1 files changed, 145 insertions, 53 deletions

diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 5a760fd66bec..7cad01af6dcd 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -6,16 +6,17 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/cpu.h>
+#include <linux/debugfs.h>
 
 #include <asm/tlbflush.h>
 #include <asm/mmu_context.h>
 #include <asm/cache.h>
 #include <asm/apic.h>
 #include <asm/uv/uv.h>
-#include <linux/debugfs.h>
+#include <asm/kaiser.h>
 
 /*
- *	Smarter SMP flushing macros.
+ *	TLB flushing, formerly SMP-only
  *		c/o Linus Torvalds.
  *
  *	These mean you can really definitely utterly forget about
@@ -34,6 +35,36 @@ struct flush_tlb_info {
 	unsigned long flush_end;
 };
 
+static void load_new_mm_cr3(pgd_t *pgdir)
+{
+	unsigned long new_mm_cr3 = __pa(pgdir);
+
+	if (kaiser_enabled) {
+		/*
+		 * We reuse the same PCID for different tasks, so we must
+		 * flush all the entries for the PCID out when we change tasks.
+		 * Flush KERN below, flush USER when returning to userspace in
+		 * kaiser's SWITCH_USER_CR3 (_SWITCH_TO_USER_CR3) macro.
+		 *
+		 * invpcid_flush_single_context(X86_CR3_PCID_ASID_USER) could
+		 * do it here, but can only be used if X86_FEATURE_INVPCID is
+		 * available - and many machines support pcid without invpcid.
+		 *
+		 * If X86_CR3_PCID_KERN_FLUSH actually added something, then it
+		 * would be needed in the write_cr3() below - if PCIDs enabled.
+		 */
+		BUILD_BUG_ON(X86_CR3_PCID_KERN_FLUSH);
+		kaiser_flush_tlb_on_return_to_user();
+	}
+
+	/*
+	 * Caution: many callers of this function expect
+	 * that load_cr3() is serializing and orders TLB
+	 * fills with respect to the mm_cpumask writes.
+	 */
+	write_cr3(new_mm_cr3);
+}
+
 /*
  * We cannot call mmdrop() because we are in interrupt context,
  * instead update mm->cpu_vm_mask.
@@ -45,7 +76,7 @@ void leave_mm(int cpu)
 		BUG();
 	if (cpumask_test_cpu(cpu, mm_cpumask(active_mm))) {
 		cpumask_clear_cpu(cpu, mm_cpumask(active_mm));
-		load_cr3(swapper_pg_dir);
+		load_new_mm_cr3(swapper_pg_dir);
 		/*
 		 * This gets called in the idle path where RCU
 		 * functions differently.  Tracing normally
@@ -57,6 +88,109 @@ void leave_mm(int cpu)
 }
 EXPORT_SYMBOL_GPL(leave_mm);
 
+void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+	       struct task_struct *tsk)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	switch_mm_irqs_off(prev, next, tsk);
+	local_irq_restore(flags);
+}
+
+void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
+			struct task_struct *tsk)
+{
+	unsigned cpu = smp_processor_id();
+
+	if (likely(prev != next)) {
+		this_cpu_write(cpu_tlbstate.state, TLBSTATE_OK);
+		this_cpu_write(cpu_tlbstate.active_mm, next);
+		cpumask_set_cpu(cpu, mm_cpumask(next));
+
+		/*
+		 * Re-load page tables.
+		 *
+		 * This logic has an ordering constraint:
+		 *
+		 *  CPU 0: Write to a PTE for 'next'
+		 *  CPU 0: load bit 1 in mm_cpumask.  if nonzero, send IPI.
+		 *  CPU 1: set bit 1 in next's mm_cpumask
+		 *  CPU 1: load from the PTE that CPU 0 writes (implicit)
+		 *
+		 * We need to prevent an outcome in which CPU 1 observes
+		 * the new PTE value and CPU 0 observes bit 1 clear in
+		 * mm_cpumask.  (If that occurs, then the IPI will never
+		 * be sent, and CPU 0's TLB will contain a stale entry.)
+		 *
+		 * The bad outcome can occur if either CPU's load is
+		 * reordered before that CPU's store, so both CPUs must
+		 * execute full barriers to prevent this from happening.
+		 *
+		 * Thus, switch_mm needs a full barrier between the
+		 * store to mm_cpumask and any operation that could load
+		 * from next->pgd.  TLB fills are special and can happen
+		 * due to instruction fetches or for no reason at all,
+		 * and neither LOCK nor MFENCE orders them.
+		 * Fortunately, load_cr3() is serializing and gives the
+		 * ordering guarantee we need.
+		 *
+		 */
+		load_new_mm_cr3(next->pgd);
+
+		trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
+
+		/* Stop flush ipis for the previous mm */
+		cpumask_clear_cpu(cpu, mm_cpumask(prev));
+
+		/* Load per-mm CR4 state */
+		load_mm_cr4(next);
+
+#ifdef CONFIG_MODIFY_LDT_SYSCALL
+		/*
+		 * Load the LDT, if the LDT is different.
+		 *
+		 * It's possible that prev->context.ldt doesn't match
+		 * the LDT register.  This can happen if leave_mm(prev)
+		 * was called and then modify_ldt changed
+		 * prev->context.ldt but suppressed an IPI to this CPU.
+		 * In this case, prev->context.ldt != NULL, because we
+		 * never set context.ldt to NULL while the mm still
+		 * exists.  That means that next->context.ldt !=
+		 * prev->context.ldt, because mms never share an LDT.
+		 */
+		if (unlikely(prev->context.ldt != next->context.ldt))
+			load_mm_ldt(next);
+#endif
+	} else {
+		this_cpu_write(cpu_tlbstate.state, TLBSTATE_OK);
+		BUG_ON(this_cpu_read(cpu_tlbstate.active_mm) != next);
+
+		if (!cpumask_test_cpu(cpu, mm_cpumask(next))) {
+			/*
+			 * On established mms, the mm_cpumask is only changed
+			 * from irq context, from ptep_clear_flush() while in
+			 * lazy tlb mode, and here. Irqs are blocked during
+			 * schedule, protecting us from simultaneous changes.
+			 */
+			cpumask_set_cpu(cpu, mm_cpumask(next));
+
+			/*
+			 * We were in lazy tlb mode and leave_mm disabled
+			 * tlb flush IPI delivery. We must reload CR3
+			 * to make sure to use no freed page tables.
+			 *
+			 * As above, load_cr3() is serializing and orders TLB
+			 * fills with respect to the mm_cpumask write.
+			 */
+			load_new_mm_cr3(next->pgd);
+			trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
+			load_mm_cr4(next);
+			load_mm_ldt(next);
+		}
+	}
+}
+
 /*
  * The flush IPI assumes that a thread switch happens in this order:
  * [cpu0: the cpu that switches]
@@ -104,7 +238,7 @@ static void flush_tlb_func(void *info)
 
 	inc_irq_stat(irq_tlb_count);
 
-	if (f->flush_mm != this_cpu_read(cpu_tlbstate.active_mm))
+	if (f->flush_mm && f->flush_mm != this_cpu_read(cpu_tlbstate.active_mm))
 		return;
 
 	count_vm_tlb_event(NR_TLB_REMOTE_FLUSH_RECEIVED);
@@ -158,23 +292,6 @@ void native_flush_tlb_others(const struct cpumask *cpumask,
 	smp_call_function_many(cpumask, flush_tlb_func, &info, 1);
 }
 
-void flush_tlb_current_task(void)
-{
-	struct mm_struct *mm = current->mm;
-
-	preempt_disable();
-
-	count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
-
-	/* This is an implicit full barrier that synchronizes with switch_mm. */
-	local_flush_tlb();
-
-	trace_tlb_flush(TLB_LOCAL_SHOOTDOWN, TLB_FLUSH_ALL);
-	if (cpumask_any_but(mm_cpumask(mm), smp_processor_id()) < nr_cpu_ids)
-		flush_tlb_others(mm_cpumask(mm), mm, 0UL, TLB_FLUSH_ALL);
-	preempt_enable();
-}
-
 /*
  * See Documentation/x86/tlb.txt for details.  We choose 33
  * because it is large enough to cover the vast majority (at
@@ -195,6 +312,12 @@ void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start,
 	unsigned long base_pages_to_flush = TLB_FLUSH_ALL;
 
 	preempt_disable();
+
+	if ((end != TLB_FLUSH_ALL) && !(vmflag & VM_HUGETLB))
+		base_pages_to_flush = (end - start) >> PAGE_SHIFT;
+	if (base_pages_to_flush > tlb_single_page_flush_ceiling)
+		base_pages_to_flush = TLB_FLUSH_ALL;
+
 	if (current->active_mm != mm) {
 		/* Synchronize with switch_mm. */
 		smp_mb();
@@ -211,15 +334,11 @@ void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start,
 		goto out;
 	}
 
-	if ((end != TLB_FLUSH_ALL) && !(vmflag & VM_HUGETLB))
-		base_pages_to_flush = (end - start) >> PAGE_SHIFT;
-
 	/*
 	 * Both branches below are implicit full barriers (MOV to CR or
 	 * INVLPG) that synchronize with switch_mm.
 	 */
-	if (base_pages_to_flush > tlb_single_page_flush_ceiling) {
-		base_pages_to_flush = TLB_FLUSH_ALL;
+	if (base_pages_to_flush == TLB_FLUSH_ALL) {
 		count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
 		local_flush_tlb();
 	} else {
@@ -240,33 +359,6 @@ out:
 	preempt_enable();
 }
 
-void flush_tlb_page(struct vm_area_struct *vma, unsigned long start)
-{
-	struct mm_struct *mm = vma->vm_mm;
-
-	preempt_disable();
-
-	if (current->active_mm == mm) {
-		if (current->mm) {
-			/*
-			 * Implicit full barrier (INVLPG) that synchronizes
-			 * with switch_mm.
-			 */
-			__flush_tlb_one(start);
-		} else {
-			leave_mm(smp_processor_id());
-
-			/* Synchronize with switch_mm. */
-			smp_mb();
-		}
-	}
-
-	if (cpumask_any_but(mm_cpumask(mm), smp_processor_id()) < nr_cpu_ids)
-		flush_tlb_others(mm_cpumask(mm), mm, start, start + PAGE_SIZE);
-
-	preempt_enable();
-}
-
 static void do_flush_tlb_all(void *info)
 {
 	count_vm_tlb_event(NR_TLB_REMOTE_FLUSH_RECEIVED);