diff options
Diffstat (limited to 'arch/sh/boards')
| -rw-r--r-- | arch/sh/boards/board-ap325rxa.c | 64 | ||||
| -rw-r--r-- | arch/sh/boards/board-rsk7203.c | 44 | ||||
| -rw-r--r-- | arch/sh/boards/mach-highlander/Kconfig | 1 | ||||
| -rw-r--r-- | arch/sh/boards/mach-highlander/Makefile | 10 | ||||
| -rw-r--r-- | arch/sh/boards/mach-highlander/pinmux-r7785rp.c | 20 | ||||
| -rw-r--r-- | arch/sh/boards/mach-highlander/setup.c | 2 | ||||
| -rw-r--r-- | arch/sh/boards/mach-migor/setup.c | 18 |
7 files changed, 138 insertions, 21 deletions
diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c index 7c7874e6ac36..8881a643ac32 100644 --- a/arch/sh/boards/board-ap325rxa.c +++ b/arch/sh/boards/board-ap325rxa.c @@ -15,6 +15,7 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/mtd/physmap.h> +#include <linux/mtd/sh_flctl.h> #include <linux/delay.h> #include <linux/i2c.h> #include <linux/smc911x.h> @@ -108,10 +109,45 @@ static struct platform_device ap325rxa_nor_flash_device = { }, }; +static struct mtd_partition nand_partition_info[] = { + { + .name = "nand_data", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct resource nand_flash_resources[] = { + [0] = { + .start = 0xa4530000, + .end = 0xa45300ff, + .flags = IORESOURCE_MEM, + } +}; + +static struct sh_flctl_platform_data nand_flash_data = { + .parts = nand_partition_info, + .nr_parts = ARRAY_SIZE(nand_partition_info), + .flcmncr_val = FCKSEL_E | TYPESEL_SET | NANWF_E, + .has_hwecc = 1, +}; + +static struct platform_device nand_flash_device = { + .name = "sh_flctl", + .resource = nand_flash_resources, + .num_resources = ARRAY_SIZE(nand_flash_resources), + .dev = { + .platform_data = &nand_flash_data, + }, +}; + #define FPGA_LCDREG 0xB4100180 #define FPGA_BKLREG 0xB4100212 #define FPGA_LCDREG_VAL 0x0018 #define PORT_MSELCRB 0xA4050182 +#define PORT_HIZCRC 0xA405015C +#define PORT_DRVCRA 0xA405018A +#define PORT_DRVCRB 0xA405018C static void ap320_wvga_power_on(void *board_data) { @@ -282,6 +318,7 @@ static struct platform_device *ap325rxa_devices[] __initdata = { #ifdef CONFIG_I2C &camera_device, #endif + &nand_flash_device, }; static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = { @@ -364,21 +401,36 @@ static int __init ap325rxa_devices_setup(void) ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB); + /* FLCTL */ + gpio_request(GPIO_FN_FCE, NULL); + gpio_request(GPIO_FN_NAF7, NULL); + gpio_request(GPIO_FN_NAF6, NULL); + gpio_request(GPIO_FN_NAF5, NULL); + gpio_request(GPIO_FN_NAF4, NULL); + gpio_request(GPIO_FN_NAF3, NULL); + gpio_request(GPIO_FN_NAF2, NULL); + gpio_request(GPIO_FN_NAF1, NULL); + gpio_request(GPIO_FN_NAF0, NULL); + gpio_request(GPIO_FN_FCDE, NULL); + gpio_request(GPIO_FN_FOE, NULL); + gpio_request(GPIO_FN_FSC, NULL); + gpio_request(GPIO_FN_FWE, NULL); + gpio_request(GPIO_FN_FRB, NULL); + + ctrl_outw(0, PORT_HIZCRC); + ctrl_outw(0xFFFF, PORT_DRVCRA); + ctrl_outw(0xFFFF, PORT_DRVCRB); + platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20); i2c_register_board_info(0, ap325rxa_i2c_devices, ARRAY_SIZE(ap325rxa_i2c_devices)); - + return platform_add_devices(ap325rxa_devices, ARRAY_SIZE(ap325rxa_devices)); } device_initcall(ap325rxa_devices_setup); -static void __init ap325rxa_setup(char **cmdline_p) -{ -} - static struct sh_machine_vector mv_ap325rxa __initmv = { .mv_name = "AP-325RXA", - .mv_setup = ap325rxa_setup, }; diff --git a/arch/sh/boards/board-rsk7203.c b/arch/sh/boards/board-rsk7203.c index ded799cf3eae..58266f06134a 100644 --- a/arch/sh/boards/board-rsk7203.c +++ b/arch/sh/boards/board-rsk7203.c @@ -17,9 +17,10 @@ #include <linux/mtd/map.h> #include <linux/smc911x.h> #include <linux/gpio.h> +#include <linux/leds.h> #include <asm/machvec.h> #include <asm/io.h> -#include <asm/sh7203.h> +#include <cpu/sh7203.h> static struct smc911x_platdata smc911x_info = { .flags = SMC911X_USE_16BIT, @@ -116,10 +117,46 @@ static void __init set_mtd_partitions(void) } } +static struct gpio_led rsk7203_gpio_leds[] = { + { + .name = "green", + .gpio = GPIO_PE10, + .active_low = 1, + }, { + .name = "orange", + .default_trigger = "nand-disk", + .gpio = GPIO_PE12, + .active_low = 1, + }, { + .name = "red:timer", + .default_trigger = "timer", + .gpio = GPIO_PC14, + .active_low = 1, + }, { + .name = "red:heartbeat", + .default_trigger = "heartbeat", + .gpio = GPIO_PE11, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data rsk7203_gpio_leds_info = { + .leds = rsk7203_gpio_leds, + .num_leds = ARRAY_SIZE(rsk7203_gpio_leds), +}; + +static struct platform_device led_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &rsk7203_gpio_leds_info, + }, +}; static struct platform_device *rsk7203_devices[] __initdata = { &smc911x_device, &flash_device, + &led_device, }; static int __init rsk7203_devices_setup(void) @@ -128,11 +165,6 @@ static int __init rsk7203_devices_setup(void) gpio_request(GPIO_FN_TXD0, NULL); gpio_request(GPIO_FN_RXD0, NULL); - /* Lit LED0 */ - gpio_request(GPIO_PE10, NULL); - gpio_direction_output(GPIO_PE10, 0); - gpio_export(GPIO_PE10, 0); - set_mtd_partitions(); return platform_add_devices(rsk7203_devices, ARRAY_SIZE(rsk7203_devices)); diff --git a/arch/sh/boards/mach-highlander/Kconfig b/arch/sh/boards/mach-highlander/Kconfig index fc8f28e04ba3..08057f62687b 100644 --- a/arch/sh/boards/mach-highlander/Kconfig +++ b/arch/sh/boards/mach-highlander/Kconfig @@ -18,6 +18,7 @@ config SH_R7780MP config SH_R7785RP bool "R7785RP board support" depends on CPU_SUBTYPE_SH7785 + select GENERIC_GPIO endchoice diff --git a/arch/sh/boards/mach-highlander/Makefile b/arch/sh/boards/mach-highlander/Makefile index 20a10080b11f..d93aaf880134 100644 --- a/arch/sh/boards/mach-highlander/Makefile +++ b/arch/sh/boards/mach-highlander/Makefile @@ -1,10 +1,10 @@ # -# Makefile for the R7780RP-1 specific parts of the kernel +# Makefile for the Highlander specific parts of the kernel # -irqinit-$(CONFIG_SH_R7780MP) := irq-r7780mp.o -irqinit-$(CONFIG_SH_R7785RP) := irq-r7785rp.o -irqinit-$(CONFIG_SH_R7780RP) := irq-r7780rp.o -obj-y := setup.o $(irqinit-y) +obj-y := setup.o +obj-$(CONFIG_SH_R7780RP) += irq-r7780rp.o +obj-$(CONFIG_SH_R7780MP) += irq-r7780mp.o +obj-$(CONFIG_SH_R7785RP) += irq-r7785rp.o pinmux-r7785rp.o ifneq ($(CONFIG_SH_R7785RP),y) obj-$(CONFIG_PUSH_SWITCH) += psw.o diff --git a/arch/sh/boards/mach-highlander/pinmux-r7785rp.c b/arch/sh/boards/mach-highlander/pinmux-r7785rp.c new file mode 100644 index 000000000000..c77a2bea8f2a --- /dev/null +++ b/arch/sh/boards/mach-highlander/pinmux-r7785rp.c @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2008 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/gpio.h> +#include <cpu/sh7785.h> + +void __init highlander_plat_pinmux_setup(void) +{ + /* SCIF0 */ + gpio_request(GPIO_FN_SCIF0_CTS, NULL); + gpio_request(GPIO_FN_SCIF0_RTS, NULL); + gpio_request(GPIO_FN_SCIF0_SCK, NULL); + gpio_request(GPIO_FN_SCIF0_RXD, NULL); + gpio_request(GPIO_FN_SCIF0_TXD, NULL); +} diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c index c5a40f7906d7..806438b42cac 100644 --- a/arch/sh/boards/mach-highlander/setup.c +++ b/arch/sh/boards/mach-highlander/setup.c @@ -294,6 +294,8 @@ static void __init highlander_setup(char **cmdline_p) (ver >> 12) & 0xf, (ver >> 8) & 0xf, (ver >> 4) & 0xf, ver & 0xf); + highlander_plat_pinmux_setup(); + /* * Enable the important clocks right away.. */ diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c index 769d63043424..975281980299 100644 --- a/arch/sh/boards/mach-migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c @@ -288,8 +288,11 @@ static struct clk *camera_clk; static void camera_power_on(void) { + /* Use 10 MHz VIO_CKO instead of 24 MHz to work + * around signal quality issues on Panel Board V2.1. + */ camera_clk = clk_get(NULL, "video_clk"); - clk_set_rate(camera_clk, 24000000); + clk_set_rate(camera_clk, 10000000); clk_enable(camera_clk); /* start VIO_CKO */ /* use VIO_RST to take camera out of reset */ @@ -307,10 +310,18 @@ static void camera_power_off(void) gpio_set_value(GPIO_PTT3, 0); } +static void camera_power(int mode) +{ + if (mode) + camera_power_on(); + else + camera_power_off(); +} + #ifdef CONFIG_I2C static unsigned char camera_ov772x_magic[] = { - 0x09, 0x01, 0x0c, 0x10, 0x0d, 0x41, 0x0e, 0x01, + 0x09, 0x01, 0x0c, 0x20, 0x0d, 0x41, 0x0e, 0x01, 0x12, 0x00, 0x13, 0x8F, 0x14, 0x4A, 0x15, 0x00, 0x16, 0x00, 0x17, 0x23, 0x18, 0xa0, 0x19, 0x07, 0x1a, 0xf0, 0x1b, 0x40, 0x1f, 0x00, 0x20, 0x10, @@ -386,6 +397,7 @@ static struct soc_camera_platform_info ov772x_info = { }, .bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8, + .power = camera_power, .set_capture = ov772x_set_capture, }; @@ -400,8 +412,6 @@ static struct platform_device migor_camera_device = { static struct sh_mobile_ceu_info sh_mobile_ceu_info = { .flags = SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_PCLK_SAMPLE_RISING \ | SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH, - .enable_camera = camera_power_on, - .disable_camera = camera_power_off, }; static struct resource migor_ceu_resources[] = { |