diff options
Diffstat (limited to 'arch/sh/Kconfig')
| -rw-r--r-- | arch/sh/Kconfig | 126 |
1 files changed, 84 insertions, 42 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index e7390dd0283d..586cd045e2db 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -15,6 +15,7 @@ config SUPERH select HAVE_IOREMAP_PROT if MMU select HAVE_ARCH_TRACEHOOK select HAVE_DMA_API_DEBUG + select RTC_LIB help The SuperH is a RISC processor targeted for use in embedded systems and consumer electronics; it was also used in the Sega Dreamcast @@ -74,14 +75,18 @@ config GENERIC_IOMAP bool config GENERIC_TIME - def_bool n + def_bool y config GENERIC_CLOCKEVENTS - def_bool n + def_bool y config GENERIC_CLOCKEVENTS_BROADCAST bool +config GENERIC_CMOS_UPDATE + def_bool y + depends on SH_SH03 || SH_DREAMCAST + config GENERIC_LOCKBREAK def_bool y depends on SMP && PREEMPT @@ -112,6 +117,12 @@ config SYS_SUPPORTS_PCI config SYS_SUPPORTS_CMT bool +config SYS_SUPPORTS_MTU2 + bool + +config SYS_SUPPORTS_TMU + bool + config STACKTRACE_SUPPORT def_bool y @@ -157,13 +168,14 @@ config CPU_SH3 bool select CPU_HAS_INTEVT select CPU_HAS_SR_RB + select SYS_SUPPORTS_TMU config CPU_SH4 bool select CPU_HAS_INTEVT select CPU_HAS_SR_RB - select CPU_HAS_PTEA if !CPU_SH4A || CPU_SHX2 select CPU_HAS_FPU if !CPU_SH4AL_DSP + select SYS_SUPPORTS_TMU config CPU_SH4A bool @@ -177,6 +189,7 @@ config CPU_SH4AL_DSP config CPU_SH5 bool select CPU_HAS_FPU + select SYS_SUPPORTS_TMU config CPU_SHX2 bool @@ -210,27 +223,32 @@ config CPU_SUBTYPE_SH7201 bool "Support SH7201 processor" select CPU_SH2A select CPU_HAS_FPU + select SYS_SUPPORTS_MTU2 config CPU_SUBTYPE_SH7203 bool "Support SH7203 processor" select CPU_SH2A select CPU_HAS_FPU select SYS_SUPPORTS_CMT + select SYS_SUPPORTS_MTU2 config CPU_SUBTYPE_SH7206 bool "Support SH7206 processor" select CPU_SH2A select SYS_SUPPORTS_CMT + select SYS_SUPPORTS_MTU2 config CPU_SUBTYPE_SH7263 bool "Support SH7263 processor" select CPU_SH2A select CPU_HAS_FPU select SYS_SUPPORTS_CMT + select SYS_SUPPORTS_MTU2 config CPU_SUBTYPE_MXG bool "Support MX-G processor" select CPU_SH2A + select SYS_SUPPORTS_MTU2 help Select MX-G if running on an R8A03022BG part. @@ -283,6 +301,7 @@ config CPU_SUBTYPE_SH7720 bool "Support SH7720 processor" select CPU_SH3 select CPU_HAS_DSP + select SYS_SUPPORTS_CMT help Select SH7720 if you have a SH3-DSP SH7720 CPU. @@ -290,6 +309,7 @@ config CPU_SUBTYPE_SH7721 bool "Support SH7721 processor" select CPU_SH3 select CPU_HAS_DSP + select SYS_SUPPORTS_CMT help Select SH7721 if you have a SH3-DSP SH7721 CPU. @@ -347,6 +367,16 @@ config CPU_SUBTYPE_SH7723 help Select SH7723 if you have an SH-MobileR2 CPU. +config CPU_SUBTYPE_SH7724 + bool "Support SH7724 processor" + select CPU_SH4A + select CPU_SHX2 + select ARCH_SHMOBILE + select ARCH_SPARSEMEM_ENABLE + select SYS_SUPPORTS_CMT + help + Select SH7724 if you have an SH-MobileR2R CPU. + config CPU_SUBTYPE_SH7763 bool "Support SH7763 processor" select CPU_SH4A @@ -442,48 +472,26 @@ source "arch/sh/boards/Kconfig" menu "Timer and clock configuration" -config SH_TMU - bool "TMU timer support" - depends on CPU_SH3 || CPU_SH4 +config SH_TIMER_TMU + bool "TMU timer driver" + depends on SYS_SUPPORTS_TMU default y - select GENERIC_TIME - select GENERIC_CLOCKEVENTS help - This enables the use of the TMU as the system timer. + This enables the build of the TMU timer driver. -config SH_CMT - bool "CMT timer support" - depends on SYS_SUPPORTS_CMT && CPU_SH2 +config SH_TIMER_CMT + bool "CMT timer driver" + depends on SYS_SUPPORTS_CMT default y help - This enables the use of the CMT as the system timer. + This enables build of the CMT timer driver. -# -# Support for the new-style CMT driver. This will replace SH_CMT -# once its other dependencies are merged. -# -config SH_TIMER_CMT - bool "CMT clockevents driver" - depends on SYS_SUPPORTS_CMT && !SH_CMT - select GENERIC_CLOCKEVENTS - -config SH_MTU2 - bool "MTU2 timer support" - depends on CPU_SH2A +config SH_TIMER_MTU2 + bool "MTU2 timer driver" + depends on SYS_SUPPORTS_MTU2 default y help - This enables the use of the MTU2 as the system timer. - -config SH_TIMER_IRQ - int - default "28" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 || \ - CPU_SUBTYPE_SH7763 - default "86" if CPU_SUBTYPE_SH7619 - default "140" if CPU_SUBTYPE_SH7206 - default "142" if CPU_SUBTYPE_SH7203 && SH_CMT - default "153" if CPU_SUBTYPE_SH7203 && SH_MTU2 - default "238" if CPU_SUBTYPE_MXG - default "16" + This enables build of the MTU2 timer driver. config SH_PCLK_FREQ int "Peripheral clock frequency (in Hz)" @@ -494,7 +502,7 @@ config SH_PCLK_FREQ CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \ CPU_SUBTYPE_SH7203 || CPU_SUBTYPE_SH7206 || \ CPU_SUBTYPE_SH7263 || CPU_SUBTYPE_MXG || \ - CPU_SUBTYPE_SH7786 + CPU_SUBTYPE_SH7786 || CPU_SUBTYPE_SH7724 default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R default "66000000" if CPU_SUBTYPE_SH4_202 default "50000000" @@ -503,6 +511,13 @@ config SH_PCLK_FREQ This is necessary for determining the reference clock value on platforms lacking an RTC. +config SH_CLK_CPG + def_bool y + +config SH_CLK_CPG_LEGACY + depends on SH_CLK_CPG + def_bool y if !CPU_SUBTYPE_SH7785 && !ARCH_SHMOBILE + config SH_CLK_MD int "CPU Mode Pin Setting" depends on CPU_SH2 @@ -663,27 +678,54 @@ config GUSA_RB LLSC, this should be more efficient than the other alternative of disabling interrupts around the atomic sequence. +config SPARSE_IRQ + bool "Support sparse irq numbering" + depends on EXPERIMENTAL + help + This enables support for sparse irqs. This is useful in general + as most CPUs have a fairly sparse array of IRQ vectors, which + the irq_desc then maps directly on to. Systems with a high + number of off-chip IRQs will want to treat this as + experimental until they have been independently verified. + + If you don't know what to do here, say N. + endmenu menu "Boot options" config ZERO_PAGE_OFFSET - hex "Zero page offset" - default "0x00004000" if SH_SH03 - default "0x00010000" if PAGE_SIZE_64KB + hex + default "0x00010000" if PAGE_SIZE_64KB || SH_RTS7751R2D || \ + SH_7751_SOLUTION_ENGINE + default "0x00004000" if PAGE_SIZE_16KB || SH_SH03 default "0x00002000" if PAGE_SIZE_8KB default "0x00001000" help This sets the default offset of zero page. config BOOT_LINK_OFFSET - hex "Link address offset for booting" + hex + default "0x00210000" if SH_SHMIN + default "0x00400000" if SH_CAYMAN + default "0x00810000" if SH_7780_SOLUTION_ENGINE + default "0x009e0000" if SH_TITAN + default "0x01800000" if SH_SDK7780 + default "0x02000000" if SH_EDOSK7760 default "0x00800000" help This option allows you to set the link address offset of the zImage. This can be useful if you are on a board which has a small amount of memory. +config ENTRY_OFFSET + hex + default "0x00001000" if PAGE_SIZE_4KB + default "0x00002000" if PAGE_SIZE_8KB + default "0x00004000" if PAGE_SIZE_16KB + default "0x00010000" if PAGE_SIZE_64KB + default "0x00000000" + config UBC_WAKEUP bool "Wakeup UBC on startup" depends on CPU_SH4 && !CPU_SH4A |