diff options
Diffstat (limited to 'arch/ppc/platforms/85xx')
| -rw-r--r-- | arch/ppc/platforms/85xx/mpc8560_ads.c | 89 | ||||
| -rw-r--r-- | arch/ppc/platforms/85xx/mpc85xx_ads_common.h | 19 |
2 files changed, 108 insertions, 0 deletions
diff --git a/arch/ppc/platforms/85xx/mpc8560_ads.c b/arch/ppc/platforms/85xx/mpc8560_ads.c index d90cd24d018e..94badafe4ef1 100644 --- a/arch/ppc/platforms/85xx/mpc8560_ads.c +++ b/arch/ppc/platforms/85xx/mpc8560_ads.c @@ -29,6 +29,7 @@ #include <linux/initrd.h> #include <linux/module.h> #include <linux/fsl_devices.h> +#include <linux/fs_enet_pd.h> #include <asm/system.h> #include <asm/pgtable.h> @@ -58,6 +59,71 @@ * Setup the architecture * */ +static void init_fcc_ioports(void) +{ + struct immap *immap; + struct io_port *io; + u32 tempval; + + immap = cpm2_immr; + + io = &immap->im_ioport; + /* FCC2/3 are on the ports B/C. */ + tempval = in_be32(&io->iop_pdirb); + tempval &= ~PB2_DIRB0; + tempval |= PB2_DIRB1; + out_be32(&io->iop_pdirb, tempval); + + tempval = in_be32(&io->iop_psorb); + tempval &= ~PB2_PSORB0; + tempval |= PB2_PSORB1; + out_be32(&io->iop_psorb, tempval); + + tempval = in_be32(&io->iop_pparb); + tempval |= (PB2_DIRB0 | PB2_DIRB1); + out_be32(&io->iop_pparb, tempval); + + tempval = in_be32(&io->iop_pdirb); + tempval &= ~PB3_DIRB0; + tempval |= PB3_DIRB1; + out_be32(&io->iop_pdirb, tempval); + + tempval = in_be32(&io->iop_psorb); + tempval &= ~PB3_PSORB0; + tempval |= PB3_PSORB1; + out_be32(&io->iop_psorb, tempval); + + tempval = in_be32(&io->iop_pparb); + tempval |= (PB3_DIRB0 | PB3_DIRB1); + out_be32(&io->iop_pparb, tempval); + + tempval = in_be32(&io->iop_pdirc); + tempval |= PC3_DIRC1; + out_be32(&io->iop_pdirc, tempval); + + tempval = in_be32(&io->iop_pparc); + tempval |= PC3_DIRC1; + out_be32(&io->iop_pparc, tempval); + + /* Port C has clocks...... */ + tempval = in_be32(&io->iop_psorc); + tempval &= ~(CLK_TRX); + out_be32(&io->iop_psorc, tempval); + + tempval = in_be32(&io->iop_pdirc); + tempval &= ~(CLK_TRX); + out_be32(&io->iop_pdirc, tempval); + tempval = in_be32(&io->iop_pparc); + tempval |= (CLK_TRX); + out_be32(&io->iop_pparc, tempval); + + /* Configure Serial Interface clock routing. + * First, clear all FCC bits to zero, + * then set the ones we want. + */ + immap->im_cpmux.cmx_fcr &= ~(CPMUX_CLK_MASK); + immap->im_cpmux.cmx_fcr |= CPMUX_CLK_ROUTE; +} static void __init mpc8560ads_setup_arch(void) @@ -66,6 +132,7 @@ mpc8560ads_setup_arch(void) unsigned int freq; struct gianfar_platform_data *pdata; struct gianfar_mdio_data *mdata; + struct fs_platform_info *fpi; cpm2_reset(); @@ -110,6 +177,28 @@ mpc8560ads_setup_arch(void) memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); } + init_fcc_ioports(); + ppc_sys_device_remove(MPC85xx_CPM_FCC1); + + fpi = (struct fs_platform_info *) ppc_sys_get_pdata(MPC85xx_CPM_FCC2); + if (fpi) { + memcpy(fpi->macaddr, binfo->bi_enet2addr, 6); + fpi->bus_id = "0:02"; + fpi->phy_addr = 2; + fpi->dpram_offset = (u32)cpm2_immr->im_dprambase; + fpi->fcc_regs_c = (u32)&cpm2_immr->im_fcc_c[1]; + } + + fpi = (struct fs_platform_info *) ppc_sys_get_pdata(MPC85xx_CPM_FCC3); + if (fpi) { + memcpy(fpi->macaddr, binfo->bi_enet2addr, 6); + fpi->macaddr[5] += 1; + fpi->bus_id = "0:03"; + fpi->phy_addr = 3; + fpi->dpram_offset = (u32)cpm2_immr->im_dprambase; + fpi->fcc_regs_c = (u32)&cpm2_immr->im_fcc_c[2]; + } + #ifdef CONFIG_BLK_DEV_INITRD if (initrd_start) ROOT_DEV = Root_RAM0; diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h index abf32281655d..c8c322fe3680 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h +++ b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h @@ -45,4 +45,23 @@ extern void mpc85xx_ads_map_io(void) __init; #define MPC85XX_PCI1_IO_SIZE 0x01000000 +/* FCC1 Clock Source Configuration. These can be + * redefined in the board specific file. + * Can only choose from CLK9-12 */ +#define F1_RXCLK 12 +#define F1_TXCLK 11 + +/* FCC2 Clock Source Configuration. These can be + * redefined in the board specific file. + * Can only choose from CLK13-16 */ +#define F2_RXCLK 13 +#define F2_TXCLK 14 + +/* FCC3 Clock Source Configuration. These can be + * redefined in the board specific file. + * Can only choose from CLK13-16 */ +#define F3_RXCLK 15 +#define F3_TXCLK 16 + + #endif /* __MACH_MPC85XX_ADS_H__ */ |