diff options
Diffstat (limited to 'arch/x86/kernel/smpboot.c')
-rw-r--r-- | arch/x86/kernel/smpboot.c | 125 |
1 files changed, 80 insertions, 45 deletions
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 7985c5b3f916..76b6f50978f7 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -52,6 +52,7 @@ #include <asm/desc.h> #include <asm/nmi.h> #include <asm/irq.h> +#include <asm/idle.h> #include <asm/smp.h> #include <asm/trampoline.h> #include <asm/cpu.h> @@ -88,7 +89,7 @@ static DEFINE_PER_CPU(struct task_struct *, idle_thread_array); #define get_idle_for_cpu(x) (per_cpu(idle_thread_array, x)) #define set_idle_for_cpu(x, p) (per_cpu(idle_thread_array, x) = (p)) #else -struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ; +static struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ; #define get_idle_for_cpu(x) (idle_thread_array[(x)]) #define set_idle_for_cpu(x, p) (idle_thread_array[(x)] = (p)) #endif @@ -123,13 +124,12 @@ EXPORT_PER_CPU_SYMBOL(cpu_info); static atomic_t init_deasserted; -static int boot_cpu_logical_apicid; /* representing cpus for which sibling maps can be computed */ static cpumask_t cpu_sibling_setup_map; /* Set if we find a B stepping CPU */ -int __cpuinitdata smp_b_stepping; +static int __cpuinitdata smp_b_stepping; #if defined(CONFIG_NUMA) && defined(CONFIG_X86_32) @@ -165,6 +165,8 @@ static void unmap_cpu_to_node(int cpu) #endif #ifdef CONFIG_X86_32 +static int boot_cpu_logical_apicid; + u8 cpu_2_logical_apicid[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID }; @@ -210,7 +212,7 @@ static void __cpuinit smp_callin(void) /* * (This works even if the APIC is not enabled.) */ - phys_id = GET_APIC_ID(read_apic_id()); + phys_id = read_apic_id(); cpuid = smp_processor_id(); if (cpu_isset(cpuid, cpu_callin_map)) { panic("%s: phys CPU#%d, CPU#%d already present??\n", __func__, @@ -257,6 +259,7 @@ static void __cpuinit smp_callin(void) end_local_APIC_setup(); map_cpu_to_logical_apicid(); + notify_cpu_starting(cpuid); /* * Get our bogomips. * @@ -550,8 +553,7 @@ static inline void __inquire_remote_apic(int apicid) printk(KERN_CONT "a previous APIC delivery may have failed\n"); - apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid)); - apic_write(APIC_ICR, APIC_DM_REMRD | regs[i]); + apic_icr_write(APIC_DM_REMRD | regs[i], apicid); timeout = 0; do { @@ -583,11 +585,9 @@ wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip) int maxlvt; /* Target chip */ - apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(logical_apicid)); - /* Boot on the stack */ /* Kick the second */ - apic_write(APIC_ICR, APIC_DM_NMI | APIC_DEST_LOGICAL); + apic_icr_write(APIC_DM_NMI | APIC_DEST_LOGICAL, logical_apicid); pr_debug("Waiting for send to finish...\n"); send_status = safe_apic_wait_icr_idle(); @@ -640,13 +640,11 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip) /* * Turn INIT on target chip */ - apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid)); - /* * Send IPI */ - apic_write(APIC_ICR, - APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT); + apic_icr_write(APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT, + phys_apicid); pr_debug("Waiting for send to finish...\n"); send_status = safe_apic_wait_icr_idle(); @@ -656,10 +654,8 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip) pr_debug("Deasserting INIT.\n"); /* Target chip */ - apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid)); - /* Send IPI */ - apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT); + apic_icr_write(APIC_INT_LEVELTRIG | APIC_DM_INIT, phys_apicid); pr_debug("Waiting for send to finish...\n"); send_status = safe_apic_wait_icr_idle(); @@ -702,11 +698,10 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip) */ /* Target chip */ - apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid)); - /* Boot on the stack */ /* Kick the second */ - apic_write(APIC_ICR, APIC_DM_STARTUP | (start_eip >> 12)); + apic_icr_write(APIC_DM_STARTUP | (start_eip >> 12), + phys_apicid); /* * Give the other CPU some time to accept the IPI. @@ -1175,10 +1170,17 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus) * Setup boot CPU information */ smp_store_cpu_info(0); /* Final full version of the data */ +#ifdef CONFIG_X86_32 boot_cpu_logical_apicid = logical_smp_processor_id(); +#endif current_thread_info()->cpu = 0; /* needed? */ set_cpu_sibling_map(0); +#ifdef CONFIG_X86_64 + enable_IR_x2apic(); + setup_apic_routing(); +#endif + if (smp_sanity_check(max_cpus) < 0) { printk(KERN_INFO "SMP disabled\n"); disable_smp(); @@ -1186,9 +1188,9 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus) } preempt_disable(); - if (GET_APIC_ID(read_apic_id()) != boot_cpu_physical_apicid) { + if (read_apic_id() != boot_cpu_physical_apicid) { panic("Boot APIC ID in local APIC unexpected (%d vs %d)", - GET_APIC_ID(read_apic_id()), boot_cpu_physical_apicid); + read_apic_id(), boot_cpu_physical_apicid); /* Or can we switch back to PIC here? */ } preempt_enable(); @@ -1313,16 +1315,13 @@ __init void prefill_possible_map(void) if (!num_processors) num_processors = 1; -#ifdef CONFIG_HOTPLUG_CPU if (additional_cpus == -1) { if (disabled_cpus > 0) additional_cpus = disabled_cpus; else additional_cpus = 0; } -#else - additional_cpus = 0; -#endif + possible = num_processors + additional_cpus; if (possible > NR_CPUS) possible = NR_CPUS; @@ -1346,25 +1345,9 @@ static void __ref remove_cpu_from_maps(int cpu) numa_remove_cpu(cpu); } -int __cpu_disable(void) +void cpu_disable_common(void) { int cpu = smp_processor_id(); - - /* - * Perhaps use cpufreq to drop frequency, but that could go - * into generic code. - * - * We won't take down the boot processor on i386 due to some - * interrupts only being able to be serviced by the BSP. - * Especially so if we're not using an IOAPIC -zwane - */ - if (cpu == 0) - return -EBUSY; - - if (nmi_watchdog == NMI_LOCAL_APIC) - stop_apic_nmi_watchdog(NULL); - clear_local_APIC(); - /* * HACK: * Allow any queued timer interrupts to get serviced @@ -1382,10 +1365,32 @@ int __cpu_disable(void) remove_cpu_from_maps(cpu); unlock_vector_lock(); fixup_irqs(cpu_online_map); +} + +int native_cpu_disable(void) +{ + int cpu = smp_processor_id(); + + /* + * Perhaps use cpufreq to drop frequency, but that could go + * into generic code. + * + * We won't take down the boot processor on i386 due to some + * interrupts only being able to be serviced by the BSP. + * Especially so if we're not using an IOAPIC -zwane + */ + if (cpu == 0) + return -EBUSY; + + if (nmi_watchdog == NMI_LOCAL_APIC) + stop_apic_nmi_watchdog(NULL); + clear_local_APIC(); + + cpu_disable_common(); return 0; } -void __cpu_die(unsigned int cpu) +void native_cpu_die(unsigned int cpu) { /* We don't do anything here: idle task is faking death itself. */ unsigned int i; @@ -1402,15 +1407,45 @@ void __cpu_die(unsigned int cpu) } printk(KERN_ERR "CPU %u didn't die...\n", cpu); } + +void play_dead_common(void) +{ + idle_task_exit(); + reset_lazy_tlbstate(); + irq_ctx_exit(raw_smp_processor_id()); + c1e_remove_cpu(raw_smp_processor_id()); + + mb(); + /* Ack it */ + __get_cpu_var(cpu_state) = CPU_DEAD; + + /* + * With physical CPU hotplug, we should halt the cpu + */ + local_irq_disable(); +} + +void native_play_dead(void) +{ + play_dead_common(); + wbinvd_halt(); +} + #else /* ... !CONFIG_HOTPLUG_CPU */ -int __cpu_disable(void) +int native_cpu_disable(void) { return -ENOSYS; } -void __cpu_die(unsigned int cpu) +void native_cpu_die(unsigned int cpu) { /* We said "no" in __cpu_disable */ BUG(); } + +void native_play_dead(void) +{ + BUG(); +} + #endif |