diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/sh/Makefile | 1 | ||||
| -rw-r--r-- | arch/sh/boards/landisk/Makefile | 7 | ||||
| -rw-r--r-- | arch/sh/boards/landisk/io.c | 322 | ||||
| -rw-r--r-- | arch/sh/boards/landisk/irq.c | 105 | ||||
| -rw-r--r-- | arch/sh/boards/landisk/landisk_pwb.c | 348 | ||||
| -rw-r--r-- | arch/sh/boards/landisk/rtc.c | 102 | ||||
| -rw-r--r-- | arch/sh/boards/landisk/setup.c | 218 | ||||
| -rw-r--r-- | arch/sh/configs/landisk_defconfig | 1373 | ||||
| -rw-r--r-- | arch/sh/tools/mach-types | 2 |
9 files changed, 2477 insertions, 1 deletions
diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 66cf0ea6d38f..e9112def48dd 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -105,6 +105,7 @@ machdir-$(CONFIG_SH_RTS7751R2D) := renesas/rts7751r2d machdir-$(CONFIG_SH_7751_SYSTEMH) := renesas/systemh machdir-$(CONFIG_SH_EDOSK7705) := renesas/edosk7705 machdir-$(CONFIG_SH_SH4202_MICRODEV) := superh/microdev +machdir-$(CONFIG_SH_LANDISK) := landisk machdir-$(CONFIG_SH_UNKNOWN) := unknown incdir-y := $(notdir $(machdir-y)) diff --git a/arch/sh/boards/landisk/Makefile b/arch/sh/boards/landisk/Makefile new file mode 100644 index 000000000000..60e75c6db0eb --- /dev/null +++ b/arch/sh/boards/landisk/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for I-O DATA DEVICE, INC. "LANDISK Series" +# + +obj-y := setup.o io.o irq.o rtc.o landisk_pwb.o + +obj-$(CONFIG_PCI) += pci.o diff --git a/arch/sh/boards/landisk/io.c b/arch/sh/boards/landisk/io.c new file mode 100644 index 000000000000..1f1679af09d0 --- /dev/null +++ b/arch/sh/boards/landisk/io.c @@ -0,0 +1,322 @@ +/* + * arch/sh/boards/landisk/io.c + * + * Copyright (C) 2001 Ian da Silva, Jeremy Siegel + * Based largely on io_se.c. + * + * I/O routine for I-O Data Device, Inc. LANDISK. + * + * Initial version only to support LAN access; some + * placeholder code from io_landisk.c left in with the + * expectation of later SuperIO and PCMCIA access. + */ +/* + * modifed by kogiidena + * 2005.03.03 + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <asm/io.h> +#include <asm/landisk/iodata_landisk.h> +#include <asm/addrspace.h> + +#include <linux/module.h> +#include <linux/pci.h> +#include "../../drivers/pci/pci-sh7751.h" + +extern void *area5_io_base; /* Area 5 I/O Base address */ +extern void *area6_io_base; /* Area 6 I/O Base address */ + +/* + * The 7751R LANDISK uses the built-in PCI controller (PCIC) + * of the 7751R processor, and has a SuperIO accessible via the PCI. + * The board also includes a PCMCIA controller on its memory bus, + * like the other Solution Engine boards. + */ + +#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR) +#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR) +#define PCI_IO_AREA SH7751_PCI_IO_BASE +#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE + +#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK)) + +#define maybebadio(name,port) \ + printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \ + #name, (port), (__u32) __builtin_return_address(0)) + +static inline void delay(void) +{ + ctrl_inw(0xa0000000); +} + +static inline unsigned long port2adr(unsigned int port) +{ + if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) + if (port == 0x3f6) + return ((unsigned long)area5_io_base + 0x2c); + else + return ((unsigned long)area5_io_base + PA_PIDE_OFFSET + + ((port - 0x1f0) << 1)); + else if ((0x170 <= port && port < 0x178) || port == 0x376) + if (port == 0x376) + return ((unsigned long)area6_io_base + 0x2c); + else + return ((unsigned long)area6_io_base + PA_SIDE_OFFSET + + ((port - 0x170) << 1)); + else + maybebadio(port2adr, (unsigned long)port); + + return port; +} + +/* In case someone configures the kernel w/o PCI support: in that */ +/* scenario, don't ever bother to check for PCI-window addresses */ + +/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */ +#if defined(CONFIG_PCI) +#define CHECK_SH7751_PCIIO(port) \ + ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE))) +#else +#define CHECK_SH_7751_PCIIO(port) (0) +#endif + +/* + * General outline: remap really low stuff [eventually] to SuperIO, + * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) + * is mapped through the PCI IO window. Stuff with high bits (PXSEG) + * should be way beyond the window, and is used w/o translation for + * compatibility. + */ +unsigned char landisk_inb(unsigned long port) +{ + if (PXSEG(port)) + return *(volatile unsigned char *)port; + else if (CHECK_SH7751_PCIIO(port)) + return *(volatile unsigned char *)PCI_IOMAP(port); + else + return (*(volatile unsigned short *)port2adr(port) & 0xff); +} + +unsigned char landisk_inb_p(unsigned long port) +{ + unsigned char v; + + if (PXSEG(port)) + v = *(volatile unsigned char *)port; + else if (CHECK_SH7751_PCIIO(port)) + v = *(volatile unsigned char *)PCI_IOMAP(port); + else + v = (*(volatile unsigned short *)port2adr(port) & 0xff); + delay(); + + return v; +} + +unsigned short landisk_inw(unsigned long port) +{ + if (PXSEG(port)) + return *(volatile unsigned short *)port; + else if (CHECK_SH7751_PCIIO(port)) + return *(volatile unsigned short *)PCI_IOMAP(port); + else + maybebadio(inw, port); + + return 0; +} + +unsigned int landisk_inl(unsigned long port) +{ + if (PXSEG(port)) + return *(volatile unsigned long *)port; + else if (CHECK_SH7751_PCIIO(port)) + return *(volatile unsigned long *)PCI_IOMAP(port); + else + maybebadio(inl, port); + + return 0; +} + +void landisk_outb(unsigned char value, unsigned long port) +{ + + if (PXSEG(port)) + *(volatile unsigned char *)port = value; + else if (CHECK_SH7751_PCIIO(port)) + *(volatile unsigned char *)PCI_IOMAP(port) = value; + else + *(volatile unsigned short *)port2adr(port) = value; +} + +void landisk_outb_p(unsigned char value, unsigned long port) +{ + if (PXSEG(port)) + *(volatile unsigned char *)port = value; + else if (CHECK_SH7751_PCIIO(port)) + *(volatile unsigned char *)PCI_IOMAP(port) = value; + else + *(volatile unsigned short *)port2adr(port) = value; + delay(); +} + +void landisk_outw(unsigned short value, unsigned long port) +{ + if (PXSEG(port)) + *(volatile unsigned short *)port = value; + else if (CHECK_SH7751_PCIIO(port)) + *(volatile unsigned short *)PCI_IOMAP(port) = value; + else + maybebadio(outw, port); +} + +void landisk_outl(unsigned int value, unsigned long port) +{ + if (PXSEG(port)) + *(volatile unsigned long *)port = value; + else if (CHECK_SH7751_PCIIO(port)) + *(volatile unsigned long *)PCI_IOMAP(port) = value; + else + maybebadio(outl, port); +} + +void landisk_insb(unsigned long port, void *addr, unsigned long count) +{ + if (PXSEG(port)) + while (count--) + *((unsigned char *)addr)++ = + *(volatile unsigned char *)port; + else if (CHECK_SH7751_PCIIO(port)) { + volatile __u8 *bp = (__u8 *) PCI_IOMAP(port); + + while (count--) + *((volatile unsigned char *)addr)++ = *bp; + } else { + volatile __u16 *p = (volatile unsigned short *)port2adr(port); + + while (count--) + *((unsigned char *)addr)++ = *p; + } +} + +void landisk_insw(unsigned long port, void *addr, unsigned long count) +{ + volatile __u16 *p; + + if (PXSEG(port)) + p = (volatile unsigned short *)port; + else if (CHECK_SH7751_PCIIO(port)) + p = (volatile unsigned short *)PCI_IOMAP(port); + else + p = (volatile unsigned short *)port2adr(port); + while (count--) + *((__u16 *) addr)++ = *p; +} + +void landisk_insl(unsigned long port, void *addr, unsigned long count) +{ + if (CHECK_SH7751_PCIIO(port)) { + volatile __u32 *p = (__u32 *) PCI_IOMAP(port); + + while (count--) + *((__u32 *) addr)++ = *p; + } else + maybebadio(insl, port); +} + +void landisk_outsb(unsigned long port, const void *addr, unsigned long count) +{ + if (PXSEG(port)) + while (count--) + *(volatile unsigned char *)port = + *((unsigned char *)addr)++; + else if (CHECK_SH7751_PCIIO(port)) { + volatile __u8 *bp = (__u8 *) PCI_IOMAP(port); + + while (count--) + *bp = *((volatile unsigned char *)addr)++; + } else { + volatile __u16 *p = (volatile unsigned short *)port2adr(port); + + while (count--) + *p = *((unsigned char *)addr)++; + } +} + +void landisk_outsw(unsigned long port, const void *addr, unsigned long count) +{ + volatile __u16 *p; + + if (PXSEG(port)) + p = (volatile unsigned short *)port; + else if (CHECK_SH7751_PCIIO(port)) + p = (volatile unsigned short *)PCI_IOMAP(port); + else + p = (volatile unsigned short *)port2adr(port); + while (count--) + *p = *((__u16 *) addr)++; +} + +void landisk_outsl(unsigned long port, const void *addr, unsigned long count) +{ + if (CHECK_SH7751_PCIIO(port)) { + volatile __u32 *p = (__u32 *) PCI_IOMAP(port); + + while (count--) + *p = *((__u32 *) addr)++; + } else + maybebadio(outsl, port); +} + +/* For read/write calls, just copy generic (pass-thru); PCIMBR is */ +/* already set up. For a larger memory space, these would need to */ +/* reset PCIMBR as needed on a per-call basis... */ + +unsigned char landisk_readb(unsigned long addr) +{ + return *(volatile unsigned char *)addr; +} + +unsigned short landisk_readw(unsigned long addr) +{ + return *(volatile unsigned short *)addr; +} + +unsigned int landisk_readl(unsigned long addr) +{ + return *(volatile unsigned long *)addr; +} + +void landisk_writeb(unsigned char b, unsigned long addr) +{ + *(volatile unsigned char *)addr = b; +} + +void landisk_writew(unsigned short b, unsigned long addr) +{ + *(volatile unsigned short *)addr = b; +} + +void landisk_writel(unsigned int b, unsigned long addr) +{ + *(volatile unsigned long *)addr = b; +} + +void *landisk_ioremap(unsigned long offset, unsigned long size) +{ + if (offset >= 0xfd000000) + return (void *)offset; + else + return (void *)P2SEGADDR(offset); +} + +void landisk_iounmap(void *addr) +{ +} + +/* Map ISA bus address to the real address. Only for PCMCIA. */ + +unsigned long landisk_isa_port2addr(unsigned long offset) +{ + return port2adr(offset); +} diff --git a/arch/sh/boards/landisk/irq.c b/arch/sh/boards/landisk/irq.c new file mode 100644 index 000000000000..1dcc3feb7a44 --- /dev/null +++ b/arch/sh/boards/landisk/irq.c @@ -0,0 +1,105 @@ +/* + * arch/sh/boards/landisk/irq.c + * + * Copyright (C) 2001 Ian da Silva, Jeremy Siegel + * Based largely on io_se.c. + * + * I/O routine for I-O Data Device, Inc. LANDISK. + * + * Initial version only to support LAN access; some + * placeholder code from io_landisk.c left in with the + * expectation of later SuperIO and PCMCIA access. + */ +/* + * modified by kogiidena + * 2005.03.03 + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/landisk/iodata_landisk.h> + +static void enable_landisk_irq(unsigned int irq); +static void disable_landisk_irq(unsigned int irq); + +/* shutdown is same as "disable" */ +#define shutdown_landisk_irq disable_landisk_irq + +static void ack_landisk_irq(unsigned int irq); +static void end_landisk_irq(unsigned int irq); + +static unsigned int startup_landisk_irq(unsigned int irq) +{ + enable_landisk_irq(irq); + return 0; /* never anything pending */ +} + +static void disable_landisk_irq(unsigned int irq) +{ + unsigned long flags; + unsigned char val; + unsigned char mask = 0xff ^ (0x01 << (irq - 5)); + + /* Set the priority in IPR to 0 */ + local_irq_save(flags); + val = ctrl_inb(PA_IMASK); + val &= mask; + ctrl_outb(val, PA_IMASK); + local_irq_restore(flags); +} + +static void enable_landisk_irq(unsigned int irq) +{ + unsigned long flags; + unsigned char val; + unsigned char value = (0x01 << (irq - 5)); + + /* Set priority in IPR back to original value */ + local_irq_save(flags); + val = ctrl_inb(PA_IMASK); + val |= value; + ctrl_outb(val, PA_IMASK); + local_irq_restore(flags); +} + +static void ack_landisk_irq(unsigned int irq) +{ + disable_landisk_irq(irq); +} + +static void end_landisk_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) + enable_landisk_irq(irq); +} + +static struct hw_interrupt_type landisk_irq_type = { + .typename = "LANDISK IRQ", + .startup = startup_landisk_irq, + .shutdown = shutdown_landisk_irq, + .enable = enable_landisk_irq, + .disable = disable_landisk_irq, + .ack = ack_landisk_irq, + .end = end_landisk_irq +}; + +static void make_landisk_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + irq_desc[irq].handler = &landisk_irq_type; + disable_landisk_irq(irq); +} + +/* + * Initialize IRQ setting + */ +void __init init_landisk_IRQ(void) +{ + int i; + + for (i = 5; i < 14; i++) + make_landisk_irq(i); +} diff --git a/arch/sh/boards/landisk/landisk_pwb.c b/arch/sh/boards/landisk/landisk_pwb.c new file mode 100644 index 000000000000..e75cb578a28b --- /dev/null +++ b/arch/sh/boards/landisk/landisk_pwb.c @@ -0,0 +1,348 @@ +/* + * arch/sh/boards/landisk/landisk_pwb.c -- driver for the Power control switch. + * + * This driver will also support the I-O DATA Device, Inc. LANDISK Board. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copylight (C) 2002 Atom Create Engineering Co., Ltd. + * + * LED control drive function added by kogiidena + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/signal.h> +#include <linux/major.h> +#include <linux/poll.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/timer.h> +#include <linux/interrupt.h> + +#include <asm/system.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/uaccess.h> +#include <asm/landisk/iodata_landisk.h> + +#define SHUTDOWN_BTN_MINOR 1 /* Shutdown button device minor no. */ +#define LED_MINOR 21 /* LED minor no. */ +#define BTN_MINOR 22 /* BUTTON minor no. */ +#define GIO_MINOR 40 /* GIO minor no. */ + +static int openCnt; +static int openCntLED; +static int openCntGio; +static int openCntBtn; +static int landisk_btn; +static int landisk_btnctrlpid; +/* + * Functions prototypes + */ + +static int gio_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, + unsigned long arg); + +static int swdrv_open(struct inode *inode, struct file *filp) +{ + int minor; + + minor = MINOR(inode->i_rdev); + filp->private_data = (void *)minor; + + if (minor == SHUTDOWN_BTN_MINOR) { + if (openCnt > 0) { + return -EALREADY; + } else { + openCnt++; + return 0; + } + } else if (minor == LED_MINOR) { + if (openCntLED > 0) { + return -EALREADY; + } else { + openCntLED++; + return 0; + } + } else if (minor == BTN_MINOR) { + if (openCntBtn > 0) { + return -EALREADY; + } else { + openCntBtn++; + return 0; + } + } else if (minor == GIO_MINOR) { + if (openCntGio > 0) { + return -EALREADY; + } else { + openCntGio++; + return 0; + } + } + return -ENOENT; + +} + +static int swdrv_close(struct inode *inode, struct file *filp) +{ + int minor; + + minor = MINOR(inode->i_rdev); + if (minor == SHUTDOWN_BTN_MINOR) { + openCnt--; + } else if (minor == LED_MINOR) { + openCntLED--; + } else if (minor == BTN_MINOR) { + openCntBtn--; + } else if (minor == GIO_MINOR) { + openCntGio--; + } + return 0; +} + +static int swdrv_read(struct file *filp, char *buff, size_t count, + loff_t * ppos) +{ + int minor; + minor = (int)(filp->private_data); + + if (!access_ok(VERIFY_WRITE, (void *)buff, count)) + return -EFAULT; + + if (minor == SHUTDOWN_BTN_MINOR) { + if (landisk_btn & 0x10) { + put_user(1, buff); + return 1; + } else { + return 0; + } + } + return 0; +} + +static int swdrv_write(struct file *filp, const char *buff, size_t count, + loff_t * ppos) +{ + int minor; + minor = (int)(filp->private_data); + + if (minor == SHUTDOWN_BTN_MINOR) { + return count; + } + return count; +} + +static irqreturn_t sw_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + landisk_btn = (0x0ff & (~ctrl_inb(PA_STATUS))); + disable_irq(IRQ_BUTTON); + disable_irq(IRQ_POWER); + ctrl_outb(0x00, PA_PWRINT_CLR); + + if (landisk_btnctrlpid != 0) { + kill_proc(landisk_btnctrlpid, SIGUSR1, 1); + landisk_btnctrlpid = 0; + } + + return IRQ_HANDLED; +} + +static struct file_operations swdrv_fops = { + .read = swdrv_read, /* read */ + .write = swdrv_write, /* write */ + .open = swdrv_open, /* open */ + .release = swdrv_close, /* release */ + .ioctl = gio_ioctl, /* ioctl */ + +}; + +static char banner[] __initdata = + KERN_INFO "LANDISK and USL-5P Button, LED and GIO driver initialized\n"; + +int __init swdrv_init(void) +{ + int error; + + printk("%s", banner); + + openCnt = 0; + openCntLED = 0; + openCntBtn = 0; + openCntGio = 0; + landisk_btn = 0; + landisk_btnctrlpid = 0; + + if ((error = register_chrdev(SHUTDOWN_BTN_MAJOR, "swdrv", &swdrv_fops))) { + printk(KERN_ERR + "Button, LED and GIO driver:Couldn't register driver, error=%d\n", + error); + return 1; + } + + if (request_irq(IRQ_POWER, sw_interrupt, 0, "SHUTDOWNSWITCH", NULL)) { + printk(KERN_ERR "Unable to get IRQ 11.\n"); + return 1; + } + if (request_irq(IRQ_BUTTON, sw_interrupt, 0, "USL-5P BUTTON", NULL)) { + printk(KERN_ERR "Unable to get IRQ 12.\n"); + return 1; + } + ctrl_outb(0x00, PA_PWRINT_CLR); + + return 0; +} + +module_init(swdrv_init); + +/* + * gio driver + * + */ + +#include <asm/landisk/gio.h> + +static int gio_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg) +{ + int minor; + unsigned int data, mask; + static unsigned int addr = 0; + + minor = (int)(filp->private_data); + + /* access control */ + if (minor == GIO_MINOR) { + ; + } else if (minor == LED_MINOR) { + if (((cmd & 0x0ff) >= 9) && ((cmd & 0x0ff) < 20)) { + ; + } else { + return -EINVAL; + } + } else if (minor == BTN_MINOR) { + if (((cmd & 0x0ff) >= 20) && ((cmd & 0x0ff) < 30)) { + ; + } else { + return -EINVAL; + } + } else { + return -EINVAL; + } + + if (cmd & 0x01) { /* write */ + if (copy_from_user(&data, (int *)arg, sizeof(int))) { + return -EFAULT; + } + } + + switch (cmd) { + case GIODRV_IOCSGIOSETADDR: /* addres set */ + addr = data; + break; + + case GIODRV_IOCSGIODATA1: /* write byte */ + ctrl_outb((unsigned char)(0x0ff & data), addr); + break; + + case GIODRV_IOCSGIODATA2: /* write word */ + if (addr & 0x01) { + return -EFAULT; + } + ctrl_outw((unsigned short int)(0x0ffff & data), addr); + break; + + case GIODRV_IOCSGIODATA4: /* write long */ + if (addr & 0x03) { + return -EFAULT; + } + ctrl_outl(data, addr); + break; + + case GIODRV_IOCGGIODATA1: /* read byte */ + data = ctrl_inb(addr); + break; + + case GIODRV_IOCGGIODATA2: /* read word */ + if (addr & 0x01) { + return -EFAULT; + } + data = ctrl_inw(addr); + break; + + case GIODRV_IOCGGIODATA4: /* read long */ + if (addr & 0x03) { + return -EFAULT; + } + data = ctrl_inl(addr); + break; + case GIODRV_IOCSGIO_LED: /* write */ + mask = ((data & 0x00ffffff) << 8) + | ((data & 0x0000ffff) << 16) + | ((data & 0x000000ff) << 24); + landisk_ledparam = data & (~mask); + if (landisk_arch == 0) { /* arch == landisk */ + landisk_ledparam &= 0x03030303; + mask = (~(landisk_ledparam >> 22)) & 0x000c; + landisk_ledparam |= mask; + } else { /* arch == usl-5p */ + mask = (landisk_ledparam >> 24) & 0x0001; + landisk_ledparam |= mask; + landisk_ledparam &= 0x007f7f7f; + } + landisk_ledparam |= 0x80; + break; + case GIODRV_IOCGGIO_LED: /* read */ + data = landisk_ledparam; + if (landisk_arch == 0) { /* arch == landisk */ + data &= 0x03030303; + } else { /* arch == usl-5p */ + ; + } + data &= (~0x080); + break; + case GIODRV_IOCSGIO_BUZZER: /* write */ + landisk_buzzerparam = data; + landisk_ledparam |= 0x80; + break; + case GIODRV_IOCGGIO_LANDISK: /* read */ + data = landisk_arch & 0x01; + break; + case GIODRV_IOCGGIO_BTN: /* read */ + data = (0x0ff & ctrl_inb(PA_PWRINT_CLR)); + data <<= 8; + data |= (0x0ff & ctrl_inb(PA_IMASK)); + data <<= 8; + data |= (0x0ff & landisk_btn); + data <<= 8; + data |= (0x0ff & (~ctrl_inb(PA_STATUS))); + break; + case GIODRV_IOCSGIO_BTNPID: /* write */ + landisk_btnctrlpid = data; + landisk_btn = 0; + if (irq_desc[IRQ_BUTTON].depth) { + enable_irq(IRQ_BUTTON); + } + if (irq_desc[IRQ_POWER].depth) { + enable_irq(IRQ_POWER); + } + break; + case GIODRV_IOCGGIO_BTNPID: /* read */ + data = landisk_btnctrlpid; + break; + default: + return -EFAULT; + break; + } + + if ((cmd & 0x01) == 0) { /* read */ + if (copy_to_user((int *)arg, &data, sizeof(int))) { + return -EFAULT; + } + } + return 0; +} diff --git a/arch/sh/boards/landisk/rtc.c b/arch/sh/boards/landisk/rtc.c new file mode 100644 index 000000000000..d666aa63303f --- /dev/null +++ b/arch/sh/boards/landisk/rtc.c @@ -0,0 +1,102 @@ +/* + * arch/sh/boards/landisk/rtc.c -- RTC support + * + * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org> + * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka + */ +/* + * modifed by kogiidena + * 2005.09.16 + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/time.h> +#include <linux/delay.h> +#include <linux/spinlock.h> + +#ifndef BCD_TO_BIN +#define BCD_TO_BIN(val) ((val)=((val)&15) + ((val)>>4)*10) +#endif + +#ifndef BIN_TO_BCD +#define BIN_TO_BCD(val) ((val)=(((val)/10)<<4) + (val)%10) +#endif + +extern void (*rtc_get_time) (struct timespec *); +extern int (*rtc_set_time) (const time_t); +extern spinlock_t rtc_lock; + +extern void +rs5c313_set_cmos_time(unsigned int BCD_yr, unsigned int BCD_mon, + unsigned int BCD_day, unsigned int BCD_hr, + unsigned int BCD_min, unsigned int BCD_sec); + +extern unsigned long +rs5c313_get_cmos_time(unsigned int *BCD_yr, unsigned int *BCD_mon, + unsigned int *BCD_day, unsigned int *BCD_hr, + unsigned int *BCD_min, unsigned int *BCD_sec); + +void landisk_rtc_gettimeofday(struct timespec *tv) +{ + unsigned int BCD_yr, BCD_mon, BCD_day, BCD_hr, BCD_min, BCD_sec; + unsigned long flags; + + spin_lock_irqsave(&rtc_lock, flags); + tv->tv_sec = rs5c313_get_cmos_time + (&BCD_yr, &BCD_mon, &BCD_day, &BCD_hr, &BCD_min, &BCD_sec); + tv->tv_nsec = 0; + spin_unlock_irqrestore(&rtc_lock, flags); +} + +int landisk_rtc_settimeofday(const time_t secs) +{ + int retval = 0; + int real_seconds, real_minutes, cmos_minutes; + unsigned long flags; + unsigned long nowtime = secs; + unsigned int BCD_yr, BCD_mon, BCD_day, BCD_hr, BCD_min, BCD_sec; + + spin_lock_irqsave(&rtc_lock, flags); + + rs5c313_get_cmos_time + (&BCD_yr, &BCD_mon, &BCD_day, &BCD_hr, &BCD_min, &BCD_sec); + cmos_minutes = BCD_min; + BCD_TO_BIN(cmos_minutes); + + /* + * since we're only adjusting minutes and seconds, + * don't interfere with hour overflow. This avoids + * messing with unknown time zones but requires your + * RTC not to be off by more than 15 minutes + */ + real_seconds = nowtime % 60; + real_minutes = nowtime / 60; + if (((abs(real_minutes - cmos_minutes) + 15) / 30) & 1) + real_minutes += 30; /* correct for half hour time zone */ + real_minutes %= 60; + + if (abs(real_minutes - cmos_minutes) < 30) { + BIN_TO_BCD(real_seconds); + BIN_TO_BCD(real_minutes); + rs5c313_set_cmos_time(BCD_yr, BCD_mon, BCD_day, BCD_hr, + real_minutes, real_seconds); + } else { + printk(KERN_WARNING + "set_rtc_time: can't update from %d to %d\n", + cmos_minutes, real_minutes); + retval = -1; + } + + spin_unlock_irqrestore(&rtc_lock, flags); + return retval; +} + + +void landisk_time_init(void) +{ + rtc_get_time = landisk_rtc_gettimeofday; + rtc_set_time = landisk_rtc_settimeofday; +} diff --git a/arch/sh/boards/landisk/setup.c b/arch/sh/boards/landisk/setup.c new file mode 100644 index 000000000000..0c60eaa10ba7 --- /dev/null +++ b/arch/sh/boards/landisk/setup.c @@ -0,0 +1,218 @@ +/* + * arch/sh/boards/landisk/setup.c + * + * Copyright (C) 2002 Paul Mundt + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Setup code for an unknown machine (internal peripherials only) + */ +/* + * linux/arch/sh/kernel/setup_landisk.c + * + * Copyright (C) 2000 Kazumoto Kojima + * + * I-O DATA Device, Inc. LANDISK Support. + * + * Modified for LANDISK by + * Atom Create Engineering Co., Ltd. 2002. + */ +/* + * modifed by kogiidena + * 2005.09.16 + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/pm.h> + +#include <linux/hdreg.h> +#include <linux/ide.h> +#include <linux/pci.h> + +#include <asm/machvec.h> +#include <asm/rtc.h> +#include <asm/machvec_init.h> +#include <asm/io.h> +#include <asm/landisk/iodata_landisk.h> +#include <asm/landisk/io.h> + +#include <linux/mm.h> +#include <linux/vmalloc.h> + +extern void (*board_time_init) (void); +void landisk_time_init(void); +extern void init_landisk_IRQ(void); + +int landisk_ledparam; +int landisk_buzzerparam; +int landisk_arch; + +/* defined in mm/ioremap.c */ +extern void *p3_ioremap(unsigned long phys_addr, unsigned long size, + unsigned long flags); + +/* + * Initialize the board + */ + +const char *get_system_type(void) +{ + return "LANDISK"; +} + +static void landisk_power_off(void) +{ + ctrl_outb(0x01, PA_SHUTDOWN); +} + +void check_usl5p(void) +{ + volatile unsigned char *p = (volatile unsigned char *)PA_LED; + unsigned char tmp1, tmp2; + tmp1 = *p; + *p = 0x40; + tmp2 = *p; + *p = tmp1; + landisk_arch = (tmp2 == 0x40) ? 1 : 0; + if (landisk_arch == 1) { /* arch == usl-5p */ + landisk_ledparam = 0x00000380; + landisk_ledparam |= (tmp1 & 0x07c); + } else { /* arch == landisk */ + landisk_ledparam = 0x02000180; + landisk_ledparam |= 0x04; + } + return; +} + +void __init platform_setup(void) +{ + + landisk_buzzerparam = 0; + check_usl5p(); + + printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n"); + board_time_init = landisk_time_init; + pm_power_off = landisk_power_off; + +} + +void *area5_io_base; +void *area6_io_base; + +int __init cf_init(void) +{ + pgprot_t prot; + unsigned long paddrbase, psize; + + /* open I/O area window */ + paddrbase = virt_to_phys((void *)PA_AREA5_IO); + psize = PAGE_SIZE; + prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16); + area5_io_base = p3_ioremap(paddrbase, psize, prot.pgprot); + if (!area5_io_base) { + printk("allocate_cf_area : can't open CF I/O window!\n"); + return -ENOMEM; + } + + paddrbase = virt_to_phys((void *)PA_AREA6_IO); + psize = PAGE_SIZE; + prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_IO16); + area6_io_base = p3_ioremap(paddrbase, psize, prot.pgprot); + if (!area6_io_base) { + printk("allocate_cf_area : can't open HDD I/O window!\n"); + return -ENOMEM; + } + + printk(KERN_INFO "Allocate Area5/6 success.\n"); + + /* XXX : do we need attribute and common-memory area also? */ + + return 0; +} + +__initcall(cf_init); + +#include <linux/sched.h> + +/* Cycle the LED's in the clasic knightrider/Sun pattern */ + +void heartbeat_landisk(void) +{ + static unsigned int cnt = 0, blink = 0x00, period = 25; + volatile unsigned char *p = (volatile unsigned char *)PA_LED; + char data; + + if ((landisk_ledparam & 0x080) == 0) { + return; + } + cnt += 1; + if (cnt < period) { + return; + } + cnt = 0; + blink++; + + data = (blink & 0x01) ? (landisk_ledparam >> 16) : 0; + data |= (blink & 0x02) ? (landisk_ledparam >> 8) : 0; + data |= landisk_ledparam; + + /* buzzer */ + if (landisk_buzzerparam & 0x1) { + data |= 0x80; + } else { + data &= 0x7f; + } + *p = data; + + if (((landisk_ledparam & 0x007f7f00) == 0) + && (landisk_buzzerparam == 0)) { + landisk_ledparam &= (~0x0080); + } + landisk_buzzerparam >>= 1; +} + +/* + * The Machine Vector + */ + +struct sh_machine_vector mv_landisk __initmv = { + .mv_nr_irqs = 72, + .mv_inb = landisk_inb, + .mv_inw = landisk_inw, + .mv_inl = landisk_inl, + .mv_outb = landisk_outb, + .mv_outw = landisk_outw, + .mv_outl = landisk_outl, + .mv_inb_p = landisk_inb_p, + .mv_inw_p = landisk_inw, + .mv_inl_p = landisk_inl, + .mv_outb_p = landisk_outb_p, + .mv_outw_p = landisk_outw, + .mv_outl_p = landisk_outl, + .mv_insb = landisk_insb, + .mv_insw = landisk_insw, + .mv_insl = landisk_insl, + .mv_outsb = landisk_outsb, + .mv_outsw = landisk_outsw, + .mv_outsl = landisk_outsl, + .mv_readb = landisk_readb, + .mv_readw = landisk_readw, + .mv_readl = landisk_readl, + .mv_writeb = landisk_writeb, + .mv_writew = landisk_writew, + .mv_writel = landisk_writel, + .mv_ioremap = landisk_ioremap, + .mv_iounmap = landisk_iounmap, + .mv_isa_port2addr = landisk_isa_port2addr, + .mv_init_irq = init_landisk_IRQ, + +#ifdef CONFIG_HEARTBEAT + .mv_heartbeat = heartbeat_landisk, +#endif + +}; + +ALIAS_MV(landisk) diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig new file mode 100644 index 000000000000..6b43316d03cf --- /dev/null +++ b/arch/sh/configs/landisk_defconfig @@ -0,0 +1,1373 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.13-sh +# Sun Sep 11 13:00:46 2005 +# +CONFIG_SUPERH=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_IOMAP=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# System type +# +# CONFIG_SH_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SOLUTION_ENGINE is not set +# CONFIG_SH_7300_SOLUTION_ENGINE is not set +# CONFIG_SH_73180_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SYSTEMH is not set +# CONFIG_SH_STB1_HARP is not set +# CONFIG_SH_STB1_OVERDRIVE is not set +# CONFIG_SH_HP6XX is not set +# CONFIG_SH_CQREEK is not set +# CONFIG_SH_DMIDA is not set +# CONFIG_SH_EC3104 is not set +# CONFIG_SH_SATURN is not set +# CONFIG_SH_DREAMCAST is not set +# CONFIG_SH_CAT68701 is not set +# CONFIG_SH_BIGSUR is not set +# CONFIG_SH_SH2000 is not set +# CONFIG_SH_ADX is not set +# CONFIG_SH_MPC1211 is not set +# CONFIG_SH_SH03 is not set +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_HS7751RVOIP is not set +# CONFIG_SH_RTS7751R2D is not set +# CONFIG_SH_EDOSK7705 is not set +# CONFIG_SH_SH4202_MICRODEV is not set +CONFIG_SH_LANDISK=y +# CONFIG_SH_TITAN is not set +# CONFIG_SH_UNKNOWN is not set + +# +# Processor selection +# +CONFIG_CPU_SH4=y + +# +# SH-2 Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7604 is not set + +# +# SH-3 Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set + +# +# SH-4 Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +CONFIG_CPU_SUBTYPE_SH7751=y +CONFIG_CPU_SUBTYPE_SH7751R=y +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set + +# +# ST40 Processor Support +# +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set + +# +# SH-4A Processor Support +# +# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set + +# +# Memory management options +# +CONFIG_MMU=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +# CONFIG_SH_WRITETHROUGH is not set +# CONFIG_SH_OCRAM is not set +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x04000000 + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_SH_FPU=y +# CONFIG_SH_STORE_QUEUES is not set + +# +# Timer support +# +CONFIG_SH_TMU=y +CONFIG_SH_PCLK_FREQ_BOOL=y +CONFIG_SH_PCLK_FREQ=33333333 + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +CONFIG_SH_DMA=y +CONFIG_NR_ONCHIP_DMA_CHANNELS=4 +# CONFIG_NR_DMA_CHANNELS_BOOL is not set + +# +# Companion Chips +# +# CONFIG_HD6446X_SERIES is not set +CONFIG_HEARTBEAT=y + +# +# Kernel features +# +CONFIG_KEXEC=y +# CONFIG_PREEMPT is not set +# CONFIG_SMP is not set + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +# CONFIG_UBC_WAKEUP is not set +# CONFIG_CMDLINE_BOOL is not set + +# +# Bus options +# +CONFIG_ISA=y +CONFIG_PCI=y +CONFIG_SH_PCIDMA_NONCOHERENT=y +CONFIG_PCI_AUTO=y +CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +CONFIG_PCI_LEGACY_PROC=y + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +CONFIG_YENTA=y +# CONFIG_PD6729 is not set +# CONFIG_I82092 is not set +# CONFIG_I82365 is not set +# CONFIG_TCIC is not set +CONFIG_PCMCIA_PROBE=y +CONFIG_PCCARD_NONSTATIC=y + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_MULTIPLE_TABLES is not set +# CONFIG_IP_ROUTE_MULTIPATH is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +CONFIG_IP_NF_CT_ACCT=y +CONFIG_IP_NF_CONNTRACK_MARK=y +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +# CONFIG_IP_NF_CT_PROTO_SCTP is not set +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_CONNMARK=m +# CONFIG_IP_NF_MATCH_CONNBYTES is not set +CONFIG_IP_NF_MATCH_HASHLIMIT=m +# CONFIG_IP_NF_MATCH_STRING is not set +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +# CONFIG_IP_NF_TARGET_NFQUEUE is not set +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +# CONFIG_IP_NF_NAT_SNMP_BASIC is not set +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +# CONFIG_IP_NF_TARGET_TTL is not set +CONFIG_IP_NF_TARGET_CONNMARK=m +# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +CONFIG_ATALK=m +# CONFIG_DEV_APPLETALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNP is not set + +# +# Block devices +# +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECS is not set +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +CONFIG_BLK_DEV_IDESCSI=y +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +CONFIG_BLK_DEV_OFFBOARD=y +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +CONFIG_IDEDMA_ONLYDISK=y +CONFIG_BLK_DEV_AEC62XX=y +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +CONFIG_IDE_SH=y +# CONFIG_IDE_ARM is not set +# CONFIG_IDE_CHIPSETS is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AHA152X is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_IN2000 is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_DTC3280 is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GENERIC_NCR5380 is not set +# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_NCR53C406A is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_PAS16 is not set +# CONFIG_SCSI_PSI240I is not set +# CONFIG_SCSI_QLOGIC_FAS is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_SYM53C416 is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_T128 is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# PCMCIA SCSI adapter support +# +# CONFIG_PCMCIA_AHA152X is not set +# CONFIG_PCMCIA_FDOMAIN is not set +# CONFIG_PCMCIA_NINJA_SCSI is not set +# CONFIG_PCMCIA_QLOGIC is not set +# CONFIG_PCMCIA_SYM53C500 is not set + +# +# Old CD-ROM drivers (not SCSI, not IDE) +# +# CONFIG_CD_NO_IDESCSI is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID5 is not set +# CONFIG_MD_RAID6 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set +# CONFIG_BLK_DEV_DM is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_STNIC is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_SMC is not set +# CONFIG_SMC91X is not set +# CONFIG_NET_VENDOR_RACAL is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_AT1700 is not set +# CONFIG_DEPCA is not set +# CONFIG_HP100 is not set +# CONFIG_NET_ISA is not set +# CONFIG_NE2000 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_AC3200 is not set +# CONFIG_APRICOT is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_CS89x0 is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +CONFIG_8139CP=y +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# PCMCIA network device support +# +# CONFIG_NET_PCMCIA is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +CONFIG_RS5C313_RTC=y +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=m + +# +# Video For Linux +# + +# +# Video Adapters +# +# CONFIG_VIDEO_PMS is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_STRADIS is not set +# CONFIG_VIDEO_MXB is not set +# CONFIG_VIDEO_DPC is not set +# CONFIG_VIDEO_HEXIUM_ORION is not set +# CONFIG_VIDEO_HEXIUM_GEMINI is not set + +# +# Radio Adapters +# +# CONFIG_RADIO_CADET is not set +# CONFIG_RADIO_RTRACK is not set +# CONFIG_RADIO_RTRACK2 is not set +# CONFIG_RADIO_AZTECH is not set +# CONFIG_RADIO_GEMTEK is not set +# CONFIG_RADIO_GEMTEK_PCI is not set +# CONFIG_RADIO_MAXIRADIO is not set +# CONFIG_RADIO_MAESTRO is not set +# CONFIG_RADIO_SF16FMI is not set +# CONFIG_RADIO_SF16FMR2 is not set +# CONFIG_RADIO_TERRATEC is not set +# CONFIG_RADIO_TRUST is not set +# CONFIG_RADIO_TYPHOON is not set +# CONFIG_RADIO_ZOLTRIX is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_MDA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FONT_8x16=y + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +# CONFIG_SND is not set + +# +# Open Sound System +# +CONFIG_SOUND_PRIME=m +# CONFIG_SOUND_BT878 is not set +# CONFIG_SOUND_CMPCI is not set +# CONFIG_SOUND_EMU10K1 is not set +# CONFIG_SOUND_FUSION is not set +# CONFIG_SOUND_CS4281 is not set +# CONFIG_SOUND_ES1370 is not set +# CONFIG_SOUND_ES1371 is not set +# CONFIG_SOUND_ESSSOLO1 is not set +# CONFIG_SOUND_MAESTRO is not set +# CONFIG_SOUND_MAESTRO3 is not set +# CONFIG_SOUND_ICH is not set +# CONFIG_SOUND_SONICVIBES is not set +# CONFIG_SOUND_TRIDENT is not set +# CONFIG_SOUND_MSNDCLAS is not set +# CONFIG_SOUND_MSNDPIN is not set +# CONFIG_SOUND_VIA82CXXX is not set +# CONFIG_SOUND_ALI5455 is not set +# CONFIG_SOUND_FORTE is not set +# CONFIG_SOUND_RME96XX is not set +# CONFIG_SOUND_AD1980 is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +CONFIG_OBSOLETE_OSS_USB_DRIVER=y +CONFIG_USB_AUDIO=m +# CONFIG_USB_BLUETOOTH_TTY is not set +CONFIG_USB_MIDI=m +# CONFIG_USB_ACM is not set +CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_DATAFAB=y +CONFIG_USB_STORAGE_FREECOM=y +CONFIG_USB_STORAGE_ISD200=y +CONFIG_USB_STORAGE_DPCM=y +# CONFIG_USB_STORAGE_USBAT is not set +CONFIG_USB_STORAGE_SDDR09=y +CONFIG_USB_STORAGE_SDDR55=y +CONFIG_USB_STORAGE_JUMPSHOT=y + +# +# USB Input Devices +# +CONFIG_USB_HID=m +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +CONFIG_USB_DABUSB=m +CONFIG_USB_VICAM=m +CONFIG_USB_DSBR=m +CONFIG_USB_IBMCAM=m +CONFIG_USB_KONICAWC=m +CONFIG_USB_OV511=m +CONFIG_USB_SE401=m +CONFIG_USB_SN9C102=m +CONFIG_USB_STV680=m +CONFIG_USB_PWC=m + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +# CONFIG_USB_SERIAL_GENERIC is not set +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +CONFIG_USB_SERIAL_FTDI_SIO=m +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +CONFIG_USB_SISUSBVGA=m +CONFIG_USB_SISUSBVGA_CON=y +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +# CONFIG_REISERFS_FS_XATTR is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +CONFIG_ROMFS_FS=y +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +# CONFIG_JOLIET is not set +# CONFIG_ZISOFS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +CONFIG_UFS_FS=m +CONFIG_UFS_FS_WRITE=y + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +CONFIG_NLS_CODEPAGE_932=y +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_FRAME_POINTER is not set +CONFIG_SH_STANDARD_BIOS=y +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_EARLY_PRINTK is not set +# CONFIG_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index 182fe9092577..c503ca072e11 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -25,4 +25,4 @@ RTS7751R2D SH_RTS7751R2D EDOSK7705 SH_EDOSK7705 SH4202_MICRODEV SH_SH4202_MICRODEV SH03 SH_SH03 - +LANDISK SH_LANDISK |