diff options
Diffstat (limited to 'arch/x86/pci')
| -rw-r--r-- | arch/x86/pci/Makefile | 2 | ||||
| -rw-r--r-- | arch/x86/pci/broadcom_bus.c | 101 |
2 files changed, 103 insertions, 0 deletions
diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile index b110d97fb925..a0207a7fdf39 100644 --- a/arch/x86/pci/Makefile +++ b/arch/x86/pci/Makefile @@ -18,6 +18,8 @@ obj-$(CONFIG_X86_MRST) += mrst.o obj-y += common.o early.o obj-y += amd_bus.o bus_numa.o +obj-$(CONFIG_PCI_CNB20LE_QUIRK) += broadcom_bus.o + ifeq ($(CONFIG_PCI_DEBUG),y) EXTRA_CFLAGS += -DDEBUG endif diff --git a/arch/x86/pci/broadcom_bus.c b/arch/x86/pci/broadcom_bus.c new file mode 100644 index 000000000000..0846a5bbbfbd --- /dev/null +++ b/arch/x86/pci/broadcom_bus.c @@ -0,0 +1,101 @@ +/* + * Read address ranges from a Broadcom CNB20LE Host Bridge + * + * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/delay.h> +#include <linux/dmi.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <asm/pci_x86.h> + +#include "bus_numa.h" + +static void __devinit cnb20le_res(struct pci_dev *dev) +{ + struct pci_root_info *info; + struct resource res; + u16 word1, word2; + u8 fbus, lbus; + int i; + + /* + * The x86_pci_root_bus_res_quirks() function already refuses to use + * this information if ACPI _CRS was used. Therefore, we don't bother + * checking if ACPI is enabled, and just generate the information + * for both the ACPI _CRS and no ACPI cases. + */ + + info = &pci_root_info[pci_root_num]; + pci_root_num++; + + /* read the PCI bus numbers */ + pci_read_config_byte(dev, 0x44, &fbus); + pci_read_config_byte(dev, 0x45, &lbus); + info->bus_min = fbus; + info->bus_max = lbus; + + /* + * Add the legacy IDE ports on bus 0 + * + * These do not exist anywhere in the bridge registers, AFAICT. I do + * not have the datasheet, so this is the best I can do. + */ + if (fbus == 0) { + update_res(info, 0x01f0, 0x01f7, IORESOURCE_IO, 0); + update_res(info, 0x03f6, 0x03f6, IORESOURCE_IO, 0); + update_res(info, 0x0170, 0x0177, IORESOURCE_IO, 0); + update_res(info, 0x0376, 0x0376, IORESOURCE_IO, 0); + update_res(info, 0xffa0, 0xffaf, IORESOURCE_IO, 0); + } + + /* read the non-prefetchable memory window */ + pci_read_config_word(dev, 0xc0, &word1); + pci_read_config_word(dev, 0xc2, &word2); + if (word1 != word2) { + res.start = (word1 << 16) | 0x0000; + res.end = (word2 << 16) | 0xffff; + res.flags = IORESOURCE_MEM; + update_res(info, res.start, res.end, res.flags, 0); + } + + /* read the prefetchable memory window */ + pci_read_config_word(dev, 0xc4, &word1); + pci_read_config_word(dev, 0xc6, &word2); + if (word1 != word2) { + res.start = (word1 << 16) | 0x0000; + res.end = (word2 << 16) | 0xffff; + res.flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; + update_res(info, res.start, res.end, res.flags, 0); + } + + /* read the IO port window */ + pci_read_config_word(dev, 0xd0, &word1); + pci_read_config_word(dev, 0xd2, &word2); + if (word1 != word2) { + res.start = word1; + res.end = word2; + res.flags = IORESOURCE_IO; + update_res(info, res.start, res.end, res.flags, 0); + } + + /* print information about this host bridge */ + res.start = fbus; + res.end = lbus; + res.flags = IORESOURCE_BUS; + dev_info(&dev->dev, "CNB20LE PCI Host Bridge (domain %04x %pR)\n", + pci_domain_nr(dev->bus), &res); + + for (i = 0; i < info->res_num; i++) + dev_info(&dev->dev, "host bridge window %pR\n", &info->res[i]); +} + +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_LE, + cnb20le_res); + |