summaryrefslogtreecommitdiff
path: root/arch/ppc/4xx_io/serial_sicc.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/4xx_io/serial_sicc.c')
-rw-r--r--arch/ppc/4xx_io/serial_sicc.c2005
1 files changed, 0 insertions, 2005 deletions
diff --git a/arch/ppc/4xx_io/serial_sicc.c b/arch/ppc/4xx_io/serial_sicc.c
deleted file mode 100644
index efa0a56e230b..000000000000
--- a/arch/ppc/4xx_io/serial_sicc.c
+++ /dev/null
@@ -1,2005 +0,0 @@
-/*
- * Driver for IBM STB3xxx SICC serial port
- *
- * Based on drivers/char/serial_amba.c, by ARM Ltd.
- *
- * Copyright 2001 IBM Corp.
- * Author: IBM China Research Lab
- * Yudong Yang <yangyud@cn.ibm.com>
- * Yi Ge <geyi@cn.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- *
- * This is a driver for SICC serial port on IBM Redwood 4 evaluation board.
- * The driver support both as a console device and normal serial device and
- * is compatible with normal ttyS* devices.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/fcntl.h>
-#include <linux/ptrace.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/capability.h>
-#include <linux/circ_buf.h>
-#include <linux/serial.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/bitops.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/serial.h>
-
-
-#include <linux/serialP.h>
-
-
-/* -----------------------------------------------------------------------------
- * From STB03xxx SICC UART Specification
- * -----------------------------------------------------------------------------
- * UART Register Offsets.
- */
-
-#define BL_SICC_LSR 0x0000000 /* line status register read/clear */
-#define BL_SICC_LSRS 0x0000001 /* set line status register read/set */
-#define BL_SICC_HSR 0x0000002 /* handshake status register r/clear */
-#define BL_SICC_HSRS 0x0000003 /* set handshake status register r/set */
-#define BL_SICC_BRDH 0x0000004 /* baudrate divisor high reg r/w */
-#define BL_SICC_BRDL 0x0000005 /* baudrate divisor low reg r/w */
-#define BL_SICC_LCR 0x0000006 /* control register r/w */
-#define BL_SICC_RCR 0x0000007 /* receiver command register r/w */
-#define BL_SICC_TxCR 0x0000008 /* transmitter command register r/w */
-#define BL_SICC_RBR 0x0000009 /* receive buffer r */
-#define BL_SICC_TBR 0x0000009 /* transmit buffer w */
-#define BL_SICC_CTL2 0x000000A /* added for Vesta */
-#define BL_SICC_IrCR 0x000000B /* added for Vesta IR */
-
-/* masks and definitions for serial port control register */
-
-#define _LCR_LM_MASK 0xc0 /* loop back modes */
-#define _LCR_DTR_MASK 0x20 /* data terminal ready 0-inactive */
-#define _LCR_RTS_MASK 0x10 /* request to send 0-inactive */
-#define _LCR_DB_MASK 0x08 /* data bits mask */
-#define _LCR_PE_MASK 0x04 /* parity enable */
-#define _LCR_PTY_MASK 0x02 /* parity */
-#define _LCR_SB_MASK 0x01 /* stop bit mask */
-
-#define _LCR_LM_NORM 0x00 /* normal operation */
-#define _LCR_LM_LOOP 0x40 /* internal loopback mode */
-#define _LCR_LM_ECHO 0x80 /* automatic echo mode */
-#define _LCR_LM_RES 0xc0 /* reserved */
-
-#define _LCR_DTR_ACTIVE _LCR_DTR_MASK /* DTR is active */
-#define _LCR_RTS_ACTIVE _LCR_RTS_MASK /* RTS is active */
-#define _LCR_DB_8_BITS _LCR_DB_MASK /* 8 data bits */
-#define _LCR_DB_7_BITS 0x00 /* 7 data bits */
-#define _LCR_PE_ENABLE _LCR_PE_MASK /* parity enabled */
-#define _LCR_PE_DISABLE 0x00 /* parity disabled */
-#define _LCR_PTY_EVEN 0x00 /* even parity */
-#define _LCR_PTY_ODD _LCR_PTY_MASK /* odd parity */
-#define _LCR_SB_1_BIT 0x00 /* one stop bit */
-#define _LCR_SB_2_BIT _LCR_SB_MASK /* two stop bit */
-
-/* serial port handshake register */
-
-#define _HSR_DIS_MASK 0x80 /* DSR input inactive error mask */
-#define _HSR_CS_MASK 0x40 /* CTS input inactive error mask */
-#define _HSR_DIS_ACT 0x00 /* dsr input is active */
-#define _HSR_DIS_INACT _HSR_DIS_MASK /* dsr input is inactive */
-#define _HSR_CS_ACT 0x00 /* cts input is active */
-#define _HSR_CS_INACT _HSR_CS_MASK /* cts input is active */
-
-/* serial port line status register */
-
-#define _LSR_RBR_MASK 0x80 /* receive buffer ready mask */
-#define _LSR_FE_MASK 0x40 /* framing error */
-#define _LSR_OE_MASK 0x20 /* overrun error */
-#define _LSR_PE_MASK 0x10 /* parity error */
-#define _LSR_LB_MASK 0x08 /* line break */
-#define _LSR_TBR_MASK 0x04 /* transmit buffer ready */
-#define _LSR_TSR_MASK 0x02 /* transmit shift register ready */
-
-#define _LSR_RBR_FULL _LSR_RBR_MASK /* receive buffer is full */
-#define _LSR_FE_ERROR _LSR_FE_MASK /* framing error detected */
-#define _LSR_OE_ERROR _LSR_OE_MASK /* overrun error detected */
-#define _LSR_PE_ERROR _LSR_PE_MASK /* parity error detected */
-#define _LSR_LB_BREAK _LSR_LB_MASK /* line break detected */
-#define _LSR_TBR_EMPTY _LSR_TBR_MASK /* transmit buffer is ready */
-#define _LSR_TSR_EMPTY _LSR_TSR_MASK /* transmit shift register is empty */
-#define _LSR_TX_ALL 0x06 /* all physical transmit is done */
-
-#define _LSR_RX_ERR (_LSR_LB_BREAK | _LSR_FE_MASK | _LSR_OE_MASK | \
- _LSR_PE_MASK )
-
-/* serial port receiver command register */
-
-#define _RCR_ER_MASK 0x80 /* enable receiver mask */
-#define _RCR_DME_MASK 0x60 /* dma mode */
-#define _RCR_EIE_MASK 0x10 /* error interrupt enable mask */
-#define _RCR_PME_MASK 0x08 /* pause mode mask */
-
-#define _RCR_ER_ENABLE _RCR_ER_MASK /* receiver enabled */
-#define _RCR_DME_DISABLE 0x00 /* dma disabled */
-#define _RCR_DME_RXRDY 0x20 /* dma disabled, RxRDY interrupt enabled*/
-#define _RCR_DME_ENABLE2 0x40 /* dma enabled,receiver src channel 2 */
-#define _RCR_DME_ENABLE3 0x60 /* dma enabled,receiver src channel 3 */
-#define _RCR_PME_HARD _RCR_PME_MASK /* RTS controlled by hardware */
-#define _RCR_PME_SOFT 0x00 /* RTS controlled by software */
-
-/* serial port transmit command register */
-
-#define _TxCR_ET_MASK 0x80 /* transmitter enable mask */
-#define _TxCR_DME_MASK 0x60 /* dma mode mask */
-#define _TxCR_TIE_MASK 0x10 /* empty interrupt enable mask */
-#define _TxCR_EIE_MASK 0x08 /* error interrupt enable mask */
-#define _TxCR_SPE_MASK 0x04 /* stop/pause mask */
-#define _TxCR_TB_MASK 0x02 /* transmit break mask */
-
-#define _TxCR_ET_ENABLE _TxCR_ET_MASK /* transmitter enabled */
-#define _TxCR_DME_DISABLE 0x00 /* transmitter disabled, TBR intr disabled */
-#define _TxCR_DME_TBR 0x20 /* transmitter disabled, TBR intr enabled */
-#define _TxCR_DME_CHAN_2 0x40 /* dma enabled, destination chann 2 */
-#define _TxCR_DME_CHAN_3 0x60 /* dma enabled, destination chann 3 */
-
-/* serial ctl reg 2 - added for Vesta */
-
-#define _CTL2_EXTERN 0x80 /* */
-#define _CTL2_USEFIFO 0x40 /* */
-#define _CTL2_RESETRF 0x08 /* */
-#define _CTL2_RESETTF 0x04 /* */
-
-
-
-#define SERIAL_SICC_NAME "ttySICC"
-#define SERIAL_SICC_MAJOR 150
-#define SERIAL_SICC_MINOR 1
-#define SERIAL_SICC_NR 1
-
-#ifndef TRUE
-#define TRUE 1
-#endif
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-/*
- * Things needed by tty driver
- */
-static struct tty_driver *siccnormal_driver;
-
-#if defined(CONFIG_SERIAL_SICC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
-/*
- * Things needed internally to this driver
- */
-
-/*
- * tmp_buf is used as a temporary buffer by serial_write. We need to
- * lock it in case the copy_from_user blocks while swapping in a page,
- * and some other program tries to do a serial write at the same time.
- * Since the lock will only come under contention when the system is
- * swapping and available memory is low, it makes sense to share one
- * buffer across all the serial ports, since it significantly saves
- * memory if large numbers of serial ports are open.
- */
-static u_char *tmp_buf;
-
-#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8)
-
-/* number of characters left in xmit buffer before we ask for more */
-#define WAKEUP_CHARS 256
-#define SICC_ISR_PASS_LIMIT 256
-
-#define EVT_WRITE_WAKEUP 0
-
-struct SICC_icount {
- __u32 cts;
- __u32 dsr;
- __u32 rng;
- __u32 dcd;
- __u32 rx;
- __u32 tx;
- __u32 frame;
- __u32 overrun;
- __u32 parity;
- __u32 brk;
- __u32 buf_overrun;
-};
-
-/*
- * Static information about the port
- */
-struct SICC_port {
- unsigned int uart_base;
- unsigned int uart_base_phys;
- unsigned int irqrx;
- unsigned int irqtx;
- unsigned int uartclk;
- unsigned int fifosize;
- unsigned int tiocm_support;
- void (*set_mctrl)(struct SICC_port *, u_int mctrl);
-};
-
-/*
- * This is the state information which is persistent across opens
- */
-struct SICC_state {
- struct SICC_icount icount;
- unsigned int line;
- unsigned int close_delay;
- unsigned int closing_wait;
- unsigned int custom_divisor;
- unsigned int flags;
- int count;
- struct SICC_info *info;
- spinlock_t sicc_lock;
-};
-
-#define SICC_XMIT_SIZE 1024
-/*
- * This is the state information which is only valid when the port is open.
- */
-struct SICC_info {
- struct SICC_port *port;
- struct SICC_state *state;
- struct tty_struct *tty;
- unsigned char x_char;
- unsigned char old_status;
- unsigned char read_status_mask;
- unsigned char ignore_status_mask;
- struct circ_buf xmit;
- unsigned int flags;
-#ifdef SUPPORT_SYSRQ
- unsigned long sysrq;
-#endif
-
- unsigned int event;
- unsigned int timeout;
- unsigned int lcr_h;
- unsigned int mctrl;
- int blocked_open;
-
- struct tasklet_struct tlet;
-
- wait_queue_head_t open_wait;
- wait_queue_head_t close_wait;
- wait_queue_head_t delta_msr_wait;
-};
-
-#ifdef CONFIG_SERIAL_SICC_CONSOLE
-static struct console siccuart_cons;
-#endif
-static void siccuart_change_speed(struct SICC_info *info, struct termios *old_termios);
-static void siccuart_wait_until_sent(struct tty_struct *tty, int timeout);
-
-
-
-static void powerpcMtcic_cr(unsigned long value)
-{
- mtdcr(DCRN_CICCR, value);
-}
-
-static unsigned long powerpcMfcic_cr(void)
-{
- return mfdcr(DCRN_CICCR);
-}
-
-static unsigned long powerpcMfclkgpcr(void)
-{
- return mfdcr(DCRN_SCCR);
-}
-
-static void sicc_set_mctrl_null(struct SICC_port *port, u_int mctrl)
-{
-}
-
-static struct SICC_port sicc_ports[SERIAL_SICC_NR] = {
- {
- .uart_base = 0,
- .uart_base_phys = SICC0_IO_BASE,
- .irqrx = SICC0_INTRX,
- .irqtx = SICC0_INTTX,
-// .uartclk = 0,
- .fifosize = 1,
- .set_mctrl = sicc_set_mctrl_null,
- }
-};
-
-static struct SICC_state sicc_state[SERIAL_SICC_NR];
-
-static void siccuart_enable_rx_interrupt(struct SICC_info *info)
-{
- unsigned char cr;
-
- cr = readb(info->port->uart_base+BL_SICC_RCR);
- cr &= ~_RCR_DME_MASK;
- cr |= _RCR_DME_RXRDY;
- writeb(cr, info->port->uart_base+BL_SICC_RCR);
-}
-
-static void siccuart_disable_rx_interrupt(struct SICC_info *info)
-{
- unsigned char cr;
-
- cr = readb(info->port->uart_base+BL_SICC_RCR);
- cr &= ~_RCR_DME_MASK;
- cr |= _RCR_DME_DISABLE;
- writeb(cr, info->port->uart_base+BL_SICC_RCR);
-}
-
-
-static void siccuart_enable_tx_interrupt(struct SICC_info *info)
-{
- unsigned char cr;
-
- cr = readb(info->port->uart_base+BL_SICC_TxCR);
- cr &= ~_TxCR_DME_MASK;
- cr |= _TxCR_DME_TBR;
- writeb(cr, info->port->uart_base+BL_SICC_TxCR);
-}
-
-static void siccuart_disable_tx_interrupt(struct SICC_info *info)
-{
- unsigned char cr;
-
- cr = readb(info->port->uart_base+BL_SICC_TxCR);
- cr &= ~_TxCR_DME_MASK;
- cr |= _TxCR_DME_DISABLE;
- writeb(cr, info->port->uart_base+BL_SICC_TxCR);
-}
-
-
-static void siccuart_stop(struct tty_struct *tty)
-{
- struct SICC_info *info = tty->driver_data;
- unsigned long flags;
-
- /* disable interrupts while stopping serial port interrupts */
- spin_lock_irqsave(&info->state->sicc_lock,flags);
- siccuart_disable_tx_interrupt(info);
- spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-}
-
-static void siccuart_start(struct tty_struct *tty)
-{
- struct SICC_info *info = tty->driver_data;
- unsigned long flags;
-
- /* disable interrupts while starting serial port interrupts */
- spin_lock_irqsave(&info->state->sicc_lock,flags);
- if (info->xmit.head != info->xmit.tail
- && info->xmit.buf)
- siccuart_enable_tx_interrupt(info);
- spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-}
-
-
-/*
- * This routine is used by the interrupt handler to schedule
- * processing in the software interrupt portion of the driver.
- */
-static void siccuart_event(struct SICC_info *info, int event)
-{
- info->event |= 1 << event;
- tasklet_schedule(&info->tlet);
-}
-
-static void
-siccuart_rx_chars(struct SICC_info *info)
-{
- struct tty_struct *tty = info->tty;
- unsigned int status, ch, rsr, flg, ignored = 0;
- struct SICC_icount *icount = &info->state->icount;
- struct SICC_port *port = info->port;
-
- status = readb(port->uart_base+BL_SICC_LSR );
- while (status & _LSR_RBR_FULL) {
- ch = readb(port->uart_base+BL_SICC_RBR);
-
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- goto ignore_char;
- icount->rx++;
-
- flg = TTY_NORMAL;
-
- /*
- * Note that the error handling code is
- * out of the main execution path
- */
- rsr = readb(port->uart_base+BL_SICC_LSR);
- if (rsr & _LSR_RX_ERR)
- goto handle_error;
-#ifdef SUPPORT_SYSRQ
- if (info->sysrq) {
- if (ch && time_before(jiffies, info->sysrq)) {
- handle_sysrq(ch, NULL);
- info->sysrq = 0;
- goto ignore_char;
- }
- info->sysrq = 0;
- }
-#endif
- error_return:
- *tty->flip.flag_buf_ptr++ = flg;
- *tty->flip.char_buf_ptr++ = ch;
- tty->flip.count++;
- ignore_char:
- status = readb(port->uart_base+BL_SICC_LSR );
- }
-out:
- tty_flip_buffer_push(tty);
- return;
-
-handle_error:
- if (rsr & _LSR_LB_BREAK) {
- rsr &= ~(_LSR_FE_MASK | _LSR_PE_MASK);
- icount->brk++;
-
-#ifdef SUPPORT_SYSRQ
- if (info->state->line == siccuart_cons.index) {
- if (!info->sysrq) {
- info->sysrq = jiffies + HZ*5;
- goto ignore_char;
- }
- }
-#endif
- } else if (rsr & _LSR_PE_MASK)
- icount->parity++;
- else if (rsr & _LSR_FE_MASK)
- icount->frame++;
- if (rsr & _LSR_OE_MASK)
- icount->overrun++;
-
- if (rsr & info->ignore_status_mask) {
- if (++ignored > 100)
- goto out;
- goto ignore_char;
- }
- rsr &= info->read_status_mask;
-
- if (rsr & _LSR_LB_BREAK)
- flg = TTY_BREAK;
- else if (rsr & _LSR_PE_MASK)
- flg = TTY_PARITY;
- else if (rsr & _LSR_FE_MASK)
- flg = TTY_FRAME;
-
- if (rsr & _LSR_OE_MASK) {
- /*
- * CHECK: does overrun affect the current character?
- * ASSUMPTION: it does not.
- */
- *tty->flip.flag_buf_ptr++ = flg;
- *tty->flip.char_buf_ptr++ = ch;
- tty->flip.count++;
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- goto ignore_char;
- ch = 0;
- flg = TTY_OVERRUN;
- }
-#ifdef SUPPORT_SYSRQ
- info->sysrq = 0;
-#endif
- goto error_return;
-}
-
-static void siccuart_tx_chars(struct SICC_info *info)
-{
- struct SICC_port *port = info->port;
- int count;
- unsigned char status;
-
-
- if (info->x_char) {
- writeb(info->x_char, port->uart_base+ BL_SICC_TBR);
- info->state->icount.tx++;
- info->x_char = 0;
- return;
- }
- if (info->xmit.head == info->xmit.tail
- || info->tty->stopped
- || info->tty->hw_stopped) {
- siccuart_disable_tx_interrupt(info);
- writeb(status&(~_LSR_RBR_MASK),port->uart_base+BL_SICC_LSR);
- return;
- }
-
- count = port->fifosize;
- do {
- writeb(info->xmit.buf[info->xmit.tail], port->uart_base+ BL_SICC_TBR);
- info->xmit.tail = (info->xmit.tail + 1) & (SICC_XMIT_SIZE - 1);
- info->state->icount.tx++;
- if (info->xmit.head == info->xmit.tail)
- break;
- } while (--count > 0);
-
- if (CIRC_CNT(info->xmit.head,
- info->xmit.tail,
- SICC_XMIT_SIZE) < WAKEUP_CHARS)
- siccuart_event(info, EVT_WRITE_WAKEUP);
-
- if (info->xmit.head == info->xmit.tail) {
- siccuart_disable_tx_interrupt(info);
- }
-}
-
-
-static irqreturn_t siccuart_int_rx(int irq, void *dev_id)
-{
- struct SICC_info *info = dev_id;
- siccuart_rx_chars(info)
- return IRQ_HANDLED;
-}
-
-
-static irqreturn_t siccuart_int_tx(int irq, void *dev_id)
-{
- struct SICC_info *info = dev_id;
- siccuart_tx_chars(info);
- return IRQ_HANDLED;
-}
-
-static void siccuart_tasklet_action(unsigned long data)
-{
- struct SICC_info *info = (struct SICC_info *)data;
- struct tty_struct *tty;
-
- tty = info->tty;
- if (!tty || !test_and_clear_bit(EVT_WRITE_WAKEUP, &info->event))
- return;
-
- if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
- tty->ldisc.write_wakeup)
- (tty->ldisc.write_wakeup)(tty);
- wake_up_interruptible(&tty->write_wait);
-}
-
-static int siccuart_startup(struct SICC_info *info)
-{
- unsigned long flags;
- unsigned long page;
- int retval = 0;
-
- if (info->flags & ASYNC_INITIALIZED) {
- return 0;
- }
-
- page = get_zeroed_page(GFP_KERNEL);
- if (!page)
- return -ENOMEM;
-
- if (info->port->uart_base == 0)
- info->port->uart_base = (int)ioremap(info->port->uart_base_phys, PAGE_SIZE);
- if (info->port->uart_base == 0) {
- free_page(page);
- return -ENOMEM;
- }
-
- /* lock access to info while doing setup */
- spin_lock_irqsave(&info->state->sicc_lock,flags);
-
- if (info->xmit.buf)
- free_page(page);
- else
- info->xmit.buf = (unsigned char *) page;
-
-
- info->mctrl = 0;
- if (info->tty->termios->c_cflag & CBAUD)
- info->mctrl = TIOCM_RTS | TIOCM_DTR;
- info->port->set_mctrl(info->port, info->mctrl);
-
- /*
- * initialise the old status of the modem signals
- */
- info->old_status = 0; // UART_GET_FR(info->port) & AMBA_UARTFR_MODEM_ANY;
-
-
- if (info->tty)
- clear_bit(TTY_IO_ERROR, &info->tty->flags);
- info->xmit.head = info->xmit.tail = 0;
-
- /*
- * Set up the tty->alt_speed kludge
- */
- if (info->tty) {
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
- info->tty->alt_speed = 57600;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
- info->tty->alt_speed = 115200;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
- info->tty->alt_speed = 230400;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
- info->tty->alt_speed = 460800;
- }
-
-
- writeb( 0x00, info->port->uart_base + BL_SICC_IrCR ); // disable IrDA
-
-
- /*
- * and set the speed of the serial port
- */
- siccuart_change_speed(info, 0);
-
- // enable rx/tx ports
- writeb(_RCR_ER_ENABLE /*| _RCR_PME_HARD*/, info->port->uart_base + BL_SICC_RCR);
- writeb(_TxCR_ET_ENABLE , info->port->uart_base + BL_SICC_TxCR);
-
- readb(info->port->uart_base + BL_SICC_RBR); // clear rx port
-
- writeb(0xf8, info->port->uart_base + BL_SICC_LSR); /* reset bits 0-4 of LSR */
-
- /*
- * Finally, enable interrupts
- */
-
- /*
- * Allocate the IRQ
- */
- retval = request_irq(info->port->irqrx, siccuart_int_rx, 0, "SICC rx", info);
- if (retval) {
- if (capable(CAP_SYS_ADMIN)) {
- if (info->tty)
- set_bit(TTY_IO_ERROR, &info->tty->flags);
- retval = 0;
- }
- goto errout;
- }
- retval = request_irq(info->port->irqtx, siccuart_int_tx, 0, "SICC tx", info);
- if (retval) {
- if (capable(CAP_SYS_ADMIN)) {
- if (info->tty)
- set_bit(TTY_IO_ERROR, &info->tty->flags);
- retval = 0;
- }
- free_irq(info->port->irqrx, info);
- goto errout;
- }
-
- siccuart_enable_rx_interrupt(info);
-
- info->flags |= ASYNC_INITIALIZED;
- spin_unlock_irqrestore(&info->state->sicc_lock,flags);
- return 0;
-
-
-errout:
- spin_unlock_irqrestore(&info->state->sicc_lock,flags);
- return retval;
-}
-
-/*
- * This routine will shutdown a serial port; interrupts are disabled, and
- * DTR is dropped if the hangup on close termio flag is on.
- */
-static void siccuart_shutdown(struct SICC_info *info)
-{
- unsigned long flags;
-
- if (!(info->flags & ASYNC_INITIALIZED))
- return;
-
- /* lock while shutting down port */
- spin_lock_irqsave(&info->state->sicc_lock,flags); /* Disable interrupts */
-
- /*
- * clear delta_msr_wait queue to avoid mem leaks: we may free the irq
- * here so the queue might never be woken up
- */
- wake_up_interruptible(&info->delta_msr_wait);
-
- /*
- * disable all interrupts, disable the port
- */
- siccuart_disable_rx_interrupt(info);
- siccuart_disable_tx_interrupt(info);
-
- /*
- * Free the IRQ
- */
- free_irq(info->port->irqtx, info);
- free_irq(info->port->irqrx, info);
-
- if (info->xmit.buf) {
- unsigned long pg = (unsigned long) info->xmit.buf;
- info->xmit.buf = NULL;
- free_page(pg);
- }
-
-
- if (!info->tty || (info->tty->termios->c_cflag & HUPCL))
- info->mctrl &= ~(TIOCM_DTR|TIOCM_RTS);
- info->port->set_mctrl(info->port, info->mctrl);
-
- /* kill off our tasklet */
- tasklet_kill(&info->tlet);
- if (info->tty)
- set_bit(TTY_IO_ERROR, &info->tty->flags);
-
- info->flags &= ~ASYNC_INITIALIZED;
-
- spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-}
-
-
-static void siccuart_change_speed(struct SICC_info *info, struct termios *old_termios)
-{
- unsigned int lcr_h, baud, quot, cflag, old_rcr, old_tcr, bits;
- unsigned long flags;
-
- if (!info->tty || !info->tty->termios)
- return;
-
- cflag = info->tty->termios->c_cflag;
-
- pr_debug("siccuart_set_cflag(0x%x) called\n", cflag);
- /* byte size and parity */
- switch (cflag & CSIZE) {
- case CS7: lcr_h = _LCR_PE_DISABLE | _LCR_DB_7_BITS | _LCR_SB_1_BIT; bits = 9; break;
- default: lcr_h = _LCR_PE_DISABLE | _LCR_DB_8_BITS | _LCR_SB_1_BIT; bits = 10; break; // CS8
- }
- if (cflag & CSTOPB) {
- lcr_h |= _LCR_SB_2_BIT;
- bits ++;
- }
- if (cflag & PARENB) {
- lcr_h |= _LCR_PE_ENABLE;
- bits++;
- if (!(cflag & PARODD))
- lcr_h |= _LCR_PTY_ODD;
- else
- lcr_h |= _LCR_PTY_EVEN;
- }
-
- do {
- /* Determine divisor based on baud rate */
- baud = tty_get_baud_rate(info->tty);
- if (!baud)
- baud = 9600;
-
-
- {
- // here is ppc403SetBaud(com_port, baud);
- unsigned long divisor, clockSource, temp;
-
- /* Ensure CICCR[7] is 0 to select Internal Baud Clock */
- powerpcMtcic_cr((unsigned long)(powerpcMfcic_cr() & 0xFEFFFFFF));
-
- /* Determine Internal Baud Clock Frequency */
- /* powerpcMfclkgpcr() reads DCR 0x120 - the*/
- /* SCCR (Serial Clock Control Register) on Vesta */
- temp = powerpcMfclkgpcr();
-
- if(temp & 0x00000080) {
- clockSource = 324000000;
- }
- else {
- clockSource = 216000000;
- }
- clockSource = clockSource/(unsigned long)((temp&0x00FC0000)>>18);
- divisor = clockSource/(16*baud) - 1;
- /* divisor has only 12 bits of resolution */
- if(divisor>0x00000FFF){
- divisor=0x00000FFF;
- }
-
- quot = divisor;
- }
-
- if (baud == 38400 &&
- ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
- quot = info->state->custom_divisor;
-
- if (!quot && old_termios) {
- info->tty->termios->c_cflag &= ~CBAUD;
- info->tty->termios->c_cflag |= (old_termios->c_cflag & CBAUD);
- old_termios = NULL;
- }
- } while (quot == 0 && old_termios);
-
- /* As a last resort, if the quotient is zero, default to 9600 bps */
- if (!quot)
- quot = (info->port->uartclk / (16 * 9600)) - 1;
-
- info->timeout = info->port->fifosize * HZ * bits / baud;
- info->timeout += HZ/50; /* Add .02 seconds of slop */
-
- if (cflag & CRTSCTS)
- info->flags |= ASYNC_CTS_FLOW;
- else
- info->flags &= ~ASYNC_CTS_FLOW;
- if (cflag & CLOCAL)
- info->flags &= ~ASYNC_CHECK_CD;
- else
- info->flags |= ASYNC_CHECK_CD;
-
- /*
- * Set up parity check flag
- */
-#define RELEVENT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
-
- info->read_status_mask = _LSR_OE_MASK;
- if (I_INPCK(info->tty))
- info->read_status_mask |= _LSR_FE_MASK | _LSR_PE_MASK;
- if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
- info->read_status_mask |= _LSR_LB_MASK;
-
- /*
- * Characters to ignore
- */
- info->ignore_status_mask = 0;
- if (I_IGNPAR(info->tty))
- info->ignore_status_mask |= _LSR_FE_MASK | _LSR_PE_MASK;
- if (I_IGNBRK(info->tty)) {
- info->ignore_status_mask |= _LSR_LB_MASK;
- /*
- * If we're ignoring parity and break indicators,
- * ignore overruns to (for real raw support).
- */
- if (I_IGNPAR(info->tty))
- info->ignore_status_mask |= _LSR_OE_MASK;
- }
-
- /* disable interrupts while reading and clearing registers */
- spin_lock_irqsave(&info->state->sicc_lock,flags);
-
- old_rcr = readb(info->port->uart_base + BL_SICC_RCR);
- old_tcr = readb(info->port->uart_base + BL_SICC_TxCR);
-
-
- writeb(0, info->port->uart_base + BL_SICC_RCR);
- writeb(0, info->port->uart_base + BL_SICC_TxCR);
-
- /*RLBtrace (&ppc403Chan0, 0x2000000c, 0, 0);*/
-
-
- spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-
-
- /* Set baud rate */
- writeb((quot & 0x00000F00)>>8, info->port->uart_base + BL_SICC_BRDH );
- writeb( quot & 0x00000FF, info->port->uart_base + BL_SICC_BRDL );
-
- /* Set CTL2 reg to use external clock (ExtClk) and enable FIFOs. */
- /* For now, do NOT use FIFOs since 403 UART did not have this */
- /* capability and this driver was inherited from 403UART. */
- writeb(_CTL2_EXTERN, info->port->uart_base + BL_SICC_CTL2);
-
- writeb(lcr_h, info->port->uart_base + BL_SICC_LCR);
-
- writeb(old_rcr, info->port->uart_base + BL_SICC_RCR); // restore rcr
- writeb(old_tcr, info->port->uart_base + BL_SICC_TxCR); // restore txcr
-
-}
-
-
-static void siccuart_put_char(struct tty_struct *tty, u_char ch)
-{
- struct SICC_info *info = tty->driver_data;
- unsigned long flags;
-
- if (!tty || !info->xmit.buf)
- return;
-
- /* lock info->xmit while adding character to tx buffer */
- spin_lock_irqsave(&info->state->sicc_lock,flags);
- if (CIRC_SPACE(info->xmit.head, info->xmit.tail, SICC_XMIT_SIZE) != 0) {
- info->xmit.buf[info->xmit.head] = ch;
- info->xmit.head = (info->xmit.head + 1) & (SICC_XMIT_SIZE - 1);
- }
- spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-}
-
-static void siccuart_flush_chars(struct tty_struct *tty)
-{
- struct SICC_info *info = tty->driver_data;
- unsigned long flags;
-
- if (info->xmit.head == info->xmit.tail
- || tty->stopped
- || tty->hw_stopped
- || !info->xmit.buf)
- return;
-
- /* disable interrupts while transmitting characters */
- spin_lock_irqsave(&info->state->sicc_lock,flags);
- siccuart_enable_tx_interrupt(info);
- spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-}
-
-static int siccuart_write(struct tty_struct *tty,
- const u_char * buf, int count)
-{
- struct SICC_info *info = tty->driver_data;
- unsigned long flags;
- int c, ret = 0;
-
- if (!tty || !info->xmit.buf || !tmp_buf)
- return 0;
-
- /* lock info->xmit while removing characters from buffer */
- spin_lock_irqsave(&info->state->sicc_lock,flags);
- while (1) {
- c = CIRC_SPACE_TO_END(info->xmit.head,
- info->xmit.tail,
- SICC_XMIT_SIZE);
- if (count < c)
- c = count;
- if (c <= 0)
- break;
- memcpy(info->xmit.buf + info->xmit.head, buf, c);
- info->xmit.head = (info->xmit.head + c) &
- (SICC_XMIT_SIZE - 1);
- buf += c;
- count -= c;
- ret += c;
- }
- if (info->xmit.head != info->xmit.tail
- && !tty->stopped
- && !tty->hw_stopped)
- siccuart_enable_tx_interrupt(info);
- spin_unlock_irqrestore(&info->state->sicc_lock,flags);
- return ret;
-}
-
-static int siccuart_write_room(struct tty_struct *tty)
-{
- struct SICC_info *info = tty->driver_data;
-
- return CIRC_SPACE(info->xmit.head, info->xmit.tail, SICC_XMIT_SIZE);
-}
-
-static int siccuart_chars_in_buffer(struct tty_struct *tty)
-{
- struct SICC_info *info = tty->driver_data;
-
- return CIRC_CNT(info->xmit.head, info->xmit.tail, SICC_XMIT_SIZE);
-}
-
-static void siccuart_flush_buffer(struct tty_struct *tty)
-{
- struct SICC_info *info = tty->driver_data;
- unsigned long flags;
-
- pr_debug("siccuart_flush_buffer(%d) called\n", tty->index);
- /* lock info->xmit while zeroing buffer counts */
- spin_lock_irqsave(&info->state->sicc_lock,flags);
- info->xmit.head = info->xmit.tail = 0;
- spin_unlock_irqrestore(&info->state->sicc_lock,flags);
- wake_up_interruptible(&tty->write_wait);
- if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
- tty->ldisc.write_wakeup)
- (tty->ldisc.write_wakeup)(tty);
-}
-
-/*
- * This function is used to send a high-priority XON/XOFF character to
- * the device
- */
-static void siccuart_send_xchar(struct tty_struct *tty, char ch)
-{
- struct SICC_info *info = tty->driver_data;
-
- info->x_char = ch;
- if (ch)
- siccuart_enable_tx_interrupt(info);
-}
-
-static void siccuart_throttle(struct tty_struct *tty)
-{
- struct SICC_info *info = tty->driver_data;
- unsigned long flags;
-
- if (I_IXOFF(tty))
- siccuart_send_xchar(tty, STOP_CHAR(tty));
-
- if (tty->termios->c_cflag & CRTSCTS) {
- /* disable interrupts while setting modem control lines */
- spin_lock_irqsave(&info->state->sicc_lock,flags);
- info->mctrl &= ~TIOCM_RTS;
- info->port->set_mctrl(info->port, info->mctrl);
- spin_unlock_irqrestore(&info->state->sicc_lock,flags);
- }
-}
-
-static void siccuart_unthrottle(struct tty_struct *tty)
-{
- struct SICC_info *info = (struct SICC_info *) tty->driver_data;
- unsigned long flags;
-
- if (I_IXOFF(tty)) {
- if (info->x_char)
- info->x_char = 0;
- else
- siccuart_send_xchar(tty, START_CHAR(tty));
- }
-
- if (tty->termios->c_cflag & CRTSCTS) {
- /* disable interrupts while setting modem control lines */
- spin_lock_irqsave(&info->state->sicc_lock,flags);
- info->mctrl |= TIOCM_RTS;
- info->port->set_mctrl(info->port, info->mctrl);
- spin_unlock_irqrestore(&info->state->sicc_lock,flags);
- }
-}
-
-static int get_serial_info(struct SICC_info *info, struct serial_struct *retinfo)
-{
- struct SICC_state *state = info->state;
- struct SICC_port *port = info->port;
- struct serial_struct tmp;
-
- memset(&tmp, 0, sizeof(tmp));
- tmp.type = 0;
- tmp.line = state->line;
- tmp.port = port->uart_base;
- if (HIGH_BITS_OFFSET)
- tmp.port_high = port->uart_base >> HIGH_BITS_OFFSET;
- tmp.irq = port->irqrx;
- tmp.flags = 0;
- tmp.xmit_fifo_size = port->fifosize;
- tmp.baud_base = port->uartclk / 16;
- tmp.close_delay = state->close_delay;
- tmp.closing_wait = state->closing_wait;
- tmp.custom_divisor = state->custom_divisor;
-
- if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
- return -EFAULT;
- return 0;
-}
-
-static int set_serial_info(struct SICC_info *info,
- struct serial_struct *newinfo)
-{
- struct serial_struct new_serial;
- struct SICC_state *state, old_state;
- struct SICC_port *port;
- unsigned long new_port;
- unsigned int i, change_irq, change_port;
- int retval = 0;
-
- if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
- return -EFAULT;
-
- state = info->state;
- old_state = *state;
- port = info->port;
-
- new_port = new_serial.port;
- if (HIGH_BITS_OFFSET)
- new_port += (unsigned long) new_serial.port_high << HIGH_BITS_OFFSET;
-
- change_irq = new_serial.irq != port->irqrx;
- change_port = new_port != port->uart_base;
-
- if (!capable(CAP_SYS_ADMIN)) {
- if (change_irq || change_port ||
- (new_serial.baud_base != port->uartclk / 16) ||
- (new_serial.close_delay != state->close_delay) ||
- (new_serial.xmit_fifo_size != port->fifosize) ||
- ((new_serial.flags & ~ASYNC_USR_MASK) !=
- (state->flags & ~ASYNC_USR_MASK)))
- return -EPERM;
- state->flags = ((state->flags & ~ASYNC_USR_MASK) |
- (new_serial.flags & ASYNC_USR_MASK));
- info->flags = ((info->flags & ~ASYNC_USR_MASK) |
- (new_serial.flags & ASYNC_USR_MASK));
- state->custom_divisor = new_serial.custom_divisor;
- goto check_and_exit;
- }
-
- if ((new_serial.irq >= NR_IRQS) || (new_serial.irq < 0) ||
- (new_serial.baud_base < 9600))
- return -EINVAL;
-
- if (new_serial.type && change_port) {
- for (i = 0; i < SERIAL_SICC_NR; i++)
- if ((port != sicc_ports + i) &&
- sicc_ports[i].uart_base != new_port)
- return -EADDRINUSE;
- }
-
- if ((change_port || change_irq) && (state->count > 1))
- return -EBUSY;
-
- /*
- * OK, past this point, all the error checking has been done.
- * At this point, we start making changes.....
- */
- port->uartclk = new_serial.baud_base * 16;
- state->flags = ((state->flags & ~ASYNC_FLAGS) |
- (new_serial.flags & ASYNC_FLAGS));
- info->flags = ((state->flags & ~ASYNC_INTERNAL_FLAGS) |
- (info->flags & ASYNC_INTERNAL_FLAGS));
- state->custom_divisor = new_serial.custom_divisor;
- state->close_delay = msecs_to_jiffies(10 * new_serial.close_delay);
- state->closing_wait = msecs_to_jiffies(10 * new_serial.closing_wait);
- info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
- port->fifosize = new_serial.xmit_fifo_size;
-
- if (change_port || change_irq) {
- /*
- * We need to shutdown the serial port at the old
- * port/irq combination.
- */
- siccuart_shutdown(info);
- port->irqrx = new_serial.irq;
- port->uart_base = new_port;
- }
-
-check_and_exit:
- if (!port->uart_base)
- return 0;
- if (info->flags & ASYNC_INITIALIZED) {
- if ((old_state.flags & ASYNC_SPD_MASK) !=
- (state->flags & ASYNC_SPD_MASK) ||
- (old_state.custom_divisor != state->custom_divisor)) {
- if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
- info->tty->alt_speed = 57600;
- if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
- info->tty->alt_speed = 115200;
- if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
- info->tty->alt_speed = 230400;
- if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
- info->tty->alt_speed = 460800;
- siccuart_change_speed(info, NULL);
- }
- } else
- retval = siccuart_startup(info);
- return retval;
-}
-
-
-/*
- * get_lsr_info - get line status register info
- */
-static int get_lsr_info(struct SICC_info *info, unsigned int *value)
-{
- unsigned int result, status;
- unsigned long flags;
-
- /* disable interrupts while reading status from port */
- spin_lock_irqsave(&info->state->sicc_lock,flags);
- status = readb(info->port->uart_base + BL_SICC_LSR);
- spin_unlock_irqrestore(&info->state->sicc_lock,flags);
- result = status & _LSR_TSR_EMPTY ? TIOCSER_TEMT : 0;
-
- /*
- * If we're about to load something into the transmit
- * register, we'll pretend the transmitter isn't empty to
- * avoid a race condition (depending on when the transmit
- * interrupt happens).
- */
- if (info->x_char ||
- ((CIRC_CNT(info->xmit.head, info->xmit.tail,
- SICC_XMIT_SIZE) > 0) &&
- !info->tty->stopped && !info->tty->hw_stopped))
- result &= TIOCSER_TEMT;
-
- return put_user(result, value);
-}
-
-static int get_modem_info(struct SICC_info *info, unsigned int *value)
-{
- unsigned int result = info->mctrl;
-
- return put_user(result, value);
-}
-
-static int set_modem_info(struct SICC_info *info, unsigned int cmd,
- unsigned int *value)
-{
- unsigned int arg, old;
- unsigned long flags;
-
- if (get_user(arg, value))
- return -EFAULT;
-
- old = info->mctrl;
- switch (cmd) {
- case TIOCMBIS:
- info->mctrl |= arg;
- break;
-
- case TIOCMBIC:
- info->mctrl &= ~arg;
- break;
-
- case TIOCMSET:
- info->mctrl = arg;
- break;
-
- default:
- return -EINVAL;
- }
- /* disable interrupts while setting modem control lines */
- spin_lock_irqsave(&info->state->sicc_lock,flags);
- if (old != info->mctrl)
- info->port->set_mctrl(info->port, info->mctrl);
- spin_unlock_irqrestore(&info->state->sicc_lock,flags);
- return 0;
-}
-
-static void siccuart_break_ctl(struct tty_struct *tty, int break_state)
-{
- struct SICC_info *info = tty->driver_data;
- unsigned long flags;
- unsigned int lcr_h;
-
-
- /* disable interrupts while setting break state */
- spin_lock_irqsave(&info->state->sicc_lock,flags);
- lcr_h = readb(info->port + BL_SICC_LSR);
- if (break_state == -1)
- lcr_h |= _LSR_LB_MASK;
- else
- lcr_h &= ~_LSR_LB_MASK;
- writeb(lcr_h, info->port + BL_SICC_LSRS);
- spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-}
-
-static int siccuart_ioctl(struct tty_struct *tty, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- struct SICC_info *info = tty->driver_data;
- struct SICC_icount cnow;
- struct serial_icounter_struct icount;
- unsigned long flags;
-
- if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
- (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) &&
- (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
- if (tty->flags & (1 << TTY_IO_ERROR))
- return -EIO;
- }
-
- switch (cmd) {
- case TIOCMGET:
- return get_modem_info(info, (unsigned int *)arg);
- case TIOCMBIS:
- case TIOCMBIC:
- case TIOCMSET:
- return set_modem_info(info, cmd, (unsigned int *)arg);
- case TIOCGSERIAL:
- return get_serial_info(info,
- (struct serial_struct *)arg);
- case TIOCSSERIAL:
- return set_serial_info(info,
- (struct serial_struct *)arg);
- case TIOCSERGETLSR: /* Get line status register */
- return get_lsr_info(info, (unsigned int *)arg);
- /*
- * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
- * - mask passed in arg for lines of interest
- * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
- * Caller should use TIOCGICOUNT to see which one it was
- */
- case TIOCMIWAIT:
- return 0;
- /*
- * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
- * Return: write counters to the user passed counter struct
- * NB: both 1->0 and 0->1 transitions are counted except for
- * RI where only 0->1 is counted.
- */
- case TIOCGICOUNT:
- /* disable interrupts while getting interrupt count */
- spin_lock_irqsave(&info->state->sicc_lock,flags);
- cnow = info->state->icount;
- spin_unlock_irqrestore(&info->state->sicc_lock,flags);
- icount.cts = cnow.cts;
- icount.dsr = cnow.dsr;
- icount.rng = cnow.rng;
- icount.dcd = cnow.dcd;
- icount.rx = cnow.rx;
- icount.tx = cnow.tx;
- icount.frame = cnow.frame;
- icount.overrun = cnow.overrun;
- icount.parity = cnow.parity;
- icount.brk = cnow.brk;
- icount.buf_overrun = cnow.buf_overrun;
-
- return copy_to_user((void *)arg, &icount, sizeof(icount))
- ? -EFAULT : 0;
-
- default:
- return -ENOIOCTLCMD;
- }
- return 0;
-}
-
-static void siccuart_set_termios(struct tty_struct *tty, struct termios *old_termios)
-{
- struct SICC_info *info = tty->driver_data;
- unsigned long flags;
- unsigned int cflag = tty->termios->c_cflag;
-
- if ((cflag ^ old_termios->c_cflag) == 0 &&
- RELEVENT_IFLAG(tty->termios->c_iflag ^ old_termios->c_iflag) == 0)
- return;
-
- siccuart_change_speed(info, old_termios);
-
- /* Handle transition to B0 status */
- if ((old_termios->c_cflag & CBAUD) &&
- !(cflag & CBAUD)) {
- /* disable interrupts while setting break state */
- spin_lock_irqsave(&info->state->sicc_lock,flags);
- info->mctrl &= ~(TIOCM_RTS | TIOCM_DTR);
- info->port->set_mctrl(info->port, info->mctrl);
- spin_unlock_irqrestore(&info->state->sicc_lock,flags);
- }
-
- /* Handle transition away from B0 status */
- if (!(old_termios->c_cflag & CBAUD) &&
- (cflag & CBAUD)) {
- /* disable interrupts while setting break state */
- spin_lock_irqsave(&info->state->sicc_lock,flags);
- info->mctrl |= TIOCM_DTR;
- if (!(cflag & CRTSCTS) ||
- !test_bit(TTY_THROTTLED, &tty->flags))
- info->mctrl |= TIOCM_RTS;
- info->port->set_mctrl(info->port, info->mctrl);
- spin_unlock_irqrestore(&info->state->sicc_lock,flags);
- }
-
- /* Handle turning off CRTSCTS */
- if ((old_termios->c_cflag & CRTSCTS) &&
- !(cflag & CRTSCTS)) {
- tty->hw_stopped = 0;
- siccuart_start(tty);
- }
-
-#if 0
- /*
- * No need to wake up processes in open wait, since they
- * sample the CLOCAL flag once, and don't recheck it.
- * XXX It's not clear whether the current behavior is correct
- * or not. Hence, this may change.....
- */
- if (!(old_termios->c_cflag & CLOCAL) &&
- (tty->termios->c_cflag & CLOCAL))
- wake_up_interruptible(&info->open_wait);
-#endif
-}
-
-static void siccuart_close(struct tty_struct *tty, struct file *filp)
-{
- struct SICC_info *info = tty->driver_data;
- struct SICC_state *state;
- unsigned long flags;
-
- if (!info)
- return;
-
- state = info->state;
-
- //pr_debug("siccuart_close() called\n");
-
- /* lock tty->driver_data while closing port */
- spin_lock_irqsave(&info->state->sicc_lock,flags);
-
- if (tty_hung_up_p(filp)) {
- goto quick_close;
- }
-
- if ((tty->count == 1) && (state->count != 1)) {
- /*
- * Uh, oh. tty->count is 1, which means that the tty
- * structure will be freed. state->count should always
- * be one in these conditions. If it's greater than
- * one, we've got real problems, since it means the
- * serial port won't be shutdown.
- */
- printk("siccuart_close: bad serial port count; tty->count is 1, state->count is %d\n", state->count);
- state->count = 1;
- }
- if (--state->count < 0) {
- printk("rs_close: bad serial port count for %s: %d\n", tty->name, state->count);
- state->count = 0;
- }
- if (state->count) {
- goto quick_close;
- }
- info->flags |= ASYNC_CLOSING;
- spin_unlock_irqrestore(&info->state->sicc_lock,flags);
- /*
- * Now we wait for the transmit buffer to clear; and we notify
- * the line discipline to only process XON/XOFF characters.
- */
- tty->closing = 1;
- if (info->state->closing_wait != ASYNC_CLOSING_WAIT_NONE)
- tty_wait_until_sent(tty, info->state->closing_wait);
- /*
- * At this point, we stop accepting input. To do this, we
- * disable the receive line status interrupts.
- */
- if (info->flags & ASYNC_INITIALIZED) {
- siccuart_disable_rx_interrupt(info);
- /*
- * Before we drop DTR, make sure the UART transmitter
- * has completely drained; this is especially
- * important if there is a transmit FIFO!
- */
- siccuart_wait_until_sent(tty, info->timeout);
- }
- siccuart_shutdown(info);
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
- if (tty->ldisc.flush_buffer)
- tty->ldisc.flush_buffer(tty);
- tty->closing = 0;
- info->event = 0;
- info->tty = NULL;
- if (info->blocked_open) {
- if (info->state->close_delay)
- schedule_timeout_interruptible(info->state->close_delay);
- wake_up_interruptible(&info->open_wait);
- }
- info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- wake_up_interruptible(&info->close_wait);
- return;
-
-quick_close:
- spin_unlock_irqrestore(&info->state->sicc_lock,flags);
- return;
-}
-
-static void siccuart_wait_until_sent(struct tty_struct *tty, int timeout)
-{
- struct SICC_info *info = (struct SICC_info *) tty->driver_data;
- unsigned long char_time, expire;
-
- if (info->port->fifosize == 0)
- return;
-
- /*
- * Set the check interval to be 1/5 of the estimated time to
- * send a single character, and make it at least 1. The check
- * interval should also be less than the timeout.
- *
- * Note: we have to use pretty tight timings here to satisfy
- * the NIST-PCTS.
- */
- char_time = (info->timeout - msecs_to_jiffies(20)) / info->port->fifosize;
- char_time = char_time / 5;
- if (char_time == 0)
- char_time = 1;
-
- // Crazy!! sometimes the input arg 'timeout' can be negtive numbers :-(
- if (timeout >= 0 && timeout < char_time)
- char_time = timeout;
- /*
- * If the transmitter hasn't cleared in twice the approximate
- * amount of time to send the entire FIFO, it probably won't
- * ever clear. This assumes the UART isn't doing flow
- * control, which is currently the case. Hence, if it ever
- * takes longer than info->timeout, this is probably due to a
- * UART bug of some kind. So, we clamp the timeout parameter at
- * 2*info->timeout.
- */
- if (!timeout || timeout > 2 * info->timeout)
- timeout = 2 * info->timeout;
-
- expire = jiffies + timeout;
- pr_debug("siccuart_wait_until_sent(%d), jiff=%lu, expire=%lu char_time=%lu...\n",
- tty->index, jiffies,
- expire, char_time);
- while ((readb(info->port->uart_base + BL_SICC_LSR) & _LSR_TX_ALL) != _LSR_TX_ALL) {
- schedule_timeout_interruptible(char_time);
- if (signal_pending(current))
- break;
- if (timeout && time_after(jiffies, expire))
- break;
- }
- set_current_state(TASK_RUNNING);
-}
-
-static void siccuart_hangup(struct tty_struct *tty)
-{
- struct SICC_info *info = tty->driver_data;
- struct SICC_state *state = info->state;
-
- siccuart_flush_buffer(tty);
- if (info->flags & ASYNC_CLOSING)
- return;
- siccuart_shutdown(info);
- info->event = 0;
- state->count = 0;
- info->flags &= ~ASYNC_NORMAL_ACTIVE;
- info->tty = NULL;
- wake_up_interruptible(&info->open_wait);
-}
-
-static int block_til_ready(struct tty_struct *tty, struct file *filp,
- struct SICC_info *info)
-{
- DECLARE_WAITQUEUE(wait, current);
- struct SICC_state *state = info->state;
- unsigned long flags;
- int do_clocal = 0, extra_count = 0, retval;
-
- /*
- * If the device is in the middle of being closed, then block
- * until it's done, and then try again.
- */
- if (tty_hung_up_p(filp) ||
- (info->flags & ASYNC_CLOSING)) {
- if (info->flags & ASYNC_CLOSING)
- interruptible_sleep_on(&info->close_wait);
- return (info->flags & ASYNC_HUP_NOTIFY) ?
- -EAGAIN : -ERESTARTSYS;
- }
-
- /*
- * If non-blocking mode is set, or the port is not enabled,
- * then make the check up front and then exit.
- */
- if ((filp->f_flags & O_NONBLOCK) ||
- (tty->flags & (1 << TTY_IO_ERROR))) {
- info->flags |= ASYNC_NORMAL_ACTIVE;
- return 0;
- }
-
- if (tty->termios->c_cflag & CLOCAL)
- do_clocal = 1;
-
- /*
- * Block waiting for the carrier detect and the line to become
- * free (i.e., not in use by the callout). While we are in
- * this loop, state->count is dropped by one, so that
- * rs_close() knows when to free things. We restore it upon
- * exit, either normal or abnormal.
- */
- retval = 0;
- add_wait_queue(&info->open_wait, &wait);
- /* lock while decrementing state->count */
- spin_lock_irqsave(&info->state->sicc_lock,flags);
- if (!tty_hung_up_p(filp)) {
- extra_count = 1;
- state->count--;
- }
- spin_unlock_irqrestore(&info->state->sicc_lock,flags);
- info->blocked_open++;
- while (1) {
- /* disable interrupts while setting modem control lines */
- spin_lock_irqsave(&info->state->sicc_lock,flags);
- if (tty->termios->c_cflag & CBAUD) {
- info->mctrl = TIOCM_DTR | TIOCM_RTS;
- info->port->set_mctrl(info->port, info->mctrl);
- }
- spin_unlock_irqrestore(&info->state->sicc_lock,flags);
- set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp) ||
- !(info->flags & ASYNC_INITIALIZED)) {
- if (info->flags & ASYNC_HUP_NOTIFY)
- retval = -EAGAIN;
- else
- retval = -ERESTARTSYS;
- break;
- }
- if (!(info->flags & ASYNC_CLOSING) &&
- (do_clocal /*|| (UART_GET_FR(info->port) & SICC_UARTFR_DCD)*/))
- break;
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- break;
- }
- schedule();
- }
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&info->open_wait, &wait);
- if (extra_count)
- state->count++;
- info->blocked_open--;
- if (retval)
- return retval;
- info->flags |= ASYNC_NORMAL_ACTIVE;
- return 0;
-}
-
-static struct SICC_info *siccuart_get(int line)
-{
- struct SICC_info *info;
- struct SICC_state *state = sicc_state + line;
-
- state->count++;
- if (state->info)
- return state->info;
- info = kzalloc(sizeof(struct SICC_info), GFP_KERNEL);
- if (info) {
- init_waitqueue_head(&info->open_wait);
- init_waitqueue_head(&info->close_wait);
- init_waitqueue_head(&info->delta_msr_wait);
- info->flags = state->flags;
- info->state = state;
- info->port = sicc_ports + line;
- tasklet_init(&info->tlet, siccuart_tasklet_action,
- (unsigned long)info);
- }
- if (state->info) {
- kfree(info);
- return state->info;
- }
- state->info = info;
- return info;
-}
-
-static int siccuart_open(struct tty_struct *tty, struct file *filp)
-{
- struct SICC_info *info;
- int retval, line = tty->index;
-
-
- // is this a line that we've got?
- if (line >= SERIAL_SICC_NR) {
- return -ENODEV;
- }
-
- info = siccuart_get(line);
- if (!info)
- return -ENOMEM;
-
- tty->driver_data = info;
- info->tty = tty;
- info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
-
- /*
- * Make sure we have the temporary buffer allocated
- */
- if (!tmp_buf) {
- unsigned long page = get_zeroed_page(GFP_KERNEL);
- if (tmp_buf)
- free_page(page);
- else if (!page) {
- return -ENOMEM;
- }
- tmp_buf = (u_char *)page;
- }
-
- /*
- * If the port is in the middle of closing, bail out now.
- */
- if (tty_hung_up_p(filp) ||
- (info->flags & ASYNC_CLOSING)) {
- if (info->flags & ASYNC_CLOSING)
- interruptible_sleep_on(&info->close_wait);
- return -EAGAIN;
- }
-
- /*
- * Start up the serial port
- */
- retval = siccuart_startup(info);
- if (retval) {
- return retval;
- }
-
- retval = block_til_ready(tty, filp, info);
- if (retval) {
- return retval;
- }
-
-#ifdef CONFIG_SERIAL_SICC_CONSOLE
- if (siccuart_cons.cflag && siccuart_cons.index == line) {
- tty->termios->c_cflag = siccuart_cons.cflag;
- siccuart_cons.cflag = 0;
- siccuart_change_speed(info, NULL);
- }
-#endif
- return 0;
-}
-
-static const struct tty_operations sicc_ops = {
- .open = siccuart_open,
- .close = siccuart_close,
- .write = siccuart_write,
- .put_char = siccuart_put_char,
- .flush_chars = siccuart_flush_chars,
- .write_room = siccuart_write_room,
- .chars_in_buffer = siccuart_chars_in_buffer,
- .flush_buffer = siccuart_flush_buffer,
- .ioctl = siccuart_ioctl,
- .throttle = siccuart_throttle,
- .unthrottle = siccuart_unthrottle,
- .send_xchar = siccuart_send_xchar,
- .set_termios = siccuart_set_termios,
- .stop = siccuart_stop,
- .start = siccuart_start,
- .hangup = siccuart_hangup,
- .break_ctl = siccuart_break_ctl,
- .wait_until_sent = siccuart_wait_until_sent,
-};
-
-int __init siccuart_init(void)
-{
- int i;
- siccnormal_driver = alloc_tty_driver(SERIAL_SICC_NR);
- if (!siccnormal_driver)
- return -ENOMEM;
- printk("IBM Vesta SICC serial port driver V 0.1 by Yudong Yang and Yi Ge / IBM CRL .\n");
- siccnormal_driver->driver_name = "serial_sicc";
- siccnormal_driver->owner = THIS_MODULE;
- siccnormal_driver->name = SERIAL_SICC_NAME;
- siccnormal_driver->major = SERIAL_SICC_MAJOR;
- siccnormal_driver->minor_start = SERIAL_SICC_MINOR;
- siccnormal_driver->type = TTY_DRIVER_TYPE_SERIAL;
- siccnormal_driver->subtype = SERIAL_TYPE_NORMAL;
- siccnormal_driver->init_termios = tty_std_termios;
- siccnormal_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
- siccnormal_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
- tty_set_operations(siccnormal_driver, &sicc_ops);
-
- if (tty_register_driver(siccnormal_driver))
- panic("Couldn't register SICC serial driver\n");
-
- for (i = 0; i < SERIAL_SICC_NR; i++) {
- struct SICC_state *state = sicc_state + i;
- state->line = i;
- state->close_delay = msecs_to_jiffies(500);
- state->closing_wait = 30 * HZ;
- spin_lock_init(&state->sicc_lock);
- }
-
-
- return 0;
-}
-
-__initcall(siccuart_init);
-
-#ifdef CONFIG_SERIAL_SICC_CONSOLE
-/************** console driver *****************/
-
-/*
- * This code is currently never used; console->read is never called.
- * Therefore, although we have an implementation, we don't use it.
- * FIXME: the "const char *s" should be fixed to "char *s" some day.
- * (when the definition in include/linux/console.h is also fixed)
- */
-#ifdef used_and_not_const_char_pointer
-static int siccuart_console_read(struct console *co, const char *s, u_int count)
-{
- struct SICC_port *port = &sicc_ports[co->index];
- unsigned int status;
- char *w;
- int c;
-
- pr_debug("siccuart_console_read() called\n");
-
- c = 0;
- w = s;
- while (c < count) {
- if(readb(port->uart_base + BL_SICC_LSR) & _LSR_RBR_FULL) {
- *w++ = readb(port->uart_base + BL_SICC_RBR);
- c++;
- } else {
- // nothing more to get, return
- return c;
- }
- }
- // return the count
- return c;
-}
-#endif
-
-/*
- * Print a string to the serial port trying not to disturb
- * any possible real use of the port...
- *
- * The console_lock must be held when we get here.
- */
-static void siccuart_console_write(struct console *co, const char *s, u_int count)
-{
- struct SICC_port *port = &sicc_ports[co->index];
- unsigned int old_cr;
- int i;
-
- /*
- * First save the CR then disable the interrupts
- */
- old_cr = readb(port->uart_base + BL_SICC_TxCR);
- writeb(old_cr & ~_TxCR_DME_MASK, port->uart_base + BL_SICC_TxCR);
-
- /*
- * Now, do each character
- */
- for (i = 0; i < count; i++) {
- while ((readb(port->uart_base + BL_SICC_LSR)&_LSR_TX_ALL) != _LSR_TX_ALL);
- writeb(s[i], port->uart_base + BL_SICC_TBR);
- if (s[i] == '\n') {
- while ((readb(port->uart_base + BL_SICC_LSR)&_LSR_TX_ALL) != _LSR_TX_ALL);
- writeb('\r', port->uart_base + BL_SICC_TBR);
- }
- }
-
- /*
- * Finally, wait for transmitter to become empty
- * and restore the TCR
- */
- while ((readb(port->uart_base + BL_SICC_LSR)&_LSR_TX_ALL) != _LSR_TX_ALL);
- writeb(old_cr, port->uart_base + BL_SICC_TxCR);
-}
-
-/*
- * Receive character from the serial port
- */
-static int siccuart_console_wait_key(struct console *co)
-{
- struct SICC_port *port = &sicc_ports[co->index];
- int c;
-
- while(!(readb(port->uart_base + BL_SICC_LSR) & _LSR_RBR_FULL));
- c = readb(port->uart_base + BL_SICC_RBR);
- return c;
-}
-
-static struct tty_driver *siccuart_console_device(struct console *c, int *index)
-{
- *index = c->index;
- return siccnormal_driver;
-}
-
-static int __init siccuart_console_setup(struct console *co, char *options)
-{
- struct SICC_port *port;
- int baud = 9600;
- int bits = 8;
- int parity = 'n';
- u_int cflag = CREAD | HUPCL | CLOCAL;
- u_int lcr_h, quot;
-
-
- if (co->index >= SERIAL_SICC_NR)
- co->index = 0;
-
- port = &sicc_ports[co->index];
-
- if (port->uart_base == 0)
- port->uart_base = (int)ioremap(port->uart_base_phys, PAGE_SIZE);
-
- if (options) {
- char *s = options;
- baud = simple_strtoul(s, NULL, 10);
- while (*s >= '0' && *s <= '9')
- s++;
- if (*s) parity = *s++;
- if (*s) bits = *s - '0';
- }
-
- /*
- * Now construct a cflag setting.
- */
- switch (baud) {
- case 1200: cflag |= B1200; break;
- case 2400: cflag |= B2400; break;
- case 4800: cflag |= B4800; break;
- default: cflag |= B9600; baud = 9600; break;
- case 19200: cflag |= B19200; break;
- case 38400: cflag |= B38400; break;
- case 57600: cflag |= B57600; break;
- case 115200: cflag |= B115200; break;
- }
- switch (bits) {
- case 7: cflag |= CS7; lcr_h = _LCR_PE_DISABLE | _LCR_DB_7_BITS | _LCR_SB_1_BIT; break;
- default: cflag |= CS8; lcr_h = _LCR_PE_DISABLE | _LCR_DB_8_BITS | _LCR_SB_1_BIT; break;
- }
- switch (parity) {
- case 'o':
- case 'O': cflag |= PARODD; lcr_h |= _LCR_PTY_ODD; break;
- case 'e':
- case 'E': cflag |= PARENB; lcr_h |= _LCR_PE_ENABLE | _LCR_PTY_ODD; break;
- }
-
- co->cflag = cflag;
-
-
- {
- // a copy of is inserted here ppc403SetBaud(com_port, (int)9600);
- unsigned long divisor, clockSource, temp;
- unsigned int rate = baud;
-
- /* Ensure CICCR[7] is 0 to select Internal Baud Clock */
- powerpcMtcic_cr((unsigned long)(powerpcMfcic_cr() & 0xFEFFFFFF));
-
- /* Determine Internal Baud Clock Frequency */
- /* powerpcMfclkgpcr() reads DCR 0x120 - the*/
- /* SCCR (Serial Clock Control Register) on Vesta */
- temp = powerpcMfclkgpcr();
-
- if(temp & 0x00000080) {
- clockSource = 324000000;
- }
- else {
- clockSource = 216000000;
- }
- clockSource = clockSource/(unsigned long)((temp&0x00FC0000)>>18);
- divisor = clockSource/(16*rate) - 1;
- /* divisor has only 12 bits of resolution */
- if(divisor>0x00000FFF){
- divisor=0x00000FFF;
- }
-
- quot = divisor;
- }
-
- writeb((quot & 0x00000F00)>>8, port->uart_base + BL_SICC_BRDH );
- writeb( quot & 0x00000FF, port->uart_base + BL_SICC_BRDL );
-
- /* Set CTL2 reg to use external clock (ExtClk) and enable FIFOs. */
- /* For now, do NOT use FIFOs since 403 UART did not have this */
- /* capability and this driver was inherited from 403UART. */
- writeb(_CTL2_EXTERN, port->uart_base + BL_SICC_CTL2);
-
- writeb(lcr_h, port->uart_base + BL_SICC_LCR);
- writeb(_RCR_ER_ENABLE | _RCR_PME_HARD, port->uart_base + BL_SICC_RCR);
- writeb( _TxCR_ET_ENABLE , port->uart_base + BL_SICC_TxCR);
-
- // writeb(, info->port->uart_base + BL_SICC_RCR );
- /*
- * Transmitter Command Register: Transmitter enabled & DMA + TBR interrupt
- * + Transmitter Empty interrupt + Transmitter error interrupt disabled &
- * Stop mode when CTS active enabled & Transmit Break + Pattern Generation
- * mode disabled.
- */
-
- writeb( 0x00, port->uart_base + BL_SICC_IrCR ); // disable IrDA
-
- readb(port->uart_base + BL_SICC_RBR);
-
- writeb(0xf8, port->uart_base + BL_SICC_LSR); /* reset bits 0-4 of LSR */
-
- /* we will enable the port as we need it */
-
- return 0;
-}
-
-static struct console siccuart_cons =
-{
- .name = SERIAL_SICC_NAME,
- .write = siccuart_console_write,
-#ifdef used_and_not_const_char_pointer
- .read = siccuart_console_read,
-#endif
- .device = siccuart_console_device,
- .wait_key = siccuart_console_wait_key,
- .setup = siccuart_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
-};
-
-void __init sicc_console_init(void)
-{
- register_console(&siccuart_cons);
-}
-
-#endif /* CONFIG_SERIAL_SICC_CONSOLE */