diff options
Diffstat (limited to 'arch/x86/kernel')
25 files changed, 35 insertions, 35 deletions
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index 4db35544de73..4a234677e213 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -199,7 +199,7 @@ void *text_poke_early(void *addr, const void *opcode, size_t len); /* Replace instructions with better alternatives for this CPU type. This runs before SMP is initialized to avoid SMP problems with - self modifying code. This implies that assymetric systems where + self modifying code. This implies that asymmetric systems where APs have less capabilities than the boot processor are not handled. Tough. Make sure you disable such features by hand. */ diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 7b1e8e10b89c..86d1ad4962a7 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -73,7 +73,7 @@ static u32 __init allocate_aperture(void) /* * using 512M as goal, in case kexec will load kernel_big * that will do the on position decompress, and could overlap with - * that positon with gart that is used. + * that position with gart that is used. * sequende: * kernel_small * ==> kexec (with kdump trigger path or previous doesn't shutdown gart) diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 4b5ebd26f565..f15c6f76071c 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1886,7 +1886,7 @@ void disable_IO_APIC(void) * * With interrupt-remapping, for now we will use virtual wire A mode, * as virtual wire B is little complex (need to configure both - * IOAPIC RTE aswell as interrupt-remapping table entry). + * IOAPIC RTE as well as interrupt-remapping table entry). * As this gets called during crash dump, keep this simple for now. */ if (ioapic_i8259.pin != -1 && !intr_remapping_enabled) { @@ -2905,7 +2905,7 @@ void __init setup_IO_APIC(void) } /* - * Called after all the initialization is done. If we didnt find any + * Called after all the initialization is done. If we didn't find any * APIC bugs then we can allow the modify fast path */ diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index 0e4f24c2a746..a10e516dd78d 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -66,7 +66,7 @@ * 1.5: Fix segment register reloading (in case of bad segments saved * across BIOS call). * Stephen Rothwell - * 1.6: Cope with complier/assembler differences. + * 1.6: Cope with compiler/assembler differences. * Only try to turn off the first display device. * Fix OOPS at power off with no APM BIOS by Jan Echternach * <echter@informatik.uni-rostock.de> diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.c b/arch/x86/kernel/cpu/cpufreq/longhaul.c index 03162dac6271..cf48cdd6907d 100644 --- a/arch/x86/kernel/cpu/cpufreq/longhaul.c +++ b/arch/x86/kernel/cpu/cpufreq/longhaul.c @@ -444,7 +444,7 @@ static int __cpuinit longhaul_get_ranges(void) return -EINVAL; } /* Get max multiplier - as we always did. - * Longhaul MSR is usefull only when voltage scaling is enabled. + * Longhaul MSR is useful only when voltage scaling is enabled. * C3 is booting at max anyway. */ maxmult = mult; /* Get min multiplier */ @@ -1011,7 +1011,7 @@ static void __exit longhaul_exit(void) * trigger frequency transition in some cases. */ module_param(disable_acpi_c3, int, 0644); MODULE_PARM_DESC(disable_acpi_c3, "Don't use ACPI C3 support"); -/* Change CPU voltage with frequency. Very usefull to save +/* Change CPU voltage with frequency. Very useful to save * power, but most VIA C3 processors aren't supporting it. */ module_param(scale_voltage, int, 0644); MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor"); diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index c567dec854f6..b41f7da4555b 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -1276,7 +1276,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) if (powernow_k8_cpu_init_acpi(data)) { /* - * Use the PSB BIOS structure. This is only availabe on + * Use the PSB BIOS structure. This is only available on * an UP version, and is deprecated by AMD. */ if (num_online_cpus() != 1) { diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c index 8abd869baabf..91bc25b67bc1 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c @@ -292,7 +292,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy) result = speedstep_smi_ownership(); if (result) { - dprintk("fails in aquiring ownership of a SMI interface.\n"); + dprintk("fails in acquiring ownership of a SMI interface.\n"); return -EINVAL; } @@ -360,7 +360,7 @@ static int speedstep_resume(struct cpufreq_policy *policy) int result = speedstep_smi_ownership(); if (result) - dprintk("fails in re-aquiring ownership of a SMI interface.\n"); + dprintk("fails in re-acquiring ownership of a SMI interface.\n"); return result; } diff --git a/arch/x86/kernel/cpu/mcheck/mce-inject.c b/arch/x86/kernel/cpu/mcheck/mce-inject.c index a77971979564..0ed633c5048b 100644 --- a/arch/x86/kernel/cpu/mcheck/mce-inject.c +++ b/arch/x86/kernel/cpu/mcheck/mce-inject.c @@ -32,7 +32,7 @@ static void inject_mce(struct mce *m) { struct mce *i = &per_cpu(injectm, m->extcpu); - /* Make sure noone reads partially written injectm */ + /* Make sure no one reads partially written injectm */ i->finished = 0; mb(); m->finished = 0; diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index d916183b7f9c..ab1122998dba 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -881,7 +881,7 @@ reset: * Check if the address reported by the CPU is in a format we can parse. * It would be possible to add code for most other cases, but all would * be somewhat complicated (e.g. segment offset would require an instruction - * parser). So only support physical addresses upto page granuality for now. + * parser). So only support physical addresses up to page granuality for now. */ static int mce_usable_address(struct mce *m) { diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index 9f27228ceffd..a71efcdbb092 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -1,6 +1,6 @@ /* * This only handles 32bit MTRR on 32bit hosts. This is strictly wrong - * because MTRRs can span upto 40 bits (36bits on most modern x86) + * because MTRRs can span up to 40 bits (36bits on most modern x86) */ #define DEBUG diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index 26604188aa49..279bc9de1cc7 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -1111,7 +1111,7 @@ static int x86_pmu_add(struct perf_event *event, int flags) /* * If group events scheduling transaction was started, - * skip the schedulability test here, it will be peformed + * skip the schedulability test here, it will be performed * at commit time (->commit_txn) as a whole */ if (cpuc->group_flag & PERF_EVENT_TXN) diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c index 3769ac822f96..0811f5ebfba6 100644 --- a/arch/x86/kernel/cpu/perf_event_p4.c +++ b/arch/x86/kernel/cpu/perf_event_p4.c @@ -1,5 +1,5 @@ /* - * Netburst Perfomance Events (P4, old Xeon) + * Netburst Performance Events (P4, old Xeon) * * Copyright (C) 2010 Parallels, Inc., Cyrill Gorcunov <gorcunov@openvz.org> * Copyright (C) 2010 Intel Corporation, Lin Ming <ming.m.lin@intel.com> @@ -679,7 +679,7 @@ static int p4_validate_raw_event(struct perf_event *event) */ /* - * if an event is shared accross the logical threads + * if an event is shared across the logical threads * the user needs special permissions to be able to use it */ if (p4_ht_active() && p4_event_bind_map[v].shared) { @@ -790,13 +790,13 @@ static void p4_pmu_disable_pebs(void) * * It's still allowed that two threads setup same cache * events so we can't simply clear metrics until we knew - * noone is depending on us, so we need kind of counter + * no one is depending on us, so we need kind of counter * for "ReplayEvent" users. * * What is more complex -- RAW events, if user (for some * reason) will pass some cache event metric with improper * event opcode -- it's fine from hardware point of view - * but completely nonsence from "meaning" of such action. + * but completely nonsense from "meaning" of such action. * * So at moment let leave metrics turned on forever -- it's * ok for now but need to be revisited! diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c index 227b0448960d..d22d0c4edcfd 100644 --- a/arch/x86/kernel/cpu/vmware.c +++ b/arch/x86/kernel/cpu/vmware.c @@ -86,7 +86,7 @@ static void __init vmware_platform_setup(void) } /* - * While checking the dmi string infomation, just checking the product + * While checking the dmi string information, just checking the product * serial key should be enough, as this will always have a VMware * specific string when running under VMware hypervisor. */ diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index b72b4a6466a9..8a445a0c989e 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -18,7 +18,7 @@ * A note on terminology: * - top of stack: Architecture defined interrupt frame from SS to RIP * at the top of the kernel process stack. - * - partial stack frame: partially saved registers upto R11. + * - partial stack frame: partially saved registers up to R11. * - full stack frame: Like partial stack frame, but all register saved. * * Some macro usage: @@ -422,7 +422,7 @@ ENTRY(ret_from_fork) END(ret_from_fork) /* - * System call entry. Upto 6 arguments in registers are supported. + * System call entry. Up to 6 arguments in registers are supported. * * SYSCALL does not save anything on the stack and does not change the * stack pointer. diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c index e60c38cc0eed..12aff2537682 100644 --- a/arch/x86/kernel/i387.c +++ b/arch/x86/kernel/i387.c @@ -145,7 +145,7 @@ EXPORT_SYMBOL_GPL(fpu_finit); * The _current_ task is using the FPU for the first time * so initialize it and set the mxcsr to its default * value at reset if we support XMM instructions and then - * remeber the current task has used the FPU. + * remember the current task has used the FPU. */ int init_fpu(struct task_struct *tsk) { diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c index 9974d21048fd..72090705a656 100644 --- a/arch/x86/kernel/irq_32.c +++ b/arch/x86/kernel/irq_32.c @@ -172,7 +172,7 @@ asmlinkage void do_softirq(void) call_on_stack(__do_softirq, isp); /* - * Shouldnt happen, we returned above if in_interrupt(): + * Shouldn't happen, we returned above if in_interrupt(): */ WARN_ON_ONCE(softirq_count()); } diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c index 7c64c420a9f6..dba0b36941a5 100644 --- a/arch/x86/kernel/kgdb.c +++ b/arch/x86/kernel/kgdb.c @@ -278,7 +278,7 @@ static int hw_break_release_slot(int breakno) pevent = per_cpu_ptr(breakinfo[breakno].pev, cpu); if (dbg_release_bp_slot(*pevent)) /* - * The debugger is responisble for handing the retry on + * The debugger is responsible for handing the retry on * remove failure. */ return -1; diff --git a/arch/x86/kernel/mca_32.c b/arch/x86/kernel/mca_32.c index 63eaf6596233..177183cbb6ae 100644 --- a/arch/x86/kernel/mca_32.c +++ b/arch/x86/kernel/mca_32.c @@ -259,7 +259,7 @@ static int __init mca_init(void) /* * WARNING: Be careful when making changes here. Putting an adapter * and the motherboard simultaneously into setup mode may result in - * damage to chips (according to The Indispensible PC Hardware Book + * damage to chips (according to The Indispensable PC Hardware Book * by Hans-Peter Messmer). Also, we disable system interrupts (so * that we are not disturbed in the middle of this). */ diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 01b0f6d06451..6f789a887c06 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -883,7 +883,7 @@ static int __init update_mp_table(void) if (!mpc_new_phys) { unsigned char old, new; - /* check if we can change the postion */ + /* check if we can change the position */ mpc->checksum = 0; old = mpf_checksum((unsigned char *)mpc, mpc->length); mpc->checksum = 0xff; @@ -892,7 +892,7 @@ static int __init update_mp_table(void) printk(KERN_INFO "mpc is readonly, please try alloc_mptable instead\n"); return 0; } - printk(KERN_INFO "use in-positon replacing\n"); + printk(KERN_INFO "use in-position replacing\n"); } else { mpf->physptr = mpc_new_phys; mpc_new = phys_to_virt(mpc_new_phys); diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c index f56a117cef68..e8c33a302006 100644 --- a/arch/x86/kernel/pci-calgary_64.c +++ b/arch/x86/kernel/pci-calgary_64.c @@ -1279,7 +1279,7 @@ static int __init calgary_bus_has_devices(int bus, unsigned short pci_dev) if (pci_dev == PCI_DEVICE_ID_IBM_CALIOC2) { /* - * FIXME: properly scan for devices accross the + * FIXME: properly scan for devices across the * PCI-to-PCI bridge on every CalIOC2 port. */ return 1; @@ -1295,7 +1295,7 @@ static int __init calgary_bus_has_devices(int bus, unsigned short pci_dev) /* * calgary_init_bitmap_from_tce_table(): - * Funtion for kdump case. In the second/kdump kernel initialize + * Function for kdump case. In the second/kdump kernel initialize * the bitmap based on the tce table entries obtained from first kernel */ static void calgary_init_bitmap_from_tce_table(struct iommu_table *tbl) diff --git a/arch/x86/kernel/step.c b/arch/x86/kernel/step.c index 58de45ee08b6..7977f0cfe339 100644 --- a/arch/x86/kernel/step.c +++ b/arch/x86/kernel/step.c @@ -166,7 +166,7 @@ static void enable_step(struct task_struct *child, bool block) * Make sure block stepping (BTF) is not enabled unless it should be. * Note that we don't try to worry about any is_setting_trap_flag() * instructions after the first when using block stepping. - * So noone should try to use debugger block stepping in a program + * So no one should try to use debugger block stepping in a program * that uses user-mode single stepping itself. */ if (enable_single_step(child) && block) { diff --git a/arch/x86/kernel/topology.c b/arch/x86/kernel/topology.c index 7e4515957a1c..8927486a4649 100644 --- a/arch/x86/kernel/topology.c +++ b/arch/x86/kernel/topology.c @@ -39,7 +39,7 @@ int __ref arch_register_cpu(int num) /* * CPU0 cannot be offlined due to several * restrictions and assumptions in kernel. This basically - * doesnt add a control file, one cannot attempt to offline + * doesn't add a control file, one cannot attempt to offline * BSP. * * Also certain PCI quirks require not to enable hotplug control diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index ffe5755caa8b..9335bf7dd2e7 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -427,7 +427,7 @@ unsigned long native_calibrate_tsc(void) * the delta to the previous read. We keep track of the min * and max values of that delta. The delta is mostly defined * by the IO time of the PIT access, so we can detect when a - * SMI/SMM disturbance happend between the two reads. If the + * SMI/SMM disturbance happened between the two reads. If the * maximum time is significantly larger than the minimum time, * then we discard the result and have another try. * @@ -900,7 +900,7 @@ static DECLARE_DELAYED_WORK(tsc_irqwork, tsc_refine_calibration_work); * timer based, instead of loop based, we don't block the boot * process while this longer calibration is done. * - * If there are any calibration anomolies (too many SMIs, etc), + * If there are any calibration anomalies (too many SMIs, etc), * or the refined calibration is off by 1% of the fast early * calibration, we throw out the new calibration and use the * early calibration. diff --git a/arch/x86/kernel/verify_cpu.S b/arch/x86/kernel/verify_cpu.S index 0edefc19a113..b9242bacbe59 100644 --- a/arch/x86/kernel/verify_cpu.S +++ b/arch/x86/kernel/verify_cpu.S @@ -18,7 +18,7 @@ * This file is expected to run in 32bit code. Currently: * * arch/x86/boot/compressed/head_64.S: Boot cpu verification - * arch/x86/kernel/trampoline_64.S: secondary processor verfication + * arch/x86/kernel/trampoline_64.S: secondary processor verification * arch/x86/kernel/head_32.S: processor startup * * verify_cpu, returns the status of longmode and SSE in register %eax. diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c index 547128546cc3..a3911343976b 100644 --- a/arch/x86/kernel/xsave.c +++ b/arch/x86/kernel/xsave.c @@ -53,7 +53,7 @@ void __sanitize_i387_state(struct task_struct *tsk) /* * None of the feature bits are in init state. So nothing else - * to do for us, as the memory layout is upto date. + * to do for us, as the memory layout is up to date. */ if ((xstate_bv & pcntxt_mask) == pcntxt_mask) return; |