diff options
Diffstat (limited to 'arch/x86/math-emu/reg_u_div.S')
| -rw-r--r-- | arch/x86/math-emu/reg_u_div.S | 471 |
1 files changed, 471 insertions, 0 deletions
diff --git a/arch/x86/math-emu/reg_u_div.S b/arch/x86/math-emu/reg_u_div.S new file mode 100644 index 000000000000..cc00654b6f9a --- /dev/null +++ b/arch/x86/math-emu/reg_u_div.S @@ -0,0 +1,471 @@ + .file "reg_u_div.S" +/*---------------------------------------------------------------------------+ + | reg_u_div.S | + | | + | Divide one FPU_REG by another and put the result in a destination FPU_REG.| + | | + | Copyright (C) 1992,1993,1995,1997 | + | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia | + | E-mail billm@suburbia.net | + | | + | | + +---------------------------------------------------------------------------*/ + +/*---------------------------------------------------------------------------+ + | Call from C as: | + | int FPU_u_div(FPU_REG *a, FPU_REG *b, FPU_REG *dest, | + | unsigned int control_word, char *sign) | + | | + | Does not compute the destination exponent, but does adjust it. | + | | + | Return value is the tag of the answer, or-ed with FPU_Exception if | + | one was raised, or -1 on internal error. | + +---------------------------------------------------------------------------*/ + +#include "exception.h" +#include "fpu_emu.h" +#include "control_w.h" + + +/* #define dSIGL(x) (x) */ +/* #define dSIGH(x) 4(x) */ + + +#ifndef NON_REENTRANT_FPU +/* + Local storage on the stack: + Result: FPU_accum_3:FPU_accum_2:FPU_accum_1:FPU_accum_0 + Overflow flag: ovfl_flag + */ +#define FPU_accum_3 -4(%ebp) +#define FPU_accum_2 -8(%ebp) +#define FPU_accum_1 -12(%ebp) +#define FPU_accum_0 -16(%ebp) +#define FPU_result_1 -20(%ebp) +#define FPU_result_2 -24(%ebp) +#define FPU_ovfl_flag -28(%ebp) + +#else +.data +/* + Local storage in a static area: + Result: FPU_accum_3:FPU_accum_2:FPU_accum_1:FPU_accum_0 + Overflow flag: ovfl_flag + */ + .align 4,0 +FPU_accum_3: + .long 0 +FPU_accum_2: + .long 0 +FPU_accum_1: + .long 0 +FPU_accum_0: + .long 0 +FPU_result_1: + .long 0 +FPU_result_2: + .long 0 +FPU_ovfl_flag: + .byte 0 +#endif /* NON_REENTRANT_FPU */ + +#define REGA PARAM1 +#define REGB PARAM2 +#define DEST PARAM3 + +.text +ENTRY(FPU_u_div) + pushl %ebp + movl %esp,%ebp +#ifndef NON_REENTRANT_FPU + subl $28,%esp +#endif /* NON_REENTRANT_FPU */ + + pushl %esi + pushl %edi + pushl %ebx + + movl REGA,%esi + movl REGB,%ebx + movl DEST,%edi + + movswl EXP(%esi),%edx + movswl EXP(%ebx),%eax + subl %eax,%edx + addl EXP_BIAS,%edx + + /* A denormal and a large number can cause an exponent underflow */ + cmpl EXP_WAY_UNDER,%edx + jg xExp_not_underflow + + /* Set to a really low value allow correct handling */ + movl EXP_WAY_UNDER,%edx + +xExp_not_underflow: + + movw %dx,EXP(%edi) + +#ifdef PARANOID +/* testl $0x80000000, SIGH(%esi) // Dividend */ +/* je L_bugged */ + testl $0x80000000, SIGH(%ebx) /* Divisor */ + je L_bugged +#endif /* PARANOID */ + +/* Check if the divisor can be treated as having just 32 bits */ + cmpl $0,SIGL(%ebx) + jnz L_Full_Division /* Can't do a quick divide */ + +/* We should be able to zip through the division here */ + movl SIGH(%ebx),%ecx /* The divisor */ + movl SIGH(%esi),%edx /* Dividend */ + movl SIGL(%esi),%eax /* Dividend */ + + cmpl %ecx,%edx + setaeb FPU_ovfl_flag /* Keep a record */ + jb L_no_adjust + + subl %ecx,%edx /* Prevent the overflow */ + +L_no_adjust: + /* Divide the 64 bit number by the 32 bit denominator */ + divl %ecx + movl %eax,FPU_result_2 + + /* Work on the remainder of the first division */ + xorl %eax,%eax + divl %ecx + movl %eax,FPU_result_1 + + /* Work on the remainder of the 64 bit division */ + xorl %eax,%eax + divl %ecx + + testb $255,FPU_ovfl_flag /* was the num > denom ? */ + je L_no_overflow + + /* Do the shifting here */ + /* increase the exponent */ + incw EXP(%edi) + + /* shift the mantissa right one bit */ + stc /* To set the ms bit */ + rcrl FPU_result_2 + rcrl FPU_result_1 + rcrl %eax + +L_no_overflow: + jmp LRound_precision /* Do the rounding as required */ + + +/*---------------------------------------------------------------------------+ + | Divide: Return arg1/arg2 to arg3. | + | | + | This routine does not use the exponents of arg1 and arg2, but does | + | adjust the exponent of arg3. | + | | + | The maximum returned value is (ignoring exponents) | + | .ffffffff ffffffff | + | ------------------ = 1.ffffffff fffffffe | + | .80000000 00000000 | + | and the minimum is | + | .80000000 00000000 | + | ------------------ = .80000000 00000001 (rounded) | + | .ffffffff ffffffff | + | | + +---------------------------------------------------------------------------*/ + + +L_Full_Division: + /* Save extended dividend in local register */ + movl SIGL(%esi),%eax + movl %eax,FPU_accum_2 + movl SIGH(%esi),%eax + movl %eax,FPU_accum_3 + xorl %eax,%eax + movl %eax,FPU_accum_1 /* zero the extension */ + movl %eax,FPU_accum_0 /* zero the extension */ + + movl SIGL(%esi),%eax /* Get the current num */ + movl SIGH(%esi),%edx + +/*----------------------------------------------------------------------*/ +/* Initialization done. + Do the first 32 bits. */ + + movb $0,FPU_ovfl_flag + cmpl SIGH(%ebx),%edx /* Test for imminent overflow */ + jb LLess_than_1 + ja LGreater_than_1 + + cmpl SIGL(%ebx),%eax + jb LLess_than_1 + +LGreater_than_1: +/* The dividend is greater or equal, would cause overflow */ + setaeb FPU_ovfl_flag /* Keep a record */ + + subl SIGL(%ebx),%eax + sbbl SIGH(%ebx),%edx /* Prevent the overflow */ + movl %eax,FPU_accum_2 + movl %edx,FPU_accum_3 + +LLess_than_1: +/* At this point, we have a dividend < divisor, with a record of + adjustment in FPU_ovfl_flag */ + + /* We will divide by a number which is too large */ + movl SIGH(%ebx),%ecx + addl $1,%ecx + jnc LFirst_div_not_1 + + /* here we need to divide by 100000000h, + i.e., no division at all.. */ + mov %edx,%eax + jmp LFirst_div_done + +LFirst_div_not_1: + divl %ecx /* Divide the numerator by the augmented + denom ms dw */ + +LFirst_div_done: + movl %eax,FPU_result_2 /* Put the result in the answer */ + + mull SIGH(%ebx) /* mul by the ms dw of the denom */ + + subl %eax,FPU_accum_2 /* Subtract from the num local reg */ + sbbl %edx,FPU_accum_3 + + movl FPU_result_2,%eax /* Get the result back */ + mull SIGL(%ebx) /* now mul the ls dw of the denom */ + + subl %eax,FPU_accum_1 /* Subtract from the num local reg */ + sbbl %edx,FPU_accum_2 + sbbl $0,FPU_accum_3 + je LDo_2nd_32_bits /* Must check for non-zero result here */ + +#ifdef PARANOID + jb L_bugged_1 +#endif /* PARANOID */ + + /* need to subtract another once of the denom */ + incl FPU_result_2 /* Correct the answer */ + + movl SIGL(%ebx),%eax + movl SIGH(%ebx),%edx + subl %eax,FPU_accum_1 /* Subtract from the num local reg */ + sbbl %edx,FPU_accum_2 + +#ifdef PARANOID + sbbl $0,FPU_accum_3 + jne L_bugged_1 /* Must check for non-zero result here */ +#endif /* PARANOID */ + +/*----------------------------------------------------------------------*/ +/* Half of the main problem is done, there is just a reduced numerator + to handle now. + Work with the second 32 bits, FPU_accum_0 not used from now on */ +LDo_2nd_32_bits: + movl FPU_accum_2,%edx /* get the reduced num */ + movl FPU_accum_1,%eax + + /* need to check for possible subsequent overflow */ + cmpl SIGH(%ebx),%edx + jb LDo_2nd_div + ja LPrevent_2nd_overflow + + cmpl SIGL(%ebx),%eax + jb LDo_2nd_div + +LPrevent_2nd_overflow: +/* The numerator is greater or equal, would cause overflow */ + /* prevent overflow */ + subl SIGL(%ebx),%eax + sbbl SIGH(%ebx),%edx + movl %edx,FPU_accum_2 + movl %eax,FPU_accum_1 + + incl FPU_result_2 /* Reflect the subtraction in the answer */ + +#ifdef PARANOID + je L_bugged_2 /* Can't bump the result to 1.0 */ +#endif /* PARANOID */ + +LDo_2nd_div: + cmpl $0,%ecx /* augmented denom msw */ + jnz LSecond_div_not_1 + + /* %ecx == 0, we are dividing by 1.0 */ + mov %edx,%eax + jmp LSecond_div_done + +LSecond_div_not_1: + divl %ecx /* Divide the numerator by the denom ms dw */ + +LSecond_div_done: + movl %eax,FPU_result_1 /* Put the result in the answer */ + + mull SIGH(%ebx) /* mul by the ms dw of the denom */ + + subl %eax,FPU_accum_1 /* Subtract from the num local reg */ + sbbl %edx,FPU_accum_2 + +#ifdef PARANOID + jc L_bugged_2 +#endif /* PARANOID */ + + movl FPU_result_1,%eax /* Get the result back */ + mull SIGL(%ebx) /* now mul the ls dw of the denom */ + + subl %eax,FPU_accum_0 /* Subtract from the num local reg */ + sbbl %edx,FPU_accum_1 /* Subtract from the num local reg */ + sbbl $0,FPU_accum_2 + +#ifdef PARANOID + jc L_bugged_2 +#endif /* PARANOID */ + + jz LDo_3rd_32_bits + +#ifdef PARANOID + cmpl $1,FPU_accum_2 + jne L_bugged_2 +#endif /* PARANOID */ + + /* need to subtract another once of the denom */ + movl SIGL(%ebx),%eax + movl SIGH(%ebx),%edx + subl %eax,FPU_accum_0 /* Subtract from the num local reg */ + sbbl %edx,FPU_accum_1 + sbbl $0,FPU_accum_2 + +#ifdef PARANOID + jc L_bugged_2 + jne L_bugged_2 +#endif /* PARANOID */ + + addl $1,FPU_result_1 /* Correct the answer */ + adcl $0,FPU_result_2 + +#ifdef PARANOID + jc L_bugged_2 /* Must check for non-zero result here */ +#endif /* PARANOID */ + +/*----------------------------------------------------------------------*/ +/* The division is essentially finished here, we just need to perform + tidying operations. + Deal with the 3rd 32 bits */ +LDo_3rd_32_bits: + movl FPU_accum_1,%edx /* get the reduced num */ + movl FPU_accum_0,%eax + + /* need to check for possible subsequent overflow */ + cmpl SIGH(%ebx),%edx /* denom */ + jb LRound_prep + ja LPrevent_3rd_overflow + + cmpl SIGL(%ebx),%eax /* denom */ + jb LRound_prep + +LPrevent_3rd_overflow: + /* prevent overflow */ + subl SIGL(%ebx),%eax + sbbl SIGH(%ebx),%edx + movl %edx,FPU_accum_1 + movl %eax,FPU_accum_0 + + addl $1,FPU_result_1 /* Reflect the subtraction in the answer */ + adcl $0,FPU_result_2 + jne LRound_prep + jnc LRound_prep + + /* This is a tricky spot, there is an overflow of the answer */ + movb $255,FPU_ovfl_flag /* Overflow -> 1.000 */ + +LRound_prep: +/* + * Prepare for rounding. + * To test for rounding, we just need to compare 2*accum with the + * denom. + */ + movl FPU_accum_0,%ecx + movl FPU_accum_1,%edx + movl %ecx,%eax + orl %edx,%eax + jz LRound_ovfl /* The accumulator contains zero. */ + + /* Multiply by 2 */ + clc + rcll $1,%ecx + rcll $1,%edx + jc LRound_large /* No need to compare, denom smaller */ + + subl SIGL(%ebx),%ecx + sbbl SIGH(%ebx),%edx + jnc LRound_not_small + + movl $0x70000000,%eax /* Denom was larger */ + jmp LRound_ovfl + +LRound_not_small: + jnz LRound_large + + movl $0x80000000,%eax /* Remainder was exactly 1/2 denom */ + jmp LRound_ovfl + +LRound_large: + movl $0xff000000,%eax /* Denom was smaller */ + +LRound_ovfl: +/* We are now ready to deal with rounding, but first we must get + the bits properly aligned */ + testb $255,FPU_ovfl_flag /* was the num > denom ? */ + je LRound_precision + + incw EXP(%edi) + + /* shift the mantissa right one bit */ + stc /* Will set the ms bit */ + rcrl FPU_result_2 + rcrl FPU_result_1 + rcrl %eax + +/* Round the result as required */ +LRound_precision: + decw EXP(%edi) /* binary point between 1st & 2nd bits */ + + movl %eax,%edx + movl FPU_result_1,%ebx + movl FPU_result_2,%eax + jmp fpu_reg_round + + +#ifdef PARANOID +/* The logic is wrong if we got here */ +L_bugged: + pushl EX_INTERNAL|0x202 + call EXCEPTION + pop %ebx + jmp L_exit + +L_bugged_1: + pushl EX_INTERNAL|0x203 + call EXCEPTION + pop %ebx + jmp L_exit + +L_bugged_2: + pushl EX_INTERNAL|0x204 + call EXCEPTION + pop %ebx + jmp L_exit + +L_exit: + movl $-1,%eax + popl %ebx + popl %edi + popl %esi + + leave + ret +#endif /* PARANOID */ |