diff options
Diffstat (limited to 'arch/powerpc')
50 files changed, 2501 insertions, 739 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 2643dbc3f289..abb325eb8f75 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -504,7 +504,7 @@ config CPU_FREQ_PMAC config CPU_FREQ_PMAC64 bool "Support for some Apple G5s" - depends on CPU_FREQ && PMAC_SMU && PPC64 + depends on CPU_FREQ && PPC64 select CPU_FREQ_TABLE help This adds support for frequency switching on Apple iMac G5, @@ -836,9 +836,10 @@ config MCA bool config PCI - bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) \ - || MPC7448HPC2 - default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx && !PPC_85xx && !PPC_86xx + bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx \ + || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) || MPC7448HPC2 + default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx \ + && !PPC_85xx && !PPC_86xx default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS default PCI_QSPAN if !4xx && !CPM2 && 8xx help diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts new file mode 100644 index 000000000000..5f41c1f7a5f3 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -0,0 +1,257 @@ +/* + * MPC8540 ADS Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "MPC8540ADS"; + compatible = "MPC85xxADS"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,8540@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // 166 MHz + clock-frequency = <0>; // 825 MHz, from uboot + 32-bit; + linux,phandle = <201>; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 08000000>; // 128M at 0x0 + }; + + soc8540@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = <e0000000 00100000>; // CCSRBAR 1M + bus-frequency = <0>; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <1b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + linux,phandle = <24520>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <40000>; + interrupts = <35 1>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <40000>; + interrupts = <35 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + ethernet-phy@3 { + linux,phandle = <2452003>; + interrupt-parent = <40000>; + interrupts = <37 1>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + address = [ 00 E0 0C 00 73 00 ]; + local-mac-address = [ 00 E0 0C 00 73 00 ]; + interrupts = <d 2 e 2 12 2>; + interrupt-parent = <40000>; + phy-handle = <2452000>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + address = [ 00 E0 0C 00 73 01 ]; + local-mac-address = [ 00 E0 0C 00 73 01 ]; + interrupts = <13 2 14 2 18 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + + ethernet@26000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "FEC"; + compatible = "gianfar"; + reg = <26000 1000>; + address = [ 00 E0 0C 00 73 02 ]; + local-mac-address = [ 00 E0 0C 00 73 02 ]; + interrupts = <19 2>; + interrupt-parent = <40000>; + phy-handle = <2452003>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + pci@8000 { + linux,phandle = <8000>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x02 */ + 1000 0 0 1 40000 31 1 + 1000 0 0 2 40000 32 1 + 1000 0 0 3 40000 33 1 + 1000 0 0 4 40000 34 1 + + /* IDSEL 0x03 */ + 1800 0 0 1 40000 34 1 + 1800 0 0 2 40000 31 1 + 1800 0 0 3 40000 32 1 + 1800 0 0 4 40000 33 1 + + /* IDSEL 0x04 */ + 2000 0 0 1 40000 33 1 + 2000 0 0 2 40000 34 1 + 2000 0 0 3 40000 31 1 + 2000 0 0 4 40000 32 1 + + /* IDSEL 0x05 */ + 2800 0 0 1 40000 32 1 + 2800 0 0 2 40000 33 1 + 2800 0 0 3 40000 34 1 + 2800 0 0 4 40000 31 1 + + /* IDSEL 0x0c */ + 6000 0 0 1 40000 31 1 + 6000 0 0 2 40000 32 1 + 6000 0 0 3 40000 33 1 + 6000 0 0 4 40000 34 1 + + /* IDSEL 0x0d */ + 6800 0 0 1 40000 34 1 + 6800 0 0 2 40000 31 1 + 6800 0 0 3 40000 32 1 + 6800 0 0 4 40000 33 1 + + /* IDSEL 0x0e */ + 7000 0 0 1 40000 33 1 + 7000 0 0 2 40000 34 1 + 7000 0 0 3 40000 31 1 + 7000 0 0 4 40000 32 1 + + /* IDSEL 0x0f */ + 7800 0 0 1 40000 32 1 + 7800 0 0 2 40000 33 1 + 7800 0 0 3 40000 34 1 + 7800 0 0 4 40000 31 1 + + /* IDSEL 0x12 */ + 9000 0 0 1 40000 31 1 + 9000 0 0 2 40000 32 1 + 9000 0 0 3 40000 33 1 + 9000 0 0 4 40000 34 1 + + /* IDSEL 0x13 */ + 9800 0 0 1 40000 34 1 + 9800 0 0 2 40000 31 1 + 9800 0 0 3 40000 32 1 + 9800 0 0 4 40000 33 1 + + /* IDSEL 0x14 */ + a000 0 0 1 40000 33 1 + a000 0 0 2 40000 34 1 + a000 0 0 3 40000 31 1 + a000 0 0 4 40000 32 1 + + /* IDSEL 0x15 */ + a800 0 0 1 40000 32 1 + a800 0 0 2 40000 33 1 + a800 0 0 3 40000 34 1 + a800 0 0 4 40000 31 1>; + interrupt-parent = <40000>; + interrupts = <08 2>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8000 1000>; + compatible = "85xx"; + device_type = "pci"; + }; + + pic@40000 { + linux,phandle = <40000>; + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + built-in; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts new file mode 100644 index 000000000000..7be0bc659e1c --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -0,0 +1,244 @@ +/* + * MPC8541 CDS Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "MPC8541CDS"; + compatible = "MPC85xxCDS"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,8541@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // 166 MHz + clock-frequency = <0>; // 825 MHz, from uboot + 32-bit; + linux,phandle = <201>; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 08000000>; // 128M at 0x0 + }; + + soc8541@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = <e0000000 00100000>; // CCSRBAR 1M + bus-frequency = <0>; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <1b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + linux,phandle = <24520>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + local-mac-address = [ 00 E0 0C 00 73 00 ]; + interrupts = <d 2 e 2 12 2>; + interrupt-parent = <40000>; + phy-handle = <2452000>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + local-mac-address = [ 00 E0 0C 00 73 01 ]; + interrupts = <13 2 14 2 18 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + pci@8000 { + linux,phandle = <8000>; + interrupt-map-mask = <1f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x10 */ + 08000 0 0 1 40000 30 1 + 08000 0 0 2 40000 31 1 + 08000 0 0 3 40000 32 1 + 08000 0 0 4 40000 33 1 + + /* IDSEL 0x11 */ + 08800 0 0 1 40000 30 1 + 08800 0 0 2 40000 31 1 + 08800 0 0 3 40000 32 1 + 08800 0 0 4 40000 33 1 + + /* IDSEL 0x12 (Slot 1) */ + 09000 0 0 1 40000 30 1 + 09000 0 0 2 40000 31 1 + 09000 0 0 3 40000 32 1 + 09000 0 0 4 40000 33 1 + + /* IDSEL 0x13 (Slot 2) */ + 09800 0 0 1 40000 31 1 + 09800 0 0 2 40000 32 1 + 09800 0 0 3 40000 33 1 + 09800 0 0 4 40000 30 1 + + /* IDSEL 0x14 (Slot 3) */ + 0a000 0 0 1 40000 32 1 + 0a000 0 0 2 40000 33 1 + 0a000 0 0 3 40000 30 1 + 0a000 0 0 4 40000 31 1 + + /* IDSEL 0x15 (Slot 4) */ + 0a800 0 0 1 40000 33 1 + 0a800 0 0 2 40000 30 1 + 0a800 0 0 3 40000 31 1 + 0a800 0 0 4 40000 32 1 + + /* Bus 1 (Tundra Bridge) */ + /* IDSEL 0x12 (ISA bridge) */ + 19000 0 0 1 40000 30 1 + 19000 0 0 2 40000 31 1 + 19000 0 0 3 40000 32 1 + 19000 0 0 4 40000 33 1>; + interrupt-parent = <40000>; + interrupts = <08 2>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8000 1000>; + compatible = "85xx"; + device_type = "pci"; + + i8259@19000 { + clock-frequency = <0>; + interrupt-controller; + device_type = "interrupt-controller"; + reg = <19000 0 0 0 1>; + #address-cells = <0>; + #interrupt-cells = <2>; + built-in; + compatible = "chrp,iic"; + big-endian; + interrupts = <1>; + interrupt-parent = <8000>; + }; + }; + + pci@9000 { + linux,phandle = <9000>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x15 */ + a800 0 0 1 40000 3b 1 + a800 0 0 2 40000 3b 1 + a800 0 0 3 40000 3b 1 + a800 0 0 4 40000 3b 1>; + interrupt-parent = <40000>; + interrupts = <09 2>; + bus-range = <0 0>; + ranges = <02000000 0 a0000000 a0000000 0 20000000 + 01000000 0 00000000 e3000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <9000 1000>; + compatible = "85xx"; + device_type = "pci"; + }; + + pic@40000 { + linux,phandle = <40000>; + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + built-in; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts new file mode 100644 index 000000000000..893d7957c174 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -0,0 +1,287 @@ +/* + * MPC8555 CDS Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "MPC8548CDS"; + compatible = "MPC85xxCDS"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,8548@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // 166 MHz + clock-frequency = <0>; // 825 MHz, from uboot + 32-bit; + linux,phandle = <201>; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 08000000>; // 128M at 0x0 + }; + + soc8548@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = <e0000000 00100000>; // CCSRBAR 1M + bus-frequency = <0>; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <1b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + linux,phandle = <24520>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <1>; + device_type = "ethernet-phy"; + }; + + ethernet-phy@2 { + linux,phandle = <2452002>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <2>; + device_type = "ethernet-phy"; + }; + ethernet-phy@3 { + linux,phandle = <2452003>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + local-mac-address = [ 00 E0 0C 00 73 00 ]; + interrupts = <d 2 e 2 12 2>; + interrupt-parent = <40000>; + phy-handle = <2452000>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + local-mac-address = [ 00 E0 0C 00 73 01 ]; + interrupts = <13 2 14 2 18 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + + ethernet@26000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <26000 1000>; + local-mac-address = [ 00 E0 0C 00 73 02 ]; + interrupts = <f 2 10 2 11 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + +/* eTSEC 4 is currently broken + ethernet@27000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <27000 1000>; + local-mac-address = [ 00 E0 0C 00 73 03 ]; + interrupts = <15 2 16 2 17 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + */ + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + pci@8000 { + linux,phandle = <8000>; + interrupt-map-mask = <1f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x10 */ + 08000 0 0 1 40000 30 1 + 08000 0 0 2 40000 31 1 + 08000 0 0 3 40000 32 1 + 08000 0 0 4 40000 33 1 + + /* IDSEL 0x11 */ + 08800 0 0 1 40000 30 1 + 08800 0 0 2 40000 31 1 + 08800 0 0 3 40000 32 1 + 08800 0 0 4 40000 33 1 + + /* IDSEL 0x12 (Slot 1) */ + 09000 0 0 1 40000 30 1 + 09000 0 0 2 40000 31 1 + 09000 0 0 3 40000 32 1 + 09000 0 0 4 40000 33 1 + + /* IDSEL 0x13 (Slot 2) */ + 09800 0 0 1 40000 31 1 + 09800 0 0 2 40000 32 1 + 09800 0 0 3 40000 33 1 + 09800 0 0 4 40000 30 1 + + /* IDSEL 0x14 (Slot 3) */ + 0a000 0 0 1 40000 32 1 + 0a000 0 0 2 40000 33 1 + 0a000 0 0 3 40000 30 1 + 0a000 0 0 4 40000 31 1 + + /* IDSEL 0x15 (Slot 4) */ + 0a800 0 0 1 40000 33 1 + 0a800 0 0 2 40000 30 1 + 0a800 0 0 3 40000 31 1 + 0a800 0 0 4 40000 32 1 + + /* Bus 1 (Tundra Bridge) */ + /* IDSEL 0x12 (ISA bridge) */ + 19000 0 0 1 40000 30 1 + 19000 0 0 2 40000 31 1 + 19000 0 0 3 40000 32 1 + 19000 0 0 4 40000 33 1>; + interrupt-parent = <40000>; + interrupts = <08 2>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8000 1000>; + compatible = "85xx"; + device_type = "pci"; + + i8259@19000 { + clock-frequency = <0>; + interrupt-controller; + device_type = "interrupt-controller"; + reg = <19000 0 0 0 1>; + #address-cells = <0>; + #interrupt-cells = <2>; + built-in; + compatible = "chrp,iic"; + big-endian; + interrupts = <1>; + interrupt-parent = <8000>; + }; + }; + + pci@9000 { + linux,phandle = <9000>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x15 */ + a800 0 0 1 40000 3b 1 + a800 0 0 2 40000 3b 1 + a800 0 0 3 40000 3b 1 + a800 0 0 4 40000 3b 1>; + interrupt-parent = <40000>; + interrupts = <09 2>; + bus-range = <0 0>; + ranges = <02000000 0 a0000000 a0000000 0 20000000 + 01000000 0 00000000 e3000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <9000 1000>; + compatible = "85xx"; + device_type = "pci"; + }; + + pic@40000 { + linux,phandle = <40000>; + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + built-in; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts new file mode 100644 index 000000000000..118f5a887651 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -0,0 +1,244 @@ +/* + * MPC8555 CDS Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "MPC8555CDS"; + compatible = "MPC85xxCDS"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,8555@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // 166 MHz + clock-frequency = <0>; // 825 MHz, from uboot + 32-bit; + linux,phandle = <201>; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 08000000>; // 128M at 0x0 + }; + + soc8555@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = <e0000000 00100000>; // CCSRBAR 1M + bus-frequency = <0>; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <1b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + linux,phandle = <24520>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + local-mac-address = [ 00 E0 0C 00 73 00 ]; + interrupts = <0d 2 0e 2 12 2>; + interrupt-parent = <40000>; + phy-handle = <2452000>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + local-mac-address = [ 00 E0 0C 00 73 01 ]; + interrupts = <13 2 14 2 18 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + pci@8000 { + linux,phandle = <8000>; + interrupt-map-mask = <1f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x10 */ + 08000 0 0 1 40000 30 1 + 08000 0 0 2 40000 31 1 + 08000 0 0 3 40000 32 1 + 08000 0 0 4 40000 33 1 + + /* IDSEL 0x11 */ + 08800 0 0 1 40000 30 1 + 08800 0 0 2 40000 31 1 + 08800 0 0 3 40000 32 1 + 08800 0 0 4 40000 33 1 + + /* IDSEL 0x12 (Slot 1) */ + 09000 0 0 1 40000 30 1 + 09000 0 0 2 40000 31 1 + 09000 0 0 3 40000 32 1 + 09000 0 0 4 40000 33 1 + + /* IDSEL 0x13 (Slot 2) */ + 09800 0 0 1 40000 31 1 + 09800 0 0 2 40000 32 1 + 09800 0 0 3 40000 33 1 + 09800 0 0 4 40000 30 1 + + /* IDSEL 0x14 (Slot 3) */ + 0a000 0 0 1 40000 32 1 + 0a000 0 0 2 40000 33 1 + 0a000 0 0 3 40000 30 1 + 0a000 0 0 4 40000 31 1 + + /* IDSEL 0x15 (Slot 4) */ + 0a800 0 0 1 40000 33 1 + 0a800 0 0 2 40000 30 1 + 0a800 0 0 3 40000 31 1 + 0a800 0 0 4 40000 32 1 + + /* Bus 1 (Tundra Bridge) */ + /* IDSEL 0x12 (ISA bridge) */ + 19000 0 0 1 40000 30 1 + 19000 0 0 2 40000 31 1 + 19000 0 0 3 40000 32 1 + 19000 0 0 4 40000 33 1>; + interrupt-parent = <40000>; + interrupts = <08 2>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8000 1000>; + compatible = "85xx"; + device_type = "pci"; + + i8259@19000 { + clock-frequency = <0>; + interrupt-controller; + device_type = "interrupt-controller"; + reg = <19000 0 0 0 1>; + #address-cells = <0>; + #interrupt-cells = <2>; + built-in; + compatible = "chrp,iic"; + big-endian; + interrupts = <1>; + interrupt-parent = <8000>; + }; + }; + + pci@9000 { + linux,phandle = <9000>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x15 */ + a800 0 0 1 40000 3b 1 + a800 0 0 2 40000 3b 1 + a800 0 0 3 40000 3b 1 + a800 0 0 4 40000 3b 1>; + interrupt-parent = <40000>; + interrupts = <09 2>; + bus-range = <0 0>; + ranges = <02000000 0 a0000000 a0000000 0 20000000 + 01000000 0 00000000 e3000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <9000 1000>; + compatible = "85xx"; + device_type = "pci"; + }; + + pic@40000 { + linux,phandle = <40000>; + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + built-in; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts new file mode 100644 index 000000000000..f0c7731743ea --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -0,0 +1,339 @@ +/* + * MPC8641 HPCN Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "MPC8641HPCN"; + compatible = "mpc86xx"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #cpus = <2>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8641@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + 32-bit; + linux,boot-cpu; + }; + PowerPC,8641@1 { + device_type = "cpu"; + reg = <1>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + 32-bit; + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 40000000>; // 1G at 0x0 + }; + + soc8641@f8000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 f8000000 00100000>; + reg = <f8000000 00100000>; // CCSRBAR 1M + bus-frequency = <0>; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <2b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + i2c@3100 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3100 100>; + interrupts = <2b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + linux,phandle = <24520>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <40000>; + interrupts = <4a 1>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <40000>; + interrupts = <4a 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + ethernet-phy@2 { + linux,phandle = <2452002>; + interrupt-parent = <40000>; + interrupts = <4a 1>; + reg = <2>; + device_type = "ethernet-phy"; + }; + ethernet-phy@3 { + linux,phandle = <2452003>; + interrupt-parent = <40000>; + interrupts = <4a 1>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + mac-address = [ 00 E0 0C 00 73 00 ]; + interrupts = <1d 2 1e 2 22 2>; + interrupt-parent = <40000>; + phy-handle = <2452000>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + mac-address = [ 00 E0 0C 00 73 01 ]; + interrupts = <23 2 24 2 28 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + + ethernet@26000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <26000 1000>; + mac-address = [ 00 E0 0C 00 02 FD ]; + interrupts = <1F 2 20 2 21 2>; + interrupt-parent = <40000>; + phy-handle = <2452002>; + }; + + ethernet@27000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <27000 1000>; + mac-address = [ 00 E0 0C 00 03 FD ]; + interrupts = <25 2 26 2 27 2>; + interrupt-parent = <40000>; + phy-handle = <2452003>; + }; + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <0>; + interrupts = <2a 2>; + interrupt-parent = <40000>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <0>; + interrupts = <1c 2>; + interrupt-parent = <40000>; + }; + + pci@8000 { + compatible = "86xx"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8000 1000>; + bus-range = <0 fe>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <1fca055>; + interrupt-parent = <40000>; + interrupts = <18 2>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x11 */ + 8800 0 0 1 4d0 3 2 + 8800 0 0 2 4d0 4 2 + 8800 0 0 3 4d0 5 2 + 8800 0 0 4 4d0 6 2 + + /* IDSEL 0x12 */ + 9000 0 0 1 4d0 4 2 + 9000 0 0 2 4d0 5 2 + 9000 0 0 3 4d0 6 2 + 9000 0 0 4 4d0 3 2 + + /* IDSEL 0x13 */ + 9800 0 0 1 4d0 0 0 + 9800 0 0 2 4d0 0 0 + 9800 0 0 3 4d0 0 0 + 9800 0 0 4 4d0 0 0 + + /* IDSEL 0x14 */ + a000 0 0 1 4d0 0 0 + a000 0 0 2 4d0 0 0 + a000 0 0 3 4d0 0 0 + a000 0 0 4 4d0 0 0 + + /* IDSEL 0x15 */ + a800 0 0 1 4d0 0 0 + a800 0 0 2 4d0 0 0 + a800 0 0 3 4d0 0 0 + a800 0 0 4 4d0 0 0 + + /* IDSEL 0x16 */ + b000 0 0 1 4d0 0 0 + b000 0 0 2 4d0 0 0 + b000 0 0 3 4d0 0 0 + b000 0 0 4 4d0 0 0 + + /* IDSEL 0x17 */ + b800 0 0 1 4d0 0 0 + b800 0 0 2 4d0 0 0 + b800 0 0 3 4d0 0 0 + b800 0 0 4 4d0 0 0 + + /* IDSEL 0x18 */ + c000 0 0 1 4d0 0 0 + c000 0 0 2 4d0 0 0 + c000 0 0 3 4d0 0 0 + c000 0 0 4 4d0 0 0 + + /* IDSEL 0x19 */ + c800 0 0 1 4d0 0 0 + c800 0 0 2 4d0 0 0 + c800 0 0 3 4d0 0 0 + c800 0 0 4 4d0 0 0 + + /* IDSEL 0x1a */ + d000 0 0 1 4d0 6 2 + d000 0 0 2 4d0 3 2 + d000 0 0 3 4d0 4 2 + d000 0 0 4 4d0 5 2 + + + /* IDSEL 0x1b */ + d800 0 0 1 4d0 5 2 + d800 0 0 2 4d0 0 0 + d800 0 0 3 4d0 0 0 + d800 0 0 4 4d0 0 0 + + /* IDSEL 0x1c */ + e000 0 0 1 4d0 9 2 + e000 0 0 2 4d0 a 2 + e000 0 0 3 4d0 c 2 + e000 0 0 4 4d0 7 2 + + /* IDSEL 0x1d */ + e800 0 0 1 4d0 9 2 + e800 0 0 2 4d0 a 2 + e800 0 0 3 4d0 b 2 + e800 0 0 4 4d0 0 0 + + /* IDSEL 0x1e */ + f000 0 0 1 4d0 c 2 + f000 0 0 2 4d0 0 0 + f000 0 0 3 4d0 0 0 + f000 0 0 4 4d0 0 0 + + /* IDSEL 0x1f */ + f800 0 0 1 4d0 6 2 + f800 0 0 2 4d0 0 0 + f800 0 0 3 4d0 0 0 + f800 0 0 4 4d0 0 0 + >; + i8259@4d0 { + linux,phandle = <4d0>; + clock-frequency = <0>; + interrupt-controller; + device_type = "interrupt-controller"; + #address-cells = <0>; + #interrupt-cells = <2>; + built-in; + compatible = "chrp,iic"; + big-endian; + interrupts = <49 2>; + interrupt-parent = <40000>; + }; + + }; + pic@40000 { + linux,phandle = <40000>; + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + built-in; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + interrupts = < + 10 2 11 2 12 2 13 2 + 14 2 15 2 16 2 17 2 + 18 2 19 2 1a 2 1b 2 + 1c 2 1d 2 1e 2 1f 2 + 20 2 21 2 22 2 23 2 + 24 2 25 2 26 2 27 2 + 28 2 29 2 2a 2 2b 2 + 2c 2 2d 2 2e 2 2f 2 + 30 2 31 2 32 2 33 2 + 34 2 35 2 36 2 37 2 + 38 2 39 2 2a 2 3b 2 + 3c 2 3d 2 3e 2 3f 2 + 48 1 49 2 4a 1 + >; + interrupt-parent = <40000>; + }; + }; +}; diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index a45627547d03..8c6bd17c6929 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -1,16 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.17-rc1 -# Wed Apr 19 13:24:37 2006 +# Linux kernel version: 2.6.18-rc3 +# Tue Aug 8 09:12:29 2006 # CONFIG_PPC64=y CONFIG_64BIT=y CONFIG_PPC_MERGE=y CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y @@ -33,6 +35,7 @@ CONFIG_PPC_STD_MMU=y CONFIG_VIRT_CPU_ACCOUNTING=y CONFIG_SMP=y CONFIG_NR_CPUS=4 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options @@ -50,6 +53,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y @@ -67,10 +71,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -116,12 +122,16 @@ CONFIG_PPC_PMAC=y CONFIG_PPC_PMAC64=y # CONFIG_PPC_MAPLE is not set # CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_IBM_CELL_BLADE is not set +# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_U3_DART=y CONFIG_MPIC=y # CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set CONFIG_MPIC_BROKEN_U3=y # CONFIG_PPC_MPC106 is not set +CONFIG_PPC_970_NAP=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set @@ -153,6 +163,7 @@ CONFIG_BINFMT_ELF=y CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y # CONFIG_HOTPLUG_CPU is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y @@ -168,6 +179,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y # CONFIG_PPC_64K_PAGES is not set # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y @@ -184,6 +196,7 @@ CONFIG_GENERIC_ISA_DMA=y # CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set # CONFIG_PCI_DEBUG is not set # @@ -227,6 +240,8 @@ CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -239,6 +254,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -263,6 +279,7 @@ CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set # CONFIG_IP_NF_H323 is not set +# CONFIG_IP_NF_SIP is not set CONFIG_IP_NF_QUEUE=m # @@ -318,6 +335,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker @@ -355,6 +373,7 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 @@ -417,7 +436,6 @@ CONFIG_IDEDMA_PCI_AUTO=y CONFIG_BLK_DEV_IDE_PMAC=y CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y CONFIG_BLK_DEV_IDEDMA_PMAC=y -# CONFIG_BLK_DEV_IDE_PMAC_BLINK is not set # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set @@ -478,6 +496,7 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_SATA_MV is not set # CONFIG_SCSI_SATA_NV is not set # CONFIG_SCSI_PDC_ADMA is not set +# CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set @@ -497,7 +516,6 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set @@ -514,9 +532,7 @@ CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=m -CONFIG_MD_RAID5=y -# CONFIG_MD_RAID5_RESHAPE is not set -CONFIG_MD_RAID6=m +# CONFIG_MD_RAID456 is not set CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m CONFIG_BLK_DEV_DM=y @@ -559,7 +575,6 @@ CONFIG_IEEE1394_OHCI1394=y # CONFIG_IEEE1394_VIDEO1394=m CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set CONFIG_IEEE1394_ETH1394=m CONFIG_IEEE1394_DV1394=m CONFIG_IEEE1394_RAWIO=y @@ -573,6 +588,7 @@ CONFIG_IEEE1394_RAWIO=y # Macintosh device drivers # CONFIG_ADB_PMU=y +# CONFIG_ADB_PMU_LED is not set CONFIG_PMAC_SMU=y CONFIG_THERM_PM72=y CONFIG_WINDFARM=y @@ -643,6 +659,7 @@ CONFIG_TIGON3=y # CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set # # Token Ring devices @@ -739,6 +756,7 @@ CONFIG_SERIO=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -754,6 +772,7 @@ CONFIG_HW_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_BRIQ_PANEL is not set # # IPMI @@ -764,6 +783,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set @@ -774,6 +794,7 @@ CONFIG_GEN_RTC=y # Ftape, the floppy tape device driver # CONFIG_AGP=m +# CONFIG_AGP_SIS is not set # CONFIG_AGP_VIA is not set CONFIG_AGP_UNINORTH=m # CONFIG_DRM is not set @@ -813,6 +834,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_PIIX4 is not set CONFIG_I2C_POWERMAC=y # CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set @@ -849,7 +871,6 @@ CONFIG_I2C_POWERMAC=y # # Dallas's 1-wire bus # -# CONFIG_W1 is not set # # Hardware Monitoring support @@ -865,6 +886,7 @@ CONFIG_I2C_POWERMAC=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -875,22 +897,19 @@ CONFIG_I2C_POWERMAC=y # # Graphics support # +CONFIG_FIRMWARE_EDID=y CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_MACMODES=y -CONFIG_FB_FIRMWARE_EDID=y +# CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set CONFIG_FB_OF=y -# CONFIG_FB_CONTROL is not set -# CONFIG_FB_PLATINUM is not set -# CONFIG_FB_VALKYRIE is not set -# CONFIG_FB_CT65550 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set @@ -990,6 +1009,18 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1027,6 +1058,17 @@ CONFIG_SND_POWERMAC=m CONFIG_SND_POWERMAC_AUTO_DRC=y # +# Apple Onboard Audio driver +# +CONFIG_SND_AOA=m +CONFIG_SND_AOA_FABRIC_LAYOUT=m +CONFIG_SND_AOA_ONYX=m +CONFIG_SND_AOA_TAS=m +CONFIG_SND_AOA_TOONIE=m +CONFIG_SND_AOA_SOUNDBUS=m +CONFIG_SND_AOA_SOUNDBUS_I2S=m + +# # USB devices # CONFIG_SND_USB_AUDIO=m @@ -1060,6 +1102,7 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN is not set @@ -1110,9 +1153,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set +# CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set @@ -1155,6 +1196,7 @@ CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_ANYDATA is not set +# CONFIG_USB_SERIAL_ARK3116 is not set CONFIG_USB_SERIAL_BELKIN=m # CONFIG_USB_SERIAL_WHITEHEAT is not set CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m @@ -1162,6 +1204,7 @@ CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m CONFIG_USB_SERIAL_CYPRESS_M8=m CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m +# CONFIG_USB_SERIAL_FUNSOFT is not set CONFIG_USB_SERIAL_VISOR=m CONFIG_USB_SERIAL_IPAQ=m CONFIG_USB_SERIAL_IR=m @@ -1191,9 +1234,11 @@ CONFIG_USB_SERIAL_PL2303=m # CONFIG_USB_SERIAL_HP4X is not set CONFIG_USB_SERIAL_SAFE=m CONFIG_USB_SERIAL_SAFE_PADDED=y +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set CONFIG_USB_SERIAL_TI=m CONFIG_USB_SERIAL_CYBERJACK=m CONFIG_USB_SERIAL_XIRCOM=m +# CONFIG_USB_SERIAL_OPTION is not set CONFIG_USB_SERIAL_OMNINET=m CONFIG_USB_EZUSB=y @@ -1207,10 +1252,12 @@ CONFIG_USB_EZUSB=y # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +CONFIG_USB_APPLEDISPLAY=m # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set @@ -1235,6 +1282,14 @@ CONFIG_USB_EZUSB=y # CONFIG_NEW_LEDS is not set # +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set @@ -1249,6 +1304,19 @@ CONFIG_USB_EZUSB=y # CONFIG_RTC_CLASS is not set # +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# # File systems # CONFIG_EXT2_FS=y @@ -1273,7 +1341,6 @@ CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y # CONFIG_XFS_QUOTA is not set CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y @@ -1282,6 +1349,7 @@ CONFIG_XFS_POSIX_ACL=y # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m @@ -1363,7 +1431,9 @@ CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_SMB_FS is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set # CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1444,6 +1514,9 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_PLIST=y # # Instrumentation Support @@ -1457,14 +1530,19 @@ CONFIG_OPROFILE=y # # CONFIG_PRINTK_TIME is not set CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y @@ -1476,11 +1554,7 @@ CONFIG_FORCED_INLINING=y # CONFIG_DEBUGGER is not set CONFIG_IRQSTACKS=y CONFIG_BOOTX_TEXT=y -# CONFIG_PPC_EARLY_DEBUG_LPAR is not set -# CONFIG_PPC_EARLY_DEBUG_G5 is not set -# CONFIG_PPC_EARLY_DEBUG_RTAS is not set -# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set -# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set +# CONFIG_PPC_EARLY_DEBUG is not set # # Security options diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig index a95e455a1944..72ed95b3ead6 100644 --- a/arch/powerpc/configs/iseries_defconfig +++ b/arch/powerpc/configs/iseries_defconfig @@ -1,16 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.17-rc1 -# Wed Apr 19 11:46:44 2006 +# Linux kernel version: 2.6.18-rc3 +# Tue Aug 8 09:15:46 2006 # CONFIG_PPC64=y CONFIG_64BIT=y CONFIG_PPC_MERGE=y CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y @@ -34,6 +36,7 @@ CONFIG_PPC_STD_MMU=y CONFIG_VIRT_CPU_ACCOUNTING=y CONFIG_SMP=y CONFIG_NR_CPUS=32 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options @@ -51,6 +54,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set CONFIG_SYSCTL=y CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y @@ -69,10 +73,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -113,10 +119,14 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_PPC_ISERIES=y # CONFIG_EMBEDDED6xx is not set # CONFIG_APUS is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_UDBG_RTAS_CONSOLE is not set # CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set CONFIG_IBMVIO=y # CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_WANT_EARLY_SERIAL is not set @@ -135,6 +145,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_IRQ_ALL_CPUS=y CONFIG_LPARCFG=y # CONFIG_NUMA is not set @@ -149,6 +160,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y # CONFIG_PPC_64K_PAGES is not set # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y @@ -164,6 +176,7 @@ CONFIG_GENERIC_ISA_DMA=y # CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set # CONFIG_PCI_DEBUG is not set # @@ -207,6 +220,8 @@ CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -219,6 +234,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -246,9 +262,11 @@ CONFIG_NETFILTER_XT_MATCH_MARK=m # CONFIG_NETFILTER_XT_MATCH_POLICY is not set # CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATE=m +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m @@ -267,6 +285,7 @@ CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set # CONFIG_IP_NF_H323 is not set +# CONFIG_IP_NF_SIP is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m @@ -360,6 +379,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker @@ -396,6 +416,7 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -453,6 +474,7 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -464,7 +486,6 @@ CONFIG_SCSI_IBMVSCSI=m # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set @@ -481,9 +502,7 @@ CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=m -CONFIG_MD_RAID5=y -# CONFIG_MD_RAID5_RESHAPE is not set -CONFIG_MD_RAID6=m +# CONFIG_MD_RAID456 is not set CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m CONFIG_BLK_DEV_DM=y @@ -596,6 +615,7 @@ CONFIG_E1000=m # CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set # # Token Ring devices @@ -696,6 +716,7 @@ CONFIG_SERIAL_ICOM=m CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_BRIQ_PANEL is not set # # IPMI @@ -706,6 +727,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set @@ -741,7 +763,6 @@ CONFIG_MAX_RAW_DEVS=256 # # Dallas's 1-wire bus # -# CONFIG_W1 is not set # # Hardware Monitoring support @@ -757,6 +778,7 @@ CONFIG_MAX_RAW_DEVS=256 # Multimedia devices # # CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -766,7 +788,9 @@ CONFIG_MAX_RAW_DEVS=256 # # Graphics support # +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -801,6 +825,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_NEW_LEDS is not set # +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set @@ -815,6 +847,19 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_RTC_CLASS is not set # +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# # File systems # CONFIG_EXT2_FS=y @@ -843,7 +888,6 @@ CONFIG_JFS_SECURITY=y # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y # CONFIG_XFS_QUOTA is not set CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y @@ -852,6 +896,7 @@ CONFIG_XFS_POSIX_ACL=y # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m @@ -933,8 +978,10 @@ CONFIG_RPCSEC_GSS_SPKM3=m # CONFIG_SMB_FS is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1013,10 +1060,12 @@ CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m +CONFIG_PLIST=y # # Instrumentation Support # +# CONFIG_PROFILING is not set # CONFIG_KPROBES is not set # @@ -1024,14 +1073,19 @@ CONFIG_TEXTSEARCH_FSM=m # # CONFIG_PRINTK_TIME is not set CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y @@ -1042,11 +1096,7 @@ CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUGGER is not set CONFIG_IRQSTACKS=y -# CONFIG_PPC_EARLY_DEBUG_LPAR is not set -# CONFIG_PPC_EARLY_DEBUG_G5 is not set -# CONFIG_PPC_EARLY_DEBUG_RTAS is not set -# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set -# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set +# CONFIG_PPC_EARLY_DEBUG is not set # # Security options diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig index addc79381c3b..3545af9896af 100644 --- a/arch/powerpc/configs/pmac32_defconfig +++ b/arch/powerpc/configs/pmac32_defconfig @@ -1,16 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.17-rc5 -# Mon May 29 14:47:49 2006 +# Linux kernel version: 2.6.17 +# Mon Jul 3 14:20:49 2006 # # CONFIG_PPC64 is not set CONFIG_PPC32=y CONFIG_PPC_MERGE=y CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y @@ -29,6 +31,7 @@ CONFIG_CLASSIC32=y # CONFIG_PPC_82xx is not set # CONFIG_PPC_83xx is not set # CONFIG_PPC_85xx is not set +# CONFIG_PPC_86xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_8xx is not set @@ -39,6 +42,7 @@ CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options @@ -72,10 +76,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -119,6 +125,9 @@ CONFIG_PPC_MULTIPLATFORM=y # CONFIG_APUS is not set # CONFIG_PPC_CHRP is not set CONFIG_PPC_PMAC=y +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_MPIC=y # CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set @@ -154,6 +163,7 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # CONFIG_KEXEC is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y @@ -164,6 +174,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set CONFIG_PM=y @@ -182,6 +193,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set # CONFIG_PCI_DEBUG is not set # @@ -256,6 +268,8 @@ CONFIG_INET_ESP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -268,6 +282,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -292,9 +307,11 @@ CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATE=m +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m @@ -313,6 +330,7 @@ CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m CONFIG_IP_NF_PPTP=m CONFIG_IP_NF_H323=m +# CONFIG_IP_NF_SIP is not set # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m @@ -457,6 +475,7 @@ CONFIG_IRTTY_SIR=m # CONFIG_ALI_FIR is not set # CONFIG_VLSI_FIR is not set # CONFIG_VIA_FIR is not set +# CONFIG_MCS_FIR is not set CONFIG_BT=m CONFIG_BT_L2CAP=m CONFIG_BT_SCO=m @@ -500,6 +519,7 @@ CONFIG_WIRELESS_EXT=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker @@ -600,7 +620,6 @@ CONFIG_BLK_DEV_PDC202XX_NEW=y CONFIG_BLK_DEV_IDE_PMAC=y CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y CONFIG_BLK_DEV_IDEDMA_PMAC=y -CONFIG_BLK_DEV_IDE_PMAC_BLINK=y # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set @@ -661,6 +680,7 @@ CONFIG_SCSI_AIC7XXX_OLD=m # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -705,9 +725,7 @@ CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID10=m -CONFIG_MD_RAID5=m -CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_RAID6=m +# CONFIG_MD_RAID456 is not set CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m CONFIG_BLK_DEV_DM=m @@ -750,7 +768,6 @@ CONFIG_IEEE1394_OHCI1394=m # CONFIG_IEEE1394_VIDEO1394=m CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set # CONFIG_IEEE1394_ETH1394 is not set CONFIG_IEEE1394_DV1394=m CONFIG_IEEE1394_RAWIO=m @@ -766,9 +783,12 @@ CONFIG_IEEE1394_RAWIO=m CONFIG_ADB=y CONFIG_ADB_CUDA=y CONFIG_ADB_PMU=y +CONFIG_ADB_PMU_LED=y +CONFIG_ADB_PMU_LED_IDE=y CONFIG_PMAC_APM_EMU=m CONFIG_PMAC_MEDIABAY=y CONFIG_PMAC_BACKLIGHT=y +CONFIG_PMAC_BACKLIGHT_LEGACY=y CONFIG_INPUT_ADBHID=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_THERM_WINDTUNNEL=m @@ -858,6 +878,7 @@ CONFIG_PCNET32=y # CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set # # Token Ring devices @@ -908,6 +929,7 @@ CONFIG_APPLE_AIRPORT=m # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support # CONFIG_PRISM54=m +# CONFIG_USB_ZD1201 is not set # CONFIG_HOSTAP is not set CONFIG_NET_WIRELESS=y @@ -998,6 +1020,7 @@ CONFIG_SERIO=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -1029,6 +1052,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -1040,6 +1064,7 @@ CONFIG_GEN_RTC=y # Ftape, the floppy tape device driver # CONFIG_AGP=m +# CONFIG_AGP_SIS is not set # CONFIG_AGP_VIA is not set CONFIG_AGP_UNINORTH=m CONFIG_DRM=m @@ -1092,6 +1117,7 @@ CONFIG_I2C_ALGOBIT=y CONFIG_I2C_POWERMAC=y # CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set @@ -1156,12 +1182,13 @@ CONFIG_VIDEO_V4L2=y # # Graphics support # +# CONFIG_FIRMWARE_EDID is not set CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_MACMODES=y -CONFIG_FB_FIRMWARE_EDID=y +CONFIG_FB_BACKLIGHT=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set @@ -1178,6 +1205,7 @@ CONFIG_FB_IMSTT=y # CONFIG_FB_S1D13XXX is not set CONFIG_FB_NVIDIA=y CONFIG_FB_NVIDIA_I2C=y +CONFIG_FB_NVIDIA_BACKLIGHT=y # CONFIG_FB_RIVA is not set CONFIG_FB_MATROX=y CONFIG_FB_MATROX_MILLENIUM=y @@ -1187,12 +1215,15 @@ CONFIG_FB_MATROX_MYSTIQUE=y # CONFIG_FB_MATROX_MULTIHEAD is not set CONFIG_FB_RADEON=y CONFIG_FB_RADEON_I2C=y +CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_RADEON_DEBUG is not set CONFIG_FB_ATY128=y +CONFIG_FB_ATY128_BACKLIGHT=y CONFIG_FB_ATY=y CONFIG_FB_ATY_CT=y # CONFIG_FB_ATY_GENERIC_LCD is not set CONFIG_FB_ATY_GX=y +CONFIG_FB_ATY_BACKLIGHT=y # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set @@ -1221,7 +1252,11 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=m +CONFIG_LCD_DEVICE=y # # Sound @@ -1278,6 +1313,18 @@ CONFIG_SND_DUMMY=m # CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1315,6 +1362,17 @@ CONFIG_SND_POWERMAC=m CONFIG_SND_POWERMAC_AUTO_DRC=y # +# Apple Onboard Audio driver +# +CONFIG_SND_AOA=m +CONFIG_SND_AOA_FABRIC_LAYOUT=m +CONFIG_SND_AOA_ONYX=m +CONFIG_SND_AOA_TAS=m +CONFIG_SND_AOA_TOONIE=m +CONFIG_SND_AOA_SOUNDBUS=m +CONFIG_SND_AOA_SOUNDBUS_I2S=m + +# # USB devices # CONFIG_SND_USB_AUDIO=m @@ -1355,6 +1413,7 @@ CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_EHCI_HCD=m CONFIG_USB_EHCI_SPLIT_ISO=y CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN is not set @@ -1431,7 +1490,6 @@ CONFIG_USB_NET_NET1080=m # CONFIG_USB_NET_RNDIS_HOST is not set # CONFIG_USB_NET_CDC_SUBSET is not set CONFIG_USB_NET_ZAURUS=m -# CONFIG_USB_ZD1201 is not set CONFIG_USB_MON=y # @@ -1499,10 +1557,12 @@ CONFIG_USB_EZUSB=y # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set +# CONFIG_USB_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +CONFIG_USB_APPLEDISPLAY=m # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set @@ -1524,7 +1584,8 @@ CONFIG_USB_EZUSB=y # # LED devices # -# CONFIG_NEW_LEDS is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y # # LED drivers @@ -1533,6 +1594,10 @@ CONFIG_USB_EZUSB=y # # LED Triggers # +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +CONFIG_LEDS_TRIGGER_IDE_DISK=y +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set # # InfiniBand support @@ -1549,6 +1614,19 @@ CONFIG_USB_EZUSB=y # CONFIG_RTC_CLASS is not set # +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# # File systems # CONFIG_EXT2_FS=y @@ -1569,6 +1647,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -1649,6 +1728,7 @@ CONFIG_RPCSEC_GSS_KRB5=y CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_CIFS is not set +# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1732,6 +1812,7 @@ CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m +CONFIG_PLIST=y # # Instrumentation Support @@ -1744,12 +1825,15 @@ CONFIG_OPROFILE=y # # CONFIG_PRINTK_TIME is not set # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1763,11 +1847,7 @@ CONFIG_XMON=y CONFIG_XMON_DEFAULT=y # CONFIG_BDI_SWITCH is not set CONFIG_BOOTX_TEXT=y -# CONFIG_PPC_EARLY_DEBUG_LPAR is not set -# CONFIG_PPC_EARLY_DEBUG_G5 is not set -# CONFIG_PPC_EARLY_DEBUG_RTAS is not set -# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set -# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set +# CONFIG_PPC_EARLY_DEBUG is not set # # Security options diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index 31708ad4574e..c18e8600d78f 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.17-rc4 -# Sun May 28 07:26:56 2006 +# Linux kernel version: 2.6.18-rc3 +# Tue Aug 8 09:14:48 2006 # CONFIG_PPC64=y CONFIG_64BIT=y CONFIG_PPC_MERGE=y CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -35,6 +36,7 @@ CONFIG_PPC_STD_MMU=y CONFIG_VIRT_CPU_ACCOUNTING=y CONFIG_SMP=y CONFIG_NR_CPUS=128 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options @@ -52,6 +54,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set CONFIG_SYSCTL=y CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y @@ -70,10 +73,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -118,6 +123,9 @@ CONFIG_PPC_PSERIES=y # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set # CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_IBM_CELL_BLADE is not set +# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_XICS=y # CONFIG_U3_DART is not set CONFIG_MPIC=y @@ -149,6 +157,7 @@ CONFIG_BINFMT_MISC=m CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y CONFIG_HOTPLUG_CPU=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y @@ -173,6 +182,7 @@ CONFIG_SPARSEMEM_EXTREME=y # CONFIG_MEMORY_HOTPLUG is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y +CONFIG_RESOURCES_64BIT=y CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y # CONFIG_PPC_64K_PAGES is not set CONFIG_SCHED_SMT=y @@ -190,6 +200,7 @@ CONFIG_PPC_I8259=y # CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set # CONFIG_PCI_DEBUG is not set # @@ -238,6 +249,8 @@ CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -250,6 +263,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -277,6 +291,7 @@ CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set # CONFIG_IP_NF_H323 is not set +# CONFIG_IP_NF_SIP is not set CONFIG_IP_NF_QUEUE=m # @@ -316,6 +331,7 @@ CONFIG_LLC=y # Network testing # # CONFIG_NET_PKTGEN is not set +# CONFIG_NET_TCPPROBE is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -332,6 +348,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker @@ -352,6 +369,7 @@ CONFIG_PARPORT_PC=m # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_GSC is not set +# CONFIG_PARPORT_AX88796 is not set # CONFIG_PARPORT_1284 is not set # @@ -376,6 +394,7 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -487,6 +506,7 @@ CONFIG_SCSI_SAS_ATTRS=m # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -508,12 +528,6 @@ CONFIG_SCSI_IPR_TRACE=y CONFIG_SCSI_IPR_DUMP=y # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA_FC=m -CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE=y -CONFIG_SCSI_QLA21XX=m -CONFIG_SCSI_QLA22XX=m -CONFIG_SCSI_QLA2300=m -CONFIG_SCSI_QLA2322=m -CONFIG_SCSI_QLA24XX=m CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -528,9 +542,7 @@ CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=m -CONFIG_MD_RAID5=y -CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_RAID6=m +# CONFIG_MD_RAID456 is not set CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m CONFIG_BLK_DEV_DM=y @@ -651,6 +663,7 @@ CONFIG_IXGB=m # CONFIG_IXGB_NAPI is not set CONFIG_S2IO=m # CONFIG_S2IO_NAPI is not set +# CONFIG_MYRI10GE is not set # # Token Ring devices @@ -754,6 +767,7 @@ CONFIG_SERIO_LIBPS2=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -776,6 +790,7 @@ CONFIG_SERIAL_JSM=m CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_BRIQ_PANEL is not set # CONFIG_PRINTER is not set # CONFIG_PPDEV is not set # CONFIG_TIPAR is not set @@ -793,6 +808,7 @@ CONFIG_HVCS=m # Watchdog Cards # # CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set @@ -839,6 +855,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -876,7 +893,6 @@ CONFIG_I2C_ALGOBIT=y # # Dallas's 1-wire bus # -# CONFIG_W1 is not set # # Hardware Monitoring support @@ -892,6 +908,7 @@ CONFIG_I2C_ALGOBIT=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -902,19 +919,19 @@ CONFIG_I2C_ALGOBIT=y # # Graphics support # +CONFIG_FIRMWARE_EDID=y CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_MACMODES=y -CONFIG_FB_FIRMWARE_EDID=y +# CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set CONFIG_FB_OF=y -# CONFIG_FB_CT65550 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set @@ -993,6 +1010,7 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN is not set @@ -1083,10 +1101,12 @@ CONFIG_USB_MON=y # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set @@ -1124,12 +1144,14 @@ CONFIG_USB_MON=y CONFIG_INFINIBAND=m CONFIG_INFINIBAND_USER_MAD=m CONFIG_INFINIBAND_USER_ACCESS=m +CONFIG_INFINIBAND_ADDR_TRANS=y CONFIG_INFINIBAND_MTHCA=m CONFIG_INFINIBAND_MTHCA_DEBUG=y CONFIG_INFINIBAND_IPOIB=m CONFIG_INFINIBAND_IPOIB_DEBUG=y # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set CONFIG_INFINIBAND_SRP=m +# CONFIG_INFINIBAND_ISER is not set # # EDAC - error detection and reporting (RAS) (EXPERIMENTAL) @@ -1141,6 +1163,19 @@ CONFIG_INFINIBAND_SRP=m # CONFIG_RTC_CLASS is not set # +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# # File systems # CONFIG_EXT2_FS=y @@ -1169,15 +1204,16 @@ CONFIG_JFS_SECURITY=y # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y # CONFIG_XFS_QUOTA is not set CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set CONFIG_OCFS2_FS=m +CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -1259,8 +1295,10 @@ CONFIG_RPCSEC_GSS_SPKM3=m # CONFIG_SMB_FS is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1326,6 +1364,9 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_PLIST=y # # Instrumentation Support @@ -1339,14 +1380,19 @@ CONFIG_KPROBES=y # # CONFIG_PRINTK_TIME is not set CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 814f242aeb8c..956c2e5564b7 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -67,9 +67,9 @@ pci64-$(CONFIG_PPC64) += pci_64.o pci_dn.o pci_iommu.o \ pci_direct_iommu.o iomap.o pci32-$(CONFIG_PPC32) := pci_32.o obj-$(CONFIG_PCI) += $(pci64-y) $(pci32-y) -kexec-$(CONFIG_PPC64) := machine_kexec_64.o crash.o +kexec-$(CONFIG_PPC64) := machine_kexec_64.o kexec-$(CONFIG_PPC32) := machine_kexec_32.o -obj-$(CONFIG_KEXEC) += machine_kexec.o $(kexec-y) +obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o $(kexec-y) ifeq ($(CONFIG_PPC_ISERIES),y) $(obj)/head_64.o: $(obj)/lparmap.s diff --git a/arch/powerpc/kernel/cpu_setup_power4.S b/arch/powerpc/kernel/cpu_setup_power4.S index f69af2c5d7b3..76e97aa71c45 100644 --- a/arch/powerpc/kernel/cpu_setup_power4.S +++ b/arch/powerpc/kernel/cpu_setup_power4.S @@ -76,6 +76,8 @@ _GLOBAL(__setup_cpu_ppc970) mfspr r0,SPRN_HID0 li r11,5 /* clear DOZE and SLEEP */ rldimi r0,r11,52,8 /* set NAP and DPM */ + li r11,0 + rldimi r0,r11,32,31 /* clear EN_ATTN */ mtspr SPRN_HID0,r0 mfspr r0,SPRN_HID0 mfspr r0,SPRN_HID0 diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c index 358cecdc6aef..f04c18e08b8b 100644 --- a/arch/powerpc/kernel/crash.c +++ b/arch/powerpc/kernel/crash.c @@ -44,6 +44,7 @@ /* This keeps a track of which one is crashing cpu. */ int crashing_cpu = -1; static cpumask_t cpus_in_crash = CPU_MASK_NONE; +cpumask_t cpus_in_sr = CPU_MASK_NONE; static u32 *append_elf_note(u32 *buf, char *name, unsigned type, void *data, size_t data_len) @@ -139,7 +140,13 @@ void crash_ipi_callback(struct pt_regs *regs) if (ppc_md.kexec_cpu_down) ppc_md.kexec_cpu_down(1, 1); + +#ifdef CONFIG_PPC64 kexec_smp_wait(); +#else + for (;;); /* FIXME */ +#endif + /* NOTREACHED */ } @@ -255,7 +262,11 @@ static void crash_kexec_prepare_cpus(int cpu) * * do this if kexec in setup.c ? */ +#ifdef CONFIG_PPC64 smp_release_cpus(); +#else + /* FIXME */ +#endif } void crash_kexec_secondary(struct pt_regs *regs) diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index e16eb2a33173..6ff3cf506088 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -191,6 +191,37 @@ exception_marker: ori reg,reg,(label)@l; /* virt addr of handler ... */ #endif +/* + * Equal to EXCEPTION_PROLOG_PSERIES, except that it forces 64bit mode. + * The firmware calls the registered system_reset_fwnmi and + * machine_check_fwnmi handlers in 32bit mode if the cpu happens to run + * a 32bit application at the time of the event. + * This firmware bug is present on POWER4 and JS20. + */ +#define EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(area, label) \ + mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ + std r9,area+EX_R9(r13); /* save r9 - r12 */ \ + std r10,area+EX_R10(r13); \ + std r11,area+EX_R11(r13); \ + std r12,area+EX_R12(r13); \ + mfspr r9,SPRN_SPRG1; \ + std r9,area+EX_R13(r13); \ + mfcr r9; \ + clrrdi r12,r13,32; /* get high part of &label */ \ + mfmsr r10; \ + /* force 64bit mode */ \ + li r11,5; /* MSR_SF_LG|MSR_ISF_LG */ \ + rldimi r10,r11,61,0; /* insert into top 3 bits */ \ + /* done 64bit mode */ \ + mfspr r11,SPRN_SRR0; /* save SRR0 */ \ + LOAD_HANDLER(r12,label) \ + ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ + mtspr SPRN_SRR0,r12; \ + mfspr r12,SPRN_SRR1; /* and SRR1 */ \ + mtspr SPRN_SRR1,r10; \ + rfid; \ + b . /* prevent speculative execution */ + #define EXCEPTION_PROLOG_PSERIES(area, label) \ mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ std r9,area+EX_R9(r13); /* save r9 - r12 */ \ @@ -604,14 +635,14 @@ slb_miss_user_pseries: system_reset_fwnmi: HMT_MEDIUM mtspr SPRN_SPRG1,r13 /* save r13 */ - EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common) + EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(PACA_EXGEN, system_reset_common) .globl machine_check_fwnmi .align 7 machine_check_fwnmi: HMT_MEDIUM mtspr SPRN_SPRG1,r13 /* save r13 */ - EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) + EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(PACA_EXMC, machine_check_common) #ifdef CONFIG_PPC_ISERIES /*** ISeries-LPAR interrupt handlers ***/ diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 01bdae35cb55..7ee685433319 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -693,7 +693,7 @@ unsigned int irq_radix_revmap(struct irq_host *host, /* If not there, try to insert it */ virq = irq_find_mapping(host, hwirq); if (virq != NO_IRQ) - radix_tree_insert(tree, virq, &irq_map[virq]); + radix_tree_insert(tree, hwirq, &irq_map[virq]); bail: spin_unlock_irqrestore(&irq_big_lock, flags); return virq; diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c index 9f0898c89759..cd65c367b8b6 100644 --- a/arch/powerpc/kernel/kprobes.c +++ b/arch/powerpc/kernel/kprobes.c @@ -61,6 +61,8 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p) if (!ret) { memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t)); p->opcode = *p->addr; + flush_icache_range((unsigned long)p->ainsn.insn, + (unsigned long)p->ainsn.insn + sizeof(kprobe_opcode_t)); } return ret; diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index 7e98e778b52f..40a39291861f 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -112,9 +112,10 @@ static int __init add_legacy_port(struct device_node *np, int want_index, static int __init add_legacy_soc_port(struct device_node *np, struct device_node *soc_dev) { - phys_addr_t addr; + u64 addr; u32 *addrp; upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; + struct device_node *tsi = of_get_parent(np); /* We only support ports that have a clock frequency properly * encoded in the device-tree. @@ -134,7 +135,10 @@ static int __init add_legacy_soc_port(struct device_node *np, /* Add port, irq will be dealt with later. We passed a translated * IO port value. It will be fixed up later along with the irq */ - return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags, 0); + if (tsi && !strcmp(tsi->type, "tsi-bridge")) + return add_legacy_port(np, -1, UPIO_TSI, addr, addr, NO_IRQ, flags, 0); + else + return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags, 0); } static int __init add_legacy_isa_port(struct device_node *np, @@ -143,7 +147,7 @@ static int __init add_legacy_isa_port(struct device_node *np, u32 *reg; char *typep; int index = -1; - phys_addr_t taddr; + u64 taddr; DBG(" -> add_legacy_isa_port(%s)\n", np->full_name); @@ -165,10 +169,13 @@ static int __init add_legacy_isa_port(struct device_node *np, if (typep && *typep == 'S') index = simple_strtol(typep+1, NULL, 0) - 1; - /* Translate ISA address */ + /* Translate ISA address. If it fails, we still register the port + * with no translated address so that it can be picked up as an IO + * port later by the serial driver + */ taddr = of_translate_address(np, reg); if (taddr == OF_BAD_ADDR) - return -1; + taddr = 0; /* Add port, irq will be dealt with later */ return add_legacy_port(np, index, UPIO_PORT, reg[1], taddr, @@ -180,7 +187,7 @@ static int __init add_legacy_isa_port(struct device_node *np, static int __init add_legacy_pci_port(struct device_node *np, struct device_node *pci_dev) { - phys_addr_t addr, base; + u64 addr, base; u32 *addrp; unsigned int flags; int iotype, index = -1, lindex = 0; @@ -461,7 +468,7 @@ static int __init serial_dev_init(void) fixup_port_irq(i, np, port); if (port->iotype == UPIO_PORT) fixup_port_pio(i, np, port); - if (port->iotype == UPIO_MEM) + if ((port->iotype == UPIO_MEM) || (port->iotype == UPIO_TSI)) fixup_port_mmio(i, np, port); } diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c index a81ca1b841ec..e60a0c544d63 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec.c @@ -13,6 +13,7 @@ #include <linux/reboot.h> #include <linux/threads.h> #include <asm/machdep.h> +#include <asm/lmb.h> void machine_crash_shutdown(struct pt_regs *regs) { @@ -59,3 +60,58 @@ NORET_TYPE void machine_kexec(struct kimage *image) } for(;;); } + +static int __init early_parse_crashk(char *p) +{ + unsigned long size; + + if (!p) + return 1; + + size = memparse(p, &p); + + if (*p == '@') + crashk_res.start = memparse(p + 1, &p); + else + crashk_res.start = KDUMP_KERNELBASE; + + crashk_res.end = crashk_res.start + size - 1; + + return 0; +} +early_param("crashkernel", early_parse_crashk); + +void __init reserve_crashkernel(void) +{ + unsigned long size; + + if (crashk_res.start == 0) + return; + + /* We might have got these values via the command line or the + * device tree, either way sanitise them now. */ + + size = crashk_res.end - crashk_res.start + 1; + + if (crashk_res.start != KDUMP_KERNELBASE) + printk("Crash kernel location must be 0x%x\n", + KDUMP_KERNELBASE); + + crashk_res.start = KDUMP_KERNELBASE; + size = PAGE_ALIGN(size); + crashk_res.end = crashk_res.start + size - 1; + + /* Crash kernel trumps memory limit */ + if (memory_limit && memory_limit <= crashk_res.end) { + memory_limit = crashk_res.end + 1; + printk("Adjusted memory limit for crashkernel, now 0x%lx\n", + memory_limit); + } + + lmb_reserve(crashk_res.start, size); +} + +int overlaps_crashkernel(unsigned long start, unsigned long size) +{ + return (start + size) > crashk_res.start && start <= crashk_res.end; +} diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c index b438d45a068c..be58985c7681 100644 --- a/arch/powerpc/kernel/machine_kexec_64.c +++ b/arch/powerpc/kernel/machine_kexec_64.c @@ -10,7 +10,6 @@ */ -#include <linux/cpumask.h> #include <linux/kexec.h> #include <linux/smp.h> #include <linux/thread_info.h> @@ -21,7 +20,6 @@ #include <asm/machdep.h> #include <asm/cacheflush.h> #include <asm/paca.h> -#include <asm/lmb.h> #include <asm/mmu.h> #include <asm/sections.h> /* _end */ #include <asm/prom.h> @@ -385,58 +383,3 @@ static int __init kexec_setup(void) return 0; } __initcall(kexec_setup); - -static int __init early_parse_crashk(char *p) -{ - unsigned long size; - - if (!p) - return 1; - - size = memparse(p, &p); - - if (*p == '@') - crashk_res.start = memparse(p + 1, &p); - else - crashk_res.start = KDUMP_KERNELBASE; - - crashk_res.end = crashk_res.start + size - 1; - - return 0; -} -early_param("crashkernel", early_parse_crashk); - -void __init reserve_crashkernel(void) -{ - unsigned long size; - - if (crashk_res.start == 0) - return; - - /* We might have got these values via the command line or the - * device tree, either way sanitise them now. */ - - size = crashk_res.end - crashk_res.start + 1; - - if (crashk_res.start != KDUMP_KERNELBASE) - printk("Crash kernel location must be 0x%x\n", - KDUMP_KERNELBASE); - - crashk_res.start = KDUMP_KERNELBASE; - size = PAGE_ALIGN(size); - crashk_res.end = crashk_res.start + size - 1; - - /* Crash kernel trumps memory limit */ - if (memory_limit && memory_limit <= crashk_res.end) { - memory_limit = crashk_res.end + 1; - printk("Adjusted memory limit for crashkernel, now 0x%lx\n", - memory_limit); - } - - lmb_reserve(crashk_res.start, size); -} - -int overlaps_crashkernel(unsigned long start, unsigned long size) -{ - return (start + size) > crashk_res.start && start <= crashk_res.end; -} diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index bfb407fc1aa1..e3ed21cd3d94 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -687,7 +687,7 @@ _GLOBAL(kexec_sequence) /* clear out hardware hash page table and tlb */ ld r5,0(r27) /* deref function descriptor */ mtctr r5 - bctrl /* ppc_md.hash_clear_all(void); */ + bctrl /* ppc_md.hpte_clear_all(void); */ /* * kexec image calling is: diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index ebd501a59abd..462bced40c12 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -557,7 +557,9 @@ unsigned long prom_memparse(const char *ptr, const char **retptr) static void __init early_cmdline_parse(void) { struct prom_t *_prom = &RELOC(prom); +#ifdef CONFIG_PPC64 const char *opt; +#endif char *p; int l = 0; @@ -2030,6 +2032,39 @@ static void __init fixup_device_tree_maple(void) #define fixup_device_tree_maple() #endif +#ifdef CONFIG_PPC_CHRP +/* Pegasos lacks the "ranges" property in the isa node */ +static void __init fixup_device_tree_chrp(void) +{ + phandle isa; + u32 isa_ranges[6]; + char *name; + int rc; + + name = "/pci@80000000/isa@c"; + isa = call_prom("finddevice", 1, 1, ADDR(name)); + if (!PHANDLE_VALID(isa)) + return; + + rc = prom_getproplen(isa, "ranges"); + if (rc != 0 && rc != PROM_ERROR) + return; + + prom_printf("Fixing up missing ISA range on Pegasos...\n"); + + isa_ranges[0] = 0x1; + isa_ranges[1] = 0x0; + isa_ranges[2] = 0x01006000; + isa_ranges[3] = 0x0; + isa_ranges[4] = 0x0; + isa_ranges[5] = 0x00010000; + prom_setprop(isa, name, "ranges", + isa_ranges, sizeof(isa_ranges)); +} +#else +#define fixup_device_tree_chrp() +#endif + #if defined(CONFIG_PPC64) && defined(CONFIG_PPC_PMAC) static void __init fixup_device_tree_pmac(void) { @@ -2077,6 +2112,7 @@ static void __init fixup_device_tree_pmac(void) static void __init fixup_device_tree(void) { fixup_device_tree_maple(); + fixup_device_tree_chrp(); fixup_device_tree_pmac(); } diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c index 6a7e997c401d..11052c212ad5 100644 --- a/arch/powerpc/kernel/prom_parse.c +++ b/arch/powerpc/kernel/prom_parse.c @@ -598,11 +598,6 @@ static struct device_node *of_irq_find_parent(struct device_node *child) return p; } -static u8 of_irq_pci_swizzle(u8 slot, u8 pin) -{ - return (((pin - 1) + slot) % 4) + 1; -} - /* This doesn't need to be called if you don't have any special workaround * flags to pass */ @@ -891,6 +886,12 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq } EXPORT_SYMBOL_GPL(of_irq_map_one); +#ifdef CONFIG_PCI +static u8 of_irq_pci_swizzle(u8 slot, u8 pin) +{ + return (((pin - 1) + slot) % 4) + 1; +} + int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) { struct device_node *dn, *ppnode; @@ -967,4 +968,4 @@ int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) return of_irq_map_raw(ppnode, &lspec, laddr, out_irq); } EXPORT_SYMBOL_GPL(of_irq_map_pci); - +#endif /* CONFIG_PCI */ diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 4a4cb5598402..77f1e06d208d 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -569,6 +569,27 @@ int rtas_set_indicator(int indicator, int index, int new_value) } EXPORT_SYMBOL(rtas_set_indicator); +/* + * Ignoring RTAS extended delay + */ +int rtas_set_indicator_fast(int indicator, int index, int new_value) +{ + int rc; + int token = rtas_token("set-indicator"); + + if (token == RTAS_UNKNOWN_SERVICE) + return -ENOENT; + + rc = rtas_call(token, 3, 1, NULL, indicator, index, new_value); + + WARN_ON(rc == -2 || (rc >= 9900 && rc <= 9905)); + + if (rc < 0) + return rtas_error_rc(rc); + + return rc; +} + void rtas_restart(char *cmd) { if (rtas_flash_term_hook) diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 46c56cfd1b2f..6a9bc9ce54e0 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -144,13 +144,15 @@ void smp_message_recv(int msg, struct pt_regs *regs) void smp_send_reschedule(int cpu) { - smp_ops->message_pass(cpu, PPC_MSG_RESCHEDULE); + if (likely(smp_ops)) + smp_ops->message_pass(cpu, PPC_MSG_RESCHEDULE); } #ifdef CONFIG_DEBUGGER void smp_send_debugger_break(int cpu) { - smp_ops->message_pass(cpu, PPC_MSG_DEBUGGER_BREAK); + if (likely(smp_ops)) + smp_ops->message_pass(cpu, PPC_MSG_DEBUGGER_BREAK); } #endif @@ -158,7 +160,7 @@ void smp_send_debugger_break(int cpu) void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *)) { crash_ipi_function_ptr = crash_ipi_callback; - if (crash_ipi_callback) { + if (crash_ipi_callback && smp_ops) { mb(); smp_ops->message_pass(MSG_ALL_BUT_SELF, PPC_MSG_DEBUGGER_BREAK); } @@ -220,6 +222,9 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic, /* Can deadlock when called with interrupts disabled */ WARN_ON(irqs_disabled()); + if (unlikely(smp_ops == NULL)) + return -1; + data.func = func; data.info = info; atomic_set(&data.started, 0); @@ -357,7 +362,10 @@ void __init smp_prepare_cpus(unsigned int max_cpus) smp_store_cpu_info(boot_cpuid); cpu_callin_map[boot_cpuid] = 1; - max_cpus = smp_ops->probe(); + if (smp_ops) + max_cpus = smp_ops->probe(); + else + max_cpus = 1; smp_space_timers(max_cpus); @@ -453,7 +461,7 @@ void generic_mach_cpu_die(void) static int __devinit cpu_enable(unsigned int cpu) { - if (smp_ops->cpu_enable) + if (smp_ops && smp_ops->cpu_enable) return smp_ops->cpu_enable(cpu); return -ENOSYS; @@ -467,7 +475,8 @@ int __devinit __cpu_up(unsigned int cpu) if (!cpu_enable(cpu)) return 0; - if (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu)) + if (smp_ops == NULL || + (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu))) return -EINVAL; /* Make sure callin-map entry is 0 (can be leftover a CPU @@ -568,7 +577,8 @@ void __init smp_cpus_done(unsigned int max_cpus) old_mask = current->cpus_allowed; set_cpus_allowed(current, cpumask_of_cpu(boot_cpuid)); - smp_ops->setup_cpu(boot_cpuid); + if (smp_ops) + smp_ops->setup_cpu(boot_cpuid); set_cpus_allowed(current, old_mask); diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index 010435095550..fec228cd0163 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -278,7 +278,7 @@ static void unregister_cpu_online(unsigned int cpu) } #endif /* CONFIG_HOTPLUG_CPU */ -static int __devinit sysfs_cpu_notify(struct notifier_block *self, +static int __cpuinit sysfs_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu) { unsigned int cpu = (unsigned int)(long)hcpu; @@ -296,7 +296,7 @@ static int __devinit sysfs_cpu_notify(struct notifier_block *self, return NOTIFY_OK; } -static struct notifier_block __devinitdata sysfs_cpu_nb = { +static struct notifier_block __cpuinitdata sysfs_cpu_nb = { .notifier_call = sysfs_cpu_notify, }; diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 774c0a3c5019..18e59e43d2b3 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -417,7 +417,7 @@ static __inline__ void timer_check_rtc(void) /* * This version of gettimeofday has microsecond resolution. */ -static inline void __do_gettimeofday(struct timeval *tv, u64 tb_val) +static inline void __do_gettimeofday(struct timeval *tv) { unsigned long sec, usec; u64 tb_ticks, xsec; @@ -431,7 +431,12 @@ static inline void __do_gettimeofday(struct timeval *tv, u64 tb_val) * without a divide (and in fact, without a multiply) */ temp_varp = do_gtod.varp; - tb_ticks = tb_val - temp_varp->tb_orig_stamp; + + /* Sampling the time base must be done after loading + * do_gtod.varp in order to avoid racing with update_gtod. + */ + data_barrier(temp_varp); + tb_ticks = get_tb() - temp_varp->tb_orig_stamp; temp_tb_to_xs = temp_varp->tb_to_xs; temp_stamp_xsec = temp_varp->stamp_xsec; xsec = temp_stamp_xsec + mulhdu(tb_ticks, temp_tb_to_xs); @@ -464,7 +469,7 @@ void do_gettimeofday(struct timeval *tv) tv->tv_usec = usec; return; } - __do_gettimeofday(tv, get_tb()); + __do_gettimeofday(tv); } EXPORT_SYMBOL(do_gettimeofday); @@ -650,6 +655,7 @@ void timer_interrupt(struct pt_regs * regs) int next_dec; int cpu = smp_processor_id(); unsigned long ticks; + u64 tb_next_jiffy; #ifdef CONFIG_PPC32 if (atomic_read(&ppc_n_lost_interrupts) != 0) @@ -691,11 +697,14 @@ void timer_interrupt(struct pt_regs * regs) continue; write_seqlock(&xtime_lock); - tb_last_jiffy += tb_ticks_per_jiffy; - tb_last_stamp = per_cpu(last_jiffy, cpu); - do_timer(regs); - timer_recalc_offset(tb_last_jiffy); - timer_check_rtc(); + tb_next_jiffy = tb_last_jiffy + tb_ticks_per_jiffy; + if (per_cpu(last_jiffy, cpu) >= tb_next_jiffy) { + tb_last_jiffy = tb_next_jiffy; + tb_last_stamp = per_cpu(last_jiffy, cpu); + do_timer(regs); + timer_recalc_offset(tb_last_jiffy); + timer_check_rtc(); + } write_sequnlock(&xtime_lock); } diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 3c668078e524..9b352bd0a460 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -55,9 +55,6 @@ #ifdef CONFIG_PPC64 /* XXX */ #define _IO_BASE pci_io_base -#ifdef CONFIG_KEXEC -cpumask_t cpus_in_sr = CPU_MASK_NONE; -#endif #endif #ifdef CONFIG_DEBUGGER @@ -150,13 +147,9 @@ int die(const char *str, struct pt_regs *regs, long err) if (in_interrupt()) panic("Fatal exception in interrupt"); - if (panic_on_oops) { -#ifdef CONFIG_PPC64 - printk(KERN_EMERG "Fatal exception: panic in 5 seconds\n"); - ssleep(5); -#endif + if (panic_on_oops) panic("Fatal exception"); - } + do_exit(err); return 0; @@ -215,6 +208,19 @@ void system_reset_exception(struct pt_regs *regs) die("System Reset", regs, SIGABRT); + /* + * Some CPUs when released from the debugger will execute this path. + * These CPUs entered the debugger via a soft-reset. If the CPU was + * hung before entering the debugger it will return to the hung + * state when exiting this function. This causes a problem in + * kdump since the hung CPU(s) will not respond to the IPI sent + * from kdump. To prevent the problem we call crash_kexec_secondary() + * here. If a kdump had not been initiated or we exit the debugger + * with the "exit and recover" command (x) crash_kexec_secondary() + * will return after 5ms and the CPU returns to its previous state. + */ + crash_kexec_secondary(regs); + /* Must die if the interrupt is not recoverable */ if (!(regs->msr & MSR_RI)) panic("Unrecoverable System Reset"); @@ -579,14 +585,14 @@ static void parse_fpe(struct pt_regs *regs) #define INST_MFSPR_PVR_MASK 0xfc1fffff #define INST_DCBA 0x7c0005ec -#define INST_DCBA_MASK 0x7c0007fe +#define INST_DCBA_MASK 0xfc0007fe #define INST_MCRXR 0x7c000400 -#define INST_MCRXR_MASK 0x7c0007fe +#define INST_MCRXR_MASK 0xfc0007fe #define INST_STRING 0x7c00042a -#define INST_STRING_MASK 0x7c0007fe -#define INST_STRING_GEN_MASK 0x7c00067e +#define INST_STRING_MASK 0xfc0007fe +#define INST_STRING_GEN_MASK 0xfc00067e #define INST_LSWI 0x7c0004aa #define INST_LSWX 0x7c00042a #define INST_STSWI 0x7c0005aa diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c index 0835b4841dea..2d17f2b8eda7 100644 --- a/arch/powerpc/kernel/udbg_16550.c +++ b/arch/powerpc/kernel/udbg_16550.c @@ -81,10 +81,14 @@ static int udbg_550_getc(void) void udbg_init_uart(void __iomem *comport, unsigned int speed, unsigned int clock) { - unsigned int dll, base_bauds = clock / 16; + unsigned int dll, base_bauds; + if (clock == 0) + clock = 1843200; if (speed == 0) speed = 9600; + + base_bauds = clock / 16; dll = base_bauds / speed; if (comport) { diff --git a/arch/powerpc/kernel/vdso32/Makefile b/arch/powerpc/kernel/vdso32/Makefile index 8a3bed5f143a..3726358faae8 100644 --- a/arch/powerpc/kernel/vdso32/Makefile +++ b/arch/powerpc/kernel/vdso32/Makefile @@ -14,7 +14,8 @@ obj-vdso32 := $(addprefix $(obj)/, $(obj-vdso32)) EXTRA_CFLAGS := -shared -s -fno-common -fno-builtin -EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso32.so.1 +EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso32.so.1 \ + $(call ld-option, -Wl$(comma)--hash-style=sysv) EXTRA_AFLAGS := -D__VDSO32__ -s obj-y += vdso32_wrapper.o diff --git a/arch/powerpc/kernel/vdso32/vdso32.lds.S b/arch/powerpc/kernel/vdso32/vdso32.lds.S index f4bad720cb0a..6187af2d54c3 100644 --- a/arch/powerpc/kernel/vdso32/vdso32.lds.S +++ b/arch/powerpc/kernel/vdso32/vdso32.lds.S @@ -14,6 +14,7 @@ SECTIONS { . = VDSO32_LBASE + SIZEOF_HEADERS; .hash : { *(.hash) } :text + .gnu.hash : { *(.gnu.hash) } .dynsym : { *(.dynsym) } .dynstr : { *(.dynstr) } .gnu.version : { *(.gnu.version) } diff --git a/arch/powerpc/kernel/vdso64/Makefile b/arch/powerpc/kernel/vdso64/Makefile index ab39988452cc..43af9b2a6f3b 100644 --- a/arch/powerpc/kernel/vdso64/Makefile +++ b/arch/powerpc/kernel/vdso64/Makefile @@ -8,7 +8,8 @@ targets := $(obj-vdso64) vdso64.so obj-vdso64 := $(addprefix $(obj)/, $(obj-vdso64)) EXTRA_CFLAGS := -shared -s -fno-common -fno-builtin -EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso64.so.1 +EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso64.so.1 \ + $(call ld-option, -Wl$(comma)--hash-style=sysv) EXTRA_AFLAGS := -D__VDSO64__ -s obj-y += vdso64_wrapper.o diff --git a/arch/powerpc/kernel/vdso64/vdso64.lds.S b/arch/powerpc/kernel/vdso64/vdso64.lds.S index 4bdf224464ab..4a2b6dc0960c 100644 --- a/arch/powerpc/kernel/vdso64/vdso64.lds.S +++ b/arch/powerpc/kernel/vdso64/vdso64.lds.S @@ -12,6 +12,7 @@ SECTIONS { . = VDSO64_LBASE + SIZEOF_HEADERS; .hash : { *(.hash) } :text + .gnu.hash : { *(.gnu.hash) } .dynsym : { *(.dynsym) } .dynstr : { *(.dynstr) } .gnu.version : { *(.gnu.version) } diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 266b8b2ceac9..5615acc29527 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -153,7 +153,7 @@ static void free_hugepte_range(struct mmu_gather *tlb, hugepd_t *hpdp) hpdp->pd = 0; tlb->need_flush = 1; pgtable_free_tlb(tlb, pgtable_free_cache(hugepte, HUGEPTE_CACHE_NUM, - HUGEPTE_TABLE_SIZE-1)); + PGF_CACHENUM_MASK)); } #ifdef CONFIG_PPC_64K_PAGES diff --git a/arch/powerpc/mm/lmb.c b/arch/powerpc/mm/lmb.c index 4b17a7359924..716a2906a24d 100644 --- a/arch/powerpc/mm/lmb.c +++ b/arch/powerpc/mm/lmb.c @@ -320,7 +320,8 @@ void __init lmb_enforce_memory_limit(unsigned long memory_limit) break; } - lmb.rmo_size = lmb.memory.region[0].size; + if (lmb.memory.region[0].size < lmb.rmo_size) + lmb.rmo_size = lmb.memory.region[0].size; /* And truncate any reserves above the limit also. */ for (i = 0; i < lmb.reserved.cnt; i++) { diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 454fc53289ab..c3268d9877e4 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -14,7 +14,6 @@ config MPC8540_ADS config MPC85xx_CDS bool "Freescale MPC85xx CDS" select DEFAULT_UIMAGE - select PPC_I8259 if PCI help This option enables support for the MPC85xx CDS board diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index 06a497676c99..9d2acfbbeccd 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -37,79 +37,7 @@ unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; #endif -/* - * Internal interrupts are all Level Sensitive, and Positive Polarity - * - * Note: Likely, this table and the following function should be - * obtained and derived from the OF Device Tree. - */ -static u_char mpc85xx_ads_openpic_initsenses[] __initdata = { - MPC85XX_INTERNAL_IRQ_SENSES, - 0x0, /* External 0: */ -#if defined(CONFIG_PCI) - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 1: PCI slot 0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 2: PCI slot 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 3: PCI slot 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 4: PCI slot 3 */ -#else - 0x0, /* External 1: */ - 0x0, /* External 2: */ - 0x0, /* External 3: */ - 0x0, /* External 4: */ -#endif - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */ - 0x0, /* External 6: */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 7: PHY */ - 0x0, /* External 8: */ - 0x0, /* External 9: */ - 0x0, /* External 10: */ - 0x0, /* External 11: */ -}; - #ifdef CONFIG_PCI -/* - * interrupt routing - */ - -int -mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - static char pci_irq_table[][4] = - /* - * This is little evil, but works around the fact - * that revA boards have IDSEL starting at 18 - * and others boards (older) start at 12 - * - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 2 */ - {PIRQD, PIRQA, PIRQB, PIRQC}, - {PIRQC, PIRQD, PIRQA, PIRQB}, - {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 5 */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 12 */ - {PIRQD, PIRQA, PIRQB, PIRQC}, - {PIRQC, PIRQD, PIRQA, PIRQB}, - {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 15 */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 18 */ - {PIRQD, PIRQA, PIRQB, PIRQC}, - {PIRQC, PIRQD, PIRQA, PIRQB}, - {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 21 */ - }; - - const long min_idsel = 2, max_idsel = 21, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; -} - int mpc85xx_exclude_device(u_char bus, u_char devfn) { @@ -119,44 +47,63 @@ mpc85xx_exclude_device(u_char bus, u_char devfn) return PCIBIOS_SUCCESSFUL; } +void __init +mpc85xx_pcibios_fixup(void) +{ + struct pci_dev *dev = NULL; + + for_each_pci_dev(dev) + pci_read_irq_line(dev); +} #endif /* CONFIG_PCI */ void __init mpc85xx_ads_pic_init(void) { - struct mpic *mpic1; - phys_addr_t OpenPIC_PAddr; - - /* Determine the Physical Address of the OpenPIC regs */ - OpenPIC_PAddr = get_immrbase() + MPC85xx_OPENPIC_OFFSET; - - mpic1 = mpic_alloc(OpenPIC_PAddr, - MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, - 4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250, - mpc85xx_ads_openpic_initsenses, - sizeof(mpc85xx_ads_openpic_initsenses), - " OpenPIC "); - BUG_ON(mpic1 == NULL); - mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200); - mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280); - mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10300); - mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10380); - mpic_assign_isu(mpic1, 4, OpenPIC_PAddr + 0x10400); - mpic_assign_isu(mpic1, 5, OpenPIC_PAddr + 0x10480); - mpic_assign_isu(mpic1, 6, OpenPIC_PAddr + 0x10500); - mpic_assign_isu(mpic1, 7, OpenPIC_PAddr + 0x10580); - - /* dummy mappings to get to 48 */ - mpic_assign_isu(mpic1, 8, OpenPIC_PAddr + 0x10600); - mpic_assign_isu(mpic1, 9, OpenPIC_PAddr + 0x10680); - mpic_assign_isu(mpic1, 10, OpenPIC_PAddr + 0x10700); - mpic_assign_isu(mpic1, 11, OpenPIC_PAddr + 0x10780); - - /* External ints */ - mpic_assign_isu(mpic1, 12, OpenPIC_PAddr + 0x10000); - mpic_assign_isu(mpic1, 13, OpenPIC_PAddr + 0x10080); - mpic_assign_isu(mpic1, 14, OpenPIC_PAddr + 0x10100); - mpic_init(mpic1); + struct mpic *mpic; + struct resource r; + struct device_node *np = NULL; + + np = of_find_node_by_type(np, "open-pic"); + + if (np == NULL) { + printk(KERN_ERR "Could not find open-pic node\n"); + return; + } + + if(of_address_to_resource(np, 0, &r)) { + printk(KERN_ERR "Could not map mpic register space\n"); + of_node_put(np); + return; + } + + mpic = mpic_alloc(np, r.start, + MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + 4, 0, " OpenPIC "); + BUG_ON(mpic == NULL); + of_node_put(np); + + mpic_assign_isu(mpic, 0, r.start + 0x10200); + mpic_assign_isu(mpic, 1, r.start + 0x10280); + mpic_assign_isu(mpic, 2, r.start + 0x10300); + mpic_assign_isu(mpic, 3, r.start + 0x10380); + mpic_assign_isu(mpic, 4, r.start + 0x10400); + mpic_assign_isu(mpic, 5, r.start + 0x10480); + mpic_assign_isu(mpic, 6, r.start + 0x10500); + mpic_assign_isu(mpic, 7, r.start + 0x10580); + + /* Unused on this platform (leave room for 8548) */ + mpic_assign_isu(mpic, 8, r.start + 0x10600); + mpic_assign_isu(mpic, 9, r.start + 0x10680); + mpic_assign_isu(mpic, 10, r.start + 0x10700); + mpic_assign_isu(mpic, 11, r.start + 0x10780); + + /* External Interrupts */ + mpic_assign_isu(mpic, 12, r.start + 0x10000); + mpic_assign_isu(mpic, 13, r.start + 0x10080); + mpic_assign_isu(mpic, 14, r.start + 0x10100); + + mpic_init(mpic); } /* @@ -165,7 +112,9 @@ void __init mpc85xx_ads_pic_init(void) static void __init mpc85xx_ads_setup_arch(void) { struct device_node *cpu; +#ifdef CONFIG_PCI struct device_node *np; +#endif if (ppc_md.progress) ppc_md.progress("mpc85xx_ads_setup_arch()", 0); @@ -186,8 +135,7 @@ static void __init mpc85xx_ads_setup_arch(void) for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); - ppc_md.pci_swizzle = common_swizzle; - ppc_md.pci_map_irq = mpc85xx_map_irq; + ppc_md.pcibios_fixup = mpc85xx_pcibios_fixup; ppc_md.pci_exclude_device = mpc85xx_exclude_device; #endif diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c index 18e6e11f7020..1d357d32a29f 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c @@ -57,94 +57,8 @@ unsigned long isa_mem_base = 0; static int cds_pci_slot = 2; static volatile u8 *cadmus; -/* - * Internal interrupts are all Level Sensitive, and Positive Polarity - * - * Note: Likely, this table and the following function should be - * obtained and derived from the OF Device Tree. - */ -static u_char mpc85xx_cds_openpic_initsenses[] __initdata = { - MPC85XX_INTERNAL_IRQ_SENSES, -#if defined(CONFIG_PCI) - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Ext 0: PCI slot 0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 1: PCI slot 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 2: PCI slot 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 3: PCI slot 3 */ -#else - 0x0, /* External 0: */ - 0x0, /* External 1: */ - 0x0, /* External 2: */ - 0x0, /* External 3: */ -#endif - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */ - 0x0, /* External 6: */ - 0x0, /* External 7: */ - 0x0, /* External 8: */ - 0x0, /* External 9: */ - 0x0, /* External 10: */ -#ifdef CONFIG_PCI - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 11: PCI2 slot 0 */ -#else - 0x0, /* External 11: */ -#endif -}; - #ifdef CONFIG_PCI -/* - * interrupt routing - */ -int -mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - struct pci_controller *hose = pci_bus_to_hose(dev->bus->number); - - if (!hose->index) - { - /* Handle PCI1 interrupts */ - char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - - /* Note IRQ assignment for slots is based on which slot the elysium is - * in -- in this setup elysium is in slot #2 (this PIRQA as first - * interrupt on slot */ - { - { 0, 1, 2, 3 }, /* 16 - PMC */ - { 0, 1, 2, 3 }, /* 17 P2P (Tsi320) */ - { 0, 1, 2, 3 }, /* 18 - Slot 1 */ - { 1, 2, 3, 0 }, /* 19 - Slot 2 */ - { 2, 3, 0, 1 }, /* 20 - Slot 3 */ - { 3, 0, 1, 2 }, /* 21 - Slot 4 */ - }; - - const long min_idsel = 16, max_idsel = 21, irqs_per_slot = 4; - int i, j; - - for (i = 0; i < 6; i++) - for (j = 0; j < 4; j++) - pci_irq_table[i][j] = - ((pci_irq_table[i][j] + 5 - - cds_pci_slot) & 0x3) + PIRQ0A; - - return PCI_IRQ_TABLE_LOOKUP; - } else { - /* Handle PCI2 interrupts (if we have one) */ - char pci_irq_table[][4] = - { - /* - * We only have one slot and one interrupt - * going to PIRQA - PIRQD */ - { PIRQ1A, PIRQ1A, PIRQ1A, PIRQ1A }, /* 21 - slot 0 */ - }; - - const long min_idsel = 21, max_idsel = 21, irqs_per_slot = 4; - - return PCI_IRQ_TABLE_LOOKUP; - } -} #define ARCADIA_HOST_BRIDGE_IDSEL 17 #define ARCADIA_2ND_BRIDGE_IDSEL 3 @@ -210,50 +124,104 @@ mpc85xx_cds_pcibios_fixup(void) pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11); pci_dev_put(dev); } + + /* Now map all the PCI irqs */ + dev = NULL; + for_each_pci_dev(dev) + pci_read_irq_line(dev); +} + +#ifdef CONFIG_PPC_I8259 +#warning The i8259 PIC support is currently broken +static void mpc85xx_8259_cascade(unsigned int irq, struct + irq_desc *desc, struct pt_regs *regs) +{ + unsigned int cascade_irq = i8259_irq(regs); + + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq, regs); + + desc->chip->eoi(irq); } +#endif /* PPC_I8259 */ #endif /* CONFIG_PCI */ void __init mpc85xx_cds_pic_init(void) { - struct mpic *mpic1; - phys_addr_t OpenPIC_PAddr; + struct mpic *mpic; + struct resource r; + struct device_node *np = NULL; + struct device_node *cascade_node = NULL; + int cascade_irq; - /* Determine the Physical Address of the OpenPIC regs */ - OpenPIC_PAddr = get_immrbase() + MPC85xx_OPENPIC_OFFSET; + np = of_find_node_by_type(np, "open-pic"); + + if (np == NULL) { + printk(KERN_ERR "Could not find open-pic node\n"); + return; + } - mpic1 = mpic_alloc(OpenPIC_PAddr, + if (of_address_to_resource(np, 0, &r)) { + printk(KERN_ERR "Failed to map mpic register space\n"); + of_node_put(np); + return; + } + + mpic = mpic_alloc(np, r.start, MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, - 4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250, - mpc85xx_cds_openpic_initsenses, - sizeof(mpc85xx_cds_openpic_initsenses), " OpenPIC "); - BUG_ON(mpic1 == NULL); - mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200); - mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280); - mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10300); - mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10380); - mpic_assign_isu(mpic1, 4, OpenPIC_PAddr + 0x10400); - mpic_assign_isu(mpic1, 5, OpenPIC_PAddr + 0x10480); - mpic_assign_isu(mpic1, 6, OpenPIC_PAddr + 0x10500); - mpic_assign_isu(mpic1, 7, OpenPIC_PAddr + 0x10580); - - /* dummy mappings to get to 48 */ - mpic_assign_isu(mpic1, 8, OpenPIC_PAddr + 0x10600); - mpic_assign_isu(mpic1, 9, OpenPIC_PAddr + 0x10680); - mpic_assign_isu(mpic1, 10, OpenPIC_PAddr + 0x10700); - mpic_assign_isu(mpic1, 11, OpenPIC_PAddr + 0x10780); - - /* External ints */ - mpic_assign_isu(mpic1, 12, OpenPIC_PAddr + 0x10000); - mpic_assign_isu(mpic1, 13, OpenPIC_PAddr + 0x10080); - mpic_assign_isu(mpic1, 14, OpenPIC_PAddr + 0x10100); - - mpic_init(mpic1); + 4, 0, " OpenPIC "); + BUG_ON(mpic == NULL); + + /* Return the mpic node */ + of_node_put(np); + + mpic_assign_isu(mpic, 0, r.start + 0x10200); + mpic_assign_isu(mpic, 1, r.start + 0x10280); + mpic_assign_isu(mpic, 2, r.start + 0x10300); + mpic_assign_isu(mpic, 3, r.start + 0x10380); + mpic_assign_isu(mpic, 4, r.start + 0x10400); + mpic_assign_isu(mpic, 5, r.start + 0x10480); + mpic_assign_isu(mpic, 6, r.start + 0x10500); + mpic_assign_isu(mpic, 7, r.start + 0x10580); + + /* Used only for 8548 so far, but no harm in + * allocating them for everyone */ + mpic_assign_isu(mpic, 8, r.start + 0x10600); + mpic_assign_isu(mpic, 9, r.start + 0x10680); + mpic_assign_isu(mpic, 10, r.start + 0x10700); + mpic_assign_isu(mpic, 11, r.start + 0x10780); + + /* External Interrupts */ + mpic_assign_isu(mpic, 12, r.start + 0x10000); + mpic_assign_isu(mpic, 13, r.start + 0x10080); + mpic_assign_isu(mpic, 14, r.start + 0x10100); + + mpic_init(mpic); + +#ifdef CONFIG_PPC_I8259 + /* Initialize the i8259 controller */ + for_each_node_by_type(np, "interrupt-controller") + if (device_is_compatible(np, "chrp,iic")) { + cascade_node = np; + break; + } + + if (cascade_node == NULL) { + printk(KERN_DEBUG "Could not find i8259 PIC\n"); + return; + } -#ifdef CONFIG_PCI - mpic_setup_cascade(PIRQ0A, i8259_irq_cascade, NULL); + cascade_irq = irq_of_parse_and_map(cascade_node, 0); + if (cascade_irq == NO_IRQ) { + printk(KERN_ERR "Failed to map cascade interrupt\n"); + return; + } - i8259_init(0,0); -#endif + i8259_init(cascade_node, 0); + of_node_put(cascade_node); + + set_irq_chained_handler(cascade_irq, mpc85xx_8259_cascade); +#endif /* CONFIG_PPC_I8259 */ } @@ -298,8 +266,6 @@ mpc85xx_cds_setup_arch(void) add_bridge(np); ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup; - ppc_md.pci_swizzle = common_swizzle; - ppc_md.pci_map_irq = mpc85xx_map_irq; ppc_md.pci_exclude_device = mpc85xx_exclude_device; #endif diff --git a/arch/powerpc/platforms/86xx/mpc8641_hpcn.h b/arch/powerpc/platforms/86xx/mpc8641_hpcn.h index 5d2bcf78cef7..41e554c4af94 100644 --- a/arch/powerpc/platforms/86xx/mpc8641_hpcn.h +++ b/arch/powerpc/platforms/86xx/mpc8641_hpcn.h @@ -16,38 +16,6 @@ #include <linux/init.h> -/* PCI interrupt controller */ -#define PIRQA 3 -#define PIRQB 4 -#define PIRQC 5 -#define PIRQD 6 -#define PIRQ7 7 -#define PIRQE 9 -#define PIRQF 10 -#define PIRQG 11 -#define PIRQH 12 - -/* PCI-Express memory map */ -#define MPC86XX_PCIE_LOWER_IO 0x00000000 -#define MPC86XX_PCIE_UPPER_IO 0x00ffffff - -#define MPC86XX_PCIE_LOWER_MEM 0x80000000 -#define MPC86XX_PCIE_UPPER_MEM 0x9fffffff - -#define MPC86XX_PCIE_IO_BASE 0xe2000000 -#define MPC86XX_PCIE_MEM_OFFSET 0x00000000 - -#define MPC86XX_PCIE_IO_SIZE 0x01000000 - -#define PCIE1_CFG_ADDR_OFFSET (0x8000) -#define PCIE1_CFG_DATA_OFFSET (0x8004) - -#define PCIE2_CFG_ADDR_OFFSET (0x9000) -#define PCIE2_CFG_DATA_OFFSET (0x9004) - -#define MPC86xx_PCIE_OFFSET PCIE1_CFG_ADDR_OFFSET -#define MPC86xx_PCIE_SIZE (0x1000) - #define MPC86XX_RSTCR_OFFSET (0xe00b0) /* Reset Control Register */ #endif /* __MPC8641_HPCN_H__ */ diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index ebae73eb0063..146da3001c67 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -37,6 +37,14 @@ #include "mpc86xx.h" #include "mpc8641_hpcn.h" +#undef DEBUG + +#ifdef DEBUG +#define DBG(fmt...) do { printk(KERN_ERR fmt); } while(0) +#else +#define DBG(fmt...) do { } while(0) +#endif + #ifndef CONFIG_PCI unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; @@ -44,205 +52,215 @@ unsigned long pci_dram_offset = 0; #endif -/* - * Internal interrupts are all Level Sensitive, and Positive Polarity - */ - -static u_char mpc86xx_hpcn_openpic_initsenses[] __initdata = { - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 0: Reserved */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 1: MCM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 2: DDR DRAM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 8: PCIE1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 9: PCIE2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 10: Reserved */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 11: Reserved */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 12: DUART2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 1 Transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 1 Receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 15: TSEC 3 transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 16: TSEC 3 receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 17: TSEC 3 error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 1 Receive/Transmit Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 2 Transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 2 Receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 21: TSEC 4 transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 22: TSEC 4 receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 23: TSEC 4 error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 2 Receive/Transmit Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 25: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 26: DUART1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 28: Performance Monitor */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 30: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 32: SRIO error/write-port unit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 33: SRIO outbound doorbell */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 34: SRIO inbound doorbell */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 35: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 36: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 37: SRIO outbound message unit 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 38: SRIO inbound message unit 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 39: SRIO outbound message unit 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 40: SRIO inbound message unit 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 41: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 42: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 43: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 44: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 45: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 46: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 47: Unused */ - 0x0, /* External 0: */ - 0x0, /* External 1: */ - 0x0, /* External 2: */ - 0x0, /* External 3: */ - 0x0, /* External 4: */ - 0x0, /* External 5: */ - 0x0, /* External 6: */ - 0x0, /* External 7: */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 8: Pixis FPGA */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* External 9: ULI 8259 INTR Cascade */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 10: Quad ETH PHY */ - 0x0, /* External 11: */ - 0x0, - 0x0, - 0x0, - 0x0, -}; - +static void mpc86xx_8259_cascade(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs) +{ + unsigned int cascade_irq = i8259_irq(regs); + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq, regs); + desc->chip->eoi(irq); +} void __init mpc86xx_hpcn_init_irq(void) { struct mpic *mpic1; + struct device_node *np, *cascade_node = NULL; + int cascade_irq; phys_addr_t openpic_paddr; + np = of_find_node_by_type(NULL, "open-pic"); + if (np == NULL) + return; + /* Determine the Physical Address of the OpenPIC regs */ openpic_paddr = get_immrbase() + MPC86xx_OPENPIC_OFFSET; /* Alloc mpic structure and per isu has 16 INT entries. */ - mpic1 = mpic_alloc(openpic_paddr, + mpic1 = mpic_alloc(np, openpic_paddr, MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, - 16, MPC86xx_OPENPIC_IRQ_OFFSET, 0, 250, - mpc86xx_hpcn_openpic_initsenses, - sizeof(mpc86xx_hpcn_openpic_initsenses), + 16, NR_IRQS - 4, " MPIC "); BUG_ON(mpic1 == NULL); + mpic_assign_isu(mpic1, 0, openpic_paddr + 0x10000); + /* 48 Internal Interrupts */ - mpic_assign_isu(mpic1, 0, openpic_paddr + 0x10200); - mpic_assign_isu(mpic1, 1, openpic_paddr + 0x10400); - mpic_assign_isu(mpic1, 2, openpic_paddr + 0x10600); + mpic_assign_isu(mpic1, 1, openpic_paddr + 0x10200); + mpic_assign_isu(mpic1, 2, openpic_paddr + 0x10400); + mpic_assign_isu(mpic1, 3, openpic_paddr + 0x10600); - /* 16 External interrupts */ - mpic_assign_isu(mpic1, 3, openpic_paddr + 0x10000); + /* 16 External interrupts + * Moving them from [0 - 15] to [64 - 79] + */ + mpic_assign_isu(mpic1, 4, openpic_paddr + 0x10000); mpic_init(mpic1); #ifdef CONFIG_PCI - mpic_setup_cascade(MPC86xx_IRQ_EXT9, i8259_irq_cascade, NULL); - i8259_init(0, I8259_OFFSET); -#endif -} + /* Initialize i8259 controller */ + for_each_node_by_type(np, "interrupt-controller") + if (device_is_compatible(np, "chrp,iic")) { + cascade_node = np; + break; + } + if (cascade_node == NULL) { + printk(KERN_DEBUG "mpc86xxhpcn: no ISA interrupt controller\n"); + return; + } + cascade_irq = irq_of_parse_and_map(cascade_node, 0); + if (cascade_irq == NO_IRQ) { + printk(KERN_ERR "mpc86xxhpcn: failed to map cascade interrupt"); + return; + } + DBG("mpc86xxhpcn: cascade mapped to irq %d\n", cascade_irq); + i8259_init(cascade_node, 0); + set_irq_chained_handler(cascade_irq, mpc86xx_8259_cascade); +#endif +} #ifdef CONFIG_PCI -/* - * interrupt routing - */ -int -mpc86xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +enum pirq{PIRQA = 8, PIRQB, PIRQC, PIRQD, PIRQE, PIRQF, PIRQG, PIRQH}; +const unsigned char uli1575_irq_route_table[16] = { + 0, /* 0: Reserved */ + 0x8, /* 1: 0b1000 */ + 0, /* 2: Reserved */ + 0x2, /* 3: 0b0010 */ + 0x4, /* 4: 0b0100 */ + 0x5, /* 5: 0b0101 */ + 0x7, /* 6: 0b0111 */ + 0x6, /* 7: 0b0110 */ + 0, /* 8: Reserved */ + 0x1, /* 9: 0b0001 */ + 0x3, /* 10: 0b0011 */ + 0x9, /* 11: 0b1001 */ + 0xb, /* 12: 0b1011 */ + 0, /* 13: Reserved */ + 0xd, /* 14, 0b1101 */ + 0xf, /* 15, 0b1111 */ +}; + +static int __devinit +get_pci_irq_from_of(struct pci_controller *hose, int slot, int pin) { - static char pci_irq_table[][4] = { - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 17 -- PCI Slot 1 */ - {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 18 -- PCI Slot 2 */ - {0, 0, 0, 0}, /* IDSEL 19 */ - {0, 0, 0, 0}, /* IDSEL 20 */ - {0, 0, 0, 0}, /* IDSEL 21 */ - {0, 0, 0, 0}, /* IDSEL 22 */ - {0, 0, 0, 0}, /* IDSEL 23 */ - {0, 0, 0, 0}, /* IDSEL 24 */ - {0, 0, 0, 0}, /* IDSEL 25 */ - {PIRQD, PIRQA, PIRQB, PIRQC}, /* IDSEL 26 -- PCI Bridge*/ - {PIRQC, 0, 0, 0}, /* IDSEL 27 -- LAN */ - {PIRQE, PIRQF, PIRQH, PIRQ7}, /* IDSEL 28 -- USB 1.1 */ - {PIRQE, PIRQF, PIRQG, 0}, /* IDSEL 29 -- Audio & Modem */ - {PIRQH, 0, 0, 0}, /* IDSEL 30 -- LPC & PMU*/ - {PIRQD, 0, 0, 0}, /* IDSEL 31 -- ATA */ - }; - - const long min_idsel = 17, max_idsel = 31, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP + I8259_OFFSET; + struct of_irq oirq; + u32 laddr[3]; + struct device_node *hosenode = hose ? hose->arch_data : NULL; + + if (!hosenode) return -EINVAL; + + laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(slot, 0) << 8); + laddr[1] = laddr[2] = 0; + of_irq_map_raw(hosenode, &pin, laddr, &oirq); + DBG("mpc86xx_hpcn: pci irq addr %x, slot %d, pin %d, irq %d\n", + laddr[0], slot, pin, oirq.specifier[0]); + return oirq.specifier[0]; } -static void __devinit quirk_ali1575(struct pci_dev *dev) +static void __devinit quirk_uli1575(struct pci_dev *dev) { unsigned short temp; + struct pci_controller *hose = pci_bus_to_host(dev->bus); + unsigned char irq2pin[16]; + unsigned long pirq_map_word = 0; + u32 irq; + int i; /* - * ALI1575 interrupts route table setup: + * ULI1575 interrupts route setup + */ + memset(irq2pin, 0, 16); /* Initialize default value 0 */ + + /* + * PIRQA -> PIRQD mapping read from OF-tree + * + * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD + * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA + */ + for (i = 0; i < 4; i++){ + irq = get_pci_irq_from_of(hose, 17, i + 1); + if (irq > 0 && irq < 16) + irq2pin[irq] = PIRQA + i; + else + printk(KERN_WARNING "ULI1575 device" + "(slot %d, pin %d) irq %d is invalid.\n", + 17, i, irq); + } + + /* + * PIRQE -> PIRQF mapping set manually * * IRQ pin IRQ# - * PIRQA ---- 3 - * PIRQB ---- 4 - * PIRQC ---- 5 - * PIRQD ---- 6 * PIRQE ---- 9 * PIRQF ---- 10 * PIRQG ---- 11 * PIRQH ---- 12 - * - * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD - * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA */ - pci_write_config_dword(dev, 0x48, 0xb9317542); + for (i = 0; i < 4; i++) irq2pin[i + 9] = PIRQE + i; + + /* Set IRQ-PIRQ Mapping to ULI1575 */ + for (i = 0; i < 16; i++) + if (irq2pin[i]) + pirq_map_word |= (uli1575_irq_route_table[i] & 0xf) + << ((irq2pin[i] - PIRQA) * 4); - /* USB 1.1 OHCI controller 1, interrupt: PIRQE */ - pci_write_config_byte(dev, 0x86, 0x0c); + /* ULI1575 IRQ mapping conf register default value is 0xb9317542 */ + DBG("Setup ULI1575 IRQ mapping configuration register value = 0x%x\n", + pirq_map_word); + pci_write_config_dword(dev, 0x48, pirq_map_word); - /* USB 1.1 OHCI controller 2, interrupt: PIRQF */ - pci_write_config_byte(dev, 0x87, 0x0d); +#define ULI1575_SET_DEV_IRQ(slot, pin, reg) \ + do { \ + int irq; \ + irq = get_pci_irq_from_of(hose, slot, pin); \ + if (irq > 0 && irq < 16) \ + pci_write_config_byte(dev, reg, irq2pin[irq]); \ + else \ + printk(KERN_WARNING "ULI1575 device" \ + "(slot %d, pin %d) irq %d is invalid.\n", \ + slot, pin, irq); \ + } while(0) - /* USB 1.1 OHCI controller 3, interrupt: PIRQH */ - pci_write_config_byte(dev, 0x88, 0x0f); + /* USB 1.1 OHCI controller 1, slot 28, pin 1 */ + ULI1575_SET_DEV_IRQ(28, 1, 0x86); - /* USB 2.0 controller, interrupt: PIRQ7 */ - pci_write_config_byte(dev, 0x74, 0x06); + /* USB 1.1 OHCI controller 2, slot 28, pin 2 */ + ULI1575_SET_DEV_IRQ(28, 2, 0x87); - /* Audio controller, interrupt: PIRQE */ - pci_write_config_byte(dev, 0x8a, 0x0c); + /* USB 1.1 OHCI controller 3, slot 28, pin 3 */ + ULI1575_SET_DEV_IRQ(28, 3, 0x88); - /* Modem controller, interrupt: PIRQF */ - pci_write_config_byte(dev, 0x8b, 0x0d); + /* USB 2.0 controller, slot 28, pin 4 */ + irq = get_pci_irq_from_of(hose, 28, 4); + if (irq >= 0 && irq <=15) + pci_write_config_dword(dev, 0x74, uli1575_irq_route_table[irq]); - /* HD audio controller, interrupt: PIRQG */ - pci_write_config_byte(dev, 0x8c, 0x0e); + /* Audio controller, slot 29, pin 1 */ + ULI1575_SET_DEV_IRQ(29, 1, 0x8a); - /* Serial ATA interrupt: PIRQD */ - pci_write_config_byte(dev, 0x8d, 0x0b); + /* Modem controller, slot 29, pin 2 */ + ULI1575_SET_DEV_IRQ(29, 2, 0x8b); - /* SMB interrupt: PIRQH */ - pci_write_config_byte(dev, 0x8e, 0x0f); + /* HD audio controller, slot 29, pin 3 */ + ULI1575_SET_DEV_IRQ(29, 3, 0x8c); - /* PMU ACPI SCI interrupt: PIRQH */ - pci_write_config_byte(dev, 0x8f, 0x0f); + /* SMB interrupt: slot 30, pin 1 */ + ULI1575_SET_DEV_IRQ(30, 1, 0x8e); + + /* PMU ACPI SCI interrupt: slot 30, pin 2 */ + ULI1575_SET_DEV_IRQ(30, 2, 0x8f); + + /* Serial ATA interrupt: slot 31, pin 1 */ + ULI1575_SET_DEV_IRQ(31, 1, 0x8d); /* Primary PATA IDE IRQ: 14 * Secondary PATA IDE IRQ: 15 */ - pci_write_config_byte(dev, 0x44, 0x3d); - pci_write_config_byte(dev, 0x75, 0x0f); + pci_write_config_byte(dev, 0x44, 0x30 | uli1575_irq_route_table[14]); + pci_write_config_byte(dev, 0x75, uli1575_irq_route_table[15]); /* Set IRQ14 and IRQ15 to legacy IRQs */ pci_read_config_word(dev, 0x46, &temp); @@ -264,6 +282,8 @@ static void __devinit quirk_ali1575(struct pci_dev *dev) */ outb(0xfa, 0x4d0); outb(0x1e, 0x4d1); + +#undef ULI1575_SET_DEV_IRQ } static void __devinit quirk_uli5288(struct pci_dev *dev) @@ -306,7 +326,7 @@ static void __devinit early_uli5249(struct pci_dev *dev) dev->class |= 0x1; } -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_ali1575); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249); @@ -337,8 +357,6 @@ mpc86xx_hpcn_setup_arch(void) for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); - ppc_md.pci_swizzle = common_swizzle; - ppc_md.pci_map_irq = mpc86xx_map_irq; ppc_md.pci_exclude_device = mpc86xx_exclude_device; #endif @@ -377,6 +395,15 @@ mpc86xx_hpcn_show_cpuinfo(struct seq_file *m) } +void __init mpc86xx_hpcn_pcibios_fixup(void) +{ + struct pci_dev *dev = NULL; + + for_each_pci_dev(dev) + pci_read_irq_line(dev); +} + + /* * Called very early, device-tree isn't unflattened */ @@ -431,6 +458,7 @@ define_machine(mpc86xx_hpcn) { .setup_arch = mpc86xx_hpcn_setup_arch, .init_IRQ = mpc86xx_hpcn_init_irq, .show_cpuinfo = mpc86xx_hpcn_show_cpuinfo, + .pcibios_fixup = mpc86xx_hpcn_pcibios_fixup, .get_irq = mpic_get_irq, .restart = mpc86xx_restart, .time_init = mpc86xx_time_init, diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index 538e337d63e2..9c08ff322290 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -291,10 +291,6 @@ void __init chrp_setup_arch(void) pci_create_OF_bus_map(); -#ifdef CONFIG_SMP - smp_ops = &chrp_smp_ops; -#endif /* CONFIG_SMP */ - /* * Print the banner, then scroll down so boot progress * can be printed. -- Cort @@ -479,6 +475,14 @@ void __init chrp_init_IRQ(void) chrp_find_openpic(); chrp_find_8259(); +#ifdef CONFIG_SMP + /* Pegasos has no MPIC, those ops would make it crash. It might be an + * option to move setting them to after we probe the PIC though + */ + if (chrp_mpic != NULL) + smp_ops = &chrp_smp_ops; +#endif /* CONFIG_SMP */ + if (_chrp_type == _CHRP_Pegasos) ppc_md.get_irq = i8259_irq; diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c index d7a4fc7ca238..ed00ed2455dd 100644 --- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c +++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c @@ -1,7 +1,7 @@ /* * mpc7448_hpc2.c * - * Board setup routines for the Freescale Taiga platform + * Board setup routines for the Freescale mpc7448hpc2(taiga) platform * * Author: Jacob Pan * jacob.pan@freescale.com @@ -12,10 +12,10 @@ * * Copyright 2004-2006 Freescale Semiconductor, Inc. * - * This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. */ #include <linux/config.h> @@ -62,43 +62,8 @@ pci_dram_offset = MPC7448_HPC2_PCI_MEM_OFFSET; extern int tsi108_setup_pci(struct device_node *dev); extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val); extern void tsi108_pci_int_init(void); -extern int tsi108_irq_cascade(struct pt_regs *regs, void *unused); - -/* - * Define all of the IRQ senses and polarities. Taken from the - * mpc7448hpc manual. - * Note: Likely, this table and the following function should be - * obtained and derived from the OF Device Tree. - */ - -static u_char mpc7448_hpc2_pic_initsenses[] __initdata = { - /* External on-board sources */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[0] XINT0 from FPGA */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[1] XINT1 from FPGA */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[2] PHY_INT from both GIGE */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[3] RESERVED */ - /* Internal Tsi108/109 interrupt sources */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA0 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA1 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA2 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA3 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART0 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART1 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* I2C */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* GPIO */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE1 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* HLP */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* SDC */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Processor IF */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* PCI/X block */ -}; +extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs); int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn) { @@ -229,6 +194,8 @@ static void __init mpc7448_hpc2_init_IRQ(void) { struct mpic *mpic; phys_addr_t mpic_paddr = 0; + unsigned int cascade_pci_irq; + struct device_node *tsi_pci; struct device_node *tsi_pic; tsi_pic = of_find_node_by_type(NULL, "open-pic"); @@ -246,24 +213,31 @@ static void __init mpc7448_hpc2_init_IRQ(void) DBG("%s: tsi108pic phys_addr = 0x%x\n", __FUNCTION__, (u32) mpic_paddr); - mpic = mpic_alloc(mpic_paddr, + mpic = mpic_alloc(tsi_pic, mpic_paddr, MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET | MPIC_SPV_EOI | MPIC_MOD_ID(MPIC_ID_TSI108), 0, /* num_sources used */ - TSI108_IRQ_BASE, 0, /* num_sources used */ - NR_IRQS - 4 /* XXXX */, - mpc7448_hpc2_pic_initsenses, - sizeof(mpc7448_hpc2_pic_initsenses), "Tsi108_PIC"); + "Tsi108_PIC"); BUG_ON(mpic == NULL); /* XXXX */ - mpic_init(mpic); - mpic_setup_cascade(IRQ_TSI108_PCI, tsi108_irq_cascade, mpic); + + tsi_pci = of_find_node_by_type(NULL, "pci"); + if (tsi_pci == 0) { + printk("%s: No tsi108 pci node found !\n", __FUNCTION__); + return; + } + + cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0); + set_irq_data(cascade_pci_irq, mpic); + set_irq_chained_handler(cascade_pci_irq, tsi108_irq_cascade); + tsi108_pci_int_init(); /* Configure MPIC outputs to CPU0 */ tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0); + of_node_put(tsi_pic); } void mpc7448_hpc2_show_cpuinfo(struct seq_file *m) @@ -320,6 +294,7 @@ static int mpc7448_machine_check_exception(struct pt_regs *regs) return 0; } + define_machine(mpc7448_hpc2){ .name = "MPC7448 HPC2", .probe = mpc7448_hpc2_probe, diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c index cb528c9de4c3..57567dfb9819 100644 --- a/arch/powerpc/platforms/maple/setup.c +++ b/arch/powerpc/platforms/maple/setup.c @@ -221,10 +221,17 @@ static void __init maple_init_IRQ(void) * in Maple device-tree where the type of the controller is * open-pic and not interrupt-controller */ - for_each_node_by_type(np, "open-pic") { - mpic_node = np; - break; - } + + for_each_node_by_type(np, "interrupt-controller") + if (device_is_compatible(np, "open-pic")) { + mpic_node = np; + break; + } + if (mpic_node == NULL) + for_each_node_by_type(np, "open-pic") { + mpic_node = np; + break; + } if (mpic_node == NULL) { printk(KERN_ERR "Failed to locate the MPIC interrupt controller\n"); @@ -252,6 +259,8 @@ static void __init maple_init_IRQ(void) /* XXX Maple specific bits */ flags |= MPIC_BROKEN_U3 | MPIC_WANTS_RESET; + /* All U3/U4 are big-endian, older SLOF firmware doesn't encode this */ + flags |= MPIC_BIG_ENDIAN; /* Setup the openpic driver. More device-tree junks, we hard code no * ISUs for now. I'll have to revisit some stuffs with the folks doing diff --git a/arch/powerpc/platforms/powermac/backlight.c b/arch/powerpc/platforms/powermac/backlight.c index 74eed6b74cd6..d66415491055 100644 --- a/arch/powerpc/platforms/powermac/backlight.c +++ b/arch/powerpc/platforms/powermac/backlight.c @@ -10,19 +10,32 @@ #include <linux/kernel.h> #include <linux/fb.h> #include <linux/backlight.h> +#include <linux/adb.h> +#include <linux/pmu.h> +#include <asm/atomic.h> #include <asm/prom.h> #include <asm/backlight.h> #define OLD_BACKLIGHT_MAX 15 static void pmac_backlight_key_worker(void *data); +static void pmac_backlight_set_legacy_worker(void *data); + static DECLARE_WORK(pmac_backlight_key_work, pmac_backlight_key_worker, NULL); +static DECLARE_WORK(pmac_backlight_set_legacy_work, pmac_backlight_set_legacy_worker, NULL); -/* Although this variable is used in interrupt context, it makes no sense to - * protect it. No user is able to produce enough key events per second and +/* Although these variables are used in interrupt context, it makes no sense to + * protect them. No user is able to produce enough key events per second and * notice the errors that might happen. */ static int pmac_backlight_key_queued; +static int pmac_backlight_set_legacy_queued; + +/* The via-pmu code allows the backlight to be grabbed, in which case the + * in-kernel control of the brightness needs to be disabled. This should + * only be used by really old PowerBooks. + */ +static atomic_t kernel_backlight_disabled = ATOMIC_INIT(0); /* Protect the pmac_backlight variable */ DEFINE_MUTEX(pmac_backlight_mutex); @@ -82,6 +95,9 @@ int pmac_backlight_curve_lookup(struct fb_info *info, int value) static void pmac_backlight_key_worker(void *data) { + if (atomic_read(&kernel_backlight_disabled)) + return; + mutex_lock(&pmac_backlight_mutex); if (pmac_backlight) { struct backlight_properties *props; @@ -107,8 +123,12 @@ static void pmac_backlight_key_worker(void *data) mutex_unlock(&pmac_backlight_mutex); } +/* This function is called in interrupt context */ void pmac_backlight_key(int direction) { + if (atomic_read(&kernel_backlight_disabled)) + return; + /* we can receive multiple interrupts here, but the scheduled work * will run only once, with the last value */ @@ -116,7 +136,7 @@ void pmac_backlight_key(int direction) schedule_work(&pmac_backlight_key_work); } -int pmac_backlight_set_legacy_brightness(int brightness) +static int __pmac_backlight_set_legacy_brightness(int brightness) { int error = -ENXIO; @@ -145,6 +165,28 @@ int pmac_backlight_set_legacy_brightness(int brightness) return error; } +static void pmac_backlight_set_legacy_worker(void *data) +{ + if (atomic_read(&kernel_backlight_disabled)) + return; + + __pmac_backlight_set_legacy_brightness(pmac_backlight_set_legacy_queued); +} + +/* This function is called in interrupt context */ +void pmac_backlight_set_legacy_brightness_pmu(int brightness) { + if (atomic_read(&kernel_backlight_disabled)) + return; + + pmac_backlight_set_legacy_queued = brightness; + schedule_work(&pmac_backlight_set_legacy_work); +} + +int pmac_backlight_set_legacy_brightness(int brightness) +{ + return __pmac_backlight_set_legacy_brightness(brightness); +} + int pmac_backlight_get_legacy_brightness() { int result = -ENXIO; @@ -167,6 +209,16 @@ int pmac_backlight_get_legacy_brightness() return result; } +void pmac_backlight_disable() +{ + atomic_inc(&kernel_backlight_disabled); +} + +void pmac_backlight_enable() +{ + atomic_dec(&kernel_backlight_disabled); +} + EXPORT_SYMBOL_GPL(pmac_backlight); EXPORT_SYMBOL_GPL(pmac_backlight_mutex); EXPORT_SYMBOL_GPL(pmac_has_backlight_type); diff --git a/arch/powerpc/platforms/powermac/bootx_init.c b/arch/powerpc/platforms/powermac/bootx_init.c index 871b002c9f90..9d73d0234c5d 100644 --- a/arch/powerpc/platforms/powermac/bootx_init.c +++ b/arch/powerpc/platforms/powermac/bootx_init.c @@ -181,13 +181,18 @@ static void __init bootx_add_chosen_props(unsigned long base, } static void __init bootx_add_display_props(unsigned long base, - unsigned long *mem_end) + unsigned long *mem_end, + int has_real_node) { boot_infos_t *bi = bootx_info; u32 tmp; - bootx_dt_add_prop("linux,boot-display", NULL, 0, mem_end); - bootx_dt_add_prop("linux,opened", NULL, 0, mem_end); + if (has_real_node) { + bootx_dt_add_prop("linux,boot-display", NULL, 0, mem_end); + bootx_dt_add_prop("linux,opened", NULL, 0, mem_end); + } else + bootx_dt_add_prop("linux,bootx-noscreen", NULL, 0, mem_end); + tmp = bi->dispDeviceDepth; bootx_dt_add_prop("linux,bootx-depth", &tmp, 4, mem_end); tmp = bi->dispDeviceRect[2] - bi->dispDeviceRect[0]; @@ -241,11 +246,6 @@ static void __init bootx_scan_dt_build_strings(unsigned long base, DBG(" detected display ! adding properties names !\n"); bootx_dt_add_string("linux,boot-display", mem_end); bootx_dt_add_string("linux,opened", mem_end); - bootx_dt_add_string("linux,bootx-depth", mem_end); - bootx_dt_add_string("linux,bootx-width", mem_end); - bootx_dt_add_string("linux,bootx-height", mem_end); - bootx_dt_add_string("linux,bootx-linebytes", mem_end); - bootx_dt_add_string("linux,bootx-addr", mem_end); strncpy(bootx_disp_path, namep, 255); } @@ -329,10 +329,13 @@ static void __init bootx_scan_dt_build_struct(unsigned long base, ppp = &pp->next; } - if (node == bootx_node_chosen) + if (node == bootx_node_chosen) { bootx_add_chosen_props(base, mem_end); - if (node == bootx_info->dispDeviceRegEntryOffset) - bootx_add_display_props(base, mem_end); + if (bootx_info->dispDeviceRegEntryOffset == 0) + bootx_add_display_props(base, mem_end, 0); + } + else if (node == bootx_info->dispDeviceRegEntryOffset) + bootx_add_display_props(base, mem_end, 1); /* do all our children */ cpp = &np->child; @@ -374,6 +377,14 @@ static unsigned long __init bootx_flatten_dt(unsigned long start) mem_end += 4; bootx_dt_strend = mem_end; bootx_scan_dt_build_strings(base, 4, &mem_end); + /* Add some strings */ + bootx_dt_add_string("linux,bootx-noscreen", &mem_end); + bootx_dt_add_string("linux,bootx-depth", &mem_end); + bootx_dt_add_string("linux,bootx-width", &mem_end); + bootx_dt_add_string("linux,bootx-height", &mem_end); + bootx_dt_add_string("linux,bootx-linebytes", &mem_end); + bootx_dt_add_string("linux,bootx-addr", &mem_end); + /* Wrap up strings */ hdr->off_dt_strings = bootx_dt_strbase - mem_start; hdr->dt_strings_size = bootx_dt_strend - bootx_dt_strbase; @@ -400,8 +411,15 @@ static unsigned long __init bootx_flatten_dt(unsigned long start) DBG("End of boot params: %x\n", mem_end); rsvmap[0] = mem_start; rsvmap[1] = mem_end; - rsvmap[2] = 0; - rsvmap[3] = 0; + if (bootx_info->ramDisk) { + rsvmap[2] = ((unsigned long)bootx_info) + bootx_info->ramDisk; + rsvmap[3] = rsvmap[2] + bootx_info->ramDiskSize; + rsvmap[4] = 0; + rsvmap[5] = 0; + } else { + rsvmap[2] = 0; + rsvmap[3] = 0; + } return (unsigned long)hdr; } @@ -471,6 +489,7 @@ void __init bootx_init(unsigned long r3, unsigned long r4) if (bi->dispDeviceDepth == 16) bi->dispDeviceDepth = 15; + #ifdef CONFIG_BOOTX_TEXT ptr = (unsigned long)bi->logicalDisplayBase; ptr += bi->dispDeviceRect[1] * bi->dispDeviceRowBytes; @@ -508,6 +527,7 @@ void __init bootx_init(unsigned long r3, unsigned long r4) #ifdef CONFIG_BOOTX_TEXT btext_welcome(bi); #endif + /* New BootX enters kernel with MMU off, i/os are not allowed * here. This hack will have been done by the boostrap anyway. */ @@ -530,12 +550,12 @@ void __init bootx_init(unsigned long r3, unsigned long r4) */ if (bi->version < 5) { space = bi->deviceTreeOffset + bi->deviceTreeSize; - if (bi->ramDisk) + if (bi->ramDisk >= space) space = bi->ramDisk + bi->ramDiskSize; } else space = bi->totalParamsSize; - bootx_printf("Total space used by parameters & ramdisk: %x \n", space); + bootx_printf("Total space used by parameters & ramdisk: 0x%x \n", space); /* New BootX will have flushed all TLBs and enters kernel with * MMU switched OFF, so this should not be useful anymore. diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c index f08a14516139..7b1156ea5341 100644 --- a/arch/powerpc/platforms/powermac/cpufreq_64.c +++ b/arch/powerpc/platforms/powermac/cpufreq_64.c @@ -10,6 +10,8 @@ * that is iMac G5 and latest single CPU desktop. */ +#undef DEBUG + #include <linux/module.h> #include <linux/types.h> #include <linux/errno.h> @@ -30,13 +32,7 @@ #include <asm/smu.h> #include <asm/pmac_pfunc.h> -#undef DEBUG - -#ifdef DEBUG -#define DBG(fmt...) printk(fmt) -#else -#define DBG(fmt...) -#endif +#define DBG(fmt...) pr_debug(fmt) /* see 970FX user manual */ @@ -82,8 +78,6 @@ static struct freq_attr* g5_cpu_freqs_attr[] = { /* Power mode data is an array of the 32 bits PCR values to use for * the various frequencies, retrieved from the device-tree */ -static u32 *g5_pmode_data; -static int g5_pmode_max; static int g5_pmode_cur; static void (*g5_switch_volt)(int speed_mode); @@ -93,6 +87,11 @@ static int (*g5_query_freq)(void); static DEFINE_MUTEX(g5_switch_mutex); +#ifdef CONFIG_PMAC_SMU + +static u32 *g5_pmode_data; +static int g5_pmode_max; + static struct smu_sdbp_fvt *g5_fvt_table; /* table of op. points */ static int g5_fvt_count; /* number of op. points */ static int g5_fvt_cur; /* current op. point */ @@ -210,6 +209,16 @@ static int g5_scom_query_freq(void) } /* + * Fake voltage switching for platforms with missing support + */ + +static void g5_dummy_switch_volt(int speed_mode) +{ +} + +#endif /* CONFIG_PMAC_SMU */ + +/* * Platform function based voltage switching for PowerMac7,2 & 7,3 */ @@ -248,6 +257,9 @@ static int g5_pfunc_switch_freq(int speed_mode) struct pmf_args args; u32 done = 0; unsigned long timeout; + int rc; + + DBG("g5_pfunc_switch_freq(%d)\n", speed_mode); /* If frequency is going up, first ramp up the voltage */ if (speed_mode < g5_pmode_cur) @@ -255,9 +267,12 @@ static int g5_pfunc_switch_freq(int speed_mode) /* Do it */ if (speed_mode == CPUFREQ_HIGH) - pmf_call_one(pfunc_cpu_setfreq_high, NULL); + rc = pmf_call_one(pfunc_cpu_setfreq_high, NULL); else - pmf_call_one(pfunc_cpu_setfreq_low, NULL); + rc = pmf_call_one(pfunc_cpu_setfreq_low, NULL); + + if (rc) + printk(KERN_WARNING "cpufreq: pfunc switch error %d\n", rc); /* It's an irq GPIO so we should be able to just block here, * I'll do that later after I've properly tested the IRQ code for @@ -296,13 +311,6 @@ static int g5_pfunc_query_freq(void) return val ? CPUFREQ_HIGH : CPUFREQ_LOW; } -/* - * Fake voltage switching for platforms with missing support - */ - -static void g5_dummy_switch_volt(int speed_mode) -{ -} /* * Common interface to the cpufreq core @@ -375,6 +383,8 @@ static struct cpufreq_driver g5_cpufreq_driver = { }; +#ifdef CONFIG_PMAC_SMU + static int __init g5_neo2_cpufreq_init(struct device_node *cpus) { struct device_node *cpunode; @@ -525,6 +535,9 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpus) return rc; } +#endif /* CONFIG_PMAC_SMU */ + + static int __init g5_pm72_cpufreq_init(struct device_node *cpus) { struct device_node *cpuid = NULL, *hwclock = NULL, *cpunode = NULL; @@ -533,6 +546,9 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpus) u64 max_freq, min_freq, ih, il; int has_volt = 1, rc = 0; + DBG("cpufreq: Initializing for PowerMac7,2, PowerMac7,3 and" + " RackMac3,1...\n"); + /* Get first CPU node */ for (cpunode = NULL; (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) { @@ -636,6 +652,15 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpus) */ ih = *((u32 *)(eeprom + 0x10)); il = *((u32 *)(eeprom + 0x20)); + + /* Check for machines with no useful settings */ + if (il == ih) { + printk(KERN_WARNING "cpufreq: No low frequency mode available" + " on this model !\n"); + rc = -ENODEV; + goto bail; + } + min_freq = 0; if (ih != 0 && il != 0) min_freq = (max_freq * il) / ih; @@ -643,7 +668,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpus) /* Sanity check */ if (min_freq >= max_freq || min_freq < 1000) { printk(KERN_ERR "cpufreq: Can't calculate low frequency !\n"); - rc = -ENODEV; + rc = -ENXIO; goto bail; } g5_cpu_freqs[0].frequency = max_freq; @@ -690,16 +715,10 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpus) return rc; } -static int __init g5_rm31_cpufreq_init(struct device_node *cpus) -{ - /* NYI */ - return 0; -} - static int __init g5_cpufreq_init(void) { struct device_node *cpus; - int rc; + int rc = 0; cpus = of_find_node_by_path("/cpus"); if (cpus == NULL) { @@ -708,12 +727,13 @@ static int __init g5_cpufreq_init(void) } if (machine_is_compatible("PowerMac7,2") || - machine_is_compatible("PowerMac7,3")) + machine_is_compatible("PowerMac7,3") || + machine_is_compatible("RackMac3,1")) rc = g5_pm72_cpufreq_init(cpus); - else if (machine_is_compatible("RackMac3,1")) - rc = g5_rm31_cpufreq_init(cpus); +#ifdef CONFIG_PMAC_SMU else rc = g5_neo2_cpufreq_init(cpus); +#endif /* CONFIG_PMAC_SMU */ of_node_put(cpus); return rc; diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 54a52437265c..31867a701fcb 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -213,8 +213,6 @@ static void pseries_lpar_enable_pmcs(void) { unsigned long set, reset; - power4_enable_pmcs(); - set = 1UL << 63; reset = 0; plpar_hcall_norets(H_PERFMON, set, reset); @@ -501,7 +499,8 @@ static void pseries_dedicated_idle_sleep(void) } /* - * Cede if the other thread is not idle, so that it can + * If not SMT, cede processor. If CPU is running SMT + * cede if the other thread is not idle, so that it can * go single-threaded. If the other thread is idle, * we ask the hypervisor if it has pending work it * wants to do and cede if it does. Otherwise we keep @@ -514,7 +513,8 @@ static void pseries_dedicated_idle_sleep(void) * very low priority. The cede enables interrupts, which * doesn't matter here. */ - if (!lppaca[cpu ^ 1].idle || poll_pending() == H_PENDING) + if (!cpu_has_feature(CPU_FTR_SMT) || !lppaca[cpu ^ 1].idle + || poll_pending() == H_PENDING) cede_processor(); out: diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index 2d0da6f9e244..e98863025721 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -467,7 +467,7 @@ void xics_setup_cpu(void) * * XXX: undo of teardown on kexec needs this too, as may hotplug */ - rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE, + rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE, (1UL << interrupt_server_size) - 1 - default_distrib_server, 1); } @@ -796,7 +796,7 @@ void xics_teardown_cpu(int secondary) * so leave the master cpu in the group. */ if (secondary) - rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE, + rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE, (1UL << interrupt_server_size) - 1 - default_distrib_server, 0); } @@ -813,7 +813,7 @@ void xics_migrate_irqs_away(void) xics_set_cpu_priority(cpu, 0); /* remove ourselves from the global interrupt queue */ - status = rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE, + status = rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE, (1UL << interrupt_server_size) - 1 - default_distrib_server, 0); WARN_ON(status < 0); diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index e983972132d8..ef10bcf2d943 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -85,11 +85,8 @@ static int __init gfar_mdio_of_init(void) mdio_data.irq[k] = -1; while ((child = of_get_next_child(np, child)) != NULL) { - if (child->n_intrs) { - u32 *id = - (u32 *) get_property(child, "reg", NULL); - mdio_data.irq[*id] = child->intrs[0].line; - } + u32 *id = get_property(child, "reg", NULL); + mdio_data.irq[*id] = irq_of_parse_and_map(child, 0); } ret = @@ -131,6 +128,7 @@ static int __init gfar_of_init(void) char *model; void *mac_addr; phandle *ph; + int n_res = 1; memset(r, 0, sizeof(r)); memset(&gfar_data, 0, sizeof(gfar_data)); @@ -139,8 +137,7 @@ static int __init gfar_of_init(void) if (ret) goto err; - r[1].start = np->intrs[0].line; - r[1].end = np->intrs[0].line; + r[1].start = r[1].end = irq_of_parse_and_map(np, 0); r[1].flags = IORESOURCE_IRQ; model = get_property(np, "model", NULL); @@ -150,27 +147,35 @@ static int __init gfar_of_init(void) r[1].name = gfar_tx_intr; r[2].name = gfar_rx_intr; - r[2].start = np->intrs[1].line; - r[2].end = np->intrs[1].line; + r[2].start = r[2].end = irq_of_parse_and_map(np, 1); r[2].flags = IORESOURCE_IRQ; r[3].name = gfar_err_intr; - r[3].start = np->intrs[2].line; - r[3].end = np->intrs[2].line; + r[3].start = r[3].end = irq_of_parse_and_map(np, 2); r[3].flags = IORESOURCE_IRQ; + + n_res += 2; } gfar_dev = platform_device_register_simple("fsl-gianfar", i, &r[0], - np->n_intrs + 1); + n_res + 1); if (IS_ERR(gfar_dev)) { ret = PTR_ERR(gfar_dev); goto err; } - mac_addr = get_property(np, "address", NULL); - memcpy(gfar_data.mac_addr, mac_addr, 6); + mac_addr = get_property(np, "local-mac-address", NULL); + if (mac_addr == NULL) + mac_addr = get_property(np, "mac-address", NULL); + if (mac_addr == NULL) { + /* Obsolete */ + mac_addr = get_property(np, "address", NULL); + } + + if (mac_addr) + memcpy(gfar_data.mac_addr, mac_addr, 6); if (model && !strcasecmp(model, "TSEC")) gfar_data.device_flags = @@ -251,8 +256,7 @@ static int __init fsl_i2c_of_init(void) if (ret) goto err; - r[1].start = np->intrs[0].line; - r[1].end = np->intrs[0].line; + r[1].start = r[1].end = irq_of_parse_and_map(np, 0); r[1].flags = IORESOURCE_IRQ; i2c_dev = platform_device_register_simple("fsl-i2c", i, r, 2); @@ -388,8 +392,7 @@ static int __init fsl_usb_of_init(void) if (ret) goto err; - r[1].start = np->intrs[0].line; - r[1].end = np->intrs[0].line; + r[1].start = r[1].end = irq_of_parse_and_map(np, 0); r[1].flags = IORESOURCE_IRQ; usb_dev_mph = @@ -437,8 +440,7 @@ static int __init fsl_usb_of_init(void) if (ret) goto unreg_mph; - r[1].start = np->intrs[0].line; - r[1].end = np->intrs[0].line; + r[1].start = r[1].end = irq_of_parse_and_map(np, 0); r[1].flags = IORESOURCE_IRQ; usb_dev_dr = diff --git a/arch/powerpc/sysdev/tsi108_dev.c b/arch/powerpc/sysdev/tsi108_dev.c index 26a0cc820cde..f3038461d4c0 100644 --- a/arch/powerpc/sysdev/tsi108_dev.c +++ b/arch/powerpc/sysdev/tsi108_dev.c @@ -93,13 +93,15 @@ static int __init tsi108_eth_of_init(void) goto err; r[1].name = "tx"; - r[1].start = np->intrs[0].line; - r[1].end = np->intrs[0].line; + r[1].start = irq_of_parse_and_map(np, 0); + r[1].end = irq_of_parse_and_map(np, 0); r[1].flags = IORESOURCE_IRQ; + DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n", + __FUNCTION__,r[1].name, r[1].start, r[1].end); tsi_eth_dev = platform_device_register_simple("tsi-ethernet", i, &r[0], - np->n_intrs + 1); + 1); if (IS_ERR(tsi_eth_dev)) { ret = PTR_ERR(tsi_eth_dev); @@ -127,7 +129,7 @@ static int __init tsi108_eth_of_init(void) tsi_eth_data.regs = r[0].start; tsi_eth_data.phyregs = res.start; tsi_eth_data.phy = *phy_id; - tsi_eth_data.irq_num = np->intrs[0].line; + tsi_eth_data.irq_num = irq_of_parse_and_map(np, 0); of_node_put(phy); ret = platform_device_add_data(tsi_eth_dev, &tsi_eth_data, diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c index 3265d54c82ed..2ab06ed3ae73 100644 --- a/arch/powerpc/sysdev/tsi108_pci.c +++ b/arch/powerpc/sysdev/tsi108_pci.c @@ -26,7 +26,6 @@ #include <linux/irq.h> #include <linux/interrupt.h> - #include <asm/byteorder.h> #include <asm/io.h> #include <asm/irq.h> @@ -228,7 +227,7 @@ int __init tsi108_setup_pci(struct device_node *dev) (hose)->ops = &tsi108_direct_pci_ops; - printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08lx. " + printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08x. " "Firmware bus number: %d->%d\n", rsrc.start, hose->first_busno, hose->last_busno); @@ -278,7 +277,7 @@ static void init_pci_source(void) mb(); } -static inline int get_pci_source(void) +static inline unsigned int get_pci_source(void) { u_int temp = 0; int irq = -1; @@ -371,12 +370,12 @@ static void tsi108_pci_irq_end(u_int irq) * Interrupt controller descriptor for cascaded PCI interrupt controller. */ -struct hw_interrupt_type tsi108_pci_irq = { +static struct irq_chip tsi108_pci_irq = { .typename = "tsi108_PCI_int", - .enable = tsi108_pci_irq_enable, - .disable = tsi108_pci_irq_disable, + .mask = tsi108_pci_irq_disable, .ack = tsi108_pci_irq_ack, .end = tsi108_pci_irq_end, + .unmask = tsi108_pci_irq_enable, }; /* @@ -399,14 +398,18 @@ void __init tsi108_pci_int_init(void) DBG("Tsi108_pci_int_init: initializing PCI interrupts\n"); for (i = 0; i < NUM_PCI_IRQS; i++) { - irq_desc[i + IRQ_PCI_INTAD_BASE].handler = &tsi108_pci_irq; + irq_desc[i + IRQ_PCI_INTAD_BASE].chip = &tsi108_pci_irq; irq_desc[i + IRQ_PCI_INTAD_BASE].status |= IRQ_LEVEL; } init_pci_source(); } -int tsi108_irq_cascade(struct pt_regs *regs, void *unused) +void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs) { - return get_pci_source(); + unsigned int cascade_irq = get_pci_source(); + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq, regs); + desc->chip->eoi(irq); } |