diff options
Diffstat (limited to 'arch/sh/boards/mach-microdev/fdc37c93xapm.c')
| -rw-r--r-- | arch/sh/boards/mach-microdev/fdc37c93xapm.c | 160 |
1 files changed, 160 insertions, 0 deletions
diff --git a/arch/sh/boards/mach-microdev/fdc37c93xapm.c b/arch/sh/boards/mach-microdev/fdc37c93xapm.c new file mode 100644 index 000000000000..458a7cf5fb46 --- /dev/null +++ b/arch/sh/boards/mach-microdev/fdc37c93xapm.c @@ -0,0 +1,160 @@ +/* + * + * Setup for the SMSC FDC37C93xAPM + * + * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com) + * Copyright (C) 2003, 2004 SuperH, Inc. + * Copyright (C) 2004, 2005 Paul Mundt + * + * SuperH SH4-202 MicroDev board support. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + */ +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/err.h> +#include <mach/microdev.h> + +#define SMSC_CONFIG_PORT_ADDR (0x3F0) +#define SMSC_INDEX_PORT_ADDR SMSC_CONFIG_PORT_ADDR +#define SMSC_DATA_PORT_ADDR (SMSC_INDEX_PORT_ADDR + 1) + +#define SMSC_ENTER_CONFIG_KEY 0x55 +#define SMSC_EXIT_CONFIG_KEY 0xaa + +#define SMCS_LOGICAL_DEV_INDEX 0x07 /* Logical Device Number */ +#define SMSC_DEVICE_ID_INDEX 0x20 /* Device ID */ +#define SMSC_DEVICE_REV_INDEX 0x21 /* Device Revision */ +#define SMSC_ACTIVATE_INDEX 0x30 /* Activate */ +#define SMSC_PRIMARY_BASE_INDEX 0x60 /* Primary Base Address */ +#define SMSC_SECONDARY_BASE_INDEX 0x62 /* Secondary Base Address */ +#define SMSC_PRIMARY_INT_INDEX 0x70 /* Primary Interrupt Select */ +#define SMSC_SECONDARY_INT_INDEX 0x72 /* Secondary Interrupt Select */ +#define SMSC_HDCS0_INDEX 0xf0 /* HDCS0 Address Decoder */ +#define SMSC_HDCS1_INDEX 0xf1 /* HDCS1 Address Decoder */ + +#define SMSC_IDE1_DEVICE 1 /* IDE #1 logical device */ +#define SMSC_IDE2_DEVICE 2 /* IDE #2 logical device */ +#define SMSC_PARALLEL_DEVICE 3 /* Parallel Port logical device */ +#define SMSC_SERIAL1_DEVICE 4 /* Serial #1 logical device */ +#define SMSC_SERIAL2_DEVICE 5 /* Serial #2 logical device */ +#define SMSC_KEYBOARD_DEVICE 7 /* Keyboard logical device */ +#define SMSC_CONFIG_REGISTERS 8 /* Configuration Registers (Aux I/O) */ + +#define SMSC_READ_INDEXED(index) ({ \ + outb((index), SMSC_INDEX_PORT_ADDR); \ + inb(SMSC_DATA_PORT_ADDR); }) +#define SMSC_WRITE_INDEXED(val, index) ({ \ + outb((index), SMSC_INDEX_PORT_ADDR); \ + outb((val), SMSC_DATA_PORT_ADDR); }) + +#define IDE1_PRIMARY_BASE 0x01f0 /* Task File Registe base for IDE #1 */ +#define IDE1_SECONDARY_BASE 0x03f6 /* Miscellaneous AT registers for IDE #1 */ +#define IDE2_PRIMARY_BASE 0x0170 /* Task File Registe base for IDE #2 */ +#define IDE2_SECONDARY_BASE 0x0376 /* Miscellaneous AT registers for IDE #2 */ + +#define SERIAL1_PRIMARY_BASE 0x03f8 +#define SERIAL2_PRIMARY_BASE 0x02f8 + +#define MSB(x) ( (x) >> 8 ) +#define LSB(x) ( (x) & 0xff ) + + /* General-Purpose base address on CPU-board FPGA */ +#define MICRODEV_FPGA_GP_BASE 0xa6100000ul + +static int __init smsc_superio_setup(void) +{ + + unsigned char devid, devrev; + + /* Initially the chip is in run state */ + /* Put it into configuration state */ + outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); + + /* Read device ID info */ + devid = SMSC_READ_INDEXED(SMSC_DEVICE_ID_INDEX); + devrev = SMSC_READ_INDEXED(SMSC_DEVICE_REV_INDEX); + + if ((devid == 0x30) && (devrev == 0x01)) + printk("SMSC FDC37C93xAPM SuperIO device detected\n"); + else + return -ENODEV; + + /* Select the keyboard device */ + SMSC_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX); + /* enable it */ + SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); + /* enable the interrupts */ + SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_KEYBOARD, SMSC_PRIMARY_INT_INDEX); + SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_MOUSE, SMSC_SECONDARY_INT_INDEX); + + /* Select the Serial #1 device */ + SMSC_WRITE_INDEXED(SMSC_SERIAL1_DEVICE, SMCS_LOGICAL_DEV_INDEX); + /* enable it */ + SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); + /* program with port addresses */ + SMSC_WRITE_INDEXED(MSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0); + SMSC_WRITE_INDEXED(LSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1); + SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX); + /* enable the interrupts */ + SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL1, SMSC_PRIMARY_INT_INDEX); + + /* Select the Serial #2 device */ + SMSC_WRITE_INDEXED(SMSC_SERIAL2_DEVICE, SMCS_LOGICAL_DEV_INDEX); + /* enable it */ + SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); + /* program with port addresses */ + SMSC_WRITE_INDEXED(MSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0); + SMSC_WRITE_INDEXED(LSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1); + SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX); + /* enable the interrupts */ + SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL2, SMSC_PRIMARY_INT_INDEX); + + /* Select the IDE#1 device */ + SMSC_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX); + /* enable it */ + SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); + /* program with port addresses */ + SMSC_WRITE_INDEXED(MSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0); + SMSC_WRITE_INDEXED(LSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1); + SMSC_WRITE_INDEXED(MSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0); + SMSC_WRITE_INDEXED(LSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1); + SMSC_WRITE_INDEXED(0x0c, SMSC_HDCS0_INDEX); + SMSC_WRITE_INDEXED(0x00, SMSC_HDCS1_INDEX); + /* select the interrupt */ + SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE1, SMSC_PRIMARY_INT_INDEX); + + /* Select the IDE#2 device */ + SMSC_WRITE_INDEXED(SMSC_IDE2_DEVICE, SMCS_LOGICAL_DEV_INDEX); + /* enable it */ + SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); + /* program with port addresses */ + SMSC_WRITE_INDEXED(MSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0); + SMSC_WRITE_INDEXED(LSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1); + SMSC_WRITE_INDEXED(MSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0); + SMSC_WRITE_INDEXED(LSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1); + /* select the interrupt */ + SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE2, SMSC_PRIMARY_INT_INDEX); + + /* Select the configuration registers */ + SMSC_WRITE_INDEXED(SMSC_CONFIG_REGISTERS, SMCS_LOGICAL_DEV_INDEX); + /* enable the appropriate GPIO pins for IDE functionality: + * bit[0] In/Out 1==input; 0==output + * bit[1] Polarity 1==invert; 0==no invert + * bit[2] Int Enb #1 1==Enable Combined IRQ #1; 0==disable + * bit[3:4] Function Select 00==original; 01==Alternate Function #1 + */ + SMSC_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */ + SMSC_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */ + SMSC_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */ + SMSC_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */ + SMSC_WRITE_INDEXED(0x08, 0xe8); /* GP20 = nIDE2_OE */ + + /* Exit the configuration state */ + outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); + + return 0; +} +device_initcall(smsc_superio_setup); |