summaryrefslogtreecommitdiff
path: root/arch/sparc
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sparc')
-rw-r--r--arch/sparc/kernel/entry.S27
-rw-r--r--arch/sparc/kernel/head_32.S45
-rw-r--r--arch/sparc/kernel/kernel.h3
-rw-r--r--arch/sparc/kernel/module.c21
-rw-r--r--arch/sparc/kernel/muldiv.c238
-rw-r--r--arch/sparc/kernel/traps_32.c2
-rw-r--r--arch/sparc/lib/Makefile2
-rw-r--r--arch/sparc/lib/divdi3.S4
-rw-r--r--arch/sparc/lib/ksyms.c17
-rw-r--r--arch/sparc/lib/mul.S137
-rw-r--r--arch/sparc/lib/muldi3.S4
-rw-r--r--arch/sparc/lib/rem.S384
-rw-r--r--arch/sparc/lib/sdiv.S381
-rw-r--r--arch/sparc/lib/udiv.S357
-rw-r--r--arch/sparc/lib/udivdi3.S3
-rw-r--r--arch/sparc/lib/umul.S171
-rw-r--r--arch/sparc/lib/urem.S357
17 files changed, 24 insertions, 2129 deletions
diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S
index 773f3f05bf26..3f3976e0e98f 100644
--- a/arch/sparc/kernel/entry.S
+++ b/arch/sparc/kernel/entry.S
@@ -1161,11 +1161,13 @@ fpload:
.globl __ndelay
__ndelay:
save %sp, -STACKFRAME_SZ, %sp
- mov %i0, %o0
- call .umul ! round multiplier up so large ns ok
- mov 0x1ae, %o1 ! 2**32 / (1 000 000 000 / HZ)
- call .umul
- mov %i1, %o1 ! udelay_val
+ mov %i0, %o0 ! round multiplier up so large ns ok
+ mov 0x1ae, %o1 ! 2**32 / (1 000 000 000 / HZ)
+ umul %o0, %o1, %o0
+ rd %y, %o1
+ mov %i1, %o1 ! udelay_val
+ umul %o0, %o1, %o0
+ rd %y, %o1
ba delay_continue
mov %o1, %o0 ! >>32 later for better resolution
@@ -1174,18 +1176,21 @@ __udelay:
save %sp, -STACKFRAME_SZ, %sp
mov %i0, %o0
sethi %hi(0x10c7), %o1 ! round multiplier up so large us ok
- call .umul
- or %o1, %lo(0x10c7), %o1 ! 2**32 / 1 000 000
- call .umul
- mov %i1, %o1 ! udelay_val
+ or %o1, %lo(0x10c7), %o1 ! 2**32 / 1 000 000
+ umul %o0, %o1, %o0
+ rd %y, %o1
+ mov %i1, %o1 ! udelay_val
+ umul %o0, %o1, %o0
+ rd %y, %o1
sethi %hi(0x028f4b62), %l0 ! Add in rounding constant * 2**32,
or %g0, %lo(0x028f4b62), %l0
addcc %o0, %l0, %o0 ! 2**32 * 0.009 999
bcs,a 3f
add %o1, 0x01, %o1
3:
- call .umul
- mov HZ, %o0 ! >>32 earlier for wider range
+ mov HZ, %o0 ! >>32 earlier for wider range
+ umul %o0, %o1, %o0
+ rd %y, %o1
delay_continue:
cmp %o0, 0x0
diff --git a/arch/sparc/kernel/head_32.S b/arch/sparc/kernel/head_32.S
index 6c95e9ff8718..69645cac54bd 100644
--- a/arch/sparc/kernel/head_32.S
+++ b/arch/sparc/kernel/head_32.S
@@ -746,51 +746,6 @@ sun4d_init:
/* Fall through to sun4m_init */
sun4m_init:
-
-#define PATCH_IT(dst, src) \
- set (dst), %g5; \
- set (src), %g4; \
- ld [%g4], %g3; \
- st %g3, [%g5]; \
- ld [%g4+0x4], %g3; \
- st %g3, [%g5+0x4];
-
- /* Signed multiply. */
- PATCH_IT(.mul, .mul_patch)
- PATCH_IT(.mul+0x08, .mul_patch+0x08)
-
- /* Signed remainder. */
- PATCH_IT(.rem, .rem_patch)
- PATCH_IT(.rem+0x08, .rem_patch+0x08)
- PATCH_IT(.rem+0x10, .rem_patch+0x10)
- PATCH_IT(.rem+0x18, .rem_patch+0x18)
- PATCH_IT(.rem+0x20, .rem_patch+0x20)
- PATCH_IT(.rem+0x28, .rem_patch+0x28)
-
- /* Signed division. */
- PATCH_IT(.div, .div_patch)
- PATCH_IT(.div+0x08, .div_patch+0x08)
- PATCH_IT(.div+0x10, .div_patch+0x10)
- PATCH_IT(.div+0x18, .div_patch+0x18)
- PATCH_IT(.div+0x20, .div_patch+0x20)
-
- /* Unsigned multiply. */
- PATCH_IT(.umul, .umul_patch)
- PATCH_IT(.umul+0x08, .umul_patch+0x08)
-
- /* Unsigned remainder. */
- PATCH_IT(.urem, .urem_patch)
- PATCH_IT(.urem+0x08, .urem_patch+0x08)
- PATCH_IT(.urem+0x10, .urem_patch+0x10)
- PATCH_IT(.urem+0x18, .urem_patch+0x18)
-
- /* Unsigned division. */
- PATCH_IT(.udiv, .udiv_patch)
- PATCH_IT(.udiv+0x08, .udiv_patch+0x08)
- PATCH_IT(.udiv+0x10, .udiv_patch+0x10)
-
-#undef PATCH_IT
-
/* Ok, the PROM could have done funny things and apple cider could still
* be sitting in the fault status/address registers. Read them all to
* clear them so we don't get magic faults later on.
diff --git a/arch/sparc/kernel/kernel.h b/arch/sparc/kernel/kernel.h
index 1c1a7d39c7e1..a86372d34587 100644
--- a/arch/sparc/kernel/kernel.h
+++ b/arch/sparc/kernel/kernel.h
@@ -32,9 +32,6 @@ extern void cpu_probe(void);
/* traps_32.c */
extern void handle_hw_divzero(struct pt_regs *regs, unsigned long pc,
unsigned long npc, unsigned long psr);
-/* muldiv.c */
-extern int do_user_muldiv (struct pt_regs *, unsigned long);
-
/* irq_32.c */
extern struct irqaction static_irqaction[];
extern int static_irq_count;
diff --git a/arch/sparc/kernel/module.c b/arch/sparc/kernel/module.c
index 276359e1ff56..15e0a1693976 100644
--- a/arch/sparc/kernel/module.c
+++ b/arch/sparc/kernel/module.c
@@ -32,26 +32,11 @@ static void *module_map(unsigned long size)
GFP_KERNEL, PAGE_KERNEL, -1,
__builtin_return_address(0));
}
-
-static char *dot2underscore(char *name)
-{
- return name;
-}
#else
static void *module_map(unsigned long size)
{
return vmalloc(size);
}
-
-/* Replace references to .func with _Func */
-static char *dot2underscore(char *name)
-{
- if (name[0] == '.') {
- name[0] = '_';
- name[1] = toupper(name[1]);
- }
- return name;
-}
#endif /* CONFIG_SPARC64 */
void *module_alloc(unsigned long size)
@@ -93,12 +78,8 @@ int module_frob_arch_sections(Elf_Ehdr *hdr,
for (i = 1; i < sechdrs[symidx].sh_size / sizeof(Elf_Sym); i++) {
if (sym[i].st_shndx == SHN_UNDEF) {
- if (ELF_ST_TYPE(sym[i].st_info) == STT_REGISTER) {
+ if (ELF_ST_TYPE(sym[i].st_info) == STT_REGISTER)
sym[i].st_shndx = SHN_ABS;
- } else {
- char *name = strtab + sym[i].st_name;
- dot2underscore(name);
- }
}
}
return 0;
diff --git a/arch/sparc/kernel/muldiv.c b/arch/sparc/kernel/muldiv.c
deleted file mode 100644
index f7db516b07d8..000000000000
--- a/arch/sparc/kernel/muldiv.c
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- * muldiv.c: Hardware multiply/division illegal instruction trap
- * for sun4c/sun4 (which do not have those instructions)
- *
- * Copyright (C) 1996 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
- *
- * 2004-12-25 Krzysztof Helt (krzysztof.h1@wp.pl)
- * - fixed registers constrains in inline assembly declarations
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-#include <asm/uaccess.h>
-
-#include "kernel.h"
-
-/* #define DEBUG_MULDIV */
-
-static inline int has_imm13(int insn)
-{
- return (insn & 0x2000);
-}
-
-static inline int is_foocc(int insn)
-{
- return (insn & 0x800000);
-}
-
-static inline int sign_extend_imm13(int imm)
-{
- return imm << 19 >> 19;
-}
-
-static inline void advance(struct pt_regs *regs)
-{
- regs->pc = regs->npc;
- regs->npc += 4;
-}
-
-static inline void maybe_flush_windows(unsigned int rs1, unsigned int rs2,
- unsigned int rd)
-{
- if(rs2 >= 16 || rs1 >= 16 || rd >= 16) {
- /* Wheee... */
- __asm__ __volatile__("save %sp, -0x40, %sp\n\t"
- "save %sp, -0x40, %sp\n\t"
- "save %sp, -0x40, %sp\n\t"
- "save %sp, -0x40, %sp\n\t"
- "save %sp, -0x40, %sp\n\t"
- "save %sp, -0x40, %sp\n\t"
- "save %sp, -0x40, %sp\n\t"
- "restore; restore; restore; restore;\n\t"
- "restore; restore; restore;\n\t");
- }
-}
-
-#define fetch_reg(reg, regs) ({ \
- struct reg_window32 __user *win; \
- register unsigned long ret; \
- \
- if (!(reg)) ret = 0; \
- else if ((reg) < 16) { \
- ret = regs->u_regs[(reg)]; \
- } else { \
- /* Ho hum, the slightly complicated case. */ \
- win = (struct reg_window32 __user *)regs->u_regs[UREG_FP];\
- if (get_user (ret, &win->locals[(reg) - 16])) return -1;\
- } \
- ret; \
-})
-
-static inline int
-store_reg(unsigned int result, unsigned int reg, struct pt_regs *regs)
-{
- struct reg_window32 __user *win;
-
- if (!reg)
- return 0;
- if (reg < 16) {
- regs->u_regs[reg] = result;
- return 0;
- } else {
- /* need to use put_user() in this case: */
- win = (struct reg_window32 __user *) regs->u_regs[UREG_FP];
- return (put_user(result, &win->locals[reg - 16]));
- }
-}
-
-/* Should return 0 if mul/div emulation succeeded and SIGILL should
- * not be issued.
- */
-int do_user_muldiv(struct pt_regs *regs, unsigned long pc)
-{
- unsigned int insn;
- int inst;
- unsigned int rs1, rs2, rdv;
-
- if (!pc)
- return -1; /* This happens to often, I think */
- if (get_user (insn, (unsigned int __user *)pc))
- return -1;
- if ((insn & 0xc1400000) != 0x80400000)
- return -1;
- inst = ((insn >> 19) & 0xf);
- if ((inst & 0xe) != 10 && (inst & 0xe) != 14)
- return -1;
-
- /* Now we know we have to do something with umul, smul, udiv or sdiv */
- rs1 = (insn >> 14) & 0x1f;
- rs2 = insn & 0x1f;
- rdv = (insn >> 25) & 0x1f;
- if (has_imm13(insn)) {
- maybe_flush_windows(rs1, 0, rdv);
- rs2 = sign_extend_imm13(insn);
- } else {
- maybe_flush_windows(rs1, rs2, rdv);
- rs2 = fetch_reg(rs2, regs);
- }
- rs1 = fetch_reg(rs1, regs);
- switch (inst) {
- case 10: /* umul */
-#ifdef DEBUG_MULDIV
- printk ("unsigned muldiv: 0x%x * 0x%x = ", rs1, rs2);
-#endif
- __asm__ __volatile__ ("\n\t"
- "mov %0, %%o0\n\t"
- "call .umul\n\t"
- " mov %1, %%o1\n\t"
- "mov %%o0, %0\n\t"
- "mov %%o1, %1\n\t"
- : "=r" (rs1), "=r" (rs2)
- : "0" (rs1), "1" (rs2)
- : "o0", "o1", "o2", "o3", "o4", "o5", "o7", "cc");
-#ifdef DEBUG_MULDIV
- printk ("0x%x%08x\n", rs2, rs1);
-#endif
- if (store_reg(rs1, rdv, regs))
- return -1;
- regs->y = rs2;
- break;
- case 11: /* smul */
-#ifdef DEBUG_MULDIV
- printk ("signed muldiv: 0x%x * 0x%x = ", rs1, rs2);
-#endif
- __asm__ __volatile__ ("\n\t"
- "mov %0, %%o0\n\t"
- "call .mul\n\t"
- " mov %1, %%o1\n\t"
- "mov %%o0, %0\n\t"
- "mov %%o1, %1\n\t"
- : "=r" (rs1), "=r" (rs2)
- : "0" (rs1), "1" (rs2)
- : "o0", "o1", "o2", "o3", "o4", "o5", "o7", "cc");
-#ifdef DEBUG_MULDIV
- printk ("0x%x%08x\n", rs2, rs1);
-#endif
- if (store_reg(rs1, rdv, regs))
- return -1;
- regs->y = rs2;
- break;
- case 14: /* udiv */
-#ifdef DEBUG_MULDIV
- printk ("unsigned muldiv: 0x%x%08x / 0x%x = ", regs->y, rs1, rs2);
-#endif
- if (!rs2) {
-#ifdef DEBUG_MULDIV
- printk ("DIVISION BY ZERO\n");
-#endif
- handle_hw_divzero (regs, pc, regs->npc, regs->psr);
- return 0;
- }
- __asm__ __volatile__ ("\n\t"
- "mov %2, %%o0\n\t"
- "mov %0, %%o1\n\t"
- "mov %%g0, %%o2\n\t"
- "call __udivdi3\n\t"
- " mov %1, %%o3\n\t"
- "mov %%o1, %0\n\t"
- "mov %%o0, %1\n\t"
- : "=r" (rs1), "=r" (rs2)
- : "r" (regs->y), "0" (rs1), "1" (rs2)
- : "o0", "o1", "o2", "o3", "o4", "o5", "o7",
- "g1", "g2", "g3", "cc");
-#ifdef DEBUG_MULDIV
- printk ("0x%x\n", rs1);
-#endif
- if (store_reg(rs1, rdv, regs))
- return -1;
- break;
- case 15: /* sdiv */
-#ifdef DEBUG_MULDIV
- printk ("signed muldiv: 0x%x%08x / 0x%x = ", regs->y, rs1, rs2);
-#endif
- if (!rs2) {
-#ifdef DEBUG_MULDIV
- printk ("DIVISION BY ZERO\n");
-#endif
- handle_hw_divzero (regs, pc, regs->npc, regs->psr);
- return 0;
- }
- __asm__ __volatile__ ("\n\t"
- "mov %2, %%o0\n\t"
- "mov %0, %%o1\n\t"
- "mov %%g0, %%o2\n\t"
- "call __divdi3\n\t"
- " mov %1, %%o3\n\t"
- "mov %%o1, %0\n\t"
- "mov %%o0, %1\n\t"
- : "=r" (rs1), "=r" (rs2)
- : "r" (regs->y), "0" (rs1), "1" (rs2)
- : "o0", "o1", "o2", "o3", "o4", "o5", "o7",
- "g1", "g2", "g3", "cc");
-#ifdef DEBUG_MULDIV
- printk ("0x%x\n", rs1);
-#endif
- if (store_reg(rs1, rdv, regs))
- return -1;
- break;
- }
- if (is_foocc (insn)) {
- regs->psr &= ~PSR_ICC;
- if ((inst & 0xe) == 14) {
- /* ?div */
- if (rs2) regs->psr |= PSR_V;
- }
- if (!rs1) regs->psr |= PSR_Z;
- if (((int)rs1) < 0) regs->psr |= PSR_N;
-#ifdef DEBUG_MULDIV
- printk ("psr muldiv: %08x\n", regs->psr);
-#endif
- }
- advance(regs);
- return 0;
-}
diff --git a/arch/sparc/kernel/traps_32.c b/arch/sparc/kernel/traps_32.c
index d2de21333146..a5785ea2a85d 100644
--- a/arch/sparc/kernel/traps_32.c
+++ b/arch/sparc/kernel/traps_32.c
@@ -120,8 +120,6 @@ void do_illegal_instruction(struct pt_regs *regs, unsigned long pc, unsigned lon
printk("Ill instr. at pc=%08lx instruction is %08lx\n",
regs->pc, *(unsigned long *)regs->pc);
#endif
- if (!do_user_muldiv (regs, pc))
- return;
info.si_signo = SIGILL;
info.si_errno = 0;
diff --git a/arch/sparc/lib/Makefile b/arch/sparc/lib/Makefile
index 33d8d85ad594..ead6df25054c 100644
--- a/arch/sparc/lib/Makefile
+++ b/arch/sparc/lib/Makefile
@@ -4,7 +4,7 @@
asflags-y := -ansi -DST_DIV0=0x02
ccflags-y := -Werror
-lib-$(CONFIG_SPARC32) += mul.o rem.o sdiv.o udiv.o umul.o urem.o ashrdi3.o
+lib-$(CONFIG_SPARC32) += ashrdi3.o
lib-$(CONFIG_SPARC32) += memcpy.o memset.o
lib-y += strlen.o
lib-y += checksum_$(BITS).o
diff --git a/arch/sparc/lib/divdi3.S b/arch/sparc/lib/divdi3.S
index d74bc0925f2d..9614b48b6ef8 100644
--- a/arch/sparc/lib/divdi3.S
+++ b/arch/sparc/lib/divdi3.S
@@ -19,7 +19,6 @@ Boston, MA 02111-1307, USA. */
.text
.align 4
- .global .udiv
.globl __divdi3
__divdi3:
save %sp,-104,%sp
@@ -83,8 +82,9 @@ __divdi3:
bne .LL85
mov %i0,%o2
mov 1,%o0
- call .udiv,0
mov 0,%o1
+ wr %g0, 0, %y
+ udiv %o0, %o1, %o0
mov %o0,%o4
mov %i0,%o2
.LL85:
diff --git a/arch/sparc/lib/ksyms.c b/arch/sparc/lib/ksyms.c
index 1bc8972f029f..2dc30875c8bc 100644
--- a/arch/sparc/lib/ksyms.c
+++ b/arch/sparc/lib/ksyms.c
@@ -61,16 +61,6 @@ extern void ___rw_read_try(void);
extern void ___rw_read_exit(void);
extern void ___rw_write_enter(void);
-/* Alias functions whose names begin with "." and export the aliases.
- * The module references will be fixed up by module_frob_arch_sections.
- */
-extern int _Div(int, int);
-extern int _Mul(int, int);
-extern int _Rem(int, int);
-extern unsigned _Udiv(unsigned, unsigned);
-extern unsigned _Umul(unsigned, unsigned);
-extern unsigned _Urem(unsigned, unsigned);
-
/* Networking helper routines. */
EXPORT_SYMBOL(__csum_partial_copy_sparc_generic);
@@ -95,13 +85,6 @@ EXPORT_SYMBOL(__ashldi3);
EXPORT_SYMBOL(__lshrdi3);
EXPORT_SYMBOL(__muldi3);
EXPORT_SYMBOL(__divdi3);
-
-EXPORT_SYMBOL(_Rem);
-EXPORT_SYMBOL(_Urem);
-EXPORT_SYMBOL(_Mul);
-EXPORT_SYMBOL(_Umul);
-EXPORT_SYMBOL(_Div);
-EXPORT_SYMBOL(_Udiv);
#endif
/*
diff --git a/arch/sparc/lib/mul.S b/arch/sparc/lib/mul.S
deleted file mode 100644
index c45470d0b0ce..000000000000
--- a/arch/sparc/lib/mul.S
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * mul.S: This routine was taken from glibc-1.09 and is covered
- * by the GNU Library General Public License Version 2.
- */
-
-/*
- * Signed multiply, from Appendix E of the Sparc Version 8
- * Architecture Manual.
- */
-
-/*
- * Returns %o0 * %o1 in %o1%o0 (i.e., %o1 holds the upper 32 bits of
- * the 64-bit product).
- *
- * This code optimizes short (less than 13-bit) multiplies.
- */
-
- .globl .mul
- .globl _Mul
-.mul:
-_Mul: /* needed for export */
- mov %o0, %y ! multiplier -> Y
- andncc %o0, 0xfff, %g0 ! test bits 12..31
- be Lmul_shortway ! if zero, can do it the short way
- andcc %g0, %g0, %o4 ! zero the partial product and clear N and V
-
- /*
- * Long multiply. 32 steps, followed by a final shift step.
- */
- mulscc %o4, %o1, %o4 ! 1
- mulscc %o4, %o1, %o4 ! 2
- mulscc %o4, %o1, %o4 ! 3
- mulscc %o4, %o1, %o4 ! 4
- mulscc %o4, %o1, %o4 ! 5
- mulscc %o4, %o1, %o4 ! 6
- mulscc %o4, %o1, %o4 ! 7
- mulscc %o4, %o1, %o4 ! 8
- mulscc %o4, %o1, %o4 ! 9
- mulscc %o4, %o1, %o4 ! 10
- mulscc %o4, %o1, %o4 ! 11
- mulscc %o4, %o1, %o4 ! 12
- mulscc %o4, %o1, %o4 ! 13
- mulscc %o4, %o1, %o4 ! 14
- mulscc %o4, %o1, %o4 ! 15
- mulscc %o4, %o1, %o4 ! 16
- mulscc %o4, %o1, %o4 ! 17
- mulscc %o4, %o1, %o4 ! 18
- mulscc %o4, %o1, %o4 ! 19
- mulscc %o4, %o1, %o4 ! 20
- mulscc %o4, %o1, %o4 ! 21
- mulscc %o4, %o1, %o4 ! 22
- mulscc %o4, %o1, %o4 ! 23
- mulscc %o4, %o1, %o4 ! 24
- mulscc %o4, %o1, %o4 ! 25
- mulscc %o4, %o1, %o4 ! 26
- mulscc %o4, %o1, %o4 ! 27
- mulscc %o4, %o1, %o4 ! 28
- mulscc %o4, %o1, %o4 ! 29
- mulscc %o4, %o1, %o4 ! 30
- mulscc %o4, %o1, %o4 ! 31
- mulscc %o4, %o1, %o4 ! 32
- mulscc %o4, %g0, %o4 ! final shift
-
- ! If %o0 was negative, the result is
- ! (%o0 * %o1) + (%o1 << 32))
- ! We fix that here.
-
-#if 0
- tst %o0
- bge 1f
- rd %y, %o0
-
- ! %o0 was indeed negative; fix upper 32 bits of result by subtracting
- ! %o1 (i.e., return %o4 - %o1 in %o1).
- retl
- sub %o4, %o1, %o1
-
-1:
- retl
- mov %o4, %o1
-#else
- /* Faster code adapted from tege@sics.se's code for umul.S. */
- sra %o0, 31, %o2 ! make mask from sign bit
- and %o1, %o2, %o2 ! %o2 = 0 or %o1, depending on sign of %o0
- rd %y, %o0 ! get lower half of product
- retl
- sub %o4, %o2, %o1 ! subtract compensation
- ! and put upper half in place
-#endif
-
-Lmul_shortway:
- /*
- * Short multiply. 12 steps, followed by a final shift step.
- * The resulting bits are off by 12 and (32-12) = 20 bit positions,
- * but there is no problem with %o0 being negative (unlike above).
- */
- mulscc %o4, %o1, %o4 ! 1
- mulscc %o4, %o1, %o4 ! 2
- mulscc %o4, %o1, %o4 ! 3
- mulscc %o4, %o1, %o4 ! 4
- mulscc %o4, %o1, %o4 ! 5
- mulscc %o4, %o1, %o4 ! 6
- mulscc %o4, %o1, %o4 ! 7
- mulscc %o4, %o1, %o4 ! 8
- mulscc %o4, %o1, %o4 ! 9
- mulscc %o4, %o1, %o4 ! 10
- mulscc %o4, %o1, %o4 ! 11
- mulscc %o4, %o1, %o4 ! 12
- mulscc %o4, %g0, %o4 ! final shift
-
- /*
- * %o4 has 20 of the bits that should be in the low part of the
- * result; %y has the bottom 12 (as %y's top 12). That is:
- *
- * %o4 %y
- * +----------------+----------------+
- * | -12- | -20- | -12- | -20- |
- * +------(---------+------)---------+
- * --hi-- ----low-part----
- *
- * The upper 12 bits of %o4 should be sign-extended to form the
- * high part of the product (i.e., highpart = %o4 >> 20).
- */
-
- rd %y, %o5
- sll %o4, 12, %o0 ! shift middle bits left 12
- srl %o5, 20, %o5 ! shift low bits right 20, zero fill at left
- or %o5, %o0, %o0 ! construct low part of result
- retl
- sra %o4, 20, %o1 ! ... and extract high part of result
-
- .globl .mul_patch
-.mul_patch:
- smul %o0, %o1, %o0
- retl
- rd %y, %o1
- nop
diff --git a/arch/sparc/lib/muldi3.S b/arch/sparc/lib/muldi3.S
index 7f17872d0603..9794939d1c12 100644
--- a/arch/sparc/lib/muldi3.S
+++ b/arch/sparc/lib/muldi3.S
@@ -63,12 +63,12 @@ __muldi3:
rd %y, %o1
mov %o1, %l3
mov %i1, %o0
- call .umul
mov %i2, %o1
+ umul %o0, %o1, %o0
mov %o0, %l0
mov %i0, %o0
- call .umul
mov %i3, %o1
+ umul %o0, %o1, %o0
add %l0, %o0, %l0
mov %l2, %i0
add %l2, %l0, %i0
diff --git a/arch/sparc/lib/rem.S b/arch/sparc/lib/rem.S
deleted file mode 100644
index 42fb86252815..000000000000
--- a/arch/sparc/lib/rem.S
+++ /dev/null
@@ -1,384 +0,0 @@
-/*
- * rem.S: This routine was taken from glibc-1.09 and is covered
- * by the GNU Library General Public License Version 2.
- */
-
-
-/* This file is generated from divrem.m4; DO NOT EDIT! */
-/*
- * Division and remainder, from Appendix E of the Sparc Version 8
- * Architecture Manual, with fixes from Gordon Irlam.
- */
-
-/*
- * Input: dividend and divisor in %o0 and %o1 respectively.
- *
- * m4 parameters:
- * .rem name of function to generate
- * rem rem=div => %o0 / %o1; rem=rem => %o0 % %o1
- * true true=true => signed; true=false => unsigned
- *
- * Algorithm parameters:
- * N how many bits per iteration we try to get (4)
- * WORDSIZE total number of bits (32)
- *
- * Derived constants:
- * TOPBITS number of bits in the top decade of a number
- *
- * Important variables:
- * Q the partial quotient under development (initially 0)
- * R the remainder so far, initially the dividend
- * ITER number of main division loop iterations required;
- * equal to ceil(log2(quotient) / N). Note that this
- * is the log base (2^N) of the quotient.
- * V the current comparand, initially divisor*2^(ITER*N-1)
- *
- * Cost:
- * Current estimate for non-large dividend is
- * ceil(log2(quotient) / N) * (10 + 7N/2) + C
- * A large dividend is one greater than 2^(31-TOPBITS) and takes a
- * different path, as the upper bits of the quotient must be developed
- * one bit at a time.
- */
-
-
- .globl .rem
- .globl _Rem
-.rem:
-_Rem: /* needed for export */
- ! compute sign of result; if neither is negative, no problem
- orcc %o1, %o0, %g0 ! either negative?
- bge 2f ! no, go do the divide
- mov %o0, %g2 ! compute sign in any case
-
- tst %o1
- bge 1f
- tst %o0
- ! %o1 is definitely negative; %o0 might also be negative
- bge 2f ! if %o0 not negative...
- sub %g0, %o1, %o1 ! in any case, make %o1 nonneg
-1: ! %o0 is negative, %o1 is nonnegative
- sub %g0, %o0, %o0 ! make %o0 nonnegative
-2:
-
- ! Ready to divide. Compute size of quotient; scale comparand.
- orcc %o1, %g0, %o5
- bne 1f
- mov %o0, %o3
-
- ! Divide by zero trap. If it returns, return 0 (about as
- ! wrong as possible, but that is what SunOS does...).
- ta ST_DIV0
- retl
- clr %o0
-
-1:
- cmp %o3, %o5 ! if %o1 exceeds %o0, done
- blu Lgot_result ! (and algorithm fails otherwise)
- clr %o2
-
- sethi %hi(1 << (32 - 4 - 1)), %g1
-
- cmp %o3, %g1
- blu Lnot_really_big
- clr %o4
-
- ! Here the dividend is >= 2**(31-N) or so. We must be careful here,
- ! as our usual N-at-a-shot divide step will cause overflow and havoc.
- ! The number of bits in the result here is N*ITER+SC, where SC <= N.
- ! Compute ITER in an unorthodox manner: know we need to shift V into
- ! the top decade: so do not even bother to compare to R.
- 1:
- cmp %o5, %g1
- bgeu 3f
- mov 1, %g7
-
- sll %o5, 4, %o5
-
- b 1b
- add %o4, 1, %o4
-
- ! Now compute %g7.
- 2:
- addcc %o5, %o5, %o5
-
- bcc Lnot_too_big
- add %g7, 1, %g7
-
- ! We get here if the %o1 overflowed while shifting.
- ! This means that %o3 has the high-order bit set.
- ! Restore %o5 and subtract from %o3.
- sll %g1, 4, %g1 ! high order bit
- srl %o5, 1, %o5 ! rest of %o5
- add %o5, %g1, %o5
-
- b Ldo_single_div
- sub %g7, 1, %g7
-
- Lnot_too_big:
- 3:
- cmp %o5, %o3
- blu 2b
- nop
-
- be Ldo_single_div
- nop
- /* NB: these are commented out in the V8-Sparc manual as well */
- /* (I do not understand this) */
- ! %o5 > %o3: went too far: back up 1 step
- ! srl %o5, 1, %o5
- ! dec %g7
- ! do single-bit divide steps
- !
- ! We have to be careful here. We know that %o3 >= %o5, so we can do the
- ! first divide step without thinking. BUT, the others are conditional,
- ! and are only done if %o3 >= 0. Because both %o3 and %o5 may have the high-
- ! order bit set in the first step, just falling into the regular
- ! division loop will mess up the first time around.
- ! So we unroll slightly...
- Ldo_single_div:
- subcc %g7, 1, %g7
- bl Lend_regular_divide
- nop
-
- sub %o3, %o5, %o3
- mov 1, %o2
-
- b Lend_single_divloop
- nop
- Lsingle_divloop:
- sll %o2, 1, %o2
-
- bl 1f
- srl %o5, 1, %o5
- ! %o3 >= 0
- sub %o3, %o5, %o3
-
- b 2f
- add %o2, 1, %o2
- 1: ! %o3 < 0
- add %o3, %o5, %o3
- sub %o2, 1, %o2
- 2:
- Lend_single_divloop:
- subcc %g7, 1, %g7
- bge Lsingle_divloop
- tst %o3
-
- b,a Lend_regular_divide
-
-Lnot_really_big:
-1:
- sll %o5, 4, %o5
- cmp %o5, %o3
- bleu 1b
- addcc %o4, 1, %o4
- be Lgot_result
- sub %o4, 1, %o4
-
- tst %o3 ! set up for initial iteration
-Ldivloop:
- sll %o2, 4, %o2
- ! depth 1, accumulated bits 0
- bl L.1.16
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 2, accumulated bits 1
- bl L.2.17
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 3, accumulated bits 3
- bl L.3.19
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 4, accumulated bits 7
- bl L.4.23
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
-
- b 9f
- add %o2, (7*2+1), %o2
-
-L.4.23:
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (7*2-1), %o2
-
-L.3.19:
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 4, accumulated bits 5
- bl L.4.21
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (5*2+1), %o2
-
-L.4.21:
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (5*2-1), %o2
-
-L.2.17:
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 3, accumulated bits 1
- bl L.3.17
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 4, accumulated bits 3
- bl L.4.19
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (3*2+1), %o2
-
-L.4.19:
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (3*2-1), %o2
-
-L.3.17:
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 4, accumulated bits 1
- bl L.4.17
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (1*2+1), %o2
-
-L.4.17:
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (1*2-1), %o2
-
-L.1.16:
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 2, accumulated bits -1
- bl L.2.15
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 3, accumulated bits -1
- bl L.3.15
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 4, accumulated bits -1
- bl L.4.15
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (-1*2+1), %o2
-
-L.4.15:
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (-1*2-1), %o2
-
-L.3.15:
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 4, accumulated bits -3
- bl L.4.13
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (-3*2+1), %o2
-
-L.4.13:
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (-3*2-1), %o2
-
-L.2.15:
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 3, accumulated bits -3
- bl L.3.13
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 4, accumulated bits -5
- bl L.4.11
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (-5*2+1), %o2
-
-L.4.11:
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (-5*2-1), %o2
-
-
-L.3.13:
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 4, accumulated bits -7
- bl L.4.9
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (-7*2+1), %o2
-
-L.4.9:
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (-7*2-1), %o2
-
- 9:
-Lend_regular_divide:
- subcc %o4, 1, %o4
- bge Ldivloop
- tst %o3
-
- bl,a Lgot_result
- ! non-restoring fixup here (one instruction only!)
- add %o3, %o1, %o3
-
-Lgot_result:
- ! check to see if answer should be < 0
- tst %g2
- bl,a 1f
- sub %g0, %o3, %o3
-1:
- retl
- mov %o3, %o0
-
- .globl .rem_patch
-.rem_patch:
- sra %o0, 0x1f, %o4
- wr %o4, 0x0, %y
- nop
- nop
- nop
- sdivcc %o0, %o1, %o2
- bvs,a 1f
- xnor %o2, %g0, %o2
-1: smul %o2, %o1, %o2
- retl
- sub %o0, %o2, %o0
- nop
diff --git a/arch/sparc/lib/sdiv.S b/arch/sparc/lib/sdiv.S
deleted file mode 100644
index f0a0d4e4db78..000000000000
--- a/arch/sparc/lib/sdiv.S
+++ /dev/null
@@ -1,381 +0,0 @@
-/*
- * sdiv.S: This routine was taken from glibc-1.09 and is covered
- * by the GNU Library General Public License Version 2.
- */
-
-
-/* This file is generated from divrem.m4; DO NOT EDIT! */
-/*
- * Division and remainder, from Appendix E of the Sparc Version 8
- * Architecture Manual, with fixes from Gordon Irlam.
- */
-
-/*
- * Input: dividend and divisor in %o0 and %o1 respectively.
- *
- * m4 parameters:
- * .div name of function to generate
- * div div=div => %o0 / %o1; div=rem => %o0 % %o1
- * true true=true => signed; true=false => unsigned
- *
- * Algorithm parameters:
- * N how many bits per iteration we try to get (4)
- * WORDSIZE total number of bits (32)
- *
- * Derived constants:
- * TOPBITS number of bits in the top decade of a number
- *
- * Important variables:
- * Q the partial quotient under development (initially 0)
- * R the remainder so far, initially the dividend
- * ITER number of main division loop iterations required;
- * equal to ceil(log2(quotient) / N). Note that this
- * is the log base (2^N) of the quotient.
- * V the current comparand, initially divisor*2^(ITER*N-1)
- *
- * Cost:
- * Current estimate for non-large dividend is
- * ceil(log2(quotient) / N) * (10 + 7N/2) + C
- * A large dividend is one greater than 2^(31-TOPBITS) and takes a
- * different path, as the upper bits of the quotient must be developed
- * one bit at a time.
- */
-
-
- .globl .div
- .globl _Div
-.div:
-_Div: /* needed for export */
- ! compute sign of result; if neither is negative, no problem
- orcc %o1, %o0, %g0 ! either negative?
- bge 2f ! no, go do the divide
- xor %o1, %o0, %g2 ! compute sign in any case
-
- tst %o1
- bge 1f
- tst %o0
- ! %o1 is definitely negative; %o0 might also be negative
- bge 2f ! if %o0 not negative...
- sub %g0, %o1, %o1 ! in any case, make %o1 nonneg
-1: ! %o0 is negative, %o1 is nonnegative
- sub %g0, %o0, %o0 ! make %o0 nonnegative
-2:
-
- ! Ready to divide. Compute size of quotient; scale comparand.
- orcc %o1, %g0, %o5
- bne 1f
- mov %o0, %o3
-
- ! Divide by zero trap. If it returns, return 0 (about as
- ! wrong as possible, but that is what SunOS does...).
- ta ST_DIV0
- retl
- clr %o0
-
-1:
- cmp %o3, %o5 ! if %o1 exceeds %o0, done
- blu Lgot_result ! (and algorithm fails otherwise)
- clr %o2
-
- sethi %hi(1 << (32 - 4 - 1)), %g1
-
- cmp %o3, %g1
- blu Lnot_really_big
- clr %o4
-
- ! Here the dividend is >= 2**(31-N) or so. We must be careful here,
- ! as our usual N-at-a-shot divide step will cause overflow and havoc.
- ! The number of bits in the result here is N*ITER+SC, where SC <= N.
- ! Compute ITER in an unorthodox manner: know we need to shift V into
- ! the top decade: so do not even bother to compare to R.
- 1:
- cmp %o5, %g1
- bgeu 3f
- mov 1, %g7
-
- sll %o5, 4, %o5
-
- b 1b
- add %o4, 1, %o4
-
- ! Now compute %g7.
- 2:
- addcc %o5, %o5, %o5
- bcc Lnot_too_big
- add %g7, 1, %g7
-
- ! We get here if the %o1 overflowed while shifting.
- ! This means that %o3 has the high-order bit set.
- ! Restore %o5 and subtract from %o3.
- sll %g1, 4, %g1 ! high order bit
- srl %o5, 1, %o5 ! rest of %o5
- add %o5, %g1, %o5
-
- b Ldo_single_div
- sub %g7, 1, %g7
-
- Lnot_too_big:
- 3:
- cmp %o5, %o3
- blu 2b
- nop
-
- be Ldo_single_div
- nop
- /* NB: these are commented out in the V8-Sparc manual as well */
- /* (I do not understand this) */
- ! %o5 > %o3: went too far: back up 1 step
- ! srl %o5, 1, %o5
- ! dec %g7
- ! do single-bit divide steps
- !
- ! We have to be careful here. We know that %o3 >= %o5, so we can do the
- ! first divide step without thinking. BUT, the others are conditional,
- ! and are only done if %o3 >= 0. Because both %o3 and %o5 may have the high-
- ! order bit set in the first step, just falling into the regular
- ! division loop will mess up the first time around.
- ! So we unroll slightly...
- Ldo_single_div:
- subcc %g7, 1, %g7
- bl Lend_regular_divide
- nop
-
- sub %o3, %o5, %o3
- mov 1, %o2
-
- b Lend_single_divloop
- nop
- Lsingle_divloop:
- sll %o2, 1, %o2
-
- bl 1f
- srl %o5, 1, %o5
- ! %o3 >= 0
- sub %o3, %o5, %o3
-
- b 2f
- add %o2, 1, %o2
- 1: ! %o3 < 0
- add %o3, %o5, %o3
- sub %o2, 1, %o2
- 2:
- Lend_single_divloop:
- subcc %g7, 1, %g7
- bge Lsingle_divloop
- tst %o3
-
- b,a Lend_regular_divide
-
-Lnot_really_big:
-1:
- sll %o5, 4, %o5
- cmp %o5, %o3
- bleu 1b
- addcc %o4, 1, %o4
-
- be Lgot_result
- sub %o4, 1, %o4
-
- tst %o3 ! set up for initial iteration
-Ldivloop:
- sll %o2, 4, %o2
- ! depth 1, accumulated bits 0
- bl L.1.16
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 2, accumulated bits 1
- bl L.2.17
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 3, accumulated bits 3
- bl L.3.19
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 4, accumulated bits 7
- bl L.4.23
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (7*2+1), %o2
-
-L.4.23:
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (7*2-1), %o2
-
-L.3.19:
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 4, accumulated bits 5
- bl L.4.21
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (5*2+1), %o2
-
-L.4.21:
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (5*2-1), %o2
-
-L.2.17:
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 3, accumulated bits 1
- bl L.3.17
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 4, accumulated bits 3
- bl L.4.19
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (3*2+1), %o2
-
-L.4.19:
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (3*2-1), %o2
-
-
-L.3.17:
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 4, accumulated bits 1
- bl L.4.17
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (1*2+1), %o2
-
-L.4.17:
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (1*2-1), %o2
-
-L.1.16:
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 2, accumulated bits -1
- bl L.2.15
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 3, accumulated bits -1
- bl L.3.15
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 4, accumulated bits -1
- bl L.4.15
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (-1*2+1), %o2
-
-L.4.15:
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (-1*2-1), %o2
-
-L.3.15:
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 4, accumulated bits -3
- bl L.4.13
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (-3*2+1), %o2
-
-L.4.13:
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (-3*2-1), %o2
-
-L.2.15:
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 3, accumulated bits -3
- bl L.3.13
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 4, accumulated bits -5
- bl L.4.11
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (-5*2+1), %o2
-
-L.4.11:
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (-5*2-1), %o2
-
-L.3.13:
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 4, accumulated bits -7
- bl L.4.9
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (-7*2+1), %o2
-
-L.4.9:
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (-7*2-1), %o2
-
- 9:
-Lend_regular_divide:
- subcc %o4, 1, %o4
- bge Ldivloop
- tst %o3
-
- bl,a Lgot_result
- ! non-restoring fixup here (one instruction only!)
- sub %o2, 1, %o2
-
-Lgot_result:
- ! check to see if answer should be < 0
- tst %g2
- bl,a 1f
- sub %g0, %o2, %o2
-1:
- retl
- mov %o2, %o0
-
- .globl .div_patch
-.div_patch:
- sra %o0, 0x1f, %o2
- wr %o2, 0x0, %y
- nop
- nop
- nop
- sdivcc %o0, %o1, %o0
- bvs,a 1f
- xnor %o0, %g0, %o0
-1: retl
- nop
diff --git a/arch/sparc/lib/udiv.S b/arch/sparc/lib/udiv.S
deleted file mode 100644
index 2101405bdfcb..000000000000
--- a/arch/sparc/lib/udiv.S
+++ /dev/null
@@ -1,357 +0,0 @@
-/*
- * udiv.S: This routine was taken from glibc-1.09 and is covered
- * by the GNU Library General Public License Version 2.
- */
-
-
-/* This file is generated from divrem.m4; DO NOT EDIT! */
-/*
- * Division and remainder, from Appendix E of the Sparc Version 8
- * Architecture Manual, with fixes from Gordon Irlam.
- */
-
-/*
- * Input: dividend and divisor in %o0 and %o1 respectively.
- *
- * m4 parameters:
- * .udiv name of function to generate
- * div div=div => %o0 / %o1; div=rem => %o0 % %o1
- * false false=true => signed; false=false => unsigned
- *
- * Algorithm parameters:
- * N how many bits per iteration we try to get (4)
- * WORDSIZE total number of bits (32)
- *
- * Derived constants:
- * TOPBITS number of bits in the top decade of a number
- *
- * Important variables:
- * Q the partial quotient under development (initially 0)
- * R the remainder so far, initially the dividend
- * ITER number of main division loop iterations required;
- * equal to ceil(log2(quotient) / N). Note that this
- * is the log base (2^N) of the quotient.
- * V the current comparand, initially divisor*2^(ITER*N-1)
- *
- * Cost:
- * Current estimate for non-large dividend is
- * ceil(log2(quotient) / N) * (10 + 7N/2) + C
- * A large dividend is one greater than 2^(31-TOPBITS) and takes a
- * different path, as the upper bits of the quotient must be developed
- * one bit at a time.
- */
-
-
- .globl .udiv
- .globl _Udiv
-.udiv:
-_Udiv: /* needed for export */
-
- ! Ready to divide. Compute size of quotient; scale comparand.
- orcc %o1, %g0, %o5
- bne 1f
- mov %o0, %o3
-
- ! Divide by zero trap. If it returns, return 0 (about as
- ! wrong as possible, but that is what SunOS does...).
- ta ST_DIV0
- retl
- clr %o0
-
-1:
- cmp %o3, %o5 ! if %o1 exceeds %o0, done
- blu Lgot_result ! (and algorithm fails otherwise)
- clr %o2
-
- sethi %hi(1 << (32 - 4 - 1)), %g1
-
- cmp %o3, %g1
- blu Lnot_really_big
- clr %o4
-
- ! Here the dividend is >= 2**(31-N) or so. We must be careful here,
- ! as our usual N-at-a-shot divide step will cause overflow and havoc.
- ! The number of bits in the result here is N*ITER+SC, where SC <= N.
- ! Compute ITER in an unorthodox manner: know we need to shift V into
- ! the top decade: so do not even bother to compare to R.
- 1:
- cmp %o5, %g1
- bgeu 3f
- mov 1, %g7
-
- sll %o5, 4, %o5
-
- b 1b
- add %o4, 1, %o4
-
- ! Now compute %g7.
- 2:
- addcc %o5, %o5, %o5
- bcc Lnot_too_big
- add %g7, 1, %g7
-
- ! We get here if the %o1 overflowed while shifting.
- ! This means that %o3 has the high-order bit set.
- ! Restore %o5 and subtract from %o3.
- sll %g1, 4, %g1 ! high order bit
- srl %o5, 1, %o5 ! rest of %o5
- add %o5, %g1, %o5
-
- b Ldo_single_div
- sub %g7, 1, %g7
-
- Lnot_too_big:
- 3:
- cmp %o5, %o3
- blu 2b
- nop
-
- be Ldo_single_div
- nop
- /* NB: these are commented out in the V8-Sparc manual as well */
- /* (I do not understand this) */
- ! %o5 > %o3: went too far: back up 1 step
- ! srl %o5, 1, %o5
- ! dec %g7
- ! do single-bit divide steps
- !
- ! We have to be careful here. We know that %o3 >= %o5, so we can do the
- ! first divide step without thinking. BUT, the others are conditional,
- ! and are only done if %o3 >= 0. Because both %o3 and %o5 may have the high-
- ! order bit set in the first step, just falling into the regular
- ! division loop will mess up the first time around.
- ! So we unroll slightly...
- Ldo_single_div:
- subcc %g7, 1, %g7
- bl Lend_regular_divide
- nop
-
- sub %o3, %o5, %o3
- mov 1, %o2
-
- b Lend_single_divloop
- nop
- Lsingle_divloop:
- sll %o2, 1, %o2
- bl 1f
- srl %o5, 1, %o5
- ! %o3 >= 0
- sub %o3, %o5, %o3
- b 2f
- add %o2, 1, %o2
- 1: ! %o3 < 0
- add %o3, %o5, %o3
- sub %o2, 1, %o2
- 2:
- Lend_single_divloop:
- subcc %g7, 1, %g7
- bge Lsingle_divloop
- tst %o3
-
- b,a Lend_regular_divide
-
-Lnot_really_big:
-1:
- sll %o5, 4, %o5
-
- cmp %o5, %o3
- bleu 1b
- addcc %o4, 1, %o4
-
- be Lgot_result
- sub %o4, 1, %o4
-
- tst %o3 ! set up for initial iteration
-Ldivloop:
- sll %o2, 4, %o2
- ! depth 1, accumulated bits 0
- bl L.1.16
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 2, accumulated bits 1
- bl L.2.17
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 3, accumulated bits 3
- bl L.3.19
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 4, accumulated bits 7
- bl L.4.23
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (7*2+1), %o2
-
-L.4.23:
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (7*2-1), %o2
-
-L.3.19:
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 4, accumulated bits 5
- bl L.4.21
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (5*2+1), %o2
-
-L.4.21:
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (5*2-1), %o2
-
-L.2.17:
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 3, accumulated bits 1
- bl L.3.17
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 4, accumulated bits 3
- bl L.4.19
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (3*2+1), %o2
-
-L.4.19:
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (3*2-1), %o2
-
-L.3.17:
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 4, accumulated bits 1
- bl L.4.17
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (1*2+1), %o2
-
-L.4.17:
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (1*2-1), %o2
-
-L.1.16:
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 2, accumulated bits -1
- bl L.2.15
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 3, accumulated bits -1
- bl L.3.15
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 4, accumulated bits -1
- bl L.4.15
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (-1*2+1), %o2
-
-L.4.15:
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (-1*2-1), %o2
-
-L.3.15:
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 4, accumulated bits -3
- bl L.4.13
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (-3*2+1), %o2
-
-L.4.13:
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (-3*2-1), %o2
-
-L.2.15:
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 3, accumulated bits -3
- bl L.3.13
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 4, accumulated bits -5
- bl L.4.11
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (-5*2+1), %o2
-
-L.4.11:
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (-5*2-1), %o2
-
-L.3.13:
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 4, accumulated bits -7
- bl L.4.9
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (-7*2+1), %o2
-
-L.4.9:
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (-7*2-1), %o2
-
- 9:
-Lend_regular_divide:
- subcc %o4, 1, %o4
- bge Ldivloop
- tst %o3
-
- bl,a Lgot_result
- ! non-restoring fixup here (one instruction only!)
- sub %o2, 1, %o2
-
-Lgot_result:
-
- retl
- mov %o2, %o0
-
- .globl .udiv_patch
-.udiv_patch:
- wr %g0, 0x0, %y
- nop
- nop
- retl
- udiv %o0, %o1, %o0
- nop
diff --git a/arch/sparc/lib/udivdi3.S b/arch/sparc/lib/udivdi3.S
index b430f1f0ef62..24e0a355e2e8 100644
--- a/arch/sparc/lib/udivdi3.S
+++ b/arch/sparc/lib/udivdi3.S
@@ -60,8 +60,9 @@ __udivdi3:
bne .LL77
mov %i0,%o2
mov 1,%o0
- call .udiv,0
mov 0,%o1
+ wr %g0, 0, %y
+ udiv %o0, %o1, %o0
mov %o0,%o3
mov %i0,%o2
.LL77:
diff --git a/arch/sparc/lib/umul.S b/arch/sparc/lib/umul.S
deleted file mode 100644
index 1f36ae682529..000000000000
--- a/arch/sparc/lib/umul.S
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * umul.S: This routine was taken from glibc-1.09 and is covered
- * by the GNU Library General Public License Version 2.
- */
-
-
-/*
- * Unsigned multiply. Returns %o0 * %o1 in %o1%o0 (i.e., %o1 holds the
- * upper 32 bits of the 64-bit product).
- *
- * This code optimizes short (less than 13-bit) multiplies. Short
- * multiplies require 25 instruction cycles, and long ones require
- * 45 instruction cycles.
- *
- * On return, overflow has occurred (%o1 is not zero) if and only if
- * the Z condition code is clear, allowing, e.g., the following:
- *
- * call .umul
- * nop
- * bnz overflow (or tnz)
- */
-
- .globl .umul
- .globl _Umul
-.umul:
-_Umul: /* needed for export */
- or %o0, %o1, %o4
- mov %o0, %y ! multiplier -> Y
-
- andncc %o4, 0xfff, %g0 ! test bits 12..31 of *both* args
- be Lmul_shortway ! if zero, can do it the short way
- andcc %g0, %g0, %o4 ! zero the partial product and clear N and V
-
- /*
- * Long multiply. 32 steps, followed by a final shift step.
- */
- mulscc %o4, %o1, %o4 ! 1
- mulscc %o4, %o1, %o4 ! 2
- mulscc %o4, %o1, %o4 ! 3
- mulscc %o4, %o1, %o4 ! 4
- mulscc %o4, %o1, %o4 ! 5
- mulscc %o4, %o1, %o4 ! 6
- mulscc %o4, %o1, %o4 ! 7
- mulscc %o4, %o1, %o4 ! 8
- mulscc %o4, %o1, %o4 ! 9
- mulscc %o4, %o1, %o4 ! 10
- mulscc %o4, %o1, %o4 ! 11
- mulscc %o4, %o1, %o4 ! 12
- mulscc %o4, %o1, %o4 ! 13
- mulscc %o4, %o1, %o4 ! 14
- mulscc %o4, %o1, %o4 ! 15
- mulscc %o4, %o1, %o4 ! 16
- mulscc %o4, %o1, %o4 ! 17
- mulscc %o4, %o1, %o4 ! 18
- mulscc %o4, %o1, %o4 ! 19
- mulscc %o4, %o1, %o4 ! 20
- mulscc %o4, %o1, %o4 ! 21
- mulscc %o4, %o1, %o4 ! 22
- mulscc %o4, %o1, %o4 ! 23
- mulscc %o4, %o1, %o4 ! 24
- mulscc %o4, %o1, %o4 ! 25
- mulscc %o4, %o1, %o4 ! 26
- mulscc %o4, %o1, %o4 ! 27
- mulscc %o4, %o1, %o4 ! 28
- mulscc %o4, %o1, %o4 ! 29
- mulscc %o4, %o1, %o4 ! 30
- mulscc %o4, %o1, %o4 ! 31
- mulscc %o4, %o1, %o4 ! 32
- mulscc %o4, %g0, %o4 ! final shift
-
-
- /*
- * Normally, with the shift-and-add approach, if both numbers are
- * positive you get the correct result. With 32-bit two's-complement
- * numbers, -x is represented as
- *
- * x 32
- * ( 2 - ------ ) mod 2 * 2
- * 32
- * 2
- *
- * (the `mod 2' subtracts 1 from 1.bbbb). To avoid lots of 2^32s,
- * we can treat this as if the radix point were just to the left
- * of the sign bit (multiply by 2^32), and get
- *
- * -x = (2 - x) mod 2
- *
- * Then, ignoring the `mod 2's for convenience:
- *
- * x * y = xy
- * -x * y = 2y - xy
- * x * -y = 2x - xy
- * -x * -y = 4 - 2x - 2y + xy
- *
- * For signed multiplies, we subtract (x << 32) from the partial
- * product to fix this problem for negative multipliers (see mul.s).
- * Because of the way the shift into the partial product is calculated
- * (N xor V), this term is automatically removed for the multiplicand,
- * so we don't have to adjust.
- *
- * But for unsigned multiplies, the high order bit wasn't a sign bit,
- * and the correction is wrong. So for unsigned multiplies where the
- * high order bit is one, we end up with xy - (y << 32). To fix it
- * we add y << 32.
- */
-#if 0
- tst %o1
- bl,a 1f ! if %o1 < 0 (high order bit = 1),
- add %o4, %o0, %o4 ! %o4 += %o0 (add y to upper half)
-
-1:
- rd %y, %o0 ! get lower half of product
- retl
- addcc %o4, %g0, %o1 ! put upper half in place and set Z for %o1==0
-#else
- /* Faster code from tege@sics.se. */
- sra %o1, 31, %o2 ! make mask from sign bit
- and %o0, %o2, %o2 ! %o2 = 0 or %o0, depending on sign of %o1
- rd %y, %o0 ! get lower half of product
- retl
- addcc %o4, %o2, %o1 ! add compensation and put upper half in place
-#endif
-
-Lmul_shortway:
- /*
- * Short multiply. 12 steps, followed by a final shift step.
- * The resulting bits are off by 12 and (32-12) = 20 bit positions,
- * but there is no problem with %o0 being negative (unlike above),
- * and overflow is impossible (the answer is at most 24 bits long).
- */
- mulscc %o4, %o1, %o4 ! 1
- mulscc %o4, %o1, %o4 ! 2
- mulscc %o4, %o1, %o4 ! 3
- mulscc %o4, %o1, %o4 ! 4
- mulscc %o4, %o1, %o4 ! 5
- mulscc %o4, %o1, %o4 ! 6
- mulscc %o4, %o1, %o4 ! 7
- mulscc %o4, %o1, %o4 ! 8
- mulscc %o4, %o1, %o4 ! 9
- mulscc %o4, %o1, %o4 ! 10
- mulscc %o4, %o1, %o4 ! 11
- mulscc %o4, %o1, %o4 ! 12
- mulscc %o4, %g0, %o4 ! final shift
-
- /*
- * %o4 has 20 of the bits that should be in the result; %y has
- * the bottom 12 (as %y's top 12). That is:
- *
- * %o4 %y
- * +----------------+----------------+
- * | -12- | -20- | -12- | -20- |
- * +------(---------+------)---------+
- * -----result-----
- *
- * The 12 bits of %o4 left of the `result' area are all zero;
- * in fact, all top 20 bits of %o4 are zero.
- */
-
- rd %y, %o5
- sll %o4, 12, %o0 ! shift middle bits left 12
- srl %o5, 20, %o5 ! shift low bits right 20
- or %o5, %o0, %o0
- retl
- addcc %g0, %g0, %o1 ! %o1 = zero, and set Z
-
- .globl .umul_patch
-.umul_patch:
- umul %o0, %o1, %o0
- retl
- rd %y, %o1
- nop
diff --git a/arch/sparc/lib/urem.S b/arch/sparc/lib/urem.S
deleted file mode 100644
index 77123eb83c44..000000000000
--- a/arch/sparc/lib/urem.S
+++ /dev/null
@@ -1,357 +0,0 @@
-/*
- * urem.S: This routine was taken from glibc-1.09 and is covered
- * by the GNU Library General Public License Version 2.
- */
-
-/* This file is generated from divrem.m4; DO NOT EDIT! */
-/*
- * Division and remainder, from Appendix E of the Sparc Version 8
- * Architecture Manual, with fixes from Gordon Irlam.
- */
-
-/*
- * Input: dividend and divisor in %o0 and %o1 respectively.
- *
- * m4 parameters:
- * .urem name of function to generate
- * rem rem=div => %o0 / %o1; rem=rem => %o0 % %o1
- * false false=true => signed; false=false => unsigned
- *
- * Algorithm parameters:
- * N how many bits per iteration we try to get (4)
- * WORDSIZE total number of bits (32)
- *
- * Derived constants:
- * TOPBITS number of bits in the top decade of a number
- *
- * Important variables:
- * Q the partial quotient under development (initially 0)
- * R the remainder so far, initially the dividend
- * ITER number of main division loop iterations required;
- * equal to ceil(log2(quotient) / N). Note that this
- * is the log base (2^N) of the quotient.
- * V the current comparand, initially divisor*2^(ITER*N-1)
- *
- * Cost:
- * Current estimate for non-large dividend is
- * ceil(log2(quotient) / N) * (10 + 7N/2) + C
- * A large dividend is one greater than 2^(31-TOPBITS) and takes a
- * different path, as the upper bits of the quotient must be developed
- * one bit at a time.
- */
-
- .globl .urem
- .globl _Urem
-.urem:
-_Urem: /* needed for export */
-
- ! Ready to divide. Compute size of quotient; scale comparand.
- orcc %o1, %g0, %o5
- bne 1f
- mov %o0, %o3
-
- ! Divide by zero trap. If it returns, return 0 (about as
- ! wrong as possible, but that is what SunOS does...).
- ta ST_DIV0
- retl
- clr %o0
-
-1:
- cmp %o3, %o5 ! if %o1 exceeds %o0, done
- blu Lgot_result ! (and algorithm fails otherwise)
- clr %o2
-
- sethi %hi(1 << (32 - 4 - 1)), %g1
-
- cmp %o3, %g1
- blu Lnot_really_big
- clr %o4
-
- ! Here the dividend is >= 2**(31-N) or so. We must be careful here,
- ! as our usual N-at-a-shot divide step will cause overflow and havoc.
- ! The number of bits in the result here is N*ITER+SC, where SC <= N.
- ! Compute ITER in an unorthodox manner: know we need to shift V into
- ! the top decade: so do not even bother to compare to R.
- 1:
- cmp %o5, %g1
- bgeu 3f
- mov 1, %g7
-
- sll %o5, 4, %o5
-
- b 1b
- add %o4, 1, %o4
-
- ! Now compute %g7.
- 2:
- addcc %o5, %o5, %o5
- bcc Lnot_too_big
- add %g7, 1, %g7
-
- ! We get here if the %o1 overflowed while shifting.
- ! This means that %o3 has the high-order bit set.
- ! Restore %o5 and subtract from %o3.
- sll %g1, 4, %g1 ! high order bit
- srl %o5, 1, %o5 ! rest of %o5
- add %o5, %g1, %o5
-
- b Ldo_single_div
- sub %g7, 1, %g7
-
- Lnot_too_big:
- 3:
- cmp %o5, %o3
- blu 2b
- nop
-
- be Ldo_single_div
- nop
- /* NB: these are commented out in the V8-Sparc manual as well */
- /* (I do not understand this) */
- ! %o5 > %o3: went too far: back up 1 step
- ! srl %o5, 1, %o5
- ! dec %g7
- ! do single-bit divide steps
- !
- ! We have to be careful here. We know that %o3 >= %o5, so we can do the
- ! first divide step without thinking. BUT, the others are conditional,
- ! and are only done if %o3 >= 0. Because both %o3 and %o5 may have the high-
- ! order bit set in the first step, just falling into the regular
- ! division loop will mess up the first time around.
- ! So we unroll slightly...
- Ldo_single_div:
- subcc %g7, 1, %g7
- bl Lend_regular_divide
- nop
-
- sub %o3, %o5, %o3
- mov 1, %o2
-
- b Lend_single_divloop
- nop
- Lsingle_divloop:
- sll %o2, 1, %o2
- bl 1f
- srl %o5, 1, %o5
- ! %o3 >= 0
- sub %o3, %o5, %o3
- b 2f
- add %o2, 1, %o2
- 1: ! %o3 < 0
- add %o3, %o5, %o3
- sub %o2, 1, %o2
- 2:
- Lend_single_divloop:
- subcc %g7, 1, %g7
- bge Lsingle_divloop
- tst %o3
-
- b,a Lend_regular_divide
-
-Lnot_really_big:
-1:
- sll %o5, 4, %o5
-
- cmp %o5, %o3
- bleu 1b
- addcc %o4, 1, %o4
-
- be Lgot_result
- sub %o4, 1, %o4
-
- tst %o3 ! set up for initial iteration
-Ldivloop:
- sll %o2, 4, %o2
- ! depth 1, accumulated bits 0
- bl L.1.16
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 2, accumulated bits 1
- bl L.2.17
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 3, accumulated bits 3
- bl L.3.19
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 4, accumulated bits 7
- bl L.4.23
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (7*2+1), %o2
-
-L.4.23:
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (7*2-1), %o2
-
-L.3.19:
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 4, accumulated bits 5
- bl L.4.21
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (5*2+1), %o2
-
-L.4.21:
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (5*2-1), %o2
-
-L.2.17:
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 3, accumulated bits 1
- bl L.3.17
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 4, accumulated bits 3
- bl L.4.19
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (3*2+1), %o2
-
-L.4.19:
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (3*2-1), %o2
-
-L.3.17:
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 4, accumulated bits 1
- bl L.4.17
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (1*2+1), %o2
-
-L.4.17:
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (1*2-1), %o2
-
-L.1.16:
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 2, accumulated bits -1
- bl L.2.15
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 3, accumulated bits -1
- bl L.3.15
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 4, accumulated bits -1
- bl L.4.15
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (-1*2+1), %o2
-
-L.4.15:
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (-1*2-1), %o2
-
-L.3.15:
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 4, accumulated bits -3
- bl L.4.13
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (-3*2+1), %o2
-
-L.4.13:
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (-3*2-1), %o2
-
-L.2.15:
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 3, accumulated bits -3
- bl L.3.13
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 4, accumulated bits -5
- bl L.4.11
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (-5*2+1), %o2
-
-L.4.11:
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (-5*2-1), %o2
-
-L.3.13:
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 4, accumulated bits -7
- bl L.4.9
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (-7*2+1), %o2
-
-L.4.9:
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (-7*2-1), %o2
-
- 9:
-Lend_regular_divide:
- subcc %o4, 1, %o4
- bge Ldivloop
- tst %o3
-
- bl,a Lgot_result
- ! non-restoring fixup here (one instruction only!)
- add %o3, %o1, %o3
-
-Lgot_result:
-
- retl
- mov %o3, %o0
-
- .globl .urem_patch
-.urem_patch:
- wr %g0, 0x0, %y
- nop
- nop
- nop
- udiv %o0, %o1, %o2
- umul %o2, %o1, %o2
- retl
- sub %o0, %o2, %o0
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-17 07:52:52 +0000