diff options
Diffstat (limited to 'arch/x86')
| -rw-r--r-- | arch/x86/Kconfig | 17 | ||||
| -rw-r--r-- | arch/x86/include/asm/fixmap.h | 6 | ||||
| -rw-r--r-- | arch/x86/include/asm/hw_irq.h | 1 | ||||
| -rw-r--r-- | arch/x86/include/asm/setup.h | 6 | ||||
| -rw-r--r-- | arch/x86/include/asm/visws/cobalt.h | 127 | ||||
| -rw-r--r-- | arch/x86/include/asm/visws/lithium.h | 53 | ||||
| -rw-r--r-- | arch/x86/include/asm/visws/piix4.h | 107 | ||||
| -rw-r--r-- | arch/x86/include/asm/visws/sgivw.h | 5 | ||||
| -rw-r--r-- | arch/x86/kernel/apic/apic.c | 1 | ||||
| -rw-r--r-- | arch/x86/kernel/setup.c | 1 | ||||
| -rw-r--r-- | arch/x86/pci/Makefile | 2 | ||||
| -rw-r--r-- | arch/x86/pci/common.c | 5 | ||||
| -rw-r--r-- | arch/x86/pci/visws.c | 87 | ||||
| -rw-r--r-- | arch/x86/platform/Makefile | 1 | ||||
| -rw-r--r-- | arch/x86/platform/visws/Makefile | 1 | ||||
| -rw-r--r-- | arch/x86/platform/visws/visws_quirks.c | 608 | ||||
| -rw-r--r-- | arch/x86/xen/Kconfig | 2 |
17 files changed, 2 insertions, 1028 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 4c33fc2336e7..3c7f6dbf8498 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -517,19 +517,6 @@ config X86_SUPPORTS_MEMORY_FAILURE depends on X86_64 || !SPARSEMEM select ARCH_SUPPORTS_MEMORY_FAILURE -config X86_VISWS - bool "SGI 320/540 (Visual Workstation)" - depends on X86_32 && PCI && X86_MPPARSE && PCI_GODIRECT - depends on X86_32_NON_STANDARD - ---help--- - The SGI Visual Workstation series is an IA32-based workstation - based on SGI systems chips with some legacy PC hardware attached. - - Say Y here to create a kernel to run on the SGI 320 or 540. - - A kernel compiled for the Visual Workstation will run on general - PCs as well. See <file:Documentation/sgi-visws.txt> for details. - config STA2X11 bool "STA2X11 Companion Chip Support" depends on X86_32_NON_STANDARD && PCI @@ -860,10 +847,6 @@ config X86_IO_APIC def_bool y depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_IOAPIC || PCI_MSI -config X86_VISWS_APIC - def_bool y - depends on X86_32 && X86_VISWS - config X86_REROUTE_FOR_BROKEN_BOOT_IRQS bool "Reroute for broken boot IRQs" depends on X86_IO_APIC diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h index 7252cd339175..f690ee420bf4 100644 --- a/arch/x86/include/asm/fixmap.h +++ b/arch/x86/include/asm/fixmap.h @@ -98,12 +98,6 @@ enum fixed_addresses { FIX_IO_APIC_BASE_0, FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS - 1, #endif -#ifdef CONFIG_X86_VISWS_APIC - FIX_CO_CPU, /* Cobalt timer */ - FIX_CO_APIC, /* Cobalt APIC Redirection Table */ - FIX_LI_PCIA, /* Lithium PCI Bridge A */ - FIX_LI_PCIB, /* Lithium PCI Bridge B */ -#endif FIX_RO_IDT, /* Virtual mapping for read-only IDT */ #ifdef CONFIG_X86_32 FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */ diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h index 67d69b8e2d20..a307b7530e54 100644 --- a/arch/x86/include/asm/hw_irq.h +++ b/arch/x86/include/asm/hw_irq.h @@ -98,7 +98,6 @@ extern void trace_call_function_single_interrupt(void); #define IO_APIC_IRQ(x) (((x) >= NR_IRQS_LEGACY) || ((1<<(x)) & io_apic_irqs)) extern unsigned long io_apic_irqs; -extern void init_VISWS_APIC_irqs(void); extern void setup_IO_APIC(void); extern void disable_IO_APIC(void); diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h index d62c9f809bc5..9264f04a4c55 100644 --- a/arch/x86/include/asm/setup.h +++ b/arch/x86/include/asm/setup.h @@ -39,12 +39,6 @@ static inline void vsmp_init(void) { } void setup_bios_corruption_check(void); -#ifdef CONFIG_X86_VISWS -extern void visws_early_detect(void); -#else -static inline void visws_early_detect(void) { } -#endif - extern unsigned long saved_video_mode; extern void reserve_standard_io_resources(void); diff --git a/arch/x86/include/asm/visws/cobalt.h b/arch/x86/include/asm/visws/cobalt.h deleted file mode 100644 index 2edb37637ead..000000000000 --- a/arch/x86/include/asm/visws/cobalt.h +++ /dev/null @@ -1,127 +0,0 @@ -#ifndef _ASM_X86_VISWS_COBALT_H -#define _ASM_X86_VISWS_COBALT_H - -#include <asm/fixmap.h> - -/* - * Cobalt SGI Visual Workstation system ASIC - */ - -#define CO_CPU_NUM_PHYS 0x1e00 -#define CO_CPU_TAB_PHYS (CO_CPU_NUM_PHYS + 2) - -#define CO_CPU_MAX 4 - -#define CO_CPU_PHYS 0xc2000000 -#define CO_APIC_PHYS 0xc4000000 - -/* see set_fixmap() and asm/fixmap.h */ -#define CO_CPU_VADDR (fix_to_virt(FIX_CO_CPU)) -#define CO_APIC_VADDR (fix_to_virt(FIX_CO_APIC)) - -/* Cobalt CPU registers -- relative to CO_CPU_VADDR, use co_cpu_*() */ -#define CO_CPU_REV 0x08 -#define CO_CPU_CTRL 0x10 -#define CO_CPU_STAT 0x20 -#define CO_CPU_TIMEVAL 0x30 - -/* CO_CPU_CTRL bits */ -#define CO_CTRL_TIMERUN 0x04 /* 0 == disabled */ -#define CO_CTRL_TIMEMASK 0x08 /* 0 == unmasked */ - -/* CO_CPU_STATUS bits */ -#define CO_STAT_TIMEINTR 0x02 /* (r) 1 == int pend, (w) 0 == clear */ - -/* CO_CPU_TIMEVAL value */ -#define CO_TIME_HZ 100000000 /* Cobalt core rate */ - -/* Cobalt APIC registers -- relative to CO_APIC_VADDR, use co_apic_*() */ -#define CO_APIC_HI(n) (((n) * 0x10) + 4) -#define CO_APIC_LO(n) ((n) * 0x10) -#define CO_APIC_ID 0x0ffc - -/* CO_APIC_ID bits */ -#define CO_APIC_ENABLE 0x00000100 - -/* CO_APIC_LO bits */ -#define CO_APIC_MASK 0x00010000 /* 0 = enabled */ -#define CO_APIC_LEVEL 0x00008000 /* 0 = edge */ - -/* - * Where things are physically wired to Cobalt - * #defines with no board _<type>_<rev>_ are common to all (thus far) - */ -#define CO_APIC_IDE0 4 -#define CO_APIC_IDE1 2 /* Only on 320 */ - -#define CO_APIC_8259 12 /* serial, floppy, par-l-l */ - -/* Lithium PCI Bridge A -- "the one with 82557 Ethernet" */ -#define CO_APIC_PCIA_BASE0 0 /* and 1 */ /* slot 0, line 0 */ -#define CO_APIC_PCIA_BASE123 5 /* and 6 */ /* slot 0, line 1 */ - -#define CO_APIC_PIIX4_USB 7 /* this one is weird */ - -/* Lithium PCI Bridge B -- "the one with PIIX4" */ -#define CO_APIC_PCIB_BASE0 8 /* and 9-12 *//* slot 0, line 0 */ -#define CO_APIC_PCIB_BASE123 13 /* 14.15 */ /* slot 0, line 1 */ - -#define CO_APIC_VIDOUT0 16 -#define CO_APIC_VIDOUT1 17 -#define CO_APIC_VIDIN0 18 -#define CO_APIC_VIDIN1 19 - -#define CO_APIC_LI_AUDIO 22 - -#define CO_APIC_AS 24 -#define CO_APIC_RE 25 - -#define CO_APIC_CPU 28 /* Timer and Cache interrupt */ -#define CO_APIC_NMI 29 -#define CO_APIC_LAST CO_APIC_NMI - -/* - * This is how irqs are assigned on the Visual Workstation. - * Legacy devices get irq's 1-15 (system clock is 0 and is CO_APIC_CPU). - * All other devices (including PCI) go to Cobalt and are irq's 16 on up. - */ -#define CO_IRQ_APIC0 16 /* irq of apic entry 0 */ -#define IS_CO_APIC(irq) ((irq) >= CO_IRQ_APIC0) -#define CO_IRQ(apic) (CO_IRQ_APIC0 + (apic)) /* apic ent to irq */ -#define CO_APIC(irq) ((irq) - CO_IRQ_APIC0) /* irq to apic ent */ -#define CO_IRQ_IDE0 14 /* knowledge of... */ -#define CO_IRQ_IDE1 15 /* ... ide driver defaults! */ -#define CO_IRQ_8259 CO_IRQ(CO_APIC_8259) - -#ifdef CONFIG_X86_VISWS_APIC -static inline void co_cpu_write(unsigned long reg, unsigned long v) -{ - *((volatile unsigned long *)(CO_CPU_VADDR+reg))=v; -} - -static inline unsigned long co_cpu_read(unsigned long reg) -{ - return *((volatile unsigned long *)(CO_CPU_VADDR+reg)); -} - -static inline void co_apic_write(unsigned long reg, unsigned long v) -{ - *((volatile unsigned long *)(CO_APIC_VADDR+reg))=v; -} - -static inline unsigned long co_apic_read(unsigned long reg) -{ - return *((volatile unsigned long *)(CO_APIC_VADDR+reg)); -} -#endif - -extern char visws_board_type; - -#define VISWS_320 0 -#define VISWS_540 1 - -extern char visws_board_rev; - -extern int pci_visws_init(void); - -#endif /* _ASM_X86_VISWS_COBALT_H */ diff --git a/arch/x86/include/asm/visws/lithium.h b/arch/x86/include/asm/visws/lithium.h deleted file mode 100644 index a10d89bc1270..000000000000 --- a/arch/x86/include/asm/visws/lithium.h +++ /dev/null @@ -1,53 +0,0 @@ -#ifndef _ASM_X86_VISWS_LITHIUM_H -#define _ASM_X86_VISWS_LITHIUM_H - -#include <asm/fixmap.h> - -/* - * Lithium is the SGI Visual Workstation I/O ASIC - */ - -#define LI_PCI_A_PHYS 0xfc000000 /* Enet is dev 3 */ -#define LI_PCI_B_PHYS 0xfd000000 /* PIIX4 is here */ - -/* see set_fixmap() and asm/fixmap.h */ -#define LI_PCIA_VADDR (fix_to_virt(FIX_LI_PCIA)) -#define LI_PCIB_VADDR (fix_to_virt(FIX_LI_PCIB)) - -/* Not a standard PCI? (not in linux/pci.h) */ -#define LI_PCI_BUSNUM 0x44 /* lo8: primary, hi8: sub */ -#define LI_PCI_INTEN 0x46 - -/* LI_PCI_INTENT bits */ -#define LI_INTA_0 0x0001 -#define LI_INTA_1 0x0002 -#define LI_INTA_2 0x0004 -#define LI_INTA_3 0x0008 -#define LI_INTA_4 0x0010 -#define LI_INTB 0x0020 -#define LI_INTC 0x0040 -#define LI_INTD 0x0080 - -/* More special purpose macros... */ -static inline void li_pcia_write16(unsigned long reg, unsigned short v) -{ - *((volatile unsigned short *)(LI_PCIA_VADDR+reg))=v; -} - -static inline unsigned short li_pcia_read16(unsigned long reg) -{ - return *((volatile unsigned short *)(LI_PCIA_VADDR+reg)); -} - -static inline void li_pcib_write16(unsigned long reg, unsigned short v) -{ - *((volatile unsigned short *)(LI_PCIB_VADDR+reg))=v; -} - -static inline unsigned short li_pcib_read16(unsigned long reg) -{ - return *((volatile unsigned short *)(LI_PCIB_VADDR+reg)); -} - -#endif /* _ASM_X86_VISWS_LITHIUM_H */ - diff --git a/arch/x86/include/asm/visws/piix4.h b/arch/x86/include/asm/visws/piix4.h deleted file mode 100644 index d0af4d338e7f..000000000000 --- a/arch/x86/include/asm/visws/piix4.h +++ /dev/null @@ -1,107 +0,0 @@ -#ifndef _ASM_X86_VISWS_PIIX4_H -#define _ASM_X86_VISWS_PIIX4_H - -/* - * PIIX4 as used on SGI Visual Workstations - */ - -#define PIIX_PM_START 0x0F80 - -#define SIO_GPIO_START 0x0FC0 - -#define SIO_PM_START 0x0FC8 - -#define PMBASE PIIX_PM_START -#define GPIREG0 (PMBASE+0x30) -#define GPIREG(x) (GPIREG0+((x)/8)) -#define GPIBIT(x) (1 << ((x)%8)) - -#define PIIX_GPI_BD_ID1 18 -#define PIIX_GPI_BD_ID2 19 -#define PIIX_GPI_BD_ID3 20 -#define PIIX_GPI_BD_ID4 21 -#define PIIX_GPI_BD_REG GPIREG(PIIX_GPI_BD_ID1) -#define PIIX_GPI_BD_MASK (GPIBIT(PIIX_GPI_BD_ID1) | \ - GPIBIT(PIIX_GPI_BD_ID2) | \ - GPIBIT(PIIX_GPI_BD_ID3) | \ - GPIBIT(PIIX_GPI_BD_ID4) ) - -#define PIIX_GPI_BD_SHIFT (PIIX_GPI_BD_ID1 % 8) - -#define SIO_INDEX 0x2e -#define SIO_DATA 0x2f - -#define SIO_DEV_SEL 0x7 -#define SIO_DEV_ENB 0x30 -#define SIO_DEV_MSB 0x60 -#define SIO_DEV_LSB 0x61 - -#define SIO_GP_DEV 0x7 - -#define SIO_GP_BASE SIO_GPIO_START -#define SIO_GP_MSB (SIO_GP_BASE>>8) -#define SIO_GP_LSB (SIO_GP_BASE&0xff) - -#define SIO_GP_DATA1 (SIO_GP_BASE+0) - -#define SIO_PM_DEV 0x8 - -#define SIO_PM_BASE SIO_PM_START -#define SIO_PM_MSB (SIO_PM_BASE>>8) -#define SIO_PM_LSB (SIO_PM_BASE&0xff) -#define SIO_PM_INDEX (SIO_PM_BASE+0) -#define SIO_PM_DATA (SIO_PM_BASE+1) - -#define SIO_PM_FER2 0x1 - -#define SIO_PM_GP_EN 0x80 - - - -/* - * This is the dev/reg where generating a config cycle will - * result in a PCI special cycle. - */ -#define SPECIAL_DEV 0xff -#define SPECIAL_REG 0x00 - -/* - * PIIX4 needs to see a special cycle with the following data - * to be convinced the processor has gone into the stop grant - * state. PIIX4 insists on seeing this before it will power - * down a system. - */ -#define PIIX_SPECIAL_STOP 0x00120002 - -#define PIIX4_RESET_PORT 0xcf9 -#define PIIX4_RESET_VAL 0x6 - -#define PMSTS_PORT 0xf80 // 2 bytes PM Status -#define PMEN_PORT 0xf82 // 2 bytes PM Enable -#define PMCNTRL_PORT 0xf84 // 2 bytes PM Control - -#define PM_SUSPEND_ENABLE 0x2000 // start sequence to suspend state - -/* - * PMSTS and PMEN I/O bit definitions. - * (Bits are the same in both registers) - */ -#define PM_STS_RSM (1<<15) // Resume Status -#define PM_STS_PWRBTNOR (1<<11) // Power Button Override -#define PM_STS_RTC (1<<10) // RTC status -#define PM_STS_PWRBTN (1<<8) // Power Button Pressed? -#define PM_STS_GBL (1<<5) // Global Status -#define PM_STS_BM (1<<4) // Bus Master Status -#define PM_STS_TMROF (1<<0) // Timer Overflow Status. - -/* - * Stop clock GPI register - */ -#define PIIX_GPIREG0 (0xf80 + 0x30) - -/* - * Stop clock GPI bit in GPIREG0 - */ -#define PIIX_GPI_STPCLK 0x4 // STPCLK signal routed back in - -#endif /* _ASM_X86_VISWS_PIIX4_H */ diff --git a/arch/x86/include/asm/visws/sgivw.h b/arch/x86/include/asm/visws/sgivw.h deleted file mode 100644 index 5fbf63e1003c..000000000000 --- a/arch/x86/include/asm/visws/sgivw.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * Frame buffer position and size: - */ -extern unsigned long sgivwfb_mem_phys; -extern unsigned long sgivwfb_mem_size; diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index f824d697db19..9edae8a8ed27 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -2132,7 +2132,6 @@ int generic_processor_info(int apicid, int version) * * - arch/x86/kernel/mpparse.c: MP_processor_info() * - arch/x86/mm/amdtopology.c: amd_numa_init() - * - arch/x86/platform/visws/visws_quirks.c: MP_processor_info() * * This function is executed with the modified * boot_cpu_physical_apicid. So, disabled_cpu_apicid kernel diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 06853e670354..12907ab8f33e 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -869,7 +869,6 @@ void __init setup_arch(char **cmdline_p) #ifdef CONFIG_X86_32 memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data)); - visws_early_detect(); /* * copy kernel address range established so far and switch diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile index e063eed0f912..758b8272c821 100644 --- a/arch/x86/pci/Makefile +++ b/arch/x86/pci/Makefile @@ -13,8 +13,6 @@ obj-y += legacy.o irq.o obj-$(CONFIG_STA2X11) += sta2x11-fixup.o -obj-$(CONFIG_X86_VISWS) += visws.o - obj-$(CONFIG_X86_NUMAQ) += numaq_32.o obj-$(CONFIG_X86_NUMACHIP) += numachip.o diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index 981c2dbd72cc..ed11916310c1 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -561,7 +561,6 @@ char * __init pcibios_setup(char *str) pci_probe |= PCI_PROBE_NOEARLY; return NULL; } -#ifndef CONFIG_X86_VISWS else if (!strcmp(str, "usepirqmask")) { pci_probe |= PCI_USE_PIRQ_MASK; return NULL; @@ -571,9 +570,7 @@ char * __init pcibios_setup(char *str) } else if (!strncmp(str, "lastbus=", 8)) { pcibios_last_bus = simple_strtol(str+8, NULL, 0); return NULL; - } -#endif - else if (!strcmp(str, "rom")) { + } else if (!strcmp(str, "rom")) { pci_probe |= PCI_ASSIGN_ROMS; return NULL; } else if (!strcmp(str, "norom")) { diff --git a/arch/x86/pci/visws.c b/arch/x86/pci/visws.c deleted file mode 100644 index 3e6d2a6db866..000000000000 --- a/arch/x86/pci/visws.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * Low-Level PCI Support for SGI Visual Workstation - * - * (c) 1999--2000 Martin Mares <mj@ucw.cz> - */ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/init.h> - -#include <asm/setup.h> -#include <asm/pci_x86.h> -#include <asm/visws/cobalt.h> -#include <asm/visws/lithium.h> - -static int pci_visws_enable_irq(struct pci_dev *dev) { return 0; } -static void pci_visws_disable_irq(struct pci_dev *dev) { } - -/* int (*pcibios_enable_irq)(struct pci_dev *dev) = &pci_visws_enable_irq; */ -/* void (*pcibios_disable_irq)(struct pci_dev *dev) = &pci_visws_disable_irq; */ - -/* void __init pcibios_penalize_isa_irq(int irq, int active) {} */ - - -unsigned int pci_bus0, pci_bus1; - -static int __init visws_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - int irq, bus = dev->bus->number; - - pin--; - - /* Nothing useful at PIIX4 pin 1 */ - if (bus == pci_bus0 && slot == 4 && pin == 0) - return -1; - - /* PIIX4 USB is on Bus 0, Slot 4, Line 3 */ - if (bus == pci_bus0 && slot == 4 && pin == 3) { - irq = CO_IRQ(CO_APIC_PIIX4_USB); - goto out; - } - - /* First pin spread down 1 APIC entry per slot */ - if (pin == 0) { - irq = CO_IRQ((bus == pci_bus0 ? CO_APIC_PCIB_BASE0 : - CO_APIC_PCIA_BASE0) + slot); - goto out; - } - - /* lines 1,2,3 from any slot is shared in this twirly pattern */ - if (bus == pci_bus1) { - /* lines 1-3 from devices 0 1 rotate over 2 apic entries */ - irq = CO_IRQ(CO_APIC_PCIA_BASE123 + ((slot + (pin - 1)) % 2)); - } else { /* bus == pci_bus0 */ - /* lines 1-3 from devices 0-3 rotate over 3 apic entries */ - if (slot == 0) - slot = 3; /* same pattern */ - irq = CO_IRQ(CO_APIC_PCIA_BASE123 + ((3 - slot) + (pin - 1) % 3)); - } -out: - printk(KERN_DEBUG "PCI: Bus %d Slot %d Line %d -> IRQ %d\n", bus, slot, pin, irq); - return irq; -} - -int __init pci_visws_init(void) -{ - pcibios_enable_irq = &pci_visws_enable_irq; - pcibios_disable_irq = &pci_visws_disable_irq; - - /* The VISWS supports configuration access type 1 only */ - pci_probe = (pci_probe | PCI_PROBE_CONF1) & - ~(PCI_PROBE_BIOS | PCI_PROBE_CONF2); - - pci_bus0 = li_pcib_read16(LI_PCI_BUSNUM) & 0xff; - pci_bus1 = li_pcia_read16(LI_PCI_BUSNUM) & 0xff; - - printk(KERN_INFO "PCI: Lithium bridge A bus: %u, " - "bridge B (PIIX4) bus: %u\n", pci_bus1, pci_bus0); - - raw_pci_ops = &pci_direct_conf1; - pci_scan_bus_with_sysdata(pci_bus0); - pci_scan_bus_with_sysdata(pci_bus1); - pci_fixup_irqs(pci_common_swizzle, visws_map_irq); - pcibios_resource_survey(); - /* Request bus scan */ - return 1; -} diff --git a/arch/x86/platform/Makefile b/arch/x86/platform/Makefile index 20342d4c82ce..85afde1fa3e5 100644 --- a/arch/x86/platform/Makefile +++ b/arch/x86/platform/Makefile @@ -9,5 +9,4 @@ obj-y += olpc/ obj-y += scx200/ obj-y += sfi/ obj-y += ts5500/ -obj-y += visws/ obj-y += uv/ diff --git a/arch/x86/platform/visws/Makefile b/arch/x86/platform/visws/Makefile deleted file mode 100644 index 91bc17ab2fd5..000000000000 --- a/arch/x86/platform/visws/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-$(CONFIG_X86_VISWS) += visws_quirks.o diff --git a/arch/x86/platform/visws/visws_quirks.c b/arch/x86/platform/visws/visws_quirks.c deleted file mode 100644 index 94d8a39332ec..000000000000 --- a/arch/x86/platform/visws/visws_quirks.c +++ /dev/null @@ -1,608 +0,0 @@ -/* - * SGI Visual Workstation support and quirks, unmaintained. - * - * Split out from setup.c by davej@suse.de - * - * Copyright (C) 1999 Bent Hagemark, Ingo Molnar - * - * SGI Visual Workstation interrupt controller - * - * The Cobalt system ASIC in the Visual Workstation contains a "Cobalt" APIC - * which serves as the main interrupt controller in the system. Non-legacy - * hardware in the system uses this controller directly. Legacy devices - * are connected to the PIIX4 which in turn has its 8259(s) connected to - * a of the Cobalt APIC entry. - * - * 09/02/2000 - Updated for 2.4 by jbarnes@sgi.com - * - * 25/11/2002 - Updated for 2.5 by Andrey Panin <pazke@orbita1.ru> - */ -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/smp.h> - -#include <asm/visws/cobalt.h> -#include <asm/visws/piix4.h> -#include <asm/io_apic.h> -#include <asm/fixmap.h> -#include <asm/reboot.h> -#include <asm/setup.h> -#include <asm/apic.h> -#include <asm/e820.h> -#include <asm/time.h> -#include <asm/io.h> - -#include <linux/kernel_stat.h> - -#include <asm/i8259.h> -#include <asm/irq_vectors.h> -#include <asm/visws/lithium.h> - -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/pci_ids.h> - -extern int no_broadcast; - -char visws_board_type = -1; -char visws_board_rev = -1; - -static void __init visws_time_init(void) -{ - printk(KERN_INFO "Starting Cobalt Timer system clock\n"); - - /* Set the countdown value */ - co_cpu_write(CO_CPU_TIMEVAL, CO_TIME_HZ/HZ); - - /* Start the timer */ - co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) | CO_CTRL_TIMERUN); - - /* Enable (unmask) the timer interrupt */ - co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) & ~CO_CTRL_TIMEMASK); - - setup_default_timer_irq(); -} - -/* Replaces the default init_ISA_irqs in the generic setup */ -static void __init visws_pre_intr_init(void); - -/* Quirk for machine specific memory setup. */ - -#define MB (1024 * 1024) - -unsigned long sgivwfb_mem_phys; -unsigned long sgivwfb_mem_size; -EXPORT_SYMBOL(sgivwfb_mem_phys); -EXPORT_SYMBOL(sgivwfb_mem_size); - -long long mem_size __initdata = 0; - -static char * __init visws_memory_setup(void) -{ - long long gfx_mem_size = 8 * MB; - - mem_size = boot_params.alt_mem_k; - - if (!mem_size) { - printk(KERN_WARNING "Bootloader didn't set memory size, upgrade it !\n"); - mem_size = 128 * MB; - } - - /* - * this hardcodes the graphics memory to 8 MB - * it really should be sized dynamically (or at least - * set as a boot param) - */ - if (!sgivwfb_mem_size) { - printk(KERN_WARNING "Defaulting to 8 MB framebuffer size\n"); - sgivwfb_mem_size = 8 * MB; - } - - /* - * Trim to nearest MB - */ - sgivwfb_mem_size &= ~((1 << 20) - 1); - sgivwfb_mem_phys = mem_size - gfx_mem_size; - - e820_add_region(0, LOWMEMSIZE(), E820_RAM); - e820_add_region(HIGH_MEMORY, mem_size - sgivwfb_mem_size - HIGH_MEMORY, E820_RAM); - e820_add_region(sgivwfb_mem_phys, sgivwfb_mem_size, E820_RESERVED); - - return "PROM"; -} - -static void visws_machine_emergency_restart(void) -{ - /* - * Visual Workstations restart after this - * register is poked on the PIIX4 - */ - outb(PIIX4_RESET_VAL, PIIX4_RESET_PORT); -} - -static void visws_machine_power_off(void) -{ - unsigned short pm_status; -/* extern unsigned int pci_bus0; */ - - while ((pm_status = inw(PMSTS_PORT)) & 0x100) - outw(pm_status, PMSTS_PORT); - - outw(PM_SUSPEND_ENABLE, PMCNTRL_PORT); - - mdelay(10); - -#define PCI_CONF1_ADDRESS(bus, devfn, reg) \ - (0x80000000 | (bus << 16) | (devfn << 8) | (reg & ~3)) - -/* outl(PCI_CONF1_ADDRESS(pci_bus0, SPECIAL_DEV, SPECIAL_REG), 0xCF8); */ - outl(PIIX_SPECIAL_STOP, 0xCFC); -} - -static void __init visws_get_smp_config(unsigned int early) -{ -} - -/* - * The Visual Workstation is Intel MP compliant in the hardware - * sense, but it doesn't have a BIOS(-configuration table). - * No problem for Linux. - */ - -static void __init MP_processor_info(struct mpc_cpu *m) -{ - int ver, logical_apicid; - physid_mask_t apic_cpus; - - if (!(m->cpuflag & CPU_ENABLED)) - return; - - logical_apicid = m->apicid; - printk(KERN_INFO "%sCPU #%d %u:%u APIC version %d\n", - m->cpuflag & CPU_BOOTPROCESSOR ? "Bootup " : "", - m->apicid, (m->cpufeature & CPU_FAMILY_MASK) >> 8, - (m->cpufeature & CPU_MODEL_MASK) >> 4, m->apicver); - - if (m->cpuflag & CPU_BOOTPROCESSOR) - boot_cpu_physical_apicid = m->apicid; - - ver = m->apicver; - if ((ver >= 0x14 && m->apicid >= 0xff) || m->apicid >= 0xf) { - printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n", - m->apicid, MAX_LOCAL_APIC); - return; - } - - apic->apicid_to_cpu_present(m->apicid, &apic_cpus); - physids_or(phys_cpu_present_map, phys_cpu_present_map, apic_cpus); - /* - * Validate version - */ - if (ver == 0x0) { - printk(KERN_ERR "BIOS bug, APIC version is 0 for CPU#%d! " - "fixing up to 0x10. (tell your hw vendor)\n", - m->apicid); - ver = 0x10; - } - apic_version[m->apicid] = ver; -} - -static void __init visws_find_smp_config(void) -{ - struct mpc_cpu *mp = phys_to_virt(CO_CPU_TAB_PHYS); - unsigned short ncpus = readw(phys_to_virt(CO_CPU_NUM_PHYS)); - - if (ncpus > CO_CPU_MAX) { - printk(KERN_WARNING "find_visws_smp: got cpu count of %d at %p\n", - ncpus, mp); - - ncpus = CO_CPU_MAX; - } - - if (ncpus > setup_max_cpus) - ncpus = setup_max_cpus; - -#ifdef CONFIG_X86_LOCAL_APIC - smp_found_config = 1; -#endif - while (ncpus--) - MP_processor_info(mp++); - - mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; -} - -static void visws_trap_init(void); - -void __init visws_early_detect(void) -{ - int raw; - - visws_board_type = (char)(inb_p(PIIX_GPI_BD_REG) & PIIX_GPI_BD_REG) - >> PIIX_GPI_BD_SHIFT; - - if (visws_board_type < 0) - return; - - /* - * Override the default platform setup functions - */ - x86_init.resources.memory_setup = visws_memory_setup; - x86_init.mpparse.get_smp_config = visws_get_smp_config; - x86_init.mpparse.find_smp_config = visws_find_smp_config; - x86_init.irqs.pre_vector_init = visws_pre_intr_init; - x86_init.irqs.trap_init = visws_trap_init; - x86_init.timers.timer_init = visws_time_init; - x86_init.pci.init = pci_visws_init; - x86_init.pci.init_irq = x86_init_noop; - - /* - * Install reboot quirks: - */ - pm_power_off = visws_machine_power_off; - machine_ops.emergency_restart = visws_machine_emergency_restart; - - /* - * Do not use broadcast IPIs: - */ - no_broadcast = 0; - -#ifdef CONFIG_X86_IO_APIC - /* - * Turn off IO-APIC detection and initialization: - */ - skip_ioapic_setup = 1; -#endif - - /* - * Get Board rev. - * First, we have to initialize the 307 part to allow us access - * to the GPIO registers. Let's map them at 0x0fc0 which is right - * after the PIIX4 PM section. - */ - outb_p(SIO_DEV_SEL, SIO_INDEX); - outb_p(SIO_GP_DEV, SIO_DATA); /* Talk to GPIO regs. */ - - outb_p(SIO_DEV_MSB, SIO_INDEX); - outb_p(SIO_GP_MSB, SIO_DATA); /* MSB of GPIO base address */ - - outb_p(SIO_DEV_LSB, SIO_INDEX); - outb_p(SIO_GP_LSB, SIO_DATA); /* LSB of GPIO base address */ - - outb_p(SIO_DEV_ENB, SIO_INDEX); - outb_p(1, SIO_DATA); /* Enable GPIO registers. */ - - /* - * Now, we have to map the power management section to write - * a bit which enables access to the GPIO registers. - * What lunatic came up with this shit? - */ - outb_p(SIO_DEV_SEL, SIO_INDEX); - outb_p(SIO_PM_DEV, SIO_DATA); /* Talk to GPIO regs. */ - - outb_p(SIO_DEV_MSB, SIO_INDEX); - outb_p(SIO_PM_MSB, SIO_DATA); /* MSB of PM base address */ - - outb_p(SIO_DEV_LSB, SIO_INDEX); - outb_p(SIO_PM_LSB, SIO_DATA); /* LSB of PM base address */ - - outb_p(SIO_DEV_ENB, SIO_INDEX); - outb_p(1, SIO_DATA); /* Enable PM registers. */ - - /* - * Now, write the PM register which enables the GPIO registers. - */ - outb_p(SIO_PM_FER2, SIO_PM_INDEX); - outb_p(SIO_PM_GP_EN, SIO_PM_DATA); - - /* - * Now, initialize the GPIO registers. - * We want them all to be inputs which is the - * power on default, so let's leave them alone. - * So, let's just read the board rev! - */ - raw = inb_p(SIO_GP_DATA1); - raw &= 0x7f; /* 7 bits of valid board revision ID. */ - - if (visws_board_type == VISWS_320) { - if (raw < 0x6) { - visws_board_rev = 4; - } else if (raw < 0xc) { - visws_board_rev = 5; - } else { - visws_board_rev = 6; - } - } else if (visws_board_type == VISWS_540) { - visws_board_rev = 2; - } else { - visws_board_rev = raw; - } - - printk(KERN_INFO "Silicon Graphics Visual Workstation %s (rev %d) detected\n", - (visws_board_type == VISWS_320 ? "320" : - (visws_board_type == VISWS_540 ? "540" : - "unknown")), visws_board_rev); -} - -#define A01234 (LI_INTA_0 | LI_INTA_1 | LI_INTA_2 | LI_INTA_3 | LI_INTA_4) -#define BCD (LI_INTB | LI_INTC | LI_INTD) -#define ALLDEVS (A01234 | BCD) - -static __init void lithium_init(void) -{ - set_fixmap(FIX_LI_PCIA, LI_PCI_A_PHYS); - set_fixmap(FIX_LI_PCIB, LI_PCI_B_PHYS); - - if ((li_pcia_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) || - (li_pcia_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) { - printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'A'); -/* panic("This machine is not SGI Visual Workstation 320/540"); */ - } - - if ((li_pcib_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) || - (li_pcib_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) { - printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'B'); -/* panic("This machine is not SGI Visual Workstation 320/540"); */ - } - - li_pcia_write16(LI_PCI_INTEN, ALLDEVS); - li_pcib_write16(LI_PCI_INTEN, ALLDEVS); -} - -static __init void cobalt_init(void) -{ - /* - * On normal SMP PC this is used only with SMP, but we have to - * use it and set it up here to start the Cobalt clock - */ - set_fixmap(FIX_APIC_BASE, APIC_DEFAULT_PHYS_BASE); - setup_local_APIC(); - printk(KERN_INFO "Local APIC Version %#x, ID %#x\n", - (unsigned int)apic_read(APIC_LVR), - (unsigned int)apic_read(APIC_ID)); - - set_fixmap(FIX_CO_CPU, CO_CPU_PHYS); - set_fixmap(FIX_CO_APIC, CO_APIC_PHYS); - printk(KERN_INFO "Cobalt Revision %#lx, APIC ID %#lx\n", - co_cpu_read(CO_CPU_REV), co_apic_read(CO_APIC_ID)); - - /* Enable Cobalt APIC being careful to NOT change the ID! */ - co_apic_write(CO_APIC_ID, co_apic_read(CO_APIC_ID) | CO_APIC_ENABLE); - - printk(KERN_INFO "Cobalt APIC enabled: ID reg %#lx\n", - co_apic_read(CO_APIC_ID)); -} - -static void __init visws_trap_init(void) -{ - lithium_init(); - cobalt_init(); -} - -/* - * IRQ controller / APIC support: - */ - -static DEFINE_SPINLOCK(cobalt_lock); - -/* - * Set the given Cobalt APIC Redirection Table entry to point - * to the given IDT vector/index. - */ -static inline void co_apic_set(int entry, int irq) -{ - co_apic_write(CO_APIC_LO(entry), CO_APIC_LEVEL | (irq + FIRST_EXTERNAL_VECTOR)); - co_apic_write(CO_APIC_HI(entry), 0); -} - -/* - * Cobalt (IO)-APIC functions to handle PCI devices. - */ -static inline int co_apic_ide0_hack(void) -{ - extern char visws_board_type; - extern char visws_board_rev; - - if (visws_board_type == VISWS_320 && visws_board_rev == 5) - return 5; - return CO_APIC_IDE0; -} - -static int is_co_apic(unsigned int irq) -{ - if (IS_CO_APIC(irq)) - return CO_APIC(irq); - - switch (irq) { - case 0: return CO_APIC_CPU; - case CO_IRQ_IDE0: return co_apic_ide0_hack(); - case CO_IRQ_IDE1: return CO_APIC_IDE1; - default: return -1; - } -} - - -/* - * This is the SGI Cobalt (IO-)APIC: - */ -static void enable_cobalt_irq(struct irq_data *data) -{ - co_apic_set(is_co_apic(data->irq), data->irq); -} - -static void disable_cobalt_irq(struct irq_data *data) -{ - int entry = is_co_apic(data->irq); - - co_apic_write(CO_APIC_LO(entry), CO_APIC_MASK); - co_apic_read(CO_APIC_LO(entry)); -} - -static void ack_cobalt_irq(struct irq_data *data) -{ - unsigned long flags; - - spin_lock_irqsave(&cobalt_lock, flags); - disable_cobalt_irq(data); - apic_write(APIC_EOI, APIC_EOI_ACK); - spin_unlock_irqrestore(&cobalt_lock, flags); -} - -static struct irq_chip cobalt_irq_type = { - .name = "Cobalt-APIC", - .irq_enable = enable_cobalt_irq, - .irq_disable = disable_cobalt_irq, - .irq_ack = ack_cobalt_irq, -}; - - -/* - * This is the PIIX4-based 8259 that is wired up indirectly to Cobalt - * -- not the manner expected by the code in i8259.c. - * - * there is a 'master' physical interrupt source that gets sent to - * the CPU. But in the chipset there are various 'virtual' interrupts - * waiting to be handled. We represent this to Linux through a 'master' - * interrupt controller type, and through a special virtual interrupt- - * controller. Device drivers only see the virtual interrupt sources. - */ -static unsigned int startup_piix4_master_irq(struct irq_data *data) -{ - legacy_pic->init(0); - enable_cobalt_irq(data); - return 0; -} - -static struct irq_chip piix4_master_irq_type = { - .name = "PIIX4-master", - .irq_startup = startup_piix4_master_irq, - .irq_ack = ack_cobalt_irq, -}; - -static void pii4_mask(struct irq_data *data) { } - -static struct irq_chip piix4_virtual_irq_type = { - .name = "PIIX4-virtual", - .irq_mask = pii4_mask, -}; - -/* - * PIIX4-8259 master/virtual functions to handle interrupt requests - * from legacy devices: floppy, parallel, serial, rtc. - * - * None of these get Cobalt APIC entries, neither do they have IDT - * entries. These interrupts are purely virtual and distributed from - * the 'master' interrupt source: CO_IRQ_8259. - * - * When the 8259 interrupts its handler figures out which of these - * devices is interrupting and dispatches to its handler. - * - * CAREFUL: devices see the 'virtual' interrupt only. Thus disable/ - * enable_irq gets the right irq. This 'master' irq is never directly - * manipulated by any driver. - */ -static irqreturn_t piix4_master_intr(int irq, void *dev_id) -{ - unsigned long flags; - int realirq; - - raw_spin_lock_irqsave(&i8259A_lock, flags); - - /* Find out what's interrupting in the PIIX4 master 8259 */ - outb(0x0c, 0x20); /* OCW3 Poll command */ - realirq = inb(0x20); - - /* - * Bit 7 == 0 means invalid/spurious - */ - if (unlikely(!(realirq & 0x80))) - goto out_unlock; - - realirq &= 7; - - if (unlikely(realirq == 2)) { - outb(0x0c, 0xa0); - realirq = inb(0xa0); - - if (unlikely(!(realirq & 0x80))) - goto out_unlock; - - realirq = (realirq & 7) + 8; - } - - /* mask and ack interrupt */ - cached_irq_mask |= 1 << realirq; - if (unlikely(realirq > 7)) { - inb(0xa1); - outb(cached_slave_mask, 0xa1); - outb(0x60 + (realirq & 7), 0xa0); - outb(0x60 + 2, 0x20); - } else { - inb(0x21); - outb(cached_master_mask, 0x21); - outb(0x60 + realirq, 0x20); - } - - raw_spin_unlock_irqrestore(&i8259A_lock, flags); - - /* - * handle this 'virtual interrupt' as a Cobalt one now. - */ - generic_handle_irq(realirq); - - return IRQ_HANDLED; - -out_unlock: - raw_spin_unlock_irqrestore(&i8259A_lock, flags); - return IRQ_NONE; -} - -static struct irqaction master_action = { - .handler = piix4_master_intr, - .name = "PIIX4-8259", - .flags = IRQF_NO_THREAD, -}; - -static struct irqaction cascade_action = { - .handler = no_action, - .name = "cascade", - .flags = IRQF_NO_THREAD, -}; - -static inline void set_piix4_virtual_irq_type(void) -{ - piix4_virtual_irq_type.irq_enable = i8259A_chip.irq_unmask; - piix4_virtual_irq_type.irq_disable = i8259A_chip.irq_mask; - piix4_virtual_irq_type.irq_unmask = i8259A_chip.irq_unmask; -} - -static void __init visws_pre_intr_init(void) -{ - int i; - - set_piix4_virtual_irq_type(); - - for (i = 0; i < CO_IRQ_APIC0 + CO_APIC_LAST + 1; i++) { - struct irq_chip *chip = NULL; - - if (i == 0) - chip = &cobalt_irq_type; - else if (i == CO_IRQ_IDE0) - chip = &cobalt_irq_type; - else if (i == CO_IRQ_IDE1) - chip = &cobalt_irq_type; - else if (i == CO_IRQ_8259) - chip = &piix4_master_irq_type; - else if (i < CO_IRQ_APIC0) - chip = &piix4_virtual_irq_type; - else if (IS_CO_APIC(i)) - chip = &cobalt_irq_type; - - if (chip) - irq_set_chip(i, chip); - } - - setup_irq(CO_IRQ_8259, &master_action); - setup_irq(2, &cascade_action); -} diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig index 01b90261fa38..9c50cc2e403b 100644 --- a/arch/x86/xen/Kconfig +++ b/arch/x86/xen/Kconfig @@ -7,7 +7,7 @@ config XEN depends on PARAVIRT select PARAVIRT_CLOCK select XEN_HAVE_PVMMU - depends on X86_64 || (X86_32 && X86_PAE && !X86_VISWS) + depends on X86_64 || (X86_32 && X86_PAE) depends on X86_TSC help This is the Linux Xen port. Enabling this will allow the |