diff options
Diffstat (limited to 'arch/x86/pci')
-rw-r--r-- | arch/x86/pci/Makefile | 3 | ||||
-rw-r--r-- | arch/x86/pci/acpi.c | 59 | ||||
-rw-r--r-- | arch/x86/pci/amd_bus.c | 10 | ||||
-rw-r--r-- | arch/x86/pci/bus_numa.c | 13 | ||||
-rw-r--r-- | arch/x86/pci/common.c | 133 | ||||
-rw-r--r-- | arch/x86/pci/fixup.c | 24 | ||||
-rw-r--r-- | arch/x86/pci/irq.c | 6 | ||||
-rw-r--r-- | arch/x86/pci/legacy.c | 4 | ||||
-rw-r--r-- | arch/x86/pci/numaq_32.c | 165 | ||||
-rw-r--r-- | arch/x86/pci/visws.c | 87 |
10 files changed, 60 insertions, 444 deletions
diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile index e063eed0f912..5c6fc3577a49 100644 --- a/arch/x86/pci/Makefile +++ b/arch/x86/pci/Makefile @@ -13,9 +13,6 @@ obj-y += legacy.o irq.o obj-$(CONFIG_STA2X11) += sta2x11-fixup.o -obj-$(CONFIG_X86_VISWS) += visws.o - -obj-$(CONFIG_X86_NUMAQ) += numaq_32.o obj-$(CONFIG_X86_NUMACHIP) += numachip.o obj-$(CONFIG_X86_INTEL_MID) += intel_mid_pci.o diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index 4f25ec077552..01edac6c5e18 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -218,9 +218,8 @@ static void teardown_mcfg_map(struct pci_root_info *info) } #endif -static acpi_status -resource_to_addr(struct acpi_resource *resource, - struct acpi_resource_address64 *addr) +static acpi_status resource_to_addr(struct acpi_resource *resource, + struct acpi_resource_address64 *addr) { acpi_status status; struct acpi_resource_memory24 *memory24; @@ -265,8 +264,7 @@ resource_to_addr(struct acpi_resource *resource, return AE_ERROR; } -static acpi_status -count_resource(struct acpi_resource *acpi_res, void *data) +static acpi_status count_resource(struct acpi_resource *acpi_res, void *data) { struct pci_root_info *info = data; struct acpi_resource_address64 addr; @@ -278,8 +276,7 @@ count_resource(struct acpi_resource *acpi_res, void *data) return AE_OK; } -static acpi_status -setup_resource(struct acpi_resource *acpi_res, void *data) +static acpi_status setup_resource(struct acpi_resource *acpi_res, void *data) { struct pci_root_info *info = data; struct resource *res; @@ -435,9 +432,9 @@ static void release_pci_root_info(struct pci_host_bridge *bridge) __release_pci_root_info(info); } -static void -probe_pci_root_info(struct pci_root_info *info, struct acpi_device *device, - int busnum, int domain) +static void probe_pci_root_info(struct pci_root_info *info, + struct acpi_device *device, + int busnum, int domain) { size_t size; @@ -473,16 +470,13 @@ probe_pci_root_info(struct pci_root_info *info, struct acpi_device *device, struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root) { struct acpi_device *device = root->device; - struct pci_root_info *info = NULL; + struct pci_root_info *info; int domain = root->segment; int busnum = root->secondary.start; LIST_HEAD(resources); - struct pci_bus *bus = NULL; + struct pci_bus *bus; struct pci_sysdata *sd; int node; -#ifdef CONFIG_ACPI_NUMA - int pxm; -#endif if (pci_ignore_seg) domain = 0; @@ -494,19 +488,12 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root) return NULL; } - node = -1; -#ifdef CONFIG_ACPI_NUMA - pxm = acpi_get_pxm(device->handle); - if (pxm >= 0) - node = pxm_to_node(pxm); - if (node != -1) - set_mp_bus_to_node(busnum, node); - else -#endif - node = get_mp_bus_to_node(busnum); + node = acpi_get_node(device->handle); + if (node == NUMA_NO_NODE) + node = x86_pci_root_bus_node(busnum); - if (node != -1 && !node_online(node)) - node = -1; + if (node != NUMA_NO_NODE && !node_online(node)) + node = NUMA_NO_NODE; info = kzalloc(sizeof(*info), GFP_KERNEL); if (!info) { @@ -519,15 +506,12 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root) sd->domain = domain; sd->node = node; sd->companion = device; - /* - * Maybe the desired pci bus has been already scanned. In such case - * it is unnecessary to scan the pci bus with the given domain,busnum. - */ + bus = pci_find_bus(domain, busnum); if (bus) { /* - * If the desired bus exits, the content of bus->sysdata will - * be replaced by sd. + * If the desired bus has been scanned already, replace + * its bus->sysdata. */ memcpy(bus->sysdata, sd, sizeof(*sd)); kfree(info); @@ -572,15 +556,8 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root) pcie_bus_configure_settings(child); } - if (bus && node != -1) { -#ifdef CONFIG_ACPI_NUMA - if (pxm >= 0) - dev_printk(KERN_DEBUG, &bus->dev, - "on NUMA node %d (pxm %d)\n", node, pxm); -#else + if (bus && node != NUMA_NO_NODE) dev_printk(KERN_DEBUG, &bus->dev, "on NUMA node %d\n", node); -#endif - } return bus; } diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c index a48be98e9ded..a313a7fb6b86 100644 --- a/arch/x86/pci/amd_bus.c +++ b/arch/x86/pci/amd_bus.c @@ -44,15 +44,6 @@ static struct pci_root_info __init *find_pci_root_info(int node, int link) return NULL; } -static void __init set_mp_bus_range_to_node(int min_bus, int max_bus, int node) -{ -#ifdef CONFIG_NUMA - int j; - - for (j = min_bus; j <= max_bus; j++) - set_mp_bus_to_node(j, node); -#endif -} /** * early_fill_mp_bus_to_node() * called before pcibios_scan_root and pci_scan_bus @@ -117,7 +108,6 @@ static int __init early_fill_mp_bus_info(void) min_bus = (reg >> 16) & 0xff; max_bus = (reg >> 24) & 0xff; node = (reg >> 4) & 0x07; - set_mp_bus_range_to_node(min_bus, max_bus, node); link = (reg >> 8) & 0x03; info = alloc_pci_root_info(min_bus, max_bus, node, link); diff --git a/arch/x86/pci/bus_numa.c b/arch/x86/pci/bus_numa.c index c2735feb2508..f3a2cfc14125 100644 --- a/arch/x86/pci/bus_numa.c +++ b/arch/x86/pci/bus_numa.c @@ -10,9 +10,6 @@ static struct pci_root_info *x86_find_pci_root_info(int bus) { struct pci_root_info *info; - if (list_empty(&pci_root_infos)) - return NULL; - list_for_each_entry(info, &pci_root_infos, list) if (info->busn.start == bus) return info; @@ -20,6 +17,16 @@ static struct pci_root_info *x86_find_pci_root_info(int bus) return NULL; } +int x86_pci_root_bus_node(int bus) +{ + struct pci_root_info *info = x86_find_pci_root_info(bus); + + if (!info) + return NUMA_NO_NODE; + + return info->node; +} + void x86_pci_root_bus_resources(int bus, struct list_head *resources) { struct pci_root_info *info = x86_find_pci_root_info(bus); diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index 981c2dbd72cc..059a76c29739 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -456,19 +456,25 @@ void __init dmi_check_pciprobe(void) dmi_check_system(pciprobe_dmi_table); } -struct pci_bus *pcibios_scan_root(int busnum) +void pcibios_scan_root(int busnum) { - struct pci_bus *bus = NULL; + struct pci_bus *bus; + struct pci_sysdata *sd; + LIST_HEAD(resources); - while ((bus = pci_find_next_bus(bus)) != NULL) { - if (bus->number == busnum) { - /* Already scanned */ - return bus; - } + sd = kzalloc(sizeof(*sd), GFP_KERNEL); + if (!sd) { + printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busnum); + return; + } + sd->node = x86_pci_root_bus_node(busnum); + x86_pci_root_bus_resources(busnum, &resources); + printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum); + bus = pci_scan_root_bus(NULL, busnum, &pci_root_ops, sd, &resources); + if (!bus) { + pci_free_resource_list(&resources); + kfree(sd); } - - return pci_scan_bus_on_node(busnum, &pci_root_ops, - get_mp_bus_to_node(busnum)); } void __init pcibios_set_cache_line_size(void) @@ -561,7 +567,6 @@ char * __init pcibios_setup(char *str) pci_probe |= PCI_PROBE_NOEARLY; return NULL; } -#ifndef CONFIG_X86_VISWS else if (!strcmp(str, "usepirqmask")) { pci_probe |= PCI_USE_PIRQ_MASK; return NULL; @@ -571,9 +576,7 @@ char * __init pcibios_setup(char *str) } else if (!strncmp(str, "lastbus=", 8)) { pcibios_last_bus = simple_strtol(str+8, NULL, 0); return NULL; - } -#endif - else if (!strcmp(str, "rom")) { + } else if (!strcmp(str, "rom")) { pci_probe |= PCI_ASSIGN_ROMS; return NULL; } else if (!strcmp(str, "norom")) { @@ -677,105 +680,3 @@ int pci_ext_cfg_avail(void) else return 0; } - -struct pci_bus *pci_scan_bus_on_node(int busno, struct pci_ops *ops, int node) -{ - LIST_HEAD(resources); - struct pci_bus *bus = NULL; - struct pci_sysdata *sd; - - /* - * Allocate per-root-bus (not per bus) arch-specific data. - * TODO: leak; this memory is never freed. - * It's arguable whether it's worth the trouble to care. - */ - sd = kzalloc(sizeof(*sd), GFP_KERNEL); - if (!sd) { - printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busno); - return NULL; - } - sd->node = node; - x86_pci_root_bus_resources(busno, &resources); - printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busno); - bus = pci_scan_root_bus(NULL, busno, ops, sd, &resources); - if (!bus) { - pci_free_resource_list(&resources); - kfree(sd); - } - - return bus; -} - -struct pci_bus *pci_scan_bus_with_sysdata(int busno) -{ - return pci_scan_bus_on_node(busno, &pci_root_ops, -1); -} - -/* - * NUMA info for PCI busses - * - * Early arch code is responsible for filling in reasonable values here. - * A node id of "-1" means "use current node". In other words, if a bus - * has a -1 node id, it's not tightly coupled to any particular chunk - * of memory (as is the case on some Nehalem systems). - */ -#ifdef CONFIG_NUMA - -#define BUS_NR 256 - -#ifdef CONFIG_X86_64 - -static int mp_bus_to_node[BUS_NR] = { - [0 ... BUS_NR - 1] = -1 -}; - -void set_mp_bus_to_node(int busnum, int node) -{ - if (busnum >= 0 && busnum < BUS_NR) - mp_bus_to_node[busnum] = node; -} - -int get_mp_bus_to_node(int busnum) -{ - int node = -1; - - if (busnum < 0 || busnum > (BUS_NR - 1)) - return node; - - node = mp_bus_to_node[busnum]; - - /* - * let numa_node_id to decide it later in dma_alloc_pages - * if there is no ram on that node - */ - if (node != -1 && !node_online(node)) - node = -1; - - return node; -} - -#else /* CONFIG_X86_32 */ - -static int mp_bus_to_node[BUS_NR] = { - [0 ... BUS_NR - 1] = -1 -}; - -void set_mp_bus_to_node(int busnum, int node) -{ - if (busnum >= 0 && busnum < BUS_NR) - mp_bus_to_node[busnum] = (unsigned char) node; -} - -int get_mp_bus_to_node(int busnum) -{ - int node; - - if (busnum < 0 || busnum > (BUS_NR - 1)) - return 0; - node = mp_bus_to_node[busnum]; - return node; -} - -#endif /* CONFIG_X86_32 */ - -#endif /* CONFIG_NUMA */ diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c index bca9e85daaa5..94ae9ae9574f 100644 --- a/arch/x86/pci/fixup.c +++ b/arch/x86/pci/fixup.c @@ -25,9 +25,9 @@ static void pci_fixup_i450nx(struct pci_dev *d) dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb); if (busno) - pci_scan_bus_with_sysdata(busno); /* Bus A */ + pcibios_scan_root(busno); /* Bus A */ if (suba < subb) - pci_scan_bus_with_sysdata(suba+1); /* Bus B */ + pcibios_scan_root(suba+1); /* Bus B */ } pcibios_last_bus = -1; } @@ -42,7 +42,7 @@ static void pci_fixup_i450gx(struct pci_dev *d) u8 busno; pci_read_config_byte(d, 0x4a, &busno); dev_info(&d->dev, "i440KX/GX host bridge; secondary bus %02x\n", busno); - pci_scan_bus_with_sysdata(busno); + pcibios_scan_root(busno); pcibios_last_bus = -1; } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454GX, pci_fixup_i450gx); @@ -313,9 +313,10 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC1, pcie_r * IORESOURCE_ROM_SHADOW is used to associate the boot video * card with this copy. On laptops this copy has to be used since * the main ROM may be compressed or combined with another image. - * See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW - * is marked here since the boot video device will be the only enabled - * video device at this point. + * See pci_map_rom() for use of this flag. Before marking the device + * with IORESOURCE_ROM_SHADOW check if a vga_default_device is already set + * by either arch cde or vga-arbitration, if so only apply the fixup to this + * already determined primary video card. */ static void pci_fixup_video(struct pci_dev *pdev) @@ -346,12 +347,13 @@ static void pci_fixup_video(struct pci_dev *pdev) } bus = bus->parent; } - pci_read_config_word(pdev, PCI_COMMAND, &config); - if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { - pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW; - dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n"); - if (!vga_default_device()) + if (!vga_default_device() || pdev == vga_default_device()) { + pci_read_config_word(pdev, PCI_COMMAND, &config); + if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { + pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW; + dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n"); vga_set_default_device(pdev); + } } } DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c index 372e9b8989b3..84112f55dd7a 100644 --- a/arch/x86/pci/irq.c +++ b/arch/x86/pci/irq.c @@ -136,13 +136,9 @@ static void __init pirq_peer_trick(void) busmap[e->bus] = 1; } for (i = 1; i < 256; i++) { - int node; if (!busmap[i] || pci_find_bus(0, i)) continue; - node = get_mp_bus_to_node(i); - if (pci_scan_bus_on_node(i, &pci_root_ops, node)) - printk(KERN_INFO "PCI: Discovered primary peer " - "bus %02x [IRQ]\n", i); + pcibios_scan_root(i); } pcibios_last_bus = -1; } diff --git a/arch/x86/pci/legacy.c b/arch/x86/pci/legacy.c index 4db96fb1c232..5b662c0faf8c 100644 --- a/arch/x86/pci/legacy.c +++ b/arch/x86/pci/legacy.c @@ -37,19 +37,17 @@ int __init pci_legacy_init(void) void pcibios_scan_specific_bus(int busn) { int devfn; - long node; u32 l; if (pci_find_bus(0, busn)) return; - node = get_mp_bus_to_node(busn); for (devfn = 0; devfn < 256; devfn += 8) { if (!raw_pci_read(0, busn, devfn, PCI_VENDOR_ID, 2, &l) && l != 0x0000 && l != 0xffff) { DBG("Found device at %02x:%02x [%04x]\n", busn, devfn, l); printk(KERN_INFO "PCI: Discovered peer bus %02x\n", busn); - pci_scan_bus_on_node(busn, &pci_root_ops, node); + pcibios_scan_root(busn); return; } } diff --git a/arch/x86/pci/numaq_32.c b/arch/x86/pci/numaq_32.c deleted file mode 100644 index 72c229f9ebcf..000000000000 --- a/arch/x86/pci/numaq_32.c +++ /dev/null @@ -1,165 +0,0 @@ -/* - * numaq_32.c - Low-level PCI access for NUMA-Q machines - */ - -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/nodemask.h> -#include <asm/apic.h> -#include <asm/mpspec.h> -#include <asm/pci_x86.h> -#include <asm/numaq.h> - -#define BUS2QUAD(global) (mp_bus_id_to_node[global]) - -#define BUS2LOCAL(global) (mp_bus_id_to_local[global]) - -#define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local]) - -#define PCI_CONF1_MQ_ADDRESS(bus, devfn, reg) \ - (0x80000000 | (BUS2LOCAL(bus) << 16) | (devfn << 8) | (reg & ~3)) - -static void write_cf8(unsigned bus, unsigned devfn, unsigned reg) -{ - unsigned val = PCI_CONF1_MQ_ADDRESS(bus, devfn, reg); - if (xquad_portio) - writel(val, XQUAD_PORT_ADDR(0xcf8, BUS2QUAD(bus))); - else - outl(val, 0xCF8); -} - -static int pci_conf1_mq_read(unsigned int seg, unsigned int bus, - unsigned int devfn, int reg, int len, u32 *value) -{ - unsigned long flags; - void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus)); - - WARN_ON(seg); - if (!value || (bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255)) - return -EINVAL; - - raw_spin_lock_irqsave(&pci_config_lock, flags); - - write_cf8(bus, devfn, reg); - - switch (len) { - case 1: - if (xquad_portio) - *value = readb(adr + (reg & 3)); - else - *value = inb(0xCFC + (reg & 3)); - break; - case 2: - if (xquad_portio) - *value = readw(adr + (reg & 2)); - else - *value = inw(0xCFC + (reg & 2)); - break; - case 4: - if (xquad_portio) - *value = readl(adr); - else - *value = inl(0xCFC); - break; - } - - raw_spin_unlock_irqrestore(&pci_config_lock, flags); - - return 0; -} - -static int pci_conf1_mq_write(unsigned int seg, unsigned int bus, - unsigned int devfn, int reg, int len, u32 value) -{ - unsigned long flags; - void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus)); - - WARN_ON(seg); - if ((bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255)) - return -EINVAL; - - raw_spin_lock_irqsave(&pci_config_lock, flags); - - write_cf8(bus, devfn, reg); - - switch (len) { - case 1: - if (xquad_portio) - writeb(value, adr + (reg & 3)); - else - outb((u8)value, 0xCFC + (reg & 3)); - break; - case 2: - if (xquad_portio) - writew(value, adr + (reg & 2)); - else - outw((u16)value, 0xCFC + (reg & 2)); - break; - case 4: - if (xquad_portio) - writel(value, adr + reg); - else - outl((u32)value, 0xCFC); - break; - } - - raw_spin_unlock_irqrestore(&pci_config_lock, flags); - - return 0; -} - -#undef PCI_CONF1_MQ_ADDRESS - -static const struct pci_raw_ops pci_direct_conf1_mq = { - .read = pci_conf1_mq_read, - .write = pci_conf1_mq_write -}; - - -static void pci_fixup_i450nx(struct pci_dev *d) -{ - /* - * i450NX -- Find and scan all secondary buses on all PXB's. - */ - int pxb, reg; - u8 busno, suba, subb; - int quad = BUS2QUAD(d->bus->number); - - dev_info(&d->dev, "searching for i450NX host bridges\n"); - reg = 0xd0; - for(pxb=0; pxb<2; pxb++) { - pci_read_config_byte(d, reg++, &busno); - pci_read_config_byte(d, reg++, &suba); - pci_read_config_byte(d, reg++, &subb); - dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n", - pxb, busno, suba, subb); - if (busno) { - /* Bus A */ - pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, busno)); - } - if (suba < subb) { - /* Bus B */ - pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, suba+1)); - } - } - pcibios_last_bus = -1; -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx); - -int __init pci_numaq_init(void) -{ - int quad; - - raw_pci_ops = &pci_direct_conf1_mq; - - pcibios_scan_root(0); - if (num_online_nodes() > 1) - for_each_online_node(quad) { - if (quad == 0) - continue; - printk("Scanning PCI bus %d for quad %d\n", - QUADLOCAL2BUS(quad,0), quad); - pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, 0)); - } - return 0; -} diff --git a/arch/x86/pci/visws.c b/arch/x86/pci/visws.c deleted file mode 100644 index 3e6d2a6db866..000000000000 --- a/arch/x86/pci/visws.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * Low-Level PCI Support for SGI Visual Workstation - * - * (c) 1999--2000 Martin Mares <mj@ucw.cz> - */ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/init.h> - -#include <asm/setup.h> -#include <asm/pci_x86.h> -#include <asm/visws/cobalt.h> -#include <asm/visws/lithium.h> - -static int pci_visws_enable_irq(struct pci_dev *dev) { return 0; } -static void pci_visws_disable_irq(struct pci_dev *dev) { } - -/* int (*pcibios_enable_irq)(struct pci_dev *dev) = &pci_visws_enable_irq; */ -/* void (*pcibios_disable_irq)(struct pci_dev *dev) = &pci_visws_disable_irq; */ - -/* void __init pcibios_penalize_isa_irq(int irq, int active) {} */ - - -unsigned int pci_bus0, pci_bus1; - -static int __init visws_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - int irq, bus = dev->bus->number; - - pin--; - - /* Nothing useful at PIIX4 pin 1 */ - if (bus == pci_bus0 && slot == 4 && pin == 0) - return -1; - - /* PIIX4 USB is on Bus 0, Slot 4, Line 3 */ - if (bus == pci_bus0 && slot == 4 && pin == 3) { - irq = CO_IRQ(CO_APIC_PIIX4_USB); - goto out; - } - - /* First pin spread down 1 APIC entry per slot */ - if (pin == 0) { - irq = CO_IRQ((bus == pci_bus0 ? CO_APIC_PCIB_BASE0 : - CO_APIC_PCIA_BASE0) + slot); - goto out; - } - - /* lines 1,2,3 from any slot is shared in this twirly pattern */ - if (bus == pci_bus1) { - /* lines 1-3 from devices 0 1 rotate over 2 apic entries */ - irq = CO_IRQ(CO_APIC_PCIA_BASE123 + ((slot + (pin - 1)) % 2)); - } else { /* bus == pci_bus0 */ - /* lines 1-3 from devices 0-3 rotate over 3 apic entries */ - if (slot == 0) - slot = 3; /* same pattern */ - irq = CO_IRQ(CO_APIC_PCIA_BASE123 + ((3 - slot) + (pin - 1) % 3)); - } -out: - printk(KERN_DEBUG "PCI: Bus %d Slot %d Line %d -> IRQ %d\n", bus, slot, pin, irq); - return irq; -} - -int __init pci_visws_init(void) -{ - pcibios_enable_irq = &pci_visws_enable_irq; - pcibios_disable_irq = &pci_visws_disable_irq; - - /* The VISWS supports configuration access type 1 only */ - pci_probe = (pci_probe | PCI_PROBE_CONF1) & - ~(PCI_PROBE_BIOS | PCI_PROBE_CONF2); - - pci_bus0 = li_pcib_read16(LI_PCI_BUSNUM) & 0xff; - pci_bus1 = li_pcia_read16(LI_PCI_BUSNUM) & 0xff; - - printk(KERN_INFO "PCI: Lithium bridge A bus: %u, " - "bridge B (PIIX4) bus: %u\n", pci_bus1, pci_bus0); - - raw_pci_ops = &pci_direct_conf1; - pci_scan_bus_with_sysdata(pci_bus0); - pci_scan_bus_with_sysdata(pci_bus1); - pci_fixup_irqs(pci_common_swizzle, visws_map_irq); - pcibios_resource_survey(); - /* Request bus scan */ - return 1; -} |