summaryrefslogtreecommitdiff
path: root/arch/ppc/syslib/hawk_common.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/syslib/hawk_common.c')
-rw-r--r--arch/ppc/syslib/hawk_common.c317
1 files changed, 0 insertions, 317 deletions
diff --git a/arch/ppc/syslib/hawk_common.c b/arch/ppc/syslib/hawk_common.c
deleted file mode 100644
index 86821d8753ed..000000000000
--- a/arch/ppc/syslib/hawk_common.c
+++ /dev/null
@@ -1,317 +0,0 @@
-/*
- * Common Motorola PowerPlus Platform--really Falcon/Raven or HAWK.
- *
- * Author: Mark A. Greer
- * mgreer@mvista.com
- *
- * 2001 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/pci.h>
-#include <asm/pci-bridge.h>
-#include <asm/open_pic.h>
-#include <asm/hawk.h>
-
-/*
- * The Falcon/Raven and HAWK has 4 sets of registers:
- * 1) PPC Registers which define the mappings from PPC bus to PCI bus,
- * etc.
- * 2) PCI Registers which define the mappings from PCI bus to PPC bus and the
- * MPIC base address.
- * 3) MPIC registers.
- * 4) System Memory Controller (SMC) registers.
- */
-
-/*
- * Initialize the Motorola MCG Raven or HAWK host bridge.
- *
- * This means setting up the PPC bus to PCI memory and I/O space mappings,
- * setting the PCI memory space address of the MPIC (mapped straight
- * through), and ioremap'ing the mpic registers.
- * This routine will set the PCI_CONFIG_ADDR or PCI_CONFIG_DATA
- * addresses based on the PCI I/O address that is passed in.
- * 'OpenPIC_Addr' will be set correctly by this routine.
- */
-int __init
-hawk_init(struct pci_controller *hose,
- uint ppc_reg_base,
- ulong processor_pci_mem_start,
- ulong processor_pci_mem_end,
- ulong processor_pci_io_start,
- ulong processor_pci_io_end,
- ulong processor_mpic_base)
-{
- uint addr, offset;
-
- /*
- * Some sanity checks...
- */
- if (((processor_pci_mem_start&0xffff0000) != processor_pci_mem_start) ||
- ((processor_pci_io_start &0xffff0000) != processor_pci_io_start)) {
- printk("hawk_init: %s\n",
- "PPC to PCI mappings must start on 64 KB boundaries");
- return -1;
- }
-
- if (((processor_pci_mem_end &0x0000ffff) != 0x0000ffff) ||
- ((processor_pci_io_end &0x0000ffff) != 0x0000ffff)) {
- printk("hawk_init: PPC to PCI mappings %s\n",
- "must end just before a 64 KB boundaries");
- return -1;
- }
-
- if (((processor_pci_mem_end - processor_pci_mem_start) !=
- (hose->mem_space.end - hose->mem_space.start)) ||
- ((processor_pci_io_end - processor_pci_io_start) !=
- (hose->io_space.end - hose->io_space.start))) {
- printk("hawk_init: %s\n",
- "PPC and PCI memory or I/O space sizes don't match");
- return -1;
- }
-
- if ((processor_mpic_base & 0xfffc0000) != processor_mpic_base) {
- printk("hawk_init: %s\n",
- "MPIC address must start on 256 MB boundary");
- return -1;
- }
-
- if ((pci_dram_offset & 0xffff0000) != pci_dram_offset) {
- printk("hawk_init: %s\n",
- "pci_dram_offset must be multiple of 64 KB");
- return -1;
- }
-
- /*
- * Disable previous PPC->PCI mappings.
- */
- out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF0_OFF), 0x00000000);
- out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF1_OFF), 0x00000000);
- out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF2_OFF), 0x00000000);
- out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF3_OFF), 0x00000000);
-
- /*
- * Program the XSADD/XSOFF registers to set up the PCI Mem & I/O
- * space mappings. These are the mappings going from the processor to
- * the PCI bus.
- *
- * Note: Don't need to 'AND' start/end addresses with 0xffff0000
- * because sanity check above ensures that they are properly
- * aligned.
- */
-
- /* Set up PPC->PCI Mem mapping */
- addr = processor_pci_mem_start | (processor_pci_mem_end >> 16);
- offset = (hose->mem_space.start - processor_pci_mem_start) | 0xd2;
- out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSADD0_OFF), addr);
- out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF0_OFF), offset);
-
- /* Set up PPC->MPIC mapping on the bridge */
- addr = processor_mpic_base |
- (((processor_mpic_base + HAWK_MPIC_SIZE) >> 16) - 1);
- /* No write posting for this PCI Mem space */
- offset = (hose->mem_space.start - processor_pci_mem_start) | 0xc2;
-
- out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSADD1_OFF), addr);
- out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF1_OFF), offset);
-
- /* Set up PPC->PCI I/O mapping -- Contiguous I/O space */
- addr = processor_pci_io_start | (processor_pci_io_end >> 16);
- offset = (hose->io_space.start - processor_pci_io_start) | 0xc0;
- out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSADD3_OFF), addr);
- out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF3_OFF), offset);
-
- hose->io_base_virt = (void *)ioremap(processor_pci_io_start,
- (processor_pci_io_end - processor_pci_io_start + 1));
-
- /*
- * Set up the indirect method of accessing PCI config space.
- * The PCI config addr/data pair based on start addr of PCI I/O space.
- */
- setup_indirect_pci(hose,
- processor_pci_io_start + HAWK_PCI_CONFIG_ADDR_OFF,
- processor_pci_io_start + HAWK_PCI_CONFIG_DATA_OFF);
-
- /*
- * Disable previous PCI->PPC mappings.
- */
-
- /* XXXX Put in mappings from PCI bus to processor bus XXXX */
-
- /*
- * Disable MPIC response to PCI I/O space (BAR 0).
- * Make MPIC respond to PCI Mem space at specified address.
- * (BAR 1).
- */
- early_write_config_dword(hose,
- 0,
- PCI_DEVFN(0,0),
- PCI_BASE_ADDRESS_0,
- 0x00000000 | 0x1);
-
- early_write_config_dword(hose,
- 0,
- PCI_DEVFN(0,0),
- PCI_BASE_ADDRESS_1,
- (processor_mpic_base -
- processor_pci_mem_start +
- hose->mem_space.start) | 0x0);
-
- /* Map MPIC into virtual memory */
- OpenPIC_Addr = ioremap(processor_mpic_base, HAWK_MPIC_SIZE);
-
- return 0;
-}
-
-/*
- * Find the amount of RAM present.
- * This assumes that PPCBug has initialized the memory controller (SMC)
- * on the Falcon/HAWK correctly (i.e., it does no sanity checking).
- * It also assumes that the memory base registers are set to configure the
- * memory as contiguous starting with "RAM A BASE", "RAM B BASE", etc.
- * however, RAM base registers can be skipped (e.g. A, B, C are set,
- * D is skipped but E is set is okay).
- */
-#define MB (1024*1024)
-
-static uint reg_offset_table[] __initdata = {
- HAWK_SMC_RAM_A_SIZE_REG_OFF,
- HAWK_SMC_RAM_B_SIZE_REG_OFF,
- HAWK_SMC_RAM_C_SIZE_REG_OFF,
- HAWK_SMC_RAM_D_SIZE_REG_OFF,
- HAWK_SMC_RAM_E_SIZE_REG_OFF,
- HAWK_SMC_RAM_F_SIZE_REG_OFF,
- HAWK_SMC_RAM_G_SIZE_REG_OFF,
- HAWK_SMC_RAM_H_SIZE_REG_OFF
-};
-
-static uint falcon_size_table[] __initdata = {
- 0 * MB, /* 0 ==> 0 MB */
- 16 * MB, /* 1 ==> 16 MB */
- 32 * MB, /* 2 ==> 32 MB */
- 64 * MB, /* 3 ==> 64 MB */
- 128 * MB, /* 4 ==> 128 MB */
- 256 * MB, /* 5 ==> 256 MB */
- 1024 * MB, /* 6 ==> 1024 MB (1 GB) */
-};
-
-static uint hawk_size_table[] __initdata = {
- 0 * MB, /* 0 ==> 0 MB */
- 32 * MB, /* 1 ==> 32 MB */
- 64 * MB, /* 2 ==> 64 MB */
- 64 * MB, /* 3 ==> 64 MB */
- 128 * MB, /* 4 ==> 128 MB */
- 128 * MB, /* 5 ==> 128 MB */
- 128 * MB, /* 6 ==> 128 MB */
- 256 * MB, /* 7 ==> 256 MB */
- 256 * MB, /* 8 ==> 256 MB */
- 512 * MB, /* 9 ==> 512 MB */
-};
-
-/*
- * *** WARNING: You MUST have a BAT set up to map in the SMC regs ***
- *
- * Read the memory controller's registers to determine the amount of system
- * memory. Assumes that the memory controller registers are already mapped
- * into virtual memory--too early to use ioremap().
- */
-unsigned long __init
-hawk_get_mem_size(uint smc_base)
-{
- unsigned long total;
- int i, size_table_entries, reg_limit;
- uint vend_dev_id;
- uint *size_table;
- u_char val;
-
-
- vend_dev_id = in_be32((uint *)smc_base + PCI_VENDOR_ID);
-
- if (((vend_dev_id & 0xffff0000) >> 16) != PCI_VENDOR_ID_MOTOROLA) {
- printk("hawk_get_mem_size: %s (0x%x)\n",
- "Not a Motorola Memory Controller", vend_dev_id);
- return 0;
- }
-
- vend_dev_id &= 0x0000ffff;
-
- if (vend_dev_id == PCI_DEVICE_ID_MOTOROLA_FALCON) {
- size_table = falcon_size_table;
- size_table_entries = sizeof(falcon_size_table) /
- sizeof(falcon_size_table[0]);
-
- reg_limit = FALCON_SMC_REG_COUNT;
- }
- else if (vend_dev_id == PCI_DEVICE_ID_MOTOROLA_HAWK) {
- size_table = hawk_size_table;
- size_table_entries = sizeof(hawk_size_table) /
- sizeof(hawk_size_table[0]);
- reg_limit = HAWK_SMC_REG_COUNT;
- }
- else {
- printk("hawk_get_mem_size: %s (0x%x)\n",
- "Not a Falcon or HAWK", vend_dev_id);
- return 0;
- }
-
- total = 0;
-
- /* Check every reg because PPCBug may skip some */
- for (i=0; i<reg_limit; i++) {
- val = in_8((u_char *)(smc_base + reg_offset_table[i]));
-
- if (val & 0x80) { /* If enabled */
- val &= 0x0f;
-
- /* Don't go past end of size_table */
- if (val < size_table_entries) {
- total += size_table[val];
- }
- else { /* Register not set correctly */
- break;
- }
- }
- }
-
- return total;
-}
-
-int __init
-hawk_mpic_init(unsigned int pci_mem_offset)
-{
- unsigned short devid;
- unsigned int pci_membase;
-
- /* Check the first PCI device to see if it is a Raven or Hawk. */
- early_read_config_word(0, 0, 0, PCI_DEVICE_ID, &devid);
-
- switch (devid) {
- case PCI_DEVICE_ID_MOTOROLA_RAVEN:
- case PCI_DEVICE_ID_MOTOROLA_HAWK:
- break;
- default:
- OpenPIC_Addr = NULL;
- return 1;
- }
-
- /* Read the memory base register. */
- early_read_config_dword(0, 0, 0, PCI_BASE_ADDRESS_1, &pci_membase);
-
- if (pci_membase == 0) {
- OpenPIC_Addr = NULL;
- return 1;
- }
-
- /* Map the MPIC registers to virtual memory. */
- OpenPIC_Addr = ioremap(pci_membase + pci_mem_offset, 0x22000);
-
- return 0;
-}