diff options
Diffstat (limited to 'arch/powerpc/sysdev')
| -rw-r--r-- | arch/powerpc/sysdev/ppc4xx_pci.c | 220 | ||||
| -rw-r--r-- | arch/powerpc/sysdev/ppc4xx_pci.h | 2 |
2 files changed, 133 insertions, 89 deletions
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c index b986eff09f6b..0538980ef89c 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.c +++ b/arch/powerpc/sysdev/ppc4xx_pci.c @@ -16,6 +16,8 @@ * */ +#undef DEBUG + #include <linux/kernel.h> #include <linux/pci.h> #include <linux/init.h> @@ -531,10 +533,13 @@ struct ppc4xx_pciex_port struct device_node *node; unsigned int index; int endpoint; + int link; + int has_ibpre; unsigned int sdr_base; dcr_host_t dcrs; struct resource cfg_space; struct resource utl_regs; + void __iomem *utl_base; }; static struct ppc4xx_pciex_port *ppc4xx_pciex_ports; @@ -706,29 +711,44 @@ static int ppc440spe_pciex_init_port_hw(struct ppc4xx_pciex_port *port) return 0; } -static int ppc440speA_pciex_init_utl(struct ppc4xx_pciex_port *port) +static int ppc440speA_pciex_init_port_hw(struct ppc4xx_pciex_port *port) +{ + return ppc440spe_pciex_init_port_hw(port); +} + +static int ppc440speB_pciex_init_port_hw(struct ppc4xx_pciex_port *port) { - void __iomem *utl_base; + int rc = ppc440spe_pciex_init_port_hw(port); + + port->has_ibpre = 1; + + return rc; +} +static int ppc440speA_pciex_init_utl(struct ppc4xx_pciex_port *port) +{ /* XXX Check what that value means... I hate magic */ dcr_write(port->dcrs, DCRO_PEGPL_SPECIAL, 0x68782800); - utl_base = ioremap(port->utl_regs.start, 0x100); - BUG_ON(utl_base == NULL); - /* * Set buffer allocations and then assert VRB and TXE. */ - out_be32(utl_base + PEUTL_OUTTR, 0x08000000); - out_be32(utl_base + PEUTL_INTR, 0x02000000); - out_be32(utl_base + PEUTL_OPDBSZ, 0x10000000); - out_be32(utl_base + PEUTL_PBBSZ, 0x53000000); - out_be32(utl_base + PEUTL_IPHBSZ, 0x08000000); - out_be32(utl_base + PEUTL_IPDBSZ, 0x10000000); - out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000); - out_be32(utl_base + PEUTL_PCTL, 0x80800066); + out_be32(port->utl_base + PEUTL_OUTTR, 0x08000000); + out_be32(port->utl_base + PEUTL_INTR, 0x02000000); + out_be32(port->utl_base + PEUTL_OPDBSZ, 0x10000000); + out_be32(port->utl_base + PEUTL_PBBSZ, 0x53000000); + out_be32(port->utl_base + PEUTL_IPHBSZ, 0x08000000); + out_be32(port->utl_base + PEUTL_IPDBSZ, 0x10000000); + out_be32(port->utl_base + PEUTL_RCIRQEN, 0x00f00000); + out_be32(port->utl_base + PEUTL_PCTL, 0x80800066); - iounmap(utl_base); + return 0; +} + +static int ppc440speB_pciex_init_utl(struct ppc4xx_pciex_port *port) +{ + /* Report CRS to the operating system */ + out_be32(port->utl_base + PEUTL_PBCTL, 0x08000000); return 0; } @@ -736,14 +756,15 @@ static int ppc440speA_pciex_init_utl(struct ppc4xx_pciex_port *port) static struct ppc4xx_pciex_hwops ppc440speA_pcie_hwops __initdata = { .core_init = ppc440spe_pciex_core_init, - .port_init_hw = ppc440spe_pciex_init_port_hw, + .port_init_hw = ppc440speA_pciex_init_port_hw, .setup_utl = ppc440speA_pciex_init_utl, }; static struct ppc4xx_pciex_hwops ppc440speB_pcie_hwops __initdata = { .core_init = ppc440spe_pciex_core_init, - .port_init_hw = ppc440spe_pciex_init_port_hw, + .port_init_hw = ppc440speB_pciex_init_port_hw, + .setup_utl = ppc440speB_pciex_init_utl, }; @@ -821,30 +842,21 @@ static int ppc405ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port) static int ppc405ex_pciex_init_utl(struct ppc4xx_pciex_port *port) { - void __iomem *utl_base; - dcr_write(port->dcrs, DCRO_PEGPL_SPECIAL, 0x0); - utl_base = ioremap(port->utl_regs.start, 0x100); - BUG_ON(utl_base == NULL); - /* * Set buffer allocations and then assert VRB and TXE. */ - out_be32(utl_base + PEUTL_OUTTR, 0x02000000); - out_be32(utl_base + PEUTL_INTR, 0x02000000); - out_be32(utl_base + PEUTL_OPDBSZ, 0x04000000); - out_be32(utl_base + PEUTL_PBBSZ, 0x21000000); - out_be32(utl_base + PEUTL_IPHBSZ, 0x02000000); - out_be32(utl_base + PEUTL_IPDBSZ, 0x04000000); - out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000); - out_be32(utl_base + PEUTL_PCTL, 0x80800066); + out_be32(port->utl_base + PEUTL_OUTTR, 0x02000000); + out_be32(port->utl_base + PEUTL_INTR, 0x02000000); + out_be32(port->utl_base + PEUTL_OPDBSZ, 0x04000000); + out_be32(port->utl_base + PEUTL_PBBSZ, 0x21000000); + out_be32(port->utl_base + PEUTL_IPHBSZ, 0x02000000); + out_be32(port->utl_base + PEUTL_IPDBSZ, 0x04000000); + out_be32(port->utl_base + PEUTL_RCIRQEN, 0x00f00000); + out_be32(port->utl_base + PEUTL_PCTL, 0x80800066); - out_be32(utl_base + PEUTL_PBCTL, 0x0800000c); - out_be32(utl_base + PEUTL_RCSTA, - in_be32(utl_base + PEUTL_RCSTA) | 0x000040000); - - iounmap(utl_base); + out_be32(port->utl_base + PEUTL_PBCTL, 0x08000000); return 0; } @@ -926,17 +938,29 @@ static void __init ppc4xx_pciex_port_init_mapping(struct ppc4xx_pciex_port *port dcr_write(port->dcrs, DCRO_PEGPL_MSGMSK, 0); } -static int __init ppc4xx_pciex_port_init(struct ppc4xx_pciex_port *port) +static int __init ppc4xx_pciex_wait_on_sdr(struct ppc4xx_pciex_port *port, + unsigned int sdr_offset, + unsigned int mask, + unsigned int value, + int timeout_ms) { - int attempts, rc = 0; u32 val; - /* Check if it's endpoint or root complex - * - * XXX Do we want to use the device-tree instead ? --BenH. - */ - val = mfdcri(SDR0, port->sdr_base + PESDRn_DLPSET); - port->endpoint = (((val >> 20) & 0xf) != PTYPE_ROOT_PORT); + while(timeout_ms--) { + val = mfdcri(SDR0, port->sdr_base + sdr_offset); + if ((val & mask) == value) { + pr_debug("PCIE%d: Wait on SDR %x success with tm %d (%08x)\n", + port->index, sdr_offset, timeout_ms, val); + return 0; + } + msleep(1); + } + return -1; +} + +static int __init ppc4xx_pciex_port_init(struct ppc4xx_pciex_port *port) +{ + int rc = 0; /* Init HW */ if (ppc4xx_pciex_hwops->port_init_hw) @@ -944,44 +968,40 @@ static int __init ppc4xx_pciex_port_init(struct ppc4xx_pciex_port *port) if (rc != 0) return rc; - /* - * Notice: the following delay has critical impact on device - * initialization - if too short (<50ms) the link doesn't get up. - * - * XXX FIXME: There are various issues with that link up thingy, - * we could just wait for the link with a timeout but Stefan says - * some cards need more time even after the link is up. I'll - * investigate. For now, we keep a fixed 1s delay. - * - * Ultimately, it should be made asynchronous so all ports are - * brought up simultaneously though. - */ - printk(KERN_INFO "PCIE%d: Waiting for link to go up...\n", + printk(KERN_INFO "PCIE%d: Checking link...\n", port->index); - msleep(1000); - /* - * Check that we exited the reset state properly - */ - val = mfdcri(SDR0, port->sdr_base + PESDRn_RCSSTS); - if (val & (1 << 20)) { - printk(KERN_WARNING "PCIE%d: PGRST failed %08x\n", - port->index, val); + /* Wait for reset to complete */ + if (ppc4xx_pciex_wait_on_sdr(port, PESDRn_RCSSTS, 1 << 20, 0, 10)) { + printk(KERN_WARNING "PCIE%d: PGRST failed\n", + port->index); return -1; } - /* - * Verify link is up + /* Check for card presence detect if supported, if not, just wait for + * link unconditionally. + * + * note that we don't fail if there is no link, we just filter out + * config space accesses. That way, it will be easier to implement + * hotplug later on. */ - val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP); - if (!(val & 0x00001000)) { - printk(KERN_INFO "PCIE%d: link is not up !\n", + if (!port->has_ibpre || + !ppc4xx_pciex_wait_on_sdr(port, PESDRn_LOOP, + 1 << 28, 1 << 28, 100)) { + printk(KERN_INFO + "PCIE%d: Device detected, waiting for link...\n", port->index); - return -1; - } - - printk(KERN_INFO "PCIE%d: link is up !\n", - port->index); + if (ppc4xx_pciex_wait_on_sdr(port, PESDRn_LOOP, + 0x1000, 0x1000, 2000)) + printk(KERN_WARNING + "PCIE%d: Link up failed\n", port->index); + else { + printk(KERN_INFO + "PCIE%d: link is up !\n", port->index); + port->link = 1; + } + } else + printk(KERN_INFO "PCIE%d: No device detected.\n", port->index); /* * Initialize mapping: disable all regions and configure @@ -990,12 +1010,13 @@ static int __init ppc4xx_pciex_port_init(struct ppc4xx_pciex_port *port) ppc4xx_pciex_port_init_mapping(port); /* - * Setup UTL registers - but only on revA! - * We use default settings for revB chip. - * - * To be reworked. We may also be able to move that to - * before the link wait - * --BenH. + * Map UTL + */ + port->utl_base = ioremap(port->utl_regs.start, 0x100); + BUG_ON(port->utl_base == NULL); + + /* + * Setup UTL registers --BenH. */ if (ppc4xx_pciex_hwops->setup_utl) ppc4xx_pciex_hwops->setup_utl(port); @@ -1003,15 +1024,13 @@ static int __init ppc4xx_pciex_port_init(struct ppc4xx_pciex_port *port) /* * Check for VC0 active and assert RDY. */ - attempts = 10; - while (!(mfdcri(SDR0, port->sdr_base + PESDRn_RCSSTS) & (1 << 16))) { - if (!(attempts--)) { - printk(KERN_INFO "PCIE%d: VC0 not active\n", - port->index); - return -1; - } - msleep(1000); + if (port->link && + ppc4xx_pciex_wait_on_sdr(port, PESDRn_RCSSTS, + 1 << 16, 1 << 16, 5000)) { + printk(KERN_INFO "PCIE%d: VC0 not active\n", port->index); + port->link = 0; } + mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) | 1 << 20); msleep(100); @@ -1048,6 +1067,10 @@ static int ppc4xx_pciex_validate_bdf(struct ppc4xx_pciex_port *port, PCI_SLOT(devfn) != 0) return PCIBIOS_DEVICE_NOT_FOUND; + /* Check if we have a link */ + if ((bus->number != port->hose->first_busno) && !port->link) + return PCIBIOS_DEVICE_NOT_FOUND; + return 0; } @@ -1092,6 +1115,9 @@ static int ppc4xx_pciex_read_config(struct pci_bus *bus, unsigned int devfn, gpl_cfg = dcr_read(port->dcrs, DCRO_PEGPL_CFG); dcr_write(port->dcrs, DCRO_PEGPL_CFG, gpl_cfg | GPL_DMER_MASK_DISA); + /* Make sure no CRS is recorded */ + out_be32(port->utl_base + PEUTL_RCSTA, 0x00040000); + switch (len) { case 1: *val = in_8((u8 *)(addr + offset)); @@ -1109,6 +1135,14 @@ static int ppc4xx_pciex_read_config(struct pci_bus *bus, unsigned int devfn, bus->number, hose->first_busno, hose->last_busno, devfn, offset, len, addr + offset, *val); + /* Check for CRS (440SPe rev B does that for us but heh ..) */ + if (in_be32(port->utl_base + PEUTL_RCSTA) & 0x00040000) { + pr_debug("Got CRS !\n"); + if (len != 4 || offset != 0) + return PCIBIOS_DEVICE_NOT_FOUND; + *val = 0xffff0001; + } + dcr_write(port->dcrs, DCRO_PEGPL_CFG, gpl_cfg); return PCIBIOS_SUCCESSFUL; @@ -1278,8 +1312,11 @@ static void __init ppc4xx_pciex_port_setup_hose(struct ppc4xx_pciex_port *port) void __iomem *mbase = NULL, *cfg_data = NULL; /* XXX FIXME: Handle endpoint mode properly */ - if (port->endpoint) + if (port->endpoint) { + printk(KERN_WARNING "PCIE%d: Port in endpoint mode !\n", + port->index); return; + } /* Check if primary bridge */ if (of_get_property(port->node, "primary", NULL)) @@ -1424,6 +1461,9 @@ static void __init ppc4xx_probe_pciex_bridge(struct device_node *np) } port->sdr_base = *pval; + /* XXX Currently, we only support root complex mode */ + port->endpoint = 0; + /* Fetch config space registers address */ if (of_address_to_resource(np, 0, &port->cfg_space)) { printk(KERN_ERR "%s: Can't get PCI-E config space !", @@ -1447,8 +1487,10 @@ static void __init ppc4xx_probe_pciex_bridge(struct device_node *np) port->dcrs = dcr_map(np, dcrs, dcr_resource_len(np, 0)); /* Initialize the port specific registers */ - if (ppc4xx_pciex_port_init(port)) + if (ppc4xx_pciex_port_init(port)) { + printk(KERN_WARNING "PCIE%d: Port init failed\n", port->index); return; + } /* Setup the linux hose data structure */ ppc4xx_pciex_port_setup_hose(port); diff --git a/arch/powerpc/sysdev/ppc4xx_pci.h b/arch/powerpc/sysdev/ppc4xx_pci.h index 43e51ce5c477..1c07908dc6ef 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.h +++ b/arch/powerpc/sysdev/ppc4xx_pci.h @@ -330,6 +330,8 @@ /* * Config space register offsets */ +#define PECFG_ECRTCTL 0x074 + #define PECFG_BAR0LMPA 0x210 #define PECFG_BAR0HMPA 0x214 #define PECFG_BAR1MPA 0x218 |