diff options
Diffstat (limited to 'arch/x86/kernel')
73 files changed, 2342 insertions, 1990 deletions
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 5e618c3b4720..8a42b797cd6b 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -18,14 +18,13 @@ CFLAGS_tsc_64.o := $(nostackp) obj-y := process_$(BITS).o signal_$(BITS).o entry_$(BITS).o obj-y += traps_$(BITS).o irq_$(BITS).o obj-y += time_$(BITS).o ioport.o ldt.o -obj-y += setup_$(BITS).o i8259_$(BITS).o setup.o +obj-y += setup_$(BITS).o i8259.o irqinit_$(BITS).o setup.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o setup64.o obj-y += bootflag.o e820_$(BITS).o obj-y += pci-dma.o quirks.o i8237.o topology.o kdebugfs.o obj-y += alternative.o i8253.o pci-nommu.o -obj-$(CONFIG_X86_64) += bugs_64.o obj-y += tsc_$(BITS).o io_delay.o rtc.o obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o @@ -82,6 +81,7 @@ obj-$(CONFIG_VMI) += vmi_32.o vmiclock_32.o obj-$(CONFIG_KVM_GUEST) += kvm.o obj-$(CONFIG_KVM_CLOCK) += kvmclock.o obj-$(CONFIG_PARAVIRT) += paravirt.o paravirt_patch_$(BITS).o +obj-$(CONFIG_PARAVIRT_CLOCK) += pvclock.o obj-$(CONFIG_PCSPKR_PLATFORM) += pcspeaker.o diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index c49ebcc6c41e..33c5216fd3e1 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -242,12 +242,19 @@ static int __init acpi_parse_madt(struct acpi_table_header *table) static void __cpuinit acpi_register_lapic(int id, u8 enabled) { + unsigned int ver = 0; + if (!enabled) { ++disabled_cpus; return; } - generic_processor_info(id, 0); +#ifdef CONFIG_X86_32 + if (boot_cpu_physical_apicid != -1U) + ver = apic_version[boot_cpu_physical_apicid]; +#endif + + generic_processor_info(id, ver); } static int __init @@ -767,8 +774,13 @@ static void __init acpi_register_lapic_address(unsigned long address) mp_lapic_addr = address; set_fixmap_nocache(FIX_APIC_BASE, address); - if (boot_cpu_physical_apicid == -1U) + if (boot_cpu_physical_apicid == -1U) { boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id()); +#ifdef CONFIG_X86_32 + apic_version[boot_cpu_physical_apicid] = + GET_APIC_VERSION(apic_read(APIC_LVR)); +#endif + } } static int __init early_acpi_parse_madt_lapic_addr_ovr(void) diff --git a/arch/x86/kernel/acpi/realmode/wakeup.S b/arch/x86/kernel/acpi/realmode/wakeup.S index f9b77fb37e5b..3355973b12ac 100644 --- a/arch/x86/kernel/acpi/realmode/wakeup.S +++ b/arch/x86/kernel/acpi/realmode/wakeup.S @@ -5,6 +5,7 @@ #include <asm/msr-index.h> #include <asm/page.h> #include <asm/pgtable.h> +#include <asm/processor-flags.h> .code16 .section ".header", "a" @@ -24,6 +25,11 @@ pmode_gdt: .quad 0 realmode_flags: .long 0 real_magic: .long 0 trampoline_segment: .word 0 +_pad1: .byte 0 +wakeup_jmp: .byte 0xea /* ljmpw */ +wakeup_jmp_off: .word 3f +wakeup_jmp_seg: .word 0 +wakeup_gdt: .quad 0, 0, 0 signature: .long 0x51ee1111 .text @@ -34,11 +40,34 @@ _start: cli cld + /* Apparently some dimwit BIOS programmers don't know how to + program a PM to RM transition, and we might end up here with + junk in the data segment descriptor registers. The only way + to repair that is to go into PM and fix it ourselves... */ + movw $16, %cx + lgdtl %cs:wakeup_gdt + movl %cr0, %eax + orb $X86_CR0_PE, %al + movl %eax, %cr0 + jmp 1f +1: ljmpw $8, $2f +2: + movw %cx, %ds + movw %cx, %es + movw %cx, %ss + movw %cx, %fs + movw %cx, %gs + + andb $~X86_CR0_PE, %al + movl %eax, %cr0 + jmp wakeup_jmp +3: /* Set up segments */ movw %cs, %ax movw %ax, %ds movw %ax, %es movw %ax, %ss + lidtl wakeup_idt movl $wakeup_stack_end, %esp @@ -98,7 +127,14 @@ bogus_real_magic: jmp 1b .data - .balign 4 + .balign 8 + + /* This is the standard real-mode IDT */ +wakeup_idt: + .word 0xffff /* limit */ + .long 0 /* address */ + .word 0 + .globl HEAP, heap_end HEAP: .long wakeup_heap diff --git a/arch/x86/kernel/acpi/realmode/wakeup.h b/arch/x86/kernel/acpi/realmode/wakeup.h index ef8166fe8020..69d38d0b2b64 100644 --- a/arch/x86/kernel/acpi/realmode/wakeup.h +++ b/arch/x86/kernel/acpi/realmode/wakeup.h @@ -24,6 +24,11 @@ struct wakeup_header { u32 realmode_flags; u32 real_magic; u16 trampoline_segment; /* segment with trampoline code, 64-bit only */ + u8 _pad1; + u8 wakeup_jmp; + u16 wakeup_jmp_off; + u16 wakeup_jmp_seg; + u64 wakeup_gdt[3]; u32 signature; /* To check we have correct structure */ } __attribute__((__packed__)); diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index afc25ee9964b..36af01f029ed 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -50,6 +50,20 @@ int acpi_save_state_mem(void) header->video_mode = saved_video_mode; + header->wakeup_jmp_seg = acpi_wakeup_address >> 4; + /* GDT[0]: GDT self-pointer */ + header->wakeup_gdt[0] = + (u64)(sizeof(header->wakeup_gdt) - 1) + + ((u64)(acpi_wakeup_address + + ((char *)&header->wakeup_gdt - (char *)acpi_realmode)) + << 16); + /* GDT[1]: real-mode-like code segment */ + header->wakeup_gdt[1] = (0x009bULL << 40) + + ((u64)acpi_wakeup_address << 16) + 0xffff; + /* GDT[2]: real-mode-like data segment */ + header->wakeup_gdt[2] = (0x0093ULL << 40) + + ((u64)acpi_wakeup_address << 16) + 0xffff; + #ifndef CONFIG_64BIT store_gdt((struct desc_ptr *)&header->pmode_gdt); @@ -111,7 +125,7 @@ void __init acpi_reserve_bootmem(void) return; } - acpi_wakeup_address = acpi_realmode; + acpi_wakeup_address = virt_to_phys((void *)acpi_realmode); } diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 479926d9e004..e819362c7068 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -35,6 +35,18 @@ int fallback_aper_force __initdata; int fix_aperture __initdata = 1; +struct bus_dev_range { + int bus; + int dev_base; + int dev_limit; +}; + +static struct bus_dev_range bus_dev_ranges[] __initdata = { + { 0x00, 0x18, 0x20}, + { 0xff, 0x00, 0x20}, + { 0xfe, 0x00, 0x20} +}; + static struct resource gart_resource = { .name = "GART", .flags = IORESOURCE_MEM, @@ -55,8 +67,9 @@ static u32 __init allocate_aperture(void) u32 aper_size; void *p; - if (fallback_aper_order > 7) - fallback_aper_order = 7; + /* aper_size should <= 1G */ + if (fallback_aper_order > 5) + fallback_aper_order = 5; aper_size = (32 * 1024 * 1024) << fallback_aper_order; /* @@ -65,7 +78,20 @@ static u32 __init allocate_aperture(void) * memory. Unfortunately we cannot move it up because that would * make the IOMMU useless. */ - p = __alloc_bootmem_nopanic(aper_size, aper_size, 0); + /* + * using 512M as goal, in case kexec will load kernel_big + * that will do the on position decompress, and could overlap with + * that positon with gart that is used. + * sequende: + * kernel_small + * ==> kexec (with kdump trigger path or previous doesn't shutdown gart) + * ==> kernel_small(gart area become e820_reserved) + * ==> kexec (with kdump trigger path or previous doesn't shutdown gart) + * ==> kerne_big (uncompressed size will be big than 64M or 128M) + * so don't use 512M below as gart iommu, leave the space for kernel + * code for safe + */ + p = __alloc_bootmem_nopanic(aper_size, aper_size, 512ULL<<20); if (!p || __pa(p)+aper_size > 0xffffffff) { printk(KERN_ERR "Cannot allocate aperture memory hole (%p,%uK)\n", @@ -83,69 +109,53 @@ static u32 __init allocate_aperture(void) return (u32)__pa(p); } -static int __init aperture_valid(u64 aper_base, u32 aper_size) -{ - if (!aper_base) - return 0; - - if (aper_base + aper_size > 0x100000000UL) { - printk(KERN_ERR "Aperture beyond 4GB. Ignoring.\n"); - return 0; - } - if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) { - printk(KERN_ERR "Aperture pointing to e820 RAM. Ignoring.\n"); - return 0; - } - if (aper_size < 64*1024*1024) { - printk(KERN_ERR "Aperture too small (%d MB)\n", aper_size>>20); - return 0; - } - - return 1; -} /* Find a PCI capability */ -static __u32 __init find_cap(int num, int slot, int func, int cap) +static u32 __init find_cap(int bus, int slot, int func, int cap) { int bytes; u8 pos; - if (!(read_pci_config_16(num, slot, func, PCI_STATUS) & + if (!(read_pci_config_16(bus, slot, func, PCI_STATUS) & PCI_STATUS_CAP_LIST)) return 0; - pos = read_pci_config_byte(num, slot, func, PCI_CAPABILITY_LIST); + pos = read_pci_config_byte(bus, slot, func, PCI_CAPABILITY_LIST); for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) { u8 id; pos &= ~3; - id = read_pci_config_byte(num, slot, func, pos+PCI_CAP_LIST_ID); + id = read_pci_config_byte(bus, slot, func, pos+PCI_CAP_LIST_ID); if (id == 0xff) break; if (id == cap) return pos; - pos = read_pci_config_byte(num, slot, func, + pos = read_pci_config_byte(bus, slot, func, pos+PCI_CAP_LIST_NEXT); } return 0; } /* Read a standard AGPv3 bridge header */ -static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) +static u32 __init read_agp(int bus, int slot, int func, int cap, u32 *order) { u32 apsize; u32 apsizereg; int nbits; u32 aper_low, aper_hi; u64 aper; + u32 old_order; - printk(KERN_INFO "AGP bridge at %02x:%02x:%02x\n", num, slot, func); - apsizereg = read_pci_config_16(num, slot, func, cap + 0x14); + printk(KERN_INFO "AGP bridge at %02x:%02x:%02x\n", bus, slot, func); + apsizereg = read_pci_config_16(bus, slot, func, cap + 0x14); if (apsizereg == 0xffffffff) { printk(KERN_ERR "APSIZE in AGP bridge unreadable\n"); return 0; } + /* old_order could be the value from NB gart setting */ + old_order = *order; + apsize = apsizereg & 0xfff; /* Some BIOS use weird encodings not in the AGPv3 table. */ if (apsize & 0xff) @@ -155,14 +165,26 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) if ((int)*order < 0) /* < 32MB */ *order = 0; - aper_low = read_pci_config(num, slot, func, 0x10); - aper_hi = read_pci_config(num, slot, func, 0x14); + aper_low = read_pci_config(bus, slot, func, 0x10); + aper_hi = read_pci_config(bus, slot, func, 0x14); aper = (aper_low & ~((1<<22)-1)) | ((u64)aper_hi << 32); + /* + * On some sick chips, APSIZE is 0. It means it wants 4G + * so let double check that order, and lets trust AMD NB settings: + */ + printk(KERN_INFO "Aperture from AGP @ %Lx old size %u MB\n", + aper, 32 << old_order); + if (aper + (32ULL<<(20 + *order)) > 0x100000000ULL) { + printk(KERN_INFO "Aperture size %u MB (APSIZE %x) is not right, using settings from NB\n", + 32 << *order, apsizereg); + *order = old_order; + } + printk(KERN_INFO "Aperture from AGP @ %Lx size %u MB (APSIZE %x)\n", aper, 32 << *order, apsizereg); - if (!aperture_valid(aper, (32*1024*1024) << *order)) + if (!aperture_valid(aper, (32*1024*1024) << *order, 32<<20)) return 0; return (u32)aper; } @@ -180,17 +202,17 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) * the AGP bridges should be always an own bus on the HT hierarchy, * but do it here for future safety. */ -static __u32 __init search_agp_bridge(u32 *order, int *valid_agp) +static u32 __init search_agp_bridge(u32 *order, int *valid_agp) { - int num, slot, func; + int bus, slot, func; /* Poor man's PCI discovery */ - for (num = 0; num < 256; num++) { + for (bus = 0; bus < 256; bus++) { for (slot = 0; slot < 32; slot++) { for (func = 0; func < 8; func++) { u32 class, cap; u8 type; - class = read_pci_config(num, slot, func, + class = read_pci_config(bus, slot, func, PCI_CLASS_REVISION); if (class == 0xffffffff) break; @@ -199,17 +221,17 @@ static __u32 __init search_agp_bridge(u32 *order, int *valid_agp) case PCI_CLASS_BRIDGE_HOST: case PCI_CLASS_BRIDGE_OTHER: /* needed? */ /* AGP bridge? */ - cap = find_cap(num, slot, func, + cap = find_cap(bus, slot, func, PCI_CAP_ID_AGP); if (!cap) break; *valid_agp = 1; - return read_agp(num, slot, func, cap, + return read_agp(bus, slot, func, cap, order); } /* No multi-function device? */ - type = read_pci_config_byte(num, slot, func, + type = read_pci_config_byte(bus, slot, func, PCI_HEADER_TYPE); if (!(type & 0x80)) break; @@ -249,36 +271,50 @@ void __init early_gart_iommu_check(void) * or BIOS forget to put that in reserved. * try to update e820 to make that region as reserved. */ - int fix, num; + int i, fix, slot; u32 ctl; u32 aper_size = 0, aper_order = 0, last_aper_order = 0; u64 aper_base = 0, last_aper_base = 0; - int aper_enabled = 0, last_aper_enabled = 0; + int aper_enabled = 0, last_aper_enabled = 0, last_valid = 0; if (!early_pci_allowed()) return; + /* This is mostly duplicate of iommu_hole_init */ fix = 0; - for (num = 24; num < 32; num++) { - if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00))) - continue; - - ctl = read_pci_config(0, num, 3, 0x90); - aper_enabled = ctl & 1; - aper_order = (ctl >> 1) & 7; - aper_size = (32 * 1024 * 1024) << aper_order; - aper_base = read_pci_config(0, num, 3, 0x94) & 0x7fff; - aper_base <<= 25; - - if ((last_aper_order && aper_order != last_aper_order) || - (last_aper_base && aper_base != last_aper_base) || - (last_aper_enabled && aper_enabled != last_aper_enabled)) { - fix = 1; - break; + for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) { + int bus; + int dev_base, dev_limit; + + bus = bus_dev_ranges[i].bus; + dev_base = bus_dev_ranges[i].dev_base; + dev_limit = bus_dev_ranges[i].dev_limit; + + for (slot = dev_base; slot < dev_limit; slot++) { + if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + continue; + + ctl = read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL); + aper_enabled = ctl & AMD64_GARTEN; + aper_order = (ctl >> 1) & 7; + aper_size = (32 * 1024 * 1024) << aper_order; + aper_base = read_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE) & 0x7fff; + aper_base <<= 25; + + if (last_valid) { + if ((aper_order != last_aper_order) || + (aper_base != last_aper_base) || + (aper_enabled != last_aper_enabled)) { + fix = 1; + break; + } + } + + last_aper_order = aper_order; + last_aper_base = aper_base; + last_aper_enabled = aper_enabled; + last_valid = 1; } - last_aper_order = aper_order; - last_aper_base = aper_base; - last_aper_enabled = aper_enabled; } if (!fix && !aper_enabled) @@ -290,32 +326,46 @@ void __init early_gart_iommu_check(void) if (gart_fix_e820 && !fix && aper_enabled) { if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) { - /* reserved it, so we can resuse it in second kernel */ + /* reserve it, so we can reuse it in second kernel */ printk(KERN_INFO "update e820 for GART\n"); add_memory_region(aper_base, aper_size, E820_RESERVED); update_e820(); } - return; } + if (!fix) + return; + /* different nodes have different setting, disable them all at first*/ - for (num = 24; num < 32; num++) { - if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00))) - continue; + for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) { + int bus; + int dev_base, dev_limit; + + bus = bus_dev_ranges[i].bus; + dev_base = bus_dev_ranges[i].dev_base; + dev_limit = bus_dev_ranges[i].dev_limit; + + for (slot = dev_base; slot < dev_limit; slot++) { + if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + continue; - ctl = read_pci_config(0, num, 3, 0x90); - ctl &= ~1; - write_pci_config(0, num, 3, 0x90, ctl); + ctl = read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL); + ctl &= ~AMD64_GARTEN; + write_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL, ctl); + } } } +static int __initdata printed_gart_size_msg; + void __init gart_iommu_hole_init(void) { + u32 agp_aper_base = 0, agp_aper_order = 0; u32 aper_size, aper_alloc = 0, aper_order = 0, last_aper_order = 0; u64 aper_base, last_aper_base = 0; - int fix, num, valid_agp = 0; - int node; + int fix, slot, valid_agp = 0; + int i, node; if (gart_iommu_aperture_disabled || !fix_aperture || !early_pci_allowed()) @@ -323,38 +373,63 @@ void __init gart_iommu_hole_init(void) printk(KERN_INFO "Checking aperture...\n"); + if (!fallback_aper_force) + agp_aper_base = search_agp_bridge(&agp_aper_order, &valid_agp); + fix = 0; node = 0; - for (num = 24; num < 32; num++) { - if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00))) - continue; - - iommu_detected = 1; - gart_iommu_aperture = 1; - - aper_order = (read_pci_config(0, num, 3, 0x90) >> 1) & 7; - aper_size = (32 * 1024 * 1024) << aper_order; - aper_base = read_pci_config(0, num, 3, 0x94) & 0x7fff; - aper_base <<= 25; - - printk(KERN_INFO "Node %d: aperture @ %Lx size %u MB\n", - node, aper_base, aper_size >> 20); - node++; - - if (!aperture_valid(aper_base, aper_size)) { - fix = 1; - break; - } + for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) { + int bus; + int dev_base, dev_limit; + + bus = bus_dev_ranges[i].bus; + dev_base = bus_dev_ranges[i].dev_base; + dev_limit = bus_dev_ranges[i].dev_limit; + + for (slot = dev_base; slot < dev_limit; slot++) { + if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + continue; + + iommu_detected = 1; + gart_iommu_aperture = 1; + + aper_order = (read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL) >> 1) & 7; + aper_size = (32 * 1024 * 1024) << aper_order; + aper_base = read_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE) & 0x7fff; + aper_base <<= 25; + + printk(KERN_INFO "Node %d: aperture @ %Lx size %u MB\n", + node, aper_base, aper_size >> 20); + node++; + + if (!aperture_valid(aper_base, aper_size, 64<<20)) { + if (valid_agp && agp_aper_base && + agp_aper_base == aper_base && + agp_aper_order == aper_order) { + /* the same between two setting from NB and agp */ + if (!no_iommu && end_pfn > MAX_DMA32_PFN && !printed_gart_size_msg) { + printk(KERN_ERR "you are using iommu with agp, but GART size is less than 64M\n"); + printk(KERN_ERR "please increase GART size in your BIOS setup\n"); + printk(KERN_ERR "if BIOS doesn't have that option, contact your HW vendor!\n"); + printed_gart_size_msg = 1; + } + } else { + fix = 1; + goto out; + } + } - if ((last_aper_order && aper_order != last_aper_order) || - (last_aper_base && aper_base != last_aper_base)) { - fix = 1; - break; + if ((last_aper_order && aper_order != last_aper_order) || + (last_aper_base && aper_base != last_aper_base)) { + fix = 1; + goto out; + } + last_aper_order = aper_order; + last_aper_base = aper_base; } - last_aper_order = aper_order; - last_aper_base = aper_base; } +out: if (!fix && !fallback_aper_force) { if (last_aper_base) { unsigned long n = (32 * 1024 * 1024) << last_aper_order; @@ -364,8 +439,10 @@ void __init gart_iommu_hole_init(void) return; } - if (!fallback_aper_force) - aper_alloc = search_agp_bridge(&aper_order, &valid_agp); + if (!fallback_aper_force) { + aper_alloc = agp_aper_base; + aper_order = agp_aper_order; + } if (aper_alloc) { /* Got the aperture from the AGP bridge */ @@ -401,16 +478,24 @@ void __init gart_iommu_hole_init(void) } /* Fix up the north bridges */ - for (num = 24; num < 32; num++) { - if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00))) - continue; - - /* - * Don't enable translation yet. That is done later. - * Assume this BIOS didn't initialise the GART so - * just overwrite all previous bits - */ - write_pci_config(0, num, 3, 0x90, aper_order<<1); - write_pci_config(0, num, 3, 0x94, aper_alloc>>25); + for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) { + int bus; + int dev_base, dev_limit; + + bus = bus_dev_ranges[i].bus; + dev_base = bus_dev_ranges[i].dev_base; + dev_limit = bus_dev_ranges[i].dev_limit; + for (slot = dev_base; slot < dev_limit; slot++) { + if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + continue; + + /* Don't enable translation yet. That is done later. + Assume this BIOS didn't initialise the GART so + just overwrite all previous bits */ + write_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL, aper_order << 1); + write_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE, aper_alloc >> 25); + } } + + set_up_gart_resume(aper_order, aper_alloc); } diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index 4b99b1bdeb6c..45d8da405ad9 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -64,9 +64,8 @@ static int enable_local_apic __initdata; /* Local APIC timer verification ok */ static int local_apic_timer_verify_ok; -/* Disable local APIC timer from the kernel commandline or via dmi quirk - or using CPU MSR check */ -int local_apic_timer_disabled; +/* Disable local APIC timer from the kernel commandline or via dmi quirk */ +static int local_apic_timer_disabled; /* Local APIC timer works in C2 */ int local_apic_timer_c2_ok; EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok); @@ -1154,9 +1153,6 @@ static int __init detect_init_APIC(void) if (l & MSR_IA32_APICBASE_ENABLE) mp_lapic_addr = l & MSR_IA32_APICBASE_BASE; - if (nmi_watchdog != NMI_NONE && nmi_watchdog != NMI_DISABLED) - nmi_watchdog = NMI_LOCAL_APIC; - printk(KERN_INFO "Found and enabled local APIC!\n"); apic_pm_activate(); @@ -1269,6 +1265,10 @@ int __init APIC_init_uniprocessor(void) setup_local_APIC(); +#ifdef CONFIG_X86_IO_APIC + if (!smp_found_config || skip_ioapic_setup || !nr_ioapics) +#endif + localise_nmi_watchdog(); end_local_APIC_setup(); #ifdef CONFIG_X86_IO_APIC if (smp_found_config) diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c index 5910020c3f24..3ef7752aa8e5 100644 --- a/arch/x86/kernel/apic_64.c +++ b/arch/x86/kernel/apic_64.c @@ -43,7 +43,7 @@ #include <mach_ipi.h> #include <mach_apic.h> -int disable_apic_timer __cpuinitdata; +static int disable_apic_timer __cpuinitdata; static int apic_calibrate_pmtmr __initdata; int disable_apic; @@ -422,32 +422,8 @@ void __init setup_boot_APIC_clock(void) setup_APIC_timer(); } -/* - * AMD C1E enabled CPUs have a real nasty problem: Some BIOSes set the - * C1E flag only in the secondary CPU, so when we detect the wreckage - * we already have enabled the boot CPU local apic timer. Check, if - * disable_apic_timer is set and the DUMMY flag is cleared. If yes, - * set the DUMMY flag again and force the broadcast mode in the - * clockevents layer. - */ -static void __cpuinit check_boot_apic_timer_broadcast(void) -{ - if (!disable_apic_timer || - (lapic_clockevent.features & CLOCK_EVT_FEAT_DUMMY)) - return; - - printk(KERN_INFO "AMD C1E detected late. Force timer broadcast.\n"); - lapic_clockevent.features |= CLOCK_EVT_FEAT_DUMMY; - - local_irq_enable(); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE, - &boot_cpu_physical_apicid); - local_irq_disable(); -} - void __cpuinit setup_secondary_APIC_clock(void) { - check_boot_apic_timer_broadcast(); setup_APIC_timer(); } @@ -534,7 +510,7 @@ int setup_profiling_timer(unsigned int multiplier) */ void clear_local_APIC(void) { - int maxlvt = lapic_get_maxlvt(); + int maxlvt; u32 v; /* APIC hasn't been mapped yet */ @@ -875,7 +851,7 @@ static int __init detect_init_APIC(void) void __init early_init_lapic_mapping(void) { - unsigned long apic_phys; + unsigned long phys_addr; /* * If no local APIC can be found then go out @@ -884,11 +860,11 @@ void __init early_init_lapic_mapping(void) if (!smp_found_config) return; - apic_phys = mp_lapic_addr; + phys_addr = mp_lapic_addr; - set_fixmap_nocache(FIX_APIC_BASE, apic_phys); + set_fixmap_nocache(FIX_APIC_BASE, phys_addr); apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n", - APIC_BASE, apic_phys); + APIC_BASE, phys_addr); /* * Fetch the APIC ID of the BSP in case we have a @@ -954,6 +930,8 @@ int __init APIC_init_uniprocessor(void) if (!skip_ioapic_setup && nr_ioapics) enable_IO_APIC(); + if (!smp_found_config || skip_ioapic_setup || !nr_ioapics) + localise_nmi_watchdog(); end_local_APIC_setup(); if (smp_found_config && !skip_ioapic_setup && nr_ioapics) diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index a0c6f8190887..65b1be5fe9ce 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -6,11 +6,15 @@ obj-y := intel_cacheinfo.o addon_cpuid_features.o obj-y += proc.o feature_names.o obj-$(CONFIG_X86_32) += common.o bugs.o +obj-$(CONFIG_X86_64) += bugs_64.o obj-$(CONFIG_X86_32) += amd.o +obj-$(CONFIG_X86_64) += amd_64.o obj-$(CONFIG_X86_32) += cyrix.o obj-$(CONFIG_X86_32) += centaur.o +obj-$(CONFIG_X86_64) += centaur_64.o obj-$(CONFIG_X86_32) += transmeta.o obj-$(CONFIG_X86_32) += intel.o +obj-$(CONFIG_X86_64) += intel_64.o obj-$(CONFIG_X86_32) += umc.o obj-$(CONFIG_X86_MCE) += mcheck/ diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c index c2e1ce33c7cb..84a8220a6072 100644 --- a/arch/x86/kernel/cpu/addon_cpuid_features.c +++ b/arch/x86/kernel/cpu/addon_cpuid_features.c @@ -1,9 +1,7 @@ - /* * Routines to indentify additional cpu features that are scattered in * cpuid space. */ - #include <linux/cpu.h> #include <asm/pat.h> @@ -53,19 +51,20 @@ void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c) #ifdef CONFIG_X86_PAT void __cpuinit validate_pat_support(struct cpuinfo_x86 *c) { + if (!cpu_has_pat) + pat_disable("PAT not supported by CPU."); + switch (c->x86_vendor) { - case X86_VENDOR_AMD: - if (c->x86 >= 0xf && c->x86 <= 0x11) - return; - break; case X86_VENDOR_INTEL: if (c->x86 == 0xF || (c->x86 == 6 && c->x86_model >= 15)) return; break; + case X86_VENDOR_AMD: + case X86_VENDOR_CENTAUR: + case X86_VENDOR_TRANSMETA: + return; } - pat_disable(cpu_has_pat ? - "PAT disabled. Not yet verified on this CPU type." : - "PAT not supported by CPU."); + pat_disable("PAT disabled. Not yet verified on this CPU type."); } #endif diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 245866828294..81a07ca65d44 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -24,43 +24,6 @@ extern void vide(void); __asm__(".align 4\nvide: ret"); -#ifdef CONFIG_X86_LOCAL_APIC -#define ENABLE_C1E_MASK 0x18000000 -#define CPUID_PROCESSOR_SIGNATURE 1 -#define CPUID_XFAM 0x0ff00000 -#define CPUID_XFAM_K8 0x00000000 -#define CPUID_XFAM_10H 0x00100000 -#define CPUID_XFAM_11H 0x00200000 -#define CPUID_XMOD 0x000f0000 -#define CPUID_XMOD_REV_F 0x00040000 - -/* AMD systems with C1E don't have a working lAPIC timer. Check for that. */ -static __cpuinit int amd_apic_timer_broken(void) -{ - u32 lo, hi; - u32 eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); - switch (eax & CPUID_XFAM) { - case CPUID_XFAM_K8: - if ((eax & CPUID_XMOD) < CPUID_XMOD_REV_F) - break; - case CPUID_XFAM_10H: - case CPUID_XFAM_11H: - rdmsr(MSR_K8_ENABLE_C1E, lo, hi); - if (lo & ENABLE_C1E_MASK) { - if (smp_processor_id() != boot_cpu_physical_apicid) - printk(KERN_INFO "AMD C1E detected late. " - " Force timer broadcast.\n"); - return 1; - } - break; - default: - /* err on the side of caution */ - return 1; - } - return 0; -} -#endif - int force_mwait __cpuinitdata; static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) @@ -297,11 +260,6 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) num_cache_leaves = 3; } -#ifdef CONFIG_X86_LOCAL_APIC - if (amd_apic_timer_broken()) - local_apic_timer_disabled = 1; -#endif - /* K6s reports MCEs but don't actually have all the MSRs */ if (c->x86 < 6) clear_cpu_cap(c, X86_FEATURE_MCE); diff --git a/arch/x86/kernel/cpu/amd_64.c b/arch/x86/kernel/cpu/amd_64.c new file mode 100644 index 000000000000..30b7557c9641 --- /dev/null +++ b/arch/x86/kernel/cpu/amd_64.c @@ -0,0 +1,211 @@ +#include <linux/init.h> +#include <linux/mm.h> + +#include <asm/numa_64.h> +#include <asm/mmconfig.h> +#include <asm/cacheflush.h> + +#include <mach_apic.h> + +#include "cpu.h" + +int force_mwait __cpuinitdata; + +#ifdef CONFIG_NUMA +static int __cpuinit nearby_node(int apicid) +{ + int i, node; + + for (i = apicid - 1; i >= 0; i--) { + node = apicid_to_node[i]; + if (node != NUMA_NO_NODE && node_online(node)) + return node; + } + for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) { + node = apicid_to_node[i]; + if (node != NUMA_NO_NODE && node_online(node)) + return node; + } + return first_node(node_online_map); /* Shouldn't happen */ +} +#endif + +/* + * On a AMD dual core setup the lower bits of the APIC id distingush the cores. + * Assumes number of cores is a power of two. + */ +static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c) +{ +#ifdef CONFIG_SMP + unsigned bits; +#ifdef CONFIG_NUMA + int cpu = smp_processor_id(); + int node = 0; + unsigned apicid = hard_smp_processor_id(); +#endif + bits = c->x86_coreid_bits; + + /* Low order bits define the core id (index of core in socket) */ + c->cpu_core_id = c->initial_apicid & ((1 << bits)-1); + /* Convert the initial APIC ID into the socket ID */ + c->phys_proc_id = c->initial_apicid >> bits; + +#ifdef CONFIG_NUMA + node = c->phys_proc_id; + if (apicid_to_node[apicid] != NUMA_NO_NODE) + node = apicid_to_node[apicid]; + if (!node_online(node)) { + /* Two possibilities here: + - The CPU is missing memory and no node was created. + In that case try picking one from a nearby CPU + - The APIC IDs differ from the HyperTransport node IDs + which the K8 northbridge parsing fills in. + Assume they are all increased by a constant offset, + but in the same order as the HT nodeids. + If that doesn't result in a usable node fall back to the + path for the previous case. */ + + int ht_nodeid = c->initial_apicid; + + if (ht_nodeid >= 0 && + apicid_to_node[ht_nodeid] != NUMA_NO_NODE) + node = apicid_to_node[ht_nodeid]; + /* Pick a nearby node */ + if (!node_online(node)) + node = nearby_node(apicid); + } + numa_set_node(cpu, node); + + printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); +#endif +#endif +} + +static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c) +{ +#ifdef CONFIG_SMP + unsigned bits, ecx; + + /* Multi core CPU? */ + if (c->extended_cpuid_level < 0x80000008) + return; + + ecx = cpuid_ecx(0x80000008); + + c->x86_max_cores = (ecx & 0xff) + 1; + + /* CPU telling us the core id bits shift? */ + bits = (ecx >> 12) & 0xF; + + /* Otherwise recompute */ + if (bits == 0) { + while ((1 << bits) < c->x86_max_cores) + bits++; + } + + c->x86_coreid_bits = bits; + +#endif +} + +static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) +{ + early_init_amd_mc(c); + + /* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */ + if (c->x86_power & (1<<8)) + set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); +} + +static void __cpuinit init_amd(struct cpuinfo_x86 *c) +{ + unsigned level; + +#ifdef CONFIG_SMP + unsigned long value; + + /* + * Disable TLB flush filter by setting HWCR.FFDIS on K8 + * bit 6 of msr C001_0015 + * + * Errata 63 for SH-B3 steppings + * Errata 122 for all steppings (F+ have it disabled by default) + */ + if (c->x86 == 15) { + rdmsrl(MSR_K8_HWCR, value); + value |= 1 << 6; + wrmsrl(MSR_K8_HWCR, value); + } +#endif + + /* Bit 31 in normal CPUID used for nonstandard 3DNow ID; + 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */ + clear_cpu_cap(c, 0*32+31); + + /* On C+ stepping K8 rep microcode works well for copy/memset */ + level = cpuid_eax(1); + if (c->x86 == 15 && ((level >= 0x0f48 && level < 0x0f50) || + level >= 0x0f58)) + set_cpu_cap(c, X86_FEATURE_REP_GOOD); + if (c->x86 == 0x10 || c->x86 == 0x11) + set_cpu_cap(c, X86_FEATURE_REP_GOOD); + + /* Enable workaround for FXSAVE leak */ + if (c->x86 >= 6) + set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK); + + level = get_model_name(c); + if (!level) { + switch (c->x86) { + case 15: + /* Should distinguish Models here, but this is only + a fallback anyways. */ + strcpy(c->x86_model_id, "Hammer"); + break; + } + } + display_cacheinfo(c); + + /* Multi core CPU? */ + if (c->extended_cpuid_level >= 0x80000008) + amd_detect_cmp(c); + + if (c->extended_cpuid_level >= 0x80000006 && + (cpuid_edx(0x80000006) & 0xf000)) + num_cache_leaves = 4; + else + num_cache_leaves = 3; + + if (c->x86 == 0xf || c->x86 == 0x10 || c->x86 == 0x11) + set_cpu_cap(c, X86_FEATURE_K8); + + /* MFENCE stops RDTSC speculation */ + set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC); + + if (c->x86 == 0x10) + fam10h_check_enable_mmcfg(); + + if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) { + unsigned long long tseg; + + /* + * Split up direct mapping around the TSEG SMM area. + * Don't do it for gbpages because there seems very little + * benefit in doing so. + */ + if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg) && + (tseg >> PMD_SHIFT) < + (max_pfn_mapped >> (PMD_SHIFT-PAGE_SHIFT))) + set_memory_4k((unsigned long)__va(tseg), 1); + } +} + +static struct cpu_dev amd_cpu_dev __cpuinitdata = { + .c_vendor = "AMD", + .c_ident = { "AuthenticAMD" }, + .c_early_init = early_init_amd, + .c_init = init_amd, +}; + +cpu_vendor_dev_register(X86_VENDOR_AMD, &amd_cpu_dev); + diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c index 170d2f5523b2..1b1c56bb338f 100644 --- a/arch/x86/kernel/cpu/bugs.c +++ b/arch/x86/kernel/cpu/bugs.c @@ -59,8 +59,12 @@ static void __init check_fpu(void) return; } -/* trap_init() enabled FXSR and company _before_ testing for FP problems here. */ - /* Test for the divl bug.. */ + /* + * trap_init() enabled FXSR and company _before_ testing for FP + * problems here. + * + * Test for the divl bug.. + */ __asm__("fninit\n\t" "fldl %1\n\t" "fdivl %2\n\t" @@ -108,10 +112,15 @@ static void __init check_popad(void) "movl $12345678,%%eax; movl $0,%%edi; pusha; popa; movl (%%edx,%%edi),%%ecx " : "=&a" (res) : "d" (inp) - : "ecx", "edi" ); - /* If this fails, it means that any user program may lock the CPU hard. Too bad. */ - if (res != 12345678) printk( "Buggy.\n" ); - else printk( "OK.\n" ); + : "ecx", "edi"); + /* + * If this fails, it means that any user program may lock the + * CPU hard. Too bad. + */ + if (res != 12345678) + printk("Buggy.\n"); + else + printk("OK.\n"); #endif } @@ -137,7 +146,8 @@ static void __init check_config(void) * i486+ only features! (WP works in supervisor mode and the * new "invlpg" and "bswap" instructions) */ -#if defined(CONFIG_X86_WP_WORKS_OK) || defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_BSWAP) +#if defined(CONFIG_X86_WP_WORKS_OK) || defined(CONFIG_X86_INVLPG) || \ + defined(CONFIG_X86_BSWAP) if (boot_cpu_data.x86 == 3) panic("Kernel requires i486+ for 'invlpg' and other features"); #endif @@ -170,6 +180,7 @@ void __init check_bugs(void) check_fpu(); check_hlt(); check_popad(); - init_utsname()->machine[1] = '0' + (boot_cpu_data.x86 > 6 ? 6 : boot_cpu_data.x86); + init_utsname()->machine[1] = + '0' + (boot_cpu_data.x86 > 6 ? 6 : boot_cpu_data.x86); alternative_instructions(); } diff --git a/arch/x86/kernel/bugs_64.c b/arch/x86/kernel/cpu/bugs_64.c index 9a3ed0649d4e..9a3ed0649d4e 100644 --- a/arch/x86/kernel/bugs_64.c +++ b/arch/x86/kernel/cpu/bugs_64.c diff --git a/arch/x86/kernel/cpu/centaur_64.c b/arch/x86/kernel/cpu/centaur_64.c new file mode 100644 index 000000000000..13526fd5cce1 --- /dev/null +++ b/arch/x86/kernel/cpu/centaur_64.c @@ -0,0 +1,43 @@ +#include <linux/init.h> +#include <linux/smp.h> + +#include <asm/cpufeature.h> +#include <asm/processor.h> + +#include "cpu.h" + +static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c) +{ + if (c->x86 == 0x6 && c->x86_model >= 0xf) + set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); +} + +static void __cpuinit init_centaur(struct cpuinfo_x86 *c) +{ + /* Cache sizes */ + unsigned n; + + n = c->extended_cpuid_level; + if (n >= 0x80000008) { + unsigned eax = cpuid_eax(0x80000008); + c->x86_virt_bits = (eax >> 8) & 0xff; + c->x86_phys_bits = eax & 0xff; + } + + if (c->x86 == 0x6 && c->x86_model >= 0xf) { + c->x86_cache_alignment = c->x86_clflush_size * 2; + set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); + set_cpu_cap(c, X86_FEATURE_REP_GOOD); + } + set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); +} + +static struct cpu_dev centaur_cpu_dev __cpuinitdata = { + .c_vendor = "Centaur", + .c_ident = { "CentaurHauls" }, + .c_early_init = early_init_centaur, + .c_init = init_centaur, +}; + +cpu_vendor_dev_register(X86_VENDOR_CENTAUR, ¢aur_cpu_dev); + diff --git a/arch/x86/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h index 783691b2a738..4d894e8565fe 100644 --- a/arch/x86/kernel/cpu/cpu.h +++ b/arch/x86/kernel/cpu/cpu.h @@ -1,3 +1,6 @@ +#ifndef ARCH_X86_CPU_H + +#define ARCH_X86_CPU_H struct cpu_model_info { int vendor; @@ -36,3 +39,5 @@ extern struct cpu_vendor_dev __x86cpuvendor_start[], __x86cpuvendor_end[]; extern int get_model_name(struct cpuinfo_x86 *c); extern void display_cacheinfo(struct cpuinfo_x86 *c); + +#endif diff --git a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c index f03e9153618e..965ea52767ac 100644 --- a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c +++ b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c @@ -26,9 +26,10 @@ #define NFORCE2_SAFE_DISTANCE 50 /* Delay in ms between FSB changes */ -//#define NFORCE2_DELAY 10 +/* #define NFORCE2_DELAY 10 */ -/* nforce2_chipset: +/* + * nforce2_chipset: * FSB is changed using the chipset */ static struct pci_dev *nforce2_chipset_dev; @@ -36,13 +37,13 @@ static struct pci_dev *nforce2_chipset_dev; /* fid: * multiplier * 10 */ -static int fid = 0; +static int fid; /* min_fsb, max_fsb: * minimum and maximum FSB (= FSB at boot time) */ -static int min_fsb = 0; -static int max_fsb = 0; +static int min_fsb; +static int max_fsb; MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>"); MODULE_DESCRIPTION("nForce2 FSB changing cpufreq driver"); @@ -53,7 +54,7 @@ module_param(min_fsb, int, 0444); MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)"); MODULE_PARM_DESC(min_fsb, - "Minimum FSB to use, if not defined: current FSB - 50"); + "Minimum FSB to use, if not defined: current FSB - 50"); #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "cpufreq-nforce2", msg) @@ -139,7 +140,7 @@ static unsigned int nforce2_fsb_read(int bootfsb) /* Get chipset boot FSB from subdevice 5 (FSB at boot-time) */ nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, - 0x01EF,PCI_ANY_ID,PCI_ANY_ID,NULL); + 0x01EF, PCI_ANY_ID, PCI_ANY_ID, NULL); if (!nforce2_sub5) return 0; @@ -147,13 +148,13 @@ static unsigned int nforce2_fsb_read(int bootfsb) fsb /= 1000000; /* Check if PLL register is already set */ - pci_read_config_byte(nforce2_chipset_dev,NFORCE2_PLLENABLE, (u8 *)&temp); + pci_read_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8 *)&temp); - if(bootfsb || !temp) + if (bootfsb || !temp) return fsb; - + /* Use PLL register FSB value */ - pci_read_config_dword(nforce2_chipset_dev,NFORCE2_PLLREG, &temp); + pci_read_config_dword(nforce2_chipset_dev, NFORCE2_PLLREG, &temp); fsb = nforce2_calc_fsb(temp); return fsb; @@ -184,7 +185,7 @@ static int nforce2_set_fsb(unsigned int fsb) } /* First write? Then set actual value */ - pci_read_config_byte(nforce2_chipset_dev,NFORCE2_PLLENABLE, (u8 *)&temp); + pci_read_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8 *)&temp); if (!temp) { pll = nforce2_calc_pll(tfsb); @@ -210,7 +211,8 @@ static int nforce2_set_fsb(unsigned int fsb) tfsb--; /* Calculate the PLL reg. value */ - if ((pll = nforce2_calc_pll(tfsb)) == -1) + pll = nforce2_calc_pll(tfsb); + if (pll == -1) return -EINVAL; nforce2_write_pll(pll); @@ -249,7 +251,7 @@ static unsigned int nforce2_get(unsigned int cpu) static int nforce2_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { -// unsigned long flags; +/* unsigned long flags; */ struct cpufreq_freqs freqs; unsigned int target_fsb; @@ -271,17 +273,17 @@ static int nforce2_target(struct cpufreq_policy *policy, cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); /* Disable IRQs */ - //local_irq_save(flags); + /* local_irq_save(flags); */ if (nforce2_set_fsb(target_fsb) < 0) printk(KERN_ERR "cpufreq: Changing FSB to %d failed\n", - target_fsb); + target_fsb); else dprintk("Changed FSB successfully to %d\n", - target_fsb); + target_fsb); /* Enable IRQs */ - //local_irq_restore(flags); + /* local_irq_restore(flags); */ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); @@ -302,8 +304,8 @@ static int nforce2_verify(struct cpufreq_policy *policy) policy->max = (fsb_pol_max + 1) * fid * 100; cpufreq_verify_within_limits(policy, - policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); + policy->cpuinfo.min_freq, + policy->cpuinfo.max_freq); return 0; } @@ -347,7 +349,7 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy) /* Set maximum FSB to FSB at boot time */ max_fsb = nforce2_fsb_read(1); - if(!max_fsb) + if (!max_fsb) return -EIO; if (!min_fsb) diff --git a/arch/x86/kernel/cpu/cpufreq/longrun.c b/arch/x86/kernel/cpu/cpufreq/longrun.c index af4a867a097c..777a7ff075de 100644 --- a/arch/x86/kernel/cpu/cpufreq/longrun.c +++ b/arch/x86/kernel/cpu/cpufreq/longrun.c @@ -245,7 +245,7 @@ static unsigned int __init longrun_determine_freqs(unsigned int *low_freq, if ((ecx > 95) || (ecx == 0) || (eax < ebx)) return -EIO; - edx = (eax - ebx) / (100 - ecx); + edx = ((eax - ebx) * 100) / (100 - ecx); *low_freq = edx * 1000; /* back to kHz */ dprintk("low frequency is %u kHz\n", *low_freq); diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index 46d4034d9f37..206791eb46e3 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -1127,12 +1127,23 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) * an UP version, and is deprecated by AMD. */ if (num_online_cpus() != 1) { - printk(KERN_ERR PFX "MP systems not supported by PSB BIOS structure\n"); +#ifndef CONFIG_ACPI_PROCESSOR + printk(KERN_ERR PFX "ACPI Processor support is required " + "for SMP systems but is absent. Please load the " + "ACPI Processor module before starting this " + "driver.\n"); +#else + printk(KERN_ERR PFX "Your BIOS does not provide ACPI " + "_PSS objects in a way that Linux understands. " + "Please report this to the Linux ACPI maintainers" + " and complain to your BIOS vendor.\n"); +#endif kfree(data); return -ENODEV; } if (pol->cpu != 0) { - printk(KERN_ERR PFX "No _PSS objects for CPU other than CPU0\n"); + printk(KERN_ERR PFX "No ACPI _PSS objects for CPU other than " + "CPU0. Complain to your BIOS vendor.\n"); kfree(data); return -ENODEV; } diff --git a/arch/x86/kernel/cpu/intel_64.c b/arch/x86/kernel/cpu/intel_64.c new file mode 100644 index 000000000000..fcb1cc9d75ca --- /dev/null +++ b/arch/x86/kernel/cpu/intel_64.c @@ -0,0 +1,103 @@ +#include <linux/init.h> +#include <linux/smp.h> +#include <asm/processor.h> +#include <asm/ptrace.h> +#include <asm/topology.h> +#include <asm/numa_64.h> + +#include "cpu.h" + +static void __cpuinit early_init_intel(struct cpuinfo_x86 *c) +{ + if ((c->x86 == 0xf && c->x86_model >= 0x03) || + (c->x86 == 0x6 && c->x86_model >= 0x0e)) + set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); +} + +/* + * find out the number of processor cores on the die + */ +static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c) +{ + unsigned int eax, t; + + if (c->cpuid_level < 4) + return 1; + + cpuid_count(4, 0, &eax, &t, &t, &t); + + if (eax & 0x1f) + return ((eax >> 26) + 1); + else + return 1; +} + +static void __cpuinit srat_detect_node(void) +{ +#ifdef CONFIG_NUMA + unsigned node; + int cpu = smp_processor_id(); + int apicid = hard_smp_processor_id(); + + /* Don't do the funky fallback heuristics the AMD version employs + for now. */ + node = apicid_to_node[apicid]; + if (node == NUMA_NO_NODE || !node_online(node)) + node = first_node(node_online_map); + numa_set_node(cpu, node); + + printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); +#endif +} + +static void __cpuinit init_intel(struct cpuinfo_x86 *c) +{ + /* Cache sizes */ + unsigned n; + + init_intel_cacheinfo(c); + if (c->cpuid_level > 9) { + unsigned eax = cpuid_eax(10); + /* Check for version and the number of counters */ + if ((eax & 0xff) && (((eax>>8) & 0xff) > 1)) + set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON); + } + + if (cpu_has_ds) { + unsigned int l1, l2; + rdmsr(MSR_IA32_MISC_ENABLE, l1, l2); + if (!(l1 & (1<<11))) + set_cpu_cap(c, X86_FEATURE_BTS); + if (!(l1 & (1<<12))) + set_cpu_cap(c, X86_FEATURE_PEBS); + } + + + if (cpu_has_bts) + ds_init_intel(c); + + n = c->extended_cpuid_level; + if (n >= 0x80000008) { + unsigned eax = cpuid_eax(0x80000008); + c->x86_virt_bits = (eax >> 8) & 0xff; + c->x86_phys_bits = eax & 0xff; + } + + if (c->x86 == 15) + c->x86_cache_alignment = c->x86_clflush_size * 2; + if (c->x86 == 6) + set_cpu_cap(c, X86_FEATURE_REP_GOOD); + set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); + c->x86_max_cores = intel_num_cpu_cores(c); + + srat_detect_node(); +} + +static struct cpu_dev intel_cpu_dev __cpuinitdata = { + .c_vendor = "Intel", + .c_ident = { "GenuineIntel" }, + .c_early_init = early_init_intel, + .c_init = init_intel, +}; +cpu_vendor_dev_register(X86_VENDOR_INTEL, &intel_cpu_dev); + diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 26d615dcb149..2c8afafa18e8 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -62,6 +62,7 @@ static struct _cache_table cache_table[] __cpuinitdata = { 0x4b, LVL_3, 8192 }, /* 16-way set assoc, 64 byte line size */ { 0x4c, LVL_3, 12288 }, /* 12-way set assoc, 64 byte line size */ { 0x4d, LVL_3, 16384 }, /* 16-way set assoc, 64 byte line size */ + { 0x4e, LVL_2, 6144 }, /* 24-way set assoc, 64 byte line size */ { 0x60, LVL_1_DATA, 16 }, /* 8-way set assoc, sectored cache, 64 byte line size */ { 0x66, LVL_1_DATA, 8 }, /* 4-way set assoc, sectored cache, 64 byte line size */ { 0x67, LVL_1_DATA, 16 }, /* 4-way set assoc, sectored cache, 64 byte line size */ diff --git a/arch/x86/kernel/cpu/mcheck/k7.c b/arch/x86/kernel/cpu/mcheck/k7.c index e633c9c2b764..f390c9f66351 100644 --- a/arch/x86/kernel/cpu/mcheck/k7.c +++ b/arch/x86/kernel/cpu/mcheck/k7.c @@ -9,23 +9,23 @@ #include <linux/interrupt.h> #include <linux/smp.h> -#include <asm/processor.h> +#include <asm/processor.h> #include <asm/system.h> #include <asm/msr.h> #include "mce.h" /* Machine Check Handler For AMD Athlon/Duron */ -static void k7_machine_check(struct pt_regs * regs, long error_code) +static void k7_machine_check(struct pt_regs *regs, long error_code) { - int recover=1; + int recover = 1; u32 alow, ahigh, high, low; u32 mcgstl, mcgsth; int i; - rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth); + rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth); if (mcgstl & (1<<0)) /* Recoverable ? */ - recover=0; + recover = 0; printk(KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n", smp_processor_id(), mcgsth, mcgstl); @@ -60,12 +60,12 @@ static void k7_machine_check(struct pt_regs * regs, long error_code) } if (recover&2) - panic ("CPU context corrupt"); + panic("CPU context corrupt"); if (recover&1) - panic ("Unable to continue"); - printk (KERN_EMERG "Attempting to continue.\n"); + panic("Unable to continue"); + printk(KERN_EMERG "Attempting to continue.\n"); mcgstl &= ~(1<<2); - wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth); + wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth); } @@ -81,25 +81,25 @@ void amd_mcheck_init(struct cpuinfo_x86 *c) machine_check_vector = k7_machine_check; wmb(); - printk (KERN_INFO "Intel machine check architecture supported.\n"); - rdmsr (MSR_IA32_MCG_CAP, l, h); + printk(KERN_INFO "Intel machine check architecture supported.\n"); + rdmsr(MSR_IA32_MCG_CAP, l, h); if (l & (1<<8)) /* Control register present ? */ - wrmsr (MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); + wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); nr_mce_banks = l & 0xff; /* Clear status for MC index 0 separately, we don't touch CTL, * as some K7 Athlons cause spurious MCEs when its enabled. */ if (boot_cpu_data.x86 == 6) { - wrmsr (MSR_IA32_MC0_STATUS, 0x0, 0x0); + wrmsr(MSR_IA32_MC0_STATUS, 0x0, 0x0); i = 1; } else i = 0; - for (; i<nr_mce_banks; i++) { - wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff); - wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0); + for (; i < nr_mce_banks; i++) { + wrmsr(MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff); + wrmsr(MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0); } - set_in_cr4 (X86_CR4_MCE); - printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n", + set_in_cr4(X86_CR4_MCE); + printk(KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n", smp_processor_id()); } diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c index e07e8c068ae0..501ca1cea27d 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_64.c @@ -31,7 +31,7 @@ #include <asm/idle.h> #define MISC_MCELOG_MINOR 227 -#define NR_BANKS 6 +#define NR_SYSFS_BANKS 6 atomic_t mce_entry; @@ -46,7 +46,7 @@ static int mce_dont_init; */ static int tolerant = 1; static int banks; -static unsigned long bank[NR_BANKS] = { [0 ... NR_BANKS-1] = ~0UL }; +static unsigned long bank[NR_SYSFS_BANKS] = { [0 ... NR_SYSFS_BANKS-1] = ~0UL }; static unsigned long notify_user; static int rip_msr; static int mce_bootlog = -1; @@ -209,7 +209,7 @@ void do_machine_check(struct pt_regs * regs, long error_code) barrier(); for (i = 0; i < banks; i++) { - if (!bank[i]) + if (i < NR_SYSFS_BANKS && !bank[i]) continue; m.misc = 0; @@ -444,9 +444,10 @@ static void mce_init(void *dummy) rdmsrl(MSR_IA32_MCG_CAP, cap); banks = cap & 0xff; - if (banks > NR_BANKS) { - printk(KERN_INFO "MCE: warning: using only %d banks\n", banks); - banks = NR_BANKS; + if (banks > MCE_EXTENDED_BANK) { + banks = MCE_EXTENDED_BANK; + printk(KERN_INFO "MCE: warning: using only %d banks\n", + MCE_EXTENDED_BANK); } /* Use accurate RIP reporting if available. */ if ((cap & (1<<9)) && ((cap >> 16) & 0xff) >= 9) @@ -462,7 +463,11 @@ static void mce_init(void *dummy) wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); for (i = 0; i < banks; i++) { - wrmsrl(MSR_IA32_MC0_CTL+4*i, bank[i]); + if (i < NR_SYSFS_BANKS) + wrmsrl(MSR_IA32_MC0_CTL+4*i, bank[i]); + else + wrmsrl(MSR_IA32_MC0_CTL+4*i, ~0UL); + wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0); } } @@ -766,7 +771,10 @@ DEFINE_PER_CPU(struct sys_device, device_mce); } \ static SYSDEV_ATTR(name, 0644, show_ ## name, set_ ## name); -/* TBD should generate these dynamically based on number of available banks */ +/* + * TBD should generate these dynamically based on number of available banks. + * Have only 6 contol banks in /sysfs until then. + */ ACCESSOR(bank0ctl,bank[0],mce_restart()) ACCESSOR(bank1ctl,bank[1],mce_restart()) ACCESSOR(bank2ctl,bank[2],mce_restart()) diff --git a/arch/x86/kernel/cpu/mcheck/p4.c b/arch/x86/kernel/cpu/mcheck/p4.c index cb03345554a5..eef001ad3bde 100644 --- a/arch/x86/kernel/cpu/mcheck/p4.c +++ b/arch/x86/kernel/cpu/mcheck/p4.c @@ -8,7 +8,7 @@ #include <linux/interrupt.h> #include <linux/smp.h> -#include <asm/processor.h> +#include <asm/processor.h> #include <asm/system.h> #include <asm/msr.h> #include <asm/apic.h> @@ -32,12 +32,12 @@ struct intel_mce_extended_msrs { /* u32 *reserved[]; */ }; -static int mce_num_extended_msrs = 0; +static int mce_num_extended_msrs; #ifdef CONFIG_X86_MCE_P4THERMAL static void unexpected_thermal_interrupt(struct pt_regs *regs) -{ +{ printk(KERN_ERR "CPU%d: Unexpected LVT TMR interrupt!\n", smp_processor_id()); add_taint(TAINT_MACHINE_CHECK); @@ -83,7 +83,7 @@ static void intel_init_thermal(struct cpuinfo_x86 *c) * be some SMM goo which handles it, so we can't even put a handler * since it might be delivered via SMI already -zwanem. */ - rdmsr (MSR_IA32_MISC_ENABLE, l, h); + rdmsr(MSR_IA32_MISC_ENABLE, l, h); h = apic_read(APIC_LVTTHMR); if ((l & (1<<3)) && (h & APIC_DM_SMI)) { printk(KERN_DEBUG "CPU%d: Thermal monitoring handled by SMI\n", @@ -91,7 +91,7 @@ static void intel_init_thermal(struct cpuinfo_x86 *c) return; /* -EBUSY */ } - /* check whether a vector already exists, temporarily masked? */ + /* check whether a vector already exists, temporarily masked? */ if (h & APIC_VECTOR_MASK) { printk(KERN_DEBUG "CPU%d: Thermal LVT vector (%#x) already " "installed\n", @@ -104,18 +104,18 @@ static void intel_init_thermal(struct cpuinfo_x86 *c) h |= (APIC_DM_FIXED | APIC_LVT_MASKED); /* we'll mask till we're ready */ apic_write_around(APIC_LVTTHMR, h); - rdmsr (MSR_IA32_THERM_INTERRUPT, l, h); - wrmsr (MSR_IA32_THERM_INTERRUPT, l | 0x03 , h); + rdmsr(MSR_IA32_THERM_INTERRUPT, l, h); + wrmsr(MSR_IA32_THERM_INTERRUPT, l | 0x03 , h); /* ok we're good to go... */ vendor_thermal_interrupt = intel_thermal_interrupt; - - rdmsr (MSR_IA32_MISC_ENABLE, l, h); - wrmsr (MSR_IA32_MISC_ENABLE, l | (1<<3), h); - l = apic_read (APIC_LVTTHMR); - apic_write_around (APIC_LVTTHMR, l & ~APIC_LVT_MASKED); - printk (KERN_INFO "CPU%d: Thermal monitoring enabled\n", cpu); + rdmsr(MSR_IA32_MISC_ENABLE, l, h); + wrmsr(MSR_IA32_MISC_ENABLE, l | (1<<3), h); + + l = apic_read(APIC_LVTTHMR); + apic_write_around(APIC_LVTTHMR, l & ~APIC_LVT_MASKED); + printk(KERN_INFO "CPU%d: Thermal monitoring enabled\n", cpu); /* enable thermal throttle processing */ atomic_set(&therm_throt_en, 1); @@ -129,28 +129,28 @@ static inline void intel_get_extended_msrs(struct intel_mce_extended_msrs *r) { u32 h; - rdmsr (MSR_IA32_MCG_EAX, r->eax, h); - rdmsr (MSR_IA32_MCG_EBX, r->ebx, h); - rdmsr (MSR_IA32_MCG_ECX, r->ecx, h); - rdmsr (MSR_IA32_MCG_EDX, r->edx, h); - rdmsr (MSR_IA32_MCG_ESI, r->esi, h); - rdmsr (MSR_IA32_MCG_EDI, r->edi, h); - rdmsr (MSR_IA32_MCG_EBP, r->ebp, h); - rdmsr (MSR_IA32_MCG_ESP, r->esp, h); - rdmsr (MSR_IA32_MCG_EFLAGS, r->eflags, h); - rdmsr (MSR_IA32_MCG_EIP, r->eip, h); + rdmsr(MSR_IA32_MCG_EAX, r->eax, h); + rdmsr(MSR_IA32_MCG_EBX, r->ebx, h); + rdmsr(MSR_IA32_MCG_ECX, r->ecx, h); + rdmsr(MSR_IA32_MCG_EDX, r->edx, h); + rdmsr(MSR_IA32_MCG_ESI, r->esi, h); + rdmsr(MSR_IA32_MCG_EDI, r->edi, h); + rdmsr(MSR_IA32_MCG_EBP, r->ebp, h); + rdmsr(MSR_IA32_MCG_ESP, r->esp, h); + rdmsr(MSR_IA32_MCG_EFLAGS, r->eflags, h); + rdmsr(MSR_IA32_MCG_EIP, r->eip, h); } -static void intel_machine_check(struct pt_regs * regs, long error_code) +static void intel_machine_check(struct pt_regs *regs, long error_code) { - int recover=1; + int recover = 1; u32 alow, ahigh, high, low; u32 mcgstl, mcgsth; int i; - rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth); + rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth); if (mcgstl & (1<<0)) /* Recoverable ? */ - recover=0; + recover = 0; printk(KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n", smp_processor_id(), mcgsth, mcgstl); @@ -191,20 +191,20 @@ static void intel_machine_check(struct pt_regs * regs, long error_code) } if (recover & 2) - panic ("CPU context corrupt"); + panic("CPU context corrupt"); if (recover & 1) - panic ("Unable to continue"); + panic("Unable to continue"); printk(KERN_EMERG "Attempting to continue.\n"); - /* - * Do not clear the MSR_IA32_MCi_STATUS if the error is not + /* + * Do not clear the MSR_IA32_MCi_STATUS if the error is not * recoverable/continuable.This will allow BIOS to look at the MSRs * for errors if the OS could not log the error. */ - for (i=0; i<nr_mce_banks; i++) { + for (i = 0; i < nr_mce_banks; i++) { u32 msr; msr = MSR_IA32_MC0_STATUS+i*4; - rdmsr (msr, low, high); + rdmsr(msr, low, high); if (high&(1<<31)) { /* Clear it */ wrmsr(msr, 0UL, 0UL); @@ -214,7 +214,7 @@ static void intel_machine_check(struct pt_regs * regs, long error_code) } } mcgstl &= ~(1<<2); - wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth); + wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth); } @@ -222,30 +222,30 @@ void intel_p4_mcheck_init(struct cpuinfo_x86 *c) { u32 l, h; int i; - + machine_check_vector = intel_machine_check; wmb(); - printk (KERN_INFO "Intel machine check architecture supported.\n"); - rdmsr (MSR_IA32_MCG_CAP, l, h); + printk(KERN_INFO "Intel machine check architecture supported.\n"); + rdmsr(MSR_IA32_MCG_CAP, l, h); if (l & (1<<8)) /* Control register present ? */ - wrmsr (MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); + wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); nr_mce_banks = l & 0xff; - for (i=0; i<nr_mce_banks; i++) { - wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff); - wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0); + for (i = 0; i < nr_mce_banks; i++) { + wrmsr(MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff); + wrmsr(MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0); } - set_in_cr4 (X86_CR4_MCE); - printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n", + set_in_cr4(X86_CR4_MCE); + printk(KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n", smp_processor_id()); /* Check for P4/Xeon extended MCE MSRs */ - rdmsr (MSR_IA32_MCG_CAP, l, h); + rdmsr(MSR_IA32_MCG_CAP, l, h); if (l & (1<<9)) {/* MCG_EXT_P */ mce_num_extended_msrs = (l >> 16) & 0xff; - printk (KERN_INFO "CPU%d: Intel P4/Xeon Extended MCE MSRs (%d)" + printk(KERN_INFO "CPU%d: Intel P4/Xeon Extended MCE MSRs (%d)" " available\n", smp_processor_id(), mce_num_extended_msrs); diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c index 9f51e1ea9e82..84fd9f2a28ff 100644 --- a/arch/x86/kernel/early-quirks.c +++ b/arch/x86/kernel/early-quirks.c @@ -98,17 +98,6 @@ static void __init nvidia_bugs(int num, int slot, int func) } -static void __init ati_bugs(int num, int slot, int func) -{ -#ifdef CONFIG_X86_IO_APIC - if (timer_over_8254 == 1) { - timer_over_8254 = 0; - printk(KERN_INFO - "ATI board detected. Disabling timer routing over 8254.\n"); - } -#endif -} - #define QFLAG_APPLY_ONCE 0x1 #define QFLAG_APPLIED 0x2 #define QFLAG_DONE (QFLAG_APPLY_ONCE|QFLAG_APPLIED) @@ -126,8 +115,6 @@ static struct chipset early_qrk[] __initdata = { PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, nvidia_bugs }, { PCI_VENDOR_ID_VIA, PCI_ANY_ID, PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, via_bugs }, - { PCI_VENDOR_ID_ATI, PCI_ANY_ID, - PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, ati_bugs }, { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB, PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, fix_hypertransport_config }, {} diff --git a/arch/x86/kernel/efi_32.c b/arch/x86/kernel/efi_32.c index 5d23d85624d4..4b63c8e1f13b 100644 --- a/arch/x86/kernel/efi_32.c +++ b/arch/x86/kernel/efi_32.c @@ -49,13 +49,13 @@ void efi_call_phys_prelog(void) local_irq_save(efi_rt_eflags); /* - * If I don't have PSE, I should just duplicate two entries in page - * directory. If I have PSE, I just need to duplicate one entry in + * If I don't have PAE, I should just duplicate two entries in page + * directory. If I have PAE, I just need to duplicate one entry in * page directory. */ cr4 = read_cr4(); - if (cr4 & X86_CR4_PSE) { + if (cr4 & X86_CR4_PAE) { efi_bak_pg_dir_pointer[0].pgd = swapper_pg_dir[pgd_index(0)].pgd; swapper_pg_dir[0].pgd = @@ -93,7 +93,7 @@ void efi_call_phys_epilog(void) cr4 = read_cr4(); - if (cr4 & X86_CR4_PSE) { + if (cr4 & X86_CR4_PAE) { swapper_pg_dir[pgd_index(0)].pgd = efi_bak_pg_dir_pointer[0].pgd; } else { diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index 2a609dc3271c..c778e4fa55a2 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -248,6 +248,7 @@ ENTRY(resume_userspace) DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt # setting need_resched or sigpending # between sampling and the iret + TRACE_IRQS_OFF movl TI_flags(%ebp), %ecx andl $_TIF_WORK_MASK, %ecx # is there any work to be done on # int/exception return? diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 556a8df522a7..5cf0aa993f4f 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -420,7 +420,6 @@ END(\label) PTREGSCALL stub_clone, sys_clone, %r8 PTREGSCALL stub_fork, sys_fork, %rdi PTREGSCALL stub_vfork, sys_vfork, %rdi - PTREGSCALL stub_rt_sigsuspend, sys_rt_sigsuspend, %rdx PTREGSCALL stub_sigaltstack, sys_sigaltstack, %rdx PTREGSCALL stub_iopl, sys_iopl, %rsi @@ -1120,10 +1119,6 @@ ENTRY(coprocessor_segment_overrun) zeroentry do_coprocessor_segment_overrun END(coprocessor_segment_overrun) -ENTRY(reserved) - zeroentry do_reserved -END(reserved) - /* runs on exception stack */ ENTRY(double_fault) XCPT_FRAME diff --git a/arch/x86/kernel/geode_32.c b/arch/x86/kernel/geode_32.c index e8edd63ab000..9b08e852fd1a 100644 --- a/arch/x86/kernel/geode_32.c +++ b/arch/x86/kernel/geode_32.c @@ -166,6 +166,8 @@ int geode_has_vsa2(void) static int has_vsa2 = -1; if (has_vsa2 == -1) { + u16 val; + /* * The VSA has virtual registers that we can query for a * signature. @@ -173,7 +175,8 @@ int geode_has_vsa2(void) outw(VSA_VR_UNLOCK, VSA_VRC_INDEX); outw(VSA_VR_SIGNATURE, VSA_VRC_INDEX); - has_vsa2 = (inw(VSA_VRC_DATA) == VSA_SIG); + val = inw(VSA_VRC_DATA); + has_vsa2 = (val == AMD_VSA_SIG || val == GSW_VSA_SIG); } return has_vsa2; diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index b2cc73768a9d..f7357cc0162c 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -189,7 +189,7 @@ default_entry: * this stage. */ -#define KPMDS ((0x100000000-__PAGE_OFFSET) >> 30) /* Number of kernel PMDs */ +#define KPMDS (((-__PAGE_OFFSET) >> 30) & 3) /* Number of kernel PMDs */ xorl %ebx,%ebx /* %ebx is kept at zero */ diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 10a1955bb1d1..263b9d14753e 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -18,6 +18,7 @@ #include <asm/page.h> #include <asm/msr.h> #include <asm/cache.h> +#include <asm/processor-flags.h> #ifdef CONFIG_PARAVIRT #include <asm/asm-offsets.h> @@ -128,7 +129,7 @@ ident_complete: /* Fixup phys_base */ addq %rbp, phys_base(%rip) -#ifdef CONFIG_SMP +#ifdef CONFIG_X86_TRAMPOLINE addq %rbp, trampoline_level4_pgt + 0(%rip) addq %rbp, trampoline_level4_pgt + (511*8)(%rip) #endif @@ -154,9 +155,7 @@ ENTRY(secondary_startup_64) */ /* Enable PAE mode and PGE */ - xorq %rax, %rax - btsq $5, %rax - btsq $7, %rax + movl $(X86_CR4_PAE | X86_CR4_PGE), %eax movq %rax, %cr4 /* Setup early boot stage 4 level pagetables. */ @@ -184,14 +183,10 @@ ENTRY(secondary_startup_64) 1: wrmsr /* Make changes effective */ /* Setup cr0 */ -#define CR0_PM 1 /* protected mode */ -#define CR0_MP (1<<1) -#define CR0_ET (1<<4) -#define CR0_NE (1<<5) -#define CR0_WP (1<<16) -#define CR0_AM (1<<18) -#define CR0_PAGING (1<<31) - movl $CR0_PM|CR0_MP|CR0_ET|CR0_NE|CR0_WP|CR0_AM|CR0_PAGING,%eax +#define CR0_STATE (X86_CR0_PE | X86_CR0_MP | X86_CR0_ET | \ + X86_CR0_NE | X86_CR0_WP | X86_CR0_AM | \ + X86_CR0_PG) + movl $CR0_STATE, %eax /* Make changes effective */ movq %rax, %cr0 @@ -327,11 +322,11 @@ early_idt_ripmsg: ENTRY(name) /* Automate the creation of 1 to 1 mapping pmd entries */ -#define PMDS(START, PERM, COUNT) \ - i = 0 ; \ - .rept (COUNT) ; \ - .quad (START) + (i << 21) + (PERM) ; \ - i = i + 1 ; \ +#define PMDS(START, PERM, COUNT) \ + i = 0 ; \ + .rept (COUNT) ; \ + .quad (START) + (i << PMD_SHIFT) + (PERM) ; \ + i = i + 1 ; \ .endr /* diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index 9b5cfcdfc426..ea230ec69057 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -17,7 +17,7 @@ /* FSEC = 10^-15 NSEC = 10^-9 */ -#define FSEC_PER_NSEC 1000000 +#define FSEC_PER_NSEC 1000000L /* * HPET address is set in acpi/boot.c, when an ACPI entry exists @@ -206,20 +206,19 @@ static void hpet_enable_legacy_int(void) static void hpet_legacy_clockevent_register(void) { - uint64_t hpet_freq; - /* Start HPET legacy interrupts */ hpet_enable_legacy_int(); /* - * The period is a femto seconds value. We need to calculate the - * scaled math multiplication factor for nanosecond to hpet tick - * conversion. + * The mult factor is defined as (include/linux/clockchips.h) + * mult/2^shift = cyc/ns (in contrast to ns/cyc in clocksource.h) + * hpet_period is in units of femtoseconds (per cycle), so + * mult/2^shift = cyc/ns = 10^6/hpet_period + * mult = (10^6 * 2^shift)/hpet_period + * mult = (FSEC_PER_NSEC << hpet_clockevent.shift)/hpet_period */ - hpet_freq = 1000000000000000ULL; - do_div(hpet_freq, hpet_period); - hpet_clockevent.mult = div_sc((unsigned long) hpet_freq, - NSEC_PER_SEC, hpet_clockevent.shift); + hpet_clockevent.mult = div_sc((unsigned long) FSEC_PER_NSEC, + hpet_period, hpet_clockevent.shift); /* Calculate the min / max delta */ hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF, &hpet_clockevent); @@ -324,7 +323,7 @@ static struct clocksource clocksource_hpet = { static int hpet_clocksource_register(void) { - u64 tmp, start, now; + u64 start, now; cycle_t t1; /* Start the counter */ @@ -351,21 +350,15 @@ static int hpet_clocksource_register(void) return -ENODEV; } - /* Initialize and register HPET clocksource - * - * hpet period is in femto seconds per cycle - * so we need to convert this to ns/cyc units - * approximated by mult/2^shift - * - * fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift - * fsec/cyc * 1ns/1000000fsec * 2^shift = mult - * fsec/cyc * 2^shift * 1nsec/1000000fsec = mult - * (fsec/cyc << shift)/1000000 = mult - * (hpet_period << shift)/FSEC_PER_NSEC = mult + /* + * The definition of mult is (include/linux/clocksource.h) + * mult/2^shift = ns/cyc and hpet_period is in units of fsec/cyc + * so we first need to convert hpet_period to ns/cyc units: + * mult/2^shift = ns/cyc = hpet_period/10^6 + * mult = (hpet_period * 2^shift)/10^6 + * mult = (hpet_period << shift)/FSEC_PER_NSEC */ - tmp = (u64)hpet_period << HPET_SHIFT; - do_div(tmp, FSEC_PER_NSEC); - clocksource_hpet.mult = (u32)tmp; + clocksource_hpet.mult = div_sc(hpet_period, FSEC_PER_NSEC, HPET_SHIFT); clocksource_register(&clocksource_hpet); diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c index e03cc952f233..95e80e5033c3 100644 --- a/arch/x86/kernel/i387.c +++ b/arch/x86/kernel/i387.c @@ -56,6 +56,11 @@ void __cpuinit mxcsr_feature_mask_init(void) void __init init_thread_xstate(void) { + if (!HAVE_HWFP) { + xstate_size = sizeof(struct i387_soft_struct); + return; + } + if (cpu_has_fxsr) xstate_size = sizeof(struct i387_fxsave_struct); #ifdef CONFIG_X86_32 @@ -94,7 +99,7 @@ void __cpuinit fpu_init(void) int init_fpu(struct task_struct *tsk) { if (tsk_used_math(tsk)) { - if (tsk == current) + if (HAVE_HWFP && tsk == current) unlazy_fpu(tsk); return 0; } @@ -109,6 +114,15 @@ int init_fpu(struct task_struct *tsk) return -ENOMEM; } +#ifdef CONFIG_X86_32 + if (!HAVE_HWFP) { + memset(tsk->thread.xstate, 0, xstate_size); + finit(); + set_stopped_child_used_math(tsk); + return 0; + } +#endif + if (cpu_has_fxsr) { struct i387_fxsave_struct *fx = &tsk->thread.xstate->fxsave; @@ -148,7 +162,7 @@ int xfpregs_get(struct task_struct *target, const struct user_regset *regset, int ret; if (!cpu_has_fxsr) - return -ENODEV; + return -EIO; ret = init_fpu(target); if (ret) @@ -165,7 +179,7 @@ int xfpregs_set(struct task_struct *target, const struct user_regset *regset, int ret; if (!cpu_has_fxsr) - return -ENODEV; + return -EIO; ret = init_fpu(target); if (ret) @@ -330,13 +344,13 @@ int fpregs_get(struct task_struct *target, const struct user_regset *regset, struct user_i387_ia32_struct env; int ret; - if (!HAVE_HWFP) - return fpregs_soft_get(target, regset, pos, count, kbuf, ubuf); - ret = init_fpu(target); if (ret) return ret; + if (!HAVE_HWFP) + return fpregs_soft_get(target, regset, pos, count, kbuf, ubuf); + if (!cpu_has_fxsr) { return user_regset_copyout(&pos, &count, &kbuf, &ubuf, &target->thread.xstate->fsave, 0, @@ -360,15 +374,15 @@ int fpregs_set(struct task_struct *target, const struct user_regset *regset, struct user_i387_ia32_struct env; int ret; - if (!HAVE_HWFP) - return fpregs_soft_set(target, regset, pos, count, kbuf, ubuf); - ret = init_fpu(target); if (ret) return ret; set_stopped_child_used_math(target); + if (!HAVE_HWFP) + return fpregs_soft_set(target, regset, pos, count, kbuf, ubuf); + if (!cpu_has_fxsr) { return user_regset_copyin(&pos, &count, &kbuf, &ubuf, &target->thread.xstate->fsave, 0, -1); @@ -474,18 +488,18 @@ static int restore_i387_fxsave(struct _fpstate_ia32 __user *buf) int restore_i387_ia32(struct _fpstate_ia32 __user *buf) { int err; + struct task_struct *tsk = current; - if (HAVE_HWFP) { - struct task_struct *tsk = current; - + if (HAVE_HWFP) clear_fpu(tsk); - if (!used_math()) { - err = init_fpu(tsk); - if (err) - return err; - } + if (!used_math()) { + err = init_fpu(tsk); + if (err) + return err; + } + if (HAVE_HWFP) { if (cpu_has_fxsr) err = restore_i387_fxsave(buf); else diff --git a/arch/x86/kernel/i8259_32.c b/arch/x86/kernel/i8259.c index fe631967d625..7a0fda8f01b5 100644 --- a/arch/x86/kernel/i8259_32.c +++ b/arch/x86/kernel/i8259.c @@ -1,8 +1,10 @@ +#include <linux/linkage.h> #include <linux/errno.h> #include <linux/signal.h> #include <linux/sched.h> #include <linux/ioport.h> #include <linux/interrupt.h> +#include <linux/timex.h> #include <linux/slab.h> #include <linux/random.h> #include <linux/init.h> @@ -10,10 +12,12 @@ #include <linux/sysdev.h> #include <linux/bitops.h> +#include <asm/acpi.h> #include <asm/atomic.h> #include <asm/system.h> #include <asm/io.h> #include <asm/timer.h> +#include <asm/hw_irq.h> #include <asm/pgtable.h> #include <asm/delay.h> #include <asm/desc.h> @@ -32,7 +36,7 @@ static int i8259A_auto_eoi; DEFINE_SPINLOCK(i8259A_lock); static void mask_and_ack_8259A(unsigned int); -static struct irq_chip i8259A_chip = { +struct irq_chip i8259A_chip = { .name = "XT-PIC", .mask = disable_8259A_irq, .disable = disable_8259A_irq, @@ -125,14 +129,14 @@ static inline int i8259A_irq_real(unsigned int irq) int irqmask = 1<<irq; if (irq < 8) { - outb(0x0B,PIC_MASTER_CMD); /* ISR register */ + outb(0x0B, PIC_MASTER_CMD); /* ISR register */ value = inb(PIC_MASTER_CMD) & irqmask; - outb(0x0A,PIC_MASTER_CMD); /* back to the IRR register */ + outb(0x0A, PIC_MASTER_CMD); /* back to the IRR register */ return value; } - outb(0x0B,PIC_SLAVE_CMD); /* ISR register */ + outb(0x0B, PIC_SLAVE_CMD); /* ISR register */ value = inb(PIC_SLAVE_CMD) & (irqmask >> 8); - outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ + outb(0x0A, PIC_SLAVE_CMD); /* back to the IRR register */ return value; } @@ -171,12 +175,14 @@ handle_real_irq: if (irq & 8) { inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ outb(cached_slave_mask, PIC_SLAVE_IMR); - outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */ + /* 'Specific EOI' to slave */ + outb(0x60+(irq&7), PIC_SLAVE_CMD); + /* 'Specific EOI' to master-IRQ2 */ + outb(0x60+PIC_CASCADE_IR, PIC_MASTER_CMD); } else { inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ outb(cached_master_mask, PIC_MASTER_IMR); - outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */ + outb(0x60+irq, PIC_MASTER_CMD); /* 'Specific EOI to master */ } spin_unlock_irqrestore(&i8259A_lock, flags); return; @@ -199,7 +205,8 @@ spurious_8259A_irq: * lets ACK and report it. [once per IRQ] */ if (!(spurious_irq_mask & irqmask)) { - printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); + printk(KERN_DEBUG + "spurious 8259A interrupt: IRQ%d.\n", irq); spurious_irq_mask |= irqmask; } atomic_inc(&irq_err_count); @@ -290,17 +297,34 @@ void init_8259A(int auto_eoi) * outb_pic - this has to work on a wide range of PC hardware. */ outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ +#ifndef CONFIG_X86_64 outb_pic(0x20 + 0, PIC_MASTER_IMR); /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */ outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */ +#else /* CONFIG_X86_64 */ + /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */ + outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR); + /* 8259A-1 (the master) has a slave on IR2 */ + outb_pic(0x04, PIC_MASTER_IMR); +#endif /* CONFIG_X86_64 */ if (auto_eoi) /* master does Auto EOI */ outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); else /* master expects normal EOI */ outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ +#ifndef CONFIG_X86_64 outb_pic(0x20 + 8, PIC_SLAVE_IMR); /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */ outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */ outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */ +#else /* CONFIG_X86_64 */ + /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */ + outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR); + /* 8259A-2 is a slave on master's IR2 */ + outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); + /* (slave's support for AEOI in flat mode is to be investigated) */ + outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); + +#endif /* CONFIG_X86_64 */ if (auto_eoi) /* * In AEOI mode we just have to mask the interrupt @@ -317,93 +341,3 @@ void init_8259A(int auto_eoi) spin_unlock_irqrestore(&i8259A_lock, flags); } - -/* - * Note that on a 486, we don't want to do a SIGFPE on an irq13 - * as the irq is unreliable, and exception 16 works correctly - * (ie as explained in the intel literature). On a 386, you - * can't use exception 16 due to bad IBM design, so we have to - * rely on the less exact irq13. - * - * Careful.. Not only is IRQ13 unreliable, but it is also - * leads to races. IBM designers who came up with it should - * be shot. - */ - - -static irqreturn_t math_error_irq(int cpl, void *dev_id) -{ - extern void math_error(void __user *); - outb(0,0xF0); - if (ignore_fpu_irq || !boot_cpu_data.hard_math) - return IRQ_NONE; - math_error((void __user *)get_irq_regs()->ip); - return IRQ_HANDLED; -} - -/* - * New motherboards sometimes make IRQ 13 be a PCI interrupt, - * so allow interrupt sharing. - */ -static struct irqaction fpu_irq = { - .handler = math_error_irq, - .mask = CPU_MASK_NONE, - .name = "fpu", -}; - -void __init init_ISA_irqs (void) -{ - int i; - -#ifdef CONFIG_X86_LOCAL_APIC - init_bsp_APIC(); -#endif - init_8259A(0); - - /* - * 16 old-style INTA-cycle interrupts: - */ - for (i = 0; i < 16; i++) { - set_irq_chip_and_handler_name(i, &i8259A_chip, - handle_level_irq, "XT"); - } -} - -/* Overridden in paravirt.c */ -void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); - -void __init native_init_IRQ(void) -{ - int i; - - /* all the set up before the call gates are initialised */ - pre_intr_init_hook(); - - /* - * Cover the whole vector space, no vector can escape - * us. (some of these will be overridden and become - * 'special' SMP interrupts) - */ - for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { - int vector = FIRST_EXTERNAL_VECTOR + i; - if (i >= NR_IRQS) - break; - /* SYSCALL_VECTOR was reserved in trap_init. */ - if (!test_bit(vector, used_vectors)) - set_intr_gate(vector, interrupt[i]); - } - - /* setup after call gates are initialised (usually add in - * the architecture specific gates) - */ - intr_init_hook(); - - /* - * External FPU? Set up irq13 if so, for - * original braindamaged IBM FERR coupling. - */ - if (boot_cpu_data.hard_math && !cpu_has_fpu) - setup_irq(FPU_IRQ, &fpu_irq); - - irq_ctx_init(smp_processor_id()); -} diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c deleted file mode 100644 index fa57a1568508..000000000000 --- a/arch/x86/kernel/i8259_64.c +++ /dev/null @@ -1,512 +0,0 @@ -#include <linux/linkage.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/timex.h> -#include <linux/slab.h> -#include <linux/random.h> -#include <linux/init.h> -#include <linux/kernel_stat.h> -#include <linux/sysdev.h> -#include <linux/bitops.h> - -#include <asm/acpi.h> -#include <asm/atomic.h> -#include <asm/system.h> -#include <asm/io.h> -#include <asm/hw_irq.h> -#include <asm/pgtable.h> -#include <asm/delay.h> -#include <asm/desc.h> -#include <asm/apic.h> -#include <asm/i8259.h> - -/* - * Common place to define all x86 IRQ vectors - * - * This builds up the IRQ handler stubs using some ugly macros in irq.h - * - * These macros create the low-level assembly IRQ routines that save - * register context and call do_IRQ(). do_IRQ() then does all the - * operations that are needed to keep the AT (or SMP IOAPIC) - * interrupt-controller happy. - */ - -#define BI(x,y) \ - BUILD_IRQ(x##y) - -#define BUILD_16_IRQS(x) \ - BI(x,0) BI(x,1) BI(x,2) BI(x,3) \ - BI(x,4) BI(x,5) BI(x,6) BI(x,7) \ - BI(x,8) BI(x,9) BI(x,a) BI(x,b) \ - BI(x,c) BI(x,d) BI(x,e) BI(x,f) - -/* - * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: - * (these are usually mapped to vectors 0x30-0x3f) - */ - -/* - * The IO-APIC gives us many more interrupt sources. Most of these - * are unused but an SMP system is supposed to have enough memory ... - * sometimes (mostly wrt. hw bugs) we get corrupted vectors all - * across the spectrum, so we really want to be prepared to get all - * of these. Plus, more powerful systems might have more than 64 - * IO-APIC registers. - * - * (these are usually mapped into the 0x30-0xff vector range) - */ - BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3) -BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7) -BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb) -BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf) - -#undef BUILD_16_IRQS -#undef BI - - -#define IRQ(x,y) \ - IRQ##x##y##_interrupt - -#define IRQLIST_16(x) \ - IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \ - IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \ - IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \ - IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f) - -/* for the irq vectors */ -static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = { - IRQLIST_16(0x2), IRQLIST_16(0x3), - IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7), - IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb), - IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf) -}; - -#undef IRQ -#undef IRQLIST_16 - -/* - * This is the 'legacy' 8259A Programmable Interrupt Controller, - * present in the majority of PC/AT boxes. - * plus some generic x86 specific things if generic specifics makes - * any sense at all. - * this file should become arch/i386/kernel/irq.c when the old irq.c - * moves to arch independent land - */ - -static int i8259A_auto_eoi; -DEFINE_SPINLOCK(i8259A_lock); -static void mask_and_ack_8259A(unsigned int); - -static struct irq_chip i8259A_chip = { - .name = "XT-PIC", - .mask = disable_8259A_irq, - .disable = disable_8259A_irq, - .unmask = enable_8259A_irq, - .mask_ack = mask_and_ack_8259A, -}; - -/* - * 8259A PIC functions to handle ISA devices: - */ - -/* - * This contains the irq mask for both 8259A irq controllers, - */ -unsigned int cached_irq_mask = 0xffff; - -/* - * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) - * boards the timer interrupt is not really connected to any IO-APIC pin, - * it's fed to the master 8259A's IR0 line only. - * - * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. - * this 'mixed mode' IRQ handling costs nothing because it's only used - * at IRQ setup time. - */ -unsigned long io_apic_irqs; - -void disable_8259A_irq(unsigned int irq) -{ - unsigned int mask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask |= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -void enable_8259A_irq(unsigned int irq) -{ - unsigned int mask = ~(1 << irq); - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask &= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -int i8259A_irq_pending(unsigned int irq) -{ - unsigned int mask = 1<<irq; - unsigned long flags; - int ret; - - spin_lock_irqsave(&i8259A_lock, flags); - if (irq < 8) - ret = inb(PIC_MASTER_CMD) & mask; - else - ret = inb(PIC_SLAVE_CMD) & (mask >> 8); - spin_unlock_irqrestore(&i8259A_lock, flags); - - return ret; -} - -void make_8259A_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - io_apic_irqs &= ~(1<<irq); - set_irq_chip_and_handler_name(irq, &i8259A_chip, handle_level_irq, - "XT"); - enable_irq(irq); -} - -/* - * This function assumes to be called rarely. Switching between - * 8259A registers is slow. - * This has to be protected by the irq controller spinlock - * before being called. - */ -static inline int i8259A_irq_real(unsigned int irq) -{ - int value; - int irqmask = 1<<irq; - - if (irq < 8) { - outb(0x0B,PIC_MASTER_CMD); /* ISR register */ - value = inb(PIC_MASTER_CMD) & irqmask; - outb(0x0A,PIC_MASTER_CMD); /* back to the IRR register */ - return value; - } - outb(0x0B,PIC_SLAVE_CMD); /* ISR register */ - value = inb(PIC_SLAVE_CMD) & (irqmask >> 8); - outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ - return value; -} - -/* - * Careful! The 8259A is a fragile beast, it pretty - * much _has_ to be done exactly like this (mask it - * first, _then_ send the EOI, and the order of EOI - * to the two 8259s is important! - */ -static void mask_and_ack_8259A(unsigned int irq) -{ - unsigned int irqmask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - /* - * Lightweight spurious IRQ detection. We do not want - * to overdo spurious IRQ handling - it's usually a sign - * of hardware problems, so we only do the checks we can - * do without slowing down good hardware unnecessarily. - * - * Note that IRQ7 and IRQ15 (the two spurious IRQs - * usually resulting from the 8259A-1|2 PICs) occur - * even if the IRQ is masked in the 8259A. Thus we - * can check spurious 8259A IRQs without doing the - * quite slow i8259A_irq_real() call for every IRQ. - * This does not cover 100% of spurious interrupts, - * but should be enough to warn the user that there - * is something bad going on ... - */ - if (cached_irq_mask & irqmask) - goto spurious_8259A_irq; - cached_irq_mask |= irqmask; - -handle_real_irq: - if (irq & 8) { - inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ - outb(cached_slave_mask, PIC_SLAVE_IMR); - /* 'Specific EOI' to slave */ - outb(0x60+(irq&7),PIC_SLAVE_CMD); - /* 'Specific EOI' to master-IRQ2 */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); - } else { - inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ - outb(cached_master_mask, PIC_MASTER_IMR); - /* 'Specific EOI' to master */ - outb(0x60+irq,PIC_MASTER_CMD); - } - spin_unlock_irqrestore(&i8259A_lock, flags); - return; - -spurious_8259A_irq: - /* - * this is the slow path - should happen rarely. - */ - if (i8259A_irq_real(irq)) - /* - * oops, the IRQ _is_ in service according to the - * 8259A - not spurious, go handle it. - */ - goto handle_real_irq; - - { - static int spurious_irq_mask; - /* - * At this point we can be sure the IRQ is spurious, - * lets ACK and report it. [once per IRQ] - */ - if (!(spurious_irq_mask & irqmask)) { - printk(KERN_DEBUG - "spurious 8259A interrupt: IRQ%d.\n", irq); - spurious_irq_mask |= irqmask; - } - atomic_inc(&irq_err_count); - /* - * Theoretically we do not have to handle this IRQ, - * but in Linux this does not cause problems and is - * simpler for us. - */ - goto handle_real_irq; - } -} - -static char irq_trigger[2]; -/** - * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ - */ -static void restore_ELCR(char *trigger) -{ - outb(trigger[0], 0x4d0); - outb(trigger[1], 0x4d1); -} - -static void save_ELCR(char *trigger) -{ - /* IRQ 0,1,2,8,13 are marked as reserved */ - trigger[0] = inb(0x4d0) & 0xF8; - trigger[1] = inb(0x4d1) & 0xDE; -} - -static int i8259A_resume(struct sys_device *dev) -{ - init_8259A(i8259A_auto_eoi); - restore_ELCR(irq_trigger); - return 0; -} - -static int i8259A_suspend(struct sys_device *dev, pm_message_t state) -{ - save_ELCR(irq_trigger); - return 0; -} - -static int i8259A_shutdown(struct sys_device *dev) -{ - /* Put the i8259A into a quiescent state that - * the kernel initialization code can get it - * out of. - */ - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ - return 0; -} - -static struct sysdev_class i8259_sysdev_class = { - .name = "i8259", - .suspend = i8259A_suspend, - .resume = i8259A_resume, - .shutdown = i8259A_shutdown, -}; - -static struct sys_device device_i8259A = { - .id = 0, - .cls = &i8259_sysdev_class, -}; - -static int __init i8259A_init_sysfs(void) -{ - int error = sysdev_class_register(&i8259_sysdev_class); - if (!error) - error = sysdev_register(&device_i8259A); - return error; -} - -device_initcall(i8259A_init_sysfs); - -void init_8259A(int auto_eoi) -{ - unsigned long flags; - - i8259A_auto_eoi = auto_eoi; - - spin_lock_irqsave(&i8259A_lock, flags); - - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ - - /* - * outb_pic - this has to work on a wide range of PC hardware. - */ - outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ - /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */ - outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR); - /* 8259A-1 (the master) has a slave on IR2 */ - outb_pic(0x04, PIC_MASTER_IMR); - if (auto_eoi) /* master does Auto EOI */ - outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); - else /* master expects normal EOI */ - outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); - - outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ - /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */ - outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR); - /* 8259A-2 is a slave on master's IR2 */ - outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); - /* (slave's support for AEOI in flat mode is to be investigated) */ - outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); - - if (auto_eoi) - /* - * In AEOI mode we just have to mask the interrupt - * when acking. - */ - i8259A_chip.mask_ack = disable_8259A_irq; - else - i8259A_chip.mask_ack = mask_and_ack_8259A; - - udelay(100); /* wait for 8259A to initialize */ - - outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ - outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ - - spin_unlock_irqrestore(&i8259A_lock, flags); -} - - - - -/* - * IRQ2 is cascade interrupt to second interrupt controller - */ - -static struct irqaction irq2 = { - .handler = no_action, - .mask = CPU_MASK_NONE, - .name = "cascade", -}; -DEFINE_PER_CPU(vector_irq_t, vector_irq) = { - [0 ... IRQ0_VECTOR - 1] = -1, - [IRQ0_VECTOR] = 0, - [IRQ1_VECTOR] = 1, - [IRQ2_VECTOR] = 2, - [IRQ3_VECTOR] = 3, - [IRQ4_VECTOR] = 4, - [IRQ5_VECTOR] = 5, - [IRQ6_VECTOR] = 6, - [IRQ7_VECTOR] = 7, - [IRQ8_VECTOR] = 8, - [IRQ9_VECTOR] = 9, - [IRQ10_VECTOR] = 10, - [IRQ11_VECTOR] = 11, - [IRQ12_VECTOR] = 12, - [IRQ13_VECTOR] = 13, - [IRQ14_VECTOR] = 14, - [IRQ15_VECTOR] = 15, - [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 -}; - -void __init init_ISA_irqs (void) -{ - int i; - - init_bsp_APIC(); - init_8259A(0); - - for (i = 0; i < NR_IRQS; i++) { - irq_desc[i].status = IRQ_DISABLED; - irq_desc[i].action = NULL; - irq_desc[i].depth = 1; - - if (i < 16) { - /* - * 16 old-style INTA-cycle interrupts: - */ - set_irq_chip_and_handler_name(i, &i8259A_chip, - handle_level_irq, "XT"); - } else { - /* - * 'high' PCI IRQs filled in on demand - */ - irq_desc[i].chip = &no_irq_chip; - } - } -} - -void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); - -void __init native_init_IRQ(void) -{ - int i; - - init_ISA_irqs(); - /* - * Cover the whole vector space, no vector can escape - * us. (some of these will be overridden and become - * 'special' SMP interrupts) - */ - for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { - int vector = FIRST_EXTERNAL_VECTOR + i; - if (vector != IA32_SYSCALL_VECTOR) - set_intr_gate(vector, interrupt[i]); - } - -#ifdef CONFIG_SMP - /* - * The reschedule interrupt is a CPU-to-CPU reschedule-helper - * IPI, driven by wakeup. - */ - set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); - - /* IPIs for invalidation */ - set_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); - - /* IPI for generic function call */ - set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); - - /* Low priority IPI to cleanup after moving an irq */ - set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); -#endif - set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); - set_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); - - /* self generated IPI for local APIC timer */ - set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); - - /* IPI vectors for APIC spurious and error interrupts */ - set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); - set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); - - if (!acpi_ioapic) - setup_irq(2, &irq2); -} diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index a40d54fc1fdd..d4f9df2b022a 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -58,7 +58,7 @@ static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; static DEFINE_SPINLOCK(ioapic_lock); static DEFINE_SPINLOCK(vector_lock); -int timer_over_8254 __initdata = 1; +int timer_through_8259 __initdata; /* * Is the SiS APIC rmw bug present ? @@ -239,7 +239,7 @@ static void __init replace_pin_at_irq(unsigned int irq, } } -static void __modify_IO_APIC_irq (unsigned int irq, unsigned long enable, unsigned long disable) +static void __modify_IO_APIC_irq(unsigned int irq, unsigned long enable, unsigned long disable) { struct irq_pin_list *entry = irq_2_pin + irq; unsigned int pin, reg; @@ -259,30 +259,32 @@ static void __modify_IO_APIC_irq (unsigned int irq, unsigned long enable, unsign } /* mask = 1 */ -static void __mask_IO_APIC_irq (unsigned int irq) +static void __mask_IO_APIC_irq(unsigned int irq) { - __modify_IO_APIC_irq(irq, 0x00010000, 0); + __modify_IO_APIC_irq(irq, IO_APIC_REDIR_MASKED, 0); } /* mask = 0 */ -static void __unmask_IO_APIC_irq (unsigned int irq) +static void __unmask_IO_APIC_irq(unsigned int irq) { - __modify_IO_APIC_irq(irq, 0, 0x00010000); + __modify_IO_APIC_irq(irq, 0, IO_APIC_REDIR_MASKED); } /* mask = 1, trigger = 0 */ -static void __mask_and_edge_IO_APIC_irq (unsigned int irq) +static void __mask_and_edge_IO_APIC_irq(unsigned int irq) { - __modify_IO_APIC_irq(irq, 0x00010000, 0x00008000); + __modify_IO_APIC_irq(irq, IO_APIC_REDIR_MASKED, + IO_APIC_REDIR_LEVEL_TRIGGER); } /* mask = 0, trigger = 1 */ -static void __unmask_and_level_IO_APIC_irq (unsigned int irq) +static void __unmask_and_level_IO_APIC_irq(unsigned int irq) { - __modify_IO_APIC_irq(irq, 0x00008000, 0x00010000); + __modify_IO_APIC_irq(irq, IO_APIC_REDIR_LEVEL_TRIGGER, + IO_APIC_REDIR_MASKED); } -static void mask_IO_APIC_irq (unsigned int irq) +static void mask_IO_APIC_irq(unsigned int irq) { unsigned long flags; @@ -291,7 +293,7 @@ static void mask_IO_APIC_irq (unsigned int irq) spin_unlock_irqrestore(&ioapic_lock, flags); } -static void unmask_IO_APIC_irq (unsigned int irq) +static void unmask_IO_APIC_irq(unsigned int irq) { unsigned long flags; @@ -303,7 +305,7 @@ static void unmask_IO_APIC_irq (unsigned int irq) static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) { struct IO_APIC_route_entry entry; - + /* Check delivery_mode to be sure we're not clearing an SMI pin */ entry = ioapic_read_entry(apic, pin); if (entry.delivery_mode == dest_SMI) @@ -315,7 +317,7 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) ioapic_mask_entry(apic, pin); } -static void clear_IO_APIC (void) +static void clear_IO_APIC(void) { int apic, pin; @@ -332,7 +334,7 @@ static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask) struct irq_pin_list *entry = irq_2_pin + irq; unsigned int apicid_value; cpumask_t tmp; - + cpus_and(tmp, cpumask, cpu_online_map); if (cpus_empty(tmp)) tmp = TARGET_CPUS; @@ -361,7 +363,7 @@ static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask) # include <linux/kernel_stat.h> /* kstat */ # include <linux/slab.h> /* kmalloc() */ # include <linux/timer.h> - + #define IRQBALANCE_CHECK_ARCH -999 #define MAX_BALANCED_IRQ_INTERVAL (5*HZ) #define MIN_BALANCED_IRQ_INTERVAL (HZ/2) @@ -373,14 +375,14 @@ static int physical_balance __read_mostly; static long balanced_irq_interval __read_mostly = MAX_BALANCED_IRQ_INTERVAL; static struct irq_cpu_info { - unsigned long * last_irq; - unsigned long * irq_delta; + unsigned long *last_irq; + unsigned long *irq_delta; unsigned long irq; } irq_cpu_data[NR_CPUS]; #define CPU_IRQ(cpu) (irq_cpu_data[cpu].irq) -#define LAST_CPU_IRQ(cpu,irq) (irq_cpu_data[cpu].last_irq[irq]) -#define IRQ_DELTA(cpu,irq) (irq_cpu_data[cpu].irq_delta[irq]) +#define LAST_CPU_IRQ(cpu, irq) (irq_cpu_data[cpu].last_irq[irq]) +#define IRQ_DELTA(cpu, irq) (irq_cpu_data[cpu].irq_delta[irq]) #define IDLE_ENOUGH(cpu,now) \ (idle_cpu(cpu) && ((now) - per_cpu(irq_stat, (cpu)).idle_timestamp > 1)) @@ -419,8 +421,8 @@ inside: if (cpu == -1) cpu = NR_CPUS-1; } - } while (!cpu_online(cpu) || !IRQ_ALLOWED(cpu,allowed_mask) || - (search_idle && !IDLE_ENOUGH(cpu,now))); + } while (!cpu_online(cpu) || !IRQ_ALLOWED(cpu, allowed_mask) || + (search_idle && !IDLE_ENOUGH(cpu, now))); return cpu; } @@ -430,15 +432,14 @@ static inline void balance_irq(int cpu, int irq) unsigned long now = jiffies; cpumask_t allowed_mask; unsigned int new_cpu; - + if (irqbalance_disabled) - return; + return; cpus_and(allowed_mask, cpu_online_map, balance_irq_affinity[irq]); new_cpu = move(cpu, allowed_mask, now, 1); - if (cpu != new_cpu) { + if (cpu != new_cpu) set_pending_irq(irq, cpumask_of_cpu(new_cpu)); - } } static inline void rotate_irqs_among_cpus(unsigned long useful_load_threshold) @@ -450,14 +451,14 @@ static inline void rotate_irqs_among_cpus(unsigned long useful_load_threshold) if (!irq_desc[j].action) continue; /* Is it a significant load ? */ - if (IRQ_DELTA(CPU_TO_PACKAGEINDEX(i),j) < + if (IRQ_DELTA(CPU_TO_PACKAGEINDEX(i), j) < useful_load_threshold) continue; balance_irq(i, j); } } balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL, - balanced_irq_interval - BALANCED_IRQ_LESS_DELTA); + balanced_irq_interval - BALANCED_IRQ_LESS_DELTA); return; } @@ -486,22 +487,22 @@ static void do_irq_balance(void) /* Is this an active IRQ or balancing disabled ? */ if (!irq_desc[j].action || irq_balancing_disabled(j)) continue; - if ( package_index == i ) - IRQ_DELTA(package_index,j) = 0; + if (package_index == i) + IRQ_DELTA(package_index, j) = 0; /* Determine the total count per processor per IRQ */ value_now = (unsigned long) kstat_cpu(i).irqs[j]; /* Determine the activity per processor per IRQ */ - delta = value_now - LAST_CPU_IRQ(i,j); + delta = value_now - LAST_CPU_IRQ(i, j); /* Update last_cpu_irq[][] for the next time */ - LAST_CPU_IRQ(i,j) = value_now; + LAST_CPU_IRQ(i, j) = value_now; /* Ignore IRQs whose rate is less than the clock */ if (delta < useful_load_threshold) continue; /* update the load for the processor or package total */ - IRQ_DELTA(package_index,j) += delta; + IRQ_DELTA(package_index, j) += delta; /* Keep track of the higher numbered sibling as well */ if (i != package_index) @@ -527,7 +528,8 @@ static void do_irq_balance(void) max_cpu_irq = ULONG_MAX; tryanothercpu: - /* Look for heaviest loaded processor. + /* + * Look for heaviest loaded processor. * We may come back to get the next heaviest loaded processor. * Skip processors with trivial loads. */ @@ -536,7 +538,7 @@ tryanothercpu: for_each_online_cpu(i) { if (i != CPU_TO_PACKAGEINDEX(i)) continue; - if (max_cpu_irq <= CPU_IRQ(i)) + if (max_cpu_irq <= CPU_IRQ(i)) continue; if (tmp_cpu_irq < CPU_IRQ(i)) { tmp_cpu_irq = CPU_IRQ(i); @@ -545,8 +547,9 @@ tryanothercpu: } if (tmp_loaded == -1) { - /* In the case of small number of heavy interrupt sources, - * loading some of the cpus too much. We use Ingo's original + /* + * In the case of small number of heavy interrupt sources, + * loading some of the cpus too much. We use Ingo's original * approach to rotate them around. */ if (!first_attempt && imbalance >= useful_load_threshold) { @@ -555,13 +558,14 @@ tryanothercpu: } goto not_worth_the_effort; } - + first_attempt = 0; /* heaviest search */ max_cpu_irq = tmp_cpu_irq; /* load */ max_loaded = tmp_loaded; /* processor */ imbalance = (max_cpu_irq - min_cpu_irq) / 2; - - /* if imbalance is less than approx 10% of max load, then + + /* + * if imbalance is less than approx 10% of max load, then * observe diminishing returns action. - quit */ if (imbalance < (max_cpu_irq >> 3)) @@ -577,26 +581,25 @@ tryanotherirq: /* Is this an active IRQ? */ if (!irq_desc[j].action) continue; - if (imbalance <= IRQ_DELTA(max_loaded,j)) + if (imbalance <= IRQ_DELTA(max_loaded, j)) continue; /* Try to find the IRQ that is closest to the imbalance * without going over. */ - if (move_this_load < IRQ_DELTA(max_loaded,j)) { - move_this_load = IRQ_DELTA(max_loaded,j); + if (move_this_load < IRQ_DELTA(max_loaded, j)) { + move_this_load = IRQ_DELTA(max_loaded, j); selected_irq = j; } } - if (selected_irq == -1) { + if (selected_irq == -1) goto tryanothercpu; - } imbalance = move_this_load; - + /* For physical_balance case, we accumulated both load * values in the one of the siblings cpu_irq[], * to use the same code for physical and logical processors - * as much as possible. + * as much as possible. * * NOTE: the cpu_irq[] array holds the sum of the load for * sibling A and sibling B in the slot for the lowest numbered @@ -625,11 +628,11 @@ tryanotherirq: /* mark for change destination */ set_pending_irq(selected_irq, cpumask_of_cpu(min_loaded)); - /* Since we made a change, come back sooner to + /* Since we made a change, come back sooner to * check for more variation. */ balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL, - balanced_irq_interval - BALANCED_IRQ_LESS_DELTA); + balanced_irq_interval - BALANCED_IRQ_LESS_DELTA); return; } goto tryanotherirq; @@ -640,7 +643,7 @@ not_worth_the_effort: * upward */ balanced_irq_interval = min((long)MAX_BALANCED_IRQ_INTERVAL, - balanced_irq_interval + BALANCED_IRQ_MORE_DELTA); + balanced_irq_interval + BALANCED_IRQ_MORE_DELTA); return; } @@ -679,13 +682,13 @@ static int __init balanced_irq_init(void) cpumask_t tmp; cpus_shift_right(tmp, cpu_online_map, 2); - c = &boot_cpu_data; + c = &boot_cpu_data; /* When not overwritten by the command line ask subarchitecture. */ if (irqbalance_disabled == IRQBALANCE_CHECK_ARCH) irqbalance_disabled = NO_BALANCE_IRQ; if (irqbalance_disabled) return 0; - + /* disable irqbalance completely if there is only one processor online */ if (num_online_cpus() < 2) { irqbalance_disabled = 1; @@ -699,16 +702,14 @@ static int __init balanced_irq_init(void) physical_balance = 1; for_each_online_cpu(i) { - irq_cpu_data[i].irq_delta = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); - irq_cpu_data[i].last_irq = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); + irq_cpu_data[i].irq_delta = kzalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); + irq_cpu_data[i].last_irq = kzalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); if (irq_cpu_data[i].irq_delta == NULL || irq_cpu_data[i].last_irq == NULL) { printk(KERN_ERR "balanced_irq_init: out of memory"); goto failed; } - memset(irq_cpu_data[i].irq_delta,0,sizeof(unsigned long) * NR_IRQS); - memset(irq_cpu_data[i].last_irq,0,sizeof(unsigned long) * NR_IRQS); } - + printk(KERN_INFO "Starting balanced_irq\n"); if (!IS_ERR(kthread_run(balanced_irq, NULL, "kirqd"))) return 0; @@ -843,7 +844,7 @@ static int __init find_isa_irq_apic(int irq, int type) } if (i < mp_irq_entries) { int apic; - for(apic = 0; apic < nr_ioapics; apic++) { + for (apic = 0; apic < nr_ioapics; apic++) { if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic) return apic; } @@ -880,7 +881,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) !mp_irqs[i].mpc_irqtype && (bus == lbus) && (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) { - int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq); + int irq = pin_2_irq(i, apic, mp_irqs[i].mpc_dstirq); if (!(apic || IO_APIC_IRQ(irq))) continue; @@ -900,7 +901,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector); /* - * This function currently is only a helper for the i386 smp boot process where + * This function currently is only a helper for the i386 smp boot process where * we need to reprogram the ioredtbls to cater for the cpus which have come online * so mask in all cases should simply be TARGET_CPUS */ @@ -975,37 +976,36 @@ static int MPBIOS_polarity(int idx) /* * Determine IRQ line polarity (high active or low active): */ - switch (mp_irqs[idx].mpc_irqflag & 3) + switch (mp_irqs[idx].mpc_irqflag & 3) { + case 0: /* conforms, ie. bus-type dependent polarity */ { - case 0: /* conforms, ie. bus-type dependent polarity */ - { - polarity = test_bit(bus, mp_bus_not_pci)? - default_ISA_polarity(idx): - default_PCI_polarity(idx); - break; - } - case 1: /* high active */ - { - polarity = 0; - break; - } - case 2: /* reserved */ - { - printk(KERN_WARNING "broken BIOS!!\n"); - polarity = 1; - break; - } - case 3: /* low active */ - { - polarity = 1; - break; - } - default: /* invalid */ - { - printk(KERN_WARNING "broken BIOS!!\n"); - polarity = 1; - break; - } + polarity = test_bit(bus, mp_bus_not_pci)? + default_ISA_polarity(idx): + default_PCI_polarity(idx); + break; + } + case 1: /* high active */ + { + polarity = 0; + break; + } + case 2: /* reserved */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + polarity = 1; + break; + } + case 3: /* low active */ + { + polarity = 1; + break; + } + default: /* invalid */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + polarity = 1; + break; + } } return polarity; } @@ -1018,69 +1018,67 @@ static int MPBIOS_trigger(int idx) /* * Determine IRQ trigger mode (edge or level sensitive): */ - switch ((mp_irqs[idx].mpc_irqflag>>2) & 3) + switch ((mp_irqs[idx].mpc_irqflag>>2) & 3) { + case 0: /* conforms, ie. bus-type dependent */ { - case 0: /* conforms, ie. bus-type dependent */ - { - trigger = test_bit(bus, mp_bus_not_pci)? - default_ISA_trigger(idx): - default_PCI_trigger(idx); + trigger = test_bit(bus, mp_bus_not_pci)? + default_ISA_trigger(idx): + default_PCI_trigger(idx); #if defined(CONFIG_EISA) || defined(CONFIG_MCA) - switch (mp_bus_id_to_type[bus]) - { - case MP_BUS_ISA: /* ISA pin */ - { - /* set before the switch */ - break; - } - case MP_BUS_EISA: /* EISA pin */ - { - trigger = default_EISA_trigger(idx); - break; - } - case MP_BUS_PCI: /* PCI pin */ - { - /* set before the switch */ - break; - } - case MP_BUS_MCA: /* MCA pin */ - { - trigger = default_MCA_trigger(idx); - break; - } - default: - { - printk(KERN_WARNING "broken BIOS!!\n"); - trigger = 1; - break; - } - } -#endif + switch (mp_bus_id_to_type[bus]) { + case MP_BUS_ISA: /* ISA pin */ + { + /* set before the switch */ break; } - case 1: /* edge */ + case MP_BUS_EISA: /* EISA pin */ { - trigger = 0; + trigger = default_EISA_trigger(idx); break; } - case 2: /* reserved */ + case MP_BUS_PCI: /* PCI pin */ { - printk(KERN_WARNING "broken BIOS!!\n"); - trigger = 1; + /* set before the switch */ break; } - case 3: /* level */ + case MP_BUS_MCA: /* MCA pin */ { - trigger = 1; + trigger = default_MCA_trigger(idx); break; } - default: /* invalid */ + default: { printk(KERN_WARNING "broken BIOS!!\n"); - trigger = 0; + trigger = 1; break; } } +#endif + break; + } + case 1: /* edge */ + { + trigger = 0; + break; + } + case 2: /* reserved */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + trigger = 1; + break; + } + case 3: /* level */ + { + trigger = 1; + break; + } + default: /* invalid */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + trigger = 0; + break; + } + } return trigger; } @@ -1148,8 +1146,8 @@ static inline int IO_APIC_irq_trigger(int irq) for (apic = 0; apic < nr_ioapics; apic++) { for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { - idx = find_irq_entry(apic,pin,mp_INT); - if ((idx != -1) && (irq == pin_2_irq(idx,apic,pin))) + idx = find_irq_entry(apic, pin, mp_INT); + if ((idx != -1) && (irq == pin_2_irq(idx, apic, pin))) return irq_trigger(idx); } } @@ -1164,7 +1162,7 @@ static u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = { FIRST_DEVICE_VECTOR , 0 } static int __assign_irq_vector(int irq) { - static int current_vector = FIRST_DEVICE_VECTOR, current_offset = 0; + static int current_vector = FIRST_DEVICE_VECTOR, current_offset; int vector, offset; BUG_ON((unsigned)irq >= NR_IRQ_VECTORS); @@ -1237,15 +1235,15 @@ static void __init setup_IO_APIC_irqs(void) /* * add it to the IO-APIC irq-routing table: */ - memset(&entry,0,sizeof(entry)); + memset(&entry, 0, sizeof(entry)); entry.delivery_mode = INT_DELIVERY_MODE; entry.dest_mode = INT_DEST_MODE; entry.mask = 0; /* enable IRQ */ - entry.dest.logical.logical_dest = + entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); - idx = find_irq_entry(apic,pin,mp_INT); + idx = find_irq_entry(apic, pin, mp_INT); if (idx == -1) { if (first_notcon) { apic_printk(APIC_VERBOSE, KERN_DEBUG @@ -1289,7 +1287,7 @@ static void __init setup_IO_APIC_irqs(void) vector = assign_irq_vector(irq); entry.vector = vector; ioapic_register_intr(irq, vector, IOAPIC_AUTO); - + if (!apic && (irq < 16)) disable_8259A_irq(irq); } @@ -1302,25 +1300,21 @@ static void __init setup_IO_APIC_irqs(void) } /* - * Set up the 8259A-master output pin: + * Set up the timer pin, possibly with the 8259A-master behind. */ -static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector) +static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin, + int vector) { struct IO_APIC_route_entry entry; - memset(&entry,0,sizeof(entry)); - - disable_8259A_irq(0); - - /* mask LVT0 */ - apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); + memset(&entry, 0, sizeof(entry)); /* * We use logical delivery to get the timer IRQ * to the first CPU. */ entry.dest_mode = INT_DEST_MODE; - entry.mask = 0; /* unmask IRQ now */ + entry.mask = 1; /* mask IRQ now */ entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); entry.delivery_mode = INT_DELIVERY_MODE; entry.polarity = 0; @@ -1329,17 +1323,14 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in /* * The timer IRQ doesn't have to know that behind the - * scene we have a 8259A-master in AEOI mode ... + * scene we may have a 8259A-master in AEOI mode ... */ - irq_desc[0].chip = &ioapic_chip; - set_irq_handler(0, handle_edge_irq); + ioapic_register_intr(0, vector, IOAPIC_EDGE); /* * Add it to the IO-APIC irq-routing table: */ ioapic_write_entry(apic, pin, entry); - - enable_8259A_irq(0); } void __init print_IO_APIC(void) @@ -1354,7 +1345,7 @@ void __init print_IO_APIC(void) if (apic_verbosity == APIC_QUIET) return; - printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); + printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); for (i = 0; i < nr_ioapics; i++) printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n", mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]); @@ -1459,7 +1450,7 @@ void __init print_IO_APIC(void) #if 0 -static void print_APIC_bitfield (int base) +static void print_APIC_bitfield(int base) { unsigned int v; int i, j; @@ -1480,7 +1471,7 @@ static void print_APIC_bitfield (int base) } } -void /*__init*/ print_local_APIC(void * dummy) +void /*__init*/ print_local_APIC(void *dummy) { unsigned int v, ver, maxlvt; @@ -1489,6 +1480,7 @@ void /*__init*/ print_local_APIC(void * dummy) printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n", smp_processor_id(), hard_smp_processor_id()); + v = apic_read(APIC_ID); printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, GET_APIC_ID(read_apic_id())); v = apic_read(APIC_LVR); @@ -1563,7 +1555,7 @@ void /*__init*/ print_local_APIC(void * dummy) printk("\n"); } -void print_all_local_APICs (void) +void print_all_local_APICs(void) { on_each_cpu(print_local_APIC, NULL, 1, 1); } @@ -1586,11 +1578,11 @@ void /*__init*/ print_PIC(void) v = inb(0xa0) << 8 | inb(0x20); printk(KERN_DEBUG "... PIC IRR: %04x\n", v); - outb(0x0b,0xa0); - outb(0x0b,0x20); + outb(0x0b, 0xa0); + outb(0x0b, 0x20); v = inb(0xa0) << 8 | inb(0x20); - outb(0x0a,0xa0); - outb(0x0a,0x20); + outb(0x0a, 0xa0); + outb(0x0a, 0x20); spin_unlock_irqrestore(&i8259A_lock, flags); @@ -1626,7 +1618,7 @@ static void __init enable_IO_APIC(void) spin_unlock_irqrestore(&ioapic_lock, flags); nr_ioapic_registers[apic] = reg_01.bits.entries+1; } - for(apic = 0; apic < nr_ioapics; apic++) { + for (apic = 0; apic < nr_ioapics; apic++) { int pin; /* See if any of the pins is in ExtINT mode */ for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { @@ -1748,7 +1740,7 @@ static void __init setup_ioapic_ids_from_mpc(void) spin_lock_irqsave(&ioapic_lock, flags); reg_00.raw = io_apic_read(apic, 0); spin_unlock_irqrestore(&ioapic_lock, flags); - + old_id = mp_ioapics[apic].mpc_apicid; if (mp_ioapics[apic].mpc_apicid >= get_physical_broadcast()) { @@ -1800,7 +1792,7 @@ static void __init setup_ioapic_ids_from_mpc(void) /* * Read the right value from the MPC table and * write it into the ID register. - */ + */ apic_printk(APIC_VERBOSE, KERN_INFO "...changing IO-APIC physical APIC ID to %d ...", mp_ioapics[apic].mpc_apicid); @@ -2020,7 +2012,7 @@ static void ack_apic(unsigned int irq) ack_APIC_irq(); } -static void mask_lapic_irq (unsigned int irq) +static void mask_lapic_irq(unsigned int irq) { unsigned long v; @@ -2028,7 +2020,7 @@ static void mask_lapic_irq (unsigned int irq) apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED); } -static void unmask_lapic_irq (unsigned int irq) +static void unmask_lapic_irq(unsigned int irq) { unsigned long v; @@ -2037,7 +2029,7 @@ static void unmask_lapic_irq (unsigned int irq) } static struct irq_chip lapic_chip __read_mostly = { - .name = "local-APIC-edge", + .name = "local-APIC", .mask = mask_lapic_irq, .unmask = unmask_lapic_irq, .eoi = ack_apic, @@ -2046,14 +2038,14 @@ static struct irq_chip lapic_chip __read_mostly = { static void __init setup_nmi(void) { /* - * Dirty trick to enable the NMI watchdog ... + * Dirty trick to enable the NMI watchdog ... * We put the 8259A master into AEOI mode and * unmask on all local APICs LVT0 as NMI. * * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire') * is from Maciej W. Rozycki - so we do not have to EOI from * the NMI handler or the timer interrupt. - */ + */ apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ..."); enable_NMI_through_LVT0(); @@ -2129,6 +2121,7 @@ static inline void __init unlock_ExtINT_logic(void) static inline void __init check_timer(void) { int apic1, pin1, apic2, pin2; + int no_pin1 = 0; int vector; unsigned int ver; unsigned long flags; @@ -2146,21 +2139,17 @@ static inline void __init check_timer(void) set_intr_gate(vector, interrupt[0]); /* - * Subtle, code in do_timer_interrupt() expects an AEOI - * mode for the 8259A whenever interrupts are routed - * through I/O APICs. Also IRQ0 has to be enabled in - * the 8259A which implies the virtual wire has to be - * disabled in the local APIC. Finally timer interrupts - * need to be acknowledged manually in the 8259A for - * timer_interrupt() and for the i82489DX when using - * the NMI watchdog. + * As IRQ0 is to be enabled in the 8259A, the virtual + * wire has to be disabled in the local APIC. Also + * timer interrupts need to be acknowledged manually in + * the 8259A for the i82489DX when using the NMI + * watchdog as that APIC treats NMIs as level-triggered. + * The AEOI mode will finish them in the 8259A + * automatically. */ apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); init_8259A(1); - timer_ack = !cpu_has_tsc; - timer_ack |= (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver)); - if (timer_over_8254 > 0) - enable_8259A_irq(0); + timer_ack = (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver)); pin1 = find_isa_irq_pin(0, mp_INT); apic1 = find_isa_irq_apic(0, mp_INT); @@ -2170,14 +2159,33 @@ static inline void __init check_timer(void) printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n", vector, apic1, pin1, apic2, pin2); + /* + * Some BIOS writers are clueless and report the ExtINTA + * I/O APIC input from the cascaded 8259A as the timer + * interrupt input. So just in case, if only one pin + * was found above, try it both directly and through the + * 8259A. + */ + if (pin1 == -1) { + pin1 = pin2; + apic1 = apic2; + no_pin1 = 1; + } else if (pin2 == -1) { + pin2 = pin1; + apic2 = apic1; + } + if (pin1 != -1) { /* * Ok, does IRQ0 through the IOAPIC work? */ + if (no_pin1) { + add_pin_to_irq(0, apic1, pin1); + setup_timer_IRQ0_pin(apic1, pin1, vector); + } unmask_IO_APIC_irq(0); if (timer_irq_works()) { if (nmi_watchdog == NMI_IO_APIC) { - disable_8259A_irq(0); setup_nmi(); enable_8259A_irq(0); } @@ -2186,43 +2194,46 @@ static inline void __init check_timer(void) goto out; } clear_IO_APIC_pin(apic1, pin1); - printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to " - "IO-APIC\n"); - } + if (!no_pin1) + printk(KERN_ERR "..MP-BIOS bug: " + "8254 timer not connected to IO-APIC\n"); - printk(KERN_INFO "...trying to set up timer (IRQ0) through the 8259A ... "); - if (pin2 != -1) { + printk(KERN_INFO "...trying to set up timer (IRQ0) " + "through the 8259A ... "); printk("\n..... (found pin %d) ...", pin2); /* * legacy devices should be connected to IO APIC #0 */ - setup_ExtINT_IRQ0_pin(apic2, pin2, vector); + replace_pin_at_irq(0, apic1, pin1, apic2, pin2); + setup_timer_IRQ0_pin(apic2, pin2, vector); + unmask_IO_APIC_irq(0); + enable_8259A_irq(0); if (timer_irq_works()) { printk("works.\n"); - if (pin1 != -1) - replace_pin_at_irq(0, apic1, pin1, apic2, pin2); - else - add_pin_to_irq(0, apic2, pin2); + timer_through_8259 = 1; if (nmi_watchdog == NMI_IO_APIC) { + disable_8259A_irq(0); setup_nmi(); + enable_8259A_irq(0); } goto out; } /* * Cleanup, just in case ... */ + disable_8259A_irq(0); clear_IO_APIC_pin(apic2, pin2); + printk(" failed.\n"); } - printk(" failed.\n"); if (nmi_watchdog == NMI_IO_APIC) { printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n"); - nmi_watchdog = 0; + nmi_watchdog = NMI_NONE; } + timer_ack = 0; printk(KERN_INFO "...trying to set up timer as Virtual Wire IRQ..."); - disable_8259A_irq(0); set_irq_chip_and_handler_name(0, &lapic_chip, handle_fasteoi_irq, "fasteoi"); apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */ @@ -2232,12 +2243,12 @@ static inline void __init check_timer(void) printk(" works.\n"); goto out; } + disable_8259A_irq(0); apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector); printk(" failed.\n"); printk(KERN_INFO "...trying to set up timer as ExtINT IRQ..."); - timer_ack = 0; init_8259A(0); make_8259A_irq(0); apic_write_around(APIC_LVT0, APIC_DM_EXTINT); @@ -2294,28 +2305,14 @@ void __init setup_IO_APIC(void) print_IO_APIC(); } -static int __init setup_disable_8254_timer(char *s) -{ - timer_over_8254 = -1; - return 1; -} -static int __init setup_enable_8254_timer(char *s) -{ - timer_over_8254 = 2; - return 1; -} - -__setup("disable_8254_timer", setup_disable_8254_timer); -__setup("enable_8254_timer", setup_enable_8254_timer); - /* * Called after all the initialization is done. If we didnt find any * APIC bugs then we can allow the modify fast path */ - + static int __init io_apic_bug_finalize(void) { - if(sis_apic_bug == -1) + if (sis_apic_bug == -1) sis_apic_bug = 0; return 0; } @@ -2326,17 +2323,17 @@ struct sysfs_ioapic_data { struct sys_device dev; struct IO_APIC_route_entry entry[0]; }; -static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS]; +static struct sysfs_ioapic_data *mp_ioapic_data[MAX_IO_APICS]; static int ioapic_suspend(struct sys_device *dev, pm_message_t state) { struct IO_APIC_route_entry *entry; struct sysfs_ioapic_data *data; int i; - + data = container_of(dev, struct sysfs_ioapic_data, dev); entry = data->entry; - for (i = 0; i < nr_ioapic_registers[dev->id]; i ++) + for (i = 0; i < nr_ioapic_registers[dev->id]; i++) entry[i] = ioapic_read_entry(dev->id, i); return 0; @@ -2349,7 +2346,7 @@ static int ioapic_resume(struct sys_device *dev) unsigned long flags; union IO_APIC_reg_00 reg_00; int i; - + data = container_of(dev, struct sysfs_ioapic_data, dev); entry = data->entry; @@ -2360,7 +2357,7 @@ static int ioapic_resume(struct sys_device *dev) io_apic_write(dev->id, 0, reg_00.raw); } spin_unlock_irqrestore(&ioapic_lock, flags); - for (i = 0; i < nr_ioapic_registers[dev->id]; i ++) + for (i = 0; i < nr_ioapic_registers[dev->id]; i++) ioapic_write_entry(dev->id, i, entry[i]); return 0; @@ -2374,24 +2371,23 @@ static struct sysdev_class ioapic_sysdev_class = { static int __init ioapic_init_sysfs(void) { - struct sys_device * dev; + struct sys_device *dev; int i, size, error = 0; error = sysdev_class_register(&ioapic_sysdev_class); if (error) return error; - for (i = 0; i < nr_ioapics; i++ ) { - size = sizeof(struct sys_device) + nr_ioapic_registers[i] + for (i = 0; i < nr_ioapics; i++) { + size = sizeof(struct sys_device) + nr_ioapic_registers[i] * sizeof(struct IO_APIC_route_entry); - mp_ioapic_data[i] = kmalloc(size, GFP_KERNEL); + mp_ioapic_data[i] = kzalloc(size, GFP_KERNEL); if (!mp_ioapic_data[i]) { printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i); continue; } - memset(mp_ioapic_data[i], 0, size); dev = &mp_ioapic_data[i]->dev; - dev->id = i; + dev->id = i; dev->cls = &ioapic_sysdev_class; error = sysdev_register(dev); if (error) { @@ -2466,7 +2462,7 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms msg->address_lo = MSI_ADDR_BASE_LO | ((INT_DEST_MODE == 0) ? - MSI_ADDR_DEST_MODE_PHYSICAL: +MSI_ADDR_DEST_MODE_PHYSICAL: MSI_ADDR_DEST_MODE_LOGICAL) | ((INT_DELIVERY_MODE != dest_LowestPrio) ? MSI_ADDR_REDIRECTION_CPU: @@ -2477,7 +2473,7 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms MSI_DATA_TRIGGER_EDGE | MSI_DATA_LEVEL_ASSERT | ((INT_DELIVERY_MODE != dest_LowestPrio) ? - MSI_DATA_DELIVERY_FIXED: +MSI_DATA_DELIVERY_FIXED: MSI_DATA_DELIVERY_LOWPRI) | MSI_DATA_VECTOR(vector); } @@ -2648,12 +2644,12 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev) #endif /* CONFIG_HT_IRQ */ /* -------------------------------------------------------------------------- - ACPI-based IOAPIC Configuration + ACPI-based IOAPIC Configuration -------------------------------------------------------------------------- */ #ifdef CONFIG_ACPI -int __init io_apic_get_unique_id (int ioapic, int apic_id) +int __init io_apic_get_unique_id(int ioapic, int apic_id) { union IO_APIC_reg_00 reg_00; static physid_mask_t apic_id_map = PHYSID_MASK_NONE; @@ -2662,10 +2658,10 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id) int i = 0; /* - * The P4 platform supports up to 256 APIC IDs on two separate APIC - * buses (one for LAPICs, one for IOAPICs), where predecessors only + * The P4 platform supports up to 256 APIC IDs on two separate APIC + * buses (one for LAPICs, one for IOAPICs), where predecessors only * supports up to 16 on one shared APIC bus. - * + * * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full * advantage of new APIC bus architecture. */ @@ -2684,7 +2680,7 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id) } /* - * Every APIC in a system must have a unique ID or we get lots of nice + * Every APIC in a system must have a unique ID or we get lots of nice * 'stuck on smp_invalidate_needed IPI wait' messages. */ if (check_apicid_used(apic_id_map, apic_id)) { @@ -2701,7 +2697,7 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id) "trying %d\n", ioapic, apic_id, i); apic_id = i; - } + } tmp = apicid_to_cpu_present(apic_id); physids_or(apic_id_map, apic_id_map, tmp); @@ -2728,7 +2724,7 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id) } -int __init io_apic_get_version (int ioapic) +int __init io_apic_get_version(int ioapic) { union IO_APIC_reg_01 reg_01; unsigned long flags; @@ -2741,7 +2737,7 @@ int __init io_apic_get_version (int ioapic) } -int __init io_apic_get_redir_entries (int ioapic) +int __init io_apic_get_redir_entries(int ioapic) { union IO_APIC_reg_01 reg_01; unsigned long flags; @@ -2754,7 +2750,7 @@ int __init io_apic_get_redir_entries (int ioapic) } -int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int active_high_low) +int io_apic_set_pci_routing(int ioapic, int pin, int irq, int edge_level, int active_high_low) { struct IO_APIC_route_entry entry; @@ -2770,7 +2766,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a * corresponding device driver registers for this IRQ. */ - memset(&entry,0,sizeof(entry)); + memset(&entry, 0, sizeof(entry)); entry.delivery_mode = INT_DELIVERY_MODE; entry.dest_mode = INT_DEST_MODE; diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index ef1a8dfcc529..e5ef60303562 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -61,7 +61,7 @@ struct irq_cfg { }; /* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */ -struct irq_cfg irq_cfg[NR_IRQS] __read_mostly = { +static struct irq_cfg irq_cfg[NR_IRQS] __read_mostly = { [0] = { .domain = CPU_MASK_ALL, .vector = IRQ0_VECTOR, }, [1] = { .domain = CPU_MASK_ALL, .vector = IRQ1_VECTOR, }, [2] = { .domain = CPU_MASK_ALL, .vector = IRQ2_VECTOR, }, @@ -90,7 +90,7 @@ static int no_timer_check; static int disable_timer_pin_1 __initdata; -int timer_over_8254 __initdata = 1; +int timer_through_8259 __initdata; /* Where if anywhere is the i8259 connect in external int mode */ static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; @@ -183,7 +183,7 @@ static bool io_apic_level_ack_pending(unsigned int irq) break; reg = io_apic_read(entry->apic, 0x10 + pin*2); /* Is the remote IRR bit set? */ - if ((reg >> 14) & 1) { + if (reg & IO_APIC_REDIR_REMOTE_IRR) { spin_unlock_irqrestore(&ioapic_lock, flags); return true; } @@ -298,7 +298,7 @@ static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, u8 vector) break; io_apic_write(apic, 0x11 + pin*2, dest); reg = io_apic_read(apic, 0x10 + pin*2); - reg &= ~0x000000ff; + reg &= ~IO_APIC_REDIR_VECTOR_MASK; reg |= vector; io_apic_modify(apic, reg); if (!entry->next) @@ -360,16 +360,37 @@ static void add_pin_to_irq(unsigned int irq, int apic, int pin) entry->pin = pin; } +/* + * Reroute an IRQ to a different pin. + */ +static void __init replace_pin_at_irq(unsigned int irq, + int oldapic, int oldpin, + int newapic, int newpin) +{ + struct irq_pin_list *entry = irq_2_pin + irq; + + while (1) { + if (entry->apic == oldapic && entry->pin == oldpin) { + entry->apic = newapic; + entry->pin = newpin; + } + if (!entry->next) + break; + entry = irq_2_pin + entry->next; + } +} + #define DO_ACTION(name,R,ACTION, FINAL) \ \ static void name##_IO_APIC_irq (unsigned int irq) \ __DO_ACTION(R, ACTION, FINAL) -DO_ACTION( __mask, 0, |= 0x00010000, io_apic_sync(entry->apic) ) - /* mask = 1 */ -DO_ACTION( __unmask, 0, &= 0xfffeffff, ) - /* mask = 0 */ +/* mask = 1 */ +DO_ACTION(__mask, 0, |= IO_APIC_REDIR_MASKED, io_apic_sync(entry->apic)) + +/* mask = 0 */ +DO_ACTION(__unmask, 0, &= ~IO_APIC_REDIR_MASKED, ) static void mask_IO_APIC_irq (unsigned int irq) { @@ -430,20 +451,6 @@ static int __init disable_timer_pin_setup(char *arg) } __setup("disable_timer_pin_1", disable_timer_pin_setup); -static int __init setup_disable_8254_timer(char *s) -{ - timer_over_8254 = -1; - return 1; -} -static int __init setup_enable_8254_timer(char *s) -{ - timer_over_8254 = 2; - return 1; -} - -__setup("disable_8254_timer", setup_disable_8254_timer); -__setup("enable_8254_timer", setup_enable_8254_timer); - /* * Find the IRQ entry number of a certain pin. @@ -911,26 +918,21 @@ static void __init setup_IO_APIC_irqs(void) } /* - * Set up the 8259A-master output pin as broadcast to all - * CPUs. + * Set up the timer pin, possibly with the 8259A-master behind. */ -static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector) +static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin, + int vector) { struct IO_APIC_route_entry entry; memset(&entry, 0, sizeof(entry)); - disable_8259A_irq(0); - - /* mask LVT0 */ - apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); - /* * We use logical delivery to get the timer IRQ * to the first CPU. */ entry.dest_mode = INT_DEST_MODE; - entry.mask = 0; /* unmask IRQ now */ + entry.mask = 1; /* mask IRQ now */ entry.dest = cpu_mask_to_apicid(TARGET_CPUS); entry.delivery_mode = INT_DELIVERY_MODE; entry.polarity = 0; @@ -939,7 +941,7 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in /* * The timer IRQ doesn't have to know that behind the - * scene we have a 8259A-master in AEOI mode ... + * scene we may have a 8259A-master in AEOI mode ... */ set_irq_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq, "edge"); @@ -947,8 +949,6 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in * Add it to the IO-APIC irq-routing table: */ ioapic_write_entry(apic, pin, entry); - - enable_8259A_irq(0); } void __apicdebuginit print_IO_APIC(void) @@ -1077,6 +1077,7 @@ void __apicdebuginit print_local_APIC(void * dummy) printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n", smp_processor_id(), hard_smp_processor_id()); + v = apic_read(APIC_ID); printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, GET_APIC_ID(read_apic_id())); v = apic_read(APIC_LVR); printk(KERN_INFO "... APIC VERSION: %08x\n", v); @@ -1659,6 +1660,7 @@ static inline void __init check_timer(void) struct irq_cfg *cfg = irq_cfg + 0; int apic1, pin1, apic2, pin2; unsigned long flags; + int no_pin1 = 0; local_irq_save(flags); @@ -1669,16 +1671,11 @@ static inline void __init check_timer(void) assign_irq_vector(0, TARGET_CPUS); /* - * Subtle, code in do_timer_interrupt() expects an AEOI - * mode for the 8259A whenever interrupts are routed - * through I/O APICs. Also IRQ0 has to be enabled in - * the 8259A which implies the virtual wire has to be - * disabled in the local APIC. + * As IRQ0 is to be enabled in the 8259A, the virtual + * wire has to be disabled in the local APIC. */ apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); init_8259A(1); - if (timer_over_8254 > 0) - enable_8259A_irq(0); pin1 = find_isa_irq_pin(0, mp_INT); apic1 = find_isa_irq_apic(0, mp_INT); @@ -1688,15 +1685,39 @@ static inline void __init check_timer(void) apic_printk(APIC_VERBOSE,KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n", cfg->vector, apic1, pin1, apic2, pin2); + /* + * Some BIOS writers are clueless and report the ExtINTA + * I/O APIC input from the cascaded 8259A as the timer + * interrupt input. So just in case, if only one pin + * was found above, try it both directly and through the + * 8259A. + */ + if (pin1 == -1) { + pin1 = pin2; + apic1 = apic2; + no_pin1 = 1; + } else if (pin2 == -1) { + pin2 = pin1; + apic2 = apic1; + } + + replace_pin_at_irq(0, 0, 0, apic1, pin1); + apic1 = 0; + pin1 = 0; + setup_timer_IRQ0_pin(apic1, pin1, cfg->vector); + if (pin1 != -1) { /* * Ok, does IRQ0 through the IOAPIC work? */ + if (no_pin1) { + add_pin_to_irq(0, apic1, pin1); + setup_timer_IRQ0_pin(apic1, pin1, cfg->vector); + } unmask_IO_APIC_irq(0); if (!no_timer_check && timer_irq_works()) { nmi_watchdog_default(); if (nmi_watchdog == NMI_IO_APIC) { - disable_8259A_irq(0); setup_nmi(); enable_8259A_irq(0); } @@ -1705,42 +1726,48 @@ static inline void __init check_timer(void) goto out; } clear_IO_APIC_pin(apic1, pin1); - apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: 8254 timer not " - "connected to IO-APIC\n"); - } + if (!no_pin1) + apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: " + "8254 timer not connected to IO-APIC\n"); - apic_printk(APIC_VERBOSE,KERN_INFO "...trying to set up timer (IRQ0) " - "through the 8259A ... "); - if (pin2 != -1) { + apic_printk(APIC_VERBOSE,KERN_INFO + "...trying to set up timer (IRQ0) " + "through the 8259A ... "); apic_printk(APIC_VERBOSE,"\n..... (found apic %d pin %d) ...", apic2, pin2); /* * legacy devices should be connected to IO APIC #0 */ - setup_ExtINT_IRQ0_pin(apic2, pin2, cfg->vector); + replace_pin_at_irq(0, apic1, pin1, apic2, pin2); + setup_timer_IRQ0_pin(apic2, pin2, cfg->vector); + unmask_IO_APIC_irq(0); + enable_8259A_irq(0); if (timer_irq_works()) { apic_printk(APIC_VERBOSE," works.\n"); + timer_through_8259 = 1; nmi_watchdog_default(); if (nmi_watchdog == NMI_IO_APIC) { + disable_8259A_irq(0); setup_nmi(); + enable_8259A_irq(0); } goto out; } /* * Cleanup, just in case ... */ + disable_8259A_irq(0); clear_IO_APIC_pin(apic2, pin2); + apic_printk(APIC_VERBOSE," failed.\n"); } - apic_printk(APIC_VERBOSE," failed.\n"); if (nmi_watchdog == NMI_IO_APIC) { printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n"); - nmi_watchdog = 0; + nmi_watchdog = NMI_NONE; } apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as Virtual Wire IRQ..."); - disable_8259A_irq(0); irq_desc[0].chip = &lapic_irq_type; apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector); /* Fixed mode */ enable_8259A_irq(0); @@ -1749,6 +1776,7 @@ static inline void __init check_timer(void) apic_printk(APIC_VERBOSE," works.\n"); goto out; } + disable_8259A_irq(0); apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector); apic_printk(APIC_VERBOSE," failed.\n"); diff --git a/arch/x86/kernel/ipi.c b/arch/x86/kernel/ipi.c index c0df7b89ca23..9d98cda39ad9 100644 --- a/arch/x86/kernel/ipi.c +++ b/arch/x86/kernel/ipi.c @@ -8,7 +8,6 @@ #include <linux/kernel_stat.h> #include <linux/mc146818rtc.h> #include <linux/cache.h> -#include <linux/interrupt.h> #include <linux/cpu.h> #include <linux/module.h> diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c index 147352df28b9..468acd04aa2e 100644 --- a/arch/x86/kernel/irq_32.c +++ b/arch/x86/kernel/irq_32.c @@ -313,16 +313,20 @@ skip: per_cpu(irq_stat,j).irq_tlb_count); seq_printf(p, " TLB shootdowns\n"); #endif +#ifdef CONFIG_X86_MCE seq_printf(p, "TRM: "); for_each_online_cpu(j) seq_printf(p, "%10u ", per_cpu(irq_stat,j).irq_thermal_count); seq_printf(p, " Thermal event interrupts\n"); +#endif +#ifdef CONFIG_X86_LOCAL_APIC seq_printf(p, "SPU: "); for_each_online_cpu(j) seq_printf(p, "%10u ", per_cpu(irq_stat,j).irq_spurious_count); seq_printf(p, " Spurious interrupts\n"); +#endif seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count)); #if defined(CONFIG_X86_IO_APIC) seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count)); @@ -331,6 +335,40 @@ skip: return 0; } +/* + * /proc/stat helpers + */ +u64 arch_irq_stat_cpu(unsigned int cpu) +{ + u64 sum = nmi_count(cpu); + +#ifdef CONFIG_X86_LOCAL_APIC + sum += per_cpu(irq_stat, cpu).apic_timer_irqs; +#endif +#ifdef CONFIG_SMP + sum += per_cpu(irq_stat, cpu).irq_resched_count; + sum += per_cpu(irq_stat, cpu).irq_call_count; + sum += per_cpu(irq_stat, cpu).irq_tlb_count; +#endif +#ifdef CONFIG_X86_MCE + sum += per_cpu(irq_stat, cpu).irq_thermal_count; +#endif +#ifdef CONFIG_X86_LOCAL_APIC + sum += per_cpu(irq_stat, cpu).irq_spurious_count; +#endif + return sum; +} + +u64 arch_irq_stat(void) +{ + u64 sum = atomic_read(&irq_err_count); + +#ifdef CONFIG_X86_IO_APIC + sum += atomic_read(&irq_mis_count); +#endif + return sum; +} + #ifdef CONFIG_HOTPLUG_CPU #include <mach_apic.h> diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c index 3aac15466a91..1f78b238d8d2 100644 --- a/arch/x86/kernel/irq_64.c +++ b/arch/x86/kernel/irq_64.c @@ -135,6 +135,7 @@ skip: seq_printf(p, "%10u ", cpu_pda(j)->irq_tlb_count); seq_printf(p, " TLB shootdowns\n"); #endif +#ifdef CONFIG_X86_MCE seq_printf(p, "TRM: "); for_each_online_cpu(j) seq_printf(p, "%10u ", cpu_pda(j)->irq_thermal_count); @@ -143,6 +144,7 @@ skip: for_each_online_cpu(j) seq_printf(p, "%10u ", cpu_pda(j)->irq_threshold_count); seq_printf(p, " Threshold APIC interrupts\n"); +#endif seq_printf(p, "SPU: "); for_each_online_cpu(j) seq_printf(p, "%10u ", cpu_pda(j)->irq_spurious_count); @@ -153,6 +155,32 @@ skip: } /* + * /proc/stat helpers + */ +u64 arch_irq_stat_cpu(unsigned int cpu) +{ + u64 sum = cpu_pda(cpu)->__nmi_count; + + sum += cpu_pda(cpu)->apic_timer_irqs; +#ifdef CONFIG_SMP + sum += cpu_pda(cpu)->irq_resched_count; + sum += cpu_pda(cpu)->irq_call_count; + sum += cpu_pda(cpu)->irq_tlb_count; +#endif +#ifdef CONFIG_X86_MCE + sum += cpu_pda(cpu)->irq_thermal_count; + sum += cpu_pda(cpu)->irq_threshold_count; +#endif + sum += cpu_pda(cpu)->irq_spurious_count; + return sum; +} + +u64 arch_irq_stat(void) +{ + return atomic_read(&irq_err_count); +} + +/* * do_IRQ handles all normal device IRQ's (the special * SMP cross-CPU interrupts have their own specific * handlers). diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c new file mode 100644 index 000000000000..d66914287ee1 --- /dev/null +++ b/arch/x86/kernel/irqinit_32.c @@ -0,0 +1,114 @@ +#include <linux/errno.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/random.h> +#include <linux/init.h> +#include <linux/kernel_stat.h> +#include <linux/sysdev.h> +#include <linux/bitops.h> + +#include <asm/atomic.h> +#include <asm/system.h> +#include <asm/io.h> +#include <asm/timer.h> +#include <asm/pgtable.h> +#include <asm/delay.h> +#include <asm/desc.h> +#include <asm/apic.h> +#include <asm/arch_hooks.h> +#include <asm/i8259.h> + + + +/* + * Note that on a 486, we don't want to do a SIGFPE on an irq13 + * as the irq is unreliable, and exception 16 works correctly + * (ie as explained in the intel literature). On a 386, you + * can't use exception 16 due to bad IBM design, so we have to + * rely on the less exact irq13. + * + * Careful.. Not only is IRQ13 unreliable, but it is also + * leads to races. IBM designers who came up with it should + * be shot. + */ + + +static irqreturn_t math_error_irq(int cpl, void *dev_id) +{ + extern void math_error(void __user *); + outb(0,0xF0); + if (ignore_fpu_irq || !boot_cpu_data.hard_math) + return IRQ_NONE; + math_error((void __user *)get_irq_regs()->ip); + return IRQ_HANDLED; +} + +/* + * New motherboards sometimes make IRQ 13 be a PCI interrupt, + * so allow interrupt sharing. + */ +static struct irqaction fpu_irq = { + .handler = math_error_irq, + .mask = CPU_MASK_NONE, + .name = "fpu", +}; + +void __init init_ISA_irqs (void) +{ + int i; + +#ifdef CONFIG_X86_LOCAL_APIC + init_bsp_APIC(); +#endif + init_8259A(0); + + /* + * 16 old-style INTA-cycle interrupts: + */ + for (i = 0; i < 16; i++) { + set_irq_chip_and_handler_name(i, &i8259A_chip, + handle_level_irq, "XT"); + } +} + +/* Overridden in paravirt.c */ +void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); + +void __init native_init_IRQ(void) +{ + int i; + + /* all the set up before the call gates are initialised */ + pre_intr_init_hook(); + + /* + * Cover the whole vector space, no vector can escape + * us. (some of these will be overridden and become + * 'special' SMP interrupts) + */ + for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { + int vector = FIRST_EXTERNAL_VECTOR + i; + if (i >= NR_IRQS) + break; + /* SYSCALL_VECTOR was reserved in trap_init. */ + if (!test_bit(vector, used_vectors)) + set_intr_gate(vector, interrupt[i]); + } + + /* setup after call gates are initialised (usually add in + * the architecture specific gates) + */ + intr_init_hook(); + + /* + * External FPU? Set up irq13 if so, for + * original braindamaged IBM FERR coupling. + */ + if (boot_cpu_data.hard_math && !cpu_has_fpu) + setup_irq(FPU_IRQ, &fpu_irq); + + irq_ctx_init(smp_processor_id()); +} diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c new file mode 100644 index 000000000000..64bc0f14285f --- /dev/null +++ b/arch/x86/kernel/irqinit_64.c @@ -0,0 +1,203 @@ +#include <linux/linkage.h> +#include <linux/errno.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/timex.h> +#include <linux/slab.h> +#include <linux/random.h> +#include <linux/init.h> +#include <linux/kernel_stat.h> +#include <linux/sysdev.h> +#include <linux/bitops.h> + +#include <asm/acpi.h> +#include <asm/atomic.h> +#include <asm/system.h> +#include <asm/io.h> +#include <asm/hw_irq.h> +#include <asm/pgtable.h> +#include <asm/delay.h> +#include <asm/desc.h> +#include <asm/apic.h> +#include <asm/i8259.h> + +/* + * Common place to define all x86 IRQ vectors + * + * This builds up the IRQ handler stubs using some ugly macros in irq.h + * + * These macros create the low-level assembly IRQ routines that save + * register context and call do_IRQ(). do_IRQ() then does all the + * operations that are needed to keep the AT (or SMP IOAPIC) + * interrupt-controller happy. + */ + +#define BI(x,y) \ + BUILD_IRQ(x##y) + +#define BUILD_16_IRQS(x) \ + BI(x,0) BI(x,1) BI(x,2) BI(x,3) \ + BI(x,4) BI(x,5) BI(x,6) BI(x,7) \ + BI(x,8) BI(x,9) BI(x,a) BI(x,b) \ + BI(x,c) BI(x,d) BI(x,e) BI(x,f) + +/* + * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: + * (these are usually mapped to vectors 0x30-0x3f) + */ + +/* + * The IO-APIC gives us many more interrupt sources. Most of these + * are unused but an SMP system is supposed to have enough memory ... + * sometimes (mostly wrt. hw bugs) we get corrupted vectors all + * across the spectrum, so we really want to be prepared to get all + * of these. Plus, more powerful systems might have more than 64 + * IO-APIC registers. + * + * (these are usually mapped into the 0x30-0xff vector range) + */ + BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3) +BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7) +BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb) +BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf) + +#undef BUILD_16_IRQS +#undef BI + + +#define IRQ(x,y) \ + IRQ##x##y##_interrupt + +#define IRQLIST_16(x) \ + IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \ + IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \ + IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \ + IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f) + +/* for the irq vectors */ +static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = { + IRQLIST_16(0x2), IRQLIST_16(0x3), + IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7), + IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb), + IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf) +}; + +#undef IRQ +#undef IRQLIST_16 + + + + +/* + * IRQ2 is cascade interrupt to second interrupt controller + */ + +static struct irqaction irq2 = { + .handler = no_action, + .mask = CPU_MASK_NONE, + .name = "cascade", +}; +DEFINE_PER_CPU(vector_irq_t, vector_irq) = { + [0 ... IRQ0_VECTOR - 1] = -1, + [IRQ0_VECTOR] = 0, + [IRQ1_VECTOR] = 1, + [IRQ2_VECTOR] = 2, + [IRQ3_VECTOR] = 3, + [IRQ4_VECTOR] = 4, + [IRQ5_VECTOR] = 5, + [IRQ6_VECTOR] = 6, + [IRQ7_VECTOR] = 7, + [IRQ8_VECTOR] = 8, + [IRQ9_VECTOR] = 9, + [IRQ10_VECTOR] = 10, + [IRQ11_VECTOR] = 11, + [IRQ12_VECTOR] = 12, + [IRQ13_VECTOR] = 13, + [IRQ14_VECTOR] = 14, + [IRQ15_VECTOR] = 15, + [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 +}; + +static void __init init_ISA_irqs (void) +{ + int i; + + init_bsp_APIC(); + init_8259A(0); + + for (i = 0; i < NR_IRQS; i++) { + irq_desc[i].status = IRQ_DISABLED; + irq_desc[i].action = NULL; + irq_desc[i].depth = 1; + + if (i < 16) { + /* + * 16 old-style INTA-cycle interrupts: + */ + set_irq_chip_and_handler_name(i, &i8259A_chip, + handle_level_irq, "XT"); + } else { + /* + * 'high' PCI IRQs filled in on demand + */ + irq_desc[i].chip = &no_irq_chip; + } + } +} + +void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); + +void __init native_init_IRQ(void) +{ + int i; + + init_ISA_irqs(); + /* + * Cover the whole vector space, no vector can escape + * us. (some of these will be overridden and become + * 'special' SMP interrupts) + */ + for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { + int vector = FIRST_EXTERNAL_VECTOR + i; + if (vector != IA32_SYSCALL_VECTOR) + set_intr_gate(vector, interrupt[i]); + } + +#ifdef CONFIG_SMP + /* + * The reschedule interrupt is a CPU-to-CPU reschedule-helper + * IPI, driven by wakeup. + */ + set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); + + /* IPIs for invalidation */ + set_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); + + /* IPI for generic function call */ + set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); + + /* Low priority IPI to cleanup after moving an irq */ + set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); +#endif + set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); + set_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); + + /* self generated IPI for local APIC timer */ + set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); + + /* IPI vectors for APIC spurious and error interrupts */ + set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); + set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); + + if (!acpi_ioapic) + setup_irq(2, &irq2); +} diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c index 4bc1be5d5472..87edf1ceb1df 100644 --- a/arch/x86/kernel/kvmclock.c +++ b/arch/x86/kernel/kvmclock.c @@ -18,6 +18,7 @@ #include <linux/clocksource.h> #include <linux/kvm_para.h> +#include <asm/pvclock.h> #include <asm/arch_hooks.h> #include <asm/msr.h> #include <asm/apic.h> @@ -36,83 +37,47 @@ static int parse_no_kvmclock(char *arg) early_param("no-kvmclock", parse_no_kvmclock); /* The hypervisor will put information about time periodically here */ -static DEFINE_PER_CPU_SHARED_ALIGNED(struct kvm_vcpu_time_info, hv_clock); -#define get_clock(cpu, field) per_cpu(hv_clock, cpu).field +static DEFINE_PER_CPU_SHARED_ALIGNED(struct pvclock_vcpu_time_info, hv_clock); +static struct pvclock_wall_clock wall_clock; -static inline u64 kvm_get_delta(u64 last_tsc) -{ - int cpu = smp_processor_id(); - u64 delta = native_read_tsc() - last_tsc; - return (delta * get_clock(cpu, tsc_to_system_mul)) >> KVM_SCALE; -} - -static struct kvm_wall_clock wall_clock; -static cycle_t kvm_clock_read(void); /* * The wallclock is the time of day when we booted. Since then, some time may * have elapsed since the hypervisor wrote the data. So we try to account for * that with system time */ -unsigned long kvm_get_wallclock(void) +static unsigned long kvm_get_wallclock(void) { - u32 wc_sec, wc_nsec; - u64 delta; + struct pvclock_vcpu_time_info *vcpu_time; struct timespec ts; - int version, nsec; int low, high; low = (int)__pa(&wall_clock); high = ((u64)__pa(&wall_clock) >> 32); + native_write_msr(MSR_KVM_WALL_CLOCK, low, high); - delta = kvm_clock_read(); + vcpu_time = &get_cpu_var(hv_clock); + pvclock_read_wallclock(&wall_clock, vcpu_time, &ts); + put_cpu_var(hv_clock); - native_write_msr(MSR_KVM_WALL_CLOCK, low, high); - do { - version = wall_clock.wc_version; - rmb(); - wc_sec = wall_clock.wc_sec; - wc_nsec = wall_clock.wc_nsec; - rmb(); - } while ((wall_clock.wc_version != version) || (version & 1)); - - delta = kvm_clock_read() - delta; - delta += wc_nsec; - nsec = do_div(delta, NSEC_PER_SEC); - set_normalized_timespec(&ts, wc_sec + delta, nsec); - /* - * Of all mechanisms of time adjustment I've tested, this one - * was the champion! - */ - return ts.tv_sec + 1; + return ts.tv_sec; } -int kvm_set_wallclock(unsigned long now) +static int kvm_set_wallclock(unsigned long now) { - return 0; + return -1; } -/* - * This is our read_clock function. The host puts an tsc timestamp each time - * it updates a new time. Without the tsc adjustment, we can have a situation - * in which a vcpu starts to run earlier (smaller system_time), but probes - * time later (compared to another vcpu), leading to backwards time - */ static cycle_t kvm_clock_read(void) { - u64 last_tsc, now; - int cpu; + struct pvclock_vcpu_time_info *src; + cycle_t ret; - preempt_disable(); - cpu = smp_processor_id(); - - last_tsc = get_clock(cpu, tsc_timestamp); - now = get_clock(cpu, system_time); - - now += kvm_get_delta(last_tsc); - preempt_enable(); - - return now; + src = &get_cpu_var(hv_clock); + ret = pvclock_clocksource_read(src); + put_cpu_var(hv_clock); + return ret; } + static struct clocksource kvm_clock = { .name = "kvm-clock", .read = kvm_clock_read, @@ -123,13 +88,14 @@ static struct clocksource kvm_clock = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -static int kvm_register_clock(void) +static int kvm_register_clock(char *txt) { int cpu = smp_processor_id(); int low, high; low = (int)__pa(&per_cpu(hv_clock, cpu)) | 1; high = ((u64)__pa(&per_cpu(hv_clock, cpu)) >> 32); - + printk(KERN_INFO "kvm-clock: cpu %d, msr %x:%x, %s\n", + cpu, high, low, txt); return native_write_msr_safe(MSR_KVM_SYSTEM_TIME, low, high); } @@ -140,12 +106,20 @@ static void kvm_setup_secondary_clock(void) * Now that the first cpu already had this clocksource initialized, * we shouldn't fail. */ - WARN_ON(kvm_register_clock()); + WARN_ON(kvm_register_clock("secondary cpu clock")); /* ok, done with our trickery, call native */ setup_secondary_APIC_clock(); } #endif +#ifdef CONFIG_SMP +void __init kvm_smp_prepare_boot_cpu(void) +{ + WARN_ON(kvm_register_clock("primary cpu clock")); + native_smp_prepare_boot_cpu(); +} +#endif + /* * After the clock is registered, the host will keep writing to the * registered memory location. If the guest happens to shutdown, this memory @@ -174,7 +148,7 @@ void __init kvmclock_init(void) return; if (kvmclock && kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE)) { - if (kvm_register_clock()) + if (kvm_register_clock("boot clock")) return; pv_time_ops.get_wallclock = kvm_get_wallclock; pv_time_ops.set_wallclock = kvm_set_wallclock; @@ -182,6 +156,9 @@ void __init kvmclock_init(void) #ifdef CONFIG_X86_LOCAL_APIC pv_apic_ops.setup_secondary_clock = kvm_setup_secondary_clock; #endif +#ifdef CONFIG_SMP + smp_ops.smp_prepare_boot_cpu = kvm_smp_prepare_boot_cpu; +#endif machine_ops.shutdown = kvm_shutdown; #ifdef CONFIG_KEXEC machine_ops.crash_shutdown = kvm_crash_shutdown; diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c index 0224c3637c73..21f2bae98c15 100644 --- a/arch/x86/kernel/ldt.c +++ b/arch/x86/kernel/ldt.c @@ -20,9 +20,9 @@ #include <asm/mmu_context.h> #ifdef CONFIG_SMP -static void flush_ldt(void *null) +static void flush_ldt(void *current_mm) { - if (current->active_mm) + if (current->active_mm == current_mm) load_LDT(¤t->active_mm->context); } #endif @@ -68,7 +68,7 @@ static int alloc_ldt(mm_context_t *pc, int mincount, int reload) load_LDT(pc); mask = cpumask_of_cpu(smp_processor_id()); if (!cpus_equal(current->mm->cpu_vm_mask, mask)) - smp_call_function(flush_ldt, NULL, 1, 1); + smp_call_function(flush_ldt, current->mm, 1, 1); preempt_enable(); #else load_LDT(pc); diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c index d0b234c9fc31..f4960171bc66 100644 --- a/arch/x86/kernel/machine_kexec_32.c +++ b/arch/x86/kernel/machine_kexec_32.c @@ -39,7 +39,7 @@ static void set_idt(void *newidt, __u16 limit) curidt.address = (unsigned long)newidt; load_idt(&curidt); -}; +} static void set_gdt(void *newgdt, __u16 limit) @@ -51,7 +51,7 @@ static void set_gdt(void *newgdt, __u16 limit) curgdt.address = (unsigned long)newgdt; load_gdt(&curgdt); -}; +} static void load_segments(void) { diff --git a/arch/x86/kernel/mfgpt_32.c b/arch/x86/kernel/mfgpt_32.c index 3cad17fe026b..07c0f828f488 100644 --- a/arch/x86/kernel/mfgpt_32.c +++ b/arch/x86/kernel/mfgpt_32.c @@ -155,6 +155,7 @@ int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable) wrmsr(msr, value, dummy); return 0; } +EXPORT_SYMBOL_GPL(geode_mfgpt_toggle_event); int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable) { @@ -222,6 +223,7 @@ int geode_mfgpt_alloc_timer(int timer, int domain) /* No timers available - too bad */ return -1; } +EXPORT_SYMBOL_GPL(geode_mfgpt_alloc_timer); #ifdef CONFIG_GEODE_MFGPT_TIMER diff --git a/arch/x86/kernel/microcode.c b/arch/x86/kernel/microcode.c index 69729e38b78a..9758fea87c5b 100644 --- a/arch/x86/kernel/microcode.c +++ b/arch/x86/kernel/microcode.c @@ -5,13 +5,14 @@ * 2006 Shaohua Li <shaohua.li@intel.com> * * This driver allows to upgrade microcode on Intel processors - * belonging to IA-32 family - PentiumPro, Pentium II, + * belonging to IA-32 family - PentiumPro, Pentium II, * Pentium III, Xeon, Pentium 4, etc. * - * Reference: Section 8.10 of Volume III, Intel Pentium 4 Manual, - * Order Number 245472 or free download from: - * - * http://developer.intel.com/design/pentium4/manuals/245472.htm + * Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture + * Software Developer's Manual + * Order Number 253668 or free download from: + * + * http://developer.intel.com/design/pentium4/manuals/253668.htm * * For more information, go to http://www.urbanmyth.org/microcode * @@ -58,12 +59,12 @@ * nature of implementation. * 1.11 22 Mar 2002 Tigran Aivazian <tigran@veritas.com> * Fix the panic when writing zero-length microcode chunk. - * 1.12 29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>, + * 1.12 29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>, * Jun Nakajima <jun.nakajima@intel.com> * Support for the microcode updates in the new format. * 1.13 10 Oct 2003 Tigran Aivazian <tigran@veritas.com> * Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl - * because we no longer hold a copy of applied microcode + * because we no longer hold a copy of applied microcode * in kernel memory. * 1.14 25 Jun 2004 Tigran Aivazian <tigran@veritas.com> * Fix sigmatch() macro to handle old CPUs with pf == 0. @@ -320,11 +321,11 @@ static void apply_microcode(int cpu) return; /* serialize access to the physical write to MSR 0x79 */ - spin_lock_irqsave(µcode_update_lock, flags); + spin_lock_irqsave(µcode_update_lock, flags); /* write microcode via MSR 0x79 */ wrmsr(MSR_IA32_UCODE_WRITE, - (unsigned long) uci->mc->bits, + (unsigned long) uci->mc->bits, (unsigned long) uci->mc->bits >> 16 >> 16); wrmsr(MSR_IA32_UCODE_REV, 0, 0); @@ -341,7 +342,7 @@ static void apply_microcode(int cpu) return; } printk(KERN_INFO "microcode: CPU%d updated from revision " - "0x%x to 0x%x, date = %08x \n", + "0x%x to 0x%x, date = %08x \n", cpu_num, uci->rev, val[1], uci->mc->hdr.date); uci->rev = val[1]; } @@ -534,7 +535,7 @@ static int cpu_request_microcode(int cpu) c->x86, c->x86_model, c->x86_mask); error = request_firmware(&firmware, name, µcode_pdev->dev); if (error) { - pr_debug("microcode: ucode data file %s load failed\n", name); + pr_debug("microcode: data file %s load failed\n", name); return error; } buf = firmware->data; @@ -805,6 +806,9 @@ static int __init microcode_init (void) { int error; + printk(KERN_INFO + "IA-32 Microcode Update Driver: v" MICROCODE_VERSION " <tigran@aivazian.fsnet.co.uk>\n"); + error = microcode_dev_init(); if (error) return error; @@ -825,9 +829,6 @@ static int __init microcode_init (void) } register_hotcpu_notifier(&mc_cpu_notifier); - - printk(KERN_INFO - "IA-32 Microcode Update Driver: v" MICROCODE_VERSION " <tigran@aivazian.fsnet.co.uk>\n"); return 0; } diff --git a/arch/x86/kernel/mmconf-fam10h_64.c b/arch/x86/kernel/mmconf-fam10h_64.c index edc5fbfe85c0..fdfdc550b366 100644 --- a/arch/x86/kernel/mmconf-fam10h_64.c +++ b/arch/x86/kernel/mmconf-fam10h_64.c @@ -12,6 +12,7 @@ #include <asm/io.h> #include <asm/msr.h> #include <asm/acpi.h> +#include <asm/mmconfig.h> #include "../pci/pci.h" diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index 11b14bbaa61e..6580dae46277 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -24,6 +24,8 @@ #include <linux/kdebug.h> #include <linux/slab.h> +#include <asm/i8259.h> +#include <asm/io_apic.h> #include <asm/smp.h> #include <asm/nmi.h> #include <asm/timer.h> @@ -131,7 +133,9 @@ int __init check_nmi_watchdog(void) kfree(prev_nmi_count); return 0; error: - timer_ack = !cpu_has_tsc; + if (nmi_watchdog == NMI_IO_APIC && !timer_through_8259) + disable_8259A_irq(0); + timer_ack = 0; return -1; } diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c index 5a29ded994fa..0060e44e8989 100644 --- a/arch/x86/kernel/nmi_64.c +++ b/arch/x86/kernel/nmi_64.c @@ -21,6 +21,8 @@ #include <linux/cpumask.h> #include <linux/kdebug.h> +#include <asm/i8259.h> +#include <asm/io_apic.h> #include <asm/smp.h> #include <asm/nmi.h> #include <asm/proto.h> @@ -90,7 +92,7 @@ int __init check_nmi_watchdog(void) prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL); if (!prev_nmi_count) - return -1; + goto error; printk(KERN_INFO "Testing NMI watchdog ... "); @@ -121,7 +123,7 @@ int __init check_nmi_watchdog(void) if (!atomic_read(&nmi_active)) { kfree(prev_nmi_count); atomic_set(&nmi_active, -1); - return -1; + goto error; } printk("OK.\n"); @@ -132,6 +134,11 @@ int __init check_nmi_watchdog(void) kfree(prev_nmi_count); return 0; +error: + if (nmi_watchdog == NMI_IO_APIC && !timer_through_8259) + disable_8259A_irq(0); + + return -1; } static int __init setup_nmi_watchdog(char *str) diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c index 74f0c5ea2a03..f1ab0f727007 100644 --- a/arch/x86/kernel/paravirt.c +++ b/arch/x86/kernel/paravirt.c @@ -380,6 +380,9 @@ struct pv_mmu_ops pv_mmu_ops = { .pte_update = paravirt_nop, .pte_update_defer = paravirt_nop, + .ptep_modify_prot_start = __ptep_modify_prot_start, + .ptep_modify_prot_commit = __ptep_modify_prot_commit, + #ifdef CONFIG_HIGHPTE .kmap_atomic_pte = kmap_atomic, #endif @@ -403,6 +406,7 @@ struct pv_mmu_ops pv_mmu_ops = { #endif /* PAGETABLE_LEVELS >= 3 */ .pte_val = native_pte_val, + .pte_flags = native_pte_val, .pgd_val = native_pgd_val, .make_pte = native_make_pte, diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index c5ef1af8e79d..3c43109ba054 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -77,10 +77,14 @@ void __init dma32_reserve_bootmem(void) if (end_pfn <= MAX_DMA32_PFN) return; + /* + * check aperture_64.c allocate_aperture() for reason about + * using 512M as goal + */ align = 64ULL<<20; size = round_up(dma32_bootmem_size, align); dma32_bootmem_ptr = __alloc_bootmem_nopanic(size, align, - __pa(MAX_DMA_ADDRESS)); + 512ULL<<20); if (dma32_bootmem_ptr) dma32_bootmem_size = size; else @@ -88,7 +92,6 @@ void __init dma32_reserve_bootmem(void) } static void __init dma32_free_bootmem(void) { - int node; if (end_pfn <= MAX_DMA32_PFN) return; @@ -96,9 +99,7 @@ static void __init dma32_free_bootmem(void) if (!dma32_bootmem_ptr) return; - for_each_online_node(node) - free_bootmem_node(NODE_DATA(node), __pa(dma32_bootmem_ptr), - dma32_bootmem_size); + free_bootmem(__pa(dma32_bootmem_ptr), dma32_bootmem_size); dma32_bootmem_ptr = NULL; dma32_bootmem_size = 0; @@ -357,7 +358,7 @@ int dma_supported(struct device *dev, u64 mask) EXPORT_SYMBOL(dma_supported); /* Allocate DMA memory on node near device */ -noinline struct page * +static noinline struct page * dma_alloc_pages(struct device *dev, gfp_t gfp, unsigned order) { int node; @@ -378,6 +379,7 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, struct page *page; unsigned long dma_mask = 0; dma_addr_t bus; + int noretry = 0; /* ignore region specifiers */ gfp &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32); @@ -397,20 +399,25 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, if (dev->dma_mask == NULL) return NULL; - /* Don't invoke OOM killer */ - gfp |= __GFP_NORETRY; + /* Don't invoke OOM killer or retry in lower 16MB DMA zone */ + if (gfp & __GFP_DMA) + noretry = 1; #ifdef CONFIG_X86_64 /* Why <=? Even when the mask is smaller than 4GB it is often larger than 16MB and in this case we have a chance of finding fitting memory in the next higher zone first. If not retry with true GFP_DMA. -AK */ - if (dma_mask <= DMA_32BIT_MASK && !(gfp & GFP_DMA)) + if (dma_mask <= DMA_32BIT_MASK && !(gfp & GFP_DMA)) { gfp |= GFP_DMA32; + if (dma_mask < DMA_32BIT_MASK) + noretry = 1; + } #endif again: - page = dma_alloc_pages(dev, gfp, get_order(size)); + page = dma_alloc_pages(dev, + noretry ? gfp | __GFP_NORETRY : gfp, get_order(size)); if (page == NULL) return NULL; diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index c07455d1695f..021f3c684a62 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -26,6 +26,7 @@ #include <linux/kdebug.h> #include <linux/scatterlist.h> #include <linux/iommu-helper.h> +#include <linux/sysdev.h> #include <asm/atomic.h> #include <asm/io.h> #include <asm/mtrr.h> @@ -103,7 +104,6 @@ static unsigned long alloc_iommu(struct device *dev, int size) size, base_index, boundary_size, 0); } if (offset != -1) { - set_bit_string(iommu_gart_bitmap, offset, size); next_bit = offset+size; if (next_bit >= iommu_pages) { next_bit = 0; @@ -533,8 +533,8 @@ static __init unsigned read_aperture(struct pci_dev *dev, u32 *size) unsigned aper_size = 0, aper_base_32, aper_order; u64 aper_base; - pci_read_config_dword(dev, 0x94, &aper_base_32); - pci_read_config_dword(dev, 0x90, &aper_order); + pci_read_config_dword(dev, AMD64_GARTAPERTUREBASE, &aper_base_32); + pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &aper_order); aper_order = (aper_order >> 1) & 7; aper_base = aper_base_32 & 0x7fff; @@ -548,6 +548,77 @@ static __init unsigned read_aperture(struct pci_dev *dev, u32 *size) return aper_base; } +static void enable_gart_translations(void) +{ + int i; + + for (i = 0; i < num_k8_northbridges; i++) { + struct pci_dev *dev = k8_northbridges[i]; + + enable_gart_translation(dev, __pa(agp_gatt_table)); + } +} + +/* + * If fix_up_north_bridges is set, the north bridges have to be fixed up on + * resume in the same way as they are handled in gart_iommu_hole_init(). + */ +static bool fix_up_north_bridges; +static u32 aperture_order; +static u32 aperture_alloc; + +void set_up_gart_resume(u32 aper_order, u32 aper_alloc) +{ + fix_up_north_bridges = true; + aperture_order = aper_order; + aperture_alloc = aper_alloc; +} + +static int gart_resume(struct sys_device *dev) +{ + printk(KERN_INFO "PCI-DMA: Resuming GART IOMMU\n"); + + if (fix_up_north_bridges) { + int i; + + printk(KERN_INFO "PCI-DMA: Restoring GART aperture settings\n"); + + for (i = 0; i < num_k8_northbridges; i++) { + struct pci_dev *dev = k8_northbridges[i]; + + /* + * Don't enable translations just yet. That is the next + * step. Restore the pre-suspend aperture settings. + */ + pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, + aperture_order << 1); + pci_write_config_dword(dev, AMD64_GARTAPERTUREBASE, + aperture_alloc >> 25); + } + } + + enable_gart_translations(); + + return 0; +} + +static int gart_suspend(struct sys_device *dev, pm_message_t state) +{ + return 0; +} + +static struct sysdev_class gart_sysdev_class = { + .name = "gart", + .suspend = gart_suspend, + .resume = gart_resume, + +}; + +static struct sys_device device_gart = { + .id = 0, + .cls = &gart_sysdev_class, +}; + /* * Private Northbridge GATT initialization in case we cannot use the * AGP driver for some reason. @@ -558,7 +629,7 @@ static __init int init_k8_gatt(struct agp_kern_info *info) unsigned aper_base, new_aper_base; struct pci_dev *dev; void *gatt; - int i; + int i, error; printk(KERN_INFO "PCI-DMA: Disabling AGP.\n"); aper_size = aper_base = info->aper_size = 0; @@ -591,21 +662,14 @@ static __init int init_k8_gatt(struct agp_kern_info *info) memset(gatt, 0, gatt_size); agp_gatt_table = gatt; - for (i = 0; i < num_k8_northbridges; i++) { - u32 gatt_reg; - u32 ctl; + enable_gart_translations(); - dev = k8_northbridges[i]; - gatt_reg = __pa(gatt) >> 12; - gatt_reg <<= 4; - pci_write_config_dword(dev, 0x98, gatt_reg); - pci_read_config_dword(dev, 0x90, &ctl); + error = sysdev_class_register(&gart_sysdev_class); + if (!error) + error = sysdev_register(&device_gart); + if (error) + panic("Could not register gart_sysdev -- would corrupt data on next suspend"); - ctl |= 1; - ctl &= ~((1<<4) | (1<<5)); - - pci_write_config_dword(dev, 0x90, ctl); - } flush_gart(); printk(KERN_INFO "PCI-DMA: aperture base @ %x size %u KB\n", @@ -648,11 +712,11 @@ void gart_iommu_shutdown(void) u32 ctl; dev = k8_northbridges[i]; - pci_read_config_dword(dev, 0x90, &ctl); + pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl); - ctl &= ~1; + ctl &= ~GARTEN; - pci_write_config_dword(dev, 0x90, ctl); + pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl); } } @@ -759,10 +823,10 @@ void __init gart_iommu_init(void) wbinvd(); /* - * Try to workaround a bug (thanks to BenH) + * Try to workaround a bug (thanks to BenH): * Set unmapped entries to a scratch page instead of 0. * Any prefetches that hit unmapped entries won't get an bus abort - * then. + * then. (P2P bridge may be prefetching on DMA reads). */ scratch = get_zeroed_page(GFP_KERNEL); if (!scratch) diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index ba370dc8685b..4061d63aabe7 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -6,6 +6,7 @@ #include <linux/sched.h> #include <linux/module.h> #include <linux/pm.h> +#include <linux/clockchips.h> struct kmem_cache *task_xstate_cachep; @@ -45,6 +46,76 @@ void arch_task_cache_init(void) SLAB_PANIC, NULL); } +/* + * Idle related variables and functions + */ +unsigned long boot_option_idle_override = 0; +EXPORT_SYMBOL(boot_option_idle_override); + +/* + * Powermanagement idle function, if any.. + */ +void (*pm_idle)(void); +EXPORT_SYMBOL(pm_idle); + +#ifdef CONFIG_X86_32 +/* + * This halt magic was a workaround for ancient floppy DMA + * wreckage. It should be safe to remove. + */ +static int hlt_counter; +void disable_hlt(void) +{ + hlt_counter++; +} +EXPORT_SYMBOL(disable_hlt); + +void enable_hlt(void) +{ + hlt_counter--; +} +EXPORT_SYMBOL(enable_hlt); + +static inline int hlt_use_halt(void) +{ + return (!hlt_counter && boot_cpu_data.hlt_works_ok); +} +#else +static inline int hlt_use_halt(void) +{ + return 1; +} +#endif + +/* + * We use this if we don't have any better + * idle routine.. + */ +void default_idle(void) +{ + if (hlt_use_halt()) { + current_thread_info()->status &= ~TS_POLLING; + /* + * TS_POLLING-cleared state must be visible before we + * test NEED_RESCHED: + */ + smp_mb(); + + if (!need_resched()) + safe_halt(); /* enables interrupts racelessly */ + else + local_irq_enable(); + current_thread_info()->status |= TS_POLLING; + } else { + local_irq_enable(); + /* loop is done by the caller */ + cpu_relax(); + } +} +#ifdef CONFIG_APM_MODULE +EXPORT_SYMBOL(default_idle); +#endif + static void do_nothing(void *unused) { } @@ -122,44 +193,129 @@ static void poll_idle(void) * * idle=mwait overrides this decision and forces the usage of mwait. */ + +#define MWAIT_INFO 0x05 +#define MWAIT_ECX_EXTENDED_INFO 0x01 +#define MWAIT_EDX_C1 0xf0 + static int __cpuinit mwait_usable(const struct cpuinfo_x86 *c) { + u32 eax, ebx, ecx, edx; + if (force_mwait) return 1; - if (c->x86_vendor == X86_VENDOR_AMD) { - switch(c->x86) { - case 0x10: - case 0x11: - return 0; - } - } + if (c->cpuid_level < MWAIT_INFO) + return 0; + + cpuid(MWAIT_INFO, &eax, &ebx, &ecx, &edx); + /* Check, whether EDX has extended info about MWAIT */ + if (!(ecx & MWAIT_ECX_EXTENDED_INFO)) + return 1; + + /* + * edx enumeratios MONITOR/MWAIT extensions. Check, whether + * C1 supports MWAIT + */ + return (edx & MWAIT_EDX_C1); +} + +/* + * Check for AMD CPUs, which have potentially C1E support + */ +static int __cpuinit check_c1e_idle(const struct cpuinfo_x86 *c) +{ + if (c->x86_vendor != X86_VENDOR_AMD) + return 0; + + if (c->x86 < 0x0F) + return 0; + + /* Family 0x0f models < rev F do not have C1E */ + if (c->x86 == 0x0f && c->x86_model < 0x40) + return 0; + return 1; } -void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c) +/* + * C1E aware idle routine. We check for C1E active in the interrupt + * pending message MSR. If we detect C1E, then we handle it the same + * way as C3 power states (local apic timer and TSC stop) + */ +static void c1e_idle(void) { - static int selected; + static cpumask_t c1e_mask = CPU_MASK_NONE; + static int c1e_detected; - if (selected) + if (need_resched()) return; + + if (!c1e_detected) { + u32 lo, hi; + + rdmsr(MSR_K8_INT_PENDING_MSG, lo, hi); + if (lo & K8_INTP_C1E_ACTIVE_MASK) { + c1e_detected = 1; + mark_tsc_unstable("TSC halt in C1E"); + printk(KERN_INFO "System has C1E enabled\n"); + } + } + + if (c1e_detected) { + int cpu = smp_processor_id(); + + if (!cpu_isset(cpu, c1e_mask)) { + cpu_set(cpu, c1e_mask); + /* + * Force broadcast so ACPI can not interfere. Needs + * to run with interrupts enabled as it uses + * smp_function_call. + */ + local_irq_enable(); + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE, + &cpu); + printk(KERN_INFO "Switch to broadcast mode on CPU%d\n", + cpu); + local_irq_disable(); + } + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu); + + default_idle(); + + /* + * The switch back from broadcast mode needs to be + * called with interrupts disabled. + */ + local_irq_disable(); + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu); + local_irq_enable(); + } else + default_idle(); +} + +void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c) +{ #ifdef CONFIG_X86_SMP if (pm_idle == poll_idle && smp_num_siblings > 1) { printk(KERN_WARNING "WARNING: polling idle and HT enabled," " performance may degrade.\n"); } #endif + if (pm_idle) + return; + if (cpu_has(c, X86_FEATURE_MWAIT) && mwait_usable(c)) { /* - * Skip, if setup has overridden idle. * One CPU supports mwait => All CPUs supports mwait */ - if (!pm_idle) { - printk(KERN_INFO "using mwait in idle threads.\n"); - pm_idle = mwait_idle; - } - } - selected = 1; + printk(KERN_INFO "using mwait in idle threads.\n"); + pm_idle = mwait_idle; + } else if (check_c1e_idle(c)) { + printk(KERN_INFO "using C1E aware idle routine\n"); + pm_idle = c1e_idle; + } else + pm_idle = default_idle; } static int __init idle_setup(char *str) diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index f8476dfbb60d..c2a11d77b1b5 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -58,11 +58,6 @@ asmlinkage void ret_from_fork(void) __asm__("ret_from_fork"); -static int hlt_counter; - -unsigned long boot_option_idle_override = 0; -EXPORT_SYMBOL(boot_option_idle_override); - DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task; EXPORT_PER_CPU_SYMBOL(current_task); @@ -77,55 +72,6 @@ unsigned long thread_saved_pc(struct task_struct *tsk) return ((unsigned long *)tsk->thread.sp)[3]; } -/* - * Powermanagement idle function, if any.. - */ -void (*pm_idle)(void); -EXPORT_SYMBOL(pm_idle); - -void disable_hlt(void) -{ - hlt_counter++; -} - -EXPORT_SYMBOL(disable_hlt); - -void enable_hlt(void) -{ - hlt_counter--; -} - -EXPORT_SYMBOL(enable_hlt); - -/* - * We use this if we don't have any better - * idle routine.. - */ -void default_idle(void) -{ - if (!hlt_counter && boot_cpu_data.hlt_works_ok) { - current_thread_info()->status &= ~TS_POLLING; - /* - * TS_POLLING-cleared state must be visible before we - * test NEED_RESCHED: - */ - smp_mb(); - - if (!need_resched()) - safe_halt(); /* enables interrupts racelessly */ - else - local_irq_enable(); - current_thread_info()->status |= TS_POLLING; - } else { - local_irq_enable(); - /* loop is done by the caller */ - cpu_relax(); - } -} -#ifdef CONFIG_APM_MODULE -EXPORT_SYMBOL(default_idle); -#endif - #ifdef CONFIG_HOTPLUG_CPU #include <asm/nmi.h> /* We don't actually take CPU down, just spin without interrupts. */ @@ -168,24 +114,19 @@ void cpu_idle(void) while (1) { tick_nohz_stop_sched_tick(); while (!need_resched()) { - void (*idle)(void); check_pgt_cache(); rmb(); - idle = pm_idle; if (rcu_pending(cpu)) rcu_check_callbacks(cpu, 0); - if (!idle) - idle = default_idle; - if (cpu_is_offline(cpu)) play_dead(); local_irq_disable(); __get_cpu_var(irq_stat).idle_timestamp = jiffies; - idle(); + pm_idle(); } tick_nohz_restart_sched_tick(); preempt_enable_no_resched(); @@ -333,6 +274,7 @@ void flush_thread(void) /* * Forget coprocessor state.. */ + tsk->fpu_counter = 0; clear_fpu(tsk); clear_used_math(); } @@ -649,8 +591,11 @@ struct task_struct * __switch_to(struct task_struct *prev_p, struct task_struct /* If the task has used fpu the last 5 timeslices, just do a full * restore of the math state immediately to avoid the trap; the * chances of needing FPU soon are obviously high now + * + * tsk_used_math() checks prevent calling math_state_restore(), + * which can sleep in the case of !tsk_used_math() */ - if (next_p->fpu_counter > 5) + if (tsk_used_math(next_p) && next_p->fpu_counter > 5) math_state_restore(); /* diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index e2319f39988b..290183e9731a 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -56,15 +56,6 @@ asmlinkage extern void ret_from_fork(void); unsigned long kernel_thread_flags = CLONE_VM | CLONE_UNTRACED; -unsigned long boot_option_idle_override = 0; -EXPORT_SYMBOL(boot_option_idle_override); - -/* - * Powermanagement idle function, if any.. - */ -void (*pm_idle)(void); -EXPORT_SYMBOL(pm_idle); - static ATOMIC_NOTIFIER_HEAD(idle_notifier); void idle_notifier_register(struct notifier_block *n) @@ -94,25 +85,6 @@ void exit_idle(void) __exit_idle(); } -/* - * We use this if we don't have any better - * idle routine.. - */ -void default_idle(void) -{ - current_thread_info()->status &= ~TS_POLLING; - /* - * TS_POLLING-cleared state must be visible before we - * test NEED_RESCHED: - */ - smp_mb(); - if (!need_resched()) - safe_halt(); /* enables interrupts racelessly */ - else - local_irq_enable(); - current_thread_info()->status |= TS_POLLING; -} - #ifdef CONFIG_HOTPLUG_CPU DECLARE_PER_CPU(int, cpu_state); @@ -150,12 +122,9 @@ void cpu_idle(void) while (1) { tick_nohz_stop_sched_tick(); while (!need_resched()) { - void (*idle)(void); rmb(); - idle = pm_idle; - if (!idle) - idle = default_idle; + if (cpu_is_offline(smp_processor_id())) play_dead(); /* @@ -165,7 +134,7 @@ void cpu_idle(void) */ local_irq_disable(); enter_idle(); - idle(); + pm_idle(); /* In many cases the interrupt that ended idle has already called exit_idle. But some idle loops can be woken up without interrupt. */ @@ -294,6 +263,7 @@ void flush_thread(void) /* * Forget coprocessor state.. */ + tsk->fpu_counter = 0; clear_fpu(tsk); clear_used_math(); } @@ -658,8 +628,11 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) /* If the task has used fpu the last 5 timeslices, just do a full * restore of the math state immediately to avoid the trap; the * chances of needing FPU soon are obviously high now + * + * tsk_used_math() checks prevent calling math_state_restore(), + * which can sleep in the case of !tsk_used_math() */ - if (next_p->fpu_counter>5) + if (tsk_used_math(next_p) && next_p->fpu_counter > 5) math_state_restore(); return prev_p; } diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c new file mode 100644 index 000000000000..05fbe9a0325a --- /dev/null +++ b/arch/x86/kernel/pvclock.c @@ -0,0 +1,141 @@ +/* paravirtual clock -- common code used by kvm/xen + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include <linux/kernel.h> +#include <linux/percpu.h> +#include <asm/pvclock.h> + +/* + * These are perodically updated + * xen: magic shared_info page + * kvm: gpa registered via msr + * and then copied here. + */ +struct pvclock_shadow_time { + u64 tsc_timestamp; /* TSC at last update of time vals. */ + u64 system_timestamp; /* Time, in nanosecs, since boot. */ + u32 tsc_to_nsec_mul; + int tsc_shift; + u32 version; +}; + +/* + * Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction, + * yielding a 64-bit result. + */ +static inline u64 scale_delta(u64 delta, u32 mul_frac, int shift) +{ + u64 product; +#ifdef __i386__ + u32 tmp1, tmp2; +#endif + + if (shift < 0) + delta >>= -shift; + else + delta <<= shift; + +#ifdef __i386__ + __asm__ ( + "mul %5 ; " + "mov %4,%%eax ; " + "mov %%edx,%4 ; " + "mul %5 ; " + "xor %5,%5 ; " + "add %4,%%eax ; " + "adc %5,%%edx ; " + : "=A" (product), "=r" (tmp1), "=r" (tmp2) + : "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) ); +#elif __x86_64__ + __asm__ ( + "mul %%rdx ; shrd $32,%%rdx,%%rax" + : "=a" (product) : "0" (delta), "d" ((u64)mul_frac) ); +#else +#error implement me! +#endif + + return product; +} + +static u64 pvclock_get_nsec_offset(struct pvclock_shadow_time *shadow) +{ + u64 delta = native_read_tsc() - shadow->tsc_timestamp; + return scale_delta(delta, shadow->tsc_to_nsec_mul, shadow->tsc_shift); +} + +/* + * Reads a consistent set of time-base values from hypervisor, + * into a shadow data area. + */ +static unsigned pvclock_get_time_values(struct pvclock_shadow_time *dst, + struct pvclock_vcpu_time_info *src) +{ + do { + dst->version = src->version; + rmb(); /* fetch version before data */ + dst->tsc_timestamp = src->tsc_timestamp; + dst->system_timestamp = src->system_time; + dst->tsc_to_nsec_mul = src->tsc_to_system_mul; + dst->tsc_shift = src->tsc_shift; + rmb(); /* test version after fetching data */ + } while ((src->version & 1) || (dst->version != src->version)); + + return dst->version; +} + +cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src) +{ + struct pvclock_shadow_time shadow; + unsigned version; + cycle_t ret, offset; + + do { + version = pvclock_get_time_values(&shadow, src); + barrier(); + offset = pvclock_get_nsec_offset(&shadow); + ret = shadow.system_timestamp + offset; + barrier(); + } while (version != src->version); + + return ret; +} + +void pvclock_read_wallclock(struct pvclock_wall_clock *wall_clock, + struct pvclock_vcpu_time_info *vcpu_time, + struct timespec *ts) +{ + u32 version; + u64 delta; + struct timespec now; + + /* get wallclock at system boot */ + do { + version = wall_clock->version; + rmb(); /* fetch version before time */ + now.tv_sec = wall_clock->sec; + now.tv_nsec = wall_clock->nsec; + rmb(); /* fetch time before checking version */ + } while ((wall_clock->version & 1) || (version != wall_clock->version)); + + delta = pvclock_clocksource_read(vcpu_time); /* time since system boot */ + delta += now.tv_sec * (u64)NSEC_PER_SEC + now.tv_nsec; + + now.tv_nsec = do_div(delta, NSEC_PER_SEC); + now.tv_sec = delta; + + set_normalized_timespec(ts, now.tv_sec, now.tv_nsec); +} diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c index d89a648fe710..79bdcd11c66e 100644 --- a/arch/x86/kernel/quirks.c +++ b/arch/x86/kernel/quirks.c @@ -65,6 +65,7 @@ static enum { ICH_FORCE_HPET_RESUME, VT8237_FORCE_HPET_RESUME, NVIDIA_FORCE_HPET_RESUME, + ATI_FORCE_HPET_RESUME, } force_hpet_resume_type; static void __iomem *rcba_base; @@ -158,6 +159,8 @@ static void ich_force_enable_hpet(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, ich_force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, + ich_force_enable_hpet); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, ich_force_enable_hpet); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, @@ -174,6 +177,12 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7, static struct pci_dev *cached_dev; +static void hpet_print_force_info(void) +{ + printk(KERN_INFO "HPET not enabled in BIOS. " + "You might try hpet=force boot option\n"); +} + static void old_ich_force_hpet_resume(void) { u32 val; @@ -253,6 +262,8 @@ static void old_ich_force_enable_hpet_user(struct pci_dev *dev) { if (hpet_force_user) old_ich_force_enable_hpet(dev); + else + hpet_print_force_info(); } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, @@ -290,8 +301,13 @@ static void vt8237_force_enable_hpet(struct pci_dev *dev) { u32 uninitialized_var(val); - if (!hpet_force_user || hpet_address || force_hpet_address) + if (hpet_address || force_hpet_address) + return; + + if (!hpet_force_user) { + hpet_print_force_info(); return; + } pci_read_config_dword(dev, 0x68, &val); /* @@ -330,6 +346,36 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, vt8237_force_enable_hpet); +static void ati_force_hpet_resume(void) +{ + pci_write_config_dword(cached_dev, 0x14, 0xfed00000); + printk(KERN_DEBUG "Force enabled HPET at resume\n"); +} + +static void ati_force_enable_hpet(struct pci_dev *dev) +{ + u32 uninitialized_var(val); + + if (hpet_address || force_hpet_address) + return; + + if (!hpet_force_user) { + hpet_print_force_info(); + return; + } + + pci_write_config_dword(dev, 0x14, 0xfed00000); + pci_read_config_dword(dev, 0x14, &val); + force_hpet_address = val; + force_hpet_resume_type = ATI_FORCE_HPET_RESUME; + dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n", + force_hpet_address); + cached_dev = dev; + return; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS, + ati_force_enable_hpet); + /* * Undocumented chipset feature taken from LinuxBIOS. */ @@ -343,8 +389,13 @@ static void nvidia_force_enable_hpet(struct pci_dev *dev) { u32 uninitialized_var(val); - if (!hpet_force_user || hpet_address || force_hpet_address) + if (hpet_address || force_hpet_address) + return; + + if (!hpet_force_user) { + hpet_print_force_info(); return; + } pci_write_config_dword(dev, 0x44, 0xfed00001); pci_read_config_dword(dev, 0x44, &val); @@ -397,6 +448,9 @@ void force_hpet_resume(void) case NVIDIA_FORCE_HPET_RESUME: nvidia_force_hpet_resume(); return; + case ATI_FORCE_HPET_RESUME: + ati_force_hpet_resume(); + return; default: break; } diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index f6be7d5f82f8..f8a62160e151 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -27,7 +27,7 @@ void (*pm_power_off)(void); EXPORT_SYMBOL(pm_power_off); -static long no_idt[3]; +static const struct desc_ptr no_idt = {}; static int reboot_mode; enum reboot_type reboot_type = BOOT_KBD; int reboot_force; @@ -201,15 +201,15 @@ core_initcall(reboot_init); controller to pulse the CPU reset line, which is more thorough, but doesn't work with at least one type of 486 motherboard. It is easy to stop this code working; hence the copious comments. */ -static unsigned long long +static const unsigned long long real_mode_gdt_entries [3] = { 0x0000000000000000ULL, /* Null descriptor */ - 0x00009a000000ffffULL, /* 16-bit real-mode 64k code at 0x00000000 */ - 0x000092000100ffffULL /* 16-bit real-mode 64k data at 0x00000100 */ + 0x00009b000000ffffULL, /* 16-bit real-mode 64k code at 0x00000000 */ + 0x000093000100ffffULL /* 16-bit real-mode 64k data at 0x00000100 */ }; -static struct desc_ptr +static const struct desc_ptr real_mode_gdt = { sizeof (real_mode_gdt_entries) - 1, (long)real_mode_gdt_entries }, real_mode_idt = { 0x3ff, 0 }; @@ -231,7 +231,7 @@ real_mode_idt = { 0x3ff, 0 }; More could be done here to set up the registers as if a CPU reset had occurred; hopefully real BIOSs don't assume much. */ -static unsigned char real_mode_switch [] = +static const unsigned char real_mode_switch [] = { 0x66, 0x0f, 0x20, 0xc0, /* movl %cr0,%eax */ 0x66, 0x83, 0xe0, 0x11, /* andl $0x00000011,%eax */ @@ -245,7 +245,7 @@ static unsigned char real_mode_switch [] = 0x24, 0x10, /* f: andb $0x10,al */ 0x66, 0x0f, 0x22, 0xc0 /* movl %eax,%cr0 */ }; -static unsigned char jump_to_bios [] = +static const unsigned char jump_to_bios [] = { 0xea, 0x00, 0x00, 0xff, 0xff /* ljmp $0xffff,$0x0000 */ }; @@ -255,7 +255,7 @@ static unsigned char jump_to_bios [] = * specified by the code and length parameters. * We assume that length will aways be less that 100! */ -void machine_real_restart(unsigned char *code, int length) +void machine_real_restart(const unsigned char *code, int length) { local_irq_disable(); @@ -368,7 +368,7 @@ static void native_machine_emergency_restart(void) } case BOOT_TRIPLE: - load_idt((const struct desc_ptr *)&no_idt); + load_idt(&no_idt); __asm__ __volatile__("int3"); reboot_type = BOOT_KBD; diff --git a/arch/x86/kernel/reboot_fixups_32.c b/arch/x86/kernel/reboot_fixups_32.c index dec0b5ec25c2..61a837743fe5 100644 --- a/arch/x86/kernel/reboot_fixups_32.c +++ b/arch/x86/kernel/reboot_fixups_32.c @@ -49,7 +49,7 @@ struct device_fixup { void (*reboot_fixup)(struct pci_dev *); }; -static struct device_fixup fixups_table[] = { +static const struct device_fixup fixups_table[] = { { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset }, { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, cs5536_warm_reset }, { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE, cs5530a_warm_reset }, @@ -64,7 +64,7 @@ static struct device_fixup fixups_table[] = { */ void mach_reboot_fixups(void) { - struct device_fixup *cur; + const struct device_fixup *cur; struct pci_dev *dev; int i; diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c index 9615eee9b775..05191bbc68b8 100644 --- a/arch/x86/kernel/rtc.c +++ b/arch/x86/kernel/rtc.c @@ -4,6 +4,8 @@ #include <linux/acpi.h> #include <linux/bcd.h> #include <linux/mc146818rtc.h> +#include <linux/platform_device.h> +#include <linux/pnp.h> #include <asm/time.h> #include <asm/vsyscall.h> @@ -197,3 +199,35 @@ unsigned long long native_read_tsc(void) } EXPORT_SYMBOL(native_read_tsc); + +static struct resource rtc_resources[] = { + [0] = { + .start = RTC_PORT(0), + .end = RTC_PORT(1), + .flags = IORESOURCE_IO, + }, + [1] = { + .start = RTC_IRQ, + .end = RTC_IRQ, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device rtc_device = { + .name = "rtc_cmos", + .id = -1, + .resource = rtc_resources, + .num_resources = ARRAY_SIZE(rtc_resources), +}; + +static __init int add_rtc_cmos(void) +{ +#ifdef CONFIG_PNP + if (!pnp_platform_devices) + platform_device_register(&rtc_device); +#else + platform_device_register(&rtc_device); +#endif /* CONFIG_PNP */ + return 0; +} +device_initcall(add_rtc_cmos); diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index 2c5f8b213e86..5a2f8e063887 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -532,10 +532,16 @@ static void __init reserve_crashkernel(void) (unsigned long)(crash_size >> 20), (unsigned long)(crash_base >> 20), (unsigned long)(total_mem >> 20)); + + if (reserve_bootmem(crash_base, crash_size, + BOOTMEM_EXCLUSIVE) < 0) { + printk(KERN_INFO "crashkernel reservation " + "failed - memory is in use\n"); + return; + } + crashk_res.start = crash_base; crashk_res.end = crash_base + crash_size - 1; - reserve_bootmem(crash_base, crash_size, - BOOTMEM_DEFAULT); } else printk(KERN_INFO "crashkernel reservation failed - " "you have to specify a base address\n"); diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 6dff1286ad8a..545440e471b2 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -71,6 +71,7 @@ #include <asm/topology.h> #include <asm/trampoline.h> #include <asm/pat.h> +#include <asm/mmconfig.h> #include <mach_apic.h> #ifdef CONFIG_PARAVIRT @@ -79,6 +80,8 @@ #define ARCH_SETUP #endif +#include "cpu/cpu.h" + /* * Machine setup.. */ @@ -95,8 +98,6 @@ int bootloader_type; unsigned long saved_video_mode; -int force_mwait __cpuinitdata; - /* * Early DMI memory */ @@ -118,7 +119,7 @@ EXPORT_SYMBOL_GPL(edid_info); extern int root_mountflags; -char __initdata command_line[COMMAND_LINE_SIZE]; +static char __initdata command_line[COMMAND_LINE_SIZE]; static struct resource standard_io_resources[] = { { .name = "dma1", .start = 0x00, .end = 0x1f, @@ -164,6 +165,7 @@ static struct resource bss_resource = { .flags = IORESOURCE_RAM, }; +static void __init early_cpu_init(void); static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c); #ifdef CONFIG_PROC_VMCORE @@ -293,18 +295,6 @@ static void __init parse_setup_data(void) } } -#ifdef CONFIG_PCI_MMCONFIG -extern void __cpuinit fam10h_check_enable_mmcfg(void); -extern void __init check_enable_amd_mmconf_dmi(void); -#else -void __cpuinit fam10h_check_enable_mmcfg(void) -{ -} -void __init check_enable_amd_mmconf_dmi(void) -{ -} -#endif - /* * setup_arch - architecture-specific boot-time initializations * @@ -352,6 +342,7 @@ void __init setup_arch(char **cmdline_p) bss_resource.start = virt_to_phys(&__bss_start); bss_resource.end = virt_to_phys(&__bss_stop)-1; + early_cpu_init(); early_identify_cpu(&boot_cpu_data); strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); @@ -537,7 +528,20 @@ void __init setup_arch(char **cmdline_p) check_enable_amd_mmconf_dmi(); } -static int __cpuinit get_model_name(struct cpuinfo_x86 *c) +struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {}; + +static void __cpuinit default_init(struct cpuinfo_x86 *c) +{ + display_cacheinfo(c); +} + +static struct cpu_dev __cpuinitdata default_cpu = { + .c_init = default_init, + .c_vendor = "Unknown", +}; +static struct cpu_dev *this_cpu __cpuinitdata = &default_cpu; + +int __cpuinit get_model_name(struct cpuinfo_x86 *c) { unsigned int *v; @@ -553,7 +557,7 @@ static int __cpuinit get_model_name(struct cpuinfo_x86 *c) } -static void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) +void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) { unsigned int n, dummy, eax, ebx, ecx, edx; @@ -585,228 +589,6 @@ static void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) } } -#ifdef CONFIG_NUMA -static int __cpuinit nearby_node(int apicid) -{ - int i, node; - - for (i = apicid - 1; i >= 0; i--) { - node = apicid_to_node[i]; - if (node != NUMA_NO_NODE && node_online(node)) - return node; - } - for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) { - node = apicid_to_node[i]; - if (node != NUMA_NO_NODE && node_online(node)) - return node; - } - return first_node(node_online_map); /* Shouldn't happen */ -} -#endif - -/* - * On a AMD dual core setup the lower bits of the APIC id distingush the cores. - * Assumes number of cores is a power of two. - */ -static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c) -{ -#ifdef CONFIG_SMP - unsigned bits; -#ifdef CONFIG_NUMA - int cpu = smp_processor_id(); - int node = 0; - unsigned apicid = hard_smp_processor_id(); -#endif - bits = c->x86_coreid_bits; - - /* Low order bits define the core id (index of core in socket) */ - c->cpu_core_id = c->initial_apicid & ((1 << bits)-1); - /* Convert the initial APIC ID into the socket ID */ - c->phys_proc_id = c->initial_apicid >> bits; - -#ifdef CONFIG_NUMA - node = c->phys_proc_id; - if (apicid_to_node[apicid] != NUMA_NO_NODE) - node = apicid_to_node[apicid]; - if (!node_online(node)) { - /* Two possibilities here: - - The CPU is missing memory and no node was created. - In that case try picking one from a nearby CPU - - The APIC IDs differ from the HyperTransport node IDs - which the K8 northbridge parsing fills in. - Assume they are all increased by a constant offset, - but in the same order as the HT nodeids. - If that doesn't result in a usable node fall back to the - path for the previous case. */ - - int ht_nodeid = c->initial_apicid; - - if (ht_nodeid >= 0 && - apicid_to_node[ht_nodeid] != NUMA_NO_NODE) - node = apicid_to_node[ht_nodeid]; - /* Pick a nearby node */ - if (!node_online(node)) - node = nearby_node(apicid); - } - numa_set_node(cpu, node); - - printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); -#endif -#endif -} - -static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c) -{ -#ifdef CONFIG_SMP - unsigned bits, ecx; - - /* Multi core CPU? */ - if (c->extended_cpuid_level < 0x80000008) - return; - - ecx = cpuid_ecx(0x80000008); - - c->x86_max_cores = (ecx & 0xff) + 1; - - /* CPU telling us the core id bits shift? */ - bits = (ecx >> 12) & 0xF; - - /* Otherwise recompute */ - if (bits == 0) { - while ((1 << bits) < c->x86_max_cores) - bits++; - } - - c->x86_coreid_bits = bits; - -#endif -} - -#define ENABLE_C1E_MASK 0x18000000 -#define CPUID_PROCESSOR_SIGNATURE 1 -#define CPUID_XFAM 0x0ff00000 -#define CPUID_XFAM_K8 0x00000000 -#define CPUID_XFAM_10H 0x00100000 -#define CPUID_XFAM_11H 0x00200000 -#define CPUID_XMOD 0x000f0000 -#define CPUID_XMOD_REV_F 0x00040000 - -/* AMD systems with C1E don't have a working lAPIC timer. Check for that. */ -static __cpuinit int amd_apic_timer_broken(void) -{ - u32 lo, hi, eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); - - switch (eax & CPUID_XFAM) { - case CPUID_XFAM_K8: - if ((eax & CPUID_XMOD) < CPUID_XMOD_REV_F) - break; - case CPUID_XFAM_10H: - case CPUID_XFAM_11H: - rdmsr(MSR_K8_ENABLE_C1E, lo, hi); - if (lo & ENABLE_C1E_MASK) - return 1; - break; - default: - /* err on the side of caution */ - return 1; - } - return 0; -} - -static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) -{ - early_init_amd_mc(c); - - /* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */ - if (c->x86_power & (1<<8)) - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); -} - -static void __cpuinit init_amd(struct cpuinfo_x86 *c) -{ - unsigned level; - -#ifdef CONFIG_SMP - unsigned long value; - - /* - * Disable TLB flush filter by setting HWCR.FFDIS on K8 - * bit 6 of msr C001_0015 - * - * Errata 63 for SH-B3 steppings - * Errata 122 for all steppings (F+ have it disabled by default) - */ - if (c->x86 == 15) { - rdmsrl(MSR_K8_HWCR, value); - value |= 1 << 6; - wrmsrl(MSR_K8_HWCR, value); - } -#endif - - /* Bit 31 in normal CPUID used for nonstandard 3DNow ID; - 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */ - clear_cpu_cap(c, 0*32+31); - - /* On C+ stepping K8 rep microcode works well for copy/memset */ - level = cpuid_eax(1); - if (c->x86 == 15 && ((level >= 0x0f48 && level < 0x0f50) || - level >= 0x0f58)) - set_cpu_cap(c, X86_FEATURE_REP_GOOD); - if (c->x86 == 0x10 || c->x86 == 0x11) - set_cpu_cap(c, X86_FEATURE_REP_GOOD); - - /* Enable workaround for FXSAVE leak */ - if (c->x86 >= 6) - set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK); - - level = get_model_name(c); - if (!level) { - switch (c->x86) { - case 15: - /* Should distinguish Models here, but this is only - a fallback anyways. */ - strcpy(c->x86_model_id, "Hammer"); - break; - } - } - display_cacheinfo(c); - - /* Multi core CPU? */ - if (c->extended_cpuid_level >= 0x80000008) - amd_detect_cmp(c); - - if (c->extended_cpuid_level >= 0x80000006 && - (cpuid_edx(0x80000006) & 0xf000)) - num_cache_leaves = 4; - else - num_cache_leaves = 3; - - if (c->x86 == 0xf || c->x86 == 0x10 || c->x86 == 0x11) - set_cpu_cap(c, X86_FEATURE_K8); - - /* MFENCE stops RDTSC speculation */ - set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC); - - if (c->x86 == 0x10) - fam10h_check_enable_mmcfg(); - - if (amd_apic_timer_broken()) - disable_apic_timer = 1; - - if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) { - unsigned long long tseg; - - /* - * Split up direct mapping around the TSEG SMM area. - * Don't do it for gbpages because there seems very little - * benefit in doing so. - */ - if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg) && - (tseg >> PMD_SHIFT) < (max_pfn_mapped >> (PMD_SHIFT-PAGE_SHIFT))) - set_memory_4k((unsigned long)__va(tseg), 1); - } -} - void __cpuinit detect_ht(struct cpuinfo_x86 *c) { #ifdef CONFIG_SMP @@ -857,135 +639,59 @@ out: #endif } -/* - * find out the number of processor cores on the die - */ -static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c) -{ - unsigned int eax, t; - - if (c->cpuid_level < 4) - return 1; - - cpuid_count(4, 0, &eax, &t, &t, &t); - - if (eax & 0x1f) - return ((eax >> 26) + 1); - else - return 1; -} - -static void __cpuinit srat_detect_node(void) -{ -#ifdef CONFIG_NUMA - unsigned node; - int cpu = smp_processor_id(); - int apicid = hard_smp_processor_id(); - - /* Don't do the funky fallback heuristics the AMD version employs - for now. */ - node = apicid_to_node[apicid]; - if (node == NUMA_NO_NODE || !node_online(node)) - node = first_node(node_online_map); - numa_set_node(cpu, node); - - printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); -#endif -} - -static void __cpuinit early_init_intel(struct cpuinfo_x86 *c) -{ - if ((c->x86 == 0xf && c->x86_model >= 0x03) || - (c->x86 == 0x6 && c->x86_model >= 0x0e)) - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); -} - -static void __cpuinit init_intel(struct cpuinfo_x86 *c) +static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) { - /* Cache sizes */ - unsigned n; - - init_intel_cacheinfo(c); - if (c->cpuid_level > 9) { - unsigned eax = cpuid_eax(10); - /* Check for version and the number of counters */ - if ((eax & 0xff) && (((eax>>8) & 0xff) > 1)) - set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON); + char *v = c->x86_vendor_id; + int i; + static int printed; + + for (i = 0; i < X86_VENDOR_NUM; i++) { + if (cpu_devs[i]) { + if (!strcmp(v, cpu_devs[i]->c_ident[0]) || + (cpu_devs[i]->c_ident[1] && + !strcmp(v, cpu_devs[i]->c_ident[1]))) { + c->x86_vendor = i; + this_cpu = cpu_devs[i]; + return; + } + } } - - if (cpu_has_ds) { - unsigned int l1, l2; - rdmsr(MSR_IA32_MISC_ENABLE, l1, l2); - if (!(l1 & (1<<11))) - set_cpu_cap(c, X86_FEATURE_BTS); - if (!(l1 & (1<<12))) - set_cpu_cap(c, X86_FEATURE_PEBS); + if (!printed) { + printed++; + printk(KERN_ERR "CPU: Vendor unknown, using generic init.\n"); + printk(KERN_ERR "CPU: Your system may be unstable.\n"); } - - - if (cpu_has_bts) - ds_init_intel(c); - - n = c->extended_cpuid_level; - if (n >= 0x80000008) { - unsigned eax = cpuid_eax(0x80000008); - c->x86_virt_bits = (eax >> 8) & 0xff; - c->x86_phys_bits = eax & 0xff; - /* CPUID workaround for Intel 0F34 CPU */ - if (c->x86_vendor == X86_VENDOR_INTEL && - c->x86 == 0xF && c->x86_model == 0x3 && - c->x86_mask == 0x4) - c->x86_phys_bits = 36; - } - - if (c->x86 == 15) - c->x86_cache_alignment = c->x86_clflush_size * 2; - if (c->x86 == 6) - set_cpu_cap(c, X86_FEATURE_REP_GOOD); - set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); - c->x86_max_cores = intel_num_cpu_cores(c); - - srat_detect_node(); -} - -static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c) -{ - if (c->x86 == 0x6 && c->x86_model >= 0xf) - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); + c->x86_vendor = X86_VENDOR_UNKNOWN; } -static void __cpuinit init_centaur(struct cpuinfo_x86 *c) +static void __init early_cpu_support_print(void) { - /* Cache sizes */ - unsigned n; + int i,j; + struct cpu_dev *cpu_devx; - n = c->extended_cpuid_level; - if (n >= 0x80000008) { - unsigned eax = cpuid_eax(0x80000008); - c->x86_virt_bits = (eax >> 8) & 0xff; - c->x86_phys_bits = eax & 0xff; - } - - if (c->x86 == 0x6 && c->x86_model >= 0xf) { - c->x86_cache_alignment = c->x86_clflush_size * 2; - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); - set_cpu_cap(c, X86_FEATURE_REP_GOOD); + printk("KERNEL supported cpus:\n"); + for (i = 0; i < X86_VENDOR_NUM; i++) { + cpu_devx = cpu_devs[i]; + if (!cpu_devx) + continue; + for (j = 0; j < 2; j++) { + if (!cpu_devx->c_ident[j]) + continue; + printk(" %s %s\n", cpu_devx->c_vendor, + cpu_devx->c_ident[j]); + } } - set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); } -static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) +static void __init early_cpu_init(void) { - char *v = c->x86_vendor_id; + struct cpu_vendor_dev *cvdev; - if (!strcmp(v, "AuthenticAMD")) - c->x86_vendor = X86_VENDOR_AMD; - else if (!strcmp(v, "GenuineIntel")) - c->x86_vendor = X86_VENDOR_INTEL; - else if (!strcmp(v, "CentaurHauls")) - c->x86_vendor = X86_VENDOR_CENTAUR; - else - c->x86_vendor = X86_VENDOR_UNKNOWN; + for (cvdev = __x86cpuvendor_start ; + cvdev < __x86cpuvendor_end ; + cvdev++) + cpu_devs[cvdev->vendor] = cvdev->cpu_dev; + early_cpu_support_print(); } /* Do some early cpuid on the boot CPU to get some parameter that are @@ -1066,17 +772,9 @@ static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c) if (c->extended_cpuid_level >= 0x80000007) c->x86_power = cpuid_edx(0x80000007); - switch (c->x86_vendor) { - case X86_VENDOR_AMD: - early_init_amd(c); - break; - case X86_VENDOR_INTEL: - early_init_intel(c); - break; - case X86_VENDOR_CENTAUR: - early_init_centaur(c); - break; - } + if (c->x86_vendor != X86_VENDOR_UNKNOWN && + cpu_devs[c->x86_vendor]->c_early_init) + cpu_devs[c->x86_vendor]->c_early_init(c); validate_pat_support(c); } @@ -1104,24 +802,8 @@ void __cpuinit identify_cpu(struct cpuinfo_x86 *c) * At the end of this section, c->x86_capability better * indicate the features this CPU genuinely supports! */ - switch (c->x86_vendor) { - case X86_VENDOR_AMD: - init_amd(c); - break; - - case X86_VENDOR_INTEL: - init_intel(c); - break; - - case X86_VENDOR_CENTAUR: - init_centaur(c); - break; - - case X86_VENDOR_UNKNOWN: - default: - display_cacheinfo(c); - break; - } + if (this_cpu->c_init) + this_cpu->c_init(c); detect_ht(c); diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 38988491c622..f2b666756299 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -59,7 +59,6 @@ #include <asm/pgtable.h> #include <asm/tlbflush.h> #include <asm/mtrr.h> -#include <asm/nmi.h> #include <asm/vmi.h> #include <asm/genapic.h> #include <linux/mc146818rtc.h> @@ -996,7 +995,6 @@ do_rest: #endif cpu_clear(cpu, cpu_callout_map); /* was set by do_boot_cpu() */ cpu_clear(cpu, cpu_initialized); /* was set by cpu_init() */ - cpu_clear(cpu, cpu_possible_map); cpu_clear(cpu, cpu_present_map); per_cpu(x86_cpu_to_apicid, cpu) = BAD_APICID; } @@ -1158,9 +1156,11 @@ static int __init smp_sanity_check(unsigned max_cpus) * If SMP should be disabled, then really disable it! */ if (!max_cpus) { - printk(KERN_INFO "SMP mode deactivated," - "forcing use of dummy APIC emulation.\n"); + printk(KERN_INFO "SMP mode deactivated.\n"); smpboot_clear_io_apic(); + + localise_nmi_watchdog(); + #ifdef CONFIG_X86_32 connect_bsp_APIC(); #endif @@ -1190,6 +1190,7 @@ static void __init smp_cpu_index_default(void) */ void __init native_smp_prepare_cpus(unsigned int max_cpus) { + preempt_disable(); nmi_watchdog_default(); smp_cpu_index_default(); current_cpu_data = boot_cpu_data; @@ -1206,7 +1207,7 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus) if (smp_sanity_check(max_cpus) < 0) { printk(KERN_INFO "SMP disabled\n"); disable_smp(); - return; + goto out; } preempt_disable(); @@ -1246,6 +1247,8 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus) printk(KERN_INFO "CPU%d: ", 0); print_cpu_info(&cpu_data(0)); setup_boot_clock(); +out: + preempt_enable(); } /* * Early setup to make printk work. diff --git a/arch/x86/kernel/sys_i386_32.c b/arch/x86/kernel/sys_i386_32.c index d2ab52cc1d6b..7066cb855a60 100644 --- a/arch/x86/kernel/sys_i386_32.c +++ b/arch/x86/kernel/sys_i386_32.c @@ -19,8 +19,8 @@ #include <linux/utsname.h> #include <linux/ipc.h> -#include <asm/uaccess.h> -#include <asm/unistd.h> +#include <linux/uaccess.h> +#include <linux/unistd.h> asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, @@ -103,7 +103,7 @@ asmlinkage int old_select(struct sel_arg_struct __user *arg) * * This is really horribly ugly. */ -asmlinkage int sys_ipc (uint call, int first, int second, +asmlinkage int sys_ipc(uint call, int first, int second, int third, void __user *ptr, long fifth) { int version, ret; @@ -113,24 +113,24 @@ asmlinkage int sys_ipc (uint call, int first, int second, switch (call) { case SEMOP: - return sys_semtimedop (first, (struct sembuf __user *)ptr, second, NULL); + return sys_semtimedop(first, (struct sembuf __user *)ptr, second, NULL); case SEMTIMEDOP: return sys_semtimedop(first, (struct sembuf __user *)ptr, second, (const struct timespec __user *)fifth); case SEMGET: - return sys_semget (first, second, third); + return sys_semget(first, second, third); case SEMCTL: { union semun fourth; if (!ptr) return -EINVAL; if (get_user(fourth.__pad, (void __user * __user *) ptr)) return -EFAULT; - return sys_semctl (first, second, third, fourth); + return sys_semctl(first, second, third, fourth); } case MSGSND: - return sys_msgsnd (first, (struct msgbuf __user *) ptr, + return sys_msgsnd(first, (struct msgbuf __user *) ptr, second, third); case MSGRCV: switch (version) { @@ -138,45 +138,45 @@ asmlinkage int sys_ipc (uint call, int first, int second, struct ipc_kludge tmp; if (!ptr) return -EINVAL; - + if (copy_from_user(&tmp, - (struct ipc_kludge __user *) ptr, - sizeof (tmp))) + (struct ipc_kludge __user *) ptr, + sizeof(tmp))) return -EFAULT; - return sys_msgrcv (first, tmp.msgp, second, + return sys_msgrcv(first, tmp.msgp, second, tmp.msgtyp, third); } default: - return sys_msgrcv (first, + return sys_msgrcv(first, (struct msgbuf __user *) ptr, second, fifth, third); } case MSGGET: - return sys_msgget ((key_t) first, second); + return sys_msgget((key_t) first, second); case MSGCTL: - return sys_msgctl (first, second, (struct msqid_ds __user *) ptr); + return sys_msgctl(first, second, (struct msqid_ds __user *) ptr); case SHMAT: switch (version) { default: { ulong raddr; - ret = do_shmat (first, (char __user *) ptr, second, &raddr); + ret = do_shmat(first, (char __user *) ptr, second, &raddr); if (ret) return ret; - return put_user (raddr, (ulong __user *) third); + return put_user(raddr, (ulong __user *) third); } case 1: /* iBCS2 emulator entry point */ if (!segment_eq(get_fs(), get_ds())) return -EINVAL; /* The "(ulong *) third" is valid _only_ because of the kernel segment thing */ - return do_shmat (first, (char __user *) ptr, second, (ulong *) third); + return do_shmat(first, (char __user *) ptr, second, (ulong *) third); } - case SHMDT: - return sys_shmdt ((char __user *)ptr); + case SHMDT: + return sys_shmdt((char __user *)ptr); case SHMGET: - return sys_shmget (first, second, third); + return sys_shmget(first, second, third); case SHMCTL: - return sys_shmctl (first, second, + return sys_shmctl(first, second, (struct shmid_ds __user *) ptr); default: return -ENOSYS; @@ -186,28 +186,28 @@ asmlinkage int sys_ipc (uint call, int first, int second, /* * Old cruft */ -asmlinkage int sys_uname(struct old_utsname __user * name) +asmlinkage int sys_uname(struct old_utsname __user *name) { int err; if (!name) return -EFAULT; down_read(&uts_sem); - err = copy_to_user(name, utsname(), sizeof (*name)); + err = copy_to_user(name, utsname(), sizeof(*name)); up_read(&uts_sem); - return err?-EFAULT:0; + return err? -EFAULT:0; } -asmlinkage int sys_olduname(struct oldold_utsname __user * name) +asmlinkage int sys_olduname(struct oldold_utsname __user *name) { int error; if (!name) return -EFAULT; - if (!access_ok(VERIFY_WRITE,name,sizeof(struct oldold_utsname))) + if (!access_ok(VERIFY_WRITE, name, sizeof(struct oldold_utsname))) return -EFAULT; - - down_read(&uts_sem); - + + down_read(&uts_sem); + error = __copy_to_user(&name->sysname, &utsname()->sysname, __OLD_UTS_LEN); error |= __put_user(0, name->sysname + __OLD_UTS_LEN); @@ -223,9 +223,9 @@ asmlinkage int sys_olduname(struct oldold_utsname __user * name) error |= __copy_to_user(&name->machine, &utsname()->machine, __OLD_UTS_LEN); error |= __put_user(0, name->machine + __OLD_UTS_LEN); - + up_read(&uts_sem); - + error = error ? -EFAULT : 0; return error; @@ -241,6 +241,6 @@ int kernel_execve(const char *filename, char *const argv[], char *const envp[]) long __res; asm volatile ("push %%ebx ; movl %2,%%ebx ; int $0x80 ; pop %%ebx" : "=a" (__res) - : "0" (__NR_execve),"ri" (filename),"c" (argv), "d" (envp) : "memory"); + : "0" (__NR_execve), "ri" (filename), "c" (argv), "d" (envp) : "memory"); return __res; } diff --git a/arch/x86/kernel/time_32.c b/arch/x86/kernel/time_32.c index 2ff21f398934..5f29f12da50c 100644 --- a/arch/x86/kernel/time_32.c +++ b/arch/x86/kernel/time_32.c @@ -84,8 +84,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id) if (timer_ack) { /* * Subtle, when I/O APICs are used we have to ack timer IRQ - * manually to reset the IRR bit for do_slow_gettimeoffset(). - * This will also deassert NMI lines for the watchdog if run + * manually to deassert NMI lines for the watchdog if run * on an 82489DX-based system. */ spin_lock(&i8259A_lock); diff --git a/arch/x86/kernel/traps_32.c b/arch/x86/kernel/traps_32.c index bde6f63e15d5..08d752de4eee 100644 --- a/arch/x86/kernel/traps_32.c +++ b/arch/x86/kernel/traps_32.c @@ -544,6 +544,7 @@ vm86_trap: #define DO_ERROR(trapnr, signr, str, name) \ void do_##name(struct pt_regs *regs, long error_code) \ { \ + trace_hardirqs_fixup(); \ if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ == NOTIFY_STOP) \ return; \ diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c index adff76ea97c4..ec6d3b2130c4 100644 --- a/arch/x86/kernel/traps_64.c +++ b/arch/x86/kernel/traps_64.c @@ -71,7 +71,6 @@ asmlinkage void general_protection(void); asmlinkage void page_fault(void); asmlinkage void coprocessor_error(void); asmlinkage void simd_coprocessor_error(void); -asmlinkage void reserved(void); asmlinkage void alignment_check(void); asmlinkage void machine_check(void); asmlinkage void spurious_interrupt_bug(void); @@ -702,12 +701,10 @@ DO_ERROR_INFO( 0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->ip) DO_ERROR( 4, SIGSEGV, "overflow", overflow) DO_ERROR( 5, SIGSEGV, "bounds", bounds) DO_ERROR_INFO( 6, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip) -DO_ERROR( 7, SIGSEGV, "device not available", device_not_available) DO_ERROR( 9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun) DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS) DO_ERROR(11, SIGBUS, "segment not present", segment_not_present) DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0) -DO_ERROR(18, SIGSEGV, "reserved", reserved) /* Runs on IST stack */ asmlinkage void do_stack_segment(struct pt_regs *regs, long error_code) diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c index e4790728b224..774a5a83c296 100644 --- a/arch/x86/kernel/tsc_32.c +++ b/arch/x86/kernel/tsc_32.c @@ -14,7 +14,10 @@ #include "mach_timer.h" -static int tsc_enabled; +/* native_sched_clock() is called before tsc_init(), so + we must start with the TSC soft disabled to prevent + erroneous rdtsc usage on !cpu_has_tsc processors */ +static int tsc_disabled = -1; /* * On some systems the TSC frequency does not @@ -28,8 +31,8 @@ EXPORT_SYMBOL_GPL(tsc_khz); static int __init tsc_setup(char *str) { printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, " - "cannot disable TSC completely.\n"); - mark_tsc_unstable("user disabled TSC"); + "cannot disable TSC completely.\n"); + tsc_disabled = 1; return 1; } #else @@ -120,7 +123,7 @@ unsigned long long native_sched_clock(void) * very important for it to be as fast as the platform * can achive it. ) */ - if (unlikely(!tsc_enabled && !tsc_unstable)) + if (unlikely(tsc_disabled)) /* No locking but a rare wrong value is not a big deal: */ return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ); @@ -283,7 +286,6 @@ core_initcall(cpufreq_tsc); /* clock source code */ -static unsigned long current_tsc_khz; static struct clocksource clocksource_tsc; /* @@ -322,7 +324,6 @@ void mark_tsc_unstable(char *reason) { if (!tsc_unstable) { tsc_unstable = 1; - tsc_enabled = 0; printk("Marking TSC unstable due to: %s.\n", reason); /* Can be called before registration */ if (clocksource_tsc.mult) @@ -336,7 +337,7 @@ EXPORT_SYMBOL_GPL(mark_tsc_unstable); static int __init dmi_mark_tsc_unstable(const struct dmi_system_id *d) { printk(KERN_NOTICE "%s detected: marking TSC unstable.\n", - d->ident); + d->ident); tsc_unstable = 1; return 0; } @@ -403,7 +404,7 @@ void __init tsc_init(void) { int cpu; - if (!cpu_has_tsc) + if (!cpu_has_tsc || tsc_disabled > 0) return; cpu_khz = calculate_cpu_khz(); @@ -414,6 +415,9 @@ void __init tsc_init(void) return; } + /* now allow native_sched_clock() to use rdtsc */ + tsc_disabled = 0; + printk("Detected %lu.%03lu MHz processor.\n", (unsigned long)cpu_khz / 1000, (unsigned long)cpu_khz % 1000); @@ -434,15 +438,12 @@ void __init tsc_init(void) unsynchronized_tsc(); check_geode_tsc_reliable(); - current_tsc_khz = tsc_khz; - clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz, - clocksource_tsc.shift); + clocksource_tsc.mult = clocksource_khz2mult(tsc_khz, + clocksource_tsc.shift); /* lower the rating if we already know its unstable: */ if (check_tsc_unstable()) { clocksource_tsc.rating = 0; clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS; - } else - tsc_enabled = 1; - + } clocksource_register(&clocksource_tsc); } diff --git a/arch/x86/kernel/tsc_64.c b/arch/x86/kernel/tsc_64.c index fcc16e58609e..9898fb01edfd 100644 --- a/arch/x86/kernel/tsc_64.c +++ b/arch/x86/kernel/tsc_64.c @@ -227,14 +227,14 @@ void __init tsc_calibrate(void) /* hpet or pmtimer available ? */ if (!hpet && !pm1 && !pm2) { printk(KERN_INFO "TSC calibrated against PIT\n"); - return; + goto out; } /* Check, whether the sampling was disturbed by an SMI */ if (tsc1 == ULONG_MAX || tsc2 == ULONG_MAX) { printk(KERN_WARNING "TSC calibration disturbed by SMI, " "using PIT calibration result\n"); - return; + goto out; } tsc2 = (tsc2 - tsc1) * 1000000L; @@ -242,7 +242,7 @@ void __init tsc_calibrate(void) if (hpet) { printk(KERN_INFO "TSC calibrated against HPET\n"); if (hpet2 < hpet1) - hpet2 += 0x100000000; + hpet2 += 0x100000000UL; hpet2 -= hpet1; tsc1 = (hpet2 * hpet_readl(HPET_PERIOD)) / 1000000; } else { @@ -255,6 +255,7 @@ void __init tsc_calibrate(void) tsc_khz = tsc2 / tsc1; +out: for_each_possible_cpu(cpu) set_cyc2ns_scale(tsc_khz, cpu); } diff --git a/arch/x86/kernel/vmlinux_32.lds.S b/arch/x86/kernel/vmlinux_32.lds.S index ce5ed083a1e9..2674f5796275 100644 --- a/arch/x86/kernel/vmlinux_32.lds.S +++ b/arch/x86/kernel/vmlinux_32.lds.S @@ -60,13 +60,6 @@ SECTIONS BUG_TABLE :text - . = ALIGN(4); - .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { - __tracedata_start = .; - *(.tracedata) - __tracedata_end = .; - } - RODATA /* writeable */ diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S index fad3674b06a5..fd246e22fe6b 100644 --- a/arch/x86/kernel/vmlinux_64.lds.S +++ b/arch/x86/kernel/vmlinux_64.lds.S @@ -53,13 +53,6 @@ SECTIONS RODATA - . = ALIGN(4); - .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { - __tracedata_start = .; - *(.tracedata) - __tracedata_end = .; - } - . = ALIGN(PAGE_SIZE); /* Align data segment to page size boundary */ /* Data */ .data : AT(ADDR(.data) - LOAD_OFFSET) { @@ -177,6 +170,7 @@ SECTIONS *(.con_initcall.init) } __con_initcall_end = .; + . = ALIGN(16); __x86cpuvendor_start = .; .x86cpuvendor.init : AT(ADDR(.x86cpuvendor.init) - LOAD_OFFSET) { *(.x86cpuvendor.init) diff --git a/arch/x86/kernel/vsmp_64.c b/arch/x86/kernel/vsmp_64.c index ba8c0b75ab0a..0c029e8959c7 100644 --- a/arch/x86/kernel/vsmp_64.c +++ b/arch/x86/kernel/vsmp_64.c @@ -15,9 +15,12 @@ #include <linux/init.h> #include <linux/pci_ids.h> #include <linux/pci_regs.h> + +#include <asm/apic.h> #include <asm/pci-direct.h> #include <asm/io.h> #include <asm/paravirt.h> +#include <asm/setup.h> #if defined CONFIG_PCI && defined CONFIG_PARAVIRT /* |