diff options
Diffstat (limited to 'arch')
35 files changed, 947 insertions, 1517 deletions
diff --git a/arch/sh/boards/landisk/Makefile b/arch/sh/boards/landisk/Makefile index 60e75c6db0eb..89e4beb2ad47 100644 --- a/arch/sh/boards/landisk/Makefile +++ b/arch/sh/boards/landisk/Makefile @@ -3,5 +3,3 @@ # obj-y := setup.o io.o irq.o rtc.o landisk_pwb.o - -obj-$(CONFIG_PCI) += pci.o diff --git a/arch/sh/boards/landisk/io.c b/arch/sh/boards/landisk/io.c index aa6b145c9e8f..92498b4947d5 100644 --- a/arch/sh/boards/landisk/io.c +++ b/arch/sh/boards/landisk/io.c @@ -14,39 +14,16 @@ * modifed by kogiidena * 2005.03.03 */ - #include <linux/kernel.h> #include <linux/types.h> +#include <linux/pci.h> #include <asm/landisk/iodata_landisk.h> #include <asm/addrspace.h> #include <asm/io.h> -#include <linux/module.h> -#include <linux/pci.h> -#include "../../drivers/pci/pci-sh7751.h" - extern void *area5_io_base; /* Area 5 I/O Base address */ extern void *area6_io_base; /* Area 6 I/O Base address */ -/* - * The 7751R LANDISK uses the built-in PCI controller (PCIC) - * of the 7751R processor, and has a SuperIO accessible via the PCI. - * The board also includes a PCMCIA controller on its memory bus, - * like the other Solution Engine boards. - */ - -#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR) -#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR) -#define PCI_IO_AREA SH7751_PCI_IO_BASE -#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE - -#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK)) - -static inline void delay(void) -{ - ctrl_inw(0xa0000000); -} - static inline unsigned long port2adr(unsigned int port) { if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) @@ -67,17 +44,6 @@ static inline unsigned long port2adr(unsigned int port) return port; } -/* In case someone configures the kernel w/o PCI support: in that */ -/* scenario, don't ever bother to check for PCI-window addresses */ - -/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */ -#if defined(CONFIG_PCI) -#define CHECK_SH7751_PCIIO(port) \ - ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE))) -#else -#define CHECK_SH_7751_PCIIO(port) (0) -#endif - /* * General outline: remap really low stuff [eventually] to SuperIO, * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) @@ -89,8 +55,8 @@ u8 landisk_inb(unsigned long port) { if (PXSEG(port)) return ctrl_inb(port); - else if (CHECK_SH7751_PCIIO(port)) - return ctrl_inb(PCI_IOMAP(port)); + else if (is_pci_ioaddr(port)) + return ctrl_inb(pci_ioaddr(port)); return ctrl_inw(port2adr(port)) & 0xff; } @@ -101,12 +67,12 @@ u8 landisk_inb_p(unsigned long port) if (PXSEG(port)) v = ctrl_inb(port); - else if (CHECK_SH7751_PCIIO(port)) - v = ctrl_inb(PCI_IOMAP(port)); + else if (is_pci_ioaddr(port)) + v = ctrl_inb(pci_ioaddr(port)); else v = ctrl_inw(port2adr(port)) & 0xff; - delay(); + ctrl_delay(); return v; } @@ -115,8 +81,8 @@ u16 landisk_inw(unsigned long port) { if (PXSEG(port)) return ctrl_inw(port); - else if (CHECK_SH7751_PCIIO(port)) - return ctrl_inw(PCI_IOMAP(port)); + else if (is_pci_ioaddr(port)) + return ctrl_inw(pci_ioaddr(port)); else maybebadio(port); @@ -127,8 +93,8 @@ u32 landisk_inl(unsigned long port) { if (PXSEG(port)) return ctrl_inl(port); - else if (CHECK_SH7751_PCIIO(port)) - return ctrl_inl(PCI_IOMAP(port)); + else if (is_pci_ioaddr(port)) + return ctrl_inl(pci_ioaddr(port)); else maybebadio(port); @@ -139,8 +105,8 @@ void landisk_outb(u8 value, unsigned long port) { if (PXSEG(port)) ctrl_outb(value, port); - else if (CHECK_SH7751_PCIIO(port)) - ctrl_outb(value, PCI_IOMAP(port)); + else if (is_pci_ioaddr(port)) + ctrl_outb(value, pci_ioaddr(port)); else ctrl_outw(value, port2adr(port)); } @@ -149,19 +115,19 @@ void landisk_outb_p(u8 value, unsigned long port) { if (PXSEG(port)) ctrl_outb(value, port); - else if (CHECK_SH7751_PCIIO(port)) - ctrl_outb(value, PCI_IOMAP(port)); + else if (is_pci_ioaddr(port)) + ctrl_outb(value, pci_ioaddr(port)); else ctrl_outw(value, port2adr(port)); - delay(); + ctrl_delay(); } void landisk_outw(u16 value, unsigned long port) { if (PXSEG(port)) ctrl_outw(value, port); - else if (CHECK_SH7751_PCIIO(port)) - ctrl_outw(value, PCI_IOMAP(port)); + else if (is_pci_ioaddr(port)) + ctrl_outw(value, pci_ioaddr(port)); else maybebadio(port); } @@ -170,8 +136,8 @@ void landisk_outl(u32 value, unsigned long port) { if (PXSEG(port)) ctrl_outl(value, port); - else if (CHECK_SH7751_PCIIO(port)) - ctrl_outl(value, PCI_IOMAP(port)); + else if (is_pci_ioaddr(port)) + ctrl_outl(value, pci_ioaddr(port)); else maybebadio(port); } @@ -184,8 +150,8 @@ void landisk_insb(unsigned long port, void *dst, unsigned long count) if (PXSEG(port)) { while (count--) *buf++ = *(volatile u8 *)port; - } else if (CHECK_SH7751_PCIIO(port)) { - volatile u8 *bp = (volatile u8 *)PCI_IOMAP(port); + } else if (is_pci_ioaddr(port)) { + volatile u8 *bp = (volatile u8 *)pci_ioaddr(port); while (count--) *buf++ = *bp; @@ -203,8 +169,8 @@ void landisk_insw(unsigned long port, void *dst, unsigned long count) if (PXSEG(port)) p = (volatile u16 *)port; - else if (CHECK_SH7751_PCIIO(port)) - p = (volatile u16 *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + p = (volatile u16 *)pci_ioaddr(port); else p = (volatile u16 *)port2adr(port); while (count--) @@ -215,8 +181,8 @@ void landisk_insl(unsigned long port, void *dst, unsigned long count) { u32 *buf = dst; - if (CHECK_SH7751_PCIIO(port)) { - volatile u32 *p = (volatile u32 *)PCI_IOMAP(port); + if (is_pci_ioaddr(port)) { + volatile u32 *p = (volatile u32 *)pci_ioaddr(port); while (count--) *buf++ = *p; @@ -232,8 +198,8 @@ void landisk_outsb(unsigned long port, const void *src, unsigned long count) if (PXSEG(port)) while (count--) ctrl_outb(*buf++, port); - else if (CHECK_SH7751_PCIIO(port)) { - volatile u8 *bp = (volatile u8 *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) { + volatile u8 *bp = (volatile u8 *)pci_ioaddr(port); while (count--) *bp = *buf++; @@ -251,8 +217,8 @@ void landisk_outsw(unsigned long port, const void *src, unsigned long count) if (PXSEG(port)) p = (volatile u16 *)port; - else if (CHECK_SH7751_PCIIO(port)) - p = (volatile u16 *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + p = (volatile u16 *)pci_ioaddr(port); else p = (volatile u16 *)port2adr(port); @@ -264,8 +230,8 @@ void landisk_outsl(unsigned long port, const void *src, unsigned long count) { const u32 *buf = src; - if (CHECK_SH7751_PCIIO(port)) { - volatile u32 *p = (volatile u32 *)PCI_IOMAP(port); + if (is_pci_ioaddr(port)) { + volatile u32 *p = (volatile u32 *)pci_ioaddr(port); while (count--) *p = *buf++; @@ -277,8 +243,8 @@ void __iomem *landisk_ioport_map(unsigned long port, unsigned int size) { if (PXSEG(port)) return (void __iomem *)port; - else if (CHECK_SH7751_PCIIO(port)) - return (void __iomem *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + return (void __iomem *)pci_ioaddr(port); return (void __iomem *)port2adr(port); } diff --git a/arch/sh/boards/mpc1211/setup.c b/arch/sh/boards/mpc1211/setup.c index 2bfb221cc35c..a8c5180ae219 100644 --- a/arch/sh/boards/mpc1211/setup.c +++ b/arch/sh/boards/mpc1211/setup.c @@ -255,23 +255,12 @@ void __init init_mpc1211_IRQ(void) } } -/* - Initialize the board -*/ - - -static void delay (void) -{ - volatile unsigned short tmp; - tmp = *(volatile unsigned short *) 0xa0000000; -} - -static void delay1000 (void) +static void delay1000(void) { int i; for (i=0; i<1000; i++) - delay (); + ctrl_delay(); } static int put_smb_blk(unsigned char *p, int address, int command, int no) diff --git a/arch/sh/boards/renesas/hs7751rvoip/io.c b/arch/sh/boards/renesas/hs7751rvoip/io.c index ecdce7ef6a34..8c26550ca2e4 100644 --- a/arch/sh/boards/renesas/hs7751rvoip/io.c +++ b/arch/sh/boards/renesas/hs7751rvoip/io.c @@ -13,14 +13,11 @@ #include <linux/kernel.h> #include <linux/types.h> +#include <linux/module.h> #include <asm/io.h> #include <asm/hs7751rvoip/hs7751rvoip.h> #include <asm/addrspace.h> -#include <linux/module.h> -#include <linux/pci.h> -#include "../../../drivers/pci/pci-sh7751.h" - extern void *area6_io8_base; /* Area 6 8bit I/O Base address */ extern void *area5_io16_base; /* Area 5 16bit I/O Base address */ @@ -31,27 +28,17 @@ extern void *area5_io16_base; /* Area 5 16bit I/O Base address */ * like the other Solution Engine boards. */ -#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR) -#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR) -#define PCI_IO_AREA SH7751_PCI_IO_BASE -#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE -#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK)) - #define CODEC_IO_BASE 0x1000 #define CODEC_IOMAP(a) ((unsigned long)area6_io8_base + ((a) - CODEC_IO_BASE)) -static inline void delay(void) -{ - ctrl_inw(0xa0000000); -} - static inline unsigned long port2adr(unsigned int port) { if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) if (port == 0x3f6) return ((unsigned long)area5_io16_base + 0x0c); else - return ((unsigned long)area5_io16_base + 0x800 + ((port-0x1f0) << 1)); + return ((unsigned long)area5_io16_base + 0x800 + + ((port-0x1f0) << 1)); else maybebadio((unsigned long)port); return port; @@ -70,25 +57,10 @@ static inline int shifted_port(unsigned long port) } #if defined(CONFIG_HS7751RVOIP_CODEC) -static inline int -codec_port(unsigned long port) -{ - if (CODEC_IO_BASE <= port && port < (CODEC_IO_BASE+0x20)) - return 1; - else - return 0; -} -#endif - -/* In case someone configures the kernel w/o PCI support: in that */ -/* scenario, don't ever bother to check for PCI-window addresses */ - -/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */ -#if defined(CONFIG_PCI) -#define CHECK_SH7751_PCIIO(port) \ - ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE))) +#define codec_port(port) \ + ((CODEC_IO_BASE <= (port)) && ((port) < (CODEC_IO_BASE + 0x20))) #else -#define CHECK_SH7751_PCIIO(port) (0) +#define codec_port(port) (0) #endif /* @@ -102,12 +74,10 @@ unsigned char hs7751rvoip_inb(unsigned long port) { if (PXSEG(port)) return ctrl_inb(port); -#if defined(CONFIG_HS7751RVOIP_CODEC) else if (codec_port(port)) return ctrl_inb(CODEC_IOMAP(port)); -#endif - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - return ctrl_inb(PCI_IOMAP(port)); + else if (is_pci_ioaddr(port) || shifted_port(port)) + return ctrl_inb(pci_ioaddr(port)); else return ctrl_inw(port2adr(port)) & 0xff; } @@ -118,15 +88,13 @@ unsigned char hs7751rvoip_inb_p(unsigned long port) if (PXSEG(port)) v = ctrl_inb(port); -#if defined(CONFIG_HS7751RVOIP_CODEC) else if (codec_port(port)) v = ctrl_inb(CODEC_IOMAP(port)); -#endif - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - v = ctrl_inb(PCI_IOMAP(port)); + else if (is_pci_ioaddr(port) || shifted_port(port)) + v = ctrl_inb(pci_ioaddr(port)); else v = ctrl_inw(port2adr(port)) & 0xff; - delay(); + ctrl_delay(); return v; } @@ -134,8 +102,8 @@ unsigned short hs7751rvoip_inw(unsigned long port) { if (PXSEG(port)) return ctrl_inw(port); - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - return ctrl_inw(PCI_IOMAP(port)); + else if (is_pci_ioaddr(port) || shifted_port(port)) + return ctrl_inw(pci_ioaddr(port)); else maybebadio(port); return 0; @@ -145,8 +113,8 @@ unsigned int hs7751rvoip_inl(unsigned long port) { if (PXSEG(port)) return ctrl_inl(port); - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - return ctrl_inl(PCI_IOMAP(port)); + else if (is_pci_ioaddr(port) || shifted_port(port)) + return ctrl_inl(pci_ioaddr(port)); else maybebadio(port); return 0; @@ -157,12 +125,10 @@ void hs7751rvoip_outb(unsigned char value, unsigned long port) if (PXSEG(port)) ctrl_outb(value, port); -#if defined(CONFIG_HS7751RVOIP_CODEC) else if (codec_port(port)) ctrl_outb(value, CODEC_IOMAP(port)); -#endif - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - ctrl_outb(value, PCI_IOMAP(port)); + else if (is_pci_ioaddr(port) || shifted_port(port)) + ctrl_outb(value, pci_ioaddr(port)); else ctrl_outb(value, port2adr(port)); } @@ -171,24 +137,22 @@ void hs7751rvoip_outb_p(unsigned char value, unsigned long port) { if (PXSEG(port)) ctrl_outb(value, port); -#if defined(CONFIG_HS7751RVOIP_CODEC) else if (codec_port(port)) ctrl_outb(value, CODEC_IOMAP(port)); -#endif - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - ctrl_outb(value, PCI_IOMAP(port)); + else if (is_pci_ioaddr(port) || shifted_port(port)) + ctrl_outb(value, pci_ioaddr(port)); else ctrl_outw(value, port2adr(port)); - delay(); + ctrl_delay(); } void hs7751rvoip_outw(unsigned short value, unsigned long port) { if (PXSEG(port)) ctrl_outw(value, port); - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - ctrl_outw(value, PCI_IOMAP(port)); + else if (is_pci_ioaddr(port) || shifted_port(port)) + ctrl_outw(value, pci_ioaddr(port)); else maybebadio(port); } @@ -197,8 +161,8 @@ void hs7751rvoip_outl(unsigned int value, unsigned long port) { if (PXSEG(port)) ctrl_outl(value, port); - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - ctrl_outl(value, PCI_IOMAP(port)); + else if (is_pci_ioaddr(port) || shifted_port(port)) + ctrl_outl(value, pci_ioaddr(port)); else maybebadio(port); } @@ -210,13 +174,11 @@ void hs7751rvoip_insb(unsigned long port, void *addr, unsigned long count) if (PXSEG(port)) while (count--) *buf++ = ctrl_inb(port); -#if defined(CONFIG_HS7751RVOIP_CODEC) else if (codec_port(port)) while (count--) *buf++ = ctrl_inb(CODEC_IOMAP(port)); -#endif - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) { - volatile u8 *bp = (volatile u8 *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) { + volatile u8 *bp = (volatile u8 *)pci_ioaddr(port); while (count--) *buf++ = *bp; @@ -235,8 +197,8 @@ void hs7751rvoip_insw(unsigned long port, void *addr, unsigned long count) if (PXSEG(port)) p = (volatile u16 *)port; - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - p = (volatile u16 *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) + p = (volatile u16 *)pci_ioaddr(port); else p = (volatile u16 *)port2adr(port); while (count--) @@ -246,8 +208,8 @@ void hs7751rvoip_insw(unsigned long port, void *addr, unsigned long count) void hs7751rvoip_insl(unsigned long port, void *addr, unsigned long count) { - if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) { - volatile u32 *p = (volatile u32 *)PCI_IOMAP(port); + if (is_pci_ioaddr(port) || shifted_port(port)) { + volatile u32 *p = (volatile u32 *)pci_ioaddr(port); u32 *buf = addr; while (count--) @@ -263,13 +225,11 @@ void hs7751rvoip_outsb(unsigned long port, const void *addr, unsigned long count if (PXSEG(port)) while (count--) ctrl_outb(*buf++, port); -#if defined(CONFIG_HS7751RVOIP_CODEC) else if (codec_port(port)) while (count--) ctrl_outb(*buf++, CODEC_IOMAP(port)); -#endif - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) { - volatile u8 *bp = (volatile u8 *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) { + volatile u8 *bp = (volatile u8 *)pci_ioaddr(port); while (count--) *bp = *buf++; @@ -288,8 +248,8 @@ void hs7751rvoip_outsw(unsigned long port, const void *addr, unsigned long count if (PXSEG(port)) p = (volatile u16 *)port; - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - p = (volatile u16 *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) + p = (volatile u16 *)pci_ioaddr(port); else p = (volatile u16 *)port2adr(port); @@ -301,8 +261,8 @@ void hs7751rvoip_outsl(unsigned long port, const void *addr, unsigned long count { const u32 *buf = addr; - if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) { - volatile u32 *p = (volatile u32 *)PCI_IOMAP(port); + if (is_pci_ioaddr(port) || shifted_port(port)) { + volatile u32 *p = (volatile u32 *)pci_ioaddr(port); while (count--) *p = *buf++; @@ -316,8 +276,8 @@ void __iomem *hs7751rvoip_ioport_map(unsigned long port, unsigned int size) return (void __iomem *)port; else if (unlikely(codec_port(port) && (size == 1))) return (void __iomem *)CODEC_IOMAP(port); - else if (CHECK_SH7751_PCIIO(port)) - return (void __iomem *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + return (void __iomem *)pci_ioaddr(port); return (void __iomem *)port2adr(port); } diff --git a/arch/sh/boards/renesas/r7780rp/io.c b/arch/sh/boards/renesas/r7780rp/io.c index f73ca3f0f5a1..db92d6e6ae99 100644 --- a/arch/sh/boards/renesas/r7780rp/io.c +++ b/arch/sh/boards/renesas/r7780rp/io.c @@ -1,6 +1,4 @@ /* - * linux/arch/sh/kernel/io_r7780rp.c - * * Copyright (C) 2001 Ian da Silva, Jeremy Siegel * Based largely on io_se.c. * @@ -10,37 +8,13 @@ * placeholder code from io_r7780rp.c left in with the * expectation of later SuperIO and PCMCIA access. */ - +#include <linux/pci.h> #include <linux/kernel.h> #include <linux/types.h> #include <asm/r7780rp/r7780rp.h> #include <asm/addrspace.h> #include <asm/io.h> -#include <linux/module.h> -#include <linux/pci.h> -#include "../../../drivers/pci/pci-sh7780.h" - -/* - * The 7780 R7780RP-1 uses the built-in PCI controller (PCIC) - * of the 7780 processor, and has a SuperIO accessible via the PCI. - * The board also includes a PCMCIA controller on its memory bus, - * like the other Solution Engine boards. - */ - -#define SH7780_PCIIOBR_MASK 0xFFFC0000 /* IO Space Mask */ -#define PCIIOBR (volatile long *)PCI_REG(SH7780_PCIIOBR) -#define PCIMBR (volatile long *)PCI_REG(SH7780_PCIMBR) -#define PCI_IO_AREA SH7780_PCI_IO_BASE -#define PCI_MEM_AREA SH7780_PCI_CONFIG_BASE - -#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7780_PCIIOBR_MASK)) - -static inline void delay(void) -{ - ctrl_inw(0xa0000000); -} - static inline unsigned long port2adr(unsigned int port) { if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) @@ -78,17 +52,6 @@ static inline int shifted_port(unsigned long port) return 1; } -/* In case someone configures the kernel w/o PCI support: in that */ -/* scenario, don't ever bother to check for PCI-window addresses */ - -/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */ -#if defined(CONFIG_PCI) -#define CHECK_SH7780_PCIIO(port) \ - ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7780_PCI_IO_SIZE))) -#else -#define CHECK_SH7780_PCIIO(port) (0) -#endif - #if defined(CONFIG_NE2000) || defined(CONFIG_NE2000_MODULE) #define CHECK_AX88796L_PORT(port) \ ((port >= AX88796L_IO_BASE) && (port < (AX88796L_IO_BASE+0x20))) @@ -109,8 +72,8 @@ u8 r7780rp_inb(unsigned long port) return ctrl_inw(port88796l(port, 0)) & 0xff; else if (PXSEG(port)) return ctrl_inb(port); - else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) - return ctrl_inb(PCI_IOMAP(port)); + else if (is_pci_ioaddr(port) || shifted_port(port)) + return ctrl_inb(pci_ioaddr(port)); return ctrl_inw(port2adr(port)) & 0xff; } @@ -123,12 +86,12 @@ u8 r7780rp_inb_p(unsigned long port) v = ctrl_inw(port88796l(port, 0)) & 0xff; else if (PXSEG(port)) v = ctrl_inb(port); - else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) - v = ctrl_inb(PCI_IOMAP(port)); + else if (is_pci_ioaddr(port) || shifted_port(port)) + v = ctrl_inb(pci_ioaddr(port)); else v = ctrl_inw(port2adr(port)) & 0xff; - delay(); + ctrl_delay(); return v; } @@ -139,8 +102,8 @@ u16 r7780rp_inw(unsigned long port) maybebadio(port); else if (PXSEG(port)) return ctrl_inw(port); - else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) - return ctrl_inw(PCI_IOMAP(port)); + else if (is_pci_ioaddr(port) || shifted_port(port)) + return ctrl_inw(pci_ioaddr(port)); else maybebadio(port); @@ -153,8 +116,8 @@ u32 r7780rp_inl(unsigned long port) maybebadio(port); else if (PXSEG(port)) return ctrl_inl(port); - else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) - return ctrl_inl(PCI_IOMAP(port)); + else if (is_pci_ioaddr(port) || shifted_port(port)) + return ctrl_inl(pci_ioaddr(port)); else maybebadio(port); @@ -167,8 +130,8 @@ void r7780rp_outb(u8 value, unsigned long port) ctrl_outw(value, port88796l(port, 0)); else if (PXSEG(port)) ctrl_outb(value, port); - else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) - ctrl_outb(value, PCI_IOMAP(port)); + else if (is_pci_ioaddr(port) || shifted_port(port)) + ctrl_outb(value, pci_ioaddr(port)); else ctrl_outw(value, port2adr(port)); } @@ -179,12 +142,12 @@ void r7780rp_outb_p(u8 value, unsigned long port) ctrl_outw(value, port88796l(port, 0)); else if (PXSEG(port)) ctrl_outb(value, port); - else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) - ctrl_outb(value, PCI_IOMAP(port)); + else if (is_pci_ioaddr(port) || shifted_port(port)) + ctrl_outb(value, pci_ioaddr(port)); else ctrl_outw(value, port2adr(port)); - delay(); + ctrl_delay(); } void r7780rp_outw(u16 value, unsigned long port) @@ -193,8 +156,8 @@ void r7780rp_outw(u16 value, unsigned long port) maybebadio(port); else if (PXSEG(port)) ctrl_outw(value, port); - else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) - ctrl_outw(value, PCI_IOMAP(port)); + else if (is_pci_ioaddr(port) || shifted_port(port)) + ctrl_outw(value, pci_ioaddr(port)); else maybebadio(port); } @@ -205,8 +168,8 @@ void r7780rp_outl(u32 value, unsigned long port) maybebadio(port); else if (PXSEG(port)) ctrl_outl(value, port); - else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) - ctrl_outl(value, PCI_IOMAP(port)); + else if (is_pci_ioaddr(port) || shifted_port(port)) + ctrl_outl(value, pci_ioaddr(port)); else maybebadio(port); } @@ -223,8 +186,8 @@ void r7780rp_insb(unsigned long port, void *dst, unsigned long count) } else if (PXSEG(port)) { while (count--) *buf++ = *(volatile u8 *)port; - } else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) { - volatile u8 *bp = (volatile u8 *)PCI_IOMAP(port); + } else if (is_pci_ioaddr(port) || shifted_port(port)) { + volatile u8 *bp = (volatile u8 *)pci_ioaddr(port); while (count--) *buf++ = *bp; @@ -244,8 +207,8 @@ void r7780rp_insw(unsigned long port, void *dst, unsigned long count) p = (volatile u16 *)port88796l(port, 1); else if (PXSEG(port)) p = (volatile u16 *)port; - else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) - p = (volatile u16 *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) + p = (volatile u16 *)pci_ioaddr(port); else p = (volatile u16 *)port2adr(port); @@ -259,8 +222,8 @@ void r7780rp_insl(unsigned long port, void *dst, unsigned long count) if (CHECK_AX88796L_PORT(port)) maybebadio(port); - else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) { - volatile u32 *p = (volatile u32 *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) { + volatile u32 *p = (volatile u32 *)pci_ioaddr(port); while (count--) *buf++ = *p; @@ -280,8 +243,8 @@ void r7780rp_outsb(unsigned long port, const void *src, unsigned long count) } else if (PXSEG(port)) while (count--) ctrl_outb(*buf++, port); - else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) { - volatile u8 *bp = (volatile u8 *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) { + volatile u8 *bp = (volatile u8 *)pci_ioaddr(port); while (count--) *bp = *buf++; @@ -301,8 +264,8 @@ void r7780rp_outsw(unsigned long port, const void *src, unsigned long count) p = (volatile u16 *)port88796l(port, 1); else if (PXSEG(port)) p = (volatile u16 *)port; - else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) - p = (volatile u16 *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) + p = (volatile u16 *)pci_ioaddr(port); else p = (volatile u16 *)port2adr(port); @@ -316,8 +279,8 @@ void r7780rp_outsl(unsigned long port, const void *src, unsigned long count) if (CHECK_AX88796L_PORT(port)) maybebadio(port); - else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) { - volatile u32 *p = (volatile u32 *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) { + volatile u32 *p = (volatile u32 *)pci_ioaddr(port); while (count--) *p = *buf++; @@ -331,8 +294,8 @@ void __iomem *r7780rp_ioport_map(unsigned long port, unsigned int size) return (void __iomem *)port88796l(port, size > 1); else if (PXSEG(port)) return (void __iomem *)port; - else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) - return (void __iomem *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) + return (void __iomem *)pci_ioaddr(port); return (void __iomem *)port2adr(port); } diff --git a/arch/sh/boards/renesas/rts7751r2d/io.c b/arch/sh/boards/renesas/rts7751r2d/io.c index 8dc2a2e2e5df..135aa0b5e62d 100644 --- a/arch/sh/boards/renesas/rts7751r2d/io.c +++ b/arch/sh/boards/renesas/rts7751r2d/io.c @@ -1,6 +1,4 @@ /* - * linux/arch/sh/kernel/io_rts7751r2d.c - * * Copyright (C) 2001 Ian da Silva, Jeremy Siegel * Based largely on io_se.c. * @@ -10,11 +8,9 @@ * placeholder code from io_rts7751r2d.c left in with the * expectation of later SuperIO and PCMCIA access. */ - #include <linux/kernel.h> #include <linux/types.h> #include <linux/pci.h> -#include "../../../drivers/pci/pci-sh7751.h" #include <asm/rts7751r2d/rts7751r2d.h> #include <asm/io.h> #include <asm/addrspace.h> @@ -26,18 +22,6 @@ * like the other Solution Engine boards. */ -#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR) -#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR) -#define PCI_IO_AREA SH7751_PCI_IO_BASE -#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE - -#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK)) - -static inline void delay(void) -{ - ctrl_inw(0xa0000000); -} - static inline unsigned long port2adr(unsigned int port) { if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) @@ -75,17 +59,6 @@ static inline int shifted_port(unsigned long port) return 1; } -/* In case someone configures the kernel w/o PCI support: in that */ -/* scenario, don't ever bother to check for PCI-window addresses */ - -/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */ -#if defined(CONFIG_PCI) -#define CHECK_SH7751_PCIIO(port) \ - ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE))) -#else -#define CHECK_SH7751_PCIIO(port) (0) -#endif - #if defined(CONFIG_NE2000) || defined(CONFIG_NE2000_MODULE) #define CHECK_AX88796L_PORT(port) \ ((port >= AX88796L_IO_BASE) && (port < (AX88796L_IO_BASE+0x20))) @@ -106,8 +79,8 @@ unsigned char rts7751r2d_inb(unsigned long port) return (*(volatile unsigned short *)port88796l(port, 0)) & 0xff; else if (PXSEG(port)) return *(volatile unsigned char *)port; - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - return *(volatile unsigned char *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) + return *(volatile unsigned char *)pci_ioaddr(port); else return (*(volatile unsigned short *)port2adr(port) & 0xff); } @@ -120,11 +93,12 @@ unsigned char rts7751r2d_inb_p(unsigned long port) v = (*(volatile unsigned short *)port88796l(port, 0)) & 0xff; else if (PXSEG(port)) v = *(volatile unsigned char *)port; - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - v = *(volatile unsigned char *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) + v = *(volatile unsigned char *)pci_ioaddr(port); else v = (*(volatile unsigned short *)port2adr(port) & 0xff); - delay(); + + ctrl_delay(); return v; } @@ -135,8 +109,8 @@ unsigned short rts7751r2d_inw(unsigned long port) maybebadio(port); else if (PXSEG(port)) return *(volatile unsigned short *)port; - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - return *(volatile unsigned short *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) + return *(volatile unsigned short *)pci_ioaddr(port); else maybebadio(port); @@ -149,8 +123,8 @@ unsigned int rts7751r2d_inl(unsigned long port) maybebadio(port); else if (PXSEG(port)) return *(volatile unsigned long *)port; - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - return *(volatile unsigned long *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) + return *(volatile unsigned long *)pci_ioaddr(port); else maybebadio(port); @@ -163,8 +137,8 @@ void rts7751r2d_outb(unsigned char value, unsigned long port) *((volatile unsigned short *)port88796l(port, 0)) = value; else if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - *(volatile unsigned char *)PCI_IOMAP(port) = value; + else if (is_pci_ioaddr(port) || shifted_port(port)) + *(volatile unsigned char *)pci_ioaddr(port) = value; else *(volatile unsigned short *)port2adr(port) = value; } @@ -175,11 +149,12 @@ void rts7751r2d_outb_p(unsigned char value, unsigned long port) *((volatile unsigned short *)port88796l(port, 0)) = value; else if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - *(volatile unsigned char *)PCI_IOMAP(port) = value; + else if (is_pci_ioaddr(port) || shifted_port(port)) + *(volatile unsigned char *)pci_ioaddr(port) = value; else *(volatile unsigned short *)port2adr(port) = value; - delay(); + + ctrl_delay(); } void rts7751r2d_outw(unsigned short value, unsigned long port) @@ -188,8 +163,8 @@ void rts7751r2d_outw(unsigned short value, unsigned long port) maybebadio(port); else if (PXSEG(port)) *(volatile unsigned short *)port = value; - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - *(volatile unsigned short *)PCI_IOMAP(port) = value; + else if (is_pci_ioaddr(port) || shifted_port(port)) + *(volatile unsigned short *)pci_ioaddr(port) = value; else maybebadio(port); } @@ -200,8 +175,8 @@ void rts7751r2d_outl(unsigned int value, unsigned long port) maybebadio(port); else if (PXSEG(port)) *(volatile unsigned long *)port = value; - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - *(volatile unsigned long *)PCI_IOMAP(port) = value; + else if (is_pci_ioaddr(port) || shifted_port(port)) + *(volatile unsigned long *)pci_ioaddr(port) = value; else maybebadio(port); } @@ -219,8 +194,8 @@ void rts7751r2d_insb(unsigned long port, void *addr, unsigned long count) } else if (PXSEG(port)) while (count--) ctrl_outb(ctrl_inb(port), a++); - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) { - bp = (__u8 *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) { + bp = (__u8 *)pci_ioaddr(port); while (count--) ctrl_outb(*bp, a++); } else { @@ -239,8 +214,8 @@ void rts7751r2d_insw(unsigned long port, void *addr, unsigned long count) p = (volatile unsigned short *)port88796l(port, 1); else if (PXSEG(port)) p = (volatile unsigned short *)port; - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - p = (volatile unsigned short *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) + p = (volatile unsigned short *)pci_ioaddr(port); else p = (volatile unsigned short *)port2adr(port); while (count--) @@ -251,11 +226,11 @@ void rts7751r2d_insl(unsigned long port, void *addr, unsigned long count) { if (CHECK_AX88796L_PORT(port)) maybebadio(port); - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) { + else if (is_pci_ioaddr(port) || shifted_port(port)) { unsigned long a = (unsigned long)addr; while (count--) { - ctrl_outl(ctrl_inl(PCI_IOMAP(port)), a); + ctrl_outl(ctrl_inl(pci_ioaddr(port)), a); a += 4; } } else @@ -275,8 +250,8 @@ void rts7751r2d_outsb(unsigned long port, const void *addr, unsigned long count) } else if (PXSEG(port)) while (count--) ctrl_outb(a++, port); - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) { - bp = (__u8 *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) { + bp = (__u8 *)pci_ioaddr(port); while (count--) *bp = ctrl_inb(a++); } else { @@ -295,8 +270,8 @@ void rts7751r2d_outsw(unsigned long port, const void *addr, unsigned long count) p = (volatile unsigned short *)port88796l(port, 1); else if (PXSEG(port)) p = (volatile unsigned short *)port; - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) - p = (volatile unsigned short *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port) || shifted_port(port)) + p = (volatile unsigned short *)pci_ioaddr(port); else p = (volatile unsigned short *)port2adr(port); @@ -310,11 +285,11 @@ void rts7751r2d_outsl(unsigned long port, const void *addr, unsigned long count) { if (CHECK_AX88796L_PORT(port)) maybebadio(port); - else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) { + else if (is_pci_ioaddr(port) || shifted_port(port)) { unsigned long a = (unsigned long)addr; while (count--) { - ctrl_outl(ctrl_inl(a), PCI_IOMAP(port)); + ctrl_outl(ctrl_inl(a), pci_ioaddr(port)); a += 4; } } else diff --git a/arch/sh/boards/renesas/systemh/io.c b/arch/sh/boards/renesas/systemh/io.c index 0befd4f9894c..cde6e5d192c4 100644 --- a/arch/sh/boards/renesas/systemh/io.c +++ b/arch/sh/boards/renesas/systemh/io.c @@ -5,36 +5,16 @@ * Based largely on io_se.c. * * I/O routine for Hitachi 7751 Systemh. - * */ - #include <linux/kernel.h> #include <linux/types.h> #include <linux/pci.h> #include <asm/systemh7751.h> #include <asm/addrspace.h> #include <asm/io.h> -#include "../../../drivers/pci/pci-sh7751.h" - -/* - * The 7751 SystemH Engine uses the built-in PCI controller (PCIC) - * of the 7751 processor, and has a SuperIO accessible on its memory - * bus. - */ - -#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR) -#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR) -#define PCI_IO_AREA SH7751_PCI_IO_BASE -#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE -#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK)) #define ETHER_IOMAP(adr) (0xB3000000 + (adr)) /*map to 16bits access area of smc lan chip*/ -static inline void delay(void) -{ - ctrl_inw(0xa0000000); -} - static inline volatile __u16 * port2adr(unsigned int port) { @@ -44,17 +24,6 @@ port2adr(unsigned int port) return (volatile __u16*)port; } -/* In case someone configures the kernel w/o PCI support: in that */ -/* scenario, don't ever bother to check for PCI-window addresses */ - -/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */ -#if defined(CONFIG_PCI) -#define CHECK_SH7751_PCIIO(port) \ - ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE))) -#else -#define CHECK_SH7751_PCIIO(port) (0) -#endif - /* * General outline: remap really low stuff [eventually] to SuperIO, * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) @@ -66,8 +35,8 @@ unsigned char sh7751systemh_inb(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned char *)port; - else if (CHECK_SH7751_PCIIO(port)) - return *(volatile unsigned char *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + return *(volatile unsigned char *)pci_ioaddr(port); else if (port <= 0x3F1) return *(volatile unsigned char *)ETHER_IOMAP(port); else @@ -80,13 +49,13 @@ unsigned char sh7751systemh_inb_p(unsigned long port) if (PXSEG(port)) v = *(volatile unsigned char *)port; - else if (CHECK_SH7751_PCIIO(port)) - v = *(volatile unsigned char *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + v = *(volatile unsigned char *)pci_ioaddr(port); else if (port <= 0x3F1) v = *(volatile unsigned char *)ETHER_IOMAP(port); else v = (*port2adr(port))&0xff; - delay(); + ctrl_delay(); return v; } @@ -94,8 +63,8 @@ unsigned short sh7751systemh_inw(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned short *)port; - else if (CHECK_SH7751_PCIIO(port)) - return *(volatile unsigned short *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + return *(volatile unsigned short *)pci_ioaddr(port); else if (port >= 0x2000) return *port2adr(port); else if (port <= 0x3F1) @@ -109,8 +78,8 @@ unsigned int sh7751systemh_inl(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned long *)port; - else if (CHECK_SH7751_PCIIO(port)) - return *(volatile unsigned int *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + return *(volatile unsigned int *)pci_ioaddr(port); else if (port >= 0x2000) return *port2adr(port); else if (port <= 0x3F1) @@ -125,8 +94,8 @@ void sh7751systemh_outb(unsigned char value, unsigned long port) if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned char*)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned char*)pci_ioaddr(port)) = value; else if (port <= 0x3F1) *(volatile unsigned char *)ETHER_IOMAP(port) = value; else @@ -137,21 +106,21 @@ void sh7751systemh_outb_p(unsigned char value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned char*)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned char*)pci_ioaddr(port)) = value; else if (port <= 0x3F1) *(volatile unsigned char *)ETHER_IOMAP(port) = value; else *(port2adr(port)) = value; - delay(); + ctrl_delay(); } void sh7751systemh_outw(unsigned short value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned short *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned short *)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned short *)pci_ioaddr(port)) = value; else if (port >= 0x2000) *port2adr(port) = value; else if (port <= 0x3F1) @@ -164,8 +133,8 @@ void sh7751systemh_outl(unsigned int value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned long *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned long*)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned long*)pci_ioaddr(port)) = value; else maybebadio(port); } diff --git a/arch/sh/boards/se/770x/io.c b/arch/sh/boards/se/770x/io.c index 5102201c97ab..9941949331ab 100644 --- a/arch/sh/boards/se/770x/io.c +++ b/arch/sh/boards/se/770x/io.c @@ -1,4 +1,4 @@ -/* $Id: io.c,v 1.6 2006/01/04 17:53:54 lethal Exp $ +/* $Id: io.c,v 1.7 2006/02/05 21:55:29 lethal Exp $ * * linux/arch/sh/kernel/io_se.c * @@ -20,11 +20,6 @@ int sh_pcic_io_stop; int sh_pcic_io_type; int sh_pcic_io_dummy; -static inline void delay(void) -{ - ctrl_inw(0xa0000000); -} - /* MS7750 requires special versions of in*, out* routines, since PC-like io ports are located at upper half byte of 16-bit word which can be accessed only with 16-bit wide. */ @@ -72,7 +67,7 @@ unsigned char se_inb_p(unsigned long port) v = (*port2adr(port) >> 8); else v = (*port2adr(port))&0xff; - delay(); + ctrl_delay(); return v; } @@ -110,7 +105,7 @@ void se_outb_p(unsigned char value, unsigned long port) *(port2adr(port)) = value << 8; else *(port2adr(port)) = value; - delay(); + ctrl_delay(); } void se_outw(unsigned short value, unsigned long port) diff --git a/arch/sh/boards/se/7751/io.c b/arch/sh/boards/se/7751/io.c index 0e8a3ba48316..e8d846cec89d 100644 --- a/arch/sh/boards/se/7751/io.c +++ b/arch/sh/boards/se/7751/io.c @@ -1,6 +1,4 @@ /* - * linux/arch/sh/kernel/io_7751se.c - * * Copyright (C) 2001 Ian da Silva, Jeremy Siegel * Based largely on io_se.c. * @@ -10,55 +8,14 @@ * placeholder code from io_se.c left in with the * expectation of later SuperIO and PCMCIA access. */ - #include <linux/kernel.h> #include <linux/types.h> +#include <linux/pci.h> #include <asm/io.h> #include <asm/se7751.h> #include <asm/addrspace.h> -#include <linux/pci.h> -#include "../../../drivers/pci/pci-sh7751.h" - -#if 0 -/****************************************************************** - * Variables from io_se.c, related to PCMCIA (not PCI); we're not - * compiling them in, and have removed references from functions - * which follow. [Many checked for IO ports in the range bounded - * by sh_pcic_io_start/stop, and used sh_pcic_io_wbase as offset. - * As start/stop are uninitialized, only port 0x0 would match?] - * When used, remember to adjust names to avoid clash with io_se? - *****************************************************************/ -/* SH pcmcia io window base, start and end. */ -int sh_pcic_io_wbase = 0xb8400000; -int sh_pcic_io_start; -int sh_pcic_io_stop; -int sh_pcic_io_type; -int sh_pcic_io_dummy; -/*************************************************************/ -#endif - -/* - * The 7751 Solution Engine uses the built-in PCI controller (PCIC) - * of the 7751 processor, and has a SuperIO accessible via the PCI. - * The board also includes a PCMCIA controller on its memory bus, - * like the other Solution Engine boards. - */ - -#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR) -#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR) -#define PCI_IO_AREA SH7751_PCI_IO_BASE -#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE - -#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK)) - -static inline void delay(void) -{ - ctrl_inw(0xa0000000); -} - -static inline volatile __u16 * -port2adr(unsigned int port) +static inline volatile u16 *port2adr(unsigned int port) { if (port >= 0x2000) return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); @@ -66,32 +23,6 @@ port2adr(unsigned int port) return (volatile __u16*)port; } -#if 0 -/* The 7751 Solution Engine seems to have everything hooked */ -/* up pretty normally (nothing on high-bytes only...) so this */ -/* shouldn't be needed */ -static inline int -shifted_port(unsigned long port) -{ - /* For IDE registers, value is not shifted */ - if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) - return 0; - else - return 1; -} -#endif - -/* In case someone configures the kernel w/o PCI support: in that */ -/* scenario, don't ever bother to check for PCI-window addresses */ - -/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */ -#if defined(CONFIG_PCI) -#define CHECK_SH7751_PCIIO(port) \ - ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE))) -#else -#define CHECK_SH7751_PCIIO(port) (0) -#endif - /* * General outline: remap really low stuff [eventually] to SuperIO, * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) @@ -103,10 +34,10 @@ unsigned char sh7751se_inb(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned char *)port; - else if (CHECK_SH7751_PCIIO(port)) - return *(volatile unsigned char *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + return *(volatile unsigned char *)pci_ioaddr(port); else - return (*port2adr(port))&0xff; + return (*port2adr(port)) & 0xff; } unsigned char sh7751se_inb_p(unsigned long port) @@ -115,11 +46,11 @@ unsigned char sh7751se_inb_p(unsigned long port) if (PXSEG(port)) v = *(volatile unsigned char *)port; - else if (CHECK_SH7751_PCIIO(port)) - v = *(volatile unsigned char *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + v = *(volatile unsigned char *)pci_ioaddr(port); else - v = (*port2adr(port))&0xff; - delay(); + v = (*port2adr(port)) & 0xff; + ctrl_delay(); return v; } @@ -127,8 +58,8 @@ unsigned short sh7751se_inw(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned short *)port; - else if (CHECK_SH7751_PCIIO(port)) - return *(volatile unsigned short *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + return *(volatile unsigned short *)pci_ioaddr(port); else if (port >= 0x2000) return *port2adr(port); else @@ -140,8 +71,8 @@ unsigned int sh7751se_inl(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned long *)port; - else if (CHECK_SH7751_PCIIO(port)) - return *(volatile unsigned int *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + return *(volatile unsigned int *)pci_ioaddr(port); else if (port >= 0x2000) return *port2adr(port); else @@ -154,8 +85,8 @@ void sh7751se_outb(unsigned char value, unsigned long port) if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned char*)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned char*)pci_ioaddr(port)) = value; else *(port2adr(port)) = value; } @@ -164,19 +95,19 @@ void sh7751se_outb_p(unsigned char value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned char*)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned char*)pci_ioaddr(port)) = value; else *(port2adr(port)) = value; - delay(); + ctrl_delay(); } void sh7751se_outw(unsigned short value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned short *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned short *)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned short *)pci_ioaddr(port)) = value; else if (port >= 0x2000) *port2adr(port) = value; else @@ -187,8 +118,8 @@ void sh7751se_outl(unsigned int value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned long *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned long*)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned long*)pci_ioaddr(port)) = value; else maybebadio(port); } @@ -202,35 +133,3 @@ void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count) { maybebadio(port); } - -/* Map ISA bus address to the real address. Only for PCMCIA. */ - -/* ISA page descriptor. */ -static __u32 sh_isa_memmap[256]; - -#if 0 -static int -sh_isa_mmap(__u32 start, __u32 length, __u32 offset) -{ - int idx; - - if (start >= 0x100000 || (start & 0xfff) || (length != 0x1000)) - return -1; - - idx = start >> 12; - sh_isa_memmap[idx] = 0xb8000000 + (offset &~ 0xfff); - printk("sh_isa_mmap: start %x len %x offset %x (idx %x paddr %x)\n", - start, length, offset, idx, sh_isa_memmap[idx]); - return 0; -} -#endif - -unsigned long -sh7751se_isa_port2addr(unsigned long offset) -{ - int idx; - - idx = (offset >> 12) & 0xff; - offset &= 0xfff; - return sh_isa_memmap[idx] + offset; -} diff --git a/arch/sh/boards/sh03/setup.c b/arch/sh/boards/sh03/setup.c index dab742a00c6f..7d31d6aed8a5 100644 --- a/arch/sh/boards/sh03/setup.c +++ b/arch/sh/boards/sh03/setup.c @@ -12,11 +12,10 @@ #include <asm/sh03/io.h> #include <asm/sh03/sh03.h> #include <asm/addrspace.h> -#include "../../drivers/pci/pci-sh7751.h" const char *get_system_type(void) { - return "Interface CTP/PCI-SH03)"; + return "Interface (CTP/PCI-SH03)"; } static void init_sh03_IRQ(void) @@ -39,7 +38,7 @@ static void __iomem *sh03_ioport_map(unsigned long port, unsigned int size) if (((port >= 0x1f0) && (port <= 0x1f7)) || (port == 0x3f6)) return (void __iomem *)((unsigned long)cf_io_base + port); - return (void __iomem *)(port + SH7751_PCI_IO_BASE); + return (void __iomem *)(port + PCI_IO_BASE); } struct sh_machine_vector mv_sh03 __initmv = { @@ -51,7 +50,6 @@ struct sh_machine_vector mv_sh03 __initmv = { .mv_heartbeat = heartbeat_sh03, #endif }; - ALIAS_MV(sh03) /* arch/sh/boards/sh03/rtc.c */ diff --git a/arch/sh/boards/snapgear/io.c b/arch/sh/boards/snapgear/io.c index 9f700b8392bb..0f4824264557 100644 --- a/arch/sh/boards/snapgear/io.c +++ b/arch/sh/boards/snapgear/io.c @@ -1,6 +1,4 @@ -/* - * linux/arch/sh/kernel/io_7751se.c - * +/* * Copyright (C) 2002 David McCullough <davidm@snapgear.com> * Copyright (C) 2001 Ian da Silva, Jeremy Siegel * Based largely on io_se.c. @@ -11,54 +9,22 @@ * placeholder code from io_se.c left in with the * expectation of later SuperIO and PCMCIA access. */ - #include <linux/kernel.h> #include <linux/types.h> #include <linux/pci.h> #include <asm/io.h> #include <asm/addrspace.h> -#include <asm/pci.h> -#include "../../drivers/pci/pci-sh7751.h" - #ifdef CONFIG_SH_SECUREEDGE5410 unsigned short secureedge5410_ioport; #endif -/* - * The SnapGear uses the built-in PCI controller (PCIC) - * of the 7751 processor - */ - -#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR) -#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR) -#define PCI_IO_AREA SH7751_PCI_IO_BASE -#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE - -#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK)) - -static inline void delay(void) -{ - ctrl_inw(0xa0000000); -} - static inline volatile __u16 *port2adr(unsigned int port) { maybebadio((unsigned long)port); return (volatile __u16*)port; } -/* In case someone configures the kernel w/o PCI support: in that */ -/* scenario, don't ever bother to check for PCI-window addresses */ - -/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */ -#if defined(CONFIG_PCI) -#define CHECK_SH7751_PCIIO(port) \ - ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE))) -#else -#define CHECK_SH7751_PCIIO(port) (0) -#endif - /* * General outline: remap really low stuff [eventually] to SuperIO, * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) @@ -66,39 +32,36 @@ static inline volatile __u16 *port2adr(unsigned int port) * should be way beyond the window, and is used w/o translation for * compatibility. */ - unsigned char snapgear_inb(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned char *)port; - else if (CHECK_SH7751_PCIIO(port)) - return *(volatile unsigned char *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + return *(volatile unsigned char *)pci_ioaddr(port); else - return (*port2adr(port))&0xff; + return (*port2adr(port)) & 0xff; } - unsigned char snapgear_inb_p(unsigned long port) { unsigned char v; if (PXSEG(port)) v = *(volatile unsigned char *)port; - else if (CHECK_SH7751_PCIIO(port)) - v = *(volatile unsigned char *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + v = *(volatile unsigned char *)pci_ioaddr(port); else - v = (*port2adr(port))&0xff; - delay(); + v = (*port2adr(port))&0xff; + ctrl_delay(); return v; } - unsigned short snapgear_inw(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned short *)port; - else if (CHECK_SH7751_PCIIO(port)) - return *(volatile unsigned short *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + return *(volatile unsigned short *)pci_ioaddr(port); else if (port >= 0x2000) return *port2adr(port); else @@ -106,13 +69,12 @@ unsigned short snapgear_inw(unsigned long port) return 0; } - unsigned int snapgear_inl(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned long *)port; - else if (CHECK_SH7751_PCIIO(port)) - return *(volatile unsigned int *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + return *(volatile unsigned int *)pci_ioaddr(port); else if (port >= 0x2000) return *port2adr(port); else @@ -120,50 +82,46 @@ unsigned int snapgear_inl(unsigned long port) return 0; } - void snapgear_outb(unsigned char value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned char*)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned char*)pci_ioaddr(port)) = value; else *(port2adr(port)) = value; } - void snapgear_outb_p(unsigned char value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned char*)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned char*)pci_ioaddr(port)) = value; else *(port2adr(port)) = value; - delay(); + ctrl_delay(); } - void snapgear_outw(unsigned short value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned short *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned short *)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned short *)pci_ioaddr(port)) = value; else if (port >= 0x2000) *port2adr(port) = value; else maybebadio(port); } - void snapgear_outl(unsigned int value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned long *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned long*)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned long*)pci_ioaddr(port)) = value; else maybebadio(port); } diff --git a/arch/sh/boards/titan/io.c b/arch/sh/boards/titan/io.c index 48f3494f55b1..4730c1dd697d 100644 --- a/arch/sh/boards/titan/io.c +++ b/arch/sh/boards/titan/io.c @@ -1,34 +1,11 @@ /* * I/O routines for Titan */ - #include <linux/pci.h> #include <asm/machvec.h> #include <asm/addrspace.h> #include <asm/titan.h> #include <asm/io.h> -#include "../../drivers/pci/pci-sh7751.h" - -#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR) -#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR) -#define PCI_IO_AREA SH7751_PCI_IO_BASE -#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE - -#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK)) - -#if defined(CONFIG_PCI) -#define CHECK_SH7751_PCIIO(port) \ - ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE))) -#define CHECK_SH7751_PCIMEMIO(port) \ - ((port >= PCIBIOS_MIN_MEM) && (port < (PCIBIOS_MIN_MEM + SH7751_PCI_MEM_SIZE))) -#else -#define CHECK_SH7751_PCIIO(port) (0) -#endif - -static inline void delay(void) -{ - ctrl_inw(0xa0000000); -} static inline unsigned int port2adr(unsigned int port) { @@ -40,8 +17,8 @@ u8 titan_inb(unsigned long port) { if (PXSEG(port)) return ctrl_inb(port); - else if (CHECK_SH7751_PCIIO(port)) - return ctrl_inb(PCI_IOMAP(port)); + else if (is_pci_ioaddr(port)) + return ctrl_inb(pci_ioaddr(port)); return ctrl_inw(port2adr(port)) & 0xff; } @@ -51,11 +28,11 @@ u8 titan_inb_p(unsigned long port) if (PXSEG(port)) v = ctrl_inb(port); - else if (CHECK_SH7751_PCIIO(port)) - v = ctrl_inb(PCI_IOMAP(port)); + else if (is_pci_ioaddr(port)) + v = ctrl_inb(pci_ioaddr(port)); else v = ctrl_inw(port2adr(port)) & 0xff; - delay(); + ctrl_delay(); return v; } @@ -63,8 +40,8 @@ u16 titan_inw(unsigned long port) { if (PXSEG(port)) return ctrl_inw(port); - else if (CHECK_SH7751_PCIIO(port)) - return ctrl_inw(PCI_IOMAP(port)); + else if (is_pci_ioaddr(port)) + return ctrl_inw(pci_ioaddr(port)); else if (port >= 0x2000) return ctrl_inw(port2adr(port)); else @@ -76,8 +53,8 @@ u32 titan_inl(unsigned long port) { if (PXSEG(port)) return ctrl_inl(port); - else if (CHECK_SH7751_PCIIO(port)) - return ctrl_inl(PCI_IOMAP(port)); + else if (is_pci_ioaddr(port)) + return ctrl_inl(pci_ioaddr(port)); else if (port >= 0x2000) return ctrl_inw(port2adr(port)); else @@ -89,8 +66,8 @@ void titan_outb(u8 value, unsigned long port) { if (PXSEG(port)) ctrl_outb(value, port); - else if (CHECK_SH7751_PCIIO(port)) - ctrl_outb(value, PCI_IOMAP(port)); + else if (is_pci_ioaddr(port)) + ctrl_outb(value, pci_ioaddr(port)); else ctrl_outw(value, port2adr(port)); } @@ -99,19 +76,19 @@ void titan_outb_p(u8 value, unsigned long port) { if (PXSEG(port)) ctrl_outb(value, port); - else if (CHECK_SH7751_PCIIO(port)) - ctrl_outb(value, PCI_IOMAP(port)); + else if (is_pci_ioaddr(port)) + ctrl_outb(value, pci_ioaddr(port)); else ctrl_outw(value, port2adr(port)); - delay(); + ctrl_delay(); } void titan_outw(u16 value, unsigned long port) { if (PXSEG(port)) ctrl_outw(value, port); - else if (CHECK_SH7751_PCIIO(port)) - ctrl_outw(value, PCI_IOMAP(port)); + else if (is_pci_ioaddr(port)) + ctrl_outw(value, pci_ioaddr(port)); else if (port >= 0x2000) ctrl_outw(value, port2adr(port)); else @@ -122,8 +99,8 @@ void titan_outl(u32 value, unsigned long port) { if (PXSEG(port)) ctrl_outl(value, port); - else if (CHECK_SH7751_PCIIO(port)) - ctrl_outl(value, PCI_IOMAP(port)); + else if (is_pci_ioaddr(port)) + ctrl_outl(value, pci_ioaddr(port)); else maybebadio(port); } @@ -140,10 +117,10 @@ void titan_outsl(unsigned long port, const void *src, unsigned long count) void __iomem *titan_ioport_map(unsigned long port, unsigned int size) { - if (PXSEG(port) || CHECK_SH7751_PCIMEMIO(port)) + if (PXSEG(port) || is_pci_memaddr(port)) return (void __iomem *)port; - else if (CHECK_SH7751_PCIIO(port)) - return (void __iomem *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + return (void __iomem *)pci_ioaddr(port); return (void __iomem *)port2adr(port); } diff --git a/arch/sh/cchips/hd6446x/hd64461/io.c b/arch/sh/cchips/hd6446x/hd64461/io.c index f77f18f2ba7f..7909a1b7b512 100644 --- a/arch/sh/cchips/hd6446x/hd64461/io.c +++ b/arch/sh/cchips/hd6446x/hd64461/io.c @@ -53,11 +53,6 @@ static __inline__ unsigned long PORT2ADDR(unsigned long port) return 0xa0000000 + (port & 0x1fffffff); } -static inline void delay(void) -{ - ctrl_inw(0xa0000000); -} - unsigned char hd64461_inb(unsigned long port) { return *(volatile unsigned char*)PORT2ADDR(port); @@ -66,7 +61,7 @@ unsigned char hd64461_inb(unsigned long port) unsigned char hd64461_inb_p(unsigned long port) { unsigned long v = *(volatile unsigned char*)PORT2ADDR(port); - delay(); + ctrl_delay(); return v; } @@ -88,7 +83,7 @@ void hd64461_outb(unsigned char b, unsigned long port) void hd64461_outb_p(unsigned char b, unsigned long port) { *(volatile unsigned char*)PORT2ADDR(port) = b; - delay(); + ctrl_delay(); } void hd64461_outw(unsigned short b, unsigned long port) diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index 3d8078f1c05f..9e00cb8a39e9 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -6,8 +6,8 @@ obj-y += pci.o obj-$(CONFIG_PCI_AUTO) += pci-auto.o obj-$(CONFIG_CPU_SUBTYPE_ST40STB1) += pci-st40.o -obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o -obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o +obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o +obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \ dma-dreamcast.o @@ -17,3 +17,4 @@ obj-$(CONFIG_SH_RTS7751R2D) += ops-rts7751r2d.o fixups-rts7751r2d.o obj-$(CONFIG_SH_SH03) += ops-sh03.o fixups-sh03.o obj-$(CONFIG_SH_R7780RP) += ops-r7780rp.o fixups-r7780rp.o obj-$(CONFIG_SH_TITAN) += ops-titan.o +obj-$(CONFIG_SH_LANDISK) += ops-landisk.o diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c index 63b1c6f4b8d2..c0af5f7ef414 100644 --- a/arch/sh/drivers/pci/fixups-dreamcast.c +++ b/arch/sh/drivers/pci/fixups-dreamcast.c @@ -4,7 +4,7 @@ * PCI fixups for the Sega Dreamcast * * Copyright (C) 2001, 2002 M. R. Brown - * Copyright (C) 2002, 2003 Paul Mundt + * Copyright (C) 2002, 2003, 2006 Paul Mundt * * This file originally bore the message (with enclosed-$): * Id: pci.c,v 1.3 2003/05/04 19:29:46 lethal Exp @@ -45,36 +45,16 @@ static void __init gapspci_fixup_resources(struct pci_dev *dev) printk("PCI: Failed resource fixup\n"); } } - DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, gapspci_fixup_resources); -void __init pcibios_fixup_bus(struct pci_bus *bus) +int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin) { - /* - * We don't have any sub bus to fix up, and this is a rather - * stupid place to put general device fixups. Don't do it. - * Use the pcibios_fixups table or suffer the consequences. + /* + * The interrupt routing semantics here are quite trivial. + * + * We basically only support one interrupt, so we only bother + * updating a device's interrupt line with this single shared + * interrupt. Keeps routing quite simple, doesn't it? */ + return GAPSPCI_IRQ; } - -void __init pcibios_fixup_irqs(void) -{ - struct pci_dev *dev = 0; - - for_each_pci_dev(dev) { - /* - * The interrupt routing semantics here are quite trivial. - * - * We basically only support one interrupt, so we only bother - * updating a device's interrupt line with this single shared - * interrupt. Keeps routing quite simple, doesn't it? - */ - printk(KERN_NOTICE "PCI: Fixing up IRQ routing for device %s\n", - pci_name(dev)); - - dev->irq = GAPSPCI_IRQ; - - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); - } -} - diff --git a/arch/sh/drivers/pci/fixups-r7780rp.c b/arch/sh/drivers/pci/fixups-r7780rp.c index b656b562ec99..3e321df65d22 100644 --- a/arch/sh/drivers/pci/fixups-r7780rp.c +++ b/arch/sh/drivers/pci/fixups-r7780rp.c @@ -4,36 +4,42 @@ * Highlander R7780RP-1 PCI fixups * * Copyright (C) 2003 Lineo uSolutions, Inc. - * Copyright (C) 2004 Paul Mundt + * Copyright (C) 2004 - 2006 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. */ -#include "pci-sh7780.h" +#include <linux/pci.h> +#include "pci-sh4.h" #include <asm/io.h> int pci_fixup_pcic(void) { - outl(0x000043ff, PCI_REG(SH7780_PCIIMR)); - outl(0x0000380f, PCI_REG(SH7780_PCIAINTM)); + pci_write_reg(0x000043ff, SH4_PCIINTM); + pci_write_reg(0x0000380f, SH4_PCIAINTM); - outl(0xfbb00047, PCI_REG(SH7780_PCICMD)); - outl(0x00000000, PCI_REG(SH7780_PCIIBAR)); + pci_write_reg(0xfbb00047, SH7780_PCICMD); + pci_write_reg(0x00000000, SH7780_PCIIBAR); - outl(0x00011912, PCI_REG(SH7780_PCISVID)); - outl(0x08000000, PCI_REG(SH7780_PCICSCR0)); - outl(0x0000001b, PCI_REG(SH7780_PCICSAR0)); - outl(0xfd000000, PCI_REG(SH7780_PCICSCR1)); - outl(0x0000000f, PCI_REG(SH7780_PCICSAR1)); + pci_write_reg(0x00011912, SH7780_PCISVID); + pci_write_reg(0x08000000, SH7780_PCICSCR0); + pci_write_reg(0x0000001b, SH7780_PCICSAR0); + pci_write_reg(0xfd000000, SH7780_PCICSCR1); + pci_write_reg(0x0000000f, SH7780_PCICSAR1); - outl(0xfd000000, PCI_REG(SH7780_PCIMBR0)); - outl(0x00fc0000, PCI_REG(SH7780_PCIMBMR0)); + pci_write_reg(0xfd000000, SH7780_PCIMBR0); + pci_write_reg(0x00fc0000, SH7780_PCIMBMR0); + +#ifdef CONFIG_32BIT + pci_write_reg(0xc0000000, SH7780_PCIMBR2); + pci_write_reg(0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2); +#endif /* Set IOBR for windows containing area specified in pci.h */ - outl((PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE-1)), PCI_REG(SH7780_PCIIOBR)); - outl(((SH7780_PCI_IO_SIZE-1) & (7<<18)), PCI_REG(SH7780_PCIIOBMR)); + pci_write_reg((PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)), + SH7780_PCIIOBR); + pci_write_reg(((SH7780_PCI_IO_SIZE-1) & (7<<18)), SH7780_PCIIOBMR); return 0; } - diff --git a/arch/sh/drivers/pci/fixups-rts7751r2d.c b/arch/sh/drivers/pci/fixups-rts7751r2d.c index 0c590fc7a081..e72ceb560d5b 100644 --- a/arch/sh/drivers/pci/fixups-rts7751r2d.c +++ b/arch/sh/drivers/pci/fixups-rts7751r2d.c @@ -10,8 +10,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ -#include "pci-sh7751.h" -#include <asm/io.h> +#include "pci-sh4.h" #define PCIMCR_MRSET_OFF 0xBFFFFFFF #define PCIMCR_RFSH_OFF 0xFFFFFFFB @@ -22,22 +21,23 @@ int pci_fixup_pcic(void) bcr1 = inl(SH7751_BCR1); bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */ - outl(bcr1, PCI_REG(SH7751_PCIBCR1)); + pci_write_reg(bcr1, SH4_PCIBCR1); /* Enable all interrupts, so we known what to fix */ - outl(0x0000c3ff, PCI_REG(SH7751_PCIINTM)); - outl(0x0000380f, PCI_REG(SH7751_PCIAINTM)); + pci_write_reg(0x0000c3ff, SH4_PCIINTM); + pci_write_reg(0x0000380f, SH4_PCIAINTM); - outl(0xfb900047, PCI_REG(SH7751_PCICONF1)); - outl(0xab000001, PCI_REG(SH7751_PCICONF4)); + pci_write_reg(0xfb900047, SH7751_PCICONF1); + pci_write_reg(0xab000001, SH7751_PCICONF4); mcr = inl(SH7751_MCR); mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF; - outl(mcr, PCI_REG(SH7751_PCIMCR)); + pci_write_reg(mcr, SH4_PCIMCR); + + pci_write_reg(0x0c000000, SH7751_PCICONF5); + pci_write_reg(0xd0000000, SH7751_PCICONF6); + pci_write_reg(0x0c000000, SH4_PCILAR0); + pci_write_reg(0x00000000, SH4_PCILAR1); - outl(0x0c000000, PCI_REG(SH7751_PCICONF5)); - outl(0xd0000000, PCI_REG(SH7751_PCICONF6)); - outl(0x0c000000, PCI_REG(SH7751_PCILAR0)); - outl(0x00000000, PCI_REG(SH7751_PCILAR1)); return 0; } diff --git a/arch/sh/drivers/pci/fixups-sh03.c b/arch/sh/drivers/pci/fixups-sh03.c index 57ac26c2171f..2e8a18b7ee53 100644 --- a/arch/sh/drivers/pci/fixups-sh03.c +++ b/arch/sh/drivers/pci/fixups-sh03.c @@ -3,11 +3,7 @@ #include <linux/types.h> #include <linux/pci.h> -/* - * IRQ functions - */ - -int __init pcibios_map_platform_irq(u8 slot, u8 pin, struct pci_dev *dev) +int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin) { int irq; @@ -17,8 +13,9 @@ int __init pcibios_map_platform_irq(u8 slot, u8 pin, struct pci_dev *dev) case 8: return 5; /* eth1 */ case 6: return 2; /* PCI bridge */ default: - printk("PCI: Bad IRQ mapping request for slot %d\n", slot); - return 2; + printk(KERN_ERR "PCI: Bad IRQ mapping request " + "for slot %d\n", slot); + return 2; } } else { switch (pin) { @@ -32,30 +29,3 @@ int __init pcibios_map_platform_irq(u8 slot, u8 pin, struct pci_dev *dev) } return irq; } - -static u8 __init sh03_no_swizzle(struct pci_dev *dev, u8 *pin) -{ - /* no swizzling */ - return PCI_SLOT(dev->devfn); -} - -static int sh03_pci_lookup_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - int irq = -1; - - /* now lookup the actual IRQ on a platform specific basis (pci-'platform'.c) */ - irq = pcibios_map_platform_irq(slot, pin, dev); - if( irq < 0 ) { - pr_debug("PCI: Error mapping IRQ on device %s\n", pci_name(dev)); - return irq; - } - - pr_debug("Setting IRQ for slot %s to %d\n", pci_name(dev), irq); - - return irq; -} - -void __init pcibios_fixup_irqs(void) -{ - pci_fixup_irqs(sh03_no_swizzle, sh03_pci_lookup_irq); -} diff --git a/arch/sh/drivers/pci/ops-bigsur.c b/arch/sh/drivers/pci/ops-bigsur.c index ae82c6ca05e5..5da501bd77b5 100644 --- a/arch/sh/drivers/pci/ops-bigsur.c +++ b/arch/sh/drivers/pci/ops-bigsur.c @@ -10,15 +10,12 @@ * * PCI initialization for the Hitachi Big Sur Evaluation Board */ - #include <linux/kernel.h> #include <linux/types.h> #include <linux/init.h> -#include <linux/delay.h> #include <linux/pci.h> - #include <asm/io.h> -#include "pci-sh7751.h" +#include "pci-sh4.h" #include <asm/bigsur/bigsur.h> #define BIGSUR_PCI_IO 0x4000 @@ -41,11 +38,11 @@ static struct resource sh7751_mem_resource = { extern struct pci_ops sh7751_pci_ops; struct pci_channel board_pci_channels[] = { - { &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, + { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, { 0, } }; -static struct sh7751_pci_address_map sh7751_pci_map = { +static struct sh4_pci_address_map sh7751_pci_map = { .window0 = { .base = SH7751_CS3_BASE_ADDR, .size = BIGSUR_LSR0_SIZE, @@ -58,7 +55,7 @@ static struct sh7751_pci_address_map sh7751_pci_map = { }; /* - * Initialize the Big Sur PCI interface + * Initialize the Big Sur PCI interface * Setup hardware to be Central Funtion * Copy the BSR regs to the PCI interface * Setup PCI windows into local RAM @@ -68,15 +65,15 @@ int __init pcibios_init_platform(void) return sh7751_pcic_init(&sh7751_pci_map); } -int pcibios_map_platform_irq(u8 slot, u8 pin) +int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { - /* + /* * The Big Sur can be used in a CPCI chassis, but the SH7751 PCI * interface is on the wrong end of the board so that it can also * support a V320 CPI interface chip... Therefor the IRQ mapping is * somewhat use dependent... I'l assume a linear map for now, i.e. * INTA=slot0,pin0... INTD=slot3,pin0... - */ + */ int irq = (slot + pin-1) % 4 + BIGSUR_SH7751_PCI_IRQ_BASE; PCIDBG(2, "PCI: Mapping Big Sur IRQ for slot %d, pin %c to irq %d\n", @@ -84,4 +81,3 @@ int pcibios_map_platform_irq(u8 slot, u8 pin) return irq; } - diff --git a/arch/sh/drivers/pci/ops-landisk.c b/arch/sh/drivers/pci/ops-landisk.c new file mode 100644 index 000000000000..ada301c21fe7 --- /dev/null +++ b/arch/sh/drivers/pci/ops-landisk.c @@ -0,0 +1,68 @@ +/* + * arch/sh/drivers/pci/ops-landisk.c + * + * PCI initialization for the I-O DATA Device, Inc. LANDISK board + * + * Copyright (C) 2006 kogiidena + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + */ +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include "pci-sh4.h" + +static struct resource sh7751_io_resource = { + .name = "SH7751 IO", + .start = 0x4000, + .end = 0x4000 + SH7751_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO +}; + +static struct resource sh7751_mem_resource = { + .name = "SH7751 mem", + .start = SH7751_PCI_MEMORY_BASE, + .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM +}; + +struct pci_channel board_pci_channels[] = { + {&sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0x3ff}, + {NULL, NULL, NULL, 0, 0}, +}; + +static struct sh4_pci_address_map sh7751_pci_map = { + .window0 = { + .base = SH7751_CS3_BASE_ADDR, + .size = (64 << 20), /* 64MB */ + }, + + .flags = SH4_PCIC_NO_RESET, +}; + +int __init pcibios_init_platform(void) +{ + return sh7751_pcic_init(&sh7751_pci_map); +} + +int pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) +{ + /* + * slot0: pin1-4 = irq5,6,7,8 + * slot1: pin1-4 = irq6,7,8,5 + * slot2: pin1-4 = irq7,8,5,6 + * slot3: pin1-4 = irq8,5,6,7 + */ + int irq = ((slot + pin - 1) & 0x3) + 5; + + if ((slot | (pin - 1)) > 0x3) { + printk("PCI: Bad IRQ mapping request for slot %d pin %c\n", + slot, pin - 1 + 'A'); + return -1; + } + return irq; +} diff --git a/arch/sh/drivers/pci/ops-r7780rp.c b/arch/sh/drivers/pci/ops-r7780rp.c index 3254c4e917a9..554d5ed2c586 100644 --- a/arch/sh/drivers/pci/ops-r7780rp.c +++ b/arch/sh/drivers/pci/ops-r7780rp.c @@ -15,13 +15,11 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/pci.h> -#include <linux/module.h> - -#include <asm/io.h> -#include "pci-sh7780.h" #include <asm/r7780rp/r7780rp.h> +#include <asm/io.h> +#include "pci-sh4.h" -int __init pcibios_map_platform_irq(u8 slot, u8 pin) +int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { switch (slot) { case 0: return IRQ_PCISLOT1; /* PCI Interrupt #1 */ @@ -29,7 +27,8 @@ int __init pcibios_map_platform_irq(u8 slot, u8 pin) case 2: return IRQ_PCISLOT3; /* PCI Interrupt #3 */ case 3: return IRQ_PCISLOT4; /* PCI Interrupt E4 */ default: - printk("PCI: Bad IRQ mapping request for slot %d, func %d\n", slot, pin-1); + printk(KERN_ERR "PCI: Bad IRQ mapping " + "request for slot %d, func %d\n", slot, pin-1); return -1; } } @@ -51,12 +50,12 @@ static struct resource sh7780_mem_resource = { extern struct pci_ops sh7780_pci_ops; struct pci_channel board_pci_channels[] = { - { &sh7780_pci_ops, &sh7780_io_resource, &sh7780_mem_resource, 0, 0xff }, + { &sh4_pci_ops, &sh7780_io_resource, &sh7780_mem_resource, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; EXPORT_SYMBOL(board_pci_channels); -static struct sh7780_pci_address_map sh7780_pci_map = { +static struct sh4_pci_address_map sh7780_pci_map = { .window0 = { .base = SH7780_CS2_BASE_ADDR, .size = 0x04000000, @@ -67,11 +66,10 @@ static struct sh7780_pci_address_map sh7780_pci_map = { .size = 0x04000000, }, - .flags = SH7780_PCIC_NO_RESET, + .flags = SH4_PCIC_NO_RESET, }; int __init pcibios_init_platform(void) { return sh7780_pcic_init(&sh7780_pci_map); } - diff --git a/arch/sh/drivers/pci/ops-rts7751r2d.c b/arch/sh/drivers/pci/ops-rts7751r2d.c index 83171d10141a..88f44e245424 100644 --- a/arch/sh/drivers/pci/ops-rts7751r2d.c +++ b/arch/sh/drivers/pci/ops-rts7751r2d.c @@ -17,12 +17,11 @@ #include <linux/delay.h> #include <linux/pci.h> #include <linux/module.h> - -#include <asm/io.h> -#include "pci-sh7751.h" #include <asm/rts7751r2d/rts7751r2d.h> +#include <asm/io.h> +#include "pci-sh4.h" -int __init pcibios_map_platform_irq(u8 slot, u8 pin) +int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { switch (slot) { case 0: return IRQ_PCISLOT1; /* PCI Extend slot #1 */ @@ -52,12 +51,12 @@ static struct resource sh7751_mem_resource = { extern struct pci_ops sh7751_pci_ops; struct pci_channel board_pci_channels[] = { - { &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, + { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; EXPORT_SYMBOL(board_pci_channels); -static struct sh7751_pci_address_map sh7751_pci_map = { +static struct sh4_pci_address_map sh7751_pci_map = { .window0 = { .base = SH7751_CS3_BASE_ADDR, .size = 0x04000000, @@ -68,7 +67,7 @@ static struct sh7751_pci_address_map sh7751_pci_map = { .size = 0x00000000, /* Unused */ }, - .flags = SH7751_PCIC_NO_RESET, + .flags = SH4_PCIC_NO_RESET, }; int __init pcibios_init_platform(void) diff --git a/arch/sh/drivers/pci/ops-sh4.c b/arch/sh/drivers/pci/ops-sh4.c new file mode 100644 index 000000000000..2d4371009a5e --- /dev/null +++ b/arch/sh/drivers/pci/ops-sh4.c @@ -0,0 +1,164 @@ +/* + * Generic SH-4 / SH-4A PCIC operations (SH7751, SH7780). + * + * Copyright (C) 2002 - 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License v2. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/pci.h> +#include <asm/addrspace.h> +#include <asm/io.h> +#include "pci-sh4.h" + +/* + * Direct access to PCI hardware... + */ +#define CONFIG_CMD(bus, devfn, where) \ + P1SEGADDR((bus->number << 16) | (devfn << 8) | (where & ~3)) + +static DEFINE_SPINLOCK(sh4_pci_lock); + +/* + * Functions for accessing PCI configuration space with type 1 accesses + */ +static int sh4_pci_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + unsigned long flags; + u32 data; + + /* + * PCIPDR may only be accessed as 32 bit words, + * so we must do byte alignment by hand + */ + spin_lock_irqsave(&sh4_pci_lock, flags); + pci_write_reg(CONFIG_CMD(bus, devfn, where), SH4_PCIPAR); + data = pci_read_reg(SH4_PCIPDR); + spin_unlock_irqrestore(&sh4_pci_lock, flags); + + switch (size) { + case 1: + *val = (data >> ((where & 3) << 3)) & 0xff; + break; + case 2: + *val = (data >> ((where & 2) << 3)) & 0xffff; + break; + case 4: + *val = data; + break; + default: + return PCIBIOS_FUNC_NOT_SUPPORTED; + } + + return PCIBIOS_SUCCESSFUL; +} + +/* + * Since SH4 only does 32bit access we'll have to do a read, + * mask,write operation. + * We'll allow an odd byte offset, though it should be illegal. + */ +static int sh4_pci_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + unsigned long flags; + int shift; + u32 data; + + spin_lock_irqsave(&sh4_pci_lock, flags); + pci_write_reg(CONFIG_CMD(bus, devfn, where), SH4_PCIPAR); + data = pci_read_reg(SH4_PCIPDR); + spin_unlock_irqrestore(&sh4_pci_lock, flags); + + switch (size) { + case 1: + shift = (where & 3) << 3; + data &= ~(0xff << shift); + data |= ((val & 0xff) << shift); + break; + case 2: + shift = (where & 2) << 3; + data &= ~(0xffff << shift); + data |= ((val & 0xffff) << shift); + break; + case 4: + data = val; + break; + default: + return PCIBIOS_FUNC_NOT_SUPPORTED; + } + + pci_write_reg(data, SH4_PCIPDR); + + return PCIBIOS_SUCCESSFUL; +} + +struct pci_ops sh4_pci_ops = { + .read = sh4_pci_read, + .write = sh4_pci_write, +}; + +/* + * Not really related to pci_ops, but it's common and not worth shoving + * somewhere else for now.. + */ +static unsigned int pci_probe = PCI_PROBE_CONF1; + +int __init sh4_pci_check_direct(void) +{ + /* + * Check if configuration works. + */ + if (pci_probe & PCI_PROBE_CONF1) { + unsigned int tmp = pci_read_reg(SH4_PCIPAR); + + pci_write_reg(P1SEG, SH4_PCIPAR); + + if (pci_read_reg(SH4_PCIPAR) == P1SEG) { + pci_write_reg(tmp, SH4_PCIPAR); + printk(KERN_INFO "PCI: Using configuration type 1\n"); + request_region(PCI_REG(SH4_PCIPAR), 8, "PCI conf1"); + + return 0; + } + + pci_write_reg(tmp, SH4_PCIPAR); + } + + pr_debug("PCI: pci_check_direct failed\n"); + return -EINVAL; +} + +/* Handle generic fixups */ +static void __init pci_fixup_ide_bases(struct pci_dev *d) +{ + int i; + + /* + * PCI IDE controllers use non-standard I/O port decoding, respect it. + */ + if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE) + return; + pr_debug("PCI: IDE base address fixup for %s\n", pci_name(d)); + for(i = 0; i < 4; i++) { + struct resource *r = &d->resource[i]; + + if ((r->start & ~0x80) == 0x374) { + r->start |= 2; + r->end = r->start; + } + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); + +char * __init pcibios_setup(char *str) +{ + if (!strcmp(str, "off")) { + pci_probe = 0; + return NULL; + } + + return str; +} diff --git a/arch/sh/drivers/pci/ops-snapgear.c b/arch/sh/drivers/pci/ops-snapgear.c index 3cbd14dd28fe..53dd893d4e54 100644 --- a/arch/sh/drivers/pci/ops-snapgear.c +++ b/arch/sh/drivers/pci/ops-snapgear.c @@ -2,7 +2,7 @@ * arch/sh/drivers/pci/ops-snapgear.c * * Author: David McCullough <davidm@snapgear.com> - * + * * Ported to new API by Paul Mundt <lethal@linux-sh.org> * * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. @@ -12,15 +12,11 @@ * * PCI initialization for the SnapGear boards */ - #include <linux/kernel.h> #include <linux/types.h> #include <linux/init.h> -#include <linux/delay.h> #include <linux/pci.h> - -#include <asm/io.h> -#include "pci-sh7751.h" +#include "pci-sh4.h" #define SNAPGEAR_PCI_IO 0x4000 #define SNAPGEAR_PCI_MEM 0xfd000000 @@ -43,14 +39,12 @@ static struct resource sh7751_mem_resource = { .flags = IORESOURCE_MEM, }; -extern struct pci_ops sh7751_pci_ops; - struct pci_channel board_pci_channels[] = { - { &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, + { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, { 0, } }; -static struct sh7751_pci_address_map sh7751_pci_map = { +static struct sh4_pci_address_map sh7751_pci_map = { .window0 = { .base = SH7751_CS2_BASE_ADDR, .size = SNAPGEAR_LSR0_SIZE, @@ -61,11 +55,11 @@ static struct sh7751_pci_address_map sh7751_pci_map = { .size = SNAPGEAR_LSR1_SIZE, }, - .flags = SH7751_PCIC_NO_RESET, + .flags = SH4_PCIC_NO_RESET, }; /* - * Initialize the SnapGear PCI interface + * Initialize the SnapGear PCI interface * Setup hardware to be Central Funtion * Copy the BSR regs to the PCI interface * Setup PCI windows into local RAM @@ -75,7 +69,7 @@ int __init pcibios_init_platform(void) return sh7751_pcic_init(&sh7751_pci_map); } -int __init pcibios_map_platform_irq(u8 slot, u8 pin) +int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { int irq = -1; @@ -98,4 +92,3 @@ void __init pcibios_fixup(void) { /* Nothing to fixup .. */ } - diff --git a/arch/sh/drivers/pci/ops-titan.c b/arch/sh/drivers/pci/ops-titan.c index f76e4e963ac1..9c8b2027c35d 100644 --- a/arch/sh/drivers/pci/ops-titan.c +++ b/arch/sh/drivers/pci/ops-titan.c @@ -16,12 +16,11 @@ #include <linux/kernel.h> #include <linux/types.h> #include <linux/init.h> -#include <linux/delay.h> #include <asm/io.h> #include <asm/titan.h> -#include "pci-sh7751.h" +#include "pci-sh4.h" -int __init pcibios_map_platform_irq(u8 slot, u8 pin) +int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { int irq = -1; @@ -32,7 +31,8 @@ int __init pcibios_map_platform_irq(u8 slot, u8 pin) case 3: irq = TITAN_IRQ_MPCIB; break; /* mPCI B */ case 4: irq = TITAN_IRQ_USB; break; /* USB */ default: - printk(KERN_INFO "PCI: Bad IRQ mapping request for slot %d\n", slot); + printk(KERN_INFO "PCI: Bad IRQ mapping " + "request for slot %d\n", slot); return -1; } @@ -56,15 +56,13 @@ static struct resource sh7751_mem_resource = { .flags = IORESOURCE_MEM }; -extern struct pci_ops sh7751_pci_ops; - struct pci_channel board_pci_channels[] = { - { &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, + { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; EXPORT_SYMBOL(board_pci_channels); -static struct sh7751_pci_address_map sh7751_pci_map = { +static struct sh4_pci_address_map sh7751_pci_map = { .window0 = { .base = SH7751_CS2_BASE_ADDR, .size = SH7751_MEM_REGION_SIZE*2, /* cs2 and cs3 */ @@ -75,7 +73,7 @@ static struct sh7751_pci_address_map sh7751_pci_map = { .size = SH7751_MEM_REGION_SIZE*2, }, - .flags = SH7751_PCIC_NO_RESET, + .flags = SH4_PCIC_NO_RESET, }; int __init pcibios_init_platform(void) diff --git a/arch/sh/drivers/pci/pci-auto.c b/arch/sh/drivers/pci/pci-auto.c index d55e46618549..ecf16344f94a 100644 --- a/arch/sh/drivers/pci/pci-auto.c +++ b/arch/sh/drivers/pci/pci-auto.c @@ -358,7 +358,6 @@ pciauto_postscan_setup_cardbus_bridge(struct pci_channel *hose, { u32 temp; -#if !defined(CONFIG_SH_HS7751RVOIP) && !defined(CONFIG_SH_RTS7751R2D) && !defined(CONFIG_SH_R7780RP) /* * [jsun] we always bump up baselines a little, so that if there * nothing behind P2P bridge, we don't wind up overlapping IO/MEM @@ -366,7 +365,6 @@ pciauto_postscan_setup_cardbus_bridge(struct pci_channel *hose, */ pciauto_lower_memspc += 1; pciauto_lower_iospc += 1; -#endif /* * Configure subordinate bus number. The PCI subsystem @@ -392,11 +390,6 @@ pciauto_postscan_setup_cardbus_bridge(struct pci_channel *hose, * configured by this routine to happily live behind a * P2P bridge in a system. */ -#if defined(CONFIG_SH_HS7751RVOIP) || defined(CONFIG_SH_RTS7751R2D) || defined(CONFIG_SH_R7780RP) - pciauto_lower_memspc += 0x00400000; - pciauto_lower_iospc += 0x00004000; -#endif - /* Align memory and I/O to 4KB and 4 byte boundaries. */ pciauto_lower_memspc = (pciauto_lower_memspc + (0x1000 - 1)) & ~(0x1000 - 1); @@ -467,9 +460,6 @@ pciauto_bus_scan(struct pci_channel *hose, int top_bus, int current_bus) if ((pci_class >> 16) == PCI_CLASS_BRIDGE_PCI) { DBG(" Bridge: primary=%.2x, secondary=%.2x\n", current_bus, sub_bus + 1); -#if defined(CONFIG_SH_HS7751RVOIP) || defined(CONFIG_SH_RTS7751R2D) || defined(CONFIG_SH_R7780RP) - pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_1); -#endif pciauto_prescan_setup_bridge(hose, top_bus, current_bus, pci_devfn, sub_bus); DBG("Scanning sub bus %.2x, I/O 0x%.8x, Mem 0x%.8x\n", diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h new file mode 100644 index 000000000000..5a61d6041f2c --- /dev/null +++ b/arch/sh/drivers/pci/pci-sh4.h @@ -0,0 +1,180 @@ +#ifndef __PCI_SH4_H +#define __PCI_SH4_H + +#ifdef CONFIG_CPU_SUBTYPE_SH7780 +#include "pci-sh7780.h" +#else +#include "pci-sh7751.h" +#endif + +#include <asm/io.h> + +/* startup values */ +#define PCI_PROBE_BIOS 1 +#define PCI_PROBE_CONF1 2 +#define PCI_PROBE_CONF2 4 +#define PCI_NO_SORT 0x100 +#define PCI_BIOS_SORT 0x200 +#define PCI_NO_CHECKS 0x400 +#define PCI_ASSIGN_ROMS 0x1000 +#define PCI_BIOS_IRQ_SCAN 0x2000 + +#define SH4_PCICR 0x100 /* PCI Control Register */ + #define SH4_PCICR_PREFIX 0xA5000000 /* CR prefix for write */ + #define SH4_PCICR_FTO 0x00000400 /* TRDY/IRDY Enable */ + #define SH4_PCICR_TRSB 0x00000200 /* Target Read Single */ + #define SH4_PCICR_BSWP 0x00000100 /* Target Byte Swap */ + #define SH4_PCICR_PLUP 0x00000080 /* Enable PCI Pullup */ + #define SH4_PCICR_ARBM 0x00000040 /* PCI Arbitration Mode */ + #define SH4_PCICR_MD 0x00000030 /* MD9 and MD10 status */ + #define SH4_PCICR_SERR 0x00000008 /* SERR output assert */ + #define SH4_PCICR_INTA 0x00000004 /* INTA output assert */ + #define SH4_PCICR_PRST 0x00000002 /* PCI Reset Assert */ + #define SH4_PCICR_CFIN 0x00000001 /* Central Fun. Init Done */ +#define SH4_PCILSR0 0x104 /* PCI Local Space Register0 */ +#define SH4_PCILSR1 0x108 /* PCI Local Space Register1 */ +#define SH4_PCILAR0 0x10C /* PCI Local Addr Register1 */ +#define SH4_PCILAR1 0x110 /* PCI Local Addr Register1 */ +#define SH4_PCIINT 0x114 /* PCI Interrupt Register */ + #define SH4_PCIINT_MLCK 0x00008000 /* Master Lock Error */ + #define SH4_PCIINT_TABT 0x00004000 /* Target Abort Error */ + #define SH4_PCIINT_TRET 0x00000200 /* Target Retry Error */ + #define SH4_PCIINT_MFDE 0x00000100 /* Master Func. Disable Error */ + #define SH4_PCIINT_PRTY 0x00000080 /* Address Parity Error */ + #define SH4_PCIINT_SERR 0x00000040 /* SERR Detection Error */ + #define SH4_PCIINT_TWDP 0x00000020 /* Tgt. Write Parity Error */ + #define SH4_PCIINT_TRDP 0x00000010 /* Tgt. Read Parity Err Det. */ + #define SH4_PCIINT_MTABT 0x00000008 /* Master-Tgt. Abort Error */ + #define SH4_PCIINT_MMABT 0x00000004 /* Master-Master Abort Error */ + #define SH4_PCIINT_MWPD 0x00000002 /* Master Write PERR Detect */ + #define SH4_PCIINT_MRPD 0x00000001 /* Master Read PERR Detect */ +#define SH4_PCIINTM 0x118 /* PCI Interrupt Mask */ +#define SH4_PCIALR 0x11C /* Error Address Register */ +#define SH4_PCICLR 0x120 /* Error Command/Data */ + #define SH4_PCICLR_MPIO 0x80000000 + #define SH4_PCICLR_MDMA0 0x40000000 /* DMA0 Transfer Error */ + #define SH4_PCICLR_MDMA1 0x20000000 /* DMA1 Transfer Error */ + #define SH4_PCICLR_MDMA2 0x10000000 /* DMA2 Transfer Error */ + #define SH4_PCICLR_MDMA3 0x08000000 /* DMA3 Transfer Error */ + #define SH4_PCICLR_TGT 0x04000000 /* Target Transfer Error */ + #define SH4_PCICLR_CMDL 0x0000000F /* PCI Command at Error */ +#define SH4_PCIAINT 0x130 /* Arbiter Interrupt Register */ + #define SH4_PCIAINT_MBKN 0x00002000 /* Master Broken Interrupt */ + #define SH4_PCIAINT_TBTO 0x00001000 /* Target Bus Time Out */ + #define SH4_PCIAINT_MBTO 0x00001000 /* Master Bus Time Out */ + #define SH4_PCIAINT_TABT 0x00000008 /* Target Abort */ + #define SH4_PCIAINT_MABT 0x00000004 /* Master Abort */ + #define SH4_PCIAINT_RDPE 0x00000002 /* Read Data Parity Error */ + #define SH4_PCIAINT_WDPE 0x00000001 /* Write Data Parity Error */ +#define SH4_PCIAINTM 0x134 /* Arbiter Int. Mask Register */ +#define SH4_PCIBMLR 0x138 /* Error Bus Master Register */ + #define SH4_PCIBMLR_REQ4 0x00000010 /* REQ4 bus master at error */ + #define SH4_PCIBMLR_REQ3 0x00000008 /* REQ3 bus master at error */ + #define SH4_PCIBMLR_REQ2 0x00000004 /* REQ2 bus master at error */ + #define SH4_PCIBMLR_REQ1 0x00000002 /* REQ1 bus master at error */ + #define SH4_PCIBMLR_REQ0 0x00000001 /* REQ0 bus master at error */ +#define SH4_PCIDMABT 0x140 /* DMA Transfer Arb. Register */ + #define SH4_PCIDMABT_RRBN 0x00000001 /* DMA Arbitor Round-Robin */ +#define SH4_PCIDPA0 0x180 /* DMA0 Transfer Addr. */ +#define SH4_PCIDLA0 0x184 /* DMA0 Local Addr. */ +#define SH4_PCIDTC0 0x188 /* DMA0 Transfer Cnt. */ +#define SH4_PCIDCR0 0x18C /* DMA0 Control Register */ + #define SH4_PCIDCR_ALGN 0x00000600 /* DMA Alignment Mode */ + #define SH4_PCIDCR_MAST 0x00000100 /* DMA Termination Type */ + #define SH4_PCIDCR_INTM 0x00000080 /* DMA Interrupt Done Mask*/ + #define SH4_PCIDCR_INTS 0x00000040 /* DMA Interrupt Done Status */ + #define SH4_PCIDCR_LHLD 0x00000020 /* Local Address Control */ + #define SH4_PCIDCR_PHLD 0x00000010 /* PCI Address Control*/ + #define SH4_PCIDCR_IOSEL 0x00000008 /* PCI Address Space Type */ + #define SH4_PCIDCR_DIR 0x00000004 /* DMA Transfer Direction */ + #define SH4_PCIDCR_STOP 0x00000002 /* Force DMA Stop */ + #define SH4_PCIDCR_STRT 0x00000001 /* DMA Start */ +#define SH4_PCIDPA1 0x190 /* DMA1 Transfer Addr. */ +#define SH4_PCIDLA1 0x194 /* DMA1 Local Addr. */ +#define SH4_PCIDTC1 0x198 /* DMA1 Transfer Cnt. */ +#define SH4_PCIDCR1 0x19C /* DMA1 Control Register */ +#define SH4_PCIDPA2 0x1A0 /* DMA2 Transfer Addr. */ +#define SH4_PCIDLA2 0x1A4 /* DMA2 Local Addr. */ +#define SH4_PCIDTC2 0x1A8 /* DMA2 Transfer Cnt. */ +#define SH4_PCIDCR2 0x1AC /* DMA2 Control Register */ +#define SH4_PCIDPA3 0x1B0 /* DMA3 Transfer Addr. */ +#define SH4_PCIDLA3 0x1B4 /* DMA3 Local Addr. */ +#define SH4_PCIDTC3 0x1B8 /* DMA3 Transfer Cnt. */ +#define SH4_PCIDCR3 0x1BC /* DMA3 Control Register */ +#define SH4_PCIPAR 0x1C0 /* PIO Address Register */ + #define SH4_PCIPAR_CFGEN 0x80000000 /* Configuration Enable */ + #define SH4_PCIPAR_BUSNO 0x00FF0000 /* Config. Bus Number */ + #define SH4_PCIPAR_DEVNO 0x0000FF00 /* Config. Device Number */ + #define SH4_PCIPAR_REGAD 0x000000FC /* Register Address Number */ +#define SH4_PCIMBR 0x1C4 /* Memory Base Address */ + #define SH4_PCIMBR_MASK 0xFF000000 /* Memory Space Mask */ + #define SH4_PCIMBR_LOCK 0x00000001 /* Lock Memory Space */ +#define SH4_PCIIOBR 0x1C8 /* I/O Base Address Register */ + #define SH4_PCIIOBR_MASK 0xFFFC0000 /* IO Space Mask */ + #define SH4_PCIIOBR_LOCK 0x00000001 /* Lock IO Space */ +#define SH4_PCIPINT 0x1CC /* Power Mgmnt Int. Register */ + #define SH4_PCIPINT_D3 0x00000002 /* D3 Pwr Mgmt. Interrupt */ + #define SH4_PCIPINT_D0 0x00000001 /* D0 Pwr Mgmt. Interrupt */ +#define SH4_PCIPINTM 0x1D0 /* Power Mgmnt Mask Register */ +#define SH4_PCICLKR 0x1D4 /* Clock Ctrl. Register */ + #define SH4_PCICLKR_PCSTP 0x00000002 /* PCI Clock Stop */ + #define SH4_PCICLKR_BCSTP 0x00000001 /* BCLK Clock Stop */ +/* For definitions of BCR, MCR see ... */ +#define SH4_PCIBCR1 0x1E0 /* Memory BCR1 Register */ + #define SH4_PCIMBR0 SH4_PCIBCR1 +#define SH4_PCIBCR2 0x1E4 /* Memory BCR2 Register */ + #define SH4_PCIMBMR0 SH4_PCIBCR2 +#define SH4_PCIWCR1 0x1E8 /* Wait Control 1 Register */ +#define SH4_PCIWCR2 0x1EC /* Wait Control 2 Register */ +#define SH4_PCIWCR3 0x1F0 /* Wait Control 3 Register */ + #define SH4_PCIMBR2 SH4_PCIWCR3 +#define SH4_PCIMCR 0x1F4 /* Memory Control Register */ +#define SH4_PCIBCR3 0x1f8 /* Memory BCR3 Register */ +#define SH4_PCIPCTR 0x200 /* Port Control Register */ + #define SH4_PCIPCTR_P2EN 0x000400000 /* Port 2 Enable */ + #define SH4_PCIPCTR_P1EN 0x000200000 /* Port 1 Enable */ + #define SH4_PCIPCTR_P0EN 0x000100000 /* Port 0 Enable */ + #define SH4_PCIPCTR_P2UP 0x000000020 /* Port2 Pull Up Enable */ + #define SH4_PCIPCTR_P2IO 0x000000010 /* Port2 Output Enable */ + #define SH4_PCIPCTR_P1UP 0x000000008 /* Port1 Pull Up Enable */ + #define SH4_PCIPCTR_P1IO 0x000000004 /* Port1 Output Enable */ + #define SH4_PCIPCTR_P0UP 0x000000002 /* Port0 Pull Up Enable */ + #define SH4_PCIPCTR_P0IO 0x000000001 /* Port0 Output Enable */ +#define SH4_PCIPDTR 0x204 /* Port Data Register */ + #define SH4_PCIPDTR_PB5 0x000000020 /* Port 5 Enable */ + #define SH4_PCIPDTR_PB4 0x000000010 /* Port 4 Enable */ + #define SH4_PCIPDTR_PB3 0x000000008 /* Port 3 Enable */ + #define SH4_PCIPDTR_PB2 0x000000004 /* Port 2 Enable */ + #define SH4_PCIPDTR_PB1 0x000000002 /* Port 1 Enable */ + #define SH4_PCIPDTR_PB0 0x000000001 /* Port 0 Enable */ +#define SH4_PCIPDR 0x220 /* Port IO Data Register */ + +/* Flags */ +#define SH4_PCIC_NO_RESET 0x0001 + +/* arch/sh/kernel/drivers/pci/ops-sh4.c */ +extern struct pci_ops sh4_pci_ops; +int sh4_pci_check_direct(void); +int pci_fixup_pcic(void); + +struct sh4_pci_address_space { + unsigned long base; + unsigned long size; +}; + +struct sh4_pci_address_map { + struct sh4_pci_address_space window0; + struct sh4_pci_address_space window1; + unsigned long flags; +}; + +static inline void pci_write_reg(unsigned long val, unsigned long reg) +{ + outl(val, PCI_REG(reg)); +} + +static inline unsigned long pci_read_reg(unsigned long reg) +{ + return inl(PCI_REG(reg)); +} +#endif /* __PCI_SH4_H */ diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c index 65093ec1b55e..dbe837884983 100644 --- a/arch/sh/drivers/pci/pci-sh7751.c +++ b/arch/sh/drivers/pci/pci-sh7751.c @@ -15,180 +15,14 @@ #undef DEBUG -#include <linux/types.h> -#include <linux/kernel.h> #include <linux/init.h> #include <linux/pci.h> -#include <linux/sched.h> -#include <linux/ioport.h> +#include <linux/types.h> #include <linux/errno.h> -#include <linux/irq.h> #include <linux/delay.h> - -#include <asm/machvec.h> +#include "pci-sh4.h" +#include <asm/addrspace.h> #include <asm/io.h> -#include "pci-sh7751.h" - -static unsigned int pci_probe = PCI_PROBE_CONF1; -extern int pci_fixup_pcic(void); - -void pcibios_fixup_irqs(void) __attribute__ ((weak)); - -/* - * Direct access to PCI hardware... - */ - -#define CONFIG_CMD(bus, devfn, where) (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3)) - -/* - * Functions for accessing PCI configuration space with type 1 accesses - */ -static int sh7751_pci_read(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 *val) -{ - unsigned long flags; - u32 data; - - /* - * PCIPDR may only be accessed as 32 bit words, - * so we must do byte alignment by hand - */ - local_irq_save(flags); - outl(CONFIG_CMD(bus,devfn,where), PCI_REG(SH7751_PCIPAR)); - data = inl(PCI_REG(SH7751_PCIPDR)); - local_irq_restore(flags); - - switch (size) { - case 1: - *val = (data >> ((where & 3) << 3)) & 0xff; - break; - case 2: - *val = (data >> ((where & 2) << 3)) & 0xffff; - break; - case 4: - *val = data; - break; - default: - return PCIBIOS_FUNC_NOT_SUPPORTED; - } - - return PCIBIOS_SUCCESSFUL; -} - -/* - * Since SH7751 only does 32bit access we'll have to do a read, - * mask,write operation. - * We'll allow an odd byte offset, though it should be illegal. - */ -static int sh7751_pci_write(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 val) -{ - unsigned long flags; - int shift; - u32 data; - - local_irq_save(flags); - outl(CONFIG_CMD(bus,devfn,where), PCI_REG(SH7751_PCIPAR)); - data = inl(PCI_REG(SH7751_PCIPDR)); - local_irq_restore(flags); - - switch (size) { - case 1: - shift = (where & 3) << 3; - data &= ~(0xff << shift); - data |= ((val & 0xff) << shift); - break; - case 2: - shift = (where & 2) << 3; - data &= ~(0xffff << shift); - data |= ((val & 0xffff) << shift); - break; - case 4: - data = val; - break; - default: - return PCIBIOS_FUNC_NOT_SUPPORTED; - } - - outl(data, PCI_REG(SH7751_PCIPDR)); - - return PCIBIOS_SUCCESSFUL; -} - -#undef CONFIG_CMD - -struct pci_ops sh7751_pci_ops = { - .read = sh7751_pci_read, - .write = sh7751_pci_write, -}; - -static int __init pci_check_direct(void) -{ - unsigned int tmp, id; - - /* check for SH7751/SH7751R hardware */ - id = inl(SH7751_PCIREG_BASE+SH7751_PCICONF0); - if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) && - id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) { - pr_debug("PCI: This is not an SH7751(R) (%x)\n", id); - return -ENODEV; - } - - /* - * Check if configuration works. - */ - if (pci_probe & PCI_PROBE_CONF1) { - tmp = inl (PCI_REG(SH7751_PCIPAR)); - outl (0x80000000, PCI_REG(SH7751_PCIPAR)); - if (inl (PCI_REG(SH7751_PCIPAR)) == 0x80000000) { - outl (tmp, PCI_REG(SH7751_PCIPAR)); - printk(KERN_INFO "PCI: Using configuration type 1\n"); - request_region(PCI_REG(SH7751_PCIPAR), 8, "PCI conf1"); - return 0; - } - outl (tmp, PCI_REG(SH7751_PCIPAR)); - } - - pr_debug("PCI: pci_check_direct failed\n"); - return -EINVAL; -} - -/***************************************************************************************/ - -/* - * Handle bus scanning and fixups .... - */ - -static void __init pci_fixup_ide_bases(struct pci_dev *d) -{ - int i; - - /* - * PCI IDE controllers use non-standard I/O port decoding, respect it. - */ - if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE) - return; - pr_debug("PCI: IDE base address fixup for %s\n", pci_name(d)); - for(i=0; i<4; i++) { - struct resource *r = &d->resource[i]; - if ((r->start & ~0x80) == 0x374) { - r->start |= 2; - r->end = r->start; - } - } -} - -DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); - -/* - * Called after each bus is probed, but before its children - * are examined. - */ - -void __init pcibios_fixup_bus(struct pci_bus *b) -{ - pci_read_bridge_bases(b); -} /* * Initialization. Try all known PCI access methods. Note that we support @@ -196,25 +30,29 @@ void __init pcibios_fixup_bus(struct pci_bus *b) * to access config space. * * Note that the platform specific initialization (BSC registers, and memory - * space mapping) will be called via the machine vectors (sh_mv.mv_pci_init()) if it - * exitst and via the platform defined function pcibios_init_platform(). - * See pci_bigsur.c for implementation; - * - * The BIOS version of the pci functions is not yet implemented but it is left - * in for completeness. Currently an error will be genereated at compile time. + * space mapping) will be called via the platform defined function + * pcibios_init_platform(). */ - static int __init sh7751_pci_init(void) { + unsigned int id; int ret; pr_debug("PCI: Starting intialization.\n"); - if ((ret = pci_check_direct()) != 0) + + /* check for SH7751/SH7751R hardware */ + id = pci_read_reg(SH7751_PCICONF0); + if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) && + id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) { + pr_debug("PCI: This is not an SH7751(R) (%x)\n", id); + return -ENODEV; + } + + if ((ret = sh4_pci_check_direct()) != 0) return ret; return pcibios_init_platform(); } - subsys_initcall(sh7751_pci_init); static int __init __area_sdram_check(unsigned int area) @@ -228,7 +66,7 @@ static int __init __area_sdram_check(unsigned int area) area, word); return 0; } - outl(word, PCI_REG(SH7751_PCIBCR1)); + pci_write_reg(word, SH4_PCIBCR1); word = (u16)inw(SH7751_BCR2); /* check BCR2 for 32bit SDRAM interface*/ @@ -237,12 +75,12 @@ static int __init __area_sdram_check(unsigned int area) area, word); return 0; } - outl(word, PCI_REG(SH7751_PCIBCR2)); + pci_write_reg(word, SH4_PCIBCR2); return 1; } -int __init sh7751_pcic_init(struct sh7751_pci_address_map *map) +int __init sh7751_pcic_init(struct sh4_pci_address_map *map) { u32 reg; u32 word; @@ -251,39 +89,39 @@ int __init sh7751_pcic_init(struct sh7751_pci_address_map *map) reg = inl(SH7751_BCR1); reg |= 0x80000; outl(reg, SH7751_BCR1); - + /* Turn the clocks back on (not done in reset)*/ - outl(0, PCI_REG(SH7751_PCICLKR)); + pci_write_reg(0, SH4_PCICLKR); /* Clear Powerdown IRQ's (not done in reset) */ - word = SH7751_PCIPINT_D3 | SH7751_PCIPINT_D0; - outl(word, PCI_REG(SH7751_PCIPINT)); + word = SH4_PCIPINT_D3 | SH4_PCIPINT_D0; + pci_write_reg(word, SH4_PCIPINT); /* * This code is unused for some boards as it is done in the * bootloader and doing it here means the MAC addresses loaded * by the bootloader get lost. */ - if (!(map->flags & SH7751_PCIC_NO_RESET)) { + if (!(map->flags & SH4_PCIC_NO_RESET)) { /* toggle PCI reset pin */ - word = SH7751_PCICR_PREFIX | SH7751_PCICR_PRST; - outl(word,PCI_REG(SH7751_PCICR)); + word = SH4_PCICR_PREFIX | SH4_PCICR_PRST; + pci_write_reg(word, SH4_PCICR); /* Wait for a long time... not 1 sec. but long enough */ mdelay(100); - word = SH7751_PCICR_PREFIX; - outl(word,PCI_REG(SH7751_PCICR)); + word = SH4_PCICR_PREFIX; + pci_write_reg(word, SH4_PCICR); } - + /* set the command/status bits to: * Wait Cycle Control + Parity Enable + Bus Master + * Mem space enable */ word = SH7751_PCICONF1_WCC | SH7751_PCICONF1_PER | SH7751_PCICONF1_BUM | SH7751_PCICONF1_MES; - outl(word, PCI_REG(SH7751_PCICONF1)); + pci_write_reg(word, SH7751_PCICONF1); /* define this host as the host bridge */ - word = SH7751_PCI_HOST_BRIDGE << 24; - outl(word, PCI_REG(SH7751_PCICONF2)); + word = PCI_BASE_CLASS_BRIDGE << 24; + pci_write_reg(word, SH7751_PCICONF2); /* Set IO and Mem windows to local address * Make PCI and local address the same for easy 1 to 1 mapping @@ -291,46 +129,49 @@ int __init sh7751_pcic_init(struct sh7751_pci_address_map *map) * Window1 = map->window1.size @ cached area base = SDRAM */ word = map->window0.size - 1; - outl(word, PCI_REG(SH7751_PCILSR0)); + pci_write_reg(word, SH4_PCILSR0); word = map->window1.size - 1; - outl(word, PCI_REG(SH7751_PCILSR1)); + pci_write_reg(word, SH4_PCILSR1); /* Set the values on window 0 PCI config registers */ word = P2SEGADDR(map->window0.base); - outl(word, PCI_REG(SH7751_PCILAR0)); - outl(word, PCI_REG(SH7751_PCICONF5)); + pci_write_reg(word, SH4_PCILAR0); + pci_write_reg(word, SH7751_PCICONF5); /* Set the values on window 1 PCI config registers */ word = PHYSADDR(map->window1.base); - outl(word, PCI_REG(SH7751_PCILAR1)); - outl(word, PCI_REG(SH7751_PCICONF6)); + pci_write_reg(word, SH4_PCILAR1); + pci_write_reg(word, SH7751_PCICONF6); - /* Set the local 16MB PCI memory space window to + /* Set the local 16MB PCI memory space window to * the lowest PCI mapped address */ - word = PCIBIOS_MIN_MEM & SH7751_PCIMBR_MASK; - PCIDBG(2,"PCI: Setting upper bits of Memory window to 0x%x\n", word); - outl(word , PCI_REG(SH7751_PCIMBR)); + word = PCIBIOS_MIN_MEM & SH4_PCIMBR_MASK; + pr_debug("PCI: Setting upper bits of Memory window to 0x%x\n", word); + pci_write_reg(word , SH4_PCIMBR); /* Map IO space into PCI IO window * The IO window is 64K-PCIBIOS_MIN_IO in size - * IO addresses will be translated to the + * IO addresses will be translated to the * PCI IO window base address */ - PCIDBG(3,"PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n", PCIBIOS_MIN_IO, - (64*1024), SH7751_PCI_IO_BASE+PCIBIOS_MIN_IO); + pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n", + PCIBIOS_MIN_IO, (64 << 10), + SH4_PCI_IO_BASE + PCIBIOS_MIN_IO); - /* + /* * XXX: For now, leave this board-specific. In the event we have other * boards that need to do similar work, this can be wrapped. */ #ifdef CONFIG_SH_BIGSUR - bigsur_port_map(PCIBIOS_MIN_IO, (64*1024), SH7751_PCI_IO_BASE+PCIBIOS_MIN_IO,0); + bigsur_port_map(PCIBIOS_MIN_IO, (64 << 10), + SH4_PCI_IO_BASE + PCIBIOS_MIN_IO, 0); #endif - /* Make sure the MSB's of IO window are set to access PCI space correctly */ - word = PCIBIOS_MIN_IO & SH7751_PCIIOBR_MASK; - PCIDBG(2,"PCI: Setting upper bits of IO window to 0x%x\n", word); - outl(word, PCI_REG(SH7751_PCIIOBR)); - + /* Make sure the MSB's of IO window are set to access PCI space + * correctly */ + word = PCIBIOS_MIN_IO & SH4_PCIIOBR_MASK; + pr_debug("PCI: Setting upper bits of IO window to 0x%x\n", word); + pci_write_reg(word, SH4_PCIIOBR); + /* Set PCI WCRx, BCRx's, copy from BSC locations */ /* check BCR for SDRAM in specified area */ @@ -349,13 +190,13 @@ int __init sh7751_pcic_init(struct sh7751_pci_address_map *map) /* configure the wait control registers */ word = inl(SH7751_WCR1); - outl(word, PCI_REG(SH7751_PCIWCR1)); + pci_write_reg(word, SH4_PCIWCR1); word = inl(SH7751_WCR2); - outl(word, PCI_REG(SH7751_PCIWCR2)); + pci_write_reg(word, SH4_PCIWCR2); word = inl(SH7751_WCR3); - outl(word, PCI_REG(SH7751_PCIWCR3)); + pci_write_reg(word, SH4_PCIWCR3); word = inl(SH7751_MCR); - outl(word, PCI_REG(SH7751_PCIMCR)); + pci_write_reg(word, SH4_PCIMCR); /* NOTE: I'm ignoring the PCI error IRQs for now.. * TODO: add support for the internal error interrupts and @@ -368,49 +209,8 @@ int __init sh7751_pcic_init(struct sh7751_pci_address_map *map) /* SH7751 init done, set central function init complete */ /* use round robin mode to stop a device starving/overruning */ - word = SH7751_PCICR_PREFIX | SH7751_PCICR_CFIN | SH7751_PCICR_ARBM; - outl(word,PCI_REG(SH7751_PCICR)); + word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_ARBM; + pci_write_reg(word, SH4_PCICR); return 1; } - -char * __init pcibios_setup(char *str) -{ - if (!strcmp(str, "off")) { - pci_probe = 0; - return NULL; - } - - return str; -} - -/* - * IRQ functions - */ -static u8 __init sh7751_no_swizzle(struct pci_dev *dev, u8 *pin) -{ - /* no swizzling */ - return PCI_SLOT(dev->devfn); -} - -static int sh7751_pci_lookup_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - int irq = -1; - - /* now lookup the actual IRQ on a platform specific basis (pci-'platform'.c) */ - irq = pcibios_map_platform_irq(slot,pin); - if( irq < 0 ) { - pr_debug("PCI: Error mapping IRQ on device %s\n", pci_name(dev)); - return irq; - } - - pr_debug("Setting IRQ for slot %s to %d\n", pci_name(dev), irq); - - return irq; -} - -void __init pcibios_fixup_irqs(void) -{ - pci_fixup_irqs(sh7751_no_swizzle, sh7751_pci_lookup_irq); -} - diff --git a/arch/sh/drivers/pci/pci-sh7751.h b/arch/sh/drivers/pci/pci-sh7751.h index 1fee5cae10d1..68e3cb5e6bec 100644 --- a/arch/sh/drivers/pci/pci-sh7751.h +++ b/arch/sh/drivers/pci/pci-sh7751.h @@ -3,7 +3,7 @@ * * Dustin McIntire (dustin@sensoria.com) (c) 2001 * Paul Mundt (lethal@linux-sh.org) (c) 2003 - * + * * May be copied or modified under the terms of the GNU General Public * License. See linux/COPYING for more information. * @@ -12,28 +12,6 @@ #ifndef _PCI_SH7751_H_ #define _PCI_SH7751_H_ -#include <linux/pci.h> - -/* set debug level 4=verbose...1=terse */ -//#define DEBUG_PCI 3 -#undef DEBUG_PCI - -#ifdef DEBUG_PCI -#define PCIDBG(n, x...) { if(DEBUG_PCI>=n) printk(x); } -#else -#define PCIDBG(n, x...) -#endif - -/* startup values */ -#define PCI_PROBE_BIOS 1 -#define PCI_PROBE_CONF1 2 -#define PCI_PROBE_CONF2 4 -#define PCI_NO_SORT 0x100 -#define PCI_BIOS_SORT 0x200 -#define PCI_NO_CHECKS 0x400 -#define PCI_ASSIGN_ROMS 0x1000 -#define PCI_BIOS_IRQ_SCAN 0x2000 - /* Platform Specific Values */ #define SH7751_VENDOR_ID 0x1054 #define SH7751_DEVICE_ID 0x3505 @@ -128,131 +106,6 @@ #define SH7751_PCICONF17_PMEN 0x00010000 /* PME Enable */ #define SH7751_PCICONF17_PWST 0x00000003 /* Power State */ /* SH7715 Internal PCI Registers */ -#define SH7751_PCICR 0x100 /* PCI Control Register */ - #define SH7751_PCICR_PREFIX 0xA5000000 /* CR prefix for write */ - #define SH7751_PCICR_TRSB 0x00000200 /* Target Read Single */ - #define SH7751_PCICR_BSWP 0x00000100 /* Target Byte Swap */ - #define SH7751_PCICR_PLUP 0x00000080 /* Enable PCI Pullup */ - #define SH7751_PCICR_ARBM 0x00000040 /* PCI Arbitration Mode */ - #define SH7751_PCICR_MD 0x00000030 /* MD9 and MD10 status */ - #define SH7751_PCICR_SERR 0x00000008 /* SERR output assert */ - #define SH7751_PCICR_INTA 0x00000004 /* INTA output assert */ - #define SH7751_PCICR_PRST 0x00000002 /* PCI Reset Assert */ - #define SH7751_PCICR_CFIN 0x00000001 /* Central Fun. Init Done */ -#define SH7751_PCILSR0 0x104 /* PCI Local Space Register0 */ -#define SH7751_PCILSR1 0x108 /* PCI Local Space Register1 */ -#define SH7751_PCILAR0 0x10C /* PCI Local Address Register1 */ -#define SH7751_PCILAR1 0x110 /* PCI Local Address Register1 */ -#define SH7751_PCIINT 0x114 /* PCI Interrupt Register */ - #define SH7751_PCIINT_MLCK 0x00008000 /* Master Lock Error */ - #define SH7751_PCIINT_TABT 0x00004000 /* Target Abort Error */ - #define SH7751_PCIINT_TRET 0x00000200 /* Target Retry Error */ - #define SH7751_PCIINT_MFDE 0x00000100 /* Master Func. Disable Error */ - #define SH7751_PCIINT_PRTY 0x00000080 /* Address Parity Error */ - #define SH7751_PCIINT_SERR 0x00000040 /* SERR Detection Error */ - #define SH7751_PCIINT_TWDP 0x00000020 /* Tgt. Write Parity Error */ - #define SH7751_PCIINT_TRDP 0x00000010 /* Tgt. Read Parity Error Det. */ - #define SH7751_PCIINT_MTABT 0x00000008 /* Master-Tgt. Abort Error */ - #define SH7751_PCIINT_MMABT 0x00000004 /* Master-Master Abort Error */ - #define SH7751_PCIINT_MWPD 0x00000002 /* Master Write PERR Detect */ - #define SH7751_PCIINT_MRPD 0x00000002 /* Master Read PERR Detect */ -#define SH7751_PCIINTM 0x118 /* PCI Interrupt Mask Register */ -#define SH7751_PCIALR 0x11C /* Error Address Register */ -#define SH7751_PCICLR 0x120 /* Error Command/Data Register */ - #define SH7751_PCICLR_MPIO 0x80000000 /* Error Command/Data Register */ - #define SH7751_PCICLR_MDMA0 0x40000000 /* DMA0 Transfer Error */ - #define SH7751_PCICLR_MDMA1 0x20000000 /* DMA1 Transfer Error */ - #define SH7751_PCICLR_MDMA2 0x10000000 /* DMA2 Transfer Error */ - #define SH7751_PCICLR_MDMA3 0x08000000 /* DMA3 Transfer Error */ - #define SH7751_PCICLR_TGT 0x04000000 /* Target Transfer Error */ - #define SH7751_PCICLR_CMDL 0x0000000F /* PCI Command at Error */ -#define SH7751_PCIAINT 0x130 /* Arbiter Interrupt Register */ - #define SH7751_PCIAINT_MBKN 0x00002000 /* Master Broken Interrupt */ - #define SH7751_PCIAINT_TBTO 0x00001000 /* Target Bus Time Out */ - #define SH7751_PCIAINT_MBTO 0x00001000 /* Master Bus Time Out */ - #define SH7751_PCIAINT_TABT 0x00000008 /* Target Abort */ - #define SH7751_PCIAINT_MABT 0x00000004 /* Master Abort */ - #define SH7751_PCIAINT_RDPE 0x00000002 /* Read Data Parity Error */ - #define SH7751_PCIAINT_WDPE 0x00000002 /* Write Data Parity Error */ -#define SH7751_PCIAINTM 0x134 /* Arbiter Int. Mask Register */ -#define SH7751_PCIBMLR 0x138 /* Error Bus Master Register */ - #define SH7751_PCIBMLR_REQ4 0x00000010 /* REQ4 bus master at error */ - #define SH7751_PCIBMLR_REQ3 0x00000008 /* REQ3 bus master at error */ - #define SH7751_PCIBMLR_REQ2 0x00000004 /* REQ2 bus master at error */ - #define SH7751_PCIBMLR_REQ1 0x00000002 /* REQ1 bus master at error */ - #define SH7751_PCIBMLR_REQ0 0x00000001 /* REQ0 bus master at error */ -#define SH7751_PCIDMABT 0x140 /* DMA Transfer Arb. Register */ - #define SH7751_PCIDMABT_RRBN 0x00000001 /* DMA Arbitor Round-Robin */ -#define SH7751_PCIDPA0 0x180 /* DMA0 Transfer Addr. Register */ -#define SH7751_PCIDLA0 0x184 /* DMA0 Local Addr. Register */ -#define SH7751_PCIDTC0 0x188 /* DMA0 Transfer Cnt. Register */ -#define SH7751_PCIDCR0 0x18C /* DMA0 Control Register */ - #define SH7751_PCIDCR_ALGN 0x00000600 /* DMA Alignment Mode */ - #define SH7751_PCIDCR_MAST 0x00000100 /* DMA Termination Type */ - #define SH7751_PCIDCR_INTM 0x00000080 /* DMA Interrupt Done Mask*/ - #define SH7751_PCIDCR_INTS 0x00000040 /* DMA Interrupt Done Status */ - #define SH7751_PCIDCR_LHLD 0x00000020 /* Local Address Control */ - #define SH7751_PCIDCR_PHLD 0x00000010 /* PCI Address Control*/ - #define SH7751_PCIDCR_IOSEL 0x00000008 /* PCI Address Space Type */ - #define SH7751_PCIDCR_DIR 0x00000004 /* DMA Transfer Direction */ - #define SH7751_PCIDCR_STOP 0x00000002 /* Force DMA Stop */ - #define SH7751_PCIDCR_STRT 0x00000001 /* DMA Start */ -#define SH7751_PCIDPA1 0x190 /* DMA1 Transfer Addr. Register */ -#define SH7751_PCIDLA1 0x194 /* DMA1 Local Addr. Register */ -#define SH7751_PCIDTC1 0x198 /* DMA1 Transfer Cnt. Register */ -#define SH7751_PCIDCR1 0x19C /* DMA1 Control Register */ -#define SH7751_PCIDPA2 0x1A0 /* DMA2 Transfer Addr. Register */ -#define SH7751_PCIDLA2 0x1A4 /* DMA2 Local Addr. Register */ -#define SH7751_PCIDTC2 0x1A8 /* DMA2 Transfer Cnt. Register */ -#define SH7751_PCIDCR2 0x1AC /* DMA2 Control Register */ -#define SH7751_PCIDPA3 0x1B0 /* DMA3 Transfer Addr. Register */ -#define SH7751_PCIDLA3 0x1B4 /* DMA3 Local Addr. Register */ -#define SH7751_PCIDTC3 0x1B8 /* DMA3 Transfer Cnt. Register */ -#define SH7751_PCIDCR3 0x1BC /* DMA3 Control Register */ -#define SH7751_PCIPAR 0x1C0 /* PIO Address Register */ - #define SH7751_PCIPAR_CFGEN 0x80000000 /* Configuration Enable */ - #define SH7751_PCIPAR_BUSNO 0x00FF0000 /* Config. Bus Number */ - #define SH7751_PCIPAR_DEVNO 0x0000FF00 /* Config. Device Number */ - #define SH7751_PCIPAR_REGAD 0x000000FC /* Register Address Number */ -#define SH7751_PCIMBR 0x1C4 /* Memory Base Address Register */ - #define SH7751_PCIMBR_MASK 0xFF000000 /* Memory Space Mask */ - #define SH7751_PCIMBR_LOCK 0x00000001 /* Lock Memory Space */ -#define SH7751_PCIIOBR 0x1C8 /* I/O Base Address Register */ - #define SH7751_PCIIOBR_MASK 0xFFFC0000 /* IO Space Mask */ - #define SH7751_PCIIOBR_LOCK 0x00000001 /* Lock IO Space */ -#define SH7751_PCIPINT 0x1CC /* Power Mgmnt Int. Register */ - #define SH7751_PCIPINT_D3 0x00000002 /* D3 Pwr Mgmt. Interrupt */ - #define SH7751_PCIPINT_D0 0x00000001 /* D0 Pwr Mgmt. Interrupt */ -#define SH7751_PCIPINTM 0x1D0 /* Power Mgmnt Mask Register */ -#define SH7751_PCICLKR 0x1D4 /* Clock Ctrl. Register */ - #define SH7751_PCICLKR_PCSTP 0x00000002 /* PCI Clock Stop */ - #define SH7751_PCICLKR_BCSTP 0x00000002 /* BCLK Clock Stop */ -/* For definitions of BCR, MCR see ... */ -#define SH7751_PCIBCR1 0x1E0 /* Memory BCR1 Register */ -#define SH7751_PCIBCR2 0x1E4 /* Memory BCR2 Register */ -#define SH7751_PCIWCR1 0x1E8 /* Wait Control 1 Register */ -#define SH7751_PCIWCR2 0x1EC /* Wait Control 2 Register */ -#define SH7751_PCIWCR3 0x1F0 /* Wait Control 3 Register */ -#define SH7751_PCIMCR 0x1F4 /* Memory Control Register */ -#define SH7751_PCIBCR3 0x1f8 /* Memory BCR3 Register */ -#define SH7751_PCIPCTR 0x200 /* Port Control Register */ - #define SH7751_PCIPCTR_P2EN 0x000400000 /* Port 2 Enable */ - #define SH7751_PCIPCTR_P1EN 0x000200000 /* Port 1 Enable */ - #define SH7751_PCIPCTR_P0EN 0x000100000 /* Port 0 Enable */ - #define SH7751_PCIPCTR_P2UP 0x000000020 /* Port2 Pull Up Enable */ - #define SH7751_PCIPCTR_P2IO 0x000000010 /* Port2 Output Enable */ - #define SH7751_PCIPCTR_P1UP 0x000000008 /* Port1 Pull Up Enable */ - #define SH7751_PCIPCTR_P1IO 0x000000004 /* Port1 Output Enable */ - #define SH7751_PCIPCTR_P0UP 0x000000002 /* Port0 Pull Up Enable */ - #define SH7751_PCIPCTR_P0IO 0x000000001 /* Port0 Output Enable */ -#define SH7751_PCIPDTR 0x204 /* Port Data Register */ - #define SH7751_PCIPDTR_PB5 0x000000020 /* Port 5 Enable */ - #define SH7751_PCIPDTR_PB4 0x000000010 /* Port 4 Enable */ - #define SH7751_PCIPDTR_PB3 0x000000008 /* Port 3 Enable */ - #define SH7751_PCIPDTR_PB2 0x000000004 /* Port 2 Enable */ - #define SH7751_PCIPDTR_PB1 0x000000002 /* Port 1 Enable */ - #define SH7751_PCIPDTR_PB0 0x000000001 /* Port 0 Enable */ -#define SH7751_PCIPDR 0x220 /* Port IO Data Register */ /* Memory Control Registers */ #define SH7751_BCR1 0xFF800000 /* Memory BCR1 Register */ @@ -274,30 +127,9 @@ #define SH7751_CS5_BASE_ADDR (SH7751_CS4_BASE_ADDR + SH7751_MEM_REGION_SIZE) #define SH7751_CS6_BASE_ADDR (SH7751_CS5_BASE_ADDR + SH7751_MEM_REGION_SIZE) -/* General PCI values */ -#define SH7751_PCI_HOST_BRIDGE 0x6 - -/* Flags */ -#define SH7751_PCIC_NO_RESET 0x0001 - -/* External functions defined per platform i.e. Big Sur, SE... (these could be routed - * through the machine vectors... */ -extern int pcibios_init_platform(void); -extern int pcibios_map_platform_irq(u8 slot, u8 pin); - -struct sh7751_pci_address_space { - unsigned long base; - unsigned long size; -}; - -struct sh7751_pci_address_map { - struct sh7751_pci_address_space window0; - struct sh7751_pci_address_space window1; - unsigned long flags; -}; +struct sh4_pci_address_map; /* arch/sh/drivers/pci/pci-sh7751.c */ -extern int sh7751_pcic_init(struct sh7751_pci_address_map *map); +int sh7751_pcic_init(struct sh4_pci_address_map *map); #endif /* _PCI_SH7751_H_ */ - diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index e09721330ac2..bd3064a82087 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -20,197 +20,36 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/pci.h> -#include <linux/sched.h> -#include <linux/ioport.h> #include <linux/errno.h> -#include <linux/irq.h> #include <linux/delay.h> - -#include <asm/machvec.h> -#include <asm/io.h> -#include "pci-sh7780.h" - -static unsigned int pci_probe = PCI_PROBE_CONF1; -extern int pci_fixup_pcic(void); - -/* - * Direct access to PCI hardware... - */ - -#define CONFIG_CMD(bus, devfn, where) (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3)) - -/* - * Functions for accessing PCI configuration space with type 1 accesses - */ -static int sh7780_pci_read(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 *val) -{ - unsigned long flags; - u32 data; - - /* - * PCIPDR may only be accessed as 32 bit words, - * so we must do byte alignment by hand - */ - local_irq_save(flags); - outl(CONFIG_CMD(bus, devfn, where), PCI_REG(SH7780_PCIPAR)); - data = inl(PCI_REG(SH7780_PCIPDR)); - local_irq_restore(flags); - - switch (size) { - case 1: - *val = (data >> ((where & 3) << 3)) & 0xff; - break; - case 2: - *val = (data >> ((where & 2) << 3)) & 0xffff; - break; - case 4: - *val = data; - break; - default: - return PCIBIOS_FUNC_NOT_SUPPORTED; - } - - return PCIBIOS_SUCCESSFUL; -} +#include "pci-sh4.h" /* - * Since SH7780 only does 32bit access we'll have to do a read, - * mask,write operation. - * We'll allow an odd byte offset, though it should be illegal. + * Initialization. Try all known PCI access methods. Note that we support + * using both PCI BIOS and direct access: in such cases, we use I/O ports + * to access config space. + * + * Note that the platform specific initialization (BSC registers, and memory + * space mapping) will be called via the platform defined function + * pcibios_init_platform(). */ -static int sh7780_pci_write(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 val) +static int __init sh7780_pci_init(void) { - unsigned long flags; - int shift; - u32 data; - - local_irq_save(flags); - outl(CONFIG_CMD(bus, devfn, where), PCI_REG(SH7780_PCIPAR)); - data = inl(PCI_REG(SH7780_PCIPDR)); - local_irq_restore(flags); - - switch (size) { - case 1: - shift = (where & 3) << 3; - data &= ~(0xff << shift); - data |= ((val & 0xff) << shift); - break; - case 2: - shift = (where & 2) << 3; - data &= ~(0xffff << shift); - data |= ((val & 0xffff) << shift); - break; - case 4: - data = val; - break; - default: - return PCIBIOS_FUNC_NOT_SUPPORTED; - } - - outl(data, PCI_REG(SH7780_PCIPDR)); - - return PCIBIOS_SUCCESSFUL; -} - -#undef CONFIG_CMD - -struct pci_ops sh7780_pci_ops = { - .read = sh7780_pci_read, - .write = sh7780_pci_write, -}; + unsigned int id; + int ret; -static int __init pci_check_direct(void) -{ - unsigned int tmp, id; + pr_debug("PCI: Starting intialization.\n"); outl(0x00000001, SH7780_PCI_VCR2); /* Enable PCIC */ /* check for SH7780/SH7780R hardware */ - id = inl(PCI_REG(SH7780_PCIVID)); + id = pci_read_reg(SH7780_PCIVID); if ((id != ((SH7780_DEVICE_ID << 16) | SH7780_VENDOR_ID)) && (id != ((SH7781_DEVICE_ID << 16) | SH7780_VENDOR_ID))) { printk(KERN_ERR "PCI: This is not an SH7780 (%x)\n", id); return -ENODEV; } - /* - * Check if configuration works. - */ - if (pci_probe & PCI_PROBE_CONF1) { - tmp = inl(PCI_REG(SH7780_PCIPAR)); - outl(0x80000000, PCI_REG(SH7780_PCIPAR)); - if (inl(PCI_REG(SH7780_PCIPAR)) == 0x80000000) { - outl(tmp, PCI_REG(SH7780_PCIPAR)); - printk(KERN_INFO "PCI: Using configuration type 1\n"); - request_region(PCI_REG(SH7780_PCIPAR), 8, "PCI conf1"); - return 0; - } - outl(tmp, PCI_REG(SH7780_PCIPAR)); - } - - pr_debug("PCI: pci_check_direct failed\n"); - return -EINVAL; -} - -/***************************************************************************************/ - -/* - * Handle bus scanning and fixups .... - */ - -static void __init pci_fixup_ide_bases(struct pci_dev *d) -{ - int i; - - /* - * PCI IDE controllers use non-standard I/O port decoding, respect it. - */ - if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE) - return; - pr_debug("PCI: IDE base address fixup for %s\n", pci_name(d)); - for(i=0; i<4; i++) { - struct resource *r = &d->resource[i]; - if ((r->start & ~0x80) == 0x374) { - r->start |= 2; - r->end = r->start; - } - } -} - -DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); - -/* - * Called after each bus is probed, but before its children - * are examined. - */ - -void __init pcibios_fixup_bus(struct pci_bus *b) -{ - pci_read_bridge_bases(b); -} - -/* - * Initialization. Try all known PCI access methods. Note that we support - * using both PCI BIOS and direct access: in such cases, we use I/O ports - * to access config space. - * - * Note that the platform specific initialization (BSC registers, and memory - * space mapping) will be called via the machine vectors (sh_mv.mv_pci_init()) if it - * exists and via the platform defined function pcibios_init_platform(). - * See pci_bigsur.c for implementation; - * - * The BIOS version of the pci functions is not yet implemented but it is left - * in for completeness. Currently an error will be genereated at compile time. - */ - -static int __init sh7780_pci_init(void) -{ - int ret; - - pr_debug("PCI: Starting intialization.\n"); - /* Setup the INTC */ ctrl_outl(0x00200000, INTC_ICR0); /* INTC SH-4 Mode */ ctrl_outl(0x00078000, INTC_INT2MSKCR); /* enable PCIINTA - PCIINTD */ @@ -219,15 +58,14 @@ static int __init sh7780_pci_init(void) ctrl_outl(0x80000000, INTC_INTMSKCLR1); /* enable IRL0-3 Interrupt */ ctrl_outl(0xfffe0000, INTC_INTMSKCLR2); /* enable IRL0-3 Interrupt */ - if ((ret = pci_check_direct()) != 0) + if ((ret = sh4_pci_check_direct()) != 0) return ret; return pcibios_init_platform(); } - core_initcall(sh7780_pci_init); -int __init sh7780_pcic_init(struct sh7780_pci_address_map *map) +int __init sh7780_pcic_init(struct sh4_pci_address_map *map) { u32 word; @@ -236,25 +74,25 @@ int __init sh7780_pcic_init(struct sh7780_pci_address_map *map) * bootloader and doing it here means the MAC addresses loaded * by the bootloader get lost. */ - if (!(map->flags & SH7780_PCIC_NO_RESET)) { + if (!(map->flags & SH4_PCIC_NO_RESET)) { /* toggle PCI reset pin */ - word = SH7780_PCICR_PREFIX | SH7780_PCICR_PRST; - outl(word,PCI_REG(SH7780_PCICR)); + word = SH4_PCICR_PREFIX | SH4_PCICR_PRST; + pci_write_reg(word, SH4_PCICR); /* Wait for a long time... not 1 sec. but long enough */ mdelay(100); - word = SH7780_PCICR_PREFIX; - outl(word,PCI_REG(SH7780_PCICR)); + word = SH4_PCICR_PREFIX; + pci_write_reg(word, SH4_PCICR); } /* set the command/status bits to: * Wait Cycle Control + Parity Enable + Bus Master + * Mem space enable */ - outl(0x00000046, PCI_REG(SH7780_PCICMD)); + pci_write_reg(0x00000046, SH7780_PCICMD); /* define this host as the host bridge */ - word = SH7780_PCI_HOST_BRIDGE << 24; - outl(word, PCI_REG(SH7780_PCIRID)); + word = PCI_BASE_CLASS_BRIDGE << 24; + pci_write_reg(word, SH7780_PCIRID); /* Set IO and Mem windows to local address * Make PCI and local address the same for easy 1 to 1 mapping @@ -262,25 +100,26 @@ int __init sh7780_pcic_init(struct sh7780_pci_address_map *map) * Window1 = map->window1.size @ cached area base = SDRAM */ word = ((map->window0.size - 1) & 0x1ff00001) | 0x01; - outl(0x07f00001, PCI_REG(SH7780_PCILSR0)); + pci_write_reg(0x07f00001, SH4_PCILSR0); word = ((map->window1.size - 1) & 0x1ff00001) | 0x01; - outl(0x00000001, PCI_REG(SH7780_PCILSR1)); + pci_write_reg(0x00000001, SH4_PCILSR1); /* Set the values on window 0 PCI config registers */ word = P2SEGADDR(map->window0.base); - outl(0xa8000000, PCI_REG(SH7780_PCILAR0)); - outl(0x08000000, PCI_REG(SH7780_PCIMBAR0)); + pci_write_reg(0xa8000000, SH4_PCILAR0); + pci_write_reg(0x08000000, SH7780_PCIMBAR0); /* Set the values on window 1 PCI config registers */ word = P2SEGADDR(map->window1.base); - outl(0x00000000, PCI_REG(SH7780_PCILAR1)); - outl(0x00000000, PCI_REG(SH7780_PCIMBAR1)); + pci_write_reg(0x00000000, SH4_PCILAR1); + pci_write_reg(0x00000000, SH7780_PCIMBAR1); /* Map IO space into PCI IO window * The IO window is 64K-PCIBIOS_MIN_IO in size * IO addresses will be translated to the * PCI IO window base address */ - PCIDBG(3,"PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n", PCIBIOS_MIN_IO, - (64*1024), SH7780_PCI_IO_BASE+PCIBIOS_MIN_IO); + pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n", + PCIBIOS_MIN_IO, (64 << 10), + SH7780_PCI_IO_BASE + PCIBIOS_MIN_IO); /* NOTE: I'm ignoring the PCI error IRQs for now.. * TODO: add support for the internal error interrupts and @@ -293,49 +132,8 @@ int __init sh7780_pcic_init(struct sh7780_pci_address_map *map) /* SH7780 init done, set central function init complete */ /* use round robin mode to stop a device starving/overruning */ - word = SH7780_PCICR_PREFIX | SH7780_PCICR_CFIN | /* SH7780_PCICR_ARBM |*/ SH7780_PCICR_FTO; - outl(word, PCI_REG(SH7780_PCICR)); + word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO; + pci_write_reg(word, SH4_PCICR); return 1; } - -char * __init pcibios_setup(char *str) -{ - if (!strcmp(str, "off")) { - pci_probe = 0; - return NULL; - } - - return str; -} - -/* - * IRQ functions - */ -static u8 __init sh7780_no_swizzle(struct pci_dev *dev, u8 *pin) -{ - /* no swizzling */ - return PCI_SLOT(dev->devfn); -} - -static int sh7780_pci_lookup_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - int irq = -1; - - /* now lookup the actual IRQ on a platform specific basis (pci-'platform'.c) */ - irq = pcibios_map_platform_irq(slot,pin); - if( irq < 0 ) { - pr_debug("PCI: Error mapping IRQ on device %s\n", pci_name(dev)); - return irq; - } - - pr_debug("Setting IRQ for slot %s to %d\n", pci_name(dev), irq); - - return irq; -} - -void __init pcibios_fixup_irqs(void) -{ - pci_fixup_irqs(sh7780_no_swizzle, sh7780_pci_lookup_irq); -} - diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h index 750d5d7753a2..f02d2180a4bc 100644 --- a/arch/sh/drivers/pci/pci-sh7780.h +++ b/arch/sh/drivers/pci/pci-sh7780.h @@ -12,28 +12,6 @@ #ifndef _PCI_SH7780_H_ #define _PCI_SH7780_H_ -#include <linux/pci.h> - -/* set debug level 4=verbose...1=terse */ -//#define DEBUG_PCI 3 -#undef DEBUG_PCI - -#ifdef DEBUG_PCI -#define PCIDBG(n, x...) { if(DEBUG_PCI>=n) printk(x); } -#else -#define PCIDBG(n, x...) -#endif - -/* startup values */ -#define PCI_PROBE_BIOS 1 -#define PCI_PROBE_CONF1 2 -#define PCI_PROBE_CONF2 4 -#define PCI_NO_SORT 0x100 -#define PCI_BIOS_SORT 0x200 -#define PCI_NO_CHECKS 0x400 -#define PCI_ASSIGN_ROMS 0x1000 -#define PCI_BIOS_IRQ_SCAN 0x2000 - /* Platform Specific Values */ #define SH7780_VENDOR_ID 0x1912 #define SH7780_DEVICE_ID 0x0002 @@ -47,15 +25,12 @@ /* SH7780 Specific Values */ #define SH7780_PCI_CONFIG_BASE 0xFD000000 /* Config space base addr */ #define SH7780_PCI_CONFIG_SIZE 0x01000000 /* Config space size */ + #define SH7780_PCI_MEMORY_BASE 0xFD000000 /* Memory space base addr */ #define SH7780_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */ -#if 1 + #define SH7780_PCI_IO_BASE 0xFE400000 /* IO space base address */ #define SH7780_PCI_IO_SIZE 0x00400000 /* Size of IO window */ -#else -#define SH7780_PCI_IO_BASE 0xFE200000 /* IO space base address */ -#define SH7780_PCI_IO_SIZE 0x00200000 /* Size of IO window */ -#endif #define SH7780_PCIREG_BASE 0xFE040000 /* PCI regs base address */ #define PCI_REG(n) (SH7780_PCIREG_BASE+n) @@ -90,44 +65,16 @@ #define SH7780_PCIPMCSR_BSE 0x046 #define SH7780_PCICDD 0x047 -/* SH7780 PCI Local Registers */ -#define SH7780_PCICR 0x100 /* PCI Control Register */ - #define SH7780_PCICR_PREFIX 0xA5000000 /* CR prefix for write */ - #define SH7780_PCICR_PFCS 0x00000800 /* TRDY/IRDY Enable */ - #define SH7780_PCICR_FTO 0x00000400 /* TRDY/IRDY Enable */ - #define SH7780_PCICR_PFE 0x00000200 /* Target Read Single */ - #define SH7780_PCICR_TBS 0x00000100 /* Target Byte Swap */ - #define SH7780_PCICR_ARBM 0x00000040 /* PCI Arbitration Mode */ - #define SH7780_PCICR_IOCS 0x00000004 /* INTA output assert */ - #define SH7780_PCICR_PRST 0x00000002 /* PCI Reset Assert */ - #define SH7780_PCICR_CFIN 0x00000001 /* Central Fun. Init Done */ -#define SH7780_PCILSR0 0x104 /* PCI Local Space Register0 */ -#define SH7780_PCILSR1 0x108 /* PCI Local Space Register1 */ -#define SH7780_PCILAR0 0x10C /* PCI Local Address Register1 */ -#define SH7780_PCILAR1 0x110 /* PCI Local Address Register1 */ -#define SH7780_PCIIR 0x114 /* PCI Interrupt Register */ -#define SH7780_PCIIMR 0x118 /* PCI Interrupt Mask Register */ -#define SH7780_PCIAIR 0x11C /* Error Address Register */ -#define SH7780_PCICIR 0x120 /* Error Command/Data Register */ -#define SH7780_PCIAINT 0x130 /* Arbiter Interrupt Register */ -#define SH7780_PCIAINTM 0x134 /* Arbiter Int. Mask Register */ -#define SH7780_PCIBMIR 0x138 /* Error Bus Master Register */ -#define SH7780_PCIPAR 0x1C0 /* PIO Address Register */ -#define SH7780_PCIPINT 0x1CC /* Power Management Int. Register */ -#define SH7780_PCIPINTM 0x1D0 /* Power Management Mask Register */ -#define SH7780_PCIMBR0 0x1E0 /* Memory Bank0 Register */ -#define SH7780_PCIMBMR0 0x1E4 /* Memory Bank0 Mask Register */ -#define SH7780_PCIMBR1 0x1E8 /* Memory Bank1 Register */ -#define SH7780_PCIMBMR1 0x1EC /* Memory Bank1 Mask Register */ -#define SH7780_PCIMBR2 0x1F0 /* Memory Bank2 Register */ -#define SH7780_PCIMBMR2 0x1F4 /* Memory Bank2 Mask Register */ -#define SH7780_PCIIOBR 0x1F8 /* Bank Register */ -#define SH7780_PCIIOBMR 0x1FC /* Bank Mask Register */ +#define SH7780_PCIMBR0 0x1E0 +#define SH7780_PCIMBMR0 0x1E4 +#define SH7780_PCIMBR2 0x1F0 +#define SH7780_PCIMBMR2 0x1F4 +#define SH7780_PCIIOBR 0x1F8 +#define SH7780_PCIIOBMR 0x1FC #define SH7780_PCICSCR0 0x210 /* Cache Snoop1 Cnt. Register */ #define SH7780_PCICSCR1 0x214 /* Cache Snoop2 Cnt. Register */ #define SH7780_PCICSAR0 0x218 /* Cache Snoop1 Addr. Register */ #define SH7780_PCICSAR1 0x21C /* Cache Snoop2 Addr. Register */ -#define SH7780_PCIPDR 0x220 /* Port IO Data Register */ /* General Memory Config Addresses */ #define SH7780_CS0_BASE_ADDR 0x0 @@ -139,30 +86,9 @@ #define SH7780_CS5_BASE_ADDR (SH7780_CS4_BASE_ADDR + SH7780_MEM_REGION_SIZE) #define SH7780_CS6_BASE_ADDR (SH7780_CS5_BASE_ADDR + SH7780_MEM_REGION_SIZE) -/* General PCI values */ -#define SH7780_PCI_HOST_BRIDGE 0x6 - -/* Flags */ -#define SH7780_PCIC_NO_RESET 0x0001 - -/* External functions defined per platform i.e. Big Sur, SE... (these could be routed - * through the machine vectors... */ -extern int pcibios_init_platform(void); -extern int pcibios_map_platform_irq(u8 slot, u8 pin); - -struct sh7780_pci_address_space { - unsigned long base; - unsigned long size; -}; - -struct sh7780_pci_address_map { - struct sh7780_pci_address_space window0; - struct sh7780_pci_address_space window1; - unsigned long flags; -}; +struct sh4_pci_address_map; /* arch/sh/drivers/pci/pci-sh7780.c */ -extern int sh7780_pcic_init(struct sh7780_pci_address_map *map); +int sh7780_pcic_init(struct sh4_pci_address_map *map); #endif /* _PCI_SH7780_H_ */ - diff --git a/arch/sh/drivers/pci/pci-st40.c b/arch/sh/drivers/pci/pci-st40.c index 7c81b8b65bb5..4ab5ea6b35fb 100644 --- a/arch/sh/drivers/pci/pci-st40.c +++ b/arch/sh/drivers/pci/pci-st40.c @@ -70,12 +70,6 @@ static void pci_set_rbar_region(unsigned int region, unsigned long localAddr, unsigned long pciOffset, unsigned long regionSize); -/* - * The pcibios_map_platform_irq function is defined in the appropriate - * board specific code and referenced here - */ -extern int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin); - static __init void SetPCIPLL(void) { { @@ -422,13 +416,6 @@ struct pci_ops st40pci_config_ops = { /* Everything hangs off this */ static struct pci_bus *pci_root_bus; - -static u8 __init no_swizzle(struct pci_dev *dev, u8 * pin) -{ - return PCI_SLOT(dev->devfn); -} - - static int __init pcibios_init(void) { extern unsigned long memory_start, memory_end; @@ -465,17 +452,11 @@ static int __init pcibios_init(void) /* ok, do the scan man */ pci_root_bus = pci_scan_bus(0, &st40pci_config_ops, NULL); pci_assign_unassigned_resources(); - pci_fixup_irqs(no_swizzle, pcibios_map_platform_irq); return 0; } - subsys_initcall(pcibios_init); -void __init pcibios_fixup_bus(struct pci_bus *bus) -{ -} - /* * Publish a region of local address space over the PCI bus * to other devices. diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index 285dffd12bd8..7377a8a8e161 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -21,6 +21,26 @@ #include <linux/init.h> #include <asm/io.h> +static inline u8 bridge_swizzle(u8 pin, u8 slot) +{ + return (((pin - 1) + slot) % 4) + 1; +} + +static u8 __init simple_swizzle(struct pci_dev *dev, u8 *pinp) +{ + u8 pin = *pinp; + + while (dev->bus->parent) { + pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); + /* Move up the chain of bridges. */ + dev = dev->bus->self; + } + *pinp = pin; + + /* The slot is the slot of the last bridge. */ + return PCI_SLOT(dev->devfn); +} + static int __init pcibios_init(void) { struct pci_channel *p; @@ -36,19 +56,26 @@ static int __init pcibios_init(void) /* scan the buses */ busno = 0; - for (p= board_pci_channels; p->pci_ops != NULL; p++) { + for (p = board_pci_channels; p->pci_ops != NULL; p++) { bus = pci_scan_bus(busno, p->pci_ops, p); - busno = bus->subordinate+1; + busno = bus->subordinate + 1; } - /* board-specific fixups */ - pcibios_fixup_irqs(); + pci_fixup_irqs(simple_swizzle, pcibios_map_platform_irq); return 0; } - subsys_initcall(pcibios_init); +/* + * Called after each bus is probed, but before its children + * are examined. + */ +void __init pcibios_fixup_bus(struct pci_bus *bus) +{ + pci_read_bridge_bases(bus); +} + void pcibios_update_resource(struct pci_dev *dev, struct resource *root, struct resource *res, int resource) @@ -192,11 +219,10 @@ void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) return NULL; } +EXPORT_SYMBOL(pci_iomap); void pci_iounmap(struct pci_dev *dev, void __iomem *addr) { iounmap(addr); } - -EXPORT_SYMBOL(pci_iomap); EXPORT_SYMBOL(pci_iounmap); diff --git a/arch/sh/kernel/cpu/sh4/Makefile b/arch/sh/kernel/cpu/sh4/Makefile index 3d5cafc71ae3..9611fab03b55 100644 --- a/arch/sh/kernel/cpu/sh4/Makefile +++ b/arch/sh/kernel/cpu/sh4/Makefile @@ -7,6 +7,9 @@ obj-y := ex.o probe.o obj-$(CONFIG_SH_FPU) += fpu.o obj-$(CONFIG_SH_STORE_QUEUES) += sq.o +# CPU subtype setup +obj-$(CONFIG_CPU_SUBTYPE_SH7780) += setup-sh7780.o + # Primary on-chip clocks (common) clock-$(CONFIG_CPU_SH4) := clock-sh4.o clock-$(CONFIG_CPU_SUBTYPE_SH73180) := clock-sh73180.o diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7780.c b/arch/sh/kernel/cpu/sh4/setup-sh7780.c new file mode 100644 index 000000000000..72493f259edc --- /dev/null +++ b/arch/sh/kernel/cpu/sh4/setup-sh7780.c @@ -0,0 +1,79 @@ +/* + * SH7780 Setup + * + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/serial.h> +#include <asm/sci.h> + +static struct resource rtc_resources[] = { + [0] = { + .start = 0xffe80000, + .end = 0xffe80000 + 0x58 - 1, + .flags = IORESOURCE_IO, + }, + [1] = { + /* Period IRQ */ + .start = 21, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* Carry IRQ */ + .start = 22, + .flags = IORESOURCE_IRQ, + }, + [3] = { + /* Alarm IRQ */ + .start = 23, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device rtc_device = { + .name = "sh-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(rtc_resources), + .resource = rtc_resources, +}; + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xffe00000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 40, 41, 43, 42 }, + }, { + .mapbase = 0xffe10000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 76, 77, 79, 78 }, + }, { + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct platform_device *sh7780_devices[] __initdata = { + &rtc_device, + &sci_device, +}; + +static int __init sh7780_devices_setup(void) +{ + return platform_add_devices(sh7780_devices, + ARRAY_SIZE(sh7780_devices)); +} +__initcall(sh7780_devices_setup); |