_linear_revmap(gef_pic_irq_host,
- (irq_hw_number_t)hwirq);
- }
-
- return virq;
-}
-
diff --git a/arch/powerpc/platforms/86xx/gef_pic.h b/arch/powerpc/platforms/86xx/gef_pic.h
deleted file mode 100644
index 6149916da3f4..000000000000
--- a/arch/powerpc/platforms/86xx/gef_pic.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __GEF_PIC_H__
-#define __GEF_PIC_H__
-
-#include <linux/init.h>
-
-void gef_pic_cascade(unsigned int, struct irq_desc *);
-unsigned int gef_pic_get_irq(void);
-void gef_pic_init(struct device_node *);
-
-#endif /* __GEF_PIC_H__ */
-
diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c
index 60ce07e39100..ed58b6cfd60c 100644
--- a/arch/powerpc/platforms/86xx/gef_ppc9a.c
+++ b/arch/powerpc/platforms/86xx/gef_ppc9a.c
@@ -37,9 +37,9 @@
#include <sysdev/fsl_pci.h>
#include <sysdev/fsl_soc.h>
+#include <sysdev/ge/ge_pic.h>
#include "mpc86xx.h"
-#include "gef_pic.h"
#undef DEBUG
diff --git a/arch/powerpc/platforms/86xx/gef_sbc310.c b/arch/powerpc/platforms/86xx/gef_sbc310.c
index 3ecee25bf3ed..710db69bd523 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc310.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc310.c
@@ -37,9 +37,9 @@
#include <sysdev/fsl_pci.h>
#include <sysdev/fsl_soc.h>
+#include <sysdev/ge/ge_pic.h>
#include "mpc86xx.h"
-#include "gef_pic.h"
#undef DEBUG
diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c
index 5090d608d9ee..4a13d2f4ac20 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc610.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc610.c
@@ -37,9 +37,9 @@
#include <sysdev/fsl_pci.h>
#include <sysdev/fsl_soc.h>
+#include <sysdev/ge/ge_pic.h>
#include "mpc86xx.h"
-#include "gef_pic.h"
#undef DEBUG
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 236ab67bc3a4..a35ca44ade66 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -86,6 +86,14 @@ config MPIC_WEIRD
bool
default n
+config MPIC_MSGR
+ bool "MPIC message register support"
+ depends on MPIC
+ default n
+ help
+ Enables support for the MPIC message registers. These
+ registers are used for inter-processor communication.
+
config PPC_I8259
bool
default n