diff options
Diffstat (limited to 'arch/powerpc')
429 files changed, 20348 insertions, 7940 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 5b8d8382b762..4e40c122bf26 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -49,6 +49,19 @@ config IRQ_PER_CPU bool default y +config STACKTRACE_SUPPORT + bool + default y + +config TRACE_IRQFLAGS_SUPPORT + bool + depends on PPC64 + default y + +config LOCKDEP_SUPPORT + bool + default y + config RWSEM_GENERIC_SPINLOCK bool @@ -81,6 +94,11 @@ config GENERIC_FIND_NEXT_BIT bool default y +config GENERIC_GPIO + bool + help + Generic GPIO API support + config ARCH_NO_VIRT_TO_BUS def_bool PPC64 @@ -90,6 +108,8 @@ config PPC select HAVE_IDE select HAVE_OPROFILE select HAVE_KPROBES + select HAVE_KRETPROBES + select HAVE_LMB config EARLY_PRINTK bool @@ -209,15 +229,6 @@ source kernel/Kconfig.hz source kernel/Kconfig.preempt source "fs/Kconfig.binfmt" -# We optimistically allocate largepages from the VM, so make the limit -# large enough (16MB). This badly named config option is actually -# max order + 1 -config FORCE_MAX_ZONEORDER - int - depends on PPC64 - default "9" if PPC_64K_PAGES - default "13" - config HUGETLB_PAGE_SIZE_VARIABLE bool depends on HUGETLB_PAGE @@ -306,6 +317,16 @@ config CRASH_DUMP Don't change this unless you know what you are doing. +config PHYP_DUMP + bool "Hypervisor-assisted dump (EXPERIMENTAL)" + depends on PPC_PSERIES && EXPERIMENTAL + help + Hypervisor-assisted dump is meant to be a kdump replacement + offering robustness and speed not possible without system + hypervisor assistence. + + If unsure, say "N" + config PPCBUG_NVRAM bool "Enable reading PPCBUG NVRAM during boot" if PPLUS || LOPEC default y if PPC_PREP @@ -380,6 +401,26 @@ config PPC_64K_PAGES while on hardware with such support, it will be used to map normal application pages. +config FORCE_MAX_ZONEORDER + int "Maximum zone order" + default "9" if PPC_64K_PAGES + default "13" if PPC64 && !PPC_64K_PAGES + default "11" + help + The kernel memory allocator divides physically contiguous memory + blocks into "zones", where each zone is a power of two number of + pages. This option selects the largest power of two that the kernel + keeps in the memory allocator. If you need to allocate very large + blocks of physically contiguous memory, then you may need to + increase this value. + + This config option is actually maximum order plus one. For example, + a value of 11 means that the largest free memory block is 2^10 pages. + + The page size is not necessarily 4KB. For example, on 64-bit + systems, 64KB pages can be enabled via CONFIG_PPC_64K_PAGES. Keep + this in mind when choosing a value for this option. + config PPC_SUBPAGE_PROT bool "Support setting protections for 4k subpages" depends on PPC_64K_PAGES @@ -489,6 +530,14 @@ config FSL_PCI bool select PPC_INDIRECT_PCI +config 4xx_SOC + bool + +config FSL_LBC + bool + help + Freescale Localbus support + # Yes MCA RS/6000s exist but Linux-PPC does not currently support any config MCA bool @@ -577,20 +626,6 @@ config ADVANCED_OPTIONS comment "Default settings for advanced configuration options are used" depends on !ADVANCED_OPTIONS -config HIGHMEM_START_BOOL - bool "Set high memory pool address" - depends on ADVANCED_OPTIONS && HIGHMEM - help - This option allows you to set the base address of the kernel virtual - area used to map high memory pages. This can be useful in - optimizing the layout of kernel virtual memory. - - Say N here unless you know what you are doing. - -config HIGHMEM_START - hex "Virtual start address of high memory pool" if HIGHMEM_START_BOOL - default "0xfe000000" - config LOWMEM_SIZE_BOOL bool "Set maximum low memory" depends on ADVANCED_OPTIONS @@ -607,21 +642,76 @@ config LOWMEM_SIZE hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL default "0x30000000" +config RELOCATABLE + bool "Build a relocatable kernel (EXPERIMENTAL)" + depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && FSL_BOOKE + help + This builds a kernel image that is capable of running at the + location the kernel is loaded at (some alignment restrictions may + exist). + + One use is for the kexec on panic case where the recovery kernel + must live at a different physical address than the primary + kernel. + + Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address + it has been loaded at and the compile time physical addresses + CONFIG_PHYSICAL_START is ignored. However CONFIG_PHYSICAL_START + setting can still be useful to bootwrappers that need to know the + load location of the kernel (eg. u-boot/mkimage). + +config PAGE_OFFSET_BOOL + bool "Set custom page offset address" + depends on ADVANCED_OPTIONS + help + This option allows you to set the kernel virtual address at which + the kernel will map low memory. This can be useful in optimizing + the virtual memory layout of the system. + + Say N here unless you know what you are doing. + +config PAGE_OFFSET + hex "Virtual address of memory base" if PAGE_OFFSET_BOOL + default "0xc0000000" + config KERNEL_START_BOOL bool "Set custom kernel base address" depends on ADVANCED_OPTIONS help This option allows you to set the kernel virtual address at which - the kernel will map low memory (the kernel image will be linked at - this address). This can be useful in optimizing the virtual memory - layout of the system. + the kernel will be loaded. Normally this should match PAGE_OFFSET + however there are times (like kdump) that one might not want them + to be the same. Say N here unless you know what you are doing. config KERNEL_START hex "Virtual address of kernel base" if KERNEL_START_BOOL + default PAGE_OFFSET if PAGE_OFFSET_BOOL + default "0xc2000000" if CRASH_DUMP default "0xc0000000" +config PHYSICAL_START_BOOL + bool "Set physical address where the kernel is loaded" + depends on ADVANCED_OPTIONS && FLATMEM && FSL_BOOKE + help + This gives the physical address where the kernel is loaded. + + Say N here unless you know what you are doing. + +config PHYSICAL_START + hex "Physical address where the kernel is loaded" if PHYSICAL_START_BOOL + default "0x02000000" if PPC_STD_MMU && CRASH_DUMP + default "0x00000000" + +config PHYSICAL_ALIGN + hex + default "0x10000000" if FSL_BOOKE + help + This value puts the alignment restrictions on physical address + where kernel is loaded and run from. Kernel is compiled for an + address which meets above alignment restriction. + config TASK_SIZE_BOOL bool "Set custom user task size" depends on ADVANCED_OPTIONS @@ -662,31 +752,23 @@ config CONSISTENT_SIZE hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL default "0x00200000" if NOT_COHERENT_CACHE -config BOOT_LOAD_BOOL - bool "Set the boot link/load address" - depends on ADVANCED_OPTIONS && !PPC_MULTIPLATFORM - help - This option allows you to set the initial load address of the zImage - or zImage.initrd file. This can be useful if you are on a board - which has a small amount of memory. - - Say N here unless you know what you are doing. - -config BOOT_LOAD - hex "Link/load address for booting" if BOOT_LOAD_BOOL - default "0x00400000" if 40x || 8xx || 8260 - default "0x01000000" if 44x - default "0x00800000" - config PIN_TLB bool "Pinned Kernel TLBs (860 ONLY)" depends on ADVANCED_OPTIONS && 8xx endmenu if PPC64 +config PAGE_OFFSET + hex + default "0xc000000000000000" config KERNEL_START hex + default "0xc000000002000000" if CRASH_DUMP default "0xc000000000000000" +config PHYSICAL_START + hex + default "0x02000000" if CRASH_DUMP + default "0x00000000" endif source "net/Kconfig" @@ -721,3 +803,4 @@ config PPC_CLOCK config PPC_LIB_RHEAP bool +source "arch/powerpc/kvm/Kconfig" diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index db7cc34c24d4..807a2dce6263 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -151,6 +151,9 @@ config BOOTX_TEXT config PPC_EARLY_DEBUG bool "Early debugging (dangerous)" + # PPC_EARLY_DEBUG on 440 leaves AS=1 mappings above the TLB high water + # mark, which doesn't work with current 440 KVM. + depends on !KVM help Say Y to enable some early debugging facilities that may be available for your processor/board combination. Those facilities are hacks @@ -269,7 +272,7 @@ config PPC_EARLY_DEBUG_CPM_ADDR hex "CPM UART early debug transmit descriptor address" depends on PPC_EARLY_DEBUG_CPM default "0xfa202008" if PPC_EP88XC - default "0xf0000008" if CPM2 + default "0xf0001ff8" if CPM2 default "0xff002008" if CPM1 help This specifies the address of the transmit descriptor diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 1c6ce3536e4c..9dcdc036cdf7 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -71,13 +71,11 @@ endif LDFLAGS_vmlinux := -Bstatic -CPPFLAGS-$(CONFIG_PPC32) := -Iarch/$(ARCH) -AFLAGS-$(CONFIG_PPC32) := -Iarch/$(ARCH) CFLAGS-$(CONFIG_PPC64) := -mminimal-toc -mtraceback=none -mcall-aixdesc -CFLAGS-$(CONFIG_PPC32) := -Iarch/$(ARCH) -ffixed-r2 -mmultiple -KBUILD_CPPFLAGS += $(CPPFLAGS-y) -KBUILD_AFLAGS += $(AFLAGS-y) -KBUILD_CFLAGS += -msoft-float -pipe $(CFLAGS-y) +CFLAGS-$(CONFIG_PPC32) := -ffixed-r2 -mmultiple +KBUILD_CPPFLAGS += -Iarch/$(ARCH) +KBUILD_AFLAGS += -Iarch/$(ARCH) +KBUILD_CFLAGS += -msoft-float -pipe -Iarch/$(ARCH) $(CFLAGS-y) CPP = $(CC) -E $(KBUILD_CFLAGS) CHECKFLAGS += -m$(CONFIG_WORD_SIZE) -D__powerpc__ -D__powerpc$(CONFIG_WORD_SIZE)__ @@ -147,6 +145,7 @@ core-y += arch/powerpc/kernel/ \ arch/powerpc/platforms/ core-$(CONFIG_MATH_EMULATION) += arch/powerpc/math-emu/ core-$(CONFIG_XMON) += arch/powerpc/xmon/ +core-$(CONFIG_KVM) += arch/powerpc/kvm/ drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/ @@ -155,7 +154,7 @@ all: zImage CPPFLAGS_vmlinux.lds := -Upowerpc -BOOT_TARGETS = zImage zImage.initrd uImage treeImage.% cuImage.% +BOOT_TARGETS = zImage zImage.initrd uImage zImage% dtbImage% treeImage.% cuImage.% PHONY += $(BOOT_TARGETS) @@ -164,7 +163,7 @@ boot := arch/$(ARCH)/boot $(BOOT_TARGETS): vmlinux $(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@) -bootwrapper_install: +bootwrapper_install %.dtb: $(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@) define archhelp diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore index 5ef2bdf8d189..2347294ff35b 100644 --- a/arch/powerpc/boot/.gitignore +++ b/arch/powerpc/boot/.gitignore @@ -27,6 +27,7 @@ zImage.chrp zImage.coff zImage.coff.lds zImage.ep* +zImage.iseries zImage.*lds zImage.miboot zImage.pmac diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index e3993a607584..7822d25c9d31 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -40,6 +40,7 @@ $(obj)/ebony.o: BOOTCFLAGS += -mcpu=405 $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405 $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405 $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405 +$(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405 zlib := inffast.c inflate.c inftrees.c @@ -64,7 +65,8 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \ fixed-head.S ep88xc.c ep405.c \ cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \ - cuboot-warp.c cuboot-85xx-cpm2.c + cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \ + virtex405-head.S src-boot := $(src-wlib) $(src-plat) empty.c src-boot := $(addprefix $(obj)/, $(src-boot)) @@ -186,13 +188,13 @@ quiet_cmd_wrap = WRAP $@ image-$(CONFIG_PPC_PSERIES) += zImage.pseries image-$(CONFIG_PPC_MAPLE) += zImage.pseries image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries -image-$(CONFIG_PPC_PS3) += zImage-dtb.ps3 +image-$(CONFIG_PPC_PS3) += dtbImage.ps3 image-$(CONFIG_PPC_CELLEB) += zImage.pseries image-$(CONFIG_PPC_CHRP) += zImage.chrp image-$(CONFIG_PPC_EFIKA) += zImage.chrp image-$(CONFIG_PPC_PMAC) += zImage.pmac image-$(CONFIG_PPC_HOLLY) += zImage.holly -image-$(CONFIG_PPC_PRPMC2800) += zImage.prpmc2800 +image-$(CONFIG_PPC_PRPMC2800) += dtbImage.prpmc2800 image-$(CONFIG_PPC_ISERIES) += zImage.iseries image-$(CONFIG_DEFAULT_UIMAGE) += uImage @@ -205,7 +207,7 @@ image-$(CONFIG_DEFAULT_UIMAGE) += uImage # # Board ports in arch/powerpc/platform/40x/Kconfig -image-$(CONFIG_EP405) += zImage-dtb.ep405 +image-$(CONFIG_EP405) += dtbImage.ep405 image-$(CONFIG_WALNUT) += treeImage.walnut # Board ports in arch/powerpc/platform/44x/Kconfig @@ -216,13 +218,14 @@ image-$(CONFIG_RAINIER) += cuImage.rainier image-$(CONFIG_TAISHAN) += cuImage.taishan image-$(CONFIG_KATMAI) += cuImage.katmai image-$(CONFIG_WARP) += cuImage.warp +image-$(CONFIG_YOSEMITE) += cuImage.yosemite # Board ports in arch/powerpc/platform/8xx/Kconfig image-$(CONFIG_PPC_MPC86XADS) += cuImage.mpc866ads image-$(CONFIG_PPC_MPC885ADS) += cuImage.mpc885ads -image-$(CONFIG_PPC_EP88XC) += zImage-dtb.ep88xc +image-$(CONFIG_PPC_EP88XC) += dtbImage.ep88xc image-$(CONFIG_PPC_ADDER875) += cuImage.adder875-uboot \ - zImage-dtb.adder875-redboot + dtbImage.adder875-redboot # Board ports in arch/powerpc/platform/52xx/Kconfig image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200 cuImage.lite5200b @@ -230,7 +233,7 @@ image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200 cuImage.lite5200b # Board ports in arch/powerpc/platform/82xx/Kconfig image-$(CONFIG_MPC8272_ADS) += cuImage.mpc8272ads image-$(CONFIG_PQ2FADS) += cuImage.pq2fads -image-$(CONFIG_EP8248E) += zImage-dtb.ep8248e +image-$(CONFIG_EP8248E) += dtbImage.ep8248e # Board ports in arch/powerpc/platform/83xx/Kconfig image-$(CONFIG_MPC832x_MDS) += cuImage.mpc832x_mds @@ -253,8 +256,9 @@ image-$(CONFIG_TQM8540) += cuImage.tqm8540 image-$(CONFIG_TQM8541) += cuImage.tqm8541 image-$(CONFIG_TQM8555) += cuImage.tqm8555 image-$(CONFIG_TQM8560) += cuImage.tqm8560 -image-$(CONFIG_SBC8548) += cuImage.tqm8548 -image-$(CONFIG_SBC8560) += cuImage.tqm8560 +image-$(CONFIG_SBC8548) += cuImage.sbc8548 +image-$(CONFIG_SBC8560) += cuImage.sbc8560 +image-$(CONFIG_KSI8560) += cuImage.ksi8560 # Board ports in arch/powerpc/platform/embedded6xx/Kconfig image-$(CONFIG_STORCENTER) += cuImage.storcenter @@ -268,7 +272,8 @@ endif initrd- := $(patsubst zImage%, zImage.initrd%, $(image-n) $(image-)) initrd-y := $(patsubst zImage%, zImage.initrd%, \ - $(patsubst treeImage%, treeImage.initrd%, $(image-y))) + $(patsubst dtbImage%, dtbImage.initrd%, \ + $(patsubst treeImage%, treeImage.initrd%, $(image-y)))) initrd-y := $(filter-out $(image-y), $(initrd-y)) targets += $(image-y) $(initrd-y) @@ -283,11 +288,12 @@ $(obj)/zImage.initrd.%: vmlinux $(wrapperbits) $(obj)/zImage.%: vmlinux $(wrapperbits) $(call if_changed,wrap,$*) -$(obj)/zImage-dtb.initrd.%: vmlinux $(wrapperbits) $(dtstree)/%.dts - $(call if_changed,wrap,$*,$(dtstree)/$*.dts,,$(obj)/ramdisk.image.gz) +# dtbImage% - a dtbImage is a zImage with an embedded device tree blob +$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/%.dtb + $(call if_changed,wrap,$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz) -$(obj)/zImage-dtb.%: vmlinux $(wrapperbits) $(dtstree)/%.dts - $(call if_changed,wrap,$*,$(dtstree)/$*.dts) +$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/%.dtb + $(call if_changed,wrap,$*,,$(obj)/$*.dtb) # This cannot be in the root of $(src) as the zImage rule always adds a $(obj) # prefix @@ -300,14 +306,24 @@ $(obj)/zImage.iseries: vmlinux $(obj)/uImage: vmlinux $(wrapperbits) $(call if_changed,wrap,uboot) -$(obj)/cuImage.%: vmlinux $(dtstree)/%.dts $(wrapperbits) - $(call if_changed,wrap,cuboot-$*,$(dtstree)/$*.dts) +$(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) + $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb) -$(obj)/treeImage.initrd.%: vmlinux $(dtstree)/%.dts $(wrapperbits) - $(call if_changed,wrap,treeboot-$*,$(dtstree)/$*.dts,,$(obj)/ramdisk.image.gz) +$(obj)/simpleImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) + $(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz) -$(obj)/treeImage.%: vmlinux $(dtstree)/%.dts $(wrapperbits) - $(call if_changed,wrap,treeboot-$*,$(dtstree)/$*.dts) +$(obj)/simpleImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) + $(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb) + +$(obj)/treeImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) + $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz) + +$(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) + $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb) + +# Rule to build device tree blobs +$(obj)/%.dtb: $(dtstree)/%.dts $(obj)/dtc + $(obj)/dtc -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts # If there isn't a platform selected then just strip the vmlinux. ifeq (,$(image-y)) @@ -324,7 +340,7 @@ install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y)) # anything not in $(targets) clean-files += $(image-) $(initrd-) zImage zImage.initrd cuImage.* treeImage.* \ - otheros.bld + otheros.bld *.dtb # clean up files cached by wrapper clean-kernel := vmlinux.strip vmlinux.bin diff --git a/arch/powerpc/boot/bamboo.c b/arch/powerpc/boot/bamboo.c index 54b33f1500e2..b82cacbc60db 100644 --- a/arch/powerpc/boot/bamboo.c +++ b/arch/powerpc/boot/bamboo.c @@ -33,7 +33,8 @@ static void bamboo_fixups(void) ibm440ep_fixup_clocks(sysclk, 11059200, 25000000); ibm4xx_sdram_fixup_memsize(); ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00); - dt_fixup_mac_addresses(bamboo_mac0, bamboo_mac1); + dt_fixup_mac_address_by_alias("ethernet0", bamboo_mac0); + dt_fixup_mac_address_by_alias("ethernet1", bamboo_mac1); } void bamboo_init(void *mac0, void *mac1) diff --git a/arch/powerpc/boot/cpm-serial.c b/arch/powerpc/boot/cpm-serial.c index 28296facb2ae..19dc15abe43d 100644 --- a/arch/powerpc/boot/cpm-serial.c +++ b/arch/powerpc/boot/cpm-serial.c @@ -11,6 +11,7 @@ #include "types.h" #include "io.h" #include "ops.h" +#include "page.h" struct cpm_scc { u32 gsmrl; @@ -42,6 +43,22 @@ struct cpm_param { u16 tbase; u8 rfcr; u8 tfcr; + u16 mrblr; + u32 rstate; + u8 res1[4]; + u16 rbptr; + u8 res2[6]; + u32 tstate; + u8 res3[4]; + u16 tbptr; + u8 res4[6]; + u16 maxidl; + u16 idlc; + u16 brkln; + u16 brkec; + u16 brkcr; + u16 rmask; + u8 res5[4]; }; struct cpm_bd { @@ -54,10 +71,10 @@ static void *cpcr; static struct cpm_param *param; static struct cpm_smc *smc; static struct cpm_scc *scc; -struct cpm_bd *tbdf, *rbdf; +static struct cpm_bd *tbdf, *rbdf; static u32 cpm_cmd; -static u8 *muram_start; -static u32 muram_offset; +static void *cbd_addr; +static u32 cbd_offset; static void (*do_cmd)(int op); static void (*enable_port)(void); @@ -119,20 +136,25 @@ static int cpm_serial_open(void) out_8(¶m->rfcr, 0x10); out_8(¶m->tfcr, 0x10); - - rbdf = (struct cpm_bd *)muram_start; - rbdf->addr = (u8 *)(rbdf + 2); + out_be16(¶m->mrblr, 1); + out_be16(¶m->maxidl, 0); + out_be16(¶m->brkec, 0); + out_be16(¶m->brkln, 0); + out_be16(¶m->brkcr, 0); + + rbdf = cbd_addr; + rbdf->addr = (u8 *)rbdf - 1; rbdf->sc = 0xa000; rbdf->len = 1; tbdf = rbdf + 1; - tbdf->addr = (u8 *)(rbdf + 2) + 1; + tbdf->addr = (u8 *)rbdf - 2; tbdf->sc = 0x2000; tbdf->len = 1; sync(); - out_be16(¶m->rbase, muram_offset); - out_be16(¶m->tbase, muram_offset + sizeof(struct cpm_bd)); + out_be16(¶m->rbase, cbd_offset); + out_be16(¶m->tbase, cbd_offset + sizeof(struct cpm_bd)); do_cmd(CPM_CMD_INIT_RX_TX); @@ -175,10 +197,12 @@ static unsigned char cpm_serial_getc(void) int cpm_console_init(void *devp, struct serial_console_data *scdp) { - void *reg_virt[2]; - int is_smc = 0, is_cpm2 = 0, n; - unsigned long reg_phys; + void *vreg[2]; + u32 reg[2]; + int is_smc = 0, is_cpm2 = 0; void *parent, *muram; + void *muram_addr; + unsigned long muram_offset, muram_size; if (dt_is_compatible(devp, "fsl,cpm1-smc-uart")) { is_smc = 1; @@ -202,63 +226,64 @@ int cpm_console_init(void *devp, struct serial_console_data *scdp) else do_cmd = cpm1_cmd; - n = getprop(devp, "fsl,cpm-command", &cpm_cmd, 4); - if (n < 4) + if (getprop(devp, "fsl,cpm-command", &cpm_cmd, 4) < 4) return -1; - n = getprop(devp, "virtual-reg", reg_virt, sizeof(reg_virt)); - if (n < (int)sizeof(reg_virt)) { - for (n = 0; n < 2; n++) { - if (!dt_xlate_reg(devp, n, ®_phys, NULL)) - return -1; - - reg_virt[n] = (void *)reg_phys; - } - } + if (dt_get_virtual_reg(devp, vreg, 2) < 2) + return -1; if (is_smc) - smc = reg_virt[0]; + smc = vreg[0]; else - scc = reg_virt[0]; + scc = vreg[0]; - param = reg_virt[1]; + param = vreg[1]; parent = get_parent(devp); if (!parent) return -1; - n = getprop(parent, "virtual-reg", reg_virt, sizeof(reg_virt)); - if (n < (int)sizeof(reg_virt)) { - if (!dt_xlate_reg(parent, 0, ®_phys, NULL)) - return -1; - - reg_virt[0] = (void *)reg_phys; - } - - cpcr = reg_virt[0]; + if (dt_get_virtual_reg(parent, &cpcr, 1) < 1) + return -1; muram = finddevice("/soc/cpm/muram/data"); if (!muram) return -1; /* For bootwrapper-compatible device trees, we assume that the first - * entry has at least 18 bytes, and that #address-cells/#data-cells + * entry has at least 128 bytes, and that #address-cells/#data-cells * is one for both parent and child. */ - n = getprop(muram, "virtual-reg", reg_virt, sizeof(reg_virt)); - if (n < (int)sizeof(reg_virt)) { - if (!dt_xlate_reg(muram, 0, ®_phys, NULL)) - return -1; + if (dt_get_virtual_reg(muram, &muram_addr, 1) < 1) + return -1; - reg_virt[0] = (void *)reg_phys; - } + if (getprop(muram, "reg", reg, 8) < 8) + return -1; - muram_start = reg_virt[0]; + muram_offset = reg[0]; + muram_size = reg[1]; - n = getprop(muram, "reg", &muram_offset, 4); - if (n < 4) - return -1; + /* Store the buffer descriptors at the end of the first muram chunk. + * For SMC ports on CPM2-based platforms, relocate the parameter RAM + * just before the buffer descriptors. + */ + + cbd_offset = muram_offset + muram_size - 2 * sizeof(struct cpm_bd); + + if (is_cpm2 && is_smc) { + u16 *smc_base = (u16 *)param; + u16 pram_offset; + + pram_offset = cbd_offset - 64; + pram_offset = _ALIGN_DOWN(pram_offset, 64); + + disable_port(); + out_be16(smc_base, pram_offset); + param = muram_addr - muram_offset + pram_offset; + } + + cbd_addr = muram_addr - muram_offset + cbd_offset; scdp->open = cpm_serial_open; scdp->putc = cpm_serial_putc; diff --git a/arch/powerpc/boot/cuboot-bamboo.c b/arch/powerpc/boot/cuboot-bamboo.c index 900c7ff2b7e9..b5c30f766c40 100644 --- a/arch/powerpc/boot/cuboot-bamboo.c +++ b/arch/powerpc/boot/cuboot-bamboo.c @@ -17,6 +17,7 @@ #include "44x.h" #include "cuboot.h" +#define TARGET_4xx #define TARGET_44x #include "ppcboot.h" diff --git a/arch/powerpc/boot/cuboot-ebony.c b/arch/powerpc/boot/cuboot-ebony.c index c5f37ce172ea..56564ba37f62 100644 --- a/arch/powerpc/boot/cuboot-ebony.c +++ b/arch/powerpc/boot/cuboot-ebony.c @@ -17,6 +17,7 @@ #include "44x.h" #include "cuboot.h" +#define TARGET_4xx #define TARGET_44x #include "ppcboot.h" diff --git a/arch/powerpc/boot/cuboot-katmai.c b/arch/powerpc/boot/cuboot-katmai.c index c021167f9381..5434d70b5660 100644 --- a/arch/powerpc/boot/cuboot-katmai.c +++ b/arch/powerpc/boot/cuboot-katmai.c @@ -22,6 +22,7 @@ #include "44x.h" #include "cuboot.h" +#define TARGET_4xx #define TARGET_44x #include "ppcboot.h" diff --git a/arch/powerpc/boot/cuboot-pq2.c b/arch/powerpc/boot/cuboot-pq2.c index f56ac6cae9f3..9c7d13428293 100644 --- a/arch/powerpc/boot/cuboot-pq2.c +++ b/arch/powerpc/boot/cuboot-pq2.c @@ -128,7 +128,7 @@ static void fixup_pci(void) u8 *soc_regs; int i, len; void *node, *parent_node; - u32 naddr, nsize, mem_log2; + u32 naddr, nsize, mem_pow2, mem_mask; node = finddevice("/pci"); if (!node || !dt_is_compatible(node, "fsl,pq2-pci")) @@ -141,7 +141,7 @@ static void fixup_pci(void) soc_regs = (u8 *)fsl_get_immr(); if (!soc_regs) - goto err; + goto unhandled; dt_get_reg_format(node, &naddr, &nsize); if (naddr != 3 || nsize != 2) @@ -153,7 +153,7 @@ static void fixup_pci(void) dt_get_reg_format(parent_node, &naddr, &nsize); if (naddr != 1 || nsize != 1) - goto err; + goto unhandled; len = getprop(node, "ranges", pci_ranges_buf, sizeof(pci_ranges_buf)); @@ -170,14 +170,20 @@ static void fixup_pci(void) } if (!mem || !mmio || !io) - goto err; + goto unhandled; + if (mem->size[1] != mmio->size[1]) + goto unhandled; + if (mem->size[1] & (mem->size[1] - 1)) + goto unhandled; + if (io->size[1] & (io->size[1] - 1)) + goto unhandled; if (mem->phys_addr + mem->size[1] == mmio->phys_addr) mem_base = mem; else if (mmio->phys_addr + mmio->size[1] == mem->phys_addr) mem_base = mmio; else - goto err; + goto unhandled; out_be32(&pci_regs[1][0], mem_base->phys_addr | 1); out_be32(&pci_regs[2][0], ~(mem->size[1] + mmio->size[1] - 1)); @@ -201,8 +207,9 @@ static void fixup_pci(void) out_le32(&pci_regs[0][58], 0); out_le32(&pci_regs[0][60], 0); - mem_log2 = 1 << (__ilog2_u32(bd.bi_memsize - 1) + 1); - out_le32(&pci_regs[0][62], 0xa0000000 | ~((1 << (mem_log2 - 12)) - 1)); + mem_pow2 = 1 << (__ilog2_u32(bd.bi_memsize - 1) + 1); + mem_mask = ~(mem_pow2 - 1) >> 12; + out_le32(&pci_regs[0][62], 0xa0000000 | mem_mask); /* If PCI is disabled, drive RST high to enable. */ if (!(in_le32(&pci_regs[0][32]) & 1)) { @@ -228,7 +235,11 @@ static void fixup_pci(void) return; err: - printf("Bad PCI node\r\n"); + printf("Bad PCI node -- using existing firmware setup.\r\n"); + return; + +unhandled: + printf("Unsupported PCI node -- using existing firmware setup.\r\n"); } static void pq2_platform_fixups(void) diff --git a/arch/powerpc/boot/cuboot-rainier.c b/arch/powerpc/boot/cuboot-rainier.c index cf452b66dce8..0a3fddee54df 100644 --- a/arch/powerpc/boot/cuboot-rainier.c +++ b/arch/powerpc/boot/cuboot-rainier.c @@ -42,7 +42,8 @@ static void rainier_fixups(void) ibm440ep_fixup_clocks(sysclk, 11059200, 50000000); ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); ibm4xx_denali_fixup_memsize(); - dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr); + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); + dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); } void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, diff --git a/arch/powerpc/boot/cuboot-sequoia.c b/arch/powerpc/boot/cuboot-sequoia.c index f555575a44de..caf8f2e842ea 100644 --- a/arch/powerpc/boot/cuboot-sequoia.c +++ b/arch/powerpc/boot/cuboot-sequoia.c @@ -42,7 +42,8 @@ static void sequoia_fixups(void) ibm440ep_fixup_clocks(sysclk, 11059200, 50000000); ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); ibm4xx_denali_fixup_memsize(); - dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr); + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); + dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); } void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, diff --git a/arch/powerpc/boot/cuboot-taishan.c b/arch/powerpc/boot/cuboot-taishan.c index f66455a45ab1..9bc906a754dd 100644 --- a/arch/powerpc/boot/cuboot-taishan.c +++ b/arch/powerpc/boot/cuboot-taishan.c @@ -21,7 +21,9 @@ #include "dcr.h" #include "4xx.h" +#define TARGET_4xx #define TARGET_44x +#define TARGET_440GX #include "ppcboot.h" static bd_t bd; @@ -38,7 +40,8 @@ static void taishan_fixups(void) ibm4xx_sdram_fixup_memsize(); - dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr); + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); + dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); } diff --git a/arch/powerpc/boot/cuboot-warp.c b/arch/powerpc/boot/cuboot-warp.c index bdedebe1bc14..eb108a877492 100644 --- a/arch/powerpc/boot/cuboot-warp.c +++ b/arch/powerpc/boot/cuboot-warp.c @@ -11,6 +11,7 @@ #include "4xx.h" #include "cuboot.h" +#define TARGET_4xx #define TARGET_44x #include "ppcboot.h" @@ -23,7 +24,7 @@ static void warp_fixups(void) ibm440ep_fixup_clocks(sysclk, 11059200, 50000000); ibm4xx_sdram_fixup_memsize(); ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); - dt_fixup_mac_addresses(&bd.bi_enetaddr); + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); } diff --git a/arch/powerpc/boot/cuboot-yosemite.c b/arch/powerpc/boot/cuboot-yosemite.c new file mode 100644 index 000000000000..cc6e338c5d0d --- /dev/null +++ b/arch/powerpc/boot/cuboot-yosemite.c @@ -0,0 +1,44 @@ +/* + * Old U-boot compatibility for Yosemite + * + * Author: Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * Copyright 2008 IBM Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "stdio.h" +#include "4xx.h" +#include "44x.h" +#include "cuboot.h" + +#define TARGET_4xx +#define TARGET_44x +#include "ppcboot.h" + +static bd_t bd; + +static void yosemite_fixups(void) +{ + unsigned long sysclk = 66666666; + + ibm440ep_fixup_clocks(sysclk, 11059200, 50000000); + ibm4xx_sdram_fixup_memsize(); + ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00); + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); + dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + platform_ops.fixups = yosemite_fixups; + platform_ops.exit = ibm44x_dbcr_reset; + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/devtree.c b/arch/powerpc/boot/devtree.c index 60f561e307a9..5d12336dc360 100644 --- a/arch/powerpc/boot/devtree.c +++ b/arch/powerpc/boot/devtree.c @@ -350,3 +350,23 @@ int dt_is_compatible(void *node, const char *compat) return 0; } + +int dt_get_virtual_reg(void *node, void **addr, int nres) +{ + unsigned long xaddr; + int n; + + n = getprop(node, "virtual-reg", addr, nres * 4); + if (n > 0) + return n / 4; + + for (n = 0; n < nres; n++) { + if (!dt_xlate_reg(node, n, &xaddr, NULL)) + break; + + addr[n] = (void *)xaddr; + } + + return n; +} + diff --git a/arch/powerpc/boot/dts/bamboo.dts b/arch/powerpc/boot/dts/bamboo.dts index 7dc37c9a7446..ba2521bdaab1 100644 --- a/arch/powerpc/boot/dts/bamboo.dts +++ b/arch/powerpc/boot/dts/bamboo.dts @@ -204,7 +204,6 @@ }; EMAC0: ethernet@ef600e00 { - linux,network-index = <0>; device_type = "network"; compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; interrupt-parent = <&UIC1>; @@ -225,7 +224,6 @@ }; EMAC1: ethernet@ef600f00 { - linux,network-index = <1>; device_type = "network"; compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; interrupt-parent = <&UIC1>; diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts new file mode 100644 index 000000000000..39634124929b --- /dev/null +++ b/arch/powerpc/boot/dts/canyonlands.dts @@ -0,0 +1,439 @@ +/* + * Device Tree Source for AMCC Canyonlands (460EX) + * + * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,canyonlands"; + compatible = "amcc,canyonlands"; + dcr-parent = <&/cpus/cpu@0>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,460EX"; + reg = <0>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <20>; + d-cache-line-size = <20>; + i-cache-size = <8000>; + d-cache-size = <8000>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-460ex","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-460ex","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0d0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1e 4 1f 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-460ex","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0e0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <a 4 b 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic-460ex","ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0f0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <10 4 11 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-460ex"; + dcr-reg = <00e 002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-460ex"; + dcr-reg = <00c 002>; + }; + + plb { + compatible = "ibm,plb-460ex", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: sdram { + compatible = "ibm,sdram-460ex", "ibm,sdram-405gp"; + dcr-reg = <010 2>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-460ex", "ibm,mcmal2"; + dcr-reg = <180 62>; + num-tx-chans = <2>; + num-rx-chans = <10>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-parent = <&UIC2>; + interrupts = < /*TXEOB*/ 6 4 + /*RXEOB*/ 7 4 + /*SERR*/ 3 4 + /*TXDE*/ 4 4 + /*RXDE*/ 5 4>; + }; + + POB0: opb { + compatible = "ibm,opb-460ex", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <b0000000 4 b0000000 50000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-460ex", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + interrupts = <6 4>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl512n", "cfi-flash"; + bank-width = <2>; + reg = <0 000000 4000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0 1e0000>; + }; + partition@1e0000 { + label = "dtb"; + reg = <1e0000 20000>; + }; + partition@200000 { + label = "ramdisk"; + reg = <200000 1400000>; + }; + partition@1600000 { + label = "jffs2"; + reg = <1600000 400000>; + }; + partition@1a00000 { + label = "user"; + reg = <1a00000 2560000>; + }; + partition@3f60000 { + label = "env"; + reg = <3f60000 40000>; + }; + partition@3fa0000 { + label = "u-boot"; + reg = <3fa0000 60000>; + }; + }; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600300 8>; + virtual-reg = <ef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <1 4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600400 8>; + virtual-reg = <ef600400>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + UART2: serial@ef600500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600500 8>; + virtual-reg = <ef600500>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <1d 4>; + }; + + UART3: serial@ef600600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600600 8>; + virtual-reg = <ef600600>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <1e 4>; + }; + + IIC0: i2c@ef600700 { + compatible = "ibm,iic-460ex", "ibm,iic"; + reg = <ef600700 14>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + + IIC1: i2c@ef600800 { + compatible = "ibm,iic-460ex", "ibm,iic"; + reg = <ef600800 14>; + interrupt-parent = <&UIC0>; + interrupts = <3 4>; + }; + + ZMII0: emac-zmii@ef600d00 { + compatible = "ibm,zmii-460ex", "ibm,zmii"; + reg = <ef600d00 c>; + }; + + RGMII0: emac-rgmii@ef601500 { + compatible = "ibm,rgmii-460ex", "ibm,rgmii"; + reg = <ef601500 8>; + has-mdio; + }; + + TAH0: emac-tah@ef601350 { + compatible = "ibm,tah-460ex", "ibm,tah"; + reg = <ef601350 30>; + }; + + TAH1: emac-tah@ef601450 { + compatible = "ibm,tah-460ex", "ibm,tah"; + reg = <ef601450 30>; + }; + + EMAC0: ethernet@ef600e00 { + device_type = "network"; + compatible = "ibm,emac-460ex", "ibm,emac4"; + interrupt-parent = <&EMAC0>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC2 10 4 + /*Wake*/ 1 &UIC2 14 4>; + reg = <ef600e00 70>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <2328>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + tah-device = <&TAH0>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@ef600f00 { + device_type = "network"; + compatible = "ibm,emac-460ex", "ibm,emac4"; + interrupt-parent = <&EMAC1>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC2 11 4 + /*Wake*/ 1 &UIC2 15 4>; + reg = <ef600f00 70>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <8>; + cell-index = <1>; + max-frame-size = <2328>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + tah-device = <&TAH1>; + tah-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + }; + + PCIX0: pci@c0ec00000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pcix-460ex", "ibm,plb-pcix"; + primary; + large-inbound-windows; + enable-msi-hole; + reg = <c 0ec00000 8 /* Config space access */ + 0 0 0 /* no IACK cycles */ + c 0ed00000 4 /* Special cycles */ + c 0ec80000 100 /* Internal registers */ + c 0ec80100 fc>; /* Internal messaging registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 0000000d 80000000 0 80000000 + 01000000 0 00000000 0000000c 08000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* This drives busses 0 to 0x3f */ + bus-range = <0 3f>; + + /* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */ + interrupt-map-mask = <0000 0 0 0>; + interrupt-map = < 0000 0 0 0 &UIC1 0 8 >; + }; + + PCIE0: pciex@d00000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; + primary; + port = <0>; /* port number */ + reg = <d 00000000 20000000 /* Config space access */ + c 08010000 00001000>; /* Registers */ + dcr-reg = <100 020>; + sdr-base = <300>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 0000000e 00000000 0 80000000 + 01000000 0 00000000 0000000f 80000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* This drives busses 40 to 0x7f */ + bus-range = <40 7f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0000 0 0 7>; + interrupt-map = < + 0000 0 0 1 &UIC3 c 4 /* swizzled int A */ + 0000 0 0 2 &UIC3 d 4 /* swizzled int B */ + 0000 0 0 3 &UIC3 e 4 /* swizzled int C */ + 0000 0 0 4 &UIC3 f 4 /* swizzled int D */>; + }; + + PCIE1: pciex@d20000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; + primary; + port = <1>; /* port number */ + reg = <d 20000000 20000000 /* Config space access */ + c 08011000 00001000>; /* Registers */ + dcr-reg = <120 020>; + sdr-base = <340>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 0000000e 80000000 0 80000000 + 01000000 0 00000000 0000000f 80010000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* This drives busses 80 to 0xbf */ + bus-range = <80 bf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0000 0 0 7>; + interrupt-map = < + 0000 0 0 1 &UIC3 10 4 /* swizzled int A */ + 0000 0 0 2 &UIC3 11 4 /* swizzled int B */ + 0000 0 0 3 &UIC3 12 4 /* swizzled int C */ + 0000 0 0 4 &UIC3 13 4 /* swizzled int D */>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts index 30737eafe68e..c6ca6319e4f7 100644 --- a/arch/powerpc/boot/dts/cm5200.dts +++ b/arch/powerpc/boot/dts/cm5200.dts @@ -212,13 +212,30 @@ ethernet@3000 { device_type = "network"; compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; - reg = <3000 800>; + reg = <3000 400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <3000 400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + interrupt-parent = <&mpc5200_pic>; + + phy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; }; i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <3d40 40>; interrupts = <2 10 0>; @@ -231,4 +248,22 @@ reg = <8000 4000>; }; }; + + lpb { + model = "fsl,lpb"; + compatible = "fsl,lpb"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 fc000000 2000000>; + + // 16-bit flash device at LocalPlus Bus CS0 + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 2000000>; + bank-width = <2>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; + }; }; diff --git a/arch/powerpc/boot/dts/ebony.dts b/arch/powerpc/boot/dts/ebony.dts index 0b000cb7ed8b..5079dc890e0e 100644 --- a/arch/powerpc/boot/dts/ebony.dts +++ b/arch/powerpc/boot/dts/ebony.dts @@ -241,7 +241,6 @@ }; EMAC0: ethernet@40000800 { - linux,network-index = <0>; device_type = "network"; compatible = "ibm,emac-440gp", "ibm,emac"; interrupt-parent = <&UIC1>; @@ -261,7 +260,6 @@ zmii-channel = <0>; }; EMAC1: ethernet@40000900 { - linux,network-index = <1>; device_type = "network"; compatible = "ibm,emac-440gp", "ibm,emac"; interrupt-parent = <&UIC1>; diff --git a/arch/powerpc/boot/dts/ep8248e.dts b/arch/powerpc/boot/dts/ep8248e.dts index 5d2fb76a72c1..756758fb5b7b 100644 --- a/arch/powerpc/boot/dts/ep8248e.dts +++ b/arch/powerpc/boot/dts/ep8248e.dts @@ -121,8 +121,7 @@ data@0 { compatible = "fsl,cpm-muram-data"; - reg = <0 0x1100 0x1140 - 0xec0 0x9800 0x800>; + reg = <0 0x2000 0x9800 0x800>; }; }; @@ -138,7 +137,7 @@ device_type = "serial"; compatible = "fsl,mpc8248-smc-uart", "fsl,cpm2-smc-uart"; - reg = <0x11a80 0x20 0x1100 0x40>; + reg = <0x11a80 0x20 0x87fc 2>; interrupts = <4 8>; interrupt-parent = <&PIC>; fsl,cpm-brg = <7>; diff --git a/arch/powerpc/boot/dts/ep88xc.dts b/arch/powerpc/boot/dts/ep88xc.dts index 02705f299790..ae57d6240120 100644 --- a/arch/powerpc/boot/dts/ep88xc.dts +++ b/arch/powerpc/boot/dts/ep88xc.dts @@ -2,7 +2,7 @@ * EP88xC Device Tree Source * * Copyright 2006 MontaVista Software, Inc. - * Copyright 2007 Freescale Semiconductor, Inc. + * Copyright 2007,2008 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -10,6 +10,7 @@ * option) any later version. */ +/dts-v1/; / { model = "EP88xC"; @@ -23,44 +24,44 @@ PowerPC,885@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <d#16>; - i-cache-line-size = <d#16>; - d-cache-size = <d#8192>; - i-cache-size = <d#8192>; + reg = <0x0>; + d-cache-line-size = <16>; + i-cache-line-size = <16>; + d-cache-size = <8192>; + i-cache-size = <8192>; timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; - interrupts = <f 2>; // decrementer interrupt + interrupts = <15 2>; // decrementer interrupt interrupt-parent = <&PIC>; }; }; memory { device_type = "memory"; - reg = <0 0>; + reg = <0x0 0x0>; }; localbus@fa200100 { compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus"; #address-cells = <2>; #size-cells = <1>; - reg = <fa200100 40>; + reg = <0xfa200100 0x40>; ranges = < - 0 0 fc000000 04000000 - 3 0 fa000000 01000000 + 0x0 0x0 0xfc000000 0x4000000 + 0x3 0x0 0xfa000000 0x1000000 >; flash@0,2000000 { compatible = "cfi-flash"; - reg = <0 2000000 2000000>; + reg = <0x0 0x2000000 0x2000000>; bank-width = <4>; device-width = <2>; }; board-control@3,400000 { - reg = <3 400000 10>; + reg = <0x3 0x400000 0x10>; compatible = "fsl,ep88xc-bcsr"; }; }; @@ -70,25 +71,25 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0 fa200000 00004000>; + ranges = <0x0 0xfa200000 0x4000>; bus-frequency = <0>; // Temporary -- will go away once kernel uses ranges for get_immrbase(). - reg = <fa200000 4000>; + reg = <0xfa200000 0x4000>; mdio@e00 { compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio"; - reg = <e00 188>; + reg = <0xe00 0x188>; #address-cells = <1>; #size-cells = <0>; PHY0: ethernet-phy@0 { - reg = <0>; + reg = <0x0>; device_type = "ethernet-phy"; }; PHY1: ethernet-phy@1 { - reg = <1>; + reg = <0x1>; device_type = "ethernet-phy"; }; }; @@ -97,7 +98,7 @@ device_type = "network"; compatible = "fsl,mpc885-fec-enet", "fsl,pq1-fec-enet"; - reg = <e00 188>; + reg = <0xe00 0x188>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <3 1>; interrupt-parent = <&PIC>; @@ -109,7 +110,7 @@ device_type = "network"; compatible = "fsl,mpc885-fec-enet", "fsl,pq1-fec-enet"; - reg = <1e00 188>; + reg = <0x1e00 0x188>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <7 1>; interrupt-parent = <&PIC>; @@ -120,7 +121,7 @@ PIC: interrupt-controller@0 { interrupt-controller; #interrupt-cells = <2>; - reg = <0 24>; + reg = <0x0 0x24>; compatible = "fsl,mpc885-pic", "fsl,pq1-pic"; }; @@ -130,29 +131,29 @@ #size-cells = <2>; compatible = "fsl,pq-pcmcia"; device_type = "pcmcia"; - reg = <80 80>; + reg = <0x80 0x80>; interrupt-parent = <&PIC>; - interrupts = <d 1>; + interrupts = <13 1>; }; cpm@9c0 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc885-cpm", "fsl,cpm1"; - command-proc = <9c0>; + command-proc = <0x9c0>; interrupts = <0>; // cpm error interrupt interrupt-parent = <&CPM_PIC>; - reg = <9c0 40>; + reg = <0x9c0 0x40>; ranges; muram@2000 { #address-cells = <1>; #size-cells = <1>; - ranges = <0 2000 2000>; + ranges = <0x0 0x2000 0x2000>; data@0 { compatible = "fsl,cpm-muram-data"; - reg = <0 1c00>; + reg = <0x0 0x1c00>; }; }; @@ -160,7 +161,7 @@ compatible = "fsl,mpc885-brg", "fsl,cpm1-brg", "fsl,cpm-brg"; - reg = <9f0 10>; + reg = <0x9f0 0x10>; }; CPM_PIC: interrupt-controller@930 { @@ -168,7 +169,7 @@ #interrupt-cells = <1>; interrupts = <5 2 0 2>; interrupt-parent = <&PIC>; - reg = <930 20>; + reg = <0x930 0x20>; compatible = "fsl,mpc885-cpm-pic", "fsl,cpm1-pic"; }; @@ -178,11 +179,11 @@ device_type = "serial"; compatible = "fsl,mpc885-smc-uart", "fsl,cpm1-smc-uart"; - reg = <a80 10 3e80 40>; + reg = <0xa80 0x10 0x3e80 0x40>; interrupts = <4>; interrupt-parent = <&CPM_PIC>; fsl,cpm-brg = <1>; - fsl,cpm-command = <0090>; + fsl,cpm-command = <0x90>; linux,planetcore-label = "SMC1"; }; @@ -191,11 +192,11 @@ device_type = "serial"; compatible = "fsl,mpc885-scc-uart", "fsl,cpm1-scc-uart"; - reg = <a20 20 3d00 80>; - interrupts = <1d>; + reg = <0xa20 0x20 0x3d00 0x80>; + interrupts = <29>; interrupt-parent = <&CPM_PIC>; fsl,cpm-brg = <2>; - fsl,cpm-command = <0040>; + fsl,cpm-command = <0x40>; linux,planetcore-label = "SCC2"; }; @@ -204,9 +205,9 @@ #size-cells = <0>; compatible = "fsl,mpc885-usb", "fsl,cpm1-usb"; - reg = <a00 18 1c00 80>; + reg = <0xa00 0x18 0x1c00 0x80>; interrupt-parent = <&CPM_PIC>; - interrupts = <1e>; + interrupts = <30>; fsl,cpm-command = <0000>; }; }; diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts new file mode 100644 index 000000000000..0f2fc077d8db --- /dev/null +++ b/arch/powerpc/boot/dts/glacier.dts @@ -0,0 +1,504 @@ +/* + * Device Tree Source for AMCC Glacier (460GT) + * + * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,glacier"; + compatible = "amcc,glacier", "amcc,canyonlands"; + dcr-parent = <&/cpus/cpu@0>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + ethernet2 = &EMAC2; + ethernet3 = &EMAC3; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,460GT"; + reg = <0>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <20>; + d-cache-line-size = <20>; + i-cache-size = <8000>; + d-cache-size = <8000>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0d0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1e 4 1f 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0e0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <a 4 b 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0f0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <10 4 11 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-460gt"; + dcr-reg = <00e 002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-460gt"; + dcr-reg = <00c 002>; + }; + + plb { + compatible = "ibm,plb-460gt", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: sdram { + compatible = "ibm,sdram-460gt", "ibm,sdram-405gp"; + dcr-reg = <010 2>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-460gt", "ibm,mcmal2"; + dcr-reg = <180 62>; + num-tx-chans = <4>; + num-rx-chans = <20>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-parent = <&UIC2>; + interrupts = < /*TXEOB*/ 6 4 + /*RXEOB*/ 7 4 + /*SERR*/ 3 4 + /*TXDE*/ 4 4 + /*RXDE*/ 5 4>; + desc-base-addr-high = <8>; + }; + + POB0: opb { + compatible = "ibm,opb-460gt", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <b0000000 4 b0000000 50000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-460gt", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + interrupts = <6 4>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl512n", "cfi-flash"; + bank-width = <2>; + reg = <0 000000 4000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0 1e0000>; + }; + partition@1e0000 { + label = "dtb"; + reg = <1e0000 20000>; + }; + partition@200000 { + label = "ramdisk"; + reg = <200000 1400000>; + }; + partition@1600000 { + label = "jffs2"; + reg = <1600000 400000>; + }; + partition@1a00000 { + label = "user"; + reg = <1a00000 2560000>; + }; + partition@3f60000 { + label = "env"; + reg = <3f60000 40000>; + }; + partition@3fa0000 { + label = "u-boot"; + reg = <3fa0000 60000>; + }; + }; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600300 8>; + virtual-reg = <ef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <1 4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600400 8>; + virtual-reg = <ef600400>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + UART2: serial@ef600500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600500 8>; + virtual-reg = <ef600500>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <1d 4>; + }; + + UART3: serial@ef600600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600600 8>; + virtual-reg = <ef600600>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <1e 4>; + }; + + IIC0: i2c@ef600700 { + compatible = "ibm,iic-460gt", "ibm,iic"; + reg = <ef600700 14>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + + IIC1: i2c@ef600800 { + compatible = "ibm,iic-460gt", "ibm,iic"; + reg = <ef600800 14>; + interrupt-parent = <&UIC0>; + interrupts = <3 4>; + }; + + ZMII0: emac-zmii@ef600d00 { + compatible = "ibm,zmii-460gt", "ibm,zmii"; + reg = <ef600d00 c>; + }; + + RGMII0: emac-rgmii@ef601500 { + compatible = "ibm,rgmii-460gt", "ibm,rgmii"; + reg = <ef601500 8>; + has-mdio; + }; + + RGMII1: emac-rgmii@ef601600 { + compatible = "ibm,rgmii-460gt", "ibm,rgmii"; + reg = <ef601600 8>; + has-mdio; + }; + + TAH0: emac-tah@ef601350 { + compatible = "ibm,tah-460gt", "ibm,tah"; + reg = <ef601350 30>; + }; + + TAH1: emac-tah@ef601450 { + compatible = "ibm,tah-460gt", "ibm,tah"; + reg = <ef601450 30>; + }; + + EMAC0: ethernet@ef600e00 { + device_type = "network"; + compatible = "ibm,emac-460gt", "ibm,emac4"; + interrupt-parent = <&EMAC0>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC2 10 4 + /*Wake*/ 1 &UIC2 14 4>; + reg = <ef600e00 70>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <2328>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + tah-device = <&TAH0>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@ef600f00 { + device_type = "network"; + compatible = "ibm,emac-460gt", "ibm,emac4"; + interrupt-parent = <&EMAC1>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC2 11 4 + /*Wake*/ 1 &UIC2 15 4>; + reg = <ef600f00 70>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <8>; + cell-index = <1>; + max-frame-size = <2328>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + tah-device = <&TAH1>; + tah-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + + EMAC2: ethernet@ef601100 { + device_type = "network"; + compatible = "ibm,emac-460gt", "ibm,emac4"; + interrupt-parent = <&EMAC2>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC2 12 4 + /*Wake*/ 1 &UIC2 16 4>; + reg = <ef601100 70>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <2>; + mal-rx-channel = <10>; + cell-index = <2>; + max-frame-size = <2328>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <00000000>; + rgmii-device = <&RGMII1>; + rgmii-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + + EMAC3: ethernet@ef601200 { + device_type = "network"; + compatible = "ibm,emac-460gt", "ibm,emac4"; + interrupt-parent = <&EMAC3>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC2 13 4 + /*Wake*/ 1 &UIC2 17 4>; + reg = <ef601200 70>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <3>; + mal-rx-channel = <18>; + cell-index = <3>; + max-frame-size = <2328>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <00000000>; + rgmii-device = <&RGMII1>; + rgmii-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + }; + + PCIX0: pci@c0ec00000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pcix-460gt", "ibm,plb-pcix"; + primary; + large-inbound-windows; + enable-msi-hole; + reg = <c 0ec00000 8 /* Config space access */ + 0 0 0 /* no IACK cycles */ + c 0ed00000 4 /* Special cycles */ + c 0ec80000 100 /* Internal registers */ + c 0ec80100 fc>; /* Internal messaging registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 0000000d 80000000 0 80000000 + 01000000 0 00000000 0000000c 08000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* This drives busses 0 to 0x3f */ + bus-range = <0 3f>; + + /* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */ + interrupt-map-mask = <0000 0 0 0>; + interrupt-map = < 0000 0 0 0 &UIC1 0 8 >; + }; + + PCIE0: pciex@d00000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; + primary; + port = <0>; /* port number */ + reg = <d 00000000 20000000 /* Config space access */ + c 08010000 00001000>; /* Registers */ + dcr-reg = <100 020>; + sdr-base = <300>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 0000000e 00000000 0 80000000 + 01000000 0 00000000 0000000f 80000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* This drives busses 40 to 0x7f */ + bus-range = <40 7f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0000 0 0 7>; + interrupt-map = < + 0000 0 0 1 &UIC3 c 4 /* swizzled int A */ + 0000 0 0 2 &UIC3 d 4 /* swizzled int B */ + 0000 0 0 3 &UIC3 e 4 /* swizzled int C */ + 0000 0 0 4 &UIC3 f 4 /* swizzled int D */>; + }; + + PCIE1: pciex@d20000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; + primary; + port = <1>; /* port number */ + reg = <d 20000000 20000000 /* Config space access */ + c 08011000 00001000>; /* Registers */ + dcr-reg = <120 020>; + sdr-base = <340>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 0000000e 80000000 0 80000000 + 01000000 0 00000000 0000000f 80010000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* This drives busses 80 to 0xbf */ + bus-range = <80 bf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0000 0 0 7>; + interrupt-map = < + 0000 0 0 1 &UIC3 10 4 /* swizzled int A */ + 0000 0 0 2 &UIC3 11 4 /* swizzled int B */ + 0000 0 0 3 &UIC3 12 4 /* swizzled int C */ + 0000 0 0 4 &UIC3 13 4 /* swizzled int D */>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/haleakala.dts b/arch/powerpc/boot/dts/haleakala.dts index 5dd3d15f0feb..b5d95ac24dbf 100644 --- a/arch/powerpc/boot/dts/haleakala.dts +++ b/arch/powerpc/boot/dts/haleakala.dts @@ -12,7 +12,7 @@ #address-cells = <1>; #size-cells = <1>; model = "amcc,haleakala"; - compatible = "amcc,kilauea"; + compatible = "amcc,haleakala", "amcc,kilauea"; dcr-parent = <&/cpus/cpu@0>; aliases { @@ -218,7 +218,7 @@ mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; @@ -235,7 +235,7 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - compatible = "ibm,plb-pciex-405exr", "ibm,plb-pciex"; + compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; primary; port = <0>; /* port number */ reg = <a0000000 20000000 /* Config space access */ diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts index bc32ac7250ec..cc2873a531d2 100644 --- a/arch/powerpc/boot/dts/katmai.dts +++ b/arch/powerpc/boot/dts/katmai.dts @@ -38,8 +38,8 @@ timebase-frequency = <0>; /* Filled in by zImage */ i-cache-line-size = <20>; d-cache-line-size = <20>; - i-cache-size = <20000>; - d-cache-size = <20000>; + i-cache-size = <8000>; + d-cache-size = <8000>; dcr-controller; dcr-access-method = "native"; }; @@ -136,11 +136,11 @@ }; POB0: opb { - compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb"; + compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb"; #address-cells = <1>; #size-cells = <1>; - ranges = <00000000 4 e0000000 20000000>; - clock-frequency = <0>; /* Filled in by zImage */ + ranges = <00000000 4 e0000000 20000000>; + clock-frequency = <0>; /* Filled in by zImage */ EBC0: ebc { compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc"; @@ -153,38 +153,38 @@ }; UART0: serial@10000200 { - device_type = "serial"; - compatible = "ns16550"; - reg = <10000200 8>; + device_type = "serial"; + compatible = "ns16550"; + reg = <10000200 8>; virtual-reg = <a0000200>; - clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <1c200>; - interrupt-parent = <&UIC0>; - interrupts = <0 4>; - }; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <1c200>; + interrupt-parent = <&UIC0>; + interrupts = <0 4>; + }; UART1: serial@10000300 { - device_type = "serial"; - compatible = "ns16550"; - reg = <10000300 8>; + device_type = "serial"; + compatible = "ns16550"; + reg = <10000300 8>; virtual-reg = <a0000300>; - clock-frequency = <0>; - current-speed = <0>; - interrupt-parent = <&UIC0>; - interrupts = <1 4>; - }; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; UART2: serial@10000600 { - device_type = "serial"; - compatible = "ns16550"; - reg = <10000600 8>; + device_type = "serial"; + compatible = "ns16550"; + reg = <10000600 8>; virtual-reg = <a0000600>; - clock-frequency = <0>; - current-speed = <0>; - interrupt-parent = <&UIC1>; - interrupts = <5 4>; - }; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC1>; + interrupts = <5 4>; + }; IIC0: i2c@10000400 { compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; @@ -212,7 +212,7 @@ mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "gmii"; diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts index 8baef61f31cd..48c9a6e71f1a 100644 --- a/arch/powerpc/boot/dts/kilauea.dts +++ b/arch/powerpc/boot/dts/kilauea.dts @@ -219,7 +219,7 @@ mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; @@ -247,7 +247,7 @@ mal-tx-channel = <1>; mal-rx-channel = <1>; cell-index = <1>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; diff --git a/arch/powerpc/boot/dts/ksi8560.dts b/arch/powerpc/boot/dts/ksi8560.dts new file mode 100644 index 000000000000..f869ce3ca0b7 --- /dev/null +++ b/arch/powerpc/boot/dts/ksi8560.dts @@ -0,0 +1,267 @@ +/* + * Device Tree Source for Emerson KSI8560 + * + * Author: Alexandr Smirnov <asmirnov@ru.mvista.com> + * + * Based on mpc8560ads.dts + * + * 2008 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + */ + +/dts-v1/; + +/ { + model = "KSI8560"; + compatible = "emerson,KSI8560"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8560@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x8000>; /* L1, 32K */ + i-cache-size = <0x8000>; /* L1, 32K */ + timebase-frequency = <0>; /* From U-boot */ + bus-frequency = <0>; /* From U-boot */ + clock-frequency = <0>; /* From U-boot */ + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; /* Fixed by bootwrapper */ + }; + + soc@fdf00000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x00000000 0xfdf00000 0x00100000>; + bus-frequency = <0>; /* Fixed by bootwrapper */ + + memory-controller@2000 { + compatible = "fsl,8540-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&MPIC>; + interrupts = <0x12 0x2>; + }; + + l2-cache-controller@20000 { + compatible = "fsl,8540-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <0x20>; /* 32 bytes */ + cache-size = <0x40000>; /* L2, 256K */ + interrupt-parent = <&MPIC>; + interrupts = <0x10 0x2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <0x2b 0x2>; + interrupt-parent = <&MPIC>; + dfsrr; + }; + + mdio@24520 { /* For TSECs */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + + PHY1: ethernet-phy@1 { + interrupt-parent = <&MPIC>; + reg = <0x1>; + device_type = "ethernet-phy"; + }; + + PHY2: ethernet-phy@2 { + interrupt-parent = <&MPIC>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + }; + + enet0: ethernet@24000 { + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + /* Mac address filled in by bootwrapper */ + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; + interrupt-parent = <&MPIC>; + phy-handle = <&PHY1>; + }; + + enet1: ethernet@25000 { + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + /* Mac address filled in by bootwrapper */ + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>; + interrupt-parent = <&MPIC>; + phy-handle = <&PHY2>; + }; + + MPIC: pic@40000 { + #address-cells = <0>; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0x40000 0x40000>; + device_type = "open-pic"; + }; + + cpm@919c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8560-cpm", "fsl,cpm2"; + reg = <0x919c0 0x30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0x0 0x4000 0x9000 0x2000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8560-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x919f0 0x10 0x915f0 0x10>; + clock-frequency = <165000000>; /* 166MHz */ + }; + + CPMPIC: pic@90c00 { + #address-cells = <0>; + #interrupt-cells = <2>; + interrupt-controller; + interrupts = <0x2e 0x2>; + interrupt-parent = <&MPIC>; + reg = <0x90c00 0x80>; + compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic"; + }; + + serial@91a00 { + device_type = "serial"; + compatible = "fsl,mpc8560-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <0x91a00 0x20 0x88000 0x100>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x800000>; + current-speed = <0x1c200>; + interrupts = <0x28 0x8>; + interrupt-parent = <&CPMPIC>; + }; + + serial@91a20 { + device_type = "serial"; + compatible = "fsl,mpc8560-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <0x91a20 0x20 0x88100 0x100>; + fsl,cpm-brg = <2>; + fsl,cpm-command = <0x4a00000>; + current-speed = <0x1c200>; + interrupts = <0x29 0x8>; + interrupt-parent = <&CPMPIC>; + }; + + mdio@90d00 { /* For FCCs */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,cpm2-mdio-bitbang"; + reg = <0x90d00 0x14>; + fsl,mdio-pin = <24>; + fsl,mdc-pin = <25>; + + PHY0: ethernet-phy@0 { + interrupt-parent = <&MPIC>; + reg = <0x0>; + device_type = "ethernet-phy"; + }; + }; + + enet2: ethernet@91300 { + device_type = "network"; + compatible = "fsl,mpc8560-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <0x91300 0x20 0x88400 0x100 0x91390 0x1>; + /* Mac address filled in by bootwrapper */ + local-mac-address = [ 00 00 00 00 00 00 ]; + fsl,cpm-command = <0x12000300>; + interrupts = <0x20 0x8>; + interrupt-parent = <&CPMPIC>; + phy-handle = <&PHY0>; + }; + }; + }; + + localbus@fdf05000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8560-localbus"; + reg = <0xfdf05000 0x68>; + + ranges = <0x0 0x0 0xe0000000 0x00800000 + 0x4 0x0 0xe8080000 0x00080000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <0x2>; + + partition@0 { + label = "Primary Kernel"; + reg = <0x0 0x180000>; + }; + partition@180000 { + label = "Primary Filesystem"; + reg = <0x180000 0x580000>; + }; + partition@700000 { + label = "Monitor"; + reg = <0x300000 0x100000>; + read-only; + }; + }; + + cpld@4,0 { + compatible = "emerson,KSI8560-cpld"; + reg = <0x4 0x0 0x80000>; + }; + }; + + + chosen { + linux,stdout-path = "/soc/cpm/serial@91a00"; + }; +}; diff --git a/arch/powerpc/boot/dts/kuroboxHD.dts b/arch/powerpc/boot/dts/kuroboxHD.dts index 446958854519..2e5a1a1812b6 100644 --- a/arch/powerpc/boot/dts/kuroboxHD.dts +++ b/arch/powerpc/boot/dts/kuroboxHD.dts @@ -7,6 +7,7 @@ * Based on sandpoint.dts * * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de> + * Copyright 2008 Freescale Semiconductor, Inc. * * This file is licensed under * the terms of the GNU General Public License version 2. This program @@ -17,6 +18,8 @@ XXXX add flash parts, rtc, ?? */ +/dts-v1/; + / { model = "KuroboxHD"; compatible = "linkstation"; @@ -35,19 +38,19 @@ XXXX add flash parts, rtc, ?? PowerPC,603e { /* Really 8241 */ device_type = "cpu"; - reg = <0>; - clock-frequency = <bebc200>; /* Fixed by bootloader */ - timebase-frequency = <1743000>; /* Fixed by bootloader */ + reg = <0x0>; + clock-frequency = <200000000>; /* Fixed by bootloader */ + timebase-frequency = <24391680>; /* Fixed by bootloader */ bus-frequency = <0>; /* Fixed by bootloader */ /* Following required by dtc but not used */ - i-cache-size = <4000>; - d-cache-size = <4000>; + i-cache-size = <0x4000>; + d-cache-size = <0x4000>; }; }; memory { device_type = "memory"; - reg = <00000000 04000000>; + reg = <0x0 0x4000000>; }; soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */ @@ -56,26 +59,26 @@ XXXX add flash parts, rtc, ?? device_type = "soc"; compatible = "mpc10x"; store-gathering = <0>; /* 0 == off, !0 == on */ - reg = <80000000 00100000>; - ranges = <80000000 80000000 70000000 /* pci mem space */ - fc000000 fc000000 00100000 /* EUMB */ - fe000000 fe000000 00c00000 /* pci i/o space */ - fec00000 fec00000 00300000 /* pci cfg regs */ - fef00000 fef00000 00100000>; /* pci iack */ + reg = <0x80000000 0x100000>; + ranges = <0x80000000 0x80000000 0x70000000 /* pci mem space */ + 0xfc000000 0xfc000000 0x100000 /* EUMB */ + 0xfe000000 0xfe000000 0xc00000 /* pci i/o space */ + 0xfec00000 0xfec00000 0x300000 /* pci cfg regs */ + 0xfef00000 0xfef00000 0x100000>; /* pci iack */ i2c@80003000 { #address-cells = <1>; #size-cells = <0>; cell-index = <0>; compatible = "fsl-i2c"; - reg = <80003000 1000>; + reg = <0x80003000 0x1000>; interrupts = <5 2>; interrupt-parent = <&mpic>; rtc@32 { device_type = "rtc"; compatible = "ricoh,rs5c372a"; - reg = <32>; + reg = <0x32>; }; }; @@ -83,9 +86,9 @@ XXXX add flash parts, rtc, ?? cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <80004500 8>; - clock-frequency = <5d08d88>; - current-speed = <2580>; + reg = <0x80004500 0x8>; + clock-frequency = <97553800>; + current-speed = <9600>; interrupts = <9 0>; interrupt-parent = <&mpic>; }; @@ -94,10 +97,10 @@ XXXX add flash parts, rtc, ?? cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <80004600 8>; - clock-frequency = <5d08d88>; - current-speed = <e100>; - interrupts = <a 0>; + reg = <0x80004600 0x8>; + clock-frequency = <97553800>; + current-speed = <57600>; + interrupts = <10 0>; interrupt-parent = <&mpic>; }; @@ -107,7 +110,7 @@ XXXX add flash parts, rtc, ?? device_type = "open-pic"; compatible = "chrp,open-pic"; interrupt-controller; - reg = <80040000 40000>; + reg = <0x80040000 0x40000>; }; pci0: pci@fec00000 { @@ -116,29 +119,29 @@ XXXX add flash parts, rtc, ?? #interrupt-cells = <1>; device_type = "pci"; compatible = "mpc10x-pci"; - reg = <fec00000 400000>; - ranges = <01000000 0 0 fe000000 0 00c00000 - 02000000 0 80000000 80000000 0 70000000>; - bus-range = <0 ff>; - clock-frequency = <7f28155>; + reg = <0xfec00000 0x400000>; + ranges = <0x1000000 0x0 0x0 0xfe000000 0x0 0xc00000 + 0x2000000 0x0 0x80000000 0x80000000 0x0 0x70000000>; + bus-range = <0 255>; + clock-frequency = <133333333>; interrupt-parent = <&mpic>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 11 - IRQ0 ETH */ - 5800 0 0 1 &mpic 0 1 - 5800 0 0 2 &mpic 1 1 - 5800 0 0 3 &mpic 2 1 - 5800 0 0 4 &mpic 3 1 + 0x5800 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x5800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x5800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x5800 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 12 - IRQ1 IDE0 */ - 6000 0 0 1 &mpic 1 1 - 6000 0 0 2 &mpic 2 1 - 6000 0 0 3 &mpic 3 1 - 6000 0 0 4 &mpic 0 1 + 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x6000 0x0 0x0 0x4 &mpic 0x0 0x1 /* IDSEL 14 - IRQ3 USB2.0 */ - 7000 0 0 1 &mpic 3 1 - 7000 0 0 2 &mpic 3 1 - 7000 0 0 3 &mpic 3 1 - 7000 0 0 4 &mpic 3 1 + 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x4 &mpic 0x3 0x1 >; }; }; diff --git a/arch/powerpc/boot/dts/kuroboxHG.dts b/arch/powerpc/boot/dts/kuroboxHG.dts index 8443c85b7b30..e4916e69ad31 100644 --- a/arch/powerpc/boot/dts/kuroboxHG.dts +++ b/arch/powerpc/boot/dts/kuroboxHG.dts @@ -7,6 +7,7 @@ * Based on sandpoint.dts * * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de> + * Copyright 2008 Freescale Semiconductor, Inc. * * This file is licensed under * the terms of the GNU General Public License version 2. This program @@ -17,6 +18,8 @@ XXXX add flash parts, rtc, ?? */ +/dts-v1/; + / { model = "KuroboxHG"; compatible = "linkstation"; @@ -35,19 +38,19 @@ XXXX add flash parts, rtc, ?? PowerPC,603e { /* Really 8241 */ device_type = "cpu"; - reg = <0>; - clock-frequency = <fdad680>; /* Fixed by bootloader */ - timebase-frequency = <1F04000>; /* Fixed by bootloader */ + reg = <0x0>; + clock-frequency = <266000000>; /* Fixed by bootloader */ + timebase-frequency = <32522240>; /* Fixed by bootloader */ bus-frequency = <0>; /* Fixed by bootloader */ /* Following required by dtc but not used */ - i-cache-size = <4000>; - d-cache-size = <4000>; + i-cache-size = <0x4000>; + d-cache-size = <0x4000>; }; }; memory { device_type = "memory"; - reg = <00000000 08000000>; + reg = <0x0 0x8000000>; }; soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */ @@ -56,26 +59,26 @@ XXXX add flash parts, rtc, ?? device_type = "soc"; compatible = "mpc10x"; store-gathering = <0>; /* 0 == off, !0 == on */ - reg = <80000000 00100000>; - ranges = <80000000 80000000 70000000 /* pci mem space */ - fc000000 fc000000 00100000 /* EUMB */ - fe000000 fe000000 00c00000 /* pci i/o space */ - fec00000 fec00000 00300000 /* pci cfg regs */ - fef00000 fef00000 00100000>; /* pci iack */ + reg = <0x80000000 0x100000>; + ranges = <0x80000000 0x80000000 0x70000000 /* pci mem space */ + 0xfc000000 0xfc000000 0x100000 /* EUMB */ + 0xfe000000 0xfe000000 0xc00000 /* pci i/o space */ + 0xfec00000 0xfec00000 0x300000 /* pci cfg regs */ + 0xfef00000 0xfef00000 0x100000>; /* pci iack */ i2c@80003000 { #address-cells = <1>; #size-cells = <0>; cell-index = <0>; compatible = "fsl-i2c"; - reg = <80003000 1000>; + reg = <0x80003000 0x1000>; interrupts = <5 2>; interrupt-parent = <&mpic>; rtc@32 { device_type = "rtc"; compatible = "ricoh,rs5c372a"; - reg = <32>; + reg = <0x32>; }; }; @@ -83,9 +86,9 @@ XXXX add flash parts, rtc, ?? cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <80004500 8>; - clock-frequency = <7c044a8>; - current-speed = <2580>; + reg = <0x80004500 0x8>; + clock-frequency = <130041000>; + current-speed = <9600>; interrupts = <9 0>; interrupt-parent = <&mpic>; }; @@ -94,10 +97,10 @@ XXXX add flash parts, rtc, ?? cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <80004600 8>; - clock-frequency = <7c044a8>; - current-speed = <e100>; - interrupts = <a 0>; + reg = <0x80004600 0x8>; + clock-frequency = <130041000>; + current-speed = <57600>; + interrupts = <10 0>; interrupt-parent = <&mpic>; }; @@ -107,7 +110,7 @@ XXXX add flash parts, rtc, ?? device_type = "open-pic"; compatible = "chrp,open-pic"; interrupt-controller; - reg = <80040000 40000>; + reg = <0x80040000 0x40000>; }; pci0: pci@fec00000 { @@ -116,29 +119,29 @@ XXXX add flash parts, rtc, ?? #interrupt-cells = <1>; device_type = "pci"; compatible = "mpc10x-pci"; - reg = <fec00000 400000>; - ranges = <01000000 0 0 fe000000 0 00c00000 - 02000000 0 80000000 80000000 0 70000000>; - bus-range = <0 ff>; - clock-frequency = <7f28155>; + reg = <0xfec00000 0x400000>; + ranges = <0x1000000 0x0 0x0 0xfe000000 0x0 0xc00000 + 0x2000000 0x0 0x80000000 0x80000000 0x0 0x70000000>; + bus-range = <0 255>; + clock-frequency = <133333333>; interrupt-parent = <&mpic>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 11 - IRQ0 ETH */ - 5800 0 0 1 &mpic 0 1 - 5800 0 0 2 &mpic 1 1 - 5800 0 0 3 &mpic 2 1 - 5800 0 0 4 &mpic 3 1 + 0x5800 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x5800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x5800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x5800 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 12 - IRQ1 IDE0 */ - 6000 0 0 1 &mpic 1 1 - 6000 0 0 2 &mpic 2 1 - 6000 0 0 3 &mpic 3 1 - 6000 0 0 4 &mpic 0 1 + 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x6000 0x0 0x0 0x4 &mpic 0x0 0x1 /* IDSEL 14 - IRQ3 USB2.0 */ - 7000 0 0 1 &mpic 3 1 - 7000 0 0 2 &mpic 3 1 - 7000 0 0 3 &mpic 3 1 - 7000 0 0 4 &mpic 3 1 + 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x4 &mpic 0x3 0x1 >; }; }; diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts index 0d701c1bf539..09b4e16154d6 100644 --- a/arch/powerpc/boot/dts/lite5200.dts +++ b/arch/powerpc/boot/dts/lite5200.dts @@ -258,6 +258,21 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-mdio"; + reg = <3000 400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + interrupt-parent = <&mpc5200_pic>; + + phy0:ethernet-phy@1 { + device_type = "ethernet-phy"; + reg = <1>; + }; }; ata@3a00 { diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts index 571ba02accac..2e9bc397ae9a 100644 --- a/arch/powerpc/boot/dts/lite5200b.dts +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -270,7 +270,7 @@ mdio@3000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,mpc5200b-mdio"; + compatible = "fsl,mpc5200b-mdio", "fsl,mpc5200-mdio"; reg = <3000 400>; // fec range, since we need to setup fec interrupts interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. interrupt-parent = <&mpc5200_pic>; diff --git a/arch/powerpc/boot/dts/makalu.dts b/arch/powerpc/boot/dts/makalu.dts index 710c01168179..84cc5e72ddd8 100644 --- a/arch/powerpc/boot/dts/makalu.dts +++ b/arch/powerpc/boot/dts/makalu.dts @@ -219,7 +219,7 @@ mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; @@ -247,7 +247,7 @@ mal-tx-channel = <1>; mal-rx-channel = <1>; cell-index = <1>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts index 76951ab038ee..2b0dde058f8e 100644 --- a/arch/powerpc/boot/dts/motionpro.dts +++ b/arch/powerpc/boot/dts/motionpro.dts @@ -148,7 +148,6 @@ interrupt-parent = <&mpc5200_pic>; }; - spi@f00 { compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; reg = <f00 20>; @@ -209,10 +208,25 @@ ethernet@3000 { device_type = "network"; compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; - reg = <3000 800>; + reg = <3000 400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <3000 400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + interrupt-parent = <&mpc5200_pic>; + + phy0: ethernet-phy@2 { + device_type = "ethernet-phy"; + reg = <2>; + }; }; ata@3a00 { @@ -223,11 +237,19 @@ }; i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <3d40 40>; interrupts = <2 10 0>; interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; + + rtc@68 { + device_type = "rtc"; + compatible = "dallas,ds1339"; + reg = <68>; + }; }; sram@8000 { @@ -240,7 +262,8 @@ compatible = "fsl,lpb"; #address-cells = <2>; #size-cells = <1>; - ranges = <1 0 50000000 00010000 + ranges = <0 0 ff000000 01000000 + 1 0 50000000 00010000 2 0 50010000 00010000 3 0 50020000 00010000>; @@ -271,31 +294,15 @@ compatible = "promess,pro_module_dio"; reg = <3 800 2>; }; - }; - pci@f0000d00 { - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; - reg = <f0000d00 100>; - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot - c000 0 0 2 &mpc5200_pic 1 1 3 - c000 0 0 3 &mpc5200_pic 1 2 3 - c000 0 0 4 &mpc5200_pic 1 3 3 - - c800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot - c800 0 0 2 &mpc5200_pic 1 2 3 - c800 0 0 3 &mpc5200_pic 1 3 3 - c800 0 0 4 &mpc5200_pic 0 0 3>; - clock-frequency = <0>; // From boot loader - interrupts = <2 8 0 2 9 0 2 a 0>; - interrupt-parent = <&mpc5200_pic>; - bus-range = <0 0>; - ranges = <42000000 0 80000000 80000000 0 20000000 - 02000000 0 a0000000 a0000000 0 10000000 - 01000000 0 00000000 b0000000 0 01000000>; + // 16-bit flash device at LocalPlus Bus CS0 + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 01000000>; + bank-width = <2>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; }; }; diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts index 8fb542387436..4936349b87cd 100644 --- a/arch/powerpc/boot/dts/mpc7448hpc2.dts +++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts @@ -1,7 +1,7 @@ /* * MPC7448HPC2 (Taiga) board Device Tree Source * - * Copyright 2006 Freescale Semiconductor Inc. + * Copyright 2006, 2008 Freescale Semiconductor Inc. * 2006 Roy Zang <Roy Zang at freescale.com>. * * This program is free software; you can redistribute it and/or modify it @@ -10,6 +10,7 @@ * option) any later version. */ +/dts-v1/; / { model = "mpc7448hpc2"; @@ -23,11 +24,11 @@ PowerPC,7448@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K bytes - i-cache-size = <8000>; // L1, 32K bytes + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K bytes + i-cache-size = <0x8000>; // L1, 32K bytes timebase-frequency = <0>; // 33 MHz, from uboot clock-frequency = <0>; // From U-Boot bus-frequency = <0>; // From U-Boot @@ -36,7 +37,7 @@ memory { device_type = "memory"; - reg = <00000000 20000000 // DDR2 512M at 0 + reg = <0x0 0x20000000 // DDR2 512M at 0 >; }; @@ -44,14 +45,14 @@ #address-cells = <1>; #size-cells = <1>; device_type = "tsi-bridge"; - ranges = <00000000 c0000000 00010000>; - reg = <c0000000 00010000>; + ranges = <0x0 0xc0000000 0x10000>; + reg = <0xc0000000 0x10000>; bus-frequency = <0>; i2c@7000 { interrupt-parent = <&mpic>; - interrupts = <E 0>; - reg = <7000 400>; + interrupts = <14 0>; + reg = <0x7000 0x400>; device_type = "i2c"; compatible = "tsi108-i2c"; }; @@ -59,20 +60,20 @@ MDIO: mdio@6000 { device_type = "mdio"; compatible = "tsi108-mdio"; - reg = <6000 50>; + reg = <0x6000 0x50>; #address-cells = <1>; #size-cells = <0>; phy8: ethernet-phy@8 { interrupt-parent = <&mpic>; interrupts = <2 1>; - reg = <8>; + reg = <0x8>; }; phy9: ethernet-phy@9 { interrupt-parent = <&mpic>; interrupts = <2 1>; - reg = <9>; + reg = <0x9>; }; }; @@ -82,9 +83,9 @@ #size-cells = <0>; device_type = "network"; compatible = "tsi108-ethernet"; - reg = <6000 200>; + reg = <0x6000 0x200>; address = [ 00 06 D2 00 00 01 ]; - interrupts = <10 2>; + interrupts = <16 2>; interrupt-parent = <&mpic>; mdio-handle = <&MDIO>; phy-handle = <&phy8>; @@ -96,9 +97,9 @@ #size-cells = <0>; device_type = "network"; compatible = "tsi108-ethernet"; - reg = <6400 200>; + reg = <0x6400 0x200>; address = [ 00 06 D2 00 00 02 ]; - interrupts = <11 2>; + interrupts = <17 2>; interrupt-parent = <&mpic>; mdio-handle = <&MDIO>; phy-handle = <&phy9>; @@ -107,18 +108,18 @@ serial@7808 { device_type = "serial"; compatible = "ns16550"; - reg = <7808 200>; - clock-frequency = <3f6b5a00>; - interrupts = <c 0>; + reg = <0x7808 0x200>; + clock-frequency = <1064000000>; + interrupts = <12 0>; interrupt-parent = <&mpic>; }; serial@7c08 { device_type = "serial"; compatible = "ns16550"; - reg = <7c08 200>; - clock-frequency = <3f6b5a00>; - interrupts = <d 0>; + reg = <0x7c08 0x200>; + clock-frequency = <1064000000>; + interrupts = <13 0>; interrupt-parent = <&mpic>; }; @@ -127,7 +128,7 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <7400 400>; + reg = <0x7400 0x400>; compatible = "chrp,open-pic"; device_type = "open-pic"; big-endian; @@ -138,39 +139,39 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <1000 1000>; + reg = <0x1000 0x1000>; bus-range = <0 0>; - ranges = <02000000 0 e0000000 e0000000 0 1A000000 - 01000000 0 00000000 fa000000 0 00010000>; - clock-frequency = <7f28154>; + ranges = <0x2000000 0x0 0xe0000000 0xe0000000 0x0 0x1a000000 + 0x1000000 0x0 0x0 0xfa000000 0x0 0x10000>; + clock-frequency = <133333332>; interrupt-parent = <&mpic>; - interrupts = <17 2>; - interrupt-map-mask = <f800 0 0 7>; + interrupts = <23 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x11 */ - 0800 0 0 1 &RT0 24 0 - 0800 0 0 2 &RT0 25 0 - 0800 0 0 3 &RT0 26 0 - 0800 0 0 4 &RT0 27 0 + 0x800 0x0 0x0 0x1 &RT0 0x24 0x0 + 0x800 0x0 0x0 0x2 &RT0 0x25 0x0 + 0x800 0x0 0x0 0x3 &RT0 0x26 0x0 + 0x800 0x0 0x0 0x4 &RT0 0x27 0x0 /* IDSEL 0x12 */ - 1000 0 0 1 &RT0 25 0 - 1000 0 0 2 &RT0 26 0 - 1000 0 0 3 &RT0 27 0 - 1000 0 0 4 &RT0 24 0 + 0x1000 0x0 0x0 0x1 &RT0 0x25 0x0 + 0x1000 0x0 0x0 0x2 &RT0 0x26 0x0 + 0x1000 0x0 0x0 0x3 &RT0 0x27 0x0 + 0x1000 0x0 0x0 0x4 &RT0 0x24 0x0 /* IDSEL 0x13 */ - 1800 0 0 1 &RT0 26 0 - 1800 0 0 2 &RT0 27 0 - 1800 0 0 3 &RT0 24 0 - 1800 0 0 4 &RT0 25 0 + 0x1800 0x0 0x0 0x1 &RT0 0x26 0x0 + 0x1800 0x0 0x0 0x2 &RT0 0x27 0x0 + 0x1800 0x0 0x0 0x3 &RT0 0x24 0x0 + 0x1800 0x0 0x0 0x4 &RT0 0x25 0x0 /* IDSEL 0x14 */ - 2000 0 0 1 &RT0 27 0 - 2000 0 0 2 &RT0 24 0 - 2000 0 0 3 &RT0 25 0 - 2000 0 0 4 &RT0 26 0 + 0x2000 0x0 0x0 0x1 &RT0 0x27 0x0 + 0x2000 0x0 0x0 0x2 &RT0 0x24 0x0 + 0x2000 0x0 0x0 0x3 &RT0 0x25 0x0 + 0x2000 0x0 0x0 0x4 &RT0 0x26 0x0 >; RT0: router@1180 { @@ -180,7 +181,7 @@ #address-cells = <0>; #interrupt-cells = <2>; big-endian; - interrupts = <17 2>; + interrupts = <23 2>; interrupt-parent = <&mpic>; }; }; diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts index 7285ca1325fd..46e2da30c3dd 100644 --- a/arch/powerpc/boot/dts/mpc8272ads.dts +++ b/arch/powerpc/boot/dts/mpc8272ads.dts @@ -1,7 +1,7 @@ /* * MPC8272 ADS Device Tree Source * - * Copyright 2005 Freescale Semiconductor Inc. + * Copyright 2005,2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,6 +9,8 @@ * option) any later version. */ +/dts-v1/; + / { model = "MPC8272ADS"; compatible = "fsl,mpc8272ads"; @@ -21,11 +23,11 @@ PowerPC,8272@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <d#32>; - i-cache-line-size = <d#32>; - d-cache-size = <d#16384>; - i-cache-size = <d#16384>; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <16384>; + i-cache-size = <16384>; timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; @@ -34,7 +36,7 @@ memory { device_type = "memory"; - reg = <0 0>; + reg = <0x0 0x0>; }; localbus@f0010100 { @@ -42,21 +44,21 @@ "fsl,pq2-localbus"; #address-cells = <2>; #size-cells = <1>; - reg = <f0010100 40>; + reg = <0xf0010100 0x40>; - ranges = <0 0 fe000000 02000000 - 1 0 f4500000 00008000 - 3 0 f8200000 00008000>; + ranges = <0x0 0x0 0xfe000000 0x2000000 + 0x1 0x0 0xf4500000 0x8000 + 0x3 0x0 0xf8200000 0x8000>; flash@0,0 { compatible = "jedec-flash"; - reg = <0 0 2000000>; + reg = <0x0 0x0 0x2000000>; bank-width = <4>; device-width = <1>; }; board-control@1,0 { - reg = <1 0 20>; + reg = <0x1 0x0 0x20>; compatible = "fsl,mpc8272ads-bcsr"; }; @@ -65,46 +67,46 @@ "fsl,pq2ads-pci-pic"; #interrupt-cells = <1>; interrupt-controller; - reg = <3 0 8>; + reg = <0x3 0x0 0x8>; interrupt-parent = <&PIC>; - interrupts = <14 8>; + interrupts = <20 8>; }; }; pci@f0010800 { device_type = "pci"; - reg = <f0010800 10c f00101ac 8 f00101c4 8>; + reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>; compatible = "fsl,mpc8272-pci", "fsl,pq2-pci"; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - clock-frequency = <d#66666666>; - interrupt-map-mask = <f800 0 0 7>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x16 */ - b000 0 0 1 &PCI_PIC 0 - b000 0 0 2 &PCI_PIC 1 - b000 0 0 3 &PCI_PIC 2 - b000 0 0 4 &PCI_PIC 3 + 0xb000 0x0 0x0 0x1 &PCI_PIC 0 + 0xb000 0x0 0x0 0x2 &PCI_PIC 1 + 0xb000 0x0 0x0 0x3 &PCI_PIC 2 + 0xb000 0x0 0x0 0x4 &PCI_PIC 3 /* IDSEL 0x17 */ - b800 0 0 1 &PCI_PIC 4 - b800 0 0 2 &PCI_PIC 5 - b800 0 0 3 &PCI_PIC 6 - b800 0 0 4 &PCI_PIC 7 + 0xb800 0x0 0x0 0x1 &PCI_PIC 4 + 0xb800 0x0 0x0 0x2 &PCI_PIC 5 + 0xb800 0x0 0x0 0x3 &PCI_PIC 6 + 0xb800 0x0 0x0 0x4 &PCI_PIC 7 /* IDSEL 0x18 */ - c000 0 0 1 &PCI_PIC 8 - c000 0 0 2 &PCI_PIC 9 - c000 0 0 3 &PCI_PIC a - c000 0 0 4 &PCI_PIC b>; + 0xc000 0x0 0x0 0x1 &PCI_PIC 8 + 0xc000 0x0 0x0 0x2 &PCI_PIC 9 + 0xc000 0x0 0x0 0x3 &PCI_PIC 10 + 0xc000 0x0 0x0 0x4 &PCI_PIC 11>; interrupt-parent = <&PIC>; - interrupts = <12 8>; - ranges = <42000000 0 80000000 80000000 0 20000000 - 02000000 0 a0000000 a0000000 0 20000000 - 01000000 0 00000000 f6000000 0 02000000>; + interrupts = <18 8>; + ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xf6000000 0x0 0x2000000>; }; soc@f0000000 { @@ -112,26 +114,26 @@ #size-cells = <1>; device_type = "soc"; compatible = "fsl,mpc8272", "fsl,pq2-soc"; - ranges = <00000000 f0000000 00053000>; + ranges = <0x0 0xf0000000 0x53000>; // Temporary -- will go away once kernel uses ranges for get_immrbase(). - reg = <f0000000 00053000>; + reg = <0xf0000000 0x53000>; cpm@119c0 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc8272-cpm", "fsl,cpm2"; - reg = <119c0 30>; + reg = <0x119c0 0x30>; ranges; muram@0 { #address-cells = <1>; #size-cells = <1>; - ranges = <0 0 10000>; + ranges = <0x0 0x0 0x10000>; data@0 { compatible = "fsl,cpm-muram-data"; - reg = <0 2000 9800 800>; + reg = <0x0 0x2000 0x9800 0x800>; }; }; @@ -139,29 +141,29 @@ compatible = "fsl,mpc8272-brg", "fsl,cpm2-brg", "fsl,cpm-brg"; - reg = <119f0 10 115f0 10>; + reg = <0x119f0 0x10 0x115f0 0x10>; }; serial@11a00 { device_type = "serial"; compatible = "fsl,mpc8272-scc-uart", "fsl,cpm2-scc-uart"; - reg = <11a00 20 8000 100>; - interrupts = <28 8>; + reg = <0x11a00 0x20 0x8000 0x100>; + interrupts = <40 8>; interrupt-parent = <&PIC>; fsl,cpm-brg = <1>; - fsl,cpm-command = <00800000>; + fsl,cpm-command = <0x800000>; }; serial@11a60 { device_type = "serial"; compatible = "fsl,mpc8272-scc-uart", "fsl,cpm2-scc-uart"; - reg = <11a60 20 8300 100>; - interrupts = <2b 8>; + reg = <0x11a60 0x20 0x8300 0x100>; + interrupts = <43 8>; interrupt-parent = <&PIC>; fsl,cpm-brg = <4>; - fsl,cpm-command = <0ce00000>; + fsl,cpm-command = <0xce00000>; }; mdio@10d40 { @@ -169,23 +171,23 @@ compatible = "fsl,mpc8272ads-mdio-bitbang", "fsl,mpc8272-mdio-bitbang", "fsl,cpm2-mdio-bitbang"; - reg = <10d40 14>; + reg = <0x10d40 0x14>; #address-cells = <1>; #size-cells = <0>; - fsl,mdio-pin = <12>; - fsl,mdc-pin = <13>; + fsl,mdio-pin = <18>; + fsl,mdc-pin = <19>; PHY0: ethernet-phy@0 { interrupt-parent = <&PIC>; - interrupts = <17 8>; - reg = <0>; + interrupts = <23 8>; + reg = <0x0>; device_type = "ethernet-phy"; }; PHY1: ethernet-phy@1 { interrupt-parent = <&PIC>; - interrupts = <17 8>; - reg = <3>; + interrupts = <23 8>; + reg = <0x3>; device_type = "ethernet-phy"; }; }; @@ -194,33 +196,33 @@ device_type = "network"; compatible = "fsl,mpc8272-fcc-enet", "fsl,cpm2-fcc-enet"; - reg = <11300 20 8400 100 11390 1>; + reg = <0x11300 0x20 0x8400 0x100 0x11390 0x1>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <20 8>; + interrupts = <32 8>; interrupt-parent = <&PIC>; phy-handle = <&PHY0>; linux,network-index = <0>; - fsl,cpm-command = <12000300>; + fsl,cpm-command = <0x12000300>; }; ethernet@11320 { device_type = "network"; compatible = "fsl,mpc8272-fcc-enet", "fsl,cpm2-fcc-enet"; - reg = <11320 20 8500 100 113b0 1>; + reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <21 8>; + interrupts = <33 8>; interrupt-parent = <&PIC>; phy-handle = <&PHY1>; linux,network-index = <1>; - fsl,cpm-command = <16200300>; + fsl,cpm-command = <0x16200300>; }; }; PIC: interrupt-controller@10c00 { #interrupt-cells = <2>; interrupt-controller; - reg = <10c00 80>; + reg = <0x10c00 0x80>; compatible = "fsl,mpc8272-pic", "fsl,cpm2-pic"; }; @@ -232,14 +234,14 @@ "fsl,talitos-sec2", "fsl,talitos", "talitos"; - reg = <30000 10000>; - interrupts = <b 8>; + reg = <0x30000 0x10000>; + interrupts = <11 8>; interrupt-parent = <&PIC>; num-channels = <4>; - channel-fifo-len = <18>; - exec-units-mask = <0000007e>; + channel-fifo-len = <24>; + exec-units-mask = <0x7e>; /* desc mask is for rev1.x, we need runtime fixup for >=2.x */ - descriptor-types-mask = <01010ebf>; + descriptor-types-mask = <0x1010ebf>; }; }; diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts index 9bb408371bcd..539e02fb3526 100644 --- a/arch/powerpc/boot/dts/mpc832x_mds.dts +++ b/arch/powerpc/boot/dts/mpc832x_mds.dts @@ -255,9 +255,7 @@ enet0: ucc@2200 { device_type = "network"; compatible = "ucc_geth"; - model = "UCC"; cell-index = <3>; - device-id = <3>; reg = <0x2200 0x200>; interrupts = <34>; interrupt-parent = <&qeic>; @@ -271,9 +269,7 @@ enet1: ucc@3200 { device_type = "network"; compatible = "ucc_geth"; - model = "UCC"; cell-index = <4>; - device-id = <4>; reg = <0x3200 0x200>; interrupts = <35>; interrupt-parent = <&qeic>; @@ -287,8 +283,7 @@ ucc@2400 { device_type = "serial"; compatible = "ucc_uart"; - model = "UCC"; - device-id = <5>; /* The UCC number, 1-7*/ + cell-index = <5>; /* The UCC number, 1-7*/ port-number = <0>; /* Which ttyQEx device */ soft-uart; /* We need Soft-UART */ reg = <0x2400 0x200>; diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts index 94f93d209de8..179c81c6a7ac 100644 --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts @@ -208,9 +208,7 @@ enet0: ucc@3000 { device_type = "network"; compatible = "ucc_geth"; - model = "UCC"; cell-index = <2>; - device-id = <2>; reg = <0x3000 0x200>; interrupts = <33>; interrupt-parent = <&qeic>; @@ -224,9 +222,7 @@ enet1: ucc@2200 { device_type = "network"; compatible = "ucc_geth"; - model = "UCC"; cell-index = <3>; - device-id = <3>; reg = <0x2200 0x200>; interrupts = <34>; interrupt-parent = <&qeic>; diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts index 55f03e8dc97f..8160ff24e87e 100644 --- a/arch/powerpc/boot/dts/mpc836x_mds.dts +++ b/arch/powerpc/boot/dts/mpc836x_mds.dts @@ -257,9 +257,7 @@ enet0: ucc@2000 { device_type = "network"; compatible = "ucc_geth"; - model = "UCC"; cell-index = <1>; - device-id = <1>; reg = <0x2000 0x200>; interrupts = <32>; interrupt-parent = <&qeic>; @@ -274,9 +272,7 @@ enet1: ucc@3000 { device_type = "network"; compatible = "ucc_geth"; - model = "UCC"; cell-index = <2>; - device-id = <2>; reg = <0x3000 0x200>; interrupts = <33>; interrupt-parent = <&qeic>; diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts index a3637fff73cc..eac8e1b59496 100644 --- a/arch/powerpc/boot/dts/mpc8377_mds.dts +++ b/arch/powerpc/boot/dts/mpc8377_mds.dts @@ -47,6 +47,72 @@ reg = <0x00000000 0x20000000>; // 512MB at 0 }; + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + // booting from NOR flash + ranges = <0 0x0 0xfe000000 0x02000000 + 1 0x0 0xf8000000 0x00008000 + 3 0x0 0xe0600000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0 0x0 0x2000000>; + bank-width = <2>; + device-width = <1>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + fs@100000 { + reg = <0x100000 0x800000>; + }; + + kernel@1d00000 { + reg = <0x1d00000 0x200000>; + }; + + dtb@1f00000 { + reg = <0x1f00000 0x100000>; + }; + }; + + bcsr@1,0 { + reg = <1 0x0 0x8000>; + compatible = "fsl,mpc837xmds-bcsr"; + }; + + nand@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8377-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <3 0x0 0x8000>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + kernel@100000 { + reg = <0x100000 0x300000>; + }; + + fs@400000 { + reg = <0x400000 0x1c00000>; + }; + }; + }; + soc@e0000000 { #address-cells = <1>; #size-cells = <1>; @@ -91,7 +157,6 @@ mode = "cpu"; }; - /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ usb@23000 { compatible = "fsl-usb2-dr"; reg = <0x23000 0x1000>; @@ -99,7 +164,8 @@ #size-cells = <0>; interrupt-parent = <&ipic>; interrupts = <38 0x8>; - phy_type = "utmi_wide"; + dr_mode = "host"; + phy_type = "ulpi"; }; mdio@24520 { @@ -189,14 +255,14 @@ }; sata@18000 { - compatible = "fsl,mpc8379-sata"; + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; reg = <0x18000 0x1000>; interrupts = <44 0x8>; interrupt-parent = <&ipic>; }; sata@19000 { - compatible = "fsl,mpc8379-sata"; + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; reg = <0x19000 0x1000>; interrupts = <45 0x8>; interrupt-parent = <&ipic>; diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts index 440aa4dfab0c..5bc09ad016f5 100644 --- a/arch/powerpc/boot/dts/mpc8377_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts @@ -143,7 +143,6 @@ mode = "cpu"; }; - /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ usb@23000 { compatible = "fsl-usb2-dr"; reg = <0x23000 0x1000>; @@ -151,7 +150,7 @@ #size-cells = <0>; interrupt-parent = <&ipic>; interrupts = <38 0x8>; - phy_type = "utmi"; + phy_type = "ulpi"; }; mdio@24520 { diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts index 533e9b06cc8f..1d6ea080ad73 100644 --- a/arch/powerpc/boot/dts/mpc8378_mds.dts +++ b/arch/powerpc/boot/dts/mpc8378_mds.dts @@ -47,6 +47,72 @@ reg = <0x00000000 0x20000000>; // 512MB at 0 }; + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + // booting from NOR flash + ranges = <0 0x0 0xfe000000 0x02000000 + 1 0x0 0xf8000000 0x00008000 + 3 0x0 0xe0600000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0 0x0 0x2000000>; + bank-width = <2>; + device-width = <1>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + fs@100000 { + reg = <0x100000 0x800000>; + }; + + kernel@1d00000 { + reg = <0x1d00000 0x200000>; + }; + + dtb@1f00000 { + reg = <0x1f00000 0x100000>; + }; + }; + + bcsr@1,0 { + reg = <1 0x0 0x8000>; + compatible = "fsl,mpc837xmds-bcsr"; + }; + + nand@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8378-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <3 0x0 0x8000>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + kernel@100000 { + reg = <0x100000 0x300000>; + }; + + fs@400000 { + reg = <0x400000 0x1c00000>; + }; + }; + }; + soc@e0000000 { #address-cells = <1>; #size-cells = <1>; @@ -91,7 +157,6 @@ mode = "cpu"; }; - /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ usb@23000 { compatible = "fsl-usb2-dr"; reg = <0x23000 0x1000>; @@ -99,7 +164,8 @@ #size-cells = <0>; interrupt-parent = <&ipic>; interrupts = <38 0x8>; - phy_type = "utmi_wide"; + dr_mode = "host"; + phy_type = "ulpi"; }; mdio@24520 { diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts index 92711534b179..711f9a30f9ab 100644 --- a/arch/powerpc/boot/dts/mpc8378_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts @@ -143,7 +143,6 @@ mode = "cpu"; }; - /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ usb@23000 { compatible = "fsl-usb2-dr"; reg = <0x23000 0x1000>; @@ -151,7 +150,7 @@ #size-cells = <0>; interrupt-parent = <&ipic>; interrupts = <38 0x8>; - phy_type = "utmi"; + phy_type = "ulpi"; }; mdio@24520 { diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts index c270685bbde4..6f78a9fd9826 100644 --- a/arch/powerpc/boot/dts/mpc8379_mds.dts +++ b/arch/powerpc/boot/dts/mpc8379_mds.dts @@ -47,6 +47,72 @@ reg = <0x00000000 0x20000000>; // 512MB at 0 }; + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + // booting from NOR flash + ranges = <0 0x0 0xfe000000 0x02000000 + 1 0x0 0xf8000000 0x00008000 + 3 0x0 0xe0600000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0 0x0 0x2000000>; + bank-width = <2>; + device-width = <1>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + fs@100000 { + reg = <0x100000 0x800000>; + }; + + kernel@1d00000 { + reg = <0x1d00000 0x200000>; + }; + + dtb@1f00000 { + reg = <0x1f00000 0x100000>; + }; + }; + + bcsr@1,0 { + reg = <1 0x0 0x8000>; + compatible = "fsl,mpc837xmds-bcsr"; + }; + + nand@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8379-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <3 0x0 0x8000>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + kernel@100000 { + reg = <0x100000 0x300000>; + }; + + fs@400000 { + reg = <0x400000 0x1c00000>; + }; + }; + }; + soc@e0000000 { #address-cells = <1>; #size-cells = <1>; @@ -91,7 +157,6 @@ mode = "cpu"; }; - /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ usb@23000 { compatible = "fsl-usb2-dr"; reg = <0x23000 0x1000>; @@ -99,7 +164,8 @@ #size-cells = <0>; interrupt-parent = <&ipic>; interrupts = <38 0x8>; - phy_type = "utmi_wide"; + dr_mode = "host"; + phy_type = "ulpi"; }; mdio@24520 { @@ -189,28 +255,28 @@ }; sata@18000 { - compatible = "fsl,mpc8379-sata"; + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; reg = <0x18000 0x1000>; interrupts = <44 0x8>; interrupt-parent = <&ipic>; }; sata@19000 { - compatible = "fsl,mpc8379-sata"; + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; reg = <0x19000 0x1000>; interrupts = <45 0x8>; interrupt-parent = <&ipic>; }; sata@1a000 { - compatible = "fsl,mpc8379-sata"; + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; reg = <0x1a000 0x1000>; interrupts = <46 0x8>; interrupt-parent = <&ipic>; }; sata@1b000 { - compatible = "fsl,mpc8379-sata"; + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; reg = <0x1b000 0x1000>; interrupts = <47 0x8>; interrupt-parent = <&ipic>; diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts index 0dda2fc558f8..c11ceb7d3299 100644 --- a/arch/powerpc/boot/dts/mpc8379_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts @@ -143,7 +143,6 @@ mode = "cpu"; }; - /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ usb@23000 { compatible = "fsl-usb2-dr"; reg = <0x23000 0x1000>; @@ -151,7 +150,7 @@ #size-cells = <0>; interrupt-parent = <&ipic>; interrupts = <38 0x8>; - phy_type = "utmi"; + phy_type = "ulpi"; }; mdio@24520 { diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts index 975248491b7b..18033ed0b535 100644 --- a/arch/powerpc/boot/dts/mpc8540ads.dts +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -1,7 +1,7 @@ /* * MPC8540 ADS Device Tree Source * - * Copyright 2006 Freescale Semiconductor Inc. + * Copyright 2006, 2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,6 +9,7 @@ * option) any later version. */ +/dts-v1/; / { model = "MPC8540ADS"; @@ -31,11 +32,11 @@ PowerPC,8540@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K timebase-frequency = <0>; // 33 MHz, from uboot bus-frequency = <0>; // 166 MHz clock-frequency = <0>; // 825 MHz, from uboot @@ -44,31 +45,31 @@ memory { device_type = "memory"; - reg = <00000000 08000000>; // 128M at 0x0 + reg = <0x0 0x8000000>; // 128M at 0x0 }; soc8540@e0000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = <e0000000 00100000>; // CCSRBAR 1M + ranges = <0x0 0xe0000000 0x100000>; + reg = <0xe0000000 0x100000>; // CCSRBAR 1M bus-frequency = <0>; memory-controller@2000 { compatible = "fsl,8540-memory-controller"; - reg = <2000 1000>; + reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; - interrupts = <12 2>; + interrupts = <18 2>; }; l2-cache-controller@20000 { compatible = "fsl,8540-l2-cache-controller"; - reg = <20000 1000>; - cache-line-size = <20>; // 32 bytes - cache-size = <40000>; // L2, 256K + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2, 256K interrupt-parent = <&mpic>; - interrupts = <10 2>; + interrupts = <16 2>; }; i2c@3000 { @@ -76,8 +77,8 @@ #size-cells = <0>; cell-index = <0>; compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = <2b 2>; + reg = <0x3000 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -86,24 +87,24 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-mdio"; - reg = <24520 20>; + reg = <0x24520 0x20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <0>; + reg = <0x0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <1>; + reg = <0x1>; device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; interrupts = <7 1>; - reg = <3>; + reg = <0x3>; device_type = "ethernet-phy"; }; }; @@ -113,9 +114,9 @@ device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <24000 1000>; + reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1d 2 1e 2 22 2>; + interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; }; @@ -125,9 +126,9 @@ device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <25000 1000>; + reg = <0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <23 2 24 2 28 2>; + interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; }; @@ -137,9 +138,9 @@ device_type = "network"; model = "FEC"; compatible = "gianfar"; - reg = <26000 1000>; + reg = <0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2>; + interrupts = <41 2>; interrupt-parent = <&mpic>; phy-handle = <&phy3>; }; @@ -148,9 +149,9 @@ cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; // reg base, size + reg = <0x4500 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; @@ -158,9 +159,9 @@ cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <4600 100>; // reg base, size + reg = <0x4600 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; mpic: pic@40000 { @@ -168,7 +169,7 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <40000 40000>; + reg = <0x40000 0x40000>; compatible = "chrp,open-pic"; device_type = "open-pic"; big-endian; @@ -177,90 +178,90 @@ pci0: pci@e0008000 { cell-index = <0>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x02 */ - 1000 0 0 1 &mpic 1 1 - 1000 0 0 2 &mpic 2 1 - 1000 0 0 3 &mpic 3 1 - 1000 0 0 4 &mpic 4 1 + 0x1000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x1000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x1000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x1000 0x0 0x0 0x4 &mpic 0x4 0x1 /* IDSEL 0x03 */ - 1800 0 0 1 &mpic 4 1 - 1800 0 0 2 &mpic 1 1 - 1800 0 0 3 &mpic 2 1 - 1800 0 0 4 &mpic 3 1 + 0x1800 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x1800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x1800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x1800 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x04 */ - 2000 0 0 1 &mpic 3 1 - 2000 0 0 2 &mpic 4 1 - 2000 0 0 3 &mpic 1 1 - 2000 0 0 4 &mpic 2 1 + 0x2000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x2000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x2000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x2000 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 0x05 */ - 2800 0 0 1 &mpic 2 1 - 2800 0 0 2 &mpic 3 1 - 2800 0 0 3 &mpic 4 1 - 2800 0 0 4 &mpic 1 1 + 0x2800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x2800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x2800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x2800 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x0c */ - 6000 0 0 1 &mpic 1 1 - 6000 0 0 2 &mpic 2 1 - 6000 0 0 3 &mpic 3 1 - 6000 0 0 4 &mpic 4 1 + 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x6000 0x0 0x0 0x4 &mpic 0x4 0x1 /* IDSEL 0x0d */ - 6800 0 0 1 &mpic 4 1 - 6800 0 0 2 &mpic 1 1 - 6800 0 0 3 &mpic 2 1 - 6800 0 0 4 &mpic 3 1 + 0x6800 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x6800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x6800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x6800 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x0e */ - 7000 0 0 1 &mpic 3 1 - 7000 0 0 2 &mpic 4 1 - 7000 0 0 3 &mpic 1 1 - 7000 0 0 4 &mpic 2 1 + 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x7000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x7000 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 0x0f */ - 7800 0 0 1 &mpic 2 1 - 7800 0 0 2 &mpic 3 1 - 7800 0 0 3 &mpic 4 1 - 7800 0 0 4 &mpic 1 1 + 0x7800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x7800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x7800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x7800 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x12 */ - 9000 0 0 1 &mpic 1 1 - 9000 0 0 2 &mpic 2 1 - 9000 0 0 3 &mpic 3 1 - 9000 0 0 4 &mpic 4 1 + 0x9000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 /* IDSEL 0x13 */ - 9800 0 0 1 &mpic 4 1 - 9800 0 0 2 &mpic 1 1 - 9800 0 0 3 &mpic 2 1 - 9800 0 0 4 &mpic 3 1 + 0x9800 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x9800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x9800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x9800 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x14 */ - a000 0 0 1 &mpic 3 1 - a000 0 0 2 &mpic 4 1 - a000 0 0 3 &mpic 1 1 - a000 0 0 4 &mpic 2 1 + 0xa000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0xa000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0xa000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0xa000 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 0x15 */ - a800 0 0 1 &mpic 2 1 - a800 0 0 2 &mpic 3 1 - a800 0 0 3 &mpic 4 1 - a800 0 0 4 &mpic 1 1>; + 0xa800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>; interrupt-parent = <&mpic>; - interrupts = <18 2>; + interrupts = <24 2>; bus-range = <0 0>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e2000000 0 00100000>; - clock-frequency = <3f940aa>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0008000 1000>; + reg = <0xe0008000 0x1000>; compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts index fa8d9aaad157..663c7c50ca45 100644 --- a/arch/powerpc/boot/dts/mpc8541cds.dts +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -1,7 +1,7 @@ /* * MPC8541 CDS Device Tree Source * - * Copyright 2006 Freescale Semiconductor Inc. + * Copyright 2006, 2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,6 +9,7 @@ * option) any later version. */ +/dts-v1/; / { model = "MPC8541CDS"; @@ -31,11 +32,11 @@ PowerPC,8541@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K timebase-frequency = <0>; // 33 MHz, from uboot bus-frequency = <0>; // 166 MHz clock-frequency = <0>; // 825 MHz, from uboot @@ -44,31 +45,31 @@ memory { device_type = "memory"; - reg = <00000000 08000000>; // 128M at 0x0 + reg = <0x0 0x8000000>; // 128M at 0x0 }; soc8541@e0000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = <e0000000 00001000>; // CCSRBAR 1M + ranges = <0x0 0xe0000000 0x100000>; + reg = <0xe0000000 0x1000>; // CCSRBAR 1M bus-frequency = <0>; memory-controller@2000 { compatible = "fsl,8541-memory-controller"; - reg = <2000 1000>; + reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; - interrupts = <12 2>; + interrupts = <18 2>; }; l2-cache-controller@20000 { compatible = "fsl,8541-l2-cache-controller"; - reg = <20000 1000>; - cache-line-size = <20>; // 32 bytes - cache-size = <40000>; // L2, 256K + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2, 256K interrupt-parent = <&mpic>; - interrupts = <10 2>; + interrupts = <16 2>; }; i2c@3000 { @@ -76,8 +77,8 @@ #size-cells = <0>; cell-index = <0>; compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = <2b 2>; + reg = <0x3000 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -86,18 +87,18 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-mdio"; - reg = <24520 20>; + reg = <0x24520 0x20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <0>; + reg = <0x0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <1>; + reg = <0x1>; device_type = "ethernet-phy"; }; }; @@ -107,9 +108,9 @@ device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <24000 1000>; + reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1d 2 1e 2 22 2>; + interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; }; @@ -119,9 +120,9 @@ device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <25000 1000>; + reg = <0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <23 2 24 2 28 2>; + interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; }; @@ -130,9 +131,9 @@ cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; // reg base, size + reg = <0x4500 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; @@ -140,9 +141,9 @@ cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <4600 100>; // reg base, size + reg = <0x4600 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; @@ -151,7 +152,7 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <40000 40000>; + reg = <0x40000 0x40000>; compatible = "chrp,open-pic"; device_type = "open-pic"; big-endian; @@ -161,17 +162,17 @@ #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc8541-cpm", "fsl,cpm2"; - reg = <919c0 30>; + reg = <0x919c0 0x30>; ranges; muram@80000 { #address-cells = <1>; #size-cells = <1>; - ranges = <0 80000 10000>; + ranges = <0x0 0x80000 0x10000>; data@0 { compatible = "fsl,cpm-muram-data"; - reg = <0 2000 9000 1000>; + reg = <0x0 0x2000 0x9000 0x1000>; }; }; @@ -179,16 +180,16 @@ compatible = "fsl,mpc8541-brg", "fsl,cpm2-brg", "fsl,cpm-brg"; - reg = <919f0 10 915f0 10>; + reg = <0x919f0 0x10 0x915f0 0x10>; }; cpmpic: pic@90c00 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - interrupts = <2e 2>; + interrupts = <46 2>; interrupt-parent = <&mpic>; - reg = <90c00 80>; + reg = <0x90c00 0x80>; compatible = "fsl,mpc8541-cpm-pic", "fsl,cpm2-pic"; }; }; @@ -196,68 +197,68 @@ pci0: pci@e0008000 { cell-index = <0>; - interrupt-map-mask = <1f800 0 0 7>; + interrupt-map-mask = <0x1f800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x10 */ - 08000 0 0 1 &mpic 0 1 - 08000 0 0 2 &mpic 1 1 - 08000 0 0 3 &mpic 2 1 - 08000 0 0 4 &mpic 3 1 + 0x8000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x8000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x8000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x8000 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x11 */ - 08800 0 0 1 &mpic 0 1 - 08800 0 0 2 &mpic 1 1 - 08800 0 0 3 &mpic 2 1 - 08800 0 0 4 &mpic 3 1 + 0x8800 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x12 (Slot 1) */ - 09000 0 0 1 &mpic 0 1 - 09000 0 0 2 &mpic 1 1 - 09000 0 0 3 &mpic 2 1 - 09000 0 0 4 &mpic 3 1 + 0x9000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x13 (Slot 2) */ - 09800 0 0 1 &mpic 1 1 - 09800 0 0 2 &mpic 2 1 - 09800 0 0 3 &mpic 3 1 - 09800 0 0 4 &mpic 0 1 + 0x9800 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x9800 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x9800 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x9800 0x0 0x0 0x4 &mpic 0x0 0x1 /* IDSEL 0x14 (Slot 3) */ - 0a000 0 0 1 &mpic 2 1 - 0a000 0 0 2 &mpic 3 1 - 0a000 0 0 3 &mpic 0 1 - 0a000 0 0 4 &mpic 1 1 + 0xa000 0x0 0x0 0x1 &mpic 0x2 0x1 + 0xa000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0xa000 0x0 0x0 0x3 &mpic 0x0 0x1 + 0xa000 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x15 (Slot 4) */ - 0a800 0 0 1 &mpic 3 1 - 0a800 0 0 2 &mpic 0 1 - 0a800 0 0 3 &mpic 1 1 - 0a800 0 0 4 &mpic 2 1 + 0xa800 0x0 0x0 0x1 &mpic 0x3 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0x0 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0x1 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0x2 0x1 /* Bus 1 (Tundra Bridge) */ /* IDSEL 0x12 (ISA bridge) */ - 19000 0 0 1 &mpic 0 1 - 19000 0 0 2 &mpic 1 1 - 19000 0 0 3 &mpic 2 1 - 19000 0 0 4 &mpic 3 1>; + 0x19000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x19000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x19000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>; interrupt-parent = <&mpic>; - interrupts = <18 2>; + interrupts = <24 2>; bus-range = <0 0>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e2000000 0 00100000>; - clock-frequency = <3f940aa>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0008000 1000>; + reg = <0xe0008000 0x1000>; compatible = "fsl,mpc8540-pci"; device_type = "pci"; i8259@19000 { interrupt-controller; device_type = "interrupt-controller"; - reg = <19000 0 0 0 1>; + reg = <0x19000 0x0 0x0 0x0 0x1>; #address-cells = <0>; #interrupt-cells = <2>; compatible = "chrp,iic"; @@ -268,24 +269,24 @@ pci1: pci@e0009000 { cell-index = <1>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x15 */ - a800 0 0 1 &mpic b 1 - a800 0 0 2 &mpic b 1 - a800 0 0 3 &mpic b 1 - a800 0 0 4 &mpic b 1>; + 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>; interrupt-parent = <&mpic>; - interrupts = <19 2>; + interrupts = <25 2>; bus-range = <0 0>; - ranges = <02000000 0 a0000000 a0000000 0 20000000 - 01000000 0 00000000 e3000000 0 00100000>; - clock-frequency = <3f940aa>; + ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0009000 1000>; + reg = <0xe0009000 0x1000>; compatible = "fsl,mpc8540-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts index 688af9d06382..6a0d8db96d97 100644 --- a/arch/powerpc/boot/dts/mpc8544ds.dts +++ b/arch/powerpc/boot/dts/mpc8544ds.dts @@ -1,7 +1,7 @@ /* * MPC8544 DS Device Tree Source * - * Copyright 2007 Freescale Semiconductor Inc. + * Copyright 2007, 2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,6 +9,7 @@ * option) any later version. */ +/dts-v1/; / { model = "MPC8544DS"; compatible = "MPC8544DS", "MPC85xxDS"; @@ -27,17 +28,16 @@ }; cpus { - #cpus = <1>; #address-cells = <1>; #size-cells = <0>; PowerPC,8544@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; @@ -46,7 +46,7 @@ memory { device_type = "memory"; - reg = <00000000 00000000>; // Filled by U-Boot + reg = <0x0 0x0>; // Filled by U-Boot }; soc8544@e0000000 { @@ -54,24 +54,24 @@ #size-cells = <1>; device_type = "soc"; - ranges = <00000000 e0000000 00100000>; - reg = <e0000000 00001000>; // CCSRBAR 1M + ranges = <0x0 0xe0000000 0x100000>; + reg = <0xe0000000 0x1000>; // CCSRBAR 1M bus-frequency = <0>; // Filled out by uboot. memory-controller@2000 { compatible = "fsl,8544-memory-controller"; - reg = <2000 1000>; + reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; - interrupts = <12 2>; + interrupts = <18 2>; }; l2-cache-controller@20000 { compatible = "fsl,8544-l2-cache-controller"; - reg = <20000 1000>; - cache-line-size = <20>; // 32 bytes - cache-size = <40000>; // L2, 256K + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2, 256K interrupt-parent = <&mpic>; - interrupts = <10 2>; + interrupts = <16 2>; }; i2c@3000 { @@ -79,8 +79,8 @@ #size-cells = <0>; cell-index = <0>; compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = <2b 2>; + reg = <0x3000 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -90,8 +90,8 @@ #size-cells = <0>; cell-index = <1>; compatible = "fsl-i2c"; - reg = <3100 100>; - interrupts = <2b 2>; + reg = <0x3100 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -100,30 +100,71 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-mdio"; - reg = <24520 20>; + reg = <0x24520 0x20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; - interrupts = <a 1>; - reg = <0>; + interrupts = <10 1>; + reg = <0x0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; - interrupts = <a 1>; - reg = <1>; + interrupts = <10 1>; + reg = <0x1>; device_type = "ethernet-phy"; }; }; + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8544-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8544-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8544-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8544-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8544-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + enet0: ethernet@24000 { cell-index = <0>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <24000 1000>; + reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1d 2 1e 2 22 2>; + interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; @@ -134,9 +175,9 @@ device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <26000 1000>; + reg = <0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1f 2 20 2 21 2>; + interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; @@ -146,9 +187,9 @@ cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; + reg = <0x4500 0x100>; clock-frequency = <0>; - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; @@ -156,15 +197,15 @@ cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <4600 100>; + reg = <0x4600 0x100>; clock-frequency = <0>; - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; global-utilities@e0000 { //global utilities block compatible = "fsl,mpc8548-guts"; - reg = <e0000 1000>; + reg = <0xe0000 0x1000>; fsl,has-rstcr; }; @@ -173,7 +214,7 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <40000 40000>; + reg = <0x40000 0x40000>; compatible = "chrp,open-pic"; device_type = "open-pic"; big-endian; @@ -184,32 +225,32 @@ cell-index = <0>; compatible = "fsl,mpc8540-pci"; device_type = "pci"; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x11 J17 Slot 1 */ - 8800 0 0 1 &mpic 2 1 - 8800 0 0 2 &mpic 3 1 - 8800 0 0 3 &mpic 4 1 - 8800 0 0 4 &mpic 1 1 + 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x12 J16 Slot 2 */ - 9000 0 0 1 &mpic 3 1 - 9000 0 0 2 &mpic 4 1 - 9000 0 0 3 &mpic 2 1 - 9000 0 0 4 &mpic 1 1>; + 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x1 0x1>; interrupt-parent = <&mpic>; - interrupts = <18 2>; - bus-range = <0 ff>; - ranges = <02000000 0 c0000000 c0000000 0 20000000 - 01000000 0 00000000 e1000000 0 00010000>; - clock-frequency = <3f940aa>; + interrupts = <24 2>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe1000000 0x0 0x10000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0008000 1000>; + reg = <0xe0008000 0x1000>; }; pci1: pcie@e0009000 { @@ -219,33 +260,33 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0009000 1000>; - bus-range = <0 ff>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e1010000 0 00010000>; - clock-frequency = <1fca055>; + reg = <0xe0009000 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe1010000 0x0 0x10000>; + clock-frequency = <33333333>; interrupt-parent = <&mpic>; - interrupts = <1a 2>; - interrupt-map-mask = <f800 0 0 7>; + interrupts = <26 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 4 1 - 0000 0 0 2 &mpic 5 1 - 0000 0 0 3 &mpic 6 1 - 0000 0 0 4 &mpic 7 1 + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 >; pcie@0 { - reg = <0 0 0 0 0>; + reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - ranges = <02000000 0 80000000 - 02000000 0 80000000 - 0 20000000 + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00010000>; + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; }; }; @@ -256,33 +297,33 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e000a000 1000>; - bus-range = <0 ff>; - ranges = <02000000 0 a0000000 a0000000 0 10000000 - 01000000 0 00000000 e1020000 0 00010000>; - clock-frequency = <1fca055>; + reg = <0xe000a000 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x1000000 0x0 0x0 0xe1020000 0x0 0x10000>; + clock-frequency = <33333333>; interrupt-parent = <&mpic>; - interrupts = <19 2>; - interrupt-map-mask = <f800 0 0 7>; + interrupts = <25 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 0 1 - 0000 0 0 2 &mpic 1 1 - 0000 0 0 3 &mpic 2 1 - 0000 0 0 4 &mpic 3 1 + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 >; pcie@0 { - reg = <0 0 0 0 0>; + reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - ranges = <02000000 0 a0000000 - 02000000 0 a0000000 - 0 10000000 + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x10000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00010000>; + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; }; }; @@ -293,72 +334,72 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e000b000 1000>; - bus-range = <0 ff>; - ranges = <02000000 0 b0000000 b0000000 0 00100000 - 01000000 0 00000000 b0100000 0 00100000>; - clock-frequency = <1fca055>; + reg = <0xe000b000 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xb0000000 0xb0000000 0x0 0x100000 + 0x1000000 0x0 0x0 0xb0100000 0x0 0x100000>; + clock-frequency = <33333333>; interrupt-parent = <&mpic>; - interrupts = <1b 2>; - interrupt-map-mask = <ff00 0 0 1>; + interrupts = <27 2>; + interrupt-map-mask = <0xff00 0x0 0x0 0x1>; interrupt-map = < // IDSEL 0x1c USB - e000 0 0 1 &i8259 c 2 - e100 0 0 2 &i8259 9 2 - e200 0 0 3 &i8259 a 2 - e300 0 0 4 &i8259 b 2 + 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2 + 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2 + 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2 + 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2 // IDSEL 0x1d Audio - e800 0 0 1 &i8259 6 2 + 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 // IDSEL 0x1e Legacy - f000 0 0 1 &i8259 7 2 - f100 0 0 1 &i8259 7 2 + 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 + 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 // IDSEL 0x1f IDE/SATA - f800 0 0 1 &i8259 e 2 - f900 0 0 1 &i8259 5 2 + 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 + 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 >; pcie@0 { - reg = <0 0 0 0 0>; + reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - ranges = <02000000 0 b0000000 - 02000000 0 b0000000 - 0 00100000 + ranges = <0x2000000 0x0 0xb0000000 + 0x2000000 0x0 0xb0000000 + 0x0 0x100000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00100000>; + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; uli1575@0 { - reg = <0 0 0 0 0>; + reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; - ranges = <02000000 0 b0000000 - 02000000 0 b0000000 - 0 00100000 + ranges = <0x2000000 0x0 0xb0000000 + 0x2000000 0x0 0xb0000000 + 0x0 0x100000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00100000>; + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; isa@1e { device_type = "isa"; #interrupt-cells = <2>; #size-cells = <1>; #address-cells = <2>; - reg = <f000 0 0 0 0>; - ranges = <1 0 - 01000000 0 0 - 00001000>; + reg = <0xf000 0x0 0x0 0x0 0x0>; + ranges = <0x1 0x0 + 0x1000000 0x0 0x0 + 0x1000>; interrupt-parent = <&i8259>; i8259: interrupt-controller@20 { - reg = <1 20 2 - 1 a0 2 - 1 4d0 2>; + reg = <0x1 0x20 0x2 + 0x1 0xa0 0x2 + 0x1 0x4d0 0x2>; interrupt-controller; device_type = "interrupt-controller"; #address-cells = <0>; @@ -371,28 +412,28 @@ i8042@60 { #size-cells = <0>; #address-cells = <1>; - reg = <1 60 1 1 64 1>; - interrupts = <1 3 c 3>; + reg = <0x1 0x60 0x1 0x1 0x64 0x1>; + interrupts = <1 3 12 3>; interrupt-parent = <&i8259>; keyboard@0 { - reg = <0>; + reg = <0x0>; compatible = "pnpPNP,303"; }; mouse@1 { - reg = <1>; + reg = <0x1>; compatible = "pnpPNP,f03"; }; }; rtc@70 { compatible = "pnpPNP,b00"; - reg = <1 70 2>; + reg = <0x1 0x70 0x2>; }; gpio@400 { - reg = <1 400 80>; + reg = <0x1 0x400 0x80>; }; }; }; diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index 1f470c6a1c63..fa298a8c81cc 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -1,7 +1,7 @@ /* * MPC8548 CDS Device Tree Source * - * Copyright 2006 Freescale Semiconductor Inc. + * Copyright 2006, 2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,6 +9,7 @@ * option) any later version. */ +/dts-v1/; / { model = "MPC8548CDS"; @@ -36,11 +37,11 @@ PowerPC,8548@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K timebase-frequency = <0>; // 33 MHz, from uboot bus-frequency = <0>; // 166 MHz clock-frequency = <0>; // 825 MHz, from uboot @@ -49,31 +50,31 @@ memory { device_type = "memory"; - reg = <00000000 08000000>; // 128M at 0x0 + reg = <0x0 0x8000000>; // 128M at 0x0 }; soc8548@e0000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <00000000 e0000000 00100000>; - reg = <e0000000 00001000>; // CCSRBAR + ranges = <0x0 0xe0000000 0x100000>; + reg = <0xe0000000 0x1000>; // CCSRBAR bus-frequency = <0>; memory-controller@2000 { compatible = "fsl,8548-memory-controller"; - reg = <2000 1000>; + reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; - interrupts = <12 2>; + interrupts = <18 2>; }; l2-cache-controller@20000 { compatible = "fsl,8548-l2-cache-controller"; - reg = <20000 1000>; - cache-line-size = <20>; // 32 bytes - cache-size = <80000>; // L2, 512K + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K interrupt-parent = <&mpic>; - interrupts = <10 2>; + interrupts = <16 2>; }; i2c@3000 { @@ -81,8 +82,8 @@ #size-cells = <0>; cell-index = <0>; compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = <2b 2>; + reg = <0x3000 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -92,8 +93,8 @@ #size-cells = <0>; cell-index = <1>; compatible = "fsl-i2c"; - reg = <3100 100>; - interrupts = <2b 2>; + reg = <0x3100 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -102,30 +103,30 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-mdio"; - reg = <24520 20>; + reg = <0x24520 0x20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <0>; + reg = <0x0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <1>; + reg = <0x1>; device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <2>; + reg = <0x2>; device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <3>; + reg = <0x3>; device_type = "ethernet-phy"; }; }; @@ -135,9 +136,9 @@ device_type = "network"; model = "eTSEC"; compatible = "gianfar"; - reg = <24000 1000>; + reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1d 2 1e 2 22 2>; + interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; }; @@ -147,9 +148,9 @@ device_type = "network"; model = "eTSEC"; compatible = "gianfar"; - reg = <25000 1000>; + reg = <0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <23 2 24 2 28 2>; + interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; }; @@ -160,9 +161,9 @@ device_type = "network"; model = "eTSEC"; compatible = "gianfar"; - reg = <26000 1000>; + reg = <0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1f 2 20 2 21 2>; + interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; phy-handle = <&phy2>; }; @@ -172,9 +173,9 @@ device_type = "network"; model = "eTSEC"; compatible = "gianfar"; - reg = <27000 1000>; + reg = <0x27000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <25 2 26 2 27 2>; + interrupts = <37 2 38 2 39 2>; interrupt-parent = <&mpic>; phy-handle = <&phy3>; }; @@ -184,9 +185,9 @@ cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; // reg base, size + reg = <0x4500 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; @@ -194,15 +195,15 @@ cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <4600 100>; // reg base, size + reg = <0x4600 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; global-utilities@e0000 { //global utilities reg compatible = "fsl,mpc8548-guts"; - reg = <e0000 1000>; + reg = <0xe0000 0x1000>; fsl,has-rstcr; }; @@ -211,7 +212,7 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <40000 40000>; + reg = <0x40000 0x40000>; compatible = "chrp,open-pic"; device_type = "open-pic"; big-endian; @@ -220,139 +221,139 @@ pci0: pci@e0008000 { cell-index = <0>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x4 (PCIX Slot 2) */ - 02000 0 0 1 &mpic 0 1 - 02000 0 0 2 &mpic 1 1 - 02000 0 0 3 &mpic 2 1 - 02000 0 0 4 &mpic 3 1 + 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x5 (PCIX Slot 3) */ - 02800 0 0 1 &mpic 1 1 - 02800 0 0 2 &mpic 2 1 - 02800 0 0 3 &mpic 3 1 - 02800 0 0 4 &mpic 0 1 + 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 /* IDSEL 0x6 (PCIX Slot 4) */ - 03000 0 0 1 &mpic 2 1 - 03000 0 0 2 &mpic 3 1 - 03000 0 0 3 &mpic 0 1 - 03000 0 0 4 &mpic 1 1 + 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 + 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x8 (PCIX Slot 5) */ - 04000 0 0 1 &mpic 0 1 - 04000 0 0 2 &mpic 1 1 - 04000 0 0 3 &mpic 2 1 - 04000 0 0 4 &mpic 3 1 + 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0xC (Tsi310 bridge) */ - 06000 0 0 1 &mpic 0 1 - 06000 0 0 2 &mpic 1 1 - 06000 0 0 3 &mpic 2 1 - 06000 0 0 4 &mpic 3 1 + 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x14 (Slot 2) */ - 0a000 0 0 1 &mpic 0 1 - 0a000 0 0 2 &mpic 1 1 - 0a000 0 0 3 &mpic 2 1 - 0a000 0 0 4 &mpic 3 1 + 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x15 (Slot 3) */ - 0a800 0 0 1 &mpic 1 1 - 0a800 0 0 2 &mpic 2 1 - 0a800 0 0 3 &mpic 3 1 - 0a800 0 0 4 &mpic 0 1 + 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 /* IDSEL 0x16 (Slot 4) */ - 0b000 0 0 1 &mpic 2 1 - 0b000 0 0 2 &mpic 3 1 - 0b000 0 0 3 &mpic 0 1 - 0b000 0 0 4 &mpic 1 1 + 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 + 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 + 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x18 (Slot 5) */ - 0c000 0 0 1 &mpic 0 1 - 0c000 0 0 2 &mpic 1 1 - 0c000 0 0 3 &mpic 2 1 - 0c000 0 0 4 &mpic 3 1 + 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x1C (Tsi310 bridge PCI primary) */ - 0E000 0 0 1 &mpic 0 1 - 0E000 0 0 2 &mpic 1 1 - 0E000 0 0 3 &mpic 2 1 - 0E000 0 0 4 &mpic 3 1>; + 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1>; interrupt-parent = <&mpic>; - interrupts = <18 2>; + interrupts = <24 2>; bus-range = <0 0>; - ranges = <02000000 0 80000000 80000000 0 10000000 - 01000000 0 00000000 e2000000 0 00800000>; - clock-frequency = <3f940aa>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0008000 1000>; + reg = <0xe0008000 0x1000>; compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; device_type = "pci"; pci_bridge@1c { - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x00 (PrPMC Site) */ - 0000 0 0 1 &mpic 0 1 - 0000 0 0 2 &mpic 1 1 - 0000 0 0 3 &mpic 2 1 - 0000 0 0 4 &mpic 3 1 + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x04 (VIA chip) */ - 2000 0 0 1 &mpic 0 1 - 2000 0 0 2 &mpic 1 1 - 2000 0 0 3 &mpic 2 1 - 2000 0 0 4 &mpic 3 1 + 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x05 (8139) */ - 2800 0 0 1 &mpic 1 1 + 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 /* IDSEL 0x06 (Slot 6) */ - 3000 0 0 1 &mpic 2 1 - 3000 0 0 2 &mpic 3 1 - 3000 0 0 3 &mpic 0 1 - 3000 0 0 4 &mpic 1 1 + 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 + 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDESL 0x07 (Slot 7) */ - 3800 0 0 1 &mpic 3 1 - 3800 0 0 2 &mpic 0 1 - 3800 0 0 3 &mpic 1 1 - 3800 0 0 4 &mpic 2 1>; + 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 + 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1>; - reg = <e000 0 0 0 0>; + reg = <0xe000 0x0 0x0 0x0 0x0>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - ranges = <02000000 0 80000000 - 02000000 0 80000000 - 0 20000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00080000>; - clock-frequency = <1fca055>; + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x80000>; + clock-frequency = <33333333>; isa@4 { device_type = "isa"; #interrupt-cells = <2>; #size-cells = <1>; #address-cells = <2>; - reg = <2000 0 0 0 0>; - ranges = <1 0 01000000 0 0 00001000>; + reg = <0x2000 0x0 0x0 0x0 0x0>; + ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>; interrupt-parent = <&i8259>; i8259: interrupt-controller@20 { interrupt-controller; device_type = "interrupt-controller"; - reg = <1 20 2 - 1 a0 2 - 1 4d0 2>; + reg = <0x1 0x20 0x2 + 0x1 0xa0 0x2 + 0x1 0x4d0 0x2>; #address-cells = <0>; #interrupt-cells = <2>; compatible = "chrp,iic"; @@ -362,7 +363,7 @@ rtc@70 { compatible = "pnpPNP,b00"; - reg = <1 70 2>; + reg = <0x1 0x70 0x2>; }; }; }; @@ -370,64 +371,64 @@ pci1: pci@e0009000 { cell-index = <1>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x15 */ - a800 0 0 1 &mpic b 1 - a800 0 0 2 &mpic 1 1 - a800 0 0 3 &mpic 2 1 - a800 0 0 4 &mpic 3 1>; + 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1>; interrupt-parent = <&mpic>; - interrupts = <19 2>; + interrupts = <25 2>; bus-range = <0 0>; - ranges = <02000000 0 90000000 90000000 0 10000000 - 01000000 0 00000000 e2800000 0 00800000>; - clock-frequency = <3f940aa>; + ranges = <0x2000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0009000 1000>; + reg = <0xe0009000 0x1000>; compatible = "fsl,mpc8540-pci"; device_type = "pci"; }; pci2: pcie@e000a000 { cell-index = <2>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0 (PEX) */ - 00000 0 0 1 &mpic 0 1 - 00000 0 0 2 &mpic 1 1 - 00000 0 0 3 &mpic 2 1 - 00000 0 0 4 &mpic 3 1>; + 00000 0x0 0x0 0x1 &mpic 0x0 0x1 + 00000 0x0 0x0 0x2 &mpic 0x1 0x1 + 00000 0x0 0x0 0x3 &mpic 0x2 0x1 + 00000 0x0 0x0 0x4 &mpic 0x3 0x1>; interrupt-parent = <&mpic>; - interrupts = <1a 2>; - bus-range = <0 ff>; - ranges = <02000000 0 a0000000 a0000000 0 20000000 - 01000000 0 00000000 e3000000 0 08000000>; - clock-frequency = <1fca055>; + interrupts = <26 2>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe3000000 0x0 0x8000000>; + clock-frequency = <33333333>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e000a000 1000>; + reg = <0xe000a000 0x1000>; compatible = "fsl,mpc8548-pcie"; device_type = "pci"; pcie@0 { - reg = <0 0 0 0 0>; + reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - ranges = <02000000 0 a0000000 - 02000000 0 a0000000 - 0 20000000 + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 08000000>; + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x8000000>; }; }; }; diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts index 4538f3c38862..b025c566c10d 100644 --- a/arch/powerpc/boot/dts/mpc8555cds.dts +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -1,7 +1,7 @@ /* * MPC8555 CDS Device Tree Source * - * Copyright 2006 Freescale Semiconductor Inc. + * Copyright 2006, 2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,6 +9,7 @@ * option) any later version. */ +/dts-v1/; / { model = "MPC8555CDS"; @@ -31,11 +32,11 @@ PowerPC,8555@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K timebase-frequency = <0>; // 33 MHz, from uboot bus-frequency = <0>; // 166 MHz clock-frequency = <0>; // 825 MHz, from uboot @@ -44,31 +45,31 @@ memory { device_type = "memory"; - reg = <00000000 08000000>; // 128M at 0x0 + reg = <0x0 0x8000000>; // 128M at 0x0 }; soc8555@e0000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = <e0000000 00001000>; // CCSRBAR 1M + ranges = <0x0 0xe0000000 0x100000>; + reg = <0xe0000000 0x1000>; // CCSRBAR 1M bus-frequency = <0>; memory-controller@2000 { compatible = "fsl,8555-memory-controller"; - reg = <2000 1000>; + reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; - interrupts = <12 2>; + interrupts = <18 2>; }; l2-cache-controller@20000 { compatible = "fsl,8555-l2-cache-controller"; - reg = <20000 1000>; - cache-line-size = <20>; // 32 bytes - cache-size = <40000>; // L2, 256K + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2, 256K interrupt-parent = <&mpic>; - interrupts = <10 2>; + interrupts = <16 2>; }; i2c@3000 { @@ -76,8 +77,8 @@ #size-cells = <0>; cell-index = <0>; compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = <2b 2>; + reg = <0x3000 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -86,18 +87,18 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-mdio"; - reg = <24520 20>; + reg = <0x24520 0x20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <0>; + reg = <0x0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <1>; + reg = <0x1>; device_type = "ethernet-phy"; }; }; @@ -107,9 +108,9 @@ device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <24000 1000>; + reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1d 2 1e 2 22 2>; + interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; }; @@ -119,9 +120,9 @@ device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <25000 1000>; + reg = <0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <23 2 24 2 28 2>; + interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; }; @@ -130,9 +131,9 @@ cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; // reg base, size + reg = <0x4500 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; @@ -140,9 +141,9 @@ cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <4600 100>; // reg base, size + reg = <0x4600 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; @@ -151,7 +152,7 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <40000 40000>; + reg = <0x40000 0x40000>; compatible = "chrp,open-pic"; device_type = "open-pic"; big-endian; @@ -161,17 +162,17 @@ #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc8555-cpm", "fsl,cpm2"; - reg = <919c0 30>; + reg = <0x919c0 0x30>; ranges; muram@80000 { #address-cells = <1>; #size-cells = <1>; - ranges = <0 80000 10000>; + ranges = <0x0 0x80000 0x10000>; data@0 { compatible = "fsl,cpm-muram-data"; - reg = <0 2000 9000 1000>; + reg = <0x0 0x2000 0x9000 0x1000>; }; }; @@ -179,16 +180,16 @@ compatible = "fsl,mpc8555-brg", "fsl,cpm2-brg", "fsl,cpm-brg"; - reg = <919f0 10 915f0 10>; + reg = <0x919f0 0x10 0x915f0 0x10>; }; cpmpic: pic@90c00 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - interrupts = <2e 2>; + interrupts = <46 2>; interrupt-parent = <&mpic>; - reg = <90c00 80>; + reg = <0x90c00 0x80>; compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic"; }; }; @@ -196,68 +197,68 @@ pci0: pci@e0008000 { cell-index = <0>; - interrupt-map-mask = <1f800 0 0 7>; + interrupt-map-mask = <0x1f800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x10 */ - 08000 0 0 1 &mpic 0 1 - 08000 0 0 2 &mpic 1 1 - 08000 0 0 3 &mpic 2 1 - 08000 0 0 4 &mpic 3 1 + 0x8000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x8000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x8000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x8000 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x11 */ - 08800 0 0 1 &mpic 0 1 - 08800 0 0 2 &mpic 1 1 - 08800 0 0 3 &mpic 2 1 - 08800 0 0 4 &mpic 3 1 + 0x8800 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x12 (Slot 1) */ - 09000 0 0 1 &mpic 0 1 - 09000 0 0 2 &mpic 1 1 - 09000 0 0 3 &mpic 2 1 - 09000 0 0 4 &mpic 3 1 + 0x9000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x13 (Slot 2) */ - 09800 0 0 1 &mpic 1 1 - 09800 0 0 2 &mpic 2 1 - 09800 0 0 3 &mpic 3 1 - 09800 0 0 4 &mpic 0 1 + 0x9800 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x9800 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x9800 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x9800 0x0 0x0 0x4 &mpic 0x0 0x1 /* IDSEL 0x14 (Slot 3) */ - 0a000 0 0 1 &mpic 2 1 - 0a000 0 0 2 &mpic 3 1 - 0a000 0 0 3 &mpic 0 1 - 0a000 0 0 4 &mpic 1 1 + 0xa000 0x0 0x0 0x1 &mpic 0x2 0x1 + 0xa000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0xa000 0x0 0x0 0x3 &mpic 0x0 0x1 + 0xa000 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x15 (Slot 4) */ - 0a800 0 0 1 &mpic 3 1 - 0a800 0 0 2 &mpic 0 1 - 0a800 0 0 3 &mpic 1 1 - 0a800 0 0 4 &mpic 2 1 + 0xa800 0x0 0x0 0x1 &mpic 0x3 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0x0 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0x1 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0x2 0x1 /* Bus 1 (Tundra Bridge) */ /* IDSEL 0x12 (ISA bridge) */ - 19000 0 0 1 &mpic 0 1 - 19000 0 0 2 &mpic 1 1 - 19000 0 0 3 &mpic 2 1 - 19000 0 0 4 &mpic 3 1>; + 0x19000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x19000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x19000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>; interrupt-parent = <&mpic>; - interrupts = <18 2>; + interrupts = <24 2>; bus-range = <0 0>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e2000000 0 00100000>; - clock-frequency = <3f940aa>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0008000 1000>; + reg = <0xe0008000 0x1000>; compatible = "fsl,mpc8540-pci"; device_type = "pci"; i8259@19000 { interrupt-controller; device_type = "interrupt-controller"; - reg = <19000 0 0 0 1>; + reg = <0x19000 0x0 0x0 0x0 0x1>; #address-cells = <0>; #interrupt-cells = <2>; compatible = "chrp,iic"; @@ -268,24 +269,24 @@ pci1: pci@e0009000 { cell-index = <1>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x15 */ - a800 0 0 1 &mpic b 1 - a800 0 0 2 &mpic b 1 - a800 0 0 3 &mpic b 1 - a800 0 0 4 &mpic b 1>; + 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>; interrupt-parent = <&mpic>; - interrupts = <19 2>; + interrupts = <25 2>; bus-range = <0 0>; - ranges = <02000000 0 a0000000 a0000000 0 20000000 - 01000000 0 00000000 e3000000 0 00100000>; - clock-frequency = <3f940aa>; + ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0009000 1000>; + reg = <0xe0009000 0x1000>; compatible = "fsl,mpc8540-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts index 639ce8a709a6..0cc16ab305d1 100644 --- a/arch/powerpc/boot/dts/mpc8560ads.dts +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -1,7 +1,7 @@ /* * MPC8560 ADS Device Tree Source * - * Copyright 2006 Freescale Semiconductor Inc. + * Copyright 2006, 2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,6 +9,7 @@ * option) any later version. */ +/dts-v1/; / { model = "MPC8560ADS"; @@ -32,74 +33,74 @@ PowerPC,8560@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K - timebase-frequency = <04ead9a0>; - bus-frequency = <13ab6680>; - clock-frequency = <312c8040>; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <82500000>; + bus-frequency = <330000000>; + clock-frequency = <825000000>; }; }; memory { device_type = "memory"; - reg = <00000000 10000000>; + reg = <0x0 0x10000000>; }; soc8560@e0000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = <e0000000 00000200>; - bus-frequency = <13ab6680>; + ranges = <0x0 0xe0000000 0x100000>; + reg = <0xe0000000 0x200>; + bus-frequency = <330000000>; memory-controller@2000 { compatible = "fsl,8540-memory-controller"; - reg = <2000 1000>; + reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; - interrupts = <12 2>; + interrupts = <18 2>; }; l2-cache-controller@20000 { compatible = "fsl,8540-l2-cache-controller"; - reg = <20000 1000>; - cache-line-size = <20>; // 32 bytes - cache-size = <40000>; // L2, 256K + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2, 256K interrupt-parent = <&mpic>; - interrupts = <10 2>; + interrupts = <16 2>; }; mdio@24520 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-mdio"; - reg = <24520 20>; + reg = <0x24520 0x20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <0>; + reg = <0x0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <1>; + reg = <0x1>; device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupt-parent = <&mpic>; interrupts = <7 1>; - reg = <2>; + reg = <0x2>; device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; interrupts = <7 1>; - reg = <3>; + reg = <0x3>; device_type = "ethernet-phy"; }; }; @@ -109,9 +110,9 @@ device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <24000 1000>; + reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1d 2 1e 2 22 2>; + interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; }; @@ -121,9 +122,9 @@ device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <25000 1000>; + reg = <0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <23 2 24 2 28 2>; + interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; }; @@ -132,7 +133,7 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <40000 40000>; + reg = <0x40000 0x40000>; device_type = "open-pic"; }; @@ -140,17 +141,17 @@ #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc8560-cpm", "fsl,cpm2"; - reg = <919c0 30>; + reg = <0x919c0 0x30>; ranges; muram@80000 { #address-cells = <1>; #size-cells = <1>; - ranges = <0 80000 10000>; + ranges = <0x0 0x80000 0x10000>; data@0 { compatible = "fsl,cpm-muram-data"; - reg = <0 4000 9000 2000>; + reg = <0x0 0x4000 0x9000 0x2000>; }; }; @@ -158,17 +159,17 @@ compatible = "fsl,mpc8560-brg", "fsl,cpm2-brg", "fsl,cpm-brg"; - reg = <919f0 10 915f0 10>; - clock-frequency = <d#165000000>; + reg = <0x919f0 0x10 0x915f0 0x10>; + clock-frequency = <165000000>; }; cpmpic: pic@90c00 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - interrupts = <2e 2>; + interrupts = <46 2>; interrupt-parent = <&mpic>; - reg = <90c00 80>; + reg = <0x90c00 0x80>; compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic"; }; @@ -176,11 +177,11 @@ device_type = "serial"; compatible = "fsl,mpc8560-scc-uart", "fsl,cpm2-scc-uart"; - reg = <91a00 20 88000 100>; + reg = <0x91a00 0x20 0x88000 0x100>; fsl,cpm-brg = <1>; - fsl,cpm-command = <00800000>; - current-speed = <1c200>; - interrupts = <28 8>; + fsl,cpm-command = <0x800000>; + current-speed = <115200>; + interrupts = <40 8>; interrupt-parent = <&cpmpic>; }; @@ -188,11 +189,11 @@ device_type = "serial"; compatible = "fsl,mpc8560-scc-uart", "fsl,cpm2-scc-uart"; - reg = <91a20 20 88100 100>; + reg = <0x91a20 0x20 0x88100 0x100>; fsl,cpm-brg = <2>; - fsl,cpm-command = <04a00000>; - current-speed = <1c200>; - interrupts = <29 8>; + fsl,cpm-command = <0x4a00000>; + current-speed = <115200>; + interrupts = <41 8>; interrupt-parent = <&cpmpic>; }; @@ -200,10 +201,10 @@ device_type = "network"; compatible = "fsl,mpc8560-fcc-enet", "fsl,cpm2-fcc-enet"; - reg = <91320 20 88500 100 913b0 1>; + reg = <0x91320 0x20 0x88500 0x100 0x913b0 0x1>; local-mac-address = [ 00 00 00 00 00 00 ]; - fsl,cpm-command = <16200300>; - interrupts = <21 8>; + fsl,cpm-command = <0x16200300>; + interrupts = <33 8>; interrupt-parent = <&cpmpic>; phy-handle = <&phy2>; }; @@ -212,10 +213,10 @@ device_type = "network"; compatible = "fsl,mpc8560-fcc-enet", "fsl,cpm2-fcc-enet"; - reg = <91340 20 88600 100 913d0 1>; + reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>; local-mac-address = [ 00 00 00 00 00 00 ]; - fsl,cpm-command = <1a400300>; - interrupts = <22 8>; + fsl,cpm-command = <0x1a400300>; + interrupts = <34 8>; interrupt-parent = <&cpmpic>; phy-handle = <&phy3>; }; @@ -229,87 +230,87 @@ #address-cells = <3>; compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; device_type = "pci"; - reg = <e0008000 1000>; - clock-frequency = <3f940aa>; - interrupt-map-mask = <f800 0 0 7>; + reg = <0xe0008000 0x1000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x2 */ - 1000 0 0 1 &mpic 1 1 - 1000 0 0 2 &mpic 2 1 - 1000 0 0 3 &mpic 3 1 - 1000 0 0 4 &mpic 4 1 + 0x1000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x1000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x1000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x1000 0x0 0x0 0x4 &mpic 0x4 0x1 /* IDSEL 0x3 */ - 1800 0 0 1 &mpic 4 1 - 1800 0 0 2 &mpic 1 1 - 1800 0 0 3 &mpic 2 1 - 1800 0 0 4 &mpic 3 1 + 0x1800 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x1800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x1800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x1800 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x4 */ - 2000 0 0 1 &mpic 3 1 - 2000 0 0 2 &mpic 4 1 - 2000 0 0 3 &mpic 1 1 - 2000 0 0 4 &mpic 2 1 + 0x2000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x2000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x2000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x2000 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 0x5 */ - 2800 0 0 1 &mpic 2 1 - 2800 0 0 2 &mpic 3 1 - 2800 0 0 3 &mpic 4 1 - 2800 0 0 4 &mpic 1 1 + 0x2800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x2800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x2800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x2800 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 12 */ - 6000 0 0 1 &mpic 1 1 - 6000 0 0 2 &mpic 2 1 - 6000 0 0 3 &mpic 3 1 - 6000 0 0 4 &mpic 4 1 + 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x6000 0x0 0x0 0x4 &mpic 0x4 0x1 /* IDSEL 13 */ - 6800 0 0 1 &mpic 4 1 - 6800 0 0 2 &mpic 1 1 - 6800 0 0 3 &mpic 2 1 - 6800 0 0 4 &mpic 3 1 + 0x6800 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x6800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x6800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x6800 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 14*/ - 7000 0 0 1 &mpic 3 1 - 7000 0 0 2 &mpic 4 1 - 7000 0 0 3 &mpic 1 1 - 7000 0 0 4 &mpic 2 1 + 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x7000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x7000 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 15 */ - 7800 0 0 1 &mpic 2 1 - 7800 0 0 2 &mpic 3 1 - 7800 0 0 3 &mpic 4 1 - 7800 0 0 4 &mpic 1 1 + 0x7800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x7800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x7800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x7800 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 18 */ - 9000 0 0 1 &mpic 1 1 - 9000 0 0 2 &mpic 2 1 - 9000 0 0 3 &mpic 3 1 - 9000 0 0 4 &mpic 4 1 + 0x9000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 /* IDSEL 19 */ - 9800 0 0 1 &mpic 4 1 - 9800 0 0 2 &mpic 1 1 - 9800 0 0 3 &mpic 2 1 - 9800 0 0 4 &mpic 3 1 + 0x9800 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x9800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x9800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x9800 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 20 */ - a000 0 0 1 &mpic 3 1 - a000 0 0 2 &mpic 4 1 - a000 0 0 3 &mpic 1 1 - a000 0 0 4 &mpic 2 1 + 0xa000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0xa000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0xa000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0xa000 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 21 */ - a800 0 0 1 &mpic 2 1 - a800 0 0 2 &mpic 3 1 - a800 0 0 3 &mpic 4 1 - a800 0 0 4 &mpic 1 1>; + 0xa800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>; interrupt-parent = <&mpic>; - interrupts = <18 2>; + interrupts = <24 2>; bus-range = <0 0>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e2000000 0 01000000>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe2000000 0x0 0x1000000>; }; }; diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index 97bc048f2158..a025a8ededc5 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -1,7 +1,7 @@ /* * MPC8568E MDS Device Tree Source * - * Copyright 2007 Freescale Semiconductor Inc. + * Copyright 2007, 2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,10 +9,7 @@ * option) any later version. */ - -/* -/memreserve/ 00000000 1000000; -*/ +/dts-v1/; / { model = "MPC8568EMDS"; @@ -37,11 +34,11 @@ PowerPC,8568@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; @@ -50,36 +47,36 @@ memory { device_type = "memory"; - reg = <00000000 10000000>; + reg = <0x0 0x10000000>; }; bcsr@f8000000 { device_type = "board-control"; - reg = <f8000000 8000>; + reg = <0xf8000000 0x8000>; }; soc8568@e0000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = <e0000000 00001000>; + ranges = <0x0 0xe0000000 0x100000>; + reg = <0xe0000000 0x1000>; bus-frequency = <0>; memory-controller@2000 { compatible = "fsl,8568-memory-controller"; - reg = <2000 1000>; + reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; - interrupts = <12 2>; + interrupts = <18 2>; }; l2-cache-controller@20000 { compatible = "fsl,8568-l2-cache-controller"; - reg = <20000 1000>; - cache-line-size = <20>; // 32 bytes - cache-size = <80000>; // L2, 512K + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K interrupt-parent = <&mpic>; - interrupts = <10 2>; + interrupts = <16 2>; }; i2c@3000 { @@ -87,14 +84,14 @@ #size-cells = <0>; cell-index = <0>; compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = <2b 2>; + reg = <0x3000 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; rtc@68 { compatible = "dallas,ds1374"; - reg = <68>; + reg = <0x68>; }; }; @@ -103,8 +100,8 @@ #size-cells = <0>; cell-index = <1>; compatible = "fsl-i2c"; - reg = <3100 100>; - interrupts = <2b 2>; + reg = <0x3100 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -113,30 +110,30 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-mdio"; - reg = <24520 20>; + reg = <0x24520 0x20>; phy0: ethernet-phy@7 { interrupt-parent = <&mpic>; interrupts = <1 1>; - reg = <7>; + reg = <0x7>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; interrupts = <2 1>; - reg = <1>; + reg = <0x1>; device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupt-parent = <&mpic>; interrupts = <1 1>; - reg = <2>; + reg = <0x2>; device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; interrupts = <2 1>; - reg = <3>; + reg = <0x3>; device_type = "ethernet-phy"; }; }; @@ -146,9 +143,9 @@ device_type = "network"; model = "eTSEC"; compatible = "gianfar"; - reg = <24000 1000>; + reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1d 2 1e 2 22 2>; + interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; phy-handle = <&phy2>; }; @@ -158,9 +155,9 @@ device_type = "network"; model = "eTSEC"; compatible = "gianfar"; - reg = <25000 1000>; + reg = <0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <23 2 24 2 28 2>; + interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; phy-handle = <&phy3>; }; @@ -169,15 +166,15 @@ cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; + reg = <0x4500 0x100>; clock-frequency = <0>; - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; global-utilities@e0000 { //global utilities block compatible = "fsl,mpc8548-guts"; - reg = <e0000 1000>; + reg = <0xe0000 0x1000>; fsl,has-rstcr; }; @@ -185,9 +182,9 @@ cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <4600 100>; + reg = <0x4600 0x100>; clock-frequency = <0>; - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; @@ -195,13 +192,13 @@ device_type = "crypto"; model = "SEC2"; compatible = "talitos"; - reg = <30000 f000>; - interrupts = <2d 2>; + reg = <0x30000 0xf000>; + interrupts = <45 2>; interrupt-parent = <&mpic>; num-channels = <4>; - channel-fifo-len = <18>; - exec-units-mask = <000000fe>; - descriptor-types-mask = <012b0ebf>; + channel-fifo-len = <24>; + exec-units-mask = <0xfe>; + descriptor-types-mask = <0x12b0ebf>; }; mpic: pic@40000 { @@ -209,73 +206,73 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <40000 40000>; + reg = <0x40000 0x40000>; compatible = "chrp,open-pic"; device_type = "open-pic"; big-endian; }; par_io@e0100 { - reg = <e0100 100>; + reg = <0xe0100 0x100>; device_type = "par_io"; num-ports = <7>; pio1: ucc_pin@01 { pio-map = < /* port pin dir open_drain assignment has_irq */ - 4 0a 1 0 2 0 /* TxD0 */ - 4 09 1 0 2 0 /* TxD1 */ - 4 08 1 0 2 0 /* TxD2 */ - 4 07 1 0 2 0 /* TxD3 */ - 4 17 1 0 2 0 /* TxD4 */ - 4 16 1 0 2 0 /* TxD5 */ - 4 15 1 0 2 0 /* TxD6 */ - 4 14 1 0 2 0 /* TxD7 */ - 4 0f 2 0 2 0 /* RxD0 */ - 4 0e 2 0 2 0 /* RxD1 */ - 4 0d 2 0 2 0 /* RxD2 */ - 4 0c 2 0 2 0 /* RxD3 */ - 4 1d 2 0 2 0 /* RxD4 */ - 4 1c 2 0 2 0 /* RxD5 */ - 4 1b 2 0 2 0 /* RxD6 */ - 4 1a 2 0 2 0 /* RxD7 */ - 4 0b 1 0 2 0 /* TX_EN */ - 4 18 1 0 2 0 /* TX_ER */ - 4 10 2 0 2 0 /* RX_DV */ - 4 1e 2 0 2 0 /* RX_ER */ - 4 11 2 0 2 0 /* RX_CLK */ - 4 13 1 0 2 0 /* GTX_CLK */ - 1 1f 2 0 3 0>; /* GTX125 */ + 0x4 0xa 0x1 0x0 0x2 0x0 /* TxD0 */ + 0x4 0x9 0x1 0x0 0x2 0x0 /* TxD1 */ + 0x4 0x8 0x1 0x0 0x2 0x0 /* TxD2 */ + 0x4 0x7 0x1 0x0 0x2 0x0 /* TxD3 */ + 0x4 0x17 0x1 0x0 0x2 0x0 /* TxD4 */ + 0x4 0x16 0x1 0x0 0x2 0x0 /* TxD5 */ + 0x4 0x15 0x1 0x0 0x2 0x0 /* TxD6 */ + 0x4 0x14 0x1 0x0 0x2 0x0 /* TxD7 */ + 0x4 0xf 0x2 0x0 0x2 0x0 /* RxD0 */ + 0x4 0xe 0x2 0x0 0x2 0x0 /* RxD1 */ + 0x4 0xd 0x2 0x0 0x2 0x0 /* RxD2 */ + 0x4 0xc 0x2 0x0 0x2 0x0 /* RxD3 */ + 0x4 0x1d 0x2 0x0 0x2 0x0 /* RxD4 */ + 0x4 0x1c 0x2 0x0 0x2 0x0 /* RxD5 */ + 0x4 0x1b 0x2 0x0 0x2 0x0 /* RxD6 */ + 0x4 0x1a 0x2 0x0 0x2 0x0 /* RxD7 */ + 0x4 0xb 0x1 0x0 0x2 0x0 /* TX_EN */ + 0x4 0x18 0x1 0x0 0x2 0x0 /* TX_ER */ + 0x4 0x10 0x2 0x0 0x2 0x0 /* RX_DV */ + 0x4 0x1e 0x2 0x0 0x2 0x0 /* RX_ER */ + 0x4 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */ + 0x4 0x13 0x1 0x0 0x2 0x0 /* GTX_CLK */ + 0x1 0x1f 0x2 0x0 0x3 0x0>; /* GTX125 */ }; pio2: ucc_pin@02 { pio-map = < /* port pin dir open_drain assignment has_irq */ - 5 0a 1 0 2 0 /* TxD0 */ - 5 09 1 0 2 0 /* TxD1 */ - 5 08 1 0 2 0 /* TxD2 */ - 5 07 1 0 2 0 /* TxD3 */ - 5 17 1 0 2 0 /* TxD4 */ - 5 16 1 0 2 0 /* TxD5 */ - 5 15 1 0 2 0 /* TxD6 */ - 5 14 1 0 2 0 /* TxD7 */ - 5 0f 2 0 2 0 /* RxD0 */ - 5 0e 2 0 2 0 /* RxD1 */ - 5 0d 2 0 2 0 /* RxD2 */ - 5 0c 2 0 2 0 /* RxD3 */ - 5 1d 2 0 2 0 /* RxD4 */ - 5 1c 2 0 2 0 /* RxD5 */ - 5 1b 2 0 2 0 /* RxD6 */ - 5 1a 2 0 2 0 /* RxD7 */ - 5 0b 1 0 2 0 /* TX_EN */ - 5 18 1 0 2 0 /* TX_ER */ - 5 10 2 0 2 0 /* RX_DV */ - 5 1e 2 0 2 0 /* RX_ER */ - 5 11 2 0 2 0 /* RX_CLK */ - 5 13 1 0 2 0 /* GTX_CLK */ - 1 1f 2 0 3 0 /* GTX125 */ - 4 06 3 0 2 0 /* MDIO */ - 4 05 1 0 2 0>; /* MDC */ + 0x5 0xa 0x1 0x0 0x2 0x0 /* TxD0 */ + 0x5 0x9 0x1 0x0 0x2 0x0 /* TxD1 */ + 0x5 0x8 0x1 0x0 0x2 0x0 /* TxD2 */ + 0x5 0x7 0x1 0x0 0x2 0x0 /* TxD3 */ + 0x5 0x17 0x1 0x0 0x2 0x0 /* TxD4 */ + 0x5 0x16 0x1 0x0 0x2 0x0 /* TxD5 */ + 0x5 0x15 0x1 0x0 0x2 0x0 /* TxD6 */ + 0x5 0x14 0x1 0x0 0x2 0x0 /* TxD7 */ + 0x5 0xf 0x2 0x0 0x2 0x0 /* RxD0 */ + 0x5 0xe 0x2 0x0 0x2 0x0 /* RxD1 */ + 0x5 0xd 0x2 0x0 0x2 0x0 /* RxD2 */ + 0x5 0xc 0x2 0x0 0x2 0x0 /* RxD3 */ + 0x5 0x1d 0x2 0x0 0x2 0x0 /* RxD4 */ + 0x5 0x1c 0x2 0x0 0x2 0x0 /* RxD5 */ + 0x5 0x1b 0x2 0x0 0x2 0x0 /* RxD6 */ + 0x5 0x1a 0x2 0x0 0x2 0x0 /* RxD7 */ + 0x5 0xb 0x1 0x0 0x2 0x0 /* TX_EN */ + 0x5 0x18 0x1 0x0 0x2 0x0 /* TX_ER */ + 0x5 0x10 0x2 0x0 0x2 0x0 /* RX_DV */ + 0x5 0x1e 0x2 0x0 0x2 0x0 /* RX_ER */ + 0x5 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */ + 0x5 0x13 0x1 0x0 0x2 0x0 /* GTX_CLK */ + 0x1 0x1f 0x2 0x0 0x3 0x0 /* GTX125 */ + 0x4 0x6 0x3 0x0 0x2 0x0 /* MDIO */ + 0x4 0x5 0x1 0x0 0x2 0x0>; /* MDC */ }; }; }; @@ -285,28 +282,28 @@ #size-cells = <1>; device_type = "qe"; compatible = "fsl,qe"; - ranges = <0 e0080000 00040000>; - reg = <e0080000 480>; + ranges = <0x0 0xe0080000 0x40000>; + reg = <0xe0080000 0x480>; brg-frequency = <0>; - bus-frequency = <179A7B00>; + bus-frequency = <396000000>; muram@10000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,qe-muram", "fsl,cpm-muram"; - ranges = <0 00010000 0000c000>; + ranges = <0x0 0x10000 0x10000>; data-only@0 { compatible = "fsl,qe-muram-data", "fsl,cpm-muram-data"; - reg = <0 c000>; + reg = <0x0 0x10000>; }; }; spi@4c0 { cell-index = <0>; compatible = "fsl,spi"; - reg = <4c0 40>; + reg = <0x4c0 0x40>; interrupts = <2>; interrupt-parent = <&qeic>; mode = "cpu"; @@ -315,7 +312,7 @@ spi@500 { cell-index = <1>; compatible = "fsl,spi"; - reg = <500 40>; + reg = <0x500 0x40>; interrupts = <1>; interrupt-parent = <&qeic>; mode = "cpu"; @@ -324,11 +321,9 @@ enet2: ucc@2000 { device_type = "network"; compatible = "ucc_geth"; - model = "UCC"; cell-index = <1>; - device-id = <1>; - reg = <2000 200>; - interrupts = <20>; + reg = <0x2000 0x200>; + interrupts = <32>; interrupt-parent = <&qeic>; local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock-name = "none"; @@ -341,11 +336,9 @@ enet3: ucc@3000 { device_type = "network"; compatible = "ucc_geth"; - model = "UCC"; cell-index = <2>; - device-id = <2>; - reg = <3000 200>; - interrupts = <21>; + reg = <0x3000 0x200>; + interrupts = <33>; interrupt-parent = <&qeic>; local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock-name = "none"; @@ -358,7 +351,7 @@ mdio@2120 { #address-cells = <1>; #size-cells = <0>; - reg = <2120 18>; + reg = <0x2120 0x18>; compatible = "fsl,ucc-mdio"; /* These are the same PHYs as on @@ -366,25 +359,25 @@ qe_phy0: ethernet-phy@07 { interrupt-parent = <&mpic>; interrupts = <1 1>; - reg = <7>; + reg = <0x7>; device_type = "ethernet-phy"; }; qe_phy1: ethernet-phy@01 { interrupt-parent = <&mpic>; interrupts = <2 1>; - reg = <1>; + reg = <0x1>; device_type = "ethernet-phy"; }; qe_phy2: ethernet-phy@02 { interrupt-parent = <&mpic>; interrupts = <1 1>; - reg = <2>; + reg = <0x2>; device_type = "ethernet-phy"; }; qe_phy3: ethernet-phy@03 { interrupt-parent = <&mpic>; interrupts = <2 1>; - reg = <3>; + reg = <0x3>; device_type = "ethernet-phy"; }; }; @@ -394,9 +387,9 @@ compatible = "fsl,qe-ic"; #address-cells = <0>; #interrupt-cells = <1>; - reg = <80 80>; + reg = <0x80 0x80>; big-endian; - interrupts = <2e 2 2e 2>; //high:30 low:30 + interrupts = <46 2 46 2>; //high:30 low:30 interrupt-parent = <&mpic>; }; @@ -404,30 +397,30 @@ pci0: pci@e0008000 { cell-index = <0>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x12 AD18 */ - 9000 0 0 1 &mpic 5 1 - 9000 0 0 2 &mpic 6 1 - 9000 0 0 3 &mpic 7 1 - 9000 0 0 4 &mpic 4 1 + 0x9000 0x0 0x0 0x1 &mpic 0x5 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x6 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x7 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 /* IDSEL 0x13 AD19 */ - 9800 0 0 1 &mpic 6 1 - 9800 0 0 2 &mpic 7 1 - 9800 0 0 3 &mpic 4 1 - 9800 0 0 4 &mpic 5 1>; + 0x9800 0x0 0x0 0x1 &mpic 0x6 0x1 + 0x9800 0x0 0x0 0x2 &mpic 0x7 0x1 + 0x9800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x9800 0x0 0x0 0x4 &mpic 0x5 0x1>; interrupt-parent = <&mpic>; - interrupts = <18 2>; - bus-range = <0 ff>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e2000000 0 00800000>; - clock-frequency = <3f940aa>; + interrupts = <24 2>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0008000 1000>; + reg = <0xe0008000 0x1000>; compatible = "fsl,mpc8540-pci"; device_type = "pci"; }; @@ -435,39 +428,39 @@ /* PCI Express */ pci1: pcie@e000a000 { cell-index = <2>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0 (PEX) */ - 00000 0 0 1 &mpic 0 1 - 00000 0 0 2 &mpic 1 1 - 00000 0 0 3 &mpic 2 1 - 00000 0 0 4 &mpic 3 1>; + 00000 0x0 0x0 0x1 &mpic 0x0 0x1 + 00000 0x0 0x0 0x2 &mpic 0x1 0x1 + 00000 0x0 0x0 0x3 &mpic 0x2 0x1 + 00000 0x0 0x0 0x4 &mpic 0x3 0x1>; interrupt-parent = <&mpic>; - interrupts = <1a 2>; - bus-range = <0 ff>; - ranges = <02000000 0 a0000000 a0000000 0 10000000 - 01000000 0 00000000 e2800000 0 00800000>; - clock-frequency = <1fca055>; + interrupts = <26 2>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>; + clock-frequency = <33333333>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e000a000 1000>; + reg = <0xe000a000 0x1000>; compatible = "fsl,mpc8548-pcie"; device_type = "pci"; pcie@0 { - reg = <0 0 0 0 0>; + reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - ranges = <02000000 0 a0000000 - 02000000 0 a0000000 - 0 10000000 + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x10000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00800000>; + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x800000>; }; }; }; diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts index db37214aee37..66f27ab613a2 100644 --- a/arch/powerpc/boot/dts/mpc8572ds.dts +++ b/arch/powerpc/boot/dts/mpc8572ds.dts @@ -1,7 +1,7 @@ /* * MPC8572 DS Device Tree Source * - * Copyright 2007 Freescale Semiconductor Inc. + * Copyright 2007, 2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,6 +9,7 @@ * option) any later version. */ +/dts-v1/; / { model = "fsl,MPC8572DS"; compatible = "fsl,MPC8572DS"; @@ -33,11 +34,11 @@ PowerPC,8572@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; @@ -45,11 +46,11 @@ PowerPC,8572@1 { device_type = "cpu"; - reg = <1>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K + reg = <0x1>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; @@ -58,38 +59,38 @@ memory { device_type = "memory"; - reg = <00000000 00000000>; // Filled by U-Boot + reg = <0x0 0x0>; // Filled by U-Boot }; soc8572@ffe00000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <00000000 ffe00000 00100000>; - reg = <ffe00000 00001000>; // CCSRBAR & soc regs, remove once parse code for immrbase fixed + ranges = <0x0 0xffe00000 0x100000>; + reg = <0xffe00000 0x1000>; // CCSRBAR & soc regs, remove once parse code for immrbase fixed bus-frequency = <0>; // Filled out by uboot. memory-controller@2000 { compatible = "fsl,mpc8572-memory-controller"; - reg = <2000 1000>; + reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; - interrupts = <12 2>; + interrupts = <18 2>; }; memory-controller@6000 { compatible = "fsl,mpc8572-memory-controller"; - reg = <6000 1000>; + reg = <0x6000 0x1000>; interrupt-parent = <&mpic>; - interrupts = <12 2>; + interrupts = <18 2>; }; l2-cache-controller@20000 { compatible = "fsl,mpc8572-l2-cache-controller"; - reg = <20000 1000>; - cache-line-size = <20>; // 32 bytes - cache-size = <80000>; // L2, 512K + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K interrupt-parent = <&mpic>; - interrupts = <10 2>; + interrupts = <16 2>; }; i2c@3000 { @@ -97,8 +98,8 @@ #size-cells = <0>; cell-index = <0>; compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = <2b 2>; + reg = <0x3000 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -108,8 +109,8 @@ #size-cells = <0>; cell-index = <1>; compatible = "fsl-i2c"; - reg = <3100 100>; - interrupts = <2b 2>; + reg = <0x3100 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -118,27 +119,27 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-mdio"; - reg = <24520 20>; + reg = <0x24520 0x20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; - interrupts = <a 1>; - reg = <0>; + interrupts = <10 1>; + reg = <0x0>; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; - interrupts = <a 1>; - reg = <1>; + interrupts = <10 1>; + reg = <0x1>; }; phy2: ethernet-phy@2 { interrupt-parent = <&mpic>; - interrupts = <a 1>; - reg = <2>; + interrupts = <10 1>; + reg = <0x2>; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; - interrupts = <a 1>; - reg = <3>; + interrupts = <10 1>; + reg = <0x3>; }; }; @@ -147,9 +148,9 @@ device_type = "network"; model = "eTSEC"; compatible = "gianfar"; - reg = <24000 1000>; + reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1d 2 1e 2 22 2>; + interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; @@ -160,9 +161,9 @@ device_type = "network"; model = "eTSEC"; compatible = "gianfar"; - reg = <25000 1000>; + reg = <0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <23 2 24 2 28 2>; + interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; @@ -173,9 +174,9 @@ device_type = "network"; model = "eTSEC"; compatible = "gianfar"; - reg = <26000 1000>; + reg = <0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1f 2 20 2 21 2>; + interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; phy-handle = <&phy2>; phy-connection-type = "rgmii-id"; @@ -186,9 +187,9 @@ device_type = "network"; model = "eTSEC"; compatible = "gianfar"; - reg = <27000 1000>; + reg = <0x27000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <25 2 26 2 27 2>; + interrupts = <37 2 38 2 39 2>; interrupt-parent = <&mpic>; phy-handle = <&phy3>; phy-connection-type = "rgmii-id"; @@ -198,9 +199,9 @@ cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; + reg = <0x4500 0x100>; clock-frequency = <0>; - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; @@ -208,15 +209,15 @@ cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <4600 100>; + reg = <0x4600 0x100>; clock-frequency = <0>; - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; global-utilities@e0000 { //global utilities block compatible = "fsl,mpc8572-guts"; - reg = <e0000 1000>; + reg = <0xe0000 0x1000>; fsl,has-rstcr; }; @@ -225,7 +226,7 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <40000 40000>; + reg = <0x40000 0x40000>; compatible = "chrp,open-pic"; device_type = "open-pic"; big-endian; @@ -239,167 +240,167 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <ffe08000 1000>; - bus-range = <0 ff>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 ffc00000 0 00010000>; - clock-frequency = <1fca055>; + reg = <0xffe08000 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xffc00000 0x0 0x10000>; + clock-frequency = <33333333>; interrupt-parent = <&mpic>; - interrupts = <18 2>; - interrupt-map-mask = <ff00 0 0 7>; + interrupts = <24 2>; + interrupt-map-mask = <0xff00 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x11 func 0 - PCI slot 1 */ - 8800 0 0 1 &mpic 2 1 - 8800 0 0 2 &mpic 3 1 - 8800 0 0 3 &mpic 4 1 - 8800 0 0 4 &mpic 1 1 + 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x11 func 1 - PCI slot 1 */ - 8900 0 0 1 &mpic 2 1 - 8900 0 0 2 &mpic 3 1 - 8900 0 0 3 &mpic 4 1 - 8900 0 0 4 &mpic 1 1 + 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x11 func 2 - PCI slot 1 */ - 8a00 0 0 1 &mpic 2 1 - 8a00 0 0 2 &mpic 3 1 - 8a00 0 0 3 &mpic 4 1 - 8a00 0 0 4 &mpic 1 1 + 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x11 func 3 - PCI slot 1 */ - 8b00 0 0 1 &mpic 2 1 - 8b00 0 0 2 &mpic 3 1 - 8b00 0 0 3 &mpic 4 1 - 8b00 0 0 4 &mpic 1 1 + 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x11 func 4 - PCI slot 1 */ - 8c00 0 0 1 &mpic 2 1 - 8c00 0 0 2 &mpic 3 1 - 8c00 0 0 3 &mpic 4 1 - 8c00 0 0 4 &mpic 1 1 + 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x11 func 5 - PCI slot 1 */ - 8d00 0 0 1 &mpic 2 1 - 8d00 0 0 2 &mpic 3 1 - 8d00 0 0 3 &mpic 4 1 - 8d00 0 0 4 &mpic 1 1 + 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x11 func 6 - PCI slot 1 */ - 8e00 0 0 1 &mpic 2 1 - 8e00 0 0 2 &mpic 3 1 - 8e00 0 0 3 &mpic 4 1 - 8e00 0 0 4 &mpic 1 1 + 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x11 func 7 - PCI slot 1 */ - 8f00 0 0 1 &mpic 2 1 - 8f00 0 0 2 &mpic 3 1 - 8f00 0 0 3 &mpic 4 1 - 8f00 0 0 4 &mpic 1 1 + 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x12 func 0 - PCI slot 2 */ - 9000 0 0 1 &mpic 3 1 - 9000 0 0 2 &mpic 4 1 - 9000 0 0 3 &mpic 1 1 - 9000 0 0 4 &mpic 2 1 + 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 0x12 func 1 - PCI slot 2 */ - 9100 0 0 1 &mpic 3 1 - 9100 0 0 2 &mpic 4 1 - 9100 0 0 3 &mpic 1 1 - 9100 0 0 4 &mpic 2 1 + 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 0x12 func 2 - PCI slot 2 */ - 9200 0 0 1 &mpic 3 1 - 9200 0 0 2 &mpic 4 1 - 9200 0 0 3 &mpic 1 1 - 9200 0 0 4 &mpic 2 1 + 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 0x12 func 3 - PCI slot 2 */ - 9300 0 0 1 &mpic 3 1 - 9300 0 0 2 &mpic 4 1 - 9300 0 0 3 &mpic 1 1 - 9300 0 0 4 &mpic 2 1 + 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 0x12 func 4 - PCI slot 2 */ - 9400 0 0 1 &mpic 3 1 - 9400 0 0 2 &mpic 4 1 - 9400 0 0 3 &mpic 1 1 - 9400 0 0 4 &mpic 2 1 + 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 0x12 func 5 - PCI slot 2 */ - 9500 0 0 1 &mpic 3 1 - 9500 0 0 2 &mpic 4 1 - 9500 0 0 3 &mpic 1 1 - 9500 0 0 4 &mpic 2 1 + 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 0x12 func 6 - PCI slot 2 */ - 9600 0 0 1 &mpic 3 1 - 9600 0 0 2 &mpic 4 1 - 9600 0 0 3 &mpic 1 1 - 9600 0 0 4 &mpic 2 1 + 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 0x12 func 7 - PCI slot 2 */ - 9700 0 0 1 &mpic 3 1 - 9700 0 0 2 &mpic 4 1 - 9700 0 0 3 &mpic 1 1 - 9700 0 0 4 &mpic 2 1 + 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1 // IDSEL 0x1c USB - e000 0 0 1 &i8259 c 2 - e100 0 0 2 &i8259 9 2 - e200 0 0 3 &i8259 a 2 - e300 0 0 4 &i8259 b 2 + 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2 + 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2 + 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2 + 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2 // IDSEL 0x1d Audio - e800 0 0 1 &i8259 6 2 + 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 // IDSEL 0x1e Legacy - f000 0 0 1 &i8259 7 2 - f100 0 0 1 &i8259 7 2 + 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 + 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 // IDSEL 0x1f IDE/SATA - f800 0 0 1 &i8259 e 2 - f900 0 0 1 &i8259 5 2 + 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 + 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 >; pcie@0 { - reg = <0 0 0 0 0>; + reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - ranges = <02000000 0 80000000 - 02000000 0 80000000 - 0 20000000 + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00100000>; + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; uli1575@0 { - reg = <0 0 0 0 0>; + reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; - ranges = <02000000 0 80000000 - 02000000 0 80000000 - 0 20000000 + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00100000>; + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; isa@1e { device_type = "isa"; #interrupt-cells = <2>; #size-cells = <1>; #address-cells = <2>; - reg = <f000 0 0 0 0>; - ranges = <1 0 01000000 0 0 - 00001000>; + reg = <0xf000 0x0 0x0 0x0 0x0>; + ranges = <0x1 0x0 0x1000000 0x0 0x0 + 0x1000>; interrupt-parent = <&i8259>; i8259: interrupt-controller@20 { - reg = <1 20 2 - 1 a0 2 - 1 4d0 2>; + reg = <0x1 0x20 0x2 + 0x1 0xa0 0x2 + 0x1 0x4d0 0x2>; interrupt-controller; device_type = "interrupt-controller"; #address-cells = <0>; @@ -412,29 +413,29 @@ i8042@60 { #size-cells = <0>; #address-cells = <1>; - reg = <1 60 1 1 64 1>; - interrupts = <1 3 c 3>; + reg = <0x1 0x60 0x1 0x1 0x64 0x1>; + interrupts = <1 3 12 3>; interrupt-parent = <&i8259>; keyboard@0 { - reg = <0>; + reg = <0x0>; compatible = "pnpPNP,303"; }; mouse@1 { - reg = <1>; + reg = <0x1>; compatible = "pnpPNP,f03"; }; }; rtc@70 { compatible = "pnpPNP,b00"; - reg = <1 70 2>; + reg = <0x1 0x70 0x2>; }; gpio@400 { - reg = <1 400 80>; + reg = <0x1 0x400 0x80>; }; }; }; @@ -449,33 +450,33 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <ffe09000 1000>; - bus-range = <0 ff>; - ranges = <02000000 0 a0000000 a0000000 0 20000000 - 01000000 0 00000000 ffc10000 0 00010000>; - clock-frequency = <1fca055>; + reg = <0xffe09000 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xffc10000 0x0 0x10000>; + clock-frequency = <33333333>; interrupt-parent = <&mpic>; - interrupts = <1a 2>; - interrupt-map-mask = <f800 0 0 7>; + interrupts = <26 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 4 1 - 0000 0 0 2 &mpic 5 1 - 0000 0 0 3 &mpic 6 1 - 0000 0 0 4 &mpic 7 1 + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 >; pcie@0 { - reg = <0 0 0 0 0>; + reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - ranges = <02000000 0 a0000000 - 02000000 0 a0000000 - 0 20000000 + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00100000>; + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; }; }; @@ -486,33 +487,33 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <ffe0a000 1000>; - bus-range = <0 ff>; - ranges = <02000000 0 c0000000 c0000000 0 20000000 - 01000000 0 00000000 ffc20000 0 00010000>; - clock-frequency = <1fca055>; + reg = <0xffe0a000 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xffc20000 0x0 0x10000>; + clock-frequency = <33333333>; interrupt-parent = <&mpic>; - interrupts = <1b 2>; - interrupt-map-mask = <f800 0 0 7>; + interrupts = <27 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 0 1 - 0000 0 0 2 &mpic 1 1 - 0000 0 0 3 &mpic 2 1 - 0000 0 0 4 &mpic 3 1 + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 >; pcie@0 { - reg = <0 0 0 0 0>; + reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - ranges = <02000000 0 c0000000 - 02000000 0 c0000000 - 0 20000000 + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00100000>; + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; }; }; }; diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts index 16c947b8a721..1f2f1e0a5571 100644 --- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts +++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts @@ -45,6 +45,11 @@ reg = <0x00000000 0x20000000>; // 512M at 0x0 }; + board-control@e8000000 { + compatible = "fsl,fpga-pixis"; + reg = <0xe8000000 32>; // pixis at 0xe8000000 + }; + soc@e0000000 { #address-cells = <1>; #size-cells = <1>; @@ -104,6 +109,13 @@ interrupt-parent = <&mpic>; }; + display@2c000 { + compatible = "fsl,diu"; + reg = <0x2c000 100>; + interrupts = <72 2>; + interrupt-parent = <&mpic>; + }; + mpic: interrupt-controller@40000 { clock-frequency = <0>; interrupt-controller; diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts index 79385bcd5c5f..7f9b999843ce 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -13,7 +13,7 @@ / { model = "MPC8641HPCN"; - compatible = "mpc86xx"; + compatible = "fsl,mpc8641hpcn"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/powerpc/boot/dts/mpc866ads.dts b/arch/powerpc/boot/dts/mpc866ads.dts index daf9433e906b..765e43c997da 100644 --- a/arch/powerpc/boot/dts/mpc866ads.dts +++ b/arch/powerpc/boot/dts/mpc866ads.dts @@ -2,6 +2,7 @@ * MPC866 ADS Device Tree Source * * Copyright 2006 MontaVista Software, Inc. + * Copyright 2008 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,6 +10,7 @@ * option) any later version. */ +/dts-v1/; / { model = "MPC866ADS"; @@ -22,37 +24,37 @@ PowerPC,866@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <10>; // 16 bytes - i-cache-line-size = <10>; // 16 bytes - d-cache-size = <2000>; // L1, 8K - i-cache-size = <4000>; // L1, 16K + reg = <0x0>; + d-cache-line-size = <16>; // 16 bytes + i-cache-line-size = <16>; // 16 bytes + d-cache-size = <0x2000>; // L1, 8K + i-cache-size = <0x4000>; // L1, 16K timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; - interrupts = <f 2>; // decrementer interrupt + interrupts = <15 2>; // decrementer interrupt interrupt-parent = <&PIC>; }; }; memory { device_type = "memory"; - reg = <00000000 800000>; + reg = <0x0 0x800000>; }; localbus@ff000100 { compatible = "fsl,mpc866-localbus", "fsl,pq1-localbus"; #address-cells = <2>; #size-cells = <1>; - reg = <ff000100 40>; + reg = <0xff000100 0x40>; ranges = < - 1 0 ff080000 00008000 - 5 0 ff0a0000 00008000 + 0x1 0x0 0xff080000 0x8000 + 0x5 0x0 0xff0a0000 0x8000 >; board-control@1,0 { - reg = <1 0 20 5 300 4>; + reg = <0x1 0x0 0x20 0x5 0x300 0x4>; compatible = "fsl,mpc866ads-bcsr"; }; }; @@ -61,17 +63,17 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0 ff000000 00100000>; - reg = <ff000000 00000200>; + ranges = <0x0 0xff000000 0x100000>; + reg = <0xff000000 0x200>; bus-frequency = <0>; mdio@e00 { compatible = "fsl,mpc866-fec-mdio", "fsl,pq1-fec-mdio"; - reg = <e00 188>; + reg = <0xe00 0x188>; #address-cells = <1>; #size-cells = <0>; PHY: ethernet-phy@f { - reg = <f>; + reg = <0xf>; device_type = "ethernet-phy"; }; }; @@ -80,7 +82,7 @@ device_type = "network"; compatible = "fsl,mpc866-fec-enet", "fsl,pq1-fec-enet"; - reg = <e00 188>; + reg = <0xe00 0x188>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <3 1>; interrupt-parent = <&PIC>; @@ -91,7 +93,7 @@ PIC: pic@0 { interrupt-controller; #interrupt-cells = <2>; - reg = <0 24>; + reg = <0x0 0x24>; compatible = "fsl,mpc866-pic", "fsl,pq1-pic"; }; @@ -100,7 +102,7 @@ #size-cells = <1>; compatible = "fsl,mpc866-cpm", "fsl,cpm1"; ranges; - reg = <9c0 40>; + reg = <0x9c0 0x40>; brg-frequency = <0>; interrupts = <0 2>; // cpm error interrupt interrupt-parent = <&CPM_PIC>; @@ -108,11 +110,11 @@ muram@2000 { #address-cells = <1>; #size-cells = <1>; - ranges = <0 2000 2000>; + ranges = <0x0 0x2000 0x2000>; data@0 { compatible = "fsl,cpm-muram-data"; - reg = <0 1c00>; + reg = <0x0 0x1c00>; }; }; @@ -120,7 +122,7 @@ compatible = "fsl,mpc866-brg", "fsl,cpm1-brg", "fsl,cpm-brg"; - reg = <9f0 10>; + reg = <0x9f0 0x10>; clock-frequency = <0>; }; @@ -130,7 +132,7 @@ #interrupt-cells = <1>; interrupts = <5 2 0 2>; interrupt-parent = <&PIC>; - reg = <930 20>; + reg = <0x930 0x20>; compatible = "fsl,mpc866-cpm-pic", "fsl,cpm1-pic"; }; @@ -140,31 +142,31 @@ device_type = "serial"; compatible = "fsl,mpc866-smc-uart", "fsl,cpm1-smc-uart"; - reg = <a80 10 3e80 40>; + reg = <0xa80 0x10 0x3e80 0x40>; interrupts = <4>; interrupt-parent = <&CPM_PIC>; fsl,cpm-brg = <1>; - fsl,cpm-command = <0090>; + fsl,cpm-command = <0x90>; }; serial@a90 { device_type = "serial"; compatible = "fsl,mpc866-smc-uart", "fsl,cpm1-smc-uart"; - reg = <a90 10 3f80 40>; + reg = <0xa90 0x10 0x3f80 0x40>; interrupts = <3>; interrupt-parent = <&CPM_PIC>; fsl,cpm-brg = <2>; - fsl,cpm-command = <00d0>; + fsl,cpm-command = <0xd0>; }; ethernet@a00 { device_type = "network"; compatible = "fsl,mpc866-scc-enet", "fsl,cpm1-scc-enet"; - reg = <a00 18 3c00 100>; + reg = <0xa00 0x18 0x3c00 0x100>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1e>; + interrupts = <30>; interrupt-parent = <&CPM_PIC>; fsl,cpm-command = <0000>; linux,network-index = <1>; diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts index d84a012c2aaf..9895043722b9 100644 --- a/arch/powerpc/boot/dts/mpc885ads.dts +++ b/arch/powerpc/boot/dts/mpc885ads.dts @@ -2,7 +2,7 @@ * MPC885 ADS Device Tree Source * * Copyright 2006 MontaVista Software, Inc. - * Copyright 2007 Freescale Semiconductor, Inc. + * Copyright 2007,2008 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -10,6 +10,7 @@ * option) any later version. */ +/dts-v1/; / { model = "MPC885ADS"; @@ -23,45 +24,45 @@ PowerPC,885@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <d#16>; - i-cache-line-size = <d#16>; - d-cache-size = <d#8192>; - i-cache-size = <d#8192>; + reg = <0x0>; + d-cache-line-size = <16>; + i-cache-line-size = <16>; + d-cache-size = <8192>; + i-cache-size = <8192>; timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; - interrupts = <f 2>; // decrementer interrupt + interrupts = <15 2>; // decrementer interrupt interrupt-parent = <&PIC>; }; }; memory { device_type = "memory"; - reg = <0 0>; + reg = <0x0 0x0>; }; localbus@ff000100 { compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus"; #address-cells = <2>; #size-cells = <1>; - reg = <ff000100 40>; + reg = <0xff000100 0x40>; ranges = < - 0 0 fe000000 00800000 - 1 0 ff080000 00008000 - 5 0 ff0a0000 00008000 + 0x0 0x0 0xfe000000 0x800000 + 0x1 0x0 0xff080000 0x8000 + 0x5 0x0 0xff0a0000 0x8000 >; flash@0,0 { compatible = "jedec-flash"; - reg = <0 0 800000>; + reg = <0x0 0x0 0x800000>; bank-width = <4>; device-width = <1>; }; board-control@1,0 { - reg = <1 0 20 5 300 4>; + reg = <0x1 0x0 0x20 0x5 0x300 0x4>; compatible = "fsl,mpc885ads-bcsr"; }; }; @@ -71,30 +72,30 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0 ff000000 00004000>; + ranges = <0x0 0xff000000 0x4000>; bus-frequency = <0>; // Temporary -- will go away once kernel uses ranges for get_immrbase(). - reg = <ff000000 4000>; + reg = <0xff000000 0x4000>; mdio@e00 { compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio"; - reg = <e00 188>; + reg = <0xe00 0x188>; #address-cells = <1>; #size-cells = <0>; PHY0: ethernet-phy@0 { - reg = <0>; + reg = <0x0>; device_type = "ethernet-phy"; }; PHY1: ethernet-phy@1 { - reg = <1>; + reg = <0x1>; device_type = "ethernet-phy"; }; PHY2: ethernet-phy@2 { - reg = <2>; + reg = <0x2>; device_type = "ethernet-phy"; }; }; @@ -103,7 +104,7 @@ device_type = "network"; compatible = "fsl,mpc885-fec-enet", "fsl,pq1-fec-enet"; - reg = <e00 188>; + reg = <0xe00 0x188>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <3 1>; interrupt-parent = <&PIC>; @@ -115,7 +116,7 @@ device_type = "network"; compatible = "fsl,mpc885-fec-enet", "fsl,pq1-fec-enet"; - reg = <1e00 188>; + reg = <0x1e00 0x188>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <7 1>; interrupt-parent = <&PIC>; @@ -126,7 +127,7 @@ PIC: interrupt-controller@0 { interrupt-controller; #interrupt-cells = <2>; - reg = <0 24>; + reg = <0x0 0x24>; compatible = "fsl,mpc885-pic", "fsl,pq1-pic"; }; @@ -136,29 +137,29 @@ #size-cells = <2>; compatible = "fsl,pq-pcmcia"; device_type = "pcmcia"; - reg = <80 80>; + reg = <0x80 0x80>; interrupt-parent = <&PIC>; - interrupts = <d 1>; + interrupts = <13 1>; }; cpm@9c0 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc885-cpm", "fsl,cpm1"; - command-proc = <9c0>; + command-proc = <0x9c0>; interrupts = <0>; // cpm error interrupt interrupt-parent = <&CPM_PIC>; - reg = <9c0 40>; + reg = <0x9c0 0x40>; ranges; muram@2000 { #address-cells = <1>; #size-cells = <1>; - ranges = <0 2000 2000>; + ranges = <0x0 0x2000 0x2000>; data@0 { compatible = "fsl,cpm-muram-data"; - reg = <0 1c00>; + reg = <0x0 0x1c00>; }; }; @@ -167,7 +168,7 @@ "fsl,cpm1-brg", "fsl,cpm-brg"; clock-frequency = <0>; - reg = <9f0 10>; + reg = <0x9f0 0x10>; }; CPM_PIC: interrupt-controller@930 { @@ -175,7 +176,7 @@ #interrupt-cells = <1>; interrupts = <5 2 0 2>; interrupt-parent = <&PIC>; - reg = <930 20>; + reg = <0x930 0x20>; compatible = "fsl,mpc885-cpm-pic", "fsl,cpm1-pic"; }; @@ -184,34 +185,34 @@ device_type = "serial"; compatible = "fsl,mpc885-smc-uart", "fsl,cpm1-smc-uart"; - reg = <a80 10 3e80 40>; + reg = <0xa80 0x10 0x3e80 0x40>; interrupts = <4>; interrupt-parent = <&CPM_PIC>; fsl,cpm-brg = <1>; - fsl,cpm-command = <0090>; + fsl,cpm-command = <0x90>; }; serial@a90 { device_type = "serial"; compatible = "fsl,mpc885-smc-uart", "fsl,cpm1-smc-uart"; - reg = <a90 10 3f80 40>; + reg = <0xa90 0x10 0x3f80 0x40>; interrupts = <3>; interrupt-parent = <&CPM_PIC>; fsl,cpm-brg = <2>; - fsl,cpm-command = <00d0>; + fsl,cpm-command = <0xd0>; }; ethernet@a40 { device_type = "network"; compatible = "fsl,mpc885-scc-enet", "fsl,cpm1-scc-enet"; - reg = <a40 18 3e00 100>; + reg = <0xa40 0x18 0x3e00 0x100>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1c>; + interrupts = <28>; interrupt-parent = <&CPM_PIC>; phy-handle = <&PHY2>; - fsl,cpm-command = <0080>; + fsl,cpm-command = <0x80>; linux,network-index = <2>; }; }; diff --git a/arch/powerpc/boot/dts/pq2fads.dts b/arch/powerpc/boot/dts/pq2fads.dts index 2d564921897a..b2d61091b36d 100644 --- a/arch/powerpc/boot/dts/pq2fads.dts +++ b/arch/powerpc/boot/dts/pq2fads.dts @@ -1,7 +1,7 @@ /* * Device Tree for the PQ2FADS-ZU board with an MPC8280 chip. * - * Copyright 2007 Freescale Semiconductor Inc. + * Copyright 2007,2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,6 +9,8 @@ * option) any later version. */ +/dts-v1/; + / { model = "pq2fads"; compatible = "fsl,pq2fads"; @@ -21,11 +23,11 @@ cpu@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <d#32>; - i-cache-line-size = <d#32>; - d-cache-size = <d#16384>; - i-cache-size = <d#16384>; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <16384>; + i-cache-size = <16384>; timebase-frequency = <0>; clock-frequency = <0>; }; @@ -33,7 +35,7 @@ memory { device_type = "memory"; - reg = <0 0>; + reg = <0x0 0x0>; }; localbus@f0010100 { @@ -41,67 +43,67 @@ "fsl,pq2-localbus"; #address-cells = <2>; #size-cells = <1>; - reg = <f0010100 60>; + reg = <0xf0010100 0x60>; - ranges = <0 0 fe000000 00800000 - 1 0 f4500000 00008000 - 8 0 f8200000 00008000>; + ranges = <0x0 0x0 0xfe000000 0x800000 + 0x1 0x0 0xf4500000 0x8000 + 0x8 0x0 0xf8200000 0x8000>; flash@0,0 { compatible = "jedec-flash"; - reg = <0 0 800000>; + reg = <0x0 0x0 0x800000>; bank-width = <4>; device-width = <1>; }; bcsr@1,0 { - reg = <1 0 20>; + reg = <0x1 0x0 0x20>; compatible = "fsl,pq2fads-bcsr"; }; PCI_PIC: pic@8,0 { #interrupt-cells = <1>; interrupt-controller; - reg = <8 0 8>; + reg = <0x8 0x0 0x8>; compatible = "fsl,pq2ads-pci-pic"; interrupt-parent = <&PIC>; - interrupts = <18 8>; + interrupts = <24 8>; }; }; pci@f0010800 { device_type = "pci"; - reg = <f0010800 10c f00101ac 8 f00101c4 8>; + reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>; compatible = "fsl,mpc8280-pci", "fsl,pq2-pci"; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - clock-frequency = <d#66000000>; - interrupt-map-mask = <f800 0 0 7>; + clock-frequency = <66000000>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x16 */ - b000 0 0 1 &PCI_PIC 0 - b000 0 0 2 &PCI_PIC 1 - b000 0 0 3 &PCI_PIC 2 - b000 0 0 4 &PCI_PIC 3 + 0xb000 0x0 0x0 0x1 &PCI_PIC 0 + 0xb000 0x0 0x0 0x2 &PCI_PIC 1 + 0xb000 0x0 0x0 0x3 &PCI_PIC 2 + 0xb000 0x0 0x0 0x4 &PCI_PIC 3 /* IDSEL 0x17 */ - b800 0 0 1 &PCI_PIC 4 - b800 0 0 2 &PCI_PIC 5 - b800 0 0 3 &PCI_PIC 6 - b800 0 0 4 &PCI_PIC 7 + 0xb800 0x0 0x0 0x1 &PCI_PIC 4 + 0xb800 0x0 0x0 0x2 &PCI_PIC 5 + 0xb800 0x0 0x0 0x3 &PCI_PIC 6 + 0xb800 0x0 0x0 0x4 &PCI_PIC 7 /* IDSEL 0x18 */ - c000 0 0 1 &PCI_PIC 8 - c000 0 0 2 &PCI_PIC 9 - c000 0 0 3 &PCI_PIC a - c000 0 0 4 &PCI_PIC b>; + 0xc000 0x0 0x0 0x1 &PCI_PIC 8 + 0xc000 0x0 0x0 0x2 &PCI_PIC 9 + 0xc000 0x0 0x0 0x3 &PCI_PIC 10 + 0xc000 0x0 0x0 0x4 &PCI_PIC 11>; interrupt-parent = <&PIC>; - interrupts = <12 8>; - ranges = <42000000 0 80000000 80000000 0 20000000 - 02000000 0 a0000000 a0000000 0 20000000 - 01000000 0 00000000 f6000000 0 02000000>; + interrupts = <18 8>; + ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xf6000000 0x0 0x2000000>; }; soc@f0000000 { @@ -109,27 +111,27 @@ #size-cells = <1>; device_type = "soc"; compatible = "fsl,mpc8280", "fsl,pq2-soc"; - ranges = <00000000 f0000000 00053000>; + ranges = <0x0 0xf0000000 0x53000>; // Temporary -- will go away once kernel uses ranges for get_immrbase(). - reg = <f0000000 00053000>; + reg = <0xf0000000 0x53000>; cpm@119c0 { #address-cells = <1>; #size-cells = <1>; #interrupt-cells = <2>; compatible = "fsl,mpc8280-cpm", "fsl,cpm2"; - reg = <119c0 30>; + reg = <0x119c0 0x30>; ranges; muram@0 { #address-cells = <1>; #size-cells = <1>; - ranges = <0 0 10000>; + ranges = <0x0 0x0 0x10000>; data@0 { compatible = "fsl,cpm-muram-data"; - reg = <0 2000 9800 800>; + reg = <0x0 0x2000 0x9800 0x800>; }; }; @@ -137,53 +139,53 @@ compatible = "fsl,mpc8280-brg", "fsl,cpm2-brg", "fsl,cpm-brg"; - reg = <119f0 10 115f0 10>; + reg = <0x119f0 0x10 0x115f0 0x10>; }; serial@11a00 { device_type = "serial"; compatible = "fsl,mpc8280-scc-uart", "fsl,cpm2-scc-uart"; - reg = <11a00 20 8000 100>; - interrupts = <28 8>; + reg = <0x11a00 0x20 0x8000 0x100>; + interrupts = <40 8>; interrupt-parent = <&PIC>; fsl,cpm-brg = <1>; - fsl,cpm-command = <00800000>; + fsl,cpm-command = <0x800000>; }; serial@11a20 { device_type = "serial"; compatible = "fsl,mpc8280-scc-uart", "fsl,cpm2-scc-uart"; - reg = <11a20 20 8100 100>; - interrupts = <29 8>; + reg = <0x11a20 0x20 0x8100 0x100>; + interrupts = <41 8>; interrupt-parent = <&PIC>; fsl,cpm-brg = <2>; - fsl,cpm-command = <04a00000>; + fsl,cpm-command = <0x4a00000>; }; ethernet@11320 { device_type = "network"; compatible = "fsl,mpc8280-fcc-enet", "fsl,cpm2-fcc-enet"; - reg = <11320 20 8500 100 113b0 1>; - interrupts = <21 8>; + reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>; + interrupts = <33 8>; interrupt-parent = <&PIC>; phy-handle = <&PHY0>; linux,network-index = <0>; - fsl,cpm-command = <16200300>; + fsl,cpm-command = <0x16200300>; }; ethernet@11340 { device_type = "network"; compatible = "fsl,mpc8280-fcc-enet", "fsl,cpm2-fcc-enet"; - reg = <11340 20 8600 100 113d0 1>; - interrupts = <22 8>; + reg = <0x11340 0x20 0x8600 0x100 0x113d0 0x1>; + interrupts = <34 8>; interrupt-parent = <&PIC>; phy-handle = <&PHY1>; linux,network-index = <1>; - fsl,cpm-command = <1a400300>; + fsl,cpm-command = <0x1a400300>; local-mac-address = [00 e0 0c 00 79 01]; }; @@ -194,21 +196,21 @@ "fsl,cpm2-mdio-bitbang"; #address-cells = <1>; #size-cells = <0>; - reg = <10d40 14>; + reg = <0x10d40 0x14>; fsl,mdio-pin = <9>; - fsl,mdc-pin = <a>; + fsl,mdc-pin = <10>; PHY0: ethernet-phy@0 { interrupt-parent = <&PIC>; - interrupts = <19 2>; - reg = <0>; + interrupts = <25 2>; + reg = <0x0>; device_type = "ethernet-phy"; }; PHY1: ethernet-phy@1 { interrupt-parent = <&PIC>; - interrupts = <19 2>; - reg = <3>; + interrupts = <25 2>; + reg = <0x3>; device_type = "ethernet-phy"; }; }; @@ -218,17 +220,17 @@ #size-cells = <0>; compatible = "fsl,mpc8280-usb", "fsl,cpm2-usb"; - reg = <11b60 18 8b00 100>; + reg = <0x11b60 0x18 0x8b00 0x100>; interrupt-parent = <&PIC>; - interrupts = <b 8>; - fsl,cpm-command = <2e600000>; + interrupts = <11 8>; + fsl,cpm-command = <0x2e600000>; }; }; PIC: interrupt-controller@10c00 { #interrupt-cells = <2>; interrupt-controller; - reg = <10c00 80>; + reg = <0x10c00 0x80>; compatible = "fsl,mpc8280-pic", "fsl,cpm2-pic"; }; diff --git a/arch/powerpc/boot/dts/prpmc2800.dts b/arch/powerpc/boot/dts/prpmc2800.dts index 297dfa53fe9e..1ee6ff43dd57 100644 --- a/arch/powerpc/boot/dts/prpmc2800.dts +++ b/arch/powerpc/boot/dts/prpmc2800.dts @@ -11,6 +11,8 @@ * if it can determine the exact PrPMC type. */ +/dts-v1/; + / { #address-cells = <1>; #size-cells = <1>; @@ -25,46 +27,46 @@ PowerPC,7447 { device_type = "cpu"; reg = <0>; - clock-frequency = <2bb0b140>; /* Default (733 MHz) */ - bus-frequency = <7f28155>; /* 133.333333 MHz */ - timebase-frequency = <1fca055>; /* 33.333333 MHz */ - i-cache-line-size = <20>; - d-cache-line-size = <20>; - i-cache-size = <8000>; - d-cache-size = <8000>; + clock-frequency = <733333333>; /* Default */ + bus-frequency = <133333333>; + timebase-frequency = <33333333>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; }; }; memory { device_type = "memory"; - reg = <00000000 20000000>; /* Default (512MB) */ + reg = <0x0 0x20000000>; /* Default (512MB) */ }; - mv64x60@f1000000 { /* Marvell Discovery */ + system-controller@f1000000 { /* Marvell Discovery mv64360 */ #address-cells = <1>; #size-cells = <1>; model = "mv64360"; /* Default */ - compatible = "marvell,mv64x60"; - clock-frequency = <7f28155>; /* 133.333333 MHz */ - reg = <f1000000 00010000>; - virtual-reg = <f1000000>; - ranges = <88000000 88000000 01000000 /* PCI 0 I/O Space */ - 80000000 80000000 08000000 /* PCI 0 MEM Space */ - a0000000 a0000000 04000000 /* User FLASH */ - 00000000 f1000000 00010000 /* Bridge's regs */ - f2000000 f2000000 00040000>; /* Integrated SRAM */ + compatible = "marvell,mv64360"; + clock-frequency = <133333333>; + reg = <0xf1000000 0x10000>; + virtual-reg = <0xf1000000>; + ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */ + 0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */ + 0xa0000000 0xa0000000 0x4000000 /* User FLASH */ + 0x00000000 0xf1000000 0x0010000 /* Bridge's regs */ + 0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */ flash@a0000000 { device_type = "rom"; compatible = "direct-mapped"; - reg = <a0000000 4000000>; /* Default (64MB) */ + reg = <0xa0000000 0x4000000>; /* Default (64MB) */ probe-type = "CFI"; bank-width = <4>; - partitions = <00000000 00100000 /* RO */ - 00100000 00040001 /* RW */ - 00140000 00400000 /* RO */ - 00540000 039c0000 /* RO */ - 03f00000 00100000>; /* RO */ + partitions = <0x00000000 0x00100000 /* RO */ + 0x00100000 0x00040001 /* RW */ + 0x00140000 0x00400000 /* RO */ + 0x00540000 0x039c0000 /* RO */ + 0x03f00000 0x00100000>; /* RO */ partition-names = "FW Image A", "FW Config Data", "Kernel Image", "Filesystem", "FW Image B"; }; @@ -72,171 +74,153 @@ #address-cells = <1>; #size-cells = <0>; device_type = "mdio"; - compatible = "marvell,mv64x60-mdio"; - ethernet-phy@1 { + compatible = "marvell,mv64360-mdio"; + PHY0: ethernet-phy@1 { device_type = "ethernet-phy"; compatible = "broadcom,bcm5421"; - interrupts = <4c>; /* GPP 12 */ - interrupt-parent = <&/mv64x60/pic>; + interrupts = <76>; /* GPP 12 */ + interrupt-parent = <&PIC>; reg = <1>; }; - ethernet-phy@3 { + PHY1: ethernet-phy@3 { device_type = "ethernet-phy"; compatible = "broadcom,bcm5421"; - interrupts = <4c>; /* GPP 12 */ - interrupt-parent = <&/mv64x60/pic>; + interrupts = <76>; /* GPP 12 */ + interrupt-parent = <&PIC>; reg = <3>; }; }; - ethernet@2000 { - reg = <2000 2000>; - eth0 { + ethernet-group@2000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,mv64360-eth-group"; + reg = <0x2000 0x2000>; + ethernet@0 { device_type = "network"; - compatible = "marvell,mv64x60-eth"; - block-index = <0>; - interrupts = <20>; - interrupt-parent = <&/mv64x60/pic>; - phy = <&/mv64x60/mdio/ethernet-phy@1>; + compatible = "marvell,mv64360-eth"; + reg = <0>; + interrupts = <32>; + interrupt-parent = <&PIC>; + phy = <&PHY0>; local-mac-address = [ 00 00 00 00 00 00 ]; }; - eth1 { + ethernet@1 { device_type = "network"; - compatible = "marvell,mv64x60-eth"; - block-index = <1>; - interrupts = <21>; - interrupt-parent = <&/mv64x60/pic>; - phy = <&/mv64x60/mdio/ethernet-phy@3>; + compatible = "marvell,mv64360-eth"; + reg = <1>; + interrupts = <33>; + interrupt-parent = <&PIC>; + phy = <&PHY1>; local-mac-address = [ 00 00 00 00 00 00 ]; }; }; - sdma@4000 { - device_type = "dma"; - compatible = "marvell,mv64x60-sdma"; - reg = <4000 c18>; - virtual-reg = <f1004000>; - interrupt-base = <0>; - interrupts = <24>; - interrupt-parent = <&/mv64x60/pic>; + SDMA0: sdma@4000 { + compatible = "marvell,mv64360-sdma"; + reg = <0x4000 0xc18>; + virtual-reg = <0xf1004000>; + interrupts = <36>; + interrupt-parent = <&PIC>; }; - sdma@6000 { - device_type = "dma"; - compatible = "marvell,mv64x60-sdma"; - reg = <6000 c18>; - virtual-reg = <f1006000>; - interrupt-base = <0>; - interrupts = <26>; - interrupt-parent = <&/mv64x60/pic>; + SDMA1: sdma@6000 { + compatible = "marvell,mv64360-sdma"; + reg = <0x6000 0xc18>; + virtual-reg = <0xf1006000>; + interrupts = <38>; + interrupt-parent = <&PIC>; }; - brg@b200 { - compatible = "marvell,mv64x60-brg"; - reg = <b200 8>; + BRG0: brg@b200 { + compatible = "marvell,mv64360-brg"; + reg = <0xb200 0x8>; clock-src = <8>; - clock-frequency = <7ed6b40>; - current-speed = <2580>; - bcr = <0>; + clock-frequency = <133333333>; + current-speed = <9600>; }; - brg@b208 { - compatible = "marvell,mv64x60-brg"; - reg = <b208 8>; + BRG1: brg@b208 { + compatible = "marvell,mv64360-brg"; + reg = <0xb208 0x8>; clock-src = <8>; - clock-frequency = <7ed6b40>; - current-speed = <2580>; - bcr = <0>; + clock-frequency = <133333333>; + current-speed = <9600>; }; - cunit@f200 { - reg = <f200 200>; + CUNIT: cunit@f200 { + reg = <0xf200 0x200>; }; - mpscrouting@b400 { - reg = <b400 c>; + MPSCROUTING: mpscrouting@b400 { + reg = <0xb400 0xc>; }; - mpscintr@b800 { - reg = <b800 100>; - virtual-reg = <f100b800>; + MPSCINTR: mpscintr@b800 { + reg = <0xb800 0x100>; + virtual-reg = <0xf100b800>; }; - mpsc@8000 { + MPSC0: mpsc@8000 { device_type = "serial"; - compatible = "marvell,mpsc"; - reg = <8000 38>; - virtual-reg = <f1008000>; - sdma = <&/mv64x60/sdma@4000>; - brg = <&/mv64x60/brg@b200>; - cunit = <&/mv64x60/cunit@f200>; - mpscrouting = <&/mv64x60/mpscrouting@b400>; - mpscintr = <&/mv64x60/mpscintr@b800>; - block-index = <0>; - max_idle = <28>; - chr_1 = <0>; - chr_2 = <0>; - chr_10 = <3>; - mpcr = <0>; - interrupts = <28>; - interrupt-parent = <&/mv64x60/pic>; + compatible = "marvell,mv64360-mpsc"; + reg = <0x8000 0x38>; + virtual-reg = <0xf1008000>; + sdma = <&SDMA0>; + brg = <&BRG0>; + cunit = <&CUNIT>; + mpscrouting = <&MPSCROUTING>; + mpscintr = <&MPSCINTR>; + cell-index = <0>; + interrupts = <40>; + interrupt-parent = <&PIC>; }; - mpsc@9000 { + MPSC1: mpsc@9000 { device_type = "serial"; - compatible = "marvell,mpsc"; - reg = <9000 38>; - virtual-reg = <f1009000>; - sdma = <&/mv64x60/sdma@6000>; - brg = <&/mv64x60/brg@b208>; - cunit = <&/mv64x60/cunit@f200>; - mpscrouting = <&/mv64x60/mpscrouting@b400>; - mpscintr = <&/mv64x60/mpscintr@b800>; - block-index = <1>; - max_idle = <28>; - chr_1 = <0>; - chr_2 = <0>; - chr_10 = <3>; - mpcr = <0>; - interrupts = <2a>; - interrupt-parent = <&/mv64x60/pic>; + compatible = "marvell,mv64360-mpsc"; + reg = <0x9000 0x38>; + virtual-reg = <0xf1009000>; + sdma = <&SDMA1>; + brg = <&BRG1>; + cunit = <&CUNIT>; + mpscrouting = <&MPSCROUTING>; + mpscintr = <&MPSCINTR>; + cell-index = <1>; + interrupts = <42>; + interrupt-parent = <&PIC>; }; wdt@b410 { /* watchdog timer */ - compatible = "marvell,mv64x60-wdt"; - reg = <b410 8>; - timeout = <a>; /* wdt timeout in seconds */ + compatible = "marvell,mv64360-wdt"; + reg = <0xb410 0x8>; }; i2c@c000 { device_type = "i2c"; - compatible = "marvell,mv64x60-i2c"; - reg = <c000 20>; - virtual-reg = <f100c000>; - freq_m = <8>; - freq_n = <3>; - timeout = <3e8>; /* 1000 = 1 second */ - retries = <1>; - interrupts = <25>; - interrupt-parent = <&/mv64x60/pic>; + compatible = "marvell,mv64360-i2c"; + reg = <0xc000 0x20>; + virtual-reg = <0xf100c000>; + interrupts = <37>; + interrupt-parent = <&PIC>; }; - pic { + PIC: pic { #interrupt-cells = <1>; #address-cells = <0>; - compatible = "marvell,mv64x60-pic"; - reg = <0000 88>; + compatible = "marvell,mv64360-pic"; + reg = <0x0 0x88>; interrupt-controller; }; mpp@f000 { - compatible = "marvell,mv64x60-mpp"; - reg = <f000 10>; + compatible = "marvell,mv64360-mpp"; + reg = <0xf000 0x10>; }; gpp@f100 { - compatible = "marvell,mv64x60-gpp"; - reg = <f100 20>; + compatible = "marvell,mv64360-gpp"; + reg = <0xf100 0x20>; }; pci@80000000 { @@ -244,73 +228,75 @@ #size-cells = <2>; #interrupt-cells = <1>; device_type = "pci"; - compatible = "marvell,mv64x60-pci"; - reg = <0cf8 8>; - ranges = <01000000 0 0 88000000 0 01000000 - 02000000 0 80000000 80000000 0 08000000>; - bus-range = <0 ff>; - clock-frequency = <3EF1480>; - interrupt-pci-iack = <0c34>; - interrupt-parent = <&/mv64x60/pic>; - interrupt-map-mask = <f800 0 0 7>; + compatible = "marvell,mv64360-pci"; + reg = <0xcf8 0x8>; + ranges = <0x01000000 0x0 0x0 + 0x88000000 0x0 0x01000000 + 0x02000000 0x0 0x80000000 + 0x80000000 0x0 0x08000000>; + bus-range = <0 255>; + clock-frequency = <66000000>; + interrupt-pci-iack = <0xc34>; + interrupt-parent = <&PIC>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0a */ - 5000 0 0 1 &/mv64x60/pic 50 - 5000 0 0 2 &/mv64x60/pic 51 - 5000 0 0 3 &/mv64x60/pic 5b - 5000 0 0 4 &/mv64x60/pic 5d + 0x5000 0 0 1 &PIC 80 + 0x5000 0 0 2 &PIC 81 + 0x5000 0 0 3 &PIC 91 + 0x5000 0 0 4 &PIC 93 /* IDSEL 0x0b */ - 5800 0 0 1 &/mv64x60/pic 5b - 5800 0 0 2 &/mv64x60/pic 5d - 5800 0 0 3 &/mv64x60/pic 50 - 5800 0 0 4 &/mv64x60/pic 51 + 0x5800 0 0 1 &PIC 91 + 0x5800 0 0 2 &PIC 93 + 0x5800 0 0 3 &PIC 80 + 0x5800 0 0 4 &PIC 81 /* IDSEL 0x0c */ - 6000 0 0 1 &/mv64x60/pic 5b - 6000 0 0 2 &/mv64x60/pic 5d - 6000 0 0 3 &/mv64x60/pic 50 - 6000 0 0 4 &/mv64x60/pic 51 + 0x6000 0 0 1 &PIC 91 + 0x6000 0 0 2 &PIC 93 + 0x6000 0 0 3 &PIC 80 + 0x6000 0 0 4 &PIC 81 /* IDSEL 0x0d */ - 6800 0 0 1 &/mv64x60/pic 5d - 6800 0 0 2 &/mv64x60/pic 50 - 6800 0 0 3 &/mv64x60/pic 51 - 6800 0 0 4 &/mv64x60/pic 5b + 0x6800 0 0 1 &PIC 93 + 0x6800 0 0 2 &PIC 80 + 0x6800 0 0 3 &PIC 81 + 0x6800 0 0 4 &PIC 91 >; }; cpu-error@0070 { - compatible = "marvell,mv64x60-cpu-error"; - reg = <0070 10 0128 28>; - interrupts = <03>; - interrupt-parent = <&/mv64x60/pic>; + compatible = "marvell,mv64360-cpu-error"; + reg = <0x70 0x10 0x128 0x28>; + interrupts = <3>; + interrupt-parent = <&PIC>; }; sram-ctrl@0380 { - compatible = "marvell,mv64x60-sram-ctrl"; - reg = <0380 80>; - interrupts = <0d>; - interrupt-parent = <&/mv64x60/pic>; + compatible = "marvell,mv64360-sram-ctrl"; + reg = <0x380 0x80>; + interrupts = <13>; + interrupt-parent = <&PIC>; }; pci-error@1d40 { - compatible = "marvell,mv64x60-pci-error"; - reg = <1d40 40 0c28 4>; - interrupts = <0c>; - interrupt-parent = <&/mv64x60/pic>; + compatible = "marvell,mv64360-pci-error"; + reg = <0x1d40 0x40 0xc28 0x4>; + interrupts = <12>; + interrupt-parent = <&PIC>; }; mem-ctrl@1400 { - compatible = "marvell,mv64x60-mem-ctrl"; - reg = <1400 60>; - interrupts = <11>; - interrupt-parent = <&/mv64x60/pic>; + compatible = "marvell,mv64360-mem-ctrl"; + reg = <0x1400 0x60>; + interrupts = <17>; + interrupt-parent = <&PIC>; }; }; chosen { bootargs = "ip=on"; - linux,stdout-path = "/mv64x60@f1000000/mpsc@8000"; + linux,stdout-path = &MPSC0; }; }; diff --git a/arch/powerpc/boot/dts/rainier.dts b/arch/powerpc/boot/dts/rainier.dts index f947c75a2e94..6a8fa7089ea2 100644 --- a/arch/powerpc/boot/dts/rainier.dts +++ b/arch/powerpc/boot/dts/rainier.dts @@ -254,7 +254,6 @@ }; EMAC0: ethernet@ef600e00 { - linux,network-index = <0>; device_type = "network"; compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4"; interrupt-parent = <&EMAC0>; @@ -270,7 +269,7 @@ mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; @@ -284,7 +283,6 @@ }; EMAC1: ethernet@ef600f00 { - linux,network-index = <1>; device_type = "network"; compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4"; interrupt-parent = <&EMAC1>; @@ -300,7 +298,7 @@ mal-tx-channel = <1>; mal-rx-channel = <1>; cell-index = <1>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts index 14be38ad5d4b..b86e65d926c1 100644 --- a/arch/powerpc/boot/dts/sbc8548.dts +++ b/arch/powerpc/boot/dts/sbc8548.dts @@ -184,11 +184,17 @@ cell-index = <0>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < - /* IDSEL 0x01 (PCI-X slot) */ - 0x0800 0x0 0x0 0x1 &mpic 0x0 0x1 - 0x0800 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x0800 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x0800 0x0 0x0 0x4 &mpic 0x3 0x1>; + /* IDSEL 0x01 (PCI-X slot) @66MHz */ + 0x0800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x0800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x0800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x0800 0x0 0x0 0x4 &mpic 0x1 0x1 + + /* IDSEL 0x11 (PCI, 3.3V 32bit) @33MHz */ + 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1>; interrupt-parent = <&mpic>; interrupts = <0x18 0x2>; diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/sbc8641d.dts new file mode 100644 index 000000000000..3eebeec157b3 --- /dev/null +++ b/arch/powerpc/boot/dts/sbc8641d.dts @@ -0,0 +1,352 @@ +/* + * SBC8641D Device Tree Source + * + * Copyright 2008 Wind River Systems Inc. + * + * Paul Gortmaker (see MAINTAINERS for contact information) + * + * Based largely on the mpc8641_hpcn.dts by Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "SBC8641D"; + compatible = "wind,sbc8641"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8641@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; // L1 + i-cache-size = <32768>; // L1 + timebase-frequency = <0>; // From uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + }; + PowerPC,8641@1 { + device_type = "cpu"; + reg = <1>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; // From uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; // 512M at 0x0 + }; + + localbus@f8005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8641-localbus", "simple-bus"; + reg = <0xf8005000 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + + ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash + 1 0 0xf0000000 0x00010000 // 64KB EEPROM + 2 0 0xf1000000 0x00100000 // EPLD (1MB) + 3 0 0xe0000000 0x04000000 // 64MB LB SDRAM (CS3) + 4 0 0xe4000000 0x04000000 // 64MB LB SDRAM (CS4) + 6 0 0xf4000000 0x00100000 // LCD display (1MB) + 7 0 0xe8000000 0x04000000>; // 64MB OneNAND + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x01000000>; + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "dtb"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@300000 { + label = "kernel"; + reg = <0x00100000 0x00400000>; + read-only; + }; + partition@400000 { + label = "fs"; + reg = <0x00500000 0x00a00000>; + }; + partition@700000 { + label = "firmware"; + reg = <0x00f00000 0x00100000>; + read-only; + }; + }; + + epld@2,0 { + compatible = "wrs,epld-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <2 0 0x100000>; + ranges = <0 0 5 0 1 // User switches + 1 0 5 1 1 // Board ID/Rev + 3 0 5 3 1>; // LEDs + }; + }; + + soc@f8000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x00000000 0xf8000000 0x00100000>; + reg = <0xf8000000 0x00001000>; // CCSRBAR + bus-frequency = <0>; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + + phy0: ethernet-phy@1f { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <0x1f>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <0>; + device_type = "ethernet-phy"; + }; + phy2: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <2>; + device_type = "ethernet-phy"; + }; + }; + + enet0: ethernet@24000 { + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@25000 { + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + enet2: ethernet@26000 { + cell-index = <2>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 32 2 33 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy2>; + phy-connection-type = "rgmii-id"; + }; + + enet3: ethernet@27000 { + cell-index = <3>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x27000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <37 2 38 2 39 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy3>; + phy-connection-type = "rgmii-id"; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <28 2>; + interrupt-parent = <&mpic>; + }; + + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + + global-utilities@e0000 { + compatible = "fsl,mpc8641-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + }; + + pci0: pcie@f8008000 { + cell-index = <0>; + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf8008000 0x1000>; + bus-range = <0x0 0xff>; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <24 2>; + interrupt-map-mask = <0xff00 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x0000 0 0 1 &mpic 0 1 + 0x0000 0 0 2 &mpic 1 1 + 0x0000 0 0 3 &mpic 2 1 + 0x0000 0 0 4 &mpic 3 1 + >; + + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0x80000000 + 0x02000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00100000>; + }; + + }; + + pci1: pcie@f8009000 { + cell-index = <1>; + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf8009000 0x1000>; + bus-range = <0 0xff>; + ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <25 2>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x0000 0 0 1 &mpic 4 1 + 0x0000 0 0 2 &mpic 5 1 + 0x0000 0 0 3 &mpic 6 1 + 0x0000 0 0 4 &mpic 7 1 + >; + + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0xa0000000 + 0x02000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00100000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts index 8db9515d7dc3..a1ae4d6ec990 100644 --- a/arch/powerpc/boot/dts/sequoia.dts +++ b/arch/powerpc/boot/dts/sequoia.dts @@ -269,7 +269,6 @@ }; EMAC0: ethernet@ef600e00 { - linux,network-index = <0>; device_type = "network"; compatible = "ibm,emac-440epx", "ibm,emac4"; interrupt-parent = <&EMAC0>; @@ -285,7 +284,7 @@ mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; @@ -299,7 +298,6 @@ }; EMAC1: ethernet@ef600f00 { - linux,network-index = <1>; device_type = "network"; compatible = "ibm,emac-440epx", "ibm,emac4"; interrupt-parent = <&EMAC1>; @@ -315,7 +313,7 @@ mal-tx-channel = <1>; mal-rx-channel = <1>; cell-index = <1>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; diff --git a/arch/powerpc/boot/dts/taishan.dts b/arch/powerpc/boot/dts/taishan.dts index 8278068c802c..e808e1c5593a 100644 --- a/arch/powerpc/boot/dts/taishan.dts +++ b/arch/powerpc/boot/dts/taishan.dts @@ -104,6 +104,16 @@ // FIXME: anything else? }; + L2C0: l2c { + compatible = "ibm,l2-cache-440gx", "ibm,l2-cache"; + dcr-reg = <20 8 /* Internal SRAM DCR's */ + 30 8>; /* L2 cache DCR's */ + cache-line-size = <20>; /* 32 bytes */ + cache-size = <40000>; /* L2, 256K */ + interrupt-parent = <&UIC2>; + interrupts = <17 1>; + }; + plb { compatible = "ibm,plb-440gx", "ibm,plb4"; #address-cells = <2>; @@ -232,10 +242,18 @@ reg = <40000790 8>; }; + TAH0: emac-tah@40000b50 { + compatible = "ibm,tah-440gx", "ibm,tah"; + reg = <40000b50 30>; + }; + + TAH1: emac-tah@40000d50 { + compatible = "ibm,tah-440gx", "ibm,tah"; + reg = <40000d50 30>; + }; EMAC0: ethernet@40000800 { unused = <1>; - linux,network-index = <2>; device_type = "network"; compatible = "ibm,emac-440gx", "ibm,emac4"; interrupt-parent = <&UIC1>; @@ -256,7 +274,6 @@ }; EMAC1: ethernet@40000900 { unused = <1>; - linux,network-index = <3>; device_type = "network"; compatible = "ibm,emac-440gx", "ibm,emac4"; interrupt-parent = <&UIC1>; @@ -277,7 +294,6 @@ }; EMAC2: ethernet@40000c00 { - linux,network-index = <0>; device_type = "network"; compatible = "ibm,emac-440gx", "ibm,emac4"; interrupt-parent = <&UIC2>; @@ -288,7 +304,7 @@ mal-tx-channel = <2>; mal-rx-channel = <2>; cell-index = <2>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; @@ -297,10 +313,11 @@ rgmii-channel = <0>; zmii-device = <&ZMII0>; zmii-channel = <2>; + tah-device = <&TAH0>; + tah-channel = <0>; }; EMAC3: ethernet@40000e00 { - linux,network-index = <1>; device_type = "network"; compatible = "ibm,emac-440gx", "ibm,emac4"; interrupt-parent = <&UIC2>; @@ -311,7 +328,7 @@ mal-tx-channel = <3>; mal-rx-channel = <3>; cell-index = <3>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; @@ -320,6 +337,8 @@ rgmii-channel = <1>; zmii-device = <&ZMII0>; zmii-channel = <3>; + tah-device = <&TAH1>; + tah-channel = <0>; }; diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts index c86464f007da..65bcea6a0173 100644 --- a/arch/powerpc/boot/dts/tqm5200.dts +++ b/arch/powerpc/boot/dts/tqm5200.dts @@ -127,10 +127,25 @@ ethernet@3000 { device_type = "network"; compatible = "fsl,mpc5200-fec"; - reg = <3000 800>; + reg = <3000 400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <3000 400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + interrupt-parent = <&mpc5200_pic>; + + phy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; }; ata@3a00 { @@ -141,11 +156,19 @@ }; i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; compatible = "fsl,mpc5200-i2c","fsl-i2c"; reg = <3d40 40>; interrupts = <2 10 0>; interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; + + rtc@68 { + device_type = "rtc"; + compatible = "dallas,ds1307"; + reg = <68>; + }; }; sram@8000 { @@ -154,6 +177,23 @@ }; }; + lpb { + model = "fsl,lpb"; + compatible = "fsl,lpb"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 fc000000 02000000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 02000000>; + bank-width = <4>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; + }; + pci@f0000d00 { #interrupt-cells = <1>; #size-cells = <2>; diff --git a/arch/powerpc/boot/dts/walnut.dts b/arch/powerpc/boot/dts/walnut.dts index dcc21b0438e5..a328607c8f84 100644 --- a/arch/powerpc/boot/dts/walnut.dts +++ b/arch/powerpc/boot/dts/walnut.dts @@ -125,7 +125,6 @@ }; EMAC: ethernet@ef600800 { - linux,network-index = <0>; device_type = "network"; compatible = "ibm,emac-405gp", "ibm,emac"; interrupt-parent = <&UIC0>; diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts index dc1499d30f43..b04a52e22bf5 100644 --- a/arch/powerpc/boot/dts/warp.dts +++ b/arch/powerpc/boot/dts/warp.dts @@ -204,7 +204,6 @@ }; EMAC0: ethernet@ef600e00 { - linux,network-index = <0>; device_type = "network"; compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; interrupt-parent = <&UIC1>; diff --git a/arch/powerpc/boot/dts/yosemite.dts b/arch/powerpc/boot/dts/yosemite.dts new file mode 100644 index 000000000000..0d6d332814e0 --- /dev/null +++ b/arch/powerpc/boot/dts/yosemite.dts @@ -0,0 +1,304 @@ +/* + * Device Tree Source for AMCC Yosemite + * + * Copyright 2008 IBM Corp. + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,yosemite"; + compatible = "amcc,yosemite","amcc,bamboo"; + dcr-parent = <&/cpus/cpu@0>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + serial2 = &UART2; + serial3 = &UART3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440EP"; + reg = <0>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <20>; + d-cache-line-size = <20>; + i-cache-size = <8000>; + d-cache-size = <8000>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440ep","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440ep","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0d0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1e 4 1f 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-440ep"; + dcr-reg = <00e 002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-440ep"; + dcr-reg = <00c 002>; + }; + + plb { + compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: sdram { + compatible = "ibm,sdram-440ep", "ibm,sdram-405gp"; + dcr-reg = <010 2>; + }; + + DMA0: dma { + compatible = "ibm,dma-440ep", "ibm,dma-440gp"; + dcr-reg = <100 027>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal"; + dcr-reg = <180 62>; + num-tx-chans = <4>; + num-rx-chans = <2>; + interrupt-parent = <&MAL0>; + interrupts = <0 1 2 3 4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0 &UIC0 a 4 + /*RXEOB*/ 1 &UIC0 b 4 + /*SERR*/ 2 &UIC1 0 4 + /*TXDE*/ 3 &UIC1 1 4 + /*RXDE*/ 4 &UIC1 2 4>; + }; + + POB0: opb { + compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + /* Bamboo is oddball in the 44x world and doesn't use the ERPN + * bits. + */ + ranges = <00000000 0 00000000 80000000 + 80000000 0 80000000 80000000>; + interrupt-parent = <&UIC1>; + interrupts = <7 4>; + clock-frequency = <0>; /* Filled in by zImage */ + + EBC0: ebc { + compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by zImage */ + interrupts = <5 1>; + interrupt-parent = <&UIC1>; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600300 8>; + virtual-reg = <ef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <1c200>; + interrupt-parent = <&UIC0>; + interrupts = <0 4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600400 8>; + virtual-reg = <ef600400>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + UART2: serial@ef600500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600500 8>; + virtual-reg = <ef600500>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <3 4>; + status = "disabled"; + }; + + UART3: serial@ef600600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600600 8>; + virtual-reg = <ef600600>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <4 4>; + status = "disabled"; + }; + + IIC0: i2c@ef600700 { + compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; + reg = <ef600700 14>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + + IIC1: i2c@ef600800 { + compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; + reg = <ef600800 14>; + interrupt-parent = <&UIC0>; + interrupts = <7 4>; + }; + + spi@ef600900 { + compatible = "amcc,spi-440ep"; + reg = <ef600900 6>; + interrupts = <8 4>; + interrupt-parent = <&UIC0>; + }; + + ZMII0: emac-zmii@ef600d00 { + compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii"; + reg = <ef600d00 c>; + }; + + EMAC0: ethernet@ef600e00 { + device_type = "network"; + compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <1c 4 1d 4>; + reg = <ef600e00 70>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <0 1>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rmii"; + phy-map = <00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + }; + + EMAC1: ethernet@ef600f00 { + device_type = "network"; + compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <1e 4 1f 4>; + reg = <ef600f00 70>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <2 3>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rmii"; + phy-map = <00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <1>; + }; + + usb@ef601000 { + compatible = "ohci-be"; + reg = <ef601000 80>; + interrupts = <8 4 9 4>; + interrupt-parent = < &UIC1 >; + }; + }; + + PCI0: pci@ec000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb440ep-pci", "ibm,plb-pci"; + primary; + reg = <0 eec00000 8 /* Config space access */ + 0 eed00000 4 /* IACK */ + 0 eed00000 4 /* Special cycle */ + 0 ef400000 40>; /* Internal registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed. Chip supports a second + * IO range but we don't use it for now + */ + ranges = <02000000 0 a0000000 0 a0000000 0 20000000 + 01000000 0 00000000 0 e8000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* Bamboo has all 4 IRQ pins tied together per slot */ + interrupt-map-mask = <f800 0 0 0>; + interrupt-map = < + /* IDSEL 1 */ + 0800 0 0 0 &UIC0 1c 8 + + /* IDSEL 2 */ + 1000 0 0 0 &UIC0 1b 8 + + /* IDSEL 3 */ + 1800 0 0 0 &UIC0 1a 8 + + /* IDSEL 4 */ + 2000 0 0 0 &UIC0 19 8 + >; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600300"; + }; +}; diff --git a/arch/powerpc/boot/ebony.c b/arch/powerpc/boot/ebony.c index f61364c47a76..5532ab3221dd 100644 --- a/arch/powerpc/boot/ebony.c +++ b/arch/powerpc/boot/ebony.c @@ -75,7 +75,8 @@ static void ebony_fixups(void) ibm440gp_fixup_clocks(sysclk, 6 * 1843200); ibm4xx_sdram_fixup_memsize(); - dt_fixup_mac_addresses(ebony_mac0, ebony_mac1); + dt_fixup_mac_address_by_alias("ethernet0", ebony_mac0); + dt_fixup_mac_address_by_alias("ethernet1", ebony_mac1); ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); ebony_flashsel_fixup(); } diff --git a/arch/powerpc/boot/libfdt-wrapper.c b/arch/powerpc/boot/libfdt-wrapper.c index 59016bef1391..c541fd8a95d4 100644 --- a/arch/powerpc/boot/libfdt-wrapper.c +++ b/arch/powerpc/boot/libfdt-wrapper.c @@ -35,7 +35,7 @@ #define check_err(err) \ ({ \ if (BAD_ERROR(err) || ((err < 0) && DEBUG)) \ - printf("%s():%d %s\n\r", __FUNCTION__, __LINE__, \ + printf("%s():%d %s\n\r", __func__, __LINE__, \ fdt_strerror(err)); \ if (BAD_ERROR(err)) \ exit(); \ diff --git a/arch/powerpc/boot/mpc52xx-psc.c b/arch/powerpc/boot/mpc52xx-psc.c index 1074626e6a37..d4cb4e4e0938 100644 --- a/arch/powerpc/boot/mpc52xx-psc.c +++ b/arch/powerpc/boot/mpc52xx-psc.c @@ -51,14 +51,9 @@ static unsigned char psc_getc(void) int mpc5200_psc_console_init(void *devp, struct serial_console_data *scdp) { - int n; - /* Get the base address of the psc registers */ - n = getprop(devp, "virtual-reg", &psc, sizeof(psc)); - if (n != sizeof(psc)) { - if (!dt_xlate_reg(devp, 0, (void *)&psc, NULL)) - return -1; - } + if (dt_get_virtual_reg(devp, &psc, 1) < 1) + return -1; scdp->open = psc_open; scdp->putc = psc_putc; diff --git a/arch/powerpc/boot/mpsc.c b/arch/powerpc/boot/mpsc.c index 802ea53790d8..425ad88cce8d 100644 --- a/arch/powerpc/boot/mpsc.c +++ b/arch/powerpc/boot/mpsc.c @@ -141,7 +141,7 @@ int mpsc_console_init(void *devp, struct serial_console_data *scdp) if (mpscintr_base == NULL) goto err_out; - n = getprop(devp, "block-index", &v, sizeof(v)); + n = getprop(devp, "cell-index", &v, sizeof(v)); if (n != sizeof(v)) goto err_out; reg_set = (int)v; diff --git a/arch/powerpc/boot/mv64x60.c b/arch/powerpc/boot/mv64x60.c index b43259455d4b..d9bb302b91d2 100644 --- a/arch/powerpc/boot/mv64x60.c +++ b/arch/powerpc/boot/mv64x60.c @@ -535,7 +535,7 @@ u8 *mv64x60_get_bridge_pbase(void) u32 v[2]; void *devp; - devp = finddevice("/mv64x60"); + devp = find_node_by_compatible(NULL, "marvell,mv64360"); if (devp == NULL) goto err_out; if (getprop(devp, "reg", v, sizeof(v)) != sizeof(v)) @@ -553,7 +553,7 @@ u8 *mv64x60_get_bridge_base(void) u32 v; void *devp; - devp = finddevice("/mv64x60"); + devp = find_node_by_compatible(NULL, "marvell,mv64360"); if (devp == NULL) goto err_out; if (getprop(devp, "virtual-reg", &v, sizeof(v)) != sizeof(v)) diff --git a/arch/powerpc/boot/mv64x60_i2c.c b/arch/powerpc/boot/mv64x60_i2c.c index d085377be3bc..52a3212b6638 100644 --- a/arch/powerpc/boot/mv64x60_i2c.c +++ b/arch/powerpc/boot/mv64x60_i2c.c @@ -185,7 +185,7 @@ int mv64x60_i2c_open(void) u32 v; void *devp; - devp = finddevice("/mv64x60/i2c"); + devp = find_node_by_compatible(NULL, "marvell,mv64360-i2c"); if (devp == NULL) goto err_out; if (getprop(devp, "virtual-reg", &v, sizeof(v)) != sizeof(v)) diff --git a/arch/powerpc/boot/ns16550.c b/arch/powerpc/boot/ns16550.c index f8f1b2f31412..8c9ead94be06 100644 --- a/arch/powerpc/boot/ns16550.c +++ b/arch/powerpc/boot/ns16550.c @@ -55,15 +55,14 @@ static u8 ns16550_tstc(void) int ns16550_console_init(void *devp, struct serial_console_data *scdp) { int n; - unsigned long reg_phys; + u32 reg_offset; - n = getprop(devp, "virtual-reg", ®_base, sizeof(reg_base)); - if (n != sizeof(reg_base)) { - if (!dt_xlate_reg(devp, 0, ®_phys, NULL)) - return -1; + if (dt_get_virtual_reg(devp, (void **)®_base, 1) < 1) + return -1; - reg_base = (void *)reg_phys; - } + n = getprop(devp, "reg-offset", ®_offset, sizeof(reg_offset)); + if (n == sizeof(reg_offset)) + reg_base += reg_offset; n = getprop(devp, "reg-shift", ®_shift, sizeof(reg_shift)); if (n != sizeof(reg_shift)) diff --git a/arch/powerpc/boot/ops.h b/arch/powerpc/boot/ops.h index 4b0544b03c64..321e2f5afe71 100644 --- a/arch/powerpc/boot/ops.h +++ b/arch/powerpc/boot/ops.h @@ -95,6 +95,7 @@ int dt_xlate_reg(void *node, int res, unsigned long *addr, unsigned long *size); int dt_xlate_addr(void *node, u32 *buf, int buflen, unsigned long *xlated_addr); int dt_is_compatible(void *node, const char *compat); void dt_get_reg_format(void *node, u32 *naddr, u32 *nsize); +int dt_get_virtual_reg(void *node, void **addr, int nres); static inline void *finddevice(const char *name) { diff --git a/arch/powerpc/boot/prpmc2800.c b/arch/powerpc/boot/prpmc2800.c index 05c3245b30d7..da31d6030482 100644 --- a/arch/powerpc/boot/prpmc2800.c +++ b/arch/powerpc/boot/prpmc2800.c @@ -344,20 +344,20 @@ static void prpmc2800_bridge_setup(u32 mem_size) acc_bits); /* Get the cpu -> pci i/o & mem mappings from the device tree */ - devp = finddevice("/mv64x60/pci@80000000"); + devp = find_node_by_compatible(NULL, "marvell,mv64360-pci"); if (devp == NULL) - fatal("Error: Missing /mv64x60/pci@80000000" + fatal("Error: Missing marvell,mv64360-pci" " device tree node\n\r"); rc = getprop(devp, "ranges", v, sizeof(v)); if (rc != sizeof(v)) - fatal("Error: Can't find /mv64x60/pci@80000000/ranges" + fatal("Error: Can't find marvell,mv64360-pci ranges" " property\n\r"); /* Get the cpu -> pci i/o & mem mappings from the device tree */ - devp = finddevice("/mv64x60"); + devp = find_node_by_compatible(NULL, "marvell,mv64360"); if (devp == NULL) - fatal("Error: Missing /mv64x60 device tree node\n\r"); + fatal("Error: Missing marvell,mv64360 device tree node\n\r"); enables = in_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE)); enables |= 0x0007fe00; /* Disable all cpu->pci windows */ @@ -429,9 +429,9 @@ static void prpmc2800_fixups(void) setprop(devp, "model", model, l); /* Set /cpus/PowerPC,7447/clock-frequency */ - devp = finddevice("/cpus/PowerPC,7447"); + devp = find_node_by_prop_value_str(NULL, "device_type", "cpu"); if (devp == NULL) - fatal("Error: Missing proper /cpus device tree node\n\r"); + fatal("Error: Missing proper cpu device tree node\n\r"); v[0] = bip->core_speed; setprop(devp, "clock-frequency", &v[0], sizeof(v[0])); @@ -443,16 +443,17 @@ static void prpmc2800_fixups(void) v[1] = bip->mem_size; setprop(devp, "reg", v, sizeof(v)); - /* Update /mv64x60/model, if this is a mv64362 */ + /* Update model, if this is a mv64362 */ if (bip->bridge_type == BRIDGE_TYPE_MV64362) { - devp = finddevice("/mv64x60"); + devp = find_node_by_compatible(NULL, "marvell,mv64360"); if (devp == NULL) - fatal("Error: Missing /mv64x60 device tree node\n\r"); + fatal("Error: Missing marvell,mv64360" + " device tree node\n\r"); setprop(devp, "model", "mv64362", strlen("mv64362") + 1); } /* Set User FLASH size */ - devp = finddevice("/mv64x60/flash@a0000000"); + devp = find_node_by_compatible(NULL, "direct-mapped"); if (devp == NULL) fatal("Error: Missing User FLASH device tree node\n\r"); rc = getprop(devp, "reg", v, sizeof(v)); diff --git a/arch/powerpc/boot/ps3-head.S b/arch/powerpc/boot/ps3-head.S index a55c2735f759..b6fcbaf5027b 100644 --- a/arch/powerpc/boot/ps3-head.S +++ b/arch/powerpc/boot/ps3-head.S @@ -27,8 +27,9 @@ /* * __system_reset_overlay - The PS3 first stage entry. * - * The bootwraper build script copies the 0x100 bytes at symbol - * __system_reset_overlay to offset 0x100 of the rom image. + * The bootwraper build script copies the 512 bytes at symbol + * __system_reset_overlay to offset 0x100 of the rom image. This symbol + * must occupy 512 or less bytes. * * The PS3 has a single processor with two threads. */ @@ -47,8 +48,6 @@ __system_reset_overlay: mfspr r3, 0x88 cntlzw. r3, r3 - li r4, 0 - li r5, 0 beq 1f /* Secondary goes to __secondary_hold in kernel. */ @@ -57,8 +56,14 @@ __system_reset_overlay: mtctr r4 bctr - /* Primary delays then goes to _zimage_start in wrapper. */ 1: + /* Save the value at addr zero for a null pointer write check later. */ + + li r4, 0 + lwz r3, 0(r4) + + /* Primary delays then goes to _zimage_start in wrapper. */ + or 31, 31, 31 /* db16cyc */ or 31, 31, 31 /* db16cyc */ @@ -67,16 +72,18 @@ __system_reset_overlay: mtctr r4 bctr + . = __system_reset_overlay + 512 + /* * __system_reset_kernel - Place holder for the kernel reset vector. * - * The bootwrapper build script copies 0x100 bytes from offset 0x100 + * The bootwrapper build script copies 512 bytes from offset 0x100 * of the rom image to the symbol __system_reset_kernel. At runtime - * the bootwrapper program copies the 0x100 bytes at __system_reset_kernel - * to ram address 0x100. This symbol must occupy 0x100 bytes. + * the bootwrapper program copies the 512 bytes at __system_reset_kernel + * to ram address 0x100. This symbol must occupy 512 bytes. */ .globl __system_reset_kernel __system_reset_kernel: - . = __system_reset_kernel + 0x100 + . = __system_reset_kernel + 512 diff --git a/arch/powerpc/boot/ps3.c b/arch/powerpc/boot/ps3.c index 3b0ac4d006ec..9954d98871d0 100644 --- a/arch/powerpc/boot/ps3.c +++ b/arch/powerpc/boot/ps3.c @@ -27,10 +27,10 @@ #include "page.h" #include "ops.h" -extern s64 lv1_panic(u64 in_1); -extern s64 lv1_get_logical_partition_id(u64 *out_1); -extern s64 lv1_get_logical_ppe_id(u64 *out_1); -extern s64 lv1_get_repository_node_value(u64 in_1, u64 in_2, u64 in_3, +extern int lv1_panic(u64 in_1); +extern int lv1_get_logical_partition_id(u64 *out_1); +extern int lv1_get_logical_ppe_id(u64 *out_1); +extern int lv1_get_repository_node_value(u64 in_1, u64 in_2, u64 in_3, u64 in_4, u64 in_5, u64 *out_1, u64 *out_2); #ifdef DEBUG @@ -46,6 +46,7 @@ BSS_STACK(4096); * edit the command line passed to vmlinux (by setting /chosen/bootargs). * The buffer is put in it's own section so that tools may locate it easier. */ + static char cmdline[COMMAND_LINE_SIZE] __attribute__((__section__("__builtin_cmdline"))); @@ -75,7 +76,7 @@ static void ps3_exit(void) static int ps3_repository_read_rm_size(u64 *rm_size) { - s64 result; + int result; u64 lpar_id; u64 ppe_id; u64 v2; @@ -114,16 +115,17 @@ void ps3_copy_vectors(void) { extern char __system_reset_kernel[]; - memcpy((void *)0x100, __system_reset_kernel, 0x100); - flush_cache((void *)0x100, 0x100); + memcpy((void *)0x100, __system_reset_kernel, 512); + flush_cache((void *)0x100, 512); } -void platform_init(void) +void platform_init(unsigned long null_check) { const u32 heapsize = 0x1000000 - (u32)_end; /* 16MiB */ void *chosen; unsigned long ft_addr; u64 rm_size; + unsigned long val; console_ops.write = ps3_console_write; platform_ops.exit = ps3_exit; @@ -151,6 +153,11 @@ void platform_init(void) printf(" flat tree at 0x%lx\n\r", ft_addr); + val = *(unsigned long *)0; + + if (val != null_check) + printf("null check failed: %lx != %lx\n\r", val, null_check); + ((kernel_entry_t)0)(ft_addr, 0, NULL); ps3_exit(); diff --git a/arch/powerpc/boot/serial.c b/arch/powerpc/boot/serial.c index 9960421eb6b9..8b3607cb53fb 100644 --- a/arch/powerpc/boot/serial.c +++ b/arch/powerpc/boot/serial.c @@ -119,7 +119,7 @@ int serial_console_init(void) if (dt_is_compatible(devp, "ns16550")) rc = ns16550_console_init(devp, &serial_cd); - else if (dt_is_compatible(devp, "marvell,mpsc")) + else if (dt_is_compatible(devp, "marvell,mv64360-mpsc")) rc = mpsc_console_init(devp, &serial_cd); else if (dt_is_compatible(devp, "fsl,cpm1-scc-uart") || dt_is_compatible(devp, "fsl,cpm1-smc-uart") || diff --git a/arch/powerpc/boot/simpleboot.c b/arch/powerpc/boot/simpleboot.c new file mode 100644 index 000000000000..86cd285bccc6 --- /dev/null +++ b/arch/powerpc/boot/simpleboot.c @@ -0,0 +1,84 @@ +/* + * The simple platform -- for booting when firmware doesn't supply a device + * tree or any platform configuration information. + * All data is extracted from an embedded device tree + * blob. + * + * Authors: Scott Wood <scottwood@freescale.com> + * Grant Likely <grant.likely@secretlab.ca> + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * Copyright (c) 2008 Secret Lab Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "types.h" +#include "io.h" +#include "stdio.h" +#include "libfdt/libfdt.h" + +BSS_STACK(4*1024); + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + const u32 *na, *ns, *reg, *timebase; + u64 memsize64; + int node, size, i; + + /* Make sure FDT blob is sane */ + if (fdt_check_header(_dtb_start) != 0) + fatal("Invalid device tree blob\n"); + + /* Find the #address-cells and #size-cells properties */ + node = fdt_path_offset(_dtb_start, "/"); + if (node < 0) + fatal("Cannot find root node\n"); + na = fdt_getprop(_dtb_start, node, "#address-cells", &size); + if (!na || (size != 4)) + fatal("Cannot find #address-cells property"); + ns = fdt_getprop(_dtb_start, node, "#size-cells", &size); + if (!ns || (size != 4)) + fatal("Cannot find #size-cells property"); + + /* Find the memory range */ + node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type", + "memory", sizeof("memory")); + if (node < 0) + fatal("Cannot find memory node\n"); + reg = fdt_getprop(_dtb_start, node, "reg", &size); + if (size < (*na+*ns) * sizeof(u32)) + fatal("cannot get memory range\n"); + + /* Only interested in memory based at 0 */ + for (i = 0; i < *na; i++) + if (*reg++ != 0) + fatal("Memory range is not based at address 0\n"); + + /* get the memsize and trucate it to under 4G on 32 bit machines */ + memsize64 = 0; + for (i = 0; i < *ns; i++) + memsize64 = (memsize64 << 32) | *reg++; + if (sizeof(void *) == 4 && memsize64 >= 0x100000000ULL) + memsize64 = 0xffffffff; + + /* finally, setup the timebase */ + node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type", + "cpu", sizeof("cpu")); + if (!node) + fatal("Cannot find cpu node\n"); + timebase = fdt_getprop(_dtb_start, node, "timebase-frequency", &size); + if (timebase && (size == 4)) + timebase_period_ns = 1000000000 / *timebase; + + /* Now we have the memory size; initialize the heap */ + simple_alloc_init(_end, memsize64 - (unsigned long)_end, 32, 64); + + /* prepare the device tree and find the console */ + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/treeboot-walnut.c b/arch/powerpc/boot/treeboot-walnut.c index 472e36605a52..097974e59fac 100644 --- a/arch/powerpc/boot/treeboot-walnut.c +++ b/arch/powerpc/boot/treeboot-walnut.c @@ -68,7 +68,7 @@ static void walnut_fixups(void) ibm4xx_quiesce_eth((u32 *)0xef600800, NULL); ibm4xx_fixup_ebc_ranges("/plb/ebc"); walnut_flashsel_fixup(); - dt_fixup_mac_addresses((u8 *) WALNUT_OPENBIOS_MAC_OFF); + dt_fixup_mac_address_by_alias("ethernet0", (u8 *) WALNUT_OPENBIOS_MAC_OFF); } void platform_init(void) diff --git a/arch/powerpc/boot/virtex405-head.S b/arch/powerpc/boot/virtex405-head.S new file mode 100644 index 000000000000..3edb13f94669 --- /dev/null +++ b/arch/powerpc/boot/virtex405-head.S @@ -0,0 +1,30 @@ +#include "ppc_asm.h" + + .text + .global _zimage_start +_zimage_start: + + /* PPC errata 213: needed by Virtex-4 FX */ + mfccr0 0 + oris 0,0,0x50000000@h + mtccr0 0 + + /* + * Invalidate the data cache if the data cache is turned off. + * - The 405 core does not invalidate the data cache on power-up + * or reset but does turn off the data cache. We cannot assume + * that the cache contents are valid. + * - If the data cache is turned on this must have been done by + * a bootloader and we assume that the cache contents are + * valid. + */ + mfdccr r9 + cmplwi r9,0 + bne 2f + lis r9,0 + li r8,256 + mtctr r8 +1: dccci r0,r9 + addi r9,r9,0x20 + bdnz 1b +2: b _zimage_start_lib diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index c3178155311b..d6c96d9ab291 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -174,10 +174,10 @@ cuboot*) *-mpc83*) platformo=$object/cuboot-83xx.o ;; - *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555*) + *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555|*-ksi8560*) platformo=$object/cuboot-85xx-cpm2.o ;; - *-mpc85*) + *-mpc85*|*-tqm8540|*-sbc85*) platformo=$object/cuboot-85xx.o ;; esac @@ -191,10 +191,18 @@ ps3) ksection=.kernel:vmlinux.bin isection=.kernel:initrd ;; -ep88xc|ep405|redboot*|ep8248e) +ep88xc|ep405|ep8248e) platformo="$object/fixed-head.o $object/$platform.o" binary=y ;; +adder875-redboot) + platformo="$object/fixed-head.o $object/redboot-8xx.o" + binary=y + ;; +simpleboot-virtex405-*) + platformo="$object/virtex405-head.o $object/simpleboot.o" + binary=y + ;; esac vmz="$tmpdir/`basename \"$kernel\"`.$ext" @@ -222,10 +230,13 @@ if [ -n "$version" ]; then uboot_version="-n Linux-$version" fi +# physical offset of kernel image +membase=`${CROSS}objdump -p "$kernel" | grep -m 1 LOAD | awk '{print $7}'` + case "$platform" in uboot) rm -f "$ofile" - mkimage -A ppc -O linux -T kernel -C gzip -a 00000000 -e 00000000 \ + mkimage -A ppc -O linux -T kernel -C gzip -a $membase -e $membase \ $uboot_version -d "$vmz" "$ofile" if [ -z "$cacheit" ]; then rm -f "$vmz" @@ -294,15 +305,16 @@ treeboot*) exit 0 ;; ps3) - # The ps3's loader supports loading gzipped binary images from flash - # rom to addr zero. The loader enters the image at addr 0x100. A - # bootwrapper overlay is use to arrange for the kernel to be loaded - # to addr zero and to have a suitable bootwrapper entry at 0x100. - # To construct the rom image, 0x100 bytes from offset 0x100 in the - # kernel is copied to the bootwrapper symbol __system_reset_kernel. - # The 0x100 bytes at the bootwrapper symbol __system_reset_overlay is - # then copied to offset 0x100. At runtime the bootwrapper program - # copies the 0x100 bytes at __system_reset_kernel to addr 0x100. + # The ps3's loader supports loading a gzipped binary image from flash + # rom to ram addr zero. The loader then enters the system reset + # vector at addr 0x100. A bootwrapper overlay is used to arrange for + # a binary image of the kernel to be at addr zero, and yet have a + # suitable bootwrapper entry at 0x100. To construct the final rom + # image 512 bytes from offset 0x100 is copied to the bootwrapper + # place holder at symbol __system_reset_kernel. The 512 bytes of the + # bootwrapper entry code at symbol __system_reset_overlay is then + # copied to offset 0x100. At runtime the bootwrapper program copies + # the data at __system_reset_kernel back to addr 0x100. system_reset_overlay=0x`${CROSS}nm "$ofile" \ | grep ' __system_reset_overlay$' \ @@ -313,7 +325,7 @@ ps3) | cut -d' ' -f1` system_reset_kernel=`printf "%d" $system_reset_kernel` overlay_dest="256" - overlay_size="256" + overlay_size="512" ${CROSS}objcopy -O binary "$ofile" "$ofile.bin" diff --git a/arch/powerpc/configs/ep405_defconfig b/arch/powerpc/configs/40x/ep405_defconfig index e24240a9a047..e24240a9a047 100644 --- a/arch/powerpc/configs/ep405_defconfig +++ b/arch/powerpc/configs/40x/ep405_defconfig diff --git a/arch/powerpc/configs/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig index 2f475391f1d1..2f475391f1d1 100644 --- a/arch/powerpc/configs/kilauea_defconfig +++ b/arch/powerpc/configs/40x/kilauea_defconfig diff --git a/arch/powerpc/configs/makalu_defconfig b/arch/powerpc/configs/40x/makalu_defconfig index 9ef4d8a312c8..9ef4d8a312c8 100644 --- a/arch/powerpc/configs/makalu_defconfig +++ b/arch/powerpc/configs/40x/makalu_defconfig diff --git a/arch/powerpc/configs/walnut_defconfig b/arch/powerpc/configs/40x/walnut_defconfig index 3b2689e5002a..3b2689e5002a 100644 --- a/arch/powerpc/configs/walnut_defconfig +++ b/arch/powerpc/configs/40x/walnut_defconfig diff --git a/arch/powerpc/configs/bamboo_defconfig b/arch/powerpc/configs/44x/bamboo_defconfig index c44db554cdc6..c44db554cdc6 100644 --- a/arch/powerpc/configs/bamboo_defconfig +++ b/arch/powerpc/configs/44x/bamboo_defconfig diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig new file mode 100644 index 000000000000..a3b763c45ec6 --- /dev/null +++ b/arch/powerpc/configs/44x/canyonlands_defconfig @@ -0,0 +1,721 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.25-rc1 +# Thu Feb 21 14:29:28 2008 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_6xx is not set +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +CONFIG_44x=y +# CONFIG_E200 is not set +CONFIG_PPC_FPU=y +CONFIG_4xx=y +CONFIG_BOOKE=y +CONFIG_PTE_64BIT=y +CONFIG_PHYS_64BIT=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_PPC_DCR_NATIVE=y +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_DCR=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_FAIR_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +# CONFIG_LOGBUFFER is not set +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_PPC4xx_PCI_EXPRESS=y + +# +# Platform support +# +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +# CONFIG_BAMBOO is not set +# CONFIG_EBONY is not set +# CONFIG_SEQUOIA is not set +# CONFIG_TAISHAN is not set +# CONFIG_KATMAI is not set +# CONFIG_RAINIER is not set +# CONFIG_WARP is not set +CONFIG_CANYONLANDS=y +CONFIG_460EX=y +# CONFIG_IPIC is not set +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_FSL_ULI1575 is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_RCU_TRACE=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_MATH_EMULATION is not set +# CONFIG_IOMMU_HELPER is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_PROC_DEVICETREE=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="" +CONFIG_SECCOMP=y +CONFIG_WANT_DEVICE_TREE=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x01000000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +# CONFIG_MTD is not set +CONFIG_OF_DEVICE=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=35000 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_XILINX_SYSACE is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_IBM_NEW_EMAC=y +CONFIG_IBM_NEW_EMAC_RXB=256 +CONFIG_IBM_NEW_EMAC_TXB=256 +CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32 +CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256 +CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0 +# CONFIG_IBM_NEW_EMAC_DEBUG is not set +CONFIG_IBM_NEW_EMAC_ZMII=y +CONFIG_IBM_NEW_EMAC_RGMII=y +CONFIG_IBM_NEW_EMAC_TAH=y +CONFIG_IBM_NEW_EMAC_EMAC4=y +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_PCI is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_DEBUGGER=y +# CONFIG_KGDB is not set +# CONFIG_XMON is not set +# CONFIG_VIRQ_DEBUG is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/ebony_defconfig b/arch/powerpc/configs/44x/ebony_defconfig index 07c8d4ce175a..07c8d4ce175a 100644 --- a/arch/powerpc/configs/ebony_defconfig +++ b/arch/powerpc/configs/44x/ebony_defconfig diff --git a/arch/powerpc/configs/katmai_defconfig b/arch/powerpc/configs/44x/katmai_defconfig index c8804ec01ea4..c8804ec01ea4 100644 --- a/arch/powerpc/configs/katmai_defconfig +++ b/arch/powerpc/configs/44x/katmai_defconfig diff --git a/arch/powerpc/configs/rainier_defconfig b/arch/powerpc/configs/44x/rainier_defconfig index dec18ca73519..dec18ca73519 100644 --- a/arch/powerpc/configs/rainier_defconfig +++ b/arch/powerpc/configs/44x/rainier_defconfig diff --git a/arch/powerpc/configs/sequoia_defconfig b/arch/powerpc/configs/44x/sequoia_defconfig index dd5d6303c396..dd5d6303c396 100644 --- a/arch/powerpc/configs/sequoia_defconfig +++ b/arch/powerpc/configs/44x/sequoia_defconfig diff --git a/arch/powerpc/configs/taishan_defconfig b/arch/powerpc/configs/44x/taishan_defconfig index 087aedce1338..087aedce1338 100644 --- a/arch/powerpc/configs/taishan_defconfig +++ b/arch/powerpc/configs/44x/taishan_defconfig diff --git a/arch/powerpc/configs/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig index 2313c3e8ef61..2313c3e8ef61 100644 --- a/arch/powerpc/configs/warp_defconfig +++ b/arch/powerpc/configs/44x/warp_defconfig diff --git a/arch/powerpc/configs/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig index 3b29ac53844e..7d18440e398f 100644 --- a/arch/powerpc/configs/mpc8313_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc6 -# Thu Jan 17 16:35:55 2008 +# Linux kernel version: 2.6.25-rc6 +# Fri Apr 11 11:10:09 2008 # # CONFIG_PPC64 is not set @@ -14,8 +14,8 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set -CONFIG_83xx=y CONFIG_PPC_FPU=y +# CONFIG_FSL_EMB_PERFMON is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set @@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -66,15 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -86,11 +91,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -98,6 +105,13 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -125,6 +139,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support @@ -133,11 +148,12 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_PPC_82xx is not set CONFIG_PPC_83xx=y # CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set +CONFIG_MPC83xx=y CONFIG_MPC831x_RDB=y # CONFIG_MPC832x_MDS is not set # CONFIG_MPC832x_RDB is not set @@ -145,7 +161,10 @@ CONFIG_MPC831x_RDB=y # CONFIG_MPC834x_ITX is not set # CONFIG_MPC836x_MDS is not set # CONFIG_MPC837x_MDS is not set +# CONFIG_MPC837x_RDB is not set +# CONFIG_SBC834x is not set CONFIG_PPC_MPC831x=y +CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -156,7 +175,6 @@ CONFIG_PPC_MPC831x=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -172,12 +190,17 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +CONFIG_FORCE_MAX_ZONEORDER=11 +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -196,11 +219,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # @@ -250,6 +269,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -305,6 +325,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -340,6 +361,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_OF_PARTS=y # # User Modules And Translation Layers @@ -415,6 +437,7 @@ CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set +CONFIG_MTD_NAND_FSL_ELBC=y # CONFIG_MTD_ONENAND is not set # @@ -438,7 +461,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -446,6 +469,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -510,6 +535,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -549,7 +575,6 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=y @@ -565,6 +590,7 @@ CONFIG_CICADA_PHY=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -573,6 +599,7 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ENC28J60 is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -592,6 +619,7 @@ CONFIG_E100=y # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -603,6 +631,9 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -629,6 +660,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -651,7 +683,6 @@ CONFIG_NETDEV_10000=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -694,6 +725,7 @@ CONFIG_INPUT=y # # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -767,14 +799,12 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_M41T00 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -813,6 +843,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -843,6 +874,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set @@ -852,9 +884,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -934,6 +968,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -947,10 +982,10 @@ CONFIG_USB_DEVICE_CLASS=y # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y +CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y @@ -1001,10 +1036,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1030,14 +1061,6 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set @@ -1063,7 +1086,9 @@ CONFIG_USB_ETH_RNDIS=y # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set # CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set @@ -1095,20 +1120,23 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set # # SPI RTC drivers # -# CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -1116,6 +1144,7 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -1141,12 +1170,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1199,8 +1226,10 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1248,7 +1277,6 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -1266,7 +1294,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1285,6 +1313,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1297,9 +1326,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -1318,6 +1347,7 @@ CONFIG_FORCED_INLINING=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set @@ -1335,6 +1365,9 @@ CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -1349,11 +1382,14 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig index 9adf7f98f675..1f57456dd81e 100644 --- a/arch/powerpc/configs/mpc8315_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc8 -# Wed Jan 23 20:02:25 2008 +# Linux kernel version: 2.6.25-rc6 +# Mon Mar 24 08:48:15 2008 # # CONFIG_PPC64 is not set @@ -14,8 +14,8 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set -CONFIG_83xx=y CONFIG_PPC_FPU=y +# CONFIG_FSL_EMB_PERFMON is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set @@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -66,15 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -86,11 +91,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -98,6 +105,12 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -126,6 +139,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support @@ -134,11 +148,12 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_PPC_82xx is not set CONFIG_PPC_83xx=y # CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set +CONFIG_MPC83xx=y CONFIG_MPC831x_RDB=y # CONFIG_MPC832x_MDS is not set # CONFIG_MPC832x_RDB is not set @@ -146,6 +161,8 @@ CONFIG_MPC831x_RDB=y # CONFIG_MPC834x_ITX is not set # CONFIG_MPC836x_MDS is not set # CONFIG_MPC837x_MDS is not set +# CONFIG_MPC837x_RDB is not set +# CONFIG_SBC834x is not set CONFIG_PPC_MPC831x=y CONFIG_IPIC=y # CONFIG_MPIC is not set @@ -158,7 +175,6 @@ CONFIG_IPIC=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -174,12 +190,16 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -198,11 +218,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # @@ -252,6 +268,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -307,6 +324,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -342,6 +360,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_OF_PARTS is not set # # User Modules And Translation Layers @@ -417,6 +436,7 @@ CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_NAND_FSL_ELBC is not set # CONFIG_MTD_ONENAND is not set # @@ -440,7 +460,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -448,6 +468,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -512,6 +534,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -566,6 +589,7 @@ CONFIG_SATA_FSL=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set @@ -623,6 +647,7 @@ CONFIG_PHYLIB=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -631,6 +656,7 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ENC28J60 is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -650,6 +676,7 @@ CONFIG_E100=y # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -661,7 +688,9 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -688,6 +717,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -710,7 +740,6 @@ CONFIG_NETDEV_10000=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -753,6 +782,7 @@ CONFIG_INPUT=y # # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -826,14 +856,12 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_M41T00 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -872,6 +900,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -902,6 +931,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set @@ -911,9 +941,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -993,6 +1025,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -1006,10 +1039,10 @@ CONFIG_USB_DEVICE_CLASS=y # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y +CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y @@ -1060,10 +1093,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1089,14 +1118,6 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set @@ -1122,7 +1143,9 @@ CONFIG_USB_ETH_RNDIS=y # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set # CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set @@ -1154,20 +1177,23 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set # # SPI RTC drivers # -# CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -1175,6 +1201,7 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -1200,12 +1227,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1258,8 +1283,10 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1324,7 +1351,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -1343,6 +1369,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1355,9 +1382,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -1376,6 +1403,7 @@ CONFIG_FORCED_INLINING=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set @@ -1393,6 +1421,9 @@ CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -1407,11 +1438,14 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig index 2d8951b1096e..50cceda8994f 100644 --- a/arch/powerpc/configs/mpc832x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:48:33 2007 +# Linux kernel version: 2.6.25-rc7 +# Mon Mar 31 11:36:51 2008 # # CONFIG_PPC64 is not set @@ -14,8 +14,8 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set -CONFIG_83xx=y CONFIG_PPC_FPU=y +# CONFIG_FSL_EMB_PERFMON is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set @@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -66,15 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -86,11 +91,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -98,6 +105,13 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -125,6 +139,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support @@ -133,18 +148,23 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_PPC_82xx is not set CONFIG_PPC_83xx=y # CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set -# CONFIG_MPC8313_RDB is not set +CONFIG_MPC83xx=y +# CONFIG_MPC831x_RDB is not set CONFIG_MPC832x_MDS=y # CONFIG_MPC832x_RDB is not set # CONFIG_MPC834x_MDS is not set # CONFIG_MPC834x_ITX is not set # CONFIG_MPC836x_MDS is not set +# CONFIG_MPC837x_MDS is not set +# CONFIG_MPC837x_RDB is not set +# CONFIG_SBC834x is not set CONFIG_PPC_MPC832x=y +CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -156,7 +176,6 @@ CONFIG_PPC_MPC832x=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set CONFIG_QUICC_ENGINE=y -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -172,13 +191,17 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -197,11 +220,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # @@ -250,6 +269,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -305,6 +325,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -349,7 +370,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -357,6 +378,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -421,6 +444,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -451,7 +475,6 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=y @@ -467,6 +490,7 @@ CONFIG_DAVICOM_PHY=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -488,6 +512,9 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -518,6 +545,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -531,7 +559,6 @@ CONFIG_NETDEV_10000=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -574,6 +601,7 @@ CONFIG_INPUT=y # # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -593,14 +621,14 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_QE is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set +# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -647,14 +675,12 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_M41T00 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -679,6 +705,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -708,6 +735,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set @@ -717,9 +745,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -785,12 +815,9 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set @@ -822,6 +849,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set # # SPI RTC drivers @@ -831,9 +859,10 @@ CONFIG_RTC_DRV_DS1374=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -841,6 +870,7 @@ CONFIG_RTC_DRV_DS1374=y # # on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -866,12 +896,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -913,8 +941,10 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -958,7 +988,6 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set CONFIG_UCC_FAST=y CONFIG_UCC=y @@ -976,7 +1005,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -990,6 +1018,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1003,6 +1032,7 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set @@ -1020,6 +1050,9 @@ CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -1034,12 +1067,15 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig index 761718a63b7c..ac913025713e 100644 --- a/arch/powerpc/configs/mpc832x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:48:35 2007 +# Linux kernel version: 2.6.25-rc6 +# Mon Mar 24 08:48:16 2008 # # CONFIG_PPC64 is not set @@ -14,8 +14,8 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set -CONFIG_83xx=y CONFIG_PPC_FPU=y +# CONFIG_FSL_EMB_PERFMON is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set @@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -66,15 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -86,11 +91,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -98,6 +105,13 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -125,6 +139,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support @@ -133,18 +148,23 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_PPC_82xx is not set CONFIG_PPC_83xx=y # CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set -# CONFIG_MPC8313_RDB is not set +CONFIG_MPC83xx=y +# CONFIG_MPC831x_RDB is not set # CONFIG_MPC832x_MDS is not set CONFIG_MPC832x_RDB=y # CONFIG_MPC834x_MDS is not set # CONFIG_MPC834x_ITX is not set # CONFIG_MPC836x_MDS is not set +# CONFIG_MPC837x_MDS is not set +# CONFIG_MPC837x_RDB is not set +# CONFIG_SBC834x is not set CONFIG_PPC_MPC832x=y +CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -156,7 +176,6 @@ CONFIG_PPC_MPC832x=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set CONFIG_QUICC_ENGINE=y -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -172,13 +191,17 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -197,11 +220,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # @@ -250,6 +269,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -305,6 +325,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -350,7 +371,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -358,6 +379,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -422,6 +445,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -452,7 +476,6 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=y @@ -468,6 +491,7 @@ CONFIG_PHYLIB=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set CONFIG_ICPLUS_PHY=y +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -476,6 +500,7 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ENC28J60 is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -491,6 +516,9 @@ CONFIG_E1000=y # CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -521,6 +549,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -543,7 +572,6 @@ CONFIG_NETDEV_10000=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -586,6 +614,7 @@ CONFIG_INPUT=y # # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -605,6 +634,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_QE is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -660,14 +690,12 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_M41T00 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -705,6 +733,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -735,6 +764,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set @@ -744,9 +774,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -826,6 +858,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -839,9 +872,10 @@ CONFIG_USB_DEVICE_CLASS=y # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EHCI_FSL is not set +CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y @@ -892,10 +926,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -921,14 +951,6 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set @@ -948,10 +970,12 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_MMC_WBSD is not set # CONFIG_MMC_TIFM_SD is not set CONFIG_MMC_SPI=y +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -977,12 +1001,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1027,8 +1049,10 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1116,7 +1140,6 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set CONFIG_UCC_FAST=y CONFIG_UCC=y @@ -1134,7 +1157,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -1148,6 +1170,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1161,6 +1184,7 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set @@ -1178,6 +1202,9 @@ CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -1192,12 +1219,15 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig index 2fbe4e5344f7..e1de399a7bdd 100644 --- a/arch/powerpc/configs/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:48:37 2007 +# Linux kernel version: 2.6.25-rc6 +# Mon Mar 24 08:48:17 2008 # # CONFIG_PPC64 is not set @@ -14,8 +14,8 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set -CONFIG_83xx=y CONFIG_PPC_FPU=y +# CONFIG_FSL_EMB_PERFMON is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set @@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -66,15 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -86,11 +91,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -98,6 +105,13 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -125,6 +139,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support @@ -133,18 +148,23 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_PPC_82xx is not set CONFIG_PPC_83xx=y # CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set -# CONFIG_MPC8313_RDB is not set +CONFIG_MPC83xx=y +# CONFIG_MPC831x_RDB is not set # CONFIG_MPC832x_MDS is not set # CONFIG_MPC832x_RDB is not set # CONFIG_MPC834x_MDS is not set CONFIG_MPC834x_ITX=y # CONFIG_MPC836x_MDS is not set -CONFIG_MPC834x=y +# CONFIG_MPC837x_MDS is not set +# CONFIG_MPC837x_RDB is not set +# CONFIG_SBC834x is not set +CONFIG_PPC_MPC834x=y +CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -155,7 +175,6 @@ CONFIG_MPC834x=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -171,12 +190,16 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -195,11 +218,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # @@ -248,6 +267,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -303,6 +323,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -427,7 +448,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -435,6 +456,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 # CONFIG_BLK_DEV_IDE is not set @@ -503,6 +526,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -533,6 +557,7 @@ CONFIG_SATA_SIL=y # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set +# CONFIG_SATA_FSL is not set # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -556,6 +581,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set @@ -599,7 +625,6 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=y @@ -615,6 +640,7 @@ CONFIG_CICADA_PHY=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set # CONFIG_NET_ETHERNET is not set @@ -623,6 +649,9 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -649,6 +678,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -671,7 +701,6 @@ CONFIG_NETDEV_10000=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -694,6 +723,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -767,14 +797,12 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set CONFIG_SENSORS_PCF8574=y -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_M41T00 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -803,6 +831,7 @@ CONFIG_SPI_MPC83xx=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -867,6 +896,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -880,10 +910,10 @@ CONFIG_USB_DEVICE_CLASS=y # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y +CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=y @@ -927,10 +957,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -956,16 +982,9 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set @@ -997,20 +1016,23 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set # # SPI RTC drivers # -# CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -1018,6 +1040,7 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -1043,12 +1066,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1094,8 +1115,10 @@ CONFIG_TMPFS=y # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1182,7 +1205,6 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -1198,7 +1220,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -1212,6 +1233,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1225,6 +1247,7 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set @@ -1242,6 +1265,9 @@ CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -1256,11 +1282,14 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig index 67cb09cc3ace..b4e39cf82a8c 100644 --- a/arch/powerpc/configs/mpc834x_itxgp_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:48:39 2007 +# Linux kernel version: 2.6.25-rc6 +# Mon Mar 24 08:48:18 2008 # # CONFIG_PPC64 is not set @@ -14,8 +14,8 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set -CONFIG_83xx=y CONFIG_PPC_FPU=y +# CONFIG_FSL_EMB_PERFMON is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set @@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -66,15 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -86,11 +91,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -98,6 +105,13 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -125,6 +139,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support @@ -133,18 +148,23 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_PPC_82xx is not set CONFIG_PPC_83xx=y # CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set -# CONFIG_MPC8313_RDB is not set +CONFIG_MPC83xx=y +# CONFIG_MPC831x_RDB is not set # CONFIG_MPC832x_MDS is not set # CONFIG_MPC832x_RDB is not set # CONFIG_MPC834x_MDS is not set CONFIG_MPC834x_ITX=y # CONFIG_MPC836x_MDS is not set -CONFIG_MPC834x=y +# CONFIG_MPC837x_MDS is not set +# CONFIG_MPC837x_RDB is not set +# CONFIG_SBC834x is not set +CONFIG_PPC_MPC834x=y +CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -155,7 +175,6 @@ CONFIG_MPC834x=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -171,12 +190,16 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -195,11 +218,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # @@ -248,6 +267,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -303,6 +323,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -427,7 +448,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -435,6 +456,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -499,6 +522,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -529,7 +553,6 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=y @@ -545,6 +568,7 @@ CONFIG_CICADA_PHY=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set # CONFIG_NET_ETHERNET is not set @@ -553,6 +577,9 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -579,6 +606,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -601,7 +629,6 @@ CONFIG_NETDEV_10000=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -624,6 +651,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -697,14 +725,12 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set CONFIG_SENSORS_PCF8574=y -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_M41T00 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -733,6 +759,7 @@ CONFIG_SPI_MPC83xx=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -797,6 +824,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -810,10 +838,10 @@ CONFIG_USB_DEVICE_CLASS=y # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y +CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=y @@ -857,10 +885,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -885,16 +909,9 @@ CONFIG_USB_MON=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set @@ -926,20 +943,23 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set # # SPI RTC drivers # -# CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -947,6 +967,7 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -972,12 +993,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1023,8 +1042,10 @@ CONFIG_TMPFS=y # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1111,7 +1132,6 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -1127,7 +1147,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -1141,6 +1160,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1154,6 +1174,7 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set @@ -1171,6 +1192,9 @@ CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -1185,11 +1209,14 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig index 217539f3ecef..b4e82c0e2be7 100644 --- a/arch/powerpc/configs/mpc834x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:48:41 2007 +# Linux kernel version: 2.6.25-rc7 +# Mon Mar 31 11:36:56 2008 # # CONFIG_PPC64 is not set @@ -14,8 +14,8 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set -CONFIG_83xx=y CONFIG_PPC_FPU=y +# CONFIG_FSL_EMB_PERFMON is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set @@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -66,15 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -86,11 +91,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -98,6 +105,13 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -125,6 +139,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support @@ -133,18 +148,23 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_PPC_82xx is not set CONFIG_PPC_83xx=y # CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set -# CONFIG_MPC8313_RDB is not set +CONFIG_MPC83xx=y +# CONFIG_MPC831x_RDB is not set # CONFIG_MPC832x_MDS is not set # CONFIG_MPC832x_RDB is not set CONFIG_MPC834x_MDS=y # CONFIG_MPC834x_ITX is not set # CONFIG_MPC836x_MDS is not set -CONFIG_MPC834x=y +# CONFIG_MPC837x_MDS is not set +# CONFIG_MPC837x_RDB is not set +# CONFIG_SBC834x is not set +CONFIG_PPC_MPC834x=y +CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -155,7 +175,6 @@ CONFIG_MPC834x=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -171,12 +190,16 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -195,11 +218,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # @@ -248,6 +267,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -303,6 +323,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -347,7 +368,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -355,6 +376,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -383,7 +406,6 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=y @@ -399,6 +421,7 @@ CONFIG_MARVELL_PHY=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -426,6 +449,7 @@ CONFIG_E100=y # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -437,6 +461,9 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -463,6 +490,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -475,7 +503,6 @@ CONFIG_NETDEV_10000=y # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -518,6 +545,7 @@ CONFIG_INPUT=y # # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -543,8 +571,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set +# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -591,14 +618,12 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_M41T00 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -623,6 +648,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -652,6 +678,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set @@ -661,9 +688,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -725,18 +754,13 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set -CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_EHCI_FSL=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set @@ -768,6 +792,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set # # SPI RTC drivers @@ -777,9 +802,10 @@ CONFIG_RTC_DRV_DS1374=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -787,6 +813,7 @@ CONFIG_RTC_DRV_DS1374=y # # on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -812,12 +839,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -859,8 +884,10 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -904,7 +931,6 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -920,7 +946,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -934,6 +959,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -947,6 +973,7 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set @@ -964,6 +991,9 @@ CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -978,11 +1008,14 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig index c44fc56263e2..d50a96eddcdc 100644 --- a/arch/powerpc/configs/mpc836x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:48:43 2007 +# Linux kernel version: 2.6.25-rc7 +# Mon Mar 31 11:36:57 2008 # # CONFIG_PPC64 is not set @@ -14,8 +14,8 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set -CONFIG_83xx=y CONFIG_PPC_FPU=y +# CONFIG_FSL_EMB_PERFMON is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set @@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -66,15 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -86,11 +91,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -98,6 +105,13 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -125,6 +139,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support @@ -133,18 +148,22 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_PPC_82xx is not set CONFIG_PPC_83xx=y # CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set -# CONFIG_MPC8313_RDB is not set +CONFIG_MPC83xx=y +# CONFIG_MPC831x_RDB is not set # CONFIG_MPC832x_MDS is not set # CONFIG_MPC832x_RDB is not set # CONFIG_MPC834x_MDS is not set # CONFIG_MPC834x_ITX is not set CONFIG_MPC836x_MDS=y -CONFIG_PPC_MPC836x=y +# CONFIG_MPC837x_MDS is not set +# CONFIG_MPC837x_RDB is not set +# CONFIG_SBC834x is not set +CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -156,7 +175,6 @@ CONFIG_PPC_MPC836x=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set CONFIG_QUICC_ENGINE=y -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -172,12 +190,16 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -196,11 +218,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # @@ -249,6 +267,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -304,6 +323,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -348,7 +368,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -356,6 +376,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -420,6 +442,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -450,7 +473,6 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=y @@ -466,6 +488,7 @@ CONFIG_MARVELL_PHY=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -487,6 +510,9 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -517,6 +543,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -530,7 +557,6 @@ CONFIG_NETDEV_10000=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -573,6 +599,7 @@ CONFIG_INPUT=y # # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -592,14 +619,14 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_QE is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set +# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -646,14 +673,12 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_M41T00 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -678,6 +703,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -707,6 +733,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set @@ -716,9 +743,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -784,12 +813,9 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set @@ -821,6 +847,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set # # SPI RTC drivers @@ -830,9 +857,10 @@ CONFIG_RTC_DRV_DS1374=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -840,6 +868,7 @@ CONFIG_RTC_DRV_DS1374=y # # on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -865,12 +894,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -912,8 +939,10 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -957,7 +986,6 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set CONFIG_UCC_FAST=y CONFIG_UCC=y @@ -975,7 +1003,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -989,6 +1016,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1002,6 +1030,7 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set @@ -1019,6 +1048,9 @@ CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -1033,12 +1065,15 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig index 91d291e3ee3a..f377cde785b0 100644 --- a/arch/powerpc/configs/mpc837x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc8 -# Thu Jan 24 20:04:39 2008 +# Linux kernel version: 2.6.25-rc6 +# Mon Mar 24 08:48:23 2008 # # CONFIG_PPC64 is not set @@ -14,8 +14,8 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set -CONFIG_83xx=y CONFIG_PPC_FPU=y +# CONFIG_FSL_EMB_PERFMON is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set @@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -66,17 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -89,17 +92,26 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -128,6 +140,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support @@ -136,19 +149,21 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_PPC_82xx is not set CONFIG_PPC_83xx=y # CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set +CONFIG_MPC83xx=y # CONFIG_MPC831x_RDB is not set # CONFIG_MPC832x_MDS is not set # CONFIG_MPC832x_RDB is not set # CONFIG_MPC834x_MDS is not set # CONFIG_MPC834x_ITX is not set # CONFIG_MPC836x_MDS is not set -# CONFIG_MPC837x_MDS is not set -CONFIG_MPC837x_RDB=y +CONFIG_MPC837x_MDS=y +# CONFIG_MPC837x_RDB is not set +# CONFIG_SBC834x is not set CONFIG_PPC_MPC837x=y CONFIG_IPIC=y # CONFIG_MPIC is not set @@ -161,7 +176,6 @@ CONFIG_IPIC=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -177,12 +191,16 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -201,11 +219,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # @@ -246,6 +260,11 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -265,9 +284,9 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y # CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y @@ -301,6 +320,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -340,11 +360,13 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -389,19 +411,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_MV is not set CONFIG_SATA_FSL=y # CONFIG_PATA_PLATFORM is not set -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -# CONFIG_MD_LINEAR is not set -# CONFIG_MD_RAID0 is not set -CONFIG_MD_RAID1=y -# CONFIG_MD_RAID10 is not set -CONFIG_MD_RAID456=y -CONFIG_MD_RAID5_RESHAPE=y -# CONFIG_MD_MULTIPATH is not set -# CONFIG_MD_FAULTY is not set -# CONFIG_BLK_DEV_DM is not set +# CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y # CONFIG_NETDEVICES_MULTIQUEUE is not set @@ -425,6 +438,7 @@ CONFIG_MARVELL_PHY=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -435,9 +449,10 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y -# CONFIG_NETDEV_10000 is not set +# CONFIG_GFAR_NAPI is not set +CONFIG_NETDEV_10000=y # # Wireless LAN @@ -447,7 +462,6 @@ CONFIG_GFAR_NAPI=y # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -542,14 +556,12 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_M41T00 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -574,6 +586,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -601,6 +614,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set @@ -608,9 +622,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -668,15 +684,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -702,12 +716,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -749,8 +761,10 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -813,17 +827,13 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_KPROBES is not set -# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y -# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -839,13 +849,10 @@ CONFIG_ENABLE_WARN_DEPRECATED=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_XOR_BLOCKS=y -CONFIG_ASYNC_CORE=y -CONFIG_ASYNC_MEMCPY=y -CONFIG_ASYNC_XOR=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set @@ -863,6 +870,9 @@ CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -877,11 +887,13 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig index 4f49aee5da66..a6331769d88f 100644 --- a/arch/powerpc/configs/mpc837x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23 -# Wed Oct 10 16:31:39 2007 +# Linux kernel version: 2.6.25-rc6 +# Mon Mar 24 08:48:24 2008 # # CONFIG_PPC64 is not set @@ -14,16 +14,22 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set -CONFIG_83xx=y CONFIG_PPC_FPU=y +# CONFIG_FSL_EMB_PERFMON is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 CONFIG_PPC_MERGE=y CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -61,12 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -79,17 +92,27 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -117,28 +140,32 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support # # CONFIG_PPC_MULTIPLATFORM is not set -# CONFIG_EMBEDDED6xx is not set # CONFIG_PPC_82xx is not set CONFIG_PPC_83xx=y # CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set -# CONFIG_MPC8313_RDB is not set +CONFIG_MPC83xx=y +# CONFIG_MPC831x_RDB is not set # CONFIG_MPC832x_MDS is not set # CONFIG_MPC832x_RDB is not set # CONFIG_MPC834x_MDS is not set # CONFIG_MPC834x_ITX is not set # CONFIG_MPC836x_MDS is not set -CONFIG_MPC837x_MDS=y +# CONFIG_MPC837x_MDS is not set +CONFIG_MPC837x_RDB=y +# CONFIG_SBC834x is not set CONFIG_PPC_MPC837x=y +CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -149,25 +176,31 @@ CONFIG_PPC_MPC837x=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set -CONFIG_FSL_SERDES=y # # Kernel options # # CONFIG_HIGHMEM is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -177,6 +210,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 @@ -185,11 +219,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # @@ -203,10 +233,6 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_DOMAINS is not set # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # @@ -220,7 +246,7 @@ CONFIG_FSL_SOC=y CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 +CONFIG_TASK_SIZE=0xc0000000 CONFIG_BOOT_LOAD=0x00800000 # @@ -234,10 +260,6 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -257,9 +279,10 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -285,10 +308,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -296,6 +315,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -317,6 +337,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -334,11 +355,13 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -377,14 +400,26 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_MV is not set CONFIG_SATA_FSL=y # CONFIG_PATA_PLATFORM is not set -# CONFIG_MD is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +# CONFIG_MD_LINEAR is not set +# CONFIG_MD_RAID0 is not set +CONFIG_MD_RAID1=y +# CONFIG_MD_RAID10 is not set +CONFIG_MD_RAID456=y +CONFIG_MD_RAID5_RESHAPE=y +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set +# CONFIG_BLK_DEV_DM is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y # CONFIG_NETDEVICES_MULTIQUEUE is not set @@ -393,6 +428,7 @@ CONFIG_NETDEVICES=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set CONFIG_PHYLIB=y # @@ -407,13 +443,21 @@ CONFIG_MARVELL_PHY=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set CONFIG_GIANFAR=y -# CONFIG_GFAR_NAPI is not set -CONFIG_NETDEV_10000=y +CONFIG_GFAR_NAPI=y +# CONFIG_NETDEV_10000 is not set # # Wireless LAN @@ -423,7 +467,6 @@ CONFIG_NETDEV_10000=y # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -442,7 +485,6 @@ CONFIG_INPUT=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -488,14 +530,6 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_83xx_WDT=y # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y @@ -527,14 +561,12 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_M41T00 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -551,8 +583,6 @@ CONFIG_I2C_MPC=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -560,12 +590,13 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -588,6 +619,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set @@ -595,9 +627,25 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_83xx_WDT=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers @@ -614,16 +662,15 @@ CONFIG_DAB=y # # Graphics support # +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=m -# CONFIG_FB is not set -# CONFIG_FB_IBM_GXT4500 is not set # # Sound @@ -632,37 +679,45 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Miscellaneous USB options # +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set # -# USB Gadget Support +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_FSL=y +CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -681,7 +736,6 @@ CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set @@ -689,12 +743,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -722,7 +774,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -737,14 +788,13 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -787,17 +837,8 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -815,22 +856,18 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y # -# Instrumentation Support -# -# CONFIG_PROFILING is not set -# CONFIG_KPROBES is not set - -# # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_MUST_CHECK is not set # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -838,9 +875,15 @@ CONFIG_ENABLE_MUST_CHECK=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_XOR_BLOCKS=y +CONFIG_ASYNC_CORE=y +CONFIG_ASYNC_MEMCPY=y +CONFIG_ASYNC_XOR=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set @@ -857,6 +900,10 @@ CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -870,9 +917,14 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig index 9245bcc24724..1f1518229f6d 100644 --- a/arch/powerpc/configs/sbc834x_defconfig +++ b/arch/powerpc/configs/83xx/sbc834x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc8 -# Thu Jan 24 15:54:27 2008 +# Linux kernel version: 2.6.25-rc6 +# Mon Mar 24 08:48:38 2008 # # CONFIG_PPC64 is not set @@ -14,8 +14,8 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set -CONFIG_83xx=y CONFIG_PPC_FPU=y +# CONFIG_FSL_EMB_PERFMON is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set @@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -66,17 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -88,17 +91,25 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -127,6 +138,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support @@ -135,20 +147,22 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_PPC_82xx is not set CONFIG_PPC_83xx=y # CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set -# CONFIG_MPC8313_RDB is not set +CONFIG_MPC83xx=y +# CONFIG_MPC831x_RDB is not set # CONFIG_MPC832x_MDS is not set # CONFIG_MPC832x_RDB is not set # CONFIG_MPC834x_MDS is not set # CONFIG_MPC834x_ITX is not set # CONFIG_MPC836x_MDS is not set # CONFIG_MPC837x_MDS is not set +# CONFIG_MPC837x_RDB is not set CONFIG_SBC834x=y -CONFIG_MPC834x=y +CONFIG_PPC_MPC834x=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -175,12 +189,16 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -199,11 +217,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # @@ -248,6 +262,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -303,6 +318,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -342,11 +358,13 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -381,6 +399,7 @@ CONFIG_PHYLIB=y # CONFIG_SMSC_PHY is not set CONFIG_BROADCOM_PHY=y # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -391,6 +410,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set CONFIG_GIANFAR=y # CONFIG_GFAR_NAPI is not set # CONFIG_NETDEV_10000 is not set @@ -403,7 +423,6 @@ CONFIG_GIANFAR=y # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -498,14 +517,12 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_M41T00 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -530,6 +547,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -557,6 +575,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set @@ -564,9 +583,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -617,9 +638,11 @@ CONFIG_HID=y # CONFIG_HIDRAW is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -638,12 +661,10 @@ CONFIG_HID=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -685,8 +706,10 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -733,7 +756,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -759,6 +781,7 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set @@ -776,6 +799,9 @@ CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -790,11 +816,13 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig new file mode 100644 index 000000000000..2d0debcefdbf --- /dev/null +++ b/arch/powerpc/configs/85xx/ksi8560_defconfig @@ -0,0 +1,899 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24 +# Mon Feb 11 16:25:19 2008 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_6xx is not set +CONFIG_PPC_85xx=y +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_E500=y +CONFIG_BOOKE=y +CONFIG_FSL_BOOKE=y +CONFIG_FSL_EMB_PERFMON=y +# CONFIG_PHYS_64BIT is not set +CONFIG_SPE=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_RCU is not set + +# +# Platform support +# +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +CONFIG_MPC85xx=y +# CONFIG_MPC8540_ADS is not set +# CONFIG_MPC8560_ADS is not set +# CONFIG_MPC85xx_CDS is not set +# CONFIG_MPC85xx_MDS is not set +# CONFIG_MPC85xx_DS is not set +CONFIG_KSI8560=y +# CONFIG_STX_GP3 is not set +# CONFIG_TQM8540 is not set +# CONFIG_TQM8541 is not set +# CONFIG_TQM8555 is not set +# CONFIG_TQM8560 is not set +# CONFIG_SBC8548 is not set +# CONFIG_SBC8560 is not set +# CONFIG_IPIC is not set +CONFIG_MPIC=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +CONFIG_CPM2=y +CONFIG_PPC_CPM_NEW_BINDING=y +# CONFIG_FSL_ULI1575 is not set +CONFIG_CPM=y + +# +# Kernel options +# +CONFIG_HIGHMEM=y +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_RCU_TRACE=y +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=y +CONFIG_MATH_EMULATION=y +# CONFIG_IOMMU_HELPER is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_PROC_DEVICETREE is not set +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +# CONFIG_SECCOMP is not set +CONFIG_WANT_DEVICE_TREE=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_FSL_SOC=y +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +# CONFIG_BLK_DEV_IDEDISK is not set +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_PLATFORM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +CONFIG_MDIO_BITBANG=y +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_FS_ENET=y +# CONFIG_FS_ENET_HAS_SCC is not set +CONFIG_FS_ENET_HAS_FCC=y +CONFIG_FS_ENET_MDIO_FCC=y +CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set +CONFIG_GIANFAR=y +CONFIG_GFAR_NAPI=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_CPM=y +CONFIG_SERIAL_CPM_CONSOLE=y +CONFIG_SERIAL_CPM_SCC1=y +# CONFIG_SERIAL_CPM_SCC2 is not set +# CONFIG_SERIAL_CPM_SCC3 is not set +# CONFIG_SERIAL_CPM_SCC4 is not set +# CONFIG_SERIAL_CPM_SMC1 is not set +# CONFIG_SERIAL_CPM_SMC2 is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +CONFIG_USB_SUPPORT=y +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +# CONFIG_MSDOS_PARTITION is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_HIGHMEM is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUGGER is not set +# CONFIG_KGDB_CONSOLE is not set +# CONFIG_VIRQ_DEBUG is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_SEQIV is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_PPC_CLOCK is not set +CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig index 3791e29e7d06..b998539da86e 100644 --- a/arch/powerpc/configs/mpc8540_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:48:44 2007 +# Linux kernel version: 2.6.25-rc6 +# Mon Mar 24 08:48:25 2008 # # CONFIG_PPC64 is not set @@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set -CONFIG_85xx=y CONFIG_E500=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y +CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set @@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -67,15 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -89,11 +94,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -101,6 +108,13 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -123,22 +137,30 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set +CONFIG_MPC85xx=y CONFIG_MPC8540_ADS=y # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set -CONFIG_MPC8540=y -CONFIG_MPC85xx=y +# CONFIG_STX_GP3 is not set +# CONFIG_TQM8540 is not set +# CONFIG_TQM8541 is not set +# CONFIG_TQM8555 is not set +# CONFIG_TQM8560 is not set +# CONFIG_SBC8548 is not set +# CONFIG_SBC8560 is not set +# CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -165,13 +187,17 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_MATH_EMULATION=y +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -190,18 +216,13 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y # CONFIG_SECCOMP is not set -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # # Bus options # CONFIG_ZONE_DMA=y -CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y # CONFIG_PCI is not set # CONFIG_PCI_DOMAINS is not set @@ -238,6 +259,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -293,6 +315,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -334,11 +357,13 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -373,6 +398,7 @@ CONFIG_PHYLIB=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -383,6 +409,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set CONFIG_GIANFAR=y CONFIG_GFAR_NAPI=y CONFIG_NETDEV_10000=y @@ -395,7 +422,6 @@ CONFIG_NETDEV_10000=y # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -489,6 +515,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -538,15 +565,13 @@ CONFIG_USB_SUPPORT=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -572,12 +597,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -619,8 +642,10 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -661,7 +686,6 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -677,7 +701,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -696,6 +719,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -708,8 +732,8 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -725,5 +749,48 @@ CONFIG_FORCED_INLINING=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_SEQIV is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/mpc8544_ds_defconfig b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig index 18623a8ee75c..a9f113b243ae 100644 --- a/arch/powerpc/configs/mpc8544_ds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:48:46 2007 +# Linux kernel version: 2.6.25-rc7 +# Mon Mar 31 11:37:03 2008 # # CONFIG_PPC64 is not set @@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set -CONFIG_85xx=y CONFIG_E500=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y +CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set @@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -68,17 +69,21 @@ CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set CONFIG_AUDIT=y # CONFIG_AUDITSYSCALL is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -92,11 +97,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -104,6 +111,14 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -131,21 +146,31 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set +CONFIG_MPC85xx=y # CONFIG_MPC8540_ADS is not set # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set CONFIG_MPC85xx_DS=y -CONFIG_MPC85xx=y +# CONFIG_KSI8560 is not set +# CONFIG_STX_GP3 is not set +# CONFIG_TQM8540 is not set +# CONFIG_TQM8541 is not set +# CONFIG_TQM8555 is not set +# CONFIG_TQM8560 is not set +# CONFIG_SBC8548 is not set +# CONFIG_SBC8560 is not set +# CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set CONFIG_PPC_I8259=y @@ -172,13 +197,18 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MATH_EMULATION=y +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -197,11 +227,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # @@ -252,6 +278,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -335,6 +362,7 @@ CONFIG_SCTP_HMAC_MD5=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -383,7 +411,7 @@ CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -391,6 +419,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -456,6 +486,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -486,6 +517,7 @@ CONFIG_SATA_AHCI=y # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set +# CONFIG_SATA_FSL is not set CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -509,6 +541,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set @@ -542,7 +575,6 @@ CONFIG_DUMMY=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=y @@ -558,6 +590,7 @@ CONFIG_VITESSE_PHY=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -579,6 +612,9 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -605,6 +641,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -627,7 +664,6 @@ CONFIG_NETDEV_10000=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -678,6 +714,7 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -707,8 +744,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y -CONFIG_GEN_RTC=y -CONFIG_GEN_RTC_X=y +# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -756,14 +792,12 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_M41T00 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -779,6 +813,7 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -803,6 +838,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # Supported SAA7146 based PCI Adapters # +# CONFIG_TTPCI_EEPROM is not set +# CONFIG_DVB_BUDGET_CORE is not set # # Supported USB Adapters @@ -888,11 +925,13 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_PLL is not set # CONFIG_DVB_TDA826X is not set # CONFIG_DVB_TDA827X is not set +# CONFIG_DVB_TDA18271 is not set # CONFIG_DVB_TUNER_QT1010 is not set # CONFIG_DVB_TUNER_MT2060 is not set # CONFIG_DVB_TUNER_MT2266 is not set # CONFIG_DVB_TUNER_MT2131 is not set # CONFIG_DVB_TUNER_DIB0070 is not set +# CONFIG_DVB_TUNER_XC5000 is not set # # Miscellaneous devices @@ -970,6 +1009,7 @@ CONFIG_SND_AC97_CODEC=y # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set @@ -995,6 +1035,7 @@ CONFIG_SND_AC97_CODEC=y # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set CONFIG_SND_INTEL8X0=y @@ -1012,6 +1053,7 @@ CONFIG_SND_INTEL8X0=y # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set # CONFIG_SND_AC97_POWER_SAVE is not set @@ -1041,6 +1083,10 @@ CONFIG_SND_INTEL8X0=y # # +# ALSA SoC audio for Freescale SOCs +# + +# # Open Sound System # # CONFIG_SOUND_PRIME is not set @@ -1063,6 +1109,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -1076,9 +1123,10 @@ CONFIG_USB_DEVICE_CLASS=y # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EHCI_FSL is not set +CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y @@ -1129,10 +1177,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1158,16 +1202,9 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set @@ -1199,6 +1236,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set # # SPI RTC drivers @@ -1208,9 +1246,10 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -1218,6 +1257,19 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # +CONFIG_DMADEVICES=y + +# +# DMA Devices +# +CONFIG_FSL_DMA=y +# CONFIG_FSL_DMA_SELFTEST is not set +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +# CONFIG_NET_DMA is not set # # Userspace I/O @@ -1243,12 +1295,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1300,8 +1350,10 @@ CONFIG_BFS_FS=m CONFIG_EFS_FS=m CONFIG_CRAMFS=y CONFIG_VXFS_FS=m +# CONFIG_MINIX_FS is not set CONFIG_HPFS_FS=m CONFIG_QNX4FS_FS=m +# CONFIG_ROMFS_FS is not set CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set @@ -1393,7 +1445,6 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -1410,7 +1461,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1429,6 +1480,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1442,9 +1494,9 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -1463,6 +1515,7 @@ CONFIG_FORCED_INLINING=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y @@ -1481,6 +1534,9 @@ CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -1495,11 +1551,14 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig index 51f9693bacd4..851ac9115617 100644 --- a/arch/powerpc/configs/mpc8560_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:48:48 2007 +# Linux kernel version: 2.6.25-rc6 +# Mon Mar 24 08:48:27 2008 # # CONFIG_PPC64 is not set @@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set -CONFIG_85xx=y CONFIG_E500=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y +CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set @@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -67,15 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -89,11 +94,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -101,6 +108,13 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -123,22 +137,30 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set +CONFIG_MPC85xx=y # CONFIG_MPC8540_ADS is not set CONFIG_MPC8560_ADS=y # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set -CONFIG_MPC8560=y -CONFIG_MPC85xx=y +# CONFIG_STX_GP3 is not set +# CONFIG_TQM8540 is not set +# CONFIG_TQM8541 is not set +# CONFIG_TQM8555 is not set +# CONFIG_TQM8560 is not set +# CONFIG_SBC8548 is not set +# CONFIG_SBC8560 is not set +# CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -167,13 +189,17 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_MATH_EMULATION=y +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -192,11 +218,7 @@ CONFIG_VIRT_TO_BUS=y # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y # CONFIG_SECCOMP is not set -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # @@ -246,6 +268,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -301,6 +324,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -347,7 +371,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -355,6 +379,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -383,7 +409,6 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=y @@ -399,6 +424,7 @@ CONFIG_DAVICOM_PHY=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -426,6 +452,9 @@ CONFIG_E1000=y CONFIG_E1000_NAPI=y # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -452,6 +481,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -464,7 +494,6 @@ CONFIG_NETDEV_10000=y # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -507,6 +536,7 @@ CONFIG_INPUT=y # # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -567,6 +597,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -619,16 +650,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -654,12 +683,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -701,8 +728,10 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -743,7 +772,6 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -759,7 +787,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -778,6 +805,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -790,8 +818,8 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -808,6 +836,50 @@ CONFIG_FORCED_INLINING=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_SEQIV is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/mpc8568mds_defconfig b/arch/powerpc/configs/85xx/mpc8568mds_defconfig index f51b58ae329a..2b866b385607 100644 --- a/arch/powerpc/configs/mpc8568mds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8568mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:48:50 2007 +# Linux kernel version: 2.6.25-rc7 +# Mon Mar 31 11:37:05 2008 # # CONFIG_PPC64 is not set @@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set -CONFIG_85xx=y CONFIG_E500=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y +CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set @@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -67,15 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -87,11 +92,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -99,6 +106,13 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -126,21 +140,30 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set +CONFIG_MPC85xx=y # CONFIG_MPC8540_ADS is not set # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set CONFIG_MPC85xx_MDS=y # CONFIG_MPC85xx_DS is not set -CONFIG_MPC85xx=y +# CONFIG_STX_GP3 is not set +# CONFIG_TQM8540 is not set +# CONFIG_TQM8541 is not set +# CONFIG_TQM8555 is not set +# CONFIG_TQM8560 is not set +# CONFIG_SBC8548 is not set +# CONFIG_SBC8560 is not set +# CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -168,13 +191,17 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -193,11 +220,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # @@ -247,6 +270,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -302,6 +326,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -348,7 +373,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -356,6 +381,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -420,6 +447,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -450,7 +478,6 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=y @@ -466,6 +493,7 @@ CONFIG_MARVELL_PHY=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -487,6 +515,9 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -514,6 +545,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -527,7 +559,6 @@ CONFIG_NETDEV_10000=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -570,6 +601,7 @@ CONFIG_INPUT=y # # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -590,14 +622,14 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_QE is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set +# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -644,14 +676,12 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_M41T00 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -676,6 +706,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -705,6 +736,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set @@ -714,9 +746,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -782,12 +816,9 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set @@ -819,6 +850,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set # # SPI RTC drivers @@ -828,9 +860,10 @@ CONFIG_RTC_DRV_DS1374=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -838,6 +871,7 @@ CONFIG_RTC_DRV_DS1374=y # # on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -863,12 +897,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -910,8 +942,10 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -955,7 +989,6 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -971,7 +1004,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -990,6 +1022,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1002,9 +1035,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -1023,6 +1056,7 @@ CONFIG_PPC_EARLY_DEBUG=y # CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set # CONFIG_PPC_EARLY_DEBUG_BEAT is not set # CONFIG_PPC_EARLY_DEBUG_44x is not set +# CONFIG_PPC_EARLY_DEBUG_40x is not set # CONFIG_PPC_EARLY_DEBUG_CPM is not set # @@ -1034,6 +1068,7 @@ CONFIG_PPC_EARLY_DEBUG=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set @@ -1051,6 +1086,9 @@ CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -1065,12 +1103,15 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/mpc8572_ds_defconfig b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig index b40802d17e03..53aa6f3173a5 100644 --- a/arch/powerpc/configs/mpc8572_ds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:48:52 2007 +# Linux kernel version: 2.6.25-rc7 +# Mon Mar 31 11:37:06 2008 # # CONFIG_PPC64 is not set @@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set -CONFIG_85xx=y CONFIG_E500=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y +CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set @@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -68,17 +69,21 @@ CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set CONFIG_AUDIT=y # CONFIG_AUDITSYSCALL is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -92,11 +97,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -104,6 +111,14 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -131,21 +146,30 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set +CONFIG_MPC85xx=y # CONFIG_MPC8540_ADS is not set # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set CONFIG_MPC85xx_DS=y -CONFIG_MPC85xx=y +# CONFIG_STX_GP3 is not set +# CONFIG_TQM8540 is not set +# CONFIG_TQM8541 is not set +# CONFIG_TQM8555 is not set +# CONFIG_TQM8560 is not set +# CONFIG_SBC8548 is not set +# CONFIG_SBC8560 is not set +# CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set CONFIG_PPC_I8259=y @@ -172,13 +196,17 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -197,11 +225,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # @@ -252,6 +276,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -335,6 +360,7 @@ CONFIG_SCTP_HMAC_MD5=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -383,7 +409,7 @@ CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -391,6 +417,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -456,6 +484,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -486,6 +515,7 @@ CONFIG_SATA_AHCI=y # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set +# CONFIG_SATA_FSL is not set CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -509,6 +539,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set @@ -542,7 +573,6 @@ CONFIG_DUMMY=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=y @@ -558,6 +588,7 @@ CONFIG_VITESSE_PHY=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -579,6 +610,9 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -605,6 +639,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -627,7 +662,6 @@ CONFIG_NETDEV_10000=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -678,6 +712,7 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -707,8 +742,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y -CONFIG_GEN_RTC=y -CONFIG_GEN_RTC_X=y +# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -756,14 +790,12 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_M41T00 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -779,6 +811,7 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -803,6 +836,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # Supported SAA7146 based PCI Adapters # +# CONFIG_TTPCI_EEPROM is not set +# CONFIG_DVB_BUDGET_CORE is not set # # Supported USB Adapters @@ -888,11 +923,13 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_PLL is not set # CONFIG_DVB_TDA826X is not set # CONFIG_DVB_TDA827X is not set +# CONFIG_DVB_TDA18271 is not set # CONFIG_DVB_TUNER_QT1010 is not set # CONFIG_DVB_TUNER_MT2060 is not set # CONFIG_DVB_TUNER_MT2266 is not set # CONFIG_DVB_TUNER_MT2131 is not set # CONFIG_DVB_TUNER_DIB0070 is not set +# CONFIG_DVB_TUNER_XC5000 is not set # # Miscellaneous devices @@ -970,6 +1007,7 @@ CONFIG_SND_AC97_CODEC=y # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set @@ -995,6 +1033,7 @@ CONFIG_SND_AC97_CODEC=y # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set CONFIG_SND_INTEL8X0=y @@ -1012,6 +1051,7 @@ CONFIG_SND_INTEL8X0=y # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set # CONFIG_SND_AC97_POWER_SAVE is not set @@ -1041,6 +1081,10 @@ CONFIG_SND_INTEL8X0=y # # +# ALSA SoC audio for Freescale SOCs +# + +# # Open Sound System # # CONFIG_SOUND_PRIME is not set @@ -1063,6 +1107,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -1076,9 +1121,10 @@ CONFIG_USB_DEVICE_CLASS=y # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EHCI_FSL is not set +CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y @@ -1129,10 +1175,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1158,16 +1200,9 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set @@ -1199,6 +1234,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set # # SPI RTC drivers @@ -1208,9 +1244,10 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -1218,6 +1255,7 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -1243,12 +1281,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1300,8 +1336,10 @@ CONFIG_BFS_FS=m CONFIG_EFS_FS=m CONFIG_CRAMFS=y CONFIG_VXFS_FS=m +# CONFIG_MINIX_FS is not set CONFIG_HPFS_FS=m CONFIG_QNX4FS_FS=m +# CONFIG_ROMFS_FS is not set CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set @@ -1393,7 +1431,6 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -1410,7 +1447,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -1429,6 +1465,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1442,9 +1479,9 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -1463,6 +1500,7 @@ CONFIG_FORCED_INLINING=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y @@ -1481,6 +1519,9 @@ CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -1495,11 +1536,14 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig index 2f9ad589b004..a469fe918816 100644 --- a/arch/powerpc/configs/mpc85xx_cds_defconfig +++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:48:54 2007 +# Linux kernel version: 2.6.25-rc6 +# Mon Mar 24 08:48:30 2008 # # CONFIG_PPC64 is not set @@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set -CONFIG_85xx=y CONFIG_E500=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y +CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set @@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -67,15 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -89,11 +94,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -101,6 +108,13 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -123,22 +137,30 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set +CONFIG_MPC85xx=y # CONFIG_MPC8540_ADS is not set # CONFIG_MPC8560_ADS is not set CONFIG_MPC85xx_CDS=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set -CONFIG_MPC8540=y -CONFIG_MPC85xx=y +# CONFIG_STX_GP3 is not set +# CONFIG_TQM8540 is not set +# CONFIG_TQM8541 is not set +# CONFIG_TQM8555 is not set +# CONFIG_TQM8560 is not set +# CONFIG_SBC8548 is not set +# CONFIG_SBC8560 is not set +# CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set CONFIG_PPC_I8259=y @@ -165,13 +187,17 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_MATH_EMULATION=y +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -190,11 +216,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y # CONFIG_SECCOMP is not set -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # @@ -244,6 +266,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -299,6 +322,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -345,7 +369,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -353,12 +377,14 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set # CONFIG_BLK_DEV_IDEDISK is not set @@ -374,12 +400,12 @@ CONFIG_IDE_PROC_FS=y # CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y # # PCI IDE chipsets support # CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y @@ -410,7 +436,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_TRM290 is not set CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y CONFIG_IDE_ARCH_OBSOLETE_INIT=y # CONFIG_BLK_DEV_HD is not set @@ -441,7 +466,6 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=y @@ -457,6 +481,7 @@ CONFIG_PHYLIB=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -480,6 +505,9 @@ CONFIG_E1000=y CONFIG_E1000_NAPI=y # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -506,6 +534,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -518,7 +547,6 @@ CONFIG_NETDEV_10000=y # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -561,6 +589,7 @@ CONFIG_INPUT=y # # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -620,6 +649,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -672,16 +702,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -707,12 +735,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -754,8 +780,10 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -796,7 +824,6 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -812,7 +839,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -831,6 +857,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -843,8 +870,8 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -860,5 +887,49 @@ CONFIG_FORCED_INLINING=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_SEQIV is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig index 3b7fa53a2475..67f67978c742 100644 --- a/arch/powerpc/configs/sbc8548_defconfig +++ b/arch/powerpc/configs/85xx/sbc8548_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc8 -# Thu Jan 24 15:19:12 2008 +# Linux kernel version: 2.6.25-rc6 +# Mon Mar 24 08:48:39 2008 # # CONFIG_PPC64 is not set @@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set -CONFIG_85xx=y CONFIG_E500=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y +CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set @@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -67,17 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -90,17 +93,25 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -124,24 +135,29 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set +CONFIG_MPC85xx=y # CONFIG_MPC8540_ADS is not set # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_STX_GP3 is not set +# CONFIG_TQM8540 is not set +# CONFIG_TQM8541 is not set +# CONFIG_TQM8555 is not set +# CONFIG_TQM8560 is not set CONFIG_SBC8548=y # CONFIG_SBC8560 is not set -CONFIG_MPC8540=y -CONFIG_MPC85xx=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -153,6 +169,7 @@ CONFIG_MPIC=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -168,13 +185,17 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_MATH_EMULATION=y +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -193,11 +214,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y # CONFIG_SECCOMP is not set -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # @@ -246,6 +263,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -301,6 +319,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -345,7 +364,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -353,6 +372,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -396,6 +417,7 @@ CONFIG_PHYLIB=y # CONFIG_SMSC_PHY is not set CONFIG_BROADCOM_PHY=y # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -417,7 +439,9 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -444,6 +468,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -456,7 +481,6 @@ CONFIG_NETDEV_10000=y # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -499,6 +523,7 @@ CONFIG_INPUT=y # # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -558,6 +583,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -600,10 +626,12 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -622,12 +650,10 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -669,8 +695,10 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -714,7 +742,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -737,5 +764,49 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_SEQIV is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig index d89fce0d3ba1..fef605579e29 100644 --- a/arch/powerpc/configs/sbc8560_defconfig +++ b/arch/powerpc/configs/85xx/sbc8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Wed Jan 23 14:59:20 2008 +# Linux kernel version: 2.6.25-rc6 +# Mon Mar 24 08:48:39 2008 # # CONFIG_PPC64 is not set @@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set -CONFIG_85xx=y CONFIG_E500=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y +CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set @@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -67,17 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -91,17 +94,26 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -124,23 +136,30 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set +CONFIG_MPC85xx=y # CONFIG_MPC8540_ADS is not set # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_STX_GP3 is not set +# CONFIG_TQM8540 is not set +# CONFIG_TQM8541 is not set +# CONFIG_TQM8555 is not set +# CONFIG_TQM8560 is not set +# CONFIG_SBC8548 is not set CONFIG_SBC8560=y -CONFIG_MPC8560=y -CONFIG_MPC85xx=y +# CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -167,13 +186,17 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y # CONFIG_MATH_EMULATION is not set +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -192,11 +215,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y # CONFIG_SECCOMP is not set -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # @@ -239,6 +258,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -294,6 +314,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -335,11 +356,13 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -374,6 +397,7 @@ CONFIG_PHYLIB=y # CONFIG_SMSC_PHY is not set CONFIG_BROADCOM_PHY=y # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -384,6 +408,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set CONFIG_GIANFAR=y CONFIG_GFAR_NAPI=y CONFIG_NETDEV_10000=y @@ -396,7 +421,6 @@ CONFIG_NETDEV_10000=y # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -489,6 +513,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -538,12 +563,9 @@ CONFIG_USB_SUPPORT=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -569,9 +591,10 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set CONFIG_RTC_DRV_M48T59=y # CONFIG_RTC_DRV_V3020 is not set @@ -579,6 +602,7 @@ CONFIG_RTC_DRV_M48T59=y # # on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -597,12 +621,10 @@ CONFIG_RTC_DRV_M48T59=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -644,8 +666,10 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -686,7 +710,6 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -702,7 +725,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -733,8 +755,8 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -752,6 +774,7 @@ CONFIG_PPC_EARLY_DEBUG=y # CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set # CONFIG_PPC_EARLY_DEBUG_BEAT is not set # CONFIG_PPC_EARLY_DEBUG_44x is not set +# CONFIG_PPC_EARLY_DEBUG_40x is not set # CONFIG_PPC_EARLY_DEBUG_CPM is not set # @@ -760,5 +783,48 @@ CONFIG_PPC_EARLY_DEBUG=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_SEQIV is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig index e8137a839bd4..1d303c49bb0c 100644 --- a/arch/powerpc/configs/stx_gp3_defconfig +++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc8 -# Thu Jan 24 02:02:30 2008 +# Linux kernel version: 2.6.25-rc6 +# Mon Mar 24 08:48:42 2008 # # CONFIG_PPC64 is not set @@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set -CONFIG_85xx=y CONFIG_E500=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y +CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set @@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -67,17 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -91,11 +94,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -103,6 +108,13 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -130,23 +142,29 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set +CONFIG_MPC85xx=y # CONFIG_MPC8540_ADS is not set # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set CONFIG_STX_GP3=y -CONFIG_MPC8560=y -CONFIG_MPC85xx=y +# CONFIG_TQM8540 is not set +# CONFIG_TQM8541 is not set +# CONFIG_TQM8555 is not set +# CONFIG_TQM8560 is not set +# CONFIG_SBC8548 is not set +# CONFIG_SBC8560 is not set # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -176,13 +194,17 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -201,11 +223,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="stx_gp3_8560.dts" CONFIG_ISA_DMA_API=y # @@ -255,6 +273,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -290,31 +309,36 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set # CONFIG_NETFILTER_XT_MATCH_DCCP is not set # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set # CONFIG_NETFILTER_XT_MATCH_MAC is not set # CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set # CONFIG_NETFILTER_XT_MATCH_POLICY is not set # CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set # CONFIG_NETFILTER_XT_MATCH_SCTP is not set # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set @@ -329,13 +353,10 @@ CONFIG_NETFILTER_XTABLES=m # # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=m -# CONFIG_IP_NF_MATCH_IPRANGE is not set -# CONFIG_IP_NF_MATCH_TOS is not set # CONFIG_IP_NF_MATCH_RECENT is not set # CONFIG_IP_NF_MATCH_ECN is not set # CONFIG_IP_NF_MATCH_AH is not set # CONFIG_IP_NF_MATCH_TTL is not set -# CONFIG_IP_NF_MATCH_OWNER is not set # CONFIG_IP_NF_MATCH_ADDRTYPE is not set CONFIG_IP_NF_FILTER=m # CONFIG_IP_NF_TARGET_REJECT is not set @@ -365,6 +386,7 @@ CONFIG_IP_NF_FILTER=m # CONFIG_NET_PKTGEN=y # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -418,7 +440,7 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -426,17 +448,20 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=m +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set @@ -452,7 +477,6 @@ CONFIG_IDE_GENERIC=y # # PCI IDE chipsets support # -# CONFIG_IDEPCI_PCIBUS_ORDER is not set # CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_AEC62XX is not set @@ -480,7 +504,6 @@ CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set CONFIG_IDE_ARCH_OBSOLETE_INIT=y # CONFIG_BLK_DEV_HD is not set @@ -550,6 +573,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -595,6 +619,7 @@ CONFIG_MARVELL_PHY=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -618,7 +643,9 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -645,6 +672,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -659,7 +687,6 @@ CONFIG_NETDEV_10000=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -727,6 +754,7 @@ CONFIG_SERIO_LIBPS2=y # # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -805,14 +833,12 @@ CONFIG_I2C_ALGOBIT=m # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_M41T00 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -837,6 +863,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -866,6 +893,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set @@ -875,9 +903,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -947,16 +977,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # @@ -983,12 +1011,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -1036,8 +1062,10 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1124,10 +1152,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_KPROBES is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -1146,6 +1170,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1159,9 +1184,9 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -1178,6 +1203,51 @@ CONFIG_BDI_SWITCH=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_SEQIV is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig index 732de34cfc27..d39ee3b35bfc 100644 --- a/arch/powerpc/configs/tqm8540_defconfig +++ b/arch/powerpc/configs/85xx/tqm8540_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc8 -# Fri Jan 25 01:32:05 2008 +# Linux kernel version: 2.6.25-rc6 +# Mon Mar 24 08:48:43 2008 # # CONFIG_PPC64 is not set @@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set -CONFIG_85xx=y CONFIG_E500=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y +CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set @@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -67,17 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -89,11 +92,13 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -101,6 +106,12 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -124,15 +135,17 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set +CONFIG_MPC85xx=y # CONFIG_MPC8540_ADS is not set # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set @@ -143,8 +156,9 @@ CONFIG_TQM8540=y # CONFIG_TQM8541 is not set # CONFIG_TQM8555 is not set # CONFIG_TQM8560 is not set +# CONFIG_SBC8548 is not set +# CONFIG_SBC8560 is not set CONFIG_TQM85xx=y -CONFIG_MPC85xx=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -173,13 +187,17 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -198,11 +216,7 @@ CONFIG_VIRT_TO_BUS=y # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="tqm8540.dts" CONFIG_ISA_DMA_API=y # @@ -249,6 +263,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -304,6 +319,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -335,6 +351,7 @@ CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_OF_PARTS is not set # # User Modules And Translation Layers @@ -421,7 +438,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -429,12 +446,14 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y @@ -450,12 +469,12 @@ CONFIG_IDE_PROC_FS=y # CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y # # PCI IDE chipsets support # CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y @@ -486,7 +505,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_TRM290 is not set CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y CONFIG_IDE_ARCH_OBSOLETE_INIT=y # CONFIG_BLK_DEV_HD is not set @@ -532,6 +550,7 @@ CONFIG_PHYLIB=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -559,6 +578,7 @@ CONFIG_E100=y # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -570,7 +590,9 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -597,6 +619,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -609,7 +632,6 @@ CONFIG_NETDEV_10000=y # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -652,6 +674,7 @@ CONFIG_INPUT=y # # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -725,14 +748,12 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -CONFIG_SENSORS_DS1337=y -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_M41T00 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -757,6 +778,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -786,6 +808,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set @@ -795,9 +818,11 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set CONFIG_HWMON_DEBUG_CHIP=y +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -850,16 +875,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -885,12 +908,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -943,8 +964,10 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1002,9 +1025,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -1018,6 +1038,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1028,5 +1049,49 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_SEQIV is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig index 1aff35f0c53a..cbf6ad2d71da 100644 --- a/arch/powerpc/configs/tqm8541_defconfig +++ b/arch/powerpc/configs/85xx/tqm8541_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc8 -# Fri Jan 25 01:31:28 2008 +# Linux kernel version: 2.6.25-rc6 +# Mon Mar 24 08:48:44 2008 # # CONFIG_PPC64 is not set @@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set -CONFIG_85xx=y CONFIG_E500=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y +CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set @@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -67,17 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -89,11 +92,13 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -101,6 +106,12 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -124,15 +135,17 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set +CONFIG_MPC85xx=y # CONFIG_MPC8540_ADS is not set # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set @@ -143,8 +156,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_TQM8541=y # CONFIG_TQM8555 is not set # CONFIG_TQM8560 is not set +# CONFIG_SBC8548 is not set +# CONFIG_SBC8560 is not set CONFIG_TQM85xx=y -CONFIG_MPC85xx=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -174,13 +188,17 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -199,11 +217,7 @@ CONFIG_VIRT_TO_BUS=y # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="tqm8541.dts" CONFIG_ISA_DMA_API=y # @@ -250,6 +264,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -305,6 +320,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -336,6 +352,7 @@ CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_OF_PARTS is not set # # User Modules And Translation Layers @@ -422,7 +439,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -430,12 +447,14 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y @@ -451,12 +470,12 @@ CONFIG_IDE_PROC_FS=y # CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y # # PCI IDE chipsets support # CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y @@ -487,7 +506,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_TRM290 is not set CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y CONFIG_IDE_ARCH_OBSOLETE_INIT=y # CONFIG_BLK_DEV_HD is not set @@ -533,6 +551,7 @@ CONFIG_PHYLIB=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -560,6 +579,7 @@ CONFIG_E100=y # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -572,7 +592,9 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -599,6 +621,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -611,7 +634,6 @@ CONFIG_NETDEV_10000=y # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -654,6 +676,7 @@ CONFIG_INPUT=y # # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -735,14 +758,12 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -CONFIG_SENSORS_DS1337=y -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_M41T00 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -767,6 +788,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -796,6 +818,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set @@ -805,9 +828,11 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set CONFIG_HWMON_DEBUG_CHIP=y +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -860,16 +885,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -895,12 +918,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -953,8 +974,10 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1012,9 +1035,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -1028,6 +1048,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set # CONFIG_KGDB_CONSOLE is not set @@ -1039,6 +1060,50 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_SEQIV is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig index a3af2262128b..bbff962c8472 100644 --- a/arch/powerpc/configs/tqm8555_defconfig +++ b/arch/powerpc/configs/85xx/tqm8555_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc8 -# Fri Jan 25 01:15:24 2008 +# Linux kernel version: 2.6.25-rc6 +# Mon Mar 24 08:48:44 2008 # # CONFIG_PPC64 is not set @@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set -CONFIG_85xx=y CONFIG_E500=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y +CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set @@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -67,17 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -89,11 +92,13 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -101,6 +106,12 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -124,15 +135,17 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set +CONFIG_MPC85xx=y # CONFIG_MPC8540_ADS is not set # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set @@ -143,8 +156,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_TQM8541 is not set CONFIG_TQM8555=y # CONFIG_TQM8560 is not set +# CONFIG_SBC8548 is not set +# CONFIG_SBC8560 is not set CONFIG_TQM85xx=y -CONFIG_MPC85xx=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -174,13 +188,17 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -199,11 +217,7 @@ CONFIG_VIRT_TO_BUS=y # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="tqm8555.dts" CONFIG_ISA_DMA_API=y # @@ -250,6 +264,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -305,6 +320,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -336,6 +352,7 @@ CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_OF_PARTS is not set # # User Modules And Translation Layers @@ -422,7 +439,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -430,12 +447,14 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y @@ -451,12 +470,12 @@ CONFIG_IDE_PROC_FS=y # CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y # # PCI IDE chipsets support # CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y @@ -487,7 +506,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_TRM290 is not set CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y CONFIG_IDE_ARCH_OBSOLETE_INIT=y # CONFIG_BLK_DEV_HD is not set @@ -533,6 +551,7 @@ CONFIG_PHYLIB=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -560,6 +579,7 @@ CONFIG_E100=y # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -572,7 +592,9 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -599,6 +621,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -611,7 +634,6 @@ CONFIG_NETDEV_10000=y # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -654,6 +676,7 @@ CONFIG_INPUT=y # # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -735,14 +758,12 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -CONFIG_SENSORS_DS1337=y -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_M41T00 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -767,6 +788,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -796,6 +818,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set @@ -805,9 +828,11 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set CONFIG_HWMON_DEBUG_CHIP=y +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -860,16 +885,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -895,12 +918,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -953,8 +974,10 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1012,9 +1035,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -1028,6 +1048,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set # CONFIG_KGDB_CONSOLE is not set @@ -1039,6 +1060,50 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_SEQIV is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig index 0832e8996ac2..63c5ec8b6515 100644 --- a/arch/powerpc/configs/tqm8560_defconfig +++ b/arch/powerpc/configs/85xx/tqm8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc8 -# Thu Jan 24 23:50:42 2008 +# Linux kernel version: 2.6.25-rc6 +# Mon Mar 24 08:48:45 2008 # # CONFIG_PPC64 is not set @@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set -CONFIG_85xx=y CONFIG_E500=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y +CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set @@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -67,17 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -89,11 +92,13 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -101,6 +106,12 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -124,15 +135,17 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set +CONFIG_MPC85xx=y # CONFIG_MPC8540_ADS is not set # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set @@ -143,8 +156,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_TQM8541 is not set # CONFIG_TQM8555 is not set CONFIG_TQM8560=y +# CONFIG_SBC8548 is not set +# CONFIG_SBC8560 is not set CONFIG_TQM85xx=y -CONFIG_MPC85xx=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -174,13 +188,17 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -199,11 +217,7 @@ CONFIG_VIRT_TO_BUS=y # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="tqm8560.dts" CONFIG_ISA_DMA_API=y # @@ -250,6 +264,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -305,6 +320,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -336,6 +352,7 @@ CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_OF_PARTS is not set # # User Modules And Translation Layers @@ -422,7 +439,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -430,12 +447,14 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y @@ -451,12 +470,12 @@ CONFIG_IDE_PROC_FS=y # CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y # # PCI IDE chipsets support # CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y @@ -487,7 +506,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_TRM290 is not set CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y CONFIG_IDE_ARCH_OBSOLETE_INIT=y # CONFIG_BLK_DEV_HD is not set @@ -533,6 +551,7 @@ CONFIG_PHYLIB=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -560,6 +579,7 @@ CONFIG_E100=y # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -572,7 +592,9 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -599,6 +621,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -611,7 +634,6 @@ CONFIG_NETDEV_10000=y # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -654,6 +676,7 @@ CONFIG_INPUT=y # # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -735,14 +758,12 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -CONFIG_SENSORS_DS1337=y -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_M41T00 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -767,6 +788,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -796,6 +818,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set @@ -805,9 +828,11 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set CONFIG_HWMON_DEBUG_CHIP=y +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -860,16 +885,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -895,12 +918,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -953,8 +974,10 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1012,9 +1035,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -1028,6 +1048,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set # CONFIG_KGDB_CONSOLE is not set @@ -1039,6 +1060,50 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_SEQIV is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/adder875-uboot_defconfig b/arch/powerpc/configs/adder875-uboot_defconfig deleted file mode 100644 index 1faf7ef59a23..000000000000 --- a/arch/powerpc/configs/adder875-uboot_defconfig +++ /dev/null @@ -1,798 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc6 -# Thu Jan 17 16:17:18 2008 -# -# CONFIG_PPC64 is not set - -# -# Processor support -# -# CONFIG_6xx is not set -# CONFIG_PPC_85xx is not set -CONFIG_PPC_8xx=y -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_E200 is not set -CONFIG_8xx=y -# CONFIG_PPC_MM_SLICES is not set -CONFIG_NOT_COHERENT_CACHE=y -CONFIG_PPC32=y -CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y -CONFIG_MMU=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_IRQ_PER_CPU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_ARCH_HAS_ILOG2_U32=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -# CONFIG_ARCH_NO_VIRT_TO_BUS is not set -CONFIG_PPC=y -CONFIG_EARLY_PRINTK=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_PPC_OF=y -CONFIG_OF=y -# CONFIG_PPC_UDBG_16550 is not set -# CONFIG_GENERIC_TBSYNC is not set -CONFIG_AUDIT_ARCH=y -CONFIG_GENERIC_BUG=y -# CONFIG_DEFAULT_UIMAGE is not set -CONFIG_REDBOOT=y -# CONFIG_PPC_DCR_NATIVE is not set -# CONFIG_PPC_DCR_MMIO is not set -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -# CONFIG_ELF_CORE is not set -# CONFIG_BASE_FULL is not set -# CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -# CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLUB_DEBUG=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=1 -# CONFIG_MODULES is not set -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -# CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set -CONFIG_DEFAULT_DEADLINE=y -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="deadline" - -# -# Platform support -# -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -CONFIG_CPM1=y -# CONFIG_MPC8XXFADS is not set -# CONFIG_MPC86XADS is not set -# CONFIG_MPC885ADS is not set -# CONFIG_PPC_EP88XC is not set -CONFIG_PPC_ADDER875=y - -# -# MPC8xx CPM Options -# - -# -# Generic MPC8xx Options -# -CONFIG_8xx_COPYBACK=y -# CONFIG_8xx_CPU6 is not set -CONFIG_8xx_CPU15=y -CONFIG_NO_UCODE_PATCH=y -# CONFIG_USB_SOF_UCODE_PATCH is not set -# CONFIG_I2C_SPI_UCODE_PATCH is not set -# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set -# CONFIG_PQ2ADS is not set -# CONFIG_MPIC is not set -# CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set -CONFIG_PPC_CPM_NEW_BINDING=y -# CONFIG_FSL_ULI1575 is not set -CONFIG_CPM=y - -# -# Kernel options -# -# CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set -# CONFIG_NO_HZ is not set -# CONFIG_HIGH_RES_TIMERS is not set -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_100 is not set -# CONFIG_HZ_250 is not set -# CONFIG_HZ_300 is not set -CONFIG_HZ_1000=y -CONFIG_HZ=1000 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_MATH_EMULATION is not set -# CONFIG_8XX_MINIMAL_FPEMU is not set -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -# CONFIG_PROC_DEVICETREE is not set -# CONFIG_CMDLINE_BOOL is not set -# CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y -# CONFIG_SECCOMP is not set -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="adder875-uboot.dts" -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_ZONE_DMA=y -CONFIG_FSL_SOC=y -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS is not set -# CONFIG_PCI_SYSCALL is not set -# CONFIG_PCI_QSPAN is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCCARD is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_CONSISTENT_START=0xfd000000 -CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -# CONFIG_MTD_PARTITIONS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_PHYSMAP_OF=y -# CONFIG_MTD_CFI_FLAGADM is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -CONFIG_OF_DEVICE=y -# CONFIG_PARPORT is not set -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -# CONFIG_MACINTOSH_DRIVERS is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -CONFIG_DAVICOM_PHY=y -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -# CONFIG_VITESSE_PHY is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set -CONFIG_FS_ENET=y -# CONFIG_FS_ENET_HAS_SCC is not set -CONFIG_FS_ENET_HAS_FEC=y -CONFIG_FS_ENET_MDIO_FEC=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -CONFIG_MOUSE_PS2_ALPS=y -CONFIG_MOUSE_PS2_LOGIPS2PP=y -CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y -CONFIG_MOUSE_PS2_TRACKPOINT=y -# CONFIG_MOUSE_PS2_TOUCHKIT is not set -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_UARTLITE is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_CPM=y -CONFIG_SERIAL_CPM_CONSOLE=y -# CONFIG_SERIAL_CPM_SCC1 is not set -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -CONFIG_SERIAL_CPM_SMC1=y -CONFIG_SERIAL_CPM_SMC2=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=y -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_EDAC is not set -# CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# -# CONFIG_UIO is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_INOTIFY is not set -# CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -# CONFIG_PROC_KCORE is not set -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -# CONFIG_NLS is not set -# CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -# CONFIG_CRC32 is not set -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_SAMPLES is not set -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set -# CONFIG_BDI_SWITCH is not set -# CONFIG_PPC_EARLY_DEBUG is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set -# CONFIG_PPC_CLOCK is not set -CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/adder875-redboot_defconfig b/arch/powerpc/configs/adder875_defconfig index cab5f9b64567..a3cc94a2ff06 100644 --- a/arch/powerpc/configs/adder875-redboot_defconfig +++ b/arch/powerpc/configs/adder875_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc6 -# Thu Jan 17 16:17:38 2008 +# Linux kernel version: 2.6.25-rc2 +# Wed Feb 20 12:26:07 2008 # # CONFIG_PPC64 is not set @@ -26,6 +26,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -64,17 +65,18 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -87,11 +89,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set +CONFIG_COMPAT_BRK=y # CONFIG_BASE_FULL is not set # CONFIG_FUTEX is not set CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y # CONFIG_VM_EVENT_COUNTERS is not set @@ -99,6 +103,12 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set @@ -120,12 +130,14 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_RCU is not set # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set CONFIG_CPM1=y @@ -150,6 +162,7 @@ CONFIG_NO_UCODE_PATCH=y # CONFIG_I2C_SPI_UCODE_PATCH is not set # CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set # CONFIG_PQ2ADS is not set +# CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -160,7 +173,6 @@ CONFIG_NO_UCODE_PATCH=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set CONFIG_PPC_CPM_NEW_BINDING=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -178,14 +190,19 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_8XX_MINIMAL_FPEMU is not set +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -204,11 +221,7 @@ CONFIG_VIRT_TO_BUS=y # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y # CONFIG_SECCOMP is not set -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="adder875-redboot.dts" CONFIG_ISA_DMA_API=y # @@ -305,6 +318,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -411,6 +425,7 @@ CONFIG_OF_DEVICE=y # CONFIG_PARPORT is not set # CONFIG_BLK_DEV is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -445,6 +460,7 @@ CONFIG_DAVICOM_PHY=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -469,7 +485,6 @@ CONFIG_FS_ENET_MDIO_FEC=y # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -574,6 +589,7 @@ CONFIG_GEN_RTC=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set # @@ -614,6 +630,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set @@ -635,11 +652,9 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -682,8 +697,10 @@ CONFIG_TMPFS=y # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -730,7 +747,6 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -745,9 +761,6 @@ CONFIG_ZLIB_INFLATE=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -757,7 +770,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set @@ -766,6 +779,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set @@ -776,14 +790,15 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig index f3bde8c6c8c6..c420e47426f8 100644 --- a/arch/powerpc/configs/cell_defconfig +++ b/arch/powerpc/configs/cell_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:48:05 2007 +# Linux kernel version: 2.6.25-rc6 +# Thu Mar 20 10:31:04 2008 # CONFIG_PPC64=y @@ -28,6 +28,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -69,8 +70,6 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y @@ -79,13 +78,20 @@ CONFIG_CGROUPS=y # CONFIG_CGROUP_DEBUG is not set # CONFIG_CGROUP_NS is not set CONFIG_CPUSETS=y -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_USER_SCHED is not set +# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUP_CPUACCT is not set +# CONFIG_RESOURCE_COUNTERS is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_PROC_PID_CPUSET=y # CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -99,11 +105,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -111,6 +119,15 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -138,6 +155,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support @@ -148,8 +166,8 @@ CONFIG_PPC_MULTIPLATFORM=y # CONFIG_PPC_86xx is not set # CONFIG_PPC_PSERIES is not set # CONFIG_PPC_ISERIES is not set -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set # CONFIG_PPC_PASEMI is not set @@ -162,14 +180,14 @@ CONFIG_PPC_PS3=y # CONFIG_PS3_ADVANCED is not set CONFIG_PS3_HTAB_SIZE=20 # CONFIG_PS3_DYNAMIC_DMA is not set -CONFIG_PS3_USE_LPAR_ADDR=y CONFIG_PS3_VUART=y CONFIG_PS3_PS3AV=y -CONFIG_PS3_SYS_MANAGER=m +CONFIG_PS3_SYS_MANAGER=y CONFIG_PS3_STORAGE=y CONFIG_PS3_DISK=y CONFIG_PS3_ROM=m CONFIG_PS3_FLASH=m +CONFIG_PS3_LPM=m CONFIG_PPC_CELL=y CONFIG_PPC_CELL_NATIVE=y CONFIG_PPC_IBM_CELL_BLADE=y @@ -183,10 +201,12 @@ CONFIG_CBE_RAS=y CONFIG_CBE_THERM=m CONFIG_CBE_CPUFREQ=m CONFIG_CBE_CPUFREQ_PMI=m +CONFIG_OPROFILE_CELL=y # CONFIG_PQ2ADS is not set CONFIG_PPC_NATIVE=y CONFIG_UDBG_RTAS_CONSOLE=y CONFIG_PPC_UDBG_BEAT=y +# CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -219,7 +239,6 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y # # CPU Frequency drivers # -# CONFIG_CPM2 is not set CONFIG_AXON_RAM=m # CONFIG_FSL_ULI1575 is not set @@ -235,16 +254,20 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y CONFIG_BINFMT_ELF=y +CONFIG_COMPAT_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_FORCE_MAX_ZONEORDER=9 CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y # CONFIG_IOMMU_VMERGE is not set +CONFIG_IOMMU_HELPER=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y @@ -267,6 +290,7 @@ CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_VMEMMAP=y CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTPLUG_SPARSE=y +CONFIG_MEMORY_HOTREMOVE=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y @@ -276,12 +300,12 @@ CONFIG_ARCH_MEMORY_PROBE=y CONFIG_NODES_SPAN_OTHER_NODES=y CONFIG_PPC_HAS_HASH_64K=y CONFIG_PPC_64K_PAGES=y +# CONFIG_PPC_SUBPAGE_PROT is not set CONFIG_SCHED_SMT=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set CONFIG_SECCOMP=y -# CONFIG_WANT_DEVICE_TREE is not set CONFIG_ISA_DMA_API=y # @@ -318,6 +342,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -368,6 +393,7 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration @@ -375,7 +401,6 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m -# CONFIG_NF_CONNTRACK_ENABLED is not set # CONFIG_NF_CONNTRACK is not set CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m @@ -383,20 +408,25 @@ CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_RATEEST=m # CONFIG_NETFILTER_XT_TARGET_TRACE is not set CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m @@ -411,20 +441,16 @@ CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_RAW=m @@ -433,7 +459,7 @@ CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # -# IPv6: Netfilter Configuration (EXPERIMENTAL) +# IPv6: Netfilter Configuration # # CONFIG_IP6_NF_QUEUE is not set # CONFIG_IP6_NF_IPTABLES is not set @@ -459,6 +485,7 @@ CONFIG_NET_CLS_ROUTE=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -467,7 +494,7 @@ CONFIG_NET_CLS_ROUTE=y # Wireless # # CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set +CONFIG_WIRELESS_EXT=y # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set @@ -505,7 +532,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -513,11 +540,13 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y @@ -534,12 +563,12 @@ CONFIG_IDE_PROC_FS=y # CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y # # PCI IDE chipsets support # CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y @@ -571,7 +600,6 @@ CONFIG_BLK_DEV_SIIMAGE=y # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_CELLEB=y -# CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y CONFIG_IDE_ARCH_OBSOLETE_INIT=y # CONFIG_BLK_DEV_HD is not set @@ -637,6 +665,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -689,6 +718,7 @@ CONFIG_SATA_PROMISE=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set @@ -703,6 +733,7 @@ CONFIG_PATA_PDC2027X=m # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set # CONFIG_PATA_SCC is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m @@ -748,7 +779,6 @@ CONFIG_MACVLAN=m # CONFIG_EQUALIZER is not set CONFIG_TUN=y # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -773,6 +803,9 @@ CONFIG_E1000=m CONFIG_E1000_NAPI=y # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -788,6 +821,7 @@ CONFIG_TIGON3=y # CONFIG_BNX2 is not set CONFIG_SPIDER_NET=y CONFIG_GELIC_NET=m +CONFIG_GELIC_WIRELESS=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set CONFIG_NETDEV_10000=y @@ -802,6 +836,7 @@ CONFIG_NETDEV_10000=y # CONFIG_PASEMI_MAC is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -824,7 +859,6 @@ CONFIG_NETDEV_10000=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -883,16 +917,17 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_DIGIEPCA is not set # CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set -# CONFIG_MOXA_SMARTIO_NEW is not set # CONFIG_ISI is not set # CONFIG_SYNCLINK is not set # CONFIG_SYNCLINKMP is not set # CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set +# CONFIG_RISCOM8 is not set # CONFIG_SPECIALIX is not set # CONFIG_SX is not set # CONFIG_RIO is not set # CONFIG_STALDRV is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -976,13 +1011,12 @@ CONFIG_I2C_ALGOBIT=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -998,6 +1032,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1082,6 +1117,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -1095,10 +1131,10 @@ CONFIG_USB_DEVICE_CLASS=y # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=m -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y +# CONFIG_USB_EHCI_HCD_PPC_OF is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=m CONFIG_USB_OHCI_HCD_PPC_OF=y @@ -1149,10 +1185,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1178,16 +1210,9 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set CONFIG_INFINIBAND=m CONFIG_INFINIBAND_USER_MAD=m @@ -1198,6 +1223,7 @@ CONFIG_INFINIBAND_MTHCA=m CONFIG_INFINIBAND_MTHCA_DEBUG=y # CONFIG_INFINIBAND_AMSO1100 is not set # CONFIG_MLX4_INFINIBAND is not set +# CONFIG_INFINIBAND_NES is not set CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_IPOIB_CM is not set CONFIG_INFINIBAND_IPOIB_DEBUG=y @@ -1211,7 +1237,9 @@ CONFIG_EDAC=y # # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_MM_EDAC=y +CONFIG_EDAC_CELL=y # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -1239,12 +1267,10 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=m # CONFIG_FUSE_FS is not set @@ -1293,8 +1319,10 @@ CONFIG_HUGETLB_PAGE=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1382,7 +1410,6 @@ CONFIG_NLS_ISO8859_15=m # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -1404,11 +1431,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -CONFIG_INSTRUMENTATION=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=m -# CONFIG_KPROBES is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -1427,6 +1449,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1439,9 +1462,9 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -# CONFIG_FORCED_INLINING is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -1464,7 +1487,9 @@ CONFIG_IRQSTACKS=y # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_BLKCIPHER=m +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y @@ -1483,6 +1508,9 @@ CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=m # CONFIG_CRYPTO_FCRYPT is not set @@ -1497,11 +1525,14 @@ CONFIG_CRYPTO_DES=m # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set CONFIG_CRYPTO_DEFLATE=m # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_AUTHENC=m +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/celleb_defconfig b/arch/powerpc/configs/celleb_defconfig index 9ed2e098f96f..9ba3c6fc2fef 100644 --- a/arch/powerpc/configs/celleb_defconfig +++ b/arch/powerpc/configs/celleb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:48:07 2007 +# Linux kernel version: 2.6.25-rc6 +# Thu Mar 20 10:32:45 2008 # CONFIG_PPC64=y @@ -28,6 +28,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -69,16 +70,22 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=15 # CONFIG_CGROUPS is not set -# CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_USER_SCHED is not set +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -92,11 +99,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -104,6 +113,14 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -131,6 +148,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support @@ -141,8 +159,8 @@ CONFIG_PPC_MULTIPLATFORM=y # CONFIG_PPC_86xx is not set # CONFIG_PPC_PSERIES is not set # CONFIG_PPC_ISERIES is not set -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set # CONFIG_PPC_PASEMI is not set @@ -164,6 +182,7 @@ CONFIG_CBE_RAS=y CONFIG_PPC_NATIVE=y CONFIG_UDBG_RTAS_CONSOLE=y CONFIG_PPC_UDBG_BEAT=y +# CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -177,7 +196,6 @@ CONFIG_PPC_RTAS=y CONFIG_PPC_INDIRECT_IO=y CONFIG_GENERIC_IOMAP=y # CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -192,16 +210,20 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y CONFIG_BINFMT_ELF=y +CONFIG_COMPAT_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y # CONFIG_IOMMU_VMERGE is not set +CONFIG_IOMMU_HELPER=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set # CONFIG_IRQ_ALL_CPUS is not set @@ -223,6 +245,7 @@ CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_VMEMMAP=y CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTPLUG_SPARSE=y +# CONFIG_MEMORY_HOTREMOVE is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y @@ -237,7 +260,6 @@ CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set CONFIG_SECCOMP=y -# CONFIG_WANT_DEVICE_TREE is not set CONFIG_ISA_DMA_API=y # @@ -273,6 +295,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -320,12 +343,13 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set @@ -337,7 +361,7 @@ CONFIG_IP_NF_QUEUE=m # CONFIG_IP_NF_ARPTABLES is not set # -# IPv6: Netfilter Configuration (EXPERIMENTAL) +# IPv6: Netfilter Configuration # # CONFIG_IP6_NF_QUEUE is not set # CONFIG_IP6_NF_IPTABLES is not set @@ -362,6 +386,7 @@ CONFIG_IP_NF_QUEUE=m # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -408,7 +433,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -416,16 +441,19 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y CONFIG_BLK_DEV_IDECD=m +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set @@ -437,12 +465,12 @@ CONFIG_IDE_PROC_FS=y # CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y # # PCI IDE chipsets support # CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y @@ -474,7 +502,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_CELLEB=y -# CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y CONFIG_IDE_ARCH_OBSOLETE_INIT=y # CONFIG_BLK_DEV_HD is not set @@ -540,6 +567,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -589,7 +617,6 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -612,6 +639,9 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -638,6 +668,7 @@ CONFIG_NETDEV_10000=y # CONFIG_PASEMI_MAC is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -660,7 +691,6 @@ CONFIG_NETDEV_10000=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -719,16 +749,17 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_DIGIEPCA is not set # CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set -# CONFIG_MOXA_SMARTIO_NEW is not set # CONFIG_ISI is not set # CONFIG_SYNCLINK is not set # CONFIG_SYNCLINKMP is not set # CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set +# CONFIG_RISCOM8 is not set # CONFIG_SPECIALIX is not set # CONFIG_SX is not set # CONFIG_RIO is not set # CONFIG_STALDRV is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -802,13 +833,12 @@ CONFIG_I2C_ALGOBIT=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -824,6 +854,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -905,6 +936,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -918,10 +950,10 @@ CONFIG_USB_DEVICEFS=y # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=m -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y +# CONFIG_USB_EHCI_HCD_PPC_OF is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_HCD_PPC_OF is not set @@ -969,10 +1001,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -998,20 +1026,14 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -1041,12 +1063,10 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1095,8 +1115,10 @@ CONFIG_HUGETLB_PAGE=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1188,7 +1210,6 @@ CONFIG_NLS_ISO8859_15=m # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -1206,10 +1227,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_KPROBES is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -1228,6 +1245,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1240,9 +1258,9 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -# CONFIG_FORCED_INLINING is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -1265,7 +1283,9 @@ CONFIG_IRQSTACKS=y # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_BLKCIPHER=m +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y @@ -1284,6 +1304,9 @@ CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=m # CONFIG_CRYPTO_FCRYPT is not set @@ -1299,11 +1322,13 @@ CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_TEST=m -# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_AUTHENC=m +# CONFIG_CRYPTO_LZO is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig index 5989b5d2277e..d7fd298bd234 100644 --- a/arch/powerpc/configs/chrp32_defconfig +++ b/arch/powerpc/configs/chrp32_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:48:09 2007 +# Linux kernel version: 2.6.25-rc6 +# Thu Mar 27 13:55:37 2008 # # CONFIG_PPC64 is not set @@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -67,16 +68,20 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=15 # CONFIG_CGROUPS is not set -# CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -90,11 +95,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -102,6 +109,14 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -130,6 +145,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support @@ -140,16 +156,17 @@ CONFIG_PPC_MULTIPLATFORM=y # CONFIG_PPC_86xx is not set CONFIG_CLASSIC32=y CONFIG_PPC_CHRP=y +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set +# CONFIG_MPC5121_ADS is not set # CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set -# CONFIG_PPC_EFIKA is not set -# CONFIG_PPC_LITE5200 is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set CONFIG_PPC_NATIVE=y # CONFIG_UDBG_RTAS_CONSOLE is not set +# CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set CONFIG_PPC_I8259=y @@ -163,7 +180,6 @@ CONFIG_PPC_MPC106=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_TAU is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -179,13 +195,16 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set CONFIG_IRQ_ALL_CPUS=y CONFIG_ARCH_FLATMEM_ENABLE=y @@ -207,7 +226,6 @@ CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set CONFIG_SECCOMP=y -# CONFIG_WANT_DEVICE_TREE is not set CONFIG_ISA_DMA_API=y # @@ -223,7 +241,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -286,74 +304,32 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_ADVANCED is not set # # Core Netfilter Configuration # -# CONFIG_NETFILTER_NETLINK is not set -CONFIG_NF_CONNTRACK_ENABLED=m +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_LOG=m CONFIG_NF_CONNTRACK=m -# CONFIG_NF_CT_ACCT is not set -# CONFIG_NF_CONNTRACK_MARK is not set -# CONFIG_NF_CONNTRACK_EVENTS is not set -# CONFIG_NF_CT_PROTO_SCTP is not set -# CONFIG_NF_CT_PROTO_UDPLITE is not set -# CONFIG_NF_CONNTRACK_AMANDA is not set CONFIG_NF_CONNTRACK_FTP=m -# CONFIG_NF_CONNTRACK_H323 is not set CONFIG_NF_CONNTRACK_IRC=m -# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set -# CONFIG_NF_CONNTRACK_PPTP is not set -# CONFIG_NF_CONNTRACK_SANE is not set CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m CONFIG_NETFILTER_XTABLES=m -# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set -# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set -# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set # CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set -# CONFIG_NETFILTER_XT_MATCH_DCCP is not set -# CONFIG_NETFILTER_XT_MATCH_DSCP is not set -# CONFIG_NETFILTER_XT_MATCH_ESP is not set -# CONFIG_NETFILTER_XT_MATCH_HELPER is not set -# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set -# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set -# CONFIG_NETFILTER_XT_MATCH_MAC is not set # CONFIG_NETFILTER_XT_MATCH_MARK is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set -# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set -# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set -# CONFIG_NETFILTER_XT_MATCH_REALM is not set -# CONFIG_NETFILTER_XT_MATCH_SCTP is not set # CONFIG_NETFILTER_XT_MATCH_STATE is not set -# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set -# CONFIG_NETFILTER_XT_MATCH_STRING is not set -# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_TIME is not set -# CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # # IP: Netfilter Configuration # CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y -# CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=m -# CONFIG_IP_NF_MATCH_IPRANGE is not set -# CONFIG_IP_NF_MATCH_TOS is not set -# CONFIG_IP_NF_MATCH_RECENT is not set -# CONFIG_IP_NF_MATCH_ECN is not set -# CONFIG_IP_NF_MATCH_AH is not set -# CONFIG_IP_NF_MATCH_TTL is not set -# CONFIG_IP_NF_MATCH_OWNER is not set -# CONFIG_IP_NF_MATCH_ADDRTYPE is not set CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -361,20 +337,14 @@ CONFIG_IP_NF_TARGET_LOG=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -# CONFIG_IP_NF_TARGET_NETMAP is not set -# CONFIG_IP_NF_TARGET_SAME is not set -# CONFIG_NF_NAT_SNMP_BASIC is not set CONFIG_NF_NAT_FTP=m CONFIG_NF_NAT_IRC=m -CONFIG_NF_NAT_TFTP=m +# CONFIG_NF_NAT_TFTP is not set # CONFIG_NF_NAT_AMANDA is not set # CONFIG_NF_NAT_PPTP is not set # CONFIG_NF_NAT_H323 is not set CONFIG_NF_NAT_SIP=m # CONFIG_IP_NF_MANGLE is not set -# CONFIG_IP_NF_RAW is not set -# CONFIG_IP_NF_ARPTABLES is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set @@ -396,6 +366,7 @@ CONFIG_NF_NAT_SIP=m # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -445,7 +416,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -453,16 +424,19 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set @@ -474,12 +448,12 @@ CONFIG_IDE_PROC_FS=y # CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y # # PCI IDE chipsets support # CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y @@ -510,7 +484,6 @@ CONFIG_BLK_DEV_SL82C105=y # CONFIG_BLK_DEV_TRM290 is not set CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set # # Other IDE chipsets support @@ -599,6 +572,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_STEX is not set CONFIG_SCSI_SYM53C8XX_2=y @@ -607,7 +581,6 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_SYM53C8XX_MMIO=y # CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set @@ -640,7 +613,6 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -688,6 +660,7 @@ CONFIG_8139TOO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -701,6 +674,9 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -726,6 +702,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -758,7 +735,6 @@ CONFIG_PPPOE=m # CONFIG_SLIP is not set CONFIG_SLHC=m # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -838,6 +814,7 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -917,14 +894,12 @@ CONFIG_I2C_ALGOBIT=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_M41T00 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -940,6 +915,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -1083,6 +1059,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -1096,9 +1073,9 @@ CONFIG_USB_DEVICE_CLASS=y # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=m -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EHCI_HCD_PPC_OF is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_PPC_OF is not set @@ -1147,10 +1124,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1176,20 +1149,14 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -1215,12 +1182,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1267,8 +1232,10 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1342,7 +1309,6 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -1360,10 +1326,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_KPROBES is not set -# CONFIG_MARKERS is not set +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1382,6 +1345,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1395,9 +1359,9 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -1420,6 +1384,7 @@ CONFIG_XMON_DISASSEMBLY=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=m CONFIG_CRYPTO_BLKCIPHER=m +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=m # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set @@ -1437,6 +1402,9 @@ CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_FCRYPT is not set @@ -1451,11 +1419,13 @@ CONFIG_CRYPTO_ARC4=m # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig index 01ad5951ade9..2b1504e0a111 100644 --- a/arch/powerpc/configs/ep8248e_defconfig +++ b/arch/powerpc/configs/ep8248e_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc6 -# Fri Jan 11 14:02:06 2008 +# Linux kernel version: 2.6.25-rc6 +# Mon Mar 24 08:48:09 2008 # # CONFIG_PPC64 is not set @@ -28,6 +28,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -69,11 +70,14 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -85,17 +89,26 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -117,6 +130,7 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" +CONFIG_CLASSIC_RCU=y # # Platform support @@ -125,8 +139,8 @@ CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_PPC_82xx=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_MPC8272_ADS is not set @@ -135,6 +149,7 @@ CONFIG_EP8248E=y # CONFIG_PQ2ADS is not set CONFIG_8260=y CONFIG_8272=y +# CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -163,12 +178,16 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y @@ -183,11 +202,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y # CONFIG_SECCOMP is not set -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="ep8248e.dts" CONFIG_ISA_DMA_API=y # @@ -272,12 +287,13 @@ CONFIG_IPV6_SIT=y # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set @@ -287,6 +303,13 @@ CONFIG_NETFILTER=y # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set + +# +# IPv6: Netfilter Configuration +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set @@ -300,6 +323,7 @@ CONFIG_NETFILTER=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -308,6 +332,7 @@ CONFIG_NETFILTER=y # # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set @@ -415,6 +440,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -448,6 +474,7 @@ CONFIG_DAVICOM_PHY=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set CONFIG_MDIO_BITBANG=y CONFIG_NET_ETHERNET=y @@ -462,6 +489,8 @@ CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_FCC=y # CONFIG_FS_ENET_MDIO_FCC is not set CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set +# CONFIG_GIANFAR is not set CONFIG_NETDEV_10000=y # @@ -532,6 +561,7 @@ CONFIG_HW_RANDOM=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -571,8 +601,10 @@ CONFIG_DAB=y # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -593,12 +625,10 @@ CONFIG_JBD=y # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -626,6 +656,7 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -634,8 +665,10 @@ CONFIG_TMPFS=y # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -715,7 +748,6 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y -# CONFIG_UCC_SLOW is not set # # Library routines @@ -731,9 +763,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -764,8 +793,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -784,6 +813,7 @@ CONFIG_BDI_SWITCH=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_NULL is not set @@ -797,6 +827,9 @@ CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -816,6 +849,7 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig index a1f98200d9e3..125b4764aadd 100644 --- a/arch/powerpc/configs/ep88xc_defconfig +++ b/arch/powerpc/configs/ep88xc_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:48:13 2007 +# Linux kernel version: 2.6.25-rc6 +# Mon Mar 24 08:48:10 2008 # # CONFIG_PPC64 is not set @@ -26,6 +26,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -63,15 +64,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -84,11 +89,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set +CONFIG_COMPAT_BRK=y # CONFIG_BASE_FULL is not set # CONFIG_FUTEX is not set CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y # CONFIG_VM_EVENT_COUNTERS is not set @@ -96,6 +103,13 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set @@ -117,12 +131,13 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" +CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set CONFIG_CPM1=y @@ -130,6 +145,7 @@ CONFIG_CPM1=y # CONFIG_MPC86XADS is not set # CONFIG_MPC885ADS is not set CONFIG_PPC_EP88XC=y +# CONFIG_PPC_ADDER875 is not set # # MPC8xx CPM Options @@ -146,6 +162,7 @@ CONFIG_NO_UCODE_PATCH=y # CONFIG_I2C_SPI_UCODE_PATCH is not set # CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set # CONFIG_PQ2ADS is not set +# CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -156,7 +173,6 @@ CONFIG_NO_UCODE_PATCH=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set CONFIG_PPC_CPM_NEW_BINDING=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -174,6 +190,7 @@ CONFIG_HZ_100=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=100 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -181,7 +198,10 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set CONFIG_8XX_MINIMAL_FPEMU=y +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -200,11 +220,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y # CONFIG_SECCOMP is not set -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="ep88xc.dts" CONFIG_ISA_DMA_API=y # @@ -301,6 +317,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -407,6 +424,7 @@ CONFIG_OF_DEVICE=y # CONFIG_PARPORT is not set # CONFIG_BLK_DEV is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -441,6 +459,7 @@ CONFIG_LXT_PHY=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -465,7 +484,6 @@ CONFIG_FS_ENET_MDIO_FEC=y # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -528,6 +546,7 @@ CONFIG_GEN_RTC=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -567,9 +586,11 @@ CONFIG_DAB=y # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -588,11 +609,9 @@ CONFIG_DAB=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -635,8 +654,10 @@ CONFIG_TMPFS=y # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -683,7 +704,6 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -698,7 +718,6 @@ CONFIG_ZLIB_INFLATE=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -717,6 +736,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set @@ -727,8 +747,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index 3673dd23120c..a20501f89474 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:48:15 2007 +# Linux kernel version: 2.6.25-rc6 +# Thu Mar 27 13:55:43 2008 # CONFIG_PPC64=y @@ -27,6 +27,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -48,7 +49,9 @@ CONFIG_GENERIC_TBSYNC=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set -CONFIG_PPC64_SWSUSP=y +CONFIG_HIBERNATE_64=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set # CONFIG_PPC_OF_PLATFORM_PCI is not set @@ -68,18 +71,20 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=17 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -93,11 +98,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -105,6 +112,15 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -132,6 +148,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support @@ -142,8 +159,8 @@ CONFIG_PPC_MULTIPLATFORM=y # CONFIG_PPC_86xx is not set # CONFIG_PPC_PSERIES is not set # CONFIG_PPC_ISERIES is not set -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set CONFIG_PPC_PMAC=y CONFIG_PPC_PMAC64=y # CONFIG_PPC_MAPLE is not set @@ -155,6 +172,7 @@ CONFIG_PPC_PMAC64=y # CONFIG_PPC_IBM_CELL_BLADE is not set # CONFIG_PQ2ADS is not set CONFIG_PPC_NATIVE=y +# CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -185,7 +203,6 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=y # CPU Frequency drivers # CONFIG_CPU_FREQ_PMAC64=y -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -200,17 +217,21 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set CONFIG_BINFMT_ELF=y +CONFIG_COMPAT_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y CONFIG_IOMMU_VMERGE=y +CONFIG_IOMMU_HELPER=y # CONFIG_HOTPLUG_CPU is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y @@ -236,11 +257,9 @@ CONFIG_BOUNCE=y # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_ARCH_WANTS_FREEZER_CONTROL=y # CONFIG_PM is not set -CONFIG_SUSPEND_SMP_POSSIBLE=y -CONFIG_HIBERNATION_SMP_POSSIBLE=y CONFIG_SECCOMP=y -# CONFIG_WANT_DEVICE_TREE is not set CONFIG_ISA_DMA_API=y # @@ -255,7 +274,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -276,6 +295,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -310,12 +330,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # -# CONFIG_NETFILTER_NETLINK is not set -CONFIG_NF_CONNTRACK_ENABLED=m +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m CONFIG_NF_CONNTRACK=m # CONFIG_NF_CT_ACCT is not set CONFIG_NF_CONNTRACK_MARK=y @@ -331,6 +353,7 @@ CONFIG_NF_CONNTRACK_IRC=m # CONFIG_NF_CONNTRACK_SANE is not set # CONFIG_NF_CONNTRACK_SIP is not set CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m # CONFIG_NETFILTER_XTABLES is not set # @@ -363,6 +386,7 @@ CONFIG_LLC=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -409,7 +433,7 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -419,16 +443,19 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set @@ -440,12 +467,12 @@ CONFIG_IDE_PROC_FS=y # CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y # # PCI IDE chipsets support # CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set @@ -478,7 +505,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_IDE_PMAC=y CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y CONFIG_BLK_DEV_IDEDMA_PMAC=y -# CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y CONFIG_IDE_ARCH_OBSOLETE_INIT=y # CONFIG_BLK_DEV_HD is not set @@ -544,6 +570,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -596,6 +623,7 @@ CONFIG_SATA_SVW=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set @@ -610,6 +638,7 @@ CONFIG_SATA_SVW=y # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y @@ -676,7 +705,6 @@ CONFIG_BONDING=m # CONFIG_EQUALIZER is not set CONFIG_TUN=m # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -701,6 +729,9 @@ CONFIG_E1000=y # CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -726,6 +757,7 @@ CONFIG_NETDEV_10000=y # CONFIG_PASEMI_MAC is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set CONFIG_TR=y CONFIG_IBMOL=y # CONFIG_3C359 is not set @@ -771,7 +803,6 @@ CONFIG_PPPOE=m # CONFIG_SLIP is not set CONFIG_SLHC=m # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -834,6 +865,7 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -901,13 +933,12 @@ CONFIG_I2C_POWERMAC=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -923,6 +954,7 @@ CONFIG_I2C_POWERMAC=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -1083,6 +1115,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set @@ -1108,6 +1141,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set @@ -1125,6 +1159,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set @@ -1166,6 +1201,10 @@ CONFIG_SND_USB_AUDIO=m # # +# ALSA SoC audio for Freescale SOCs +# + +# # Open Sound System # # CONFIG_SOUND_PRIME is not set @@ -1192,6 +1231,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -1205,9 +1245,9 @@ CONFIG_USB_DEVICE_CLASS=y # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EHCI_HCD_PPC_OF is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y @@ -1259,11 +1299,8 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# CONFIG_USB_SERIAL=m +CONFIG_USB_EZUSB=y CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRCABLE is not set # CONFIG_USB_SERIAL_AIRPRIME is not set @@ -1284,6 +1321,7 @@ CONFIG_USB_SERIAL_EDGEPORT=m CONFIG_USB_SERIAL_EDGEPORT_TI=m CONFIG_USB_SERIAL_GARMIN=m CONFIG_USB_SERIAL_IPW=m +# CONFIG_USB_SERIAL_IUU is not set CONFIG_USB_SERIAL_KEYSPAN_PDA=m CONFIG_USB_SERIAL_KEYSPAN=m CONFIG_USB_SERIAL_KEYSPAN_MPR=y @@ -1316,7 +1354,6 @@ CONFIG_USB_SERIAL_XIRCOM=m # CONFIG_USB_SERIAL_OPTION is not set CONFIG_USB_SERIAL_OMNINET=m # CONFIG_USB_SERIAL_DEBUG is not set -CONFIG_USB_EZUSB=y # # USB Miscellaneous drivers @@ -1341,20 +1378,14 @@ CONFIG_USB_APPLEDISPLAY=m # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -1393,12 +1424,10 @@ CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1447,8 +1476,10 @@ CONFIG_HFSPLUS_FS=m # CONFIG_EFS_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1546,7 +1577,6 @@ CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -1564,11 +1594,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -CONFIG_INSTRUMENTATION=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=y -# CONFIG_KPROBES is not set -# CONFIG_MARKERS is not set +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1587,6 +1613,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1599,9 +1626,9 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -1621,7 +1648,9 @@ CONFIG_BOOTX_TEXT=y # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y @@ -1640,6 +1669,9 @@ CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -1655,11 +1687,13 @@ CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_TEST=m -# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_AUTHENC=m +# CONFIG_CRYPTO_LZO is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig index 4a87745c7803..b3128fb7ce7e 100644 --- a/arch/powerpc/configs/iseries_defconfig +++ b/arch/powerpc/configs/iseries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc3 -# Wed Nov 21 11:19:59 2007 +# Linux kernel version: 2.6.25-rc6 +# Thu Mar 27 13:55:45 2008 # CONFIG_PPC64=y @@ -28,6 +28,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -68,8 +69,6 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y CONFIG_AUDIT_TREE=y @@ -77,11 +76,15 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=17 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -95,11 +98,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -107,6 +112,14 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -134,6 +147,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support @@ -153,8 +167,8 @@ CONFIG_VIODASD=y CONFIG_VIOCD=m CONFIG_VIOTAPE=m CONFIG_VIOPATH=y -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set # CONFIG_PPC_PASEMI is not set @@ -164,6 +178,7 @@ CONFIG_VIOPATH=y # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_IBM_CELL_BLADE is not set # CONFIG_PQ2ADS is not set +# CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -176,7 +191,6 @@ CONFIG_IBMVIO=y CONFIG_PPC_INDIRECT_IO=y CONFIG_GENERIC_IOMAP=y # CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -191,15 +205,19 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set CONFIG_BINFMT_ELF=y +CONFIG_COMPAT_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y +CONFIG_IOMMU_HELPER=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y @@ -227,7 +245,6 @@ CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set CONFIG_SECCOMP=y -# CONFIG_WANT_DEVICE_TREE is not set CONFIG_ISA_DMA_API=y # @@ -242,7 +259,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -263,6 +280,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m CONFIG_XFRM_SUB_POLICY=y # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -297,12 +315,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # -# CONFIG_NETFILTER_NETLINK is not set -CONFIG_NF_CONNTRACK_ENABLED=m +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m CONFIG_NF_CONNTRACK=m # CONFIG_NF_CT_ACCT is not set CONFIG_NF_CONNTRACK_MARK=y @@ -318,6 +338,7 @@ CONFIG_NF_CONNTRACK_IRC=m # CONFIG_NF_CONNTRACK_SANE is not set # CONFIG_NF_CONNTRACK_SIP is not set CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m @@ -326,8 +347,10 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set +CONFIG_NETFILTER_XT_TARGET_RATEEST=m # CONFIG_NETFILTER_XT_TARGET_TRACE is not set # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m # CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set # CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set @@ -337,14 +360,17 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DSCP=m # CONFIG_NETFILTER_XT_MATCH_ESP is not set # CONFIG_NETFILTER_XT_MATCH_HELPER is not set +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m # CONFIG_NETFILTER_XT_MATCH_POLICY is not set # CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m # CONFIG_NETFILTER_XT_MATCH_STATE is not set @@ -362,13 +388,10 @@ CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m # CONFIG_IP_NF_MATCH_AH is not set CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m @@ -379,7 +402,6 @@ CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m # CONFIG_NF_NAT_SNMP_BASIC is not set CONFIG_NF_NAT_FTP=m CONFIG_NF_NAT_IRC=m @@ -389,7 +411,6 @@ CONFIG_NF_NAT_TFTP=m # CONFIG_NF_NAT_H323 is not set # CONFIG_NF_NAT_SIP is not set CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_TARGET_CLUSTERIP=m @@ -425,6 +446,7 @@ CONFIG_NET_CLS_ROUTE=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -470,7 +492,7 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -478,6 +500,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -518,6 +542,7 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_ISCSI_ATTRS is not set CONFIG_SCSI_SAS_ATTRS=m CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SAS_HOST_SMP=y CONFIG_SCSI_SAS_LIBSAS_DEBUG=y CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_LOWLEVEL=y @@ -543,6 +568,7 @@ CONFIG_SCSI_LOWLEVEL=y CONFIG_SCSI_IBMVSCSI=m # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -589,7 +615,6 @@ CONFIG_BONDING=m # CONFIG_EQUALIZER is not set CONFIG_TUN=m # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -618,6 +643,7 @@ CONFIG_E100=y # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -631,6 +657,9 @@ CONFIG_E1000=m # CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -656,6 +685,7 @@ CONFIG_NETDEV_10000=y # CONFIG_PASEMI_MAC is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set CONFIG_TR=y CONFIG_IBMOL=y # CONFIG_3C359 is not set @@ -683,7 +713,6 @@ CONFIG_PPPOE=m # CONFIG_SLIP is not set CONFIG_SLHC=m # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y # CONFIG_NETCONSOLE_DYNAMIC is not set CONFIG_NETPOLL=y @@ -734,6 +763,7 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -772,6 +802,7 @@ CONFIG_DEVPORT=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -821,10 +852,12 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -869,12 +902,10 @@ CONFIG_GFS2_FS=m CONFIG_GFS2_FS_LOCKING_NOLOCK=m CONFIG_GFS2_FS_LOCKING_DLM=m # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -924,8 +955,10 @@ CONFIG_CONFIGFS_FS=m # CONFIG_EFS_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1009,7 +1042,6 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_UTF8 is not set CONFIG_DLM=m # CONFIG_DLM_DEBUG is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -1031,10 +1063,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_KPROBES is not set -# CONFIG_MARKERS is not set +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1053,6 +1082,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1065,9 +1095,9 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -# CONFIG_FORCED_INLINING is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set CONFIG_DEBUG_STACKOVERFLOW=y @@ -1089,6 +1119,7 @@ CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y @@ -1107,6 +1138,9 @@ CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -1122,11 +1156,13 @@ CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_SEED=m +# CONFIG_CRYPTO_SALSA20 is not set CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_AUTHENC=m +# CONFIG_CRYPTO_LZO is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig index 7b4280811fb9..22a943afc3c0 100644 --- a/arch/powerpc/configs/linkstation_defconfig +++ b/arch/powerpc/configs/linkstation_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:48:22 2007 +# Linux kernel version: 2.6.25-rc6 +# Mon Mar 24 08:48:10 2008 # # CONFIG_PPC64 is not set @@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -66,16 +67,24 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -89,11 +98,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -101,6 +112,14 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -128,6 +147,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support @@ -138,22 +158,24 @@ CONFIG_PPC_MULTIPLATFORM=y # CONFIG_PPC_86xx is not set CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set +# CONFIG_MPC5121_ADS is not set # CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set -# CONFIG_PPC_EFIKA is not set -# CONFIG_PPC_LITE5200 is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set CONFIG_EMBEDDED6xx=y CONFIG_LINKSTATION=y +# CONFIG_STORCENTER is not set # CONFIG_MPC7448HPC2 is not set # CONFIG_PPC_HOLLY is not set # CONFIG_PPC_PRPMC2800 is not set CONFIG_MPC10X_BRIDGE=y CONFIG_MPC10X_OPENPIC=y # CONFIG_MPC10X_STORE_GATHERING is not set +# CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -165,7 +187,6 @@ CONFIG_MPIC=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_TAU is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -181,12 +202,16 @@ CONFIG_HZ_100=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=100 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -206,10 +231,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y CONFIG_SECCOMP=y -# CONFIG_WANT_DEVICE_TREE is not set CONFIG_ISA_DMA_API=y # @@ -259,6 +281,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -295,12 +318,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # -# CONFIG_NETFILTER_NETLINK is not set -CONFIG_NF_CONNTRACK_ENABLED=m +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set CONFIG_NF_CONNTRACK=m # CONFIG_NF_CT_ACCT is not set # CONFIG_NF_CONNTRACK_MARK is not set @@ -317,6 +341,7 @@ CONFIG_NF_CONNTRACK_PPTP=m # CONFIG_NF_CONNTRACK_SANE is not set CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +# CONFIG_NF_CT_NETLINK is not set CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set @@ -325,8 +350,10 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set # CONFIG_NETFILTER_XT_TARGET_TRACE is not set # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set # CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set # CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set @@ -336,14 +363,17 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set # CONFIG_NETFILTER_XT_MATCH_HELPER is not set +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set CONFIG_NETFILTER_XT_MATCH_MAC=m # CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set # CONFIG_NETFILTER_XT_MATCH_POLICY is not set # CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set # CONFIG_NETFILTER_XT_MATCH_SCTP is not set CONFIG_NETFILTER_XT_MATCH_STATE=m @@ -361,13 +391,10 @@ CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -# CONFIG_IP_NF_MATCH_TOS is not set CONFIG_IP_NF_MATCH_RECENT=m # CONFIG_IP_NF_MATCH_ECN is not set # CONFIG_IP_NF_MATCH_AH is not set # CONFIG_IP_NF_MATCH_TTL is not set -CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m @@ -378,7 +405,6 @@ CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m # CONFIG_IP_NF_TARGET_NETMAP is not set -# CONFIG_IP_NF_TARGET_SAME is not set # CONFIG_NF_NAT_SNMP_BASIC is not set CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_FTP=m @@ -389,7 +415,6 @@ CONFIG_NF_NAT_PPTP=m CONFIG_NF_NAT_H323=m CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m # CONFIG_IP_NF_TARGET_CLUSTERIP is not set @@ -418,6 +443,7 @@ CONFIG_IP_NF_ARP_MANGLE=m # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -459,6 +485,7 @@ CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_OF_PARTS is not set # # User Modules And Translation Layers @@ -554,7 +581,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=2 CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -562,6 +589,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -626,6 +655,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -656,6 +686,7 @@ CONFIG_ATA=y # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set +# CONFIG_SATA_FSL is not set # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -679,6 +710,7 @@ CONFIG_PATA_IT821X=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set @@ -693,6 +725,7 @@ CONFIG_PATA_SIL680=y # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -711,7 +744,6 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set CONFIG_TUN=m # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -742,6 +774,9 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -754,6 +789,7 @@ CONFIG_R8169=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_GIANFAR is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set @@ -768,6 +804,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -790,7 +827,6 @@ CONFIG_NETDEV_10000=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y # CONFIG_NETCONSOLE_DYNAMIC is not set CONFIG_NETPOLL=y @@ -851,6 +887,7 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -924,14 +961,12 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set CONFIG_SENSORS_EEPROM=m # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_M41T00 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -956,6 +991,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -985,6 +1021,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set @@ -994,9 +1031,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -1063,6 +1102,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -1076,9 +1116,10 @@ CONFIG_USB_DEVICE_CLASS=y # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EHCI_FSL is not set +CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y @@ -1130,12 +1171,9 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# CONFIG_USB_SERIAL=y CONFIG_USB_SERIAL_CONSOLE=y +# CONFIG_USB_EZUSB is not set # CONFIG_USB_SERIAL_GENERIC is not set # CONFIG_USB_SERIAL_AIRCABLE is not set # CONFIG_USB_SERIAL_AIRPRIME is not set @@ -1156,6 +1194,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=y # CONFIG_USB_SERIAL_EDGEPORT_TI is not set # CONFIG_USB_SERIAL_GARMIN is not set # CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_KLSI is not set @@ -1199,16 +1238,9 @@ CONFIG_USB_SERIAL_FTDI_SIO=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set @@ -1240,6 +1272,7 @@ CONFIG_RTC_DRV_RS5C372=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set # # SPI RTC drivers @@ -1249,9 +1282,10 @@ CONFIG_RTC_DRV_RS5C372=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -1259,6 +1293,7 @@ CONFIG_RTC_DRV_RS5C372=y # # on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -1288,12 +1323,10 @@ CONFIG_XFS_FS=m # CONFIG_XFS_RT is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1344,8 +1377,10 @@ CONFIG_TMPFS=y # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1427,7 +1462,6 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -1447,7 +1481,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -1466,6 +1499,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1478,9 +1512,9 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -1500,6 +1534,7 @@ CONFIG_FORCED_INLINING=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set @@ -1517,6 +1552,9 @@ CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -1532,11 +1570,14 @@ CONFIG_CRYPTO_ARC4=m # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig index 8b810d056440..7a166a39d92d 100644 --- a/arch/powerpc/configs/maple_defconfig +++ b/arch/powerpc/configs/maple_defconfig @@ -333,7 +333,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -374,6 +374,7 @@ CONFIG_BLK_DEV_IDEDISK=y CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set CONFIG_IDE_TASK_IOCTL=y CONFIG_IDE_PROC_FS=y @@ -427,10 +428,129 @@ CONFIG_IDE_ARCH_OBSOLETE_INIT=y # SCSI device support # # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +CONFIG_SCSI_IPR=y +CONFIG_SCSI_IPR_TRACE=y +CONFIG_SCSI_IPR_DUMP=y +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +CONFIG_ATA=y +CONFIG_ATA_NONSTANDARD=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -536,6 +656,7 @@ CONFIG_USB_PEGASUS=y # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set +# CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set @@ -783,12 +904,14 @@ CONFIG_USB_UHCI_HCD=y # # may also be needed; see USB_STORAGE Help for more information # +# CONFIG_USB_STORAGE is not set # CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set CONFIG_USB_MON=y # diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig index b0266de48491..a3d52e3f2ded 100644 --- a/arch/powerpc/configs/mpc7448_hpc2_defconfig +++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:48:28 2007 +# Linux kernel version: 2.6.25-rc6 +# Mon Mar 24 08:48:11 2008 # # CONFIG_PPC64 is not set @@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -66,15 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -87,11 +92,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -99,6 +106,13 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -121,6 +135,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support @@ -131,20 +146,22 @@ CONFIG_PPC_MULTIPLATFORM=y # CONFIG_PPC_86xx is not set CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set +# CONFIG_MPC5121_ADS is not set # CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set -# CONFIG_PPC_EFIKA is not set -# CONFIG_PPC_LITE5200 is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set CONFIG_EMBEDDED6xx=y # CONFIG_LINKSTATION is not set +# CONFIG_STORCENTER is not set CONFIG_MPC7448HPC2=y # CONFIG_PPC_HOLLY is not set # CONFIG_PPC_PRPMC2800 is not set CONFIG_TSI108_BRIDGE=y +# CONFIG_IPIC is not set CONFIG_MPIC=y CONFIG_MPIC_WEIRD=y # CONFIG_PPC_I8259 is not set @@ -156,7 +173,6 @@ CONFIG_MPIC_WEIRD=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_TAU is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -172,12 +188,16 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -197,11 +217,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y # CONFIG_SECCOMP is not set -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # @@ -249,6 +265,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -304,6 +321,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -348,7 +366,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -356,6 +374,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -419,6 +439,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -472,6 +493,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set @@ -505,7 +527,6 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=y @@ -521,6 +542,7 @@ CONFIG_PHYLIB=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -552,6 +574,7 @@ CONFIG_8139TOO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -563,6 +586,9 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -589,6 +615,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -602,7 +629,6 @@ CONFIG_NETDEV_10000=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -645,6 +671,7 @@ CONFIG_INPUT=y # # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -703,6 +730,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -755,16 +783,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -790,12 +816,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -837,8 +861,10 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -883,7 +909,6 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -899,7 +924,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -913,6 +937,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set # CONFIG_BOOTX_TEXT is not set @@ -924,5 +949,49 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_SEQIV is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig index 5eae305215dc..0264c5757f78 100644 --- a/arch/powerpc/configs/mpc8272_ads_defconfig +++ b/arch/powerpc/configs/mpc8272_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc5 -# Thu Dec 13 22:40:57 2007 +# Linux kernel version: 2.6.25-rc6 +# Mon Mar 24 08:48:13 2008 # # CONFIG_PPC64 is not set @@ -28,6 +28,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -69,9 +70,14 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -83,11 +89,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -95,6 +103,13 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -116,6 +131,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support @@ -124,16 +140,18 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_PPC_82xx=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set CONFIG_MPC8272_ADS=y # CONFIG_PQ2FADS is not set +# CONFIG_EP8248E is not set CONFIG_PQ2ADS=y CONFIG_8260=y CONFIG_8272=y CONFIG_PQ2_ADS_PCI_PIC=y +# CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -162,12 +180,16 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y @@ -182,11 +204,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="mpc8272ads.dts" CONFIG_ISA_DMA_API=y # @@ -205,6 +223,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set # # Advanced setup @@ -277,12 +296,13 @@ CONFIG_IPV6_SIT=y # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set @@ -292,6 +312,13 @@ CONFIG_NETFILTER=y # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set + +# +# IPv6: Netfilter Configuration +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set @@ -305,6 +332,7 @@ CONFIG_NETFILTER=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -313,6 +341,7 @@ CONFIG_NETFILTER=y # # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set @@ -427,6 +456,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -472,6 +502,7 @@ CONFIG_DAVICOM_PHY=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set CONFIG_MDIO_BITBANG=y CONFIG_NET_ETHERNET=y @@ -497,6 +528,8 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_R8169 is not set @@ -507,6 +540,7 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_GIANFAR is not set # CONFIG_QLA3XXX is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -519,6 +553,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -642,6 +677,7 @@ CONFIG_DEVPORT=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -684,9 +720,11 @@ CONFIG_DAB=y # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -710,12 +748,10 @@ CONFIG_FS_MBCACHE=y CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -743,6 +779,7 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -751,8 +788,10 @@ CONFIG_TMPFS=y # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -833,7 +872,6 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y -# CONFIG_UCC_SLOW is not set # # Library routines @@ -851,7 +889,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -870,6 +907,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -882,8 +920,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -902,6 +940,7 @@ CONFIG_BDI_SWITCH=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_NULL is not set @@ -915,6 +954,9 @@ CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -934,6 +976,7 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index a9807f083bc4..9e0dd8201691 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc8 -# Mon Jan 28 13:14:19 2008 +# Linux kernel version: 2.6.25-rc9 +# Tue Apr 15 18:07:36 2008 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_6xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_FPU=y +# CONFIG_FSL_EMB_PERFMON is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set @@ -28,6 +29,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -65,17 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -88,17 +92,26 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -127,6 +140,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support @@ -135,8 +149,8 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_PPC_82xx is not set CONFIG_PPC_83xx=y # CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -181,13 +195,18 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MATH_EMULATION=y +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -206,11 +225,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # @@ -255,6 +270,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -310,6 +326,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -337,7 +354,90 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_OF_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +CONFIG_MTD_NAND_FSL_ELBC=y +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y @@ -346,14 +446,17 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -398,6 +501,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_MV is not set CONFIG_SATA_FSL=y # CONFIG_PATA_PLATFORM is not set # CONFIG_MD is not set @@ -424,6 +528,7 @@ CONFIG_VITESSE_PHY=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set CONFIG_ICPLUS_PHY=y +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -434,9 +539,14 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set CONFIG_GIANFAR=y # CONFIG_GFAR_NAPI is not set CONFIG_UCC_GETH=y +# CONFIG_UGETH_NAPI is not set +# CONFIG_UGETH_MAGIC_PACKET is not set +# CONFIG_UGETH_FILTERING is not set +# CONFIG_UGETH_TX_ON_DEMAND is not set CONFIG_NETDEV_10000=y # @@ -444,10 +554,18 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -539,18 +657,17 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_M41T00 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -575,6 +692,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -602,6 +720,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set @@ -609,9 +728,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -622,6 +743,11 @@ CONFIG_WATCHDOG=y CONFIG_83xx_WDT=y # +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# # Sonics Silicon Backplane # CONFIG_SSB_POSSIBLE=y @@ -638,6 +764,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -660,26 +787,99 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y +CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # -# USB Gadget Support +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_STORAGE is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + # +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -705,12 +905,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -750,10 +948,13 @@ CONFIG_TMPFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -801,6 +1002,8 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +CONFIG_UCC_FAST=y +CONFIG_UCC=y # # Library routines @@ -816,10 +1019,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_KPROBES is not set -# CONFIG_MARKERS is not set +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -845,6 +1045,7 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set @@ -862,6 +1063,9 @@ CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -876,12 +1080,14 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index 90e38ba3832b..2075722911bb 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc8 -# Mon Jan 28 13:12:07 2008 +# Linux kernel version: 2.6.25-rc7 +# Mon Mar 31 11:37:08 2008 # # CONFIG_PPC64 is not set @@ -17,6 +17,7 @@ CONFIG_PPC_85xx=y CONFIG_E500=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y +CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set @@ -29,6 +30,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -67,17 +69,21 @@ CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set CONFIG_AUDIT=y # CONFIG_AUDITSYSCALL is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -91,11 +97,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -103,6 +111,13 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -131,12 +146,13 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -184,13 +200,17 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -209,11 +229,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # @@ -264,6 +280,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -347,6 +364,7 @@ CONFIG_SCTP_HMAC_MD5=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -395,7 +413,7 @@ CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -403,6 +421,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -468,6 +488,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -522,6 +543,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set @@ -570,6 +592,7 @@ CONFIG_VITESSE_PHY=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -592,7 +615,9 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -620,6 +645,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -642,7 +668,6 @@ CONFIG_NETDEV_10000=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -693,6 +718,7 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -724,8 +750,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y -CONFIG_GEN_RTC=y -CONFIG_GEN_RTC_X=y +# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -773,14 +798,12 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_M41T00 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -796,6 +819,7 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -820,6 +844,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # Supported SAA7146 based PCI Adapters # +# CONFIG_TTPCI_EEPROM is not set +# CONFIG_DVB_BUDGET_CORE is not set # # Supported USB Adapters @@ -905,11 +931,13 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_PLL is not set # CONFIG_DVB_TDA826X is not set # CONFIG_DVB_TDA827X is not set +# CONFIG_DVB_TDA18271 is not set # CONFIG_DVB_TUNER_QT1010 is not set # CONFIG_DVB_TUNER_MT2060 is not set # CONFIG_DVB_TUNER_MT2266 is not set # CONFIG_DVB_TUNER_MT2131 is not set # CONFIG_DVB_TUNER_DIB0070 is not set +# CONFIG_DVB_TUNER_XC5000 is not set # # Miscellaneous devices @@ -987,6 +1015,7 @@ CONFIG_SND_AC97_CODEC=y # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set @@ -1012,6 +1041,7 @@ CONFIG_SND_AC97_CODEC=y # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set CONFIG_SND_INTEL8X0=y @@ -1029,6 +1059,7 @@ CONFIG_SND_INTEL8X0=y # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set # CONFIG_SND_AC97_POWER_SAVE is not set @@ -1058,6 +1089,10 @@ CONFIG_SND_INTEL8X0=y # # +# ALSA SoC audio for Freescale SOCs +# + +# # Open Sound System # # CONFIG_SOUND_PRIME is not set @@ -1080,6 +1115,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -1093,9 +1129,10 @@ CONFIG_USB_DEVICE_CLASS=y # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EHCI_FSL is not set +CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y @@ -1146,10 +1183,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1175,16 +1208,9 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set @@ -1216,6 +1242,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set # # SPI RTC drivers @@ -1225,9 +1252,10 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -1235,6 +1263,7 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -1260,12 +1289,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1317,8 +1344,10 @@ CONFIG_BFS_FS=m CONFIG_EFS_FS=m CONFIG_CRAMFS=y CONFIG_VXFS_FS=m +# CONFIG_MINIX_FS is not set CONFIG_HPFS_FS=m CONFIG_QNX4FS_FS=m +# CONFIG_ROMFS_FS is not set CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set @@ -1426,7 +1455,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -1445,6 +1473,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1458,9 +1487,9 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -1480,6 +1509,7 @@ CONFIG_FORCED_INLINING=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y @@ -1498,6 +1528,9 @@ CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -1512,12 +1545,15 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/mpc8610_hpcd_defconfig b/arch/powerpc/configs/mpc8610_hpcd_defconfig index 2500ef42959d..9270afe7594d 100644 --- a/arch/powerpc/configs/mpc8610_hpcd_defconfig +++ b/arch/powerpc/configs/mpc8610_hpcd_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:48:56 2007 +# Linux kernel version: 2.6.25-rc6 +# Mon Mar 24 08:48:33 2008 # # CONFIG_PPC64 is not set @@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -65,16 +66,20 @@ CONFIG_LOCALVERSION="" # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -88,11 +93,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -100,6 +107,13 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -122,6 +136,7 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" +CONFIG_CLASSIC_RCU=y # # Platform support @@ -130,14 +145,15 @@ CONFIG_DEFAULT_IOSCHED="deadline" # CONFIG_PPC_82xx is not set # CONFIG_PPC_83xx is not set CONFIG_PPC_86xx=y -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set # CONFIG_MPC8641_HPCN is not set CONFIG_MPC8610_HPCD=y CONFIG_MPC8610=y +# CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -148,7 +164,6 @@ CONFIG_MPIC=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -164,12 +179,16 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -188,10 +207,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y # CONFIG_SECCOMP is not set -# CONFIG_WANT_DEVICE_TREE is not set CONFIG_ISA_DMA_API=y # @@ -243,6 +259,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -311,6 +328,7 @@ CONFIG_IPV6_SIT=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -357,7 +375,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -365,6 +383,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 # CONFIG_BLK_DEV_IDE is not set @@ -432,6 +452,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -462,6 +483,7 @@ CONFIG_SATA_AHCI=y # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set +# CONFIG_SATA_FSL is not set CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -485,6 +507,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set @@ -518,7 +541,6 @@ CONFIG_DUMMY=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=y @@ -534,6 +556,7 @@ CONFIG_PHYLIB=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -574,6 +597,7 @@ CONFIG_8139TOO_PIO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -585,6 +609,9 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -610,6 +637,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -623,7 +651,6 @@ CONFIG_NETDEV_10000=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -674,6 +701,7 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -748,14 +776,12 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_M41T00 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -771,6 +797,7 @@ CONFIG_I2C_MPC=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -859,6 +886,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set @@ -884,6 +912,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set @@ -901,6 +930,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set @@ -929,6 +959,10 @@ CONFIG_SND_SOC_MPC8610_HPCD=y CONFIG_SND_SOC_CS4270=y CONFIG_SND_SOC_CS4270_VD33_ERRATA=y +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set @@ -942,16 +976,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -977,11 +1009,9 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1023,8 +1053,10 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1114,7 +1146,6 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -1130,7 +1161,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -1149,6 +1179,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1162,8 +1193,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -1179,5 +1210,49 @@ CONFIG_FORCED_INLINING=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_SEQIV is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/mpc8641_hpcn_defconfig b/arch/powerpc/configs/mpc8641_hpcn_defconfig index ff092fc4c6be..d01dcdb70bd7 100644 --- a/arch/powerpc/configs/mpc8641_hpcn_defconfig +++ b/arch/powerpc/configs/mpc8641_hpcn_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:48:58 2007 +# Linux kernel version: 2.6.25-rc7 +# Mon Mar 31 11:37:11 2008 # # CONFIG_PPC64 is not set @@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -68,17 +69,21 @@ CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set CONFIG_AUDIT=y # CONFIG_AUDITSYSCALL is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -92,11 +97,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -104,6 +111,14 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -132,6 +147,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y # # Platform support @@ -140,14 +156,15 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_PPC_82xx is not set # CONFIG_PPC_83xx is not set CONFIG_PPC_86xx=y -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set CONFIG_MPC8641_HPCN=y # CONFIG_MPC8610_HPCD is not set CONFIG_MPC8641=y +# CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set CONFIG_PPC_I8259=y @@ -158,7 +175,6 @@ CONFIG_PPC_I8259=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set CONFIG_FSL_ULI1575=y # @@ -174,13 +190,16 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_IRQ_ALL_CPUS is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -201,7 +220,6 @@ CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set CONFIG_SECCOMP=y -# CONFIG_WANT_DEVICE_TREE is not set CONFIG_ISA_DMA_API=y # @@ -252,6 +270,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -335,6 +354,7 @@ CONFIG_SCTP_HMAC_MD5=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -383,7 +403,7 @@ CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -391,6 +411,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -456,6 +478,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -486,6 +509,7 @@ CONFIG_SATA_AHCI=y # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set +# CONFIG_SATA_FSL is not set CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -509,6 +533,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set @@ -542,7 +567,6 @@ CONFIG_DUMMY=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=y @@ -558,6 +582,7 @@ CONFIG_VITESSE_PHY=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -579,6 +604,9 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -605,6 +633,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -627,7 +656,6 @@ CONFIG_NETDEV_10000=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -678,6 +706,7 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -707,8 +736,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y -CONFIG_GEN_RTC=y -CONFIG_GEN_RTC_X=y +# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -756,14 +784,12 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_M41T00 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -779,6 +805,7 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -803,6 +830,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # Supported SAA7146 based PCI Adapters # +# CONFIG_TTPCI_EEPROM is not set +# CONFIG_DVB_BUDGET_CORE is not set # # Supported USB Adapters @@ -888,11 +917,13 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_PLL is not set # CONFIG_DVB_TDA826X is not set # CONFIG_DVB_TDA827X is not set +# CONFIG_DVB_TDA18271 is not set # CONFIG_DVB_TUNER_QT1010 is not set # CONFIG_DVB_TUNER_MT2060 is not set # CONFIG_DVB_TUNER_MT2266 is not set # CONFIG_DVB_TUNER_MT2131 is not set # CONFIG_DVB_TUNER_DIB0070 is not set +# CONFIG_DVB_TUNER_XC5000 is not set # # Miscellaneous devices @@ -970,6 +1001,7 @@ CONFIG_SND_AC97_CODEC=y # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set @@ -995,6 +1027,7 @@ CONFIG_SND_AC97_CODEC=y # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set CONFIG_SND_INTEL8X0=y @@ -1012,6 +1045,7 @@ CONFIG_SND_INTEL8X0=y # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set # CONFIG_SND_AC97_POWER_SAVE is not set @@ -1041,6 +1075,10 @@ CONFIG_SND_INTEL8X0=y # # +# ALSA SoC audio for Freescale SOCs +# + +# # Open Sound System # # CONFIG_SOUND_PRIME is not set @@ -1063,6 +1101,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -1076,9 +1115,10 @@ CONFIG_USB_DEVICE_CLASS=y # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EHCI_FSL is not set +CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y @@ -1129,10 +1169,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1158,16 +1194,9 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set @@ -1199,6 +1228,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set # # SPI RTC drivers @@ -1208,9 +1238,10 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -1218,6 +1249,7 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -1243,12 +1275,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1300,8 +1330,10 @@ CONFIG_BFS_FS=m CONFIG_EFS_FS=m CONFIG_CRAMFS=y CONFIG_VXFS_FS=m +# CONFIG_MINIX_FS is not set CONFIG_HPFS_FS=m CONFIG_QNX4FS_FS=m +# CONFIG_ROMFS_FS is not set CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set @@ -1393,7 +1425,6 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -1410,7 +1441,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -1429,6 +1459,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1442,9 +1473,9 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -1463,6 +1494,7 @@ CONFIG_FORCED_INLINING=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y @@ -1481,6 +1513,9 @@ CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -1495,11 +1530,14 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig index a7ef231f2ab2..2d831db9ae5b 100644 --- a/arch/powerpc/configs/mpc866_ads_defconfig +++ b/arch/powerpc/configs/mpc866_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:48:59 2007 +# Linux kernel version: 2.6.25-rc6 +# Mon Mar 24 08:48:35 2008 # # CONFIG_PPC64 is not set @@ -26,6 +26,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -62,15 +63,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -82,11 +87,13 @@ CONFIG_KALLSYMS=y CONFIG_PRINTK=y # CONFIG_BUG is not set CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y # CONFIG_BASE_FULL is not set CONFIG_FUTEX=y CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y # CONFIG_VM_EVENT_COUNTERS is not set @@ -94,6 +101,13 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=1 @@ -116,12 +130,13 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set CONFIG_CPM1=y @@ -129,6 +144,7 @@ CONFIG_CPM1=y CONFIG_MPC86XADS=y # CONFIG_MPC885ADS is not set # CONFIG_PPC_EP88XC is not set +# CONFIG_PPC_ADDER875 is not set # # MPC8xx CPM Options @@ -145,6 +161,7 @@ CONFIG_NO_UCODE_PATCH=y # CONFIG_I2C_SPI_UCODE_PATCH is not set # CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set # CONFIG_PQ2ADS is not set +# CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -155,7 +172,7 @@ CONFIG_NO_UCODE_PATCH=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set +CONFIG_PPC_CPM_NEW_BINDING=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -172,13 +189,17 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -197,11 +218,7 @@ CONFIG_VIRT_TO_BUS=y # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y # CONFIG_SECCOMP is not set -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # @@ -246,6 +263,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -301,6 +319,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -340,6 +359,8 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -374,11 +395,8 @@ CONFIG_PHYLIB=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set CONFIG_FIXED_PHY=y -CONFIG_FIXED_MII_10_FDX=y -CONFIG_FIXED_MII_100_FDX=y -# CONFIG_FIXED_MII_1000_FDX is not set -CONFIG_FIXED_MII_AMNT=1 # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y @@ -392,6 +410,8 @@ CONFIG_FS_ENET_HAS_SCC=y CONFIG_FS_ENET_HAS_FEC=y CONFIG_FS_ENET_MDIO_FEC=y CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set +# CONFIG_GIANFAR is not set CONFIG_NETDEV_10000=y # @@ -402,7 +422,6 @@ CONFIG_NETDEV_10000=y # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -519,6 +538,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -568,15 +588,13 @@ CONFIG_USB_SUPPORT=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -604,12 +622,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -651,8 +667,10 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -699,7 +717,6 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -716,7 +733,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -730,6 +746,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_SAMPLES is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -739,6 +756,49 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_SEQIV is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig index 22f8171d6d45..82151b9bba26 100644 --- a/arch/powerpc/configs/mpc885_ads_defconfig +++ b/arch/powerpc/configs/mpc885_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:49:01 2007 +# Linux kernel version: 2.6.25-rc6 +# Mon Mar 24 08:48:35 2008 # # CONFIG_PPC64 is not set @@ -26,6 +26,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -63,15 +64,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -84,11 +89,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set +CONFIG_COMPAT_BRK=y # CONFIG_BASE_FULL is not set # CONFIG_FUTEX is not set CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y # CONFIG_VM_EVENT_COUNTERS is not set @@ -96,6 +103,13 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set @@ -117,12 +131,13 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" +CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set CONFIG_CPM1=y @@ -130,6 +145,7 @@ CONFIG_CPM1=y # CONFIG_MPC86XADS is not set CONFIG_MPC885ADS=y # CONFIG_PPC_EP88XC is not set +# CONFIG_PPC_ADDER875 is not set # # Freescale Ethernet driver platform-specific options @@ -153,6 +169,7 @@ CONFIG_NO_UCODE_PATCH=y # CONFIG_I2C_SPI_UCODE_PATCH is not set # CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set # CONFIG_PQ2ADS is not set +# CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -163,7 +180,6 @@ CONFIG_NO_UCODE_PATCH=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set CONFIG_PPC_CPM_NEW_BINDING=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -181,6 +197,7 @@ CONFIG_HZ_100=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=100 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -188,7 +205,10 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set CONFIG_8XX_MINIMAL_FPEMU=y +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -207,11 +227,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y # CONFIG_SECCOMP is not set -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="mpc885ads.dts" CONFIG_ISA_DMA_API=y # @@ -308,6 +324,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -418,6 +435,7 @@ CONFIG_OF_DEVICE=y # CONFIG_PARPORT is not set # CONFIG_BLK_DEV is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -452,6 +470,7 @@ CONFIG_DAVICOM_PHY=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -476,7 +495,6 @@ CONFIG_FS_ENET_MDIO_FEC=y # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -539,6 +557,7 @@ CONFIG_GEN_RTC=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -578,9 +597,11 @@ CONFIG_DAB=y # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -599,11 +620,9 @@ CONFIG_DAB=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -646,8 +665,10 @@ CONFIG_TMPFS=y # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -694,7 +715,6 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -709,7 +729,6 @@ CONFIG_ZLIB_INFLATE=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -728,6 +747,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set @@ -738,8 +758,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig index 797f0dfebde2..09f306248f2e 100644 --- a/arch/powerpc/configs/pasemi_defconfig +++ b/arch/powerpc/configs/pasemi_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc6 -# Tue Jan 15 10:26:10 2008 +# Linux kernel version: 2.6.25-rc6 +# Tue Mar 25 10:25:48 2008 # CONFIG_PPC64=y @@ -27,6 +27,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -67,17 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -91,11 +94,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -103,6 +108,15 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -130,6 +144,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support @@ -140,8 +155,8 @@ CONFIG_PPC_MULTIPLATFORM=y # CONFIG_PPC_86xx is not set # CONFIG_PPC_PSERIES is not set # CONFIG_PPC_ISERIES is not set -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set CONFIG_PPC_PASEMI=y @@ -159,6 +174,7 @@ CONFIG_PPC_PASEMI_MDIO=y # CONFIG_PPC_IBM_CELL_BLADE is not set # CONFIG_PQ2ADS is not set CONFIG_PPC_NATIVE=y +# CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -189,7 +205,6 @@ CONFIG_CPU_FREQ_GOV_ONDEMAND=y # CPU Frequency drivers # CONFIG_PPC_PASEMI_CPUFREQ=y -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -204,16 +219,20 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set CONFIG_BINFMT_ELF=y +CONFIG_COMPAT_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_FORCE_MAX_ZONEORDER=9 CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y CONFIG_IOMMU_VMERGE=y +CONFIG_IOMMU_HELPER=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set # CONFIG_IRQ_ALL_CPUS is not set @@ -236,12 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_PPC_HAS_HASH_64K=y CONFIG_PPC_64K_PAGES=y +# CONFIG_PPC_SUBPAGE_PROT is not set # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set # CONFIG_SECCOMP is not set -# CONFIG_WANT_DEVICE_TREE is not set CONFIG_ISA_DMA_API=y # @@ -290,6 +309,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -346,6 +366,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -441,8 +462,10 @@ CONFIG_MTD_NAND=y CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_CAFE is not set +CONFIG_MTD_NAND_PASEMI=y # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_NAND_FSL_ELBC is not set # CONFIG_MTD_ONENAND is not set # @@ -465,7 +488,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -473,11 +496,13 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y @@ -485,6 +510,7 @@ CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_BLK_DEV_IDECS is not set # CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set CONFIG_BLK_DEV_IDESCSI=y @@ -500,7 +526,6 @@ CONFIG_IDE_PROC_FS=y # # PCI IDE chipsets support # -# CONFIG_IDEPCI_PCIBUS_ORDER is not set # CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_AEC62XX is not set @@ -528,7 +553,6 @@ CONFIG_IDE_PROC_FS=y # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set CONFIG_IDE_ARCH_OBSOLETE_INIT=y # CONFIG_BLK_DEV_HD is not set @@ -593,6 +617,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -646,6 +671,7 @@ CONFIG_ATA_GENERIC=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set @@ -699,7 +725,6 @@ CONFIG_DUMMY=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=y @@ -715,6 +740,7 @@ CONFIG_MARVELL_PHY=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -742,6 +768,7 @@ CONFIG_NET_PCI=y # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -754,6 +781,9 @@ CONFIG_E1000=y CONFIG_E1000_NAPI=y # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -779,6 +809,7 @@ CONFIG_NETDEV_10000=y CONFIG_PASEMI_MAC=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -802,7 +833,6 @@ CONFIG_PASEMI_MAC=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -861,6 +891,7 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -886,8 +917,7 @@ CONFIG_LEGACY_PTY_COUNT=4 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_PASEMI=y -CONFIG_GEN_RTC=y -CONFIG_GEN_RTC_X=y +# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -897,6 +927,7 @@ CONFIG_GEN_RTC_X=y # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 # CONFIG_HANGCHECK_TIMER is not set @@ -944,13 +975,12 @@ CONFIG_I2C_PASEMI=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -975,6 +1005,7 @@ CONFIG_HWMON_VID=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -1004,6 +1035,7 @@ CONFIG_SENSORS_LM90=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set @@ -1013,9 +1045,11 @@ CONFIG_SENSORS_LM90=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -1183,6 +1217,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set @@ -1208,6 +1243,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set @@ -1225,6 +1261,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set @@ -1259,6 +1296,10 @@ CONFIG_SND_USB_USX2Y=y # # +# ALSA SoC audio for Freescale SOCs +# + +# # Open Sound System # # CONFIG_SOUND_PRIME is not set @@ -1280,6 +1321,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -1293,17 +1335,14 @@ CONFIG_USB_DEVICEFS=y # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y -CONFIG_USB_OHCI_HCD_PPC_OF_BE=y -# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set -CONFIG_USB_OHCI_HCD_PCI=y -CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y -CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y +# CONFIG_USB_OHCI_HCD_PPC_OF is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y CONFIG_USB_SL811_HCD=y @@ -1348,10 +1387,6 @@ CONFIG_USB_LIBUSUAL=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1377,16 +1412,9 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set CONFIG_EDAC=y @@ -1425,6 +1453,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set # # SPI RTC drivers @@ -1434,9 +1463,10 @@ CONFIG_RTC_DRV_DS1307=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -1444,6 +1474,7 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -1471,12 +1502,10 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -1536,8 +1565,10 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1629,7 +1660,6 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -1647,11 +1677,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -CONFIG_INSTRUMENTATION=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=y -# CONFIG_KPROBES is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -1670,6 +1695,7 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1682,9 +1708,9 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -# CONFIG_FORCED_INLINING is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -1710,7 +1736,9 @@ CONFIG_ASYNC_MEMCPY=y CONFIG_ASYNC_XOR=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y @@ -1729,6 +1757,9 @@ CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_PCBC is not set # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -1743,11 +1774,14 @@ CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig index 5416be4419bb..fca114252ac7 100644 --- a/arch/powerpc/configs/pmac32_defconfig +++ b/arch/powerpc/configs/pmac32_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:49:05 2007 +# Linux kernel version: 2.6.25-rc6 +# Thu Mar 27 13:56:21 2008 # # CONFIG_PPC64 is not set @@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -49,6 +50,9 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_HIBERNATE_32=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -67,18 +71,20 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -92,11 +98,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -104,6 +112,15 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -131,6 +148,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support @@ -141,16 +159,17 @@ CONFIG_PPC_MULTIPLATFORM=y # CONFIG_PPC_86xx is not set CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set +# CONFIG_MPC5121_ADS is not set # CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set -# CONFIG_PPC_EFIKA is not set -# CONFIG_PPC_LITE5200 is not set CONFIG_PPC_PMAC=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set # CONFIG_EMBEDDED6xx is not set CONFIG_PPC_NATIVE=y +# CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -181,7 +200,6 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_PMAC=y CONFIG_PPC601_SYNC_FIX=y # CONFIG_TAU is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -197,12 +215,16 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -221,19 +243,19 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_ARCH_WANTS_FREEZER_CONTROL=y CONFIG_PM=y # CONFIG_PM_LEGACY is not set CONFIG_PM_DEBUG=y # CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y CONFIG_PM_SLEEP=y -CONFIG_SUSPEND_UP_POSSIBLE=y CONFIG_SUSPEND=y -CONFIG_HIBERNATION_UP_POSSIBLE=y +CONFIG_SUSPEND_FREEZER=y CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="" CONFIG_APM_EMULATION=y CONFIG_SECCOMP=y -# CONFIG_WANT_DEVICE_TREE is not set CONFIG_ISA_DMA_API=y # @@ -248,7 +270,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set CONFIG_PCCARD=m # CONFIG_PCMCIA_DEBUG is not set @@ -300,6 +322,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -334,12 +357,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # -# CONFIG_NETFILTER_NETLINK is not set -CONFIG_NF_CONNTRACK_ENABLED=m +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m CONFIG_NF_CONNTRACK=m # CONFIG_NF_CT_ACCT is not set # CONFIG_NF_CONNTRACK_MARK is not set @@ -355,6 +380,7 @@ CONFIG_NF_CONNTRACK_IRC=m # CONFIG_NF_CONNTRACK_SANE is not set # CONFIG_NF_CONNTRACK_SIP is not set CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set @@ -363,8 +389,10 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m # CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -374,14 +402,17 @@ CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m # CONFIG_NETFILTER_XT_MATCH_STATE is not set @@ -399,13 +430,10 @@ CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m @@ -416,7 +444,6 @@ CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m # CONFIG_NF_NAT_SNMP_BASIC is not set CONFIG_NF_NAT_FTP=m CONFIG_NF_NAT_IRC=m @@ -426,7 +453,6 @@ CONFIG_NF_NAT_TFTP=m # CONFIG_NF_NAT_H323 is not set # CONFIG_NF_NAT_SIP is not set CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m # CONFIG_IP_NF_TARGET_CLUSTERIP is not set @@ -444,9 +470,9 @@ CONFIG_IP_DCCP_ACKVEC=y CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set CONFIG_IP_DCCP_CCID3=m -CONFIG_IP_DCCP_TFRC_LIB=m # CONFIG_IP_DCCP_CCID3_DEBUG is not set CONFIG_IP_DCCP_CCID3_RTO=100 +CONFIG_IP_DCCP_TFRC_LIB=m # # DCCP Kernel Hacking @@ -474,6 +500,7 @@ CONFIG_NET_SCH_FIFO=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set CONFIG_IRDA=m # @@ -509,15 +536,6 @@ CONFIG_IRTTY_SIR=m # CONFIG_KS959_DONGLE is not set # -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# - -# # FIR device drivers # # CONFIG_USB_IRDA is not set @@ -563,8 +581,26 @@ CONFIG_CFG80211=m CONFIG_NL80211=y CONFIG_WIRELESS_EXT=y CONFIG_MAC80211=m -CONFIG_MAC80211_RCSIMPLE=y + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_SIMPLE is not set +# CONFIG_MAC80211_RC_DEFAULT_NONE is not set + +# +# Selecting 'y' for an algorithm will +# + +# +# build the algorithm into mac80211. +# +CONFIG_MAC80211_RC_DEFAULT="pid" +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_RC_SIMPLE is not set CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set # CONFIG_MAC80211_DEBUG is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set @@ -610,7 +646,7 @@ CONFIG_BLK_DEV_UB=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -618,11 +654,13 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y @@ -630,6 +668,7 @@ CONFIG_BLK_DEV_IDEDISK=y CONFIG_BLK_DEV_IDECS=m # CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set CONFIG_BLK_DEV_IDEFLOPPY=y CONFIG_BLK_DEV_IDESCSI=y @@ -641,12 +680,12 @@ CONFIG_IDE_PROC_FS=y # # CONFIG_IDE_GENERIC is not set # CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y # # PCI IDE chipsets support # CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y @@ -680,7 +719,6 @@ CONFIG_BLK_DEV_SL82C105=y CONFIG_BLK_DEV_IDE_PMAC=y CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y CONFIG_BLK_DEV_IDEDMA_PMAC=y -# CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y CONFIG_IDE_ARCH_OBSOLETE_INIT=y # CONFIG_BLK_DEV_HD is not set @@ -754,6 +792,7 @@ CONFIG_SCSI_AIC7XXX_OLD=m # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 @@ -848,7 +887,6 @@ CONFIG_DUMMY=m # CONFIG_EQUALIZER is not set CONFIG_TUN=m # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -880,6 +918,7 @@ CONFIG_PCNET32=y # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -891,6 +930,9 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -916,6 +958,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -941,12 +984,16 @@ CONFIG_PCMCIA_HERMES=m # CONFIG_PCMCIA_WL3501 is not set CONFIG_PRISM54=m # CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8180 is not set # CONFIG_RTL8187 is not set # CONFIG_ADM8211 is not set CONFIG_P54_COMMON=m # CONFIG_P54_USB is not set # CONFIG_P54_PCI is not set -# CONFIG_IWLWIFI is not set +# CONFIG_ATH5K is not set +# CONFIG_IWL4965 is not set +# CONFIG_IWL3945 is not set # CONFIG_HOSTAP is not set CONFIG_B43=m CONFIG_B43_PCI_AUTOSELECT=y @@ -954,20 +1001,17 @@ CONFIG_B43_PCICORE_AUTOSELECT=y # CONFIG_B43_PCMCIA is not set CONFIG_B43_LEDS=y # CONFIG_B43_DEBUG is not set -CONFIG_B43_DMA=y -CONFIG_B43_PIO=y -CONFIG_B43_DMA_AND_PIO_MODE=y -# CONFIG_B43_DMA_MODE is not set -# CONFIG_B43_PIO_MODE is not set CONFIG_B43LEGACY=m CONFIG_B43LEGACY_PCI_AUTOSELECT=y CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y +CONFIG_B43LEGACY_LEDS=y CONFIG_B43LEGACY_DEBUG=y CONFIG_B43LEGACY_DMA=y CONFIG_B43LEGACY_PIO=y CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y # CONFIG_B43LEGACY_DMA_MODE is not set # CONFIG_B43LEGACY_PIO_MODE is not set +# CONFIG_ZD1211RW is not set # CONFIG_RT2X00 is not set # @@ -1005,7 +1049,6 @@ CONFIG_PPP_BSDCOMP=m # CONFIG_SLIP is not set CONFIG_SLHC=y # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -1068,6 +1111,7 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -1105,6 +1149,7 @@ CONFIG_GEN_RTC=y # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y @@ -1151,14 +1196,12 @@ CONFIG_I2C_POWERMAC=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_M41T00 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1179,6 +1222,7 @@ CONFIG_APM_POWER=y # CONFIG_BATTERY_DS2760 is not set CONFIG_BATTERY_PMU=y # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -1188,6 +1232,7 @@ CONFIG_SSB_POSSIBLE=y CONFIG_SSB=m CONFIG_SSB_PCIHOST_POSSIBLE=y CONFIG_SSB_PCIHOST=y +CONFIG_SSB_B43_PCI_BRIDGE=y CONFIG_SSB_PCMCIAHOST_POSSIBLE=y # CONFIG_SSB_PCMCIAHOST is not set # CONFIG_SSB_DEBUG is not set @@ -1372,6 +1417,7 @@ CONFIG_SND_DUMMY=m # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set @@ -1397,6 +1443,7 @@ CONFIG_SND_DUMMY=m # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set @@ -1414,6 +1461,7 @@ CONFIG_SND_DUMMY=m # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set @@ -1461,6 +1509,10 @@ CONFIG_SND_USB_AUDIO=m # # +# ALSA SoC audio for Freescale SOCs +# + +# # Open Sound System # # CONFIG_SOUND_PRIME is not set @@ -1482,6 +1534,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -1497,9 +1550,9 @@ CONFIG_USB_DYNAMIC_MINORS=y # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=m -CONFIG_USB_EHCI_SPLIT_ISO=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EHCI_HCD_PPC_OF is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_PPC_OF is not set @@ -1547,11 +1600,8 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# CONFIG_USB_SERIAL=m +CONFIG_USB_EZUSB=y # CONFIG_USB_SERIAL_GENERIC is not set # CONFIG_USB_SERIAL_AIRCABLE is not set # CONFIG_USB_SERIAL_AIRPRIME is not set @@ -1572,6 +1622,7 @@ CONFIG_USB_SERIAL_IPAQ=m # CONFIG_USB_SERIAL_EDGEPORT_TI is not set # CONFIG_USB_SERIAL_GARMIN is not set # CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set CONFIG_USB_SERIAL_KEYSPAN_PDA=m CONFIG_USB_SERIAL_KEYSPAN=m CONFIG_USB_SERIAL_KEYSPAN_MPR=y @@ -1603,7 +1654,6 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y # CONFIG_USB_SERIAL_OPTION is not set # CONFIG_USB_SERIAL_OMNINET is not set # CONFIG_USB_SERIAL_DEBUG is not set -CONFIG_USB_EZUSB=y # # USB Miscellaneous drivers @@ -1628,16 +1678,9 @@ CONFIG_USB_APPLEDISPLAY=m # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -1655,6 +1698,7 @@ CONFIG_LEDS_TRIGGER_IDE_DISK=y # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -1680,12 +1724,10 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m @@ -1733,8 +1775,10 @@ CONFIG_HFSPLUS_FS=m # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1828,7 +1872,6 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -1850,11 +1893,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -CONFIG_INSTRUMENTATION=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=y -# CONFIG_KPROBES is not set -# CONFIG_MARKERS is not set +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1873,6 +1912,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1885,9 +1925,9 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -# CONFIG_FORCED_INLINING is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -1908,7 +1948,9 @@ CONFIG_BOOTX_TEXT=y # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y @@ -1927,6 +1969,9 @@ CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -1942,11 +1987,14 @@ CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig new file mode 100644 index 000000000000..9d0140e3838e --- /dev/null +++ b/arch/powerpc/configs/ppc40x_defconfig @@ -0,0 +1,896 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.25-rc9 +# Tue Apr 15 08:46:44 2008 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_6xx is not set +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +CONFIG_40x=y +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_4xx=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_PPC_DCR_NATIVE=y +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_DCR=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +CONFIG_PPC4xx_PCI_EXPRESS=y + +# +# Platform support +# +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +CONFIG_EP405=y +CONFIG_KILAUEA=y +CONFIG_MAKALU=y +CONFIG_WALNUT=y +CONFIG_XILINX_VIRTEX_GENERIC_BOARD=y +CONFIG_405GP=y +CONFIG_405EX=y +CONFIG_XILINX_VIRTEX=y +CONFIG_XILINX_VIRTEX_II_PRO=y +CONFIG_XILINX_VIRTEX_4_FX=y +CONFIG_IBM405_ERR77=y +CONFIG_IBM405_ERR51=y +# CONFIG_IPIC is not set +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_FSL_ULI1575 is not set +CONFIG_OF_RTC=y + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_MATH_EMULATION is not set +# CONFIG_IOMMU_HELPER is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +# CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x00400000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=35000 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_XILINX_SYSACE is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_IBM_NEW_EMAC=y +CONFIG_IBM_NEW_EMAC_RXB=128 +CONFIG_IBM_NEW_EMAC_TXB=64 +CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32 +CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256 +CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0 +# CONFIG_IBM_NEW_EMAC_DEBUG is not set +CONFIG_IBM_NEW_EMAC_ZMII=y +CONFIG_IBM_NEW_EMAC_RGMII=y +# CONFIG_IBM_NEW_EMAC_TAH is not set +CONFIG_IBM_NEW_EMAC_EMAC4=y +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +CONFIG_XILINX_HWICAP=m +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +CONFIG_THERMAL=y +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUGGER is not set +# CONFIG_VIRQ_DEBUG is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig index 57bd775ef777..12f9b5a80220 100644 --- a/arch/powerpc/configs/ppc44x_defconfig +++ b/arch/powerpc/configs/ppc44x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Fri Feb 15 21:57:35 2008 +# Linux kernel version: 2.6.25-rc6 +# Sat Apr 5 09:35:48 2008 # # CONFIG_PPC64 is not set @@ -79,6 +79,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -113,6 +114,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -143,7 +145,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set CONFIG_PPC4xx_PCI_EXPRESS=y # @@ -161,12 +162,15 @@ CONFIG_TAISHAN=y CONFIG_KATMAI=y CONFIG_RAINIER=y CONFIG_WARP=y +CONFIG_CANYONLANDS=y +CONFIG_YOSEMITE=y CONFIG_440EP=y CONFIG_440EPX=y CONFIG_440GRX=y CONFIG_440GP=y CONFIG_440GX=y CONFIG_440SPe=y +CONFIG_460EX=y CONFIG_IBM440EP_ERR42=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -199,7 +203,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -# CONFIG_RCU_TRACE is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y @@ -232,6 +235,7 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -678,6 +682,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -805,6 +810,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 7695a4c66e80..970282b1a004 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Fri Dec 21 14:47:29 2007 +# Linux kernel version: 2.6.25-rc6 +# Thu Mar 27 13:56:24 2008 # CONFIG_PPC64=y @@ -28,6 +28,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -49,7 +50,9 @@ CONFIG_GENERIC_TBSYNC=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set -CONFIG_PPC64_SWSUSP=y +CONFIG_HIBERNATE_64=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set CONFIG_PPC_DCR_MMIO=y CONFIG_PPC_DCR=y @@ -72,8 +75,6 @@ CONFIG_POSIX_MQUEUE=y CONFIG_TASKSTATS=y CONFIG_TASK_DELAY_ACCT=y # CONFIG_TASK_XACCT is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y @@ -82,13 +83,18 @@ CONFIG_CGROUPS=y # CONFIG_CGROUP_DEBUG is not set # CONFIG_CGROUP_NS is not set CONFIG_CPUSETS=y -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUP_CPUACCT is not set +# CONFIG_RESOURCE_COUNTERS is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_PROC_PID_CPUSET=y CONFIG_RELAY=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -102,11 +108,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -114,6 +122,15 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -141,6 +158,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support @@ -163,8 +181,8 @@ CONFIG_VIODASD=y CONFIG_VIOCD=m CONFIG_VIOTAPE=m CONFIG_VIOPATH=y -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set CONFIG_PPC_PMAC=y CONFIG_PPC_PMAC64=y CONFIG_PPC_MAPLE=y @@ -176,7 +194,6 @@ CONFIG_PPC_PASEMI=y CONFIG_PPC_PASEMI_IOMMU=y # CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set CONFIG_PPC_PASEMI_MDIO=y -CONFIG_ELECTRA_IDE=y CONFIG_PPC_CELLEB=y # CONFIG_PPC_PS3 is not set CONFIG_PPC_CELL=y @@ -193,11 +210,13 @@ CONFIG_CBE_RAS=y CONFIG_CBE_THERM=m CONFIG_CBE_CPUFREQ=m CONFIG_CBE_CPUFREQ_PMI=m +CONFIG_OPROFILE_CELL=y # CONFIG_PQ2ADS is not set CONFIG_PPC_NATIVE=y CONFIG_UDBG_RTAS_CONSOLE=y CONFIG_PPC_UDBG_BEAT=y CONFIG_XICS=y +# CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set CONFIG_PPC_I8259=y @@ -236,7 +255,6 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=y # CONFIG_CPU_FREQ_PMAC64=y CONFIG_PPC_PASEMI_CPUFREQ=y -# CONFIG_CPM2 is not set CONFIG_AXON_RAM=m # CONFIG_FSL_ULI1575 is not set @@ -252,19 +270,24 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set CONFIG_BINFMT_ELF=y +CONFIG_COMPAT_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y CONFIG_IOMMU_VMERGE=y +CONFIG_IOMMU_HELPER=y CONFIG_HOTPLUG_CPU=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set +# CONFIG_PHYP_DUMP is not set CONFIG_IRQ_ALL_CPUS=y # CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y @@ -294,11 +317,9 @@ CONFIG_PPC_HAS_HASH_64K=y # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_ARCH_WANTS_FREEZER_CONTROL=y # CONFIG_PM is not set -CONFIG_SUSPEND_SMP_POSSIBLE=y -CONFIG_HIBERNATION_SMP_POSSIBLE=y CONFIG_SECCOMP=y -# CONFIG_WANT_DEVICE_TREE is not set CONFIG_ISA_DMA_API=y # @@ -313,7 +334,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set @@ -352,6 +373,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -375,7 +397,7 @@ CONFIG_INET_TUNNEL=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y -CONFIG_INET_LRO=m +CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -389,14 +411,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # -CONFIG_NETFILTER_NETLINK=y +CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m -CONFIG_NF_CONNTRACK_ENABLED=m CONFIG_NF_CONNTRACK=m CONFIG_NF_CT_ACCT=y CONFIG_NF_CONNTRACK_MARK=y @@ -422,8 +444,10 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -433,14 +457,17 @@ CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATE=m @@ -458,13 +485,10 @@ CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m @@ -475,7 +499,6 @@ CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_FTP=m @@ -486,7 +509,6 @@ CONFIG_NF_NAT_PPTP=m CONFIG_NF_NAT_H323=m CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_TARGET_CLUSTERIP=m @@ -517,6 +539,7 @@ CONFIG_NET_CLS_ROUTE=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -563,7 +586,7 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -571,11 +594,13 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y @@ -583,6 +608,7 @@ CONFIG_BLK_DEV_IDEDISK=y # CONFIG_BLK_DEV_IDECS is not set # CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set @@ -594,12 +620,12 @@ CONFIG_IDE_PROC_FS=y # CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y # # PCI IDE chipsets support # CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y @@ -634,7 +660,6 @@ CONFIG_BLK_DEV_CELLEB=y CONFIG_BLK_DEV_IDE_PMAC=y CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y CONFIG_BLK_DEV_IDEDMA_PMAC=y -# CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y CONFIG_IDE_ARCH_OBSOLETE_INIT=y # CONFIG_BLK_DEV_HD is not set @@ -701,6 +726,7 @@ CONFIG_SCSI_LOWLEVEL=y CONFIG_SCSI_IBMVSCSI=y # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 @@ -760,6 +786,7 @@ CONFIG_SATA_SIL24=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set @@ -776,6 +803,7 @@ CONFIG_PATA_PCMCIA=y # CONFIG_PATA_VIA is not set CONFIG_PATA_WINBOND=y CONFIG_PATA_PLATFORM=y +# CONFIG_PATA_OF_PLATFORM is not set CONFIG_PATA_SCC=y CONFIG_MD=y CONFIG_BLK_DEV_MD=y @@ -847,7 +875,6 @@ CONFIG_BONDING=m # CONFIG_EQUALIZER is not set CONFIG_TUN=m # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=y @@ -863,11 +890,8 @@ CONFIG_MARVELL_PHY=y # CONFIG_SMSC_PHY is not set CONFIG_BROADCOM_PHY=m # CONFIG_ICPLUS_PHY is not set -CONFIG_FIXED_PHY=m -CONFIG_FIXED_MII_10_FDX=y -CONFIG_FIXED_MII_100_FDX=y -# CONFIG_FIXED_MII_1000_FDX is not set -CONFIG_FIXED_MII_AMNT=1 +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y @@ -899,6 +923,7 @@ CONFIG_E100=y # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -912,6 +937,9 @@ CONFIG_E1000=y # CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -940,6 +968,7 @@ CONFIG_IXGB=m CONFIG_PASEMI_MAC=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set CONFIG_TR=y CONFIG_IBMOL=y # CONFIG_3C359 is not set @@ -977,7 +1006,6 @@ CONFIG_PPPOE=m # CONFIG_SLIP is not set CONFIG_SLHC=m # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y # CONFIG_NETCONSOLE_DYNAMIC is not set CONFIG_NETPOLL=y @@ -1056,6 +1084,7 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -1103,6 +1132,7 @@ CONFIG_GEN_RTC=y # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 # CONFIG_HANGCHECK_TIMER is not set @@ -1151,13 +1181,12 @@ CONFIG_I2C_PASEMI=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1173,6 +1202,7 @@ CONFIG_I2C_PASEMI=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -1337,6 +1367,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set @@ -1362,6 +1393,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set @@ -1379,6 +1411,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set @@ -1426,6 +1459,10 @@ CONFIG_SND_AOA_SOUNDBUS_I2S=m # # +# ALSA SoC audio for Freescale SOCs +# + +# # Open Sound System # # CONFIG_SOUND_PRIME is not set @@ -1447,6 +1484,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -1460,10 +1498,10 @@ CONFIG_USB_DEVICE_CLASS=y # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y +# CONFIG_USB_EHCI_HCD_PPC_OF is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_PPC_OF is not set @@ -1512,10 +1550,6 @@ CONFIG_USB_STORAGE=m # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1541,16 +1575,9 @@ CONFIG_USB_APPLEDISPLAY=m # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set CONFIG_INFINIBAND=m # CONFIG_INFINIBAND_USER_MAD is not set @@ -1562,6 +1589,7 @@ CONFIG_INFINIBAND_MTHCA_DEBUG=y CONFIG_INFINIBAND_EHCA=m # CONFIG_INFINIBAND_AMSO1100 is not set # CONFIG_MLX4_INFINIBAND is not set +# CONFIG_INFINIBAND_NES is not set CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_IPOIB_CM is not set CONFIG_INFINIBAND_IPOIB_DEBUG=y @@ -1576,8 +1604,13 @@ CONFIG_EDAC=y # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_PASEMI=y +# CONFIG_EDAC_CELL is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y + +# +# Conflicting RTC option has been selected, check GEN_RTC and RTC +# CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set @@ -1604,6 +1637,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set # # SPI RTC drivers @@ -1613,9 +1647,10 @@ CONFIG_RTC_DRV_DS1307=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -1623,6 +1658,7 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -1665,12 +1701,10 @@ CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=m # CONFIG_FUSE_FS is not set @@ -1719,8 +1753,10 @@ CONFIG_HFSPLUS_FS=m # CONFIG_EFS_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1821,7 +1857,6 @@ CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -1835,6 +1870,8 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m @@ -1843,11 +1880,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -CONFIG_INSTRUMENTATION=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=y -# CONFIG_KPROBES is not set -# CONFIG_MARKERS is not set +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1866,6 +1899,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1878,9 +1912,9 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set CONFIG_DEBUG_STACKOVERFLOW=y @@ -1908,7 +1942,9 @@ CONFIG_ASYNC_MEMCPY=y CONFIG_ASYNC_XOR=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_SEQIV=m CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y @@ -1921,12 +1957,15 @@ CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m -# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_CCM=m # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -1942,11 +1981,13 @@ CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m # CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_TEST=m -# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig index a3bfbb65a933..1383eb696a20 100644 --- a/arch/powerpc/configs/pq2fads_defconfig +++ b/arch/powerpc/configs/pq2fads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc5 -# Thu Dec 13 22:39:18 2007 +# Linux kernel version: 2.6.25-rc6 +# Mon Mar 24 08:48:36 2008 # # CONFIG_PPC64 is not set @@ -28,6 +28,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -69,9 +70,14 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_SYSFS_DEPRECATED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y @@ -84,11 +90,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -96,6 +104,13 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -117,6 +132,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support @@ -125,15 +141,17 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_PPC_82xx=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_MPC8272_ADS is not set CONFIG_PQ2FADS=y +# CONFIG_EP8248E is not set CONFIG_PQ2ADS=y CONFIG_8260=y CONFIG_PQ2_ADS_PCI_PIC=y +# CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -162,12 +180,16 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y @@ -182,11 +204,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="pq2fads.dts" CONFIG_ISA_DMA_API=y # @@ -206,6 +224,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set # # Advanced setup @@ -278,12 +297,13 @@ CONFIG_IPV6_SIT=y # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set @@ -293,6 +313,13 @@ CONFIG_NETFILTER=y # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set + +# +# IPv6: Netfilter Configuration +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set @@ -306,6 +333,7 @@ CONFIG_NETFILTER=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -314,6 +342,7 @@ CONFIG_NETFILTER=y # # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set @@ -431,17 +460,20 @@ CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set # CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -455,7 +487,6 @@ CONFIG_IDE_PROC_FS=y # # PCI IDE chipsets support # -# CONFIG_IDEPCI_PCIBUS_ORDER is not set # CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set @@ -481,7 +512,6 @@ CONFIG_IDE_PROC_FS=y # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set CONFIG_IDE_ARCH_OBSOLETE_INIT=y # CONFIG_BLK_DEV_HD is not set @@ -529,6 +559,7 @@ CONFIG_DAVICOM_PHY=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set CONFIG_MDIO_BITBANG=y CONFIG_NET_ETHERNET=y @@ -554,6 +585,8 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_R8169 is not set @@ -564,6 +597,7 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_GIANFAR is not set # CONFIG_QLA3XXX is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -576,6 +610,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -700,6 +735,7 @@ CONFIG_DEVPORT=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -749,10 +785,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG_FILES is not set CONFIG_USB_GADGET_SELECTED=y @@ -776,10 +808,13 @@ CONFIG_USB_ETH=y # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set # CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -803,12 +838,10 @@ CONFIG_FS_MBCACHE=y CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -836,6 +869,7 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -844,8 +878,10 @@ CONFIG_TMPFS=y # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -926,7 +962,6 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y -# CONFIG_UCC_SLOW is not set # # Library routines @@ -944,7 +979,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -963,6 +997,7 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -975,8 +1010,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -995,6 +1030,7 @@ CONFIG_BDI_SWITCH=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_NULL is not set @@ -1008,6 +1044,9 @@ CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -1027,6 +1066,8 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig index 46b2579d38b1..f9121685f11a 100644 --- a/arch/powerpc/configs/prpmc2800_defconfig +++ b/arch/powerpc/configs/prpmc2800_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:49:11 2007 +# Linux kernel version: 2.6.25-rc7 +# Mon Mar 31 11:37:15 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -68,15 +69,23 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -89,11 +98,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -101,6 +112,13 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -123,6 +141,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support @@ -133,20 +152,22 @@ CONFIG_PPC_MULTIPLATFORM=y # CONFIG_PPC_86xx is not set CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set +# CONFIG_MPC5121_ADS is not set # CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set -# CONFIG_PPC_EFIKA is not set -# CONFIG_PPC_LITE5200 is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set CONFIG_EMBEDDED6xx=y # CONFIG_LINKSTATION is not set +# CONFIG_STORCENTER is not set # CONFIG_MPC7448HPC2 is not set # CONFIG_PPC_HOLLY is not set CONFIG_PPC_PRPMC2800=y CONFIG_MV64X60=y +# CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -158,7 +179,6 @@ CONFIG_MV64X60=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_TAU is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -174,12 +194,16 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -199,11 +223,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y # CONFIG_SECCOMP is not set -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="prpmc2800.dts" CONFIG_ISA_DMA_API=y # @@ -253,6 +273,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -308,6 +329,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -341,6 +363,7 @@ CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_OF_PARTS is not set # # User Modules And Translation Layers @@ -428,7 +451,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -436,11 +459,13 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y @@ -457,12 +482,12 @@ CONFIG_IDE_PROC_FS=y # CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y # # PCI IDE chipsets support # CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y @@ -493,7 +518,6 @@ CONFIG_BLK_DEV_PDC202XX_NEW=y # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y CONFIG_IDE_ARCH_OBSOLETE_INIT=y # CONFIG_BLK_DEV_HD is not set @@ -559,6 +583,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -612,6 +637,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set @@ -626,6 +652,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -646,7 +673,6 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=y @@ -662,6 +688,7 @@ CONFIG_PHYLIB=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -693,6 +720,7 @@ CONFIG_8139TOO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -706,6 +734,9 @@ CONFIG_E1000=y # CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -731,6 +762,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -753,7 +785,6 @@ CONFIG_NETDEV_10000=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -802,6 +833,7 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -823,8 +855,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set +# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -872,14 +903,12 @@ CONFIG_I2C_MV64XXX=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_M41T00 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -904,6 +933,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -933,6 +963,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set @@ -942,9 +973,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -1009,6 +1042,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -1022,9 +1056,9 @@ CONFIG_USB_DEVICEFS=y # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_PPC_OF is not set @@ -1061,10 +1095,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1090,16 +1120,9 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set @@ -1131,6 +1154,7 @@ CONFIG_RTC_DRV_MAX6900=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set # # SPI RTC drivers @@ -1140,9 +1164,10 @@ CONFIG_RTC_DRV_MAX6900=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -1150,6 +1175,7 @@ CONFIG_RTC_DRV_MAX6900=y # # on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -1175,12 +1201,10 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1223,8 +1247,10 @@ CONFIG_TMPFS=y # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1269,7 +1295,6 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -1285,7 +1310,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -1299,6 +1323,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SAMPLES is not set # CONFIG_BOOTX_TEXT is not set @@ -1310,5 +1335,49 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_SEQIV is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig index 7994955c29d3..7a64c564f6e6 100644 --- a/arch/powerpc/configs/ps3_defconfig +++ b/arch/powerpc/configs/ps3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc8 -# Wed Jan 16 14:31:21 2008 +# Linux kernel version: 2.6.25-rc6 +# Thu Mar 20 11:07:04 2008 # CONFIG_PPC64=y @@ -28,6 +28,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -51,7 +52,6 @@ CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set -# CONFIG_PPC_OF_PLATFORM_PCI is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -68,17 +68,21 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_USER_SCHED is not set +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -92,17 +96,27 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -131,6 +145,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support @@ -141,8 +156,8 @@ CONFIG_PPC_MULTIPLATFORM=y # CONFIG_PPC_86xx is not set # CONFIG_PPC_PSERIES is not set # CONFIG_PPC_ISERIES is not set -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set # CONFIG_PPC_PASEMI is not set @@ -173,6 +188,7 @@ CONFIG_PPC_CELL=y CONFIG_SPU_FS=y CONFIG_SPU_BASE=y # CONFIG_PQ2ADS is not set +# CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -184,7 +200,6 @@ CONFIG_SPU_BASE=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -199,15 +214,19 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set CONFIG_BINFMT_ELF=y +CONFIG_COMPAT_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_FORCE_MAX_ZONEORDER=13 # CONFIG_IOMMU_VMERGE is not set +CONFIG_IOMMU_HELPER=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set # CONFIG_IRQ_ALL_CPUS is not set @@ -241,7 +260,6 @@ CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set # CONFIG_SECCOMP is not set -# CONFIG_WANT_DEVICE_TREE is not set CONFIG_ISA_DMA_API=y # @@ -271,6 +289,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -338,6 +357,7 @@ CONFIG_IPV6_SIT=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set CONFIG_BT=m CONFIG_BT_L2CAP=m @@ -405,11 +425,13 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65535 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -472,7 +494,9 @@ CONFIG_MII=m # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set CONFIG_GELIC_NET=y +CONFIG_GELIC_WIRELESS=y # CONFIG_NETDEV_10000 is not set # @@ -482,9 +506,8 @@ CONFIG_GELIC_NET=y CONFIG_WLAN_80211=y # CONFIG_LIBERTAS is not set # CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set # CONFIG_HOSTAP is not set -CONFIG_ZD1211RW=m -# CONFIG_ZD1211RW_DEBUG is not set # # USB Network Adapters @@ -507,7 +530,6 @@ CONFIG_USB_NET_MCS7830=m # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -606,6 +628,7 @@ CONFIG_GEN_RTC=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -742,6 +765,10 @@ CONFIG_SND_PS3_DEFAULT_START_DELAY=2000 # # +# ALSA SoC audio for Freescale SOCs +# + +# # Open Sound System # # CONFIG_SOUND_PRIME is not set @@ -769,6 +796,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -782,10 +810,10 @@ CONFIG_USB_DEVICEFS=y # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=m -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y +# CONFIG_USB_EHCI_HCD_PPC_OF is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_HCD_PPC_OF is not set @@ -833,10 +861,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -862,19 +886,13 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -900,8 +918,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y @@ -910,7 +927,6 @@ CONFIG_PRINT_QUOTA_WARNING=y # CONFIG_QFMT_V1 is not set CONFIG_QFMT_V2=y CONFIG_QUOTACTL=y -CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m # CONFIG_FUSE_FS is not set @@ -959,8 +975,10 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1036,7 +1054,6 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -1048,15 +1065,12 @@ CONFIG_BITREVERSE=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -CONFIG_INSTRUMENTATION=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=m -# CONFIG_KPROBES is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -1087,9 +1101,9 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set CONFIG_DEBUG_LIST=y # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set CONFIG_DEBUG_STACKOVERFLOW=y @@ -1108,7 +1122,9 @@ CONFIG_IRQSTACKS=y # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_SEQIV=m CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set @@ -1120,12 +1136,15 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_CCM=m # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -1140,11 +1159,13 @@ CONFIG_CRYPTO_ARC4=m # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SALSA20=m # CONFIG_CRYPTO_DEFLATE is not set CONFIG_CRYPTO_MICHAEL_MIC=m # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_LZO=m CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index 92bbf51ad4f0..3e2593c60b12 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:49:15 2007 +# Linux kernel version: 2.6.25-rc6 +# Thu Mar 27 13:56:28 2008 # CONFIG_PPC64=y @@ -28,6 +28,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -71,8 +72,6 @@ CONFIG_TASKSTATS=y CONFIG_TASK_DELAY_ACCT=y CONFIG_TASK_XACCT=y CONFIG_TASK_IO_ACCOUNTING=y -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y CONFIG_AUDIT_TREE=y @@ -83,13 +82,18 @@ CONFIG_CGROUPS=y # CONFIG_CGROUP_DEBUG is not set CONFIG_CGROUP_NS=y CONFIG_CPUSETS=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_FAIR_USER_SCHED is not set -CONFIG_FAIR_CGROUP_SCHED=y +# CONFIG_GROUP_SCHED is not set CONFIG_CGROUP_CPUACCT=y +# CONFIG_RESOURCE_COUNTERS is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_PROC_PID_CPUSET=y # CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -103,11 +107,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -115,6 +121,16 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_MARKERS=y +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_KRETPROBES=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -142,6 +158,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support @@ -156,8 +173,8 @@ CONFIG_EEH=y CONFIG_SCANLOG=m CONFIG_LPARCFG=y # CONFIG_PPC_ISERIES is not set -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set # CONFIG_PPC_PASEMI is not set @@ -170,6 +187,7 @@ CONFIG_LPARCFG=y CONFIG_PPC_NATIVE=y # CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_XICS=y +# CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set CONFIG_PPC_I8259=y @@ -186,7 +204,6 @@ CONFIG_IBMEBUS=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -201,19 +218,24 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set CONFIG_BINFMT_ELF=y +CONFIG_COMPAT_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y CONFIG_IOMMU_VMERGE=y +CONFIG_IOMMU_HELPER=y CONFIG_HOTPLUG_CPU=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set +# CONFIG_PHYP_DUMP is not set CONFIG_IRQ_ALL_CPUS=y CONFIG_NUMA=y CONFIG_NODES_SHIFT=4 @@ -245,9 +267,7 @@ CONFIG_SCHED_SMT=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -CONFIG_SUSPEND_SMP_POSSIBLE=y CONFIG_SECCOMP=y -# CONFIG_WANT_DEVICE_TREE is not set CONFIG_ISA_DMA_API=y # @@ -262,7 +282,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set CONFIG_HOTPLUG_PCI=m @@ -288,6 +308,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -322,14 +343,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # -CONFIG_NETFILTER_NETLINK=y +CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m -CONFIG_NF_CONNTRACK_ENABLED=m CONFIG_NF_CONNTRACK=m CONFIG_NF_CT_ACCT=y CONFIG_NF_CONNTRACK_MARK=y @@ -351,6 +372,7 @@ CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m @@ -361,14 +383,17 @@ CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATE=m @@ -386,13 +411,10 @@ CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m @@ -403,7 +425,6 @@ CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_NF_NAT_FTP=m CONFIG_NF_NAT_IRC=m @@ -439,6 +460,7 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -493,7 +515,7 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -501,16 +523,19 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set @@ -522,12 +547,12 @@ CONFIG_IDE_PROC_FS=y # CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y # # PCI IDE chipsets support # CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y @@ -558,7 +583,6 @@ CONFIG_BLK_DEV_AMD74XX=y # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y CONFIG_IDE_ARCH_OBSOLETE_INIT=y # CONFIG_BLK_DEV_HD is not set @@ -627,6 +651,7 @@ CONFIG_SCSI_IBMVSCSI=y # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 @@ -685,6 +710,7 @@ CONFIG_ATA=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set @@ -699,6 +725,7 @@ CONFIG_ATA=y # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set CONFIG_PATA_WINBOND=y +# CONFIG_PATA_PLATFORM is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y @@ -737,7 +764,6 @@ CONFIG_BONDING=m # CONFIG_EQUALIZER is not set CONFIG_TUN=m # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -769,6 +795,7 @@ CONFIG_E100=y # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -783,6 +810,9 @@ CONFIG_E1000=y # CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -811,6 +841,7 @@ CONFIG_S2IO=m # CONFIG_PASEMI_MAC is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set CONFIG_TR=y CONFIG_IBMOL=y # CONFIG_3C359 is not set @@ -847,7 +878,6 @@ CONFIG_PPPOE=m # CONFIG_SLIP is not set CONFIG_SLHC=m # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y # CONFIG_NETCONSOLE_DYNAMIC is not set CONFIG_NETPOLL=y @@ -927,6 +957,7 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -951,7 +982,6 @@ CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_PRINTER is not set # CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set CONFIG_HVC_DRIVER=y CONFIG_HVC_CONSOLE=y CONFIG_HVC_RTAS=y @@ -1009,13 +1039,12 @@ CONFIG_I2C_ALGOBIT=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1031,6 +1060,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -1166,6 +1196,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -1179,9 +1210,9 @@ CONFIG_USB_DEVICE_CLASS=y # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EHCI_HCD_PPC_OF is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_PPC_OF is not set @@ -1230,10 +1261,6 @@ CONFIG_USB_MON=y # USB port drivers # # CONFIG_USB_USS720 is not set - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1259,16 +1286,9 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set CONFIG_INFINIBAND=m CONFIG_INFINIBAND_USER_MAD=m @@ -1281,6 +1301,7 @@ CONFIG_INFINIBAND_MTHCA_DEBUG=y CONFIG_INFINIBAND_EHCA=m # CONFIG_INFINIBAND_AMSO1100 is not set # CONFIG_MLX4_INFINIBAND is not set +# CONFIG_INFINIBAND_NES is not set CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_IPOIB_CM is not set CONFIG_INFINIBAND_IPOIB_DEBUG=y @@ -1289,6 +1310,7 @@ CONFIG_INFINIBAND_SRP=m # CONFIG_INFINIBAND_ISER is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # @@ -1334,12 +1356,10 @@ CONFIG_XFS_POSIX_ACL=y CONFIG_OCFS2_FS=m CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m @@ -1388,8 +1408,10 @@ CONFIG_CONFIGFS_FS=m # CONFIG_EFS_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1473,7 +1495,6 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -1487,6 +1508,8 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m @@ -1495,11 +1518,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -CONFIG_INSTRUMENTATION=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=y -CONFIG_KPROBES=y -CONFIG_MARKERS=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1518,6 +1537,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1530,9 +1550,10 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_KPROBES_SANITY_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set @@ -1557,7 +1578,9 @@ CONFIG_VIRQ_DEBUG=y # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_SEQIV=m CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y @@ -1570,12 +1593,15 @@ CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m -# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_CCM=m # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -1591,11 +1617,13 @@ CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m # CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_TEST=m -# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/sbc8641d_defconfig b/arch/powerpc/configs/sbc8641d_defconfig new file mode 100644 index 000000000000..3180125aa6c4 --- /dev/null +++ b/arch/powerpc/configs/sbc8641d_defconfig @@ -0,0 +1,1342 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.25-rc6 +# Thu Apr 10 18:03:25 2008 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +CONFIG_6xx=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_PPC_FPU=y +CONFIG_ALTIVEC=y +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_LOCKBREAK=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +CONFIG_GENERIC_TBSYNC=y +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y + +# +# Platform support +# +# CONFIG_PPC_MULTIPLATFORM is not set +# CONFIG_PPC_82xx is not set +# CONFIG_PPC_83xx is not set +CONFIG_PPC_86xx=y +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +# CONFIG_MPC8641_HPCN is not set +CONFIG_SBC8641D=y +# CONFIG_MPC8610_HPCD is not set +CONFIG_MPC8641=y +# CONFIG_IPIC is not set +CONFIG_MPIC=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_FSL_ULI1575 is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=m +CONFIG_FORCE_MAX_ZONEORDER=11 +# CONFIG_IOMMU_HELPER is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_IRQ_ALL_CPUS=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_PROC_DEVICETREE is not set +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +CONFIG_FSL_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCIEAER=y +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=m +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +# CONFIG_IP_NF_MATCH_AH is not set +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_ECN=m +# CONFIG_IP_NF_TARGET_TTL is not set +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +# CONFIG_IP6_NF_MATCH_AH is not set +# CONFIG_IP6_NF_MATCH_MH is not set +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_LOG=m +# CONFIG_IP6_NF_TARGET_REJECT is not set +CONFIG_IP6_NF_MANGLE=m +# CONFIG_IP6_NF_TARGET_HL is not set +CONFIG_IP6_NF_RAW=m + +# +# Bridge: Netfilter Configuration +# +# CONFIG_BRIDGE_NF_EBTABLES is not set +# CONFIG_IP_DCCP is not set +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +CONFIG_SCTP_HMAC_MD5=y +CONFIG_TIPC=m +# CONFIG_TIPC_ADVANCED is not set +# CONFIG_TIPC_DEBUG is not set +CONFIG_ATM=m +CONFIG_ATM_CLIP=m +# CONFIG_ATM_CLIP_NO_ICMP is not set +CONFIG_ATM_LANE=m +CONFIG_ATM_MPOA=m +CONFIG_ATM_BR2684=m +# CONFIG_ATM_BR2684_IPFILTER is not set +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +CONFIG_WAN_ROUTER=m +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_ATM=m +CONFIG_NET_SCH_PRIO=m +# CONFIG_NET_SCH_RR is not set +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m + +# +# Classification +# +CONFIG_NET_CLS=y +# CONFIG_NET_CLS_BASIC is not set +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_ROUTE=y +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +# CONFIG_CLS_U32_PERF is not set +# CONFIG_CLS_U32_MARK is not set +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +# CONFIG_NET_CLS_FLOW is not set +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_CLS_ACT is not set +# CONFIG_NET_CLS_IND is not set +CONFIG_NET_SCH_FIFO=y + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_OF_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +# CONFIG_MTD_CFI_NOSWAP is not set +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +CONFIG_MTD_CFI_LE_BYTE_SWAP=y +# CONFIG_MTD_CFI_GEOMETRY is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +CONFIG_MD_RAID10=y +# CONFIG_MD_RAID456 is not set +CONFIG_MD_MULTIPATH=y +CONFIG_MD_FAULTY=y +CONFIG_BLK_DEV_DM=y +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=y +CONFIG_DM_SNAPSHOT=y +CONFIG_DM_MIRROR=y +CONFIG_DM_ZERO=y +# CONFIG_DM_MULTIPATH is not set +# CONFIG_DM_DELAY is not set +# CONFIG_DM_UEVENT is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_DUMMY=m +CONFIG_BONDING=m +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +CONFIG_BROADCOM_PHY=y +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_GIANFAR=y +# CONFIG_GFAR_NAPI is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +CONFIG_ATM_DRIVERS=y +# CONFIG_ATM_DUMMY is not set +# CONFIG_ATM_TCP is not set +# CONFIG_ATM_LANAI is not set +# CONFIG_ATM_ENI is not set +# CONFIG_ATM_FIRESTREAM is not set +# CONFIG_ATM_ZATM is not set +# CONFIG_ATM_NICSTAR is not set +# CONFIG_ATM_IDT77252 is not set +# CONFIG_ATM_AMBASSADOR is not set +# CONFIG_ATM_HORIZON is not set +# CONFIG_ATM_IA is not set +# CONFIG_ATM_FORE200E_MAYBE is not set +# CONFIG_ATM_HE is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +CONFIG_PPPOE=m +CONFIG_PPPOATM=m +# CONFIG_PPPOL2TP is not set +CONFIG_SLIP=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLHC=m +CONFIG_SLIP_SMART=y +CONFIG_SLIP_MODE_SLIP6=y +CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set +CONFIG_NETPOLL=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_PCI is not set +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_OF_PLATFORM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +CONFIG_SOFT_WATCHDOG=m + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_VGA_CONSOLE=y +# CONFIG_VGACON_SOFT_SCROLLBACK is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +# CONFIG_REISERFS_FS_SECURITY is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +CONFIG_OCFS2_FS=m +CONFIG_OCFS2_DEBUG_MASKLOG=y +# CONFIG_OCFS2_DEBUG_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_AUTOFS_FS=m +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=m + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=m +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=m +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_NFS_DIRECTIO=y +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +CONFIG_SMB_NLS_DEFAULT=y +CONFIG_SMB_NLS_REMOTE="cp437" +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_DEBUGGER=y +# CONFIG_XMON is not set +# CONFIG_VIRQ_DEBUG is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +CONFIG_SECURITY_NETWORK=y +# CONFIG_SECURITY_NETWORK_XFRM is not set +CONFIG_SECURITY_CAPABILITIES=y +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_CAMELLIA is not set +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_AUTHENC=m +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig index a034a5e452ef..fdbfd39a3aca 100644 --- a/arch/powerpc/configs/storcenter_defconfig +++ b/arch/powerpc/configs/storcenter_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc6 -# Tue Jan 8 09:33:54 2008 +# Linux kernel version: 2.6.25-rc7 +# Mon Mar 31 11:37:19 2008 # # CONFIG_PPC64 is not set @@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -66,17 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y @@ -87,11 +90,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -99,6 +104,13 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -126,6 +138,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y # # Platform support @@ -136,10 +149,10 @@ CONFIG_PPC_MULTIPLATFORM=y # CONFIG_PPC_86xx is not set CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set +# CONFIG_MPC5121_ADS is not set # CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set -# CONFIG_PPC_EFIKA is not set -# CONFIG_PPC_LITE5200 is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set @@ -153,6 +166,7 @@ CONFIG_STORCENTER=y CONFIG_MPC10X_BRIDGE=y CONFIG_MPC10X_OPENPIC=y # CONFIG_MPC10X_STORE_GATHERING is not set +# CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -164,7 +178,6 @@ CONFIG_MPIC=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_TAU is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -180,12 +193,16 @@ CONFIG_HZ_100=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=100 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -206,11 +223,7 @@ CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS0,115200" # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y # CONFIG_SECCOMP is not set -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="storcenter.dts" CONFIG_ISA_DMA_API=y # @@ -310,6 +323,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -343,6 +357,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_OF_PARTS is not set # # User Modules And Translation Layers @@ -438,12 +453,14 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y @@ -460,12 +477,12 @@ CONFIG_IDE_PROC_FS=y # CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y # # PCI IDE chipsets support # CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set @@ -495,7 +512,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_TRM290 is not set CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y CONFIG_IDE_ARCH_OBSOLETE_INIT=y # CONFIG_BLK_DEV_HD is not set @@ -563,6 +579,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -603,7 +620,6 @@ CONFIG_DUMMY=m # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_NET_ETHERNET is not set CONFIG_NETDEV_1000=y @@ -611,6 +627,9 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -623,6 +642,7 @@ CONFIG_R8169=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_GIANFAR is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set @@ -649,7 +669,6 @@ CONFIG_R8169=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -672,6 +691,7 @@ CONFIG_R8169=y # # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -697,8 +717,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m CONFIG_NVRAM=y -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set +# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -746,14 +765,12 @@ CONFIG_I2C_MPC=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_M41T00 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -769,6 +786,7 @@ CONFIG_I2C_MPC=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -814,6 +832,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -827,9 +846,10 @@ CONFIG_USB_DEVICE_CLASS=y # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EHCI_FSL is not set +CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_PPC_OF is not set @@ -877,10 +897,6 @@ CONFIG_USB_STORAGE=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -906,16 +922,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set @@ -947,6 +956,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set # # SPI RTC drivers @@ -956,9 +966,10 @@ CONFIG_RTC_DRV_DS1307=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -966,6 +977,7 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -995,12 +1007,10 @@ CONFIG_XFS_FS=m # CONFIG_XFS_RT is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1053,8 +1063,10 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set @@ -1121,7 +1133,6 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -1139,9 +1150,6 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -1155,6 +1163,7 @@ CONFIG_INSTRUMENTATION=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set # CONFIG_BOOTX_TEXT is not set diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index c1baf9d5903f..9177b21b1a95 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -12,7 +12,7 @@ CFLAGS_prom_init.o += -fPIC CFLAGS_btext.o += -fPIC endif -obj-y := semaphore.o cputable.o ptrace.o syscalls.o \ +obj-y := cputable.o ptrace.o syscalls.o \ irq.o align.o signal_32.o pmc.o vdso.o \ init_task.o process.o systbl.o idle.o \ signal.o @@ -67,6 +67,7 @@ obj-$(CONFIG_BOOTX_TEXT) += btext.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_KPROBES) += kprobes.o obj-$(CONFIG_PPC_UDBG_16550) += legacy_serial.o udbg_16550.o +obj-$(CONFIG_STACKTRACE) += stacktrace.o pci64-$(CONFIG_PPC64) += pci_dn.o isa-bridge.o obj-$(CONFIG_PCI) += pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \ @@ -105,4 +106,13 @@ PHONY += systbl_chk systbl_chk: $(src)/systbl_chk.sh $(obj)/systbl_chk.i $(call cmd,systbl_chk) +$(obj)/built-in.o: prom_init_check + +quiet_cmd_prom_init_check = CALL $< + cmd_prom_init_check = $(CONFIG_SHELL) $< "$(NM)" "$(obj)/prom_init.o" + +PHONY += prom_init_check +prom_init_check: $(src)/prom_init_check.sh $(obj)/prom_init.o + $(call cmd,prom_init_check) + clean-files := vmlinux.lds diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 4b749c416464..62134845af08 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -23,11 +23,12 @@ #include <linux/mm.h> #include <linux/suspend.h> #include <linux/hrtimer.h> +#ifdef CONFIG_KVM +#include <linux/kvm_host.h> +#endif #ifdef CONFIG_PPC64 #include <linux/time.h> #include <linux/hardirq.h> -#else -#include <linux/ptrace.h> #endif #include <asm/io.h> @@ -46,6 +47,9 @@ #include <asm/mmu.h> #include <asm/hvcall.h> #endif +#ifdef CONFIG_PPC_ISERIES +#include <asm/iseries/alpaca.h> +#endif #define DEFINE(sym, val) \ asm volatile("\n->" #sym " %0 " #val : : "i" (val)) @@ -60,7 +64,6 @@ int main(void) DEFINE(AUDITCONTEXT, offsetof(struct task_struct, audit_context)); #else DEFINE(THREAD_INFO, offsetof(struct task_struct, stack)); - DEFINE(PTRACE, offsetof(struct task_struct, ptrace)); #endif /* CONFIG_PPC64 */ DEFINE(KSP, offsetof(struct thread_struct, ksp)); @@ -80,7 +83,6 @@ int main(void) DEFINE(PGDIR, offsetof(struct thread_struct, pgdir)); #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) DEFINE(THREAD_DBCR0, offsetof(struct thread_struct, dbcr0)); - DEFINE(PT_PTRACED, PT_PTRACED); #endif #ifdef CONFIG_SPE DEFINE(THREAD_EVR0, offsetof(struct thread_struct, evr[0])); @@ -94,10 +96,7 @@ int main(void) DEFINE(TI_LOCAL_FLAGS, offsetof(struct thread_info, local_flags)); DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count)); DEFINE(TI_TASK, offsetof(struct thread_info, task)); -#ifdef CONFIG_PPC32 - DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain)); DEFINE(TI_CPU, offsetof(struct thread_info, cpu)); -#endif /* CONFIG_PPC32 */ #ifdef CONFIG_PPC64 DEFINE(DCACHEL1LINESIZE, offsetof(struct ppc64_caches, dline_size)); @@ -166,13 +165,9 @@ int main(void) /* Interrupt register frame */ DEFINE(STACK_FRAME_OVERHEAD, STACK_FRAME_OVERHEAD); -#ifndef CONFIG_PPC64 - DEFINE(INT_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs)); -#else /* CONFIG_PPC64 */ + DEFINE(INT_FRAME_SIZE, STACK_INT_FRAME_SIZE); +#ifdef CONFIG_PPC64 DEFINE(SWITCH_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs)); - /* 288 = # of volatile regs, int & fp, for leaf routines */ - /* which do not stack a frame. See the PPC64 ABI. */ - DEFINE(INT_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs) + 288); /* Create extra stack space for SRR0 and SRR1 when calling prom/rtas. */ DEFINE(PROM_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs) + 16); DEFINE(RTAS_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs) + 16); @@ -325,9 +320,37 @@ int main(void) DEFINE(PAGE_OFFSET_VSID, KERNEL_VSID(PAGE_OFFSET)); DEFINE(VMALLOC_START_ESID, GET_ESID(VMALLOC_START)); DEFINE(VMALLOC_START_VSID, KERNEL_VSID(VMALLOC_START)); + + /* alpaca */ + DEFINE(ALPACA_SIZE, sizeof(struct alpaca)); #endif DEFINE(PGD_TABLE_SIZE, PGD_TABLE_SIZE); +#ifdef CONFIG_KVM + DEFINE(TLBE_BYTES, sizeof(struct tlbe)); + + DEFINE(VCPU_HOST_STACK, offsetof(struct kvm_vcpu, arch.host_stack)); + DEFINE(VCPU_HOST_PID, offsetof(struct kvm_vcpu, arch.host_pid)); + DEFINE(VCPU_HOST_TLB, offsetof(struct kvm_vcpu, arch.host_tlb)); + DEFINE(VCPU_SHADOW_TLB, offsetof(struct kvm_vcpu, arch.shadow_tlb)); + DEFINE(VCPU_GPRS, offsetof(struct kvm_vcpu, arch.gpr)); + DEFINE(VCPU_LR, offsetof(struct kvm_vcpu, arch.lr)); + DEFINE(VCPU_CR, offsetof(struct kvm_vcpu, arch.cr)); + DEFINE(VCPU_XER, offsetof(struct kvm_vcpu, arch.xer)); + DEFINE(VCPU_CTR, offsetof(struct kvm_vcpu, arch.ctr)); + DEFINE(VCPU_PC, offsetof(struct kvm_vcpu, arch.pc)); + DEFINE(VCPU_MSR, offsetof(struct kvm_vcpu, arch.msr)); + DEFINE(VCPU_SPRG4, offsetof(struct kvm_vcpu, arch.sprg4)); + DEFINE(VCPU_SPRG5, offsetof(struct kvm_vcpu, arch.sprg5)); + DEFINE(VCPU_SPRG6, offsetof(struct kvm_vcpu, arch.sprg6)); + DEFINE(VCPU_SPRG7, offsetof(struct kvm_vcpu, arch.sprg7)); + DEFINE(VCPU_PID, offsetof(struct kvm_vcpu, arch.pid)); + + DEFINE(VCPU_LAST_INST, offsetof(struct kvm_vcpu, arch.last_inst)); + DEFINE(VCPU_FAULT_DEAR, offsetof(struct kvm_vcpu, arch.fault_dear)); + DEFINE(VCPU_FAULT_ESR, offsetof(struct kvm_vcpu, arch.fault_esr)); +#endif + return 0; } diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c index 80e2eef05b2e..9f9377745490 100644 --- a/arch/powerpc/kernel/btext.c +++ b/arch/powerpc/kernel/btext.c @@ -7,6 +7,7 @@ #include <linux/string.h> #include <linux/init.h> #include <linux/module.h> +#include <linux/lmb.h> #include <asm/sections.h> #include <asm/prom.h> @@ -15,7 +16,7 @@ #include <asm/mmu.h> #include <asm/pgtable.h> #include <asm/io.h> -#include <asm/lmb.h> +#include <asm/prom.h> #include <asm/processor.h> #include <asm/udbg.h> diff --git a/arch/powerpc/kernel/cpu_setup_44x.S b/arch/powerpc/kernel/cpu_setup_44x.S index 6250443ab9c9..e3623e3e3451 100644 --- a/arch/powerpc/kernel/cpu_setup_44x.S +++ b/arch/powerpc/kernel/cpu_setup_44x.S @@ -3,7 +3,7 @@ * Valentine Barshak <vbarshak@ru.mvista.com> * MontaVista Software, Inc (c) 2007 * - * Based on cpu_setup_6xx code by + * Based on cpu_setup_6xx code by * Benjamin Herrenschmidt <benh@kernel.crashing.org> * * This program is free software; you can redistribute it and/or @@ -32,6 +32,8 @@ _GLOBAL(__setup_cpu_440grx) bl __fixup_440A_mcheck mtlr r4 blr +_GLOBAL(__setup_cpu_460ex) + b __init_fpu_44x _GLOBAL(__setup_cpu_440gx) _GLOBAL(__setup_cpu_440spe) b __fixup_440A_mcheck diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S index f1ee0b3f78f2..72d1d7395254 100644 --- a/arch/powerpc/kernel/cpu_setup_6xx.S +++ b/arch/powerpc/kernel/cpu_setup_6xx.S @@ -17,7 +17,13 @@ #include <asm/cache.h> _GLOBAL(__setup_cpu_603) - b setup_common_caches + mflr r4 +BEGIN_FTR_SECTION + bl __init_fpu_registers +END_FTR_SECTION_IFCLR(CPU_FTR_FPU_UNAVAILABLE) + bl setup_common_caches + mtlr r4 + blr _GLOBAL(__setup_cpu_604) mflr r4 bl setup_common_caches diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 2a8f5cc5184f..36080d4d1922 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -36,6 +36,7 @@ extern void __setup_cpu_440epx(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_440gx(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_440grx(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_440spe(unsigned long offset, struct cpu_spec* spec); +extern void __setup_cpu_460ex(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_603(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_604(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_750(unsigned long offset, struct cpu_spec* spec); @@ -1397,6 +1398,29 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_440A, .platform = "ppc440", }, + { /* 460EX */ + .pvr_mask = 0xffff0002, + .pvr_value = 0x13020002, + .cpu_name = "460EX", + .cpu_features = CPU_FTRS_44X, + .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU, + .icache_bsize = 32, + .dcache_bsize = 32, + .cpu_setup = __setup_cpu_460ex, + .machine_check = machine_check_440A, + .platform = "ppc440", + }, + { /* 460GT */ + .pvr_mask = 0xffff0002, + .pvr_value = 0x13020000, + .cpu_name = "460GT", + .cpu_features = CPU_FTRS_44X, + .cpu_user_features = COMMON_USER_BOOKE, + .icache_bsize = 32, + .dcache_bsize = 32, + .machine_check = machine_check_440A, + .platform = "ppc440", + }, #endif /* CONFIG_44x */ #ifdef CONFIG_FSL_BOOKE #ifdef CONFIG_E200 @@ -1512,7 +1536,7 @@ struct cpu_spec * __init identify_cpu(unsigned long offset, unsigned int pvr) *t = *s; *PTRRELOC(&cur_cpu_spec) = &the_cpu_spec; #if defined(CONFIG_PPC64) || defined(CONFIG_BOOKE) - /* ppc64 and booke expect identify_cpu to also call + /* ppc64 and booke expect identify_cpu to also call * setup_cpu for that processor. I will consolidate * that at a later time, for now, just use #ifdef. * we also don't need to PTRRELOC the function pointer diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c index 571132ed12c1..eae401de3f76 100644 --- a/arch/powerpc/kernel/crash.c +++ b/arch/powerpc/kernel/crash.c @@ -24,12 +24,13 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/types.h> +#include <linux/lmb.h> #include <asm/processor.h> #include <asm/machdep.h> #include <asm/kexec.h> #include <asm/kdump.h> -#include <asm/lmb.h> +#include <asm/prom.h> #include <asm/firmware.h> #include <asm/smp.h> #include <asm/system.h> diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c index 29ff77c468ac..9ee3c5278db0 100644 --- a/arch/powerpc/kernel/crash_dump.c +++ b/arch/powerpc/kernel/crash_dump.c @@ -13,8 +13,9 @@ #include <linux/crash_dump.h> #include <linux/bootmem.h> +#include <linux/lmb.h> #include <asm/kdump.h> -#include <asm/lmb.h> +#include <asm/prom.h> #include <asm/firmware.h> #include <asm/uaccess.h> diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 69a91bd46115..84c868633068 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -110,9 +110,9 @@ transfer_to_handler: stw r11,PT_REGS(r12) #if defined(CONFIG_40x) || defined(CONFIG_BOOKE) /* Check to see if the dbcr0 register is set up to debug. Use the - single-step bit to do this. */ + internal debug mode bit to do this. */ lwz r12,THREAD_DBCR0(r12) - andis. r12,r12,DBCR0_IC@h + andis. r12,r12,DBCR0_IDM@h beq+ 3f /* From user and task is ptraced - load up global dbcr0 */ li r12,-1 /* clear all pending debug events */ @@ -120,6 +120,12 @@ transfer_to_handler: lis r11,global_dbcr0@ha tophys(r11,r11) addi r11,r11,global_dbcr0@l +#ifdef CONFIG_SMP + rlwinm r9,r1,0,0,(31-THREAD_SHIFT) + lwz r9,TI_CPU(r9) + slwi r9,r9,3 + add r11,r11,r9 +#endif lwz r12,0(r11) mtspr SPRN_DBCR0,r12 lwz r12,4(r11) @@ -238,10 +244,10 @@ ret_from_syscall: stw r11,_CCR(r1) syscall_exit_cont: #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) - /* If the process has its own DBCR0 value, load it up. The single - step bit tells us that dbcr0 should be loaded. */ + /* If the process has its own DBCR0 value, load it up. The internal + debug mode bit tells us that dbcr0 should be loaded. */ lwz r0,THREAD+THREAD_DBCR0(r2) - andis. r10,r0,DBCR0_IC@h + andis. r10,r0,DBCR0_IDM@h bnel- load_dbcr0 #endif #ifdef CONFIG_44x @@ -666,10 +672,10 @@ user_exc_return: /* r10 contains MSR_KERNEL here */ restore_user: #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) - /* Check whether this process has its own DBCR0 value. The single - step bit tells us that dbcr0 should be loaded. */ + /* Check whether this process has its own DBCR0 value. The internal + debug mode bit tells us that dbcr0 should be loaded. */ lwz r0,THREAD+THREAD_DBCR0(r2) - andis. r10,r0,DBCR0_IC@h + andis. r10,r0,DBCR0_IDM@h bnel- load_dbcr0 #endif @@ -879,6 +885,12 @@ load_dbcr0: mfspr r10,SPRN_DBCR0 lis r11,global_dbcr0@ha addi r11,r11,global_dbcr0@l +#ifdef CONFIG_SMP + rlwinm r9,r1,0,0,(31-THREAD_SHIFT) + lwz r9,TI_CPU(r9) + slwi r9,r9,3 + add r11,r11,r9 +#endif stw r10,0(r11) mtspr SPRN_DBCR0,r0 lwz r10,4(r11) @@ -891,7 +903,7 @@ load_dbcr0: .section .bss .align 4 global_dbcr0: - .space 8 + .space 8*NR_CPUS .previous #endif /* !(CONFIG_4xx || CONFIG_BOOKE) */ diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 148a3547c9aa..c0db5b769e55 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -29,6 +29,8 @@ #include <asm/cputable.h> #include <asm/firmware.h> #include <asm/bug.h> +#include <asm/ptrace.h> +#include <asm/irqflags.h> /* * System calls. @@ -39,7 +41,7 @@ /* This value is used to mark exception frames on the stack. */ exception_marker: - .tc ID_72656773_68657265[TC],0x7265677368657265 + .tc ID_EXC_MARKER[TC],STACK_FRAME_REGS_MARKER .section ".text" .align 7 @@ -88,6 +90,14 @@ system_call_common: addi r9,r1,STACK_FRAME_OVERHEAD ld r11,exception_marker@toc(r2) std r11,-16(r9) /* "regshere" marker */ +#ifdef CONFIG_TRACE_IRQFLAGS + bl .trace_hardirqs_on + REST_GPR(0,r1) + REST_4GPRS(3,r1) + REST_2GPRS(7,r1) + addi r9,r1,STACK_FRAME_OVERHEAD + ld r12,_MSR(r1) +#endif /* CONFIG_TRACE_IRQFLAGS */ li r10,1 stb r10,PACASOFTIRQEN(r13) stb r10,PACAHARDIRQEN(r13) @@ -102,7 +112,7 @@ BEGIN_FW_FTR_SECTION b hardware_interrupt_entry 2: END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) -#endif +#endif /* CONFIG_PPC_ISERIES */ mfmsr r11 ori r11,r11,MSR_EE mtmsrd r11,1 @@ -504,6 +514,10 @@ BEGIN_FW_FTR_SECTION li r3,0 stb r3,PACASOFTIRQEN(r13) /* ensure we are soft-disabled */ +#ifdef CONFIG_TRACE_IRQFLAGS + bl .trace_hardirqs_off + mfmsr r10 +#endif ori r10,r10,MSR_EE mtmsrd r10 /* hard-enable again */ addi r3,r1,STACK_FRAME_OVERHEAD @@ -512,7 +526,7 @@ BEGIN_FW_FTR_SECTION 4: END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif - stb r5,PACASOFTIRQEN(r13) + TRACE_AND_RESTORE_IRQ(r5); /* extract EE bit and use it to restore paca->hard_enabled */ ld r3,_MSR(r1) @@ -580,6 +594,16 @@ do_work: bne restore /* here we are preempting the current task */ 1: +#ifdef CONFIG_TRACE_IRQFLAGS + bl .trace_hardirqs_on + /* Note: we just clobbered r10 which used to contain the previous + * MSR before the hard-disabling done by the caller of do_work. + * We don't have that value anymore, but it doesn't matter as + * we will hard-enable unconditionally, we can just reload the + * current MSR into r10 + */ + mfmsr r10 +#endif /* CONFIG_TRACE_IRQFLAGS */ li r0,1 stb r0,PACASOFTIRQEN(r13) stb r0,PACAHARDIRQEN(r13) diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index 0f4fac512020..785af9b56591 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -30,6 +30,7 @@ #include <asm/thread_info.h> #include <asm/ppc_asm.h> #include <asm/asm-offsets.h> +#include <asm/ptrace.h> /* 601 only have IBAT; cr0.eq is set on 601 when using this macro */ #define LOAD_BAT(n, reg, RA, RB) \ @@ -268,8 +269,8 @@ __secondary_hold_acknowledge: li r10,MSR_KERNEL & ~(MSR_IR|MSR_DR); /* can take exceptions */ \ MTMSRD(r10); /* (except for mach check in rtas) */ \ stw r0,GPR0(r11); \ - lis r10,0x7265; /* put exception frame marker */ \ - addi r10,r10,0x6773; \ + lis r10,STACK_FRAME_REGS_MARKER@ha; /* exception frame marker */ \ + addi r10,r10,STACK_FRAME_REGS_MARKER@l; \ stw r10,8(r11); \ SAVE_4GPRS(3, r11); \ SAVE_2GPRS(7, r11) @@ -763,23 +764,6 @@ load_up_altivec: b fast_exception_return /* - * AltiVec unavailable trap from kernel - print a message, but let - * the task use AltiVec in the kernel until it returns to user mode. - */ -KernelAltiVec: - lwz r3,_MSR(r1) - oris r3,r3,MSR_VEC@h - stw r3,_MSR(r1) /* enable use of AltiVec after return */ - lis r3,87f@h - ori r3,r3,87f@l - mr r4,r2 /* current */ - lwz r5,_NIP(r1) - bl printk - b ret_from_except -87: .string "AltiVec used in kernel (task=%p, pc=%x) \n" - .align 4,0 - -/* * giveup_altivec(tsk) * Disable AltiVec for the task given as the argument, * and save the AltiVec registers in its thread_struct. diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S index ad071a146a8d..b84ec6a2fc94 100644 --- a/arch/powerpc/kernel/head_44x.S +++ b/arch/powerpc/kernel/head_44x.S @@ -211,7 +211,7 @@ skpinv: addi r4,r4,1 /* Increment */ SET_IVOR(12, WatchdogTimer); SET_IVOR(13, DataTLBError); SET_IVOR(14, InstructionTLBError); - SET_IVOR(15, Debug); + SET_IVOR(15, DebugCrit); /* Establish the interrupt vector base */ lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */ @@ -578,7 +578,7 @@ interrupt_base: b InstructionStorage /* Debug Interrupt */ - DEBUG_EXCEPTION + DEBUG_CRIT_EXCEPTION /* * Local functions diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 11b4f6d9ffce..215973a2c8d5 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -36,8 +36,7 @@ #include <asm/firmware.h> #include <asm/page_64.h> #include <asm/exception.h> - -#define DO_SOFT_DISABLE +#include <asm/irqflags.h> /* * We layout physical memory as follows: @@ -450,8 +449,8 @@ bad_stack: */ fast_exc_return_irq: /* restores irq state too */ ld r3,SOFTE(r1) + TRACE_AND_RESTORE_IRQ(r3); ld r12,_MSR(r1) - stb r3,PACASOFTIRQEN(r13) /* restore paca->soft_enabled */ rldicl r4,r12,49,63 /* get MSR_EE to LSB */ stb r4,PACAHARDIRQEN(r13) /* restore paca->hard_enabled */ b 1f @@ -621,7 +620,7 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) mtlr r10 andi. r10,r12,MSR_RI /* check for unrecoverable exception */ - beq- unrecov_slb + beq- 2f .machine push .machine "power4" @@ -643,6 +642,22 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) rfid b . /* prevent speculative execution */ +2: +#ifdef CONFIG_PPC_ISERIES +BEGIN_FW_FTR_SECTION + b unrecov_slb +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) +#endif /* CONFIG_PPC_ISERIES */ + mfspr r11,SPRN_SRR0 + clrrdi r10,r13,32 + LOAD_HANDLER(r10,unrecov_slb) + mtspr SPRN_SRR0,r10 + mfmsr r10 + ori r10,r10,MSR_IR|MSR_DR|MSR_RI + mtspr SPRN_SRR1,r10 + rfid + b . + unrecov_slb: EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB) DISABLE_INTS @@ -808,7 +823,7 @@ _STATIC(load_up_altivec) * Hash table stuff */ .align 7 -_GLOBAL(do_hash_page) +_STATIC(do_hash_page) std r3,_DAR(r1) std r4,_DSISR(r1) @@ -820,6 +835,27 @@ BEGIN_FTR_SECTION END_FTR_SECTION_IFCLR(CPU_FTR_SLB) /* + * On iSeries, we soft-disable interrupts here, then + * hard-enable interrupts so that the hash_page code can spin on + * the hash_table_lock without problems on a shared processor. + */ + DISABLE_INTS + + /* + * Currently, trace_hardirqs_off() will be called by DISABLE_INTS + * and will clobber volatile registers when irq tracing is enabled + * so we need to reload them. It may be possible to be smarter here + * and move the irq tracing elsewhere but let's keep it simple for + * now + */ +#ifdef CONFIG_TRACE_IRQFLAGS + ld r3,_DAR(r1) + ld r4,_DSISR(r1) + ld r5,_TRAP(r1) + ld r12,_MSR(r1) + clrrdi r5,r5,4 +#endif /* CONFIG_TRACE_IRQFLAGS */ + /* * We need to set the _PAGE_USER bit if MSR_PR is set or if we are * accessing a userspace segment (even from the kernel). We assume * kernel addresses always have the high bit set. @@ -832,13 +868,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB) rlwimi r4,r5,22+2,31-2,31-2 /* Set _PAGE_EXEC if trap is 0x400 */ /* - * On iSeries, we soft-disable interrupts here, then - * hard-enable interrupts so that the hash_page code can spin on - * the hash_table_lock without problems on a shared processor. - */ - DISABLE_INTS - - /* * r3 contains the faulting address * r4 contains the required access permissions * r5 contains the trap number @@ -848,7 +877,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB) bl .hash_page /* build HPTE if possible */ cmpdi r3,0 /* see if hash_page succeeded */ -#ifdef DO_SOFT_DISABLE BEGIN_FW_FTR_SECTION /* * If we had interrupts soft-enabled at the point where the @@ -860,7 +888,7 @@ BEGIN_FW_FTR_SECTION */ beq 13f END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) -#endif + BEGIN_FW_FTR_SECTION /* * Here we have interrupts hard-disabled, so it is sufficient @@ -874,11 +902,12 @@ END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES) /* * hash_page couldn't handle it, set soft interrupt enable back - * to what it was before the trap. Note that .local_irq_restore + * to what it was before the trap. Note that .raw_local_irq_restore * handles any interrupts pending at this point. */ ld r3,SOFTE(r1) - bl .local_irq_restore + TRACE_AND_RESTORE_IRQ_PARTIAL(r3, 11f) + bl .raw_local_irq_restore b 11f /* Here we have a page fault that hash_page can't handle. */ @@ -1387,12 +1416,14 @@ __secondary_start: #ifdef CONFIG_PPC_ISERIES BEGIN_FW_FTR_SECTION ori r4,r4,MSR_EE + li r8,1 + stb r8,PACAHARDIRQEN(r13) END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif BEGIN_FW_FTR_SECTION - stb r7,PACASOFTIRQEN(r13) stb r7,PACAHARDIRQEN(r13) END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES) + stb r7,PACASOFTIRQEN(r13) mtspr SPRN_SRR0,r3 mtspr SPRN_SRR1,r4 @@ -1475,6 +1506,10 @@ _INIT_STATIC(start_here_multiplatform) addi r2,r2,0x4000 add r2,r2,r26 + /* Set initial ptr to current */ + LOAD_REG_IMMEDIATE(r4, init_task) + std r4,PACACURRENT(r13) + /* Do very early kernel initializations, including initial hash table, * stab and slb setup before we turn on relocation. */ @@ -1503,10 +1538,6 @@ _INIT_GLOBAL(start_here_common) li r0,0 stdu r0,-STACK_FRAME_OVERHEAD(r1) - /* ptr to current */ - LOAD_REG_IMMEDIATE(r4, init_task) - std r4,PACACURRENT(r13) - /* Load the TOC */ ld r2,PACATOC(r13) std r1,PACAKSAVE(r13) @@ -1520,15 +1551,14 @@ _INIT_GLOBAL(start_here_common) #ifdef CONFIG_PPC_ISERIES BEGIN_FW_FTR_SECTION mfmsr r5 - ori r5,r5,MSR_EE /* Hard Enabled */ + ori r5,r5,MSR_EE /* Hard Enabled on iSeries*/ mtmsrd r5 + li r5,1 END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif -BEGIN_FW_FTR_SECTION - stb r5,PACAHARDIRQEN(r13) -END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES) + stb r5,PACAHARDIRQEN(r13) /* Hard Disabled on others */ - bl .start_kernel + bl .start_kernel /* Not reached */ BUG_OPCODE diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S index f7458396cd7c..3c9452d4308b 100644 --- a/arch/powerpc/kernel/head_8xx.S +++ b/arch/powerpc/kernel/head_8xx.S @@ -332,8 +332,18 @@ InstructionTLBMiss: mfspr r11, SPRN_MD_TWC /* ....and get the pte address */ lwz r10, 0(r11) /* Get the pte */ +#ifdef CONFIG_SWAP + /* do not set the _PAGE_ACCESSED bit of a non-present page */ + andi. r11, r10, _PAGE_PRESENT + beq 4f + ori r10, r10, _PAGE_ACCESSED + mfspr r11, SPRN_MD_TWC /* get the pte address again */ + stw r10, 0(r11) +4: +#else ori r10, r10, _PAGE_ACCESSED stw r10, 0(r11) +#endif /* The Linux PTE won't go exactly into the MMU TLB. * Software indicator bits 21, 22 and 28 must be clear. @@ -398,8 +408,17 @@ DataStoreTLBMiss: DO_8xx_CPU6(0x3b80, r3) mtspr SPRN_MD_TWC, r11 - mfspr r11, SPRN_MD_TWC /* get the pte address again */ +#ifdef CONFIG_SWAP + /* do not set the _PAGE_ACCESSED bit of a non-present page */ + andi. r11, r10, _PAGE_PRESENT + beq 4f ori r10, r10, _PAGE_ACCESSED +4: + /* and update pte in table */ +#else + ori r10, r10, _PAGE_ACCESSED +#endif + mfspr r11, SPRN_MD_TWC /* get the pte address again */ stw r10, 0(r11) /* The Linux PTE won't go exactly into the MMU TLB. @@ -507,7 +526,16 @@ DataTLBError: /* Update 'changed', among others. */ +#ifdef CONFIG_SWAP + ori r10, r10, _PAGE_DIRTY|_PAGE_HWWRITE + /* do not set the _PAGE_ACCESSED bit of a non-present page */ + andi. r11, r10, _PAGE_PRESENT + beq 4f + ori r10, r10, _PAGE_ACCESSED +4: +#else ori r10, r10, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE +#endif mfspr r11, SPRN_MD_TWC /* Get pte address again */ stw r10, 0(r11) /* and update pte in table */ diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h index ba9393f8e77a..aefafc6330c9 100644 --- a/arch/powerpc/kernel/head_booke.h +++ b/arch/powerpc/kernel/head_booke.h @@ -56,8 +56,17 @@ * is necessary since the MMU is always on, for Book-E parts, and the stacks * are offset from KERNELBASE. * + * There is some space optimization to be had here if desired. However + * to allow for a common kernel with support for debug exceptions either + * going to critical or their own debug level we aren't currently + * providing configurations that micro-optimize space usage. */ -#define BOOKE_EXCEPTION_STACK_SIZE (8192) +#ifdef CONFIG_44x +#define NUM_EXCEPTION_LVLS 2 +#else +#define NUM_EXCEPTION_LVLS 3 +#endif +#define BOOKE_EXCEPTION_STACK_SIZE (4096 * NUM_EXCEPTION_LVLS) /* CRIT_SPRG only used in critical exception handling */ #define CRIT_SPRG SPRN_SPRG2 @@ -68,7 +77,7 @@ #define CRIT_STACK_TOP (exception_stack_top) /* only on e200 for now */ -#define DEBUG_STACK_TOP (exception_stack_top - 4096) +#define DEBUG_STACK_TOP (exception_stack_top - 8192) #define DEBUG_SPRG SPRN_SPRG6W #ifdef CONFIG_SMP @@ -212,9 +221,8 @@ label: * save (and later restore) the MSR via SPRN_CSRR1, which will still have * the MSR_DE bit set. */ -#ifdef CONFIG_E200 -#define DEBUG_EXCEPTION \ - START_EXCEPTION(Debug); \ +#define DEBUG_DEBUG_EXCEPTION \ + START_EXCEPTION(DebugDebug); \ DEBUG_EXCEPTION_PROLOG; \ \ /* \ @@ -234,8 +242,8 @@ label: cmplw r12,r10; \ blt+ 2f; /* addr below exception vectors */ \ \ - lis r10,Debug@h; \ - ori r10,r10,Debug@l; \ + lis r10,DebugDebug@h; \ + ori r10,r10,DebugDebug@l; \ cmplw r12,r10; \ bgt+ 2f; /* addr above exception vectors */ \ \ @@ -265,9 +273,9 @@ label: 2: mfspr r4,SPRN_DBSR; \ addi r3,r1,STACK_FRAME_OVERHEAD; \ EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, debug_transfer_to_handler, ret_from_debug_exc) -#else -#define DEBUG_EXCEPTION \ - START_EXCEPTION(Debug); \ + +#define DEBUG_CRIT_EXCEPTION \ + START_EXCEPTION(DebugCrit); \ CRITICAL_EXCEPTION_PROLOG; \ \ /* \ @@ -287,8 +295,8 @@ label: cmplw r12,r10; \ blt+ 2f; /* addr below exception vectors */ \ \ - lis r10,Debug@h; \ - ori r10,r10,Debug@l; \ + lis r10,DebugCrit@h; \ + ori r10,r10,DebugCrit@l; \ cmplw r12,r10; \ bgt+ 2f; /* addr above exception vectors */ \ \ @@ -318,7 +326,6 @@ label: 2: mfspr r4,SPRN_DBSR; \ addi r3,r1,STACK_FRAME_OVERHEAD; \ EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, crit_transfer_to_handler, ret_from_crit_exc) -#endif #define INSTRUCTION_STORAGE_EXCEPTION \ START_EXCEPTION(InstructionStorage) \ diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index d9cc2c288d9e..e581524d85bc 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -68,7 +68,9 @@ _ENTRY(_start); mr r29,r5 mr r28,r6 mr r27,r7 + li r25,0 /* phys kernel start (low) */ li r24,0 /* CPU number */ + li r23,0 /* phys kernel start (high) */ /* We try to not make any assumptions about how the boot loader * setup or used the TLBs. We invalidate all mappings from the @@ -167,7 +169,28 @@ skpinv: addi r6,r6,1 /* Increment */ mtspr SPRN_MAS0,r7 tlbre - /* Just modify the entry ID, EPN and RPN for the temp mapping */ + /* grab and fixup the RPN */ + mfspr r6,SPRN_MAS1 /* extract MAS1[SIZE] */ + rlwinm r6,r6,25,27,30 + li r8,-1 + addi r6,r6,10 + slw r6,r8,r6 /* convert to mask */ + + bl 1f /* Find our address */ +1: mflr r7 + + mfspr r8,SPRN_MAS3 +#ifdef CONFIG_PHYS_64BIT + mfspr r23,SPRN_MAS7 +#endif + and r8,r6,r8 + subfic r9,r6,-4096 + and r9,r9,r7 + + or r25,r8,r9 + ori r8,r25,(MAS3_SX|MAS3_SW|MAS3_SR) + + /* Just modify the entry ID and EPN for the temp mapping */ lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */ rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */ mtspr SPRN_MAS0,r7 @@ -177,12 +200,10 @@ skpinv: addi r6,r6,1 /* Increment */ ori r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_4K))@l mtspr SPRN_MAS1,r6 mfspr r6,SPRN_MAS2 - lis r7,PHYSICAL_START@h + li r7,0 /* temp EPN = 0 */ rlwimi r7,r6,0,20,31 mtspr SPRN_MAS2,r7 - mfspr r6,SPRN_MAS3 - rlwimi r7,r6,0,20,31 - mtspr SPRN_MAS3,r7 + mtspr SPRN_MAS3,r8 tlbwe xori r6,r4,1 @@ -232,8 +253,7 @@ skpinv: addi r6,r6,1 /* Increment */ ori r6,r6,PAGE_OFFSET@l rlwimi r6,r7,0,20,31 mtspr SPRN_MAS2,r6 - li r7,(MAS3_SX|MAS3_SW|MAS3_SR) - mtspr SPRN_MAS3,r7 + mtspr SPRN_MAS3,r8 tlbwe /* 7. Jump to KERNELBASE mapping */ @@ -283,7 +303,10 @@ skpinv: addi r6,r6,1 /* Increment */ SET_IVOR(12, WatchdogTimer); SET_IVOR(13, DataTLBError); SET_IVOR(14, InstructionTLBError); - SET_IVOR(15, Debug); + SET_IVOR(15, DebugDebug); +#if defined(CONFIG_E500) + SET_IVOR(15, DebugCrit); +#endif SET_IVOR(32, SPEUnavailable); SET_IVOR(33, SPEFloatingPointData); SET_IVOR(34, SPEFloatingPointRound); @@ -348,6 +371,17 @@ skpinv: addi r6,r6,1 /* Increment */ bl early_init +#ifdef CONFIG_RELOCATABLE + lis r3,kernstart_addr@ha + la r3,kernstart_addr@l(r3) +#ifdef CONFIG_PHYS_64BIT + stw r23,0(r3) + stw r25,4(r3) +#else + stw r25,0(r3) +#endif +#endif + mfspr r3,SPRN_TLB1CFG andi. r3,r3,0xfff lis r4,num_tlbcam_entries@ha @@ -718,7 +752,10 @@ interrupt_base: /* Debug Interrupt */ - DEBUG_EXCEPTION + DEBUG_DEBUG_EXCEPTION +#if defined(CONFIG_E500) + DEBUG_CRIT_EXCEPTION +#endif /* * Local functions diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c index 2f50bb5d00f9..9971159c8040 100644 --- a/arch/powerpc/kernel/ibmebus.c +++ b/arch/powerpc/kernel/ibmebus.c @@ -183,7 +183,7 @@ static int ibmebus_create_devices(const struct of_device_id *matches) ret = ibmebus_create_device(child); if (ret) { printk(KERN_ERR "%s: failed to create device (%i)", - __FUNCTION__, ret); + __func__, ret); of_node_put(child); break; } @@ -269,7 +269,7 @@ static ssize_t ibmebus_store_probe(struct bus_type *bus, if (bus_find_device(&ibmebus_bus_type, NULL, path, ibmebus_match_path)) { printk(KERN_WARNING "%s: %s has already been probed\n", - __FUNCTION__, path); + __func__, path); rc = -EEXIST; goto out; } @@ -279,7 +279,7 @@ static ssize_t ibmebus_store_probe(struct bus_type *bus, of_node_put(dn); } else { printk(KERN_WARNING "%s: no such device node: %s\n", - __FUNCTION__, path); + __func__, path); rc = -ENODEV; } @@ -308,7 +308,7 @@ static ssize_t ibmebus_store_remove(struct bus_type *bus, return count; } else { printk(KERN_WARNING "%s: %s not on the bus\n", - __FUNCTION__, path); + __func__, path); kfree(path); return -ENODEV; @@ -337,14 +337,14 @@ static int __init ibmebus_bus_init(void) err = of_bus_type_init(&ibmebus_bus_type, "ibmebus"); if (err) { printk(KERN_ERR "%s: failed to register IBM eBus.\n", - __FUNCTION__); + __func__); return err; } err = device_register(&ibmebus_bus_device); if (err) { printk(KERN_WARNING "%s: device_register returned %i\n", - __FUNCTION__, err); + __func__, err); bus_unregister(&ibmebus_bus_type); return err; diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c index 8f1f4e539c4b..0c663669bc32 100644 --- a/arch/powerpc/kernel/iommu.c +++ b/arch/powerpc/kernel/iommu.c @@ -520,7 +520,7 @@ void iommu_free_table(struct iommu_table *tbl, const char *node_name) unsigned int order; if (!tbl || !tbl->it_map) { - printk(KERN_ERR "%s: expected TCE map for %s\n", __FUNCTION__, + printk(KERN_ERR "%s: expected TCE map for %s\n", __func__, node_name); return; } @@ -530,7 +530,7 @@ void iommu_free_table(struct iommu_table *tbl, const char *node_name) for (i = 0; i < (tbl->it_size/64); i++) { if (tbl->it_map[i] != 0) { printk(KERN_WARNING "%s: Unexpected TCEs for %s\n", - __FUNCTION__, node_name); + __func__, node_name); break; } } diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index b0e5deb4274f..425616f92d18 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -114,7 +114,7 @@ static inline void set_soft_enabled(unsigned long enable) : : "r" (enable), "i" (offsetof(struct paca_struct, soft_enabled))); } -void local_irq_restore(unsigned long en) +void raw_local_irq_restore(unsigned long en) { /* * get_paca()->soft_enabled = en; @@ -143,7 +143,6 @@ void local_irq_restore(unsigned long en) */ if (local_paca->lppaca_ptr->int_dword.any_int) iseries_handle_interrupts(); - return; } /* @@ -175,6 +174,7 @@ void local_irq_restore(unsigned long en) __hard_irq_enable(); } +EXPORT_SYMBOL(raw_local_irq_restore); #endif /* CONFIG_PPC64 */ int show_interrupts(struct seq_file *p, void *v) @@ -311,8 +311,21 @@ void do_IRQ(struct pt_regs *regs) handler = &__do_IRQ; irqtp->task = curtp->task; irqtp->flags = 0; + + /* Copy the softirq bits in preempt_count so that the + * softirq checks work in the hardirq context. + */ + irqtp->preempt_count = + (irqtp->preempt_count & ~SOFTIRQ_MASK) | + (curtp->preempt_count & SOFTIRQ_MASK); + call_handle_irq(irq, desc, irqtp, handler); irqtp->task = NULL; + + + /* Set any flag that may have been set on the + * alternate stack + */ if (irqtp->flags) set_bits(irqtp->flags, &curtp->flags); } else @@ -358,7 +371,7 @@ void irq_ctx_init(void) memset((void *)softirq_ctx[i], 0, THREAD_SIZE); tp = softirq_ctx[i]; tp->cpu = i; - tp->preempt_count = SOFTIRQ_OFFSET; + tp->preempt_count = 0; memset((void *)hardirq_ctx[i], 0, THREAD_SIZE); tp = hardirq_ctx[i]; diff --git a/arch/powerpc/kernel/isa-bridge.c b/arch/powerpc/kernel/isa-bridge.c index ee172aa42aa7..289af348978d 100644 --- a/arch/powerpc/kernel/isa-bridge.c +++ b/arch/powerpc/kernel/isa-bridge.c @@ -80,13 +80,13 @@ static void __devinit pci_process_ISA_OF_ranges(struct device_node *isa_node, * (size depending on dev->n_addr_cells) * cell 5: the size of the range */ - if ((range->isa_addr.a_hi && ISA_SPACE_MASK) != ISA_SPACE_IO) { + if ((range->isa_addr.a_hi & ISA_SPACE_MASK) != ISA_SPACE_IO) { range++; rlen -= sizeof(struct isa_range); if (rlen < sizeof(struct isa_range)) goto inval_range; } - if ((range->isa_addr.a_hi && ISA_SPACE_MASK) != ISA_SPACE_IO) + if ((range->isa_addr.a_hi & ISA_SPACE_MASK) != ISA_SPACE_IO) goto inval_range; isa_addr = range->isa_addr.a_lo; @@ -99,7 +99,7 @@ static void __devinit pci_process_ISA_OF_ranges(struct device_node *isa_node, */ if ((pci_addr != 0) || (isa_addr != 0)) { printk(KERN_ERR "unexpected isa to pci mapping: %s\n", - __FUNCTION__); + __func__); return; } diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index dcb89a88df46..1ffacc698ffb 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -226,7 +226,7 @@ static void parse_system_parameter_string(struct seq_file *m) unsigned char *local_buffer = kmalloc(SPLPAR_MAXLENGTH, GFP_KERNEL); if (!local_buffer) { printk(KERN_ERR "%s %s kmalloc failure at line %d \n", - __FILE__, __FUNCTION__, __LINE__); + __FILE__, __func__, __LINE__); return; } @@ -243,14 +243,14 @@ static void parse_system_parameter_string(struct seq_file *m) if (call_status != 0) { printk(KERN_INFO "%s %s Error calling get-system-parameter (0x%x)\n", - __FILE__, __FUNCTION__, call_status); + __FILE__, __func__, call_status); } else { int splpar_strlen; int idx, w_idx; char *workbuffer = kzalloc(SPLPAR_MAXLENGTH, GFP_KERNEL); if (!workbuffer) { printk(KERN_ERR "%s %s kmalloc failure at line %d \n", - __FILE__, __FUNCTION__, __LINE__); + __FILE__, __func__, __LINE__); kfree(local_buffer); return; } @@ -484,10 +484,10 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf, current_weight = (resource >> 5 * 8) & 0xFF; pr_debug("%s: current_entitled = %lu, current_weight = %u\n", - __FUNCTION__, current_entitled, current_weight); + __func__, current_entitled, current_weight); pr_debug("%s: new_entitled = %lu, new_weight = %u\n", - __FUNCTION__, *new_entitled_ptr, *new_weight_ptr); + __func__, *new_entitled_ptr, *new_weight_ptr); retval = plpar_hcall_norets(H_SET_PPP, *new_entitled_ptr, *new_weight_ptr); @@ -502,7 +502,7 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf, retval = -EINVAL; } else { printk(KERN_WARNING "%s: received unknown hv return code %ld", - __FUNCTION__, retval); + __func__, retval); retval = -EIO; } diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c index c0c8e8c3ced9..2d202f274e73 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec.c @@ -12,8 +12,9 @@ #include <linux/kexec.h> #include <linux/reboot.h> #include <linux/threads.h> +#include <linux/lmb.h> #include <asm/machdep.h> -#include <asm/lmb.h> +#include <asm/prom.h> void machine_crash_shutdown(struct pt_regs *regs) { diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index 5c2e253ddfb1..92ccc6fcc5b0 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -152,7 +152,7 @@ _GLOBAL(low_choose_750fx_pll) mtspr SPRN_HID1,r4 /* Store new HID1 image */ - rlwinm r6,r1,0,0,18 + rlwinm r6,r1,0,0,(31-THREAD_SHIFT) lwz r6,TI_CPU(r6) slwi r6,r6,2 addis r6,r6,nap_save_hid1@ha @@ -281,7 +281,7 @@ _GLOBAL(_tlbia) #endif /* CONFIG_SMP */ #else /* !(CONFIG_40x || CONFIG_44x || CONFIG_FSL_BOOKE) */ #if defined(CONFIG_SMP) - rlwinm r8,r1,0,0,18 + rlwinm r8,r1,0,0,(31-THREAD_SHIFT) lwz r8,TI_CPU(r8) oris r8,r8,10 mfmsr r10 @@ -377,7 +377,7 @@ _GLOBAL(_tlbie) #endif /* CONFIG_SMP */ #else /* !(CONFIG_40x || CONFIG_44x || CONFIG_FSL_BOOKE) */ #if defined(CONFIG_SMP) - rlwinm r8,r1,0,0,18 + rlwinm r8,r1,0,0,(31-THREAD_SHIFT) lwz r8,TI_CPU(r8) oris r8,r8,11 mfmsr r10 @@ -785,6 +785,21 @@ _GLOBAL(__lshrdi3) or r4,r4,r7 # LSW |= t2 blr +/* + * 64-bit comparison: __ucmpdi2(u64 a, u64 b) + * Returns 0 if a < b, 1 if a == b, 2 if a > b. + */ +_GLOBAL(__ucmpdi2) + cmplw r3,r5 + li r3,1 + bne 1f + cmplw r4,r6 + beqlr +1: li r3,0 + bltlr + li r3,2 + blr + _GLOBAL(abs) srawi r4,r3,31 xor r3,r3,r4 diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index a3c491e88a72..942951e76586 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -27,23 +27,11 @@ .text -_GLOBAL(get_msr) - mfmsr r3 - blr - -_GLOBAL(get_srr0) - mfsrr0 r3 - blr - -_GLOBAL(get_srr1) - mfsrr1 r3 - blr - #ifdef CONFIG_IRQSTACKS _GLOBAL(call_do_softirq) mflr r0 std r0,16(r1) - stdu r1,THREAD_SIZE-112(r3) + stdu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r3) mr r1,r3 bl .__do_softirq ld r1,0(r1) @@ -56,7 +44,7 @@ _GLOBAL(call_handle_irq) mflr r0 std r0,16(r1) mtctr r8 - stdu r1,THREAD_SIZE-112(r5) + stdu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r5) mr r1,r5 bctrl ld r1,0(r1) @@ -599,7 +587,7 @@ _GLOBAL(kexec_sequence) std r0,16(r1) /* switch stacks to newstack -- &kexec_stack.stack */ - stdu r1,THREAD_SIZE-112(r3) + stdu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r3) mr r1,r3 li r0,0 @@ -616,7 +604,7 @@ _GLOBAL(kexec_sequence) std r26,-48(r1) std r25,-56(r1) - stdu r1,-112-64(r1) + stdu r1,-STACK_FRAME_OVERHEAD-64(r1) /* save args into preserved regs */ mr r31,r3 /* newstack (both) */ diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c index fb698d47082d..e79ad8afda07 100644 --- a/arch/powerpc/kernel/of_platform.c +++ b/arch/powerpc/kernel/of_platform.c @@ -275,6 +275,8 @@ static int __devinit of_pci_phb_probe(struct of_device *dev, /* Scan the bus */ scan_phb(phb); + if (phb->bus == NULL) + return -ENXIO; /* Claim resources. This might need some rework as well depending * wether we are doing probe-only or not, like assigning unassigned diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c index 55f1a25085cd..c9bf17eec31b 100644 --- a/arch/powerpc/kernel/paca.c +++ b/arch/powerpc/kernel/paca.c @@ -7,31 +7,24 @@ * 2 of the License, or (at your option) any later version. */ -#include <linux/types.h> #include <linux/threads.h> #include <linux/module.h> -#include <asm/processor.h> -#include <asm/ptrace.h> -#include <asm/page.h> #include <asm/lppaca.h> -#include <asm/iseries/it_lp_reg_save.h> #include <asm/paca.h> -#include <asm/mmu.h> - /* This symbol is provided by the linker - let it fill in the paca * field correctly */ extern unsigned long __toc_start; /* - * iSeries structure which the hypervisor knows about - this structure + * The structure which the hypervisor knows about - this structure * should not cross a page boundary. The vpa_init/register_vpa call * is now known to fail if the lppaca structure crosses a page - * boundary. The lppaca is also used on POWER5 pSeries boxes. The - * lppaca is 640 bytes long, and cannot readily change since the - * hypervisor knows its layout, so a 1kB alignment will suffice to - * ensure that it doesn't cross a page boundary. + * boundary. The lppaca is also used on legacy iSeries and POWER5 + * pSeries boxes. The lppaca is 640 bytes long, and cannot readily + * change since the hypervisor knows its layout, so a 1kB alignment + * will suffice to ensure that it doesn't cross a page boundary. */ struct lppaca lppaca[] = { [0 ... (NR_CPUS-1)] = { @@ -66,75 +59,29 @@ struct slb_shadow slb_shadow[] __cacheline_aligned = { * processors. The processor VPD array needs one entry per physical * processor (not thread). */ -#define PACA_INIT_COMMON(number) \ - .lppaca_ptr = &lppaca[number], \ - .lock_token = 0x8000, \ - .paca_index = (number), /* Paca Index */ \ - .kernel_toc = (unsigned long)(&__toc_start) + 0x8000UL, \ - .hw_cpu_id = 0xffff, \ - .slb_shadow_ptr = &slb_shadow[number], +struct paca_struct paca[NR_CPUS]; +EXPORT_SYMBOL(paca); -#ifdef CONFIG_PPC_ISERIES -#define PACA_INIT_ISERIES(number) \ - .reg_save_ptr = &iseries_reg_save[number], +void __init initialise_pacas(void) +{ + int cpu; -#define PACA_INIT(number) \ -{ \ - PACA_INIT_COMMON(number) \ - PACA_INIT_ISERIES(number) \ -} + /* The TOC register (GPR2) points 32kB into the TOC, so that 64kB + * of the TOC can be addressed using a single machine instruction. + */ + unsigned long kernel_toc = (unsigned long)(&__toc_start) + 0x8000UL; -#else -#define PACA_INIT(number) \ -{ \ - PACA_INIT_COMMON(number) \ -} + /* Can't use for_each_*_cpu, as they aren't functional yet */ + for (cpu = 0; cpu < NR_CPUS; cpu++) { + struct paca_struct *new_paca = &paca[cpu]; -#endif + new_paca->lppaca_ptr = &lppaca[cpu]; + new_paca->lock_token = 0x8000; + new_paca->paca_index = cpu; + new_paca->kernel_toc = kernel_toc; + new_paca->hw_cpu_id = 0xffff; + new_paca->slb_shadow_ptr = &slb_shadow[cpu]; + new_paca->__current = &init_task; -struct paca_struct paca[] = { - PACA_INIT(0), -#if NR_CPUS > 1 - PACA_INIT( 1), PACA_INIT( 2), PACA_INIT( 3), -#if NR_CPUS > 4 - PACA_INIT( 4), PACA_INIT( 5), PACA_INIT( 6), PACA_INIT( 7), -#if NR_CPUS > 8 - PACA_INIT( 8), PACA_INIT( 9), PACA_INIT( 10), PACA_INIT( 11), - PACA_INIT( 12), PACA_INIT( 13), PACA_INIT( 14), PACA_INIT( 15), - PACA_INIT( 16), PACA_INIT( 17), PACA_INIT( 18), PACA_INIT( 19), - PACA_INIT( 20), PACA_INIT( 21), PACA_INIT( 22), PACA_INIT( 23), - PACA_INIT( 24), PACA_INIT( 25), PACA_INIT( 26), PACA_INIT( 27), - PACA_INIT( 28), PACA_INIT( 29), PACA_INIT( 30), PACA_INIT( 31), -#if NR_CPUS > 32 - PACA_INIT( 32), PACA_INIT( 33), PACA_INIT( 34), PACA_INIT( 35), - PACA_INIT( 36), PACA_INIT( 37), PACA_INIT( 38), PACA_INIT( 39), - PACA_INIT( 40), PACA_INIT( 41), PACA_INIT( 42), PACA_INIT( 43), - PACA_INIT( 44), PACA_INIT( 45), PACA_INIT( 46), PACA_INIT( 47), - PACA_INIT( 48), PACA_INIT( 49), PACA_INIT( 50), PACA_INIT( 51), - PACA_INIT( 52), PACA_INIT( 53), PACA_INIT( 54), PACA_INIT( 55), - PACA_INIT( 56), PACA_INIT( 57), PACA_INIT( 58), PACA_INIT( 59), - PACA_INIT( 60), PACA_INIT( 61), PACA_INIT( 62), PACA_INIT( 63), -#if NR_CPUS > 64 - PACA_INIT( 64), PACA_INIT( 65), PACA_INIT( 66), PACA_INIT( 67), - PACA_INIT( 68), PACA_INIT( 69), PACA_INIT( 70), PACA_INIT( 71), - PACA_INIT( 72), PACA_INIT( 73), PACA_INIT( 74), PACA_INIT( 75), - PACA_INIT( 76), PACA_INIT( 77), PACA_INIT( 78), PACA_INIT( 79), - PACA_INIT( 80), PACA_INIT( 81), PACA_INIT( 82), PACA_INIT( 83), - PACA_INIT( 84), PACA_INIT( 85), PACA_INIT( 86), PACA_INIT( 87), - PACA_INIT( 88), PACA_INIT( 89), PACA_INIT( 90), PACA_INIT( 91), - PACA_INIT( 92), PACA_INIT( 93), PACA_INIT( 94), PACA_INIT( 95), - PACA_INIT( 96), PACA_INIT( 97), PACA_INIT( 98), PACA_INIT( 99), - PACA_INIT(100), PACA_INIT(101), PACA_INIT(102), PACA_INIT(103), - PACA_INIT(104), PACA_INIT(105), PACA_INIT(106), PACA_INIT(107), - PACA_INIT(108), PACA_INIT(109), PACA_INIT(110), PACA_INIT(111), - PACA_INIT(112), PACA_INIT(113), PACA_INIT(114), PACA_INIT(115), - PACA_INIT(116), PACA_INIT(117), PACA_INIT(118), PACA_INIT(119), - PACA_INIT(120), PACA_INIT(121), PACA_INIT(122), PACA_INIT(123), - PACA_INIT(124), PACA_INIT(125), PACA_INIT(126), PACA_INIT(127), -#endif -#endif -#endif -#endif -#endif -}; -EXPORT_SYMBOL(paca); + } +} diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 980fe32895c0..063cdd413049 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -748,7 +748,13 @@ static void __devinit pcibios_fixup_resources(struct pci_dev *dev) struct resource *res = dev->resource + i; if (!res->flags) continue; - if (res->end == 0xffffffff) { + /* On platforms that have PPC_PCI_PROBE_ONLY set, we don't + * consider 0 as an unassigned BAR value. It's technically + * a valid value, but linux doesn't like it... so when we can + * re-assign things, we do so, but if we can't, we keep it + * around and hope for the best... + */ + if (res->start == 0 && !(ppc_pci_flags & PPC_PCI_PROBE_ONLY)) { pr_debug("PCI:%s Resource %d %016llx-%016llx [%x] is unassigned\n", pci_name(dev), i, (unsigned long long)res->start, @@ -1155,41 +1161,9 @@ EXPORT_SYMBOL_GPL(pcibios_claim_one_bus); int pcibios_enable_device(struct pci_dev *dev, int mask) { - u16 cmd, old_cmd; - int idx; - struct resource *r; - if (ppc_md.pcibios_enable_device_hook) if (ppc_md.pcibios_enable_device_hook(dev)) return -EINVAL; - pci_read_config_word(dev, PCI_COMMAND, &cmd); - old_cmd = cmd; - for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) { - /* Only set up the requested stuff */ - if (!(mask & (1 << idx))) - continue; - r = &dev->resource[idx]; - if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM))) - continue; - if ((idx == PCI_ROM_RESOURCE) && - (!(r->flags & IORESOURCE_ROM_ENABLE))) - continue; - if (r->parent == NULL) { - printk(KERN_ERR "PCI: Device %s not available because" - " of resource collisions\n", pci_name(dev)); - return -EINVAL; - } - if (r->flags & IORESOURCE_IO) - cmd |= PCI_COMMAND_IO; - if (r->flags & IORESOURCE_MEM) - cmd |= PCI_COMMAND_MEMORY; - } - if (cmd != old_cmd) { - printk("PCI: Enabling device %s (%04x -> %04x)\n", - pci_name(dev), old_cmd, cmd); - pci_write_config_word(dev, PCI_COMMAND, cmd); - } - return 0; + return pci_enable_resources(dev, mask); } - diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index aa9ff35b0e63..09fcb50c45ae 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -15,7 +15,6 @@ #include <linux/bitops.h> #include <asm/page.h> -#include <asm/semaphore.h> #include <asm/processor.h> #include <asm/cacheflush.h> #include <asm/uaccess.h> @@ -45,10 +44,6 @@ #include <asm/signal.h> #include <asm/dcr.h> -#ifdef CONFIG_PPC64 -EXPORT_SYMBOL(local_irq_restore); -#endif - #ifdef CONFIG_PPC32 extern void transfer_to_handler(void); extern void do_IRQ(struct pt_regs *regs); @@ -78,6 +73,7 @@ EXPORT_SYMBOL(strncpy); EXPORT_SYMBOL(strcat); EXPORT_SYMBOL(strlen); EXPORT_SYMBOL(strcmp); +EXPORT_SYMBOL(strncmp); EXPORT_SYMBOL(csum_partial); EXPORT_SYMBOL(csum_partial_copy_generic); @@ -149,6 +145,8 @@ long long __lshrdi3(long long, int); EXPORT_SYMBOL(__ashrdi3); EXPORT_SYMBOL(__ashldi3); EXPORT_SYMBOL(__lshrdi3); +int __ucmpdi2(unsigned long long, unsigned long long); +EXPORT_SYMBOL(__ucmpdi2); #endif EXPORT_SYMBOL(memcpy); @@ -189,3 +187,4 @@ EXPORT_SYMBOL(intercept_table); EXPORT_SYMBOL(__mtdcr); EXPORT_SYMBOL(__mfdcr); #endif +EXPORT_SYMBOL(empty_zero_page); diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 4846bf543a8c..6caad17ea72e 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -241,8 +241,12 @@ void discard_lazy_cpu_state(void) } #endif /* CONFIG_SMP */ +static DEFINE_PER_CPU(unsigned long, current_dabr); + int set_dabr(unsigned long dabr) { + __get_cpu_var(current_dabr) = dabr; + #ifdef CONFIG_PPC_MERGE /* XXX for now */ if (ppc_md.set_dabr) return ppc_md.set_dabr(dabr); @@ -259,8 +263,6 @@ int set_dabr(unsigned long dabr) DEFINE_PER_CPU(struct cpu_usage, cpu_usage_array); #endif -static DEFINE_PER_CPU(unsigned long, current_dabr); - struct task_struct *__switch_to(struct task_struct *prev, struct task_struct *new) { @@ -325,10 +327,8 @@ struct task_struct *__switch_to(struct task_struct *prev, #endif /* CONFIG_SMP */ - if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr)) { + if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr)) set_dabr(new->thread.dabr); - __get_cpu_var(current_dabr) = new->thread.dabr; - } new_thread = &new->thread; old_thread = ¤t->thread; @@ -353,6 +353,12 @@ struct task_struct *__switch_to(struct task_struct *prev, account_process_vtime(current); calculate_steal_time(); + /* + * We can't take a PMU exception inside _switch() since there is a + * window where the kernel stack SLB and the kernel stack are out + * of sync. Hard disable here. + */ + hard_irq_disable(); last = _switch(old_thread, new_thread); local_irq_restore(flags); @@ -862,11 +868,6 @@ int sys_execve(unsigned long a0, unsigned long a1, unsigned long a2, flush_spe_to_thread(current); error = do_execve(filename, (char __user * __user *) a1, (char __user * __user *) a2, regs); - if (error == 0) { - task_lock(current); - current->ptrace &= ~PT_DTRACE; - task_unlock(current); - } putname(filename); out: return error; @@ -913,20 +914,6 @@ int validate_sp(unsigned long sp, struct task_struct *p, return valid_irq_stack(sp, p, nbytes); } -#ifdef CONFIG_PPC64 -#define MIN_STACK_FRAME 112 /* same as STACK_FRAME_OVERHEAD, in fact */ -#define FRAME_LR_SAVE 2 -#define INT_FRAME_SIZE (sizeof(struct pt_regs) + STACK_FRAME_OVERHEAD + 288) -#define REGS_MARKER 0x7265677368657265ul -#define FRAME_MARKER 12 -#else -#define MIN_STACK_FRAME 16 -#define FRAME_LR_SAVE 1 -#define INT_FRAME_SIZE (sizeof(struct pt_regs) + STACK_FRAME_OVERHEAD) -#define REGS_MARKER 0x72656773ul -#define FRAME_MARKER 2 -#endif - EXPORT_SYMBOL(validate_sp); unsigned long get_wchan(struct task_struct *p) @@ -938,15 +925,15 @@ unsigned long get_wchan(struct task_struct *p) return 0; sp = p->thread.ksp; - if (!validate_sp(sp, p, MIN_STACK_FRAME)) + if (!validate_sp(sp, p, STACK_FRAME_OVERHEAD)) return 0; do { sp = *(unsigned long *)sp; - if (!validate_sp(sp, p, MIN_STACK_FRAME)) + if (!validate_sp(sp, p, STACK_FRAME_OVERHEAD)) return 0; if (count > 0) { - ip = ((unsigned long *)sp)[FRAME_LR_SAVE]; + ip = ((unsigned long *)sp)[STACK_FRAME_LR_SAVE]; if (!in_sched_functions(ip)) return ip; } @@ -975,12 +962,12 @@ void show_stack(struct task_struct *tsk, unsigned long *stack) lr = 0; printk("Call Trace:\n"); do { - if (!validate_sp(sp, tsk, MIN_STACK_FRAME)) + if (!validate_sp(sp, tsk, STACK_FRAME_OVERHEAD)) return; stack = (unsigned long *) sp; newsp = stack[0]; - ip = stack[FRAME_LR_SAVE]; + ip = stack[STACK_FRAME_LR_SAVE]; if (!firstframe || ip != lr) { printk("["REG"] ["REG"] ", sp, ip); print_symbol("%s", ip); @@ -994,8 +981,8 @@ void show_stack(struct task_struct *tsk, unsigned long *stack) * See if this is an exception frame. * We look for the "regshere" marker in the current frame. */ - if (validate_sp(sp, tsk, INT_FRAME_SIZE) - && stack[FRAME_MARKER] == REGS_MARKER) { + if (validate_sp(sp, tsk, STACK_INT_FRAME_SIZE) + && stack[STACK_FRAME_MARKER] == STACK_FRAME_REGS_MARKER) { struct pt_regs *regs = (struct pt_regs *) (sp + STACK_FRAME_OVERHEAD); printk("--- Exception: %lx", regs->trap); @@ -1046,3 +1033,34 @@ void ppc64_runlatch_off(void) } } #endif + +#if THREAD_SHIFT < PAGE_SHIFT + +static struct kmem_cache *thread_info_cache; + +struct thread_info *alloc_thread_info(struct task_struct *tsk) +{ + struct thread_info *ti; + + ti = kmem_cache_alloc(thread_info_cache, GFP_KERNEL); + if (unlikely(ti == NULL)) + return NULL; +#ifdef CONFIG_DEBUG_STACK_USAGE + memset(ti, 0, THREAD_SIZE); +#endif + return ti; +} + +void free_thread_info(struct thread_info *ti) +{ + kmem_cache_free(thread_info_cache, ti); +} + +void thread_info_cache_init(void) +{ + thread_info_cache = kmem_cache_create("thread_info", THREAD_SIZE, + THREAD_SIZE, 0, NULL); + BUG_ON(thread_info_cache == NULL); +} + +#endif /* THREAD_SHIFT < PAGE_SHIFT */ diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index eac97f48b9b8..2aefe2a4129a 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -31,10 +31,10 @@ #include <linux/kexec.h> #include <linux/debugfs.h> #include <linux/irq.h> +#include <linux/lmb.h> #include <asm/prom.h> #include <asm/rtas.h> -#include <asm/lmb.h> #include <asm/page.h> #include <asm/processor.h> #include <asm/irq.h> @@ -51,7 +51,9 @@ #include <asm/machdep.h> #include <asm/pSeries_reconfig.h> #include <asm/pci-bridge.h> +#include <asm/phyp_dump.h> #include <asm/kexec.h> +#include <mm/mmu_decl.h> #ifdef DEBUG #define DBG(fmt...) printk(KERN_ERR fmt) @@ -436,7 +438,7 @@ early_param("mem", early_parse_mem); * The device tree may be allocated beyond our memory limit, or inside the * crash kernel region for kdump. If so, move it out of the way. */ -static void move_device_tree(void) +static void __init move_device_tree(void) { unsigned long start, size; void *p; @@ -977,7 +979,10 @@ static int __init early_init_dt_scan_memory(unsigned long node, } #endif lmb_add(base, size); + + memstart_addr = min((u64)memstart_addr, base); } + return 0; } @@ -1040,6 +1045,87 @@ static void __init early_reserve_mem(void) #endif } +#ifdef CONFIG_PHYP_DUMP +/** + * phyp_dump_calculate_reserve_size() - reserve variable boot area 5% or arg + * + * Function to find the largest size we need to reserve + * during early boot process. + * + * It either looks for boot param and returns that OR + * returns larger of 256 or 5% rounded down to multiples of 256MB. + * + */ +static inline unsigned long phyp_dump_calculate_reserve_size(void) +{ + unsigned long tmp; + + if (phyp_dump_info->reserve_bootvar) + return phyp_dump_info->reserve_bootvar; + + /* divide by 20 to get 5% of value */ + tmp = lmb_end_of_DRAM(); + do_div(tmp, 20); + + /* round it down in multiples of 256 */ + tmp = tmp & ~0x0FFFFFFFUL; + + return (tmp > PHYP_DUMP_RMR_END ? tmp : PHYP_DUMP_RMR_END); +} + +/** + * phyp_dump_reserve_mem() - reserve all not-yet-dumped mmemory + * + * This routine may reserve memory regions in the kernel only + * if the system is supported and a dump was taken in last + * boot instance or if the hardware is supported and the + * scratch area needs to be setup. In other instances it returns + * without reserving anything. The memory in case of dump being + * active is freed when the dump is collected (by userland tools). + */ +static void __init phyp_dump_reserve_mem(void) +{ + unsigned long base, size; + unsigned long variable_reserve_size; + + if (!phyp_dump_info->phyp_dump_configured) { + printk(KERN_ERR "Phyp-dump not supported on this hardware\n"); + return; + } + + if (!phyp_dump_info->phyp_dump_at_boot) { + printk(KERN_INFO "Phyp-dump disabled at boot time\n"); + return; + } + + variable_reserve_size = phyp_dump_calculate_reserve_size(); + + if (phyp_dump_info->phyp_dump_is_active) { + /* Reserve *everything* above RMR.Area freed by userland tools*/ + base = variable_reserve_size; + size = lmb_end_of_DRAM() - base; + + /* XXX crashed_ram_end is wrong, since it may be beyond + * the memory_limit, it will need to be adjusted. */ + lmb_reserve(base, size); + + phyp_dump_info->init_reserve_start = base; + phyp_dump_info->init_reserve_size = size; + } else { + size = phyp_dump_info->cpu_state_size + + phyp_dump_info->hpte_region_size + + variable_reserve_size; + base = lmb_end_of_DRAM() - size; + lmb_reserve(base, size); + phyp_dump_info->init_reserve_start = base; + phyp_dump_info->init_reserve_size = size; + } +} +#else +static inline void __init phyp_dump_reserve_mem(void) {} +#endif /* CONFIG_PHYP_DUMP && CONFIG_PPC_RTAS */ + + void __init early_init_devtree(void *params) { DBG(" -> early_init_devtree(%p)\n", params); @@ -1052,6 +1138,11 @@ void __init early_init_devtree(void *params) of_scan_flat_dt(early_init_dt_scan_rtas, NULL); #endif +#ifdef CONFIG_PHYP_DUMP + /* scan tree to see if dump occured during last boot */ + of_scan_flat_dt(early_init_dt_scan_phyp_dump, NULL); +#endif + /* Retrieve various informations from the /chosen node of the * device-tree, including the platform type, initrd location and * size, TCE reserve, and more ... @@ -1072,6 +1163,7 @@ void __init early_init_devtree(void *params) reserve_kdump_trampoline(); reserve_crashkernel(); early_reserve_mem(); + phyp_dump_reserve_mem(); lmb_enforce_memory_limit(memory_limit); lmb_analyze(); @@ -1244,12 +1336,14 @@ EXPORT_SYMBOL(of_node_put); */ void of_attach_node(struct device_node *np) { - write_lock(&devtree_lock); + unsigned long flags; + + write_lock_irqsave(&devtree_lock, flags); np->sibling = np->parent->child; np->allnext = allnodes; np->parent->child = np; allnodes = np; - write_unlock(&devtree_lock); + write_unlock_irqrestore(&devtree_lock, flags); } /* @@ -1260,8 +1354,9 @@ void of_attach_node(struct device_node *np) void of_detach_node(struct device_node *np) { struct device_node *parent; + unsigned long flags; - write_lock(&devtree_lock); + write_lock_irqsave(&devtree_lock, flags); parent = np->parent; if (!parent) @@ -1292,7 +1387,7 @@ void of_detach_node(struct device_node *np) of_node_set_flag(np, OF_DETACHED); out_unlock: - write_unlock(&devtree_lock); + write_unlock_irqrestore(&devtree_lock, flags); } #ifdef CONFIG_PPC_PSERIES @@ -1373,20 +1468,21 @@ __initcall(prom_reconfig_setup); int prom_add_property(struct device_node* np, struct property* prop) { struct property **next; + unsigned long flags; prop->next = NULL; - write_lock(&devtree_lock); + write_lock_irqsave(&devtree_lock, flags); next = &np->properties; while (*next) { if (strcmp(prop->name, (*next)->name) == 0) { /* duplicate ! don't insert it */ - write_unlock(&devtree_lock); + write_unlock_irqrestore(&devtree_lock, flags); return -1; } next = &(*next)->next; } *next = prop; - write_unlock(&devtree_lock); + write_unlock_irqrestore(&devtree_lock, flags); #ifdef CONFIG_PROC_DEVICETREE /* try to add to proc as well if it was initialized */ @@ -1406,9 +1502,10 @@ int prom_add_property(struct device_node* np, struct property* prop) int prom_remove_property(struct device_node *np, struct property *prop) { struct property **next; + unsigned long flags; int found = 0; - write_lock(&devtree_lock); + write_lock_irqsave(&devtree_lock, flags); next = &np->properties; while (*next) { if (*next == prop) { @@ -1421,7 +1518,7 @@ int prom_remove_property(struct device_node *np, struct property *prop) } next = &(*next)->next; } - write_unlock(&devtree_lock); + write_unlock_irqrestore(&devtree_lock, flags); if (!found) return -ENODEV; @@ -1447,9 +1544,10 @@ int prom_update_property(struct device_node *np, struct property *oldprop) { struct property **next; + unsigned long flags; int found = 0; - write_lock(&devtree_lock); + write_lock_irqsave(&devtree_lock, flags); next = &np->properties; while (*next) { if (*next == oldprop) { @@ -1463,7 +1561,7 @@ int prom_update_property(struct device_node *np, } next = &(*next)->next; } - write_unlock(&devtree_lock); + write_unlock_irqrestore(&devtree_lock, flags); if (!found) return -ENODEV; diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 5ab4c8466cc9..6d6df1e60325 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -2240,6 +2240,14 @@ static void __init fixup_device_tree_efika(void) if (rv != PROM_ERROR && (strcmp(prop, "chrp") == 0)) prom_setprop(node, "/", "device_type", "efika", sizeof("efika")); + /* CODEGEN,description is exposed in /proc/cpuinfo so + fix that too */ + rv = prom_getprop(node, "CODEGEN,description", prop, sizeof(prop)); + if (rv != PROM_ERROR && (strstr(prop, "CHRP"))) + prom_setprop(node, "/", "CODEGEN,description", + "Efika 5200B PowerPC System", + sizeof("Efika 5200B PowerPC System")); + /* Fixup bestcomm interrupts property */ node = call_prom("finddevice", 1, 1, ADDR("/builtin/bestcomm")); if (PHANDLE_VALID(node)) { diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh new file mode 100644 index 000000000000..8e24fc1821e8 --- /dev/null +++ b/arch/powerpc/kernel/prom_init_check.sh @@ -0,0 +1,58 @@ +#!/bin/sh +# +# Copyright © 2008 IBM Corporation +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation; either version +# 2 of the License, or (at your option) any later version. + +# This script checks prom_init.o to see what external symbols it +# is using, if it finds symbols not in the whitelist it returns +# an error. The point of this is to discourage people from +# intentionally or accidentally adding new code to prom_init.c +# which has side effects on other parts of the kernel. + +# If you really need to reference something from prom_init.o add +# it to the list below: + +WHITELIST="add_reloc_offset __bss_start __bss_stop copy_and_flush +_end enter_prom memcpy memset reloc_offset __secondary_hold +__secondary_hold_acknowledge __secondary_hold_spinloop __start +strcmp strcpy strlcpy strlen strncmp strstr logo_linux_clut224 +reloc_got2" + +NM="$1" +OBJ="$2" + +ERROR=0 + +for UNDEF in $($NM -u $OBJ | awk '{print $2}') +do + # On 64-bit nm gives us the function descriptors, which have + # a leading . on the name, so strip it off here. + UNDEF="${UNDEF#.}" + + if [ $KBUILD_VERBOSE ]; then + if [ $KBUILD_VERBOSE -ne 0 ]; then + echo "Checking prom_init.o symbol '$UNDEF'" + fi + fi + + OK=0 + for WHITE in $WHITELIST + do + if [ "$UNDEF" = "$WHITE" ]; then + OK=1 + break + fi + done + + if [ $OK -eq 0 ]; then + ERROR=1 + echo "Error: External symbol '$UNDEF' referenced" \ + "from prom_init.c" >&2 + fi +done + +exit $ERROR diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 7673e9865733..2a9fe97e4521 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -530,15 +530,21 @@ static int gpr32_set(struct task_struct *target, --count; } - if (kbuf) + if (kbuf) { for (; count > 0 && pos <= PT_MAX_PUT_REG; --count) regs[pos++] = *k++; - else + for (; count > 0 && pos < PT_TRAP; --count, ++pos) + ++k; + } else { for (; count > 0 && pos <= PT_MAX_PUT_REG; --count) { if (__get_user(reg, u++)) return -EFAULT; regs[pos++] = reg; } + for (; count > 0 && pos < PT_TRAP; --count, ++pos) + if (__get_user(reg, u++)) + return -EFAULT; + } if (count > 0 && pos == PT_TRAP) { if (kbuf) diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 52e95c2158c0..34843c318419 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -22,11 +22,11 @@ #include <linux/smp.h> #include <linux/completion.h> #include <linux/cpumask.h> +#include <linux/lmb.h> #include <asm/prom.h> #include <asm/rtas.h> #include <asm/hvcall.h> -#include <asm/semaphore.h> #include <asm/machdep.h> #include <asm/firmware.h> #include <asm/page.h> @@ -34,7 +34,6 @@ #include <asm/system.h> #include <asm/delay.h> #include <asm/uaccess.h> -#include <asm/lmb.h> #include <asm/udbg.h> #include <asm/syscalls.h> #include <asm/smp.h> @@ -507,7 +506,7 @@ int rtas_error_rc(int rtas_rc) break; default: printk(KERN_ERR "%s: unexpected RTAS error %d\n", - __FUNCTION__, rtas_rc); + __func__, rtas_rc); rc = -ERANGE; break; } diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c index f2276593f416..627f126d1848 100644 --- a/arch/powerpc/kernel/rtas_flash.c +++ b/arch/powerpc/kernel/rtas_flash.c @@ -356,7 +356,7 @@ static int rtas_excl_open(struct inode *inode, struct file *file) /* Enforce exclusive open with use count of PDE */ spin_lock(&flash_file_open_lock); - if (atomic_read(&dp->count) > 1) { + if (atomic_read(&dp->count) > 2) { spin_unlock(&flash_file_open_lock); return -EBUSY; } @@ -807,7 +807,7 @@ int __init rtas_flash_init(void) rtas_block_ctor); if (!flash_block_cache) { printk(KERN_ERR "%s: failed to create block cache\n", - __FUNCTION__); + __func__); rc = -ENOMEM; goto cleanup; } diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c index 433a0a0949fb..3ab88a9dc70d 100644 --- a/arch/powerpc/kernel/rtas_pci.c +++ b/arch/powerpc/kernel/rtas_pci.c @@ -56,21 +56,6 @@ static inline int config_access_valid(struct pci_dn *dn, int where) return 0; } -static int of_device_available(struct device_node * dn) -{ - const char *status; - - status = of_get_property(dn, "status", NULL); - - if (!status) - return 1; - - if (!strcmp(status, "okay")) - return 1; - - return 0; -} - int rtas_read_config(struct pci_dn *pdn, int where, int size, u32 *val) { int returnval = -1; @@ -117,7 +102,7 @@ static int rtas_pci_read_config(struct pci_bus *bus, for (dn = busdn->child; dn; dn = dn->sibling) { struct pci_dn *pdn = PCI_DN(dn); if (pdn && pdn->devfn == devfn - && of_device_available(dn)) + && of_device_is_available(dn)) return rtas_read_config(pdn, where, size, val); } @@ -164,7 +149,7 @@ static int rtas_pci_write_config(struct pci_bus *bus, for (dn = busdn->child; dn; dn = dn->sibling) { struct pci_dn *pdn = PCI_DN(dn); if (pdn && pdn->devfn == devfn - && of_device_available(dn)) + && of_device_is_available(dn)) return rtas_write_config(pdn, where, size, val); } return PCIBIOS_DEVICE_NOT_FOUND; @@ -326,7 +311,7 @@ int pcibios_remove_root_bus(struct pci_controller *phb) res = b->resource[0]; if (!res->flags) { - printk(KERN_ERR "%s: no IO resource for PHB %s\n", __FUNCTION__, + printk(KERN_ERR "%s: no IO resource for PHB %s\n", __func__, b->name); return 1; } @@ -334,13 +319,13 @@ int pcibios_remove_root_bus(struct pci_controller *phb) rc = pcibios_unmap_io_space(b); if (rc) { printk(KERN_ERR "%s: failed to unmap IO on bus %s\n", - __FUNCTION__, b->name); + __func__, b->name); return 1; } if (release_resource(res)) { printk(KERN_ERR "%s: failed to release IO on bus %s\n", - __FUNCTION__, b->name); + __func__, b->name); return 1; } @@ -348,13 +333,13 @@ int pcibios_remove_root_bus(struct pci_controller *phb) res = b->resource[i]; if (!res->flags && i == 0) { printk(KERN_ERR "%s: no MEM resource for PHB %s\n", - __FUNCTION__, b->name); + __func__, b->name); return 1; } if (res->flags && release_resource(res)) { printk(KERN_ERR "%s: failed to release IO %d on bus %s\n", - __FUNCTION__, i, b->name); + __func__, i, b->name); return 1; } } diff --git a/arch/powerpc/kernel/semaphore.c b/arch/powerpc/kernel/semaphore.c deleted file mode 100644 index 2f8c3c951394..000000000000 --- a/arch/powerpc/kernel/semaphore.c +++ /dev/null @@ -1,135 +0,0 @@ -/* - * PowerPC-specific semaphore code. - * - * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * April 2001 - Reworked by Paul Mackerras <paulus@samba.org> - * to eliminate the SMP races in the old version between the updates - * of `count' and `waking'. Now we use negative `count' values to - * indicate that some process(es) are waiting for the semaphore. - */ - -#include <linux/sched.h> -#include <linux/init.h> -#include <linux/module.h> - -#include <asm/atomic.h> -#include <asm/semaphore.h> -#include <asm/errno.h> - -/* - * Atomically update sem->count. - * This does the equivalent of the following: - * - * old_count = sem->count; - * tmp = MAX(old_count, 0) + incr; - * sem->count = tmp; - * return old_count; - */ -static inline int __sem_update_count(struct semaphore *sem, int incr) -{ - int old_count, tmp; - - __asm__ __volatile__("\n" -"1: lwarx %0,0,%3\n" -" srawi %1,%0,31\n" -" andc %1,%0,%1\n" -" add %1,%1,%4\n" - PPC405_ERR77(0,%3) -" stwcx. %1,0,%3\n" -" bne 1b" - : "=&r" (old_count), "=&r" (tmp), "=m" (sem->count) - : "r" (&sem->count), "r" (incr), "m" (sem->count) - : "cc"); - - return old_count; -} - -void __up(struct semaphore *sem) -{ - /* - * Note that we incremented count in up() before we came here, - * but that was ineffective since the result was <= 0, and - * any negative value of count is equivalent to 0. - * This ends up setting count to 1, unless count is now > 0 - * (i.e. because some other cpu has called up() in the meantime), - * in which case we just increment count. - */ - __sem_update_count(sem, 1); - wake_up(&sem->wait); -} -EXPORT_SYMBOL(__up); - -/* - * Note that when we come in to __down or __down_interruptible, - * we have already decremented count, but that decrement was - * ineffective since the result was < 0, and any negative value - * of count is equivalent to 0. - * Thus it is only when we decrement count from some value > 0 - * that we have actually got the semaphore. - */ -void __sched __down(struct semaphore *sem) -{ - struct task_struct *tsk = current; - DECLARE_WAITQUEUE(wait, tsk); - - __set_task_state(tsk, TASK_UNINTERRUPTIBLE); - add_wait_queue_exclusive(&sem->wait, &wait); - - /* - * Try to get the semaphore. If the count is > 0, then we've - * got the semaphore; we decrement count and exit the loop. - * If the count is 0 or negative, we set it to -1, indicating - * that we are asleep, and then sleep. - */ - while (__sem_update_count(sem, -1) <= 0) { - schedule(); - set_task_state(tsk, TASK_UNINTERRUPTIBLE); - } - remove_wait_queue(&sem->wait, &wait); - __set_task_state(tsk, TASK_RUNNING); - - /* - * If there are any more sleepers, wake one of them up so - * that it can either get the semaphore, or set count to -1 - * indicating that there are still processes sleeping. - */ - wake_up(&sem->wait); -} -EXPORT_SYMBOL(__down); - -int __sched __down_interruptible(struct semaphore * sem) -{ - int retval = 0; - struct task_struct *tsk = current; - DECLARE_WAITQUEUE(wait, tsk); - - __set_task_state(tsk, TASK_INTERRUPTIBLE); - add_wait_queue_exclusive(&sem->wait, &wait); - - while (__sem_update_count(sem, -1) <= 0) { - if (signal_pending(current)) { - /* - * A signal is pending - give up trying. - * Set sem->count to 0 if it is negative, - * since we are no longer sleeping. - */ - __sem_update_count(sem, 0); - retval = -EINTR; - break; - } - schedule(); - set_task_state(tsk, TASK_INTERRUPTIBLE); - } - remove_wait_queue(&sem->wait, &wait); - __set_task_state(tsk, TASK_RUNNING); - - wake_up(&sem->wait); - return retval; -} -EXPORT_SYMBOL(__down_interruptible); diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 6adb5a1e98bb..db540eab09f4 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -34,6 +34,7 @@ #include <linux/serial_8250.h> #include <linux/debugfs.h> #include <linux/percpu.h> +#include <linux/lmb.h> #include <asm/io.h> #include <asm/prom.h> #include <asm/processor.h> @@ -56,7 +57,6 @@ #include <asm/cache.h> #include <asm/page.h> #include <asm/mmu.h> -#include <asm/lmb.h> #include <asm/xmon.h> #include <asm/cputhreads.h> @@ -167,6 +167,8 @@ static int show_cpuinfo(struct seq_file *m, void *v) unsigned short min; if (cpu_id == NR_CPUS) { + struct device_node *root; + const char *model = NULL; #if defined(CONFIG_SMP) && defined(CONFIG_PPC32) unsigned long bogosum = 0; int i; @@ -178,6 +180,13 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq); if (ppc_md.name) seq_printf(m, "platform\t: %s\n", ppc_md.name); + root = of_find_node_by_path("/"); + if (root) + model = of_get_property(root, "model", NULL); + if (model) + seq_printf(m, "model\t\t: %s\n", model); + of_node_put(root); + if (ppc_md.show_cpuinfo != NULL) ppc_md.show_cpuinfo(m); diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index cd870a823d18..36f6779c88d4 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -10,9 +10,6 @@ #include <linux/reboot.h> #include <linux/delay.h> #include <linux/initrd.h> -#if defined(CONFIG_IDE) || defined(CONFIG_IDE_MODULE) -#include <linux/ide.h> -#endif #include <linux/tty.h> #include <linux/bootmem.h> #include <linux/seq_file.h> @@ -51,11 +48,6 @@ extern void bootx_init(unsigned long r4, unsigned long phys); -#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) -struct ide_machdep_calls ppc_ide_md; -EXPORT_SYMBOL(ppc_ide_md); -#endif - int boot_cpuid; EXPORT_SYMBOL_GPL(boot_cpuid); int boot_cpuid_phys; @@ -172,6 +164,18 @@ int __init ppc_setup_l2cr(char *str) } __setup("l2cr=", ppc_setup_l2cr); +/* Checks "l3cr=xxxx" command-line option */ +int __init ppc_setup_l3cr(char *str) +{ + if (cpu_has_feature(CPU_FTR_L3CR)) { + unsigned long val = simple_strtoul(str, NULL, 0); + printk(KERN_INFO "l3cr set to %lx\n", val); + _set_L3CR(val); /* and enable it */ + } + return 1; +} +__setup("l3cr=", ppc_setup_l3cr); + #ifdef CONFIG_GENERIC_NVRAM /* Generic nvram hooks used by drivers/char/gen_nvram.c */ @@ -277,7 +281,7 @@ void __init setup_arch(char **cmdline_p) if (ppc_md.panic) setup_panic(); - init_mm.start_code = PAGE_OFFSET; + init_mm.start_code = (unsigned long)_stext; init_mm.end_code = (unsigned long) _etext; init_mm.end_data = (unsigned long) _edata; init_mm.brk = klimit; diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 3b1529c103ef..dff6308d1b5e 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -33,6 +33,8 @@ #include <linux/serial_8250.h> #include <linux/bootmem.h> #include <linux/pci.h> +#include <linux/lockdep.h> +#include <linux/lmb.h> #include <asm/io.h> #include <asm/kdump.h> #include <asm/prom.h> @@ -55,7 +57,6 @@ #include <asm/cache.h> #include <asm/page.h> #include <asm/mmu.h> -#include <asm/lmb.h> #include <asm/firmware.h> #include <asm/xmon.h> #include <asm/udbg.h> @@ -169,6 +170,9 @@ void __init setup_paca(int cpu) void __init early_setup(unsigned long dt_ptr) { + /* Fill in any unititialised pacas */ + initialise_pacas(); + /* Identify CPU type */ identify_cpu(0, mfspr(SPRN_PVR)); @@ -178,6 +182,9 @@ void __init early_setup(unsigned long dt_ptr) /* Enable early debugging if any specified (see udbg.h) */ udbg_early_init(); + /* Initialize lockdep early or else spinlocks will blow */ + lockdep_init(); + DBG(" -> early_setup(), dt_ptr: 0x%lx\n", dt_ptr); /* @@ -431,7 +438,7 @@ void __init setup_system(void) printk("htab_address = 0x%p\n", htab_address); printk("htab_hash_mask = 0x%lx\n", htab_hash_mask); #if PHYSICAL_START > 0 - printk("physical_start = 0x%x\n", PHYSICAL_START); + printk("physical_start = 0x%lx\n", PHYSICAL_START); #endif printk("-----------------------------------------------------\n"); @@ -510,7 +517,7 @@ void __init setup_arch(char **cmdline_p) if (ppc_md.panic) setup_panic(); - init_mm.start_code = PAGE_OFFSET; + init_mm.start_code = (unsigned long)_stext; init_mm.end_code = (unsigned long) _etext; init_mm.end_data = (unsigned long) _edata; init_mm.brk = klimit; diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index d840bc772fd3..ad6943468ee9 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -621,6 +621,18 @@ int copy_siginfo_to_user32(struct compat_siginfo __user *d, siginfo_t *s) #define copy_siginfo_to_user copy_siginfo_to_user32 +int copy_siginfo_from_user32(siginfo_t *to, struct compat_siginfo __user *from) +{ + memset(to, 0, sizeof *to); + + if (copy_from_user(to, from, 3*sizeof(int)) || + copy_from_user(to->_sifields._pad, + from->_sifields._pad, SI_PAD_SIZE32)) + return -EFAULT; + + return 0; +} + /* * Note: it is necessary to treat pid and sig as unsigned ints, with the * corresponding cast to a signed int to insure that the proper conversion @@ -634,9 +646,10 @@ long compat_sys_rt_sigqueueinfo(u32 pid, u32 sig, compat_siginfo_t __user *uinfo int ret; mm_segment_t old_fs = get_fs(); - if (copy_from_user (&info, uinfo, 3*sizeof(int)) || - copy_from_user (info._sifields._pad, uinfo->_sifields._pad, SI_PAD_SIZE32)) - return -EFAULT; + ret = copy_siginfo_from_user32(&info, uinfo); + if (unlikely(ret)) + return ret; + set_fs (KERNEL_DS); /* The __user pointer cast is valid becasuse of the set_fs() */ ret = sys_rt_sigqueueinfo((int)pid, (int)sig, (siginfo_t __user *) &info); diff --git a/arch/powerpc/kernel/stacktrace.c b/arch/powerpc/kernel/stacktrace.c new file mode 100644 index 000000000000..962944038430 --- /dev/null +++ b/arch/powerpc/kernel/stacktrace.c @@ -0,0 +1,46 @@ +/* + * Stack trace utility + * + * Copyright 2008 Christoph Hellwig, IBM Corp. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/sched.h> +#include <linux/stacktrace.h> +#include <asm/ptrace.h> + +/* + * Save stack-backtrace addresses into a stack_trace buffer. + */ +void save_stack_trace(struct stack_trace *trace) +{ + unsigned long sp; + + asm("mr %0,1" : "=r" (sp)); + + for (;;) { + unsigned long *stack = (unsigned long *) sp; + unsigned long newsp, ip; + + if (!validate_sp(sp, current, STACK_FRAME_OVERHEAD)) + return; + + newsp = stack[0]; + ip = stack[STACK_FRAME_LR_SAVE]; + + if (!trace->skip) + trace->entries[trace->nr_entries++] = ip; + else + trace->skip--; + + if (trace->nr_entries >= trace->max_entries) + return; + + sp = newsp; + } +} diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c index 4a4f5c6b560b..709f8cb8bfca 100644 --- a/arch/powerpc/kernel/sys_ppc32.c +++ b/arch/powerpc/kernel/sys_ppc32.c @@ -47,7 +47,6 @@ #include <asm/types.h> #include <asm/uaccess.h> #include <asm/unistd.h> -#include <asm/semaphore.h> #include <asm/time.h> #include <asm/mmu_context.h> #include <asm/ppc-pci.h> @@ -368,11 +367,6 @@ long compat_sys_execve(unsigned long a0, unsigned long a1, unsigned long a2, error = compat_do_execve(filename, compat_ptr(a1), compat_ptr(a2), regs); - if (error == 0) { - task_lock(current); - current->ptrace &= ~PT_DTRACE; - task_unlock(current); - } putname(filename); out: diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c index 3b1d5dd65643..e722a4eeb5d0 100644 --- a/arch/powerpc/kernel/syscalls.c +++ b/arch/powerpc/kernel/syscalls.c @@ -38,7 +38,6 @@ #include <linux/personality.h> #include <asm/uaccess.h> -#include <asm/semaphore.h> #include <asm/syscalls.h> #include <asm/time.h> #include <asm/unistd.h> diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c index 7aad6203e411..7d6c9bb8c77f 100644 --- a/arch/powerpc/kernel/udbg.c +++ b/arch/powerpc/kernel/udbg.c @@ -154,8 +154,8 @@ static void udbg_console_write(struct console *con, const char *s, static struct console udbg_console = { .name = "udbg", .write = udbg_console_write, - .flags = CON_PRINTBUFFER | CON_ENABLED | CON_BOOT, - .index = -1, + .flags = CON_PRINTBUFFER | CON_ENABLED | CON_BOOT | CON_ANYTIME, + .index = 0, }; static int early_console_initialized; diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c index d3437c4c4a6f..c21a626af676 100644 --- a/arch/powerpc/kernel/vdso.c +++ b/arch/powerpc/kernel/vdso.c @@ -21,13 +21,14 @@ #include <linux/elf.h> #include <linux/security.h> #include <linux/bootmem.h> +#include <linux/lmb.h> #include <asm/pgtable.h> #include <asm/system.h> #include <asm/processor.h> #include <asm/mmu.h> #include <asm/mmu_context.h> -#include <asm/lmb.h> +#include <asm/prom.h> #include <asm/machdep.h> #include <asm/cputable.h> #include <asm/sections.h> diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c index f98867252ee2..b77f8af7ddde 100644 --- a/arch/powerpc/kernel/vio.c +++ b/arch/powerpc/kernel/vio.c @@ -139,7 +139,7 @@ static int vio_bus_remove(struct device *dev) */ int vio_register_driver(struct vio_driver *viodrv) { - printk(KERN_DEBUG "%s: driver %s registering\n", __FUNCTION__, + printk(KERN_DEBUG "%s: driver %s registering\n", __func__, viodrv->driver.name); /* fill in 'struct driver' fields */ @@ -184,7 +184,7 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node) /* we need the 'device_type' property, in order to match with drivers */ if (of_node->type == NULL) { printk(KERN_WARNING "%s: node %s missing 'device_type'\n", - __FUNCTION__, + __func__, of_node->name ? of_node->name : "<unknown>"); return NULL; } @@ -192,7 +192,7 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node) unit_address = of_get_property(of_node, "reg", NULL); if (unit_address == NULL) { printk(KERN_WARNING "%s: node %s missing 'reg'\n", - __FUNCTION__, + __func__, of_node->name ? of_node->name : "<unknown>"); return NULL; } @@ -227,7 +227,7 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node) /* register with generic device framework */ if (device_register(&viodev->dev)) { printk(KERN_ERR "%s: failed to register device %s\n", - __FUNCTION__, viodev->dev.bus_id); + __func__, viodev->dev.bus_id); /* XXX free TCE table */ kfree(viodev); return NULL; @@ -258,7 +258,7 @@ static int __init vio_bus_init(void) err = device_register(&vio_bus_device.dev); if (err) { printk(KERN_WARNING "%s: device_register returned %i\n", - __FUNCTION__, err); + __func__, err); return err; } diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 0afb9e31d2a0..0c3000bf8d75 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -1,11 +1,9 @@ #ifdef CONFIG_PPC64 -#include <asm/page.h> #define PROVIDE32(x) PROVIDE(__unused__##x) #else -#define PAGE_SIZE 4096 -#define KERNELBASE CONFIG_KERNEL_START #define PROVIDE32(x) PROVIDE(x) #endif +#include <asm/page.h> #include <asm-generic/vmlinux.lds.h> #include <asm/cache.h> @@ -33,7 +31,7 @@ SECTIONS */ /* Text and gots */ - .text : { + .text : AT(ADDR(.text) - LOAD_OFFSET) { ALIGN_FUNCTION(); *(.text.head) _text = .; @@ -58,7 +56,7 @@ SECTIONS RODATA /* Exception & bug tables */ - __ex_table : { + __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { __start___ex_table = .; *(__ex_table) __stop___ex_table = .; @@ -74,7 +72,7 @@ SECTIONS . = ALIGN(PAGE_SIZE); __init_begin = .; - .init.text : { + .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) { _sinittext = .; INIT_TEXT _einittext = .; @@ -83,11 +81,11 @@ SECTIONS /* .exit.text is discarded at runtime, not link time, * to deal with references from __bug_table */ - .exit.text : { + .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { EXIT_TEXT } - .init.data : { + .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { INIT_DATA __vtop_table_begin = .; *(.vtop_fixup); @@ -103,19 +101,19 @@ SECTIONS } . = ALIGN(16); - .init.setup : { + .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) { __setup_start = .; *(.init.setup) __setup_end = .; } - .initcall.init : { + .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) { __initcall_start = .; INITCALLS __initcall_end = .; } - .con_initcall.init : { + .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) { __con_initcall_start = .; *(.con_initcall.init) __con_initcall_end = .; @@ -124,14 +122,14 @@ SECTIONS SECURITY_INIT . = ALIGN(8); - __ftr_fixup : { + __ftr_fixup : AT(ADDR(__ftr_fixup) - LOAD_OFFSET) { __start___ftr_fixup = .; *(__ftr_fixup) __stop___ftr_fixup = .; } #ifdef CONFIG_PPC64 . = ALIGN(8); - __fw_ftr_fixup : { + __fw_ftr_fixup : AT(ADDR(__fw_ftr_fixup) - LOAD_OFFSET) { __start___fw_ftr_fixup = .; *(__fw_ftr_fixup) __stop___fw_ftr_fixup = .; @@ -139,14 +137,14 @@ SECTIONS #endif #ifdef CONFIG_BLK_DEV_INITRD . = ALIGN(PAGE_SIZE); - .init.ramfs : { + .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { __initramfs_start = .; *(.init.ramfs) __initramfs_end = .; } #endif . = ALIGN(PAGE_SIZE); - .data.percpu : { + .data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { __per_cpu_start = .; *(.data.percpu) *(.data.percpu.shared_aligned) @@ -154,7 +152,7 @@ SECTIONS } . = ALIGN(8); - .machine.desc : { + .machine.desc : AT(ADDR(.machine.desc) - LOAD_OFFSET) { __machine_desc_start = . ; *(.machine.desc) __machine_desc_end = . ; @@ -172,25 +170,24 @@ SECTIONS _sdata = .; #ifdef CONFIG_PPC32 - .data : - { + .data : AT(ADDR(.data) - LOAD_OFFSET) { DATA_DATA *(.sdata) *(.got.plt) *(.got) } #else - .data : { + .data : AT(ADDR(.data) - LOAD_OFFSET) { DATA_DATA *(.data.rel*) *(.toc1) *(.branch_lt) } - .opd : { + .opd : AT(ADDR(.opd) - LOAD_OFFSET) { *(.opd) } - .got : { + .got : AT(ADDR(.got) - LOAD_OFFSET) { __toc_start = .; *(.got) *(.toc) @@ -207,26 +204,26 @@ SECTIONS #else . = ALIGN(16384); #endif - .data.init_task : { + .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) { *(.data.init_task) } . = ALIGN(PAGE_SIZE); - .data.page_aligned : { + .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) { *(.data.page_aligned) } - .data.cacheline_aligned : { + .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) { *(.data.cacheline_aligned) } . = ALIGN(L1_CACHE_BYTES); - .data.read_mostly : { + .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) { *(.data.read_mostly) } . = ALIGN(PAGE_SIZE); - __data_nosave : { + .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { __nosave_begin = .; *(.data.nosave) . = ALIGN(PAGE_SIZE); @@ -237,7 +234,7 @@ SECTIONS * And finally the bss */ - .bss : { + .bss : AT(ADDR(.bss) - LOAD_OFFSET) { __bss_start = .; *(.sbss) *(.scommon) *(.dynbss) diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c new file mode 100644 index 000000000000..f5d7a5eab96e --- /dev/null +++ b/arch/powerpc/kvm/44x_tlb.c @@ -0,0 +1,224 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Copyright IBM Corp. 2007 + * + * Authors: Hollis Blanchard <hollisb@us.ibm.com> + */ + +#include <linux/types.h> +#include <linux/string.h> +#include <linux/kvm_host.h> +#include <linux/highmem.h> +#include <asm/mmu-44x.h> +#include <asm/kvm_ppc.h> + +#include "44x_tlb.h" + +#define PPC44x_TLB_USER_PERM_MASK (PPC44x_TLB_UX|PPC44x_TLB_UR|PPC44x_TLB_UW) +#define PPC44x_TLB_SUPER_PERM_MASK (PPC44x_TLB_SX|PPC44x_TLB_SR|PPC44x_TLB_SW) + +static unsigned int kvmppc_tlb_44x_pos; + +static u32 kvmppc_44x_tlb_shadow_attrib(u32 attrib, int usermode) +{ + /* Mask off reserved bits. */ + attrib &= PPC44x_TLB_PERM_MASK|PPC44x_TLB_ATTR_MASK; + + if (!usermode) { + /* Guest is in supervisor mode, so we need to translate guest + * supervisor permissions into user permissions. */ + attrib &= ~PPC44x_TLB_USER_PERM_MASK; + attrib |= (attrib & PPC44x_TLB_SUPER_PERM_MASK) << 3; + } + + /* Make sure host can always access this memory. */ + attrib |= PPC44x_TLB_SX|PPC44x_TLB_SR|PPC44x_TLB_SW; + + return attrib; +} + +/* Search the guest TLB for a matching entry. */ +int kvmppc_44x_tlb_index(struct kvm_vcpu *vcpu, gva_t eaddr, unsigned int pid, + unsigned int as) +{ + int i; + + /* XXX Replace loop with fancy data structures. */ + for (i = 0; i < PPC44x_TLB_SIZE; i++) { + struct tlbe *tlbe = &vcpu->arch.guest_tlb[i]; + unsigned int tid; + + if (eaddr < get_tlb_eaddr(tlbe)) + continue; + + if (eaddr > get_tlb_end(tlbe)) + continue; + + tid = get_tlb_tid(tlbe); + if (tid && (tid != pid)) + continue; + + if (!get_tlb_v(tlbe)) + continue; + + if (get_tlb_ts(tlbe) != as) + continue; + + return i; + } + + return -1; +} + +struct tlbe *kvmppc_44x_itlb_search(struct kvm_vcpu *vcpu, gva_t eaddr) +{ + unsigned int as = !!(vcpu->arch.msr & MSR_IS); + unsigned int index; + + index = kvmppc_44x_tlb_index(vcpu, eaddr, vcpu->arch.pid, as); + if (index == -1) + return NULL; + return &vcpu->arch.guest_tlb[index]; +} + +struct tlbe *kvmppc_44x_dtlb_search(struct kvm_vcpu *vcpu, gva_t eaddr) +{ + unsigned int as = !!(vcpu->arch.msr & MSR_DS); + unsigned int index; + + index = kvmppc_44x_tlb_index(vcpu, eaddr, vcpu->arch.pid, as); + if (index == -1) + return NULL; + return &vcpu->arch.guest_tlb[index]; +} + +static int kvmppc_44x_tlbe_is_writable(struct tlbe *tlbe) +{ + return tlbe->word2 & (PPC44x_TLB_SW|PPC44x_TLB_UW); +} + +/* Must be called with mmap_sem locked for writing. */ +static void kvmppc_44x_shadow_release(struct kvm_vcpu *vcpu, + unsigned int index) +{ + struct tlbe *stlbe = &vcpu->arch.shadow_tlb[index]; + struct page *page = vcpu->arch.shadow_pages[index]; + + kunmap(vcpu->arch.shadow_pages[index]); + + if (get_tlb_v(stlbe)) { + if (kvmppc_44x_tlbe_is_writable(stlbe)) + kvm_release_page_dirty(page); + else + kvm_release_page_clean(page); + } +} + +/* Caller must ensure that the specified guest TLB entry is safe to insert into + * the shadow TLB. */ +void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn, u64 asid, + u32 flags) +{ + struct page *new_page; + struct tlbe *stlbe; + hpa_t hpaddr; + unsigned int victim; + + /* Future optimization: don't overwrite the TLB entry containing the + * current PC (or stack?). */ + victim = kvmppc_tlb_44x_pos++; + if (kvmppc_tlb_44x_pos > tlb_44x_hwater) + kvmppc_tlb_44x_pos = 0; + stlbe = &vcpu->arch.shadow_tlb[victim]; + + /* Get reference to new page. */ + down_write(¤t->mm->mmap_sem); + new_page = gfn_to_page(vcpu->kvm, gfn); + if (is_error_page(new_page)) { + printk(KERN_ERR "Couldn't get guest page!\n"); + kvm_release_page_clean(new_page); + return; + } + hpaddr = page_to_phys(new_page); + + /* Drop reference to old page. */ + kvmppc_44x_shadow_release(vcpu, victim); + up_write(¤t->mm->mmap_sem); + + vcpu->arch.shadow_pages[victim] = new_page; + + /* XXX Make sure (va, size) doesn't overlap any other + * entries. 440x6 user manual says the result would be + * "undefined." */ + + /* XXX what about AS? */ + + stlbe->tid = asid & 0xff; + + /* Force TS=1 for all guest mappings. */ + /* For now we hardcode 4KB mappings, but it will be important to + * use host large pages in the future. */ + stlbe->word0 = (gvaddr & PAGE_MASK) | PPC44x_TLB_VALID | PPC44x_TLB_TS + | PPC44x_TLB_4K; + + stlbe->word1 = (hpaddr & 0xfffffc00) | ((hpaddr >> 32) & 0xf); + stlbe->word2 = kvmppc_44x_tlb_shadow_attrib(flags, + vcpu->arch.msr & MSR_PR); +} + +void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, u64 eaddr, u64 asid) +{ + unsigned int pid = asid & 0xff; + int i; + + /* XXX Replace loop with fancy data structures. */ + down_write(¤t->mm->mmap_sem); + for (i = 0; i <= tlb_44x_hwater; i++) { + struct tlbe *stlbe = &vcpu->arch.shadow_tlb[i]; + unsigned int tid; + + if (!get_tlb_v(stlbe)) + continue; + + if (eaddr < get_tlb_eaddr(stlbe)) + continue; + + if (eaddr > get_tlb_end(stlbe)) + continue; + + tid = get_tlb_tid(stlbe); + if (tid && (tid != pid)) + continue; + + kvmppc_44x_shadow_release(vcpu, i); + stlbe->word0 = 0; + } + up_write(¤t->mm->mmap_sem); +} + +/* Invalidate all mappings, so that when they fault back in they will get the + * proper permission bits. */ +void kvmppc_mmu_priv_switch(struct kvm_vcpu *vcpu, int usermode) +{ + int i; + + /* XXX Replace loop with fancy data structures. */ + down_write(¤t->mm->mmap_sem); + for (i = 0; i <= tlb_44x_hwater; i++) { + kvmppc_44x_shadow_release(vcpu, i); + vcpu->arch.shadow_tlb[i].word0 = 0; + } + up_write(¤t->mm->mmap_sem); +} diff --git a/arch/powerpc/kvm/44x_tlb.h b/arch/powerpc/kvm/44x_tlb.h new file mode 100644 index 000000000000..2ccd46b6f6b7 --- /dev/null +++ b/arch/powerpc/kvm/44x_tlb.h @@ -0,0 +1,91 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Copyright IBM Corp. 2007 + * + * Authors: Hollis Blanchard <hollisb@us.ibm.com> + */ + +#ifndef __KVM_POWERPC_TLB_H__ +#define __KVM_POWERPC_TLB_H__ + +#include <linux/kvm_host.h> +#include <asm/mmu-44x.h> + +extern int kvmppc_44x_tlb_index(struct kvm_vcpu *vcpu, gva_t eaddr, + unsigned int pid, unsigned int as); +extern struct tlbe *kvmppc_44x_dtlb_search(struct kvm_vcpu *vcpu, gva_t eaddr); +extern struct tlbe *kvmppc_44x_itlb_search(struct kvm_vcpu *vcpu, gva_t eaddr); + +/* TLB helper functions */ +static inline unsigned int get_tlb_size(const struct tlbe *tlbe) +{ + return (tlbe->word0 >> 4) & 0xf; +} + +static inline gva_t get_tlb_eaddr(const struct tlbe *tlbe) +{ + return tlbe->word0 & 0xfffffc00; +} + +static inline gva_t get_tlb_bytes(const struct tlbe *tlbe) +{ + unsigned int pgsize = get_tlb_size(tlbe); + return 1 << 10 << (pgsize << 1); +} + +static inline gva_t get_tlb_end(const struct tlbe *tlbe) +{ + return get_tlb_eaddr(tlbe) + get_tlb_bytes(tlbe) - 1; +} + +static inline u64 get_tlb_raddr(const struct tlbe *tlbe) +{ + u64 word1 = tlbe->word1; + return ((word1 & 0xf) << 32) | (word1 & 0xfffffc00); +} + +static inline unsigned int get_tlb_tid(const struct tlbe *tlbe) +{ + return tlbe->tid & 0xff; +} + +static inline unsigned int get_tlb_ts(const struct tlbe *tlbe) +{ + return (tlbe->word0 >> 8) & 0x1; +} + +static inline unsigned int get_tlb_v(const struct tlbe *tlbe) +{ + return (tlbe->word0 >> 9) & 0x1; +} + +static inline unsigned int get_mmucr_stid(const struct kvm_vcpu *vcpu) +{ + return vcpu->arch.mmucr & 0xff; +} + +static inline unsigned int get_mmucr_sts(const struct kvm_vcpu *vcpu) +{ + return (vcpu->arch.mmucr >> 16) & 0x1; +} + +static inline gpa_t tlb_xlate(struct tlbe *tlbe, gva_t eaddr) +{ + unsigned int pgmask = get_tlb_bytes(tlbe) - 1; + + return get_tlb_raddr(tlbe) | (eaddr & pgmask); +} + +#endif /* __KVM_POWERPC_TLB_H__ */ diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig new file mode 100644 index 000000000000..6b076010213b --- /dev/null +++ b/arch/powerpc/kvm/Kconfig @@ -0,0 +1,42 @@ +# +# KVM configuration +# + +menuconfig VIRTUALIZATION + bool "Virtualization" + ---help--- + Say Y here to get to see options for using your Linux host to run + other operating systems inside virtual machines (guests). + This option alone does not add any kernel code. + + If you say N, all options in this submenu will be skipped and + disabled. + +if VIRTUALIZATION + +config KVM + bool "Kernel-based Virtual Machine (KVM) support" + depends on 44x && EXPERIMENTAL + select PREEMPT_NOTIFIERS + select ANON_INODES + # We can only run on Book E hosts so far + select KVM_BOOKE_HOST + ---help--- + Support hosting virtualized guest machines. You will also + need to select one or more of the processor modules below. + + This module provides access to the hardware capabilities through + a character device node named /dev/kvm. + + If unsure, say N. + +config KVM_BOOKE_HOST + bool "KVM host support for Book E PowerPC processors" + depends on KVM && 44x + ---help--- + Provides host support for KVM on Book E PowerPC processors. Currently + this works on 440 processors only. + +source drivers/virtio/Kconfig + +endif # VIRTUALIZATION diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile new file mode 100644 index 000000000000..d0d358d367ec --- /dev/null +++ b/arch/powerpc/kvm/Makefile @@ -0,0 +1,15 @@ +# +# Makefile for Kernel-based Virtual Machine module +# + +EXTRA_CFLAGS += -Ivirt/kvm -Iarch/powerpc/kvm + +common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o) + +kvm-objs := $(common-objs) powerpc.o emulate.o booke_guest.o +obj-$(CONFIG_KVM) += kvm.o + +AFLAGS_booke_interrupts.o := -I$(obj) + +kvm-booke-host-objs := booke_host.o booke_interrupts.o 44x_tlb.o +obj-$(CONFIG_KVM_BOOKE_HOST) += kvm-booke-host.o diff --git a/arch/powerpc/kvm/booke_guest.c b/arch/powerpc/kvm/booke_guest.c new file mode 100644 index 000000000000..6d9884a6884a --- /dev/null +++ b/arch/powerpc/kvm/booke_guest.c @@ -0,0 +1,615 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Copyright IBM Corp. 2007 + * + * Authors: Hollis Blanchard <hollisb@us.ibm.com> + * Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> + */ + +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/kvm_host.h> +#include <linux/module.h> +#include <linux/vmalloc.h> +#include <linux/fs.h> +#include <asm/cputable.h> +#include <asm/uaccess.h> +#include <asm/kvm_ppc.h> + +#include "44x_tlb.h" + +#define VM_STAT(x) offsetof(struct kvm, stat.x), KVM_STAT_VM +#define VCPU_STAT(x) offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU + +struct kvm_stats_debugfs_item debugfs_entries[] = { + { "exits", VCPU_STAT(sum_exits) }, + { "mmio", VCPU_STAT(mmio_exits) }, + { "dcr", VCPU_STAT(dcr_exits) }, + { "sig", VCPU_STAT(signal_exits) }, + { "light", VCPU_STAT(light_exits) }, + { "itlb_r", VCPU_STAT(itlb_real_miss_exits) }, + { "itlb_v", VCPU_STAT(itlb_virt_miss_exits) }, + { "dtlb_r", VCPU_STAT(dtlb_real_miss_exits) }, + { "dtlb_v", VCPU_STAT(dtlb_virt_miss_exits) }, + { "sysc", VCPU_STAT(syscall_exits) }, + { "isi", VCPU_STAT(isi_exits) }, + { "dsi", VCPU_STAT(dsi_exits) }, + { "inst_emu", VCPU_STAT(emulated_inst_exits) }, + { "dec", VCPU_STAT(dec_exits) }, + { "ext_intr", VCPU_STAT(ext_intr_exits) }, + { NULL } +}; + +static const u32 interrupt_msr_mask[16] = { + [BOOKE_INTERRUPT_CRITICAL] = MSR_ME, + [BOOKE_INTERRUPT_MACHINE_CHECK] = 0, + [BOOKE_INTERRUPT_DATA_STORAGE] = MSR_CE|MSR_ME|MSR_DE, + [BOOKE_INTERRUPT_INST_STORAGE] = MSR_CE|MSR_ME|MSR_DE, + [BOOKE_INTERRUPT_EXTERNAL] = MSR_CE|MSR_ME|MSR_DE, + [BOOKE_INTERRUPT_ALIGNMENT] = MSR_CE|MSR_ME|MSR_DE, + [BOOKE_INTERRUPT_PROGRAM] = MSR_CE|MSR_ME|MSR_DE, + [BOOKE_INTERRUPT_FP_UNAVAIL] = MSR_CE|MSR_ME|MSR_DE, + [BOOKE_INTERRUPT_SYSCALL] = MSR_CE|MSR_ME|MSR_DE, + [BOOKE_INTERRUPT_AP_UNAVAIL] = MSR_CE|MSR_ME|MSR_DE, + [BOOKE_INTERRUPT_DECREMENTER] = MSR_CE|MSR_ME|MSR_DE, + [BOOKE_INTERRUPT_FIT] = MSR_CE|MSR_ME|MSR_DE, + [BOOKE_INTERRUPT_WATCHDOG] = MSR_ME, + [BOOKE_INTERRUPT_DTLB_MISS] = MSR_CE|MSR_ME|MSR_DE, + [BOOKE_INTERRUPT_ITLB_MISS] = MSR_CE|MSR_ME|MSR_DE, + [BOOKE_INTERRUPT_DEBUG] = MSR_ME, +}; + +const unsigned char exception_priority[] = { + [BOOKE_INTERRUPT_DATA_STORAGE] = 0, + [BOOKE_INTERRUPT_INST_STORAGE] = 1, + [BOOKE_INTERRUPT_ALIGNMENT] = 2, + [BOOKE_INTERRUPT_PROGRAM] = 3, + [BOOKE_INTERRUPT_FP_UNAVAIL] = 4, + [BOOKE_INTERRUPT_SYSCALL] = 5, + [BOOKE_INTERRUPT_AP_UNAVAIL] = 6, + [BOOKE_INTERRUPT_DTLB_MISS] = 7, + [BOOKE_INTERRUPT_ITLB_MISS] = 8, + [BOOKE_INTERRUPT_MACHINE_CHECK] = 9, + [BOOKE_INTERRUPT_DEBUG] = 10, + [BOOKE_INTERRUPT_CRITICAL] = 11, + [BOOKE_INTERRUPT_WATCHDOG] = 12, + [BOOKE_INTERRUPT_EXTERNAL] = 13, + [BOOKE_INTERRUPT_FIT] = 14, + [BOOKE_INTERRUPT_DECREMENTER] = 15, +}; + +const unsigned char priority_exception[] = { + BOOKE_INTERRUPT_DATA_STORAGE, + BOOKE_INTERRUPT_INST_STORAGE, + BOOKE_INTERRUPT_ALIGNMENT, + BOOKE_INTERRUPT_PROGRAM, + BOOKE_INTERRUPT_FP_UNAVAIL, + BOOKE_INTERRUPT_SYSCALL, + BOOKE_INTERRUPT_AP_UNAVAIL, + BOOKE_INTERRUPT_DTLB_MISS, + BOOKE_INTERRUPT_ITLB_MISS, + BOOKE_INTERRUPT_MACHINE_CHECK, + BOOKE_INTERRUPT_DEBUG, + BOOKE_INTERRUPT_CRITICAL, + BOOKE_INTERRUPT_WATCHDOG, + BOOKE_INTERRUPT_EXTERNAL, + BOOKE_INTERRUPT_FIT, + BOOKE_INTERRUPT_DECREMENTER, +}; + + +void kvmppc_dump_tlbs(struct kvm_vcpu *vcpu) +{ + struct tlbe *tlbe; + int i; + + printk("vcpu %d TLB dump:\n", vcpu->vcpu_id); + printk("| %2s | %3s | %8s | %8s | %8s |\n", + "nr", "tid", "word0", "word1", "word2"); + + for (i = 0; i < PPC44x_TLB_SIZE; i++) { + tlbe = &vcpu->arch.guest_tlb[i]; + if (tlbe->word0 & PPC44x_TLB_VALID) + printk(" G%2d | %02X | %08X | %08X | %08X |\n", + i, tlbe->tid, tlbe->word0, tlbe->word1, + tlbe->word2); + } + + for (i = 0; i < PPC44x_TLB_SIZE; i++) { + tlbe = &vcpu->arch.shadow_tlb[i]; + if (tlbe->word0 & PPC44x_TLB_VALID) + printk(" S%2d | %02X | %08X | %08X | %08X |\n", + i, tlbe->tid, tlbe->word0, tlbe->word1, + tlbe->word2); + } +} + +/* TODO: use vcpu_printf() */ +void kvmppc_dump_vcpu(struct kvm_vcpu *vcpu) +{ + int i; + + printk("pc: %08x msr: %08x\n", vcpu->arch.pc, vcpu->arch.msr); + printk("lr: %08x ctr: %08x\n", vcpu->arch.lr, vcpu->arch.ctr); + printk("srr0: %08x srr1: %08x\n", vcpu->arch.srr0, vcpu->arch.srr1); + + printk("exceptions: %08lx\n", vcpu->arch.pending_exceptions); + + for (i = 0; i < 32; i += 4) { + printk("gpr%02d: %08x %08x %08x %08x\n", i, + vcpu->arch.gpr[i], + vcpu->arch.gpr[i+1], + vcpu->arch.gpr[i+2], + vcpu->arch.gpr[i+3]); + } +} + +/* Check if we are ready to deliver the interrupt */ +static int kvmppc_can_deliver_interrupt(struct kvm_vcpu *vcpu, int interrupt) +{ + int r; + + switch (interrupt) { + case BOOKE_INTERRUPT_CRITICAL: + r = vcpu->arch.msr & MSR_CE; + break; + case BOOKE_INTERRUPT_MACHINE_CHECK: + r = vcpu->arch.msr & MSR_ME; + break; + case BOOKE_INTERRUPT_EXTERNAL: + r = vcpu->arch.msr & MSR_EE; + break; + case BOOKE_INTERRUPT_DECREMENTER: + r = vcpu->arch.msr & MSR_EE; + break; + case BOOKE_INTERRUPT_FIT: + r = vcpu->arch.msr & MSR_EE; + break; + case BOOKE_INTERRUPT_WATCHDOG: + r = vcpu->arch.msr & MSR_CE; + break; + case BOOKE_INTERRUPT_DEBUG: + r = vcpu->arch.msr & MSR_DE; + break; + default: + r = 1; + } + + return r; +} + +static void kvmppc_deliver_interrupt(struct kvm_vcpu *vcpu, int interrupt) +{ + switch (interrupt) { + case BOOKE_INTERRUPT_DECREMENTER: + vcpu->arch.tsr |= TSR_DIS; + break; + } + + vcpu->arch.srr0 = vcpu->arch.pc; + vcpu->arch.srr1 = vcpu->arch.msr; + vcpu->arch.pc = vcpu->arch.ivpr | vcpu->arch.ivor[interrupt]; + kvmppc_set_msr(vcpu, vcpu->arch.msr & interrupt_msr_mask[interrupt]); +} + +/* Check pending exceptions and deliver one, if possible. */ +void kvmppc_check_and_deliver_interrupts(struct kvm_vcpu *vcpu) +{ + unsigned long *pending = &vcpu->arch.pending_exceptions; + unsigned int exception; + unsigned int priority; + + priority = find_first_bit(pending, BITS_PER_BYTE * sizeof(*pending)); + while (priority <= BOOKE_MAX_INTERRUPT) { + exception = priority_exception[priority]; + if (kvmppc_can_deliver_interrupt(vcpu, exception)) { + kvmppc_clear_exception(vcpu, exception); + kvmppc_deliver_interrupt(vcpu, exception); + break; + } + + priority = find_next_bit(pending, + BITS_PER_BYTE * sizeof(*pending), + priority + 1); + } +} + +static int kvmppc_emulate_mmio(struct kvm_run *run, struct kvm_vcpu *vcpu) +{ + enum emulation_result er; + int r; + + er = kvmppc_emulate_instruction(run, vcpu); + switch (er) { + case EMULATE_DONE: + /* Future optimization: only reload non-volatiles if they were + * actually modified. */ + r = RESUME_GUEST_NV; + break; + case EMULATE_DO_MMIO: + run->exit_reason = KVM_EXIT_MMIO; + /* We must reload nonvolatiles because "update" load/store + * instructions modify register state. */ + /* Future optimization: only reload non-volatiles if they were + * actually modified. */ + r = RESUME_HOST_NV; + break; + case EMULATE_FAIL: + /* XXX Deliver Program interrupt to guest. */ + printk(KERN_EMERG "%s: emulation failed (%08x)\n", __func__, + vcpu->arch.last_inst); + r = RESUME_HOST; + break; + default: + BUG(); + } + + return r; +} + +/** + * kvmppc_handle_exit + * + * Return value is in the form (errcode<<2 | RESUME_FLAG_HOST | RESUME_FLAG_NV) + */ +int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu, + unsigned int exit_nr) +{ + enum emulation_result er; + int r = RESUME_HOST; + + local_irq_enable(); + + run->exit_reason = KVM_EXIT_UNKNOWN; + run->ready_for_interrupt_injection = 1; + + switch (exit_nr) { + case BOOKE_INTERRUPT_MACHINE_CHECK: + printk("MACHINE CHECK: %lx\n", mfspr(SPRN_MCSR)); + kvmppc_dump_vcpu(vcpu); + r = RESUME_HOST; + break; + + case BOOKE_INTERRUPT_EXTERNAL: + case BOOKE_INTERRUPT_DECREMENTER: + /* Since we switched IVPR back to the host's value, the host + * handled this interrupt the moment we enabled interrupts. + * Now we just offer it a chance to reschedule the guest. */ + + /* XXX At this point the TLB still holds our shadow TLB, so if + * we do reschedule the host will fault over it. Perhaps we + * should politely restore the host's entries to minimize + * misses before ceding control. */ + if (need_resched()) + cond_resched(); + if (exit_nr == BOOKE_INTERRUPT_DECREMENTER) + vcpu->stat.dec_exits++; + else + vcpu->stat.ext_intr_exits++; + r = RESUME_GUEST; + break; + + case BOOKE_INTERRUPT_PROGRAM: + if (vcpu->arch.msr & MSR_PR) { + /* Program traps generated by user-level software must be handled + * by the guest kernel. */ + vcpu->arch.esr = vcpu->arch.fault_esr; + kvmppc_queue_exception(vcpu, BOOKE_INTERRUPT_PROGRAM); + r = RESUME_GUEST; + break; + } + + er = kvmppc_emulate_instruction(run, vcpu); + switch (er) { + case EMULATE_DONE: + /* Future optimization: only reload non-volatiles if + * they were actually modified by emulation. */ + vcpu->stat.emulated_inst_exits++; + r = RESUME_GUEST_NV; + break; + case EMULATE_DO_DCR: + run->exit_reason = KVM_EXIT_DCR; + r = RESUME_HOST; + break; + case EMULATE_FAIL: + /* XXX Deliver Program interrupt to guest. */ + printk(KERN_CRIT "%s: emulation at %x failed (%08x)\n", + __func__, vcpu->arch.pc, vcpu->arch.last_inst); + /* For debugging, encode the failing instruction and + * report it to userspace. */ + run->hw.hardware_exit_reason = ~0ULL << 32; + run->hw.hardware_exit_reason |= vcpu->arch.last_inst; + r = RESUME_HOST; + break; + default: + BUG(); + } + break; + + case BOOKE_INTERRUPT_DATA_STORAGE: + vcpu->arch.dear = vcpu->arch.fault_dear; + vcpu->arch.esr = vcpu->arch.fault_esr; + kvmppc_queue_exception(vcpu, exit_nr); + vcpu->stat.dsi_exits++; + r = RESUME_GUEST; + break; + + case BOOKE_INTERRUPT_INST_STORAGE: + vcpu->arch.esr = vcpu->arch.fault_esr; + kvmppc_queue_exception(vcpu, exit_nr); + vcpu->stat.isi_exits++; + r = RESUME_GUEST; + break; + + case BOOKE_INTERRUPT_SYSCALL: + kvmppc_queue_exception(vcpu, exit_nr); + vcpu->stat.syscall_exits++; + r = RESUME_GUEST; + break; + + case BOOKE_INTERRUPT_DTLB_MISS: { + struct tlbe *gtlbe; + unsigned long eaddr = vcpu->arch.fault_dear; + gfn_t gfn; + + /* Check the guest TLB. */ + gtlbe = kvmppc_44x_dtlb_search(vcpu, eaddr); + if (!gtlbe) { + /* The guest didn't have a mapping for it. */ + kvmppc_queue_exception(vcpu, exit_nr); + vcpu->arch.dear = vcpu->arch.fault_dear; + vcpu->arch.esr = vcpu->arch.fault_esr; + vcpu->stat.dtlb_real_miss_exits++; + r = RESUME_GUEST; + break; + } + + vcpu->arch.paddr_accessed = tlb_xlate(gtlbe, eaddr); + gfn = vcpu->arch.paddr_accessed >> PAGE_SHIFT; + + if (kvm_is_visible_gfn(vcpu->kvm, gfn)) { + /* The guest TLB had a mapping, but the shadow TLB + * didn't, and it is RAM. This could be because: + * a) the entry is mapping the host kernel, or + * b) the guest used a large mapping which we're faking + * Either way, we need to satisfy the fault without + * invoking the guest. */ + kvmppc_mmu_map(vcpu, eaddr, gfn, gtlbe->tid, + gtlbe->word2); + vcpu->stat.dtlb_virt_miss_exits++; + r = RESUME_GUEST; + } else { + /* Guest has mapped and accessed a page which is not + * actually RAM. */ + r = kvmppc_emulate_mmio(run, vcpu); + } + + break; + } + + case BOOKE_INTERRUPT_ITLB_MISS: { + struct tlbe *gtlbe; + unsigned long eaddr = vcpu->arch.pc; + gfn_t gfn; + + r = RESUME_GUEST; + + /* Check the guest TLB. */ + gtlbe = kvmppc_44x_itlb_search(vcpu, eaddr); + if (!gtlbe) { + /* The guest didn't have a mapping for it. */ + kvmppc_queue_exception(vcpu, exit_nr); + vcpu->stat.itlb_real_miss_exits++; + break; + } + + vcpu->stat.itlb_virt_miss_exits++; + + gfn = tlb_xlate(gtlbe, eaddr) >> PAGE_SHIFT; + + if (kvm_is_visible_gfn(vcpu->kvm, gfn)) { + /* The guest TLB had a mapping, but the shadow TLB + * didn't. This could be because: + * a) the entry is mapping the host kernel, or + * b) the guest used a large mapping which we're faking + * Either way, we need to satisfy the fault without + * invoking the guest. */ + kvmppc_mmu_map(vcpu, eaddr, gfn, gtlbe->tid, + gtlbe->word2); + } else { + /* Guest mapped and leaped at non-RAM! */ + kvmppc_queue_exception(vcpu, + BOOKE_INTERRUPT_MACHINE_CHECK); + } + + break; + } + + default: + printk(KERN_EMERG "exit_nr %d\n", exit_nr); + BUG(); + } + + local_irq_disable(); + + kvmppc_check_and_deliver_interrupts(vcpu); + + /* Do some exit accounting. */ + vcpu->stat.sum_exits++; + if (!(r & RESUME_HOST)) { + /* To avoid clobbering exit_reason, only check for signals if + * we aren't already exiting to userspace for some other + * reason. */ + if (signal_pending(current)) { + run->exit_reason = KVM_EXIT_INTR; + r = (-EINTR << 2) | RESUME_HOST | (r & RESUME_FLAG_NV); + + vcpu->stat.signal_exits++; + } else { + vcpu->stat.light_exits++; + } + } else { + switch (run->exit_reason) { + case KVM_EXIT_MMIO: + vcpu->stat.mmio_exits++; + break; + case KVM_EXIT_DCR: + vcpu->stat.dcr_exits++; + break; + case KVM_EXIT_INTR: + vcpu->stat.signal_exits++; + break; + } + } + + return r; +} + +/* Initial guest state: 16MB mapping 0 -> 0, PC = 0, MSR = 0, R1 = 16MB */ +int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu) +{ + struct tlbe *tlbe = &vcpu->arch.guest_tlb[0]; + + tlbe->tid = 0; + tlbe->word0 = PPC44x_TLB_16M | PPC44x_TLB_VALID; + tlbe->word1 = 0; + tlbe->word2 = PPC44x_TLB_SX | PPC44x_TLB_SW | PPC44x_TLB_SR; + + tlbe++; + tlbe->tid = 0; + tlbe->word0 = 0xef600000 | PPC44x_TLB_4K | PPC44x_TLB_VALID; + tlbe->word1 = 0xef600000; + tlbe->word2 = PPC44x_TLB_SX | PPC44x_TLB_SW | PPC44x_TLB_SR + | PPC44x_TLB_I | PPC44x_TLB_G; + + vcpu->arch.pc = 0; + vcpu->arch.msr = 0; + vcpu->arch.gpr[1] = (16<<20) - 8; /* -8 for the callee-save LR slot */ + + /* Eye-catching number so we know if the guest takes an interrupt + * before it's programmed its own IVPR. */ + vcpu->arch.ivpr = 0x55550000; + + /* Since the guest can directly access the timebase, it must know the + * real timebase frequency. Accordingly, it must see the state of + * CCR1[TCS]. */ + vcpu->arch.ccr1 = mfspr(SPRN_CCR1); + + return 0; +} + +int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) +{ + int i; + + regs->pc = vcpu->arch.pc; + regs->cr = vcpu->arch.cr; + regs->ctr = vcpu->arch.ctr; + regs->lr = vcpu->arch.lr; + regs->xer = vcpu->arch.xer; + regs->msr = vcpu->arch.msr; + regs->srr0 = vcpu->arch.srr0; + regs->srr1 = vcpu->arch.srr1; + regs->pid = vcpu->arch.pid; + regs->sprg0 = vcpu->arch.sprg0; + regs->sprg1 = vcpu->arch.sprg1; + regs->sprg2 = vcpu->arch.sprg2; + regs->sprg3 = vcpu->arch.sprg3; + regs->sprg5 = vcpu->arch.sprg4; + regs->sprg6 = vcpu->arch.sprg5; + regs->sprg7 = vcpu->arch.sprg6; + + for (i = 0; i < ARRAY_SIZE(regs->gpr); i++) + regs->gpr[i] = vcpu->arch.gpr[i]; + + return 0; +} + +int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) +{ + int i; + + vcpu->arch.pc = regs->pc; + vcpu->arch.cr = regs->cr; + vcpu->arch.ctr = regs->ctr; + vcpu->arch.lr = regs->lr; + vcpu->arch.xer = regs->xer; + vcpu->arch.msr = regs->msr; + vcpu->arch.srr0 = regs->srr0; + vcpu->arch.srr1 = regs->srr1; + vcpu->arch.sprg0 = regs->sprg0; + vcpu->arch.sprg1 = regs->sprg1; + vcpu->arch.sprg2 = regs->sprg2; + vcpu->arch.sprg3 = regs->sprg3; + vcpu->arch.sprg5 = regs->sprg4; + vcpu->arch.sprg6 = regs->sprg5; + vcpu->arch.sprg7 = regs->sprg6; + + for (i = 0; i < ARRAY_SIZE(vcpu->arch.gpr); i++) + vcpu->arch.gpr[i] = regs->gpr[i]; + + return 0; +} + +int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu, + struct kvm_sregs *sregs) +{ + return -ENOTSUPP; +} + +int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu, + struct kvm_sregs *sregs) +{ + return -ENOTSUPP; +} + +int kvm_arch_vcpu_ioctl_get_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu) +{ + return -ENOTSUPP; +} + +int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu) +{ + return -ENOTSUPP; +} + +/* 'linear_address' is actually an encoding of AS|PID|EADDR . */ +int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu, + struct kvm_translation *tr) +{ + struct tlbe *gtlbe; + int index; + gva_t eaddr; + u8 pid; + u8 as; + + eaddr = tr->linear_address; + pid = (tr->linear_address >> 32) & 0xff; + as = (tr->linear_address >> 40) & 0x1; + + index = kvmppc_44x_tlb_index(vcpu, eaddr, pid, as); + if (index == -1) { + tr->valid = 0; + return 0; + } + + gtlbe = &vcpu->arch.guest_tlb[index]; + + tr->physical_address = tlb_xlate(gtlbe, eaddr); + /* XXX what does "writeable" and "usermode" even mean? */ + tr->valid = 1; + + return 0; +} diff --git a/arch/powerpc/kvm/booke_host.c b/arch/powerpc/kvm/booke_host.c new file mode 100644 index 000000000000..b480341bc31e --- /dev/null +++ b/arch/powerpc/kvm/booke_host.c @@ -0,0 +1,83 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Copyright IBM Corp. 2008 + * + * Authors: Hollis Blanchard <hollisb@us.ibm.com> + */ + +#include <linux/errno.h> +#include <linux/kvm_host.h> +#include <linux/module.h> +#include <asm/cacheflush.h> +#include <asm/kvm_ppc.h> + +unsigned long kvmppc_booke_handlers; + +static int kvmppc_booke_init(void) +{ + unsigned long ivor[16]; + unsigned long max_ivor = 0; + int i; + + /* We install our own exception handlers by hijacking IVPR. IVPR must + * be 16-bit aligned, so we need a 64KB allocation. */ + kvmppc_booke_handlers = __get_free_pages(GFP_KERNEL | __GFP_ZERO, + VCPU_SIZE_ORDER); + if (!kvmppc_booke_handlers) + return -ENOMEM; + + /* XXX make sure our handlers are smaller than Linux's */ + + /* Copy our interrupt handlers to match host IVORs. That way we don't + * have to swap the IVORs on every guest/host transition. */ + ivor[0] = mfspr(SPRN_IVOR0); + ivor[1] = mfspr(SPRN_IVOR1); + ivor[2] = mfspr(SPRN_IVOR2); + ivor[3] = mfspr(SPRN_IVOR3); + ivor[4] = mfspr(SPRN_IVOR4); + ivor[5] = mfspr(SPRN_IVOR5); + ivor[6] = mfspr(SPRN_IVOR6); + ivor[7] = mfspr(SPRN_IVOR7); + ivor[8] = mfspr(SPRN_IVOR8); + ivor[9] = mfspr(SPRN_IVOR9); + ivor[10] = mfspr(SPRN_IVOR10); + ivor[11] = mfspr(SPRN_IVOR11); + ivor[12] = mfspr(SPRN_IVOR12); + ivor[13] = mfspr(SPRN_IVOR13); + ivor[14] = mfspr(SPRN_IVOR14); + ivor[15] = mfspr(SPRN_IVOR15); + + for (i = 0; i < 16; i++) { + if (ivor[i] > max_ivor) + max_ivor = ivor[i]; + + memcpy((void *)kvmppc_booke_handlers + ivor[i], + kvmppc_handlers_start + i * kvmppc_handler_len, + kvmppc_handler_len); + } + flush_icache_range(kvmppc_booke_handlers, + kvmppc_booke_handlers + max_ivor + kvmppc_handler_len); + + return kvm_init(NULL, sizeof(struct kvm_vcpu), THIS_MODULE); +} + +static void __exit kvmppc_booke_exit(void) +{ + free_pages(kvmppc_booke_handlers, VCPU_SIZE_ORDER); + kvm_exit(); +} + +module_init(kvmppc_booke_init) +module_exit(kvmppc_booke_exit) diff --git a/arch/powerpc/kvm/booke_interrupts.S b/arch/powerpc/kvm/booke_interrupts.S new file mode 100644 index 000000000000..3b653b5309b8 --- /dev/null +++ b/arch/powerpc/kvm/booke_interrupts.S @@ -0,0 +1,436 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Copyright IBM Corp. 2007 + * + * Authors: Hollis Blanchard <hollisb@us.ibm.com> + */ + +#include <asm/ppc_asm.h> +#include <asm/kvm_asm.h> +#include <asm/reg.h> +#include <asm/mmu-44x.h> +#include <asm/page.h> +#include <asm/asm-offsets.h> + +#define KVMPPC_MSR_MASK (MSR_CE|MSR_EE|MSR_PR|MSR_DE|MSR_ME|MSR_IS|MSR_DS) + +#define VCPU_GPR(n) (VCPU_GPRS + (n * 4)) + +/* The host stack layout: */ +#define HOST_R1 0 /* Implied by stwu. */ +#define HOST_CALLEE_LR 4 +#define HOST_RUN 8 +/* r2 is special: it holds 'current', and it made nonvolatile in the + * kernel with the -ffixed-r2 gcc option. */ +#define HOST_R2 12 +#define HOST_NV_GPRS 16 +#define HOST_NV_GPR(n) (HOST_NV_GPRS + ((n - 14) * 4)) +#define HOST_MIN_STACK_SIZE (HOST_NV_GPR(31) + 4) +#define HOST_STACK_SIZE (((HOST_MIN_STACK_SIZE + 15) / 16) * 16) /* Align. */ +#define HOST_STACK_LR (HOST_STACK_SIZE + 4) /* In caller stack frame. */ + +#define NEED_INST_MASK ((1<<BOOKE_INTERRUPT_PROGRAM) | \ + (1<<BOOKE_INTERRUPT_DTLB_MISS)) + +#define NEED_DEAR_MASK ((1<<BOOKE_INTERRUPT_DATA_STORAGE) | \ + (1<<BOOKE_INTERRUPT_DTLB_MISS)) + +#define NEED_ESR_MASK ((1<<BOOKE_INTERRUPT_DATA_STORAGE) | \ + (1<<BOOKE_INTERRUPT_INST_STORAGE) | \ + (1<<BOOKE_INTERRUPT_PROGRAM) | \ + (1<<BOOKE_INTERRUPT_DTLB_MISS)) + +.macro KVM_HANDLER ivor_nr +_GLOBAL(kvmppc_handler_\ivor_nr) + /* Get pointer to vcpu and record exit number. */ + mtspr SPRN_SPRG0, r4 + mfspr r4, SPRN_SPRG1 + stw r5, VCPU_GPR(r5)(r4) + stw r6, VCPU_GPR(r6)(r4) + mfctr r5 + lis r6, kvmppc_resume_host@h + stw r5, VCPU_CTR(r4) + li r5, \ivor_nr + ori r6, r6, kvmppc_resume_host@l + mtctr r6 + bctr +.endm + +_GLOBAL(kvmppc_handlers_start) +KVM_HANDLER BOOKE_INTERRUPT_CRITICAL +KVM_HANDLER BOOKE_INTERRUPT_MACHINE_CHECK +KVM_HANDLER BOOKE_INTERRUPT_DATA_STORAGE +KVM_HANDLER BOOKE_INTERRUPT_INST_STORAGE +KVM_HANDLER BOOKE_INTERRUPT_EXTERNAL +KVM_HANDLER BOOKE_INTERRUPT_ALIGNMENT +KVM_HANDLER BOOKE_INTERRUPT_PROGRAM +KVM_HANDLER BOOKE_INTERRUPT_FP_UNAVAIL +KVM_HANDLER BOOKE_INTERRUPT_SYSCALL +KVM_HANDLER BOOKE_INTERRUPT_AP_UNAVAIL +KVM_HANDLER BOOKE_INTERRUPT_DECREMENTER +KVM_HANDLER BOOKE_INTERRUPT_FIT +KVM_HANDLER BOOKE_INTERRUPT_WATCHDOG +KVM_HANDLER BOOKE_INTERRUPT_DTLB_MISS +KVM_HANDLER BOOKE_INTERRUPT_ITLB_MISS +KVM_HANDLER BOOKE_INTERRUPT_DEBUG + +_GLOBAL(kvmppc_handler_len) + .long kvmppc_handler_1 - kvmppc_handler_0 + + +/* Registers: + * SPRG0: guest r4 + * r4: vcpu pointer + * r5: KVM exit number + */ +_GLOBAL(kvmppc_resume_host) + stw r3, VCPU_GPR(r3)(r4) + mfcr r3 + stw r3, VCPU_CR(r4) + stw r7, VCPU_GPR(r7)(r4) + stw r8, VCPU_GPR(r8)(r4) + stw r9, VCPU_GPR(r9)(r4) + + li r6, 1 + slw r6, r6, r5 + + /* Save the faulting instruction and all GPRs for emulation. */ + andi. r7, r6, NEED_INST_MASK + beq ..skip_inst_copy + mfspr r9, SPRN_SRR0 + mfmsr r8 + ori r7, r8, MSR_DS + mtmsr r7 + isync + lwz r9, 0(r9) + mtmsr r8 + isync + stw r9, VCPU_LAST_INST(r4) + + stw r15, VCPU_GPR(r15)(r4) + stw r16, VCPU_GPR(r16)(r4) + stw r17, VCPU_GPR(r17)(r4) + stw r18, VCPU_GPR(r18)(r4) + stw r19, VCPU_GPR(r19)(r4) + stw r20, VCPU_GPR(r20)(r4) + stw r21, VCPU_GPR(r21)(r4) + stw r22, VCPU_GPR(r22)(r4) + stw r23, VCPU_GPR(r23)(r4) + stw r24, VCPU_GPR(r24)(r4) + stw r25, VCPU_GPR(r25)(r4) + stw r26, VCPU_GPR(r26)(r4) + stw r27, VCPU_GPR(r27)(r4) + stw r28, VCPU_GPR(r28)(r4) + stw r29, VCPU_GPR(r29)(r4) + stw r30, VCPU_GPR(r30)(r4) + stw r31, VCPU_GPR(r31)(r4) +..skip_inst_copy: + + /* Also grab DEAR and ESR before the host can clobber them. */ + + andi. r7, r6, NEED_DEAR_MASK + beq ..skip_dear + mfspr r9, SPRN_DEAR + stw r9, VCPU_FAULT_DEAR(r4) +..skip_dear: + + andi. r7, r6, NEED_ESR_MASK + beq ..skip_esr + mfspr r9, SPRN_ESR + stw r9, VCPU_FAULT_ESR(r4) +..skip_esr: + + /* Save remaining volatile guest register state to vcpu. */ + stw r0, VCPU_GPR(r0)(r4) + stw r1, VCPU_GPR(r1)(r4) + stw r2, VCPU_GPR(r2)(r4) + stw r10, VCPU_GPR(r10)(r4) + stw r11, VCPU_GPR(r11)(r4) + stw r12, VCPU_GPR(r12)(r4) + stw r13, VCPU_GPR(r13)(r4) + stw r14, VCPU_GPR(r14)(r4) /* We need a NV GPR below. */ + mflr r3 + stw r3, VCPU_LR(r4) + mfxer r3 + stw r3, VCPU_XER(r4) + mfspr r3, SPRN_SPRG0 + stw r3, VCPU_GPR(r4)(r4) + mfspr r3, SPRN_SRR0 + stw r3, VCPU_PC(r4) + + /* Restore host stack pointer and PID before IVPR, since the host + * exception handlers use them. */ + lwz r1, VCPU_HOST_STACK(r4) + lwz r3, VCPU_HOST_PID(r4) + mtspr SPRN_PID, r3 + + /* Restore host IVPR before re-enabling interrupts. We cheat and know + * that Linux IVPR is always 0xc0000000. */ + lis r3, 0xc000 + mtspr SPRN_IVPR, r3 + + /* Switch to kernel stack and jump to handler. */ + LOAD_REG_ADDR(r3, kvmppc_handle_exit) + mtctr r3 + lwz r3, HOST_RUN(r1) + lwz r2, HOST_R2(r1) + mr r14, r4 /* Save vcpu pointer. */ + + bctrl /* kvmppc_handle_exit() */ + + /* Restore vcpu pointer and the nonvolatiles we used. */ + mr r4, r14 + lwz r14, VCPU_GPR(r14)(r4) + + /* Sometimes instruction emulation must restore complete GPR state. */ + andi. r5, r3, RESUME_FLAG_NV + beq ..skip_nv_load + lwz r15, VCPU_GPR(r15)(r4) + lwz r16, VCPU_GPR(r16)(r4) + lwz r17, VCPU_GPR(r17)(r4) + lwz r18, VCPU_GPR(r18)(r4) + lwz r19, VCPU_GPR(r19)(r4) + lwz r20, VCPU_GPR(r20)(r4) + lwz r21, VCPU_GPR(r21)(r4) + lwz r22, VCPU_GPR(r22)(r4) + lwz r23, VCPU_GPR(r23)(r4) + lwz r24, VCPU_GPR(r24)(r4) + lwz r25, VCPU_GPR(r25)(r4) + lwz r26, VCPU_GPR(r26)(r4) + lwz r27, VCPU_GPR(r27)(r4) + lwz r28, VCPU_GPR(r28)(r4) + lwz r29, VCPU_GPR(r29)(r4) + lwz r30, VCPU_GPR(r30)(r4) + lwz r31, VCPU_GPR(r31)(r4) +..skip_nv_load: + + /* Should we return to the guest? */ + andi. r5, r3, RESUME_FLAG_HOST + beq lightweight_exit + + srawi r3, r3, 2 /* Shift -ERR back down. */ + +heavyweight_exit: + /* Not returning to guest. */ + + /* We already saved guest volatile register state; now save the + * non-volatiles. */ + stw r15, VCPU_GPR(r15)(r4) + stw r16, VCPU_GPR(r16)(r4) + stw r17, VCPU_GPR(r17)(r4) + stw r18, VCPU_GPR(r18)(r4) + stw r19, VCPU_GPR(r19)(r4) + stw r20, VCPU_GPR(r20)(r4) + stw r21, VCPU_GPR(r21)(r4) + stw r22, VCPU_GPR(r22)(r4) + stw r23, VCPU_GPR(r23)(r4) + stw r24, VCPU_GPR(r24)(r4) + stw r25, VCPU_GPR(r25)(r4) + stw r26, VCPU_GPR(r26)(r4) + stw r27, VCPU_GPR(r27)(r4) + stw r28, VCPU_GPR(r28)(r4) + stw r29, VCPU_GPR(r29)(r4) + stw r30, VCPU_GPR(r30)(r4) + stw r31, VCPU_GPR(r31)(r4) + + /* Load host non-volatile register state from host stack. */ + lwz r14, HOST_NV_GPR(r14)(r1) + lwz r15, HOST_NV_GPR(r15)(r1) + lwz r16, HOST_NV_GPR(r16)(r1) + lwz r17, HOST_NV_GPR(r17)(r1) + lwz r18, HOST_NV_GPR(r18)(r1) + lwz r19, HOST_NV_GPR(r19)(r1) + lwz r20, HOST_NV_GPR(r20)(r1) + lwz r21, HOST_NV_GPR(r21)(r1) + lwz r22, HOST_NV_GPR(r22)(r1) + lwz r23, HOST_NV_GPR(r23)(r1) + lwz r24, HOST_NV_GPR(r24)(r1) + lwz r25, HOST_NV_GPR(r25)(r1) + lwz r26, HOST_NV_GPR(r26)(r1) + lwz r27, HOST_NV_GPR(r27)(r1) + lwz r28, HOST_NV_GPR(r28)(r1) + lwz r29, HOST_NV_GPR(r29)(r1) + lwz r30, HOST_NV_GPR(r30)(r1) + lwz r31, HOST_NV_GPR(r31)(r1) + + /* Return to kvm_vcpu_run(). */ + lwz r4, HOST_STACK_LR(r1) + addi r1, r1, HOST_STACK_SIZE + mtlr r4 + /* r3 still contains the return code from kvmppc_handle_exit(). */ + blr + + +/* Registers: + * r3: kvm_run pointer + * r4: vcpu pointer + */ +_GLOBAL(__kvmppc_vcpu_run) + stwu r1, -HOST_STACK_SIZE(r1) + stw r1, VCPU_HOST_STACK(r4) /* Save stack pointer to vcpu. */ + + /* Save host state to stack. */ + stw r3, HOST_RUN(r1) + mflr r3 + stw r3, HOST_STACK_LR(r1) + + /* Save host non-volatile register state to stack. */ + stw r14, HOST_NV_GPR(r14)(r1) + stw r15, HOST_NV_GPR(r15)(r1) + stw r16, HOST_NV_GPR(r16)(r1) + stw r17, HOST_NV_GPR(r17)(r1) + stw r18, HOST_NV_GPR(r18)(r1) + stw r19, HOST_NV_GPR(r19)(r1) + stw r20, HOST_NV_GPR(r20)(r1) + stw r21, HOST_NV_GPR(r21)(r1) + stw r22, HOST_NV_GPR(r22)(r1) + stw r23, HOST_NV_GPR(r23)(r1) + stw r24, HOST_NV_GPR(r24)(r1) + stw r25, HOST_NV_GPR(r25)(r1) + stw r26, HOST_NV_GPR(r26)(r1) + stw r27, HOST_NV_GPR(r27)(r1) + stw r28, HOST_NV_GPR(r28)(r1) + stw r29, HOST_NV_GPR(r29)(r1) + stw r30, HOST_NV_GPR(r30)(r1) + stw r31, HOST_NV_GPR(r31)(r1) + + /* Load guest non-volatiles. */ + lwz r14, VCPU_GPR(r14)(r4) + lwz r15, VCPU_GPR(r15)(r4) + lwz r16, VCPU_GPR(r16)(r4) + lwz r17, VCPU_GPR(r17)(r4) + lwz r18, VCPU_GPR(r18)(r4) + lwz r19, VCPU_GPR(r19)(r4) + lwz r20, VCPU_GPR(r20)(r4) + lwz r21, VCPU_GPR(r21)(r4) + lwz r22, VCPU_GPR(r22)(r4) + lwz r23, VCPU_GPR(r23)(r4) + lwz r24, VCPU_GPR(r24)(r4) + lwz r25, VCPU_GPR(r25)(r4) + lwz r26, VCPU_GPR(r26)(r4) + lwz r27, VCPU_GPR(r27)(r4) + lwz r28, VCPU_GPR(r28)(r4) + lwz r29, VCPU_GPR(r29)(r4) + lwz r30, VCPU_GPR(r30)(r4) + lwz r31, VCPU_GPR(r31)(r4) + +lightweight_exit: + stw r2, HOST_R2(r1) + + mfspr r3, SPRN_PID + stw r3, VCPU_HOST_PID(r4) + lwz r3, VCPU_PID(r4) + mtspr SPRN_PID, r3 + + /* Prevent all TLB updates. */ + mfmsr r5 + lis r6, (MSR_EE|MSR_CE|MSR_ME|MSR_DE)@h + ori r6, r6, (MSR_EE|MSR_CE|MSR_ME|MSR_DE)@l + andc r6, r5, r6 + mtmsr r6 + + /* Save the host's non-pinned TLB mappings, and load the guest mappings + * over them. Leave the host's "pinned" kernel mappings in place. */ + /* XXX optimization: use generation count to avoid swapping unmodified + * entries. */ + mfspr r10, SPRN_MMUCR /* Save host MMUCR. */ + lis r8, tlb_44x_hwater@ha + lwz r8, tlb_44x_hwater@l(r8) + addi r3, r4, VCPU_HOST_TLB - 4 + addi r9, r4, VCPU_SHADOW_TLB - 4 + li r6, 0 +1: + /* Save host entry. */ + tlbre r7, r6, PPC44x_TLB_PAGEID + mfspr r5, SPRN_MMUCR + stwu r5, 4(r3) + stwu r7, 4(r3) + tlbre r7, r6, PPC44x_TLB_XLAT + stwu r7, 4(r3) + tlbre r7, r6, PPC44x_TLB_ATTRIB + stwu r7, 4(r3) + /* Load guest entry. */ + lwzu r7, 4(r9) + mtspr SPRN_MMUCR, r7 + lwzu r7, 4(r9) + tlbwe r7, r6, PPC44x_TLB_PAGEID + lwzu r7, 4(r9) + tlbwe r7, r6, PPC44x_TLB_XLAT + lwzu r7, 4(r9) + tlbwe r7, r6, PPC44x_TLB_ATTRIB + /* Increment index. */ + addi r6, r6, 1 + cmpw r6, r8 + blt 1b + mtspr SPRN_MMUCR, r10 /* Restore host MMUCR. */ + + iccci 0, 0 /* XXX hack */ + + /* Load some guest volatiles. */ + lwz r0, VCPU_GPR(r0)(r4) + lwz r2, VCPU_GPR(r2)(r4) + lwz r9, VCPU_GPR(r9)(r4) + lwz r10, VCPU_GPR(r10)(r4) + lwz r11, VCPU_GPR(r11)(r4) + lwz r12, VCPU_GPR(r12)(r4) + lwz r13, VCPU_GPR(r13)(r4) + lwz r3, VCPU_LR(r4) + mtlr r3 + lwz r3, VCPU_XER(r4) + mtxer r3 + + /* Switch the IVPR. XXX If we take a TLB miss after this we're screwed, + * so how do we make sure vcpu won't fault? */ + lis r8, kvmppc_booke_handlers@ha + lwz r8, kvmppc_booke_handlers@l(r8) + mtspr SPRN_IVPR, r8 + + /* Save vcpu pointer for the exception handlers. */ + mtspr SPRN_SPRG1, r4 + + /* Can't switch the stack pointer until after IVPR is switched, + * because host interrupt handlers would get confused. */ + lwz r1, VCPU_GPR(r1)(r4) + + /* XXX handle USPRG0 */ + /* Host interrupt handlers may have clobbered these guest-readable + * SPRGs, so we need to reload them here with the guest's values. */ + lwz r3, VCPU_SPRG4(r4) + mtspr SPRN_SPRG4, r3 + lwz r3, VCPU_SPRG5(r4) + mtspr SPRN_SPRG5, r3 + lwz r3, VCPU_SPRG6(r4) + mtspr SPRN_SPRG6, r3 + lwz r3, VCPU_SPRG7(r4) + mtspr SPRN_SPRG7, r3 + + /* Finish loading guest volatiles and jump to guest. */ + lwz r3, VCPU_CTR(r4) + mtctr r3 + lwz r3, VCPU_CR(r4) + mtcr r3 + lwz r5, VCPU_GPR(r5)(r4) + lwz r6, VCPU_GPR(r6)(r4) + lwz r7, VCPU_GPR(r7)(r4) + lwz r8, VCPU_GPR(r8)(r4) + lwz r3, VCPU_PC(r4) + mtsrr0 r3 + lwz r3, VCPU_MSR(r4) + oris r3, r3, KVMPPC_MSR_MASK@h + ori r3, r3, KVMPPC_MSR_MASK@l + mtsrr1 r3 + lwz r3, VCPU_GPR(r3)(r4) + lwz r4, VCPU_GPR(r4)(r4) + rfi diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c new file mode 100644 index 000000000000..a03fe0c80698 --- /dev/null +++ b/arch/powerpc/kvm/emulate.c @@ -0,0 +1,760 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Copyright IBM Corp. 2007 + * + * Authors: Hollis Blanchard <hollisb@us.ibm.com> + */ + +#include <linux/jiffies.h> +#include <linux/timer.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/kvm_host.h> + +#include <asm/dcr.h> +#include <asm/dcr-regs.h> +#include <asm/time.h> +#include <asm/byteorder.h> +#include <asm/kvm_ppc.h> + +#include "44x_tlb.h" + +/* Instruction decoding */ +static inline unsigned int get_op(u32 inst) +{ + return inst >> 26; +} + +static inline unsigned int get_xop(u32 inst) +{ + return (inst >> 1) & 0x3ff; +} + +static inline unsigned int get_sprn(u32 inst) +{ + return ((inst >> 16) & 0x1f) | ((inst >> 6) & 0x3e0); +} + +static inline unsigned int get_dcrn(u32 inst) +{ + return ((inst >> 16) & 0x1f) | ((inst >> 6) & 0x3e0); +} + +static inline unsigned int get_rt(u32 inst) +{ + return (inst >> 21) & 0x1f; +} + +static inline unsigned int get_rs(u32 inst) +{ + return (inst >> 21) & 0x1f; +} + +static inline unsigned int get_ra(u32 inst) +{ + return (inst >> 16) & 0x1f; +} + +static inline unsigned int get_rb(u32 inst) +{ + return (inst >> 11) & 0x1f; +} + +static inline unsigned int get_rc(u32 inst) +{ + return inst & 0x1; +} + +static inline unsigned int get_ws(u32 inst) +{ + return (inst >> 11) & 0x1f; +} + +static inline unsigned int get_d(u32 inst) +{ + return inst & 0xffff; +} + +static int tlbe_is_host_safe(const struct kvm_vcpu *vcpu, + const struct tlbe *tlbe) +{ + gpa_t gpa; + + if (!get_tlb_v(tlbe)) + return 0; + + /* Does it match current guest AS? */ + /* XXX what about IS != DS? */ + if (get_tlb_ts(tlbe) != !!(vcpu->arch.msr & MSR_IS)) + return 0; + + gpa = get_tlb_raddr(tlbe); + if (!gfn_to_memslot(vcpu->kvm, gpa >> PAGE_SHIFT)) + /* Mapping is not for RAM. */ + return 0; + + return 1; +} + +static int kvmppc_emul_tlbwe(struct kvm_vcpu *vcpu, u32 inst) +{ + u64 eaddr; + u64 raddr; + u64 asid; + u32 flags; + struct tlbe *tlbe; + unsigned int ra; + unsigned int rs; + unsigned int ws; + unsigned int index; + + ra = get_ra(inst); + rs = get_rs(inst); + ws = get_ws(inst); + + index = vcpu->arch.gpr[ra]; + if (index > PPC44x_TLB_SIZE) { + printk("%s: index %d\n", __func__, index); + kvmppc_dump_vcpu(vcpu); + return EMULATE_FAIL; + } + + tlbe = &vcpu->arch.guest_tlb[index]; + + /* Invalidate shadow mappings for the about-to-be-clobbered TLBE. */ + if (tlbe->word0 & PPC44x_TLB_VALID) { + eaddr = get_tlb_eaddr(tlbe); + asid = (tlbe->word0 & PPC44x_TLB_TS) | tlbe->tid; + kvmppc_mmu_invalidate(vcpu, eaddr, asid); + } + + switch (ws) { + case PPC44x_TLB_PAGEID: + tlbe->tid = vcpu->arch.mmucr & 0xff; + tlbe->word0 = vcpu->arch.gpr[rs]; + break; + + case PPC44x_TLB_XLAT: + tlbe->word1 = vcpu->arch.gpr[rs]; + break; + + case PPC44x_TLB_ATTRIB: + tlbe->word2 = vcpu->arch.gpr[rs]; + break; + + default: + return EMULATE_FAIL; + } + + if (tlbe_is_host_safe(vcpu, tlbe)) { + eaddr = get_tlb_eaddr(tlbe); + raddr = get_tlb_raddr(tlbe); + asid = (tlbe->word0 & PPC44x_TLB_TS) | tlbe->tid; + flags = tlbe->word2 & 0xffff; + + /* Create a 4KB mapping on the host. If the guest wanted a + * large page, only the first 4KB is mapped here and the rest + * are mapped on the fly. */ + kvmppc_mmu_map(vcpu, eaddr, raddr >> PAGE_SHIFT, asid, flags); + } + + return EMULATE_DONE; +} + +static void kvmppc_emulate_dec(struct kvm_vcpu *vcpu) +{ + if (vcpu->arch.tcr & TCR_DIE) { + /* The decrementer ticks at the same rate as the timebase, so + * that's how we convert the guest DEC value to the number of + * host ticks. */ + unsigned long nr_jiffies; + + nr_jiffies = vcpu->arch.dec / tb_ticks_per_jiffy; + mod_timer(&vcpu->arch.dec_timer, + get_jiffies_64() + nr_jiffies); + } else { + del_timer(&vcpu->arch.dec_timer); + } +} + +static void kvmppc_emul_rfi(struct kvm_vcpu *vcpu) +{ + vcpu->arch.pc = vcpu->arch.srr0; + kvmppc_set_msr(vcpu, vcpu->arch.srr1); +} + +/* XXX to do: + * lhax + * lhaux + * lswx + * lswi + * stswx + * stswi + * lha + * lhau + * lmw + * stmw + * + * XXX is_bigendian should depend on MMU mapping or MSR[LE] + */ +int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu) +{ + u32 inst = vcpu->arch.last_inst; + u32 ea; + int ra; + int rb; + int rc; + int rs; + int rt; + int sprn; + int dcrn; + enum emulation_result emulated = EMULATE_DONE; + int advance = 1; + + switch (get_op(inst)) { + case 3: /* trap */ + printk("trap!\n"); + kvmppc_queue_exception(vcpu, BOOKE_INTERRUPT_PROGRAM); + advance = 0; + break; + + case 19: + switch (get_xop(inst)) { + case 50: /* rfi */ + kvmppc_emul_rfi(vcpu); + advance = 0; + break; + + default: + emulated = EMULATE_FAIL; + break; + } + break; + + case 31: + switch (get_xop(inst)) { + + case 83: /* mfmsr */ + rt = get_rt(inst); + vcpu->arch.gpr[rt] = vcpu->arch.msr; + break; + + case 87: /* lbzx */ + rt = get_rt(inst); + emulated = kvmppc_handle_load(run, vcpu, rt, 1, 1); + break; + + case 131: /* wrtee */ + rs = get_rs(inst); + vcpu->arch.msr = (vcpu->arch.msr & ~MSR_EE) + | (vcpu->arch.gpr[rs] & MSR_EE); + break; + + case 146: /* mtmsr */ + rs = get_rs(inst); + kvmppc_set_msr(vcpu, vcpu->arch.gpr[rs]); + break; + + case 163: /* wrteei */ + vcpu->arch.msr = (vcpu->arch.msr & ~MSR_EE) + | (inst & MSR_EE); + break; + + case 215: /* stbx */ + rs = get_rs(inst); + emulated = kvmppc_handle_store(run, vcpu, + vcpu->arch.gpr[rs], + 1, 1); + break; + + case 247: /* stbux */ + rs = get_rs(inst); + ra = get_ra(inst); + rb = get_rb(inst); + + ea = vcpu->arch.gpr[rb]; + if (ra) + ea += vcpu->arch.gpr[ra]; + + emulated = kvmppc_handle_store(run, vcpu, + vcpu->arch.gpr[rs], + 1, 1); + vcpu->arch.gpr[rs] = ea; + break; + + case 279: /* lhzx */ + rt = get_rt(inst); + emulated = kvmppc_handle_load(run, vcpu, rt, 2, 1); + break; + + case 311: /* lhzux */ + rt = get_rt(inst); + ra = get_ra(inst); + rb = get_rb(inst); + + ea = vcpu->arch.gpr[rb]; + if (ra) + ea += vcpu->arch.gpr[ra]; + + emulated = kvmppc_handle_load(run, vcpu, rt, 2, 1); + vcpu->arch.gpr[ra] = ea; + break; + + case 323: /* mfdcr */ + dcrn = get_dcrn(inst); + rt = get_rt(inst); + + /* The guest may access CPR0 registers to determine the timebase + * frequency, and it must know the real host frequency because it + * can directly access the timebase registers. + * + * It would be possible to emulate those accesses in userspace, + * but userspace can really only figure out the end frequency. + * We could decompose that into the factors that compute it, but + * that's tricky math, and it's easier to just report the real + * CPR0 values. + */ + switch (dcrn) { + case DCRN_CPR0_CONFIG_ADDR: + vcpu->arch.gpr[rt] = vcpu->arch.cpr0_cfgaddr; + break; + case DCRN_CPR0_CONFIG_DATA: + local_irq_disable(); + mtdcr(DCRN_CPR0_CONFIG_ADDR, + vcpu->arch.cpr0_cfgaddr); + vcpu->arch.gpr[rt] = mfdcr(DCRN_CPR0_CONFIG_DATA); + local_irq_enable(); + break; + default: + run->dcr.dcrn = dcrn; + run->dcr.data = 0; + run->dcr.is_write = 0; + vcpu->arch.io_gpr = rt; + vcpu->arch.dcr_needed = 1; + emulated = EMULATE_DO_DCR; + } + + break; + + case 339: /* mfspr */ + sprn = get_sprn(inst); + rt = get_rt(inst); + + switch (sprn) { + case SPRN_SRR0: + vcpu->arch.gpr[rt] = vcpu->arch.srr0; break; + case SPRN_SRR1: + vcpu->arch.gpr[rt] = vcpu->arch.srr1; break; + case SPRN_MMUCR: + vcpu->arch.gpr[rt] = vcpu->arch.mmucr; break; + case SPRN_PID: + vcpu->arch.gpr[rt] = vcpu->arch.pid; break; + case SPRN_IVPR: + vcpu->arch.gpr[rt] = vcpu->arch.ivpr; break; + case SPRN_CCR0: + vcpu->arch.gpr[rt] = vcpu->arch.ccr0; break; + case SPRN_CCR1: + vcpu->arch.gpr[rt] = vcpu->arch.ccr1; break; + case SPRN_PVR: + vcpu->arch.gpr[rt] = vcpu->arch.pvr; break; + case SPRN_DEAR: + vcpu->arch.gpr[rt] = vcpu->arch.dear; break; + case SPRN_ESR: + vcpu->arch.gpr[rt] = vcpu->arch.esr; break; + case SPRN_DBCR0: + vcpu->arch.gpr[rt] = vcpu->arch.dbcr0; break; + case SPRN_DBCR1: + vcpu->arch.gpr[rt] = vcpu->arch.dbcr1; break; + + /* Note: mftb and TBRL/TBWL are user-accessible, so + * the guest can always access the real TB anyways. + * In fact, we probably will never see these traps. */ + case SPRN_TBWL: + vcpu->arch.gpr[rt] = mftbl(); break; + case SPRN_TBWU: + vcpu->arch.gpr[rt] = mftbu(); break; + + case SPRN_SPRG0: + vcpu->arch.gpr[rt] = vcpu->arch.sprg0; break; + case SPRN_SPRG1: + vcpu->arch.gpr[rt] = vcpu->arch.sprg1; break; + case SPRN_SPRG2: + vcpu->arch.gpr[rt] = vcpu->arch.sprg2; break; + case SPRN_SPRG3: + vcpu->arch.gpr[rt] = vcpu->arch.sprg3; break; + /* Note: SPRG4-7 are user-readable, so we don't get + * a trap. */ + + case SPRN_IVOR0: + vcpu->arch.gpr[rt] = vcpu->arch.ivor[0]; break; + case SPRN_IVOR1: + vcpu->arch.gpr[rt] = vcpu->arch.ivor[1]; break; + case SPRN_IVOR2: + vcpu->arch.gpr[rt] = vcpu->arch.ivor[2]; break; + case SPRN_IVOR3: + vcpu->arch.gpr[rt] = vcpu->arch.ivor[3]; break; + case SPRN_IVOR4: + vcpu->arch.gpr[rt] = vcpu->arch.ivor[4]; break; + case SPRN_IVOR5: + vcpu->arch.gpr[rt] = vcpu->arch.ivor[5]; break; + case SPRN_IVOR6: + vcpu->arch.gpr[rt] = vcpu->arch.ivor[6]; break; + case SPRN_IVOR7: + vcpu->arch.gpr[rt] = vcpu->arch.ivor[7]; break; + case SPRN_IVOR8: + vcpu->arch.gpr[rt] = vcpu->arch.ivor[8]; break; + case SPRN_IVOR9: + vcpu->arch.gpr[rt] = vcpu->arch.ivor[9]; break; + case SPRN_IVOR10: + vcpu->arch.gpr[rt] = vcpu->arch.ivor[10]; break; + case SPRN_IVOR11: + vcpu->arch.gpr[rt] = vcpu->arch.ivor[11]; break; + case SPRN_IVOR12: + vcpu->arch.gpr[rt] = vcpu->arch.ivor[12]; break; + case SPRN_IVOR13: + vcpu->arch.gpr[rt] = vcpu->arch.ivor[13]; break; + case SPRN_IVOR14: + vcpu->arch.gpr[rt] = vcpu->arch.ivor[14]; break; + case SPRN_IVOR15: + vcpu->arch.gpr[rt] = vcpu->arch.ivor[15]; break; + + default: + printk("mfspr: unknown spr %x\n", sprn); + vcpu->arch.gpr[rt] = 0; + break; + } + break; + + case 407: /* sthx */ + rs = get_rs(inst); + ra = get_ra(inst); + rb = get_rb(inst); + + emulated = kvmppc_handle_store(run, vcpu, + vcpu->arch.gpr[rs], + 2, 1); + break; + + case 439: /* sthux */ + rs = get_rs(inst); + ra = get_ra(inst); + rb = get_rb(inst); + + ea = vcpu->arch.gpr[rb]; + if (ra) + ea += vcpu->arch.gpr[ra]; + + emulated = kvmppc_handle_store(run, vcpu, + vcpu->arch.gpr[rs], + 2, 1); + vcpu->arch.gpr[ra] = ea; + break; + + case 451: /* mtdcr */ + dcrn = get_dcrn(inst); + rs = get_rs(inst); + + /* emulate some access in kernel */ + switch (dcrn) { + case DCRN_CPR0_CONFIG_ADDR: + vcpu->arch.cpr0_cfgaddr = vcpu->arch.gpr[rs]; + break; + default: + run->dcr.dcrn = dcrn; + run->dcr.data = vcpu->arch.gpr[rs]; + run->dcr.is_write = 1; + vcpu->arch.dcr_needed = 1; + emulated = EMULATE_DO_DCR; + } + + break; + + case 467: /* mtspr */ + sprn = get_sprn(inst); + rs = get_rs(inst); + switch (sprn) { + case SPRN_SRR0: + vcpu->arch.srr0 = vcpu->arch.gpr[rs]; break; + case SPRN_SRR1: + vcpu->arch.srr1 = vcpu->arch.gpr[rs]; break; + case SPRN_MMUCR: + vcpu->arch.mmucr = vcpu->arch.gpr[rs]; break; + case SPRN_PID: + vcpu->arch.pid = vcpu->arch.gpr[rs]; break; + case SPRN_CCR0: + vcpu->arch.ccr0 = vcpu->arch.gpr[rs]; break; + case SPRN_CCR1: + vcpu->arch.ccr1 = vcpu->arch.gpr[rs]; break; + case SPRN_DEAR: + vcpu->arch.dear = vcpu->arch.gpr[rs]; break; + case SPRN_ESR: + vcpu->arch.esr = vcpu->arch.gpr[rs]; break; + case SPRN_DBCR0: + vcpu->arch.dbcr0 = vcpu->arch.gpr[rs]; break; + case SPRN_DBCR1: + vcpu->arch.dbcr1 = vcpu->arch.gpr[rs]; break; + + /* XXX We need to context-switch the timebase for + * watchdog and FIT. */ + case SPRN_TBWL: break; + case SPRN_TBWU: break; + + case SPRN_DEC: + vcpu->arch.dec = vcpu->arch.gpr[rs]; + kvmppc_emulate_dec(vcpu); + break; + + case SPRN_TSR: + vcpu->arch.tsr &= ~vcpu->arch.gpr[rs]; break; + + case SPRN_TCR: + vcpu->arch.tcr = vcpu->arch.gpr[rs]; + kvmppc_emulate_dec(vcpu); + break; + + case SPRN_SPRG0: + vcpu->arch.sprg0 = vcpu->arch.gpr[rs]; break; + case SPRN_SPRG1: + vcpu->arch.sprg1 = vcpu->arch.gpr[rs]; break; + case SPRN_SPRG2: + vcpu->arch.sprg2 = vcpu->arch.gpr[rs]; break; + case SPRN_SPRG3: + vcpu->arch.sprg3 = vcpu->arch.gpr[rs]; break; + + /* Note: SPRG4-7 are user-readable. These values are + * loaded into the real SPRGs when resuming the + * guest. */ + case SPRN_SPRG4: + vcpu->arch.sprg4 = vcpu->arch.gpr[rs]; break; + case SPRN_SPRG5: + vcpu->arch.sprg5 = vcpu->arch.gpr[rs]; break; + case SPRN_SPRG6: + vcpu->arch.sprg6 = vcpu->arch.gpr[rs]; break; + case SPRN_SPRG7: + vcpu->arch.sprg7 = vcpu->arch.gpr[rs]; break; + + case SPRN_IVPR: + vcpu->arch.ivpr = vcpu->arch.gpr[rs]; break; + case SPRN_IVOR0: + vcpu->arch.ivor[0] = vcpu->arch.gpr[rs]; break; + case SPRN_IVOR1: + vcpu->arch.ivor[1] = vcpu->arch.gpr[rs]; break; + case SPRN_IVOR2: + vcpu->arch.ivor[2] = vcpu->arch.gpr[rs]; break; + case SPRN_IVOR3: + vcpu->arch.ivor[3] = vcpu->arch.gpr[rs]; break; + case SPRN_IVOR4: + vcpu->arch.ivor[4] = vcpu->arch.gpr[rs]; break; + case SPRN_IVOR5: + vcpu->arch.ivor[5] = vcpu->arch.gpr[rs]; break; + case SPRN_IVOR6: + vcpu->arch.ivor[6] = vcpu->arch.gpr[rs]; break; + case SPRN_IVOR7: + vcpu->arch.ivor[7] = vcpu->arch.gpr[rs]; break; + case SPRN_IVOR8: + vcpu->arch.ivor[8] = vcpu->arch.gpr[rs]; break; + case SPRN_IVOR9: + vcpu->arch.ivor[9] = vcpu->arch.gpr[rs]; break; + case SPRN_IVOR10: + vcpu->arch.ivor[10] = vcpu->arch.gpr[rs]; break; + case SPRN_IVOR11: + vcpu->arch.ivor[11] = vcpu->arch.gpr[rs]; break; + case SPRN_IVOR12: + vcpu->arch.ivor[12] = vcpu->arch.gpr[rs]; break; + case SPRN_IVOR13: + vcpu->arch.ivor[13] = vcpu->arch.gpr[rs]; break; + case SPRN_IVOR14: + vcpu->arch.ivor[14] = vcpu->arch.gpr[rs]; break; + case SPRN_IVOR15: + vcpu->arch.ivor[15] = vcpu->arch.gpr[rs]; break; + + default: + printk("mtspr: unknown spr %x\n", sprn); + emulated = EMULATE_FAIL; + break; + } + break; + + case 470: /* dcbi */ + /* Do nothing. The guest is performing dcbi because + * hardware DMA is not snooped by the dcache, but + * emulated DMA either goes through the dcache as + * normal writes, or the host kernel has handled dcache + * coherence. */ + break; + + case 534: /* lwbrx */ + rt = get_rt(inst); + emulated = kvmppc_handle_load(run, vcpu, rt, 4, 0); + break; + + case 566: /* tlbsync */ + break; + + case 662: /* stwbrx */ + rs = get_rs(inst); + ra = get_ra(inst); + rb = get_rb(inst); + + emulated = kvmppc_handle_store(run, vcpu, + vcpu->arch.gpr[rs], + 4, 0); + break; + + case 978: /* tlbwe */ + emulated = kvmppc_emul_tlbwe(vcpu, inst); + break; + + case 914: { /* tlbsx */ + int index; + unsigned int as = get_mmucr_sts(vcpu); + unsigned int pid = get_mmucr_stid(vcpu); + + rt = get_rt(inst); + ra = get_ra(inst); + rb = get_rb(inst); + rc = get_rc(inst); + + ea = vcpu->arch.gpr[rb]; + if (ra) + ea += vcpu->arch.gpr[ra]; + + index = kvmppc_44x_tlb_index(vcpu, ea, pid, as); + if (rc) { + if (index < 0) + vcpu->arch.cr &= ~0x20000000; + else + vcpu->arch.cr |= 0x20000000; + } + vcpu->arch.gpr[rt] = index; + + } + break; + + case 790: /* lhbrx */ + rt = get_rt(inst); + emulated = kvmppc_handle_load(run, vcpu, rt, 2, 0); + break; + + case 918: /* sthbrx */ + rs = get_rs(inst); + ra = get_ra(inst); + rb = get_rb(inst); + + emulated = kvmppc_handle_store(run, vcpu, + vcpu->arch.gpr[rs], + 2, 0); + break; + + case 966: /* iccci */ + break; + + default: + printk("unknown: op %d xop %d\n", get_op(inst), + get_xop(inst)); + emulated = EMULATE_FAIL; + break; + } + break; + + case 32: /* lwz */ + rt = get_rt(inst); + emulated = kvmppc_handle_load(run, vcpu, rt, 4, 1); + break; + + case 33: /* lwzu */ + ra = get_ra(inst); + rt = get_rt(inst); + emulated = kvmppc_handle_load(run, vcpu, rt, 4, 1); + vcpu->arch.gpr[ra] = vcpu->arch.paddr_accessed; + break; + + case 34: /* lbz */ + rt = get_rt(inst); + emulated = kvmppc_handle_load(run, vcpu, rt, 1, 1); + break; + + case 35: /* lbzu */ + ra = get_ra(inst); + rt = get_rt(inst); + emulated = kvmppc_handle_load(run, vcpu, rt, 1, 1); + vcpu->arch.gpr[ra] = vcpu->arch.paddr_accessed; + break; + + case 36: /* stw */ + rs = get_rs(inst); + emulated = kvmppc_handle_store(run, vcpu, vcpu->arch.gpr[rs], + 4, 1); + break; + + case 37: /* stwu */ + ra = get_ra(inst); + rs = get_rs(inst); + emulated = kvmppc_handle_store(run, vcpu, vcpu->arch.gpr[rs], + 4, 1); + vcpu->arch.gpr[ra] = vcpu->arch.paddr_accessed; + break; + + case 38: /* stb */ + rs = get_rs(inst); + emulated = kvmppc_handle_store(run, vcpu, vcpu->arch.gpr[rs], + 1, 1); + break; + + case 39: /* stbu */ + ra = get_ra(inst); + rs = get_rs(inst); + emulated = kvmppc_handle_store(run, vcpu, vcpu->arch.gpr[rs], + 1, 1); + vcpu->arch.gpr[ra] = vcpu->arch.paddr_accessed; + break; + + case 40: /* lhz */ + rt = get_rt(inst); + emulated = kvmppc_handle_load(run, vcpu, rt, 2, 1); + break; + + case 41: /* lhzu */ + ra = get_ra(inst); + rt = get_rt(inst); + emulated = kvmppc_handle_load(run, vcpu, rt, 2, 1); + vcpu->arch.gpr[ra] = vcpu->arch.paddr_accessed; + break; + + case 44: /* sth */ + rs = get_rs(inst); + emulated = kvmppc_handle_store(run, vcpu, vcpu->arch.gpr[rs], + 2, 1); + break; + + case 45: /* sthu */ + ra = get_ra(inst); + rs = get_rs(inst); + emulated = kvmppc_handle_store(run, vcpu, vcpu->arch.gpr[rs], + 2, 1); + vcpu->arch.gpr[ra] = vcpu->arch.paddr_accessed; + break; + + default: + printk("unknown op %d\n", get_op(inst)); + emulated = EMULATE_FAIL; + break; + } + + if (advance) + vcpu->arch.pc += 4; /* Advance past emulated instruction. */ + + return emulated; +} diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c new file mode 100644 index 000000000000..bad40bd2d3ac --- /dev/null +++ b/arch/powerpc/kvm/powerpc.c @@ -0,0 +1,436 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Copyright IBM Corp. 2007 + * + * Authors: Hollis Blanchard <hollisb@us.ibm.com> + * Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> + */ + +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/kvm_host.h> +#include <linux/module.h> +#include <linux/vmalloc.h> +#include <linux/fs.h> +#include <asm/cputable.h> +#include <asm/uaccess.h> +#include <asm/kvm_ppc.h> + + +gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn) +{ + return gfn; +} + +int kvm_cpu_has_interrupt(struct kvm_vcpu *v) +{ + /* XXX implement me */ + return 0; +} + +int kvm_arch_vcpu_runnable(struct kvm_vcpu *v) +{ + return 1; +} + + +int kvmppc_emulate_mmio(struct kvm_run *run, struct kvm_vcpu *vcpu) +{ + enum emulation_result er; + int r; + + er = kvmppc_emulate_instruction(run, vcpu); + switch (er) { + case EMULATE_DONE: + /* Future optimization: only reload non-volatiles if they were + * actually modified. */ + r = RESUME_GUEST_NV; + break; + case EMULATE_DO_MMIO: + run->exit_reason = KVM_EXIT_MMIO; + /* We must reload nonvolatiles because "update" load/store + * instructions modify register state. */ + /* Future optimization: only reload non-volatiles if they were + * actually modified. */ + r = RESUME_HOST_NV; + break; + case EMULATE_FAIL: + /* XXX Deliver Program interrupt to guest. */ + printk(KERN_EMERG "%s: emulation failed (%08x)\n", __func__, + vcpu->arch.last_inst); + r = RESUME_HOST; + break; + default: + BUG(); + } + + return r; +} + +void kvm_arch_hardware_enable(void *garbage) +{ +} + +void kvm_arch_hardware_disable(void *garbage) +{ +} + +int kvm_arch_hardware_setup(void) +{ + return 0; +} + +void kvm_arch_hardware_unsetup(void) +{ +} + +void kvm_arch_check_processor_compat(void *rtn) +{ + int r; + + if (strcmp(cur_cpu_spec->platform, "ppc440") == 0) + r = 0; + else + r = -ENOTSUPP; + + *(int *)rtn = r; +} + +struct kvm *kvm_arch_create_vm(void) +{ + struct kvm *kvm; + + kvm = kzalloc(sizeof(struct kvm), GFP_KERNEL); + if (!kvm) + return ERR_PTR(-ENOMEM); + + return kvm; +} + +static void kvmppc_free_vcpus(struct kvm *kvm) +{ + unsigned int i; + + for (i = 0; i < KVM_MAX_VCPUS; ++i) { + if (kvm->vcpus[i]) { + kvm_arch_vcpu_free(kvm->vcpus[i]); + kvm->vcpus[i] = NULL; + } + } +} + +void kvm_arch_destroy_vm(struct kvm *kvm) +{ + kvmppc_free_vcpus(kvm); + kvm_free_physmem(kvm); + kfree(kvm); +} + +int kvm_dev_ioctl_check_extension(long ext) +{ + int r; + + switch (ext) { + case KVM_CAP_USER_MEMORY: + r = 1; + break; + default: + r = 0; + break; + } + return r; + +} + +long kvm_arch_dev_ioctl(struct file *filp, + unsigned int ioctl, unsigned long arg) +{ + return -EINVAL; +} + +int kvm_arch_set_memory_region(struct kvm *kvm, + struct kvm_userspace_memory_region *mem, + struct kvm_memory_slot old, + int user_alloc) +{ + return 0; +} + +struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id) +{ + struct kvm_vcpu *vcpu; + int err; + + vcpu = kmem_cache_zalloc(kvm_vcpu_cache, GFP_KERNEL); + if (!vcpu) { + err = -ENOMEM; + goto out; + } + + err = kvm_vcpu_init(vcpu, kvm, id); + if (err) + goto free_vcpu; + + return vcpu; + +free_vcpu: + kmem_cache_free(kvm_vcpu_cache, vcpu); +out: + return ERR_PTR(err); +} + +void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu) +{ + kvm_vcpu_uninit(vcpu); + kmem_cache_free(kvm_vcpu_cache, vcpu); +} + +void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu) +{ + kvm_arch_vcpu_free(vcpu); +} + +int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu) +{ + unsigned int priority = exception_priority[BOOKE_INTERRUPT_DECREMENTER]; + + return test_bit(priority, &vcpu->arch.pending_exceptions); +} + +static void kvmppc_decrementer_func(unsigned long data) +{ + struct kvm_vcpu *vcpu = (struct kvm_vcpu *)data; + + kvmppc_queue_exception(vcpu, BOOKE_INTERRUPT_DECREMENTER); +} + +int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu) +{ + setup_timer(&vcpu->arch.dec_timer, kvmppc_decrementer_func, + (unsigned long)vcpu); + + return 0; +} + +void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu) +{ +} + +void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) +{ +} + +void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu) +{ +} + +void decache_vcpus_on_cpu(int cpu) +{ +} + +int kvm_arch_vcpu_ioctl_debug_guest(struct kvm_vcpu *vcpu, + struct kvm_debug_guest *dbg) +{ + return -ENOTSUPP; +} + +static void kvmppc_complete_dcr_load(struct kvm_vcpu *vcpu, + struct kvm_run *run) +{ + u32 *gpr = &vcpu->arch.gpr[vcpu->arch.io_gpr]; + *gpr = run->dcr.data; +} + +static void kvmppc_complete_mmio_load(struct kvm_vcpu *vcpu, + struct kvm_run *run) +{ + u32 *gpr = &vcpu->arch.gpr[vcpu->arch.io_gpr]; + + if (run->mmio.len > sizeof(*gpr)) { + printk(KERN_ERR "bad MMIO length: %d\n", run->mmio.len); + return; + } + + if (vcpu->arch.mmio_is_bigendian) { + switch (run->mmio.len) { + case 4: *gpr = *(u32 *)run->mmio.data; break; + case 2: *gpr = *(u16 *)run->mmio.data; break; + case 1: *gpr = *(u8 *)run->mmio.data; break; + } + } else { + /* Convert BE data from userland back to LE. */ + switch (run->mmio.len) { + case 4: *gpr = ld_le32((u32 *)run->mmio.data); break; + case 2: *gpr = ld_le16((u16 *)run->mmio.data); break; + case 1: *gpr = *(u8 *)run->mmio.data; break; + } + } +} + +int kvmppc_handle_load(struct kvm_run *run, struct kvm_vcpu *vcpu, + unsigned int rt, unsigned int bytes, int is_bigendian) +{ + if (bytes > sizeof(run->mmio.data)) { + printk(KERN_ERR "%s: bad MMIO length: %d\n", __func__, + run->mmio.len); + } + + run->mmio.phys_addr = vcpu->arch.paddr_accessed; + run->mmio.len = bytes; + run->mmio.is_write = 0; + + vcpu->arch.io_gpr = rt; + vcpu->arch.mmio_is_bigendian = is_bigendian; + vcpu->mmio_needed = 1; + vcpu->mmio_is_write = 0; + + return EMULATE_DO_MMIO; +} + +int kvmppc_handle_store(struct kvm_run *run, struct kvm_vcpu *vcpu, + u32 val, unsigned int bytes, int is_bigendian) +{ + void *data = run->mmio.data; + + if (bytes > sizeof(run->mmio.data)) { + printk(KERN_ERR "%s: bad MMIO length: %d\n", __func__, + run->mmio.len); + } + + run->mmio.phys_addr = vcpu->arch.paddr_accessed; + run->mmio.len = bytes; + run->mmio.is_write = 1; + vcpu->mmio_needed = 1; + vcpu->mmio_is_write = 1; + + /* Store the value at the lowest bytes in 'data'. */ + if (is_bigendian) { + switch (bytes) { + case 4: *(u32 *)data = val; break; + case 2: *(u16 *)data = val; break; + case 1: *(u8 *)data = val; break; + } + } else { + /* Store LE value into 'data'. */ + switch (bytes) { + case 4: st_le32(data, val); break; + case 2: st_le16(data, val); break; + case 1: *(u8 *)data = val; break; + } + } + + return EMULATE_DO_MMIO; +} + +int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) +{ + int r; + sigset_t sigsaved; + + if (vcpu->sigset_active) + sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved); + + if (vcpu->mmio_needed) { + if (!vcpu->mmio_is_write) + kvmppc_complete_mmio_load(vcpu, run); + vcpu->mmio_needed = 0; + } else if (vcpu->arch.dcr_needed) { + if (!vcpu->arch.dcr_is_write) + kvmppc_complete_dcr_load(vcpu, run); + vcpu->arch.dcr_needed = 0; + } + + kvmppc_check_and_deliver_interrupts(vcpu); + + local_irq_disable(); + kvm_guest_enter(); + r = __kvmppc_vcpu_run(run, vcpu); + kvm_guest_exit(); + local_irq_enable(); + + if (vcpu->sigset_active) + sigprocmask(SIG_SETMASK, &sigsaved, NULL); + + return r; +} + +int kvm_vcpu_ioctl_interrupt(struct kvm_vcpu *vcpu, struct kvm_interrupt *irq) +{ + kvmppc_queue_exception(vcpu, BOOKE_INTERRUPT_EXTERNAL); + return 0; +} + +int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu, + struct kvm_mp_state *mp_state) +{ + return -EINVAL; +} + +int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu, + struct kvm_mp_state *mp_state) +{ + return -EINVAL; +} + +long kvm_arch_vcpu_ioctl(struct file *filp, + unsigned int ioctl, unsigned long arg) +{ + struct kvm_vcpu *vcpu = filp->private_data; + void __user *argp = (void __user *)arg; + long r; + + switch (ioctl) { + case KVM_INTERRUPT: { + struct kvm_interrupt irq; + r = -EFAULT; + if (copy_from_user(&irq, argp, sizeof(irq))) + goto out; + r = kvm_vcpu_ioctl_interrupt(vcpu, &irq); + break; + } + default: + r = -EINVAL; + } + +out: + return r; +} + +int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm, struct kvm_dirty_log *log) +{ + return -ENOTSUPP; +} + +long kvm_arch_vm_ioctl(struct file *filp, + unsigned int ioctl, unsigned long arg) +{ + long r; + + switch (ioctl) { + default: + r = -EINVAL; + } + + return r; +} + +int kvm_arch_init(void *opaque) +{ + return 0; +} + +void kvm_arch_exit(void) +{ +} diff --git a/arch/powerpc/lib/rheap.c b/arch/powerpc/lib/rheap.c index 22c3b4f53de7..29b2941cada0 100644 --- a/arch/powerpc/lib/rheap.c +++ b/arch/powerpc/lib/rheap.c @@ -54,7 +54,7 @@ static int grow(rh_info_t * info, int max_blocks) new_blocks = max_blocks - info->max_blocks; - block = kmalloc(sizeof(rh_block_t) * max_blocks, GFP_KERNEL); + block = kmalloc(sizeof(rh_block_t) * max_blocks, GFP_ATOMIC); if (block == NULL) return -ENOMEM; @@ -258,7 +258,7 @@ rh_info_t *rh_create(unsigned int alignment) if ((alignment & (alignment - 1)) != 0) return ERR_PTR(-EINVAL); - info = kmalloc(sizeof(*info), GFP_KERNEL); + info = kmalloc(sizeof(*info), GFP_ATOMIC); if (info == NULL) return ERR_PTR(-ENOMEM); diff --git a/arch/powerpc/lib/string.S b/arch/powerpc/lib/string.S index c4c622d8e6ac..49eb1f1a2bb4 100644 --- a/arch/powerpc/lib/string.S +++ b/arch/powerpc/lib/string.S @@ -75,6 +75,20 @@ _GLOBAL(strcmp) beq 1b blr +_GLOBAL(strncmp) + PPC_LCMPI r5,0 + beqlr + mtctr r5 + addi r5,r3,-1 + addi r4,r4,-1 +1: lbzu r3,1(r5) + cmpwi 1,r3,0 + lbzu r0,1(r4) + subf. r3,r0,r3 + beqlr 1 + bdnzt eq,1b + blr + _GLOBAL(strlen) addi r4,r3,-1 1: lbzu r0,1(r4) diff --git a/arch/powerpc/math-emu/fabs.c b/arch/powerpc/math-emu/fabs.c index 41f0617f3d3a..549baba5948f 100644 --- a/arch/powerpc/math-emu/fabs.c +++ b/arch/powerpc/math-emu/fabs.c @@ -9,7 +9,7 @@ fabs(u32 *frD, u32 *frB) frD[1] = frB[1]; #ifdef DEBUG - printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB); + printk("%s: D %p, B %p: ", __func__, frD, frB); dump_double(frD); printk("\n"); #endif diff --git a/arch/powerpc/math-emu/fadd.c b/arch/powerpc/math-emu/fadd.c index fc8836488b64..7befbbf2c332 100644 --- a/arch/powerpc/math-emu/fadd.c +++ b/arch/powerpc/math-emu/fadd.c @@ -14,7 +14,7 @@ fadd(void *frD, void *frA, void *frB) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB); + printk("%s: %p %p %p\n", __func__, frD, frA, frB); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/fadds.c b/arch/powerpc/math-emu/fadds.c index 93025b6c8f3c..2b346b38b480 100644 --- a/arch/powerpc/math-emu/fadds.c +++ b/arch/powerpc/math-emu/fadds.c @@ -15,7 +15,7 @@ fadds(void *frD, void *frA, void *frB) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB); + printk("%s: %p %p %p\n", __func__, frD, frA, frB); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/fcmpo.c b/arch/powerpc/math-emu/fcmpo.c index 4efac394b4cb..36d689044c63 100644 --- a/arch/powerpc/math-emu/fcmpo.c +++ b/arch/powerpc/math-emu/fcmpo.c @@ -15,7 +15,7 @@ fcmpo(u32 *ccr, int crfD, void *frA, void *frB) int ret = 0; #ifdef DEBUG - printk("%s: %p (%08x) %d %p %p\n", __FUNCTION__, ccr, *ccr, crfD, frA, frB); + printk("%s: %p (%08x) %d %p %p\n", __func__, ccr, *ccr, crfD, frA, frB); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/fcmpu.c b/arch/powerpc/math-emu/fcmpu.c index b7e33176e618..53d93894f2a6 100644 --- a/arch/powerpc/math-emu/fcmpu.c +++ b/arch/powerpc/math-emu/fcmpu.c @@ -14,7 +14,7 @@ fcmpu(u32 *ccr, int crfD, void *frA, void *frB) long cmp; #ifdef DEBUG - printk("%s: %p (%08x) %d %p %p\n", __FUNCTION__, ccr, *ccr, crfD, frA, frB); + printk("%s: %p (%08x) %d %p %p\n", __func__, ccr, *ccr, crfD, frA, frB); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/fctiw.c b/arch/powerpc/math-emu/fctiw.c index 3b3c98b840cf..fcd7a95e021d 100644 --- a/arch/powerpc/math-emu/fctiw.c +++ b/arch/powerpc/math-emu/fctiw.c @@ -16,7 +16,7 @@ fctiw(u32 *frD, void *frB) frD[1] = r; #ifdef DEBUG - printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB); + printk("%s: D %p, B %p: ", __func__, frD, frB); dump_double(frD); printk("\n"); #endif diff --git a/arch/powerpc/math-emu/fctiwz.c b/arch/powerpc/math-emu/fctiwz.c index 7717eb6fcfb6..1514d59e146e 100644 --- a/arch/powerpc/math-emu/fctiwz.c +++ b/arch/powerpc/math-emu/fctiwz.c @@ -23,7 +23,7 @@ fctiwz(u32 *frD, void *frB) __FPU_FPSCR = fpscr; #ifdef DEBUG - printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB); + printk("%s: D %p, B %p: ", __func__, frD, frB); dump_double(frD); printk("\n"); #endif diff --git a/arch/powerpc/math-emu/fdiv.c b/arch/powerpc/math-emu/fdiv.c index f2fba825b2d0..18a20fe396b0 100644 --- a/arch/powerpc/math-emu/fdiv.c +++ b/arch/powerpc/math-emu/fdiv.c @@ -14,7 +14,7 @@ fdiv(void *frD, void *frA, void *frB) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB); + printk("%s: %p %p %p\n", __func__, frD, frA, frB); #endif __FP_UNPACK_D(A, frA); @@ -28,13 +28,13 @@ fdiv(void *frD, void *frA, void *frB) if (A_c == FP_CLS_ZERO && B_c == FP_CLS_ZERO) { ret |= EFLAG_VXZDZ; #ifdef DEBUG - printk("%s: FPSCR_VXZDZ raised\n", __FUNCTION__); + printk("%s: FPSCR_VXZDZ raised\n", __func__); #endif } if (A_c == FP_CLS_INF && B_c == FP_CLS_INF) { ret |= EFLAG_VXIDI; #ifdef DEBUG - printk("%s: FPSCR_VXIDI raised\n", __FUNCTION__); + printk("%s: FPSCR_VXIDI raised\n", __func__); #endif } diff --git a/arch/powerpc/math-emu/fdivs.c b/arch/powerpc/math-emu/fdivs.c index b971196e3175..24feed689c35 100644 --- a/arch/powerpc/math-emu/fdivs.c +++ b/arch/powerpc/math-emu/fdivs.c @@ -15,7 +15,7 @@ fdivs(void *frD, void *frA, void *frB) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB); + printk("%s: %p %p %p\n", __func__, frD, frA, frB); #endif __FP_UNPACK_D(A, frA); @@ -29,13 +29,13 @@ fdivs(void *frD, void *frA, void *frB) if (A_c == FP_CLS_ZERO && B_c == FP_CLS_ZERO) { ret |= EFLAG_VXZDZ; #ifdef DEBUG - printk("%s: FPSCR_VXZDZ raised\n", __FUNCTION__); + printk("%s: FPSCR_VXZDZ raised\n", __func__); #endif } if (A_c == FP_CLS_INF && B_c == FP_CLS_INF) { ret |= EFLAG_VXIDI; #ifdef DEBUG - printk("%s: FPSCR_VXIDI raised\n", __FUNCTION__); + printk("%s: FPSCR_VXIDI raised\n", __func__); #endif } diff --git a/arch/powerpc/math-emu/fmadd.c b/arch/powerpc/math-emu/fmadd.c index 0a1dbce793e9..dedb465fdc68 100644 --- a/arch/powerpc/math-emu/fmadd.c +++ b/arch/powerpc/math-emu/fmadd.c @@ -16,7 +16,7 @@ fmadd(void *frD, void *frA, void *frB, void *frC) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC); + printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/fmadds.c b/arch/powerpc/math-emu/fmadds.c index 0f70bba9445e..6bbb56d5502c 100644 --- a/arch/powerpc/math-emu/fmadds.c +++ b/arch/powerpc/math-emu/fmadds.c @@ -17,7 +17,7 @@ fmadds(void *frD, void *frA, void *frB, void *frC) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC); + printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/fmr.c b/arch/powerpc/math-emu/fmr.c index 28df700c0c7e..bd55384b8196 100644 --- a/arch/powerpc/math-emu/fmr.c +++ b/arch/powerpc/math-emu/fmr.c @@ -9,7 +9,7 @@ fmr(u32 *frD, u32 *frB) frD[1] = frB[1]; #ifdef DEBUG - printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB); + printk("%s: D %p, B %p: ", __func__, frD, frB); dump_double(frD); printk("\n"); #endif diff --git a/arch/powerpc/math-emu/fmsub.c b/arch/powerpc/math-emu/fmsub.c index 203fd48a6fec..f311e2c7e67e 100644 --- a/arch/powerpc/math-emu/fmsub.c +++ b/arch/powerpc/math-emu/fmsub.c @@ -16,7 +16,7 @@ fmsub(void *frD, void *frA, void *frB, void *frC) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC); + printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/fmsubs.c b/arch/powerpc/math-emu/fmsubs.c index 8ce68624c189..81a716d3ee2e 100644 --- a/arch/powerpc/math-emu/fmsubs.c +++ b/arch/powerpc/math-emu/fmsubs.c @@ -17,7 +17,7 @@ fmsubs(void *frD, void *frA, void *frB, void *frC) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC); + printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/fmul.c b/arch/powerpc/math-emu/fmul.c index 66c7e79aae2e..2f3d32784a04 100644 --- a/arch/powerpc/math-emu/fmul.c +++ b/arch/powerpc/math-emu/fmul.c @@ -14,7 +14,7 @@ fmul(void *frD, void *frA, void *frB) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB); + printk("%s: %p %p %p\n", __func__, frD, frA, frB); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/fmuls.c b/arch/powerpc/math-emu/fmuls.c index 26bc4278271c..962b5883f784 100644 --- a/arch/powerpc/math-emu/fmuls.c +++ b/arch/powerpc/math-emu/fmuls.c @@ -15,7 +15,7 @@ fmuls(void *frD, void *frA, void *frB) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB); + printk("%s: %p %p %p\n", __func__, frD, frA, frB); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/fnabs.c b/arch/powerpc/math-emu/fnabs.c index c6b913d179e0..a7d34f3d9499 100644 --- a/arch/powerpc/math-emu/fnabs.c +++ b/arch/powerpc/math-emu/fnabs.c @@ -9,7 +9,7 @@ fnabs(u32 *frD, u32 *frB) frD[1] = frB[1]; #ifdef DEBUG - printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB); + printk("%s: D %p, B %p: ", __func__, frD, frB); dump_double(frD); printk("\n"); #endif diff --git a/arch/powerpc/math-emu/fneg.c b/arch/powerpc/math-emu/fneg.c index fe9a98deff69..1e988cd9c6cc 100644 --- a/arch/powerpc/math-emu/fneg.c +++ b/arch/powerpc/math-emu/fneg.c @@ -9,7 +9,7 @@ fneg(u32 *frD, u32 *frB) frD[1] = frB[1]; #ifdef DEBUG - printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB); + printk("%s: D %p, B %p: ", __func__, frD, frB); dump_double(frD); printk("\n"); #endif diff --git a/arch/powerpc/math-emu/fnmadd.c b/arch/powerpc/math-emu/fnmadd.c index 7f312276d920..8cf7827c4fb5 100644 --- a/arch/powerpc/math-emu/fnmadd.c +++ b/arch/powerpc/math-emu/fnmadd.c @@ -16,7 +16,7 @@ fnmadd(void *frD, void *frA, void *frB, void *frC) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC); + printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/fnmadds.c b/arch/powerpc/math-emu/fnmadds.c index 65454c9c70bc..f1c4f0f0d807 100644 --- a/arch/powerpc/math-emu/fnmadds.c +++ b/arch/powerpc/math-emu/fnmadds.c @@ -17,7 +17,7 @@ fnmadds(void *frD, void *frA, void *frB, void *frC) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC); + printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/fnmsub.c b/arch/powerpc/math-emu/fnmsub.c index f1ca7482b5f0..98944e6e2601 100644 --- a/arch/powerpc/math-emu/fnmsub.c +++ b/arch/powerpc/math-emu/fnmsub.c @@ -16,7 +16,7 @@ fnmsub(void *frD, void *frA, void *frB, void *frC) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC); + printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/fnmsubs.c b/arch/powerpc/math-emu/fnmsubs.c index 5c9a09a87dc7..b20f4eb63fb9 100644 --- a/arch/powerpc/math-emu/fnmsubs.c +++ b/arch/powerpc/math-emu/fnmsubs.c @@ -17,7 +17,7 @@ fnmsubs(void *frD, void *frA, void *frB, void *frC) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC); + printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/fres.c b/arch/powerpc/math-emu/fres.c index ec11e46d20af..10ecbd08b79e 100644 --- a/arch/powerpc/math-emu/fres.c +++ b/arch/powerpc/math-emu/fres.c @@ -6,7 +6,7 @@ int fres(void *frD, void *frB) { #ifdef DEBUG - printk("%s: %p %p\n", __FUNCTION__, frD, frB); + printk("%s: %p %p\n", __func__, frD, frB); #endif return -ENOSYS; } diff --git a/arch/powerpc/math-emu/frsp.c b/arch/powerpc/math-emu/frsp.c index d879b2a3d0c9..724ccbc0468e 100644 --- a/arch/powerpc/math-emu/frsp.c +++ b/arch/powerpc/math-emu/frsp.c @@ -12,7 +12,7 @@ frsp(void *frD, void *frB) FP_DECL_D(B); #ifdef DEBUG - printk("%s: D %p, B %p\n", __FUNCTION__, frD, frB); + printk("%s: D %p, B %p\n", __func__, frD, frB); #endif __FP_UNPACK_D(B, frB); diff --git a/arch/powerpc/math-emu/frsqrte.c b/arch/powerpc/math-emu/frsqrte.c index a11ae1829850..1d0a3a0fd0e6 100644 --- a/arch/powerpc/math-emu/frsqrte.c +++ b/arch/powerpc/math-emu/frsqrte.c @@ -6,7 +6,7 @@ int frsqrte(void *frD, void *frB) { #ifdef DEBUG - printk("%s: %p %p\n", __FUNCTION__, frD, frB); + printk("%s: %p %p\n", __func__, frD, frB); #endif return 0; } diff --git a/arch/powerpc/math-emu/fsel.c b/arch/powerpc/math-emu/fsel.c index e36e6e72819a..ecb5f28eb1f3 100644 --- a/arch/powerpc/math-emu/fsel.c +++ b/arch/powerpc/math-emu/fsel.c @@ -11,7 +11,7 @@ fsel(u32 *frD, void *frA, u32 *frB, u32 *frC) FP_DECL_D(A); #ifdef DEBUG - printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC); + printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/fsqrt.c b/arch/powerpc/math-emu/fsqrt.c index 6f8319f64a8a..38ec2b752e9d 100644 --- a/arch/powerpc/math-emu/fsqrt.c +++ b/arch/powerpc/math-emu/fsqrt.c @@ -13,7 +13,7 @@ fsqrt(void *frD, void *frB) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frB); + printk("%s: %p %p %p %p\n", __func__, frD, frB); #endif __FP_UNPACK_D(B, frB); diff --git a/arch/powerpc/math-emu/fsqrts.c b/arch/powerpc/math-emu/fsqrts.c index 3b2b1cf55c12..335263e06ee5 100644 --- a/arch/powerpc/math-emu/fsqrts.c +++ b/arch/powerpc/math-emu/fsqrts.c @@ -14,7 +14,7 @@ fsqrts(void *frD, void *frB) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frB); + printk("%s: %p %p %p %p\n", __func__, frD, frB); #endif __FP_UNPACK_D(B, frB); diff --git a/arch/powerpc/math-emu/fsub.c b/arch/powerpc/math-emu/fsub.c index 956679042bb2..208d20fc52a5 100644 --- a/arch/powerpc/math-emu/fsub.c +++ b/arch/powerpc/math-emu/fsub.c @@ -14,7 +14,7 @@ fsub(void *frD, void *frA, void *frB) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB); + printk("%s: %p %p %p\n", __func__, frD, frA, frB); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/fsubs.c b/arch/powerpc/math-emu/fsubs.c index 3428117dfe8c..0e61b808c44b 100644 --- a/arch/powerpc/math-emu/fsubs.c +++ b/arch/powerpc/math-emu/fsubs.c @@ -15,7 +15,7 @@ fsubs(void *frD, void *frA, void *frB) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB); + printk("%s: %p %p %p\n", __func__, frD, frA, frB); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/lfd.c b/arch/powerpc/math-emu/lfd.c index 7d38101c329b..6ec90b57c61a 100644 --- a/arch/powerpc/math-emu/lfd.c +++ b/arch/powerpc/math-emu/lfd.c @@ -11,7 +11,7 @@ lfd(void *frD, void *ea) if (copy_from_user(frD, ea, sizeof(double))) return -EFAULT; #ifdef DEBUG - printk("%s: D %p, ea %p: ", __FUNCTION__, frD, ea); + printk("%s: D %p, ea %p: ", __func__, frD, ea); dump_double(frD); printk("\n"); #endif diff --git a/arch/powerpc/math-emu/lfs.c b/arch/powerpc/math-emu/lfs.c index c86dee3d7655..6f18ebe3a7ff 100644 --- a/arch/powerpc/math-emu/lfs.c +++ b/arch/powerpc/math-emu/lfs.c @@ -14,7 +14,7 @@ lfs(void *frD, void *ea) float f; #ifdef DEBUG - printk("%s: D %p, ea %p\n", __FUNCTION__, frD, ea); + printk("%s: D %p, ea %p\n", __func__, frD, ea); #endif if (copy_from_user(&f, ea, sizeof(float))) diff --git a/arch/powerpc/math-emu/mcrfs.c b/arch/powerpc/math-emu/mcrfs.c index 106dd912914b..41ba247faf89 100644 --- a/arch/powerpc/math-emu/mcrfs.c +++ b/arch/powerpc/math-emu/mcrfs.c @@ -10,7 +10,7 @@ mcrfs(u32 *ccr, u32 crfD, u32 crfS) u32 value, clear; #ifdef DEBUG - printk("%s: %p (%08x) %d %d\n", __FUNCTION__, ccr, *ccr, crfD, crfS); + printk("%s: %p (%08x) %d %d\n", __func__, ccr, *ccr, crfD, crfS); #endif clear = 15 << ((7 - crfS) << 2); @@ -24,7 +24,7 @@ mcrfs(u32 *ccr, u32 crfD, u32 crfS) *ccr |= (value << ((7 - crfD) << 2)); #ifdef DEBUG - printk("CR: %08x\n", __FUNCTION__, *ccr); + printk("CR: %08x\n", __func__, *ccr); #endif return 0; diff --git a/arch/powerpc/math-emu/mffs.c b/arch/powerpc/math-emu/mffs.c index f477c9170e75..b0e2106e6eb6 100644 --- a/arch/powerpc/math-emu/mffs.c +++ b/arch/powerpc/math-emu/mffs.c @@ -10,7 +10,7 @@ mffs(u32 *frD) frD[1] = __FPU_FPSCR; #ifdef DEBUG - printk("%s: frD %p: %08x.%08x\n", __FUNCTION__, frD, frD[0], frD[1]); + printk("%s: frD %p: %08x.%08x\n", __func__, frD, frD[0], frD[1]); #endif return 0; diff --git a/arch/powerpc/math-emu/mtfsb0.c b/arch/powerpc/math-emu/mtfsb0.c index 99bfd80f4af3..d3062350ea21 100644 --- a/arch/powerpc/math-emu/mtfsb0.c +++ b/arch/powerpc/math-emu/mtfsb0.c @@ -11,7 +11,7 @@ mtfsb0(int crbD) __FPU_FPSCR &= ~(1 << (31 - crbD)); #ifdef DEBUG - printk("%s: %d %08lx\n", __FUNCTION__, crbD, __FPU_FPSCR); + printk("%s: %d %08lx\n", __func__, crbD, __FPU_FPSCR); #endif return 0; diff --git a/arch/powerpc/math-emu/mtfsb1.c b/arch/powerpc/math-emu/mtfsb1.c index 3d9e7ed92d2b..2e948704b56e 100644 --- a/arch/powerpc/math-emu/mtfsb1.c +++ b/arch/powerpc/math-emu/mtfsb1.c @@ -11,7 +11,7 @@ mtfsb1(int crbD) __FPU_FPSCR |= (1 << (31 - crbD)); #ifdef DEBUG - printk("%s: %d %08lx\n", __FUNCTION__, crbD, __FPU_FPSCR); + printk("%s: %d %08lx\n", __func__, crbD, __FPU_FPSCR); #endif return 0; diff --git a/arch/powerpc/math-emu/mtfsf.c b/arch/powerpc/math-emu/mtfsf.c index d70cf714994c..48014d8e3af1 100644 --- a/arch/powerpc/math-emu/mtfsf.c +++ b/arch/powerpc/math-emu/mtfsf.c @@ -38,7 +38,7 @@ mtfsf(unsigned int FM, u32 *frB) __FPU_FPSCR |= (frB[1] & mask); #ifdef DEBUG - printk("%s: %02x %p: %08lx\n", __FUNCTION__, FM, frB, __FPU_FPSCR); + printk("%s: %02x %p: %08lx\n", __func__, FM, frB, __FPU_FPSCR); #endif return 0; diff --git a/arch/powerpc/math-emu/mtfsfi.c b/arch/powerpc/math-emu/mtfsfi.c index 71df854baa7e..031e20093549 100644 --- a/arch/powerpc/math-emu/mtfsfi.c +++ b/arch/powerpc/math-emu/mtfsfi.c @@ -16,7 +16,7 @@ mtfsfi(unsigned int crfD, unsigned int IMM) __FPU_FPSCR |= (IMM & 0xf) << ((7 - crfD) << 2); #ifdef DEBUG - printk("%s: %d %x: %08lx\n", __FUNCTION__, crfD, IMM, __FPU_FPSCR); + printk("%s: %d %x: %08lx\n", __func__, crfD, IMM, __FPU_FPSCR); #endif return 0; diff --git a/arch/powerpc/math-emu/stfd.c b/arch/powerpc/math-emu/stfd.c index 3f8c2558a9e8..33a165c8df0f 100644 --- a/arch/powerpc/math-emu/stfd.c +++ b/arch/powerpc/math-emu/stfd.c @@ -7,7 +7,7 @@ stfd(void *frS, void *ea) { #if 0 #ifdef DEBUG - printk("%s: S %p, ea %p: ", __FUNCTION__, frS, ea); + printk("%s: S %p, ea %p: ", __func__, frS, ea); dump_double(frS); printk("\n"); #endif diff --git a/arch/powerpc/math-emu/stfiwx.c b/arch/powerpc/math-emu/stfiwx.c index 95caaeec6a08..f15a35f67e2c 100644 --- a/arch/powerpc/math-emu/stfiwx.c +++ b/arch/powerpc/math-emu/stfiwx.c @@ -6,7 +6,7 @@ int stfiwx(u32 *frS, void *ea) { #ifdef DEBUG - printk("%s: %p %p\n", __FUNCTION__, frS, ea); + printk("%s: %p %p\n", __func__, frS, ea); #endif if (copy_to_user(ea, &frS[1], sizeof(frS[1]))) diff --git a/arch/powerpc/math-emu/stfs.c b/arch/powerpc/math-emu/stfs.c index e87ca23c6dc3..8689aa48ef69 100644 --- a/arch/powerpc/math-emu/stfs.c +++ b/arch/powerpc/math-emu/stfs.c @@ -15,7 +15,7 @@ stfs(void *frS, void *ea) int err; #ifdef DEBUG - printk("%s: S %p, ea %p\n", __FUNCTION__, frS, ea); + printk("%s: S %p, ea %p\n", __func__, frS, ea); #endif __FP_UNPACK_D(A, frS); diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c index 3899ea97fbdf..cecbbc76f624 100644 --- a/arch/powerpc/mm/40x_mmu.c +++ b/arch/powerpc/mm/40x_mmu.c @@ -97,7 +97,7 @@ unsigned long __init mmu_mapin_ram(void) phys_addr_t p; v = KERNELBASE; - p = PPC_MEMSTART; + p = 0; s = total_lowmem; if (__map_without_ltlbs) diff --git a/arch/powerpc/mm/44x_mmu.c b/arch/powerpc/mm/44x_mmu.c index 04dc08798d3d..953fb919eb06 100644 --- a/arch/powerpc/mm/44x_mmu.c +++ b/arch/powerpc/mm/44x_mmu.c @@ -67,7 +67,7 @@ unsigned long __init mmu_mapin_ram(void) /* Pin in enough TLBs to cover any lowmem not covered by the * initial 256M mapping established in head_44x.S */ - for (addr = PPC_PIN_SIZE; addr < total_lowmem; + for (addr = PPC_PIN_SIZE; addr < lowmem_end_addr; addr += PPC_PIN_SIZE) ppc44x_pin_tlb(addr + PAGE_OFFSET, addr); diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile index 41649a5d3602..1c00e0196f6c 100644 --- a/arch/powerpc/mm/Makefile +++ b/arch/powerpc/mm/Makefile @@ -6,7 +6,7 @@ ifeq ($(CONFIG_PPC64),y) EXTRA_CFLAGS += -mno-minimal-toc endif -obj-y := fault.o mem.o lmb.o \ +obj-y := fault.o mem.o \ init_$(CONFIG_WORD_SIZE).o \ pgtable_$(CONFIG_WORD_SIZE).o \ mmu_context_$(CONFIG_WORD_SIZE).o diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c index c93a966b7e4b..ce10e2b1b902 100644 --- a/arch/powerpc/mm/fsl_booke_mmu.c +++ b/arch/powerpc/mm/fsl_booke_mmu.c @@ -49,18 +49,15 @@ #include <asm/mmu.h> #include <asm/uaccess.h> #include <asm/smp.h> -#include <asm/bootx.h> #include <asm/machdep.h> #include <asm/setup.h> +#include "mmu_decl.h" + extern void loadcam_entry(unsigned int index); unsigned int tlbcam_index; unsigned int num_tlbcam_entries; static unsigned long __cam0, __cam1, __cam2; -extern unsigned long total_lowmem; -extern unsigned long __max_low_memory; -extern unsigned long __initial_memory_limit; -#define MAX_LOW_MEM CONFIG_LOWMEM_SIZE #define NUM_TLBCAMS (16) @@ -165,15 +162,15 @@ void invalidate_tlbcam_entry(int index) void __init cam_mapin_ram(unsigned long cam0, unsigned long cam1, unsigned long cam2) { - settlbcam(0, PAGE_OFFSET, PPC_MEMSTART, cam0, _PAGE_KERNEL, 0); + settlbcam(0, PAGE_OFFSET, memstart_addr, cam0, _PAGE_KERNEL, 0); tlbcam_index++; if (cam1) { tlbcam_index++; - settlbcam(1, PAGE_OFFSET+cam0, PPC_MEMSTART+cam0, cam1, _PAGE_KERNEL, 0); + settlbcam(1, PAGE_OFFSET+cam0, memstart_addr+cam0, cam1, _PAGE_KERNEL, 0); } if (cam2) { tlbcam_index++; - settlbcam(2, PAGE_OFFSET+cam0+cam1, PPC_MEMSTART+cam0+cam1, cam2, _PAGE_KERNEL, 0); + settlbcam(2, PAGE_OFFSET+cam0+cam1, memstart_addr+cam0+cam1, cam2, _PAGE_KERNEL, 0); } } @@ -196,35 +193,32 @@ unsigned long __init mmu_mapin_ram(void) void __init adjust_total_lowmem(void) { - unsigned long max_low_mem = MAX_LOW_MEM; - unsigned long cam_max = 0x10000000; - unsigned long ram; + phys_addr_t max_lowmem_size = __max_low_memory; + phys_addr_t cam_max_size = 0x10000000; + phys_addr_t ram; - /* adjust CAM size to max_low_mem */ - if (max_low_mem < cam_max) - cam_max = max_low_mem; + /* adjust CAM size to max_lowmem_size */ + if (max_lowmem_size < cam_max_size) + cam_max_size = max_lowmem_size; - /* adjust lowmem size to max_low_mem */ - if (max_low_mem < total_lowmem) - ram = max_low_mem; - else - ram = total_lowmem; + /* adjust lowmem size to max_lowmem_size */ + ram = min(max_lowmem_size, (phys_addr_t)total_lowmem); /* Calculate CAM values */ __cam0 = 1UL << 2 * (__ilog2(ram) / 2); - if (__cam0 > cam_max) - __cam0 = cam_max; + if (__cam0 > cam_max_size) + __cam0 = cam_max_size; ram -= __cam0; if (ram) { __cam1 = 1UL << 2 * (__ilog2(ram) / 2); - if (__cam1 > cam_max) - __cam1 = cam_max; + if (__cam1 > cam_max_size) + __cam1 = cam_max_size; ram -= __cam1; } if (ram) { __cam2 = 1UL << 2 * (__ilog2(ram) / 2); - if (__cam2 > cam_max) - __cam2 = cam_max; + if (__cam2 > cam_max_size) + __cam2 = cam_max_size; ram -= __cam2; } @@ -232,6 +226,6 @@ adjust_total_lowmem(void) " CAM2=%ldMb residual: %ldMb\n", __cam0 >> 20, __cam1 >> 20, __cam2 >> 20, (total_lowmem - __cam0 - __cam1 - __cam2) >> 20); - __max_low_memory = max_low_mem = __cam0 + __cam1 + __cam2; - __initial_memory_limit = __max_low_memory; + __max_low_memory = __cam0 + __cam1 + __cam2; + __initial_memory_limit_addr = memstart_addr + __max_low_memory; } diff --git a/arch/powerpc/mm/hash_low_32.S b/arch/powerpc/mm/hash_low_32.S index 7f830a4888d6..ddeaf9e38ad5 100644 --- a/arch/powerpc/mm/hash_low_32.S +++ b/arch/powerpc/mm/hash_low_32.S @@ -44,6 +44,9 @@ mmu_hash_lock: #ifdef CONFIG_SMP .text _GLOBAL(hash_page_sync) + mfmsr r10 + rlwinm r0,r10,0,17,15 /* clear bit 16 (MSR_EE) */ + mtmsr r0 lis r8,mmu_hash_lock@h ori r8,r8,mmu_hash_lock@l lis r0,0x0fff @@ -60,8 +63,9 @@ _GLOBAL(hash_page_sync) eieio li r0,0 stw r0,0(r8) - blr -#endif + mtmsr r10 + blr +#endif /* CONFIG_SMP */ /* * Load a PTE into the hash table, if possible. @@ -187,7 +191,7 @@ _GLOBAL(add_hash_page) add r3,r3,r0 /* note create_hpte trims to 24 bits */ #ifdef CONFIG_SMP - rlwinm r8,r1,0,0,18 /* use cpu number to make tag */ + rlwinm r8,r1,0,0,(31-THREAD_SHIFT) /* use cpu number to make tag */ lwz r8,TI_CPU(r8) /* to go in mmu_hash_lock */ oris r8,r8,12 #endif /* CONFIG_SMP */ @@ -522,7 +526,7 @@ _GLOBAL(flush_hash_pages) #ifdef CONFIG_SMP addis r9,r7,mmu_hash_lock@ha addi r9,r9,mmu_hash_lock@l - rlwinm r8,r1,0,0,18 + rlwinm r8,r1,0,0,(31-THREAD_SHIFT) add r8,r8,r7 lwz r8,TI_CPU(r8) oris r8,r8,9 diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 32f416175db1..2b5a399f6fa6 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -31,6 +31,7 @@ #include <linux/cache.h> #include <linux/init.h> #include <linux/signal.h> +#include <linux/lmb.h> #include <asm/processor.h> #include <asm/pgtable.h> @@ -41,7 +42,7 @@ #include <asm/system.h> #include <asm/uaccess.h> #include <asm/machdep.h> -#include <asm/lmb.h> +#include <asm/prom.h> #include <asm/abs_addr.h> #include <asm/tlbflush.h> #include <asm/io.h> @@ -191,6 +192,29 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend, return ret < 0 ? ret : 0; } +#ifdef CONFIG_MEMORY_HOTPLUG +static int htab_remove_mapping(unsigned long vstart, unsigned long vend, + int psize, int ssize) +{ + unsigned long vaddr; + unsigned int step, shift; + + shift = mmu_psize_defs[psize].shift; + step = 1 << shift; + + if (!ppc_md.hpte_removebolted) { + printk(KERN_WARNING "Platform doesn't implement " + "hpte_removebolted\n"); + return -EINVAL; + } + + for (vaddr = vstart; vaddr < vend; vaddr += step) + ppc_md.hpte_removebolted(vaddr, psize, ssize); + + return 0; +} +#endif /* CONFIG_MEMORY_HOTPLUG */ + static int __init htab_dt_scan_seg_sizes(unsigned long node, const char *uname, int depth, void *data) @@ -351,9 +375,14 @@ static void __init htab_init_page_sizes(void) mmu_vmalloc_psize = MMU_PAGE_64K; if (mmu_linear_psize == MMU_PAGE_4K) mmu_linear_psize = MMU_PAGE_64K; - if (cpu_has_feature(CPU_FTR_CI_LARGE_PAGE)) - mmu_io_psize = MMU_PAGE_64K; - else + if (cpu_has_feature(CPU_FTR_CI_LARGE_PAGE)) { + /* + * Don't use 64k pages for ioremap on pSeries, since + * that would stop us accessing the HEA ethernet. + */ + if (!machine_is(pseries)) + mmu_io_psize = MMU_PAGE_64K; + } else mmu_ci_restrictions = 1; } #endif /* CONFIG_PPC_64K_PAGES */ @@ -429,6 +458,12 @@ void create_section_mapping(unsigned long start, unsigned long end) _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX, mmu_linear_psize, mmu_kernel_ssize)); } + +int remove_section_mapping(unsigned long start, unsigned long end) +{ + return htab_remove_mapping(start, end, mmu_linear_psize, + mmu_kernel_ssize); +} #endif /* CONFIG_MEMORY_HOTPLUG */ static inline void make_bl(unsigned int *insn_addr, void *func) @@ -506,10 +541,10 @@ void __init htab_initialize(void) } else { /* Find storage for the HPT. Must be contiguous in * the absolute address space. On cell we want it to be - * in the first 1 Gig. + * in the first 2 Gig so we can use it for IOMMU hacks. */ if (machine_is(cell)) - limit = 0x40000000; + limit = 0x80000000; else limit = 0; diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index 977cb1ee5e72..1952b4d3fa7f 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -30,6 +30,7 @@ #include <linux/highmem.h> #include <linux/initrd.h> #include <linux/pagemap.h> +#include <linux/lmb.h> #include <asm/pgalloc.h> #include <asm/prom.h> @@ -41,7 +42,6 @@ #include <asm/machdep.h> #include <asm/btext.h> #include <asm/tlb.h> -#include <asm/lmb.h> #include <asm/sections.h> #include "mmu_decl.h" @@ -59,8 +59,11 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); unsigned long total_memory; unsigned long total_lowmem; -unsigned long ppc_memstart; -unsigned long ppc_memoffset = PAGE_OFFSET; +phys_addr_t memstart_addr = (phys_addr_t)~0ull; +EXPORT_SYMBOL(memstart_addr); +phys_addr_t kernstart_addr; +EXPORT_SYMBOL(kernstart_addr); +phys_addr_t lowmem_end_addr; int boot_mapsize; #ifdef CONFIG_PPC_PMAC @@ -68,14 +71,6 @@ unsigned long agp_special_page; EXPORT_SYMBOL(agp_special_page); #endif -#ifdef CONFIG_HIGHMEM -pte_t *kmap_pte; -pgprot_t kmap_prot; - -EXPORT_SYMBOL(kmap_prot); -EXPORT_SYMBOL(kmap_pte); -#endif - void MMU_init(void); /* XXX should be in current.h -- paulus */ @@ -95,10 +90,10 @@ int __map_without_ltlbs; unsigned long __max_low_memory = MAX_LOW_MEM; /* - * limit of what is accessible with initial MMU setup - + * address of the limit of what is accessible with initial MMU setup - * 256MB usually, but only 16MB on 601. */ -unsigned long __initial_memory_limit = 0x10000000; +phys_addr_t __initial_memory_limit_addr = (phys_addr_t)0x10000000; /* * Check for command-line options that affect what MMU_init will do. @@ -131,10 +126,10 @@ void __init MMU_init(void) /* 601 can only access 16MB at the moment */ if (PVR_VER(mfspr(SPRN_PVR)) == 1) - __initial_memory_limit = 0x01000000; + __initial_memory_limit_addr = 0x01000000; /* 8xx can only access 8MB at the moment */ if (PVR_VER(mfspr(SPRN_PVR)) == 0x50) - __initial_memory_limit = 0x00800000; + __initial_memory_limit_addr = 0x00800000; /* parse args from command line */ MMU_setup(); @@ -145,8 +140,8 @@ void __init MMU_init(void) printk(KERN_WARNING "Only using first contiguous memory region"); } - total_memory = lmb_end_of_DRAM(); - total_lowmem = total_memory; + total_lowmem = total_memory = lmb_end_of_DRAM() - memstart_addr; + lowmem_end_addr = memstart_addr + total_lowmem; #ifdef CONFIG_FSL_BOOKE /* Freescale Book-E parts expect lowmem to be mapped by fixed TLB @@ -157,9 +152,10 @@ void __init MMU_init(void) if (total_lowmem > __max_low_memory) { total_lowmem = __max_low_memory; + lowmem_end_addr = memstart_addr + total_lowmem; #ifndef CONFIG_HIGHMEM total_memory = total_lowmem; - lmb_enforce_memory_limit(total_lowmem); + lmb_enforce_memory_limit(lowmem_end_addr); lmb_analyze(); #endif /* CONFIG_HIGHMEM */ } @@ -184,8 +180,6 @@ void __init MMU_init(void) /* Map in I/O resources */ if (ppc_md.progress) ppc_md.progress("MMU:setio", 0x302); - if (ppc_md.setup_io_mappings) - ppc_md.setup_io_mappings(); /* Initialize the context management stuff */ mmu_context_init(); @@ -208,7 +202,7 @@ void __init *early_get_page(void) p = alloc_bootmem_pages(PAGE_SIZE); } else { p = __va(lmb_alloc_base(PAGE_SIZE, PAGE_SIZE, - __initial_memory_limit)); + __initial_memory_limit_addr)); } return p; } @@ -276,7 +270,7 @@ static int __init setup_kcore(void) kcore_mem = kmalloc(sizeof(struct kcore_list), GFP_ATOMIC); if (!kcore_mem) - panic("%s: kmalloc failed\n", __FUNCTION__); + panic("%s: kmalloc failed\n", __func__); /* must stay under 32 bits */ if ( 0xfffffffful - (unsigned long)__va(base) < size) { diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index c0f5cff77035..c5ac532a0161 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -38,11 +38,11 @@ #include <linux/nodemask.h> #include <linux/module.h> #include <linux/poison.h> +#include <linux/lmb.h> #include <asm/pgalloc.h> #include <asm/page.h> #include <asm/prom.h> -#include <asm/lmb.h> #include <asm/rtas.h> #include <asm/io.h> #include <asm/mmu_context.h> @@ -72,8 +72,8 @@ #warning TASK_SIZE is smaller than it needs to be. #endif -/* max amount of RAM to use */ -unsigned long __max_memory; +phys_addr_t memstart_addr = ~0; +phys_addr_t kernstart_addr; void free_initmem(void) { @@ -122,7 +122,7 @@ static int __init setup_kcore(void) /* GFP_ATOMIC to avoid might_sleep warnings during boot */ kcore_mem = kmalloc(sizeof(struct kcore_list), GFP_ATOMIC); if (!kcore_mem) - panic("%s: kmalloc failed\n", __FUNCTION__); + panic("%s: kmalloc failed\n", __func__); kclist_add(kcore_mem, __va(base), size); } diff --git a/arch/powerpc/mm/lmb.c b/arch/powerpc/mm/lmb.c deleted file mode 100644 index 4ce23bcf8a57..000000000000 --- a/arch/powerpc/mm/lmb.c +++ /dev/null @@ -1,357 +0,0 @@ -/* - * Procedures for maintaining information about logical memory blocks. - * - * Peter Bergner, IBM Corp. June 2001. - * Copyright (C) 2001 Peter Bergner. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/bitops.h> -#include <asm/types.h> -#include <asm/page.h> -#include <asm/prom.h> -#include <asm/lmb.h> -#ifdef CONFIG_PPC32 -#include "mmu_decl.h" /* for __max_low_memory */ -#endif - -#undef DEBUG - -#ifdef DEBUG -#include <asm/udbg.h> -#define DBG(fmt...) udbg_printf(fmt) -#else -#define DBG(fmt...) -#endif - -#define LMB_ALLOC_ANYWHERE 0 - -struct lmb lmb; - -void lmb_dump_all(void) -{ -#ifdef DEBUG - unsigned long i; - - DBG("lmb_dump_all:\n"); - DBG(" memory.cnt = 0x%lx\n", lmb.memory.cnt); - DBG(" memory.size = 0x%lx\n", lmb.memory.size); - for (i=0; i < lmb.memory.cnt ;i++) { - DBG(" memory.region[0x%x].base = 0x%lx\n", - i, lmb.memory.region[i].base); - DBG(" .size = 0x%lx\n", - lmb.memory.region[i].size); - } - - DBG("\n reserved.cnt = 0x%lx\n", lmb.reserved.cnt); - DBG(" reserved.size = 0x%lx\n", lmb.reserved.size); - for (i=0; i < lmb.reserved.cnt ;i++) { - DBG(" reserved.region[0x%x].base = 0x%lx\n", - i, lmb.reserved.region[i].base); - DBG(" .size = 0x%lx\n", - lmb.reserved.region[i].size); - } -#endif /* DEBUG */ -} - -static unsigned long __init lmb_addrs_overlap(unsigned long base1, - unsigned long size1, unsigned long base2, unsigned long size2) -{ - return ((base1 < (base2+size2)) && (base2 < (base1+size1))); -} - -static long __init lmb_addrs_adjacent(unsigned long base1, unsigned long size1, - unsigned long base2, unsigned long size2) -{ - if (base2 == base1 + size1) - return 1; - else if (base1 == base2 + size2) - return -1; - - return 0; -} - -static long __init lmb_regions_adjacent(struct lmb_region *rgn, - unsigned long r1, unsigned long r2) -{ - unsigned long base1 = rgn->region[r1].base; - unsigned long size1 = rgn->region[r1].size; - unsigned long base2 = rgn->region[r2].base; - unsigned long size2 = rgn->region[r2].size; - - return lmb_addrs_adjacent(base1, size1, base2, size2); -} - -static void __init lmb_remove_region(struct lmb_region *rgn, unsigned long r) -{ - unsigned long i; - - for (i = r; i < rgn->cnt - 1; i++) { - rgn->region[i].base = rgn->region[i + 1].base; - rgn->region[i].size = rgn->region[i + 1].size; - } - rgn->cnt--; -} - -/* Assumption: base addr of region 1 < base addr of region 2 */ -static void __init lmb_coalesce_regions(struct lmb_region *rgn, - unsigned long r1, unsigned long r2) -{ - rgn->region[r1].size += rgn->region[r2].size; - lmb_remove_region(rgn, r2); -} - -/* This routine called with relocation disabled. */ -void __init lmb_init(void) -{ - /* Create a dummy zero size LMB which will get coalesced away later. - * This simplifies the lmb_add() code below... - */ - lmb.memory.region[0].base = 0; - lmb.memory.region[0].size = 0; - lmb.memory.cnt = 1; - - /* Ditto. */ - lmb.reserved.region[0].base = 0; - lmb.reserved.region[0].size = 0; - lmb.reserved.cnt = 1; -} - -/* This routine may be called with relocation disabled. */ -void __init lmb_analyze(void) -{ - int i; - - lmb.memory.size = 0; - - for (i = 0; i < lmb.memory.cnt; i++) - lmb.memory.size += lmb.memory.region[i].size; -} - -/* This routine called with relocation disabled. */ -static long __init lmb_add_region(struct lmb_region *rgn, unsigned long base, - unsigned long size) -{ - unsigned long coalesced = 0; - long adjacent, i; - - /* First try and coalesce this LMB with another. */ - for (i=0; i < rgn->cnt; i++) { - unsigned long rgnbase = rgn->region[i].base; - unsigned long rgnsize = rgn->region[i].size; - - if ((rgnbase == base) && (rgnsize == size)) - /* Already have this region, so we're done */ - return 0; - - adjacent = lmb_addrs_adjacent(base,size,rgnbase,rgnsize); - if ( adjacent > 0 ) { - rgn->region[i].base -= size; - rgn->region[i].size += size; - coalesced++; - break; - } - else if ( adjacent < 0 ) { - rgn->region[i].size += size; - coalesced++; - break; - } - } - - if ((i < rgn->cnt-1) && lmb_regions_adjacent(rgn, i, i+1) ) { - lmb_coalesce_regions(rgn, i, i+1); - coalesced++; - } - - if (coalesced) - return coalesced; - if (rgn->cnt >= MAX_LMB_REGIONS) - return -1; - - /* Couldn't coalesce the LMB, so add it to the sorted table. */ - for (i = rgn->cnt-1; i >= 0; i--) { - if (base < rgn->region[i].base) { - rgn->region[i+1].base = rgn->region[i].base; - rgn->region[i+1].size = rgn->region[i].size; - } else { - rgn->region[i+1].base = base; - rgn->region[i+1].size = size; - break; - } - } - rgn->cnt++; - - return 0; -} - -/* This routine may be called with relocation disabled. */ -long __init lmb_add(unsigned long base, unsigned long size) -{ - struct lmb_region *_rgn = &(lmb.memory); - - /* On pSeries LPAR systems, the first LMB is our RMO region. */ - if (base == 0) - lmb.rmo_size = size; - - return lmb_add_region(_rgn, base, size); - -} - -long __init lmb_reserve(unsigned long base, unsigned long size) -{ - struct lmb_region *_rgn = &(lmb.reserved); - - BUG_ON(0 == size); - - return lmb_add_region(_rgn, base, size); -} - -long __init lmb_overlaps_region(struct lmb_region *rgn, unsigned long base, - unsigned long size) -{ - unsigned long i; - - for (i=0; i < rgn->cnt; i++) { - unsigned long rgnbase = rgn->region[i].base; - unsigned long rgnsize = rgn->region[i].size; - if ( lmb_addrs_overlap(base,size,rgnbase,rgnsize) ) { - break; - } - } - - return (i < rgn->cnt) ? i : -1; -} - -unsigned long __init lmb_alloc(unsigned long size, unsigned long align) -{ - return lmb_alloc_base(size, align, LMB_ALLOC_ANYWHERE); -} - -unsigned long __init lmb_alloc_base(unsigned long size, unsigned long align, - unsigned long max_addr) -{ - unsigned long alloc; - - alloc = __lmb_alloc_base(size, align, max_addr); - - if (alloc == 0) - panic("ERROR: Failed to allocate 0x%lx bytes below 0x%lx.\n", - size, max_addr); - - return alloc; -} - -unsigned long __init __lmb_alloc_base(unsigned long size, unsigned long align, - unsigned long max_addr) -{ - long i, j; - unsigned long base = 0; - - BUG_ON(0 == size); - -#ifdef CONFIG_PPC32 - /* On 32-bit, make sure we allocate lowmem */ - if (max_addr == LMB_ALLOC_ANYWHERE) - max_addr = __max_low_memory; -#endif - for (i = lmb.memory.cnt-1; i >= 0; i--) { - unsigned long lmbbase = lmb.memory.region[i].base; - unsigned long lmbsize = lmb.memory.region[i].size; - - if (max_addr == LMB_ALLOC_ANYWHERE) - base = _ALIGN_DOWN(lmbbase + lmbsize - size, align); - else if (lmbbase < max_addr) { - base = min(lmbbase + lmbsize, max_addr); - base = _ALIGN_DOWN(base - size, align); - } else - continue; - - while ((lmbbase <= base) && - ((j = lmb_overlaps_region(&lmb.reserved, base, size)) >= 0) ) - base = _ALIGN_DOWN(lmb.reserved.region[j].base - size, - align); - - if ((base != 0) && (lmbbase <= base)) - break; - } - - if (i < 0) - return 0; - - lmb_add_region(&lmb.reserved, base, size); - - return base; -} - -/* You must call lmb_analyze() before this. */ -unsigned long __init lmb_phys_mem_size(void) -{ - return lmb.memory.size; -} - -unsigned long __init lmb_end_of_DRAM(void) -{ - int idx = lmb.memory.cnt - 1; - - return (lmb.memory.region[idx].base + lmb.memory.region[idx].size); -} - -/* You must call lmb_analyze() after this. */ -void __init lmb_enforce_memory_limit(unsigned long memory_limit) -{ - unsigned long i, limit; - struct lmb_property *p; - - if (! memory_limit) - return; - - /* Truncate the lmb regions to satisfy the memory limit. */ - limit = memory_limit; - for (i = 0; i < lmb.memory.cnt; i++) { - if (limit > lmb.memory.region[i].size) { - limit -= lmb.memory.region[i].size; - continue; - } - - lmb.memory.region[i].size = limit; - lmb.memory.cnt = i + 1; - break; - } - - if (lmb.memory.region[0].size < lmb.rmo_size) - lmb.rmo_size = lmb.memory.region[0].size; - - /* And truncate any reserves above the limit also. */ - for (i = 0; i < lmb.reserved.cnt; i++) { - p = &lmb.reserved.region[i]; - - if (p->base > memory_limit) - p->size = 0; - else if ((p->base + p->size) > memory_limit) - p->size = memory_limit - p->base; - - if (p->size == 0) { - lmb_remove_region(&lmb.reserved, i); - i--; - } - } -} - -int __init lmb_is_reserved(unsigned long addr) -{ - int i; - - for (i = 0; i < lmb.reserved.cnt; i++) { - unsigned long upper = lmb.reserved.region[i].base + - lmb.reserved.region[i].size - 1; - if ((addr >= lmb.reserved.region[i].base) && (addr <= upper)) - return 1; - } - return 0; -} diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index be5c506779a7..d9e37f365b54 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -31,6 +31,7 @@ #include <linux/initrd.h> #include <linux/pagemap.h> #include <linux/suspend.h> +#include <linux/lmb.h> #include <asm/pgalloc.h> #include <asm/prom.h> @@ -42,9 +43,9 @@ #include <asm/machdep.h> #include <asm/btext.h> #include <asm/tlb.h> -#include <asm/lmb.h> #include <asm/sections.h> #include <asm/vdso.h> +#include <asm/fixmap.h> #include "mmu_decl.h" @@ -57,6 +58,20 @@ int init_bootmem_done; int mem_init_done; unsigned long memory_limit; +#ifdef CONFIG_HIGHMEM +pte_t *kmap_pte; +pgprot_t kmap_prot; + +EXPORT_SYMBOL(kmap_prot); +EXPORT_SYMBOL(kmap_pte); + +static inline pte_t *virt_to_kpte(unsigned long vaddr) +{ + return pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), + vaddr), vaddr), vaddr); +} +#endif + int page_is_ram(unsigned long pfn) { unsigned long paddr = (pfn << PAGE_SHIFT); @@ -95,15 +110,6 @@ EXPORT_SYMBOL(phys_mem_access_prot); #ifdef CONFIG_MEMORY_HOTPLUG -void online_page(struct page *page) -{ - ClearPageReserved(page); - init_page_count(page); - __free_page(page); - totalram_pages++; - num_physpages++; -} - #ifdef CONFIG_NUMA int memory_add_physaddr_to_nid(u64 start) { @@ -111,7 +117,7 @@ int memory_add_physaddr_to_nid(u64 start) } #endif -int __devinit arch_add_memory(int nid, u64 start, u64 size) +int arch_add_memory(int nid, u64 start, u64 size) { struct pglist_data *pgdata; struct zone *zone; @@ -175,7 +181,6 @@ void show_mem(void) printk("Mem-info:\n"); show_free_areas(); - printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); for_each_online_pgdat(pgdat) { unsigned long flags; pgdat_resize_lock(pgdat, &flags); @@ -217,9 +222,11 @@ void __init do_init_bootmem(void) unsigned long total_pages; int boot_mapsize; - max_pfn = total_pages = lmb_end_of_DRAM() >> PAGE_SHIFT; + max_low_pfn = max_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT; + total_pages = (lmb_end_of_DRAM() - memstart_addr) >> PAGE_SHIFT; #ifdef CONFIG_HIGHMEM total_pages = total_lowmem >> PAGE_SHIFT; + max_low_pfn = lowmem_end_addr >> PAGE_SHIFT; #endif /* @@ -231,7 +238,8 @@ void __init do_init_bootmem(void) start = lmb_alloc(bootmap_pages << PAGE_SHIFT, PAGE_SIZE); - boot_mapsize = init_bootmem(start >> PAGE_SHIFT, total_pages); + min_low_pfn = MEMORY_START >> PAGE_SHIFT; + boot_mapsize = init_bootmem_node(NODE_DATA(0), start >> PAGE_SHIFT, min_low_pfn, max_low_pfn); /* Add active regions with valid PFNs */ for (i = 0; i < lmb.memory.cnt; i++) { @@ -245,18 +253,18 @@ void __init do_init_bootmem(void) * present. */ #ifdef CONFIG_HIGHMEM - free_bootmem_with_active_regions(0, total_lowmem >> PAGE_SHIFT); + free_bootmem_with_active_regions(0, lowmem_end_addr >> PAGE_SHIFT); /* reserve the sections we're already using */ for (i = 0; i < lmb.reserved.cnt; i++) { unsigned long addr = lmb.reserved.region[i].base + lmb_size_bytes(&lmb.reserved, i) - 1; - if (addr < total_lowmem) + if (addr < lowmem_end_addr) reserve_bootmem(lmb.reserved.region[i].base, lmb_size_bytes(&lmb.reserved, i), BOOTMEM_DEFAULT); - else if (lmb.reserved.region[i].base < total_lowmem) { - unsigned long adjusted_size = total_lowmem - + else if (lmb.reserved.region[i].base < lowmem_end_addr) { + unsigned long adjusted_size = lowmem_end_addr - lmb.reserved.region[i].base; reserve_bootmem(lmb.reserved.region[i].base, adjusted_size, BOOTMEM_DEFAULT); @@ -309,14 +317,19 @@ void __init paging_init(void) unsigned long top_of_ram = lmb_end_of_DRAM(); unsigned long max_zone_pfns[MAX_NR_ZONES]; +#ifdef CONFIG_PPC32 + unsigned long v = __fix_to_virt(__end_of_fixed_addresses - 1); + unsigned long end = __fix_to_virt(FIX_HOLE); + + for (; v < end; v += PAGE_SIZE) + map_page(v, 0, 0); /* XXX gross */ +#endif + #ifdef CONFIG_HIGHMEM map_page(PKMAP_BASE, 0, 0); /* XXX gross */ - pkmap_page_table = pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k - (PKMAP_BASE), PKMAP_BASE), PKMAP_BASE), PKMAP_BASE); - map_page(KMAP_FIX_BEGIN, 0, 0); /* XXX gross */ - kmap_pte = pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k - (KMAP_FIX_BEGIN), KMAP_FIX_BEGIN), KMAP_FIX_BEGIN), - KMAP_FIX_BEGIN); + pkmap_page_table = virt_to_kpte(PKMAP_BASE); + + kmap_pte = virt_to_kpte(__fix_to_virt(FIX_KMAP_BEGIN)); kmap_prot = PAGE_KERNEL; #endif /* CONFIG_HIGHMEM */ @@ -326,7 +339,7 @@ void __init paging_init(void) (top_of_ram - total_ram) >> 20); memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); #ifdef CONFIG_HIGHMEM - max_zone_pfns[ZONE_DMA] = total_lowmem >> PAGE_SHIFT; + max_zone_pfns[ZONE_DMA] = lowmem_end_addr >> PAGE_SHIFT; max_zone_pfns[ZONE_HIGHMEM] = top_of_ram >> PAGE_SHIFT; #else max_zone_pfns[ZONE_DMA] = top_of_ram >> PAGE_SHIFT; @@ -381,7 +394,7 @@ void __init mem_init(void) { unsigned long pfn, highmem_mapnr; - highmem_mapnr = total_lowmem >> PAGE_SHIFT; + highmem_mapnr = lowmem_end_addr >> PAGE_SHIFT; for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) { struct page *page = pfn_to_page(pfn); if (lmb_is_reserved(pfn << PAGE_SHIFT)) diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h index ebfd13dc9d19..04802252a64f 100644 --- a/arch/powerpc/mm/mmu_decl.h +++ b/arch/powerpc/mm/mmu_decl.h @@ -48,9 +48,11 @@ extern unsigned int num_tlbcam_entries; extern unsigned long ioremap_bot; extern unsigned long __max_low_memory; -extern unsigned long __initial_memory_limit; +extern phys_addr_t __initial_memory_limit_addr; extern unsigned long total_memory; extern unsigned long total_lowmem; +extern phys_addr_t memstart_addr; +extern phys_addr_t lowmem_end_addr; /* ...and now those things that may be slightly different between processor * architectures. -- Dan diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index a300d254aac6..dc704da363eb 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -17,8 +17,10 @@ #include <linux/nodemask.h> #include <linux/cpu.h> #include <linux/notifier.h> +#include <linux/lmb.h> +#include <linux/of.h> #include <asm/sparsemem.h> -#include <asm/lmb.h> +#include <asm/prom.h> #include <asm/system.h> #include <asm/smp.h> diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index ac3390f81900..80d1babb230d 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -29,6 +29,7 @@ #include <asm/pgtable.h> #include <asm/pgalloc.h> +#include <asm/fixmap.h> #include <asm/io.h> #include "mmu_decl.h" @@ -281,12 +282,13 @@ int map_page(unsigned long va, phys_addr_t pa, int flags) */ void __init mapin_ram(void) { - unsigned long v, p, s, f; + unsigned long v, s, f; + phys_addr_t p; int ktext; s = mmu_mapin_ram(); v = KERNELBASE + s; - p = PPC_MEMSTART + s; + p = memstart_addr + s; for (; s < total_lowmem; s += PAGE_SIZE) { ktext = ((char *) v >= _stext && (char *) v < etext); f = ktext ?_PAGE_RAM_TEXT : _PAGE_RAM; @@ -386,3 +388,25 @@ void kernel_map_pages(struct page *page, int numpages, int enable) change_page_attr(page, numpages, enable ? PAGE_KERNEL : __pgprot(0)); } #endif /* CONFIG_DEBUG_PAGEALLOC */ + +static int fixmaps; +unsigned long FIXADDR_TOP = 0xfffff000; +EXPORT_SYMBOL(FIXADDR_TOP); + +void __set_fixmap (enum fixed_addresses idx, phys_addr_t phys, pgprot_t flags) +{ + unsigned long address = __fix_to_virt(idx); + + if (idx >= __end_of_fixed_addresses) { + BUG(); + return; + } + + map_page(address, phys, flags); + fixmaps++; +} + +void __this_fixmap_does_not_exist(void) +{ + WARN_ON(1); +} diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c index 5c45d474cfcc..cef9f156874b 100644 --- a/arch/powerpc/mm/ppc_mmu_32.c +++ b/arch/powerpc/mm/ppc_mmu_32.c @@ -26,11 +26,11 @@ #include <linux/mm.h> #include <linux/init.h> #include <linux/highmem.h> +#include <linux/lmb.h> #include <asm/prom.h> #include <asm/mmu.h> #include <asm/machdep.h> -#include <asm/lmb.h> #include "mmu_decl.h" @@ -82,7 +82,6 @@ unsigned long __init mmu_mapin_ram(void) #else unsigned long tot, bl, done; unsigned long max_size = (256<<20); - unsigned long align; if (__map_without_bats) { printk(KERN_DEBUG "RAM mapped without BATs\n"); @@ -93,19 +92,13 @@ unsigned long __init mmu_mapin_ram(void) /* Make sure we don't map a block larger than the smallest alignment of the physical address. */ - /* alignment of PPC_MEMSTART */ - align = ~(PPC_MEMSTART-1) & PPC_MEMSTART; - /* set BAT block size to MIN(max_size, align) */ - if (align && align < max_size) - max_size = align; - tot = total_lowmem; for (bl = 128<<10; bl < max_size; bl <<= 1) { if (bl * 2 > tot) break; } - setbat(2, KERNELBASE, PPC_MEMSTART, bl, _PAGE_RAM); + setbat(2, KERNELBASE, 0, bl, _PAGE_RAM); done = (unsigned long)bat_addrs[2].limit - KERNELBASE + 1; if ((done < tot) && !bat_addrs[3].limit) { /* use BAT3 to cover a bit more */ @@ -113,7 +106,7 @@ unsigned long __init mmu_mapin_ram(void) for (bl = 128<<10; bl < max_size; bl <<= 1) if (bl * 2 > tot) break; - setbat(3, KERNELBASE+done, PPC_MEMSTART+done, bl, _PAGE_RAM); + setbat(3, KERNELBASE+done, done, bl, _PAGE_RAM); done = (unsigned long)bat_addrs[3].limit - KERNELBASE + 1; } @@ -240,7 +233,7 @@ void __init MMU_init_hw(void) */ if ( ppc_md.progress ) ppc_md.progress("hash:find piece", 0x322); Hash = __va(lmb_alloc_base(Hash_size, Hash_size, - __initial_memory_limit)); + __initial_memory_limit_addr)); cacheable_memzero(Hash, Hash_size); _SDR1 = __pa(Hash) | SDR1_LOW_BITS; diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c index 47b06bad24ad..906daeda59a8 100644 --- a/arch/powerpc/mm/slb.c +++ b/arch/powerpc/mm/slb.c @@ -124,6 +124,12 @@ void slb_flush_and_rebolt(void) ksp_vsid_data = get_slb_shadow()->save_area[2].vsid; } + /* + * We can't take a PMU exception in the following code, so hard + * disable interrupts. + */ + hard_irq_disable(); + /* We need to do this all in asm, so we're sure we don't touch * the stack between the slbia and rebolting it. */ asm volatile("isync\n" diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c index 50448d5de9d2..efbbd13d93e5 100644 --- a/arch/powerpc/mm/stab.c +++ b/arch/powerpc/mm/stab.c @@ -12,12 +12,14 @@ * 2 of the License, or (at your option) any later version. */ +#include <linux/lmb.h> + #include <asm/pgtable.h> #include <asm/mmu.h> #include <asm/mmu_context.h> #include <asm/paca.h> #include <asm/cputable.h> -#include <asm/lmb.h> +#include <asm/prom.h> #include <asm/abs_addr.h> #include <asm/firmware.h> #include <asm/iseries/hv_call.h> diff --git a/arch/powerpc/oprofile/cell/spu_task_sync.c b/arch/powerpc/oprofile/cell/spu_task_sync.c index 257b13cb18af..2a9b4a049329 100644 --- a/arch/powerpc/oprofile/cell/spu_task_sync.c +++ b/arch/powerpc/oprofile/cell/spu_task_sync.c @@ -68,7 +68,7 @@ static struct cached_info *get_cached_info(struct spu *the_spu, int spu_num) if (spu_num >= num_spu_nodes) { printk(KERN_ERR "SPU_PROF: " "%s, line %d: Invalid index %d into spu info cache\n", - __FUNCTION__, __LINE__, spu_num); + __func__, __LINE__, spu_num); ret_info = NULL; goto out; } @@ -115,7 +115,7 @@ prepare_cached_spu_info(struct spu *spu, unsigned long objectId) if (!info) { printk(KERN_ERR "SPU_PROF: " "%s, line %d: create vma_map failed\n", - __FUNCTION__, __LINE__); + __func__, __LINE__); retval = -ENOMEM; goto err_alloc; } @@ -123,7 +123,7 @@ prepare_cached_spu_info(struct spu *spu, unsigned long objectId) if (!new_map) { printk(KERN_ERR "SPU_PROF: " "%s, line %d: create vma_map failed\n", - __FUNCTION__, __LINE__); + __func__, __LINE__); retval = -ENOMEM; goto err_alloc; } @@ -171,7 +171,7 @@ static int release_cached_info(int spu_index) printk(KERN_ERR "SPU_PROF: " "%s, line %d: " "Invalid index %d into spu info cache\n", - __FUNCTION__, __LINE__, spu_index); + __func__, __LINE__, spu_index); goto out; } end = spu_index + 1; @@ -273,7 +273,7 @@ fail_no_image_cookie: printk(KERN_ERR "SPU_PROF: " "%s, line %d: Cannot find dcookie for SPU binary\n", - __FUNCTION__, __LINE__); + __func__, __LINE__); goto out; } @@ -467,7 +467,7 @@ int spu_sync_stop(void) if (ret) { printk(KERN_ERR "SPU_PROF: " "%s, line %d: spu_switch_event_unregister returned %d\n", - __FUNCTION__, __LINE__, ret); + __func__, __LINE__, ret); goto out; } diff --git a/arch/powerpc/oprofile/cell/vma_map.c b/arch/powerpc/oprofile/cell/vma_map.c index 76ec1d16aef7..fff66662d021 100644 --- a/arch/powerpc/oprofile/cell/vma_map.c +++ b/arch/powerpc/oprofile/cell/vma_map.c @@ -72,7 +72,7 @@ vma_map_add(struct vma_to_fileoffset_map *map, unsigned int vma, kzalloc(sizeof(struct vma_to_fileoffset_map), GFP_KERNEL); if (!new) { printk(KERN_ERR "SPU_PROF: %s, line %d: malloc failed\n", - __FUNCTION__, __LINE__); + __func__, __LINE__); vma_map_free(map); return NULL; } @@ -92,7 +92,7 @@ vma_map_add(struct vma_to_fileoffset_map *map, unsigned int vma, * A pointer to the first vma_map in the generated list * of vma_maps is returned. */ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu, - unsigned long spu_elf_start) + unsigned long __spu_elf_start) { static const unsigned char expected[EI_PAD] = { [EI_MAG0] = ELFMAG0, @@ -107,9 +107,11 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu, int grd_val; struct vma_to_fileoffset_map *map = NULL; + void __user *spu_elf_start = (void __user *)__spu_elf_start; struct spu_overlay_info ovly; unsigned int overlay_tbl_offset = -1; - unsigned long phdr_start, shdr_start; + Elf32_Phdr __user *phdr_start; + Elf32_Shdr __user *shdr_start; Elf32_Ehdr ehdr; Elf32_Phdr phdr; Elf32_Shdr shdr, shdr_str; @@ -121,30 +123,30 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu, unsigned int ovly_buf_table_sym = 0; unsigned int ovly_table_end_sym = 0; unsigned int ovly_buf_table_end_sym = 0; - unsigned long ovly_table; + struct spu_overlay_info __user *ovly_table; unsigned int n_ovlys; /* Get and validate ELF header. */ - if (copy_from_user(&ehdr, (void *) spu_elf_start, sizeof (ehdr))) + if (copy_from_user(&ehdr, spu_elf_start, sizeof (ehdr))) goto fail; if (memcmp(ehdr.e_ident, expected, EI_PAD) != 0) { printk(KERN_ERR "SPU_PROF: " "%s, line %d: Unexpected e_ident parsing SPU ELF\n", - __FUNCTION__, __LINE__); + __func__, __LINE__); goto fail; } if (ehdr.e_machine != EM_SPU) { printk(KERN_ERR "SPU_PROF: " "%s, line %d: Unexpected e_machine parsing SPU ELF\n", - __FUNCTION__, __LINE__); + __func__, __LINE__); goto fail; } if (ehdr.e_type != ET_EXEC) { printk(KERN_ERR "SPU_PROF: " "%s, line %d: Unexpected e_type parsing SPU ELF\n", - __FUNCTION__, __LINE__); + __func__, __LINE__); goto fail; } phdr_start = spu_elf_start + ehdr.e_phoff; @@ -152,9 +154,7 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu, /* Traverse program headers. */ for (i = 0; i < ehdr.e_phnum; i++) { - if (copy_from_user(&phdr, - (void *) (phdr_start + i * sizeof(phdr)), - sizeof(phdr))) + if (copy_from_user(&phdr, phdr_start + i, sizeof(phdr))) goto fail; if (phdr.p_type != PT_LOAD) @@ -171,9 +171,7 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu, pr_debug("SPU_PROF: Created non-overlay maps\n"); /* Traverse section table and search for overlay-related symbols. */ for (i = 0; i < ehdr.e_shnum; i++) { - if (copy_from_user(&shdr, - (void *) (shdr_start + i * sizeof(shdr)), - sizeof(shdr))) + if (copy_from_user(&shdr, shdr_start + i, sizeof(shdr))) goto fail; if (shdr.sh_type != SHT_SYMTAB) @@ -182,8 +180,7 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu, continue; if (copy_from_user(&shdr_str, - (void *) (shdr_start + shdr.sh_link * - sizeof(shdr)), + shdr_start + shdr.sh_link, sizeof(shdr))) goto fail; @@ -191,15 +188,15 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu, goto fail;; for (j = 0; j < shdr.sh_size / sizeof (sym); j++) { - if (copy_from_user(&sym, (void *) (spu_elf_start + - shdr.sh_offset + j * - sizeof (sym)), + if (copy_from_user(&sym, spu_elf_start + + shdr.sh_offset + + j * sizeof (sym), sizeof (sym))) goto fail; - if (copy_from_user(name, (void *) - (spu_elf_start + shdr_str.sh_offset + - sym.st_name), + if (copy_from_user(name, + spu_elf_start + shdr_str.sh_offset + + sym.st_name, 20)) goto fail; @@ -235,7 +232,7 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu, if (overlay_tbl_offset < 0) { printk(KERN_ERR "SPU_PROF: " "%s, line %d: Error finding SPU overlay table\n", - __FUNCTION__, __LINE__); + __func__, __LINE__); goto fail; } ovly_table = spu_elf_start + overlay_tbl_offset; @@ -245,9 +242,7 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu, /* Traverse overlay table. */ for (i = 0; i < n_ovlys; i++) { - if (copy_from_user(&ovly, (void *) - (ovly_table + i * sizeof (ovly)), - sizeof (ovly))) + if (copy_from_user(&ovly, ovly_table + i, sizeof (ovly))) goto fail; /* The ovly.vma/size/offset arguments are analogous to the same diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index 13929771bee7..5ff4de3eb3be 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -216,7 +216,7 @@ static void pm_rtas_reset_signals(u32 node) * failure to stop OProfile. */ printk(KERN_WARNING "%s: rtas returned: %d\n", - __FUNCTION__, ret); + __func__, ret); } static int pm_rtas_activate_signals(u32 node, u32 count) @@ -255,7 +255,7 @@ static int pm_rtas_activate_signals(u32 node, u32 count) if (unlikely(ret)) { printk(KERN_WARNING "%s: rtas returned: %d\n", - __FUNCTION__, ret); + __func__, ret); return -EIO; } } @@ -560,7 +560,7 @@ static int cell_reg_setup(struct op_counter_config *ctr, if (unlikely(spu_rtas_token == RTAS_UNKNOWN_SERVICE)) { printk(KERN_ERR "%s: rtas token ibm,cbe-spu-perftools unknown\n", - __FUNCTION__); + __func__); return -EIO; } } @@ -576,7 +576,7 @@ static int cell_reg_setup(struct op_counter_config *ctr, if (unlikely(pm_rtas_token == RTAS_UNKNOWN_SERVICE)) { printk(KERN_ERR "%s: rtas token ibm,cbe-perftools unknown\n", - __FUNCTION__); + __func__); return -EIO; } @@ -853,7 +853,7 @@ static int pm_rtas_activate_spu_profiling(u32 node) if (unlikely(ret)) { printk(KERN_WARNING "%s: rtas returned: %d\n", - __FUNCTION__, ret); + __func__, ret); return -EIO; } @@ -949,7 +949,7 @@ static int cell_global_start_spu(struct op_counter_config *ctr) if (unlikely(ret != 0)) { printk(KERN_ERR "%s: rtas call ibm,cbe-spu-perftools failed, return = %d\n", - __FUNCTION__, ret); + __func__, ret); rtas_error = -EIO; goto out; } @@ -1061,7 +1061,7 @@ static void cell_global_stop_spu(void) if (unlikely(rtn_value != 0)) { printk(KERN_ERR "%s: rtas call ibm,cbe-spu-perftools failed, return = %d\n", - __FUNCTION__, rtn_value); + __func__, rtn_value); } /* Deactivate the signals */ @@ -1151,7 +1151,7 @@ static void cell_handle_interrupt(struct pt_regs *regs, for (i = 0; i < num_counters; ++i) { if ((interrupt_mask & CBE_PM_CTR_OVERFLOW_INTR(i)) && ctr[i].enabled) { - oprofile_add_pc(pc, is_kernel, i); + oprofile_add_ext_sample(pc, regs, i, is_kernel); cbe_write_ctr(cpu, i, reset_value[i]); } } diff --git a/arch/powerpc/platforms/40x/ep405.c b/arch/powerpc/platforms/40x/ep405.c index 13d1345026da..ae2e7f67c18e 100644 --- a/arch/powerpc/platforms/40x/ep405.c +++ b/arch/powerpc/platforms/40x/ep405.c @@ -29,6 +29,7 @@ #include <asm/time.h> #include <asm/uic.h> #include <asm/pci-bridge.h> +#include <asm/ppc4xx.h> static struct device_node *bcsr_node; static void __iomem *bcsr_regs; @@ -119,5 +120,6 @@ define_machine(ep405) { .progress = udbg_progress, .init_IRQ = uic_init_tree, .get_irq = uic_get_irq, + .restart = ppc4xx_reset_system, .calibrate_decr = generic_calibrate_decr, }; diff --git a/arch/powerpc/platforms/40x/kilauea.c b/arch/powerpc/platforms/40x/kilauea.c index f9206a7fede0..1dd24ffc0dc1 100644 --- a/arch/powerpc/platforms/40x/kilauea.c +++ b/arch/powerpc/platforms/40x/kilauea.c @@ -1,7 +1,7 @@ /* * Kilauea board specific routines * - * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de> + * Copyright 2007-2008 DENX Software Engineering, Stefan Roese <sr@denx.de> * * Based on the Walnut code by * Josh Boyer <jwboyer@linux.vnet.ibm.com> @@ -20,6 +20,7 @@ #include <asm/time.h> #include <asm/uic.h> #include <asm/pci-bridge.h> +#include <asm/ppc4xx.h> static __initdata struct of_device_id kilauea_of_bus[] = { { .compatible = "ibm,plb4", }, @@ -54,5 +55,6 @@ define_machine(kilauea) { .progress = udbg_progress, .init_IRQ = uic_init_tree, .get_irq = uic_get_irq, + .restart = ppc4xx_reset_system, .calibrate_decr = generic_calibrate_decr, }; diff --git a/arch/powerpc/platforms/40x/makalu.c b/arch/powerpc/platforms/40x/makalu.c index 4e4df72fc9cd..a6a1d6017b71 100644 --- a/arch/powerpc/platforms/40x/makalu.c +++ b/arch/powerpc/platforms/40x/makalu.c @@ -20,6 +20,7 @@ #include <asm/time.h> #include <asm/uic.h> #include <asm/pci-bridge.h> +#include <asm/ppc4xx.h> static __initdata struct of_device_id makalu_of_bus[] = { { .compatible = "ibm,plb4", }, @@ -54,5 +55,6 @@ define_machine(makalu) { .progress = udbg_progress, .init_IRQ = uic_init_tree, .get_irq = uic_get_irq, + .restart = ppc4xx_reset_system, .calibrate_decr = generic_calibrate_decr, }; diff --git a/arch/powerpc/platforms/40x/virtex.c b/arch/powerpc/platforms/40x/virtex.c index 0422590040db..fc7fb001276c 100644 --- a/arch/powerpc/platforms/40x/virtex.c +++ b/arch/powerpc/platforms/40x/virtex.c @@ -14,6 +14,7 @@ #include <asm/prom.h> #include <asm/time.h> #include <asm/xilinx_intc.h> +#include <asm/ppc4xx.h> static struct of_device_id xilinx_of_bus_ids[] __initdata = { { .compatible = "xlnx,plb-v46-1.00.a", }, @@ -48,5 +49,6 @@ define_machine(virtex) { .probe = virtex_probe, .init_IRQ = xilinx_intc_init_tree, .get_irq = xilinx_intc_get_irq, + .restart = ppc4xx_reset_system, .calibrate_decr = generic_calibrate_decr, }; diff --git a/arch/powerpc/platforms/40x/walnut.c b/arch/powerpc/platforms/40x/walnut.c index b8b257efeb77..335df91fbee5 100644 --- a/arch/powerpc/platforms/40x/walnut.c +++ b/arch/powerpc/platforms/40x/walnut.c @@ -26,6 +26,7 @@ #include <asm/time.h> #include <asm/uic.h> #include <asm/pci-bridge.h> +#include <asm/ppc4xx.h> static __initdata struct of_device_id walnut_of_bus[] = { { .compatible = "ibm,plb3", }, @@ -61,5 +62,6 @@ define_machine(walnut) { .progress = udbg_progress, .init_IRQ = uic_init_tree, .get_irq = uic_get_irq, - .calibrate_decr = generic_calibrate_decr, + .restart = ppc4xx_reset_system, + .calibrate_decr = generic_calibrate_decr, }; diff --git a/arch/powerpc/platforms/44x/44x.h b/arch/powerpc/platforms/44x/44x.h index 42eabf87fea3..dbc4d2b4301a 100644 --- a/arch/powerpc/platforms/44x/44x.h +++ b/arch/powerpc/platforms/44x/44x.h @@ -3,6 +3,5 @@ extern u8 as1_readb(volatile u8 __iomem *addr); extern void as1_writeb(u8 data, volatile u8 __iomem *addr); -extern void ppc44x_reset_system(char *cmd); #endif /* __POWERPC_PLATFORMS_44X_44X_H */ diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 1bfb2191010a..6abe91357eee 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -67,6 +67,25 @@ config WARP See http://www.pikatechnologies.com/ and follow the "PIKA for Computer Telephony Developers" link for more information. +config CANYONLANDS + bool "Canyonlands" + depends on 44x + default n + select 460EX + select PCI + select PPC4xx_PCI_EXPRESS + help + This option enables support for the AMCC PPC460EX evaluation board. + +config YOSEMITE + bool "Yosemite" + depends on 44x + default n + select 440EP + select PCI + help + This option enables support for the AMCC PPC440EP evaluation board. + #config LUAN # bool "Luan" # depends on 44x @@ -122,6 +141,14 @@ config 440SPe bool select IBM_NEW_EMAC_EMAC4 +config 460EX + bool + select PPC_FPU + select IBM_NEW_EMAC_EMAC4 + select IBM_NEW_EMAC_RGMII + select IBM_NEW_EMAC_ZMII + select IBM_NEW_EMAC_TAH + # 44x errata/workaround config symbols, selected by the CPU models above config IBM440EP_ERR42 bool diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile index 0864d4f1cbc2..774165f9acdd 100644 --- a/arch/powerpc/platforms/44x/Makefile +++ b/arch/powerpc/platforms/44x/Makefile @@ -1,9 +1,11 @@ -obj-$(CONFIG_44x) := misc_44x.o +obj-$(CONFIG_44x) := misc_44x.o idle.o obj-$(CONFIG_EBONY) += ebony.o obj-$(CONFIG_TAISHAN) += taishan.o obj-$(CONFIG_BAMBOO) += bamboo.o +obj-$(CONFIG_YOSEMITE) += bamboo.o obj-$(CONFIG_SEQUOIA) += sequoia.o obj-$(CONFIG_KATMAI) += katmai.o obj-$(CONFIG_RAINIER) += rainier.o obj-$(CONFIG_WARP) += warp.o obj-$(CONFIG_WARP) += warp-nand.o +obj-$(CONFIG_CANYONLANDS) += canyonlands.o diff --git a/arch/powerpc/platforms/44x/bamboo.c b/arch/powerpc/platforms/44x/bamboo.c index fb9a22a7e8d0..cef169e95156 100644 --- a/arch/powerpc/platforms/44x/bamboo.c +++ b/arch/powerpc/platforms/44x/bamboo.c @@ -22,8 +22,7 @@ #include <asm/time.h> #include <asm/uic.h> #include <asm/pci-bridge.h> - -#include "44x.h" +#include <asm/ppc4xx.h> static __initdata struct of_device_id bamboo_of_bus[] = { { .compatible = "ibm,plb4", }, @@ -53,11 +52,11 @@ static int __init bamboo_probe(void) } define_machine(bamboo) { - .name = "Bamboo", - .probe = bamboo_probe, - .progress = udbg_progress, - .init_IRQ = uic_init_tree, - .get_irq = uic_get_irq, - .restart = ppc44x_reset_system, + .name = "Bamboo", + .probe = bamboo_probe, + .progress = udbg_progress, + .init_IRQ = uic_init_tree, + .get_irq = uic_get_irq, + .restart = ppc4xx_reset_system, .calibrate_decr = generic_calibrate_decr, }; diff --git a/arch/powerpc/platforms/44x/canyonlands.c b/arch/powerpc/platforms/44x/canyonlands.c new file mode 100644 index 000000000000..3949289f51df --- /dev/null +++ b/arch/powerpc/platforms/44x/canyonlands.c @@ -0,0 +1,63 @@ +/* + * Canyonlands board specific routines + * + * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de> + * + * Based on the Katmai code by + * Benjamin Herrenschmidt <benh@kernel.crashing.org> + * Copyright 2007 IBM Corp. + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * Copyright 2007 IBM Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/init.h> +#include <linux/of_platform.h> + +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/time.h> +#include <asm/uic.h> +#include <asm/pci-bridge.h> +#include <asm/ppc4xx.h> + +static __initdata struct of_device_id canyonlands_of_bus[] = { + { .compatible = "ibm,plb4", }, + { .compatible = "ibm,opb", }, + { .compatible = "ibm,ebc", }, + {}, +}; + +static int __init canyonlands_device_probe(void) +{ + of_platform_bus_probe(NULL, canyonlands_of_bus, NULL); + + return 0; +} +machine_device_initcall(canyonlands, canyonlands_device_probe); + +static int __init canyonlands_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (!of_flat_dt_is_compatible(root, "amcc,canyonlands")) + return 0; + + ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC; + + return 1; +} + +define_machine(canyonlands) { + .name = "Canyonlands", + .probe = canyonlands_probe, + .progress = udbg_progress, + .init_IRQ = uic_init_tree, + .get_irq = uic_get_irq, + .restart = ppc4xx_reset_system, + .calibrate_decr = generic_calibrate_decr, +}; diff --git a/arch/powerpc/platforms/44x/ebony.c b/arch/powerpc/platforms/44x/ebony.c index 1a8d467bff85..a0e8fe4662f6 100644 --- a/arch/powerpc/platforms/44x/ebony.c +++ b/arch/powerpc/platforms/44x/ebony.c @@ -26,8 +26,7 @@ #include <asm/time.h> #include <asm/uic.h> #include <asm/pci-bridge.h> - -#include "44x.h" +#include <asm/ppc4xx.h> static __initdata struct of_device_id ebony_of_bus[] = { { .compatible = "ibm,plb4", }, @@ -66,6 +65,6 @@ define_machine(ebony) { .progress = udbg_progress, .init_IRQ = uic_init_tree, .get_irq = uic_get_irq, - .restart = ppc44x_reset_system, + .restart = ppc4xx_reset_system, .calibrate_decr = generic_calibrate_decr, }; diff --git a/arch/powerpc/platforms/44x/idle.c b/arch/powerpc/platforms/44x/idle.c new file mode 100644 index 000000000000..7a81f921fef9 --- /dev/null +++ b/arch/powerpc/platforms/44x/idle.c @@ -0,0 +1,67 @@ +/* + * Copyright 2008 IBM Corp. + * + * Based on arch/powerpc/platforms/pasemi/idle.c: + * Copyright (C) 2006-2007 PA Semi, Inc + * + * Added by: Jerone Young <jyoung5@us.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/of.h> +#include <linux/kernel.h> +#include <asm/machdep.h> + +static int mode_spin; + +static void ppc44x_idle(void) +{ + unsigned long msr_save; + + msr_save = mfmsr(); + /* set wait state MSR */ + mtmsr(msr_save|MSR_WE|MSR_EE|MSR_CE|MSR_DE); + isync(); + /* return to initial state */ + mtmsr(msr_save); + isync(); +} + +int __init ppc44x_idle_init(void) +{ + if (!mode_spin) { + /* If we are not setting spin mode + then we set to wait mode */ + ppc_md.power_save = &ppc44x_idle; + } + + return 0; +} + +arch_initcall(ppc44x_idle_init); + +static int __init idle_param(char *p) +{ + + if (!strcmp("spin", p)) { + mode_spin = 1; + ppc_md.power_save = NULL; + } + + return 0; +} + +early_param("idle", idle_param); diff --git a/arch/powerpc/platforms/44x/katmai.c b/arch/powerpc/platforms/44x/katmai.c index 11134121f272..44f4b3a00ced 100644 --- a/arch/powerpc/platforms/44x/katmai.c +++ b/arch/powerpc/platforms/44x/katmai.c @@ -22,8 +22,7 @@ #include <asm/time.h> #include <asm/uic.h> #include <asm/pci-bridge.h> - -#include "44x.h" +#include <asm/ppc4xx.h> static __initdata struct of_device_id katmai_of_bus[] = { { .compatible = "ibm,plb4", }, @@ -58,6 +57,6 @@ define_machine(katmai) { .progress = udbg_progress, .init_IRQ = uic_init_tree, .get_irq = uic_get_irq, - .restart = ppc44x_reset_system, + .restart = ppc4xx_reset_system, .calibrate_decr = generic_calibrate_decr, }; diff --git a/arch/powerpc/platforms/44x/misc_44x.S b/arch/powerpc/platforms/44x/misc_44x.S index 3bce71d5d756..dc12b8009e48 100644 --- a/arch/powerpc/platforms/44x/misc_44x.S +++ b/arch/powerpc/platforms/44x/misc_44x.S @@ -44,14 +44,3 @@ _GLOBAL(as1_writeb) sync isync blr - -/* - * void ppc44x_reset_system(char *cmd) - * - * At present, this routine just applies a system reset. - */ -_GLOBAL(ppc44x_reset_system) - mfspr r13,SPRN_DBCR0 - oris r13,r13,DBCR0_RST_SYSTEM@h - mtspr SPRN_DBCR0,r13 - b . /* Just in case the reset doesn't work */ diff --git a/arch/powerpc/platforms/44x/rainier.c b/arch/powerpc/platforms/44x/rainier.c index a7fae1cf69c1..4f1ff84c4b63 100644 --- a/arch/powerpc/platforms/44x/rainier.c +++ b/arch/powerpc/platforms/44x/rainier.c @@ -22,7 +22,7 @@ #include <asm/time.h> #include <asm/uic.h> #include <asm/pci-bridge.h> -#include "44x.h" +#include <asm/ppc4xx.h> static __initdata struct of_device_id rainier_of_bus[] = { { .compatible = "ibm,plb4", }, @@ -57,6 +57,6 @@ define_machine(rainier) { .progress = udbg_progress, .init_IRQ = uic_init_tree, .get_irq = uic_get_irq, - .restart = ppc44x_reset_system, + .restart = ppc4xx_reset_system, .calibrate_decr = generic_calibrate_decr, }; diff --git a/arch/powerpc/platforms/44x/sequoia.c b/arch/powerpc/platforms/44x/sequoia.c index d279db42c896..49eb73daacdf 100644 --- a/arch/powerpc/platforms/44x/sequoia.c +++ b/arch/powerpc/platforms/44x/sequoia.c @@ -23,7 +23,7 @@ #include <asm/uic.h> #include <asm/pci-bridge.h> -#include "44x.h" +#include <asm/ppc4xx.h> static __initdata struct of_device_id sequoia_of_bus[] = { { .compatible = "ibm,plb4", }, @@ -58,6 +58,6 @@ define_machine(sequoia) { .progress = udbg_progress, .init_IRQ = uic_init_tree, .get_irq = uic_get_irq, - .restart = ppc44x_reset_system, + .restart = ppc4xx_reset_system, .calibrate_decr = generic_calibrate_decr, }; diff --git a/arch/powerpc/platforms/44x/taishan.c b/arch/powerpc/platforms/44x/taishan.c index 28ab7e2e02c3..49c78b2098b4 100644 --- a/arch/powerpc/platforms/44x/taishan.c +++ b/arch/powerpc/platforms/44x/taishan.c @@ -29,8 +29,7 @@ #include <asm/time.h> #include <asm/uic.h> #include <asm/pci-bridge.h> - -#include "44x.h" +#include <asm/ppc4xx.h> static __initdata struct of_device_id taishan_of_bus[] = { { .compatible = "ibm,plb4", }, @@ -68,6 +67,6 @@ define_machine(taishan) { .progress = udbg_progress, .init_IRQ = uic_init_tree, .get_irq = uic_get_irq, - .restart = ppc44x_reset_system, + .restart = ppc4xx_reset_system, .calibrate_decr = generic_calibrate_decr, }; diff --git a/arch/powerpc/platforms/44x/warp-nand.c b/arch/powerpc/platforms/44x/warp-nand.c index 84ab78ff8c03..9150318cfc56 100644 --- a/arch/powerpc/platforms/44x/warp-nand.c +++ b/arch/powerpc/platforms/44x/warp-nand.c @@ -11,6 +11,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> #include <linux/mtd/ndfc.h> +#include <asm/machdep.h> #ifdef CONFIG_MTD_NAND_NDFC @@ -100,6 +101,6 @@ static int warp_setup_nand_flash(void) return 0; } -device_initcall(warp_setup_nand_flash); +machine_device_initcall(warp, warp_setup_nand_flash); #endif diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c index da5b7b7599db..39cf6150a72b 100644 --- a/arch/powerpc/platforms/44x/warp.c +++ b/arch/powerpc/platforms/44x/warp.c @@ -18,9 +18,7 @@ #include <asm/udbg.h> #include <asm/time.h> #include <asm/uic.h> - -#include "44x.h" - +#include <asm/ppc4xx.h> static __initdata struct of_device_id warp_of_bus[] = { { .compatible = "ibm,plb4", }, @@ -49,7 +47,7 @@ define_machine(warp) { .progress = udbg_progress, .init_IRQ = uic_init_tree, .get_irq = uic_get_irq, - .restart = ppc44x_reset_system, + .restart = ppc4xx_reset_system, .calibrate_decr = generic_calibrate_decr, }; diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c index 956f459e175c..6d584f4e3c9a 100644 --- a/arch/powerpc/platforms/52xx/lite5200.c +++ b/arch/powerpc/platforms/52xx/lite5200.c @@ -63,7 +63,7 @@ lite5200_fix_clock_config(void) of_node_put(np); if (!cdm) { printk(KERN_ERR "%s() failed; expect abnormal behaviour\n", - __FUNCTION__); + __func__); return; } @@ -98,7 +98,7 @@ lite5200_fix_port_config(void) of_node_put(np); if (!gpio) { printk(KERN_ERR "%s() failed. expect abnormal behavior\n", - __FUNCTION__); + __func__); return; } diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c index 9aa4425d80b2..4d5fd1dbd400 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_common.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c @@ -199,6 +199,7 @@ int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv) return 0; } +EXPORT_SYMBOL(mpc52xx_set_psc_clkdiv); /** * mpc52xx_restart: ppc_md->restart hook for mpc5200 using the watchdog timer diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig index 4fad6c7bf9f1..917ac8891555 100644 --- a/arch/powerpc/platforms/82xx/Kconfig +++ b/arch/powerpc/platforms/82xx/Kconfig @@ -11,7 +11,6 @@ config MPC8272_ADS select 8260 select FSL_SOC select PQ2_ADS_PCI_PIC if PCI - select PPC_CPM_NEW_BINDING help This option enables support for the MPC8272 ADS board @@ -22,7 +21,6 @@ config PQ2FADS select 8260 select FSL_SOC select PQ2_ADS_PCI_PIC if PCI - select PPC_CPM_NEW_BINDING help This option enables support for the PQ2FADS board @@ -31,7 +29,6 @@ config EP8248E select 8272 select 8260 select FSL_SOC - select PPC_CPM_NEW_BINDING select MDIO_BITBANG help This enables support for the Embedded Planet EP8248E board. diff --git a/arch/powerpc/platforms/82xx/ep8248e.c b/arch/powerpc/platforms/82xx/ep8248e.c index ba93d8ae9b0c..d5770fdf7f09 100644 --- a/arch/powerpc/platforms/82xx/ep8248e.c +++ b/arch/powerpc/platforms/82xx/ep8248e.c @@ -138,7 +138,7 @@ static int __devinit ep8248e_mdio_probe(struct of_device *ofdev, bus->name = "ep8248e-mdio-bitbang"; bus->dev = &ofdev->dev; - bus->id = res.start; + snprintf(bus->id, MII_BUS_ID_SIZE, "%x", res.start); return mdiobus_register(bus); } diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c index 8a9c26973605..64d17b0d6455 100644 --- a/arch/powerpc/platforms/83xx/mpc837x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c @@ -39,12 +39,9 @@ static int mpc837xmds_usb_cfg(void) if (ret) return ret; /* Map BCSR area */ - np = of_find_node_by_name(NULL, "bcsr"); + np = of_find_compatible_node(NULL, NULL, "fsl,mpc837xmds-bcsr"); if (np) { - struct resource res; - - of_address_to_resource(np, 0, &res); - bcsr_regs = ioremap(res.start, res.end - res.start + 1); + bcsr_regs = of_iomap(np, 0); of_node_put(np); } if (!bcsr_regs) @@ -96,6 +93,7 @@ static void __init mpc837x_mds_setup_arch(void) static struct of_device_id mpc837x_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, {}, }; diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c index 2293ae51383d..c00356bdb1dd 100644 --- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c @@ -46,6 +46,7 @@ static void __init mpc837x_rdb_setup_arch(void) static struct of_device_id mpc837x_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, {}, }; diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h index 68065e62fc3d..88a3b5cabb18 100644 --- a/arch/powerpc/platforms/83xx/mpc83xx.h +++ b/arch/powerpc/platforms/83xx/mpc83xx.h @@ -16,6 +16,7 @@ #define MPC83XX_SCCR_USB_DRCM_10 0x00200000 #define MPC8315_SCCR_USB_MASK 0x00c00000 #define MPC8315_SCCR_USB_DRCM_11 0x00c00000 +#define MPC8315_SCCR_USB_DRCM_01 0x00400000 #define MPC837X_SCCR_USB_DRCM_11 0x00c00000 /* system i/o configuration register low */ @@ -37,6 +38,7 @@ /* USB Control Register */ #define FSL_USB2_CONTROL_OFFS 0x500 #define CONTROL_UTMI_PHY_EN 0x00000200 +#define CONTROL_REFSEL_24MHZ 0x00000040 #define CONTROL_REFSEL_48MHZ 0x00000080 #define CONTROL_PHY_CLK_SEL_ULPI 0x00000400 #define CONTROL_OTG_PORT 0x00000020 diff --git a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c index 471fdd8f4108..64bcf0a33c71 100644 --- a/arch/powerpc/platforms/83xx/usb.c +++ b/arch/powerpc/platforms/83xx/usb.c @@ -129,7 +129,7 @@ int mpc831x_usb_cfg(void) if (immr_node && of_device_is_compatible(immr_node, "fsl,mpc8315-immr")) clrsetbits_be32(immap + MPC83XX_SCCR_OFFS, MPC8315_SCCR_USB_MASK, - MPC8315_SCCR_USB_DRCM_11); + MPC8315_SCCR_USB_DRCM_01); else clrsetbits_be32(immap + MPC83XX_SCCR_OFFS, MPC83XX_SCCR_USB_MASK, @@ -164,9 +164,15 @@ int mpc831x_usb_cfg(void) /* Using on-chip PHY */ if (prop && (!strcmp(prop, "utmi_wide") || !strcmp(prop, "utmi"))) { - /* Set UTMI_PHY_EN, REFSEL to 48MHZ */ + u32 refsel; + + if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr")) + refsel = CONTROL_REFSEL_24MHZ; + else + refsel = CONTROL_REFSEL_48MHZ; + /* Set UTMI_PHY_EN and REFSEL */ out_be32(usb_regs + FSL_USB2_CONTROL_OFFS, - CONTROL_UTMI_PHY_EN | CONTROL_REFSEL_48MHZ); + CONTROL_UTMI_PHY_EN | refsel); /* Using external UPLI PHY */ } else if (prop && !strcmp(prop, "ulpi")) { /* Set PHY_CLK_SEL to ULPI */ diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 7e76ddbd5821..7ff29d53dc2d 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -19,7 +19,6 @@ config MPC8540_ADS config MPC8560_ADS bool "Freescale MPC8560 ADS" select DEFAULT_UIMAGE - select PPC_CPM_NEW_BINDING select CPM2 help This option enables support for the MPC 8560 ADS board @@ -46,6 +45,12 @@ config MPC85xx_DS help This option enables support for the MPC85xx DS (MPC8544 DS) board +config KSI8560 + bool "Emerson KSI8560" + select DEFAULT_UIMAGE + help + This option enables support for the Emerson KSI8560 board + config STX_GP3 bool "Silicon Turnkey Express GP3" help @@ -53,14 +58,12 @@ config STX_GP3 board. select CPM2 select DEFAULT_UIMAGE - select PPC_CPM_NEW_BINDING config TQM8540 bool "TQ Components TQM8540" help This option enables support for the TQ Components TQM8540 board. select DEFAULT_UIMAGE - select PPC_CPM_NEW_BINDING select TQM85xx config TQM8541 @@ -68,7 +71,6 @@ config TQM8541 help This option enables support for the TQ Components TQM8541 board. select DEFAULT_UIMAGE - select PPC_CPM_NEW_BINDING select TQM85xx select CPM2 @@ -77,7 +79,6 @@ config TQM8555 help This option enables support for the TQ Components TQM8555 board. select DEFAULT_UIMAGE - select PPC_CPM_NEW_BINDING select TQM85xx select CPM2 @@ -86,7 +87,6 @@ config TQM8560 help This option enables support for the TQ Components TQM8560 board. select DEFAULT_UIMAGE - select PPC_CPM_NEW_BINDING select TQM85xx select CPM2 @@ -99,7 +99,6 @@ config SBC8548 config SBC8560 bool "Wind River SBC8560" select DEFAULT_UIMAGE - select PPC_CPM_NEW_BINDING if CPM2 help This option enables support for the Wind River SBC8560 board diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index cb7af4ebd75f..6cea185f62b2 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -10,3 +10,4 @@ obj-$(CONFIG_STX_GP3) += stx_gp3.o obj-$(CONFIG_TQM85xx) += tqm85xx.o obj-$(CONFIG_SBC8560) += sbc8560.o obj-$(CONFIG_SBC8548) += sbc8548.o +obj-$(CONFIG_KSI8560) += ksi8560.o diff --git a/arch/powerpc/platforms/85xx/ksi8560.c b/arch/powerpc/platforms/85xx/ksi8560.c new file mode 100644 index 000000000000..2145adeb220c --- /dev/null +++ b/arch/powerpc/platforms/85xx/ksi8560.c @@ -0,0 +1,257 @@ +/* + * Board setup routines for the Emerson KSI8560 + * + * Author: Alexandr Smirnov <asmirnov@ru.mvista.com> + * + * Based on mpc85xx_ads.c maintained by Kumar Gala + * + * 2008 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/of_platform.h> + +#include <asm/system.h> +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <asm/mpic.h> +#include <mm/mmu_decl.h> +#include <asm/udbg.h> +#include <asm/prom.h> + +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> + +#include <asm/cpm2.h> +#include <sysdev/cpm2_pic.h> + + +#define KSI8560_CPLD_HVR 0x04 /* Hardware Version Register */ +#define KSI8560_CPLD_PVR 0x08 /* PLD Version Register */ +#define KSI8560_CPLD_RCR1 0x30 /* Reset Command Register 1 */ + +#define KSI8560_CPLD_RCR1_CPUHR 0x80 /* CPU Hard Reset */ + +static void __iomem *cpld_base = NULL; + +static void machine_restart(char *cmd) +{ + if (cpld_base) + out_8(cpld_base + KSI8560_CPLD_RCR1, KSI8560_CPLD_RCR1_CPUHR); + else + printk(KERN_ERR "Can't find CPLD base, hang forever\n"); + + for (;;); +} + +static void cpm2_cascade(unsigned int irq, struct irq_desc *desc) +{ + int cascade_irq; + + while ((cascade_irq = cpm2_get_irq()) >= 0) + generic_handle_irq(cascade_irq); + + desc->chip->eoi(irq); +} + +static void __init ksi8560_pic_init(void) +{ + struct mpic *mpic; + struct resource r; + struct device_node *np; +#ifdef CONFIG_CPM2 + int irq; +#endif + + np = of_find_node_by_type(NULL, "open-pic"); + + if (np == NULL) { + printk(KERN_ERR "Could not find open-pic node\n"); + return; + } + + if (of_address_to_resource(np, 0, &r)) { + printk(KERN_ERR "Could not map mpic register space\n"); + of_node_put(np); + return; + } + + mpic = mpic_alloc(np, r.start, + MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + 0, 256, " OpenPIC "); + BUG_ON(mpic == NULL); + of_node_put(np); + + mpic_init(mpic); + +#ifdef CONFIG_CPM2 + /* Setup CPM2 PIC */ + np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic"); + if (np == NULL) { + printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n"); + return; + } + irq = irq_of_parse_and_map(np, 0); + + cpm2_pic_init(np); + of_node_put(np); + set_irq_chained_handler(irq, cpm2_cascade); + + setup_irq(0, NULL); +#endif +} + +#ifdef CONFIG_CPM2 +/* + * Setup I/O ports + */ +struct cpm_pin { + int port, pin, flags; +}; + +static struct cpm_pin __initdata ksi8560_pins[] = { + /* SCC1 */ + {3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + + /* SCC2 */ + {3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + + /* FCC1 */ + {0, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 18, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 19, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 26, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {0, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {0, 28, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {0, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {0, 30, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {0, 31, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {2, 23, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK9 */ + {2, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK10 */ + +}; + +static void __init init_ioports(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ksi8560_pins); i++) { + struct cpm_pin *pin = &ksi8560_pins[i]; + cpm2_set_pin(pin->port, pin->pin, pin->flags); + } + + cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX); + cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX); + cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK9, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK10, CPM_CLK_TX); +} +#endif + +/* + * Setup the architecture + */ +static void __init ksi8560_setup_arch(void) +{ + struct device_node *cpld; + + cpld = of_find_compatible_node(NULL, NULL, "emerson,KSI8560-cpld"); + if (cpld) + cpld_base = of_iomap(cpld, 0); + else + printk(KERN_ERR "Can't find CPLD in device tree\n"); + + if (ppc_md.progress) + ppc_md.progress("ksi8560_setup_arch()", 0); + +#ifdef CONFIG_CPM2 + cpm2_reset(); + init_ioports(); +#endif +} + +static void ksi8560_show_cpuinfo(struct seq_file *m) +{ + uint pvid, svid, phid1; + uint memsize = total_memory; + + pvid = mfspr(SPRN_PVR); + svid = mfspr(SPRN_SVR); + + seq_printf(m, "Vendor\t\t: Emerson Network Power\n"); + seq_printf(m, "Board\t\t: KSI8560\n"); + + if (cpld_base) { + seq_printf(m, "Hardware rev\t: %d\n", + in_8(cpld_base + KSI8560_CPLD_HVR)); + seq_printf(m, "CPLD rev\t: %d\n", + in_8(cpld_base + KSI8560_CPLD_PVR)); + } else + seq_printf(m, "Unknown Hardware and CPLD revs\n"); + + seq_printf(m, "PVR\t\t: 0x%x\n", pvid); + seq_printf(m, "SVR\t\t: 0x%x\n", svid); + + /* Display cpu Pll setting */ + phid1 = mfspr(SPRN_HID1); + seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); + + /* Display the amount of memory */ + seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); +} + +static struct of_device_id __initdata of_bus_ids[] = { + { .type = "soc", }, + { .name = "cpm", }, + { .name = "localbus", }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + + return 0; +} +machine_device_initcall(ksi8560, declare_of_platform_devices); + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init ksi8560_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "emerson,KSI8560"); +} + +define_machine(ksi8560) { + .name = "KSI8560", + .probe = ksi8560_probe, + .setup_arch = ksi8560_setup_arch, + .init_IRQ = ksi8560_pic_init, + .show_cpuinfo = ksi8560_show_cpuinfo, + .get_irq = mpic_get_irq, + .restart = machine_restart, + .calibrate_decr = generic_calibrate_decr, +}; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index 4e0305096114..3582c841844b 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -165,7 +165,7 @@ static void __init init_ioports(void) int i; for (i = 0; i < ARRAY_SIZE(mpc8560_ads_pins); i++) { - struct cpm_pin *pin = &mpc8560_ads_pins[i]; + const struct cpm_pin *pin = &mpc8560_ads_pins[i]; cpm2_set_pin(pin->port, pin->pin, pin->flags); } diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c index bdb3d0b38cd2..dfd8b4ad9b28 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c @@ -19,6 +19,7 @@ #include <linux/delay.h> #include <linux/seq_file.h> #include <linux/interrupt.h> +#include <linux/of_platform.h> #include <asm/system.h> #include <asm/time.h> @@ -36,7 +37,7 @@ #undef DEBUG #ifdef DEBUG -#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args) +#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args) #else #define DBG(fmt, args...) #endif @@ -183,6 +184,18 @@ static int __init mpc8544_ds_probe(void) } } +static struct of_device_id mpc85xxds_ids[] = { + { .type = "soc", }, + { .compatible = "soc", }, + {}, +}; + +static int __init mpc85xxds_publish_devices(void) +{ + return of_platform_bus_probe(NULL, mpc85xxds_ids, NULL); +} +machine_device_initcall(mpc8544_ds, mpc85xxds_publish_devices); + /* * Called very early, device-tree isn't unflattened */ diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig index 21d113536b86..7442c58d44f5 100644 --- a/arch/powerpc/platforms/86xx/Kconfig +++ b/arch/powerpc/platforms/86xx/Kconfig @@ -11,6 +11,12 @@ config MPC8641_HPCN help This option enables support for the MPC8641 HPCN board. +config SBC8641D + bool "Wind River SBC8641D" + select DEFAULT_UIMAGE + help + This option enables support for the WRS SBC8641D board. + config MPC8610_HPCD bool "Freescale MPC8610 HPCD" select DEFAULT_UIMAGE @@ -24,7 +30,7 @@ config MPC8641 select FSL_PCI if PCI select PPC_UDBG_16550 select MPIC - default y if MPC8641_HPCN + default y if MPC8641_HPCN || SBC8641D config MPC8610 bool diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile index c96706327eaa..1b9b4a9b2525 100644 --- a/arch/powerpc/platforms/86xx/Makefile +++ b/arch/powerpc/platforms/86xx/Makefile @@ -4,4 +4,5 @@ obj-$(CONFIG_SMP) += mpc86xx_smp.o obj-$(CONFIG_MPC8641_HPCN) += mpc86xx_hpcn.o +obj-$(CONFIG_SBC8641D) += sbc8641d.o obj-$(CONFIG_MPC8610_HPCD) += mpc8610_hpcd.o diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c index 0b07485641fe..5e1e8cf14e75 100644 --- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c +++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c @@ -3,11 +3,12 @@ * * Initial author: Xianghua Xiao <x.xiao@freescale.com> * Recode: Jason Jin <jason.jin@freescale.com> + * York Sun <yorksun@freescale.com> * * Rewrite the interrupt routing. remove the 8259PIC support, * All the integrated device in ULI use sideband interrupt. * - * Copyright 2007 Freescale Semiconductor Inc. + * Copyright 2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -38,6 +39,8 @@ #include <sysdev/fsl_pci.h> #include <sysdev/fsl_soc.h> +static unsigned char *pixis_bdcfg0, *pixis_arch; + static struct of_device_id __initdata mpc8610_ids[] = { { .compatible = "fsl,mpc8610-immr", }, {} @@ -52,8 +55,7 @@ static int __init mpc8610_declare_of_platform_devices(void) } machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices); -void __init -mpc86xx_hpcd_init_irq(void) +static void __init mpc86xx_hpcd_init_irq(void) { struct mpic *mpic1; struct device_node *np; @@ -161,12 +163,159 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, final_uli5288); #endif /* CONFIG_PCI */ -static void __init -mpc86xx_hpcd_setup_arch(void) +#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) + +static u32 get_busfreq(void) { -#ifdef CONFIG_PCI - struct device_node *np; + struct device_node *node; + + u32 fs_busfreq = 0; + node = of_find_node_by_type(NULL, "cpu"); + if (node) { + unsigned int size; + const unsigned int *prop = + of_get_property(node, "bus-frequency", &size); + if (prop) + fs_busfreq = *prop; + of_node_put(node); + }; + return fs_busfreq; +} + +unsigned int mpc8610hpcd_get_pixel_format(unsigned int bits_per_pixel, + int monitor_port) +{ + static const unsigned long pixelformat[][3] = { + {0x88882317, 0x88083218, 0x65052119}, + {0x88883316, 0x88082219, 0x65053118}, + }; + unsigned int pix_fmt, arch_monitor; + + arch_monitor = ((*pixis_arch == 0x01) && (monitor_port == 0))? 0 : 1; + /* DVI port for board version 0x01 */ + + if (bits_per_pixel == 32) + pix_fmt = pixelformat[arch_monitor][0]; + else if (bits_per_pixel == 24) + pix_fmt = pixelformat[arch_monitor][1]; + else if (bits_per_pixel == 16) + pix_fmt = pixelformat[arch_monitor][2]; + else + pix_fmt = pixelformat[1][0]; + + return pix_fmt; +} + +void mpc8610hpcd_set_gamma_table(int monitor_port, char *gamma_table_base) +{ + int i; + if (monitor_port == 2) { /* dual link LVDS */ + for (i = 0; i < 256*3; i++) + gamma_table_base[i] = (gamma_table_base[i] << 2) | + ((gamma_table_base[i] >> 6) & 0x03); + } +} + +void mpc8610hpcd_set_monitor_port(int monitor_port) +{ + static const u8 bdcfg[] = {0xBD, 0xB5, 0xA5}; + if (monitor_port < 3) + *pixis_bdcfg0 = bdcfg[monitor_port]; +} + +void mpc8610hpcd_set_pixel_clock(unsigned int pixclock) +{ + u32 __iomem *clkdvdr; + u32 temp; + /* variables for pixel clock calcs */ + ulong bestval, bestfreq, speed_ccb, minpixclock, maxpixclock; + ulong pixval; + long err; + int i; + + clkdvdr = ioremap(get_immrbase() + 0xe0800, sizeof(u32)); + if (!clkdvdr) { + printk(KERN_ERR "Err: can't map clock divider register!\n"); + return; + } + + /* Pixel Clock configuration */ + pr_debug("DIU: Bus Frequency = %d\n", get_busfreq()); + speed_ccb = get_busfreq(); + + /* Calculate the pixel clock with the smallest error */ + /* calculate the following in steps to avoid overflow */ + pr_debug("DIU pixclock in ps - %d\n", pixclock); + temp = 1000000000/pixclock; + temp *= 1000; + pixclock = temp; + pr_debug("DIU pixclock freq - %u\n", pixclock); + + temp = pixclock * 5 / 100; + pr_debug("deviation = %d\n", temp); + minpixclock = pixclock - temp; + maxpixclock = pixclock + temp; + pr_debug("DIU minpixclock - %lu\n", minpixclock); + pr_debug("DIU maxpixclock - %lu\n", maxpixclock); + pixval = speed_ccb/pixclock; + pr_debug("DIU pixval = %lu\n", pixval); + + err = 100000000; + bestval = pixval; + pr_debug("DIU bestval = %lu\n", bestval); + + bestfreq = 0; + for (i = -1; i <= 1; i++) { + temp = speed_ccb / ((pixval+i) + 1); + pr_debug("DIU test pixval i= %d, pixval=%lu, temp freq. = %u\n", + i, pixval, temp); + if ((temp < minpixclock) || (temp > maxpixclock)) + pr_debug("DIU exceeds monitor range (%lu to %lu)\n", + minpixclock, maxpixclock); + else if (abs(temp - pixclock) < err) { + pr_debug("Entered the else if block %d\n", i); + err = abs(temp - pixclock); + bestval = pixval+i; + bestfreq = temp; + } + } + + pr_debug("DIU chose = %lx\n", bestval); + pr_debug("DIU error = %ld\n NomPixClk ", err); + pr_debug("DIU: Best Freq = %lx\n", bestfreq); + /* Modify PXCLK in GUTS CLKDVDR */ + pr_debug("DIU: Current value of CLKDVDR = 0x%08x\n", (*clkdvdr)); + temp = (*clkdvdr) & 0x2000FFFF; + *clkdvdr = temp; /* turn off clock */ + *clkdvdr = temp | 0x80000000 | (((bestval) & 0x1F) << 16); + pr_debug("DIU: Modified value of CLKDVDR = 0x%08x\n", (*clkdvdr)); + iounmap(clkdvdr); +} + +ssize_t mpc8610hpcd_show_monitor_port(int monitor_port, char *buf) +{ + return snprintf(buf, PAGE_SIZE, + "%c0 - DVI\n" + "%c1 - Single link LVDS\n" + "%c2 - Dual link LVDS\n", + monitor_port == 0 ? '*' : ' ', + monitor_port == 1 ? '*' : ' ', + monitor_port == 2 ? '*' : ' '); +} + +int mpc8610hpcd_set_sysfs_monitor_port(int val) +{ + return val < 3 ? val : 0; +} + #endif + +static void __init mpc86xx_hpcd_setup_arch(void) +{ + struct resource r; + struct device_node *np; + unsigned char *pixis; + if (ppc_md.progress) ppc_md.progress("mpc86xx_hpcd_setup_arch()", 0); @@ -183,6 +332,30 @@ mpc86xx_hpcd_setup_arch(void) } } #endif +#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) + preallocate_diu_videomemory(); + diu_ops.get_pixel_format = mpc8610hpcd_get_pixel_format; + diu_ops.set_gamma_table = mpc8610hpcd_set_gamma_table; + diu_ops.set_monitor_port = mpc8610hpcd_set_monitor_port; + diu_ops.set_pixel_clock = mpc8610hpcd_set_pixel_clock; + diu_ops.show_monitor_port = mpc8610hpcd_show_monitor_port; + diu_ops.set_sysfs_monitor_port = mpc8610hpcd_set_sysfs_monitor_port; +#endif + + np = of_find_compatible_node(NULL, NULL, "fsl,fpga-pixis"); + if (np) { + of_address_to_resource(np, 0, &r); + of_node_put(np); + pixis = ioremap(r.start, 32); + if (!pixis) { + printk(KERN_ERR "Err: can't map FPGA cfg register!\n"); + return; + } + pixis_bdcfg0 = pixis + 8; + pixis_arch = pixis + 1; + } else + printk(KERN_ERR "Err: " + "can't find device node 'fsl,fpga-pixis'\n"); printk("MPC86xx HPCD board from Freescale Semiconductor\n"); } @@ -200,8 +373,7 @@ static int __init mpc86xx_hpcd_probe(void) return 0; } -long __init -mpc86xx_time_init(void) +static long __init mpc86xx_time_init(void) { unsigned int temp; diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index cfbe8c52e263..f947f555fd46 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -55,7 +55,7 @@ static void mpc86xx_8259_cascade(unsigned int irq, struct irq_desc *desc) } #endif /* CONFIG_PCI */ -void __init +static void __init mpc86xx_hpcn_init_irq(void) { struct mpic *mpic1; @@ -162,7 +162,7 @@ mpc86xx_hpcn_setup_arch(void) } -void +static void mpc86xx_hpcn_show_cpuinfo(struct seq_file *m) { struct device_node *root; @@ -190,13 +190,19 @@ static int __init mpc86xx_hpcn_probe(void) { unsigned long root = of_get_flat_dt_root(); - if (of_flat_dt_is_compatible(root, "mpc86xx")) + if (of_flat_dt_is_compatible(root, "fsl,mpc8641hpcn")) return 1; /* Looks good */ + /* Be nice and don't give silent boot death. Delete this in 2.6.27 */ + if (of_flat_dt_is_compatible(root, "mpc86xx")) { + pr_warning("WARNING: your dts/dtb is old. You must update before the next kernel release\n"); + return 1; + } + return 0; } -long __init +static long __init mpc86xx_time_init(void) { unsigned int temp; diff --git a/arch/powerpc/platforms/86xx/sbc8641d.c b/arch/powerpc/platforms/86xx/sbc8641d.c new file mode 100644 index 000000000000..510a06ef0b55 --- /dev/null +++ b/arch/powerpc/platforms/86xx/sbc8641d.c @@ -0,0 +1,164 @@ +/* + * SBC8641D board specific routines + * + * Copyright 2008 Wind River Systems Inc. + * + * By Paul Gortmaker (see MAINTAINERS for contact information) + * + * Based largely on the 8641 HPCN support by Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/of_platform.h> + +#include <asm/system.h> +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <asm/mpc86xx.h> +#include <asm/prom.h> +#include <mm/mmu_decl.h> +#include <asm/udbg.h> + +#include <asm/mpic.h> + +#include <sysdev/fsl_pci.h> +#include <sysdev/fsl_soc.h> + +#include "mpc86xx.h" + +static void __init +sbc8641_init_irq(void) +{ + struct mpic *mpic1; + struct device_node *np; + struct resource res; + + /* Determine PIC address. */ + np = of_find_node_by_type(NULL, "open-pic"); + if (np == NULL) + return; + of_address_to_resource(np, 0, &res); + + /* Alloc mpic structure and per isu has 16 INT entries. */ + mpic1 = mpic_alloc(np, res.start, + MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + 0, 256, " MPIC "); + of_node_put(np); + BUG_ON(mpic1 == NULL); + + mpic_init(mpic1); +} + +static void __init +sbc8641_setup_arch(void) +{ +#ifdef CONFIG_PCI + struct device_node *np; +#endif + + if (ppc_md.progress) + ppc_md.progress("sbc8641_setup_arch()", 0); + +#ifdef CONFIG_PCI + for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie") + fsl_add_bridge(np, 0); +#endif + + printk("SBC8641 board from Wind River\n"); + +#ifdef CONFIG_SMP + mpc86xx_smp_init(); +#endif +} + + +static void +sbc8641_show_cpuinfo(struct seq_file *m) +{ + struct device_node *root; + uint memsize = total_memory; + const char *model = ""; + uint svid = mfspr(SPRN_SVR); + + seq_printf(m, "Vendor\t\t: Wind River Systems\n"); + + root = of_find_node_by_path("/"); + if (root) + model = of_get_property(root, "model", NULL); + seq_printf(m, "Machine\t\t: %s\n", model); + of_node_put(root); + + seq_printf(m, "SVR\t\t: 0x%x\n", svid); + seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); +} + + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init sbc8641_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (of_flat_dt_is_compatible(root, "wind,sbc8641")) + return 1; /* Looks good */ + + return 0; +} + +static long __init +mpc86xx_time_init(void) +{ + unsigned int temp; + + /* Set the time base to zero */ + mtspr(SPRN_TBWL, 0); + mtspr(SPRN_TBWU, 0); + + temp = mfspr(SPRN_HID0); + temp |= HID0_TBEN; + mtspr(SPRN_HID0, temp); + asm volatile("isync"); + + return 0; +} + +static __initdata struct of_device_id of_bus_ids[] = { + { .compatible = "simple-bus", }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + + return 0; +} +machine_device_initcall(sbc8641, declare_of_platform_devices); + +define_machine(sbc8641) { + .name = "SBC8641D", + .probe = sbc8641_probe, + .setup_arch = sbc8641_setup_arch, + .init_IRQ = sbc8641_init_irq, + .show_cpuinfo = sbc8641_show_cpuinfo, + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .time_init = mpc86xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif +}; diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig index 7fd224ca233d..6fc849e51e48 100644 --- a/arch/powerpc/platforms/8xx/Kconfig +++ b/arch/powerpc/platforms/8xx/Kconfig @@ -18,7 +18,6 @@ config MPC8XXFADS config MPC86XADS bool "MPC86XADS" select CPM1 - select PPC_CPM_NEW_BINDING help MPC86x Application Development System by Freescale Semiconductor. The MPC86xADS is meant to serve as a platform for s/w and h/w @@ -27,7 +26,6 @@ config MPC86XADS config MPC885ADS bool "MPC885ADS" select CPM1 - select PPC_CPM_NEW_BINDING help Freescale Semiconductor MPC885 Application Development System (ADS). Also known as DUET. @@ -37,7 +35,6 @@ config MPC885ADS config PPC_EP88XC bool "Embedded Planet EP88xC (a.k.a. CWH-PPC-885XN-VE)" select CPM1 - select PPC_CPM_NEW_BINDING help This enables support for the Embedded Planet EP88xC board. @@ -47,7 +44,6 @@ config PPC_EP88XC config PPC_ADDER875 bool "Analogue & Micro Adder 875" select CPM1 - select PPC_CPM_NEW_BINDING select REDBOOT help This enables support for the Analogue & Micro Adder 875 diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c index 184f998d1be2..0d9f75c74f8c 100644 --- a/arch/powerpc/platforms/8xx/m8xx_setup.c +++ b/arch/powerpc/platforms/8xx/m8xx_setup.c @@ -111,17 +111,12 @@ void __init mpc8xx_calibrate_decr(void) /* Processor frequency is MHz. */ - ppc_tb_freq = 50000000; - if (!get_freq("bus-frequency", &ppc_tb_freq)) { - printk(KERN_ERR "WARNING: Estimating decrementer frequency " - "(not found)\n"); - } - ppc_tb_freq /= 16; ppc_proc_freq = 50000000; if (!get_freq("clock-frequency", &ppc_proc_freq)) printk(KERN_ERR "WARNING: Estimating processor frequency " "(not found)\n"); + ppc_tb_freq = ppc_proc_freq / 16; printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq); /* Perform some more timer/timebase initialization. This used diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 0afd22595546..87454c526973 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -22,7 +22,6 @@ config PPC_83xx select FSL_SOC select MPC83xx select IPIC - select FSL_EMB_PERFMON config PPC_86xx bool "Freescale 86xx" @@ -46,7 +45,6 @@ source "arch/powerpc/platforms/powermac/Kconfig" source "arch/powerpc/platforms/prep/Kconfig" source "arch/powerpc/platforms/maple/Kconfig" source "arch/powerpc/platforms/pasemi/Kconfig" -source "arch/powerpc/platforms/celleb/Kconfig" source "arch/powerpc/platforms/ps3/Kconfig" source "arch/powerpc/platforms/cell/Kconfig" source "arch/powerpc/platforms/8xx/Kconfig" @@ -291,13 +289,7 @@ config CPM2 config PPC_CPM_NEW_BINDING bool depends on CPM1 || CPM2 - help - Select this if your board has been converted to use the new - device tree bindings for CPM, and no longer needs the - ioport callbacks or the platform device glue code. - - The fs_enet and cpm_uart drivers will be built as - of_platform devices. + default y config AXON_RAM tristate "Axon DDR2 memory device driver" diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index 73d81ce14b67..f7efaa925a13 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -41,11 +41,13 @@ config 40x bool "AMCC 40x" select PPC_DCR_NATIVE select PPC_UDBG_16550 + select 4xx_SOC config 44x bool "AMCC 44x" select PPC_DCR_NATIVE select PPC_UDBG_16550 + select 4xx_SOC config E200 bool "Freescale e200" @@ -113,7 +115,12 @@ config FSL_BOOKE default y config FSL_EMB_PERFMON - bool + bool "Freescale Embedded Perfmon" + depends on E500 || PPC_83xx + help + This is the Performance Monitor support found on the e500 core + and some e300 cores (c3 and c4). Select this only if your + core supports the Embedded Performance Monitor APU config PTE_64BIT bool @@ -213,8 +220,8 @@ config SMP If you don't know what to do here, say N. config NR_CPUS - int "Maximum number of CPUs (2-128)" - range 2 128 + int "Maximum number of CPUs (2-1024)" + range 2 1024 depends on SMP default "32" if PPC64 default "4" diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index a984894466d9..423a0234dc31 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -24,5 +24,4 @@ obj-$(CONFIG_PPC_MAPLE) += maple/ obj-$(CONFIG_PPC_PASEMI) += pasemi/ obj-$(CONFIG_PPC_CELL) += cell/ obj-$(CONFIG_PPC_PS3) += ps3/ -obj-$(CONFIG_PPC_CELLEB) += celleb/ obj-$(CONFIG_EMBEDDED6xx) += embedded6xx/ diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig index 2f169991896d..3959fcfe731c 100644 --- a/arch/powerpc/platforms/cell/Kconfig +++ b/arch/powerpc/platforms/cell/Kconfig @@ -25,6 +25,19 @@ config PPC_IBM_CELL_BLADE select PPC_UDBG_16550 select UDBG_RTAS_CONSOLE +config PPC_CELLEB + bool "Toshiba's Cell Reference Set 'Celleb' Architecture" + depends on PPC_MULTIPLATFORM && PPC64 + select PPC_CELL + select PPC_CELL_NATIVE + select PPC_RTAS + select PPC_INDIRECT_IO + select PPC_OF_PLATFORM_PCI + select HAS_TXX9_SERIAL + select PPC_UDBG_BEAT + select USB_OHCI_BIG_ENDIAN_MMIO + select USB_EHCI_BIG_ENDIAN_MMIO + menu "Cell Broadband Engine options" depends on PPC_CELL diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile index c89964c6fb1f..c2a7e4e5ddf9 100644 --- a/arch/powerpc/platforms/cell/Makefile +++ b/arch/powerpc/platforms/cell/Makefile @@ -1,6 +1,7 @@ obj-$(CONFIG_PPC_CELL_NATIVE) += interrupt.o iommu.o setup.o \ cbe_regs.o spider-pic.o \ - pervasive.o pmu.o io-workarounds.o + pervasive.o pmu.o io-workarounds.o \ + spider-pci.o obj-$(CONFIG_CBE_RAS) += ras.o obj-$(CONFIG_CBE_THERM) += cbe_thermal.o @@ -26,3 +27,20 @@ obj-$(CONFIG_SPU_BASE) += spu_callbacks.o spu_base.o \ spufs/ obj-$(CONFIG_PCI_MSI) += axon_msi.o + + +# celleb stuff +ifeq ($(CONFIG_PPC_CELLEB),y) +obj-y += celleb_setup.o \ + celleb_pci.o celleb_scc_epci.o \ + celleb_scc_pciex.o \ + celleb_scc_uhc.o \ + io-workarounds.o spider-pci.o \ + beat.o beat_htab.o beat_hvCall.o \ + beat_interrupt.o beat_iommu.o + +obj-$(CONFIG_SMP) += beat_smp.o +obj-$(CONFIG_PPC_UDBG_BEAT) += beat_udbg.o +obj-$(CONFIG_SERIAL_TXX9) += celleb_scc_sio.o +obj-$(CONFIG_SPU_BASE) += beat_spu_priv1.o +endif diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c index d95e71dee91f..c39f5c225f2e 100644 --- a/arch/powerpc/platforms/cell/axon_msi.c +++ b/arch/powerpc/platforms/cell/axon_msi.c @@ -123,7 +123,7 @@ static struct axon_msic *find_msi_translator(struct pci_dev *dev) return NULL; } - for (; dn; tmp = of_get_parent(dn), of_node_put(dn), dn = tmp) { + for (; dn; dn = of_get_next_parent(dn)) { ph = of_get_property(dn, "msi-translator", NULL); if (ph) break; @@ -169,7 +169,7 @@ static int axon_msi_check_device(struct pci_dev *dev, int nvec, int type) static int setup_msi_msg_address(struct pci_dev *dev, struct msi_msg *msg) { - struct device_node *dn, *tmp; + struct device_node *dn; struct msi_desc *entry; int len; const u32 *prop; @@ -182,7 +182,7 @@ static int setup_msi_msg_address(struct pci_dev *dev, struct msi_msg *msg) entry = list_first_entry(&dev->msi_list, struct msi_desc, list); - for (; dn; tmp = of_get_parent(dn), of_node_put(dn), dn = tmp) { + for (; dn; dn = of_get_next_parent(dn)) { if (entry->msi_attrib.is_64) { prop = of_get_property(dn, "msi-address-64", &len); if (prop) diff --git a/arch/powerpc/platforms/celleb/beat.c b/arch/powerpc/platforms/cell/beat.c index 93ebb7d85120..48c690ea65da 100644 --- a/arch/powerpc/platforms/celleb/beat.c +++ b/arch/powerpc/platforms/cell/beat.c @@ -33,7 +33,7 @@ #include "beat_wrapper.h" #include "beat.h" -#include "interrupt.h" +#include "beat_interrupt.h" static int beat_pm_poweroff_flag; @@ -48,6 +48,7 @@ void beat_power_off(void) } u64 beat_halt_code = 0x1000000000000000UL; +EXPORT_SYMBOL(beat_halt_code); void beat_halt(void) { @@ -94,9 +95,8 @@ ssize_t beat_nvram_read(char *buf, size_t count, loff_t *index) len = count; if (len > BEAT_NVRW_CNT) len = BEAT_NVRW_CNT; - if (beat_eeprom_read(i, len, p)) { + if (beat_eeprom_read(i, len, p)) return -EIO; - } p += len; i += len; @@ -121,9 +121,8 @@ ssize_t beat_nvram_write(char *buf, size_t count, loff_t *index) len = count; if (len > BEAT_NVRW_CNT) len = BEAT_NVRW_CNT; - if (beat_eeprom_write(i, len, p)) { + if (beat_eeprom_write(i, len, p)) return -EIO; - } p += len; i += len; @@ -149,13 +148,14 @@ int64_t beat_get_term_char(u64 vterm, u64 *len, u64 *t1, u64 *t2) u64 db[2]; s64 ret; - ret = beat_get_characters_from_console(vterm, len, (u8*)db); + ret = beat_get_characters_from_console(vterm, len, (u8 *)db); if (ret == 0) { *t1 = db[0]; *t2 = db[1]; } return ret; } +EXPORT_SYMBOL(beat_get_term_char); int64_t beat_put_term_char(u64 vterm, u64 len, u64 t1, u64 t2) { @@ -163,8 +163,9 @@ int64_t beat_put_term_char(u64 vterm, u64 len, u64 t1, u64 t2) db[0] = t1; db[1] = t2; - return beat_put_characters_to_console(vterm, len, (u8*)db); + return beat_put_characters_to_console(vterm, len, (u8 *)db); } +EXPORT_SYMBOL(beat_put_term_char); void beat_power_save(void) { @@ -261,7 +262,3 @@ static int __init beat_event_init(void) } device_initcall(beat_event_init); - -EXPORT_SYMBOL(beat_get_term_char); -EXPORT_SYMBOL(beat_put_term_char); -EXPORT_SYMBOL(beat_halt_code); diff --git a/arch/powerpc/platforms/celleb/beat.h b/arch/powerpc/platforms/cell/beat.h index b2e292df13ca..32c8efcedc80 100644 --- a/arch/powerpc/platforms/celleb/beat.h +++ b/arch/powerpc/platforms/cell/beat.h @@ -21,11 +21,8 @@ #ifndef _CELLEB_BEAT_H #define _CELLEB_BEAT_H -#define DABRX_KERNEL (1UL<<1) -#define DABRX_USER (1UL<<0) - -int64_t beat_get_term_char(uint64_t,uint64_t*,uint64_t*,uint64_t*); -int64_t beat_put_term_char(uint64_t,uint64_t,uint64_t,uint64_t); +int64_t beat_get_term_char(uint64_t, uint64_t *, uint64_t *, uint64_t *); +int64_t beat_put_term_char(uint64_t, uint64_t, uint64_t, uint64_t); int64_t beat_repository_encode(int, const char *, uint64_t[4]); void beat_restart(char *); void beat_power_off(void); diff --git a/arch/powerpc/platforms/celleb/htab.c b/arch/powerpc/platforms/cell/beat_htab.c index fbf27c74ebda..81467ff055c8 100644 --- a/arch/powerpc/platforms/celleb/htab.c +++ b/arch/powerpc/platforms/cell/beat_htab.c @@ -35,9 +35,9 @@ #include "beat_wrapper.h" #ifdef DEBUG_LOW -#define DBG_LOW(fmt...) do { udbg_printf(fmt); } while(0) +#define DBG_LOW(fmt...) do { udbg_printf(fmt); } while (0) #else -#define DBG_LOW(fmt...) do { } while(0) +#define DBG_LOW(fmt...) do { } while (0) #endif static DEFINE_SPINLOCK(beat_htab_lock); @@ -116,7 +116,8 @@ static long beat_lpar_hpte_insert(unsigned long hpte_group, hpte_r &= ~_PAGE_COHERENT; spin_lock(&beat_htab_lock); - if ((lpar_rc = beat_read_mask(hpte_group)) == 0) { + lpar_rc = beat_read_mask(hpte_group); + if (lpar_rc == 0) { if (!(vflags & HPTE_V_BOLTED)) DBG_LOW(" full\n"); spin_unlock(&beat_htab_lock); diff --git a/arch/powerpc/platforms/celleb/hvCall.S b/arch/powerpc/platforms/cell/beat_hvCall.S index 74c817448948..74c817448948 100644 --- a/arch/powerpc/platforms/celleb/hvCall.S +++ b/arch/powerpc/platforms/cell/beat_hvCall.S diff --git a/arch/powerpc/platforms/celleb/interrupt.c b/arch/powerpc/platforms/cell/beat_interrupt.c index c7c68ca70c82..192a93509372 100644 --- a/arch/powerpc/platforms/celleb/interrupt.c +++ b/arch/powerpc/platforms/cell/beat_interrupt.c @@ -26,7 +26,7 @@ #include <asm/machdep.h> -#include "interrupt.h" +#include "beat_interrupt.h" #include "beat_wrapper.h" #define MAX_IRQS NR_IRQS @@ -34,7 +34,7 @@ static DEFINE_SPINLOCK(beatic_irq_mask_lock); static uint64_t beatic_irq_mask_enable[(MAX_IRQS+255)/64]; static uint64_t beatic_irq_mask_ack[(MAX_IRQS+255)/64]; -static struct irq_host *beatic_host = NULL; +static struct irq_host *beatic_host; /* * In this implementation, "virq" == "IRQ plug number", @@ -49,13 +49,13 @@ static inline void beatic_update_irq_mask(unsigned int irq_plug) off = (irq_plug / 256) * 4; masks[0] = beatic_irq_mask_enable[off + 0] - & beatic_irq_mask_ack[off + 0]; + & beatic_irq_mask_ack[off + 0]; masks[1] = beatic_irq_mask_enable[off + 1] - & beatic_irq_mask_ack[off + 1]; + & beatic_irq_mask_ack[off + 1]; masks[2] = beatic_irq_mask_enable[off + 2] - & beatic_irq_mask_ack[off + 2]; + & beatic_irq_mask_ack[off + 2]; masks[3] = beatic_irq_mask_enable[off + 3] - & beatic_irq_mask_ack[off + 3]; + & beatic_irq_mask_ack[off + 3]; if (beat_set_interrupt_mask(irq_plug&~255UL, masks[0], masks[1], masks[2], masks[3]) != 0) panic("Failed to set mask IRQ!"); @@ -96,7 +96,8 @@ static void beatic_end_irq(unsigned int irq_plug) s64 err; unsigned long flags; - if ((err = beat_downcount_of_interrupt(irq_plug)) != 0) { + err = beat_downcount_of_interrupt(irq_plug); + if (err != 0) { if ((err & 0xFFFFFFFF) != 0xFFFFFFF5) /* -11: wrong state */ panic("Failed to downcount IRQ! Error = %16lx", err); @@ -138,7 +139,8 @@ static int beatic_pic_host_map(struct irq_host *h, unsigned int virq, struct irq_desc *desc = get_irq_desc(virq); int64_t err; - if ((err = beat_construct_and_connect_irq_plug(virq, hw)) < 0) + err = beat_construct_and_connect_irq_plug(virq, hw); + if (err < 0) return -EIO; desc->status |= IRQ_LEVEL; @@ -202,22 +204,22 @@ static inline unsigned int beatic_get_irq_plug(void) beat_detect_pending_interrupts(i, pending); __asm__ ("cntlzd %0,%1":"=r"(ub): "r"(pending[0] & beatic_irq_mask_enable[i/64+0] - & beatic_irq_mask_ack[i/64+0])); + & beatic_irq_mask_ack[i/64+0])); if (ub != 64) return i + ub + 0; __asm__ ("cntlzd %0,%1":"=r"(ub): "r"(pending[1] & beatic_irq_mask_enable[i/64+1] - & beatic_irq_mask_ack[i/64+1])); + & beatic_irq_mask_ack[i/64+1])); if (ub != 64) return i + ub + 64; __asm__ ("cntlzd %0,%1":"=r"(ub): "r"(pending[2] & beatic_irq_mask_enable[i/64+2] - & beatic_irq_mask_ack[i/64+2])); + & beatic_irq_mask_ack[i/64+2])); if (ub != 64) return i + ub + 128; __asm__ ("cntlzd %0,%1":"=r"(ub): "r"(pending[3] & beatic_irq_mask_enable[i/64+3] - & beatic_irq_mask_ack[i/64+3])); + & beatic_irq_mask_ack[i/64+3])); if (ub != 64) return i + ub + 192; } @@ -250,7 +252,7 @@ void __init beatic_init_IRQ(void) /* Allocate an irq host */ beatic_host = irq_alloc_host(NULL, IRQ_HOST_MAP_NOMAP, 0, - &beatic_pic_host_ops, + &beatic_pic_host_ops, 0); BUG_ON(beatic_host == NULL); irq_set_default_host(beatic_host); diff --git a/arch/powerpc/platforms/celleb/interrupt.h b/arch/powerpc/platforms/cell/beat_interrupt.h index b470fd0051f1..b470fd0051f1 100644 --- a/arch/powerpc/platforms/celleb/interrupt.h +++ b/arch/powerpc/platforms/cell/beat_interrupt.h diff --git a/arch/powerpc/platforms/celleb/iommu.c b/arch/powerpc/platforms/cell/beat_iommu.c index 93b0efddd658..93b0efddd658 100644 --- a/arch/powerpc/platforms/celleb/iommu.c +++ b/arch/powerpc/platforms/cell/beat_iommu.c diff --git a/arch/powerpc/platforms/celleb/smp.c b/arch/powerpc/platforms/cell/beat_smp.c index a7631250aeb4..26efc204c47f 100644 --- a/arch/powerpc/platforms/celleb/smp.c +++ b/arch/powerpc/platforms/cell/beat_smp.c @@ -37,7 +37,7 @@ #include <asm/machdep.h> #include <asm/udbg.h> -#include "interrupt.h" +#include "beat_interrupt.h" #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) diff --git a/arch/powerpc/platforms/celleb/spu_priv1.c b/arch/powerpc/platforms/cell/beat_spu_priv1.c index 2bf6700f747a..bcc17f7fe8ad 100644 --- a/arch/powerpc/platforms/celleb/spu_priv1.c +++ b/arch/powerpc/platforms/cell/beat_spu_priv1.c @@ -183,8 +183,7 @@ static u64 resource_allocation_enable_get(struct spu *spu) return enable; } -const struct spu_priv1_ops spu_priv1_beat_ops = -{ +const struct spu_priv1_ops spu_priv1_beat_ops = { .int_mask_and = int_mask_and, .int_mask_or = int_mask_or, .int_mask_set = int_mask_set, diff --git a/arch/powerpc/platforms/celleb/beat_syscall.h b/arch/powerpc/platforms/cell/beat_syscall.h index 8580dc7e1798..8580dc7e1798 100644 --- a/arch/powerpc/platforms/celleb/beat_syscall.h +++ b/arch/powerpc/platforms/cell/beat_syscall.h diff --git a/arch/powerpc/platforms/celleb/udbg_beat.c b/arch/powerpc/platforms/cell/beat_udbg.c index d888c4674c62..6b418f6b6175 100644 --- a/arch/powerpc/platforms/celleb/udbg_beat.c +++ b/arch/powerpc/platforms/cell/beat_udbg.c @@ -54,7 +54,8 @@ static int udbg_getc_poll_beat(void) if (inbuflen == 0) { /* get some more chars. */ inbuflen = 0; - rc = beat_get_term_char(celleb_vtermno, &inbuflen, inbuf+0, inbuf+1); + rc = beat_get_term_char(celleb_vtermno, &inbuflen, + inbuf+0, inbuf+1); if (rc != 0) inbuflen = 0; /* otherwise inbuflen is garbage */ } @@ -78,7 +79,7 @@ static int udbg_getc_beat(void) if (ch == -1) { /* This shouldn't be needed...but... */ volatile unsigned long delay; - for (delay=0; delay < 2000000; delay++) + for (delay = 0; delay < 2000000; delay++) ; } else { return ch; diff --git a/arch/powerpc/platforms/celleb/beat_wrapper.h b/arch/powerpc/platforms/cell/beat_wrapper.h index cbc1487df7de..b47dfda48d06 100644 --- a/arch/powerpc/platforms/celleb/beat_wrapper.h +++ b/arch/powerpc/platforms/cell/beat_wrapper.h @@ -197,7 +197,8 @@ static inline s64 beat_put_characters_to_console(u64 termno, u64 len, u64 b[2]; memcpy(b, buffer, len); - return beat_hcall_norets(HV_put_characters_to_console, termno, len, b[0], b[1]); + return beat_hcall_norets(HV_put_characters_to_console, termno, len, + b[0], b[1]); } static inline s64 beat_get_spe_privileged_state_1_registers( diff --git a/arch/powerpc/platforms/celleb/pci.c b/arch/powerpc/platforms/cell/celleb_pci.c index 51b390d34e4d..f39a3b2a1667 100644 --- a/arch/powerpc/platforms/celleb/pci.c +++ b/arch/powerpc/platforms/cell/celleb_pci.c @@ -37,12 +37,11 @@ #include <asm/io.h> #include <asm/irq.h> #include <asm/prom.h> -#include <asm/machdep.h> #include <asm/pci-bridge.h> #include <asm/ppc-pci.h> -#include "pci.h" -#include "interrupt.h" +#include "io-workarounds.h" +#include "celleb_pci.h" #define MAX_PCI_DEVICES 32 #define MAX_PCI_FUNCTIONS 8 @@ -190,7 +189,7 @@ static int celleb_fake_pci_read_config(struct pci_bus *bus, static int celleb_fake_pci_write_config(struct pci_bus *bus, - unsigned int devfn, int where, int size, u32 val) + unsigned int devfn, int where, int size, u32 val) { char *config; struct device_node *node; @@ -457,33 +456,42 @@ static int __init celleb_setup_fake_pci(struct device_node *dev, return 0; } -void __init fake_pci_workaround_init(struct pci_controller *phb) -{ - /** - * We will add fake pci bus to scc_pci_bus for the purpose to improve - * I/O Macro performance. But device-tree and device drivers - * are not ready to use address with a token. - */ - - /* celleb_pci_add_one(phb, NULL); */ -} +static struct celleb_phb_spec celleb_fake_pci_spec __initdata = { + .setup = celleb_setup_fake_pci, +}; static struct of_device_id celleb_phb_match[] __initdata = { { .name = "pci-pseudo", - .data = celleb_setup_fake_pci, + .data = &celleb_fake_pci_spec, }, { .name = "epci", - .data = celleb_setup_epci, + .data = &celleb_epci_spec, + }, { + .name = "pcie", + .data = &celleb_pciex_spec, }, { }, }; +static int __init celleb_io_workaround_init(struct pci_controller *phb, + struct celleb_phb_spec *phb_spec) +{ + if (phb_spec->ops) { + iowa_register_bus(phb, phb_spec->ops, phb_spec->iowa_init, + phb_spec->iowa_data); + io_workaround_init(); + } + + return 0; +} + int __init celleb_setup_phb(struct pci_controller *phb) { struct device_node *dev = phb->dn; const struct of_device_id *match; - int (*setup_func)(struct device_node *, struct pci_controller *); + struct celleb_phb_spec *phb_spec; + int rc; match = of_match_node(celleb_phb_match, dev); if (!match) @@ -492,8 +500,12 @@ int __init celleb_setup_phb(struct pci_controller *phb) phb_set_bus_ranges(dev, phb); phb->buid = 1; - setup_func = match->data; - return (*setup_func)(dev, phb); + phb_spec = match->data; + rc = (*phb_spec->setup)(dev, phb); + if (rc) + return 1; + + return celleb_io_workaround_init(phb, phb_spec); } int celleb_pci_probe_mode(struct pci_bus *bus) diff --git a/arch/powerpc/platforms/celleb/pci.h b/arch/powerpc/platforms/cell/celleb_pci.h index 5d5544ffeddb..4cba1523ec50 100644 --- a/arch/powerpc/platforms/celleb/pci.h +++ b/arch/powerpc/platforms/cell/celleb_pci.h @@ -27,16 +27,19 @@ #include <asm/prom.h> #include <asm/ppc-pci.h> +#include "io-workarounds.h" + +struct celleb_phb_spec { + int (*setup)(struct device_node *, struct pci_controller *); + struct ppc_pci_io *ops; + int (*iowa_init)(struct iowa_bus *, void *); + void *iowa_data; +}; + extern int celleb_setup_phb(struct pci_controller *); extern int celleb_pci_probe_mode(struct pci_bus *); -extern int celleb_setup_epci(struct device_node *, struct pci_controller *); - -extern void *celleb_dummy_page_va; -extern int __init celleb_pci_workaround_init(void); -extern void __init celleb_pci_add_one(struct pci_controller *, - void (*)(struct pci_controller *)); -extern void fake_pci_workaround_init(struct pci_controller *); -extern void epci_workaround_init(struct pci_controller *); +extern struct celleb_phb_spec celleb_epci_spec; +extern struct celleb_phb_spec celleb_pciex_spec; #endif /* _CELLEB_PCI_H */ diff --git a/arch/powerpc/platforms/celleb/scc.h b/arch/powerpc/platforms/cell/celleb_scc.h index 6be1542a6e66..b596a711c348 100644 --- a/arch/powerpc/platforms/celleb/scc.h +++ b/arch/powerpc/platforms/cell/celleb_scc.h @@ -125,6 +125,93 @@ /* bits for SCC_EPCI_CNTOPT */ #define SCC_EPCI_CNTOPT_O2PMB 0x00000002 +/* SCC PCIEXC SMMIO registers */ +#define PEXCADRS 0x000 +#define PEXCWDATA 0x004 +#define PEXCRDATA 0x008 +#define PEXDADRS 0x010 +#define PEXDCMND 0x014 +#define PEXDWDATA 0x018 +#define PEXDRDATA 0x01c +#define PEXREQID 0x020 +#define PEXTIDMAP 0x024 +#define PEXINTMASK 0x028 +#define PEXINTSTS 0x02c +#define PEXAERRMASK 0x030 +#define PEXAERRSTS 0x034 +#define PEXPRERRMASK 0x040 +#define PEXPRERRSTS 0x044 +#define PEXPRERRID01 0x048 +#define PEXPRERRID23 0x04c +#define PEXVDMASK 0x050 +#define PEXVDSTS 0x054 +#define PEXRCVCPLIDA 0x060 +#define PEXLENERRIDA 0x068 +#define PEXPHYPLLST 0x070 +#define PEXDMRDEN0 0x100 +#define PEXDMRDADR0 0x104 +#define PEXDMRDENX 0x110 +#define PEXDMRDADRX 0x114 +#define PEXECMODE 0xf00 +#define PEXMAEA(n) (0xf50 + (8 * n)) +#define PEXMAEC(n) (0xf54 + (8 * n)) +#define PEXCCRCTRL 0xff0 + +/* SCC PCIEXC bits and shifts for PEXCADRS */ +#define PEXCADRS_BYTE_EN_SHIFT 20 +#define PEXCADRS_CMD_SHIFT 16 +#define PEXCADRS_CMD_READ (0xa << PEXCADRS_CMD_SHIFT) +#define PEXCADRS_CMD_WRITE (0xb << PEXCADRS_CMD_SHIFT) + +/* SCC PCIEXC shifts for PEXDADRS */ +#define PEXDADRS_BUSNO_SHIFT 20 +#define PEXDADRS_DEVNO_SHIFT 15 +#define PEXDADRS_FUNCNO_SHIFT 12 + +/* SCC PCIEXC bits and shifts for PEXDCMND */ +#define PEXDCMND_BYTE_EN_SHIFT 4 +#define PEXDCMND_IO_READ 0x2 +#define PEXDCMND_IO_WRITE 0x3 +#define PEXDCMND_CONFIG_READ 0xa +#define PEXDCMND_CONFIG_WRITE 0xb + +/* SCC PCIEXC bits for PEXPHYPLLST */ +#define PEXPHYPLLST_PEXPHYAPLLST 0x00000001 + +/* SCC PCIEXC bits for PEXECMODE */ +#define PEXECMODE_ALL_THROUGH 0x00000000 +#define PEXECMODE_ALL_8BIT 0x00550155 +#define PEXECMODE_ALL_16BIT 0x00aa02aa + +/* SCC PCIEXC bits for PEXCCRCTRL */ +#define PEXCCRCTRL_PEXIPCOREEN 0x00040000 +#define PEXCCRCTRL_PEXIPCONTEN 0x00020000 +#define PEXCCRCTRL_PEXPHYPLLEN 0x00010000 +#define PEXCCRCTRL_PCIEXCAOCKEN 0x00000100 + +/* SCC PCIEXC port configuration registers */ +#define PEXTCERRCHK 0x21c +#define PEXTAMAPB0 0x220 +#define PEXTAMAPL0 0x224 +#define PEXTAMAPB(n) (PEXTAMAPB0 + 8 * (n)) +#define PEXTAMAPL(n) (PEXTAMAPL0 + 8 * (n)) +#define PEXCHVC0P 0x500 +#define PEXCHVC0NP 0x504 +#define PEXCHVC0C 0x508 +#define PEXCDVC0P 0x50c +#define PEXCDVC0NP 0x510 +#define PEXCDVC0C 0x514 +#define PEXCHVCXP 0x518 +#define PEXCHVCXNP 0x51c +#define PEXCHVCXC 0x520 +#define PEXCDVCXP 0x524 +#define PEXCDVCXNP 0x528 +#define PEXCDVCXC 0x52c +#define PEXCTTRG 0x530 +#define PEXTSCTRL 0x700 +#define PEXTSSTS 0x704 +#define PEXSKPCTRL 0x708 + /* UHC registers */ #define SCC_UHC_CKRCTRL 0xff0 #define SCC_UHC_ECMODE 0xf00 diff --git a/arch/powerpc/platforms/celleb/scc_epci.c b/arch/powerpc/platforms/cell/celleb_scc_epci.c index a3c7cfbcb323..08c285b10e30 100644 --- a/arch/powerpc/platforms/celleb/scc_epci.c +++ b/arch/powerpc/platforms/cell/celleb_scc_epci.c @@ -30,23 +30,17 @@ #include <asm/io.h> #include <asm/irq.h> #include <asm/prom.h> -#include <asm/machdep.h> #include <asm/pci-bridge.h> #include <asm/ppc-pci.h> -#include "scc.h" -#include "pci.h" -#include "interrupt.h" +#include "celleb_scc.h" +#include "celleb_pci.h" #define MAX_PCI_DEVICES 32 #define MAX_PCI_FUNCTIONS 8 #define iob() __asm__ __volatile__("eieio; sync":::"memory") -struct epci_private { - dma_addr_t dummy_page_da; -}; - static inline PCI_IO_ADDR celleb_epci_get_epci_base( struct pci_controller *hose) { @@ -71,42 +65,6 @@ static inline PCI_IO_ADDR celleb_epci_get_epci_cfg( return hose->cfg_data; } -static void scc_epci_dummy_read(struct pci_controller *hose) -{ - PCI_IO_ADDR epci_base; - u32 val; - - epci_base = celleb_epci_get_epci_base(hose); - - val = in_be32(epci_base + SCC_EPCI_WATRP); - iosync(); - - return; -} - -void __init epci_workaround_init(struct pci_controller *hose) -{ - PCI_IO_ADDR epci_base; - PCI_IO_ADDR reg; - struct epci_private *private = hose->private_data; - - BUG_ON(!private); - - private->dummy_page_da = dma_map_single(hose->parent, - celleb_dummy_page_va, PAGE_SIZE, DMA_FROM_DEVICE); - if (private->dummy_page_da == DMA_ERROR_CODE) { - printk(KERN_ERR "EPCI: dummy read disabled. " - "Map dummy page failed.\n"); - return; - } - - celleb_pci_add_one(hose, scc_epci_dummy_read); - epci_base = celleb_epci_get_epci_base(hose); - - reg = epci_base + SCC_EPCI_DUMYRADR; - out_be32(reg, private->dummy_page_da); -} - static inline void clear_and_disable_master_abort_interrupt( struct pci_controller *hose) { @@ -151,19 +109,17 @@ static int celleb_epci_check_abort(struct pci_controller *hose, return PCIBIOS_SUCCESSFUL; } -static PCI_IO_ADDR celleb_epci_make_config_addr( - struct pci_bus *bus, - struct pci_controller *hose, - unsigned int devfn, int where) +static PCI_IO_ADDR celleb_epci_make_config_addr(struct pci_bus *bus, + struct pci_controller *hose, unsigned int devfn, int where) { PCI_IO_ADDR addr; if (bus != hose->bus) addr = celleb_epci_get_epci_cfg(hose) + (((bus->number & 0xff) << 16) - | ((devfn & 0xff) << 8) - | (where & 0xff) - | 0x01000000); + | ((devfn & 0xff) << 8) + | (where & 0xff) + | 0x01000000); else addr = celleb_epci_get_epci_cfg(hose) + (((devfn & 0xff) << 8) | (where & 0xff)); @@ -174,7 +130,7 @@ static PCI_IO_ADDR celleb_epci_make_config_addr( } static int celleb_epci_read_config(struct pci_bus *bus, - unsigned int devfn, int where, int size, u32 * val) + unsigned int devfn, int where, int size, u32 *val) { PCI_IO_ADDR epci_base; PCI_IO_ADDR addr; @@ -425,8 +381,8 @@ static int __init celleb_epci_init(struct pci_controller *hose) return 0; } -int __init celleb_setup_epci(struct device_node *node, - struct pci_controller *hose) +static int __init celleb_setup_epci(struct device_node *node, + struct pci_controller *hose) { struct resource r; @@ -450,8 +406,7 @@ int __init celleb_setup_epci(struct device_node *node, if (!hose->cfg_addr) goto error; pr_debug("EPCI: cfg_addr map 0x%016lx->0x%016lx + 0x%016lx\n", - r.start, (unsigned long)hose->cfg_addr, - (r.end - r.start + 1)); + r.start, (unsigned long)hose->cfg_addr, (r.end - r.start + 1)); if (of_address_to_resource(node, 2, &r)) goto error; @@ -459,14 +414,7 @@ int __init celleb_setup_epci(struct device_node *node, if (!hose->cfg_data) goto error; pr_debug("EPCI: cfg_data map 0x%016lx->0x%016lx + 0x%016lx\n", - r.start, (unsigned long)hose->cfg_data, - (r.end - r.start + 1)); - - hose->private_data = kzalloc(sizeof(struct epci_private), GFP_KERNEL); - if (hose->private_data == NULL) { - printk(KERN_ERR "EPCI: no memory for private data.\n"); - goto error; - } + r.start, (unsigned long)hose->cfg_data, (r.end - r.start + 1)); hose->ops = &celleb_epci_ops; celleb_epci_init(hose); @@ -474,8 +422,6 @@ int __init celleb_setup_epci(struct device_node *node, return 0; error: - kfree(hose->private_data); - if (hose->cfg_addr) iounmap(hose->cfg_addr); @@ -483,3 +429,10 @@ error: iounmap(hose->cfg_data); return 1; } + +struct celleb_phb_spec celleb_epci_spec __initdata = { + .setup = celleb_setup_epci, + .ops = &spiderpci_ops, + .iowa_init = &spiderpci_iowa_init, + .iowa_data = (void *)0, +}; diff --git a/arch/powerpc/platforms/cell/celleb_scc_pciex.c b/arch/powerpc/platforms/cell/celleb_scc_pciex.c new file mode 100644 index 000000000000..31da84c458d2 --- /dev/null +++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c @@ -0,0 +1,547 @@ +/* + * Support for Celleb PCI-Express. + * + * (C) Copyright 2007-2008 TOSHIBA CORPORATION + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#undef DEBUG + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/bootmem.h> +#include <linux/delay.h> +#include <linux/interrupt.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/iommu.h> +#include <asm/byteorder.h> + +#include "celleb_scc.h" +#include "celleb_pci.h" + +#define PEX_IN(base, off) in_be32((void __iomem *)(base) + (off)) +#define PEX_OUT(base, off, data) out_be32((void __iomem *)(base) + (off), (data)) + +static void scc_pciex_io_flush(struct iowa_bus *bus) +{ + (void)PEX_IN(bus->phb->cfg_addr, PEXDMRDEN0); +} + +/* + * Memory space access to device on PCIEX + */ +#define PCIEX_MMIO_READ(name, ret) \ +static ret scc_pciex_##name(const PCI_IO_ADDR addr) \ +{ \ + ret val = __do_##name(addr); \ + scc_pciex_io_flush(iowa_mem_find_bus(addr)); \ + return val; \ +} + +#define PCIEX_MMIO_READ_STR(name) \ +static void scc_pciex_##name(const PCI_IO_ADDR addr, void *buf, \ + unsigned long count) \ +{ \ + __do_##name(addr, buf, count); \ + scc_pciex_io_flush(iowa_mem_find_bus(addr)); \ +} + +PCIEX_MMIO_READ(readb, u8) +PCIEX_MMIO_READ(readw, u16) +PCIEX_MMIO_READ(readl, u32) +PCIEX_MMIO_READ(readq, u64) +PCIEX_MMIO_READ(readw_be, u16) +PCIEX_MMIO_READ(readl_be, u32) +PCIEX_MMIO_READ(readq_be, u64) +PCIEX_MMIO_READ_STR(readsb) +PCIEX_MMIO_READ_STR(readsw) +PCIEX_MMIO_READ_STR(readsl) + +static void scc_pciex_memcpy_fromio(void *dest, const PCI_IO_ADDR src, + unsigned long n) +{ + __do_memcpy_fromio(dest, src, n); + scc_pciex_io_flush(iowa_mem_find_bus(src)); +} + +/* + * I/O port access to devices on PCIEX. + */ + +static inline unsigned long get_bus_address(struct pci_controller *phb, + unsigned long port) +{ + return port - ((unsigned long)(phb->io_base_virt) - _IO_BASE); +} + +static u32 scc_pciex_read_port(struct pci_controller *phb, + unsigned long port, int size) +{ + unsigned int byte_enable; + unsigned int cmd, shift; + unsigned long addr; + u32 data, ret; + + BUG_ON(((port & 0x3ul) + size) > 4); + + addr = get_bus_address(phb, port); + shift = addr & 0x3ul; + byte_enable = ((1 << size) - 1) << shift; + cmd = PEXDCMND_IO_READ | (byte_enable << PEXDCMND_BYTE_EN_SHIFT); + PEX_OUT(phb->cfg_addr, PEXDADRS, (addr & ~0x3ul)); + PEX_OUT(phb->cfg_addr, PEXDCMND, cmd); + data = PEX_IN(phb->cfg_addr, PEXDRDATA); + ret = (data >> (shift * 8)) & (0xFFFFFFFF >> ((4 - size) * 8)); + + pr_debug("PCIEX:PIO READ:port=0x%lx, addr=0x%lx, size=%d, be=%x," + " cmd=%x, data=%x, ret=%x\n", port, addr, size, byte_enable, + cmd, data, ret); + + return ret; +} + +static void scc_pciex_write_port(struct pci_controller *phb, + unsigned long port, int size, u32 val) +{ + unsigned int byte_enable; + unsigned int cmd, shift; + unsigned long addr; + u32 data; + + BUG_ON(((port & 0x3ul) + size) > 4); + + addr = get_bus_address(phb, port); + shift = addr & 0x3ul; + byte_enable = ((1 << size) - 1) << shift; + cmd = PEXDCMND_IO_WRITE | (byte_enable << PEXDCMND_BYTE_EN_SHIFT); + data = (val & (0xFFFFFFFF >> (4 - size) * 8)) << (shift * 8); + PEX_OUT(phb->cfg_addr, PEXDADRS, (addr & ~0x3ul)); + PEX_OUT(phb->cfg_addr, PEXDCMND, cmd); + PEX_OUT(phb->cfg_addr, PEXDWDATA, data); + + pr_debug("PCIEX:PIO WRITE:port=0x%lx, addr=%lx, size=%d, val=%x," + " be=%x, cmd=%x, data=%x\n", port, addr, size, val, + byte_enable, cmd, data); +} + +static u8 __scc_pciex_inb(struct pci_controller *phb, unsigned long port) +{ + return (u8)scc_pciex_read_port(phb, port, 1); +} + +static u16 __scc_pciex_inw(struct pci_controller *phb, unsigned long port) +{ + u32 data; + if ((port & 0x3ul) < 3) + data = scc_pciex_read_port(phb, port, 2); + else { + u32 d1 = scc_pciex_read_port(phb, port, 1); + u32 d2 = scc_pciex_read_port(phb, port + 1, 1); + data = d1 | (d2 << 8); + } + return (u16)data; +} + +static u32 __scc_pciex_inl(struct pci_controller *phb, unsigned long port) +{ + unsigned int mod = port & 0x3ul; + u32 data; + if (mod == 0) + data = scc_pciex_read_port(phb, port, 4); + else { + u32 d1 = scc_pciex_read_port(phb, port, 4 - mod); + u32 d2 = scc_pciex_read_port(phb, port + 1, mod); + data = d1 | (d2 << (mod * 8)); + } + return data; +} + +static void __scc_pciex_outb(struct pci_controller *phb, + u8 val, unsigned long port) +{ + scc_pciex_write_port(phb, port, 1, (u32)val); +} + +static void __scc_pciex_outw(struct pci_controller *phb, + u16 val, unsigned long port) +{ + if ((port & 0x3ul) < 3) + scc_pciex_write_port(phb, port, 2, (u32)val); + else { + u32 d1 = val & 0x000000FF; + u32 d2 = (val & 0x0000FF00) >> 8; + scc_pciex_write_port(phb, port, 1, d1); + scc_pciex_write_port(phb, port + 1, 1, d2); + } +} + +static void __scc_pciex_outl(struct pci_controller *phb, + u32 val, unsigned long port) +{ + unsigned int mod = port & 0x3ul; + if (mod == 0) + scc_pciex_write_port(phb, port, 4, val); + else { + u32 d1 = val & (0xFFFFFFFFul >> (mod * 8)); + u32 d2 = val >> ((4 - mod) * 8); + scc_pciex_write_port(phb, port, 4 - mod, d1); + scc_pciex_write_port(phb, port + 1, mod, d2); + } +} + +#define PCIEX_PIO_FUNC(size, name) \ +static u##size scc_pciex_in##name(unsigned long port) \ +{ \ + struct iowa_bus *bus = iowa_pio_find_bus(port); \ + u##size data = __scc_pciex_in##name(bus->phb, port); \ + scc_pciex_io_flush(bus); \ + return data; \ +} \ +static void scc_pciex_ins##name(unsigned long p, void *b, unsigned long c) \ +{ \ + struct iowa_bus *bus = iowa_pio_find_bus(p); \ + u##size *dst = b; \ + for (; c != 0; c--, dst++) \ + *dst = cpu_to_le##size(__scc_pciex_in##name(bus->phb, p)); \ + scc_pciex_io_flush(bus); \ +} \ +static void scc_pciex_out##name(u##size val, unsigned long port) \ +{ \ + struct iowa_bus *bus = iowa_pio_find_bus(port); \ + __scc_pciex_out##name(bus->phb, val, port); \ +} \ +static void scc_pciex_outs##name(unsigned long p, const void *b, \ + unsigned long c) \ +{ \ + struct iowa_bus *bus = iowa_pio_find_bus(p); \ + const u##size *src = b; \ + for (; c != 0; c--, src++) \ + __scc_pciex_out##name(bus->phb, le##size##_to_cpu(*src), p); \ +} +#define cpu_to_le8(x) (x) +#define le8_to_cpu(x) (x) +PCIEX_PIO_FUNC(8, b) +PCIEX_PIO_FUNC(16, w) +PCIEX_PIO_FUNC(32, l) + +static struct ppc_pci_io scc_pciex_ops = { + .readb = scc_pciex_readb, + .readw = scc_pciex_readw, + .readl = scc_pciex_readl, + .readq = scc_pciex_readq, + .readw_be = scc_pciex_readw_be, + .readl_be = scc_pciex_readl_be, + .readq_be = scc_pciex_readq_be, + .readsb = scc_pciex_readsb, + .readsw = scc_pciex_readsw, + .readsl = scc_pciex_readsl, + .memcpy_fromio = scc_pciex_memcpy_fromio, + .inb = scc_pciex_inb, + .inw = scc_pciex_inw, + .inl = scc_pciex_inl, + .outb = scc_pciex_outb, + .outw = scc_pciex_outw, + .outl = scc_pciex_outl, + .insb = scc_pciex_insb, + .insw = scc_pciex_insw, + .insl = scc_pciex_insl, + .outsb = scc_pciex_outsb, + .outsw = scc_pciex_outsw, + .outsl = scc_pciex_outsl, +}; + +static int __init scc_pciex_iowa_init(struct iowa_bus *bus, void *data) +{ + dma_addr_t dummy_page_da; + void *dummy_page_va; + + dummy_page_va = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!dummy_page_va) { + pr_err("PCIEX:Alloc dummy_page_va failed\n"); + return -1; + } + + dummy_page_da = dma_map_single(bus->phb->parent, dummy_page_va, + PAGE_SIZE, DMA_FROM_DEVICE); + if (dma_mapping_error(dummy_page_da)) { + pr_err("PCIEX:Map dummy page failed.\n"); + kfree(dummy_page_va); + return -1; + } + + PEX_OUT(bus->phb->cfg_addr, PEXDMRDADR0, dummy_page_da); + + return 0; +} + +/* + * config space access + */ +#define MK_PEXDADRS(bus_no, dev_no, func_no, addr) \ + ((uint32_t)(((addr) & ~0x3UL) | \ + ((bus_no) << PEXDADRS_BUSNO_SHIFT) | \ + ((dev_no) << PEXDADRS_DEVNO_SHIFT) | \ + ((func_no) << PEXDADRS_FUNCNO_SHIFT))) + +#define MK_PEXDCMND_BYTE_EN(addr, size) \ + ((((0x1 << (size))-1) << ((addr) & 0x3)) << PEXDCMND_BYTE_EN_SHIFT) +#define MK_PEXDCMND(cmd, addr, size) ((cmd) | MK_PEXDCMND_BYTE_EN(addr, size)) + +static uint32_t config_read_pciex_dev(unsigned int __iomem *base, + uint64_t bus_no, uint64_t dev_no, uint64_t func_no, + uint64_t off, uint64_t size) +{ + uint32_t ret; + uint32_t addr, cmd; + + addr = MK_PEXDADRS(bus_no, dev_no, func_no, off); + cmd = MK_PEXDCMND(PEXDCMND_CONFIG_READ, off, size); + PEX_OUT(base, PEXDADRS, addr); + PEX_OUT(base, PEXDCMND, cmd); + ret = (PEX_IN(base, PEXDRDATA) + >> ((off & (4-size)) * 8)) & ((0x1 << (size * 8)) - 1); + return ret; +} + +static void config_write_pciex_dev(unsigned int __iomem *base, uint64_t bus_no, + uint64_t dev_no, uint64_t func_no, uint64_t off, uint64_t size, + uint32_t data) +{ + uint32_t addr, cmd; + + addr = MK_PEXDADRS(bus_no, dev_no, func_no, off); + cmd = MK_PEXDCMND(PEXDCMND_CONFIG_WRITE, off, size); + PEX_OUT(base, PEXDADRS, addr); + PEX_OUT(base, PEXDCMND, cmd); + PEX_OUT(base, PEXDWDATA, + (data & ((0x1 << (size * 8)) - 1)) << ((off & (4-size)) * 8)); +} + +#define MK_PEXCADRS_BYTE_EN(off, len) \ + ((((0x1 << (len)) - 1) << ((off) & 0x3)) << PEXCADRS_BYTE_EN_SHIFT) +#define MK_PEXCADRS(cmd, addr, size) \ + ((cmd) | MK_PEXCADRS_BYTE_EN(addr, size) | ((addr) & ~0x3)) +static uint32_t config_read_pciex_rc(unsigned int __iomem *base, + uint32_t where, uint32_t size) +{ + PEX_OUT(base, PEXCADRS, MK_PEXCADRS(PEXCADRS_CMD_READ, where, size)); + return (PEX_IN(base, PEXCRDATA) + >> ((where & (4 - size)) * 8)) & ((0x1 << (size * 8)) - 1); +} + +static void config_write_pciex_rc(unsigned int __iomem *base, uint32_t where, + uint32_t size, uint32_t val) +{ + uint32_t data; + + data = (val & ((0x1 << (size * 8)) - 1)) << ((where & (4 - size)) * 8); + PEX_OUT(base, PEXCADRS, MK_PEXCADRS(PEXCADRS_CMD_WRITE, where, size)); + PEX_OUT(base, PEXCWDATA, data); +} + +/* Interfaces */ +/* Note: Work-around + * On SCC PCIEXC, one device is seen on all 32 dev_no. + * As SCC PCIEXC can have only one device on the bus, we look only one dev_no. + * (dev_no = 1) + */ +static int scc_pciex_read_config(struct pci_bus *bus, unsigned int devfn, + int where, int size, unsigned int *val) +{ + struct device_node *dn; + struct pci_controller *phb; + + dn = bus->sysdata; + phb = pci_find_hose_for_OF_device(dn); + + if (bus->number == phb->first_busno && PCI_SLOT(devfn) != 1) { + *val = ~0; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + if (bus->number == 0 && PCI_SLOT(devfn) == 0) + *val = config_read_pciex_rc(phb->cfg_addr, where, size); + else + *val = config_read_pciex_dev(phb->cfg_addr, bus->number, + PCI_SLOT(devfn), PCI_FUNC(devfn), where, size); + + return PCIBIOS_SUCCESSFUL; +} + +static int scc_pciex_write_config(struct pci_bus *bus, unsigned int devfn, + int where, int size, unsigned int val) +{ + struct device_node *dn; + struct pci_controller *phb; + + dn = bus->sysdata; + phb = pci_find_hose_for_OF_device(dn); + + if (bus->number == phb->first_busno && PCI_SLOT(devfn) != 1) + return PCIBIOS_DEVICE_NOT_FOUND; + + if (bus->number == 0 && PCI_SLOT(devfn) == 0) + config_write_pciex_rc(phb->cfg_addr, where, size, val); + else + config_write_pciex_dev(phb->cfg_addr, bus->number, + PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, val); + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops scc_pciex_pci_ops = { + scc_pciex_read_config, + scc_pciex_write_config, +}; + +static void pciex_clear_intr_all(unsigned int __iomem *base) +{ + PEX_OUT(base, PEXAERRSTS, 0xffffffff); + PEX_OUT(base, PEXPRERRSTS, 0xffffffff); + PEX_OUT(base, PEXINTSTS, 0xffffffff); +} + +#if 0 +static void pciex_disable_intr_all(unsigned int *base) +{ + PEX_OUT(base, PEXINTMASK, 0x0); + PEX_OUT(base, PEXAERRMASK, 0x0); + PEX_OUT(base, PEXPRERRMASK, 0x0); + PEX_OUT(base, PEXVDMASK, 0x0); +} +#endif + +static void pciex_enable_intr_all(unsigned int __iomem *base) +{ + PEX_OUT(base, PEXINTMASK, 0x0000e7f1); + PEX_OUT(base, PEXAERRMASK, 0x03ff01ff); + PEX_OUT(base, PEXPRERRMASK, 0x0001010f); + PEX_OUT(base, PEXVDMASK, 0x00000001); +} + +static void pciex_check_status(unsigned int __iomem *base) +{ + uint32_t err = 0; + uint32_t intsts, aerr, prerr, rcvcp, lenerr; + uint32_t maea, maec; + + intsts = PEX_IN(base, PEXINTSTS); + aerr = PEX_IN(base, PEXAERRSTS); + prerr = PEX_IN(base, PEXPRERRSTS); + rcvcp = PEX_IN(base, PEXRCVCPLIDA); + lenerr = PEX_IN(base, PEXLENERRIDA); + + if (intsts || aerr || prerr || rcvcp || lenerr) + err = 1; + + pr_info("PCEXC interrupt!!\n"); + pr_info("PEXINTSTS :0x%08x\n", intsts); + pr_info("PEXAERRSTS :0x%08x\n", aerr); + pr_info("PEXPRERRSTS :0x%08x\n", prerr); + pr_info("PEXRCVCPLIDA :0x%08x\n", rcvcp); + pr_info("PEXLENERRIDA :0x%08x\n", lenerr); + + /* print detail of Protection Error */ + if (intsts & 0x00004000) { + uint32_t i, n; + for (i = 0; i < 4; i++) { + n = 1 << i; + if (prerr & n) { + maea = PEX_IN(base, PEXMAEA(i)); + maec = PEX_IN(base, PEXMAEC(i)); + pr_info("PEXMAEC%d :0x%08x\n", i, maec); + pr_info("PEXMAEA%d :0x%08x\n", i, maea); + } + } + } + + if (err) + pciex_clear_intr_all(base); +} + +static irqreturn_t pciex_handle_internal_irq(int irq, void *dev_id) +{ + struct pci_controller *phb = dev_id; + + pr_debug("PCIEX:pciex_handle_internal_irq(irq=%d)\n", irq); + + BUG_ON(phb->cfg_addr == NULL); + + pciex_check_status(phb->cfg_addr); + + return IRQ_HANDLED; +} + +static __init int celleb_setup_pciex(struct device_node *node, + struct pci_controller *phb) +{ + struct resource r; + struct of_irq oirq; + int virq; + + /* SMMIO registers; used inside this file */ + if (of_address_to_resource(node, 0, &r)) { + pr_err("PCIEXC:Failed to get config resource.\n"); + return 1; + } + phb->cfg_addr = ioremap(r.start, r.end - r.start + 1); + if (!phb->cfg_addr) { + pr_err("PCIEXC:Failed to remap SMMIO region.\n"); + return 1; + } + + /* Not use cfg_data, cmd and data regs are near address reg */ + phb->cfg_data = NULL; + + /* set pci_ops */ + phb->ops = &scc_pciex_pci_ops; + + /* internal interrupt handler */ + if (of_irq_map_one(node, 1, &oirq)) { + pr_err("PCIEXC:Failed to map irq\n"); + goto error; + } + virq = irq_create_of_mapping(oirq.controller, oirq.specifier, + oirq.size); + if (request_irq(virq, pciex_handle_internal_irq, + IRQF_DISABLED, "pciex", (void *)phb)) { + pr_err("PCIEXC:Failed to request irq\n"); + goto error; + } + + /* enable all interrupts */ + pciex_clear_intr_all(phb->cfg_addr); + pciex_enable_intr_all(phb->cfg_addr); + /* MSI: TBD */ + + return 0; + +error: + phb->cfg_data = NULL; + if (phb->cfg_addr) + iounmap(phb->cfg_addr); + phb->cfg_addr = NULL; + return 1; +} + +struct celleb_phb_spec celleb_pciex_spec __initdata = { + .setup = celleb_setup_pciex, + .ops = &scc_pciex_ops, + .iowa_init = &scc_pciex_iowa_init, +}; diff --git a/arch/powerpc/platforms/celleb/scc_sio.c b/arch/powerpc/platforms/cell/celleb_scc_sio.c index 610008211ca1..3a16c5b3c464 100644 --- a/arch/powerpc/platforms/celleb/scc_sio.c +++ b/arch/powerpc/platforms/cell/celleb_scc_sio.c @@ -28,7 +28,7 @@ /* sio irq0=0xb00010022 irq0=0xb00010023 irq2=0xb00010024 mmio=0xfff000-0x1000,0xff2000-0x1000 */ -static int txx9_serial_bitmap __initdata = 0; +static int txx9_serial_bitmap __initdata; static struct { uint32_t offset; @@ -84,7 +84,7 @@ static int __init txx9_serial_config(char *ptr) int i; for (;;) { - switch(get_option(&ptr, &i)) { + switch (get_option(&ptr, &i)) { default: return 0; case 2: diff --git a/arch/powerpc/platforms/celleb/scc_uhc.c b/arch/powerpc/platforms/cell/celleb_scc_uhc.c index cb4307994087..d63b720bfe3a 100644 --- a/arch/powerpc/platforms/celleb/scc_uhc.c +++ b/arch/powerpc/platforms/cell/celleb_scc_uhc.c @@ -25,7 +25,7 @@ #include <asm/io.h> #include <asm/machdep.h> -#include "scc.h" +#include "celleb_scc.h" #define UHC_RESET_WAIT_MAX 10000 diff --git a/arch/powerpc/platforms/celleb/setup.c b/arch/powerpc/platforms/cell/celleb_setup.c index f27ae1e3fb58..b11cb30decb2 100644 --- a/arch/powerpc/platforms/celleb/setup.c +++ b/arch/powerpc/platforms/cell/celleb_setup.c @@ -56,13 +56,13 @@ #include <asm/rtas.h> #include <asm/cell-regs.h> -#include "interrupt.h" +#include "beat_interrupt.h" #include "beat_wrapper.h" #include "beat.h" -#include "pci.h" -#include "../cell/interrupt.h" -#include "../cell/pervasive.h" -#include "../cell/ras.h" +#include "celleb_pci.h" +#include "interrupt.h" +#include "pervasive.h" +#include "ras.h" static char celleb_machine_type[128] = "Celleb"; @@ -114,8 +114,6 @@ static int __init celleb_publish_devices(void) /* Publish OF platform devices for southbridge IOs */ of_platform_bus_probe(NULL, celleb_bus_ids, NULL); - celleb_pci_workaround_init(); - return 0; } machine_device_initcall(celleb_beat, celleb_publish_devices); diff --git a/arch/powerpc/platforms/cell/io-workarounds.c b/arch/powerpc/platforms/cell/io-workarounds.c index 979d4b67efb4..3b84e8be314c 100644 --- a/arch/powerpc/platforms/cell/io-workarounds.c +++ b/arch/powerpc/platforms/cell/io-workarounds.c @@ -1,6 +1,9 @@ /* + * Support PCI IO workaround + * * Copyright (C) 2006 Benjamin Herrenschmidt <benh@kernel.crashing.org> * IBM, Corp. + * (C) Copyright 2007-2008 TOSHIBA CORPORATION * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -9,335 +12,174 @@ #undef DEBUG #include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/pci.h> + #include <asm/io.h> #include <asm/machdep.h> -#include <asm/pci-bridge.h> +#include <asm/pgtable.h> #include <asm/ppc-pci.h> +#include "io-workarounds.h" -#define SPIDER_PCI_REG_BASE 0xd000 -#define SPIDER_PCI_VCI_CNTL_STAT 0x0110 -#define SPIDER_PCI_DUMMY_READ 0x0810 -#define SPIDER_PCI_DUMMY_READ_BASE 0x0814 +#define IOWA_MAX_BUS 8 -/* Undefine that to re-enable bogus prefetch - * - * Without that workaround, the chip will do bogus prefetch past - * page boundary from system memory. This setting will disable that, - * though the documentation is unclear as to the consequences of doing - * so, either purely performances, or possible misbehaviour... It's not - * clear wether the chip can handle unaligned accesses at all without - * prefetching enabled. - * - * For now, things appear to be behaving properly with that prefetching - * disabled and IDE, possibly because IDE isn't doing any unaligned - * access. - */ -#define SPIDER_DISABLE_PREFETCH +static struct iowa_bus iowa_busses[IOWA_MAX_BUS]; +static unsigned int iowa_bus_count; -#define MAX_SPIDERS 3 +static struct iowa_bus *iowa_pci_find(unsigned long vaddr, unsigned long paddr) +{ + int i, j; + struct resource *res; + unsigned long vstart, vend; -static struct spider_pci_bus { - void __iomem *regs; - unsigned long mmio_start; - unsigned long mmio_end; - unsigned long pio_vstart; - unsigned long pio_vend; -} spider_pci_busses[MAX_SPIDERS]; -static int spider_pci_count; + for (i = 0; i < iowa_bus_count; i++) { + struct iowa_bus *bus = &iowa_busses[i]; + struct pci_controller *phb = bus->phb; -static struct spider_pci_bus *spider_pci_find(unsigned long vaddr, - unsigned long paddr) -{ - int i; - - for (i = 0; i < spider_pci_count; i++) { - struct spider_pci_bus *bus = &spider_pci_busses[i]; - if (paddr && paddr >= bus->mmio_start && paddr < bus->mmio_end) - return bus; - if (vaddr && vaddr >= bus->pio_vstart && vaddr < bus->pio_vend) - return bus; + if (vaddr) { + vstart = (unsigned long)phb->io_base_virt; + vend = vstart + phb->pci_io_size - 1; + if ((vaddr >= vstart) && (vaddr <= vend)) + return bus; + } + + if (paddr) + for (j = 0; j < 3; j++) { + res = &phb->mem_resources[j]; + if (paddr >= res->start && paddr <= res->end) + return bus; + } } + return NULL; } -static void spider_io_flush(const volatile void __iomem *addr) +struct iowa_bus *iowa_mem_find_bus(const PCI_IO_ADDR addr) { - struct spider_pci_bus *bus; + struct iowa_bus *bus; int token; - /* Get platform token (set by ioremap) from address */ token = PCI_GET_ADDR_TOKEN(addr); - /* Fast path if we have a non-0 token, it indicates which bus we - * are on. - * - * If the token is 0, that means either that the ioremap was done - * before we initialized this layer, or it's a PIO operation. We - * fallback to a low path in this case. Hopefully, internal devices - * which are ioremap'ed early should use in_XX/out_XX functions - * instead of the PCI ones and thus not suffer from the slowdown. - * - * Also note that currently, the workaround will not work for areas - * that are not mapped with PTEs (bolted in the hash table). This - * is the case for ioremaps done very early at boot (before - * mem_init_done) and includes the mapping of the ISA IO space. - * - * Fortunately, none of the affected devices is expected to do DMA - * and thus there should be no problem in practice. - * - * In order to improve performances, we only do the PTE search for - * addresses falling in the PHB IO space area. That means it will - * not work for hotplug'ed PHBs but those don't exist with Spider. - */ - if (token && token <= spider_pci_count) - bus = &spider_pci_busses[token - 1]; + if (token && token <= iowa_bus_count) + bus = &iowa_busses[token - 1]; else { unsigned long vaddr, paddr; pte_t *ptep; - /* Fixup physical address */ vaddr = (unsigned long)PCI_FIX_ADDR(addr); + if (vaddr < PHB_IO_BASE || vaddr >= PHB_IO_END) + return NULL; - /* Check if it's in allowed range for PIO */ - if (vaddr < PHB_IO_BASE || vaddr > PHB_IO_END) - return; - - /* Try to find a PTE. If not, clear the paddr, we'll do - * a vaddr only lookup (PIO only) - */ ptep = find_linux_pte(init_mm.pgd, vaddr); if (ptep == NULL) paddr = 0; else paddr = pte_pfn(*ptep) << PAGE_SHIFT; + bus = iowa_pci_find(vaddr, paddr); - bus = spider_pci_find(vaddr, paddr); if (bus == NULL) - return; + return NULL; } - /* Now do the workaround - */ - (void)in_be32(bus->regs + SPIDER_PCI_DUMMY_READ); + return bus; } -static u8 spider_readb(const volatile void __iomem *addr) +struct iowa_bus *iowa_pio_find_bus(unsigned long port) { - u8 val = __do_readb(addr); - spider_io_flush(addr); - return val; + unsigned long vaddr = (unsigned long)pci_io_base + port; + return iowa_pci_find(vaddr, 0); } -static u16 spider_readw(const volatile void __iomem *addr) -{ - u16 val = __do_readw(addr); - spider_io_flush(addr); - return val; -} -static u32 spider_readl(const volatile void __iomem *addr) -{ - u32 val = __do_readl(addr); - spider_io_flush(addr); - return val; +#define DEF_PCI_AC_RET(name, ret, at, al, space, aa) \ +static ret iowa_##name at \ +{ \ + struct iowa_bus *bus; \ + bus = iowa_##space##_find_bus(aa); \ + if (bus && bus->ops && bus->ops->name) \ + return bus->ops->name al; \ + return __do_##name al; \ } -static u64 spider_readq(const volatile void __iomem *addr) -{ - u64 val = __do_readq(addr); - spider_io_flush(addr); - return val; +#define DEF_PCI_AC_NORET(name, at, al, space, aa) \ +static void iowa_##name at \ +{ \ + struct iowa_bus *bus; \ + bus = iowa_##space##_find_bus(aa); \ + if (bus && bus->ops && bus->ops->name) { \ + bus->ops->name al; \ + return; \ + } \ + __do_##name al; \ } -static u16 spider_readw_be(const volatile void __iomem *addr) -{ - u16 val = __do_readw_be(addr); - spider_io_flush(addr); - return val; -} +#include <asm/io-defs.h> -static u32 spider_readl_be(const volatile void __iomem *addr) -{ - u32 val = __do_readl_be(addr); - spider_io_flush(addr); - return val; -} +#undef DEF_PCI_AC_RET +#undef DEF_PCI_AC_NORET -static u64 spider_readq_be(const volatile void __iomem *addr) -{ - u64 val = __do_readq_be(addr); - spider_io_flush(addr); - return val; -} +static struct ppc_pci_io __initdata iowa_pci_io = { -static void spider_readsb(const volatile void __iomem *addr, void *buf, - unsigned long count) -{ - __do_readsb(addr, buf, count); - spider_io_flush(addr); -} +#define DEF_PCI_AC_RET(name, ret, at, al, space, aa) .name = iowa_##name, +#define DEF_PCI_AC_NORET(name, at, al, space, aa) .name = iowa_##name, -static void spider_readsw(const volatile void __iomem *addr, void *buf, - unsigned long count) -{ - __do_readsw(addr, buf, count); - spider_io_flush(addr); -} +#include <asm/io-defs.h> -static void spider_readsl(const volatile void __iomem *addr, void *buf, - unsigned long count) -{ - __do_readsl(addr, buf, count); - spider_io_flush(addr); -} - -static void spider_memcpy_fromio(void *dest, const volatile void __iomem *src, - unsigned long n) -{ - __do_memcpy_fromio(dest, src, n); - spider_io_flush(src); -} +#undef DEF_PCI_AC_RET +#undef DEF_PCI_AC_NORET +}; -static void __iomem * spider_ioremap(unsigned long addr, unsigned long size, - unsigned long flags) +static void __iomem *iowa_ioremap(unsigned long addr, unsigned long size, + unsigned long flags) { - struct spider_pci_bus *bus; + struct iowa_bus *bus; void __iomem *res = __ioremap(addr, size, flags); int busno; - pr_debug("spider_ioremap(0x%lx, 0x%lx, 0x%lx) -> 0x%p\n", - addr, size, flags, res); - - bus = spider_pci_find(0, addr); + bus = iowa_pci_find(0, addr); if (bus != NULL) { - busno = bus - spider_pci_busses; - pr_debug(" found bus %d, setting token\n", busno); + busno = bus - iowa_busses; PCI_SET_ADDR_TOKEN(res, busno + 1); } - pr_debug(" result=0x%p\n", res); - return res; } -static void __init spider_pci_setup_chip(struct spider_pci_bus *bus) -{ -#ifdef SPIDER_DISABLE_PREFETCH - u32 val = in_be32(bus->regs + SPIDER_PCI_VCI_CNTL_STAT); - pr_debug(" PVCI_Control_Status was 0x%08x\n", val); - out_be32(bus->regs + SPIDER_PCI_VCI_CNTL_STAT, val | 0x8); -#endif - - /* Configure the dummy address for the workaround */ - out_be32(bus->regs + SPIDER_PCI_DUMMY_READ_BASE, 0x80000000); -} - -static void __init spider_pci_add_one(struct pci_controller *phb) +/* Regist new bus to support workaround */ +void __init iowa_register_bus(struct pci_controller *phb, + struct ppc_pci_io *ops, + int (*initfunc)(struct iowa_bus *, void *), void *data) { - struct spider_pci_bus *bus = &spider_pci_busses[spider_pci_count]; + struct iowa_bus *bus; struct device_node *np = phb->dn; - struct resource rsrc; - void __iomem *regs; - if (spider_pci_count >= MAX_SPIDERS) { - printk(KERN_ERR "Too many spider bridges, workarounds" - " disabled for %s\n", np->full_name); + if (iowa_bus_count >= IOWA_MAX_BUS) { + pr_err("IOWA:Too many pci bridges, " + "workarounds disabled for %s\n", np->full_name); return; } - /* Get the registers for the beast */ - if (of_address_to_resource(np, 0, &rsrc)) { - printk(KERN_ERR "Failed to get registers for spider %s" - " workarounds disabled\n", np->full_name); - return; - } + bus = &iowa_busses[iowa_bus_count]; + bus->phb = phb; + bus->ops = ops; - /* Mask out some useless bits in there to get to the base of the - * spider chip - */ - rsrc.start &= ~0xfffffffful; - - /* Map them */ - regs = ioremap(rsrc.start + SPIDER_PCI_REG_BASE, 0x1000); - if (regs == NULL) { - printk(KERN_ERR "Failed to map registers for spider %s" - " workarounds disabled\n", np->full_name); - return; - } - - spider_pci_count++; - - /* We assume spiders only have one MMIO resource */ - bus->mmio_start = phb->mem_resources[0].start; - bus->mmio_end = phb->mem_resources[0].end + 1; - - bus->pio_vstart = (unsigned long)phb->io_base_virt; - bus->pio_vend = bus->pio_vstart + phb->pci_io_size; - - bus->regs = regs; - - printk(KERN_INFO "PCI: Spider MMIO workaround for %s\n",np->full_name); + if (initfunc) + if ((*initfunc)(bus, data)) + return; - pr_debug(" mmio (P) = 0x%016lx..0x%016lx\n", - bus->mmio_start, bus->mmio_end); - pr_debug(" pio (V) = 0x%016lx..0x%016lx\n", - bus->pio_vstart, bus->pio_vend); - pr_debug(" regs (P) = 0x%016lx (V) = 0x%p\n", - rsrc.start + SPIDER_PCI_REG_BASE, bus->regs); + iowa_bus_count++; - spider_pci_setup_chip(bus); + pr_debug("IOWA:[%d]Add bus, %s.\n", iowa_bus_count-1, np->full_name); } -static struct ppc_pci_io __initdata spider_pci_io = { - .readb = spider_readb, - .readw = spider_readw, - .readl = spider_readl, - .readq = spider_readq, - .readw_be = spider_readw_be, - .readl_be = spider_readl_be, - .readq_be = spider_readq_be, - .readsb = spider_readsb, - .readsw = spider_readsw, - .readsl = spider_readsl, - .memcpy_fromio = spider_memcpy_fromio, -}; - -static int __init spider_pci_workaround_init(void) +/* enable IO workaround */ +void __init io_workaround_init(void) { - struct pci_controller *phb; - - /* Find spider bridges. We assume they have been all probed - * in setup_arch(). If that was to change, we would need to - * update this code to cope with dynamically added busses - */ - list_for_each_entry(phb, &hose_list, list_node) { - struct device_node *np = phb->dn; - const char *model = of_get_property(np, "model", NULL); - - /* If no model property or name isn't exactly "pci", skip */ - if (model == NULL || strcmp(np->name, "pci")) - continue; - /* If model is not "Spider", skip */ - if (strcmp(model, "Spider")) - continue; - spider_pci_add_one(phb); - } - - /* No Spider PCI found, exit */ - if (spider_pci_count == 0) - return 0; + static int io_workaround_inited; - /* Setup IO callbacks. We only setup MMIO reads. PIO reads will - * fallback to MMIO reads (though without a token, thus slower) - */ - ppc_pci_io = spider_pci_io; - - /* Setup ioremap callback */ - ppc_md.ioremap = spider_ioremap; - - return 0; + if (io_workaround_inited) + return; + ppc_pci_io = iowa_pci_io; + ppc_md.ioremap = iowa_ioremap; + io_workaround_inited = 1; } -machine_arch_initcall(cell, spider_pci_workaround_init); diff --git a/arch/powerpc/platforms/cell/io-workarounds.h b/arch/powerpc/platforms/cell/io-workarounds.h new file mode 100644 index 000000000000..79d8ed3d510f --- /dev/null +++ b/arch/powerpc/platforms/cell/io-workarounds.h @@ -0,0 +1,49 @@ +/* + * Support PCI IO workaround + * + * (C) Copyright 2007-2008 TOSHIBA CORPORATION + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef _IO_WORKAROUNDS_H +#define _IO_WORKAROUNDS_H + +#include <linux/io.h> +#include <asm/pci-bridge.h> + +/* Bus info */ +struct iowa_bus { + struct pci_controller *phb; + struct ppc_pci_io *ops; + void *private; +}; + +void __init io_workaround_init(void); +void __init iowa_register_bus(struct pci_controller *, struct ppc_pci_io *, + int (*)(struct iowa_bus *, void *), void *); +struct iowa_bus *iowa_mem_find_bus(const PCI_IO_ADDR); +struct iowa_bus *iowa_pio_find_bus(unsigned long); + +extern struct ppc_pci_io spiderpci_ops; +extern int spiderpci_iowa_init(struct iowa_bus *, void *); + +#define SPIDER_PCI_REG_BASE 0xd000 +#define SPIDER_PCI_REG_SIZE 0x1000 +#define SPIDER_PCI_VCI_CNTL_STAT 0x0110 +#define SPIDER_PCI_DUMMY_READ 0x0810 +#define SPIDER_PCI_DUMMY_READ_BASE 0x0814 + +#endif /* _IO_WORKAROUNDS_H */ diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index edab631a8dcb..45646b2b4af4 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -28,13 +28,13 @@ #include <linux/notifier.h> #include <linux/of.h> #include <linux/of_platform.h> +#include <linux/lmb.h> #include <asm/prom.h> #include <asm/iommu.h> #include <asm/machdep.h> #include <asm/pci-bridge.h> #include <asm/udbg.h> -#include <asm/lmb.h> #include <asm/firmware.h> #include <asm/cell-regs.h> @@ -113,7 +113,7 @@ /* IOMMU sizing */ #define IO_SEGMENT_SHIFT 28 -#define IO_PAGENO_BITS (IO_SEGMENT_SHIFT - IOMMU_PAGE_SHIFT) +#define IO_PAGENO_BITS(shift) (IO_SEGMENT_SHIFT - (shift)) /* The high bit needs to be set on every DMA address */ #define SPIDER_DMA_OFFSET 0x80000000ul @@ -123,7 +123,6 @@ struct iommu_window { struct cbe_iommu *iommu; unsigned long offset; unsigned long size; - unsigned long pte_offset; unsigned int ioid; struct iommu_table table; }; @@ -200,7 +199,7 @@ static void tce_build_cell(struct iommu_table *tbl, long index, long npages, (window->ioid & IOPTE_IOID_Mask); #endif - io_pte = (unsigned long *)tbl->it_base + (index - window->pte_offset); + io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset); for (i = 0; i < npages; i++, uaddr += IOMMU_PAGE_SIZE) io_pte[i] = base_pte | (__pa(uaddr) & IOPTE_RPN_Mask); @@ -232,7 +231,7 @@ static void tce_free_cell(struct iommu_table *tbl, long index, long npages) | (window->ioid & IOPTE_IOID_Mask); #endif - io_pte = (unsigned long *)tbl->it_base + (index - window->pte_offset); + io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset); for (i = 0; i < npages; i++) io_pte[i] = pte; @@ -307,76 +306,84 @@ static int cell_iommu_find_ioc(int nid, unsigned long *base) return -ENODEV; } -static void cell_iommu_setup_page_tables(struct cbe_iommu *iommu, +static void cell_iommu_setup_stab(struct cbe_iommu *iommu, unsigned long dbase, unsigned long dsize, unsigned long fbase, unsigned long fsize) { struct page *page; - int i; - unsigned long reg, segments, pages_per_segment, ptab_size, stab_size, - n_pte_pages, base; - - base = dbase; - if (fsize != 0) - base = min(fbase, dbase); + unsigned long segments, stab_size; segments = max(dbase + dsize, fbase + fsize) >> IO_SEGMENT_SHIFT; - pages_per_segment = 1ull << IO_PAGENO_BITS; - pr_debug("%s: iommu[%d]: segments: %lu, pages per segment: %lu\n", - __FUNCTION__, iommu->nid, segments, pages_per_segment); + pr_debug("%s: iommu[%d]: segments: %lu\n", + __func__, iommu->nid, segments); /* set up the segment table */ stab_size = segments * sizeof(unsigned long); page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(stab_size)); BUG_ON(!page); iommu->stab = page_address(page); - clear_page(iommu->stab); + memset(iommu->stab, 0, stab_size); +} + +static unsigned long *cell_iommu_alloc_ptab(struct cbe_iommu *iommu, + unsigned long base, unsigned long size, unsigned long gap_base, + unsigned long gap_size, unsigned long page_shift) +{ + struct page *page; + int i; + unsigned long reg, segments, pages_per_segment, ptab_size, + n_pte_pages, start_seg, *ptab; + + start_seg = base >> IO_SEGMENT_SHIFT; + segments = size >> IO_SEGMENT_SHIFT; + pages_per_segment = 1ull << IO_PAGENO_BITS(page_shift); + /* PTEs for each segment must start on a 4K bounday */ + pages_per_segment = max(pages_per_segment, + (1 << 12) / sizeof(unsigned long)); - /* ... and the page tables. Since these are contiguous, we can treat - * the page tables as one array of ptes, like pSeries does. - */ ptab_size = segments * pages_per_segment * sizeof(unsigned long); - pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __FUNCTION__, + pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __func__, iommu->nid, ptab_size, get_order(ptab_size)); page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(ptab_size)); BUG_ON(!page); - iommu->ptab = page_address(page); - memset(iommu->ptab, 0, ptab_size); - - /* allocate a bogus page for the end of each mapping */ - page = alloc_pages_node(iommu->nid, GFP_KERNEL, 0); - BUG_ON(!page); - iommu->pad_page = page_address(page); - clear_page(iommu->pad_page); + ptab = page_address(page); + memset(ptab, 0, ptab_size); - /* number of pages needed for a page table */ - n_pte_pages = (pages_per_segment * - sizeof(unsigned long)) >> IOMMU_PAGE_SHIFT; + /* number of 4K pages needed for a page table */ + n_pte_pages = (pages_per_segment * sizeof(unsigned long)) >> 12; pr_debug("%s: iommu[%d]: stab at %p, ptab at %p, n_pte_pages: %lu\n", - __FUNCTION__, iommu->nid, iommu->stab, iommu->ptab, + __func__, iommu->nid, iommu->stab, ptab, n_pte_pages); /* initialise the STEs */ reg = IOSTE_V | ((n_pte_pages - 1) << 5); - if (IOMMU_PAGE_SIZE == 0x1000) - reg |= IOSTE_PS_4K; - else if (IOMMU_PAGE_SIZE == 0x10000) - reg |= IOSTE_PS_64K; - else { - extern void __unknown_page_size_error(void); - __unknown_page_size_error(); + switch (page_shift) { + case 12: reg |= IOSTE_PS_4K; break; + case 16: reg |= IOSTE_PS_64K; break; + case 20: reg |= IOSTE_PS_1M; break; + case 24: reg |= IOSTE_PS_16M; break; + default: BUG(); } + gap_base = gap_base >> IO_SEGMENT_SHIFT; + gap_size = gap_size >> IO_SEGMENT_SHIFT; + pr_debug("Setting up IOMMU stab:\n"); - for (i = base >> IO_SEGMENT_SHIFT; i < segments; i++) { - iommu->stab[i] = reg | - (__pa(iommu->ptab) + n_pte_pages * IOMMU_PAGE_SIZE * i); + for (i = start_seg; i < (start_seg + segments); i++) { + if (i >= gap_base && i < (gap_base + gap_size)) { + pr_debug("\toverlap at %d, skipping\n", i); + continue; + } + iommu->stab[i] = reg | (__pa(ptab) + (n_pte_pages << 12) * + (i - start_seg)); pr_debug("\t[%d] 0x%016lx\n", i, iommu->stab[i]); } + + return ptab; } static void cell_iommu_enable_hardware(struct cbe_iommu *iommu) @@ -387,7 +394,7 @@ static void cell_iommu_enable_hardware(struct cbe_iommu *iommu) if (cell_iommu_find_ioc(iommu->nid, &xlate_base)) panic("%s: missing IOC register mappings for node %d\n", - __FUNCTION__, iommu->nid); + __func__, iommu->nid); iommu->xlate_regs = ioremap(xlate_base, IOC_Reg_Size); iommu->cmd_regs = iommu->xlate_regs + IOC_IOCmd_Offset; @@ -423,7 +430,9 @@ static void cell_iommu_enable_hardware(struct cbe_iommu *iommu) static void cell_iommu_setup_hardware(struct cbe_iommu *iommu, unsigned long base, unsigned long size) { - cell_iommu_setup_page_tables(iommu, base, size, 0, 0); + cell_iommu_setup_stab(iommu, base, size, 0, 0); + iommu->ptab = cell_iommu_alloc_ptab(iommu, base, size, 0, 0, + IOMMU_PAGE_SHIFT); cell_iommu_enable_hardware(iommu); } @@ -464,6 +473,7 @@ cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np, unsigned long pte_offset) { struct iommu_window *window; + struct page *page; u32 ioid; ioid = cell_iommu_get_ioid(np); @@ -475,13 +485,11 @@ cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np, window->size = size; window->ioid = ioid; window->iommu = iommu; - window->pte_offset = pte_offset; window->table.it_blocksize = 16; window->table.it_base = (unsigned long)iommu->ptab; window->table.it_index = iommu->nid; - window->table.it_offset = (offset >> IOMMU_PAGE_SHIFT) + - window->pte_offset; + window->table.it_offset = (offset >> IOMMU_PAGE_SHIFT) + pte_offset; window->table.it_size = size >> IOMMU_PAGE_SHIFT; iommu_init_table(&window->table, iommu->nid); @@ -504,6 +512,11 @@ cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np, * This code also assumes that we have a window that starts at 0, * which is the case on all spider based blades. */ + page = alloc_pages_node(iommu->nid, GFP_KERNEL, 0); + BUG_ON(!page); + iommu->pad_page = page_address(page); + clear_page(iommu->pad_page); + __set_bit(0, window->table.it_map); tce_build_cell(&window->table, window->table.it_offset, 1, (unsigned long)iommu->pad_page, DMA_TO_DEVICE); @@ -549,7 +562,7 @@ static void cell_dma_dev_setup_iommu(struct device *dev) archdata->dma_data = &window->table; } -static void cell_dma_dev_setup_static(struct device *dev); +static void cell_dma_dev_setup_fixed(struct device *dev); static void cell_dma_dev_setup(struct device *dev) { @@ -557,7 +570,7 @@ static void cell_dma_dev_setup(struct device *dev) /* Order is important here, these are not mutually exclusive */ if (get_dma_ops(dev) == &dma_iommu_fixed_ops) - cell_dma_dev_setup_static(dev); + cell_dma_dev_setup_fixed(dev); else if (get_pci_dma_ops() == &dma_iommu_ops) cell_dma_dev_setup_iommu(dev); else if (get_pci_dma_ops() == &dma_direct_ops) @@ -789,17 +802,24 @@ static int __init cell_iommu_init_disabled(void) static u64 cell_iommu_get_fixed_address(struct device *dev) { - u64 cpu_addr, size, best_size, pci_addr = OF_BAD_ADDR; + u64 cpu_addr, size, best_size, dev_addr = OF_BAD_ADDR; struct device_node *np; const u32 *ranges = NULL; - int i, len, best; + int i, len, best, naddr, nsize, pna, range_size; np = of_node_get(dev->archdata.of_node); - while (np) { + while (1) { + naddr = of_n_addr_cells(np); + nsize = of_n_size_cells(np); + np = of_get_next_parent(np); + if (!np) + break; + ranges = of_get_property(np, "dma-ranges", &len); - if (ranges) + + /* Ignore empty ranges, they imply no translation required */ + if (ranges && len > 0) break; - np = of_get_next_parent(np); } if (!ranges) { @@ -809,15 +829,17 @@ static u64 cell_iommu_get_fixed_address(struct device *dev) len /= sizeof(u32); + pna = of_n_addr_cells(np); + range_size = naddr + nsize + pna; + /* dma-ranges format: - * 1 cell: pci space - * 2 cells: pci address - * 2 cells: parent address - * 2 cells: size + * child addr : naddr cells + * parent addr : pna cells + * size : nsize cells */ - for (i = 0, best = -1, best_size = 0; i < len; i += 7) { - cpu_addr = of_translate_dma_address(np, ranges +i + 3); - size = of_read_number(ranges + i + 5, 2); + for (i = 0, best = -1, best_size = 0; i < len; i += range_size) { + cpu_addr = of_translate_dma_address(np, ranges + i + naddr); + size = of_read_number(ranges + i + naddr + pna, nsize); if (cpu_addr == 0 && size > best_size) { best = i; @@ -825,15 +847,15 @@ static u64 cell_iommu_get_fixed_address(struct device *dev) } } - if (best >= 0) - pci_addr = of_read_number(ranges + best + 1, 2); - else + if (best >= 0) { + dev_addr = of_read_number(ranges + best, naddr); + } else dev_dbg(dev, "iommu: no suitable range found!\n"); out: of_node_put(np); - return pci_addr; + return dev_addr; } static int dma_set_mask_and_switch(struct device *dev, u64 dma_mask) @@ -858,7 +880,7 @@ static int dma_set_mask_and_switch(struct device *dev, u64 dma_mask) return 0; } -static void cell_dma_dev_setup_static(struct device *dev) +static void cell_dma_dev_setup_fixed(struct device *dev) { struct dev_archdata *archdata = &dev->archdata; u64 addr; @@ -869,35 +891,45 @@ static void cell_dma_dev_setup_static(struct device *dev) dev_dbg(dev, "iommu: fixed addr = %lx\n", addr); } +static void insert_16M_pte(unsigned long addr, unsigned long *ptab, + unsigned long base_pte) +{ + unsigned long segment, offset; + + segment = addr >> IO_SEGMENT_SHIFT; + offset = (addr >> 24) - (segment << IO_PAGENO_BITS(24)); + ptab = ptab + (segment * (1 << 12) / sizeof(unsigned long)); + + pr_debug("iommu: addr %lx ptab %p segment %lx offset %lx\n", + addr, ptab, segment, offset); + + ptab[offset] = base_pte | (__pa(addr) & IOPTE_RPN_Mask); +} + static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu, struct device_node *np, unsigned long dbase, unsigned long dsize, unsigned long fbase, unsigned long fsize) { - unsigned long base_pte, uaddr, *io_pte; - int i; + unsigned long base_pte, uaddr, ioaddr, *ptab; - dma_iommu_fixed_base = fbase; + ptab = cell_iommu_alloc_ptab(iommu, fbase, fsize, dbase, dsize, 24); - /* convert from bytes into page table indices */ - dbase = dbase >> IOMMU_PAGE_SHIFT; - dsize = dsize >> IOMMU_PAGE_SHIFT; - fbase = fbase >> IOMMU_PAGE_SHIFT; - fsize = fsize >> IOMMU_PAGE_SHIFT; + dma_iommu_fixed_base = fbase; pr_debug("iommu: mapping 0x%lx pages from 0x%lx\n", fsize, fbase); - io_pte = iommu->ptab; base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW | (cell_iommu_get_ioid(np) & IOPTE_IOID_Mask); - uaddr = 0; - for (i = fbase; i < fbase + fsize; i++, uaddr += IOMMU_PAGE_SIZE) { + for (uaddr = 0; uaddr < fsize; uaddr += (1 << 24)) { /* Don't touch the dynamic region */ - if (i >= dbase && i < (dbase + dsize)) { - pr_debug("iommu: static/dynamic overlap, skipping\n"); + ioaddr = uaddr + fbase; + if (ioaddr >= dbase && ioaddr < (dbase + dsize)) { + pr_debug("iommu: fixed/dynamic overlap, skipping\n"); continue; } - io_pte[i] = base_pte | (__pa(uaddr) & IOPTE_RPN_Mask); + + insert_16M_pte(uaddr, ptab, base_pte); } mb(); @@ -995,7 +1027,9 @@ static int __init cell_iommu_fixed_mapping_init(void) "fixed window 0x%lx-0x%lx\n", iommu->nid, dbase, dbase + dsize, fbase, fbase + fsize); - cell_iommu_setup_page_tables(iommu, dbase, dsize, fbase, fsize); + cell_iommu_setup_stab(iommu, dbase, dsize, fbase, fsize); + iommu->ptab = cell_iommu_alloc_ptab(iommu, dbase, dsize, 0, 0, + IOMMU_PAGE_SHIFT); cell_iommu_setup_fixed_ptab(iommu, np, dbase, dsize, fbase, fsize); cell_iommu_enable_hardware(iommu); diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c index 0304589c0a80..8a3631ce912b 100644 --- a/arch/powerpc/platforms/cell/pervasive.c +++ b/arch/powerpc/platforms/cell/pervasive.c @@ -65,7 +65,7 @@ static void cbe_power_save(void) break; default: printk(KERN_WARNING "%s: unknown configuration\n", - __FUNCTION__); + __func__); break; } mtspr(SPRN_TSC_CELL, thread_switch_control); diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c index e43024c0392e..655704ad03cf 100644 --- a/arch/powerpc/platforms/cell/ras.c +++ b/arch/powerpc/platforms/cell/ras.c @@ -132,7 +132,7 @@ static int __init cbe_ptcal_enable_on_node(int nid, int order) (unsigned int)(addr >> 32), (unsigned int)(addr & 0xffffffff))) { printk(KERN_ERR "%s: error enabling PTCAL on node %d!\n", - __FUNCTION__, nid); + __func__, nid); goto out_free_pages; } @@ -162,7 +162,7 @@ static int __init cbe_ptcal_enable(void) if (!size) return -ENODEV; - pr_debug("%s: enabling PTCAL, size = 0x%x\n", __FUNCTION__, *size); + pr_debug("%s: enabling PTCAL, size = 0x%x\n", __func__, *size); order = get_order(*size); of_node_put(np); @@ -180,7 +180,7 @@ static int __init cbe_ptcal_enable(void) const u32 *nid = of_get_property(np, "node-id", NULL); if (!nid) { printk(KERN_ERR "%s: node %s is missing node-id?\n", - __FUNCTION__, np->full_name); + __func__, np->full_name); continue; } cbe_ptcal_enable_on_node(*nid, order); @@ -195,13 +195,13 @@ static int cbe_ptcal_disable(void) struct ptcal_area *area, *tmp; int ret = 0; - pr_debug("%s: disabling PTCAL\n", __FUNCTION__); + pr_debug("%s: disabling PTCAL\n", __func__); list_for_each_entry_safe(area, tmp, &ptcal_list, list) { /* disable ptcal on this node */ if (rtas_call(ptcal_stop_tok, 1, 1, NULL, area->nid)) { printk(KERN_ERR "%s: error disabling PTCAL " - "on node %d!\n", __FUNCTION__, + "on node %d!\n", __func__, area->nid); ret = -EIO; continue; diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c index a7f609b3b876..ab721b50fbba 100644 --- a/arch/powerpc/platforms/cell/setup.c +++ b/arch/powerpc/platforms/cell/setup.c @@ -57,6 +57,7 @@ #include "interrupt.h" #include "pervasive.h" #include "ras.h" +#include "io-workarounds.h" #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -81,13 +82,86 @@ static void cell_progress(char *s, unsigned short hex) printk("*** %04x : %s\n", hex, s ? s : ""); } +static void cell_fixup_pcie_rootcomplex(struct pci_dev *dev) +{ + struct pci_controller *hose; + const char *s; + int i; + + if (!machine_is(cell)) + return; + + /* We're searching for a direct child of the PHB */ + if (dev->bus->self != NULL || dev->devfn != 0) + return; + + hose = pci_bus_to_host(dev->bus); + if (hose == NULL) + return; + + /* Only on PCIE */ + if (!of_device_is_compatible(hose->dn, "pciex")) + return; + + /* And only on axon */ + s = of_get_property(hose->dn, "model", NULL); + if (!s || strcmp(s, "Axon") != 0) + return; + + for (i = 0; i < PCI_BRIDGE_RESOURCES; i++) { + dev->resource[i].start = dev->resource[i].end = 0; + dev->resource[i].flags = 0; + } + + printk(KERN_DEBUG "PCI: Hiding resources on Axon PCIE RC %s\n", + pci_name(dev)); +} +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, cell_fixup_pcie_rootcomplex); + +static int __devinit cell_setup_phb(struct pci_controller *phb) +{ + const char *model; + struct device_node *np; + + int rc = rtas_setup_phb(phb); + if (rc) + return rc; + + np = phb->dn; + model = of_get_property(np, "model", NULL); + if (model == NULL || strcmp(np->name, "pci")) + return 0; + + /* Setup workarounds for spider */ + if (strcmp(model, "Spider")) + return 0; + + iowa_register_bus(phb, &spiderpci_ops, &spiderpci_iowa_init, + (void *)SPIDER_PCI_REG_BASE); + io_workaround_init(); + + return 0; +} + static int __init cell_publish_devices(void) { + struct device_node *root = of_find_node_by_path("/"); + struct device_node *np; int node; /* Publish OF platform devices for southbridge IOs */ of_platform_bus_probe(NULL, NULL, NULL); + /* On spider based blades, we need to manually create the OF + * platform devices for the PCI host bridges + */ + for_each_child_of_node(root, np) { + if (np->type == NULL || (strcmp(np->type, "pci") != 0 && + strcmp(np->type, "pciex") != 0)) + continue; + of_platform_device_create(np, NULL, NULL); + } + /* There is no device for the MIC memory controller, thus we create * a platform device for it to attach the EDAC driver to. */ @@ -96,6 +170,7 @@ static int __init cell_publish_devices(void) continue; platform_device_register_simple("cbe-mic", node, NULL, 0); } + return 0; } machine_subsys_initcall(cell, cell_publish_devices); @@ -149,6 +224,11 @@ static void __init cell_init_irq(void) mpic_init_IRQ(); } +static void __init cell_set_dabrx(void) +{ + mtspr(SPRN_DABRX, DABRX_KERNEL | DABRX_USER); +} + static void __init cell_setup_arch(void) { #ifdef CONFIG_SPU_BASE @@ -158,6 +238,8 @@ static void __init cell_setup_arch(void) cbe_regs_init(); + cell_set_dabrx(); + #ifdef CONFIG_CBE_RAS cbe_ras_init(); #endif @@ -170,7 +252,7 @@ static void __init cell_setup_arch(void) /* Find and initialize PCI host bridges */ init_pci_config_tokens(); - find_and_init_phbs(); + cbe_pervasive_init(); #ifdef CONFIG_DUMMY_CONSOLE conswitchp = &dummy_con; @@ -206,7 +288,7 @@ define_machine(cell) { .calibrate_decr = generic_calibrate_decr, .progress = cell_progress, .init_IRQ = cell_init_irq, - .pci_setup_phb = rtas_setup_phb, + .pci_setup_phb = cell_setup_phb, #ifdef CONFIG_KEXEC .machine_kexec = default_machine_kexec, .machine_kexec_prepare = default_machine_kexec_prepare, diff --git a/arch/powerpc/platforms/cell/spider-pci.c b/arch/powerpc/platforms/cell/spider-pci.c new file mode 100644 index 000000000000..418b605ac35a --- /dev/null +++ b/arch/powerpc/platforms/cell/spider-pci.c @@ -0,0 +1,184 @@ +/* + * IO workarounds for PCI on Celleb/Cell platform + * + * (C) Copyright 2006-2007 TOSHIBA CORPORATION + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#undef DEBUG + +#include <linux/kernel.h> +#include <linux/of_platform.h> +#include <linux/io.h> + +#include <asm/ppc-pci.h> +#include <asm/pci-bridge.h> + +#include "io-workarounds.h" + +#define SPIDER_PCI_DISABLE_PREFETCH + +struct spiderpci_iowa_private { + void __iomem *regs; +}; + +static void spiderpci_io_flush(struct iowa_bus *bus) +{ + struct spiderpci_iowa_private *priv; + u32 val; + + priv = bus->private; + val = in_be32(priv->regs + SPIDER_PCI_DUMMY_READ); + iosync(); +} + +#define SPIDER_PCI_MMIO_READ(name, ret) \ +static ret spiderpci_##name(const PCI_IO_ADDR addr) \ +{ \ + ret val = __do_##name(addr); \ + spiderpci_io_flush(iowa_mem_find_bus(addr)); \ + return val; \ +} + +#define SPIDER_PCI_MMIO_READ_STR(name) \ +static void spiderpci_##name(const PCI_IO_ADDR addr, void *buf, \ + unsigned long count) \ +{ \ + __do_##name(addr, buf, count); \ + spiderpci_io_flush(iowa_mem_find_bus(addr)); \ +} + +SPIDER_PCI_MMIO_READ(readb, u8) +SPIDER_PCI_MMIO_READ(readw, u16) +SPIDER_PCI_MMIO_READ(readl, u32) +SPIDER_PCI_MMIO_READ(readq, u64) +SPIDER_PCI_MMIO_READ(readw_be, u16) +SPIDER_PCI_MMIO_READ(readl_be, u32) +SPIDER_PCI_MMIO_READ(readq_be, u64) +SPIDER_PCI_MMIO_READ_STR(readsb) +SPIDER_PCI_MMIO_READ_STR(readsw) +SPIDER_PCI_MMIO_READ_STR(readsl) + +static void spiderpci_memcpy_fromio(void *dest, const PCI_IO_ADDR src, + unsigned long n) +{ + __do_memcpy_fromio(dest, src, n); + spiderpci_io_flush(iowa_mem_find_bus(src)); +} + +static int __init spiderpci_pci_setup_chip(struct pci_controller *phb, + void __iomem *regs) +{ + void *dummy_page_va; + dma_addr_t dummy_page_da; + +#ifdef SPIDER_PCI_DISABLE_PREFETCH + u32 val = in_be32(regs + SPIDER_PCI_VCI_CNTL_STAT); + pr_debug("SPIDER_IOWA:PVCI_Control_Status was 0x%08x\n", val); + out_be32(regs + SPIDER_PCI_VCI_CNTL_STAT, val | 0x8); +#endif /* SPIDER_PCI_DISABLE_PREFETCH */ + + /* setup dummy read */ + /* + * On CellBlade, we can't know that which XDR memory is used by + * kmalloc() to allocate dummy_page_va. + * In order to imporve the performance, the XDR which is used to + * allocate dummy_page_va is the nearest the spider-pci. + * We have to select the CBE which is the nearest the spider-pci + * to allocate memory from the best XDR, but I don't know that + * how to do. + * + * Celleb does not have this problem, because it has only one XDR. + */ + dummy_page_va = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!dummy_page_va) { + pr_err("SPIDERPCI-IOWA:Alloc dummy_page_va failed.\n"); + return -1; + } + + dummy_page_da = dma_map_single(phb->parent, dummy_page_va, + PAGE_SIZE, DMA_FROM_DEVICE); + if (dma_mapping_error(dummy_page_da)) { + pr_err("SPIDER-IOWA:Map dummy page filed.\n"); + kfree(dummy_page_va); + return -1; + } + + out_be32(regs + SPIDER_PCI_DUMMY_READ_BASE, dummy_page_da); + + return 0; +} + +int __init spiderpci_iowa_init(struct iowa_bus *bus, void *data) +{ + void __iomem *regs = NULL; + struct spiderpci_iowa_private *priv; + struct device_node *np = bus->phb->dn; + struct resource r; + unsigned long offset = (unsigned long)data; + + pr_debug("SPIDERPCI-IOWA:Bus initialize for spider(%s)\n", + np->full_name); + + priv = kzalloc(sizeof(struct spiderpci_iowa_private), GFP_KERNEL); + if (!priv) { + pr_err("SPIDERPCI-IOWA:" + "Can't allocate struct spiderpci_iowa_private"); + return -1; + } + + if (of_address_to_resource(np, 0, &r)) { + pr_err("SPIDERPCI-IOWA:Can't get resource.\n"); + goto error; + } + + regs = ioremap(r.start + offset, SPIDER_PCI_REG_SIZE); + if (!regs) { + pr_err("SPIDERPCI-IOWA:ioremap failed.\n"); + goto error; + } + priv->regs = regs; + bus->private = priv; + + if (spiderpci_pci_setup_chip(bus->phb, regs)) + goto error; + + return 0; + +error: + kfree(priv); + bus->private = NULL; + + if (regs) + iounmap(regs); + + return -1; +} + +struct ppc_pci_io spiderpci_ops = { + .readb = spiderpci_readb, + .readw = spiderpci_readw, + .readl = spiderpci_readl, + .readq = spiderpci_readq, + .readw_be = spiderpci_readw_be, + .readl_be = spiderpci_readl_be, + .readq_be = spiderpci_readq_be, + .readsb = spiderpci_readsb, + .readsw = spiderpci_readsw, + .readsl = spiderpci_readsl, + .memcpy_fromio = spiderpci_memcpy_fromio, +}; + diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index 87eb07f94c5f..6bab44b7716b 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -81,9 +81,12 @@ struct spu_slb { void spu_invalidate_slbs(struct spu *spu) { struct spu_priv2 __iomem *priv2 = spu->priv2; + unsigned long flags; + spin_lock_irqsave(&spu->register_lock, flags); if (spu_mfc_sr1_get(spu) & MFC_STATE1_RELOCATE_MASK) out_be64(&priv2->slb_invalidate_all_W, 0UL); + spin_unlock_irqrestore(&spu->register_lock, flags); } EXPORT_SYMBOL_GPL(spu_invalidate_slbs); @@ -148,7 +151,11 @@ static inline void spu_load_slb(struct spu *spu, int slbe, struct spu_slb *slb) __func__, slbe, slb->vsid, slb->esid); out_be64(&priv2->slb_index_W, slbe); + /* set invalid before writing vsid */ + out_be64(&priv2->slb_esid_RW, 0); + /* now it's safe to write the vsid */ out_be64(&priv2->slb_vsid_RW, slb->vsid); + /* setting the new esid makes the entry valid again */ out_be64(&priv2->slb_esid_RW, slb->esid); } @@ -158,7 +165,7 @@ static int __spu_trap_data_seg(struct spu *spu, unsigned long ea) struct spu_slb slb; int psize; - pr_debug("%s\n", __FUNCTION__); + pr_debug("%s\n", __func__); slb.esid = (ea & ESID_MASK) | SLB_ESID_V; @@ -208,7 +215,7 @@ static int __spu_trap_data_seg(struct spu *spu, unsigned long ea) extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap); //XXX static int __spu_trap_data_map(struct spu *spu, unsigned long ea, u64 dsisr) { - pr_debug("%s, %lx, %lx\n", __FUNCTION__, dsisr, ea); + pr_debug("%s, %lx, %lx\n", __func__, dsisr, ea); /* Handle kernel space hash faults immediately. User hash faults need to be deferred to process context. */ @@ -290,9 +297,11 @@ void spu_setup_kernel_slbs(struct spu *spu, struct spu_lscsa *lscsa, nr_slbs++; } + spin_lock_irq(&spu->register_lock); /* Add the set of SLBs */ for (i = 0; i < nr_slbs; i++) spu_load_slb(spu, i, &slbs[i]); + spin_unlock_irq(&spu->register_lock); } EXPORT_SYMBOL_GPL(spu_setup_kernel_slbs); @@ -337,13 +346,14 @@ spu_irq_class_1(int irq, void *data) if (stat & CLASS1_STORAGE_FAULT_INTR) spu_mfc_dsisr_set(spu, 0ul); spu_int_stat_clear(spu, 1, stat); - spin_unlock(&spu->register_lock); - pr_debug("%s: %lx %lx %lx %lx\n", __FUNCTION__, mask, stat, - dar, dsisr); if (stat & CLASS1_SEGMENT_FAULT_INTR) __spu_trap_data_seg(spu, dar); + spin_unlock(&spu->register_lock); + pr_debug("%s: %lx %lx %lx %lx\n", __func__, mask, stat, + dar, dsisr); + if (stat & CLASS1_STORAGE_FAULT_INTR) __spu_trap_data_map(spu, dar, dsisr); @@ -716,7 +726,7 @@ static int __init init_spu_base(void) if (ret < 0) { printk(KERN_WARNING "%s: Error initializing spus\n", - __FUNCTION__); + __func__); goto out_unregister_sysdev_class; } diff --git a/arch/powerpc/platforms/cell/spu_callbacks.c b/arch/powerpc/platforms/cell/spu_callbacks.c index dceb8b6a9382..19f6bfdbb933 100644 --- a/arch/powerpc/platforms/cell/spu_callbacks.c +++ b/arch/powerpc/platforms/cell/spu_callbacks.c @@ -54,7 +54,7 @@ long spu_sys_callback(struct spu_syscall_block *s) long (*syscall)(u64 a1, u64 a2, u64 a3, u64 a4, u64 a5, u64 a6); if (s->nr_ret >= ARRAY_SIZE(spu_syscall_table)) { - pr_debug("%s: invalid syscall #%ld", __FUNCTION__, s->nr_ret); + pr_debug("%s: invalid syscall #%ld", __func__, s->nr_ret); return -ENOSYS; } diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c index d351bdebf5f1..4c506c1463cd 100644 --- a/arch/powerpc/platforms/cell/spu_manage.c +++ b/arch/powerpc/platforms/cell/spu_manage.c @@ -92,7 +92,7 @@ static int __init spu_map_interrupts_old(struct spu *spu, tmp = of_get_property(np->parent->parent, "node-id", NULL); if (!tmp) { - printk(KERN_WARNING "%s: can't find node-id\n", __FUNCTION__); + printk(KERN_WARNING "%s: can't find node-id\n", __func__); nid = spu->node; } else nid = tmp[0]; @@ -296,7 +296,7 @@ static int __init of_enumerate_spus(int (*fn)(void *data)) ret = fn(node); if (ret) { printk(KERN_WARNING "%s: Error initializing %s\n", - __FUNCTION__, node->name); + __func__, node->name); break; } n++; @@ -327,7 +327,7 @@ static int __init of_create_spu(struct spu *spu, void *data) if (!legacy_map) { legacy_map = 1; printk(KERN_WARNING "%s: Legacy device tree found, " - "trying to map old style\n", __FUNCTION__); + "trying to map old style\n", __func__); } ret = spu_map_device_old(spu); if (ret) { @@ -342,7 +342,7 @@ static int __init of_create_spu(struct spu *spu, void *data) if (!legacy_irq) { legacy_irq = 1; printk(KERN_WARNING "%s: Legacy device tree found, " - "trying old style irq\n", __FUNCTION__); + "trying old style irq\n", __func__); } ret = spu_map_interrupts_old(spu, spe); if (ret) { diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index 133995ed5cc7..0ad83aeb70b1 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -109,13 +109,12 @@ void spu_forget(struct spu_context *ctx) /* * This is basically an open-coded spu_acquire_saved, except that - * we don't acquire the state mutex interruptible. + * we don't acquire the state mutex interruptible, and we don't + * want this context to be rescheduled on release. */ mutex_lock(&ctx->state_mutex); - if (ctx->state != SPU_STATE_SAVED) { - set_bit(SPU_SCHED_WAS_ACTIVE, &ctx->sched_flags); + if (ctx->state != SPU_STATE_SAVED) spu_deactivate(ctx); - } mm = ctx->owner; ctx->owner = NULL; @@ -171,7 +170,8 @@ void spu_release_saved(struct spu_context *ctx) { BUG_ON(ctx->state != SPU_STATE_SAVED); - if (test_and_clear_bit(SPU_SCHED_WAS_ACTIVE, &ctx->sched_flags)) + if (test_and_clear_bit(SPU_SCHED_WAS_ACTIVE, &ctx->sched_flags) && + test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags)) spu_activate(ctx, 0); spu_release(ctx); diff --git a/arch/powerpc/platforms/cell/spufs/coredump.c b/arch/powerpc/platforms/cell/spufs/coredump.c index 0c6a96b82b2d..b962c3ab470c 100644 --- a/arch/powerpc/platforms/cell/spufs/coredump.c +++ b/arch/powerpc/platforms/cell/spufs/coredump.c @@ -133,8 +133,6 @@ static struct spu_context *coredump_next_context(int *fd) if (ctx->flags & SPU_CREATE_NOSCHED) continue; - /* start searching the next fd next time we're called */ - (*fd)++; break; } @@ -157,6 +155,9 @@ int spufs_coredump_extra_notes_size(void) break; size += rc; + + /* start searching the next fd next time */ + fd++; } return size; @@ -239,6 +240,9 @@ int spufs_coredump_extra_notes_write(struct file *file, loff_t *foffset) } spu_release_saved(ctx); + + /* start searching the next fd next time */ + fd++; } return 0; diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index c66c3756970d..08f44d1971ac 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -32,7 +32,6 @@ #include <linux/marker.h> #include <asm/io.h> -#include <asm/semaphore.h> #include <asm/spu.h> #include <asm/spu_info.h> #include <asm/uaccess.h> @@ -367,6 +366,13 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma, return NOPFN_SIGBUS; /* + * Because we release the mmap_sem, the context may be destroyed while + * we're in spu_wait. Grab an extra reference so it isn't destroyed + * in the meantime. + */ + get_spu_context(ctx); + + /* * We have to wait for context to be loaded before we have * pages to hand out to the user, but we don't want to wait * with the mmap_sem held. @@ -375,7 +381,7 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma, * hanged. */ if (spu_acquire(ctx)) - return NOPFN_REFAULT; + goto refault; if (ctx->state == SPU_STATE_SAVED) { up_read(¤t->mm->mmap_sem); @@ -391,6 +397,9 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma, if (!ret) spu_release(ctx); + +refault: + put_spu_context(ctx); return NOPFN_REFAULT; } @@ -1327,7 +1336,7 @@ static u64 spufs_signal1_type_get(struct spu_context *ctx) return ctx->ops->signal1_type_get(ctx); } DEFINE_SPUFS_ATTRIBUTE(spufs_signal1_type, spufs_signal1_type_get, - spufs_signal1_type_set, "%llu", SPU_ATTR_ACQUIRE); + spufs_signal1_type_set, "%llu\n", SPU_ATTR_ACQUIRE); static int spufs_signal2_type_set(void *data, u64 val) @@ -1349,7 +1358,7 @@ static u64 spufs_signal2_type_get(struct spu_context *ctx) return ctx->ops->signal2_type_get(ctx); } DEFINE_SPUFS_ATTRIBUTE(spufs_signal2_type, spufs_signal2_type_get, - spufs_signal2_type_set, "%llu", SPU_ATTR_ACQUIRE); + spufs_signal2_type_set, "%llu\n", SPU_ATTR_ACQUIRE); #if SPUFS_MMAP_4K static unsigned long spufs_mss_mmap_nopfn(struct vm_area_struct *vma, @@ -1546,7 +1555,7 @@ void spufs_mfc_callback(struct spu *spu) wake_up_all(&ctx->mfc_wq); - pr_debug("%s %s\n", __FUNCTION__, spu->name); + pr_debug("%s %s\n", __func__, spu->name); if (ctx->mfc_fasync) { u32 free_elements, tagstatus; unsigned int mask; @@ -1780,7 +1789,7 @@ static unsigned int spufs_mfc_poll(struct file *file,poll_table *wait) if (tagstatus & ctx->tagwait) mask |= POLLIN | POLLRDNORM; - pr_debug("%s: free %d tagstatus %d tagwait %d\n", __FUNCTION__, + pr_debug("%s: free %d tagstatus %d tagwait %d\n", __func__, free_elements, tagstatus, ctx->tagwait); return mask; diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c index 6d1228c66c5e..0c32a05ab068 100644 --- a/arch/powerpc/platforms/cell/spufs/inode.c +++ b/arch/powerpc/platforms/cell/spufs/inode.c @@ -35,7 +35,6 @@ #include <linux/parser.h> #include <asm/prom.h> -#include <asm/semaphore.h> #include <asm/spu.h> #include <asm/spu_priv1.h> #include <asm/uaccess.h> diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index 6221968c2a3c..96bf7c2b86fc 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -98,7 +98,7 @@ static int spu_setup_isolated(struct spu_context *ctx) != MFC_CNTL_PURGE_DMA_COMPLETE) { if (time_after(jiffies, timeout)) { printk(KERN_ERR "%s: timeout flushing MFC DMA queue\n", - __FUNCTION__); + __func__); ret = -EIO; goto out; } @@ -124,7 +124,7 @@ static int spu_setup_isolated(struct spu_context *ctx) status_loading) { if (time_after(jiffies, timeout)) { printk(KERN_ERR "%s: timeout waiting for loader\n", - __FUNCTION__); + __func__); ret = -EIO; goto out_drop_priv; } @@ -134,7 +134,7 @@ static int spu_setup_isolated(struct spu_context *ctx) if (!(status & SPU_STATUS_RUNNING)) { /* If isolated LOAD has failed: run SPU, we will get a stop-and * signal later. */ - pr_debug("%s: isolated LOAD failed\n", __FUNCTION__); + pr_debug("%s: isolated LOAD failed\n", __func__); ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE); ret = -EACCES; goto out_drop_priv; @@ -142,7 +142,7 @@ static int spu_setup_isolated(struct spu_context *ctx) if (!(status & SPU_STATUS_ISOLATED_STATE)) { /* This isn't allowed by the CBEA, but check anyway */ - pr_debug("%s: SPU fell out of isolated mode?\n", __FUNCTION__); + pr_debug("%s: SPU fell out of isolated mode?\n", __func__); ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_STOP); ret = -EINVAL; goto out_drop_priv; @@ -220,6 +220,7 @@ static int spu_run_init(struct spu_context *ctx, u32 *npc) } } + set_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags); return 0; } @@ -234,7 +235,7 @@ static int spu_run_fini(struct spu_context *ctx, u32 *npc, *npc = ctx->ops->npc_read(ctx); spuctx_switch_state(ctx, SPU_UTIL_IDLE_LOADED); - ctx->policy = SCHED_IDLE; + clear_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags); spu_release(ctx); if (signal_pending(current)) @@ -281,7 +282,7 @@ static int spu_handle_restartsys(struct spu_context *ctx, long *spu_ret, break; default: printk(KERN_WARNING "%s: unexpected return code %ld\n", - __FUNCTION__, *spu_ret); + __func__, *spu_ret); ret = 0; } return ret; @@ -322,6 +323,10 @@ static int spu_process_callback(struct spu_context *ctx) return -EINTR; } + /* need to re-get the ls, as it may have changed when we released the + * spu */ + ls = (void __iomem *)ctx->ops->get_ls(ctx); + /* write result, jump over indirect pointer */ memcpy_toio(ls + ls_pointer, &spu_ret, sizeof(spu_ret)); ctx->ops->npc_write(ctx, npc); diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 3a5972117de7..00528ef84ad2 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -246,7 +246,7 @@ static void spu_bind_context(struct spu *spu, struct spu_context *ctx) spu_switch_notify(spu, ctx); ctx->state = SPU_STATE_RUNNABLE; - spuctx_switch_state(ctx, SPU_UTIL_IDLE_LOADED); + spuctx_switch_state(ctx, SPU_UTIL_USER); } /* @@ -867,7 +867,7 @@ static noinline void spusched_tick(struct spu_context *ctx) if (ctx->policy == SCHED_FIFO) goto out; - if (--ctx->time_slice && ctx->policy != SCHED_IDLE) + if (--ctx->time_slice && test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags)) goto out; spu = ctx->spu; @@ -877,7 +877,7 @@ static noinline void spusched_tick(struct spu_context *ctx) new = grab_runnable_context(ctx->prio + 1, spu->node); if (new) { spu_unschedule(spu, ctx); - if (ctx->policy != SCHED_IDLE) + if (test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags)) spu_add_to_rq(ctx); } else { spu_context_nospu_trace(spusched_tick__newslice, ctx); diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 2c2fe3c07d72..cdc515182f82 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -44,6 +44,7 @@ struct spu_gang; enum { SPU_SCHED_NOTIFY_ACTIVE, SPU_SCHED_WAS_ACTIVE, /* was active upon spu_acquire_saved() */ + SPU_SCHED_SPU_RUN, /* context is within spu_run */ }; struct spu_context { diff --git a/arch/powerpc/platforms/cell/spufs/sputrace.c b/arch/powerpc/platforms/cell/spufs/sputrace.c index 01974f7776e1..79aa773f3c99 100644 --- a/arch/powerpc/platforms/cell/spufs/sputrace.c +++ b/arch/powerpc/platforms/cell/spufs/sputrace.c @@ -58,12 +58,12 @@ static int sputrace_sprint(char *tbuf, int n) ktime_to_timespec(ktime_sub(t->tstamp, sputrace_start)); return snprintf(tbuf, n, - "[%lu.%09lu] %d: %s (thread = %d, spu = %d)\n", + "[%lu.%09lu] %d: %s (ctxthread = %d, spu = %d)\n", (unsigned long) tv.tv_sec, (unsigned long) tv.tv_nsec, - t->owner_tid, - t->name, t->curr_tid, + t->name, + t->owner_tid, t->number); } @@ -188,6 +188,7 @@ struct spu_probe spu_probes[] = { { "spufs_ps_nopfn__insert", "%p %p", spu_context_event }, { "spu_acquire_saved__enter", "%p", spu_context_nospu_event }, { "destroy_spu_context__enter", "%p", spu_context_nospu_event }, + { "spufs_stop_callback__enter", "%p %p", spu_context_event }, }; static int __init sputrace_init(void) diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c index 6f5886c7b1f9..d2a1249d36dd 100644 --- a/arch/powerpc/platforms/cell/spufs/switch.c +++ b/arch/powerpc/platforms/cell/spufs/switch.c @@ -34,6 +34,7 @@ #include <linux/module.h> #include <linux/errno.h> +#include <linux/hardirq.h> #include <linux/sched.h> #include <linux/kernel.h> #include <linux/mm.h> @@ -117,6 +118,8 @@ static inline void disable_interrupts(struct spu_state *csa, struct spu *spu) * Write INT_MASK_class1 with value of 0. * Save INT_Mask_class2 in CSA. * Write INT_MASK_class2 with value of 0. + * Synchronize all three interrupts to be sure + * we no longer execute a handler on another CPU. */ spin_lock_irq(&spu->register_lock); if (csa) { @@ -129,6 +132,9 @@ static inline void disable_interrupts(struct spu_state *csa, struct spu *spu) spu_int_mask_set(spu, 2, 0ul); eieio(); spin_unlock_irq(&spu->register_lock); + synchronize_irq(spu->irqs[0]); + synchronize_irq(spu->irqs[1]); + synchronize_irq(spu->irqs[2]); } static inline void set_watchdog_timer(struct spu_state *csa, struct spu *spu) @@ -1809,6 +1815,7 @@ static void save_csa(struct spu_state *prev, struct spu *spu) save_mfc_csr_ato(prev, spu); /* Step 24. */ save_mfc_tclass_id(prev, spu); /* Step 25. */ set_mfc_tclass_id(prev, spu); /* Step 26. */ + save_mfc_cmd(prev, spu); /* Step 26a - moved from 44. */ purge_mfc_queue(prev, spu); /* Step 27. */ wait_purge_complete(prev, spu); /* Step 28. */ setup_mfc_sr1(prev, spu); /* Step 30. */ @@ -1825,7 +1832,6 @@ static void save_csa(struct spu_state *prev, struct spu *spu) save_ppuint_mb(prev, spu); /* Step 41. */ save_ch_part1(prev, spu); /* Step 42. */ save_spu_mb(prev, spu); /* Step 43. */ - save_mfc_cmd(prev, spu); /* Step 44. */ reset_ch(prev, spu); /* Step 45. */ } diff --git a/arch/powerpc/platforms/celleb/Kconfig b/arch/powerpc/platforms/celleb/Kconfig deleted file mode 100644 index 372891edcdd2..000000000000 --- a/arch/powerpc/platforms/celleb/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -config PPC_CELLEB - bool "Toshiba's Cell Reference Set 'Celleb' Architecture" - depends on PPC_MULTIPLATFORM && PPC64 - select PPC_CELL - select PPC_CELL_NATIVE - select PPC_RTAS - select PPC_INDIRECT_IO - select PPC_OF_PLATFORM_PCI - select HAS_TXX9_SERIAL - select PPC_UDBG_BEAT - select USB_OHCI_BIG_ENDIAN_MMIO - select USB_EHCI_BIG_ENDIAN_MMIO diff --git a/arch/powerpc/platforms/celleb/Makefile b/arch/powerpc/platforms/celleb/Makefile deleted file mode 100644 index 889d43f715ea..000000000000 --- a/arch/powerpc/platforms/celleb/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -obj-y += interrupt.o iommu.o setup.o \ - htab.o beat.o hvCall.o pci.o \ - scc_epci.o scc_uhc.o \ - io-workarounds.o - -obj-$(CONFIG_SMP) += smp.o -obj-$(CONFIG_PPC_UDBG_BEAT) += udbg_beat.o -obj-$(CONFIG_SERIAL_TXX9) += scc_sio.o -obj-$(CONFIG_SPU_BASE) += spu_priv1.o diff --git a/arch/powerpc/platforms/celleb/io-workarounds.c b/arch/powerpc/platforms/celleb/io-workarounds.c deleted file mode 100644 index 423339be1bac..000000000000 --- a/arch/powerpc/platforms/celleb/io-workarounds.c +++ /dev/null @@ -1,280 +0,0 @@ -/* - * Support for Celleb io workarounds - * - * (C) Copyright 2006-2007 TOSHIBA CORPORATION - * - * This file is based to arch/powerpc/platform/cell/io-workarounds.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#undef DEBUG - -#include <linux/of.h> -#include <linux/of_device.h> -#include <linux/irq.h> - -#include <asm/io.h> -#include <asm/prom.h> -#include <asm/machdep.h> -#include <asm/pci-bridge.h> -#include <asm/ppc-pci.h> - -#include "pci.h" - -#define MAX_CELLEB_PCI_BUS 4 - -void *celleb_dummy_page_va; - -static struct celleb_pci_bus { - struct pci_controller *phb; - void (*dummy_read)(struct pci_controller *); -} celleb_pci_busses[MAX_CELLEB_PCI_BUS]; - -static int celleb_pci_count = 0; - -static struct celleb_pci_bus *celleb_pci_find(unsigned long vaddr, - unsigned long paddr) -{ - int i, j; - struct resource *res; - - for (i = 0; i < celleb_pci_count; i++) { - struct celleb_pci_bus *bus = &celleb_pci_busses[i]; - struct pci_controller *phb = bus->phb; - if (paddr) - for (j = 0; j < 3; j++) { - res = &phb->mem_resources[j]; - if (paddr >= res->start && paddr <= res->end) - return bus; - } - res = &phb->io_resource; - if (vaddr && vaddr >= res->start && vaddr <= res->end) - return bus; - } - return NULL; -} - -static void celleb_io_flush(const PCI_IO_ADDR addr) -{ - struct celleb_pci_bus *bus; - int token; - - token = PCI_GET_ADDR_TOKEN(addr); - - if (token && token <= celleb_pci_count) - bus = &celleb_pci_busses[token - 1]; - else { - unsigned long vaddr, paddr; - pte_t *ptep; - - vaddr = (unsigned long)PCI_FIX_ADDR(addr); - if (vaddr < PHB_IO_BASE || vaddr >= PHB_IO_END) - return; - - ptep = find_linux_pte(init_mm.pgd, vaddr); - if (ptep == NULL) - paddr = 0; - else - paddr = pte_pfn(*ptep) << PAGE_SHIFT; - bus = celleb_pci_find(vaddr, paddr); - - if (bus == NULL) - return; - } - - if (bus->dummy_read) - bus->dummy_read(bus->phb); -} - -static u8 celleb_readb(const PCI_IO_ADDR addr) -{ - u8 val; - val = __do_readb(addr); - celleb_io_flush(addr); - return val; -} - -static u16 celleb_readw(const PCI_IO_ADDR addr) -{ - u16 val; - val = __do_readw(addr); - celleb_io_flush(addr); - return val; -} - -static u32 celleb_readl(const PCI_IO_ADDR addr) -{ - u32 val; - val = __do_readl(addr); - celleb_io_flush(addr); - return val; -} - -static u64 celleb_readq(const PCI_IO_ADDR addr) -{ - u64 val; - val = __do_readq(addr); - celleb_io_flush(addr); - return val; -} - -static u16 celleb_readw_be(const PCI_IO_ADDR addr) -{ - u16 val; - val = __do_readw_be(addr); - celleb_io_flush(addr); - return val; -} - -static u32 celleb_readl_be(const PCI_IO_ADDR addr) -{ - u32 val; - val = __do_readl_be(addr); - celleb_io_flush(addr); - return val; -} - -static u64 celleb_readq_be(const PCI_IO_ADDR addr) -{ - u64 val; - val = __do_readq_be(addr); - celleb_io_flush(addr); - return val; -} - -static void celleb_readsb(const PCI_IO_ADDR addr, - void *buf, unsigned long count) -{ - __do_readsb(addr, buf, count); - celleb_io_flush(addr); -} - -static void celleb_readsw(const PCI_IO_ADDR addr, - void *buf, unsigned long count) -{ - __do_readsw(addr, buf, count); - celleb_io_flush(addr); -} - -static void celleb_readsl(const PCI_IO_ADDR addr, - void *buf, unsigned long count) -{ - __do_readsl(addr, buf, count); - celleb_io_flush(addr); -} - -static void celleb_memcpy_fromio(void *dest, - const PCI_IO_ADDR src, - unsigned long n) -{ - __do_memcpy_fromio(dest, src, n); - celleb_io_flush(src); -} - -static void __iomem *celleb_ioremap(unsigned long addr, - unsigned long size, - unsigned long flags) -{ - struct celleb_pci_bus *bus; - void __iomem *res = __ioremap(addr, size, flags); - int busno; - - bus = celleb_pci_find(0, addr); - if (bus != NULL) { - busno = bus - celleb_pci_busses; - PCI_SET_ADDR_TOKEN(res, busno + 1); - } - return res; -} - -static void celleb_iounmap(volatile void __iomem *addr) -{ - return __iounmap(PCI_FIX_ADDR(addr)); -} - -static struct ppc_pci_io celleb_pci_io __initdata = { - .readb = celleb_readb, - .readw = celleb_readw, - .readl = celleb_readl, - .readq = celleb_readq, - .readw_be = celleb_readw_be, - .readl_be = celleb_readl_be, - .readq_be = celleb_readq_be, - .readsb = celleb_readsb, - .readsw = celleb_readsw, - .readsl = celleb_readsl, - .memcpy_fromio = celleb_memcpy_fromio, -}; - -void __init celleb_pci_add_one(struct pci_controller *phb, - void (*dummy_read)(struct pci_controller *)) -{ - struct celleb_pci_bus *bus = &celleb_pci_busses[celleb_pci_count]; - struct device_node *np = phb->dn; - - if (celleb_pci_count >= MAX_CELLEB_PCI_BUS) { - printk(KERN_ERR "Too many pci bridges, workarounds" - " disabled for %s\n", np->full_name); - return; - } - - celleb_pci_count++; - - bus->phb = phb; - bus->dummy_read = dummy_read; -} - -static struct of_device_id celleb_pci_workaround_match[] __initdata = { - { - .name = "pci-pseudo", - .data = fake_pci_workaround_init, - }, { - .name = "epci", - .data = epci_workaround_init, - }, { - }, -}; - -int __init celleb_pci_workaround_init(void) -{ - struct pci_controller *phb; - struct device_node *node; - const struct of_device_id *match; - void (*init_func)(struct pci_controller *); - - celleb_dummy_page_va = kmalloc(PAGE_SIZE, GFP_KERNEL); - if (!celleb_dummy_page_va) { - printk(KERN_ERR "Celleb: dummy read disabled. " - "Alloc celleb_dummy_page_va failed\n"); - return 1; - } - - list_for_each_entry(phb, &hose_list, list_node) { - node = phb->dn; - match = of_match_node(celleb_pci_workaround_match, node); - - if (match) { - init_func = match->data; - (*init_func)(phb); - } - } - - ppc_pci_io = celleb_pci_io; - ppc_md.ioremap = celleb_ioremap; - ppc_md.iounmap = celleb_iounmap; - - return 0; -} diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c index d4f8bf581e3a..84e2d78b9a62 100644 --- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c +++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c @@ -117,11 +117,11 @@ static void __init mpc7448_hpc2_init_IRQ(void) } if (mpic_paddr == 0) { - printk("%s: No tsi108 PIC found !\n", __FUNCTION__); + printk("%s: No tsi108 PIC found !\n", __func__); return; } - DBG("%s: tsi108 pic phys_addr = 0x%x\n", __FUNCTION__, + DBG("%s: tsi108 pic phys_addr = 0x%x\n", __func__, (u32) mpic_paddr); mpic = mpic_alloc(tsi_pic, mpic_paddr, @@ -140,17 +140,17 @@ static void __init mpc7448_hpc2_init_IRQ(void) #ifdef CONFIG_PCI tsi_pci = of_find_node_by_type(NULL, "pci"); if (tsi_pci == NULL) { - printk("%s: No tsi108 pci node found !\n", __FUNCTION__); + printk("%s: No tsi108 pci node found !\n", __func__); return; } cascade_node = of_find_node_by_type(NULL, "pic-router"); if (cascade_node == NULL) { - printk("%s: No tsi108 pci cascade node found !\n", __FUNCTION__); + printk("%s: No tsi108 pci cascade node found !\n", __func__); return; } cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0); - DBG("%s: tsi108 cascade_pci_irq = 0x%x\n", __FUNCTION__, + DBG("%s: tsi108 cascade_pci_irq = 0x%x\n", __func__, (u32) cascade_pci_irq); tsi108_pci_int_init(cascade_node); set_irq_data(cascade_pci_irq, mpic); diff --git a/arch/powerpc/platforms/embedded6xx/prpmc2800.c b/arch/powerpc/platforms/embedded6xx/prpmc2800.c index 653a5eb91c90..5a19b9a1457c 100644 --- a/arch/powerpc/platforms/embedded6xx/prpmc2800.c +++ b/arch/powerpc/platforms/embedded6xx/prpmc2800.c @@ -49,13 +49,13 @@ static void __init prpmc2800_setup_arch(void) * ioremap mpp and gpp registers in case they are later * needed by prpmc2800_reset_board(). */ - np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-mpp"); + np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-mpp"); reg = of_get_property(np, "reg", NULL); paddr = of_translate_address(np, reg); of_node_put(np); mv64x60_mpp_reg_base = ioremap(paddr, reg[1]); - np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-gpp"); + np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-gpp"); reg = of_get_property(np, "reg", NULL); paddr = of_translate_address(np, reg); of_node_put(np); diff --git a/arch/powerpc/platforms/iseries/exception.S b/arch/powerpc/platforms/iseries/exception.S index 5381038f0881..8ff330d026ca 100644 --- a/arch/powerpc/platforms/iseries/exception.S +++ b/arch/powerpc/platforms/iseries/exception.S @@ -38,11 +38,19 @@ .globl system_reset_iSeries system_reset_iSeries: - mfspr r13,SPRN_SPRG3 /* Get paca address */ + mfspr r13,SPRN_SPRG3 /* Get alpaca address */ + LOAD_REG_IMMEDIATE(r23, alpaca) + li r0,ALPACA_SIZE + sub r23,r13,r23 + divdu r23,r23,r0 /* r23 has cpu number */ + LOAD_REG_IMMEDIATE(r13, paca) + mulli r0,r23,PACA_SIZE + add r13,r13,r0 + mtspr SPRN_SPRG3,r13 /* Save it away for the future */ mfmsr r24 ori r24,r24,MSR_RI mtmsrd r24 /* RI on */ - lhz r24,PACAPACAINDEX(r13) /* Get processor # */ + mr r24,r23 cmpwi 0,r24,0 /* Are we processor 0? */ bne 1f b .__start_initialization_iSeries /* Start up the first processor */ @@ -51,8 +59,33 @@ system_reset_iSeries: andc r4,r4,r5 mtspr SPRN_CTRLT,r4 +/* Spin on __secondary_hold_spinloop until it is updated by the boot cpu. */ +/* In the UP case we'll yeild() later, and we will not access the paca anyway */ +#ifdef CONFIG_SMP 1: HMT_LOW + LOAD_REG_IMMEDIATE(r23, __secondary_hold_spinloop) + ld r23,0(r23) + sync + LOAD_REG_IMMEDIATE(r3,current_set) + sldi r28,r24,3 /* get current_set[cpu#] */ + ldx r3,r3,r28 + addi r1,r3,THREAD_SIZE + subi r1,r1,STACK_FRAME_OVERHEAD + + cmpwi 0,r23,0 /* Keep poking the Hypervisor until */ + bne 2f /* we're released */ + /* Let the Hypervisor know we are alive */ + /* 8002 is a call to HvCallCfg::getLps, a harmless Hypervisor function */ + lis r3,0x8002 + rldicr r3,r3,32,15 /* r0 = (r3 << 32) & 0xffff000000000000 */ + li r0,-1 /* r0=-1 indicates a Hypervisor call */ + sc /* Invoke the hypervisor via a system call */ + b 1b +#endif + +2: + HMT_LOW #ifdef CONFIG_SMP lbz r23,PACAPROCSTART(r13) /* Test if this processor * should start */ @@ -83,7 +116,7 @@ iSeries_secondary_smp_loop: li r0,-1 /* r0=-1 indicates a Hypervisor call */ sc /* Invoke the hypervisor via a system call */ mfspr r13,SPRN_SPRG3 /* Put r13 back ???? */ - b 1b /* If SMP not configured, secondaries + b 2b /* If SMP not configured, secondaries * loop forever */ /*** ISeries-LPAR interrupt handlers ***/ diff --git a/arch/powerpc/platforms/iseries/ipl_parms.h b/arch/powerpc/platforms/iseries/ipl_parms.h index 77c135ddbf1b..83e4ca42fc57 100644 --- a/arch/powerpc/platforms/iseries/ipl_parms.h +++ b/arch/powerpc/platforms/iseries/ipl_parms.h @@ -65,6 +65,4 @@ struct ItIplParmsReal { u64 xRsvd13; // Reserved x38-x3F }; -extern struct ItIplParmsReal xItIplParmsReal; - #endif /* _ISERIES_IPL_PARMS_H */ diff --git a/arch/powerpc/platforms/iseries/lpardata.c b/arch/powerpc/platforms/iseries/lpardata.c index 8162049bb04d..98bd2d37038a 100644 --- a/arch/powerpc/platforms/iseries/lpardata.c +++ b/arch/powerpc/platforms/iseries/lpardata.c @@ -14,10 +14,10 @@ #include <asm/ptrace.h> #include <asm/abs_addr.h> #include <asm/lppaca.h> -#include <asm/iseries/it_lp_reg_save.h> #include <asm/paca.h> #include <asm/iseries/lpar_map.h> #include <asm/iseries/it_lp_queue.h> +#include <asm/iseries/alpaca.h> #include "naca.h" #include "vpd_areas.h" @@ -31,7 +31,7 @@ /* The HvReleaseData is the root of the information shared between * the hypervisor and Linux. */ -struct HvReleaseData hvReleaseData = { +const struct HvReleaseData hvReleaseData = { .xDesc = 0xc8a5d9c4, /* "HvRD" ebcdic */ .xSize = sizeof(struct HvReleaseData), .xVpdAreasPtrOffset = offsetof(struct naca_struct, xItVpdAreas), @@ -61,6 +61,63 @@ struct naca_struct naca = { .xRamDiskSize = 0, }; +struct ItLpRegSave { + u32 xDesc; // Eye catcher "LpRS" ebcdic 000-003 + u16 xSize; // Size of this class 004-005 + u8 xInUse; // Area is live 006-007 + u8 xRsvd1[9]; // Reserved 007-00F + + u8 xFixedRegSave[352]; // Fixed Register Save Area 010-16F + u32 xCTRL; // Control Register 170-173 + u32 xDEC; // Decrementer 174-177 + u32 xFPSCR; // FP Status and Control Reg 178-17B + u32 xPVR; // Processor Version Number 17C-17F + + u64 xMMCR0; // Monitor Mode Control Reg 0 180-187 + u32 xPMC1; // Perf Monitor Counter 1 188-18B + u32 xPMC2; // Perf Monitor Counter 2 18C-18F + u32 xPMC3; // Perf Monitor Counter 3 190-193 + u32 xPMC4; // Perf Monitor Counter 4 194-197 + u32 xPIR; // Processor ID Reg 198-19B + + u32 xMMCR1; // Monitor Mode Control Reg 1 19C-19F + u32 xMMCRA; // Monitor Mode Control Reg A 1A0-1A3 + u32 xPMC5; // Perf Monitor Counter 5 1A4-1A7 + u32 xPMC6; // Perf Monitor Counter 6 1A8-1AB + u32 xPMC7; // Perf Monitor Counter 7 1AC-1AF + u32 xPMC8; // Perf Monitor Counter 8 1B0-1B3 + u32 xTSC; // Thread Switch Control 1B4-1B7 + u32 xTST; // Thread Switch Timeout 1B8-1BB + u32 xRsvd; // Reserved 1BC-1BF + + u64 xACCR; // Address Compare Control Reg 1C0-1C7 + u64 xIMR; // Instruction Match Register 1C8-1CF + u64 xSDR1; // Storage Description Reg 1 1D0-1D7 + u64 xSPRG0; // Special Purpose Reg General0 1D8-1DF + u64 xSPRG1; // Special Purpose Reg General1 1E0-1E7 + u64 xSPRG2; // Special Purpose Reg General2 1E8-1EF + u64 xSPRG3; // Special Purpose Reg General3 1F0-1F7 + u64 xTB; // Time Base Register 1F8-1FF + + u64 xFPR[32]; // Floating Point Registers 200-2FF + + u64 xMSR; // Machine State Register 300-307 + u64 xNIA; // Next Instruction Address 308-30F + + u64 xDABR; // Data Address Breakpoint Reg 310-317 + u64 xIABR; // Inst Address Breakpoint Reg 318-31F + + u64 xHID0; // HW Implementation Dependent0 320-327 + + u64 xHID4; // HW Implementation Dependent4 328-32F + u64 xSCOMd; // SCON Data Reg (SPRG4) 330-337 + u64 xSCOMc; // SCON Command Reg (SPRG5) 338-33F + u64 xSDAR; // Sample Data Address Register 340-347 + u64 xSIAR; // Sample Inst Address Register 348-34F + + u8 xRsvd3[176]; // Reserved 350-3FF +}; + extern void system_reset_iSeries(void); extern void machine_check_iSeries(void); extern void data_access_iSeries(void); @@ -129,7 +186,7 @@ struct ItLpNaca itLpNaca = { }; /* May be filled in by the hypervisor so cannot end up in the BSS */ -struct ItIplParmsReal xItIplParmsReal __attribute__((__section__(".data"))); +static struct ItIplParmsReal xItIplParmsReal __attribute__((__section__(".data"))); /* May be filled in by the hypervisor so cannot end up in the BSS */ struct ItExtVpdPanel xItExtVpdPanel __attribute__((__section__(".data"))); @@ -152,13 +209,54 @@ u64 xMsVpd[3400] __attribute__((__section__(".data"))); /* Space for Recovery Log Buffer */ /* May be filled in by the hypervisor so cannot end up in the BSS */ -u64 xRecoveryLogBuffer[32] __attribute__((__section__(".data"))); +static u64 xRecoveryLogBuffer[32] __attribute__((__section__(".data"))); -struct SpCommArea xSpCommArea = { +static const struct SpCommArea xSpCommArea = { .xDesc = 0xE2D7C3C2, .xFormat = 1, }; +static const struct ItLpRegSave iseries_reg_save[] = { + [0 ... (NR_CPUS-1)] = { + .xDesc = 0xd397d9e2, /* "LpRS" */ + .xSize = sizeof(struct ItLpRegSave), + }, +}; + +#define ALPACA_INIT(number) \ +{ \ + .lppaca_ptr = &lppaca[number], \ + .reg_save_ptr = &iseries_reg_save[number], \ +} + +const struct alpaca alpaca[] = { + ALPACA_INIT( 0), +#if NR_CPUS > 1 + ALPACA_INIT( 1), ALPACA_INIT( 2), ALPACA_INIT( 3), +#if NR_CPUS > 4 + ALPACA_INIT( 4), ALPACA_INIT( 5), ALPACA_INIT( 6), ALPACA_INIT( 7), +#if NR_CPUS > 8 + ALPACA_INIT( 8), ALPACA_INIT( 9), ALPACA_INIT(10), ALPACA_INIT(11), + ALPACA_INIT(12), ALPACA_INIT(13), ALPACA_INIT(14), ALPACA_INIT(15), + ALPACA_INIT(16), ALPACA_INIT(17), ALPACA_INIT(18), ALPACA_INIT(19), + ALPACA_INIT(20), ALPACA_INIT(21), ALPACA_INIT(22), ALPACA_INIT(23), + ALPACA_INIT(24), ALPACA_INIT(25), ALPACA_INIT(26), ALPACA_INIT(27), + ALPACA_INIT(28), ALPACA_INIT(29), ALPACA_INIT(30), ALPACA_INIT(31), +#if NR_CPUS > 32 + ALPACA_INIT(32), ALPACA_INIT(33), ALPACA_INIT(34), ALPACA_INIT(35), + ALPACA_INIT(36), ALPACA_INIT(37), ALPACA_INIT(38), ALPACA_INIT(39), + ALPACA_INIT(40), ALPACA_INIT(41), ALPACA_INIT(42), ALPACA_INIT(43), + ALPACA_INIT(44), ALPACA_INIT(45), ALPACA_INIT(46), ALPACA_INIT(47), + ALPACA_INIT(48), ALPACA_INIT(49), ALPACA_INIT(50), ALPACA_INIT(51), + ALPACA_INIT(52), ALPACA_INIT(53), ALPACA_INIT(54), ALPACA_INIT(55), + ALPACA_INIT(56), ALPACA_INIT(57), ALPACA_INIT(58), ALPACA_INIT(59), + ALPACA_INIT(60), ALPACA_INIT(61), ALPACA_INIT(62), ALPACA_INIT(63), +#endif +#endif +#endif +#endif +}; + /* The LparMap data is now located at offset 0x6000 in head.S * It was put there so that the HvReleaseData could address it * with a 32-bit offset as required by the iSeries hypervisor @@ -167,7 +265,7 @@ struct SpCommArea xSpCommArea = { * the Naca via the HvReleaseData area. The HvReleaseData has the * offset into the Naca of the pointer to the ItVpdAreas. */ -struct ItVpdAreas itVpdAreas = { +const struct ItVpdAreas itVpdAreas = { .xSlicDesc = 0xc9a3e5c1, /* "ItVA" */ .xSlicSize = sizeof(struct ItVpdAreas), .xSlicVpdEntries = ItVpdMaxEntries, /* # VPD array entries */ @@ -185,7 +283,7 @@ struct ItVpdAreas itVpdAreas = { .xSlicVpdLens = { /* VPD lengths */ 0,0,0, /* 0 - 2 */ sizeof(xItExtVpdPanel), /* 3 Extended VPD */ - sizeof(struct paca_struct), /* 4 length of Paca */ + sizeof(struct alpaca), /* 4 length of (fake) Paca */ 0, /* 5 */ sizeof(struct ItIplParmsReal),/* 6 length of IPL parms */ 26992, /* 7 length of MS VPD */ @@ -203,7 +301,7 @@ struct ItVpdAreas itVpdAreas = { .xSlicVpdAdrs = { /* VPD addresses */ 0,0,0, /* 0 - 2 */ &xItExtVpdPanel, /* 3 Extended VPD */ - &paca[0], /* 4 first Paca */ + &alpaca[0], /* 4 first (fake) Paca */ 0, /* 5 */ &xItIplParmsReal, /* 6 IPL parms */ &xMsVpd, /* 7 MS Vpd */ @@ -219,10 +317,3 @@ struct ItVpdAreas itVpdAreas = { 0,0 } }; - -struct ItLpRegSave iseries_reg_save[] = { - [0 ... (NR_CPUS-1)] = { - .xDesc = 0xd397d9e2, /* "LpRS" */ - .xSize = sizeof(struct ItLpRegSave), - }, -}; diff --git a/arch/powerpc/platforms/iseries/naca.h b/arch/powerpc/platforms/iseries/naca.h index ab2372eb8d2e..f01708e12862 100644 --- a/arch/powerpc/platforms/iseries/naca.h +++ b/arch/powerpc/platforms/iseries/naca.h @@ -14,7 +14,7 @@ struct naca_struct { /* Kernel only data - undefined for user space */ - void *xItVpdAreas; /* VPD Data 0x00 */ + const void *xItVpdAreas; /* VPD Data 0x00 */ void *xRamDisk; /* iSeries ramdisk 0x08 */ u64 xRamDiskSize; /* In pages 0x10 */ }; diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c index cc562e4c2f32..02a634faedbe 100644 --- a/arch/powerpc/platforms/iseries/pci.c +++ b/arch/powerpc/platforms/iseries/pci.c @@ -23,6 +23,7 @@ #undef DEBUG +#include <linux/jiffies.h> #include <linux/kernel.h> #include <linux/list.h> #include <linux/string.h> @@ -586,7 +587,7 @@ static inline struct device_node *xlate_iomm_address( static unsigned long last_jiffies; static int num_printed; - if ((jiffies - last_jiffies) > 60 * HZ) { + if (time_after(jiffies, last_jiffies + 60 * HZ)) { last_jiffies = jiffies; num_printed = 0; } diff --git a/arch/powerpc/platforms/iseries/release_data.h b/arch/powerpc/platforms/iseries/release_data.h index 66189fd2e32d..6ad7d843e8fc 100644 --- a/arch/powerpc/platforms/iseries/release_data.h +++ b/arch/powerpc/platforms/iseries/release_data.h @@ -58,6 +58,6 @@ struct HvReleaseData { char xRsvd3[20]; /* Reserved x2C-x3F */ }; -extern struct HvReleaseData hvReleaseData; +extern const struct HvReleaseData hvReleaseData; #endif /* _ISERIES_RELEASE_DATA_H */ diff --git a/arch/powerpc/platforms/iseries/spcomm_area.h b/arch/powerpc/platforms/iseries/spcomm_area.h index 6e3b685115c9..598b7c14573a 100644 --- a/arch/powerpc/platforms/iseries/spcomm_area.h +++ b/arch/powerpc/platforms/iseries/spcomm_area.h @@ -31,6 +31,4 @@ struct SpCommArea { u8 xRsvd2[80]; // Reserved 030-07F }; -extern struct SpCommArea xSpCommArea; - #endif /* _ISERIES_SPCOMM_AREA_H */ diff --git a/arch/powerpc/platforms/iseries/vpd_areas.h b/arch/powerpc/platforms/iseries/vpd_areas.h index 601e6dd860ed..feb001f3a5fe 100644 --- a/arch/powerpc/platforms/iseries/vpd_areas.h +++ b/arch/powerpc/platforms/iseries/vpd_areas.h @@ -80,9 +80,9 @@ struct ItVpdAreas { u32 xPlicDmaLens[ItDmaMaxEntries];// Array of DMA lengths 080-0A7 u32 xPlicDmaToks[ItDmaMaxEntries];// Array of DMA tokens 0A8-0CF u32 xSlicVpdLens[ItVpdMaxEntries];// Array of VPD lengths 0D0-12F - void *xSlicVpdAdrs[ItVpdMaxEntries];// Array of VPD buffers 130-1EF + const void *xSlicVpdAdrs[ItVpdMaxEntries];// Array of VPD buffers 130-1EF }; -extern struct ItVpdAreas itVpdAreas; +extern const struct ItVpdAreas itVpdAreas; #endif /* _ISERIES_VPD_AREAS_H */ diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c index 3ffa0ac170ee..301855263b81 100644 --- a/arch/powerpc/platforms/maple/pci.c +++ b/arch/powerpc/platforms/maple/pci.c @@ -592,50 +592,3 @@ int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel) } return irq; } - -/* XXX: To remove once all firmwares are ok */ -static void fixup_maple_ide(struct pci_dev* dev) -{ - if (!machine_is(maple)) - return; - -#if 0 /* Enable this to enable IDE port 0 */ - { - u8 v; - - pci_read_config_byte(dev, 0x40, &v); - v |= 2; - pci_write_config_byte(dev, 0x40, v); - } -#endif -#if 0 /* fix bus master base */ - pci_write_config_dword(dev, 0x20, 0xcc01); - printk("old ide resource: %lx -> %lx \n", - dev->resource[4].start, dev->resource[4].end); - dev->resource[4].start = 0xcc00; - dev->resource[4].end = 0xcc10; -#endif -#if 0 /* Enable this to fixup IDE sense/polarity of irqs in IO-APICs */ - { - struct pci_dev *apicdev; - u32 v; - - apicdev = pci_get_slot (dev->bus, PCI_DEVFN(5,0)); - if (apicdev == NULL) - printk("IDE Fixup IRQ: Can't find IO-APIC !\n"); - else { - pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*14); - pci_read_config_dword(apicdev, 0xf4, &v); - v &= ~0x00000022; - pci_write_config_dword(apicdev, 0xf4, v); - pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*15); - pci_read_config_dword(apicdev, 0xf4, &v); - v &= ~0x00000022; - pci_write_config_dword(apicdev, 0xf4, v); - pci_dev_put(apicdev); - } - } -#endif -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_IDE, - fixup_maple_ide); diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c index 3ce2d73b4177..364714757cf1 100644 --- a/arch/powerpc/platforms/maple/setup.c +++ b/arch/powerpc/platforms/maple/setup.c @@ -43,6 +43,7 @@ #include <linux/smp.h> #include <linux/bitops.h> #include <linux/of_device.h> +#include <linux/lmb.h> #include <asm/processor.h> #include <asm/sections.h> @@ -57,7 +58,6 @@ #include <asm/dma.h> #include <asm/cputable.h> #include <asm/time.h> -#include <asm/lmb.h> #include <asm/mpic.h> #include <asm/rtas.h> #include <asm/udbg.h> @@ -319,7 +319,7 @@ static int __init maple_probe(void) return 1; } -define_machine(maple_md) { +define_machine(maple) { .name = "Maple", .probe = maple_probe, .setup_arch = maple_setup_arch, diff --git a/arch/powerpc/platforms/pasemi/dma_lib.c b/arch/powerpc/platforms/pasemi/dma_lib.c index c529d8dff395..217af321b0ca 100644 --- a/arch/powerpc/platforms/pasemi/dma_lib.c +++ b/arch/powerpc/platforms/pasemi/dma_lib.c @@ -17,6 +17,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <linux/kernel.h> #include <linux/init.h> #include <linux/module.h> #include <linux/pci.h> @@ -26,6 +27,8 @@ #define MAX_TXCH 64 #define MAX_RXCH 64 +#define MAX_FLAGS 64 +#define MAX_FUN 8 static struct pasdma_status *dma_status; @@ -43,6 +46,8 @@ static struct pci_dev *dma_pdev; static DECLARE_BITMAP(txch_free, MAX_TXCH); static DECLARE_BITMAP(rxch_free, MAX_RXCH); +static DECLARE_BITMAP(flags_free, MAX_FLAGS); +static DECLARE_BITMAP(fun_free, MAX_FUN); /* pasemi_read_iob_reg - read IOB register * @reg: Register to read (offset into PCI CFG space) @@ -373,6 +378,106 @@ void pasemi_dma_free_buf(struct pasemi_dmachan *chan, int size, } EXPORT_SYMBOL(pasemi_dma_free_buf); +/* pasemi_dma_alloc_flag - Allocate a flag (event) for channel syncronization + * + * Allocates a flag for use with channel syncronization (event descriptors). + * Returns allocated flag (0-63), < 0 on error. + */ +int pasemi_dma_alloc_flag(void) +{ + int bit; + +retry: + bit = find_next_bit(flags_free, MAX_FLAGS, 0); + if (bit >= MAX_FLAGS) + return -ENOSPC; + if (!test_and_clear_bit(bit, flags_free)) + goto retry; + + return bit; +} +EXPORT_SYMBOL(pasemi_dma_alloc_flag); + + +/* pasemi_dma_free_flag - Deallocates a flag (event) + * @flag: Flag number to deallocate + * + * Frees up a flag so it can be reused for other purposes. + */ +void pasemi_dma_free_flag(int flag) +{ + BUG_ON(test_bit(flag, flags_free)); + BUG_ON(flag >= MAX_FLAGS); + set_bit(flag, flags_free); +} +EXPORT_SYMBOL(pasemi_dma_free_flag); + + +/* pasemi_dma_set_flag - Sets a flag (event) to 1 + * @flag: Flag number to set active + * + * Sets the flag provided to 1. + */ +void pasemi_dma_set_flag(int flag) +{ + BUG_ON(flag >= MAX_FLAGS); + if (flag < 32) + pasemi_write_dma_reg(PAS_DMA_TXF_SFLG0, 1 << flag); + else + pasemi_write_dma_reg(PAS_DMA_TXF_SFLG1, 1 << flag); +} +EXPORT_SYMBOL(pasemi_dma_set_flag); + +/* pasemi_dma_clear_flag - Sets a flag (event) to 0 + * @flag: Flag number to set inactive + * + * Sets the flag provided to 0. + */ +void pasemi_dma_clear_flag(int flag) +{ + BUG_ON(flag >= MAX_FLAGS); + if (flag < 32) + pasemi_write_dma_reg(PAS_DMA_TXF_CFLG0, 1 << flag); + else + pasemi_write_dma_reg(PAS_DMA_TXF_CFLG1, 1 << flag); +} +EXPORT_SYMBOL(pasemi_dma_clear_flag); + +/* pasemi_dma_alloc_fun - Allocate a function engine + * + * Allocates a function engine to use for crypto/checksum offload + * Returns allocated engine (0-8), < 0 on error. + */ +int pasemi_dma_alloc_fun(void) +{ + int bit; + +retry: + bit = find_next_bit(fun_free, MAX_FLAGS, 0); + if (bit >= MAX_FLAGS) + return -ENOSPC; + if (!test_and_clear_bit(bit, fun_free)) + goto retry; + + return bit; +} +EXPORT_SYMBOL(pasemi_dma_alloc_fun); + + +/* pasemi_dma_free_fun - Deallocates a function engine + * @flag: Engine number to deallocate + * + * Frees up a function engine so it can be used for other purposes. + */ +void pasemi_dma_free_fun(int fun) +{ + BUG_ON(test_bit(fun, fun_free)); + BUG_ON(fun >= MAX_FLAGS); + set_bit(fun, fun_free); +} +EXPORT_SYMBOL(pasemi_dma_free_fun); + + static void *map_onedev(struct pci_dev *p, int index) { struct device_node *dn; @@ -410,6 +515,7 @@ int pasemi_dma_init(void) struct resource res; struct device_node *dn; int i, intf, err = 0; + unsigned long timeout; u32 tmp; if (!machine_is(pasemi)) @@ -478,6 +584,44 @@ int pasemi_dma_init(void) for (i = 0; i < MAX_RXCH; i++) __set_bit(i, rxch_free); + timeout = jiffies + HZ; + pasemi_write_dma_reg(PAS_DMA_COM_RXCMD, 0); + while (pasemi_read_dma_reg(PAS_DMA_COM_RXSTA) & 1) { + if (time_after(jiffies, timeout)) { + pr_warning("Warning: Could not disable RX section\n"); + break; + } + } + + timeout = jiffies + HZ; + pasemi_write_dma_reg(PAS_DMA_COM_TXCMD, 0); + while (pasemi_read_dma_reg(PAS_DMA_COM_TXSTA) & 1) { + if (time_after(jiffies, timeout)) { + pr_warning("Warning: Could not disable TX section\n"); + break; + } + } + + /* setup resource allocations for the different DMA sections */ + tmp = pasemi_read_dma_reg(PAS_DMA_COM_CFG); + pasemi_write_dma_reg(PAS_DMA_COM_CFG, tmp | 0x18000000); + + /* enable tx section */ + pasemi_write_dma_reg(PAS_DMA_COM_TXCMD, PAS_DMA_COM_TXCMD_EN); + + /* enable rx section */ + pasemi_write_dma_reg(PAS_DMA_COM_RXCMD, PAS_DMA_COM_RXCMD_EN); + + for (i = 0; i < MAX_FLAGS; i++) + __set_bit(i, flags_free); + + for (i = 0; i < MAX_FUN; i++) + __set_bit(i, fun_free); + + /* clear all status flags */ + pasemi_write_dma_reg(PAS_DMA_TXF_CFLG0, 0xffffffff); + pasemi_write_dma_reg(PAS_DMA_TXF_CFLG1, 0xffffffff); + printk(KERN_INFO "PA Semi PWRficient DMA library initialized " "(%d tx, %d rx channels)\n", num_txch, num_rxch); diff --git a/arch/powerpc/platforms/pasemi/gpio_mdio.c b/arch/powerpc/platforms/pasemi/gpio_mdio.c index b46542990cf8..ab6955412ba4 100644 --- a/arch/powerpc/platforms/pasemi/gpio_mdio.c +++ b/arch/powerpc/platforms/pasemi/gpio_mdio.c @@ -241,7 +241,7 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev, new_bus->reset = &gpio_mdio_reset; prop = of_get_property(np, "reg", NULL); - new_bus->id = *prop; + snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", *prop); new_bus->priv = priv; new_bus->phy_mask = 0; diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c index 5803f11c77fc..86967bdd8774 100644 --- a/arch/powerpc/platforms/pasemi/iommu.c +++ b/arch/powerpc/platforms/pasemi/iommu.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2005-2007, PA Semi, Inc + * Copyright (C) 2005-2008, PA Semi, Inc * * Maintained by: Olof Johansson <olof@lixom.net> * @@ -27,7 +27,6 @@ #include <asm/abs_addr.h> #include <asm/firmware.h> - #define IOBMAP_PAGE_SHIFT 12 #define IOBMAP_PAGE_SIZE (1 << IOBMAP_PAGE_SHIFT) #define IOBMAP_PAGE_MASK (IOBMAP_PAGE_SIZE - 1) @@ -35,13 +34,13 @@ #define IOB_BASE 0xe0000000 #define IOB_SIZE 0x3000 /* Configuration registers */ -#define IOBCAP_REG 0x10 -#define IOBCOM_REG 0x40 +#define IOBCAP_REG 0x40 +#define IOBCOM_REG 0x100 /* Enable IOB address translation */ #define IOBCOM_ATEN 0x00000100 /* Address decode configuration register */ -#define IOB_AD_REG 0x53 +#define IOB_AD_REG 0x14c /* IOBCOM_AD_REG fields */ #define IOB_AD_VGPRT 0x00000e00 #define IOB_AD_VGAEN 0x00000100 @@ -56,13 +55,13 @@ #define IOB_AD_TRNG_2G 0x00000001 #define IOB_AD_TRNG_128G 0x00000003 -#define IOB_TABLEBASE_REG 0x55 +#define IOB_TABLEBASE_REG 0x154 /* Base of the 64 4-byte L1 registers */ -#define IOB_XLT_L1_REGBASE 0xac0 +#define IOB_XLT_L1_REGBASE 0x2b00 /* Register to invalidate TLB entries */ -#define IOB_AT_INVAL_TLB_REG 0xb40 +#define IOB_AT_INVAL_TLB_REG 0x2d00 /* The top two bits of the level 1 entry contains valid and type flags */ #define IOBMAP_L1E_V 0x40000000 @@ -76,7 +75,7 @@ #define IOBMAP_L2E_V 0x80000000 #define IOBMAP_L2E_V_CACHED 0xc0000000 -static u32 __iomem *iob; +static void __iomem *iob; static u32 iob_l1_emptyval; static u32 iob_l2_emptyval; static u32 *iob_l2_base; @@ -219,7 +218,7 @@ int __init iob_init(struct device_node *dn) for (i = 0; i < 64; i++) { /* Each L1 covers 32MB, i.e. 8K entries = 32K of ram */ regword = IOBMAP_L1E_V | (__pa(iob_l2_base + i*0x2000) >> 12); - out_le32(iob+IOB_XLT_L1_REGBASE+i, regword); + out_le32(iob+IOB_XLT_L1_REGBASE+i*4, regword); } /* set 2GB translation window, based at 0 */ diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index 1c58db9d42cb..bcf50d7056e9 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -1144,28 +1144,6 @@ void __init pmac_pcibios_after_init(void) { struct device_node* nd; -#ifdef CONFIG_BLK_DEV_IDE - struct pci_dev *dev = NULL; - - /* OF fails to initialize IDE controllers on macs - * (and maybe other machines) - * - * Ideally, this should be moved to the IDE layer, but we need - * to check specifically with Andre Hedrick how to do it cleanly - * since the common IDE code seem to care about the fact that the - * BIOS may have disabled a controller. - * - * -- BenH - */ - for_each_pci_dev(dev) { - if ((dev->class >> 16) != PCI_BASE_CLASS_STORAGE) - continue; - if (pci_enable_device(dev)) - printk(KERN_WARNING - "pci: Failed to enable %s\n", pci_name(dev)); - } -#endif /* CONFIG_BLK_DEV_IDE */ - for_each_node_by_name(nd, "firewire") { if (nd->parent && (of_device_is_compatible(nd, "pci106b,18") || of_device_is_compatible(nd, "pci106b,30") || diff --git a/arch/powerpc/platforms/powermac/pfunc_core.c b/arch/powerpc/platforms/powermac/pfunc_core.c index 85434231ae14..96d5ce50364e 100644 --- a/arch/powerpc/platforms/powermac/pfunc_core.c +++ b/arch/powerpc/platforms/powermac/pfunc_core.c @@ -12,7 +12,6 @@ #include <linux/module.h> #include <linux/mutex.h> -#include <asm/semaphore.h> #include <asm/prom.h> #include <asm/pmac_pfunc.h> diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index 40736400ef80..829b8b02527b 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -618,9 +618,9 @@ static int pmacpic_find_viaint(void) if (np == NULL) goto not_found; viaint = irq_of_parse_and_map(np, 0);; -#endif /* CONFIG_ADB_PMU */ not_found: +#endif /* CONFIG_ADB_PMU */ return viaint; } diff --git a/arch/powerpc/platforms/powermac/pmac.h b/arch/powerpc/platforms/powermac/pmac.h index b3abaaf61eb4..3362e781b6a7 100644 --- a/arch/powerpc/platforms/powermac/pmac.h +++ b/arch/powerpc/platforms/powermac/pmac.h @@ -2,7 +2,6 @@ #define __PMAC_H__ #include <linux/pci.h> -#include <linux/ide.h> #include <linux/irq.h> /* @@ -35,10 +34,6 @@ extern void pmac_check_ht_link(void); extern void pmac_setup_smp(void); -extern unsigned long pmac_ide_get_base(int index); -extern void pmac_ide_init_hwif_ports(hw_regs_t *hw, - unsigned long data_port, unsigned long ctrl_port, int *irq); - extern int pmac_nvram_init(void); extern void pmac_pic_init(void); diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 36ff1b6b7fac..bf44c5441a36 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -53,6 +53,7 @@ #include <linux/suspend.h> #include <linux/of_device.h> #include <linux/of_platform.h> +#include <linux/lmb.h> #include <asm/reg.h> #include <asm/sections.h> @@ -74,7 +75,6 @@ #include <asm/iommu.h> #include <asm/smu.h> #include <asm/pmc.h> -#include <asm/lmb.h> #include <asm/udbg.h> #include "pmac.h" @@ -574,14 +574,6 @@ static int __init pmac_probe(void) ISA_DMA_THRESHOLD = ~0L; DMA_MODE_READ = 1; DMA_MODE_WRITE = 2; - -#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) -#ifdef CONFIG_BLK_DEV_IDE_PMAC - ppc_ide_md.ide_init_hwif = pmac_ide_init_hwif_ports; - ppc_ide_md.default_io_base = pmac_ide_get_base; -#endif /* CONFIG_BLK_DEV_IDE_PMAC */ -#endif /* defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) */ - #endif /* CONFIG_PPC32 */ #ifdef CONFIG_PMAC_SMU diff --git a/arch/powerpc/platforms/ps3/device-init.c b/arch/powerpc/platforms/ps3/device-init.c index 9d251d0ca8c6..3866debfa3c4 100644 --- a/arch/powerpc/platforms/ps3/device-init.c +++ b/arch/powerpc/platforms/ps3/device-init.c @@ -499,41 +499,14 @@ static int __init ps3_register_graphics_devices(void) } /** - * ps3_register_repository_device - Register a device from the repositiory info. - * + * ps3_setup_dynamic_device - Setup a dynamic device from the repository */ -static int ps3_register_repository_device( - const struct ps3_repository_device *repo) +static int ps3_setup_dynamic_device(const struct ps3_repository_device *repo) { int result; switch (repo->dev_type) { - case PS3_DEV_TYPE_SB_GELIC: - result = ps3_setup_gelic_device(repo); - if (result) { - pr_debug("%s:%d ps3_setup_gelic_device failed\n", - __func__, __LINE__); - } - break; - case PS3_DEV_TYPE_SB_USB: - - /* Each USB device has both an EHCI and an OHCI HC */ - - result = ps3_setup_ehci_device(repo); - - if (result) { - pr_debug("%s:%d ps3_setup_ehci_device failed\n", - __func__, __LINE__); - } - - result = ps3_setup_ohci_device(repo); - - if (result) { - pr_debug("%s:%d ps3_setup_ohci_device failed\n", - __func__, __LINE__); - } - break; case PS3_DEV_TYPE_STOR_DISK: result = ps3_setup_storage_dev(repo, PS3_MATCH_ID_STOR_DISK); @@ -572,6 +545,48 @@ static int ps3_register_repository_device( return result; } +/** + * ps3_setup_static_device - Setup a static device from the repository + */ + +static int __init ps3_setup_static_device(const struct ps3_repository_device *repo) +{ + int result; + + switch (repo->dev_type) { + case PS3_DEV_TYPE_SB_GELIC: + result = ps3_setup_gelic_device(repo); + if (result) { + pr_debug("%s:%d ps3_setup_gelic_device failed\n", + __func__, __LINE__); + } + break; + case PS3_DEV_TYPE_SB_USB: + + /* Each USB device has both an EHCI and an OHCI HC */ + + result = ps3_setup_ehci_device(repo); + + if (result) { + pr_debug("%s:%d ps3_setup_ehci_device failed\n", + __func__, __LINE__); + } + + result = ps3_setup_ohci_device(repo); + + if (result) { + pr_debug("%s:%d ps3_setup_ohci_device failed\n", + __func__, __LINE__); + } + break; + + default: + return ps3_setup_dynamic_device(repo); + } + + return result; +} + static void ps3_find_and_add_device(u64 bus_id, u64 dev_id) { struct ps3_repository_device repo; @@ -601,7 +616,7 @@ found: pr_debug("%s:%u: device %lu:%lu found after %u retries\n", __func__, __LINE__, bus_id, dev_id, retries); - ps3_register_repository_device(&repo); + ps3_setup_dynamic_device(&repo); return; } @@ -905,8 +920,7 @@ static int __init ps3_register_devices(void) ps3_register_graphics_devices(); - ps3_repository_find_devices(PS3_BUS_TYPE_SB, - ps3_register_repository_device); + ps3_repository_find_devices(PS3_BUS_TYPE_SB, ps3_setup_static_device); ps3_register_sound_devices(); diff --git a/arch/powerpc/platforms/ps3/htab.c b/arch/powerpc/platforms/ps3/htab.c index 7382f195c4f8..1cf901fa9031 100644 --- a/arch/powerpc/platforms/ps3/htab.c +++ b/arch/powerpc/platforms/ps3/htab.c @@ -19,9 +19,10 @@ */ #include <linux/kernel.h> +#include <linux/lmb.h> #include <asm/machdep.h> -#include <asm/lmb.h> +#include <asm/prom.h> #include <asm/udbg.h> #include <asm/lv1call.h> #include <asm/ps3fb.h> diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c index 3a6db04aa940..a14e5cdc2fed 100644 --- a/arch/powerpc/platforms/ps3/interrupt.c +++ b/arch/powerpc/platforms/ps3/interrupt.c @@ -709,7 +709,7 @@ static unsigned int ps3_get_irq(void) asm volatile("cntlzd %0,%1" : "=r" (plug) : "r" (x)); plug &= 0x3f; - if (unlikely(plug) == NO_IRQ) { + if (unlikely(plug == NO_IRQ)) { pr_debug("%s:%d: no plug found: thread_id %lu\n", __func__, __LINE__, pd->thread_id); dump_bmp(&per_cpu(ps3_private, 0)); diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c index 68900476c842..5b3fb2b321ab 100644 --- a/arch/powerpc/platforms/ps3/mm.c +++ b/arch/powerpc/platforms/ps3/mm.c @@ -21,9 +21,10 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/memory_hotplug.h> +#include <linux/lmb.h> #include <asm/firmware.h> -#include <asm/lmb.h> +#include <asm/prom.h> #include <asm/udbg.h> #include <asm/lv1call.h> diff --git a/arch/powerpc/platforms/ps3/os-area.c b/arch/powerpc/platforms/ps3/os-area.c index b9ea09d9d2fb..1d201782d4e5 100644 --- a/arch/powerpc/platforms/ps3/os-area.c +++ b/arch/powerpc/platforms/ps3/os-area.c @@ -24,8 +24,10 @@ #include <linux/fs.h> #include <linux/syscalls.h> #include <linux/ctype.h> +#include <linux/lmb.h> +#include <linux/of.h> -#include <asm/lmb.h> +#include <asm/prom.h> #include "platform.h" diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c index 5c2cbb08eb52..a413abbd4123 100644 --- a/arch/powerpc/platforms/ps3/setup.c +++ b/arch/powerpc/platforms/ps3/setup.c @@ -95,6 +95,14 @@ static void ps3_power_off(void) ps3_sys_manager_power_off(); /* never returns */ } +static void ps3_halt(void) +{ + DBG("%s:%d\n", __func__, __LINE__); + + smp_send_stop(); + ps3_sys_manager_halt(); /* never returns */ +} + static void ps3_panic(char *str) { DBG("%s:%d %s\n", __func__, __LINE__, str); @@ -105,7 +113,8 @@ static void ps3_panic(char *str) printk(" Please press POWER button.\n"); printk("\n"); - while(1); + while(1) + lv1_pause(1); } #if defined(CONFIG_FB_PS3) || defined(CONFIG_FB_PS3_MODULE) || \ @@ -117,7 +126,7 @@ static void __init prealloc(struct ps3_prealloc *p) p->address = __alloc_bootmem(p->size, p->align, __pa(MAX_DMA_ADDRESS)); if (!p->address) { - printk(KERN_ERR "%s: Cannot allocate %s\n", __FUNCTION__, + printk(KERN_ERR "%s: Cannot allocate %s\n", __func__, p->name); return; } @@ -266,6 +275,7 @@ define_machine(ps3) { .progress = ps3_progress, .restart = ps3_restart, .power_off = ps3_power_off, + .halt = ps3_halt, #if defined(CONFIG_KEXEC) .kexec_cpu_down = ps3_kexec_cpu_down, .machine_kexec = default_machine_kexec, diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c index 5ad41189b494..d135cef9ed6a 100644 --- a/arch/powerpc/platforms/ps3/spu.c +++ b/arch/powerpc/platforms/ps3/spu.c @@ -27,6 +27,7 @@ #include <asm/spu.h> #include <asm/spu_priv1.h> #include <asm/lv1call.h> +#include <asm/ps3.h> #include "../cell/spufs/spufs.h" #include "platform.h" @@ -140,6 +141,12 @@ static void _dump_areas(unsigned int spe_id, unsigned long priv2, pr_debug("%s:%d: shadow: %lxh\n", func, line, shadow); } +inline u64 ps3_get_spe_id(void *arg) +{ + return spu_pdata(arg)->spe_id; +} +EXPORT_SYMBOL_GPL(ps3_get_spe_id); + static unsigned long get_vas_id(void) { unsigned long id; diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index 306a9d07491d..07fe5b69b9e2 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -34,3 +34,8 @@ config LPARCFG help Provide system capacity information via human readable <key word>=<value> pairs through a /proc/ppc64/lparcfg interface. + +config PPC_PSERIES_DEBUG + depends on PPC_PSERIES && PPC_EARLY_DEBUG + bool "Enable extra debug logging in platforms/pseries" + default y diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index 992ba6753cf2..bd2593ed28dd 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -2,6 +2,10 @@ ifeq ($(CONFIG_PPC64),y) EXTRA_CFLAGS += -mno-minimal-toc endif +ifeq ($(CONFIG_PPC_PSERIES_DEBUG),y) +EXTRA_CFLAGS += -DDEBUG +endif + obj-y := lpar.o hvCall.o nvram.o reconfig.o \ setup.o iommu.o ras.o rtasd.o \ firmware.o power.o @@ -18,3 +22,4 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug-cpu.o obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o obj-$(CONFIG_HVCS) += hvcserver.o obj-$(CONFIG_HCALL_STATS) += hvCall_inst.o +obj-$(CONFIG_PHYP_DUMP) += phyp_dump.o diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 9eb539ee5f9a..a3fd56b186e6 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -39,7 +39,6 @@ #include <asm/ppc-pci.h> #include <asm/rtas.h> -#undef DEBUG /** Overview: * EEH, or "Extended Error Handling" is a PCI bridge technology for @@ -945,7 +944,6 @@ static void *early_enable_eeh(struct device_node *dn, void *data) unsigned int rets[3]; struct eeh_early_enable_info *info = data; int ret; - const char *status = of_get_property(dn, "status", NULL); const u32 *class_code = of_get_property(dn, "class-code", NULL); const u32 *vendor_id = of_get_property(dn, "vendor-id", NULL); const u32 *device_id = of_get_property(dn, "device-id", NULL); @@ -959,8 +957,8 @@ static void *early_enable_eeh(struct device_node *dn, void *data) pdn->eeh_freeze_count = 0; pdn->eeh_false_positives = 0; - if (status && strncmp(status, "ok", 2) != 0) - return NULL; /* ignore devices with bad status */ + if (!of_device_is_available(dn)) + return NULL; /* Ignore bad nodes. */ if (!class_code || !vendor_id || !device_id) diff --git a/arch/powerpc/platforms/pseries/eeh_cache.c b/arch/powerpc/platforms/pseries/eeh_cache.c index 1e83fcd0df31..ce37040af870 100644 --- a/arch/powerpc/platforms/pseries/eeh_cache.c +++ b/arch/powerpc/platforms/pseries/eeh_cache.c @@ -28,7 +28,6 @@ #include <asm/pci-bridge.h> #include <asm/ppc-pci.h> -#undef DEBUG /** * The pci address cache subsystem. This subsystem places diff --git a/arch/powerpc/platforms/pseries/firmware.c b/arch/powerpc/platforms/pseries/firmware.c index b765b7c77b65..9d3a40f45974 100644 --- a/arch/powerpc/platforms/pseries/firmware.c +++ b/arch/powerpc/platforms/pseries/firmware.c @@ -21,17 +21,11 @@ * 2 of the License, or (at your option) any later version. */ -#undef DEBUG #include <asm/firmware.h> #include <asm/prom.h> #include <asm/udbg.h> -#ifdef DEBUG -#define DBG(fmt...) udbg_printf(fmt) -#else -#define DBG(fmt...) -#endif typedef struct { unsigned long val; @@ -72,7 +66,7 @@ void __init fw_feature_init(const char *hypertas, unsigned long len) const char *s; int i; - DBG(" -> fw_feature_init()\n"); + pr_debug(" -> fw_feature_init()\n"); for (s = hypertas; s < hypertas + len; s += strlen(s) + 1) { for (i = 0; i < FIRMWARE_MAX_FEATURES; i++) { @@ -88,5 +82,5 @@ void __init fw_feature_init(const char *hypertas, unsigned long len) } } - DBG(" <- fw_feature_init()\n"); + pr_debug(" <- fw_feature_init()\n"); } diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index a65c76308201..176f1f39d2d5 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -47,7 +47,6 @@ #include "plpar_wrappers.h" -#define DBG(fmt...) static void tce_build_pSeries(struct iommu_table *tbl, long index, long npages, unsigned long uaddr, @@ -322,7 +321,7 @@ static void pci_dma_bus_setup_pSeries(struct pci_bus *bus) dn = pci_bus_to_OF_node(bus); - DBG("pci_dma_bus_setup_pSeries: setting up bus %s\n", dn->full_name); + pr_debug("pci_dma_bus_setup_pSeries: setting up bus %s\n", dn->full_name); if (bus->self) { /* This is not a root bus, any setup will be done for the @@ -347,7 +346,7 @@ static void pci_dma_bus_setup_pSeries(struct pci_bus *bus) for (children = 0, tmp = dn->child; tmp; tmp = tmp->sibling) children++; - DBG("Children: %d\n", children); + pr_debug("Children: %d\n", children); /* Calculate amount of DMA window per slot. Each window must be * a power of two (due to pci_alloc_consistent requirements). @@ -361,8 +360,8 @@ static void pci_dma_bus_setup_pSeries(struct pci_bus *bus) while (pci->phb->dma_window_size * children > 0x80000000ul) pci->phb->dma_window_size >>= 1; - DBG("No ISA/IDE, window size is 0x%lx\n", - pci->phb->dma_window_size); + pr_debug("No ISA/IDE, window size is 0x%lx\n", + pci->phb->dma_window_size); pci->phb->dma_window_base_cur = 0; return; @@ -387,8 +386,7 @@ static void pci_dma_bus_setup_pSeries(struct pci_bus *bus) while (pci->phb->dma_window_size * children > 0x70000000ul) pci->phb->dma_window_size >>= 1; - DBG("ISA/IDE, window size is 0x%lx\n", pci->phb->dma_window_size); - + pr_debug("ISA/IDE, window size is 0x%lx\n", pci->phb->dma_window_size); } @@ -401,7 +399,8 @@ static void pci_dma_bus_setup_pSeriesLP(struct pci_bus *bus) dn = pci_bus_to_OF_node(bus); - DBG("pci_dma_bus_setup_pSeriesLP: setting up bus %s\n", dn->full_name); + pr_debug("pci_dma_bus_setup_pSeriesLP: setting up bus %s\n", + dn->full_name); /* Find nearest ibm,dma-window, walking up the device tree */ for (pdn = dn; pdn != NULL; pdn = pdn->parent) { @@ -411,14 +410,14 @@ static void pci_dma_bus_setup_pSeriesLP(struct pci_bus *bus) } if (dma_window == NULL) { - DBG(" no ibm,dma-window property !\n"); + pr_debug(" no ibm,dma-window property !\n"); return; } ppci = PCI_DN(pdn); - DBG(" parent is %s, iommu_table: 0x%p\n", - pdn->full_name, ppci->iommu_table); + pr_debug(" parent is %s, iommu_table: 0x%p\n", + pdn->full_name, ppci->iommu_table); if (!ppci->iommu_table) { tbl = kmalloc_node(sizeof(struct iommu_table), GFP_KERNEL, @@ -426,7 +425,7 @@ static void pci_dma_bus_setup_pSeriesLP(struct pci_bus *bus) iommu_table_setparms_lpar(ppci->phb, pdn, tbl, dma_window, bus->number); ppci->iommu_table = iommu_init_table(tbl, ppci->phb->node); - DBG(" created table: %p\n", ppci->iommu_table); + pr_debug(" created table: %p\n", ppci->iommu_table); } if (pdn != dn) @@ -439,7 +438,7 @@ static void pci_dma_dev_setup_pSeries(struct pci_dev *dev) struct device_node *dn; struct iommu_table *tbl; - DBG("pci_dma_dev_setup_pSeries: %s\n", pci_name(dev)); + pr_debug("pci_dma_dev_setup_pSeries: %s\n", pci_name(dev)); dn = dev->dev.archdata.of_node; @@ -450,7 +449,7 @@ static void pci_dma_dev_setup_pSeries(struct pci_dev *dev) if (!dev->bus->self) { struct pci_controller *phb = PCI_DN(dn)->phb; - DBG(" --> first child, no bridge. Allocating iommu table.\n"); + pr_debug(" --> first child, no bridge. Allocating iommu table.\n"); tbl = kmalloc_node(sizeof(struct iommu_table), GFP_KERNEL, phb->node); iommu_table_setparms(phb, dn, tbl); @@ -480,7 +479,7 @@ static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev) const void *dma_window = NULL; struct pci_dn *pci; - DBG("pci_dma_dev_setup_pSeriesLP: %s\n", pci_name(dev)); + pr_debug("pci_dma_dev_setup_pSeriesLP: %s\n", pci_name(dev)); /* dev setup for LPAR is a little tricky, since the device tree might * contain the dma-window properties per-device and not neccesarily @@ -489,7 +488,7 @@ static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev) * already allocated. */ dn = pci_device_to_OF_node(dev); - DBG(" node is %s\n", dn->full_name); + pr_debug(" node is %s\n", dn->full_name); for (pdn = dn; pdn && PCI_DN(pdn) && !PCI_DN(pdn)->iommu_table; pdn = pdn->parent) { @@ -504,13 +503,13 @@ static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev) pci_name(dev), dn? dn->full_name : "<null>"); return; } - DBG(" parent is %s\n", pdn->full_name); + pr_debug(" parent is %s\n", pdn->full_name); /* Check for parent == NULL so we don't try to setup the empty EADS * slots on POWER4 machines. */ if (dma_window == NULL || pdn->parent == NULL) { - DBG(" no dma window for device, linking to parent\n"); + pr_debug(" no dma window for device, linking to parent\n"); dev->dev.archdata.dma_data = PCI_DN(pdn)->iommu_table; return; } @@ -522,9 +521,9 @@ static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev) iommu_table_setparms_lpar(pci->phb, pdn, tbl, dma_window, pci->phb->bus->number); pci->iommu_table = iommu_init_table(tbl, pci->phb->node); - DBG(" created table: %p\n", pci->iommu_table); + pr_debug(" created table: %p\n", pci->iommu_table); } else { - DBG(" found DMA window, table: %p\n", pci->iommu_table); + pr_debug(" found DMA window, table: %p\n", pci->iommu_table); } dev->dev.archdata.dma_data = pci->iommu_table; diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index 9a455d46379d..2cbaedb17f3e 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -19,7 +19,8 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#undef DEBUG_LOW +/* Enables debugging of low-level hash table routines - careful! */ +#undef DEBUG #include <linux/kernel.h> #include <linux/dma-mapping.h> @@ -40,12 +41,8 @@ #include <asm/smp.h> #include "plpar_wrappers.h" +#include "pseries.h" -#ifdef DEBUG_LOW -#define DBG_LOW(fmt...) do { udbg_printf(fmt); } while(0) -#else -#define DBG_LOW(fmt...) do { } while(0) -#endif /* in hvCall.S */ EXPORT_SYMBOL(plpar_hcall); @@ -195,6 +192,8 @@ void __init udbg_init_debug_lpar(void) udbg_putc = udbg_putcLP; udbg_getc = udbg_getcLP; udbg_getc_poll = udbg_getc_pollLP; + + register_early_udbg_console(); } /* returns 0 if couldn't find or use /chosen/stdout as console */ @@ -203,7 +202,6 @@ void __init find_udbg_vterm(void) struct device_node *stdout_node; const u32 *termno; const char *name; - int add_console; /* find the boot console from /chosen/stdout */ if (!of_chosen) @@ -219,8 +217,6 @@ void __init find_udbg_vterm(void) printk(KERN_WARNING "stdout node missing 'name' property!\n"); goto out; } - /* The user has requested a console so this is already set up. */ - add_console = !strstr(cmd_line, "console="); /* Check if it's a virtual terminal */ if (strncmp(name, "vty", 3) != 0) @@ -234,15 +230,13 @@ void __init find_udbg_vterm(void) udbg_putc = udbg_putcLP; udbg_getc = udbg_getcLP; udbg_getc_poll = udbg_getc_pollLP; - if (add_console) - add_preferred_console("hvc", termno[0] & 0xff, NULL); + add_preferred_console("hvc", termno[0] & 0xff, NULL); } else if (of_device_is_compatible(stdout_node, "hvterm-protocol")) { vtermno = termno[0]; udbg_putc = udbg_hvsi_putc; udbg_getc = udbg_hvsi_getc; udbg_getc_poll = udbg_hvsi_getc_poll; - if (add_console) - add_preferred_console("hvsi", termno[0] & 0xff, NULL); + add_preferred_console("hvsi", termno[0] & 0xff, NULL); } out: of_node_put(stdout_node); @@ -292,15 +286,15 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group, unsigned long hpte_v, hpte_r; if (!(vflags & HPTE_V_BOLTED)) - DBG_LOW("hpte_insert(group=%lx, va=%016lx, pa=%016lx, " - "rflags=%lx, vflags=%lx, psize=%d)\n", - hpte_group, va, pa, rflags, vflags, psize); + pr_debug("hpte_insert(group=%lx, va=%016lx, pa=%016lx, " + "rflags=%lx, vflags=%lx, psize=%d)\n", + hpte_group, va, pa, rflags, vflags, psize); hpte_v = hpte_encode_v(va, psize, ssize) | vflags | HPTE_V_VALID; hpte_r = hpte_encode_r(pa, psize) | rflags; if (!(vflags & HPTE_V_BOLTED)) - DBG_LOW(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r); + pr_debug(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r); /* Now fill in the actual HPTE */ /* Set CEC cookie to 0 */ @@ -317,7 +311,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group, lpar_rc = plpar_pte_enter(flags, hpte_group, hpte_v, hpte_r, &slot); if (unlikely(lpar_rc == H_PTEG_FULL)) { if (!(vflags & HPTE_V_BOLTED)) - DBG_LOW(" full\n"); + pr_debug(" full\n"); return -1; } @@ -328,11 +322,11 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group, */ if (unlikely(lpar_rc != H_SUCCESS)) { if (!(vflags & HPTE_V_BOLTED)) - DBG_LOW(" lpar err %d\n", lpar_rc); + pr_debug(" lpar err %lu\n", lpar_rc); return -2; } if (!(vflags & HPTE_V_BOLTED)) - DBG_LOW(" -> slot: %d\n", slot & 7); + pr_debug(" -> slot: %lu\n", slot & 7); /* Because of iSeries, we have to pass down the secondary * bucket bit here as well @@ -424,17 +418,17 @@ static long pSeries_lpar_hpte_updatepp(unsigned long slot, want_v = hpte_encode_avpn(va, psize, ssize); - DBG_LOW(" update: avpnv=%016lx, hash=%016lx, f=%x, psize: %d ... ", - want_v, slot, flags, psize); + pr_debug(" update: avpnv=%016lx, hash=%016lx, f=%lx, psize: %d ...", + want_v, slot, flags, psize); lpar_rc = plpar_pte_protect(flags, slot, want_v); if (lpar_rc == H_NOT_FOUND) { - DBG_LOW("not found !\n"); + pr_debug("not found !\n"); return -1; } - DBG_LOW("ok\n"); + pr_debug("ok\n"); BUG_ON(lpar_rc != H_SUCCESS); @@ -509,8 +503,8 @@ static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long va, unsigned long lpar_rc; unsigned long dummy1, dummy2; - DBG_LOW(" inval : slot=%lx, va=%016lx, psize: %d, local: %d", - slot, va, psize, local); + pr_debug(" inval : slot=%lx, va=%016lx, psize: %d, local: %d\n", + slot, va, psize, local); want_v = hpte_encode_avpn(va, psize, ssize); lpar_rc = plpar_pte_remove(H_AVPN, slot, want_v, &dummy1, &dummy2); @@ -520,6 +514,20 @@ static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long va, BUG_ON(lpar_rc != H_SUCCESS); } +static void pSeries_lpar_hpte_removebolted(unsigned long ea, + int psize, int ssize) +{ + unsigned long slot, vsid, va; + + vsid = get_kernel_vsid(ea, ssize); + va = hpt_va(ea, vsid, ssize); + + slot = pSeries_lpar_hpte_find(va, psize, ssize); + BUG_ON(slot == -1); + + pSeries_lpar_hpte_invalidate(slot, va, psize, ssize, 0); +} + /* Flag bits for H_BULK_REMOVE */ #define HBR_REQUEST 0x4000000000000000UL #define HBR_RESPONSE 0x8000000000000000UL @@ -597,6 +605,7 @@ void __init hpte_init_lpar(void) ppc_md.hpte_updateboltedpp = pSeries_lpar_hpte_updateboltedpp; ppc_md.hpte_insert = pSeries_lpar_hpte_insert; ppc_md.hpte_remove = pSeries_lpar_hpte_remove; + ppc_md.hpte_removebolted = pSeries_lpar_hpte_removebolted; ppc_md.flush_hash_range = pSeries_lpar_flush_hash_range; ppc_md.hpte_clear_all = pSeries_lpar_hptab_clear; } diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c index 5a5a19e40bb4..21a6d55418f1 100644 --- a/arch/powerpc/platforms/pseries/pci_dlpar.c +++ b/arch/powerpc/platforms/pseries/pci_dlpar.c @@ -88,11 +88,8 @@ pcibios_fixup_new_pci_devices(struct pci_bus *bus) struct pci_dev *dev; list_for_each_entry(dev, &bus->devices, bus_list) { - /* - * Skip already-present devices (which are on the - * global device list.) - */ - if (list_empty(&dev->global_list)) { + /* Skip already-added devices */ + if (!dev->is_added) { int i; /* Fill device archdata and setup iommu table */ @@ -123,7 +120,7 @@ pcibios_pci_config_bridge(struct pci_dev *dev) /* Add to children of PCI bridge dev->bus */ child_bus = pci_add_new_bus(dev->bus, dev, sec_busno); if (!child_bus) { - printk (KERN_ERR "%s: could not add second bus\n", __FUNCTION__); + printk (KERN_ERR "%s: could not add second bus\n", __func__); return -EIO; } sprintf(child_bus->name, "PCI Bus #%02x", child_bus->number); diff --git a/arch/powerpc/platforms/pseries/phyp_dump.c b/arch/powerpc/platforms/pseries/phyp_dump.c new file mode 100644 index 000000000000..edbc012c2ebc --- /dev/null +++ b/arch/powerpc/platforms/pseries/phyp_dump.c @@ -0,0 +1,507 @@ +/* + * Hypervisor-assisted dump + * + * Linas Vepstas, Manish Ahuja 2008 + * Copyright 2008 IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include <linux/init.h> +#include <linux/kobject.h> +#include <linux/mm.h> +#include <linux/of.h> +#include <linux/pfn.h> +#include <linux/swap.h> +#include <linux/sysfs.h> + +#include <asm/page.h> +#include <asm/phyp_dump.h> +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/rtas.h> + +/* Variables, used to communicate data between early boot and late boot */ +static struct phyp_dump phyp_dump_vars; +struct phyp_dump *phyp_dump_info = &phyp_dump_vars; + +static int ibm_configure_kernel_dump; +/* ------------------------------------------------- */ +/* RTAS interfaces to declare the dump regions */ + +struct dump_section { + u32 dump_flags; + u16 source_type; + u16 error_flags; + u64 source_address; + u64 source_length; + u64 length_copied; + u64 destination_address; +}; + +struct phyp_dump_header { + u32 version; + u16 num_of_sections; + u16 status; + + u32 first_offset_section; + u32 dump_disk_section; + u64 block_num_dd; + u64 num_of_blocks_dd; + u32 offset_dd; + u32 maxtime_to_auto; + /* No dump disk path string used */ + + struct dump_section cpu_data; + struct dump_section hpte_data; + struct dump_section kernel_data; +}; + +/* The dump header *must be* in low memory, so .bss it */ +static struct phyp_dump_header phdr; + +#define NUM_DUMP_SECTIONS 3 +#define DUMP_HEADER_VERSION 0x1 +#define DUMP_REQUEST_FLAG 0x1 +#define DUMP_SOURCE_CPU 0x0001 +#define DUMP_SOURCE_HPTE 0x0002 +#define DUMP_SOURCE_RMO 0x0011 +#define DUMP_ERROR_FLAG 0x2000 +#define DUMP_TRIGGERED 0x4000 +#define DUMP_PERFORMED 0x8000 + + +/** + * init_dump_header() - initialize the header declaring a dump + * Returns: length of dump save area. + * + * When the hypervisor saves crashed state, it needs to put + * it somewhere. The dump header tells the hypervisor where + * the data can be saved. + */ +static unsigned long init_dump_header(struct phyp_dump_header *ph) +{ + unsigned long addr_offset = 0; + + /* Set up the dump header */ + ph->version = DUMP_HEADER_VERSION; + ph->num_of_sections = NUM_DUMP_SECTIONS; + ph->status = 0; + + ph->first_offset_section = + (u32)offsetof(struct phyp_dump_header, cpu_data); + ph->dump_disk_section = 0; + ph->block_num_dd = 0; + ph->num_of_blocks_dd = 0; + ph->offset_dd = 0; + + ph->maxtime_to_auto = 0; /* disabled */ + + /* The first two sections are mandatory */ + ph->cpu_data.dump_flags = DUMP_REQUEST_FLAG; + ph->cpu_data.source_type = DUMP_SOURCE_CPU; + ph->cpu_data.source_address = 0; + ph->cpu_data.source_length = phyp_dump_info->cpu_state_size; + ph->cpu_data.destination_address = addr_offset; + addr_offset += phyp_dump_info->cpu_state_size; + + ph->hpte_data.dump_flags = DUMP_REQUEST_FLAG; + ph->hpte_data.source_type = DUMP_SOURCE_HPTE; + ph->hpte_data.source_address = 0; + ph->hpte_data.source_length = phyp_dump_info->hpte_region_size; + ph->hpte_data.destination_address = addr_offset; + addr_offset += phyp_dump_info->hpte_region_size; + + /* This section describes the low kernel region */ + ph->kernel_data.dump_flags = DUMP_REQUEST_FLAG; + ph->kernel_data.source_type = DUMP_SOURCE_RMO; + ph->kernel_data.source_address = PHYP_DUMP_RMR_START; + ph->kernel_data.source_length = PHYP_DUMP_RMR_END; + ph->kernel_data.destination_address = addr_offset; + addr_offset += ph->kernel_data.source_length; + + return addr_offset; +} + +static void print_dump_header(const struct phyp_dump_header *ph) +{ +#ifdef DEBUG + printk(KERN_INFO "dump header:\n"); + /* setup some ph->sections required */ + printk(KERN_INFO "version = %d\n", ph->version); + printk(KERN_INFO "Sections = %d\n", ph->num_of_sections); + printk(KERN_INFO "Status = 0x%x\n", ph->status); + + /* No ph->disk, so all should be set to 0 */ + printk(KERN_INFO "Offset to first section 0x%x\n", + ph->first_offset_section); + printk(KERN_INFO "dump disk sections should be zero\n"); + printk(KERN_INFO "dump disk section = %d\n", ph->dump_disk_section); + printk(KERN_INFO "block num = %ld\n", ph->block_num_dd); + printk(KERN_INFO "number of blocks = %ld\n", ph->num_of_blocks_dd); + printk(KERN_INFO "dump disk offset = %d\n", ph->offset_dd); + printk(KERN_INFO "Max auto time= %d\n", ph->maxtime_to_auto); + + /*set cpu state and hpte states as well scratch pad area */ + printk(KERN_INFO " CPU AREA \n"); + printk(KERN_INFO "cpu dump_flags =%d\n", ph->cpu_data.dump_flags); + printk(KERN_INFO "cpu source_type =%d\n", ph->cpu_data.source_type); + printk(KERN_INFO "cpu error_flags =%d\n", ph->cpu_data.error_flags); + printk(KERN_INFO "cpu source_address =%lx\n", + ph->cpu_data.source_address); + printk(KERN_INFO "cpu source_length =%lx\n", + ph->cpu_data.source_length); + printk(KERN_INFO "cpu length_copied =%lx\n", + ph->cpu_data.length_copied); + + printk(KERN_INFO " HPTE AREA \n"); + printk(KERN_INFO "HPTE dump_flags =%d\n", ph->hpte_data.dump_flags); + printk(KERN_INFO "HPTE source_type =%d\n", ph->hpte_data.source_type); + printk(KERN_INFO "HPTE error_flags =%d\n", ph->hpte_data.error_flags); + printk(KERN_INFO "HPTE source_address =%lx\n", + ph->hpte_data.source_address); + printk(KERN_INFO "HPTE source_length =%lx\n", + ph->hpte_data.source_length); + printk(KERN_INFO "HPTE length_copied =%lx\n", + ph->hpte_data.length_copied); + + printk(KERN_INFO " SRSD AREA \n"); + printk(KERN_INFO "SRSD dump_flags =%d\n", ph->kernel_data.dump_flags); + printk(KERN_INFO "SRSD source_type =%d\n", ph->kernel_data.source_type); + printk(KERN_INFO "SRSD error_flags =%d\n", ph->kernel_data.error_flags); + printk(KERN_INFO "SRSD source_address =%lx\n", + ph->kernel_data.source_address); + printk(KERN_INFO "SRSD source_length =%lx\n", + ph->kernel_data.source_length); + printk(KERN_INFO "SRSD length_copied =%lx\n", + ph->kernel_data.length_copied); +#endif +} + +static ssize_t show_phyp_dump_active(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) +{ + + /* create filesystem entry so kdump is phyp-dump aware */ + return sprintf(buf, "%lx\n", phyp_dump_info->phyp_dump_at_boot); +} + +static struct kobj_attribute pdl = __ATTR(phyp_dump_active, 0600, + show_phyp_dump_active, + NULL); + +static void register_dump_area(struct phyp_dump_header *ph, unsigned long addr) +{ + int rc; + + /* Add addr value if not initialized before */ + if (ph->cpu_data.destination_address == 0) { + ph->cpu_data.destination_address += addr; + ph->hpte_data.destination_address += addr; + ph->kernel_data.destination_address += addr; + } + + /* ToDo Invalidate kdump and free memory range. */ + + do { + rc = rtas_call(ibm_configure_kernel_dump, 3, 1, NULL, + 1, ph, sizeof(struct phyp_dump_header)); + } while (rtas_busy_delay(rc)); + + if (rc) { + printk(KERN_ERR "phyp-dump: unexpected error (%d) on " + "register\n", rc); + print_dump_header(ph); + return; + } + + rc = sysfs_create_file(kernel_kobj, &pdl.attr); + if (rc) + printk(KERN_ERR "phyp-dump: unable to create sysfs" + " file (%d)\n", rc); +} + +static +void invalidate_last_dump(struct phyp_dump_header *ph, unsigned long addr) +{ + int rc; + + /* Add addr value if not initialized before */ + if (ph->cpu_data.destination_address == 0) { + ph->cpu_data.destination_address += addr; + ph->hpte_data.destination_address += addr; + ph->kernel_data.destination_address += addr; + } + + do { + rc = rtas_call(ibm_configure_kernel_dump, 3, 1, NULL, + 2, ph, sizeof(struct phyp_dump_header)); + } while (rtas_busy_delay(rc)); + + if (rc) { + printk(KERN_ERR "phyp-dump: unexpected error (%d) " + "on invalidate\n", rc); + print_dump_header(ph); + } +} + +/* ------------------------------------------------- */ +/** + * release_memory_range -- release memory previously lmb_reserved + * @start_pfn: starting physical frame number + * @nr_pages: number of pages to free. + * + * This routine will release memory that had been previously + * lmb_reserved in early boot. The released memory becomes + * available for genreal use. + */ +static void release_memory_range(unsigned long start_pfn, + unsigned long nr_pages) +{ + struct page *rpage; + unsigned long end_pfn; + long i; + + end_pfn = start_pfn + nr_pages; + + for (i = start_pfn; i <= end_pfn; i++) { + rpage = pfn_to_page(i); + if (PageReserved(rpage)) { + ClearPageReserved(rpage); + init_page_count(rpage); + __free_page(rpage); + totalram_pages++; + } + } +} + +/** + * track_freed_range -- Counts the range being freed. + * Once the counter goes to zero, it re-registers dump for + * future use. + */ +static void +track_freed_range(unsigned long addr, unsigned long length) +{ + static unsigned long scratch_area_size, reserved_area_size; + + if (addr < phyp_dump_info->init_reserve_start) + return; + + if ((addr >= phyp_dump_info->init_reserve_start) && + (addr <= phyp_dump_info->init_reserve_start + + phyp_dump_info->init_reserve_size)) + reserved_area_size += length; + + if ((addr >= phyp_dump_info->reserved_scratch_addr) && + (addr <= phyp_dump_info->reserved_scratch_addr + + phyp_dump_info->reserved_scratch_size)) + scratch_area_size += length; + + if ((reserved_area_size == phyp_dump_info->init_reserve_size) && + (scratch_area_size == phyp_dump_info->reserved_scratch_size)) { + + invalidate_last_dump(&phdr, + phyp_dump_info->reserved_scratch_addr); + register_dump_area(&phdr, + phyp_dump_info->reserved_scratch_addr); + } +} + +/* ------------------------------------------------- */ +/** + * sysfs_release_region -- sysfs interface to release memory range. + * + * Usage: + * "echo <start addr> <length> > /sys/kernel/release_region" + * + * Example: + * "echo 0x40000000 0x10000000 > /sys/kernel/release_region" + * + * will release 256MB starting at 1GB. + */ +static ssize_t store_release_region(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t count) +{ + unsigned long start_addr, length, end_addr; + unsigned long start_pfn, nr_pages; + ssize_t ret; + + ret = sscanf(buf, "%lx %lx", &start_addr, &length); + if (ret != 2) + return -EINVAL; + + track_freed_range(start_addr, length); + + /* Range-check - don't free any reserved memory that + * wasn't reserved for phyp-dump */ + if (start_addr < phyp_dump_info->init_reserve_start) + start_addr = phyp_dump_info->init_reserve_start; + + end_addr = phyp_dump_info->init_reserve_start + + phyp_dump_info->init_reserve_size; + if (start_addr+length > end_addr) + length = end_addr - start_addr; + + /* Release the region of memory assed in by user */ + start_pfn = PFN_DOWN(start_addr); + nr_pages = PFN_DOWN(length); + release_memory_range(start_pfn, nr_pages); + + return count; +} + +static ssize_t show_release_region(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) +{ + u64 second_addr_range; + + /* total reserved size - start of scratch area */ + second_addr_range = phyp_dump_info->init_reserve_size - + phyp_dump_info->reserved_scratch_size; + return sprintf(buf, "CPU:0x%lx-0x%lx: HPTE:0x%lx-0x%lx:" + " DUMP:0x%lx-0x%lx, 0x%lx-0x%lx:\n", + phdr.cpu_data.destination_address, + phdr.cpu_data.length_copied, + phdr.hpte_data.destination_address, + phdr.hpte_data.length_copied, + phdr.kernel_data.destination_address, + phdr.kernel_data.length_copied, + phyp_dump_info->init_reserve_start, + second_addr_range); +} + +static struct kobj_attribute rr = __ATTR(release_region, 0600, + show_release_region, + store_release_region); + +static int __init phyp_dump_setup(void) +{ + struct device_node *rtas; + const struct phyp_dump_header *dump_header = NULL; + unsigned long dump_area_start; + unsigned long dump_area_length; + int header_len = 0; + int rc; + + /* If no memory was reserved in early boot, there is nothing to do */ + if (phyp_dump_info->init_reserve_size == 0) + return 0; + + /* Return if phyp dump not supported */ + if (!phyp_dump_info->phyp_dump_configured) + return -ENOSYS; + + /* Is there dump data waiting for us? If there isn't, + * then register a new dump area, and release all of + * the rest of the reserved ram. + * + * The /rtas/ibm,kernel-dump rtas node is present only + * if there is dump data waiting for us. + */ + rtas = of_find_node_by_path("/rtas"); + if (rtas) { + dump_header = of_get_property(rtas, "ibm,kernel-dump", + &header_len); + of_node_put(rtas); + } + + print_dump_header(dump_header); + dump_area_length = init_dump_header(&phdr); + /* align down */ + dump_area_start = phyp_dump_info->init_reserve_start & PAGE_MASK; + + if (dump_header == NULL) { + register_dump_area(&phdr, dump_area_start); + return 0; + } + + /* re-register the dump area, if old dump was invalid */ + if ((dump_header) && (dump_header->status & DUMP_ERROR_FLAG)) { + invalidate_last_dump(&phdr, dump_area_start); + register_dump_area(&phdr, dump_area_start); + return 0; + } + + if (dump_header) { + phyp_dump_info->reserved_scratch_addr = + dump_header->cpu_data.destination_address; + phyp_dump_info->reserved_scratch_size = + dump_header->cpu_data.source_length + + dump_header->hpte_data.source_length + + dump_header->kernel_data.source_length; + } + + /* Should we create a dump_subsys, analogous to s390/ipl.c ? */ + rc = sysfs_create_file(kernel_kobj, &rr.attr); + if (rc) + printk(KERN_ERR "phyp-dump: unable to create sysfs file (%d)\n", + rc); + + /* ToDo: re-register the dump area, for next time. */ + return 0; +} +machine_subsys_initcall(pseries, phyp_dump_setup); + +int __init early_init_dt_scan_phyp_dump(unsigned long node, + const char *uname, int depth, void *data) +{ + const unsigned int *sizes; + + phyp_dump_info->phyp_dump_configured = 0; + phyp_dump_info->phyp_dump_is_active = 0; + + if (depth != 1 || strcmp(uname, "rtas") != 0) + return 0; + + if (of_get_flat_dt_prop(node, "ibm,configure-kernel-dump", NULL)) + phyp_dump_info->phyp_dump_configured++; + + if (of_get_flat_dt_prop(node, "ibm,dump-kernel", NULL)) + phyp_dump_info->phyp_dump_is_active++; + + sizes = of_get_flat_dt_prop(node, "ibm,configure-kernel-dump-sizes", + NULL); + if (!sizes) + return 0; + + if (sizes[0] == 1) + phyp_dump_info->cpu_state_size = *((unsigned long *)&sizes[1]); + + if (sizes[3] == 2) + phyp_dump_info->hpte_region_size = + *((unsigned long *)&sizes[4]); + return 1; +} + +/* Look for phyp_dump= cmdline option */ +static int __init early_phyp_dump_enabled(char *p) +{ + phyp_dump_info->phyp_dump_at_boot = 1; + + if (!p) + return 0; + + if (strncmp(p, "1", 1) == 0) + phyp_dump_info->phyp_dump_at_boot = 1; + else if (strncmp(p, "0", 1) == 0) + phyp_dump_info->phyp_dump_at_boot = 0; + + return 0; +} +early_param("phyp_dump", early_phyp_dump_enabled); + +/* Look for phyp_dump_reserve_size= cmdline option */ +static int __init early_phyp_dump_reserve_size(char *p) +{ + if (p) + phyp_dump_info->reserve_bootvar = memparse(p, &p); + + return 0; +} +early_param("phyp_dump_reserve_size", early_phyp_dump_reserve_size); diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h index 61136d019554..9e17c0d2a0c8 100644 --- a/arch/powerpc/platforms/pseries/pseries.h +++ b/arch/powerpc/platforms/pseries/pseries.h @@ -38,4 +38,6 @@ extern void pSeries_final_fixup(void); /* Poweron flag used for enabling auto ups restart */ extern unsigned long rtas_poweron_auto; +extern void find_udbg_vterm(void); + #endif /* _PSERIES_PSERIES_H */ diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c index a1ab25c7082f..2b548afd1003 100644 --- a/arch/powerpc/platforms/pseries/ras.c +++ b/arch/powerpc/platforms/pseries/ras.c @@ -67,8 +67,6 @@ static int ras_check_exception_token; static irqreturn_t ras_epow_interrupt(int irq, void *dev_id); static irqreturn_t ras_error_interrupt(int irq, void *dev_id); -/* #define DEBUG */ - static void request_ras_irqs(struct device_node *np, irq_handler_t handler, @@ -237,7 +235,7 @@ static irqreturn_t ras_error_interrupt(int irq, void *dev_id) printk(KERN_EMERG "Error: Fatal hardware error <0x%lx 0x%x>\n", *((unsigned long *)&ras_log_buf), status); -#ifndef DEBUG +#ifndef DEBUG_RTAS_POWER_OFF /* Don't actually power off when debugging so we can test * without actually failing while injecting errors. * Error data will not be logged to syslog. diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c index 2800fced8c7c..ac75c10de278 100644 --- a/arch/powerpc/platforms/pseries/reconfig.c +++ b/arch/powerpc/platforms/pseries/reconfig.c @@ -222,14 +222,14 @@ static char * parse_next_property(char *buf, char *end, char **name, int *length tmp = strchr(buf, ' '); if (!tmp) { printk(KERN_ERR "property parse failed in %s at line %d\n", - __FUNCTION__, __LINE__); + __func__, __LINE__); return NULL; } *tmp = '\0'; if (++tmp >= end) { printk(KERN_ERR "property parse failed in %s at line %d\n", - __FUNCTION__, __LINE__); + __func__, __LINE__); return NULL; } @@ -238,12 +238,12 @@ static char * parse_next_property(char *buf, char *end, char **name, int *length *length = simple_strtoul(tmp, &tmp, 10); if (*length == -1) { printk(KERN_ERR "property parse failed in %s at line %d\n", - __FUNCTION__, __LINE__); + __func__, __LINE__); return NULL; } if (*tmp != ' ' || ++tmp >= end) { printk(KERN_ERR "property parse failed in %s at line %d\n", - __FUNCTION__, __LINE__); + __func__, __LINE__); return NULL; } @@ -252,12 +252,12 @@ static char * parse_next_property(char *buf, char *end, char **name, int *length tmp += *length; if (tmp > end) { printk(KERN_ERR "property parse failed in %s at line %d\n", - __FUNCTION__, __LINE__); + __func__, __LINE__); return NULL; } else if (tmp < end && *tmp != ' ' && *tmp != '\0') { printk(KERN_ERR "property parse failed in %s at line %d\n", - __FUNCTION__, __LINE__); + __func__, __LINE__); return NULL; } tmp++; diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c index e3078ce41518..befadd4f9524 100644 --- a/arch/powerpc/platforms/pseries/rtasd.c +++ b/arch/powerpc/platforms/pseries/rtasd.c @@ -29,11 +29,6 @@ #include <asm/atomic.h> #include <asm/machdep.h> -#if 0 -#define DEBUG(A...) printk(KERN_ERR A) -#else -#define DEBUG(A...) -#endif static DEFINE_SPINLOCK(rtasd_log_lock); @@ -198,7 +193,7 @@ void pSeries_log_error(char *buf, unsigned int err_type, int fatal) unsigned long s; int len = 0; - DEBUG("logging event\n"); + pr_debug("rtasd: logging event\n"); if (buf == NULL) return; @@ -409,7 +404,8 @@ static int rtasd(void *unused) daemonize("rtasd"); printk(KERN_DEBUG "RTAS daemon started\n"); - DEBUG("will sleep for %d milliseconds\n", (30000/rtas_event_scan_rate)); + pr_debug("rtasd: will sleep for %d milliseconds\n", + (30000 / rtas_event_scan_rate)); /* See if we have any error stored in NVRAM */ memset(logdata, 0, rtas_error_log_max); @@ -428,9 +424,9 @@ static int rtasd(void *unused) do_event_scan_all_cpus(1000); if (surveillance_timeout != -1) { - DEBUG("enabling surveillance\n"); + pr_debug("rtasd: enabling surveillance\n"); enable_surveillance(surveillance_timeout); - DEBUG("surveillance enabled\n"); + pr_debug("rtasd: surveillance enabled\n"); } /* Delay should be at least one second since some diff --git a/arch/powerpc/platforms/pseries/scanlog.c b/arch/powerpc/platforms/pseries/scanlog.c index 8e1ef168e2dd..bec3803f0618 100644 --- a/arch/powerpc/platforms/pseries/scanlog.c +++ b/arch/powerpc/platforms/pseries/scanlog.c @@ -38,9 +38,7 @@ #define SCANLOG_HWERROR -1 #define SCANLOG_CONTINUE 1 -#define DEBUG(A...) do { if (scanlog_debug) printk(KERN_ERR "scanlog: " A); } while (0) -static int scanlog_debug; static unsigned int ibm_scan_log_dump; /* RTAS token */ static struct proc_dir_entry *proc_ppc64_scan_log_dump; /* The proc file */ @@ -86,14 +84,14 @@ static ssize_t scanlog_read(struct file *file, char __user *buf, memcpy(data, rtas_data_buf, RTAS_DATA_BUF_SIZE); spin_unlock(&rtas_data_buf_lock); - DEBUG("status=%d, data[0]=%x, data[1]=%x, data[2]=%x\n", - status, data[0], data[1], data[2]); + pr_debug("scanlog: status=%d, data[0]=%x, data[1]=%x, " \ + "data[2]=%x\n", status, data[0], data[1], data[2]); switch (status) { case SCANLOG_COMPLETE: - DEBUG("hit eof\n"); + pr_debug("scanlog: hit eof\n"); return 0; case SCANLOG_HWERROR: - DEBUG("hardware error reading scan log data\n"); + pr_debug("scanlog: hardware error reading data\n"); return -EIO; case SCANLOG_CONTINUE: /* We may or may not have data yet */ @@ -110,7 +108,8 @@ static ssize_t scanlog_read(struct file *file, char __user *buf, /* Assume extended busy */ wait_time = rtas_busy_delay_time(status); if (!wait_time) { - printk(KERN_ERR "scanlog: unknown error from rtas: %d\n", status); + printk(KERN_ERR "scanlog: unknown error " \ + "from rtas: %d\n", status); return -EIO; } } @@ -134,15 +133,9 @@ static ssize_t scanlog_write(struct file * file, const char __user * buf, if (buf) { if (strncmp(stkbuf, "reset", 5) == 0) { - DEBUG("reset scanlog\n"); + pr_debug("scanlog: reset scanlog\n"); status = rtas_call(ibm_scan_log_dump, 2, 1, NULL, 0, 0); - DEBUG("rtas returns %d\n", status); - } else if (strncmp(stkbuf, "debugon", 7) == 0) { - printk(KERN_ERR "scanlog: debug on\n"); - scanlog_debug = 1; - } else if (strncmp(stkbuf, "debugoff", 8) == 0) { - printk(KERN_ERR "scanlog: debug off\n"); - scanlog_debug = 0; + pr_debug("scanlog: rtas returns %d\n", status); } } return count; @@ -195,31 +188,30 @@ const struct file_operations scanlog_fops = { static int __init scanlog_init(void) { struct proc_dir_entry *ent; + void *data; + int err = -ENOMEM; ibm_scan_log_dump = rtas_token("ibm,scan-log-dump"); - if (ibm_scan_log_dump == RTAS_UNKNOWN_SERVICE) { - printk(KERN_ERR "scan-log-dump not implemented on this system\n"); - return -EIO; - } + if (ibm_scan_log_dump == RTAS_UNKNOWN_SERVICE) + return -ENODEV; - ent = create_proc_entry("ppc64/rtas/scan-log-dump", S_IRUSR, NULL); - if (ent) { - ent->proc_fops = &scanlog_fops; - /* Ideally we could allocate a buffer < 4G */ - ent->data = kmalloc(RTAS_DATA_BUF_SIZE, GFP_KERNEL); - if (!ent->data) { - printk(KERN_ERR "Failed to allocate a buffer\n"); - remove_proc_entry("scan-log-dump", ent->parent); - return -ENOMEM; - } - ((unsigned int *)ent->data)[0] = 0; - } else { - printk(KERN_ERR "Failed to create ppc64/scan-log-dump proc entry\n"); - return -EIO; - } + /* Ideally we could allocate a buffer < 4G */ + data = kzalloc(RTAS_DATA_BUF_SIZE, GFP_KERNEL); + if (!data) + goto err; + + ent = proc_create("ppc64/rtas/scan-log-dump", S_IRUSR, NULL, + &scanlog_fops); + if (!ent) + goto err; + + ent->data = data; proc_ppc64_scan_log_dump = ent; return 0; +err: + kfree(data); + return err; } static void __exit scanlog_cleanup(void) diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index fdb9b1c8f977..f5d29f5b13c1 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -16,8 +16,6 @@ * bootup setup stuff.. */ -#undef DEBUG - #include <linux/cpu.h> #include <linux/errno.h> #include <linux/sched.h> @@ -70,14 +68,6 @@ #include "plpar_wrappers.h" #include "pseries.h" -#ifdef DEBUG -#define DBG(fmt...) udbg_printf(fmt) -#else -#define DBG(fmt...) -#endif - -/* move those away to a .h */ -extern void find_udbg_vterm(void); int fwnmi_active; /* TRUE if an FWNMI handler is present */ @@ -127,14 +117,60 @@ void pseries_8259_cascade(unsigned int irq, struct irq_desc *desc) desc->chip->eoi(irq); } -static void __init pseries_mpic_init_IRQ(void) +static void __init pseries_setup_i8259_cascade(void) { - struct device_node *np, *old, *cascade = NULL; - const unsigned int *addrp; + struct device_node *np, *old, *found = NULL; + unsigned int cascade; + const u32 *addrp; unsigned long intack = 0; + int naddr; + + for_each_node_by_type(np, "interrupt-controller") { + if (of_device_is_compatible(np, "chrp,iic")) { + found = np; + break; + } + } + + if (found == NULL) { + printk(KERN_DEBUG "pic: no ISA interrupt controller\n"); + return; + } + + cascade = irq_of_parse_and_map(found, 0); + if (cascade == NO_IRQ) { + printk(KERN_ERR "pic: failed to map cascade interrupt"); + return; + } + pr_debug("pic: cascade mapped to irq %d\n", cascade); + + for (old = of_node_get(found); old != NULL ; old = np) { + np = of_get_parent(old); + of_node_put(old); + if (np == NULL) + break; + if (strcmp(np->name, "pci") != 0) + continue; + addrp = of_get_property(np, "8259-interrupt-acknowledge", NULL); + if (addrp == NULL) + continue; + naddr = of_n_addr_cells(np); + intack = addrp[naddr-1]; + if (naddr > 1) + intack |= ((unsigned long)addrp[naddr-2]) << 32; + } + if (intack) + printk(KERN_DEBUG "pic: PCI 8259 intack at 0x%016lx\n", intack); + i8259_init(found, intack); + of_node_put(found); + set_irq_chained_handler(cascade, pseries_8259_cascade); +} + +static void __init pseries_mpic_init_IRQ(void) +{ + struct device_node *np; const unsigned int *opprop; unsigned long openpic_addr = 0; - unsigned int cascade_irq; int naddr, n, i, opplen; struct mpic *mpic; @@ -167,43 +203,13 @@ static void __init pseries_mpic_init_IRQ(void) mpic_init(mpic); /* Look for cascade */ - for_each_node_by_type(np, "interrupt-controller") - if (of_device_is_compatible(np, "chrp,iic")) { - cascade = np; - break; - } - if (cascade == NULL) - return; - - cascade_irq = irq_of_parse_and_map(cascade, 0); - if (cascade_irq == NO_IRQ) { - printk(KERN_ERR "mpic: failed to map cascade interrupt"); - return; - } + pseries_setup_i8259_cascade(); +} - /* Check ACK type */ - for (old = of_node_get(cascade); old != NULL ; old = np) { - np = of_get_parent(old); - of_node_put(old); - if (np == NULL) - break; - if (strcmp(np->name, "pci") != 0) - continue; - addrp = of_get_property(np, "8259-interrupt-acknowledge", - NULL); - if (addrp == NULL) - continue; - naddr = of_n_addr_cells(np); - intack = addrp[naddr-1]; - if (naddr > 1) - intack |= ((unsigned long)addrp[naddr-2]) << 32; - } - if (intack) - printk(KERN_DEBUG "mpic: PCI 8259 intack at 0x%016lx\n", - intack); - i8259_init(cascade, intack); - of_node_put(cascade); - set_irq_chained_handler(cascade_irq, pseries_8259_cascade); +static void __init pseries_xics_init_IRQ(void) +{ + xics_init_IRQ(); + pseries_setup_i8259_cascade(); } static void pseries_lpar_enable_pmcs(void) @@ -235,7 +241,7 @@ static void __init pseries_discover_pic(void) smp_init_pseries_mpic(); return; } else if (strstr(typep, "ppc-xicp")) { - ppc_md.init_IRQ = xics_init_IRQ; + ppc_md.init_IRQ = pseries_xics_init_IRQ; setup_kexec_cpu_down_xics(); smp_init_pseries_xics(); return; @@ -313,7 +319,7 @@ static int pseries_set_xdabr(unsigned long dabr) */ static void __init pSeries_init_early(void) { - DBG(" -> pSeries_init_early()\n"); + pr_debug(" -> pSeries_init_early()\n"); if (firmware_has_feature(FW_FEATURE_LPAR)) find_udbg_vterm(); @@ -325,7 +331,7 @@ static void __init pSeries_init_early(void) iommu_init_early_pSeries(); - DBG(" <- pSeries_init_early()\n"); + pr_debug(" <- pSeries_init_early()\n"); } /* @@ -370,7 +376,7 @@ static int __init pSeries_probe(void) of_flat_dt_is_compatible(root, "IBM,CBEA")) return 0; - DBG("pSeries detected, looking for LPAR capability...\n"); + pr_debug("pSeries detected, looking for LPAR capability...\n"); /* Now try to figure out if we are running on LPAR */ of_scan_flat_dt(pSeries_probe_hypertas, NULL); @@ -380,8 +386,8 @@ static int __init pSeries_probe(void) else hpte_init_native(); - DBG("Machine is%s LPAR !\n", - (powerpc_firmware_features & FW_FEATURE_LPAR) ? "" : " not"); + pr_debug("Machine is%s LPAR !\n", + (powerpc_firmware_features & FW_FEATURE_LPAR) ? "" : " not"); return 1; } @@ -393,6 +399,7 @@ static void pseries_dedicated_idle_sleep(void) { unsigned int cpu = smp_processor_id(); unsigned long start_snooze; + unsigned long in_purr, out_purr; /* * Indicate to the HV that we are idle. Now would be @@ -400,6 +407,7 @@ static void pseries_dedicated_idle_sleep(void) */ get_lppaca()->idle = 1; get_lppaca()->donate_dedicated_cpu = 1; + in_purr = mfspr(SPRN_PURR); /* * We come in with interrupts disabled, and need_resched() @@ -432,6 +440,8 @@ static void pseries_dedicated_idle_sleep(void) out: HMT_medium(); + out_purr = mfspr(SPRN_PURR); + get_lppaca()->wait_state_cycles += out_purr - in_purr; get_lppaca()->donate_dedicated_cpu = 0; get_lppaca()->idle = 0; } diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index ea4c65917a64..9d8f8c84ab89 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -12,7 +12,6 @@ * 2 of the License, or (at your option) any later version. */ -#undef DEBUG #include <linux/kernel.h> #include <linux/module.h> @@ -51,12 +50,6 @@ #include "plpar_wrappers.h" #include "pseries.h" -#ifdef DEBUG -#include <asm/udbg.h> -#define DBG(fmt...) udbg_printf(fmt) -#else -#define DBG(fmt...) -#endif /* * The primary thread of each non-boot processor is recorded here before @@ -231,7 +224,7 @@ static void __init smp_init_pseries(void) { int i; - DBG(" -> smp_init_pSeries()\n"); + pr_debug(" -> smp_init_pSeries()\n"); /* Mark threads which are still spinning in hold loops. */ if (cpu_has_feature(CPU_FTR_SMT)) { @@ -255,7 +248,7 @@ static void __init smp_init_pseries(void) smp_ops->take_timebase = pSeries_take_timebase; } - DBG(" <- smp_init_pSeries()\n"); + pr_debug(" <- smp_init_pSeries()\n"); } #ifdef CONFIG_MPIC diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index ca52b587166d..ebebc28fe895 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -9,7 +9,6 @@ * 2 of the License, or (at your option) any later version. */ -#undef DEBUG #include <linux/types.h> #include <linux/threads.h> @@ -516,6 +515,8 @@ static struct irq_chip xics_pic_lpar = { .set_affinity = xics_set_affinity }; +/* Points to the irq_chip we're actually using */ +static struct irq_chip *xics_irq_chip; static int xics_host_match(struct irq_host *h, struct device_node *node) { @@ -526,23 +527,13 @@ static int xics_host_match(struct irq_host *h, struct device_node *node) return !of_device_is_compatible(node, "chrp,iic"); } -static int xics_host_map_direct(struct irq_host *h, unsigned int virq, - irq_hw_number_t hw) +static int xics_host_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw) { - pr_debug("xics: map_direct virq %d, hwirq 0x%lx\n", virq, hw); + pr_debug("xics: map virq %d, hwirq 0x%lx\n", virq, hw); get_irq_desc(virq)->status |= IRQ_LEVEL; - set_irq_chip_and_handler(virq, &xics_pic_direct, handle_fasteoi_irq); - return 0; -} - -static int xics_host_map_lpar(struct irq_host *h, unsigned int virq, - irq_hw_number_t hw) -{ - pr_debug("xics: map_direct virq %d, hwirq 0x%lx\n", virq, hw); - - get_irq_desc(virq)->status |= IRQ_LEVEL; - set_irq_chip_and_handler(virq, &xics_pic_lpar, handle_fasteoi_irq); + set_irq_chip_and_handler(virq, xics_irq_chip, handle_fasteoi_irq); return 0; } @@ -561,27 +552,20 @@ static int xics_host_xlate(struct irq_host *h, struct device_node *ct, return 0; } -static struct irq_host_ops xics_host_direct_ops = { +static struct irq_host_ops xics_host_ops = { .match = xics_host_match, - .map = xics_host_map_direct, - .xlate = xics_host_xlate, -}; - -static struct irq_host_ops xics_host_lpar_ops = { - .match = xics_host_match, - .map = xics_host_map_lpar, + .map = xics_host_map, .xlate = xics_host_xlate, }; static void __init xics_init_host(void) { - struct irq_host_ops *ops; - if (firmware_has_feature(FW_FEATURE_LPAR)) - ops = &xics_host_lpar_ops; + xics_irq_chip = &xics_pic_lpar; else - ops = &xics_host_direct_ops; - xics_host = irq_alloc_host(NULL, IRQ_HOST_MAP_TREE, 0, ops, + xics_irq_chip = &xics_pic_direct; + + xics_host = irq_alloc_host(NULL, IRQ_HOST_MAP_TREE, 0, &xics_host_ops, XICS_IRQ_SPURIOUS); BUG_ON(xics_host == NULL); irq_set_default_host(xics_host); @@ -655,52 +639,6 @@ static void __init xics_init_one_node(struct device_node *np, } } - -static void __init xics_setup_8259_cascade(void) -{ - struct device_node *np, *old, *found = NULL; - int cascade, naddr; - const u32 *addrp; - unsigned long intack = 0; - - for_each_node_by_type(np, "interrupt-controller") - if (of_device_is_compatible(np, "chrp,iic")) { - found = np; - break; - } - if (found == NULL) { - printk(KERN_DEBUG "xics: no ISA interrupt controller\n"); - return; - } - cascade = irq_of_parse_and_map(found, 0); - if (cascade == NO_IRQ) { - printk(KERN_ERR "xics: failed to map cascade interrupt"); - return; - } - pr_debug("xics: cascade mapped to irq %d\n", cascade); - - for (old = of_node_get(found); old != NULL ; old = np) { - np = of_get_parent(old); - of_node_put(old); - if (np == NULL) - break; - if (strcmp(np->name, "pci") != 0) - continue; - addrp = of_get_property(np, "8259-interrupt-acknowledge", NULL); - if (addrp == NULL) - continue; - naddr = of_n_addr_cells(np); - intack = addrp[naddr-1]; - if (naddr > 1) - intack |= ((unsigned long)addrp[naddr-2]) << 32; - } - if (intack) - printk(KERN_DEBUG "xics: PCI 8259 intack at 0x%016lx\n", intack); - i8259_init(found, intack); - of_node_put(found); - set_irq_chained_handler(cascade, pseries_8259_cascade); -} - void __init xics_init_IRQ(void) { struct device_node *np; @@ -733,8 +671,6 @@ void __init xics_init_IRQ(void) xics_setup_cpu(); - xics_setup_8259_cascade(); - ppc64_boot_msg(0x21, "XICS Done"); } @@ -763,7 +699,7 @@ void xics_request_IPIs(void) } #endif /* CONFIG_SMP */ -void xics_teardown_cpu() +void xics_teardown_cpu(void) { int cpu = smp_processor_id(); diff --git a/arch/powerpc/platforms/pseries/xics.h b/arch/powerpc/platforms/pseries/xics.h index c26bcff47b6d..1c5321ae8f2f 100644 --- a/arch/powerpc/platforms/pseries/xics.h +++ b/arch/powerpc/platforms/pseries/xics.h @@ -28,7 +28,4 @@ struct xics_ipi_struct { extern struct xics_ipi_struct xics_ipi_message[NR_CPUS] __cacheline_aligned; -struct irq_desc; -extern void pseries_8259_cascade(unsigned int irq, struct irq_desc *desc); - #endif /* _POWERPC_KERNEL_XICS_H */ diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 15f3e8527d77..6d386d0071a0 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_U3_DART) += dart_iommu.o obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o obj-$(CONFIG_FSL_SOC) += fsl_soc.o obj-$(CONFIG_FSL_PCI) += fsl_pci.o +obj-$(CONFIG_FSL_LBC) += fsl_lbc.o obj-$(CONFIG_RAPIDIO) += fsl_rio.o obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o obj-$(CONFIG_QUICC_ENGINE) += qe_lib/ @@ -27,6 +28,7 @@ obj-$(CONFIG_PPC_INDIRECT_PCI) += indirect_pci.o obj-$(CONFIG_PPC_I8259) += i8259.o obj-$(CONFIG_IPIC) += ipic.o obj-$(CONFIG_4xx) += uic.o +obj-$(CONFIG_4xx_SOC) += ppc4xx_soc.o obj-$(CONFIG_XILINX_VIRTEX) += xilinx_intc.o obj-$(CONFIG_OF_RTC) += of_rtc.o ifeq ($(CONFIG_PCI),y) diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c index d359d6e92975..7f59188cd9a1 100644 --- a/arch/powerpc/sysdev/axonram.c +++ b/arch/powerpc/sysdev/axonram.c @@ -143,7 +143,7 @@ axon_ram_make_request(struct request_queue *queue, struct bio *bio) */ static int axon_ram_direct_access(struct block_device *device, sector_t sector, - unsigned long *data) + void **kaddr, unsigned long *pfn) { struct axon_ram_bank *bank = device->bd_disk->private_data; loff_t offset; @@ -154,7 +154,8 @@ axon_ram_direct_access(struct block_device *device, sector_t sector, return -ERANGE; } - *data = bank->ph_addr + offset; + *kaddr = (void *)(bank->ph_addr + offset); + *pfn = virt_to_phys(kaddr) >> PAGE_SHIFT; return 0; } diff --git a/arch/powerpc/sysdev/bestcomm/bestcomm.c b/arch/powerpc/sysdev/bestcomm/bestcomm.c index f589999361e0..64ec7d629363 100644 --- a/arch/powerpc/sysdev/bestcomm/bestcomm.c +++ b/arch/powerpc/sysdev/bestcomm/bestcomm.c @@ -52,6 +52,10 @@ bcom_task_alloc(int bd_count, int bd_size, int priv_size) int i, tasknum = -1; struct bcom_task *tsk; + /* Don't try to do anything if bestcomm init failed */ + if (!bcom_eng) + return NULL; + /* Get and reserve a task num */ spin_lock(&bcom_eng->lock); @@ -484,8 +488,8 @@ mpc52xx_bcom_remove(struct of_device *op) } static struct of_device_id mpc52xx_bcom_of_match[] = { - { .type = "dma-controller", .compatible = "fsl,mpc5200-bestcomm", }, - { .type = "dma-controller", .compatible = "mpc5200-bestcomm", }, + { .compatible = "fsl,mpc5200-bestcomm", }, + { .compatible = "mpc5200-bestcomm", }, {}, }; diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c index df8bd2b64796..58292a086c16 100644 --- a/arch/powerpc/sysdev/cpm1.c +++ b/arch/powerpc/sysdev/cpm1.c @@ -44,9 +44,6 @@ #define CPM_MAP_SIZE (0x4000) -#ifndef CONFIG_PPC_CPM_NEW_BINDING -static void m8xx_cpm_dpinit(void); -#endif cpm8xx_t __iomem *cpmp; /* Pointer to comm processor space */ immap_t __iomem *mpc8xx_immr; static cpic8xx_t __iomem *cpic_reg; @@ -229,12 +226,7 @@ void __init cpm_reset(void) out_be32(&siu_conf->sc_sdcr, 1); immr_unmap(siu_conf); -#ifdef CONFIG_PPC_CPM_NEW_BINDING cpm_muram_init(); -#else - /* Reclaim the DP memory for our use. */ - m8xx_cpm_dpinit(); -#endif } static DEFINE_SPINLOCK(cmd_lock); @@ -257,7 +249,7 @@ int cpm_command(u32 command, u8 opcode) if ((in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0) goto out; - printk(KERN_ERR "%s(): Not able to issue CPM command\n", __FUNCTION__); + printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__); ret = -EIO; out: spin_unlock_irqrestore(&cmd_lock, flags); @@ -293,110 +285,6 @@ cpm_setbrg(uint brg, uint rate) CPM_BRG_EN | CPM_BRG_DIV16); } -#ifndef CONFIG_PPC_CPM_NEW_BINDING -/* - * dpalloc / dpfree bits. - */ -static spinlock_t cpm_dpmem_lock; -/* - * 16 blocks should be enough to satisfy all requests - * until the memory subsystem goes up... - */ -static rh_block_t cpm_boot_dpmem_rh_block[16]; -static rh_info_t cpm_dpmem_info; - -#define CPM_DPMEM_ALIGNMENT 8 -static u8 __iomem *dpram_vbase; -static phys_addr_t dpram_pbase; - -static void m8xx_cpm_dpinit(void) -{ - spin_lock_init(&cpm_dpmem_lock); - - dpram_vbase = cpmp->cp_dpmem; - dpram_pbase = get_immrbase() + offsetof(immap_t, im_cpm.cp_dpmem); - - /* Initialize the info header */ - rh_init(&cpm_dpmem_info, CPM_DPMEM_ALIGNMENT, - sizeof(cpm_boot_dpmem_rh_block) / - sizeof(cpm_boot_dpmem_rh_block[0]), - cpm_boot_dpmem_rh_block); - - /* - * Attach the usable dpmem area. - * XXX: This is actually crap. CPM_DATAONLY_BASE and - * CPM_DATAONLY_SIZE are a subset of the available dparm. It varies - * with the processor and the microcode patches applied / activated. - * But the following should be at least safe. - */ - rh_attach_region(&cpm_dpmem_info, CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE); -} - -/* - * Allocate the requested size worth of DP memory. - * This function returns an offset into the DPRAM area. - * Use cpm_dpram_addr() to get the virtual address of the area. - */ -unsigned long cpm_dpalloc(uint size, uint align) -{ - unsigned long start; - unsigned long flags; - - spin_lock_irqsave(&cpm_dpmem_lock, flags); - cpm_dpmem_info.alignment = align; - start = rh_alloc(&cpm_dpmem_info, size, "commproc"); - spin_unlock_irqrestore(&cpm_dpmem_lock, flags); - - return (uint)start; -} -EXPORT_SYMBOL(cpm_dpalloc); - -int cpm_dpfree(unsigned long offset) -{ - int ret; - unsigned long flags; - - spin_lock_irqsave(&cpm_dpmem_lock, flags); - ret = rh_free(&cpm_dpmem_info, offset); - spin_unlock_irqrestore(&cpm_dpmem_lock, flags); - - return ret; -} -EXPORT_SYMBOL(cpm_dpfree); - -unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align) -{ - unsigned long start; - unsigned long flags; - - spin_lock_irqsave(&cpm_dpmem_lock, flags); - cpm_dpmem_info.alignment = align; - start = rh_alloc_fixed(&cpm_dpmem_info, offset, size, "commproc"); - spin_unlock_irqrestore(&cpm_dpmem_lock, flags); - - return start; -} -EXPORT_SYMBOL(cpm_dpalloc_fixed); - -void cpm_dpdump(void) -{ - rh_dump(&cpm_dpmem_info); -} -EXPORT_SYMBOL(cpm_dpdump); - -void *cpm_dpram_addr(unsigned long offset) -{ - return (void *)(dpram_vbase + offset); -} -EXPORT_SYMBOL(cpm_dpram_addr); - -uint cpm_dpram_phys(u8 *addr) -{ - return (dpram_pbase + (uint)(addr - dpram_vbase)); -} -EXPORT_SYMBOL(cpm_dpram_phys); -#endif /* !CONFIG_PPC_CPM_NEW_BINDING */ - struct cpm_ioport16 { __be16 dir, par, odr_sor, dat, intr; __be16 res[3]; diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c index 7be711232124..5a6c5dfc53ef 100644 --- a/arch/powerpc/sysdev/cpm2.c +++ b/arch/powerpc/sysdev/cpm2.c @@ -46,10 +46,6 @@ #include <sysdev/fsl_soc.h> -#ifndef CONFIG_PPC_CPM_NEW_BINDING -static void cpm2_dpinit(void); -#endif - cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor space */ /* We allocate this here because it is used almost exclusively for @@ -71,15 +67,17 @@ void __init cpm2_reset(void) /* Reclaim the DP memory for our use. */ -#ifdef CONFIG_PPC_CPM_NEW_BINDING cpm_muram_init(); -#else - cpm2_dpinit(); -#endif /* Tell everyone where the comm processor resides. */ cpmp = &cpm2_immr->im_cpm; + +#ifndef CONFIG_PPC_EARLY_DEBUG_CPM + /* Reset the CPM. + */ + cpm_command(CPM_CR_RST, 0); +#endif } static DEFINE_SPINLOCK(cmd_lock); @@ -99,7 +97,7 @@ int cpm_command(u32 command, u8 opcode) if ((in_be32(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0) goto out; - printk(KERN_ERR "%s(): Not able to issue CPM command\n", __FUNCTION__); + printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__); ret = -EIO; out: spin_unlock_irqrestore(&cmd_lock, flags); @@ -240,6 +238,7 @@ int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode) case CPM_CLK_SCC1: reg = &im_cpmux->cmx_scr; shift = 24; + break; case CPM_CLK_SCC2: reg = &im_cpmux->cmx_scr; shift = 16; @@ -346,95 +345,6 @@ int cpm2_smc_clk_setup(enum cpm_clk_target target, int clock) return ret; } -#ifndef CONFIG_PPC_CPM_NEW_BINDING -/* - * dpalloc / dpfree bits. - */ -static spinlock_t cpm_dpmem_lock; -/* 16 blocks should be enough to satisfy all requests - * until the memory subsystem goes up... */ -static rh_block_t cpm_boot_dpmem_rh_block[16]; -static rh_info_t cpm_dpmem_info; -static u8 __iomem *im_dprambase; - -static void cpm2_dpinit(void) -{ - spin_lock_init(&cpm_dpmem_lock); - - /* initialize the info header */ - rh_init(&cpm_dpmem_info, 1, - sizeof(cpm_boot_dpmem_rh_block) / - sizeof(cpm_boot_dpmem_rh_block[0]), - cpm_boot_dpmem_rh_block); - - im_dprambase = cpm2_immr; - - /* Attach the usable dpmem area */ - /* XXX: This is actually crap. CPM_DATAONLY_BASE and - * CPM_DATAONLY_SIZE is only a subset of the available dpram. It - * varies with the processor and the microcode patches activated. - * But the following should be at least safe. - */ - rh_attach_region(&cpm_dpmem_info, CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE); -} - -/* This function returns an index into the DPRAM area. - */ -unsigned long cpm_dpalloc(uint size, uint align) -{ - unsigned long start; - unsigned long flags; - - spin_lock_irqsave(&cpm_dpmem_lock, flags); - cpm_dpmem_info.alignment = align; - start = rh_alloc(&cpm_dpmem_info, size, "commproc"); - spin_unlock_irqrestore(&cpm_dpmem_lock, flags); - - return (uint)start; -} -EXPORT_SYMBOL(cpm_dpalloc); - -int cpm_dpfree(unsigned long offset) -{ - int ret; - unsigned long flags; - - spin_lock_irqsave(&cpm_dpmem_lock, flags); - ret = rh_free(&cpm_dpmem_info, offset); - spin_unlock_irqrestore(&cpm_dpmem_lock, flags); - - return ret; -} -EXPORT_SYMBOL(cpm_dpfree); - -/* not sure if this is ever needed */ -unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align) -{ - unsigned long start; - unsigned long flags; - - spin_lock_irqsave(&cpm_dpmem_lock, flags); - cpm_dpmem_info.alignment = align; - start = rh_alloc_fixed(&cpm_dpmem_info, offset, size, "commproc"); - spin_unlock_irqrestore(&cpm_dpmem_lock, flags); - - return start; -} -EXPORT_SYMBOL(cpm_dpalloc_fixed); - -void cpm_dpdump(void) -{ - rh_dump(&cpm_dpmem_info); -} -EXPORT_SYMBOL(cpm_dpdump); - -void *cpm_dpram_addr(unsigned long offset) -{ - return (void *)(im_dprambase + offset); -} -EXPORT_SYMBOL(cpm_dpram_addr); -#endif /* !CONFIG_PPC_CPM_NEW_BINDING */ - struct cpm2_ioports { u32 dir, par, sor, odr, dat; u32 res[3]; diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c index 165981c87786..cb7df2dce44f 100644 --- a/arch/powerpc/sysdev/cpm_common.c +++ b/arch/powerpc/sysdev/cpm_common.c @@ -58,7 +58,6 @@ void __init udbg_init_cpm(void) } #endif -#ifdef CONFIG_PPC_CPM_NEW_BINDING static spinlock_t cpm_muram_lock; static rh_block_t cpm_boot_muram_rh_block[16]; static rh_info_t cpm_muram_info; @@ -199,5 +198,3 @@ dma_addr_t cpm_muram_dma(void __iomem *addr) return muram_pbase + ((u8 __iomem *)addr - muram_vbase); } EXPORT_SYMBOL(cpm_muram_dma); - -#endif /* CONFIG_PPC_CPM_NEW_BINDING */ diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c index e0e24b01e3a6..005c2ecf976f 100644 --- a/arch/powerpc/sysdev/dart_iommu.c +++ b/arch/powerpc/sysdev/dart_iommu.c @@ -37,6 +37,7 @@ #include <linux/dma-mapping.h> #include <linux/vmalloc.h> #include <linux/suspend.h> +#include <linux/lmb.h> #include <asm/io.h> #include <asm/prom.h> #include <asm/iommu.h> @@ -44,7 +45,6 @@ #include <asm/machdep.h> #include <asm/abs_addr.h> #include <asm/cacheflush.h> -#include <asm/lmb.h> #include <asm/ppc-pci.h> #include "dart.h" diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c new file mode 100644 index 000000000000..422c8faef593 --- /dev/null +++ b/arch/powerpc/sysdev/fsl_lbc.c @@ -0,0 +1,129 @@ +/* + * Freescale LBC and UPM routines. + * + * Copyright (c) 2007-2008 MontaVista Software, Inc. + * + * Author: Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/of.h> +#include <asm/fsl_lbc.h> + +spinlock_t fsl_lbc_lock = __SPIN_LOCK_UNLOCKED(fsl_lbc_lock); + +struct fsl_lbc_regs __iomem *fsl_lbc_regs; +EXPORT_SYMBOL(fsl_lbc_regs); + +static char __initdata *compat_lbc[] = { + "fsl,pq2-localbus", + "fsl,pq2pro-localbus", + "fsl,pq3-localbus", + "fsl,elbc", +}; + +static int __init fsl_lbc_init(void) +{ + struct device_node *lbus; + int i; + + for (i = 0; i < ARRAY_SIZE(compat_lbc); i++) { + lbus = of_find_compatible_node(NULL, NULL, compat_lbc[i]); + if (lbus) + goto found; + } + return -ENODEV; + +found: + fsl_lbc_regs = of_iomap(lbus, 0); + of_node_put(lbus); + if (!fsl_lbc_regs) + return -ENOMEM; + return 0; +} +arch_initcall(fsl_lbc_init); + +/** + * fsl_lbc_find - find Localbus bank + * @addr_base: base address of the memory bank + * + * This function walks LBC banks comparing "Base address" field of the BR + * registers with the supplied addr_base argument. When bases match this + * function returns bank number (starting with 0), otherwise it returns + * appropriate errno value. + */ +int fsl_lbc_find(phys_addr_t addr_base) +{ + int i; + + if (!fsl_lbc_regs) + return -ENODEV; + + for (i = 0; i < ARRAY_SIZE(fsl_lbc_regs->bank); i++) { + __be32 br = in_be32(&fsl_lbc_regs->bank[i].br); + __be32 or = in_be32(&fsl_lbc_regs->bank[i].or); + + if (br & BR_V && (br & or & BR_BA) == addr_base) + return i; + } + + return -ENOENT; +} +EXPORT_SYMBOL(fsl_lbc_find); + +/** + * fsl_upm_find - find pre-programmed UPM via base address + * @addr_base: base address of the memory bank controlled by the UPM + * @upm: pointer to the allocated fsl_upm structure + * + * This function fills fsl_upm structure so you can use it with the rest of + * UPM API. On success this function returns 0, otherwise it returns + * appropriate errno value. + */ +int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm) +{ + int bank; + __be32 br; + + bank = fsl_lbc_find(addr_base); + if (bank < 0) + return bank; + + br = in_be32(&fsl_lbc_regs->bank[bank].br); + + switch (br & BR_MSEL) { + case BR_MS_UPMA: + upm->mxmr = &fsl_lbc_regs->mamr; + break; + case BR_MS_UPMB: + upm->mxmr = &fsl_lbc_regs->mbmr; + break; + case BR_MS_UPMC: + upm->mxmr = &fsl_lbc_regs->mcmr; + break; + default: + return -EINVAL; + } + + switch (br & BR_PS) { + case BR_PS_8: + upm->width = 8; + break; + case BR_PS_16: + upm->width = 16; + break; + case BR_PS_32: + upm->width = 32; + break; + default: + return -EINVAL; + } + + return 0; +} +EXPORT_SYMBOL(fsl_upm_find); diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 2c5388ce902a..7b45670c7af3 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -75,6 +75,33 @@ phys_addr_t get_immrbase(void) EXPORT_SYMBOL(get_immrbase); +static u32 sysfreq = -1; + +u32 fsl_get_sys_freq(void) +{ + struct device_node *soc; + const u32 *prop; + int size; + + if (sysfreq != -1) + return sysfreq; + + soc = of_find_node_by_type(NULL, "soc"); + if (!soc) + return -1; + + prop = of_get_property(soc, "clock-frequency", &size); + if (!prop || size != sizeof(*prop) || *prop == 0) + prop = of_get_property(soc, "bus-frequency", &size); + + if (prop && size == sizeof(*prop)) + sysfreq = *prop; + + of_node_put(soc); + return sysfreq; +} +EXPORT_SYMBOL(fsl_get_sys_freq); + #if defined(CONFIG_CPM2) || defined(CONFIG_QUICC_ENGINE) || defined(CONFIG_8xx) static u32 brgfreq = -1; @@ -341,7 +368,7 @@ static int __init gfar_of_init(void) goto unreg; } - gfar_data.bus_id = 0; + snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "0"); gfar_data.phy_id = fixed_link[0]; } else { phy = of_find_node_by_phandle(*ph); @@ -362,7 +389,8 @@ static int __init gfar_of_init(void) } gfar_data.phy_id = *id; - gfar_data.bus_id = res.start; + snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "%x", + res.start); of_node_put(phy); of_node_put(mdio); @@ -516,9 +544,9 @@ arch_initcall(fsl_i2c_of_init); static int __init mpc83xx_wdt_init(void) { struct resource r; - struct device_node *soc, *np; + struct device_node *np; struct platform_device *dev; - const unsigned int *freq; + u32 freq = fsl_get_sys_freq(); int ret; np = of_find_compatible_node(NULL, "watchdog", "mpc83xx_wdt"); @@ -528,19 +556,6 @@ static int __init mpc83xx_wdt_init(void) goto nodev; } - soc = of_find_node_by_type(NULL, "soc"); - - if (!soc) { - ret = -ENODEV; - goto nosoc; - } - - freq = of_get_property(soc, "bus-frequency", NULL); - if (!freq) { - ret = -ENODEV; - goto err; - } - memset(&r, 0, sizeof(r)); ret = of_address_to_resource(np, 0, &r); @@ -553,20 +568,16 @@ static int __init mpc83xx_wdt_init(void) goto err; } - ret = platform_device_add_data(dev, freq, sizeof(int)); + ret = platform_device_add_data(dev, &freq, sizeof(freq)); if (ret) goto unreg; - of_node_put(soc); of_node_put(np); - return 0; unreg: platform_device_unregister(dev); err: - of_node_put(soc); -nosoc: of_node_put(np); nodev: return ret; @@ -735,547 +746,6 @@ err: arch_initcall(fsl_usb_of_init); -#ifndef CONFIG_PPC_CPM_NEW_BINDING -#ifdef CONFIG_CPM2 - -extern void init_scc_ioports(struct fs_uart_platform_info*); - -static const char fcc_regs[] = "fcc_regs"; -static const char fcc_regs_c[] = "fcc_regs_c"; -static const char fcc_pram[] = "fcc_pram"; -static char bus_id[9][BUS_ID_SIZE]; - -static int __init fs_enet_of_init(void) -{ - struct device_node *np; - unsigned int i; - struct platform_device *fs_enet_dev; - struct resource res; - int ret; - - for (np = NULL, i = 0; - (np = of_find_compatible_node(np, "network", "fs_enet")) != NULL; - i++) { - struct resource r[4]; - struct device_node *phy, *mdio; - struct fs_platform_info fs_enet_data; - const unsigned int *id, *phy_addr, *phy_irq; - const void *mac_addr; - const phandle *ph; - const char *model; - - memset(r, 0, sizeof(r)); - memset(&fs_enet_data, 0, sizeof(fs_enet_data)); - - ret = of_address_to_resource(np, 0, &r[0]); - if (ret) - goto err; - r[0].name = fcc_regs; - - ret = of_address_to_resource(np, 1, &r[1]); - if (ret) - goto err; - r[1].name = fcc_pram; - - ret = of_address_to_resource(np, 2, &r[2]); - if (ret) - goto err; - r[2].name = fcc_regs_c; - fs_enet_data.fcc_regs_c = r[2].start; - - of_irq_to_resource(np, 0, &r[3]); - - fs_enet_dev = - platform_device_register_simple("fsl-cpm-fcc", i, &r[0], 4); - - if (IS_ERR(fs_enet_dev)) { - ret = PTR_ERR(fs_enet_dev); - goto err; - } - - model = of_get_property(np, "model", NULL); - if (model == NULL) { - ret = -ENODEV; - goto unreg; - } - - mac_addr = of_get_mac_address(np); - if (mac_addr) - memcpy(fs_enet_data.macaddr, mac_addr, 6); - - ph = of_get_property(np, "phy-handle", NULL); - phy = of_find_node_by_phandle(*ph); - - if (phy == NULL) { - ret = -ENODEV; - goto unreg; - } - - phy_addr = of_get_property(phy, "reg", NULL); - fs_enet_data.phy_addr = *phy_addr; - - phy_irq = of_get_property(phy, "interrupts", NULL); - - id = of_get_property(np, "device-id", NULL); - fs_enet_data.fs_no = *id; - strcpy(fs_enet_data.fs_type, model); - - mdio = of_get_parent(phy); - ret = of_address_to_resource(mdio, 0, &res); - if (ret) { - of_node_put(phy); - of_node_put(mdio); - goto unreg; - } - - fs_enet_data.clk_rx = *((u32 *)of_get_property(np, - "rx-clock", NULL)); - fs_enet_data.clk_tx = *((u32 *)of_get_property(np, - "tx-clock", NULL)); - - if (strstr(model, "FCC")) { - int fcc_index = *id - 1; - const unsigned char *mdio_bb_prop; - - fs_enet_data.dpram_offset = (u32)cpm_dpram_addr(0); - fs_enet_data.rx_ring = 32; - fs_enet_data.tx_ring = 32; - fs_enet_data.rx_copybreak = 240; - fs_enet_data.use_napi = 0; - fs_enet_data.napi_weight = 17; - fs_enet_data.mem_offset = FCC_MEM_OFFSET(fcc_index); - fs_enet_data.cp_page = CPM_CR_FCC_PAGE(fcc_index); - fs_enet_data.cp_block = CPM_CR_FCC_SBLOCK(fcc_index); - - snprintf((char*)&bus_id[(*id)], BUS_ID_SIZE, "%x:%02x", - (u32)res.start, fs_enet_data.phy_addr); - fs_enet_data.bus_id = (char*)&bus_id[(*id)]; - fs_enet_data.init_ioports = init_fcc_ioports; - - mdio_bb_prop = of_get_property(phy, "bitbang", NULL); - if (mdio_bb_prop) { - struct platform_device *fs_enet_mdio_bb_dev; - struct fs_mii_bb_platform_info fs_enet_mdio_bb_data; - - fs_enet_mdio_bb_dev = - platform_device_register_simple("fsl-bb-mdio", - i, NULL, 0); - memset(&fs_enet_mdio_bb_data, 0, - sizeof(struct fs_mii_bb_platform_info)); - fs_enet_mdio_bb_data.mdio_dat.bit = - mdio_bb_prop[0]; - fs_enet_mdio_bb_data.mdio_dir.bit = - mdio_bb_prop[1]; - fs_enet_mdio_bb_data.mdc_dat.bit = - mdio_bb_prop[2]; - fs_enet_mdio_bb_data.mdio_port = - mdio_bb_prop[3]; - fs_enet_mdio_bb_data.mdc_port = - mdio_bb_prop[4]; - fs_enet_mdio_bb_data.delay = - mdio_bb_prop[5]; - - fs_enet_mdio_bb_data.irq[0] = phy_irq[0]; - fs_enet_mdio_bb_data.irq[1] = -1; - fs_enet_mdio_bb_data.irq[2] = -1; - fs_enet_mdio_bb_data.irq[3] = phy_irq[0]; - fs_enet_mdio_bb_data.irq[31] = -1; - - fs_enet_mdio_bb_data.mdio_dat.offset = - (u32)&cpm2_immr->im_ioport.iop_pdatc; - fs_enet_mdio_bb_data.mdio_dir.offset = - (u32)&cpm2_immr->im_ioport.iop_pdirc; - fs_enet_mdio_bb_data.mdc_dat.offset = - (u32)&cpm2_immr->im_ioport.iop_pdatc; - - ret = platform_device_add_data( - fs_enet_mdio_bb_dev, - &fs_enet_mdio_bb_data, - sizeof(struct fs_mii_bb_platform_info)); - if (ret) - goto unreg; - } - - of_node_put(phy); - of_node_put(mdio); - - ret = platform_device_add_data(fs_enet_dev, &fs_enet_data, - sizeof(struct - fs_platform_info)); - if (ret) - goto unreg; - } - } - return 0; - -unreg: - platform_device_unregister(fs_enet_dev); -err: - return ret; -} - -arch_initcall(fs_enet_of_init); - -static const char scc_regs[] = "regs"; -static const char scc_pram[] = "pram"; - -static int __init cpm_uart_of_init(void) -{ - struct device_node *np; - unsigned int i; - struct platform_device *cpm_uart_dev; - int ret; - - for (np = NULL, i = 0; - (np = of_find_compatible_node(np, "serial", "cpm_uart")) != NULL; - i++) { - struct resource r[3]; - struct fs_uart_platform_info cpm_uart_data; - const int *id; - const char *model; - - memset(r, 0, sizeof(r)); - memset(&cpm_uart_data, 0, sizeof(cpm_uart_data)); - - ret = of_address_to_resource(np, 0, &r[0]); - if (ret) - goto err; - - r[0].name = scc_regs; - - ret = of_address_to_resource(np, 1, &r[1]); - if (ret) - goto err; - r[1].name = scc_pram; - - of_irq_to_resource(np, 0, &r[2]); - - cpm_uart_dev = - platform_device_register_simple("fsl-cpm-scc:uart", i, &r[0], 3); - - if (IS_ERR(cpm_uart_dev)) { - ret = PTR_ERR(cpm_uart_dev); - goto err; - } - - id = of_get_property(np, "device-id", NULL); - cpm_uart_data.fs_no = *id; - - model = of_get_property(np, "model", NULL); - strcpy(cpm_uart_data.fs_type, model); - - cpm_uart_data.uart_clk = ppc_proc_freq; - - cpm_uart_data.tx_num_fifo = 4; - cpm_uart_data.tx_buf_size = 32; - cpm_uart_data.rx_num_fifo = 4; - cpm_uart_data.rx_buf_size = 32; - cpm_uart_data.clk_rx = *((u32 *)of_get_property(np, - "rx-clock", NULL)); - cpm_uart_data.clk_tx = *((u32 *)of_get_property(np, - "tx-clock", NULL)); - - ret = - platform_device_add_data(cpm_uart_dev, &cpm_uart_data, - sizeof(struct - fs_uart_platform_info)); - if (ret) - goto unreg; - } - - return 0; - -unreg: - platform_device_unregister(cpm_uart_dev); -err: - return ret; -} - -arch_initcall(cpm_uart_of_init); -#endif /* CONFIG_CPM2 */ - -#ifdef CONFIG_8xx - -extern void init_scc_ioports(struct fs_platform_info*); -extern int platform_device_skip(const char *model, int id); - -static int __init fs_enet_mdio_of_init(void) -{ - struct device_node *np; - unsigned int i; - struct platform_device *mdio_dev; - struct resource res; - int ret; - - for (np = NULL, i = 0; - (np = of_find_compatible_node(np, "mdio", "fs_enet")) != NULL; - i++) { - struct fs_mii_fec_platform_info mdio_data; - - memset(&res, 0, sizeof(res)); - memset(&mdio_data, 0, sizeof(mdio_data)); - - ret = of_address_to_resource(np, 0, &res); - if (ret) - goto err; - - mdio_dev = - platform_device_register_simple("fsl-cpm-fec-mdio", - res.start, &res, 1); - if (IS_ERR(mdio_dev)) { - ret = PTR_ERR(mdio_dev); - goto err; - } - - mdio_data.mii_speed = ((((ppc_proc_freq + 4999999) / 2500000) / 2) & 0x3F) << 1; - - ret = - platform_device_add_data(mdio_dev, &mdio_data, - sizeof(struct fs_mii_fec_platform_info)); - if (ret) - goto unreg; - } - return 0; - -unreg: - platform_device_unregister(mdio_dev); -err: - return ret; -} - -arch_initcall(fs_enet_mdio_of_init); - -static const char *enet_regs = "regs"; -static const char *enet_pram = "pram"; -static const char *enet_irq = "interrupt"; -static char bus_id[9][BUS_ID_SIZE]; - -static int __init fs_enet_of_init(void) -{ - struct device_node *np; - unsigned int i; - struct platform_device *fs_enet_dev = NULL; - struct resource res; - int ret; - - for (np = NULL, i = 0; - (np = of_find_compatible_node(np, "network", "fs_enet")) != NULL; - i++) { - struct resource r[4]; - struct device_node *phy = NULL, *mdio = NULL; - struct fs_platform_info fs_enet_data; - const unsigned int *id; - const unsigned int *phy_addr; - const void *mac_addr; - const phandle *ph; - const char *model; - - memset(r, 0, sizeof(r)); - memset(&fs_enet_data, 0, sizeof(fs_enet_data)); - - model = of_get_property(np, "model", NULL); - if (model == NULL) { - ret = -ENODEV; - goto unreg; - } - - id = of_get_property(np, "device-id", NULL); - fs_enet_data.fs_no = *id; - - if (platform_device_skip(model, *id)) - continue; - - ret = of_address_to_resource(np, 0, &r[0]); - if (ret) - goto err; - r[0].name = enet_regs; - - mac_addr = of_get_mac_address(np); - if (mac_addr) - memcpy(fs_enet_data.macaddr, mac_addr, 6); - - ph = of_get_property(np, "phy-handle", NULL); - if (ph != NULL) - phy = of_find_node_by_phandle(*ph); - - if (phy != NULL) { - phy_addr = of_get_property(phy, "reg", NULL); - fs_enet_data.phy_addr = *phy_addr; - fs_enet_data.has_phy = 1; - - mdio = of_get_parent(phy); - ret = of_address_to_resource(mdio, 0, &res); - if (ret) { - of_node_put(phy); - of_node_put(mdio); - goto unreg; - } - } - - model = of_get_property(np, "model", NULL); - strcpy(fs_enet_data.fs_type, model); - - if (strstr(model, "FEC")) { - r[1].start = r[1].end = irq_of_parse_and_map(np, 0); - r[1].flags = IORESOURCE_IRQ; - r[1].name = enet_irq; - - fs_enet_dev = - platform_device_register_simple("fsl-cpm-fec", i, &r[0], 2); - - if (IS_ERR(fs_enet_dev)) { - ret = PTR_ERR(fs_enet_dev); - goto err; - } - - fs_enet_data.rx_ring = 128; - fs_enet_data.tx_ring = 16; - fs_enet_data.rx_copybreak = 240; - fs_enet_data.use_napi = 1; - fs_enet_data.napi_weight = 17; - - snprintf((char*)&bus_id[i], BUS_ID_SIZE, "%x:%02x", - (u32)res.start, fs_enet_data.phy_addr); - fs_enet_data.bus_id = (char*)&bus_id[i]; - fs_enet_data.init_ioports = init_fec_ioports; - } - if (strstr(model, "SCC")) { - ret = of_address_to_resource(np, 1, &r[1]); - if (ret) - goto err; - r[1].name = enet_pram; - - r[2].start = r[2].end = irq_of_parse_and_map(np, 0); - r[2].flags = IORESOURCE_IRQ; - r[2].name = enet_irq; - - fs_enet_dev = - platform_device_register_simple("fsl-cpm-scc", i, &r[0], 3); - - if (IS_ERR(fs_enet_dev)) { - ret = PTR_ERR(fs_enet_dev); - goto err; - } - - fs_enet_data.rx_ring = 64; - fs_enet_data.tx_ring = 8; - fs_enet_data.rx_copybreak = 240; - fs_enet_data.use_napi = 1; - fs_enet_data.napi_weight = 17; - - snprintf((char*)&bus_id[i], BUS_ID_SIZE, "%s", "fixed@10:1"); - fs_enet_data.bus_id = (char*)&bus_id[i]; - fs_enet_data.init_ioports = init_scc_ioports; - } - - of_node_put(phy); - of_node_put(mdio); - - ret = platform_device_add_data(fs_enet_dev, &fs_enet_data, - sizeof(struct - fs_platform_info)); - if (ret) - goto unreg; - } - return 0; - -unreg: - platform_device_unregister(fs_enet_dev); -err: - return ret; -} - -arch_initcall(fs_enet_of_init); - -static int __init fsl_pcmcia_of_init(void) -{ - struct device_node *np; - /* - * Register all the devices which type is "pcmcia" - */ - for_each_compatible_node(np, "pcmcia", "fsl,pq-pcmcia") - of_platform_device_create(np, "m8xx-pcmcia", NULL); - return 0; -} - -arch_initcall(fsl_pcmcia_of_init); - -static const char *smc_regs = "regs"; -static const char *smc_pram = "pram"; - -static int __init cpm_smc_uart_of_init(void) -{ - struct device_node *np; - unsigned int i; - struct platform_device *cpm_uart_dev; - int ret; - - for (np = NULL, i = 0; - (np = of_find_compatible_node(np, "serial", "cpm_uart")) != NULL; - i++) { - struct resource r[3]; - struct fs_uart_platform_info cpm_uart_data; - const int *id; - const char *model; - - memset(r, 0, sizeof(r)); - memset(&cpm_uart_data, 0, sizeof(cpm_uart_data)); - - ret = of_address_to_resource(np, 0, &r[0]); - if (ret) - goto err; - - r[0].name = smc_regs; - - ret = of_address_to_resource(np, 1, &r[1]); - if (ret) - goto err; - r[1].name = smc_pram; - - r[2].start = r[2].end = irq_of_parse_and_map(np, 0); - r[2].flags = IORESOURCE_IRQ; - - cpm_uart_dev = - platform_device_register_simple("fsl-cpm-smc:uart", i, &r[0], 3); - - if (IS_ERR(cpm_uart_dev)) { - ret = PTR_ERR(cpm_uart_dev); - goto err; - } - - model = of_get_property(np, "model", NULL); - strcpy(cpm_uart_data.fs_type, model); - - id = of_get_property(np, "device-id", NULL); - cpm_uart_data.fs_no = *id; - cpm_uart_data.uart_clk = ppc_proc_freq; - - cpm_uart_data.tx_num_fifo = 4; - cpm_uart_data.tx_buf_size = 32; - cpm_uart_data.rx_num_fifo = 4; - cpm_uart_data.rx_buf_size = 32; - - ret = - platform_device_add_data(cpm_uart_dev, &cpm_uart_data, - sizeof(struct - fs_uart_platform_info)); - if (ret) - goto unreg; - } - - return 0; - -unreg: - platform_device_unregister(cpm_uart_dev); -err: - return ret; -} - -arch_initcall(cpm_smc_uart_of_init); - -#endif /* CONFIG_8xx */ -#endif /* CONFIG_PPC_CPM_NEW_BINDING */ - static int __init of_fsl_spi_probe(char *type, char *compatible, u32 sysclk, struct spi_board_info *board_infos, unsigned int num_board_infos, @@ -1371,25 +841,9 @@ int __init fsl_spi_init(struct spi_board_info *board_infos, sysclk = get_brgfreq(); #endif if (sysclk == -1) { - struct device_node *np; - const u32 *freq; - int size; - - np = of_find_node_by_type(NULL, "soc"); - if (!np) + sysclk = fsl_get_sys_freq(); + if (sysclk == -1) return -ENODEV; - - freq = of_get_property(np, "clock-frequency", &size); - if (!freq || size != sizeof(*freq) || *freq == 0) { - freq = of_get_property(np, "bus-frequency", &size); - if (!freq || size != sizeof(*freq) || *freq == 0) { - of_node_put(np); - return -ENODEV; - } - } - - sysclk = *freq; - of_node_put(np); } ret = of_fsl_spi_probe(NULL, "fsl,spi", sysclk, board_infos, @@ -1438,3 +892,44 @@ void fsl_rstcr_restart(char *cmd) while (1) ; } #endif + +#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) +struct platform_diu_data_ops diu_ops = { + .diu_size = 1280 * 1024 * 4, /* default one 1280x1024 buffer */ +}; +EXPORT_SYMBOL(diu_ops); + +int __init preallocate_diu_videomemory(void) +{ + pr_debug("diu_size=%lu\n", diu_ops.diu_size); + + diu_ops.diu_mem = __alloc_bootmem(diu_ops.diu_size, 8, 0); + if (!diu_ops.diu_mem) { + printk(KERN_ERR "fsl-diu: cannot allocate %lu bytes\n", + diu_ops.diu_size); + return -ENOMEM; + } + + pr_debug("diu_mem=%p\n", diu_ops.diu_mem); + + rh_init(&diu_ops.diu_rh_info, 4096, ARRAY_SIZE(diu_ops.diu_rh_block), + diu_ops.diu_rh_block); + return rh_attach_region(&diu_ops.diu_rh_info, + (unsigned long) diu_ops.diu_mem, + diu_ops.diu_size); +} + +static int __init early_parse_diufb(char *p) +{ + if (!p) + return 1; + + diu_ops.diu_size = _ALIGN_UP(memparse(p, &p), 8); + + pr_debug("diu_size=%lu\n", diu_ops.diu_size); + + return 0; +} +early_param("diufb", early_parse_diufb); + +#endif diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h index 63e7db30a4cd..52c831fa1886 100644 --- a/arch/powerpc/sysdev/fsl_soc.h +++ b/arch/powerpc/sysdev/fsl_soc.h @@ -7,6 +7,7 @@ extern phys_addr_t get_immrbase(void); extern u32 get_brgfreq(void); extern u32 get_baudrate(void); +extern u32 fsl_get_sys_freq(void); struct spi_board_info; @@ -16,5 +17,28 @@ extern int fsl_spi_init(struct spi_board_info *board_infos, void (*deactivate_cs)(u8 cs, u8 polarity)); extern void fsl_rstcr_restart(char *cmd); + +#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) +#include <linux/bootmem.h> +#include <asm/rheap.h> +struct platform_diu_data_ops { + rh_block_t diu_rh_block[16]; + rh_info_t diu_rh_info; + unsigned long diu_size; + void *diu_mem; + + unsigned int (*get_pixel_format) (unsigned int bits_per_pixel, + int monitor_port); + void (*set_gamma_table) (int monitor_port, char *gamma_table_base); + void (*set_monitor_port) (int monitor_port); + void (*set_pixel_clock) (unsigned int pixclock); + ssize_t (*show_monitor_port) (int monitor_port, char *buf); + int (*set_sysfs_monitor_port) (int val); +}; + +extern struct platform_diu_data_ops diu_ops; +int __init preallocate_diu_videomemory(void); +#endif + #endif #endif diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c index ae0dbf4c1d66..0f2dfb0aaa6a 100644 --- a/arch/powerpc/sysdev/ipic.c +++ b/arch/powerpc/sysdev/ipic.c @@ -906,7 +906,7 @@ static int __init init_ipic_sysfs(void) { int rc; - if (!primary_ipic->regs) + if (!primary_ipic || !primary_ipic->regs) return -ENODEV; printk(KERN_DEBUG "Registering ipic with sysfs...\n"); diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 6ffdda244bb1..8619f2a3f1f6 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -175,13 +175,16 @@ static inline void _mpic_write(enum mpic_reg_type type, switch(type) { #ifdef CONFIG_PPC_DCR case mpic_access_dcr: - return dcr_write(rb->dhost, reg, value); + dcr_write(rb->dhost, reg, value); + break; #endif case mpic_access_mmio_be: - return out_be32(rb->base + (reg >> 2), value); + out_be32(rb->base + (reg >> 2), value); + break; case mpic_access_mmio_le: default: - return out_le32(rb->base + (reg >> 2), value); + out_le32(rb->base + (reg >> 2), value); + break; } } @@ -1000,7 +1003,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, const char *name) { struct mpic *mpic; - u32 reg; + u32 greg_feature; const char *vers; int i; int intvec_top; @@ -1064,7 +1067,8 @@ struct mpic * __init mpic_alloc(struct device_node *node, /* Look for protected sources */ if (node) { - unsigned int psize, bits, mapsize; + int psize; + unsigned int bits, mapsize; const u32 *psrc = of_get_property(node, "protected-sources", &psize); if (psrc) { @@ -1107,8 +1111,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, * in, try to obtain one */ if (paddr == 0 && !(mpic->flags & MPIC_USES_DCR)) { - const u32 *reg; - reg = of_get_property(node, "reg", NULL); + const u32 *reg = of_get_property(node, "reg", NULL); BUG_ON(reg == NULL); paddr = of_translate_address(node, reg); BUG_ON(paddr == OF_BAD_ADDR); @@ -1137,12 +1140,13 @@ struct mpic * __init mpic_alloc(struct device_node *node, * MPICs, num sources as well. On ISU MPICs, sources are counted * as ISUs are added */ - reg = mpic_read(mpic->gregs, MPIC_INFO(GREG_FEATURE_0)); - mpic->num_cpus = ((reg & MPIC_GREG_FEATURE_LAST_CPU_MASK) + greg_feature = mpic_read(mpic->gregs, MPIC_INFO(GREG_FEATURE_0)); + mpic->num_cpus = ((greg_feature & MPIC_GREG_FEATURE_LAST_CPU_MASK) >> MPIC_GREG_FEATURE_LAST_CPU_SHIFT) + 1; if (isu_size == 0) - mpic->num_sources = ((reg & MPIC_GREG_FEATURE_LAST_SRC_MASK) - >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT) + 1; + mpic->num_sources = + ((greg_feature & MPIC_GREG_FEATURE_LAST_SRC_MASK) + >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT) + 1; /* Map the per-CPU registers */ for (i = 0; i < mpic->num_cpus; i++) { @@ -1161,7 +1165,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, mpic->isu_mask = (1 << mpic->isu_shift) - 1; /* Display version */ - switch (reg & MPIC_GREG_FEATURE_VERSION_MASK) { + switch (greg_feature & MPIC_GREG_FEATURE_VERSION_MASK) { case 1: vers = "1.0"; break; @@ -1321,7 +1325,7 @@ void __init mpic_set_serial_int(struct mpic *mpic, int enable) void mpic_irq_set_priority(unsigned int irq, unsigned int pri) { - int is_ipi; + unsigned int is_ipi; struct mpic *mpic = mpic_find(irq, &is_ipi); unsigned int src = mpic_irq_to_hw(irq); unsigned long flags; @@ -1344,7 +1348,7 @@ void mpic_irq_set_priority(unsigned int irq, unsigned int pri) unsigned int mpic_irq_get_priority(unsigned int irq) { - int is_ipi; + unsigned int is_ipi; struct mpic *mpic = mpic_find(irq, &is_ipi); unsigned int src = mpic_irq_to_hw(irq); unsigned long flags; @@ -1406,11 +1410,6 @@ void mpic_cpu_set_priority(int prio) mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), prio); } -/* - * XXX: someone who knows mpic should check this. - * do we need to eoi the ipi including for kexec cpu here (see xics comments)? - * or can we reset the mpic in the new kernel? - */ void mpic_teardown_this_cpu(int secondary) { struct mpic *mpic = mpic_primary; @@ -1430,6 +1429,10 @@ void mpic_teardown_this_cpu(int secondary) /* Set current processor priority to max */ mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0xf); + /* We need to EOI the IPI since not all platforms reset the MPIC + * on boot and new interrupts wouldn't get delivered otherwise. + */ + mpic_eoi(mpic); spin_unlock_irqrestore(&mpic_lock, flags); } diff --git a/arch/powerpc/sysdev/mv64x60_dev.c b/arch/powerpc/sysdev/mv64x60_dev.c index efda0028909d..41af1223e2a0 100644 --- a/arch/powerpc/sysdev/mv64x60_dev.c +++ b/arch/powerpc/sysdev/mv64x60_dev.c @@ -127,7 +127,7 @@ static int __init mv64x60_mpsc_device_setup(struct device_node *np, int id) if (err) return err; - prop = of_get_property(np, "block-index", NULL); + prop = of_get_property(np, "cell-index", NULL); if (!prop) return -ENODEV; port_number = *(int *)prop; @@ -136,6 +136,7 @@ static int __init mv64x60_mpsc_device_setup(struct device_node *np, int id) pdata.cache_mgmt = 1; /* All current revs need this set */ + pdata.max_idle = 40; /* default */ prop = of_get_property(np, "max_idle", NULL); if (prop) pdata.max_idle = *prop; @@ -205,30 +206,24 @@ error: /* * Create mv64x60_eth platform devices */ -static int __init eth_register_shared_pdev(struct device_node *np) +static struct platform_device * __init mv64x60_eth_register_shared_pdev( + struct device_node *np, int id) { struct platform_device *pdev; struct resource r[1]; int err; - np = of_get_parent(np); - if (!np) - return -ENODEV; - err = of_address_to_resource(np, 0, &r[0]); - of_node_put(np); if (err) - return err; + return ERR_PTR(err); - pdev = platform_device_register_simple(MV643XX_ETH_SHARED_NAME, 0, + pdev = platform_device_register_simple(MV643XX_ETH_SHARED_NAME, id, r, 1); - if (IS_ERR(pdev)) - return PTR_ERR(pdev); - - return 0; + return pdev; } -static int __init mv64x60_eth_device_setup(struct device_node *np, int id) +static int __init mv64x60_eth_device_setup(struct device_node *np, int id, + struct platform_device *shared_pdev) { struct resource r[1]; struct mv643xx_eth_platform_data pdata; @@ -239,16 +234,12 @@ static int __init mv64x60_eth_device_setup(struct device_node *np, int id) const phandle *ph; int err; - /* only register the shared platform device the first time through */ - if (id == 0 && (err = eth_register_shared_pdev(np))) - return err; - memset(r, 0, sizeof(r)); of_irq_to_resource(np, 0, &r[0]); memset(&pdata, 0, sizeof(pdata)); - prop = of_get_property(np, "block-index", NULL); + prop = of_get_property(np, "reg", NULL); if (!prop) return -ENODEV; pdata.port_number = *prop; @@ -301,7 +292,7 @@ static int __init mv64x60_eth_device_setup(struct device_node *np, int id) of_node_put(phy); - pdev = platform_device_alloc(MV643XX_ETH_NAME, pdata.port_number); + pdev = platform_device_alloc(MV643XX_ETH_NAME, id); if (!pdev) return -ENOMEM; @@ -345,21 +336,17 @@ static int __init mv64x60_i2c_device_setup(struct device_node *np, int id) memset(&pdata, 0, sizeof(pdata)); + pdata.freq_m = 8; /* default */ prop = of_get_property(np, "freq_m", NULL); - if (!prop) - return -ENODEV; - pdata.freq_m = *prop; + if (prop) + pdata.freq_m = *prop; + pdata.freq_m = 3; /* default */ prop = of_get_property(np, "freq_n", NULL); - if (!prop) - return -ENODEV; - pdata.freq_n = *prop; - - prop = of_get_property(np, "timeout", NULL); if (prop) - pdata.timeout = *prop; - else - pdata.timeout = 1000; /* 1 second */ + pdata.freq_n = *prop; + + pdata.timeout = 1000; /* default: 1 second */ pdev = platform_device_alloc(MV64XXX_I2C_CTLR_NAME, id); if (!pdev) @@ -401,10 +388,7 @@ static int __init mv64x60_wdt_device_setup(struct device_node *np, int id) memset(&pdata, 0, sizeof(pdata)); - prop = of_get_property(np, "timeout", NULL); - if (!prop) - return -ENODEV; - pdata.timeout = *prop; + pdata.timeout = 10; /* Default: 10 seconds */ np = of_get_parent(np); if (!np) @@ -441,38 +425,64 @@ error: static int __init mv64x60_device_setup(void) { - struct device_node *np = NULL; - int id; + struct device_node *np, *np2; + struct platform_device *pdev; + int id, id2; int err; id = 0; - for_each_compatible_node(np, "serial", "marvell,mpsc") - if ((err = mv64x60_mpsc_device_setup(np, id++))) - goto error; + for_each_compatible_node(np, "serial", "marvell,mv64360-mpsc") { + err = mv64x60_mpsc_device_setup(np, id++); + if (err) + printk(KERN_ERR "Failed to initialize MV64x60 " + "serial device %s: error %d.\n", + np->full_name, err); + } id = 0; - for_each_compatible_node(np, "network", "marvell,mv64x60-eth") - if ((err = mv64x60_eth_device_setup(np, id++))) - goto error; + id2 = 0; + for_each_compatible_node(np, NULL, "marvell,mv64360-eth-group") { + pdev = mv64x60_eth_register_shared_pdev(np, id++); + if (IS_ERR(pdev)) { + err = PTR_ERR(pdev); + printk(KERN_ERR "Failed to initialize MV64x60 " + "network block %s: error %d.\n", + np->full_name, err); + continue; + } + for_each_child_of_node(np, np2) { + if (!of_device_is_compatible(np2, + "marvell,mv64360-eth")) + continue; + err = mv64x60_eth_device_setup(np2, id2++, pdev); + if (err) + printk(KERN_ERR "Failed to initialize " + "MV64x60 network device %s: " + "error %d.\n", + np2->full_name, err); + } + } id = 0; - for_each_compatible_node(np, "i2c", "marvell,mv64x60-i2c") - if ((err = mv64x60_i2c_device_setup(np, id++))) - goto error; + for_each_compatible_node(np, "i2c", "marvell,mv64360-i2c") { + err = mv64x60_i2c_device_setup(np, id++); + if (err) + printk(KERN_ERR "Failed to initialize MV64x60 I2C " + "bus %s: error %d.\n", + np->full_name, err); + } /* support up to one watchdog timer */ - np = of_find_compatible_node(np, NULL, "marvell,mv64x60-wdt"); + np = of_find_compatible_node(np, NULL, "marvell,mv64360-wdt"); if (np) { if ((err = mv64x60_wdt_device_setup(np, id))) - goto error; + printk(KERN_ERR "Failed to initialize MV64x60 " + "Watchdog %s: error %d.\n", + np->full_name, err); of_node_put(np); } return 0; - -error: - of_node_put(np); - return err; } arch_initcall(mv64x60_device_setup); @@ -489,10 +499,10 @@ static int __init mv64x60_add_mpsc_console(void) if (!np) goto not_mpsc; - if (!of_device_is_compatible(np, "marvell,mpsc")) + if (!of_device_is_compatible(np, "marvell,mv64360-mpsc")) goto not_mpsc; - prop = of_get_property(np, "block-index", NULL); + prop = of_get_property(np, "cell-index", NULL); if (!prop) goto not_mpsc; diff --git a/arch/powerpc/sysdev/mv64x60_pci.c b/arch/powerpc/sysdev/mv64x60_pci.c index d21ab8fa4993..1456015a22d8 100644 --- a/arch/powerpc/sysdev/mv64x60_pci.c +++ b/arch/powerpc/sysdev/mv64x60_pci.c @@ -86,14 +86,14 @@ static int __init mv64x60_sysfs_init(void) struct platform_device *pdev; const unsigned int *prop; - np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60"); + np = of_find_compatible_node(NULL, NULL, "marvell,mv64360"); if (!np) return 0; prop = of_get_property(np, "hs_reg_valid", NULL); of_node_put(np); - pdev = platform_device_register_simple("marvell,mv64x60", 0, NULL, 0); + pdev = platform_device_register_simple("marvell,mv64360", 0, NULL, 0); if (IS_ERR(pdev)) return PTR_ERR(pdev); @@ -166,6 +166,6 @@ void __init mv64x60_pci_init(void) { struct device_node *np; - for_each_compatible_node(np, "pci", "marvell,mv64x60-pci") + for_each_compatible_node(np, "pci", "marvell,mv64360-pci") mv64x60_add_bridge(np); } diff --git a/arch/powerpc/sysdev/mv64x60_pic.c b/arch/powerpc/sysdev/mv64x60_pic.c index 19e6ef263797..2aa4ed066db1 100644 --- a/arch/powerpc/sysdev/mv64x60_pic.c +++ b/arch/powerpc/sysdev/mv64x60_pic.c @@ -238,13 +238,13 @@ void __init mv64x60_init_irq(void) const unsigned int *reg; unsigned long flags; - np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-gpp"); + np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-gpp"); reg = of_get_property(np, "reg", &size); paddr = of_translate_address(np, reg); mv64x60_gpp_reg_base = ioremap(paddr, reg[1]); of_node_put(np); - np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-pic"); + np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-pic"); reg = of_get_property(np, "reg", &size); paddr = of_translate_address(np, reg); mv64x60_irq_reg_base = ioremap(paddr, reg[1]); diff --git a/arch/powerpc/sysdev/mv64x60_udbg.c b/arch/powerpc/sysdev/mv64x60_udbg.c index 35c77c7d0616..2792dc8b038c 100644 --- a/arch/powerpc/sysdev/mv64x60_udbg.c +++ b/arch/powerpc/sysdev/mv64x60_udbg.c @@ -85,7 +85,7 @@ static void mv64x60_udbg_init(void) if (!stdout) return; - for_each_compatible_node(np, "serial", "marvell,mpsc") { + for_each_compatible_node(np, "serial", "marvell,mv64360-mpsc") { if (np == stdout) break; } @@ -94,7 +94,7 @@ static void mv64x60_udbg_init(void) if (!np) return; - block_index = of_get_property(np, "block-index", NULL); + block_index = of_get_property(np, "cell-index", NULL); if (!block_index) goto error; diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c index 5abfcd157483..1814adbd2236 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.c +++ b/arch/powerpc/sysdev/ppc4xx_pci.c @@ -527,6 +527,7 @@ static void __init ppc4xx_probe_pcix_bridge(struct device_node *np) * * ibm,plb-pciex-440spe * ibm,plb-pciex-405ex + * ibm,plb-pciex-460ex * * Anything else will be rejected for now as they are all subtly * different unfortunately. @@ -645,7 +646,7 @@ static int __init ppc440spe_pciex_core_init(struct device_node *np) int time_out = 20; /* Set PLL clock receiver to LVPECL */ - mtdcri(SDR0, PESDR0_PLLLCT1, mfdcri(SDR0, PESDR0_PLLLCT1) | 1 << 28); + dcri_clrset(SDR0, PESDR0_PLLLCT1, 0, 1 << 28); /* Shouldn't we do all the calibration stuff etc... here ? */ if (ppc440spe_pciex_check_reset(np)) @@ -659,8 +660,7 @@ static int __init ppc440spe_pciex_core_init(struct device_node *np) } /* De-assert reset of PCIe PLL, wait for lock */ - mtdcri(SDR0, PESDR0_PLLLCT1, - mfdcri(SDR0, PESDR0_PLLLCT1) & ~(1 << 24)); + dcri_clrset(SDR0, PESDR0_PLLLCT1, 1 << 24, 0); udelay(3); while (time_out) { @@ -712,9 +712,8 @@ static int ppc440spe_pciex_init_port_hw(struct ppc4xx_pciex_port *port) mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL7SET1, 0x35000000); } - val = mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET); - mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, - (val & ~(1 << 24 | 1 << 16)) | 1 << 12); + dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET, + (1 << 24) | (1 << 16), 1 << 12); return 0; } @@ -775,6 +774,115 @@ static struct ppc4xx_pciex_hwops ppc440speB_pcie_hwops __initdata = .setup_utl = ppc440speB_pciex_init_utl, }; +static int __init ppc460ex_pciex_core_init(struct device_node *np) +{ + /* Nothing to do, return 2 ports */ + return 2; +} + +static int ppc460ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port) +{ + u32 val; + u32 utlset1; + + if (port->endpoint) + val = PTYPE_LEGACY_ENDPOINT << 20; + else + val = PTYPE_ROOT_PORT << 20; + + if (port->index == 0) { + val |= LNKW_X1 << 12; + utlset1 = 0x20000000; + } else { + val |= LNKW_X4 << 12; + utlset1 = 0x20101101; + } + + mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET, val); + mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, utlset1); + mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x01210000); + + switch (port->index) { + case 0: + mtdcri(SDR0, PESDR0_460EX_L0CDRCTL, 0x00003230); + mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000136); + mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006); + + mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST,0x10000000); + break; + + case 1: + mtdcri(SDR0, PESDR1_460EX_L0CDRCTL, 0x00003230); + mtdcri(SDR0, PESDR1_460EX_L1CDRCTL, 0x00003230); + mtdcri(SDR0, PESDR1_460EX_L2CDRCTL, 0x00003230); + mtdcri(SDR0, PESDR1_460EX_L3CDRCTL, 0x00003230); + mtdcri(SDR0, PESDR1_460EX_L0DRV, 0x00000136); + mtdcri(SDR0, PESDR1_460EX_L1DRV, 0x00000136); + mtdcri(SDR0, PESDR1_460EX_L2DRV, 0x00000136); + mtdcri(SDR0, PESDR1_460EX_L3DRV, 0x00000136); + mtdcri(SDR0, PESDR1_460EX_L0CLK, 0x00000006); + mtdcri(SDR0, PESDR1_460EX_L1CLK, 0x00000006); + mtdcri(SDR0, PESDR1_460EX_L2CLK, 0x00000006); + mtdcri(SDR0, PESDR1_460EX_L3CLK, 0x00000006); + + mtdcri(SDR0, PESDR1_460EX_PHY_CTL_RST,0x10000000); + break; + } + + mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, + mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) | + (PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTPYN)); + + /* Poll for PHY reset */ + /* XXX FIXME add timeout */ + switch (port->index) { + case 0: + while (!(mfdcri(SDR0, PESDR0_460EX_RSTSTA) & 0x1)) + udelay(10); + break; + case 1: + while (!(mfdcri(SDR0, PESDR1_460EX_RSTSTA) & 0x1)) + udelay(10); + break; + } + + mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, + (mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) & + ~(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL)) | + PESDRx_RCSSET_RSTPYN); + + port->has_ibpre = 1; + + return 0; +} + +static int ppc460ex_pciex_init_utl(struct ppc4xx_pciex_port *port) +{ + dcr_write(port->dcrs, DCRO_PEGPL_SPECIAL, 0x0); + + /* + * Set buffer allocations and then assert VRB and TXE. + */ + out_be32(port->utl_base + PEUTL_PBCTL, 0x0800000c); + out_be32(port->utl_base + PEUTL_OUTTR, 0x08000000); + out_be32(port->utl_base + PEUTL_INTR, 0x02000000); + out_be32(port->utl_base + PEUTL_OPDBSZ, 0x04000000); + out_be32(port->utl_base + PEUTL_PBBSZ, 0x00000000); + out_be32(port->utl_base + PEUTL_IPHBSZ, 0x02000000); + out_be32(port->utl_base + PEUTL_IPDBSZ, 0x04000000); + out_be32(port->utl_base + PEUTL_RCIRQEN,0x00f00000); + out_be32(port->utl_base + PEUTL_PCTL, 0x80800066); + + return 0; +} + +static struct ppc4xx_pciex_hwops ppc460ex_pcie_hwops __initdata = +{ + .core_init = ppc460ex_pciex_core_init, + .port_init_hw = ppc460ex_pciex_init_port_hw, + .setup_utl = ppc460ex_pciex_init_utl, +}; + #endif /* CONFIG_44x */ #ifdef CONFIG_40x @@ -830,17 +938,9 @@ static int ppc405ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port) * PCIe boards don't show this problem. * This has to be re-tested and fixed in a later release! */ -#if 0 /* XXX FIXME: Not resetting the PHY will leave all resources - * configured as done previously by U-Boot. Then Linux will currently - * not reassign them. So the PHY reset is now done always. This will - * lead to problems with the Atheros PCIe board again. - */ val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP); if (!(val & 0x00001000)) ppc405ex_pcie_phy_reset(port); -#else - ppc405ex_pcie_phy_reset(port); -#endif dcr_write(port->dcrs, DCRO_PEGPL_CFG, 0x10000000); /* guarded on */ @@ -896,6 +996,8 @@ static int __init ppc4xx_pciex_check_core_init(struct device_node *np) else ppc4xx_pciex_hwops = &ppc440speB_pcie_hwops; } + if (of_device_is_compatible(np, "ibm,plb-pciex-460ex")) + ppc4xx_pciex_hwops = &ppc460ex_pcie_hwops; #endif /* CONFIG_44x */ #ifdef CONFIG_40x if (of_device_is_compatible(np, "ibm,plb-pciex-405ex")) @@ -1042,8 +1144,7 @@ static int __init ppc4xx_pciex_port_init(struct ppc4xx_pciex_port *port) port->link = 0; } - mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, - mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) | 1 << 20); + dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET, 0, 1 << 20); msleep(100); return 0; diff --git a/arch/powerpc/sysdev/ppc4xx_pci.h b/arch/powerpc/sysdev/ppc4xx_pci.h index 1c07908dc6ef..d04e40b306fb 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.h +++ b/arch/powerpc/sysdev/ppc4xx_pci.h @@ -271,6 +271,59 @@ #define PESDR1_405EX_PHYSTA 0x044C /* + * 460EX additional DCRs + */ +#define PESDR0_460EX_L0BIST 0x0308 +#define PESDR0_460EX_L0BISTSTS 0x0309 +#define PESDR0_460EX_L0CDRCTL 0x030A +#define PESDR0_460EX_L0DRV 0x030B +#define PESDR0_460EX_L0REC 0x030C +#define PESDR0_460EX_L0LPB 0x030D +#define PESDR0_460EX_L0CLK 0x030E +#define PESDR0_460EX_PHY_CTL_RST 0x030F +#define PESDR0_460EX_RSTSTA 0x0310 +#define PESDR0_460EX_OBS 0x0311 +#define PESDR0_460EX_L0ERRC 0x0320 + +#define PESDR1_460EX_L0BIST 0x0348 +#define PESDR1_460EX_L1BIST 0x0349 +#define PESDR1_460EX_L2BIST 0x034A +#define PESDR1_460EX_L3BIST 0x034B +#define PESDR1_460EX_L0BISTSTS 0x034C +#define PESDR1_460EX_L1BISTSTS 0x034D +#define PESDR1_460EX_L2BISTSTS 0x034E +#define PESDR1_460EX_L3BISTSTS 0x034F +#define PESDR1_460EX_L0CDRCTL 0x0350 +#define PESDR1_460EX_L1CDRCTL 0x0351 +#define PESDR1_460EX_L2CDRCTL 0x0352 +#define PESDR1_460EX_L3CDRCTL 0x0353 +#define PESDR1_460EX_L0DRV 0x0354 +#define PESDR1_460EX_L1DRV 0x0355 +#define PESDR1_460EX_L2DRV 0x0356 +#define PESDR1_460EX_L3DRV 0x0357 +#define PESDR1_460EX_L0REC 0x0358 +#define PESDR1_460EX_L1REC 0x0359 +#define PESDR1_460EX_L2REC 0x035A +#define PESDR1_460EX_L3REC 0x035B +#define PESDR1_460EX_L0LPB 0x035C +#define PESDR1_460EX_L1LPB 0x035D +#define PESDR1_460EX_L2LPB 0x035E +#define PESDR1_460EX_L3LPB 0x035F +#define PESDR1_460EX_L0CLK 0x0360 +#define PESDR1_460EX_L1CLK 0x0361 +#define PESDR1_460EX_L2CLK 0x0362 +#define PESDR1_460EX_L3CLK 0x0363 +#define PESDR1_460EX_PHY_CTL_RST 0x0364 +#define PESDR1_460EX_RSTSTA 0x0365 +#define PESDR1_460EX_OBS 0x0366 +#define PESDR1_460EX_L0ERRC 0x0368 +#define PESDR1_460EX_L1ERRC 0x0369 +#define PESDR1_460EX_L2ERRC 0x036A +#define PESDR1_460EX_L3ERRC 0x036B +#define PESDR0_460EX_IHS1 0x036C +#define PESDR0_460EX_IHS2 0x036D + +/* * Of the above, some are common offsets from the base */ #define PESDRn_UTLSET1 0x00 @@ -353,6 +406,12 @@ #define PECFG_POM2LAL 0x390 #define PECFG_POM2LAH 0x394 +/* SDR Bit Mappings */ +#define PESDRx_RCSSET_HLDPLB 0x10000000 +#define PESDRx_RCSSET_RSTGU 0x01000000 +#define PESDRx_RCSSET_RDY 0x00100000 +#define PESDRx_RCSSET_RSTDL 0x00010000 +#define PESDRx_RCSSET_RSTPYN 0x00001000 enum { diff --git a/arch/powerpc/sysdev/ppc4xx_soc.c b/arch/powerpc/sysdev/ppc4xx_soc.c new file mode 100644 index 000000000000..5b32adc9a9b2 --- /dev/null +++ b/arch/powerpc/sysdev/ppc4xx_soc.c @@ -0,0 +1,200 @@ +/* + * IBM/AMCC PPC4xx SoC setup code + * + * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de> + * + * L2 cache routines cloned from arch/ppc/syslib/ibm440gx_common.c which is: + * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> + * Copyright (c) 2003 - 2006 Zultys Technologies + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/of_platform.h> + +#include <asm/dcr.h> +#include <asm/dcr-regs.h> +#include <asm/reg.h> + +static u32 dcrbase_l2c; + +/* + * L2-cache + */ + +/* Issue L2C diagnostic command */ +static inline u32 l2c_diag(u32 addr) +{ + mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, addr); + mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_DIAG); + while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC)) + ; + + return mfdcr(dcrbase_l2c + DCRN_L2C0_DATA); +} + +static irqreturn_t l2c_error_handler(int irq, void *dev) +{ + u32 sr = mfdcr(dcrbase_l2c + DCRN_L2C0_SR); + + if (sr & L2C_SR_CPE) { + /* Read cache trapped address */ + u32 addr = l2c_diag(0x42000000); + printk(KERN_EMERG "L2C: Cache Parity Error, addr[16:26] = 0x%08x\n", + addr); + } + if (sr & L2C_SR_TPE) { + /* Read tag trapped address */ + u32 addr = l2c_diag(0x82000000) >> 16; + printk(KERN_EMERG "L2C: Tag Parity Error, addr[16:26] = 0x%08x\n", + addr); + } + + /* Clear parity errors */ + if (sr & (L2C_SR_CPE | L2C_SR_TPE)){ + mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0); + mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE); + } else { + printk(KERN_EMERG "L2C: LRU error\n"); + } + + return IRQ_HANDLED; +} + +static int __init ppc4xx_l2c_probe(void) +{ + struct device_node *np; + u32 r; + unsigned long flags; + int irq; + const u32 *dcrreg; + u32 dcrbase_isram; + int len; + const u32 *prop; + u32 l2_size; + + np = of_find_compatible_node(NULL, NULL, "ibm,l2-cache"); + if (!np) + return 0; + + /* Get l2 cache size */ + prop = of_get_property(np, "cache-size", NULL); + if (prop == NULL) { + printk(KERN_ERR "%s: Can't get cache-size!\n", np->full_name); + of_node_put(np); + return -ENODEV; + } + l2_size = prop[0]; + + /* Map DCRs */ + dcrreg = of_get_property(np, "dcr-reg", &len); + if (!dcrreg || (len != 4 * sizeof(u32))) { + printk(KERN_ERR "%s: Can't get DCR register base !", + np->full_name); + of_node_put(np); + return -ENODEV; + } + dcrbase_isram = dcrreg[0]; + dcrbase_l2c = dcrreg[2]; + + /* Get and map irq number from device tree */ + irq = irq_of_parse_and_map(np, 0); + if (irq == NO_IRQ) { + printk(KERN_ERR "irq_of_parse_and_map failed\n"); + of_node_put(np); + return -ENODEV; + } + + /* Install error handler */ + if (request_irq(irq, l2c_error_handler, IRQF_DISABLED, "L2C", 0) < 0) { + printk(KERN_ERR "Cannot install L2C error handler" + ", cache is not enabled\n"); + of_node_put(np); + return -ENODEV; + } + + local_irq_save(flags); + asm volatile ("sync" ::: "memory"); + + /* Disable SRAM */ + mtdcr(dcrbase_isram + DCRN_SRAM0_DPC, + mfdcr(dcrbase_isram + DCRN_SRAM0_DPC) & ~SRAM_DPC_ENABLE); + mtdcr(dcrbase_isram + DCRN_SRAM0_SB0CR, + mfdcr(dcrbase_isram + DCRN_SRAM0_SB0CR) & ~SRAM_SBCR_BU_MASK); + mtdcr(dcrbase_isram + DCRN_SRAM0_SB1CR, + mfdcr(dcrbase_isram + DCRN_SRAM0_SB1CR) & ~SRAM_SBCR_BU_MASK); + mtdcr(dcrbase_isram + DCRN_SRAM0_SB2CR, + mfdcr(dcrbase_isram + DCRN_SRAM0_SB2CR) & ~SRAM_SBCR_BU_MASK); + mtdcr(dcrbase_isram + DCRN_SRAM0_SB3CR, + mfdcr(dcrbase_isram + DCRN_SRAM0_SB3CR) & ~SRAM_SBCR_BU_MASK); + + /* Enable L2_MODE without ICU/DCU */ + r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG) & + ~(L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_SS_MASK); + r |= L2C_CFG_L2M | L2C_CFG_SS_256; + mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r); + + mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0); + + /* Hardware Clear Command */ + mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_HCC); + while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC)) + ; + + /* Clear Cache Parity and Tag Errors */ + mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE); + + /* Enable 64G snoop region starting at 0 */ + r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP0) & + ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK); + r |= L2C_SNP_SSR_32G | L2C_SNP_ESR; + mtdcr(dcrbase_l2c + DCRN_L2C0_SNP0, r); + + r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP1) & + ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK); + r |= 0x80000000 | L2C_SNP_SSR_32G | L2C_SNP_ESR; + mtdcr(dcrbase_l2c + DCRN_L2C0_SNP1, r); + + asm volatile ("sync" ::: "memory"); + + /* Enable ICU/DCU ports */ + r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG); + r &= ~(L2C_CFG_DCW_MASK | L2C_CFG_PMUX_MASK | L2C_CFG_PMIM + | L2C_CFG_TPEI | L2C_CFG_CPEI | L2C_CFG_NAM | L2C_CFG_NBRM); + r |= L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_TPC | L2C_CFG_CPC | L2C_CFG_FRAN + | L2C_CFG_CPIM | L2C_CFG_TPIM | L2C_CFG_LIM | L2C_CFG_SMCM; + + /* Check for 460EX/GT special handling */ + if (of_device_is_compatible(np, "ibm,l2-cache-460ex")) + r |= L2C_CFG_RDBW; + + mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r); + + asm volatile ("sync; isync" ::: "memory"); + local_irq_restore(flags); + + printk(KERN_INFO "%dk L2-cache enabled\n", l2_size >> 10); + + of_node_put(np); + return 0; +} +arch_initcall(ppc4xx_l2c_probe); + +/* + * At present, this routine just applies a system reset. + */ +void ppc4xx_reset_system(char *cmd) +{ + mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_RST_SYSTEM); + while (1) + ; /* Just in case the reset doesn't work */ +} diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c index 6efbd5e5bb1b..cff550eec7e8 100644 --- a/arch/powerpc/sysdev/qe_lib/qe.c +++ b/arch/powerpc/sysdev/qe_lib/qe.c @@ -55,7 +55,7 @@ struct qe_snum { /* We allocate this here because it is used almost exclusively for * the communication processor devices. */ -struct qe_immap *qe_immr = NULL; +struct qe_immap __iomem *qe_immr; EXPORT_SYMBOL(qe_immr); static struct qe_snum snums[QE_NUM_OF_SNUM]; /* Dynamically allocated SNUMs */ @@ -156,7 +156,7 @@ EXPORT_SYMBOL(qe_issue_cmd); */ static unsigned int brg_clk = 0; -unsigned int get_brg_clk(void) +unsigned int qe_get_brg_clk(void) { struct device_node *qe; unsigned int size; @@ -180,6 +180,7 @@ unsigned int get_brg_clk(void) return brg_clk; } +EXPORT_SYMBOL(qe_get_brg_clk); /* Program the BRG to the given sampling rate and multiplier * @@ -197,7 +198,7 @@ int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier) if ((brg < QE_BRG1) || (brg > QE_BRG16)) return -EINVAL; - divisor = get_brg_clk() / (rate * multiplier); + divisor = qe_get_brg_clk() / (rate * multiplier); if (divisor > QE_BRGC_DIVISOR_MAX + 1) { div16 = QE_BRGC_DIV16; @@ -415,12 +416,6 @@ void qe_muram_dump(void) } EXPORT_SYMBOL(qe_muram_dump); -void *qe_muram_addr(unsigned long offset) -{ - return (void *)&qe_immr->muram[offset]; -} -EXPORT_SYMBOL(qe_muram_addr); - /* The maximum number of RISCs we support */ #define MAX_QE_RISC 2 @@ -509,7 +504,7 @@ int qe_upload_firmware(const struct qe_firmware *firmware) } /* Validate some of the fields */ - if ((firmware->count < 1) || (firmware->count >= MAX_QE_RISC)) { + if ((firmware->count < 1) || (firmware->count > MAX_QE_RISC)) { printk(KERN_ERR "qe-firmware: invalid data\n"); return -EINVAL; } @@ -609,7 +604,10 @@ struct qe_firmware_info *qe_get_firmware_info(void) * If we haven't checked yet, and a driver hasn't uploaded a firmware * yet, then check the device tree for information. */ - if (initialized || qe_firmware_uploaded) + if (qe_firmware_uploaded) + return &qe_firmware_info; + + if (initialized) return NULL; initialized = 1; diff --git a/arch/powerpc/sysdev/qe_lib/qe_io.c b/arch/powerpc/sysdev/qe_lib/qe_io.c index e53ea4d374a0..93916a48afec 100644 --- a/arch/powerpc/sysdev/qe_lib/qe_io.c +++ b/arch/powerpc/sysdev/qe_lib/qe_io.c @@ -22,6 +22,7 @@ #include <linux/ioport.h> #include <asm/io.h> +#include <asm/qe.h> #include <asm/prom.h> #include <sysdev/fsl_soc.h> @@ -41,7 +42,7 @@ struct port_regs { #endif }; -static struct port_regs *par_io = NULL; +static struct port_regs __iomem *par_io; static int num_par_io_ports = 0; int par_io_init(struct device_node *np) @@ -165,7 +166,7 @@ int par_io_of_config(struct device_node *np) } ph = of_get_property(np, "pio-handle", NULL); - if (ph == 0) { + if (ph == NULL) { printk(KERN_ERR "pio-handle not available \n"); return -1; } @@ -200,7 +201,7 @@ static void dump_par_io(void) { unsigned int i; - printk(KERN_INFO "%s: par_io=%p\n", __FUNCTION__, par_io); + printk(KERN_INFO "%s: par_io=%p\n", __func__, par_io); for (i = 0; i < num_par_io_ports; i++) { printk(KERN_INFO " cpodr[%u]=%08x\n", i, in_be32(&par_io[i].cpodr)); diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c index 3223acbc39e5..bcf88e6ce962 100644 --- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c +++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c @@ -148,57 +148,57 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc /* check if the UCC port number is in range. */ if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) { - printk(KERN_ERR "%s: illegal UCC number\n", __FUNCTION__); + printk(KERN_ERR "%s: illegal UCC number\n", __func__); return -EINVAL; } /* Check that 'max_rx_buf_length' is properly aligned (4). */ if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) { printk(KERN_ERR "%s: max_rx_buf_length not aligned\n", - __FUNCTION__); + __func__); return -EINVAL; } /* Validate Virtual Fifo register values */ if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) { - printk(KERN_ERR "%s: urfs is too small\n", __FUNCTION__); + printk(KERN_ERR "%s: urfs is too small\n", __func__); return -EINVAL; } if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - printk(KERN_ERR "%s: urfs is not aligned\n", __FUNCTION__); + printk(KERN_ERR "%s: urfs is not aligned\n", __func__); return -EINVAL; } if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - printk(KERN_ERR "%s: urfet is not aligned.\n", __FUNCTION__); + printk(KERN_ERR "%s: urfet is not aligned.\n", __func__); return -EINVAL; } if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - printk(KERN_ERR "%s: urfset is not aligned\n", __FUNCTION__); + printk(KERN_ERR "%s: urfset is not aligned\n", __func__); return -EINVAL; } if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - printk(KERN_ERR "%s: utfs is not aligned\n", __FUNCTION__); + printk(KERN_ERR "%s: utfs is not aligned\n", __func__); return -EINVAL; } if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - printk(KERN_ERR "%s: utfet is not aligned\n", __FUNCTION__); + printk(KERN_ERR "%s: utfet is not aligned\n", __func__); return -EINVAL; } if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - printk(KERN_ERR "%s: utftt is not aligned\n", __FUNCTION__); + printk(KERN_ERR "%s: utftt is not aligned\n", __func__); return -EINVAL; } uccf = kzalloc(sizeof(struct ucc_fast_private), GFP_KERNEL); if (!uccf) { printk(KERN_ERR "%s: Cannot allocate private data\n", - __FUNCTION__); + __func__); return -ENOMEM; } @@ -207,7 +207,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc /* Set the PHY base address */ uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast)); if (uccf->uf_regs == NULL) { - printk(KERN_ERR "%s: Cannot map UCC registers\n", __FUNCTION__); + printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__); return -ENOMEM; } @@ -230,7 +230,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc /* Set UCC to fast type */ ret = ucc_set_type(uf_info->ucc_num, UCC_SPEED_TYPE_FAST); if (ret) { - printk(KERN_ERR "%s: cannot set UCC type\n", __FUNCTION__); + printk(KERN_ERR "%s: cannot set UCC type\n", __func__); ucc_fast_free(uccf); return ret; } @@ -270,7 +270,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); if (IS_ERR_VALUE(uccf->ucc_fast_tx_virtual_fifo_base_offset)) { printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n", - __FUNCTION__); + __func__); uccf->ucc_fast_tx_virtual_fifo_base_offset = 0; ucc_fast_free(uccf); return -ENOMEM; @@ -283,7 +283,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); if (IS_ERR_VALUE(uccf->ucc_fast_rx_virtual_fifo_base_offset)) { printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n", - __FUNCTION__); + __func__); uccf->ucc_fast_rx_virtual_fifo_base_offset = 0; ucc_fast_free(uccf); return -ENOMEM; @@ -314,7 +314,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->rx_clock, COMM_DIR_RX)) { printk(KERN_ERR "%s: illegal value for RX clock\n", - __FUNCTION__); + __func__); ucc_fast_free(uccf); return -EINVAL; } @@ -323,7 +323,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->tx_clock, COMM_DIR_TX)) { printk(KERN_ERR "%s: illegal value for TX clock\n", - __FUNCTION__); + __func__); ucc_fast_free(uccf); return -EINVAL; } diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c index b2870b208ddb..a578bc77b9d5 100644 --- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c +++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c @@ -142,7 +142,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc /* check if the UCC port number is in range. */ if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) { - printk(KERN_ERR "%s: illegal UCC number\n", __FUNCTION__); + printk(KERN_ERR "%s: illegal UCC number\n", __func__); return -EINVAL; } @@ -161,7 +161,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc uccs = kzalloc(sizeof(struct ucc_slow_private), GFP_KERNEL); if (!uccs) { printk(KERN_ERR "%s: Cannot allocate private data\n", - __FUNCTION__); + __func__); return -ENOMEM; } @@ -170,7 +170,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc /* Set the PHY base address */ uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow)); if (uccs->us_regs == NULL) { - printk(KERN_ERR "%s: Cannot map UCC registers\n", __FUNCTION__); + printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__); return -ENOMEM; } @@ -189,7 +189,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc uccs->us_pram_offset = qe_muram_alloc(UCC_SLOW_PRAM_SIZE, ALIGNMENT_OF_UCC_SLOW_PRAM); if (IS_ERR_VALUE(uccs->us_pram_offset)) { - printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __FUNCTION__); + printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __func__); ucc_slow_free(uccs); return -ENOMEM; } @@ -202,7 +202,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc /* Set UCC to slow type */ ret = ucc_set_type(us_info->ucc_num, UCC_SPEED_TYPE_SLOW); if (ret) { - printk(KERN_ERR "%s: cannot set UCC type", __FUNCTION__); + printk(KERN_ERR "%s: cannot set UCC type", __func__); ucc_slow_free(uccs); return ret; } @@ -216,7 +216,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd), QE_ALIGNMENT_OF_BD); if (IS_ERR_VALUE(uccs->rx_base_offset)) { - printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __FUNCTION__, + printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __func__, us_info->rx_bd_ring_len); uccs->rx_base_offset = 0; ucc_slow_free(uccs); @@ -227,7 +227,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd), QE_ALIGNMENT_OF_BD); if (IS_ERR_VALUE(uccs->tx_base_offset)) { - printk(KERN_ERR "%s: cannot allocate TX BDs", __FUNCTION__); + printk(KERN_ERR "%s: cannot allocate TX BDs", __func__); uccs->tx_base_offset = 0; ucc_slow_free(uccs); return -ENOMEM; @@ -317,7 +317,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->rx_clock, COMM_DIR_RX)) { printk(KERN_ERR "%s: illegal value for RX clock\n", - __FUNCTION__); + __func__); ucc_slow_free(uccs); return -EINVAL; } @@ -325,7 +325,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->tx_clock, COMM_DIR_TX)) { printk(KERN_ERR "%s: illegal value for TX clock\n", - __FUNCTION__); + __func__); ucc_slow_free(uccs); return -EINVAL; } diff --git a/arch/powerpc/sysdev/rtc_cmos_setup.c b/arch/powerpc/sysdev/rtc_cmos_setup.c index 0c9ac7ee08fb..c09ddc0dbeb3 100644 --- a/arch/powerpc/sysdev/rtc_cmos_setup.c +++ b/arch/powerpc/sysdev/rtc_cmos_setup.c @@ -56,3 +56,5 @@ static int __init add_rtc(void) return 0; } fs_initcall(add_rtc); + +MODULE_LICENSE("GPL"); diff --git a/arch/powerpc/sysdev/tsi108_dev.c b/arch/powerpc/sysdev/tsi108_dev.c index be2808a292f7..d4d15aaf18fa 100644 --- a/arch/powerpc/sysdev/tsi108_dev.c +++ b/arch/powerpc/sysdev/tsi108_dev.c @@ -84,7 +84,7 @@ static int __init tsi108_eth_of_init(void) ret = of_address_to_resource(np, 0, &r[0]); DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n", - __FUNCTION__,r[0].name, r[0].start, r[0].end); + __func__,r[0].name, r[0].start, r[0].end); if (ret) goto err; @@ -93,7 +93,7 @@ static int __init tsi108_eth_of_init(void) r[1].end = irq_of_parse_and_map(np, 0); r[1].flags = IORESOURCE_IRQ; DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n", - __FUNCTION__,r[1].name, r[1].start, r[1].end); + __func__,r[1].name, r[1].start, r[1].end); tsi_eth_dev = platform_device_register_simple("tsi-ethernet", i++, &r[0], diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c index 31d3d33d91fc..ac1a72dc21e5 100644 --- a/arch/powerpc/sysdev/tsi108_pci.c +++ b/arch/powerpc/sysdev/tsi108_pci.c @@ -207,7 +207,7 @@ int __init tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary) /* PCI Config mapping */ tsi108_pci_cfg_base = (u32)ioremap(cfg_phys, TSI108_PCI_CFG_SIZE); tsi108_pci_cfg_phys = cfg_phys; - DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __FUNCTION__, + DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __func__, tsi108_pci_cfg_base); /* Fetch host bridge registers address */ @@ -395,7 +395,7 @@ static int pci_irq_host_xlate(struct irq_host *h, struct device_node *ct, static int pci_irq_host_map(struct irq_host *h, unsigned int virq, irq_hw_number_t hw) { unsigned int irq; - DBG("%s(%d, 0x%lx)\n", __FUNCTION__, virq, hw); + DBG("%s(%d, 0x%lx)\n", __func__, virq, hw); if ((virq >= 1) && (virq <= 4)){ irq = virq + IRQ_PCI_INTAD_BASE - 1; get_irq_desc(irq)->status |= IRQ_LEVEL; diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index a34172ddc468..52c74780f403 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -45,7 +45,6 @@ #ifdef CONFIG_PPC64 #include <asm/hvcall.h> #include <asm/paca.h> -#include <asm/iseries/it_lp_reg_save.h> #endif #include "nonstdio.h" @@ -1244,15 +1243,12 @@ static void get_function_bounds(unsigned long pc, unsigned long *startp, static int xmon_depth_to_print = 64; -#ifdef CONFIG_PPC64 -#define LRSAVE_OFFSET 0x10 -#define REG_FRAME_MARKER 0x7265677368657265ul /* "regshere" */ -#define MARKER_OFFSET 0x60 +#define LRSAVE_OFFSET (STACK_FRAME_LR_SAVE * sizeof(unsigned long)) +#define MARKER_OFFSET (STACK_FRAME_MARKER * sizeof(unsigned long)) + +#ifdef __powerpc64__ #define REGS_OFFSET 0x70 #else -#define LRSAVE_OFFSET 4 -#define REG_FRAME_MARKER 0x72656773 -#define MARKER_OFFSET 8 #define REGS_OFFSET 16 #endif @@ -1318,7 +1314,7 @@ static void xmon_show_stack(unsigned long sp, unsigned long lr, /* Look for "regshere" marker to see if this is an exception frame. */ if (mread(sp + MARKER_OFFSET, &marker, sizeof(unsigned long)) - && marker == REG_FRAME_MARKER) { + && marker == STACK_FRAME_REGS_MARKER) { if (mread(sp + REGS_OFFSET, ®s, sizeof(regs)) != sizeof(regs)) { printf("Couldn't read registers at %lx\n", @@ -1598,7 +1594,6 @@ void super_regs(void) if (firmware_has_feature(FW_FEATURE_ISERIES)) { struct paca_struct *ptrPaca; struct lppaca *ptrLpPaca; - struct ItLpRegSave *ptrLpRegSave; /* Dump out relevant Paca data areas. */ printf("Paca: \n"); @@ -1611,15 +1606,6 @@ void super_regs(void) printf(" Saved Gpr3=%.16lx Saved Gpr4=%.16lx \n", ptrLpPaca->saved_gpr3, ptrLpPaca->saved_gpr4); printf(" Saved Gpr5=%.16lx \n", ptrLpPaca->saved_gpr5); - - printf(" Local Processor Register Save Area (LpRegSave): \n"); - ptrLpRegSave = ptrPaca->reg_save_ptr; - printf(" Saved Sprg0=%.16lx Saved Sprg1=%.16lx \n", - ptrLpRegSave->xSPRG0, ptrLpRegSave->xSPRG0); - printf(" Saved Sprg2=%.16lx Saved Sprg3=%.16lx \n", - ptrLpRegSave->xSPRG2, ptrLpRegSave->xSPRG3); - printf(" Saved Msr =%.16lx Saved Nia =%.16lx \n", - ptrLpRegSave->xMSR, ptrLpRegSave->xNIA); } #endif |