summaryrefslogtreecommitdiff
path: root/arch/ppc/platforms/chrp_setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/platforms/chrp_setup.c')
-rw-r--r--arch/ppc/platforms/chrp_setup.c671
1 files changed, 0 insertions, 671 deletions
diff --git a/arch/ppc/platforms/chrp_setup.c b/arch/ppc/platforms/chrp_setup.c
deleted file mode 100644
index 48996b787378..000000000000
--- a/arch/ppc/platforms/chrp_setup.c
+++ /dev/null
@@ -1,671 +0,0 @@
-/*
- * arch/ppc/platforms/setup.c
- *
- * Copyright (C) 1995 Linus Torvalds
- * Adapted from 'alpha' version by Gary Thomas
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- */
-
-/*
- * bootup setup stuff..
- */
-
-#include <linux/config.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/tty.h>
-#include <linux/major.h>
-#include <linux/interrupt.h>
-#include <linux/reboot.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/version.h>
-#include <linux/adb.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/ide.h>
-#include <linux/console.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/initrd.h>
-#include <linux/module.h>
-
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/prom.h>
-#include <asm/gg2.h>
-#include <asm/pci-bridge.h>
-#include <asm/dma.h>
-#include <asm/machdep.h>
-#include <asm/irq.h>
-#include <asm/hydra.h>
-#include <asm/sections.h>
-#include <asm/time.h>
-#include <asm/btext.h>
-#include <asm/i8259.h>
-#include <asm/open_pic.h>
-#include <asm/xmon.h>
-#include "mem_pieces.h"
-
-unsigned long chrp_get_rtc_time(void);
-int chrp_set_rtc_time(unsigned long nowtime);
-void chrp_calibrate_decr(void);
-long chrp_time_init(void);
-
-void chrp_find_bridges(void);
-void chrp_event_scan(void);
-void rtas_display_progress(char *, unsigned short);
-void rtas_indicator_progress(char *, unsigned short);
-void btext_progress(char *, unsigned short);
-
-extern int of_show_percpuinfo(struct seq_file *, int);
-
-int _chrp_type;
-EXPORT_SYMBOL(_chrp_type);
-
-/*
- * XXX this should be in xmon.h, but putting it there means xmon.h
- * has to include <linux/interrupt.h> (to get irqreturn_t), which
- * causes all sorts of problems. -- paulus
- */
-extern irqreturn_t xmon_irq(int, void *, struct pt_regs *);
-
-extern dev_t boot_dev;
-
-extern PTE *Hash, *Hash_end;
-extern unsigned long Hash_size, Hash_mask;
-extern int probingmem;
-extern unsigned long loops_per_jiffy;
-static int max_width;
-
-#ifdef CONFIG_SMP
-extern struct smp_ops_t chrp_smp_ops;
-#endif
-
-static const char *gg2_memtypes[4] = {
- "FPM", "SDRAM", "EDO", "BEDO"
-};
-static const char *gg2_cachesizes[4] = {
- "256 KB", "512 KB", "1 MB", "Reserved"
-};
-static const char *gg2_cachetypes[4] = {
- "Asynchronous", "Reserved", "Flow-Through Synchronous",
- "Pipelined Synchronous"
-};
-static const char *gg2_cachemodes[4] = {
- "Disabled", "Write-Through", "Copy-Back", "Transparent Mode"
-};
-
-int
-chrp_show_cpuinfo(struct seq_file *m)
-{
- int i, sdramen;
- unsigned int t;
- struct device_node *root;
- const char *model = "";
-
- root = find_path_device("/");
- if (root)
- model = get_property(root, "model", NULL);
- seq_printf(m, "machine\t\t: CHRP %s\n", model);
-
- /* longtrail (goldengate) stuff */
- if (!strncmp(model, "IBM,LongTrail", 13)) {
- /* VLSI VAS96011/12 `Golden Gate 2' */
- /* Memory banks */
- sdramen = (in_le32(gg2_pci_config_base + GG2_PCI_DRAM_CTRL)
- >>31) & 1;
- for (i = 0; i < (sdramen ? 4 : 6); i++) {
- t = in_le32(gg2_pci_config_base+
- GG2_PCI_DRAM_BANK0+
- i*4);
- if (!(t & 1))
- continue;
- switch ((t>>8) & 0x1f) {
- case 0x1f:
- model = "4 MB";
- break;
- case 0x1e:
- model = "8 MB";
- break;
- case 0x1c:
- model = "16 MB";
- break;
- case 0x18:
- model = "32 MB";
- break;
- case 0x10:
- model = "64 MB";
- break;
- case 0x00:
- model = "128 MB";
- break;
- default:
- model = "Reserved";
- break;
- }
- seq_printf(m, "memory bank %d\t: %s %s\n", i, model,
- gg2_memtypes[sdramen ? 1 : ((t>>1) & 3)]);
- }
- /* L2 cache */
- t = in_le32(gg2_pci_config_base+GG2_PCI_CC_CTRL);
- seq_printf(m, "board l2\t: %s %s (%s)\n",
- gg2_cachesizes[(t>>7) & 3],
- gg2_cachetypes[(t>>2) & 3],
- gg2_cachemodes[t & 3]);
- }
- return 0;
-}
-
-/*
- * Fixes for the National Semiconductor PC78308VUL SuperI/O
- *
- * Some versions of Open Firmware incorrectly initialize the IRQ settings
- * for keyboard and mouse
- */
-static inline void __init sio_write(u8 val, u8 index)
-{
- outb(index, 0x15c);
- outb(val, 0x15d);
-}
-
-static inline u8 __init sio_read(u8 index)
-{
- outb(index, 0x15c);
- return inb(0x15d);
-}
-
-static void __init sio_fixup_irq(const char *name, u8 device, u8 level,
- u8 type)
-{
- u8 level0, type0, active;
-
- /* select logical device */
- sio_write(device, 0x07);
- active = sio_read(0x30);
- level0 = sio_read(0x70);
- type0 = sio_read(0x71);
- if (level0 != level || type0 != type || !active) {
- printk(KERN_WARNING "sio: %s irq level %d, type %d, %sactive: "
- "remapping to level %d, type %d, active\n",
- name, level0, type0, !active ? "in" : "", level, type);
- sio_write(0x01, 0x30);
- sio_write(level, 0x70);
- sio_write(type, 0x71);
- }
-}
-
-static void __init sio_init(void)
-{
- struct device_node *root;
-
- if ((root = find_path_device("/")) &&
- !strncmp(get_property(root, "model", NULL), "IBM,LongTrail", 13)) {
- /* logical device 0 (KBC/Keyboard) */
- sio_fixup_irq("keyboard", 0, 1, 2);
- /* select logical device 1 (KBC/Mouse) */
- sio_fixup_irq("mouse", 1, 12, 2);
- }
-}
-
-
-static void __init pegasos_set_l2cr(void)
-{
- struct device_node *np;
-
- /* On Pegasos, enable the l2 cache if needed, as the OF forgets it */
- if (_chrp_type != _CHRP_Pegasos)
- return;
-
- /* Enable L2 cache if needed */
- np = find_type_devices("cpu");
- if (np != NULL) {
- unsigned int *l2cr = (unsigned int *)
- get_property (np, "l2cr", NULL);
- if (l2cr == NULL) {
- printk ("Pegasos l2cr : no cpu l2cr property found\n");
- return;
- }
- if (!((*l2cr) & 0x80000000)) {
- printk ("Pegasos l2cr : L2 cache was not active, "
- "activating\n");
- _set_L2CR(0);
- _set_L2CR((*l2cr) | 0x80000000);
- }
- }
-}
-
-void __init chrp_setup_arch(void)
-{
- struct device_node *device;
-
- /* init to some ~sane value until calibrate_delay() runs */
- loops_per_jiffy = 50000000/HZ;
-
-#ifdef CONFIG_BLK_DEV_INITRD
- /* this is fine for chrp */
- initrd_below_start_ok = 1;
-
- if (initrd_start)
- ROOT_DEV = Root_RAM0;
- else
-#endif
- ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */
-
- /* On pegasos, enable the L2 cache if not already done by OF */
- pegasos_set_l2cr();
-
- /* Lookup PCI host bridges */
- chrp_find_bridges();
-
-#ifndef CONFIG_PPC64BRIDGE
- /*
- * Temporary fixes for PCI devices.
- * -- Geert
- */
- hydra_init(); /* Mac I/O */
-
-#endif /* CONFIG_PPC64BRIDGE */
-
- /*
- * Fix the Super I/O configuration
- */
- sio_init();
-
- /* Get the event scan rate for the rtas so we know how
- * often it expects a heartbeat. -- Cort
- */
- if ( rtas_data ) {
- struct property *p;
- device = find_devices("rtas");
- for ( p = device->properties;
- p && strncmp(p->name, "rtas-event-scan-rate", 20);
- p = p->next )
- /* nothing */ ;
- if ( p && *(unsigned long *)p->value ) {
- ppc_md.heartbeat = chrp_event_scan;
- ppc_md.heartbeat_reset = (HZ/(*(unsigned long *)p->value)*30)-1;
- ppc_md.heartbeat_count = 1;
- printk("RTAS Event Scan Rate: %lu (%lu jiffies)\n",
- *(unsigned long *)p->value, ppc_md.heartbeat_reset );
- }
- }
-
- pci_create_OF_bus_map();
-}
-
-void
-chrp_event_scan(void)
-{
- unsigned char log[1024];
- unsigned long ret = 0;
- /* XXX: we should loop until the hardware says no more error logs -- Cort */
- call_rtas( "event-scan", 4, 1, &ret, 0xffffffff, 0,
- __pa(log), 1024 );
- ppc_md.heartbeat_count = ppc_md.heartbeat_reset;
-}
-
-void
-chrp_restart(char *cmd)
-{
- printk("RTAS system-reboot returned %d\n",
- call_rtas("system-reboot", 0, 1, NULL));
- for (;;);
-}
-
-void
-chrp_power_off(void)
-{
- /* allow power on only with power button press */
- printk("RTAS power-off returned %d\n",
- call_rtas("power-off", 2, 1, NULL,0xffffffff,0xffffffff));
- for (;;);
-}
-
-void
-chrp_halt(void)
-{
- chrp_power_off();
-}
-
-/*
- * Finds the open-pic node and sets OpenPIC_Addr based on its reg property.
- * Then checks if it has an interrupt-ranges property. If it does then
- * we have a distributed open-pic, so call openpic_set_sources to tell
- * the openpic code where to find the interrupt source registers.
- */
-static void __init chrp_find_openpic(void)
-{
- struct device_node *np;
- int len, i;
- unsigned int *iranges;
- void __iomem *isu;
-
- np = find_type_devices("open-pic");
- if (np == NULL || np->n_addrs == 0)
- return;
- printk(KERN_INFO "OpenPIC at %x (size %x)\n",
- np->addrs[0].address, np->addrs[0].size);
- OpenPIC_Addr = ioremap(np->addrs[0].address, 0x40000);
- if (OpenPIC_Addr == NULL) {
- printk(KERN_ERR "Failed to map OpenPIC!\n");
- return;
- }
-
- iranges = (unsigned int *) get_property(np, "interrupt-ranges", &len);
- if (iranges == NULL || len < 2 * sizeof(unsigned int))
- return; /* not distributed */
-
- /*
- * The first pair of cells in interrupt-ranges refers to the
- * IDU; subsequent pairs refer to the ISUs.
- */
- len /= 2 * sizeof(unsigned int);
- if (np->n_addrs < len) {
- printk(KERN_ERR "Insufficient addresses for distributed"
- " OpenPIC (%d < %d)\n", np->n_addrs, len);
- return;
- }
- if (iranges[1] != 0) {
- printk(KERN_INFO "OpenPIC irqs %d..%d in IDU\n",
- iranges[0], iranges[0] + iranges[1] - 1);
- openpic_set_sources(iranges[0], iranges[1], NULL);
- }
- for (i = 1; i < len; ++i) {
- iranges += 2;
- printk(KERN_INFO "OpenPIC irqs %d..%d in ISU at %x (%x)\n",
- iranges[0], iranges[0] + iranges[1] - 1,
- np->addrs[i].address, np->addrs[i].size);
- isu = ioremap(np->addrs[i].address, np->addrs[i].size);
- if (isu != NULL)
- openpic_set_sources(iranges[0], iranges[1], isu);
- else
- printk(KERN_ERR "Failed to map OpenPIC ISU at %x!\n",
- np->addrs[i].address);
- }
-}
-
-#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
-static struct irqaction xmon_irqaction = {
- .handler = xmon_irq,
- .mask = CPU_MASK_NONE,
- .name = "XMON break",
-};
-#endif
-
-void __init chrp_init_IRQ(void)
-{
- struct device_node *np;
- unsigned long chrp_int_ack = 0;
- unsigned char init_senses[NR_IRQS - NUM_8259_INTERRUPTS];
-#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
- struct device_node *kbd;
-#endif
-
- for (np = find_devices("pci"); np != NULL; np = np->next) {
- unsigned int *addrp = (unsigned int *)
- get_property(np, "8259-interrupt-acknowledge", NULL);
-
- if (addrp == NULL)
- continue;
- chrp_int_ack = addrp[prom_n_addr_cells(np)-1];
- break;
- }
- if (np == NULL)
- printk(KERN_ERR "Cannot find PCI interrupt acknowledge address\n");
-
- chrp_find_openpic();
-
- if (OpenPIC_Addr) {
- prom_get_irq_senses(init_senses, NUM_8259_INTERRUPTS, NR_IRQS);
- OpenPIC_InitSenses = init_senses;
- OpenPIC_NumInitSenses = NR_IRQS - NUM_8259_INTERRUPTS;
-
- openpic_init(NUM_8259_INTERRUPTS);
- /* We have a cascade on OpenPIC IRQ 0, Linux IRQ 16 */
- openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
- i8259_irq);
-
- }
- i8259_init(chrp_int_ack, 0);
-
-#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
- /* see if there is a keyboard in the device tree
- with a parent of type "adb" */
- for (kbd = find_devices("keyboard"); kbd; kbd = kbd->next)
- if (kbd->parent && kbd->parent->type
- && strcmp(kbd->parent->type, "adb") == 0)
- break;
- if (kbd)
- setup_irq(HYDRA_INT_ADB_NMI, &xmon_irqaction);
-#endif
-}
-
-void __init
-chrp_init2(void)
-{
-#ifdef CONFIG_NVRAM
- chrp_nvram_init();
-#endif
-
- request_region(0x20,0x20,"pic1");
- request_region(0xa0,0x20,"pic2");
- request_region(0x00,0x20,"dma1");
- request_region(0x40,0x20,"timer");
- request_region(0x80,0x10,"dma page reg");
- request_region(0xc0,0x20,"dma2");
-
- if (ppc_md.progress)
- ppc_md.progress(" Have fun! ", 0x7777);
-}
-
-static struct device_node *memory_node;
-
-static int __init get_mem_prop(char *name, struct mem_pieces *mp)
-{
- struct reg_property *rp;
- int i, s;
- unsigned int *ip;
- int nac = prom_n_addr_cells(memory_node);
- int nsc = prom_n_size_cells(memory_node);
-
- ip = (unsigned int *) get_property(memory_node, name, &s);
- if (ip == NULL) {
- printk(KERN_ERR "error: couldn't get %s property on /memory\n",
- name);
- return 0;
- }
- s /= (nsc + nac) * 4;
- rp = mp->regions;
- for (i = 0; i < s; ++i, ip += nac+nsc) {
- if (nac >= 2 && ip[nac-2] != 0)
- continue;
- rp->address = ip[nac-1];
- if (nsc >= 2 && ip[nac+nsc-2] != 0)
- rp->size = ~0U;
- else
- rp->size = ip[nac+nsc-1];
- ++rp;
- }
- mp->n_regions = rp - mp->regions;
-
- /* Make sure the pieces are sorted. */
- mem_pieces_sort(mp);
- mem_pieces_coalesce(mp);
- return 1;
-}
-
-static unsigned long __init chrp_find_end_of_memory(void)
-{
- unsigned long a, total;
- struct mem_pieces phys_mem;
-
- /*
- * Find out where physical memory is, and check that it
- * starts at 0 and is contiguous. It seems that RAM is
- * always physically contiguous on Power Macintoshes.
- *
- * Supporting discontiguous physical memory isn't hard,
- * it just makes the virtual <-> physical mapping functions
- * more complicated (or else you end up wasting space
- * in mem_map).
- */
- memory_node = find_devices("memory");
- if (memory_node == NULL || !get_mem_prop("reg", &phys_mem)
- || phys_mem.n_regions == 0)
- panic("No RAM??");
- a = phys_mem.regions[0].address;
- if (a != 0)
- panic("RAM doesn't start at physical address 0");
- total = phys_mem.regions[0].size;
-
- if (phys_mem.n_regions > 1) {
- printk("RAM starting at 0x%x is not contiguous\n",
- phys_mem.regions[1].address);
- printk("Using RAM from 0 to 0x%lx\n", total-1);
- }
-
- return total;
-}
-
-void __init
-chrp_init(unsigned long r3, unsigned long r4, unsigned long r5,
- unsigned long r6, unsigned long r7)
-{
- struct device_node *root = find_path_device ("/");
- char *machine = NULL;
-
-#ifdef CONFIG_BLK_DEV_INITRD
- /* take care of initrd if we have one */
- if ( r6 )
- {
- initrd_start = r6 + KERNELBASE;
- initrd_end = r6 + r7 + KERNELBASE;
- }
-#endif /* CONFIG_BLK_DEV_INITRD */
-
- ISA_DMA_THRESHOLD = ~0L;
- DMA_MODE_READ = 0x44;
- DMA_MODE_WRITE = 0x48;
- isa_io_base = CHRP_ISA_IO_BASE; /* default value */
- ppc_do_canonicalize_irqs = 1;
-
- if (root)
- machine = get_property(root, "model", NULL);
- if (machine && strncmp(machine, "Pegasos", 7) == 0) {
- _chrp_type = _CHRP_Pegasos;
- } else if (machine && strncmp(machine, "IBM", 3) == 0) {
- _chrp_type = _CHRP_IBM;
- } else if (machine && strncmp(machine, "MOT", 3) == 0) {
- _chrp_type = _CHRP_Motorola;
- } else {
- /* Let's assume it is an IBM chrp if all else fails */
- _chrp_type = _CHRP_IBM;
- }
-
- ppc_md.setup_arch = chrp_setup_arch;
- ppc_md.show_percpuinfo = of_show_percpuinfo;
- ppc_md.show_cpuinfo = chrp_show_cpuinfo;
-
- ppc_md.init_IRQ = chrp_init_IRQ;
- if (_chrp_type == _CHRP_Pegasos)
- ppc_md.get_irq = i8259_irq;
- else
- ppc_md.get_irq = openpic_get_irq;
-
- ppc_md.init = chrp_init2;
-
- ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot;
-
- ppc_md.restart = chrp_restart;
- ppc_md.power_off = chrp_power_off;
- ppc_md.halt = chrp_halt;
-
- ppc_md.time_init = chrp_time_init;
- ppc_md.set_rtc_time = chrp_set_rtc_time;
- ppc_md.get_rtc_time = chrp_get_rtc_time;
- ppc_md.calibrate_decr = chrp_calibrate_decr;
-
- ppc_md.find_end_of_memory = chrp_find_end_of_memory;
-
- if (rtas_data) {
- struct device_node *rtas;
- unsigned int *p;
-
- rtas = find_devices("rtas");
- if (rtas != NULL) {
- if (get_property(rtas, "display-character", NULL)) {
- ppc_md.progress = rtas_display_progress;
- p = (unsigned int *) get_property
- (rtas, "ibm,display-line-length", NULL);
- if (p)
- max_width = *p;
- } else if (get_property(rtas, "set-indicator", NULL))
- ppc_md.progress = rtas_indicator_progress;
- }
- }
-#ifdef CONFIG_BOOTX_TEXT
- if (ppc_md.progress == NULL && boot_text_mapped)
- ppc_md.progress = btext_progress;
-#endif
-
-#ifdef CONFIG_SMP
- smp_ops = &chrp_smp_ops;
-#endif /* CONFIG_SMP */
-
- /*
- * Print the banner, then scroll down so boot progress
- * can be printed. -- Cort
- */
- if (ppc_md.progress) ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0x0);
-}
-
-void
-rtas_display_progress(char *s, unsigned short hex)
-{
- int width;
- char *os = s;
-
- if ( call_rtas( "display-character", 1, 1, NULL, '\r' ) )
- return;
-
- width = max_width;
- while ( *os )
- {
- if ( (*os == '\n') || (*os == '\r') )
- width = max_width;
- else
- width--;
- call_rtas( "display-character", 1, 1, NULL, *os++ );
- /* if we overwrite the screen length */
- if ( width == 0 )
- while ( (*os != 0) && (*os != '\n') && (*os != '\r') )
- os++;
- }
-
- /*while ( width-- > 0 )*/
- call_rtas( "display-character", 1, 1, NULL, ' ' );
-}
-
-void
-rtas_indicator_progress(char *s, unsigned short hex)
-{
- call_rtas("set-indicator", 3, 1, NULL, 6, 0, hex);
-}
-
-#ifdef CONFIG_BOOTX_TEXT
-void
-btext_progress(char *s, unsigned short hex)
-{
- prom_print(s);
- prom_print("\n");
-}
-#endif /* CONFIG_BOOTX_TEXT */