diff options
Diffstat (limited to 'arch/sh/boards/snapgear/setup.c')
| -rw-r--r-- | arch/sh/boards/snapgear/setup.c | 216 |
1 files changed, 216 insertions, 0 deletions
diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/snapgear/setup.c new file mode 100644 index 000000000000..08fc98342a0b --- /dev/null +++ b/arch/sh/boards/snapgear/setup.c @@ -0,0 +1,216 @@ +/****************************************************************************/ +/* + * linux/arch/sh/boards/snapgear/setup.c + * + * Copyright (C) 2002 David McCullough <davidm@snapgear.com> + * Copyright (C) 2003 Paul Mundt <lethal@linux-sh.org> + * + * Based on files with the following comments: + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Modified for 7751 Solution Engine by + * Ian da Silva and Jeremy Siegel, 2001. + */ +/****************************************************************************/ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/timer.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/sched.h> + +#include <asm/machvec.h> +#include <asm/mach/io.h> +#include <asm/irq.h> +#include <asm/io.h> +#include <asm/cpu/timer.h> + +extern void (*board_time_init)(void); +extern void secureedge5410_rtc_init(void); +extern void pcibios_init(void); + +/****************************************************************************/ +/* + * EraseConfig handling functions + */ + +static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + volatile char dummy __attribute__((unused)) = * (volatile char *) 0xb8000000; + + printk("SnapGear: erase switch interrupt!\n"); + + return IRQ_HANDLED; +} + +static int __init eraseconfig_init(void) +{ + printk("SnapGear: EraseConfig init\n"); + /* Setup "EraseConfig" switch on external IRQ 0 */ + if (request_irq(IRL0_IRQ, eraseconfig_interrupt, SA_INTERRUPT, + "Erase Config", NULL)) + printk("SnapGear: failed to register IRQ%d for Reset witch\n", + IRL0_IRQ); + else + printk("SnapGear: registered EraseConfig switch on IRQ%d\n", + IRL0_IRQ); + return(0); +} + +module_init(eraseconfig_init); + +/****************************************************************************/ +/* + * Initialize IRQ setting + * + * IRL0 = erase switch + * IRL1 = eth0 + * IRL2 = eth1 + * IRL3 = crypto + */ + +static void __init init_snapgear_IRQ(void) +{ + /* enable individual interrupt mode for externals */ + ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR); + + printk("Setup SnapGear IRQ/IPR ...\n"); + + make_ipr_irq(IRL0_IRQ, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY); + make_ipr_irq(IRL1_IRQ, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY); + make_ipr_irq(IRL2_IRQ, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY); + make_ipr_irq(IRL3_IRQ, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY); +} + +/****************************************************************************/ +/* + * Fast poll interrupt simulator. + */ + +/* + * Leave all of the fast timer/fast poll stuff commented out for now, since + * it's not clear whether it actually works or not. Since it wasn't being used + * at all in 2.4, we'll assume it's not sane for 2.6 either.. -- PFM + */ +#if 0 +#define FAST_POLL 1000 +//#define FAST_POLL_INTR + +#define FASTTIMER_IRQ 17 +#define FASTTIMER_IPR_ADDR INTC_IPRA +#define FASTTIMER_IPR_POS 2 +#define FASTTIMER_PRIORITY 3 + +#ifdef FAST_POLL_INTR +#define TMU1_TCR_INIT 0x0020 +#else +#define TMU1_TCR_INIT 0 +#endif +#define TMU_TSTR_INIT 1 +#define TMU1_TCR_CALIB 0x0000 + + +#ifdef FAST_POLL_INTR +static void fast_timer_irq(int irq, void *dev_instance, struct pt_regs *regs) +{ + unsigned long timer_status; + timer_status = ctrl_inw(TMU1_TCR); + timer_status &= ~0x100; + ctrl_outw(timer_status, TMU1_TCR); +} +#endif + +/* + * return the current ticks on the fast timer + */ + +unsigned long fast_timer_count(void) +{ + return(ctrl_inl(TMU1_TCNT)); +} + +/* + * setup a fast timer for profiling etc etc + */ + +static void setup_fast_timer() +{ + unsigned long interval; + +#ifdef FAST_POLL_INTR + interval = (current_cpu_data.module_clock/4 + FAST_POLL/2) / FAST_POLL; + + make_ipr_irq(FASTTIMER_IRQ, FASTTIMER_IPR_ADDR, FASTTIMER_IPR_POS, + FASTTIMER_PRIORITY); + + printk("SnapGear: %dHz fast timer on IRQ %d\n",FAST_POLL,FASTTIMER_IRQ); + + if (request_irq(FASTTIMER_IRQ, fast_timer_irq, 0, "SnapGear fast timer", + NULL) != 0) + printk("%s(%d): request_irq() failed?\n", __FILE__, __LINE__); +#else + printk("SnapGear: fast timer running\n",FAST_POLL,FASTTIMER_IRQ); + interval = 0xffffffff; +#endif + + ctrl_outb(ctrl_inb(TMU_TSTR) & ~0x2, TMU_TSTR); /* disable timer 1 */ + ctrl_outw(TMU1_TCR_INIT, TMU1_TCR); + ctrl_outl(interval, TMU1_TCOR); + ctrl_outl(interval, TMU1_TCNT); + ctrl_outb(ctrl_inb(TMU_TSTR) | 0x2, TMU_TSTR); /* enable timer 1 */ + + printk("Timer count 1 = 0x%x\n", fast_timer_count()); + udelay(1000); + printk("Timer count 2 = 0x%x\n", fast_timer_count()); +} +#endif + +/****************************************************************************/ + +const char *get_system_type(void) +{ + return "SnapGear SecureEdge5410"; +} + +/* + * The Machine Vector + */ + +struct sh_machine_vector mv_snapgear __initmv = { + .mv_nr_irqs = 72, + + .mv_inb = snapgear_inb, + .mv_inw = snapgear_inw, + .mv_inl = snapgear_inl, + .mv_outb = snapgear_outb, + .mv_outw = snapgear_outw, + .mv_outl = snapgear_outl, + + .mv_inb_p = snapgear_inb_p, + .mv_inw_p = snapgear_inw, + .mv_inl_p = snapgear_inl, + .mv_outb_p = snapgear_outb_p, + .mv_outw_p = snapgear_outw, + .mv_outl_p = snapgear_outl, + + .mv_isa_port2addr = snapgear_isa_port2addr, + + .mv_init_irq = init_snapgear_IRQ, +}; +ALIAS_MV(snapgear) + +/* + * Initialize the board + */ + +int __init platform_setup(void) +{ + board_time_init = secureedge5410_rtc_init; + + return 0; +} + |