diff options
Diffstat (limited to 'arch')
216 files changed, 3715 insertions, 1545 deletions
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 8ad5cc3e83e3..7fc11c34b696 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -25,13 +25,13 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/board-ams-delta.h> +#include <plat/board-ams-delta.h> #include <mach/gpio.h> -#include <mach/keypad.h> -#include <mach/mux.h> -#include <mach/usb.h> -#include <mach/board.h> -#include <mach/common.h> +#include <plat/keypad.h> +#include <plat/mux.h> +#include <plat/usb.h> +#include <plat/board.h> +#include <plat/common.h> static u8 ams_delta_latch1_reg; static u16 ams_delta_latch2_reg; diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index a7ead1b93226..f4b72c1654f5 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -26,14 +26,14 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <mach/tc.h> +#include <plat/tc.h> #include <mach/gpio.h> -#include <mach/mux.h> -#include <mach/fpga.h> -#include <mach/nand.h> -#include <mach/keypad.h> -#include <mach/common.h> -#include <mach/board.h> +#include <plat/mux.h> +#include <plat/fpga.h> +#include <plat/nand.h> +#include <plat/keypad.h> +#include <plat/common.h> +#include <plat/board.h> /* fsample is pretty close to p2-sample */ @@ -107,7 +107,7 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = INT_730_MPU_EXT_NIRQ, + .start = INT_7XX_MPU_EXT_NIRQ, .end = 0, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, @@ -196,8 +196,8 @@ static struct platform_device smc91x_device = { static struct resource kp_resources[] = { [0] = { - .start = INT_730_MPUIO_KEYPAD, - .end = INT_730_MPUIO_KEYPAD, + .start = INT_7XX_MPUIO_KEYPAD, + .end = INT_7XX_MPUIO_KEYPAD, .flags = IORESOURCE_IRQ, }, }; @@ -309,7 +309,7 @@ static void __init omap_fsample_map_io(void) /* * Hold GSM Reset until needed */ - omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL); + omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); /* * UARTs -> done automagically by 8250 driver @@ -320,21 +320,21 @@ static void __init omap_fsample_map_io(void) */ /* Flash: CS0 timings setup */ - omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0); - omap_writel(0x00000088, OMAP730_FLASH_ACFG_0); + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); + omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); /* * Ethernet support through the debug board * CS1 timings setup */ - omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1); - omap_writel(0x00000000, OMAP730_FLASH_ACFG_1); + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); + omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); /* * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, * It is used as the Ethernet controller interrupt */ - omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9); + omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9); } MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index 6c8a41f20e51..e1195a3467b8 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -23,10 +23,10 @@ #include <asm/mach/map.h> #include <mach/gpio.h> -#include <mach/mux.h> -#include <mach/usb.h> -#include <mach/board.h> -#include <mach/common.h> +#include <plat/mux.h> +#include <plat/usb.h> +#include <plat/board.h> +#include <plat/common.h> static void __init omap_generic_init_irq(void) { diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c index 46098f546824..b30c4990744d 100644 --- a/arch/arm/mach-omap1/board-h2-mmc.c +++ b/arch/arm/mach-omap1/board-h2-mmc.c @@ -16,7 +16,7 @@ #include <linux/i2c/tps65010.h> -#include <mach/mmc.h> +#include <plat/mmc.h> #include <mach/gpio.h> #include "board-h2.h" diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index aab860307dca..89ba8ec4bbf4 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -37,14 +37,14 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <mach/mux.h> -#include <mach/dma.h> -#include <mach/tc.h> -#include <mach/nand.h> -#include <mach/irda.h> -#include <mach/usb.h> -#include <mach/keypad.h> -#include <mach/common.h> +#include <plat/mux.h> +#include <plat/dma.h> +#include <plat/tc.h> +#include <plat/nand.h> +#include <plat/irda.h> +#include <plat/usb.h> +#include <plat/keypad.h> +#include <plat/common.h> #include "board-h2.h" diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c index 5e8877ce35e0..54b0f063e263 100644 --- a/arch/arm/mach-omap1/board-h3-mmc.c +++ b/arch/arm/mach-omap1/board-h3-mmc.c @@ -16,7 +16,7 @@ #include <linux/i2c/tps65010.h> -#include <mach/mmc.h> +#include <plat/mmc.h> #include <mach/gpio.h> #include "board-h3.h" diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 89586b80b8d5..f5cc0a730524 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -40,13 +40,13 @@ #include <asm/mach/map.h> #include <mach/irqs.h> -#include <mach/mux.h> -#include <mach/tc.h> -#include <mach/nand.h> -#include <mach/usb.h> -#include <mach/keypad.h> -#include <mach/dma.h> -#include <mach/common.h> +#include <plat/mux.h> +#include <plat/tc.h> +#include <plat/nand.h> +#include <plat/usb.h> +#include <plat/keypad.h> +#include <plat/dma.h> +#include <plat/common.h> #include "board-h3.h" diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index cd6c39514826..cf0fdb9c182f 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -30,14 +30,14 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <mach/mux.h> -#include <mach/fpga.h> +#include <plat/mux.h> +#include <plat/fpga.h> #include <mach/gpio.h> -#include <mach/tc.h> -#include <mach/usb.h> -#include <mach/keypad.h> -#include <mach/common.h> -#include <mach/mmc.h> +#include <plat/tc.h> +#include <plat/usb.h> +#include <plat/keypad.h> +#include <plat/common.h> +#include <plat/mmc.h> /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ #define INNOVATOR1610_ETHR_START 0x04000300 diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index ed2a48a9ce74..5a275bab2dfe 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -26,17 +26,17 @@ #include <asm/mach/map.h> #include <mach/gpio.h> -#include <mach/mux.h> -#include <mach/usb.h> -#include <mach/board.h> -#include <mach/keypad.h> -#include <mach/common.h> -#include <mach/dsp_common.h> -#include <mach/omapfb.h> -#include <mach/hwa742.h> -#include <mach/lcd_mipid.h> -#include <mach/mmc.h> -#include <mach/clock.h> +#include <plat/mux.h> +#include <plat/usb.h> +#include <plat/board.h> +#include <plat/keypad.h> +#include <plat/common.h> +#include <plat/dsp_common.h> +#include <plat/omapfb.h> +#include <plat/hwa742.h> +#include <plat/lcd_mipid.h> +#include <plat/mmc.h> +#include <plat/clock.h> #define ADS7846_PENDOWN_GPIO 15 diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index ed891b8a6b15..50c92c13e48a 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -47,10 +47,10 @@ #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <mach/usb.h> -#include <mach/mux.h> -#include <mach/tc.h> -#include <mach/common.h> +#include <plat/usb.h> +#include <plat/mux.h> +#include <plat/tc.h> +#include <plat/common.h> /* At OMAP5912 OSK the Ethernet is directly connected to CS1 */ #define OMAP_OSK_ETHR_START 0x04800300 @@ -312,7 +312,7 @@ static struct omap_board_config_kernel osk_config[] __initdata = { #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> -#include <mach/keypad.h> +#include <plat/keypad.h> static struct at24_platform_data at24c04 = { .byte_len = SZ_4K / 8, diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 4de258420f39..9fe887262bdf 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -34,14 +34,14 @@ #include <asm/mach/flash.h> #include <mach/gpio.h> -#include <mach/mux.h> -#include <mach/usb.h> -#include <mach/tc.h> -#include <mach/dma.h> -#include <mach/board.h> -#include <mach/irda.h> -#include <mach/keypad.h> -#include <mach/common.h> +#include <plat/mux.h> +#include <plat/usb.h> +#include <plat/tc.h> +#include <plat/dma.h> +#include <plat/board.h> +#include <plat/irda.h> +#include <plat/keypad.h> +#include <plat/common.h> #define PALMTE_USBDETECT_GPIO 0 #define PALMTE_USB_OR_DC_GPIO 1 diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index d972cf941b76..af068e3e0fe7 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -29,16 +29,16 @@ #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <mach/led.h> +#include <plat/led.h> #include <mach/gpio.h> -#include <mach/mux.h> -#include <mach/usb.h> -#include <mach/dma.h> -#include <mach/tc.h> -#include <mach/board.h> -#include <mach/irda.h> -#include <mach/keypad.h> -#include <mach/common.h> +#include <plat/mux.h> +#include <plat/usb.h> +#include <plat/dma.h> +#include <plat/tc.h> +#include <plat/board.h> +#include <plat/irda.h> +#include <plat/keypad.h> +#include <plat/common.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 986bd4df0e97..c7a3b6f36500 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -33,15 +33,15 @@ #include <asm/mach/flash.h> #include <mach/gpio.h> -#include <mach/mux.h> -#include <mach/usb.h> -#include <mach/dma.h> -#include <mach/tc.h> -#include <mach/board.h> -#include <mach/irda.h> -#include <mach/keypad.h> -#include <mach/common.h> -#include <mach/omap-alsa.h> +#include <plat/mux.h> +#include <plat/usb.h> +#include <plat/dma.h> +#include <plat/tc.h> +#include <plat/board.h> +#include <plat/irda.h> +#include <plat/keypad.h> +#include <plat/common.h> +#include <plat/omap-alsa.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 83406699f310..ca7df1e93efc 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -26,14 +26,14 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <mach/tc.h> +#include <plat/tc.h> #include <mach/gpio.h> -#include <mach/mux.h> -#include <mach/fpga.h> -#include <mach/nand.h> -#include <mach/keypad.h> -#include <mach/common.h> -#include <mach/board.h> +#include <plat/mux.h> +#include <plat/fpga.h> +#include <plat/nand.h> +#include <plat/keypad.h> +#include <plat/common.h> +#include <plat/board.h> static int p2_keymap[] = { KEY(0,0,KEY_UP), @@ -74,7 +74,7 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = INT_730_MPU_EXT_NIRQ, + .start = INT_7XX_MPU_EXT_NIRQ, .end = 0, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, @@ -163,8 +163,8 @@ static struct platform_device smc91x_device = { static struct resource kp_resources[] = { [0] = { - .start = INT_730_MPUIO_KEYPAD, - .end = INT_730_MPUIO_KEYPAD, + .start = INT_7XX_MPUIO_KEYPAD, + .end = INT_7XX_MPUIO_KEYPAD, .flags = IORESOURCE_IRQ, }, }; @@ -270,7 +270,7 @@ static void __init omap_perseus2_map_io(void) /* * Hold GSM Reset until needed */ - omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL); + omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); /* * UARTs -> done automagically by 8250 driver @@ -281,21 +281,21 @@ static void __init omap_perseus2_map_io(void) */ /* Flash: CS0 timings setup */ - omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0); - omap_writel(0x00000088, OMAP730_FLASH_ACFG_0); + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); + omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); /* * Ethernet support through the debug board * CS1 timings setup */ - omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1); - omap_writel(0x00000000, OMAP730_FLASH_ACFG_1); + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); + omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); /* * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, * It is used as the Ethernet controller interrupt */ - omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9); + omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9); } MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c index 58a46e4e45c3..5b33ae8141bc 100644 --- a/arch/arm/mach-omap1/board-sx1-mmc.c +++ b/arch/arm/mach-omap1/board-sx1-mmc.c @@ -15,9 +15,9 @@ #include <linux/platform_device.h> #include <mach/hardware.h> -#include <mach/mmc.h> +#include <plat/mmc.h> #include <mach/gpio.h> -#include <mach/board-sx1.h> +#include <plat/board-sx1.h> #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 056ae64e0f55..7a97fac83d8d 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -33,15 +33,15 @@ #include <asm/mach/map.h> #include <mach/gpio.h> -#include <mach/mux.h> -#include <mach/dma.h> -#include <mach/irda.h> -#include <mach/usb.h> -#include <mach/tc.h> -#include <mach/board.h> -#include <mach/common.h> -#include <mach/keypad.h> -#include <mach/board-sx1.h> +#include <plat/mux.h> +#include <plat/dma.h> +#include <plat/irda.h> +#include <plat/usb.h> +#include <plat/tc.h> +#include <plat/board.h> +#include <plat/common.h> +#include <plat/keypad.h> +#include <plat/board-sx1.h> /* Write to I2C device */ int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value) diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 07b07522d5bf..35c75c1bd0aa 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -29,11 +29,11 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <mach/common.h> +#include <plat/common.h> #include <mach/gpio.h> -#include <mach/mux.h> -#include <mach/tc.h> -#include <mach/usb.h> +#include <plat/mux.h> +#include <plat/tc.h> +#include <plat/usb.h> static struct plat_serial8250_port voiceblue_ports[] = { { diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 436eed22801b..b4fec9a6e89e 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -22,10 +22,10 @@ #include <asm/mach-types.h> #include <asm/clkdev.h> -#include <mach/cpu.h> -#include <mach/usb.h> -#include <mach/clock.h> -#include <mach/sram.h> +#include <plat/cpu.h> +#include <plat/usb.h> +#include <plat/clock.h> +#include <plat/sram.h> static const struct clkops clkops_generic; static const struct clkops clkops_uart; @@ -69,13 +69,13 @@ struct omap_clk { } #define CK_310 (1 << 0) -#define CK_730 (1 << 1) +#define CK_7XX (1 << 1) #define CK_1510 (1 << 2) #define CK_16XX (1 << 3) static struct omap_clk omap_clks[] = { /* non-ULPD clocks */ - CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310 | CK_7XX), CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310), /* CK_GEN1 clocks */ CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX), @@ -83,7 +83,7 @@ static struct omap_clk omap_clks[] = { CLK(NULL, "arm_ck", &arm_ck, CK_16XX | CK_1510 | CK_310), CLK(NULL, "armper_ck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), CLK(NULL, "arm_gpio_ck", &arm_gpio_ck, CK_1510 | CK_310), - CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310), CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310), CLK("omap_wdt", "ick", &armper_ck.clk, CK_16XX), @@ -97,7 +97,7 @@ static struct omap_clk omap_clks[] = { CLK(NULL, "dspxor_ck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), CLK(NULL, "dsptim_ck", &dsptim_ck, CK_16XX | CK_1510 | CK_310), /* CK_GEN3 clocks */ - CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_730), + CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), CLK(NULL, "tipb_ck", &tipb_ck, CK_1510 | CK_310), CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck, CK_16XX), CLK(NULL, "tc1_ck", &tc1_ck, CK_16XX), @@ -108,7 +108,7 @@ static struct omap_clk omap_clks[] = { CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310), CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX), CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX), - CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_730), + CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_7XX), CLK(NULL, "lcd_ck", &lcd_ck_1510.clk, CK_1510 | CK_310), /* ULPD clocks */ CLK(NULL, "uart1_ck", &uart1_1510, CK_1510 | CK_310), @@ -398,7 +398,7 @@ static int omap1_select_table_rate(struct clk * clk, unsigned long rate) * Reprogramming the DPLL is tricky, it must be done from SRAM. * (on 730, bit 13 must always be 1) */ - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val | 0x2000); else omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); @@ -783,8 +783,8 @@ int __init omap1_clk_init(void) cpu_mask |= CK_16XX; if (cpu_is_omap1510()) cpu_mask |= CK_1510; - if (cpu_is_omap730()) - cpu_mask |= CK_730; + if (cpu_is_omap7xx()) + cpu_mask |= CK_7XX; if (cpu_is_omap310()) cpu_mask |= CK_310; @@ -800,7 +800,7 @@ int __init omap1_clk_init(void) crystal_type = info->system_clock_type; } -#if defined(CONFIG_ARCH_OMAP730) +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) ck_ref.rate = 13000000; #elif defined(CONFIG_ARCH_OMAP16XX) if (crystal_type == 2) @@ -847,7 +847,7 @@ int __init omap1_clk_init(void) printk(KERN_ERR "System frequencies not set. Check your config.\n"); /* Guess sane values (60MHz) */ omap_writew(0x2290, DPLL_CTL); - omap_writew(cpu_is_omap730() ? 0x3005 : 0x1005, ARM_CKCTL); + omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL); ck_dpll1.rate = 60000000; } #endif @@ -862,7 +862,7 @@ int __init omap1_clk_init(void) #if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE) /* Select slicer output as OMAP input clock */ - omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL); + omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, OMAP7XX_PCC_UPLD_CTRL); #endif /* Amstrad Delta wants BCLK high when inactive */ @@ -873,7 +873,7 @@ int __init omap1_clk_init(void) /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */ /* (on 730, bit 13 must not be cleared) */ - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL); else omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL); diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 06808434ea04..6d2f72dcbb04 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -18,11 +18,11 @@ #include <mach/hardware.h> #include <asm/mach/map.h> -#include <mach/tc.h> -#include <mach/board.h> -#include <mach/mux.h> +#include <plat/tc.h> +#include <plat/board.h> +#include <plat/mux.h> #include <mach/gpio.h> -#include <mach/mmc.h> +#include <plat/mmc.h> /*-------------------------------------------------------------------------*/ diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index 4f2b8a7adb19..5cfce1636da0 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -27,7 +27,7 @@ #include <asm/irq.h> #include <asm/mach/irq.h> -#include <mach/fpga.h> +#include <plat/fpga.h> #include <mach/gpio.h> static void fpga_mask_irq(unsigned int irq) diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c index e5dcdf764c91..a0e3560b39db 100644 --- a/arch/arm/mach-omap1/id.c +++ b/arch/arm/mach-omap1/id.c @@ -15,7 +15,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> -#include <mach/cpu.h> +#include <plat/cpu.h> #define OMAP_DIE_ID_0 0xfffe1800 #define OMAP_DIE_ID_1 0xfffe1804 diff --git a/arch/arm/mach-omap1/include/mach/clkdev.h b/arch/arm/mach-omap1/include/mach/clkdev.h new file mode 100644 index 000000000000..ea8640e4603e --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/clkdev.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap1/include/mach/clkdev.h + */ + +#include <plat/clkdev.h> diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S new file mode 100644 index 000000000000..aedb746fc33c --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/debug-macro.S @@ -0,0 +1,45 @@ +/* arch/arm/mach-omap1/include/mach/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + moveq \rx, #0xff000000 @ physical base address + movne \rx, #0xfe000000 @ virtual base + orr \rx, \rx, #0x00fb0000 +#ifdef CONFIG_OMAP_LL_DEBUG_UART3 + orr \rx, \rx, #0x00009000 @ UART 3 +#endif +#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3) + orr \rx, \rx, #0x00000800 @ UART 2 & 3 +#endif + .endm + + .macro senduart,rd,rx + strb \rd, [\rx] + .endm + + .macro busyuart,rd,rx +1001: ldrb \rd, [\rx, #(0x5 << 2)] @ OMAP-1510 and friends + and \rd, \rd, #0x60 + teq \rd, #0x60 + beq 1002f + ldrb \rd, [\rx, #(0x5 << 0)] @ OMAP-730 only + and \rd, \rd, #0x60 + teq \rd, #0x60 + bne 1001b +1002: + .endm + + .macro waituart,rd,rx + .endm diff --git a/arch/arm/mach-omap1/include/mach/entry-macro.S b/arch/arm/mach-omap1/include/mach/entry-macro.S new file mode 100644 index 000000000000..df9060edda28 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/entry-macro.S @@ -0,0 +1,58 @@ +/* + * arch/arm/mach-omap1/include/mach/entry-macro.S + * + * Low-level IRQ helper macros for OMAP-based platforms + * + * Copyright (C) 2009 Texas Instruments + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <mach/hardware.h> +#include <mach/io.h> +#include <mach/irqs.h> +#include <asm/hardware/gic.h> + +#if (defined(CONFIG_ARCH_OMAP730)||defined(CONFIG_ARCH_OMAP850)) && \ + (defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)) +#error "FIXME: OMAP7XX doesn't support multiple-OMAP" +#elif defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) +#define INT_IH2_IRQ INT_7XX_IH2_IRQ +#elif defined(CONFIG_ARCH_OMAP15XX) +#define INT_IH2_IRQ INT_1510_IH2_IRQ +#elif defined(CONFIG_ARCH_OMAP16XX) +#define INT_IH2_IRQ INT_1610_IH2_IRQ +#else +#warning "IH2 IRQ defaulted" +#define INT_IH2_IRQ INT_1510_IH2_IRQ +#endif + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE) + ldr \irqnr, [\base, #IRQ_ITR_REG_OFFSET] + ldr \tmp, [\base, #IRQ_MIR_REG_OFFSET] + mov \irqstat, #0xffffffff + bic \tmp, \irqstat, \tmp + tst \irqnr, \tmp + beq 1510f + + ldr \irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET] + cmp \irqnr, #0 + ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET] + cmpeq \irqnr, #INT_IH2_IRQ + ldreq \base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE) + ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET] + addeqs \irqnr, \irqnr, #32 +1510: + .endm + diff --git a/arch/arm/mach-omap1/include/mach/gpio.h b/arch/arm/mach-omap1/include/mach/gpio.h new file mode 100644 index 000000000000..e737706a8fe1 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/gpio.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap1/include/mach/gpio.h + */ + +#include <plat/gpio.h> diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h new file mode 100644 index 000000000000..a3f6287b2007 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/hardware.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap1/include/mach/hardware.h + */ + +#include <plat/hardware.h> diff --git a/arch/arm/mach-omap1/include/mach/io.h b/arch/arm/mach-omap1/include/mach/io.h new file mode 100644 index 000000000000..57bdf74a3e64 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/io.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap1/include/mach/io.h + */ + +#include <plat/io.h> diff --git a/arch/arm/mach-omap1/include/mach/irqs.h b/arch/arm/mach-omap1/include/mach/irqs.h new file mode 100644 index 000000000000..9292fdc1cb0b --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/irqs.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap1/include/mach/irqs.h + */ + +#include <plat/irqs.h> diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h new file mode 100644 index 000000000000..e9b600c113ef --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/memory.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap1/include/mach/memory.h + */ + +#include <plat/memory.h> diff --git a/arch/arm/plat-omap/include/mach/mtd-xip.h b/arch/arm/mach-omap1/include/mach/mtd-xip.h index f82a8dcaad94..f82a8dcaad94 100644 --- a/arch/arm/plat-omap/include/mach/mtd-xip.h +++ b/arch/arm/mach-omap1/include/mach/mtd-xip.h diff --git a/arch/arm/mach-omap1/include/mach/smp.h b/arch/arm/mach-omap1/include/mach/smp.h new file mode 100644 index 000000000000..80a371c06e59 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/smp.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap1/include/mach/smp.h + */ + +#include <plat/smp.h> diff --git a/arch/arm/mach-omap1/include/mach/system.h b/arch/arm/mach-omap1/include/mach/system.h new file mode 100644 index 000000000000..a6c1b3a16dfc --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/system.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap1/include/mach/system.h + */ + +#include <plat/system.h> diff --git a/arch/arm/mach-omap1/include/mach/timex.h b/arch/arm/mach-omap1/include/mach/timex.h new file mode 100644 index 000000000000..4793790d53cc --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/timex.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap1/include/mach/timex.h + */ + +#include <plat/timex.h> diff --git a/arch/arm/mach-omap1/include/mach/uncompress.h b/arch/arm/mach-omap1/include/mach/uncompress.h new file mode 100644 index 000000000000..0ff22dc075c7 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/uncompress.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap1/include/mach/uncompress.h + */ + +#include <plat/uncompress.h> diff --git a/arch/arm/mach-omap1/include/mach/vmalloc.h b/arch/arm/mach-omap1/include/mach/vmalloc.h new file mode 100644 index 000000000000..1b2af14df151 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/vmalloc.h @@ -0,0 +1,20 @@ +/* + * arch/arm/mach-omap1/include/mach/vmalloc.h + * + * Copyright (C) 2000 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define VMALLOC_END (PAGE_OFFSET + 0x18000000) diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 7030f9281ea1..2a6d68aa3489 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -15,8 +15,8 @@ #include <asm/tlb.h> #include <asm/mach/map.h> -#include <mach/mux.h> -#include <mach/tc.h> +#include <plat/mux.h> +#include <plat/tc.h> extern int omap1_clk_init(void); extern void omap_check_revision(void); @@ -36,33 +36,17 @@ static struct map_desc omap_io_desc[] __initdata = { } }; -#ifdef CONFIG_ARCH_OMAP730 -static struct map_desc omap730_io_desc[] __initdata = { +#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) +static struct map_desc omap7xx_io_desc[] __initdata = { { - .virtual = OMAP730_DSP_BASE, - .pfn = __phys_to_pfn(OMAP730_DSP_START), - .length = OMAP730_DSP_SIZE, + .virtual = OMAP7XX_DSP_BASE, + .pfn = __phys_to_pfn(OMAP7XX_DSP_START), + .length = OMAP7XX_DSP_SIZE, .type = MT_DEVICE }, { - .virtual = OMAP730_DSPREG_BASE, - .pfn = __phys_to_pfn(OMAP730_DSPREG_START), - .length = OMAP730_DSPREG_SIZE, - .type = MT_DEVICE - } -}; -#endif - -#ifdef CONFIG_ARCH_OMAP850 -static struct map_desc omap850_io_desc[] __initdata = { - { - .virtual = OMAP850_DSP_BASE, - .pfn = __phys_to_pfn(OMAP850_DSP_START), - .length = OMAP850_DSP_SIZE, - .type = MT_DEVICE - }, { - .virtual = OMAP850_DSPREG_BASE, - .pfn = __phys_to_pfn(OMAP850_DSPREG_START), - .length = OMAP850_DSPREG_SIZE, + .virtual = OMAP7XX_DSPREG_BASE, + .pfn = __phys_to_pfn(OMAP7XX_DSPREG_START), + .length = OMAP7XX_DSPREG_SIZE, .type = MT_DEVICE } }; @@ -120,18 +104,11 @@ void __init omap1_map_common_io(void) */ omap_check_revision(); -#ifdef CONFIG_ARCH_OMAP730 - if (cpu_is_omap730()) { - iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc)); - } -#endif - -#ifdef CONFIG_ARCH_OMAP850 - if (cpu_is_omap850()) { - iotable_init(omap850_io_desc, ARRAY_SIZE(omap850_io_desc)); +#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) + if (cpu_is_omap7xx()) { + iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc)); } #endif - #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap15xx()) { iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc)); diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index de03c8448994..db913c34d1fe 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -46,7 +46,7 @@ #include <asm/irq.h> #include <asm/mach/irq.h> #include <mach/gpio.h> -#include <mach/cpu.h> +#include <plat/cpu.h> #define IRQ_BANK(irq) ((irq) >> 5) #define IRQ_BIT(irq) ((irq) & 0x1f) @@ -137,16 +137,8 @@ static void omap_irq_set_cfg(int irq, int fiq, int priority, int trigger) irq_bank_writel(val, bank, offset); } -#ifdef CONFIG_ARCH_OMAP730 -static struct omap_irq_bank omap730_irq_banks[] = { - { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f }, - { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 }, - { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0x800040f3 }, -}; -#endif - -#ifdef CONFIG_ARCH_OMAP850 -static struct omap_irq_bank omap850_irq_banks[] = { +#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) +static struct omap_irq_bank omap7xx_irq_banks[] = { { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f }, { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 }, { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0x800040f3 }, @@ -186,16 +178,10 @@ void __init omap_init_irq(void) { int i, j; -#ifdef CONFIG_ARCH_OMAP730 - if (cpu_is_omap730()) { - irq_banks = omap730_irq_banks; - irq_bank_count = ARRAY_SIZE(omap730_irq_banks); - } -#endif -#ifdef CONFIG_ARCH_OMAP850 - if (cpu_is_omap850()) { - irq_banks = omap850_irq_banks; - irq_bank_count = ARRAY_SIZE(omap850_irq_banks); +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + if (cpu_is_omap7xx()) { + irq_banks = omap7xx_irq_banks; + irq_bank_count = ARRAY_SIZE(omap7xx_irq_banks); } #endif #ifdef CONFIG_ARCH_OMAP15XX @@ -247,10 +233,8 @@ void __init omap_init_irq(void) /* Unmask level 2 handler */ - if (cpu_is_omap730()) - omap_unmask_irq(INT_730_IH2_IRQ); - else if (cpu_is_omap850()) - omap_unmask_irq(INT_850_IH2_IRQ); + if (cpu_is_omap7xx()) + omap_unmask_irq(INT_7XX_IH2_IRQ); else if (cpu_is_omap15xx()) omap_unmask_irq(INT_1510_IH2_IRQ); else if (cpu_is_omap16xx()) diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c index 17c9d0e04216..b4f9be52e1e8 100644 --- a/arch/arm/mach-omap1/leds-h2p2-debug.c +++ b/arch/arm/mach-omap1/leds-h2p2-debug.c @@ -19,7 +19,7 @@ #include <asm/system.h> #include <asm/mach-types.h> -#include <mach/fpga.h> +#include <plat/fpga.h> #include <mach/gpio.h> #include "leds.h" diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c index 8cbf2562dcaa..277f356d4cd0 100644 --- a/arch/arm/mach-omap1/leds.c +++ b/arch/arm/mach-omap1/leds.c @@ -10,7 +10,7 @@ #include <asm/mach-types.h> #include <mach/gpio.h> -#include <mach/mux.h> +#include <plat/mux.h> #include "leds.h" diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c index 6810b4aeb02c..caf889aaa248 100644 --- a/arch/arm/mach-omap1/mailbox.c +++ b/arch/arm/mach-omap1/mailbox.c @@ -14,7 +14,7 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/io.h> -#include <mach/mailbox.h> +#include <plat/mailbox.h> #include <mach/irqs.h> #define MAILBOX_ARM2DSP1 0x00 diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index 505d98cfe508..6bddce104ee9 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -18,11 +18,11 @@ #include <linux/platform_device.h> #include <mach/irqs.h> -#include <mach/dma.h> -#include <mach/mux.h> -#include <mach/cpu.h> -#include <mach/mcbsp.h> -#include <mach/dsp_common.h> +#include <plat/dma.h> +#include <plat/mux.h> +#include <plat/cpu.h> +#include <plat/mcbsp.h> +#include <plat/dsp_common.h> #define DPS_RSTCT2_PER_EN (1 << 0) #define DSP_RSTCT2_WD_PER_EN (1 << 1) @@ -79,29 +79,29 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = { .free = omap1_mcbsp_free, }; -#ifdef CONFIG_ARCH_OMAP730 -static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = { +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) +static struct omap_mcbsp_platform_data omap7xx_mcbsp_pdata[] = { { - .phys_base = OMAP730_MCBSP1_BASE, + .phys_base = OMAP7XX_MCBSP1_BASE, .dma_rx_sync = OMAP_DMA_MCBSP1_RX, .dma_tx_sync = OMAP_DMA_MCBSP1_TX, - .rx_irq = INT_730_McBSP1RX, - .tx_irq = INT_730_McBSP1TX, + .rx_irq = INT_7XX_McBSP1RX, + .tx_irq = INT_7XX_McBSP1TX, .ops = &omap1_mcbsp_ops, }, { - .phys_base = OMAP730_MCBSP2_BASE, + .phys_base = OMAP7XX_MCBSP2_BASE, .dma_rx_sync = OMAP_DMA_MCBSP3_RX, .dma_tx_sync = OMAP_DMA_MCBSP3_TX, - .rx_irq = INT_730_McBSP2RX, - .tx_irq = INT_730_McBSP2TX, + .rx_irq = INT_7XX_McBSP2RX, + .tx_irq = INT_7XX_McBSP2TX, .ops = &omap1_mcbsp_ops, }, }; -#define OMAP730_MCBSP_PDATA_SZ ARRAY_SIZE(omap730_mcbsp_pdata) +#define OMAP7XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap7xx_mcbsp_pdata) #else -#define omap730_mcbsp_pdata NULL -#define OMAP730_MCBSP_PDATA_SZ 0 +#define omap7xx_mcbsp_pdata NULL +#define OMAP7XX_MCBSP_PDATA_SZ 0 #endif #ifdef CONFIG_ARCH_OMAP15XX @@ -172,8 +172,8 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { int __init omap1_mcbsp_init(void) { - if (cpu_is_omap730()) - omap_mcbsp_count = OMAP730_MCBSP_PDATA_SZ; + if (cpu_is_omap7xx()) + omap_mcbsp_count = OMAP7XX_MCBSP_PDATA_SZ; if (cpu_is_omap15xx()) omap_mcbsp_count = OMAP15XX_MCBSP_PDATA_SZ; if (cpu_is_omap16xx()) @@ -184,9 +184,9 @@ int __init omap1_mcbsp_init(void) if (!mcbsp_ptr) return -ENOMEM; - if (cpu_is_omap730()) - omap_mcbsp_register_board_cfg(omap730_mcbsp_pdata, - OMAP730_MCBSP_PDATA_SZ); + if (cpu_is_omap7xx()) + omap_mcbsp_register_board_cfg(omap7xx_mcbsp_pdata, + OMAP7XX_MCBSP_PDATA_SZ); if (cpu_is_omap15xx()) omap_mcbsp_register_board_cfg(omap15xx_mcbsp_pdata, diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 721e0d9d8b1d..1e6145c9ee93 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -29,53 +29,34 @@ #include <asm/system.h> -#include <mach/mux.h> +#include <plat/mux.h> #ifdef CONFIG_OMAP_MUX static struct omap_mux_cfg arch_mux_cfg; -#ifdef CONFIG_ARCH_OMAP730 -static struct pin_config __initdata_or_module omap730_pins[] = { -MUX_CFG_730("E2_730_KBR0", 12, 21, 0, 20, 1, 0) -MUX_CFG_730("J7_730_KBR1", 12, 25, 0, 24, 1, 0) -MUX_CFG_730("E1_730_KBR2", 12, 29, 0, 28, 1, 0) -MUX_CFG_730("F3_730_KBR3", 13, 1, 0, 0, 1, 0) -MUX_CFG_730("D2_730_KBR4", 13, 5, 0, 4, 1, 0) -MUX_CFG_730("C2_730_KBC0", 13, 9, 0, 8, 1, 0) -MUX_CFG_730("D3_730_KBC1", 13, 13, 0, 12, 1, 0) -MUX_CFG_730("E4_730_KBC2", 13, 17, 0, 16, 1, 0) -MUX_CFG_730("F4_730_KBC3", 13, 21, 0, 20, 1, 0) -MUX_CFG_730("E3_730_KBC4", 13, 25, 0, 24, 1, 0) - -MUX_CFG_730("AA17_730_USB_DM", 2, 21, 0, 20, 0, 0) -MUX_CFG_730("W16_730_USB_PU_EN", 2, 25, 0, 24, 0, 0) -MUX_CFG_730("W17_730_USB_VBUSI", 2, 29, 0, 28, 0, 0) +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) +static struct pin_config __initdata_or_module omap7xx_pins[] = { +MUX_CFG_7XX("E2_7XX_KBR0", 12, 21, 0, 20, 1, 0) +MUX_CFG_7XX("J7_7XX_KBR1", 12, 25, 0, 24, 1, 0) +MUX_CFG_7XX("E1_7XX_KBR2", 12, 29, 0, 28, 1, 0) +MUX_CFG_7XX("F3_7XX_KBR3", 13, 1, 0, 0, 1, 0) +MUX_CFG_7XX("D2_7XX_KBR4", 13, 5, 0, 4, 1, 0) +MUX_CFG_7XX("C2_7XX_KBC0", 13, 9, 0, 8, 1, 0) +MUX_CFG_7XX("D3_7XX_KBC1", 13, 13, 0, 12, 1, 0) +MUX_CFG_7XX("E4_7XX_KBC2", 13, 17, 0, 16, 1, 0) +MUX_CFG_7XX("F4_7XX_KBC3", 13, 21, 0, 20, 1, 0) +MUX_CFG_7XX("E3_7XX_KBC4", 13, 25, 0, 24, 1, 0) + +MUX_CFG_7XX("AA17_7XX_USB_DM", 2, 21, 0, 20, 0, 0) +MUX_CFG_7XX("W16_7XX_USB_PU_EN", 2, 25, 0, 24, 0, 0) +MUX_CFG_7XX("W17_7XX_USB_VBUSI", 2, 29, 0, 28, 0, 0) }; -#define OMAP730_PINS_SZ ARRAY_SIZE(omap730_pins) +#define OMAP7XX_PINS_SZ ARRAY_SIZE(omap7xx_pins) #else -#define omap730_pins NULL -#define OMAP730_PINS_SZ 0 -#endif /* CONFIG_ARCH_OMAP730 */ - -#ifdef CONFIG_ARCH_OMAP850 -struct pin_config __initdata_or_module omap850_pins[] = { -MUX_CFG_850("E2_850_KBR0", 12, 21, 0, 20, 1, 0) -MUX_CFG_850("J7_850_KBR1", 12, 25, 0, 24, 1, 0) -MUX_CFG_850("E1_850_KBR2", 12, 29, 0, 28, 1, 0) -MUX_CFG_850("F3_850_KBR3", 13, 1, 0, 0, 1, 0) -MUX_CFG_850("D2_850_KBR4", 13, 5, 0, 4, 1, 0) -MUX_CFG_850("C2_850_KBC0", 13, 9, 0, 8, 1, 0) -MUX_CFG_850("D3_850_KBC1", 13, 13, 0, 12, 1, 0) -MUX_CFG_850("E4_850_KBC2", 13, 17, 0, 16, 1, 0) -MUX_CFG_850("F4_850_KBC3", 13, 21, 0, 20, 1, 0) -MUX_CFG_850("E3_850_KBC4", 13, 25, 0, 24, 1, 0) - -MUX_CFG_850("AA17_850_USB_DM", 2, 21, 0, 20, 0, 0) -MUX_CFG_850("W16_850_USB_PU_EN", 2, 25, 0, 24, 0, 0) -MUX_CFG_850("W17_850_USB_VBUSI", 2, 29, 0, 28, 0, 0) -}; -#endif +#define omap7xx_pins NULL +#define OMAP7XX_PINS_SZ 0 +#endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */ #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) static struct pin_config __initdata_or_module omap1xxx_pins[] = { @@ -438,11 +419,6 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg) printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n", cfg->pull_name, cfg->pull_reg, pull_orig, pull); } - -#ifdef CONFIG_ARCH_OMAP850 - omap_mux_register(omap850_pins, ARRAY_SIZE(omap850_pins)); -#endif - #endif #ifdef CONFIG_OMAP_MUX_ERRORS @@ -454,9 +430,9 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg) int __init omap1_mux_init(void) { - if (cpu_is_omap730()) { - arch_mux_cfg.pins = omap730_pins; - arch_mux_cfg.size = OMAP730_PINS_SZ; + if (cpu_is_omap7xx()) { + arch_mux_cfg.pins = omap7xx_pins; + arch_mux_cfg.size = OMAP7XX_PINS_SZ; arch_mux_cfg.cfg_reg = omap1_cfg_reg; } diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 5218943c91c0..b1d3f9fade23 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -48,21 +48,21 @@ #include <asm/mach/time.h> #include <asm/mach/irq.h> -#include <mach/cpu.h> +#include <plat/cpu.h> #include <mach/irqs.h> -#include <mach/clock.h> -#include <mach/sram.h> -#include <mach/tc.h> -#include <mach/mux.h> -#include <mach/dma.h> -#include <mach/dmtimer.h> +#include <plat/clock.h> +#include <plat/sram.h> +#include <plat/tc.h> +#include <plat/mux.h> +#include <plat/dma.h> +#include <plat/dmtimer.h> #include "pm.h" static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE]; static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE]; -static unsigned int mpui730_sleep_save[MPUI730_SLEEP_SAVE_SIZE]; +static unsigned int mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_SIZE]; static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE]; static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE]; @@ -183,9 +183,9 @@ static void omap_pm_wakeup_setup(void) * drivers must still separately call omap_set_gpio_wakeup() to * wake up to a GPIO interrupt. */ - if (cpu_is_omap730()) - level1_wake = OMAP_IRQ_BIT(INT_730_GPIO_BANK1) | - OMAP_IRQ_BIT(INT_730_IH2_IRQ); + if (cpu_is_omap7xx()) + level1_wake = OMAP_IRQ_BIT(INT_7XX_GPIO_BANK1) | + OMAP_IRQ_BIT(INT_7XX_IH2_IRQ); else if (cpu_is_omap15xx()) level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) | OMAP_IRQ_BIT(INT_1510_IH2_IRQ); @@ -195,10 +195,10 @@ static void omap_pm_wakeup_setup(void) omap_writel(~level1_wake, OMAP_IH1_MIR); - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { omap_writel(~level2_wake, OMAP_IH2_0_MIR); - omap_writel(~(OMAP_IRQ_BIT(INT_730_WAKE_UP_REQ) | - OMAP_IRQ_BIT(INT_730_MPUIO_KEYPAD)), + omap_writel(~(OMAP_IRQ_BIT(INT_7XX_WAKE_UP_REQ) | + OMAP_IRQ_BIT(INT_7XX_MPUIO_KEYPAD)), OMAP_IH2_1_MIR); } else if (cpu_is_omap15xx()) { level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD); @@ -253,15 +253,15 @@ void omap1_pm_suspend(void) * Save interrupt, MPUI, ARM and UPLD control registers. */ - if (cpu_is_omap730()) { - MPUI730_SAVE(OMAP_IH1_MIR); - MPUI730_SAVE(OMAP_IH2_0_MIR); - MPUI730_SAVE(OMAP_IH2_1_MIR); - MPUI730_SAVE(MPUI_CTRL); - MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG); - MPUI730_SAVE(MPUI_DSP_API_CONFIG); - MPUI730_SAVE(EMIFS_CONFIG); - MPUI730_SAVE(EMIFF_SDRAM_CONFIG); + if (cpu_is_omap7xx()) { + MPUI7XX_SAVE(OMAP_IH1_MIR); + MPUI7XX_SAVE(OMAP_IH2_0_MIR); + MPUI7XX_SAVE(OMAP_IH2_1_MIR); + MPUI7XX_SAVE(MPUI_CTRL); + MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG); + MPUI7XX_SAVE(MPUI_DSP_API_CONFIG); + MPUI7XX_SAVE(EMIFS_CONFIG); + MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG); } else if (cpu_is_omap15xx()) { MPUI1510_SAVE(OMAP_IH1_MIR); @@ -306,7 +306,7 @@ void omap1_pm_suspend(void) omap_writew(omap_readw(ARM_RSTCT1) & ~(1 << DSP_EN), ARM_RSTCT1); /* shut down dsp_ck */ - if (!cpu_is_omap730()) + if (!cpu_is_omap7xx()) omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL); /* temporarily enabling api_ck to access DSP registers */ @@ -383,12 +383,12 @@ void omap1_pm_suspend(void) ULPD_RESTORE(ULPD_CLOCK_CTRL); ULPD_RESTORE(ULPD_STATUS_REQ); - if (cpu_is_omap730()) { - MPUI730_RESTORE(EMIFS_CONFIG); - MPUI730_RESTORE(EMIFF_SDRAM_CONFIG); - MPUI730_RESTORE(OMAP_IH1_MIR); - MPUI730_RESTORE(OMAP_IH2_0_MIR); - MPUI730_RESTORE(OMAP_IH2_1_MIR); + if (cpu_is_omap7xx()) { + MPUI7XX_RESTORE(EMIFS_CONFIG); + MPUI7XX_RESTORE(EMIFF_SDRAM_CONFIG); + MPUI7XX_RESTORE(OMAP_IH1_MIR); + MPUI7XX_RESTORE(OMAP_IH2_0_MIR); + MPUI7XX_RESTORE(OMAP_IH2_1_MIR); } else if (cpu_is_omap15xx()) { MPUI1510_RESTORE(MPUI_CTRL); MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG); @@ -461,13 +461,13 @@ static int omap_pm_read_proc( ULPD_SAVE(ULPD_DPLL_CTRL); ULPD_SAVE(ULPD_POWER_CTRL); - if (cpu_is_omap730()) { - MPUI730_SAVE(MPUI_CTRL); - MPUI730_SAVE(MPUI_DSP_STATUS); - MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG); - MPUI730_SAVE(MPUI_DSP_API_CONFIG); - MPUI730_SAVE(EMIFF_SDRAM_CONFIG); - MPUI730_SAVE(EMIFS_CONFIG); + if (cpu_is_omap7xx()) { + MPUI7XX_SAVE(MPUI_CTRL); + MPUI7XX_SAVE(MPUI_DSP_STATUS); + MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG); + MPUI7XX_SAVE(MPUI_DSP_API_CONFIG); + MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG); + MPUI7XX_SAVE(EMIFS_CONFIG); } else if (cpu_is_omap15xx()) { MPUI1510_SAVE(MPUI_CTRL); MPUI1510_SAVE(MPUI_DSP_STATUS); @@ -517,20 +517,20 @@ static int omap_pm_read_proc( ULPD_SHOW(ULPD_STATUS_REQ), ULPD_SHOW(ULPD_POWER_CTRL)); - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { my_buffer_offset += sprintf(my_base + my_buffer_offset, - "MPUI730_CTRL_REG 0x%-8x \n" - "MPUI730_DSP_STATUS_REG: 0x%-8x \n" - "MPUI730_DSP_BOOT_CONFIG_REG: 0x%-8x \n" - "MPUI730_DSP_API_CONFIG_REG: 0x%-8x \n" - "MPUI730_SDRAM_CONFIG_REG: 0x%-8x \n" - "MPUI730_EMIFS_CONFIG_REG: 0x%-8x \n", - MPUI730_SHOW(MPUI_CTRL), - MPUI730_SHOW(MPUI_DSP_STATUS), - MPUI730_SHOW(MPUI_DSP_BOOT_CONFIG), - MPUI730_SHOW(MPUI_DSP_API_CONFIG), - MPUI730_SHOW(EMIFF_SDRAM_CONFIG), - MPUI730_SHOW(EMIFS_CONFIG)); + "MPUI7XX_CTRL_REG 0x%-8x \n" + "MPUI7XX_DSP_STATUS_REG: 0x%-8x \n" + "MPUI7XX_DSP_BOOT_CONFIG_REG: 0x%-8x \n" + "MPUI7XX_DSP_API_CONFIG_REG: 0x%-8x \n" + "MPUI7XX_SDRAM_CONFIG_REG: 0x%-8x \n" + "MPUI7XX_EMIFS_CONFIG_REG: 0x%-8x \n", + MPUI7XX_SHOW(MPUI_CTRL), + MPUI7XX_SHOW(MPUI_DSP_STATUS), + MPUI7XX_SHOW(MPUI_DSP_BOOT_CONFIG), + MPUI7XX_SHOW(MPUI_DSP_API_CONFIG), + MPUI7XX_SHOW(EMIFF_SDRAM_CONFIG), + MPUI7XX_SHOW(EMIFS_CONFIG)); } else if (cpu_is_omap15xx()) { my_buffer_offset += sprintf(my_base + my_buffer_offset, "MPUI1510_CTRL_REG 0x%-8x \n" @@ -668,9 +668,9 @@ static int __init omap_pm_init(void) * These routines need to be in SRAM as that's the only * memory the MPU can see when it wakes up. */ - if (cpu_is_omap730()) { - omap_sram_suspend = omap_sram_push(omap730_cpu_suspend, - omap730_cpu_suspend_sz); + if (cpu_is_omap7xx()) { + omap_sram_suspend = omap_sram_push(omap7xx_cpu_suspend, + omap7xx_cpu_suspend_sz); } else if (cpu_is_omap15xx()) { omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend, omap1510_cpu_suspend_sz); @@ -686,8 +686,8 @@ static int __init omap_pm_init(void) pm_idle = omap1_pm_idle; - if (cpu_is_omap730()) - setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq); + if (cpu_is_omap7xx()) + setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq); else if (cpu_is_omap16xx()) setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq); @@ -700,8 +700,8 @@ static int __init omap_pm_init(void) omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL); /* Configure IDLECT3 */ - if (cpu_is_omap730()) - omap_writel(OMAP730_IDLECT3_VAL, OMAP730_IDLECT3); + if (cpu_is_omap7xx()) + omap_writel(OMAP7XX_IDLECT3_VAL, OMAP7XX_IDLECT3); else if (cpu_is_omap16xx()) omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3); diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h index c4f05bdcf8a6..56a647986ae9 100644 --- a/arch/arm/mach-omap1/pm.h +++ b/arch/arm/mach-omap1/pm.h @@ -98,13 +98,14 @@ #define OMAP1610_IDLECT3 0xfffece24 #define OMAP1610_IDLE_LOOP_REQUEST 0x0400 -#define OMAP730_IDLECT1_SLEEP_VAL 0x16c7 -#define OMAP730_IDLECT2_SLEEP_VAL 0x09c7 -#define OMAP730_IDLECT3_VAL 0x3f -#define OMAP730_IDLECT3 0xfffece24 -#define OMAP730_IDLE_LOOP_REQUEST 0x0C00 +#define OMAP7XX_IDLECT1_SLEEP_VAL 0x16c7 +#define OMAP7XX_IDLECT2_SLEEP_VAL 0x09c7 +#define OMAP7XX_IDLECT3_VAL 0x3f +#define OMAP7XX_IDLECT3 0xfffece24 +#define OMAP7XX_IDLE_LOOP_REQUEST 0x0C00 #if !defined(CONFIG_ARCH_OMAP730) && \ + !defined(CONFIG_ARCH_OMAP850) && \ !defined(CONFIG_ARCH_OMAP15XX) && \ !defined(CONFIG_ARCH_OMAP16XX) #warning "Power management for this processor not implemented yet" @@ -122,17 +123,17 @@ extern void allow_idle_sleep(void); extern void omap1_pm_idle(void); extern void omap1_pm_suspend(void); -extern void omap730_cpu_suspend(unsigned short, unsigned short); +extern void omap7xx_cpu_suspend(unsigned short, unsigned short); extern void omap1510_cpu_suspend(unsigned short, unsigned short); extern void omap1610_cpu_suspend(unsigned short, unsigned short); -extern void omap730_idle_loop_suspend(void); +extern void omap7xx_idle_loop_suspend(void); extern void omap1510_idle_loop_suspend(void); extern void omap1610_idle_loop_suspend(void); -extern unsigned int omap730_cpu_suspend_sz; +extern unsigned int omap7xx_cpu_suspend_sz; extern unsigned int omap1510_cpu_suspend_sz; extern unsigned int omap1610_cpu_suspend_sz; -extern unsigned int omap730_idle_loop_suspend_sz; +extern unsigned int omap7xx_idle_loop_suspend_sz; extern unsigned int omap1510_idle_loop_suspend_sz; extern unsigned int omap1610_idle_loop_suspend_sz; @@ -155,9 +156,9 @@ extern void omap_serial_wake_trigger(int enable); #define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x)) #define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] -#define MPUI730_SAVE(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] = omap_readl(x) -#define MPUI730_RESTORE(x) omap_writel((mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]), (x)) -#define MPUI730_SHOW(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] +#define MPUI7XX_SAVE(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x] = omap_readl(x) +#define MPUI7XX_RESTORE(x) omap_writel((mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x]), (x)) +#define MPUI7XX_SHOW(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x] #define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x) #define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x)) @@ -232,24 +233,24 @@ enum mpui1510_save_state { #endif }; -enum mpui730_save_state { - MPUI730_SLEEP_SAVE_START = 0, +enum mpui7xx_save_state { + MPUI7XX_SLEEP_SAVE_START = 0, /* * MPUI registers 32 bits */ - MPUI730_SLEEP_SAVE_MPUI_CTRL, - MPUI730_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG, - MPUI730_SLEEP_SAVE_MPUI_DSP_API_CONFIG, - MPUI730_SLEEP_SAVE_MPUI_DSP_STATUS, - MPUI730_SLEEP_SAVE_EMIFF_SDRAM_CONFIG, - MPUI730_SLEEP_SAVE_EMIFS_CONFIG, - MPUI730_SLEEP_SAVE_OMAP_IH1_MIR, - MPUI730_SLEEP_SAVE_OMAP_IH2_0_MIR, - MPUI730_SLEEP_SAVE_OMAP_IH2_1_MIR, -#if defined(CONFIG_ARCH_OMAP730) - MPUI730_SLEEP_SAVE_SIZE + MPUI7XX_SLEEP_SAVE_MPUI_CTRL, + MPUI7XX_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG, + MPUI7XX_SLEEP_SAVE_MPUI_DSP_API_CONFIG, + MPUI7XX_SLEEP_SAVE_MPUI_DSP_STATUS, + MPUI7XX_SLEEP_SAVE_EMIFF_SDRAM_CONFIG, + MPUI7XX_SLEEP_SAVE_EMIFS_CONFIG, + MPUI7XX_SLEEP_SAVE_OMAP_IH1_MIR, + MPUI7XX_SLEEP_SAVE_OMAP_IH2_0_MIR, + MPUI7XX_SLEEP_SAVE_OMAP_IH2_1_MIR, +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + MPUI7XX_SLEEP_SAVE_SIZE #else - MPUI730_SLEEP_SAVE_SIZE = 0 + MPUI7XX_SLEEP_SAVE_SIZE = 0 #endif }; diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index d23979bc0fd5..5ebf0946c76a 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -22,10 +22,10 @@ #include <asm/mach-types.h> -#include <mach/board.h> -#include <mach/mux.h> +#include <plat/board.h> +#include <plat/mux.h> #include <mach/gpio.h> -#include <mach/fpga.h> +#include <plat/fpga.h> static struct clk * uart1_ck; static struct clk * uart2_ck; @@ -64,7 +64,6 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p) static struct plat_serial8250_port serial_platform_data[] = { { - .membase = OMAP1_IO_ADDRESS(OMAP_UART1_BASE), .mapbase = OMAP_UART1_BASE, .irq = INT_UART1, .flags = UPF_BOOT_AUTOCONF, @@ -73,7 +72,6 @@ static struct plat_serial8250_port serial_platform_data[] = { .uartclk = OMAP16XX_BASE_BAUD * 16, }, { - .membase = OMAP1_IO_ADDRESS(OMAP_UART2_BASE), .mapbase = OMAP_UART2_BASE, .irq = INT_UART2, .flags = UPF_BOOT_AUTOCONF, @@ -82,7 +80,6 @@ static struct plat_serial8250_port serial_platform_data[] = { .uartclk = OMAP16XX_BASE_BAUD * 16, }, { - .membase = OMAP1_IO_ADDRESS(OMAP_UART3_BASE), .mapbase = OMAP_UART3_BASE, .irq = INT_UART3, .flags = UPF_BOOT_AUTOCONF, @@ -110,18 +107,11 @@ void __init omap_serial_init(void) { int i; - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { serial_platform_data[0].regshift = 0; serial_platform_data[1].regshift = 0; - serial_platform_data[0].irq = INT_730_UART_MODEM_1; - serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2; - } - - if (cpu_is_omap850()) { - serial_platform_data[0].regshift = 0; - serial_platform_data[1].regshift = 0; - serial_platform_data[0].irq = INT_850_UART_MODEM_1; - serial_platform_data[1].irq = INT_850_UART_MODEM_IRDA_2; + serial_platform_data[0].irq = INT_7XX_UART_MODEM_1; + serial_platform_data[1].irq = INT_7XX_UART_MODEM_IRDA_2; } if (cpu_is_omap15xx()) { @@ -131,6 +121,14 @@ void __init omap_serial_init(void) } for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { + + /* Static mapping, never released */ + serial_platform_data[i].membase = + ioremap(serial_platform_data[i].mapbase, SZ_2K); + if (!serial_platform_data[i].membase) { + printk(KERN_ERR "Could not ioremap uart%i\n", i); + continue; + } switch (i) { case 0: uart1_ck = clk_get(NULL, "uart1_ck"); diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S index 22e8568339b0..ef771ce8b030 100644 --- a/arch/arm/mach-omap1/sleep.S +++ b/arch/arm/mach-omap1/sleep.S @@ -1,7 +1,7 @@ /* * linux/arch/arm/mach-omap1/sleep.S * - * Low-level OMAP730/1510/1610 sleep/wakeUp support + * Low-level OMAP7XX/1510/1610 sleep/wakeUp support * * Initial SA1110 code: * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com> @@ -57,8 +57,8 @@ * */ -#if defined(CONFIG_ARCH_OMAP730) -ENTRY(omap730_cpu_suspend) +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) +ENTRY(omap7xx_cpu_suspend) @ save registers on stack stmfd sp!, {r0 - r12, lr} @@ -91,13 +91,13 @@ ENTRY(omap730_cpu_suspend) @ turn off clock domains @ do not disable PERCK (0x04) - mov r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff - orr r5, r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff00 + mov r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff + orr r5, r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff00 strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] @ request ARM idle - mov r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff - orr r3, r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff00 + mov r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff + orr r3, r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff00 strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] @ disable instruction cache @@ -113,7 +113,7 @@ ENTRY(omap730_cpu_suspend) mov r2, #0 mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt /* - * omap730_cpu_suspend()'s resume point. + * omap7xx_cpu_suspend()'s resume point. * * It will just start executing here, so we'll restore stuff from the * stack. @@ -132,9 +132,9 @@ ENTRY(omap730_cpu_suspend) @ restore regs and return ldmfd sp!, {r0 - r12, pc} -ENTRY(omap730_cpu_suspend_sz) - .word . - omap730_cpu_suspend -#endif /* CONFIG_ARCH_OMAP730 */ +ENTRY(omap7xx_cpu_suspend_sz) + .word . - omap7xx_cpu_suspend +#endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */ #ifdef CONFIG_ARCH_OMAP15XX ENTRY(omap1510_cpu_suspend) diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c index fd3f7396e162..9ad118563f7d 100644 --- a/arch/arm/mach-omap1/timer32k.c +++ b/arch/arm/mach-omap1/timer32k.c @@ -52,7 +52,7 @@ #include <asm/irq.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> -#include <mach/dmtimer.h> +#include <plat/dmtimer.h> struct sys_timer omap_timer; diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 8cb16777661a..1d54ad349bfd 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -31,7 +31,7 @@ obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o ifeq ($(CONFIG_PM),y) obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o obj-$(CONFIG_ARCH_OMAP24XX) += sleep24xx.o -obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o +obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o cpuidle34xx.o obj-$(CONFIG_PM_DEBUG) += pm-debug.o endif diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 42217b32f835..db9374bc528b 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -31,12 +31,12 @@ #include <asm/mach/flash.h> #include <mach/gpio.h> -#include <mach/mux.h> -#include <mach/board.h> -#include <mach/common.h> -#include <mach/gpmc.h> -#include <mach/usb.h> -#include <mach/gpmc-smc91x.h> +#include <plat/mux.h> +#include <plat/board.h> +#include <plat/common.h> +#include <plat/gpmc.h> +#include <plat/usb.h> +#include <plat/gpmc-smc91x.h> #include "mmc-twl4030.h" @@ -221,7 +221,7 @@ static void __init omap_2430sdp_map_io(void) MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board") /* Maintainer: Syed Khasim - Texas Instruments Inc */ .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_2430sdp_map_io, .init_irq = omap_2430sdp_init_irq, diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 0acb5560229c..a2abac98c569 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -30,16 +30,16 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/mcspi.h> -#include <mach/mux.h> -#include <mach/board.h> -#include <mach/usb.h> -#include <mach/common.h> -#include <mach/dma.h> -#include <mach/gpmc.h> +#include <plat/mcspi.h> +#include <plat/mux.h> +#include <plat/board.h> +#include <plat/usb.h> +#include <plat/common.h> +#include <plat/dma.h> +#include <plat/gpmc.h> -#include <mach/control.h> -#include <mach/gpmc-smc91x.h> +#include <plat/control.h> +#include <plat/gpmc-smc91x.h> #include "sdram-qimonda-hyb18m512160af-6.h" #include "mmc-twl4030.h" @@ -511,7 +511,7 @@ static void __init omap_3430sdp_map_io(void) MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") /* Maintainer: Syed Khasim - Texas Instruments Inc */ .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_3430sdp_map_io, .init_irq = omap_3430sdp_init_irq, diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 609a5a4a7e29..0c6be6b4a7e2 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -23,10 +23,10 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/board.h> -#include <mach/common.h> -#include <mach/control.h> -#include <mach/timer-gp.h> +#include <plat/board.h> +#include <plat/common.h> +#include <plat/control.h> +#include <plat/timer-gp.h> #include <asm/hardware/gic.h> static struct platform_device sdp4430_lcd_device = { @@ -52,8 +52,17 @@ static struct omap_board_config_kernel sdp4430_config[] __initdata = { static void __init gic_init_irq(void) { - gic_dist_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29); - gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)); + void __iomem *base; + + /* Static mapping, never released */ + base = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K); + BUG_ON(!base); + gic_dist_init(0, base, 29); + + /* Static mapping, never released */ + gic_cpu_base_addr = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512); + BUG_ON(!gic_cpu_base_addr); + gic_cpu_init(0, gic_cpu_base_addr); } static void __init omap_4430sdp_init_irq(void) @@ -84,7 +93,7 @@ static void __init omap_4430sdp_map_io(void) MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board") /* Maintainer: Santosh Shilimkar - Texas Instruments Inc */ .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_4430sdp_map_io, .init_irq = omap_4430sdp_init_irq, diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index a1132288c701..8a2ce77a02ec 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -33,13 +33,13 @@ #include <asm/mach/flash.h> #include <mach/gpio.h> -#include <mach/led.h> -#include <mach/mux.h> -#include <mach/usb.h> -#include <mach/board.h> -#include <mach/common.h> -#include <mach/gpmc.h> -#include <mach/control.h> +#include <plat/led.h> +#include <plat/mux.h> +#include <plat/usb.h> +#include <plat/board.h> +#include <plat/common.h> +#include <plat/gpmc.h> +#include <plat/control.h> /* LED & Switch macros */ #define LED0_GPIO13 13 @@ -333,7 +333,7 @@ static void __init omap_apollon_map_io(void) MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon") /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */ .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_apollon_map_io, .init_irq = omap_apollon_init_irq, diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 2e09a1c444cb..7e6e6ca88be5 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -26,10 +26,10 @@ #include <asm/mach/map.h> #include <mach/gpio.h> -#include <mach/mux.h> -#include <mach/usb.h> -#include <mach/board.h> -#include <mach/common.h> +#include <plat/mux.h> +#include <plat/usb.h> +#include <plat/board.h> +#include <plat/common.h> static struct omap_board_config_kernel generic_config[] = { }; @@ -56,7 +56,7 @@ static void __init omap_generic_map_io(void) MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx") /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */ .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_generic_map_io, .init_irq = omap_generic_init_irq, diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index eaa02d012c5c..cfb7f1257d20 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -31,16 +31,16 @@ #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <mach/control.h> +#include <plat/control.h> #include <mach/gpio.h> -#include <mach/mux.h> -#include <mach/usb.h> -#include <mach/board.h> -#include <mach/common.h> -#include <mach/keypad.h> -#include <mach/menelaus.h> -#include <mach/dma.h> -#include <mach/gpmc.h> +#include <plat/mux.h> +#include <plat/usb.h> +#include <plat/board.h> +#include <plat/common.h> +#include <plat/keypad.h> +#include <plat/menelaus.h> +#include <plat/dma.h> +#include <plat/gpmc.h> #define H4_FLASH_CS 0 #define H4_SMC91X_CS 1 @@ -376,7 +376,7 @@ static void __init omap_h4_map_io(void) MACHINE_START(OMAP_H4, "OMAP2420 H4 board") /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */ .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_h4_map_io, .init_irq = omap_h4_init_irq, diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index d57ec2f4d0a9..c062238fe881 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -33,15 +33,15 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/mcspi.h> +#include <plat/mcspi.h> #include <mach/gpio.h> -#include <mach/board.h> -#include <mach/common.h> -#include <mach/gpmc.h> +#include <plat/board.h> +#include <plat/common.h> +#include <plat/gpmc.h> #include <asm/delay.h> -#include <mach/control.h> -#include <mach/usb.h> +#include <plat/control.h> +#include <plat/usb.h> #include "mmc-twl4030.h" @@ -399,7 +399,7 @@ static void __init omap_ldp_map_io(void) MACHINE_START(OMAP_LDP, "OMAP LDP board") .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_ldp_map_io, .init_irq = omap_ldp_init_irq, diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 8341632d260b..764ab1ed576d 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -23,12 +23,12 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> -#include <mach/board.h> -#include <mach/common.h> +#include <plat/board.h> +#include <plat/common.h> #include <mach/irqs.h> -#include <mach/mcspi.h> -#include <mach/onenand.h> -#include <mach/serial.h> +#include <plat/mcspi.h> +#include <plat/onenand.h> +#include <plat/serial.h> static struct omap2_mcspi_device_config p54spi_mcspi_config = { .turbo_mode = 0, @@ -121,7 +121,7 @@ static void __init n8x0_init_machine(void) MACHINE_START(NOKIA_N800, "Nokia N800") .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = n8x0_map_io, .init_irq = n8x0_init_irq, @@ -131,7 +131,7 @@ MACHINE_END MACHINE_START(NOKIA_N810, "Nokia N810") .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = n8x0_map_io, .init_irq = n8x0_init_irq, @@ -141,7 +141,7 @@ MACHINE_END MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = n8x0_map_io, .init_irq = n8x0_init_irq, diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 08b0816afa61..76c727ed8da5 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -37,13 +37,13 @@ #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <mach/board.h> -#include <mach/common.h> -#include <mach/gpmc.h> -#include <mach/nand.h> -#include <mach/mux.h> -#include <mach/usb.h> -#include <mach/timer-gp.h> +#include <plat/board.h> +#include <plat/common.h> +#include <plat/gpmc.h> +#include <plat/nand.h> +#include <plat/mux.h> +#include <plat/usb.h> +#include <plat/timer-gp.h> #include "mmc-twl4030.h" @@ -429,7 +429,7 @@ static void __init omap3_beagle_map_io(void) MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") /* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */ .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_beagle_map_io, .init_irq = omap3_beagle_init_irq, diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 4c4d7f8dbd72..522ff6288c6f 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -33,11 +33,11 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/board.h> -#include <mach/mux.h> -#include <mach/usb.h> -#include <mach/common.h> -#include <mach/mcspi.h> +#include <plat/board.h> +#include <plat/mux.h> +#include <plat/usb.h> +#include <plat/common.h> +#include <plat/mcspi.h> #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -324,7 +324,7 @@ static void __init omap3_evm_map_io(void) MACHINE_START(OMAP3EVM, "OMAP3 EVM") /* Maintainer: Syed Mohammed Khasim - Texas Instruments */ .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_evm_map_io, .init_irq = omap3_evm_init_irq, diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 7519edb69155..7fb9023b4239 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -34,13 +34,13 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/board.h> -#include <mach/common.h> +#include <plat/board.h> +#include <plat/common.h> #include <mach/gpio.h> #include <mach/hardware.h> -#include <mach/mcspi.h> -#include <mach/usb.h> -#include <mach/mux.h> +#include <plat/mcspi.h> +#include <plat/usb.h> +#include <plat/mux.h> #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -412,7 +412,7 @@ static void __init omap3pandora_map_io(void) MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console") .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3pandora_map_io, .init_irq = omap3pandora_init_irq, diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 9917d2fddc2f..461522c1bced 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -38,14 +38,14 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <mach/board.h> -#include <mach/common.h> +#include <plat/board.h> +#include <plat/common.h> #include <mach/gpio.h> -#include <mach/gpmc.h> +#include <plat/gpmc.h> #include <mach/hardware.h> -#include <mach/nand.h> -#include <mach/mux.h> -#include <mach/usb.h> +#include <plat/nand.h> +#include <plat/mux.h> +#include <plat/usb.h> #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -67,7 +67,7 @@ #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) -#include <mach/mcspi.h> +#include <plat/mcspi.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> @@ -451,7 +451,7 @@ static void __init overo_map_io(void) MACHINE_START(OVERO, "Gumstix Overo") .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = overo_map_io, .init_irq = overo_init_irq, diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index e34d96a825e3..cf4583a5d284 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -22,14 +22,14 @@ #include <linux/gpio.h> #include <linux/mmc/host.h> -#include <mach/mcspi.h> -#include <mach/mux.h> -#include <mach/board.h> -#include <mach/common.h> -#include <mach/dma.h> -#include <mach/gpmc.h> -#include <mach/onenand.h> -#include <mach/gpmc-smc91x.h> +#include <plat/mcspi.h> +#include <plat/mux.h> +#include <plat/board.h> +#include <plat/common.h> +#include <plat/dma.h> +#include <plat/gpmc.h> +#include <plat/onenand.h> +#include <plat/gpmc-smc91x.h> #include "mmc-twl4030.h" diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 78869a9a1cc2..f1e7e5bbf985 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -22,13 +22,13 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/mcspi.h> -#include <mach/mux.h> -#include <mach/board.h> -#include <mach/common.h> -#include <mach/dma.h> -#include <mach/gpmc.h> -#include <mach/usb.h> +#include <plat/mcspi.h> +#include <plat/mux.h> +#include <plat/board.h> +#include <plat/common.h> +#include <plat/dma.h> +#include <plat/gpmc.h> +#include <plat/usb.h> static struct omap_lcd_config rx51_lcd_config = { .ctrl_name = "internal", @@ -84,7 +84,7 @@ static void __init rx51_map_io(void) MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") /* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */ .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = rx51_map_io, .init_irq = rx51_init_irq, diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index 1f13e2a1f322..91ecddc9057a 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -14,7 +14,7 @@ #include <linux/smsc911x.h> #include <linux/interrupt.h> -#include <mach/gpmc.h> +#include <plat/gpmc.h> #define ZOOM2_SMSC911X_CS 7 #define ZOOM2_SMSC911X_GPIO 158 diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index 51e0b3ba5f3a..ea01a0fa07fb 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -21,8 +21,8 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/common.h> -#include <mach/usb.h> +#include <plat/common.h> +#include <plat/usb.h> #include "mmc-twl4030.h" #include "sdram-micron-mt46h32m32lf-6.h" @@ -282,7 +282,7 @@ static void __init omap_zoom2_map_io(void) MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_zoom2_map_io, .init_irq = omap_zoom2_init_irq, diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index f2a92d614f0f..4716206547ac 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -24,13 +24,13 @@ #include <linux/io.h> #include <linux/bitops.h> -#include <mach/clock.h> -#include <mach/clockdomain.h> -#include <mach/cpu.h> -#include <mach/prcm.h> +#include <plat/clock.h> +#include <plat/clockdomain.h> +#include <plat/cpu.h> +#include <plat/prcm.h> #include <asm/div64.h> -#include <mach/sdrc.h> +#include <plat/sdrc.h> #include "sdrc.h" #include "clock.h" #include "prm.h" diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 9ae7540f8af2..43b6bedaafd6 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -16,7 +16,7 @@ #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H #define __ARCH_ARM_MACH_OMAP2_CLOCK_H -#include <mach/clock.h> +#include <plat/clock.h> /* The maximum error between a target DPLL rate and the rounded rate in Hz */ #define DEFAULT_DPLL_RATE_TOLERANCE 50000 diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index e2dbedd581e8..e70e7e000eaa 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -28,13 +28,13 @@ #include <linux/cpufreq.h> #include <linux/bitops.h> -#include <mach/clock.h> -#include <mach/sram.h> -#include <mach/prcm.h> +#include <plat/clock.h> +#include <plat/sram.h> +#include <plat/prcm.h> #include <asm/div64.h> #include <asm/clkdev.h> -#include <mach/sdrc.h> +#include <plat/sdrc.h> #include "clock.h" #include "prm.h" #include "prm-regbits-24xx.h" diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 7c5c00df3c70..225c1a7385ee 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -27,13 +27,13 @@ #include <linux/limits.h> #include <linux/bitops.h> -#include <mach/cpu.h> -#include <mach/clock.h> -#include <mach/sram.h> +#include <plat/cpu.h> +#include <plat/clock.h> +#include <plat/sram.h> #include <asm/div64.h> #include <asm/clkdev.h> -#include <mach/sdrc.h> +#include <plat/sdrc.h> #include "clock.h" #include "prm.h" #include "prm-regbits-34xx.h" diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index 9565c05bebd2..8fe1bcb23dd9 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -19,7 +19,7 @@ #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H #define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H -#include <mach/control.h> +#include <plat/control.h> #include "clock.h" #include "cm.h" diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index 58aff8485df9..fcd82320a6a3 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -28,14 +28,14 @@ #include <linux/bitops.h> -#include <mach/clock.h> +#include <plat/clock.h> #include "prm.h" #include "prm-regbits-24xx.h" #include "cm.h" -#include <mach/powerdomain.h> -#include <mach/clockdomain.h> +#include <plat/powerdomain.h> +#include <plat/clockdomain.h> /* clkdm_list contains all registered struct clockdomains */ static LIST_HEAD(clkdm_list); diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h index fe319ae4ca0a..c4ee0761d908 100644 --- a/arch/arm/mach-omap2/clockdomains.h +++ b/arch/arm/mach-omap2/clockdomains.h @@ -10,7 +10,7 @@ #ifndef __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_H #define __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_H -#include <mach/clockdomain.h> +#include <plat/clockdomain.h> /* * OMAP2/3-common clockdomains diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index cfd0b726ba44..a2fcfcc253cc 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -17,11 +17,11 @@ #include "prcm-common.h" #define OMAP2420_CM_REGADDR(module, reg) \ - OMAP2_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg)) + OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg)) #define OMAP2430_CM_REGADDR(module, reg) \ - OMAP2_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg)) + OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg)) #define OMAP34XX_CM_REGADDR(module, reg) \ - OMAP2_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg)) + OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg)) /* * Architecture-specific global CM registers diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 5f3aad977842..cdd1f35636dd 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -15,11 +15,127 @@ #include <linux/kernel.h> #include <linux/io.h> -#include <mach/common.h> -#include <mach/control.h> +#include <plat/common.h> +#include <plat/control.h> +#include <plat/sdrc.h> +#include "cm-regbits-34xx.h" +#include "prm-regbits-34xx.h" +#include "cm.h" +#include "prm.h" +#include "sdrc.h" static void __iomem *omap2_ctrl_base; +#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) +struct omap3_scratchpad { + u32 boot_config_ptr; + u32 public_restore_ptr; + u32 secure_ram_restore_ptr; + u32 sdrc_module_semaphore; + u32 prcm_block_offset; + u32 sdrc_block_offset; +}; + +struct omap3_scratchpad_prcm_block { + u32 prm_clksrc_ctrl; + u32 prm_clksel; + u32 cm_clksel_core; + u32 cm_clksel_wkup; + u32 cm_clken_pll; + u32 cm_autoidle_pll; + u32 cm_clksel1_pll; + u32 cm_clksel2_pll; + u32 cm_clksel3_pll; + u32 cm_clken_pll_mpu; + u32 cm_autoidle_pll_mpu; + u32 cm_clksel1_pll_mpu; + u32 cm_clksel2_pll_mpu; + u32 prcm_block_size; +}; + +struct omap3_scratchpad_sdrc_block { + u16 sysconfig; + u16 cs_cfg; + u16 sharing; + u16 err_type; + u32 dll_a_ctrl; + u32 dll_b_ctrl; + u32 power; + u32 cs_0; + u32 mcfg_0; + u16 mr_0; + u16 emr_1_0; + u16 emr_2_0; + u16 emr_3_0; + u32 actim_ctrla_0; + u32 actim_ctrlb_0; + u32 rfr_ctrl_0; + u32 cs_1; + u32 mcfg_1; + u16 mr_1; + u16 emr_1_1; + u16 emr_2_1; + u16 emr_3_1; + u32 actim_ctrla_1; + u32 actim_ctrlb_1; + u32 rfr_ctrl_1; + u16 dcdl_1_ctrl; + u16 dcdl_2_ctrl; + u32 flags; + u32 block_size; +}; + +void *omap3_secure_ram_storage; + +/* + * This is used to store ARM registers in SDRAM before attempting + * an MPU OFF. The save and restore happens from the SRAM sleep code. + * The address is stored in scratchpad, so that it can be used + * during the restore path. + */ +u32 omap3_arm_context[128]; + +struct omap3_control_regs { + u32 sysconfig; + u32 devconf0; + u32 mem_dftrw0; + u32 mem_dftrw1; + u32 msuspendmux_0; + u32 msuspendmux_1; + u32 msuspendmux_2; + u32 msuspendmux_3; + u32 msuspendmux_4; + u32 msuspendmux_5; + u32 sec_ctrl; + u32 devconf1; + u32 csirxfe; + u32 iva2_bootaddr; + u32 iva2_bootmod; + u32 debobs_0; + u32 debobs_1; + u32 debobs_2; + u32 debobs_3; + u32 debobs_4; + u32 debobs_5; + u32 debobs_6; + u32 debobs_7; + u32 debobs_8; + u32 prog_io0; + u32 prog_io1; + u32 dss_dpll_spreading; + u32 core_dpll_spreading; + u32 per_dpll_spreading; + u32 usbhost_dpll_spreading; + u32 pbias_lite; + u32 temp_sensor; + u32 sramldo4; + u32 sramldo5; + u32 csi; +}; + +static struct omap3_control_regs control_context; +#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */ + #define OMAP_CTRL_REGADDR(reg) (omap2_ctrl_base + (reg)) void __init omap2_set_globals_control(struct omap_globals *omap2_globals) @@ -62,3 +178,268 @@ void omap_ctrl_writel(u32 val, u16 offset) __raw_writel(val, OMAP_CTRL_REGADDR(offset)); } +#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) +/* + * Clears the scratchpad contents in case of cold boot- + * called during bootup + */ +void omap3_clear_scratchpad_contents(void) +{ + u32 max_offset = OMAP343X_SCRATCHPAD_ROM_OFFSET; + u32 *v_addr; + u32 offset = 0; + v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM); + if (prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) & + OMAP3430_GLOBAL_COLD_RST) { + for ( ; offset <= max_offset; offset += 0x4) + __raw_writel(0x0, (v_addr + offset)); + prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST, OMAP3430_GR_MOD, + OMAP3_PRM_RSTST_OFFSET); + } +} + +/* Populate the scratchpad structure with restore structure */ +void omap3_save_scratchpad_contents(void) +{ + void * __iomem scratchpad_address; + u32 arm_context_addr; + struct omap3_scratchpad scratchpad_contents; + struct omap3_scratchpad_prcm_block prcm_block_contents; + struct omap3_scratchpad_sdrc_block sdrc_block_contents; + + /* Populate the Scratchpad contents */ + scratchpad_contents.boot_config_ptr = 0x0; + if (omap_rev() != OMAP3430_REV_ES3_0 && + omap_rev() != OMAP3430_REV_ES3_1) + scratchpad_contents.public_restore_ptr = + virt_to_phys(get_restore_pointer()); + else + scratchpad_contents.public_restore_ptr = + virt_to_phys(get_es3_restore_pointer()); + if (omap_type() == OMAP2_DEVICE_TYPE_GP) + scratchpad_contents.secure_ram_restore_ptr = 0x0; + else + scratchpad_contents.secure_ram_restore_ptr = + (u32) __pa(omap3_secure_ram_storage); + scratchpad_contents.sdrc_module_semaphore = 0x0; + scratchpad_contents.prcm_block_offset = 0x2C; + scratchpad_contents.sdrc_block_offset = 0x64; + + /* Populate the PRCM block contents */ + prcm_block_contents.prm_clksrc_ctrl = prm_read_mod_reg(OMAP3430_GR_MOD, + OMAP3_PRM_CLKSRC_CTRL_OFFSET); + prcm_block_contents.prm_clksel = prm_read_mod_reg(OMAP3430_CCR_MOD, + OMAP3_PRM_CLKSEL_OFFSET); + prcm_block_contents.cm_clksel_core = + cm_read_mod_reg(CORE_MOD, CM_CLKSEL); + prcm_block_contents.cm_clksel_wkup = + cm_read_mod_reg(WKUP_MOD, CM_CLKSEL); + prcm_block_contents.cm_clken_pll = + cm_read_mod_reg(PLL_MOD, CM_CLKEN); + prcm_block_contents.cm_autoidle_pll = + cm_read_mod_reg(PLL_MOD, OMAP3430_CM_AUTOIDLE_PLL); + prcm_block_contents.cm_clksel1_pll = + cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL); + prcm_block_contents.cm_clksel2_pll = + cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL2_PLL); + prcm_block_contents.cm_clksel3_pll = + cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL3); + prcm_block_contents.cm_clken_pll_mpu = + cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKEN_PLL); + prcm_block_contents.cm_autoidle_pll_mpu = + cm_read_mod_reg(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL); + prcm_block_contents.cm_clksel1_pll_mpu = + cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL); + prcm_block_contents.cm_clksel2_pll_mpu = + cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL); + prcm_block_contents.prcm_block_size = 0x0; + + /* Populate the SDRC block contents */ + sdrc_block_contents.sysconfig = + (sdrc_read_reg(SDRC_SYSCONFIG) & 0xFFFF); + sdrc_block_contents.cs_cfg = + (sdrc_read_reg(SDRC_CS_CFG) & 0xFFFF); + sdrc_block_contents.sharing = + (sdrc_read_reg(SDRC_SHARING) & 0xFFFF); + sdrc_block_contents.err_type = + (sdrc_read_reg(SDRC_ERR_TYPE) & 0xFFFF); + sdrc_block_contents.dll_a_ctrl = sdrc_read_reg(SDRC_DLLA_CTRL); + sdrc_block_contents.dll_b_ctrl = 0x0; + /* + * Due to a OMAP3 errata (1.142), on EMU/HS devices SRDC should + * be programed to issue automatic self refresh on timeout + * of AUTO_CNT = 1 prior to any transition to OFF mode. + */ + if ((omap_type() != OMAP2_DEVICE_TYPE_GP) + && (omap_rev() >= OMAP3430_REV_ES3_0)) + sdrc_block_contents.power = (sdrc_read_reg(SDRC_POWER) & + ~(SDRC_POWER_AUTOCOUNT_MASK| + SDRC_POWER_CLKCTRL_MASK)) | + (1 << SDRC_POWER_AUTOCOUNT_SHIFT) | + SDRC_SELF_REFRESH_ON_AUTOCOUNT; + else + sdrc_block_contents.power = sdrc_read_reg(SDRC_POWER); + + sdrc_block_contents.cs_0 = 0x0; + sdrc_block_contents.mcfg_0 = sdrc_read_reg(SDRC_MCFG_0); + sdrc_block_contents.mr_0 = (sdrc_read_reg(SDRC_MR_0) & 0xFFFF); + sdrc_block_contents.emr_1_0 = 0x0; + sdrc_block_contents.emr_2_0 = 0x0; + sdrc_block_contents.emr_3_0 = 0x0; + sdrc_block_contents.actim_ctrla_0 = + sdrc_read_reg(SDRC_ACTIM_CTRL_A_0); + sdrc_block_contents.actim_ctrlb_0 = + sdrc_read_reg(SDRC_ACTIM_CTRL_B_0); + sdrc_block_contents.rfr_ctrl_0 = + sdrc_read_reg(SDRC_RFR_CTRL_0); + sdrc_block_contents.cs_1 = 0x0; + sdrc_block_contents.mcfg_1 = sdrc_read_reg(SDRC_MCFG_1); + sdrc_block_contents.mr_1 = sdrc_read_reg(SDRC_MR_1) & 0xFFFF; + sdrc_block_contents.emr_1_1 = 0x0; + sdrc_block_contents.emr_2_1 = 0x0; + sdrc_block_contents.emr_3_1 = 0x0; + sdrc_block_contents.actim_ctrla_1 = + sdrc_read_reg(SDRC_ACTIM_CTRL_A_1); + sdrc_block_contents.actim_ctrlb_1 = + sdrc_read_reg(SDRC_ACTIM_CTRL_B_1); + sdrc_block_contents.rfr_ctrl_1 = + sdrc_read_reg(SDRC_RFR_CTRL_1); + sdrc_block_contents.dcdl_1_ctrl = 0x0; + sdrc_block_contents.dcdl_2_ctrl = 0x0; + sdrc_block_contents.flags = 0x0; + sdrc_block_contents.block_size = 0x0; + + arm_context_addr = virt_to_phys(omap3_arm_context); + + /* Copy all the contents to the scratchpad location */ + scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD); + memcpy_toio(scratchpad_address, &scratchpad_contents, + sizeof(scratchpad_contents)); + /* Scratchpad contents being 32 bits, a divide by 4 done here */ + memcpy_toio(scratchpad_address + + scratchpad_contents.prcm_block_offset, + &prcm_block_contents, sizeof(prcm_block_contents)); + memcpy_toio(scratchpad_address + + scratchpad_contents.sdrc_block_offset, + &sdrc_block_contents, sizeof(sdrc_block_contents)); + /* + * Copies the address of the location in SDRAM where ARM + * registers get saved during a MPU OFF transition. + */ + memcpy_toio(scratchpad_address + + scratchpad_contents.sdrc_block_offset + + sizeof(sdrc_block_contents), &arm_context_addr, 4); +} + +void omap3_control_save_context(void) +{ + control_context.sysconfig = omap_ctrl_readl(OMAP2_CONTROL_SYSCONFIG); + control_context.devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); + control_context.mem_dftrw0 = + omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW0); + control_context.mem_dftrw1 = + omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW1); + control_context.msuspendmux_0 = + omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_0); + control_context.msuspendmux_1 = + omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_1); + control_context.msuspendmux_2 = + omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_2); + control_context.msuspendmux_3 = + omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_3); + control_context.msuspendmux_4 = + omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_4); + control_context.msuspendmux_5 = + omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_5); + control_context.sec_ctrl = omap_ctrl_readl(OMAP2_CONTROL_SEC_CTRL); + control_context.devconf1 = omap_ctrl_readl(OMAP343X_CONTROL_DEVCONF1); + control_context.csirxfe = omap_ctrl_readl(OMAP343X_CONTROL_CSIRXFE); + control_context.iva2_bootaddr = + omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTADDR); + control_context.iva2_bootmod = + omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTMOD); + control_context.debobs_0 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(0)); + control_context.debobs_1 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(1)); + control_context.debobs_2 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(2)); + control_context.debobs_3 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(3)); + control_context.debobs_4 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(4)); + control_context.debobs_5 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(5)); + control_context.debobs_6 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(6)); + control_context.debobs_7 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(7)); + control_context.debobs_8 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(8)); + control_context.prog_io0 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO0); + control_context.prog_io1 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1); + control_context.dss_dpll_spreading = + omap_ctrl_readl(OMAP343X_CONTROL_DSS_DPLL_SPREADING); + control_context.core_dpll_spreading = + omap_ctrl_readl(OMAP343X_CONTROL_CORE_DPLL_SPREADING); + control_context.per_dpll_spreading = + omap_ctrl_readl(OMAP343X_CONTROL_PER_DPLL_SPREADING); + control_context.usbhost_dpll_spreading = + omap_ctrl_readl(OMAP343X_CONTROL_USBHOST_DPLL_SPREADING); + control_context.pbias_lite = + omap_ctrl_readl(OMAP343X_CONTROL_PBIAS_LITE); + control_context.temp_sensor = + omap_ctrl_readl(OMAP343X_CONTROL_TEMP_SENSOR); + control_context.sramldo4 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO4); + control_context.sramldo5 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO5); + control_context.csi = omap_ctrl_readl(OMAP343X_CONTROL_CSI); + return; +} + +void omap3_control_restore_context(void) +{ + omap_ctrl_writel(control_context.sysconfig, OMAP2_CONTROL_SYSCONFIG); + omap_ctrl_writel(control_context.devconf0, OMAP2_CONTROL_DEVCONF0); + omap_ctrl_writel(control_context.mem_dftrw0, + OMAP343X_CONTROL_MEM_DFTRW0); + omap_ctrl_writel(control_context.mem_dftrw1, + OMAP343X_CONTROL_MEM_DFTRW1); + omap_ctrl_writel(control_context.msuspendmux_0, + OMAP2_CONTROL_MSUSPENDMUX_0); + omap_ctrl_writel(control_context.msuspendmux_1, + OMAP2_CONTROL_MSUSPENDMUX_1); + omap_ctrl_writel(control_context.msuspendmux_2, + OMAP2_CONTROL_MSUSPENDMUX_2); + omap_ctrl_writel(control_context.msuspendmux_3, + OMAP2_CONTROL_MSUSPENDMUX_3); + omap_ctrl_writel(control_context.msuspendmux_4, + OMAP2_CONTROL_MSUSPENDMUX_4); + omap_ctrl_writel(control_context.msuspendmux_5, + OMAP2_CONTROL_MSUSPENDMUX_5); + omap_ctrl_writel(control_context.sec_ctrl, OMAP2_CONTROL_SEC_CTRL); + omap_ctrl_writel(control_context.devconf1, OMAP343X_CONTROL_DEVCONF1); + omap_ctrl_writel(control_context.csirxfe, OMAP343X_CONTROL_CSIRXFE); + omap_ctrl_writel(control_context.iva2_bootaddr, + OMAP343X_CONTROL_IVA2_BOOTADDR); + omap_ctrl_writel(control_context.iva2_bootmod, + OMAP343X_CONTROL_IVA2_BOOTMOD); + omap_ctrl_writel(control_context.debobs_0, OMAP343X_CONTROL_DEBOBS(0)); + omap_ctrl_writel(control_context.debobs_1, OMAP343X_CONTROL_DEBOBS(1)); + omap_ctrl_writel(control_context.debobs_2, OMAP343X_CONTROL_DEBOBS(2)); + omap_ctrl_writel(control_context.debobs_3, OMAP343X_CONTROL_DEBOBS(3)); + omap_ctrl_writel(control_context.debobs_4, OMAP343X_CONTROL_DEBOBS(4)); + omap_ctrl_writel(control_context.debobs_5, OMAP343X_CONTROL_DEBOBS(5)); + omap_ctrl_writel(control_context.debobs_6, OMAP343X_CONTROL_DEBOBS(6)); + omap_ctrl_writel(control_context.debobs_7, OMAP343X_CONTROL_DEBOBS(7)); + omap_ctrl_writel(control_context.debobs_8, OMAP343X_CONTROL_DEBOBS(8)); + omap_ctrl_writel(control_context.prog_io0, OMAP343X_CONTROL_PROG_IO0); + omap_ctrl_writel(control_context.prog_io1, OMAP343X_CONTROL_PROG_IO1); + omap_ctrl_writel(control_context.dss_dpll_spreading, + OMAP343X_CONTROL_DSS_DPLL_SPREADING); + omap_ctrl_writel(control_context.core_dpll_spreading, + OMAP343X_CONTROL_CORE_DPLL_SPREADING); + omap_ctrl_writel(control_context.per_dpll_spreading, + OMAP343X_CONTROL_PER_DPLL_SPREADING); + omap_ctrl_writel(control_context.usbhost_dpll_spreading, + OMAP343X_CONTROL_USBHOST_DPLL_SPREADING); + omap_ctrl_writel(control_context.pbias_lite, + OMAP343X_CONTROL_PBIAS_LITE); + omap_ctrl_writel(control_context.temp_sensor, + OMAP343X_CONTROL_TEMP_SENSOR); + omap_ctrl_writel(control_context.sramldo4, OMAP343X_CONTROL_SRAMLDO4); + omap_ctrl_writel(control_context.sramldo5, OMAP343X_CONTROL_SRAMLDO5); + omap_ctrl_writel(control_context.csi, OMAP343X_CONTROL_CSI); + return; +} +#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */ diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c new file mode 100644 index 000000000000..a26d6a08ae3f --- /dev/null +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -0,0 +1,318 @@ +/* + * linux/arch/arm/mach-omap2/cpuidle34xx.c + * + * OMAP3 CPU IDLE Routines + * + * Copyright (C) 2008 Texas Instruments, Inc. + * Rajendra Nayak <rnayak@ti.com> + * + * Copyright (C) 2007 Texas Instruments, Inc. + * Karthik Dasu <karthik-dp@ti.com> + * + * Copyright (C) 2006 Nokia Corporation + * Tony Lindgren <tony@atomide.com> + * + * Copyright (C) 2005 Texas Instruments, Inc. + * Richard Woodruff <r-woodruff2@ti.com> + * + * Based on pm.c for omap2 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/sched.h> +#include <linux/cpuidle.h> + +#include <plat/prcm.h> +#include <plat/irqs.h> +#include <plat/powerdomain.h> +#include <plat/clockdomain.h> +#include <plat/control.h> +#include <plat/serial.h> + +#include "pm.h" + +#ifdef CONFIG_CPU_IDLE + +#define OMAP3_MAX_STATES 7 +#define OMAP3_STATE_C1 0 /* C1 - MPU WFI + Core active */ +#define OMAP3_STATE_C2 1 /* C2 - MPU WFI + Core inactive */ +#define OMAP3_STATE_C3 2 /* C3 - MPU CSWR + Core inactive */ +#define OMAP3_STATE_C4 3 /* C4 - MPU OFF + Core iactive */ +#define OMAP3_STATE_C5 4 /* C5 - MPU RET + Core RET */ +#define OMAP3_STATE_C6 5 /* C6 - MPU OFF + Core RET */ +#define OMAP3_STATE_C7 6 /* C7 - MPU OFF + Core OFF */ + +struct omap3_processor_cx { + u8 valid; + u8 type; + u32 sleep_latency; + u32 wakeup_latency; + u32 mpu_state; + u32 core_state; + u32 threshold; + u32 flags; +}; + +struct omap3_processor_cx omap3_power_states[OMAP3_MAX_STATES]; +struct omap3_processor_cx current_cx_state; +struct powerdomain *mpu_pd, *core_pd; + +static int omap3_idle_bm_check(void) +{ + if (!omap3_can_sleep()) + return 1; + return 0; +} + +static int _cpuidle_allow_idle(struct powerdomain *pwrdm, + struct clockdomain *clkdm) +{ + omap2_clkdm_allow_idle(clkdm); + return 0; +} + +static int _cpuidle_deny_idle(struct powerdomain *pwrdm, + struct clockdomain *clkdm) +{ + omap2_clkdm_deny_idle(clkdm); + return 0; +} + +/** + * omap3_enter_idle - Programs OMAP3 to enter the specified state + * @dev: cpuidle device + * @state: The target state to be programmed + * + * Called from the CPUidle framework to program the device to the + * specified target state selected by the governor. + */ +static int omap3_enter_idle(struct cpuidle_device *dev, + struct cpuidle_state *state) +{ + struct omap3_processor_cx *cx = cpuidle_get_statedata(state); + struct timespec ts_preidle, ts_postidle, ts_idle; + u32 mpu_state = cx->mpu_state, core_state = cx->core_state; + + current_cx_state = *cx; + + /* Used to keep track of the total time in idle */ + getnstimeofday(&ts_preidle); + + local_irq_disable(); + local_fiq_disable(); + + if (!enable_off_mode) { + if (mpu_state < PWRDM_POWER_RET) + mpu_state = PWRDM_POWER_RET; + if (core_state < PWRDM_POWER_RET) + core_state = PWRDM_POWER_RET; + } + + pwrdm_set_next_pwrst(mpu_pd, mpu_state); + pwrdm_set_next_pwrst(core_pd, core_state); + + if (omap_irq_pending() || need_resched()) + goto return_sleep_time; + + if (cx->type == OMAP3_STATE_C1) { + pwrdm_for_each_clkdm(mpu_pd, _cpuidle_deny_idle); + pwrdm_for_each_clkdm(core_pd, _cpuidle_deny_idle); + } + + /* Execute ARM wfi */ + omap_sram_idle(); + + if (cx->type == OMAP3_STATE_C1) { + pwrdm_for_each_clkdm(mpu_pd, _cpuidle_allow_idle); + pwrdm_for_each_clkdm(core_pd, _cpuidle_allow_idle); + } + +return_sleep_time: + getnstimeofday(&ts_postidle); + ts_idle = timespec_sub(ts_postidle, ts_preidle); + + local_irq_enable(); + local_fiq_enable(); + + return (u32)timespec_to_ns(&ts_idle)/1000; +} + +/** + * omap3_enter_idle_bm - Checks for any bus activity + * @dev: cpuidle device + * @state: The target state to be programmed + * + * Used for C states with CPUIDLE_FLAG_CHECK_BM flag set. This + * function checks for any pending activity and then programs the + * device to the specified or a safer state. + */ +static int omap3_enter_idle_bm(struct cpuidle_device *dev, + struct cpuidle_state *state) +{ + struct cpuidle_state *new_state = state; + + if ((state->flags & CPUIDLE_FLAG_CHECK_BM) && omap3_idle_bm_check()) { + BUG_ON(!dev->safe_state); + new_state = dev->safe_state; + } + + dev->last_state = new_state; + return omap3_enter_idle(dev, new_state); +} + +DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev); + +/* omap3_init_power_states - Initialises the OMAP3 specific C states. + * + * Below is the desciption of each C state. + * C1 . MPU WFI + Core active + * C2 . MPU WFI + Core inactive + * C3 . MPU CSWR + Core inactive + * C4 . MPU OFF + Core inactive + * C5 . MPU CSWR + Core CSWR + * C6 . MPU OFF + Core CSWR + * C7 . MPU OFF + Core OFF + */ +void omap_init_power_states(void) +{ + /* C1 . MPU WFI + Core active */ + omap3_power_states[OMAP3_STATE_C1].valid = 1; + omap3_power_states[OMAP3_STATE_C1].type = OMAP3_STATE_C1; + omap3_power_states[OMAP3_STATE_C1].sleep_latency = 2; + omap3_power_states[OMAP3_STATE_C1].wakeup_latency = 2; + omap3_power_states[OMAP3_STATE_C1].threshold = 5; + omap3_power_states[OMAP3_STATE_C1].mpu_state = PWRDM_POWER_ON; + omap3_power_states[OMAP3_STATE_C1].core_state = PWRDM_POWER_ON; + omap3_power_states[OMAP3_STATE_C1].flags = CPUIDLE_FLAG_TIME_VALID; + + /* C2 . MPU WFI + Core inactive */ + omap3_power_states[OMAP3_STATE_C2].valid = 1; + omap3_power_states[OMAP3_STATE_C2].type = OMAP3_STATE_C2; + omap3_power_states[OMAP3_STATE_C2].sleep_latency = 10; + omap3_power_states[OMAP3_STATE_C2].wakeup_latency = 10; + omap3_power_states[OMAP3_STATE_C2].threshold = 30; + omap3_power_states[OMAP3_STATE_C2].mpu_state = PWRDM_POWER_ON; + omap3_power_states[OMAP3_STATE_C2].core_state = PWRDM_POWER_ON; + omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID; + + /* C3 . MPU CSWR + Core inactive */ + omap3_power_states[OMAP3_STATE_C3].valid = 1; + omap3_power_states[OMAP3_STATE_C3].type = OMAP3_STATE_C3; + omap3_power_states[OMAP3_STATE_C3].sleep_latency = 50; + omap3_power_states[OMAP3_STATE_C3].wakeup_latency = 50; + omap3_power_states[OMAP3_STATE_C3].threshold = 300; + omap3_power_states[OMAP3_STATE_C3].mpu_state = PWRDM_POWER_RET; + omap3_power_states[OMAP3_STATE_C3].core_state = PWRDM_POWER_ON; + omap3_power_states[OMAP3_STATE_C3].flags = CPUIDLE_FLAG_TIME_VALID | + CPUIDLE_FLAG_CHECK_BM; + + /* C4 . MPU OFF + Core inactive */ + omap3_power_states[OMAP3_STATE_C4].valid = 1; + omap3_power_states[OMAP3_STATE_C4].type = OMAP3_STATE_C4; + omap3_power_states[OMAP3_STATE_C4].sleep_latency = 1500; + omap3_power_states[OMAP3_STATE_C4].wakeup_latency = 1800; + omap3_power_states[OMAP3_STATE_C4].threshold = 4000; + omap3_power_states[OMAP3_STATE_C4].mpu_state = PWRDM_POWER_OFF; + omap3_power_states[OMAP3_STATE_C4].core_state = PWRDM_POWER_ON; + omap3_power_states[OMAP3_STATE_C4].flags = CPUIDLE_FLAG_TIME_VALID | + CPUIDLE_FLAG_CHECK_BM; + + /* C5 . MPU CSWR + Core CSWR*/ + omap3_power_states[OMAP3_STATE_C5].valid = 1; + omap3_power_states[OMAP3_STATE_C5].type = OMAP3_STATE_C5; + omap3_power_states[OMAP3_STATE_C5].sleep_latency = 2500; + omap3_power_states[OMAP3_STATE_C5].wakeup_latency = 7500; + omap3_power_states[OMAP3_STATE_C5].threshold = 12000; + omap3_power_states[OMAP3_STATE_C5].mpu_state = PWRDM_POWER_RET; + omap3_power_states[OMAP3_STATE_C5].core_state = PWRDM_POWER_RET; + omap3_power_states[OMAP3_STATE_C5].flags = CPUIDLE_FLAG_TIME_VALID | + CPUIDLE_FLAG_CHECK_BM; + + /* C6 . MPU OFF + Core CSWR */ + omap3_power_states[OMAP3_STATE_C6].valid = 1; + omap3_power_states[OMAP3_STATE_C6].type = OMAP3_STATE_C6; + omap3_power_states[OMAP3_STATE_C6].sleep_latency = 3000; + omap3_power_states[OMAP3_STATE_C6].wakeup_latency = 8500; + omap3_power_states[OMAP3_STATE_C6].threshold = 15000; + omap3_power_states[OMAP3_STATE_C6].mpu_state = PWRDM_POWER_OFF; + omap3_power_states[OMAP3_STATE_C6].core_state = PWRDM_POWER_RET; + omap3_power_states[OMAP3_STATE_C6].flags = CPUIDLE_FLAG_TIME_VALID | + CPUIDLE_FLAG_CHECK_BM; + + /* C7 . MPU OFF + Core OFF */ + omap3_power_states[OMAP3_STATE_C7].valid = 1; + omap3_power_states[OMAP3_STATE_C7].type = OMAP3_STATE_C7; + omap3_power_states[OMAP3_STATE_C7].sleep_latency = 10000; + omap3_power_states[OMAP3_STATE_C7].wakeup_latency = 30000; + omap3_power_states[OMAP3_STATE_C7].threshold = 300000; + omap3_power_states[OMAP3_STATE_C7].mpu_state = PWRDM_POWER_OFF; + omap3_power_states[OMAP3_STATE_C7].core_state = PWRDM_POWER_OFF; + omap3_power_states[OMAP3_STATE_C7].flags = CPUIDLE_FLAG_TIME_VALID | + CPUIDLE_FLAG_CHECK_BM; +} + +struct cpuidle_driver omap3_idle_driver = { + .name = "omap3_idle", + .owner = THIS_MODULE, +}; + +/** + * omap3_idle_init - Init routine for OMAP3 idle + * + * Registers the OMAP3 specific cpuidle driver with the cpuidle + * framework with the valid set of states. + */ +int __init omap3_idle_init(void) +{ + int i, count = 0; + struct omap3_processor_cx *cx; + struct cpuidle_state *state; + struct cpuidle_device *dev; + + mpu_pd = pwrdm_lookup("mpu_pwrdm"); + core_pd = pwrdm_lookup("core_pwrdm"); + + omap_init_power_states(); + cpuidle_register_driver(&omap3_idle_driver); + + dev = &per_cpu(omap3_idle_dev, smp_processor_id()); + + for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) { + cx = &omap3_power_states[i]; + state = &dev->states[count]; + + if (!cx->valid) + continue; + cpuidle_set_statedata(state, cx); + state->exit_latency = cx->sleep_latency + cx->wakeup_latency; + state->target_residency = cx->threshold; + state->flags = cx->flags; + state->enter = (state->flags & CPUIDLE_FLAG_CHECK_BM) ? + omap3_enter_idle_bm : omap3_enter_idle; + if (cx->type == OMAP3_STATE_C1) + dev->safe_state = state; + sprintf(state->name, "C%d", count+1); + count++; + } + + if (!count) + return -EINVAL; + dev->state_count = count; + + if (cpuidle_register_device(dev)) { + printk(KERN_ERR "%s: CPUidle register device failed\n", + __func__); + return -EIO; + } + + return 0; +} +#else +int __init omap3_idle_init(void) +{ + return 0; +} +#endif /* CONFIG_CPU_IDLE */ diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index faf7a1e0c525..7d4513b619f2 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -20,12 +20,12 @@ #include <asm/mach-types.h> #include <asm/mach/map.h> -#include <mach/control.h> -#include <mach/tc.h> -#include <mach/board.h> -#include <mach/mux.h> +#include <plat/control.h> +#include <plat/tc.h> +#include <plat/board.h> +#include <plat/mux.h> #include <mach/gpio.h> -#include <mach/mmc.h> +#include <plat/mmc.h> #if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE) @@ -250,7 +250,7 @@ static inline void omap_init_sti(void) {} #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE) -#include <mach/mcspi.h> +#include <plat/mcspi.h> #define OMAP2_MCSPI1_BASE 0x48098000 #define OMAP2_MCSPI2_BASE 0x4809a000 diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 54fec53a48e7..7bb69220adfa 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -17,9 +17,9 @@ #include <asm/mach/flash.h> -#include <mach/onenand.h> -#include <mach/board.h> -#include <mach/gpmc.h> +#include <plat/onenand.h> +#include <plat/board.h> +#include <plat/gpmc.h> static struct omap_onenand_platform_data *gpmc_onenand_data; diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c index df99d31d8b64..6083e21b3be6 100644 --- a/arch/arm/mach-omap2/gpmc-smc91x.c +++ b/arch/arm/mach-omap2/gpmc-smc91x.c @@ -17,9 +17,9 @@ #include <linux/io.h> #include <linux/smc91x.h> -#include <mach/board.h> -#include <mach/gpmc.h> -#include <mach/gpmc-smc91x.h> +#include <plat/board.h> +#include <plat/gpmc.h> +#include <plat/gpmc-smc91x.h> static struct omap_smc91x_platform_data *gpmc_cfg; diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index f3c992e29651..e86f5ca180ea 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -24,9 +24,9 @@ #include <linux/module.h> #include <asm/mach-types.h> -#include <mach/gpmc.h> +#include <plat/gpmc.h> -#include <mach/sdrc.h> +#include <plat/sdrc.h> /* GPMC register offsets */ #define GPMC_REVISION 0x00 @@ -62,6 +62,33 @@ #define ENABLE_PREFETCH (0x1 << 7) #define DMA_MPU_MODE 2 +/* Structure to save gpmc cs context */ +struct gpmc_cs_config { + u32 config1; + u32 config2; + u32 config3; + u32 config4; + u32 config5; + u32 config6; + u32 config7; + int is_valid; +}; + +/* + * Structure to save/restore gpmc context + * to support core off on OMAP3 + */ +struct omap3_gpmc_regs { + u32 sysconfig; + u32 irqenable; + u32 timeout_ctrl; + u32 config; + u32 prefetch_config1; + u32 prefetch_config2; + u32 prefetch_control; + struct gpmc_cs_config cs_context[GPMC_CS_NUM]; +}; + static struct resource gpmc_mem_root; static struct resource gpmc_cs_mem[GPMC_CS_NUM]; static DEFINE_SPINLOCK(gpmc_mem_lock); @@ -261,7 +288,7 @@ static void gpmc_cs_enable_mem(int cs, u32 base, u32 size) l = (base >> GPMC_CHUNK_SHIFT) & 0x3f; l &= ~(0x0f << 8); l |= ((mask >> GPMC_CHUNK_SHIFT) & 0x0f) << 8; - l |= 1 << 6; /* CSVALID */ + l |= GPMC_CONFIG7_CSVALID; gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l); } @@ -270,7 +297,7 @@ static void gpmc_cs_disable_mem(int cs) u32 l; l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); - l &= ~(1 << 6); /* CSVALID */ + l &= ~GPMC_CONFIG7_CSVALID; gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l); } @@ -290,7 +317,7 @@ static int gpmc_cs_mem_enabled(int cs) u32 l; l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); - return l & (1 << 6); + return l & GPMC_CONFIG7_CSVALID; } int gpmc_cs_set_reserved(int cs, int reserved) @@ -516,3 +543,68 @@ void __init gpmc_init(void) gpmc_write_reg(GPMC_SYSCONFIG, l); gpmc_mem_init(); } + +#ifdef CONFIG_ARCH_OMAP3 +static struct omap3_gpmc_regs gpmc_context; + +void omap3_gpmc_save_context() +{ + int i; + gpmc_context.sysconfig = gpmc_read_reg(GPMC_SYSCONFIG); + gpmc_context.irqenable = gpmc_read_reg(GPMC_IRQENABLE); + gpmc_context.timeout_ctrl = gpmc_read_reg(GPMC_TIMEOUT_CONTROL); + gpmc_context.config = gpmc_read_reg(GPMC_CONFIG); + gpmc_context.prefetch_config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1); + gpmc_context.prefetch_config2 = gpmc_read_reg(GPMC_PREFETCH_CONFIG2); + gpmc_context.prefetch_control = gpmc_read_reg(GPMC_PREFETCH_CONTROL); + for (i = 0; i < GPMC_CS_NUM; i++) { + gpmc_context.cs_context[i].is_valid = gpmc_cs_mem_enabled(i); + if (gpmc_context.cs_context[i].is_valid) { + gpmc_context.cs_context[i].config1 = + gpmc_cs_read_reg(i, GPMC_CS_CONFIG1); + gpmc_context.cs_context[i].config2 = + gpmc_cs_read_reg(i, GPMC_CS_CONFIG2); + gpmc_context.cs_context[i].config3 = + gpmc_cs_read_reg(i, GPMC_CS_CONFIG3); + gpmc_context.cs_context[i].config4 = + gpmc_cs_read_reg(i, GPMC_CS_CONFIG4); + gpmc_context.cs_context[i].config5 = + gpmc_cs_read_reg(i, GPMC_CS_CONFIG5); + gpmc_context.cs_context[i].config6 = + gpmc_cs_read_reg(i, GPMC_CS_CONFIG6); + gpmc_context.cs_context[i].config7 = + gpmc_cs_read_reg(i, GPMC_CS_CONFIG7); + } + } +} + +void omap3_gpmc_restore_context() +{ + int i; + gpmc_write_reg(GPMC_SYSCONFIG, gpmc_context.sysconfig); + gpmc_write_reg(GPMC_IRQENABLE, gpmc_context.irqenable); + gpmc_write_reg(GPMC_TIMEOUT_CONTROL, gpmc_context.timeout_ctrl); + gpmc_write_reg(GPMC_CONFIG, gpmc_context.config); + gpmc_write_reg(GPMC_PREFETCH_CONFIG1, gpmc_context.prefetch_config1); + gpmc_write_reg(GPMC_PREFETCH_CONFIG2, gpmc_context.prefetch_config2); + gpmc_write_reg(GPMC_PREFETCH_CONTROL, gpmc_context.prefetch_control); + for (i = 0; i < GPMC_CS_NUM; i++) { + if (gpmc_context.cs_context[i].is_valid) { + gpmc_cs_write_reg(i, GPMC_CS_CONFIG1, + gpmc_context.cs_context[i].config1); + gpmc_cs_write_reg(i, GPMC_CS_CONFIG2, + gpmc_context.cs_context[i].config2); + gpmc_cs_write_reg(i, GPMC_CS_CONFIG3, + gpmc_context.cs_context[i].config3); + gpmc_cs_write_reg(i, GPMC_CS_CONFIG4, + gpmc_context.cs_context[i].config4); + gpmc_cs_write_reg(i, GPMC_CS_CONFIG5, + gpmc_context.cs_context[i].config5); + gpmc_cs_write_reg(i, GPMC_CS_CONFIG6, + gpmc_context.cs_context[i].config6); + gpmc_cs_write_reg(i, GPMC_CS_CONFIG7, + gpmc_context.cs_context[i].config7); + } + } +} +#endif /* CONFIG_ARCH_OMAP3 */ diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index a98201cc265c..d28e6fec7e47 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -21,9 +21,9 @@ #include <asm/cputype.h> -#include <mach/common.h> -#include <mach/control.h> -#include <mach/cpu.h> +#include <plat/common.h> +#include <plat/control.h> +#include <plat/cpu.h> static struct omap_chip_id omap_chip; static unsigned int omap_revision; diff --git a/arch/arm/mach-omap2/include/mach/clkdev.h b/arch/arm/mach-omap2/include/mach/clkdev.h new file mode 100644 index 000000000000..53b027441c56 --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/clkdev.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap2/include/mach/clkdev.h + */ + +#include <plat/clkdev.h> diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S index ac24050e3416..e9f255df9163 100644 --- a/arch/arm/plat-omap/include/mach/debug-macro.S +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S @@ -1,4 +1,4 @@ -/* arch/arm/plat-omap/include/mach/debug-macro.S +/* arch/arm/mach-omap2/include/mach/debug-macro.S * * Debugging macro include header * @@ -14,20 +14,9 @@ .macro addruart,rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? -#ifdef CONFIG_ARCH_OMAP1 - moveq \rx, #0xff000000 @ physical base address - movne \rx, #0xfe000000 @ virtual base - orr \rx, \rx, #0x00fb0000 -#ifdef CONFIG_OMAP_LL_DEBUG_UART3 - orr \rx, \rx, #0x00009000 @ UART 3 -#endif -#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3) - orr \rx, \rx, #0x00000800 @ UART 2 & 3 -#endif - -#elif CONFIG_ARCH_OMAP2 +#ifdef CONFIG_ARCH_OMAP2 moveq \rx, #0x48000000 @ physical base address - movne \rx, #0xd8000000 @ virtual base + movne \rx, #0xfa000000 @ virtual base orr \rx, \rx, #0x0006a000 #ifdef CONFIG_OMAP_LL_DEBUG_UART2 add \rx, \rx, #0x00002000 @ UART 2 @@ -38,7 +27,7 @@ #elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) moveq \rx, #0x48000000 @ physical base address - movne \rx, #0xd8000000 @ virtual base + movne \rx, #0xfa000000 @ virtual base orr \rx, \rx, #0x0006a000 #ifdef CONFIG_OMAP_LL_DEBUG_UART2 add \rx, \rx, #0x00002000 @ UART 2 diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S index a5592991634d..c7f1720bf282 100644 --- a/arch/arm/plat-omap/include/mach/entry-macro.S +++ b/arch/arm/mach-omap2/include/mach/entry-macro.S @@ -15,65 +15,17 @@ #include <mach/irqs.h> #include <asm/hardware/gic.h> -#if defined(CONFIG_ARCH_OMAP1) - -#if defined(CONFIG_ARCH_OMAP730) && \ - (defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)) -#error "FIXME: OMAP730 doesn't support multiple-OMAP" -#elif defined(CONFIG_ARCH_OMAP730) -#define INT_IH2_IRQ INT_730_IH2_IRQ -#elif defined(CONFIG_ARCH_OMAP15XX) -#define INT_IH2_IRQ INT_1510_IH2_IRQ -#elif defined(CONFIG_ARCH_OMAP16XX) -#define INT_IH2_IRQ INT_1610_IH2_IRQ -#else -#warning "IH2 IRQ defaulted" -#define INT_IH2_IRQ INT_1510_IH2_IRQ -#endif - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE) - ldr \irqnr, [\base, #IRQ_ITR_REG_OFFSET] - ldr \tmp, [\base, #IRQ_MIR_REG_OFFSET] - mov \irqstat, #0xffffffff - bic \tmp, \irqstat, \tmp - tst \irqnr, \tmp - beq 1510f - - ldr \irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET] - cmp \irqnr, #0 - ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET] - cmpeq \irqnr, #INT_IH2_IRQ - ldreq \base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE) - ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET] - addeqs \irqnr, \irqnr, #32 -1510: - .endm - -#endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ - defined(CONFIG_ARCH_OMAP4) - -#include <mach/omap24xx.h> -#include <mach/omap34xx.h> +#include <plat/omap24xx.h> +#include <plat/omap34xx.h> /* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */ #if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430) -#define OMAP2_VA_IC_BASE OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE) +#define OMAP2_VA_IC_BASE OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE) #elif defined(CONFIG_ARCH_OMAP34XX) -#define OMAP2_VA_IC_BASE OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE) +#define OMAP2_VA_IC_BASE OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE) #endif #if defined(CONFIG_ARCH_OMAP4) -#include <mach/omap44xx.h> +#include <plat/omap44xx.h> #endif #define INTCPS_SIR_IRQ_OFFSET 0x0040 /* Active interrupt offset */ #define ACTIVEIRQ_MASK 0x7f /* Active interrupt bits */ @@ -104,6 +56,8 @@ .endm #else +#define OMAP44XX_VA_GIC_CPU_BASE OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE) + /* * The interrupt numbering scheme is defined in the * interrupt controller spec. To wit: @@ -168,5 +122,3 @@ .macro irq_prio_table .endm - -#endif diff --git a/arch/arm/mach-omap2/include/mach/gpio.h b/arch/arm/mach-omap2/include/mach/gpio.h new file mode 100644 index 000000000000..be4d290d57ee --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/gpio.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap2/include/mach/gpio.h + */ + +#include <plat/gpio.h> diff --git a/arch/arm/mach-omap2/include/mach/hardware.h b/arch/arm/mach-omap2/include/mach/hardware.h new file mode 100644 index 000000000000..78edf9d33f71 --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/hardware.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap2/include/mach/hardware.h + */ + +#include <plat/hardware.h> diff --git a/arch/arm/mach-omap2/include/mach/io.h b/arch/arm/mach-omap2/include/mach/io.h new file mode 100644 index 000000000000..fd78f31aa1ad --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/io.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap2/include/mach/io.h + */ + +#include <plat/io.h> diff --git a/arch/arm/mach-omap2/include/mach/irqs.h b/arch/arm/mach-omap2/include/mach/irqs.h new file mode 100644 index 000000000000..44dab7725696 --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/irqs.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap2/include/mach/irqs.h + */ + +#include <plat/irqs.h> diff --git a/arch/arm/mach-omap2/include/mach/memory.h b/arch/arm/mach-omap2/include/mach/memory.h new file mode 100644 index 000000000000..ca6d32a917dd --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/memory.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap2/include/mach/memory.h + */ + +#include <plat/memory.h> diff --git a/arch/arm/mach-omap2/include/mach/smp.h b/arch/arm/mach-omap2/include/mach/smp.h new file mode 100644 index 000000000000..323675f21b69 --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/smp.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap2/include/mach/smp.h + */ + +#include <plat/smp.h> diff --git a/arch/arm/mach-omap2/include/mach/system.h b/arch/arm/mach-omap2/include/mach/system.h new file mode 100644 index 000000000000..d488721ab90b --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/system.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap2/include/mach/system.h + */ + +#include <plat/system.h> diff --git a/arch/arm/mach-omap2/include/mach/timex.h b/arch/arm/mach-omap2/include/mach/timex.h new file mode 100644 index 000000000000..de9f8fc40e7c --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/timex.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap2/include/mach/timex.h + */ + +#include <plat/timex.h> diff --git a/arch/arm/mach-omap2/include/mach/uncompress.h b/arch/arm/mach-omap2/include/mach/uncompress.h new file mode 100644 index 000000000000..78e0557bfd4e --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/uncompress.h @@ -0,0 +1,5 @@ +/* + * arch/arm/mach-omap2/include/mach/uncompress.h + */ + +#include <plat/uncompress.h> diff --git a/arch/arm/plat-omap/include/mach/vmalloc.h b/arch/arm/mach-omap2/include/mach/vmalloc.h index b97dfafeebda..9ce9b6e8ad23 100644 --- a/arch/arm/plat-omap/include/mach/vmalloc.h +++ b/arch/arm/mach-omap2/include/mach/vmalloc.h @@ -17,5 +17,4 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END (PAGE_OFFSET + 0x18000000) - +#define VMALLOC_END (PAGE_OFFSET + 0x38000000) diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 56be87d13edb..59d28b2fd8c5 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -27,24 +27,24 @@ #include <asm/mach/map.h> -#include <mach/mux.h> -#include <mach/omapfb.h> -#include <mach/sram.h> -#include <mach/sdrc.h> -#include <mach/gpmc.h> -#include <mach/serial.h> +#include <plat/mux.h> +#include <plat/omapfb.h> +#include <plat/sram.h> +#include <plat/sdrc.h> +#include <plat/gpmc.h> +#include <plat/serial.h> #ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdev is ready */ #include "clock.h" -#include <mach/omap-pm.h> -#include <mach/powerdomain.h> +#include <plat/omap-pm.h> +#include <plat/powerdomain.h> #include "powerdomains.h" -#include <mach/clockdomain.h> +#include <plat/clockdomain.h> #include "clockdomains.h" #endif -#include <mach/omap_hwmod.h> +#include <plat/omap_hwmod.h> #include "omap_hwmod_2420.h" #include "omap_hwmod_2430.h" #include "omap_hwmod_34xx.h" @@ -203,6 +203,24 @@ static struct map_desc omap44xx_io_desc[] __initdata = { .type = MT_DEVICE, }, { + .virtual = OMAP44XX_EMIF1_VIRT, + .pfn = __phys_to_pfn(OMAP44XX_EMIF1_PHYS), + .length = OMAP44XX_EMIF1_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = OMAP44XX_EMIF2_VIRT, + .pfn = __phys_to_pfn(OMAP44XX_EMIF2_PHYS), + .length = OMAP44XX_EMIF2_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = OMAP44XX_DMM_VIRT, + .pfn = __phys_to_pfn(OMAP44XX_DMM_PHYS), + .length = OMAP44XX_DMM_SIZE, + .type = MT_DEVICE, + }, + { .virtual = L4_PER_44XX_VIRT, .pfn = __phys_to_pfn(L4_PER_44XX_PHYS), .length = L4_PER_44XX_SIZE, diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c index 4a0e1cd5c1f4..6f4b7cc8f4d1 100644 --- a/arch/arm/mach-omap2/iommu2.c +++ b/arch/arm/mach-omap2/iommu2.c @@ -17,7 +17,7 @@ #include <linux/module.h> #include <linux/stringify.h> -#include <mach/iommu.h> +#include <plat/iommu.h> /* * omap2 architecture specific register bit definitions diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index b82863887f10..e9bc782fa414 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -25,6 +25,10 @@ #define INTC_SYSSTATUS 0x0014 #define INTC_SIR 0x0040 #define INTC_CONTROL 0x0048 +#define INTC_PROTECTION 0x004C +#define INTC_IDLE 0x0050 +#define INTC_THRESHOLD 0x0068 +#define INTC_MIR0 0x0084 #define INTC_MIR_CLEAR0 0x0088 #define INTC_MIR_SET0 0x008c #define INTC_PENDING_IRQ0 0x0098 @@ -48,6 +52,18 @@ static struct omap_irq_bank { }, }; +/* Structure to save interrupt controller context */ +struct omap3_intc_regs { + u32 sysconfig; + u32 protection; + u32 idle; + u32 threshold; + u32 ilr[INTCPS_NR_IRQS]; + u32 mir[INTCPS_NR_MIR_REGS]; +}; + +static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)]; + /* INTC bank register get/set */ static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg) @@ -178,12 +194,20 @@ void __init omap_init_irq(void) int i; for (i = 0; i < ARRAY_SIZE(irq_banks); i++) { + unsigned long base; struct omap_irq_bank *bank = irq_banks + i; if (cpu_is_omap24xx()) - bank->base_reg = OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE); + base = OMAP24XX_IC_BASE; else if (cpu_is_omap34xx()) - bank->base_reg = OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE); + base = OMAP34XX_IC_BASE; + + /* Static mapping, never released */ + bank->base_reg = ioremap(base, SZ_4K); + if (!bank->base_reg) { + printk(KERN_ERR "Could not ioremap irq bank%i\n", i); + continue; + } omap_irq_bank_init_one(bank); @@ -201,3 +225,53 @@ void __init omap_init_irq(void) } } +#ifdef CONFIG_ARCH_OMAP3 +void omap_intc_save_context(void) +{ + int ind = 0, i = 0; + for (ind = 0; ind < ARRAY_SIZE(irq_banks); ind++) { + struct omap_irq_bank *bank = irq_banks + ind; + intc_context[ind].sysconfig = + intc_bank_read_reg(bank, INTC_SYSCONFIG); + intc_context[ind].protection = + intc_bank_read_reg(bank, INTC_PROTECTION); + intc_context[ind].idle = + intc_bank_read_reg(bank, INTC_IDLE); + intc_context[ind].threshold = + intc_bank_read_reg(bank, INTC_THRESHOLD); + for (i = 0; i < INTCPS_NR_IRQS; i++) + intc_context[ind].ilr[i] = + intc_bank_read_reg(bank, (0x100 + 0x4*i)); + for (i = 0; i < INTCPS_NR_MIR_REGS; i++) + intc_context[ind].mir[i] = + intc_bank_read_reg(&irq_banks[0], INTC_MIR0 + + (0x20 * i)); + } +} + +void omap_intc_restore_context(void) +{ + int ind = 0, i = 0; + + for (ind = 0; ind < ARRAY_SIZE(irq_banks); ind++) { + struct omap_irq_bank *bank = irq_banks + ind; + intc_bank_write_reg(intc_context[ind].sysconfig, + bank, INTC_SYSCONFIG); + intc_bank_write_reg(intc_context[ind].sysconfig, + bank, INTC_SYSCONFIG); + intc_bank_write_reg(intc_context[ind].protection, + bank, INTC_PROTECTION); + intc_bank_write_reg(intc_context[ind].idle, + bank, INTC_IDLE); + intc_bank_write_reg(intc_context[ind].threshold, + bank, INTC_THRESHOLD); + for (i = 0; i < INTCPS_NR_IRQS; i++) + intc_bank_write_reg(intc_context[ind].ilr[i], + bank, (0x100 + 0x4*i)); + for (i = 0; i < INTCPS_NR_MIR_REGS; i++) + intc_bank_write_reg(intc_context[ind].mir[i], + &irq_banks[0], INTC_MIR0 + (0x20 * i)); + } + /* MIRs are saved and restore with other PRCM registers */ +} +#endif /* CONFIG_ARCH_OMAP3 */ diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index ef57b38a56a4..5ba3aa69465e 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -15,7 +15,7 @@ #include <linux/err.h> #include <linux/platform_device.h> #include <linux/io.h> -#include <mach/mailbox.h> +#include <plat/mailbox.h> #include <mach/irqs.h> #define MAILBOX_REVISION 0x000 diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index a846aa1ebb4d..baa451733850 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -18,10 +18,10 @@ #include <linux/platform_device.h> #include <mach/irqs.h> -#include <mach/dma.h> -#include <mach/mux.h> -#include <mach/cpu.h> -#include <mach/mcbsp.h> +#include <plat/dma.h> +#include <plat/mux.h> +#include <plat/cpu.h> +#include <plat/mcbsp.h> static void omap2_mcbsp2_mux_setup(void) { diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c index c9c59a2db4e2..340391468909 100644 --- a/arch/arm/mach-omap2/mmc-twl4030.c +++ b/arch/arm/mach-omap2/mmc-twl4030.c @@ -20,9 +20,9 @@ #include <linux/regulator/consumer.h> #include <mach/hardware.h> -#include <mach/control.h> -#include <mach/mmc.h> -#include <mach/board.h> +#include <plat/control.h> +#include <plat/mmc.h> +#include <plat/board.h> #include "mmc-twl4030.h" diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index b5fac32aae70..32c953e608db 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -30,8 +30,8 @@ #include <asm/system.h> -#include <mach/control.h> -#include <mach/mux.h> +#include <plat/control.h> +#include <plat/mux.h> #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 48ee295db275..4890bcf4dadd 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -24,13 +24,14 @@ #include <asm/localtimer.h> #include <asm/smp_scu.h> #include <mach/hardware.h> +#include <plat/common.h> /* Registers used for communicating startup information */ -#define OMAP4_AUXCOREBOOT_REG0 (OMAP44XX_VA_WKUPGEN_BASE + 0x800) -#define OMAP4_AUXCOREBOOT_REG1 (OMAP44XX_VA_WKUPGEN_BASE + 0x804) +static void __iomem *omap4_auxcoreboot_reg0; +static void __iomem *omap4_auxcoreboot_reg1; /* SCU base address */ -static void __iomem *scu_base = OMAP44XX_VA_SCU_BASE; +static void __iomem *scu_base; /* * Use SCU config register to count number of cores @@ -53,8 +54,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu) * core (e.g. timer irq), then they will not have been enabled * for us: do so */ - - gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)); + gic_cpu_init(0, gic_cpu_base_addr); /* * Synchronise with the boot thread. @@ -79,7 +79,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) * the AuxCoreBoot1 register is updated with cpu state * A barrier is added to ensure that write buffer is drained */ - __raw_writel(cpu, OMAP4_AUXCOREBOOT_REG1); + __raw_writel(cpu, omap4_auxcoreboot_reg1); smp_wmb(); timeout = jiffies + (1 * HZ); @@ -104,7 +104,7 @@ static void __init wakeup_secondary(void) * A barrier is added to ensure that write buffer is drained */ __raw_writel(virt_to_phys(omap_secondary_startup), \ - OMAP4_AUXCOREBOOT_REG0); + omap4_auxcoreboot_reg0); smp_wmb(); /* @@ -120,7 +120,13 @@ static void __init wakeup_secondary(void) */ void __init smp_init_cpus(void) { - unsigned int i, ncores = get_core_count(); + unsigned int i, ncores; + + /* Never released */ + scu_base = ioremap(OMAP44XX_SCU_BASE, SZ_256); + BUG_ON(!scu_base); + + ncores = get_core_count(); for (i = 0; i < ncores; i++) set_cpu_possible(i, true); @@ -130,6 +136,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) { unsigned int ncores = get_core_count(); unsigned int cpu = smp_processor_id(); + void __iomem *omap4_wkupgen_base; int i; /* sanity check */ @@ -161,6 +168,12 @@ void __init smp_prepare_cpus(unsigned int max_cpus) for (i = 0; i < max_cpus; i++) set_cpu_present(i, true); + /* Never released */ + omap4_wkupgen_base = ioremap(OMAP44XX_WKUPGEN_BASE, SZ_4K); + BUG_ON(!omap4_wkupgen_base); + omap4_auxcoreboot_reg0 = omap4_wkupgen_base + 0x800; + omap4_auxcoreboot_reg1 = omap4_wkupgen_base + 0x804; + if (max_cpus > 1) { /* * Enable the local timer or broadcast device for the diff --git a/arch/arm/mach-omap2/omap3-iommu.c b/arch/arm/mach-omap2/omap3-iommu.c index 194189c746c2..6a9bf4f59d8a 100644 --- a/arch/arm/mach-omap2/omap3-iommu.c +++ b/arch/arm/mach-omap2/omap3-iommu.c @@ -12,7 +12,7 @@ #include <linux/platform_device.h> -#include <mach/iommu.h> +#include <plat/iommu.h> #define OMAP3_MMU1_BASE 0x480bd400 #define OMAP3_MMU2_BASE 0x5d000000 diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index d2e0f1c95961..633b216a8b26 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -45,11 +45,11 @@ #include <linux/mutex.h> #include <linux/bootmem.h> -#include <mach/cpu.h> -#include <mach/clockdomain.h> -#include <mach/powerdomain.h> -#include <mach/clock.h> -#include <mach/omap_hwmod.h> +#include <plat/cpu.h> +#include <plat/clockdomain.h> +#include <plat/powerdomain.h> +#include <plat/clock.h> +#include <plat/omap_hwmod.h> #include "cm.h" @@ -496,6 +496,7 @@ static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index) struct omap_hwmod_addr_space *mem; int i; int found = 0; + void __iomem *va_start; if (!oh || oh->slaves_cnt == 0) return NULL; @@ -509,16 +510,20 @@ static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index) } } - /* XXX use ioremap() instead? */ - - if (found) + if (found) { + va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start); + if (!va_start) { + pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name); + return NULL; + } pr_debug("omap_hwmod: %s: MPU register target at va %p\n", - oh->name, OMAP2_IO_ADDRESS(mem->pa_start)); - else + oh->name, va_start); + } else { pr_debug("omap_hwmod: %s: no MPU register target found\n", oh->name); + } - return (found) ? OMAP2_IO_ADDRESS(mem->pa_start) : NULL; + return (found) ? va_start : NULL; } /** @@ -1148,6 +1153,7 @@ int omap_hwmod_unregister(struct omap_hwmod *oh) pr_debug("omap_hwmod: %s: unregistering\n", oh->name); mutex_lock(&omap_hwmod_mutex); + iounmap(oh->_rt_va); list_del(&oh->node); mutex_unlock(&omap_hwmod_mutex); diff --git a/arch/arm/mach-omap2/omap_hwmod_2420.h b/arch/arm/mach-omap2/omap_hwmod_2420.h index 767e4965ac4e..a9ca1b99a301 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420.h +++ b/arch/arm/mach-omap2/omap_hwmod_2420.h @@ -16,10 +16,10 @@ #ifdef CONFIG_ARCH_OMAP2420 -#include <mach/omap_hwmod.h> +#include <plat/omap_hwmod.h> #include <mach/irqs.h> -#include <mach/cpu.h> -#include <mach/dma.h> +#include <plat/cpu.h> +#include <plat/dma.h> #include "prm-regbits-24xx.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_2430.h b/arch/arm/mach-omap2/omap_hwmod_2430.h index a412be6420ec..59a208bea6c2 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430.h +++ b/arch/arm/mach-omap2/omap_hwmod_2430.h @@ -16,10 +16,10 @@ #ifdef CONFIG_ARCH_OMAP2430 -#include <mach/omap_hwmod.h> +#include <plat/omap_hwmod.h> #include <mach/irqs.h> -#include <mach/cpu.h> -#include <mach/dma.h> +#include <plat/cpu.h> +#include <plat/dma.h> #include "prm-regbits-24xx.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_34xx.h b/arch/arm/mach-omap2/omap_hwmod_34xx.h index 1e069f831575..b6076b9c364e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_34xx.h +++ b/arch/arm/mach-omap2/omap_hwmod_34xx.h @@ -14,10 +14,10 @@ #ifdef CONFIG_ARCH_OMAP34XX -#include <mach/omap_hwmod.h> +#include <plat/omap_hwmod.h> #include <mach/irqs.h> -#include <mach/cpu.h> -#include <mach/dma.h> +#include <plat/cpu.h> +#include <plat/dma.h> #include "prm-regbits-34xx.h" diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 2fc4d6abbd0a..8baa30d2acfb 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -26,10 +26,10 @@ #include <linux/io.h> #include <linux/module.h> -#include <mach/clock.h> -#include <mach/board.h> -#include <mach/powerdomain.h> -#include <mach/clockdomain.h> +#include <plat/clock.h> +#include <plat/board.h> +#include <plat/powerdomain.h> +#include <plat/clockdomain.h> #include "prm.h" #include "cm.h" @@ -51,7 +51,8 @@ int omap2_pm_debug; regs[reg_count++].val = __raw_readl(reg) #define DUMP_INTC_REG(reg, off) \ regs[reg_count].name = #reg; \ - regs[reg_count++].val = __raw_readl(OMAP2_IO_ADDRESS(0x480fe000 + (off))) + regs[reg_count++].val = \ + __raw_readl(OMAP2_L4_IO_ADDRESS(0x480fe000 + (off))) static int __init pm_dbg_init(void); @@ -526,6 +527,29 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *dir) return 0; } +static int option_get(void *data, u64 *val) +{ + u32 *option = data; + + *val = *option; + + return 0; +} + +static int option_set(void *data, u64 val) +{ + u32 *option = data; + + *option = val; + + if (option == &enable_off_mode) + omap3_pm_off_mode_enable(val); + + return 0; +} + +DEFINE_SIMPLE_ATTRIBUTE(pm_dbg_option_fops, option_get, option_set, "%llu\n"); + static int __init pm_dbg_init(void) { int i; @@ -568,6 +592,12 @@ static int __init pm_dbg_init(void) } + (void) debugfs_create_file("enable_off_mode", S_IRUGO | S_IWUGO, d, + &enable_off_mode, &pm_dbg_option_fops); + (void) debugfs_create_file("sleep_while_idle", S_IRUGO | S_IWUGO, d, + &sleep_while_idle, &pm_dbg_option_fops); + (void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUGO, d, + &wakeup_timer_seconds, &pm_dbg_option_fops); pm_dbg_init_done = 1; return 0; diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 8400f5768923..0bf345db7147 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -11,11 +11,24 @@ #ifndef __ARCH_ARM_MACH_OMAP2_PM_H #define __ARCH_ARM_MACH_OMAP2_PM_H -#include <mach/powerdomain.h> +#include <plat/powerdomain.h> + +extern u32 enable_off_mode; +extern u32 sleep_while_idle; + +extern void *omap3_secure_ram_storage; +extern void omap3_pm_off_mode_enable(int); +extern void omap_sram_idle(void); +extern int omap3_can_sleep(void); +extern int set_pwrdm_state(struct powerdomain *pwrdm, u32 state); +extern int omap3_idle_init(void); extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm); extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state); +extern u32 wakeup_timer_seconds; +extern struct omap_dm_timer *gptimer_wakeup; + #ifdef CONFIG_PM_DEBUG extern void omap2_pm_dump(int mode, int resume, unsigned int us); extern int omap2_pm_debug; @@ -36,6 +49,7 @@ extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl, void __iomem *sdrc_power); extern void omap34xx_cpu_suspend(u32 *addr, int save_state); extern void save_secure_ram_context(u32 *addr); +extern void omap3_save_scratchpad_contents(void); extern unsigned int omap24xx_idle_loop_suspend_sz; extern unsigned int omap34xx_suspend_sz; diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index bff5c4e89742..cba05b9f041f 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -36,12 +36,12 @@ #include <asm/mach-types.h> #include <mach/irqs.h> -#include <mach/clock.h> -#include <mach/sram.h> -#include <mach/control.h> -#include <mach/mux.h> -#include <mach/dma.h> -#include <mach/board.h> +#include <plat/clock.h> +#include <plat/sram.h> +#include <plat/control.h> +#include <plat/mux.h> +#include <plat/dma.h> +#include <plat/board.h> #include "prm.h" #include "prm-regbits-24xx.h" @@ -50,8 +50,8 @@ #include "sdrc.h" #include "pm.h" -#include <mach/powerdomain.h> -#include <mach/clockdomain.h> +#include <plat/powerdomain.h> +#include <plat/clockdomain.h> static void (*omap2_sram_idle)(void); static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl, diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 89463190923a..81ed252a0f8a 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -5,6 +5,9 @@ * Tony Lindgren <tony@atomide.com> * Jouni Hogander * + * Copyright (C) 2007 Texas Instruments, Inc. + * Rajendra Nayak <rnayak@ti.com> + * * Copyright (C) 2005 Texas Instruments, Inc. * Richard Woodruff <r-woodruff2@ti.com> * @@ -22,12 +25,20 @@ #include <linux/list.h> #include <linux/err.h> #include <linux/gpio.h> +#include <linux/clk.h> + +#include <plat/sram.h> +#include <plat/clockdomain.h> +#include <plat/powerdomain.h> +#include <plat/control.h> +#include <plat/serial.h> +#include <plat/sdrc.h> +#include <plat/prcm.h> +#include <plat/gpmc.h> +#include <plat/dma.h> +#include <plat/dmtimer.h> -#include <mach/sram.h> -#include <mach/clockdomain.h> -#include <mach/powerdomain.h> -#include <mach/control.h> -#include <mach/serial.h> +#include <asm/tlbflush.h> #include "cm.h" #include "cm-regbits-34xx.h" @@ -35,6 +46,16 @@ #include "prm.h" #include "pm.h" +#include "sdrc.h" + +/* Scratchpad offsets */ +#define OMAP343X_TABLE_ADDRESS_OFFSET 0x31 +#define OMAP343X_TABLE_VALUE_OFFSET 0x30 +#define OMAP343X_CONTROL_REG_VALUE_OFFSET 0x32 + +u32 enable_off_mode; +u32 sleep_while_idle; +u32 wakeup_timer_seconds; struct power_state { struct powerdomain *pwrdm; @@ -49,7 +70,112 @@ static LIST_HEAD(pwrst_list); static void (*_omap_sram_idle)(u32 *addr, int save_state); -static struct powerdomain *mpu_pwrdm; +static int (*_omap_save_secure_sram)(u32 *addr); + +static struct powerdomain *mpu_pwrdm, *neon_pwrdm; +static struct powerdomain *core_pwrdm, *per_pwrdm; +static struct powerdomain *cam_pwrdm; + +static inline void omap3_per_save_context(void) +{ + omap_gpio_save_context(); +} + +static inline void omap3_per_restore_context(void) +{ + omap_gpio_restore_context(); +} + +static void omap3_enable_io_chain(void) +{ + int timeout = 0; + + if (omap_rev() >= OMAP3430_REV_ES3_1) { + prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN, WKUP_MOD, PM_WKEN); + /* Do a readback to assure write has been done */ + prm_read_mod_reg(WKUP_MOD, PM_WKEN); + + while (!(prm_read_mod_reg(WKUP_MOD, PM_WKST) & + OMAP3430_ST_IO_CHAIN)) { + timeout++; + if (timeout > 1000) { + printk(KERN_ERR "Wake up daisy chain " + "activation failed.\n"); + return; + } + prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN, + WKUP_MOD, PM_WKST); + } + } +} + +static void omap3_disable_io_chain(void) +{ + if (omap_rev() >= OMAP3430_REV_ES3_1) + prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN, WKUP_MOD, PM_WKEN); +} + +static void omap3_core_save_context(void) +{ + u32 control_padconf_off; + + /* Save the padconf registers */ + control_padconf_off = omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_OFF); + control_padconf_off |= START_PADCONF_SAVE; + omap_ctrl_writel(control_padconf_off, OMAP343X_CONTROL_PADCONF_OFF); + /* wait for the save to complete */ + while (!omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS) + & PADCONF_SAVE_DONE) + ; + /* Save the Interrupt controller context */ + omap_intc_save_context(); + /* Save the GPMC context */ + omap3_gpmc_save_context(); + /* Save the system control module context, padconf already save above*/ + omap3_control_save_context(); + omap_dma_global_context_save(); +} + +static void omap3_core_restore_context(void) +{ + /* Restore the control module context, padconf restored by h/w */ + omap3_control_restore_context(); + /* Restore the GPMC context */ + omap3_gpmc_restore_context(); + /* Restore the interrupt controller context */ + omap_intc_restore_context(); + omap_dma_global_context_restore(); +} + +/* + * FIXME: This function should be called before entering off-mode after + * OMAP3 secure services have been accessed. Currently it is only called + * once during boot sequence, but this works as we are not using secure + * services. + */ +static void omap3_save_secure_ram_context(u32 target_mpu_state) +{ + u32 ret; + + if (omap_type() != OMAP2_DEVICE_TYPE_GP) { + /* + * MPU next state must be set to POWER_ON temporarily, + * otherwise the WFI executed inside the ROM code + * will hang the system. + */ + pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON); + ret = _omap_save_secure_sram((u32 *) + __pa(omap3_secure_ram_storage)); + pwrdm_set_next_pwrst(mpu_pwrdm, target_mpu_state); + /* Following is for error tracking, it should not happen */ + if (ret) { + printk(KERN_ERR "save_secure_sram() returns %08x\n", + ret); + while (1) + ; + } + } +} /* * PRCM Interrupt Handler Helper Function @@ -161,7 +287,36 @@ static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id) return IRQ_HANDLED; } -static void omap_sram_idle(void) +static void restore_control_register(u32 val) +{ + __asm__ __volatile__ ("mcr p15, 0, %0, c1, c0, 0" : : "r" (val)); +} + +/* Function to restore the table entry that was modified for enabling MMU */ +static void restore_table_entry(void) +{ + u32 *scratchpad_address; + u32 previous_value, control_reg_value; + u32 *address; + + scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD); + + /* Get address of entry that was modified */ + address = (u32 *)__raw_readl(scratchpad_address + + OMAP343X_TABLE_ADDRESS_OFFSET); + /* Get the previous value which needs to be restored */ + previous_value = __raw_readl(scratchpad_address + + OMAP343X_TABLE_VALUE_OFFSET); + address = __va(address); + *address = previous_value; + flush_tlb_all(); + control_reg_value = __raw_readl(scratchpad_address + + OMAP343X_CONTROL_REG_VALUE_OFFSET); + /* This will enable caches and prediction */ + restore_control_register(control_reg_value); +} + +void omap_sram_idle(void) { /* Variable to tell what needs to be saved and restored * in omap_sram_idle*/ @@ -169,17 +324,32 @@ static void omap_sram_idle(void) /* save_state = 1 => Only L1 and logic lost */ /* save_state = 2 => Only L2 lost */ /* save_state = 3 => L1, L2 and logic lost */ - int save_state = 0, mpu_next_state; + int save_state = 0; + int mpu_next_state = PWRDM_POWER_ON; + int per_next_state = PWRDM_POWER_ON; + int core_next_state = PWRDM_POWER_ON; + int core_prev_state, per_prev_state; + u32 sdrc_pwr = 0; + int per_state_modified = 0; if (!_omap_sram_idle) return; + pwrdm_clear_all_prev_pwrst(mpu_pwrdm); + pwrdm_clear_all_prev_pwrst(neon_pwrdm); + pwrdm_clear_all_prev_pwrst(core_pwrdm); + pwrdm_clear_all_prev_pwrst(per_pwrdm); + mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm); switch (mpu_next_state) { + case PWRDM_POWER_ON: case PWRDM_POWER_RET: /* No need to save context */ save_state = 0; break; + case PWRDM_POWER_OFF: + save_state = 3; + break; default: /* Invalid state */ printk(KERN_ERR "Invalid mpu state in sram_idle\n"); @@ -187,68 +357,115 @@ static void omap_sram_idle(void) } pwrdm_pre_transition(); - omap2_gpio_prepare_for_retention(); - omap_uart_prepare_idle(0); - omap_uart_prepare_idle(1); - omap_uart_prepare_idle(2); + /* NEON control */ + if (pwrdm_read_pwrst(neon_pwrdm) == PWRDM_POWER_ON) + pwrdm_set_next_pwrst(neon_pwrdm, mpu_next_state); + + /* PER */ + per_next_state = pwrdm_read_next_pwrst(per_pwrdm); + core_next_state = pwrdm_read_next_pwrst(core_pwrdm); + if (per_next_state < PWRDM_POWER_ON) { + omap_uart_prepare_idle(2); + omap2_gpio_prepare_for_retention(); + if (per_next_state == PWRDM_POWER_OFF) { + if (core_next_state == PWRDM_POWER_ON) { + per_next_state = PWRDM_POWER_RET; + pwrdm_set_next_pwrst(per_pwrdm, per_next_state); + per_state_modified = 1; + } else + omap3_per_save_context(); + } + } + + if (pwrdm_read_pwrst(cam_pwrdm) == PWRDM_POWER_ON) + omap2_clkdm_deny_idle(mpu_pwrdm->pwrdm_clkdms[0]); + + /* CORE */ + if (core_next_state < PWRDM_POWER_ON) { + omap_uart_prepare_idle(0); + omap_uart_prepare_idle(1); + if (core_next_state == PWRDM_POWER_OFF) { + omap3_core_save_context(); + omap3_prcm_save_context(); + } + /* Enable IO-PAD and IO-CHAIN wakeups */ + prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN); + omap3_enable_io_chain(); + } + + /* + * On EMU/HS devices ROM code restores a SRDC value + * from scratchpad which has automatic self refresh on timeout + * of AUTO_CNT = 1 enabled. This takes care of errata 1.142. + * Hence store/restore the SDRC_POWER register here. + */ + if (omap_rev() >= OMAP3430_REV_ES3_0 && + omap_type() != OMAP2_DEVICE_TYPE_GP && + core_next_state == PWRDM_POWER_OFF) + sdrc_pwr = sdrc_read_reg(SDRC_POWER); - _omap_sram_idle(NULL, save_state); + /* + * omap3_arm_context is the location where ARM registers + * get saved. The restore path then reads from this + * location and restores them back. + */ + _omap_sram_idle(omap3_arm_context, save_state); cpu_init(); - omap_uart_resume_idle(2); - omap_uart_resume_idle(1); - omap_uart_resume_idle(0); - omap2_gpio_resume_after_retention(); + /* Restore normal SDRC POWER settings */ + if (omap_rev() >= OMAP3430_REV_ES3_0 && + omap_type() != OMAP2_DEVICE_TYPE_GP && + core_next_state == PWRDM_POWER_OFF) + sdrc_write_reg(sdrc_pwr, SDRC_POWER); + + /* Restore table entry modified during MMU restoration */ + if (pwrdm_read_prev_pwrst(mpu_pwrdm) == PWRDM_POWER_OFF) + restore_table_entry(); + + /* CORE */ + if (core_next_state < PWRDM_POWER_ON) { + core_prev_state = pwrdm_read_prev_pwrst(core_pwrdm); + if (core_prev_state == PWRDM_POWER_OFF) { + omap3_core_restore_context(); + omap3_prcm_restore_context(); + omap3_sram_restore_context(); + omap2_sms_restore_context(); + } + omap_uart_resume_idle(0); + omap_uart_resume_idle(1); + if (core_next_state == PWRDM_POWER_OFF) + prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF, + OMAP3430_GR_MOD, + OMAP3_PRM_VOLTCTRL_OFFSET); + } - pwrdm_post_transition(); + /* PER */ + if (per_next_state < PWRDM_POWER_ON) { + per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm); + if (per_prev_state == PWRDM_POWER_OFF) + omap3_per_restore_context(); + omap2_gpio_resume_after_retention(); + omap_uart_resume_idle(2); + if (per_state_modified) + pwrdm_set_next_pwrst(per_pwrdm, PWRDM_POWER_OFF); + } -} + /* Disable IO-PAD and IO-CHAIN wakeup */ + if (core_next_state < PWRDM_POWER_ON) { + prm_clear_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN); + omap3_disable_io_chain(); + } -/* - * Check if functional clocks are enabled before entering - * sleep. This function could be behind CONFIG_PM_DEBUG - * when all drivers are configuring their sysconfig registers - * properly and using their clocks properly. - */ -static int omap3_fclks_active(void) -{ - u32 fck_core1 = 0, fck_core3 = 0, fck_sgx = 0, fck_dss = 0, - fck_cam = 0, fck_per = 0, fck_usbhost = 0; + pwrdm_post_transition(); - fck_core1 = cm_read_mod_reg(CORE_MOD, - CM_FCLKEN1); - if (omap_rev() > OMAP3430_REV_ES1_0) { - fck_core3 = cm_read_mod_reg(CORE_MOD, - OMAP3430ES2_CM_FCLKEN3); - fck_sgx = cm_read_mod_reg(OMAP3430ES2_SGX_MOD, - CM_FCLKEN); - fck_usbhost = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, - CM_FCLKEN); - } else - fck_sgx = cm_read_mod_reg(GFX_MOD, - OMAP3430ES2_CM_FCLKEN3); - fck_dss = cm_read_mod_reg(OMAP3430_DSS_MOD, - CM_FCLKEN); - fck_cam = cm_read_mod_reg(OMAP3430_CAM_MOD, - CM_FCLKEN); - fck_per = cm_read_mod_reg(OMAP3430_PER_MOD, - CM_FCLKEN); - - /* Ignore UART clocks. These are handled by UART core (serial.c) */ - fck_core1 &= ~(OMAP3430_EN_UART1 | OMAP3430_EN_UART2); - fck_per &= ~OMAP3430_EN_UART3; - - if (fck_core1 | fck_core3 | fck_sgx | fck_dss | - fck_cam | fck_per | fck_usbhost) - return 1; - return 0; + omap2_clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]); } -static int omap3_can_sleep(void) +int omap3_can_sleep(void) { - if (!omap_uart_can_sleep()) + if (!sleep_while_idle) return 0; - if (omap3_fclks_active()) + if (!omap_uart_can_sleep()) return 0; return 1; } @@ -256,7 +473,7 @@ static int omap3_can_sleep(void) /* This sets pwrdm state (other than mpu & core. Currently only ON & * RET are supported. Function is assuming that clkdm doesn't have * hw_sup mode enabled. */ -static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state) +int set_pwrdm_state(struct powerdomain *pwrdm, u32 state) { u32 cur_state; int sleep_switch = 0; @@ -306,7 +523,7 @@ static void omap3_pm_idle(void) if (!omap3_can_sleep()) goto out; - if (omap_irq_pending()) + if (omap_irq_pending() || need_resched()) goto out; omap_sram_idle(); @@ -319,6 +536,22 @@ out: #ifdef CONFIG_SUSPEND static suspend_state_t suspend_state; +static void omap2_pm_wakeup_on_timer(u32 seconds) +{ + u32 tick_rate, cycles; + + if (!seconds) + return; + + tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup)); + cycles = tick_rate * seconds; + omap_dm_timer_stop(gptimer_wakeup); + omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles); + + pr_info("PM: Resume timer in %d secs (%d ticks at %d ticks/sec.)\n", + seconds, cycles, tick_rate); +} + static int omap3_pm_prepare(void) { disable_hlt(); @@ -330,6 +563,9 @@ static int omap3_pm_suspend(void) struct power_state *pwrst; int state, ret = 0; + if (wakeup_timer_seconds) + omap2_pm_wakeup_on_timer(wakeup_timer_seconds); + /* Read current next_pwrsts */ list_for_each_entry(pwrst, &pwrst_list, node) pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm); @@ -690,6 +926,22 @@ static void __init prcm_setup_regs(void) omap3_d2d_idle(); } +void omap3_pm_off_mode_enable(int enable) +{ + struct power_state *pwrst; + u32 state; + + if (enable) + state = PWRDM_POWER_OFF; + else + state = PWRDM_POWER_RET; + + list_for_each_entry(pwrst, &pwrst_list, node) { + pwrst->next_state = state; + set_pwrdm_state(pwrst->pwrdm, state); + } +} + int omap3_pm_get_suspend_state(struct powerdomain *pwrdm) { struct power_state *pwrst; @@ -749,6 +1001,15 @@ static int __init clkdms_setup(struct clockdomain *clkdm, void *unused) return 0; } +void omap_push_sram_idle(void) +{ + _omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend, + omap34xx_cpu_suspend_sz); + if (omap_type() != OMAP2_DEVICE_TYPE_GP) + _omap_save_secure_sram = omap_sram_push(save_secure_ram_context, + save_secure_ram_context_sz); +} + static int __init omap3_pm_init(void) { struct power_state *pwrst, *tmp; @@ -786,15 +1047,47 @@ static int __init omap3_pm_init(void) goto err2; } - _omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend, - omap34xx_cpu_suspend_sz); + neon_pwrdm = pwrdm_lookup("neon_pwrdm"); + per_pwrdm = pwrdm_lookup("per_pwrdm"); + core_pwrdm = pwrdm_lookup("core_pwrdm"); + cam_pwrdm = pwrdm_lookup("cam_pwrdm"); + omap_push_sram_idle(); #ifdef CONFIG_SUSPEND suspend_set_ops(&omap_pm_ops); #endif /* CONFIG_SUSPEND */ pm_idle = omap3_pm_idle; + omap3_idle_init(); + + pwrdm_add_wkdep(neon_pwrdm, mpu_pwrdm); + /* + * REVISIT: This wkdep is only necessary when GPIO2-6 are enabled for + * IO-pad wakeup. Otherwise it will unnecessarily waste power + * waking up PER with every CORE wakeup - see + * http://marc.info/?l=linux-omap&m=121852150710062&w=2 + */ + pwrdm_add_wkdep(per_pwrdm, core_pwrdm); + + if (omap_type() != OMAP2_DEVICE_TYPE_GP) { + omap3_secure_ram_storage = + kmalloc(0x803F, GFP_KERNEL); + if (!omap3_secure_ram_storage) + printk(KERN_ERR "Memory allocation failed when" + "allocating for secure sram context\n"); + + local_irq_disable(); + local_fiq_disable(); + + omap_dma_global_context_save(); + omap3_save_secure_ram_context(PWRDM_POWER_ON); + omap_dma_global_context_restore(); + + local_irq_enable(); + local_fiq_enable(); + } + omap3_save_scratchpad_contents(); err1: return ret; err2: diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index f00289abd30f..b6990e377783 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -31,9 +31,9 @@ #include "prm.h" #include "prm-regbits-34xx.h" -#include <mach/cpu.h> -#include <mach/powerdomain.h> -#include <mach/clockdomain.h> +#include <plat/cpu.h> +#include <plat/powerdomain.h> +#include <plat/clockdomain.h> #include "pm.h" diff --git a/arch/arm/mach-omap2/powerdomains.h b/arch/arm/mach-omap2/powerdomains.h index 691470ea4c6a..057b2e3e2c35 100644 --- a/arch/arm/mach-omap2/powerdomains.h +++ b/arch/arm/mach-omap2/powerdomains.h @@ -63,7 +63,7 @@ * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE */ -#include <mach/powerdomain.h> +#include <plat/powerdomain.h> #include "prcm-common.h" #include "prm.h" diff --git a/arch/arm/mach-omap2/powerdomains24xx.h b/arch/arm/mach-omap2/powerdomains24xx.h index 9f08dc3f7fd2..bd249a495aa9 100644 --- a/arch/arm/mach-omap2/powerdomains24xx.h +++ b/arch/arm/mach-omap2/powerdomains24xx.h @@ -20,7 +20,7 @@ * the array in mach-omap2/powerdomains.h. */ -#include <mach/powerdomain.h> +#include <plat/powerdomain.h> #include "prcm-common.h" #include "prm.h" diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h index 4dcf94b800ab..fd09b0827df0 100644 --- a/arch/arm/mach-omap2/powerdomains34xx.h +++ b/arch/arm/mach-omap2/powerdomains34xx.h @@ -20,7 +20,7 @@ * the array in mach-omap2/powerdomains.h. */ -#include <mach/powerdomain.h> +#include <plat/powerdomain.h> #include "prcm-common.h" #include "prm.h" @@ -338,7 +338,13 @@ static struct powerdomain usbhost_pwrdm = { .sleepdep_srcs = dss_per_usbhost_sleepdeps, .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRDM_POWER_RET, - .flags = PWRDM_HAS_HDWR_SAR, /* for USBHOST ctrlr only */ + /* + * REVISIT: Enabling usb host save and restore mechanism seems to + * leave the usb host domain permanently in ACTIVE mode after + * changing the usb host power domain state from OFF to active once. + * Disabling for now. + */ + /*.flags = PWRDM_HAS_HDWR_SAR,*/ /* for USBHOST ctrlr only */ .banks = 1, .pwrsts_mem_ret = { [0] = PWRDM_POWER_RET, /* MEMRETSTATE */ diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index ced555a4cd1a..029d376198d4 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -7,6 +7,9 @@ * * Written by Tony Lindgren <tony.lindgren@nokia.com> * + * Copyright (C) 2007 Texas Instruments, Inc. + * Rajendra Nayak <rnayak@ti.com> + * * Some pieces of code Copyright (C) 2005 Texas Instruments, Inc. * * This program is free software; you can redistribute it and/or modify @@ -19,10 +22,13 @@ #include <linux/io.h> #include <linux/delay.h> -#include <mach/common.h> -#include <mach/prcm.h> +#include <plat/common.h> +#include <plat/prcm.h> +#include <plat/irqs.h> +#include <plat/control.h> #include "clock.h" +#include "cm.h" #include "prm.h" #include "prm-regbits-24xx.h" @@ -31,6 +37,89 @@ static void __iomem *cm_base; #define MAX_MODULE_ENABLE_WAIT 100000 +struct omap3_prcm_regs { + u32 control_padconf_sys_nirq; + u32 iva2_cm_clksel1; + u32 iva2_cm_clksel2; + u32 cm_sysconfig; + u32 sgx_cm_clksel; + u32 wkup_cm_clksel; + u32 dss_cm_clksel; + u32 cam_cm_clksel; + u32 per_cm_clksel; + u32 emu_cm_clksel; + u32 emu_cm_clkstctrl; + u32 pll_cm_autoidle2; + u32 pll_cm_clksel4; + u32 pll_cm_clksel5; + u32 pll_cm_clken; + u32 pll_cm_clken2; + u32 cm_polctrl; + u32 iva2_cm_fclken; + u32 iva2_cm_clken_pll; + u32 core_cm_fclken1; + u32 core_cm_fclken3; + u32 sgx_cm_fclken; + u32 wkup_cm_fclken; + u32 dss_cm_fclken; + u32 cam_cm_fclken; + u32 per_cm_fclken; + u32 usbhost_cm_fclken; + u32 core_cm_iclken1; + u32 core_cm_iclken2; + u32 core_cm_iclken3; + u32 sgx_cm_iclken; + u32 wkup_cm_iclken; + u32 dss_cm_iclken; + u32 cam_cm_iclken; + u32 per_cm_iclken; + u32 usbhost_cm_iclken; + u32 iva2_cm_autiidle2; + u32 mpu_cm_autoidle2; + u32 pll_cm_autoidle; + u32 iva2_cm_clkstctrl; + u32 mpu_cm_clkstctrl; + u32 core_cm_clkstctrl; + u32 sgx_cm_clkstctrl; + u32 dss_cm_clkstctrl; + u32 cam_cm_clkstctrl; + u32 per_cm_clkstctrl; + u32 neon_cm_clkstctrl; + u32 usbhost_cm_clkstctrl; + u32 core_cm_autoidle1; + u32 core_cm_autoidle2; + u32 core_cm_autoidle3; + u32 wkup_cm_autoidle; + u32 dss_cm_autoidle; + u32 cam_cm_autoidle; + u32 per_cm_autoidle; + u32 usbhost_cm_autoidle; + u32 sgx_cm_sleepdep; + u32 dss_cm_sleepdep; + u32 cam_cm_sleepdep; + u32 per_cm_sleepdep; + u32 usbhost_cm_sleepdep; + u32 cm_clkout_ctrl; + u32 prm_clkout_ctrl; + u32 sgx_pm_wkdep; + u32 dss_pm_wkdep; + u32 cam_pm_wkdep; + u32 per_pm_wkdep; + u32 neon_pm_wkdep; + u32 usbhost_pm_wkdep; + u32 core_pm_mpugrpsel1; + u32 iva2_pm_ivagrpsel1; + u32 core_pm_mpugrpsel3; + u32 core_pm_ivagrpsel3; + u32 wkup_pm_mpugrpsel; + u32 wkup_pm_ivagrpsel; + u32 per_pm_mpugrpsel; + u32 per_pm_ivagrpsel; + u32 wkup_pm_wken; +}; + +struct omap3_prcm_regs prcm_context; + u32 omap_prcm_get_reset_sources(void) { /* XXX This presumably needs modification for 34XX */ @@ -46,9 +135,18 @@ void omap_prcm_arch_reset(char mode) if (cpu_is_omap24xx()) prcm_offs = WKUP_MOD; - else if (cpu_is_omap34xx()) + else if (cpu_is_omap34xx()) { + u32 l; + prcm_offs = OMAP3430_GR_MOD; - else + l = ('B' << 24) | ('M' << 16) | mode; + /* Reserve the first word in scratchpad for communicating + * with the boot ROM. A pointer to a data structure + * describing the boot process can be stored there, + * cf. OMAP34xx TRM, Initialization / Software Booting + * Configuration. */ + omap_writel(l, OMAP343X_SCRATCHPAD + 4); + } else WARN_ON(1); prm_set_mod_reg_bits(OMAP_RST_DPLL3, prcm_offs, RM_RSTCTRL); @@ -168,3 +266,308 @@ void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals) prm_base = omap2_globals->prm; cm_base = omap2_globals->cm; } + +#ifdef CONFIG_ARCH_OMAP3 +void omap3_prcm_save_context(void) +{ + prcm_context.control_padconf_sys_nirq = + omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_SYSNIRQ); + prcm_context.iva2_cm_clksel1 = + cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSEL1); + prcm_context.iva2_cm_clksel2 = + cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSEL2); + prcm_context.cm_sysconfig = __raw_readl(OMAP3430_CM_SYSCONFIG); + prcm_context.sgx_cm_clksel = + cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_CLKSEL); + prcm_context.wkup_cm_clksel = cm_read_mod_reg(WKUP_MOD, CM_CLKSEL); + prcm_context.dss_cm_clksel = + cm_read_mod_reg(OMAP3430_DSS_MOD, CM_CLKSEL); + prcm_context.cam_cm_clksel = + cm_read_mod_reg(OMAP3430_CAM_MOD, CM_CLKSEL); + prcm_context.per_cm_clksel = + cm_read_mod_reg(OMAP3430_PER_MOD, CM_CLKSEL); + prcm_context.emu_cm_clksel = + cm_read_mod_reg(OMAP3430_EMU_MOD, CM_CLKSEL1); + prcm_context.emu_cm_clkstctrl = + cm_read_mod_reg(OMAP3430_EMU_MOD, CM_CLKSTCTRL); + prcm_context.pll_cm_autoidle2 = + cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE2); + prcm_context.pll_cm_clksel4 = + cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL4); + prcm_context.pll_cm_clksel5 = + cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL5); + prcm_context.pll_cm_clken = + cm_read_mod_reg(PLL_MOD, CM_CLKEN); + prcm_context.pll_cm_clken2 = + cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKEN2); + prcm_context.cm_polctrl = __raw_readl(OMAP3430_CM_POLCTRL); + prcm_context.iva2_cm_fclken = + cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_FCLKEN); + prcm_context.iva2_cm_clken_pll = cm_read_mod_reg(OMAP3430_IVA2_MOD, + OMAP3430_CM_CLKEN_PLL); + prcm_context.core_cm_fclken1 = + cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); + prcm_context.core_cm_fclken3 = + cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3); + prcm_context.sgx_cm_fclken = + cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_FCLKEN); + prcm_context.wkup_cm_fclken = + cm_read_mod_reg(WKUP_MOD, CM_FCLKEN); + prcm_context.dss_cm_fclken = + cm_read_mod_reg(OMAP3430_DSS_MOD, CM_FCLKEN); + prcm_context.cam_cm_fclken = + cm_read_mod_reg(OMAP3430_CAM_MOD, CM_FCLKEN); + prcm_context.per_cm_fclken = + cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN); + prcm_context.usbhost_cm_fclken = + cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN); + prcm_context.core_cm_iclken1 = + cm_read_mod_reg(CORE_MOD, CM_ICLKEN1); + prcm_context.core_cm_iclken2 = + cm_read_mod_reg(CORE_MOD, CM_ICLKEN2); + prcm_context.core_cm_iclken3 = + cm_read_mod_reg(CORE_MOD, CM_ICLKEN3); + prcm_context.sgx_cm_iclken = + cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_ICLKEN); + prcm_context.wkup_cm_iclken = + cm_read_mod_reg(WKUP_MOD, CM_ICLKEN); + prcm_context.dss_cm_iclken = + cm_read_mod_reg(OMAP3430_DSS_MOD, CM_ICLKEN); + prcm_context.cam_cm_iclken = + cm_read_mod_reg(OMAP3430_CAM_MOD, CM_ICLKEN); + prcm_context.per_cm_iclken = + cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN); + prcm_context.usbhost_cm_iclken = + cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN); + prcm_context.iva2_cm_autiidle2 = + cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_AUTOIDLE2); + prcm_context.mpu_cm_autoidle2 = + cm_read_mod_reg(MPU_MOD, CM_AUTOIDLE2); + prcm_context.pll_cm_autoidle = + cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE); + prcm_context.iva2_cm_clkstctrl = + cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSTCTRL); + prcm_context.mpu_cm_clkstctrl = + cm_read_mod_reg(MPU_MOD, CM_CLKSTCTRL); + prcm_context.core_cm_clkstctrl = + cm_read_mod_reg(CORE_MOD, CM_CLKSTCTRL); + prcm_context.sgx_cm_clkstctrl = + cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_CLKSTCTRL); + prcm_context.dss_cm_clkstctrl = + cm_read_mod_reg(OMAP3430_DSS_MOD, CM_CLKSTCTRL); + prcm_context.cam_cm_clkstctrl = + cm_read_mod_reg(OMAP3430_CAM_MOD, CM_CLKSTCTRL); + prcm_context.per_cm_clkstctrl = + cm_read_mod_reg(OMAP3430_PER_MOD, CM_CLKSTCTRL); + prcm_context.neon_cm_clkstctrl = + cm_read_mod_reg(OMAP3430_NEON_MOD, CM_CLKSTCTRL); + prcm_context.usbhost_cm_clkstctrl = + cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_CLKSTCTRL); + prcm_context.core_cm_autoidle1 = + cm_read_mod_reg(CORE_MOD, CM_AUTOIDLE1); + prcm_context.core_cm_autoidle2 = + cm_read_mod_reg(CORE_MOD, CM_AUTOIDLE2); + prcm_context.core_cm_autoidle3 = + cm_read_mod_reg(CORE_MOD, CM_AUTOIDLE3); + prcm_context.wkup_cm_autoidle = + cm_read_mod_reg(WKUP_MOD, CM_AUTOIDLE); + prcm_context.dss_cm_autoidle = + cm_read_mod_reg(OMAP3430_DSS_MOD, CM_AUTOIDLE); + prcm_context.cam_cm_autoidle = + cm_read_mod_reg(OMAP3430_CAM_MOD, CM_AUTOIDLE); + prcm_context.per_cm_autoidle = + cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE); + prcm_context.usbhost_cm_autoidle = + cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_AUTOIDLE); + prcm_context.sgx_cm_sleepdep = + cm_read_mod_reg(OMAP3430ES2_SGX_MOD, OMAP3430_CM_SLEEPDEP); + prcm_context.dss_cm_sleepdep = + cm_read_mod_reg(OMAP3430_DSS_MOD, OMAP3430_CM_SLEEPDEP); + prcm_context.cam_cm_sleepdep = + cm_read_mod_reg(OMAP3430_CAM_MOD, OMAP3430_CM_SLEEPDEP); + prcm_context.per_cm_sleepdep = + cm_read_mod_reg(OMAP3430_PER_MOD, OMAP3430_CM_SLEEPDEP); + prcm_context.usbhost_cm_sleepdep = + cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, OMAP3430_CM_SLEEPDEP); + prcm_context.cm_clkout_ctrl = cm_read_mod_reg(OMAP3430_CCR_MOD, + OMAP3_CM_CLKOUT_CTRL_OFFSET); + prcm_context.prm_clkout_ctrl = prm_read_mod_reg(OMAP3430_CCR_MOD, + OMAP3_PRM_CLKOUT_CTRL_OFFSET); + prcm_context.sgx_pm_wkdep = + prm_read_mod_reg(OMAP3430ES2_SGX_MOD, PM_WKDEP); + prcm_context.dss_pm_wkdep = + prm_read_mod_reg(OMAP3430_DSS_MOD, PM_WKDEP); + prcm_context.cam_pm_wkdep = + prm_read_mod_reg(OMAP3430_CAM_MOD, PM_WKDEP); + prcm_context.per_pm_wkdep = + prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKDEP); + prcm_context.neon_pm_wkdep = + prm_read_mod_reg(OMAP3430_NEON_MOD, PM_WKDEP); + prcm_context.usbhost_pm_wkdep = + prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, PM_WKDEP); + prcm_context.core_pm_mpugrpsel1 = + prm_read_mod_reg(CORE_MOD, OMAP3430_PM_MPUGRPSEL1); + prcm_context.iva2_pm_ivagrpsel1 = + prm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_PM_IVAGRPSEL1); + prcm_context.core_pm_mpugrpsel3 = + prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_MPUGRPSEL3); + prcm_context.core_pm_ivagrpsel3 = + prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3); + prcm_context.wkup_pm_mpugrpsel = + prm_read_mod_reg(WKUP_MOD, OMAP3430_PM_MPUGRPSEL); + prcm_context.wkup_pm_ivagrpsel = + prm_read_mod_reg(WKUP_MOD, OMAP3430_PM_IVAGRPSEL); + prcm_context.per_pm_mpugrpsel = + prm_read_mod_reg(OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL); + prcm_context.per_pm_ivagrpsel = + prm_read_mod_reg(OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL); + prcm_context.wkup_pm_wken = prm_read_mod_reg(WKUP_MOD, PM_WKEN); + return; +} + +void omap3_prcm_restore_context(void) +{ + omap_ctrl_writel(prcm_context.control_padconf_sys_nirq, + OMAP343X_CONTROL_PADCONF_SYSNIRQ); + cm_write_mod_reg(prcm_context.iva2_cm_clksel1, OMAP3430_IVA2_MOD, + CM_CLKSEL1); + cm_write_mod_reg(prcm_context.iva2_cm_clksel2, OMAP3430_IVA2_MOD, + CM_CLKSEL2); + __raw_writel(prcm_context.cm_sysconfig, OMAP3430_CM_SYSCONFIG); + cm_write_mod_reg(prcm_context.sgx_cm_clksel, OMAP3430ES2_SGX_MOD, + CM_CLKSEL); + cm_write_mod_reg(prcm_context.wkup_cm_clksel, WKUP_MOD, CM_CLKSEL); + cm_write_mod_reg(prcm_context.dss_cm_clksel, OMAP3430_DSS_MOD, + CM_CLKSEL); + cm_write_mod_reg(prcm_context.cam_cm_clksel, OMAP3430_CAM_MOD, + CM_CLKSEL); + cm_write_mod_reg(prcm_context.per_cm_clksel, OMAP3430_PER_MOD, + CM_CLKSEL); + cm_write_mod_reg(prcm_context.emu_cm_clksel, OMAP3430_EMU_MOD, + CM_CLKSEL1); + cm_write_mod_reg(prcm_context.emu_cm_clkstctrl, OMAP3430_EMU_MOD, + CM_CLKSTCTRL); + cm_write_mod_reg(prcm_context.pll_cm_autoidle2, PLL_MOD, + CM_AUTOIDLE2); + cm_write_mod_reg(prcm_context.pll_cm_clksel4, PLL_MOD, + OMAP3430ES2_CM_CLKSEL4); + cm_write_mod_reg(prcm_context.pll_cm_clksel5, PLL_MOD, + OMAP3430ES2_CM_CLKSEL5); + cm_write_mod_reg(prcm_context.pll_cm_clken, PLL_MOD, CM_CLKEN); + cm_write_mod_reg(prcm_context.pll_cm_clken2, PLL_MOD, + OMAP3430ES2_CM_CLKEN2); + __raw_writel(prcm_context.cm_polctrl, OMAP3430_CM_POLCTRL); + cm_write_mod_reg(prcm_context.iva2_cm_fclken, OMAP3430_IVA2_MOD, + CM_FCLKEN); + cm_write_mod_reg(prcm_context.iva2_cm_clken_pll, OMAP3430_IVA2_MOD, + OMAP3430_CM_CLKEN_PLL); + cm_write_mod_reg(prcm_context.core_cm_fclken1, CORE_MOD, CM_FCLKEN1); + cm_write_mod_reg(prcm_context.core_cm_fclken3, CORE_MOD, + OMAP3430ES2_CM_FCLKEN3); + cm_write_mod_reg(prcm_context.sgx_cm_fclken, OMAP3430ES2_SGX_MOD, + CM_FCLKEN); + cm_write_mod_reg(prcm_context.wkup_cm_fclken, WKUP_MOD, CM_FCLKEN); + cm_write_mod_reg(prcm_context.dss_cm_fclken, OMAP3430_DSS_MOD, + CM_FCLKEN); + cm_write_mod_reg(prcm_context.cam_cm_fclken, OMAP3430_CAM_MOD, + CM_FCLKEN); + cm_write_mod_reg(prcm_context.per_cm_fclken, OMAP3430_PER_MOD, + CM_FCLKEN); + cm_write_mod_reg(prcm_context.usbhost_cm_fclken, + OMAP3430ES2_USBHOST_MOD, CM_FCLKEN); + cm_write_mod_reg(prcm_context.core_cm_iclken1, CORE_MOD, CM_ICLKEN1); + cm_write_mod_reg(prcm_context.core_cm_iclken2, CORE_MOD, CM_ICLKEN2); + cm_write_mod_reg(prcm_context.core_cm_iclken3, CORE_MOD, CM_ICLKEN3); + cm_write_mod_reg(prcm_context.sgx_cm_iclken, OMAP3430ES2_SGX_MOD, + CM_ICLKEN); + cm_write_mod_reg(prcm_context.wkup_cm_iclken, WKUP_MOD, CM_ICLKEN); + cm_write_mod_reg(prcm_context.dss_cm_iclken, OMAP3430_DSS_MOD, + CM_ICLKEN); + cm_write_mod_reg(prcm_context.cam_cm_iclken, OMAP3430_CAM_MOD, + CM_ICLKEN); + cm_write_mod_reg(prcm_context.per_cm_iclken, OMAP3430_PER_MOD, + CM_ICLKEN); + cm_write_mod_reg(prcm_context.usbhost_cm_iclken, + OMAP3430ES2_USBHOST_MOD, CM_ICLKEN); + cm_write_mod_reg(prcm_context.iva2_cm_autiidle2, OMAP3430_IVA2_MOD, + CM_AUTOIDLE2); + cm_write_mod_reg(prcm_context.mpu_cm_autoidle2, MPU_MOD, CM_AUTOIDLE2); + cm_write_mod_reg(prcm_context.pll_cm_autoidle, PLL_MOD, CM_AUTOIDLE); + cm_write_mod_reg(prcm_context.iva2_cm_clkstctrl, OMAP3430_IVA2_MOD, + CM_CLKSTCTRL); + cm_write_mod_reg(prcm_context.mpu_cm_clkstctrl, MPU_MOD, CM_CLKSTCTRL); + cm_write_mod_reg(prcm_context.core_cm_clkstctrl, CORE_MOD, + CM_CLKSTCTRL); + cm_write_mod_reg(prcm_context.sgx_cm_clkstctrl, OMAP3430ES2_SGX_MOD, + CM_CLKSTCTRL); + cm_write_mod_reg(prcm_context.dss_cm_clkstctrl, OMAP3430_DSS_MOD, + CM_CLKSTCTRL); + cm_write_mod_reg(prcm_context.cam_cm_clkstctrl, OMAP3430_CAM_MOD, + CM_CLKSTCTRL); + cm_write_mod_reg(prcm_context.per_cm_clkstctrl, OMAP3430_PER_MOD, + CM_CLKSTCTRL); + cm_write_mod_reg(prcm_context.neon_cm_clkstctrl, OMAP3430_NEON_MOD, + CM_CLKSTCTRL); + cm_write_mod_reg(prcm_context.usbhost_cm_clkstctrl, + OMAP3430ES2_USBHOST_MOD, CM_CLKSTCTRL); + cm_write_mod_reg(prcm_context.core_cm_autoidle1, CORE_MOD, + CM_AUTOIDLE1); + cm_write_mod_reg(prcm_context.core_cm_autoidle2, CORE_MOD, + CM_AUTOIDLE2); + cm_write_mod_reg(prcm_context.core_cm_autoidle3, CORE_MOD, + CM_AUTOIDLE3); + cm_write_mod_reg(prcm_context.wkup_cm_autoidle, WKUP_MOD, CM_AUTOIDLE); + cm_write_mod_reg(prcm_context.dss_cm_autoidle, OMAP3430_DSS_MOD, + CM_AUTOIDLE); + cm_write_mod_reg(prcm_context.cam_cm_autoidle, OMAP3430_CAM_MOD, + CM_AUTOIDLE); + cm_write_mod_reg(prcm_context.per_cm_autoidle, OMAP3430_PER_MOD, + CM_AUTOIDLE); + cm_write_mod_reg(prcm_context.usbhost_cm_autoidle, + OMAP3430ES2_USBHOST_MOD, CM_AUTOIDLE); + cm_write_mod_reg(prcm_context.sgx_cm_sleepdep, OMAP3430ES2_SGX_MOD, + OMAP3430_CM_SLEEPDEP); + cm_write_mod_reg(prcm_context.dss_cm_sleepdep, OMAP3430_DSS_MOD, + OMAP3430_CM_SLEEPDEP); + cm_write_mod_reg(prcm_context.cam_cm_sleepdep, OMAP3430_CAM_MOD, + OMAP3430_CM_SLEEPDEP); + cm_write_mod_reg(prcm_context.per_cm_sleepdep, OMAP3430_PER_MOD, + OMAP3430_CM_SLEEPDEP); + cm_write_mod_reg(prcm_context.usbhost_cm_sleepdep, + OMAP3430ES2_USBHOST_MOD, OMAP3430_CM_SLEEPDEP); + cm_write_mod_reg(prcm_context.cm_clkout_ctrl, OMAP3430_CCR_MOD, + OMAP3_CM_CLKOUT_CTRL_OFFSET); + prm_write_mod_reg(prcm_context.prm_clkout_ctrl, OMAP3430_CCR_MOD, + OMAP3_PRM_CLKOUT_CTRL_OFFSET); + prm_write_mod_reg(prcm_context.sgx_pm_wkdep, OMAP3430ES2_SGX_MOD, + PM_WKDEP); + prm_write_mod_reg(prcm_context.dss_pm_wkdep, OMAP3430_DSS_MOD, + PM_WKDEP); + prm_write_mod_reg(prcm_context.cam_pm_wkdep, OMAP3430_CAM_MOD, + PM_WKDEP); + prm_write_mod_reg(prcm_context.per_pm_wkdep, OMAP3430_PER_MOD, + PM_WKDEP); + prm_write_mod_reg(prcm_context.neon_pm_wkdep, OMAP3430_NEON_MOD, + PM_WKDEP); + prm_write_mod_reg(prcm_context.usbhost_pm_wkdep, + OMAP3430ES2_USBHOST_MOD, PM_WKDEP); + prm_write_mod_reg(prcm_context.core_pm_mpugrpsel1, CORE_MOD, + OMAP3430_PM_MPUGRPSEL1); + prm_write_mod_reg(prcm_context.iva2_pm_ivagrpsel1, OMAP3430_IVA2_MOD, + OMAP3430_PM_IVAGRPSEL1); + prm_write_mod_reg(prcm_context.core_pm_mpugrpsel3, CORE_MOD, + OMAP3430ES2_PM_MPUGRPSEL3); + prm_write_mod_reg(prcm_context.core_pm_ivagrpsel3, CORE_MOD, + OMAP3430ES2_PM_IVAGRPSEL3); + prm_write_mod_reg(prcm_context.wkup_pm_mpugrpsel, WKUP_MOD, + OMAP3430_PM_MPUGRPSEL); + prm_write_mod_reg(prcm_context.wkup_pm_ivagrpsel, WKUP_MOD, + OMAP3430_PM_IVAGRPSEL); + prm_write_mod_reg(prcm_context.per_pm_mpugrpsel, OMAP3430_PER_MOD, + OMAP3430_PM_MPUGRPSEL); + prm_write_mod_reg(prcm_context.per_pm_ivagrpsel, OMAP3430_PER_MOD, + OMAP3430_PM_IVAGRPSEL); + prm_write_mod_reg(prcm_context.wkup_pm_wken, WKUP_MOD, PM_WKEN); + return; +} +#endif diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h index 9fd03a2ec95c..8f21bae6dc1c 100644 --- a/arch/arm/mach-omap2/prm-regbits-34xx.h +++ b/arch/arm/mach-omap2/prm-regbits-34xx.h @@ -365,6 +365,7 @@ /* PM_PREPWSTST_GFX specific bits */ /* PM_WKEN_WKUP specific bits */ +#define OMAP3430_EN_IO_CHAIN (1 << 16) #define OMAP3430_EN_IO (1 << 8) #define OMAP3430_EN_GPIO1 (1 << 3) @@ -373,6 +374,7 @@ /* PM_IVA2GRPSEL_WKUP specific bits */ /* PM_WKST_WKUP specific bits */ +#define OMAP3430_ST_IO_CHAIN (1 << 16) #define OMAP3430_ST_IO (1 << 8) /* PRM_CLKSEL */ diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h index 03c467c35f54..a117f853ea39 100644 --- a/arch/arm/mach-omap2/prm.h +++ b/arch/arm/mach-omap2/prm.h @@ -17,11 +17,11 @@ #include "prcm-common.h" #define OMAP2420_PRM_REGADDR(module, reg) \ - OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg)) + OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg)) #define OMAP2430_PRM_REGADDR(module, reg) \ - OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg)) + OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg)) #define OMAP34XX_PRM_REGADDR(module, reg) \ - OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg)) + OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg)) /* * Architecture-specific global PRM registers diff --git a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h index 02e1c2d4705f..a391b4939f74 100644 --- a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h +++ b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h @@ -14,7 +14,7 @@ #ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF #define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF -#include <mach/sdrc.h> +#include <plat/sdrc.h> /* Micron MT46H32M32LF-6 */ /* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */ diff --git a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h index 3751d293cb1f..0e518a72831f 100644 --- a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h +++ b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h @@ -14,7 +14,7 @@ #ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6 #define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6 -#include <mach/sdrc.h> +#include <plat/sdrc.h> /* Qimonda HYB18M512160AF-6 */ static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = { diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index 9e3bd4fa7810..9a592199321c 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -23,13 +23,13 @@ #include <linux/clk.h> #include <linux/io.h> -#include <mach/common.h> -#include <mach/clock.h> -#include <mach/sram.h> +#include <plat/common.h> +#include <plat/clock.h> +#include <plat/sram.h> #include "prm.h" -#include <mach/sdrc.h> +#include <plat/sdrc.h> #include "sdrc.h" static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1; @@ -37,12 +37,38 @@ static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1; void __iomem *omap2_sdrc_base; void __iomem *omap2_sms_base; +struct omap2_sms_regs { + u32 sms_sysconfig; +}; + +static struct omap2_sms_regs sms_context; + /* SDRC_POWER register bits */ #define SDRC_POWER_EXTCLKDIS_SHIFT 3 #define SDRC_POWER_PWDENA_SHIFT 2 #define SDRC_POWER_PAGEPOLICY_SHIFT 0 /** + * omap2_sms_save_context - Save SMS registers + * + * Save SMS registers that need to be restored after off mode. + */ +void omap2_sms_save_context(void) +{ + sms_context.sms_sysconfig = sms_read_reg(SMS_SYSCONFIG); +} + +/** + * omap2_sms_restore_context - Restore SMS registers + * + * Restore SMS registers that need to be Restored after off mode. + */ +void omap2_sms_restore_context(void) +{ + sms_write_reg(sms_context.sms_sysconfig, SMS_SYSCONFIG); +} + +/** * omap2_sdrc_get_params - return SDRC register values for a given clock rate * @r: SDRC clock rate (in Hz) * @sdrc_cs0: chip select 0 ram timings ** @@ -132,4 +158,5 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) | (1 << SDRC_POWER_PAGEPOLICY_SHIFT); sdrc_write_reg(l, SDRC_POWER); + omap2_sms_save_context(); } diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h index 0837eda5f2b6..48207b018989 100644 --- a/arch/arm/mach-omap2/sdrc.h +++ b/arch/arm/mach-omap2/sdrc.h @@ -15,7 +15,7 @@ */ #undef DEBUG -#include <mach/sdrc.h> +#include <plat/sdrc.h> #ifndef __ASSEMBLER__ extern void __iomem *omap2_sdrc_base; @@ -48,9 +48,12 @@ static inline u32 sms_read_reg(u16 reg) return __raw_readl(OMAP_SMS_REGADDR(reg)); } #else -#define OMAP242X_SDRC_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg)) -#define OMAP243X_SDRC_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg)) -#define OMAP34XX_SDRC_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg)) +#define OMAP242X_SDRC_REGADDR(reg) \ + OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg)) +#define OMAP243X_SDRC_REGADDR(reg) \ + OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg)) +#define OMAP34XX_SDRC_REGADDR(reg) \ + OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg)) #endif /* __ASSEMBLER__ */ #endif diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c index feaec7eaf6bd..0f4d27aef44d 100644 --- a/arch/arm/mach-omap2/sdrc2xxx.c +++ b/arch/arm/mach-omap2/sdrc2xxx.c @@ -24,13 +24,13 @@ #include <linux/clk.h> #include <linux/io.h> -#include <mach/common.h> -#include <mach/clock.h> -#include <mach/sram.h> +#include <plat/common.h> +#include <plat/clock.h> +#include <plat/sram.h> #include "prm.h" #include "clock.h" -#include <mach/sdrc.h> +#include <plat/sdrc.h> #include "sdrc.h" /* Memory timing, DLL mode flags */ diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 54dfeb5d5667..72df1b188135 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -24,10 +24,10 @@ #include <linux/clk.h> #include <linux/io.h> -#include <mach/common.h> -#include <mach/board.h> -#include <mach/clock.h> -#include <mach/control.h> +#include <plat/common.h> +#include <plat/board.h> +#include <plat/clock.h> +#include <plat/control.h> #include "prm.h" #include "pm.h" @@ -73,7 +73,6 @@ static LIST_HEAD(uart_list); static struct plat_serial8250_port serial_platform_data0[] = { { - .membase = OMAP2_IO_ADDRESS(OMAP_UART1_BASE), .mapbase = OMAP_UART1_BASE, .irq = 72, .flags = UPF_BOOT_AUTOCONF, @@ -87,7 +86,6 @@ static struct plat_serial8250_port serial_platform_data0[] = { static struct plat_serial8250_port serial_platform_data1[] = { { - .membase = OMAP2_IO_ADDRESS(OMAP_UART2_BASE), .mapbase = OMAP_UART2_BASE, .irq = 73, .flags = UPF_BOOT_AUTOCONF, @@ -101,7 +99,6 @@ static struct plat_serial8250_port serial_platform_data1[] = { static struct plat_serial8250_port serial_platform_data2[] = { { - .membase = OMAP2_IO_ADDRESS(OMAP_UART3_BASE), .mapbase = OMAP_UART3_BASE, .irq = 74, .flags = UPF_BOOT_AUTOCONF, @@ -116,7 +113,6 @@ static struct plat_serial8250_port serial_platform_data2[] = { #ifdef CONFIG_ARCH_OMAP4 static struct plat_serial8250_port serial_platform_data3[] = { { - .membase = OMAP2_IO_ADDRESS(OMAP_UART4_BASE), .mapbase = OMAP_UART4_BASE, .irq = 70, .flags = UPF_BOOT_AUTOCONF, @@ -159,8 +155,6 @@ static inline void __init omap_uart_reset(struct omap_uart_state *uart) #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) -static int enable_off_mode; /* to be removed by full off-mode patches */ - static void omap_uart_save_context(struct omap_uart_state *uart) { u16 lcr = 0; @@ -595,6 +589,16 @@ void __init omap_serial_early_init(void) struct device *dev = &pdev->dev; struct plat_serial8250_port *p = dev->platform_data; + /* + * Module 4KB + L4 interconnect 4KB + * Static mapping, never released + */ + p->membase = ioremap(p->mapbase, SZ_8K); + if (!p->membase) { + printk(KERN_ERR "ioremap failed for uart%i\n", i + 1); + continue; + } + sprintf(name, "uart%d_ick", i+1); uart->ick = clk_get(NULL, name); if (IS_ERR(uart->ick)) { diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S index 130aadbfa083..c7780cc8d919 100644 --- a/arch/arm/mach-omap2/sleep24xx.S +++ b/arch/arm/mach-omap2/sleep24xx.S @@ -29,7 +29,7 @@ #include <asm/assembler.h> #include <mach/io.h> -#include <mach/omap24xx.h> +#include <plat/omap24xx.h> #include "sdrc.h" diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index e5e2553e79a6..15268f8b61de 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -27,22 +27,35 @@ #include <linux/linkage.h> #include <asm/assembler.h> #include <mach/io.h> -#include <mach/control.h> +#include <plat/control.h> +#include "cm.h" #include "prm.h" #include "sdrc.h" #define PM_PREPWSTST_CORE_V OMAP34XX_PRM_REGADDR(CORE_MOD, \ OMAP3430_PM_PREPWSTST) +#define PM_PREPWSTST_CORE_P 0x48306AE8 #define PM_PREPWSTST_MPU_V OMAP34XX_PRM_REGADDR(MPU_MOD, \ OMAP3430_PM_PREPWSTST) -#define PM_PWSTCTRL_MPU_P OMAP34XX_PRM_REGADDR(MPU_MOD, PM_PWSTCTRL) +#define PM_PWSTCTRL_MPU_P OMAP3430_PRM_BASE + MPU_MOD + PM_PWSTCTRL +#define CM_IDLEST1_CORE_V OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST1) +#define SRAM_BASE_P 0x40200000 +#define CONTROL_STAT 0x480022F0 #define SCRATCHPAD_MEM_OFFS 0x310 /* Move this as correct place is * available */ -#define SCRATCHPAD_BASE_P OMAP343X_CTRL_REGADDR(\ - OMAP343X_CONTROL_MEM_WKUP +\ - SCRATCHPAD_MEM_OFFS) +#define SCRATCHPAD_BASE_P (OMAP343X_CTRL_BASE + OMAP343X_CONTROL_MEM_WKUP\ + + SCRATCHPAD_MEM_OFFS) #define SDRC_POWER_V OMAP34XX_SDRC_REGADDR(SDRC_POWER) +#define SDRC_SYSCONFIG_P (OMAP343X_SDRC_BASE + SDRC_SYSCONFIG) +#define SDRC_MR_0_P (OMAP343X_SDRC_BASE + SDRC_MR_0) +#define SDRC_EMR2_0_P (OMAP343X_SDRC_BASE + SDRC_EMR2_0) +#define SDRC_MANUAL_0_P (OMAP343X_SDRC_BASE + SDRC_MANUAL_0) +#define SDRC_MR_1_P (OMAP343X_SDRC_BASE + SDRC_MR_1) +#define SDRC_EMR2_1_P (OMAP343X_SDRC_BASE + SDRC_EMR2_1) +#define SDRC_MANUAL_1_P (OMAP343X_SDRC_BASE + SDRC_MANUAL_1) +#define SDRC_DLLA_STATUS_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS) +#define SDRC_DLLA_CTRL_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL) .text /* Function call to get the restore pointer for resume from OFF */ @@ -51,7 +64,93 @@ ENTRY(get_restore_pointer) adr r0, restore ldmfd sp!, {pc} @ restore regs and return ENTRY(get_restore_pointer_sz) - .word . - get_restore_pointer_sz + .word . - get_restore_pointer + + .text +/* Function call to get the restore pointer for for ES3 to resume from OFF */ +ENTRY(get_es3_restore_pointer) + stmfd sp!, {lr} @ save registers on stack + adr r0, restore_es3 + ldmfd sp!, {pc} @ restore regs and return +ENTRY(get_es3_restore_pointer_sz) + .word . - get_es3_restore_pointer + +ENTRY(es3_sdrc_fix) + ldr r4, sdrc_syscfg @ get config addr + ldr r5, [r4] @ get value + tst r5, #0x100 @ is part access blocked + it eq + biceq r5, r5, #0x100 @ clear bit if set + str r5, [r4] @ write back change + ldr r4, sdrc_mr_0 @ get config addr + ldr r5, [r4] @ get value + str r5, [r4] @ write back change + ldr r4, sdrc_emr2_0 @ get config addr + ldr r5, [r4] @ get value + str r5, [r4] @ write back change + ldr r4, sdrc_manual_0 @ get config addr + mov r5, #0x2 @ autorefresh command + str r5, [r4] @ kick off refreshes + ldr r4, sdrc_mr_1 @ get config addr + ldr r5, [r4] @ get value + str r5, [r4] @ write back change + ldr r4, sdrc_emr2_1 @ get config addr + ldr r5, [r4] @ get value + str r5, [r4] @ write back change + ldr r4, sdrc_manual_1 @ get config addr + mov r5, #0x2 @ autorefresh command + str r5, [r4] @ kick off refreshes + bx lr +sdrc_syscfg: + .word SDRC_SYSCONFIG_P +sdrc_mr_0: + .word SDRC_MR_0_P +sdrc_emr2_0: + .word SDRC_EMR2_0_P +sdrc_manual_0: + .word SDRC_MANUAL_0_P +sdrc_mr_1: + .word SDRC_MR_1_P +sdrc_emr2_1: + .word SDRC_EMR2_1_P +sdrc_manual_1: + .word SDRC_MANUAL_1_P +ENTRY(es3_sdrc_fix_sz) + .word . - es3_sdrc_fix + +/* Function to call rom code to save secure ram context */ +ENTRY(save_secure_ram_context) + stmfd sp!, {r1-r12, lr} @ save registers on stack +save_secure_ram_debug: + /* b save_secure_ram_debug */ @ enable to debug save code + adr r3, api_params @ r3 points to parameters + str r0, [r3,#0x4] @ r0 has sdram address + ldr r12, high_mask + and r3, r3, r12 + ldr r12, sram_phy_addr_mask + orr r3, r3, r12 + mov r0, #25 @ set service ID for PPA + mov r12, r0 @ copy secure service ID in r12 + mov r1, #0 @ set task id for ROM code in r1 + mov r2, #4 @ set some flags in r2, r6 + mov r6, #0xff + mcr p15, 0, r0, c7, c10, 4 @ data write barrier + mcr p15, 0, r0, c7, c10, 5 @ data memory barrier + .word 0xE1600071 @ call SMI monitor (smi #1) + nop + nop + nop + nop + ldmfd sp!, {r1-r12, pc} +sram_phy_addr_mask: + .word SRAM_BASE_P +high_mask: + .word 0xffff +api_params: + .word 0x4, 0x0, 0x0, 0x1, 0x1 +ENTRY(save_secure_ram_context_sz) + .word . - save_secure_ram_context + /* * Forces OMAP into idle state * @@ -92,11 +191,29 @@ loop: nop nop nop - bl i_dll_wait + bl wait_sdrc_ok ldmfd sp!, {r0-r12, pc} @ restore regs and return +restore_es3: + /*b restore_es3*/ @ Enable to debug restore code + ldr r5, pm_prepwstst_core_p + ldr r4, [r5] + and r4, r4, #0x3 + cmp r4, #0x0 @ Check if previous power state of CORE is OFF + bne restore + adr r0, es3_sdrc_fix + ldr r1, sram_base + ldr r2, es3_sdrc_fix_sz + mov r2, r2, ror #2 +copy_to_sram: + ldmia r0!, {r3} @ val = *src + stmia r1!, {r3} @ *dst = val + subs r2, r2, #0x1 @ num_words-- + bne copy_to_sram + ldr r1, sram_base + blx r1 restore: - /* b restore*/ @ Enable to debug restore code + /* b restore*/ @ Enable to debug restore code /* Check what was the reason for mpu reset and store the reason in r9*/ /* 1 - Only L1 and logic lost */ /* 2 - Only L2 lost - In this case, we wont be here */ @@ -108,9 +225,44 @@ restore: moveq r9, #0x3 @ MPU OFF => L1 and L2 lost movne r9, #0x1 @ Only L1 and L2 lost => avoid L2 invalidation bne logic_l1_restore + ldr r0, control_stat + ldr r1, [r0] + and r1, #0x700 + cmp r1, #0x300 + beq l2_inv_gp + mov r0, #40 @ set service ID for PPA + mov r12, r0 @ copy secure Service ID in r12 + mov r1, #0 @ set task id for ROM code in r1 + mov r2, #4 @ set some flags in r2, r6 + mov r6, #0xff + adr r3, l2_inv_api_params @ r3 points to dummy parameters + mcr p15, 0, r0, c7, c10, 4 @ data write barrier + mcr p15, 0, r0, c7, c10, 5 @ data memory barrier + .word 0xE1600071 @ call SMI monitor (smi #1) + /* Write to Aux control register to set some bits */ + mov r0, #42 @ set service ID for PPA + mov r12, r0 @ copy secure Service ID in r12 + mov r1, #0 @ set task id for ROM code in r1 + mov r2, #4 @ set some flags in r2, r6 + mov r6, #0xff + adr r3, write_aux_control_params @ r3 points to parameters + mcr p15, 0, r0, c7, c10, 4 @ data write barrier + mcr p15, 0, r0, c7, c10, 5 @ data memory barrier + .word 0xE1600071 @ call SMI monitor (smi #1) + + b logic_l1_restore +l2_inv_api_params: + .word 0x1, 0x00 +write_aux_control_params: + .word 0x1, 0x72 +l2_inv_gp: /* Execute smi to invalidate L2 cache */ mov r12, #0x1 @ set up to invalide L2 -smi: .word 0xE1600070 @ Call SMI monitor (smieq) +smi: .word 0xE1600070 @ Call SMI monitor (smieq) + /* Write to Aux control register to set some bits */ + mov r0, #0x72 + mov r12, #0x3 + .word 0xE1600070 @ Call SMI monitor (smieq) logic_l1_restore: mov r1, #0 /* Invalidate all instruction caches to PoU @@ -391,33 +543,55 @@ skip_l2_inval: nop nop nop - bl i_dll_wait + bl wait_sdrc_ok /* restore regs and return */ ldmfd sp!, {r0-r12, pc} -i_dll_wait: - ldr r4, clk_stabilize_delay +/* Make sure SDRC accesses are ok */ +wait_sdrc_ok: + ldr r4, cm_idlest1_core + ldr r5, [r4] + and r5, r5, #0x2 + cmp r5, #0 + bne wait_sdrc_ok + ldr r4, sdrc_power + ldr r5, [r4] + bic r5, r5, #0x40 + str r5, [r4] +wait_dll_lock: + /* Is dll in lock mode? */ + ldr r4, sdrc_dlla_ctrl + ldr r5, [r4] + tst r5, #0x4 + bxne lr + /* wait till dll locks */ + ldr r4, sdrc_dlla_status + ldr r5, [r4] + and r5, r5, #0x4 + cmp r5, #0x4 + bne wait_dll_lock + bx lr -i_dll_delay: - subs r4, r4, #0x1 - bne i_dll_delay - ldr r4, sdrc_power - ldr r5, [r4] - bic r5, r5, #0x40 - str r5, [r4] - bx lr +cm_idlest1_core: + .word CM_IDLEST1_CORE_V +sdrc_dlla_status: + .word SDRC_DLLA_STATUS_V +sdrc_dlla_ctrl: + .word SDRC_DLLA_CTRL_V pm_prepwstst_core: .word PM_PREPWSTST_CORE_V +pm_prepwstst_core_p: + .word PM_PREPWSTST_CORE_P pm_prepwstst_mpu: .word PM_PREPWSTST_MPU_V pm_pwstctrl_mpu: .word PM_PWSTCTRL_MPU_P scratchpad_base: .word SCRATCHPAD_BASE_P +sram_base: + .word SRAM_BASE_P + 0x8000 sdrc_power: .word SDRC_POWER_V -context_mem: - .word 0x803E3E14 clk_stabilize_delay: .word 0x000001FF assoc_mask: @@ -432,5 +606,7 @@ table_entry: .word 0x00000C02 cache_pred_disable_mask: .word 0xFFFFE7FB +control_stat: + .word CONTROL_STAT ENTRY(omap34xx_cpu_suspend_sz) .word . - omap34xx_cpu_suspend diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S index 9b62208658bc..92e6e1a12af8 100644 --- a/arch/arm/mach-omap2/sram242x.S +++ b/arch/arm/mach-omap2/sram242x.S @@ -128,7 +128,7 @@ omap242x_sdi_prcm_voltctrl: prcm_mask_val: .word 0xFFFF3FFC omap242x_sdi_timer_32ksynct_cr: - .word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010) + .word OMAP2_L4_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010) ENTRY(omap242x_sram_ddr_init_sz) .word . - omap242x_sram_ddr_init @@ -224,7 +224,7 @@ omap242x_srs_prcm_voltctrl: ddr_prcm_mask_val: .word 0xFFFF3FFC omap242x_srs_timer_32ksynct: - .word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010) + .word OMAP2_L4_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010) ENTRY(omap242x_sram_reprogram_sdrc_sz) .word . - omap242x_sram_reprogram_sdrc diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S index df2cd9277c00..ab4973695c71 100644 --- a/arch/arm/mach-omap2/sram243x.S +++ b/arch/arm/mach-omap2/sram243x.S @@ -128,7 +128,7 @@ omap243x_sdi_prcm_voltctrl: prcm_mask_val: .word 0xFFFF3FFC omap243x_sdi_timer_32ksynct_cr: - .word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010) + .word OMAP2_L4_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010) ENTRY(omap243x_sram_ddr_init_sz) .word . - omap243x_sram_ddr_init @@ -224,7 +224,7 @@ omap243x_srs_prcm_voltctrl: ddr_prcm_mask_val: .word 0xFFFF3FFC omap243x_srs_timer_32ksynct: - .word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010) + .word OMAP2_L4_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010) ENTRY(omap243x_sram_reprogram_sdrc_sz) .word . - omap243x_sram_reprogram_sdrc diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index e2338c0aebcf..cd04deaa88c5 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -37,7 +37,7 @@ #include <linux/clockchips.h> #include <asm/mach/time.h> -#include <mach/dmtimer.h> +#include <plat/dmtimer.h> #include <asm/localtimer.h> /* MAX_GPTIMER_ID: number of GPTIMERs on the chip */ @@ -47,6 +47,7 @@ static struct omap_dm_timer *gptimer; static struct clock_event_device clockevent_gpt; static u8 __initdata gptimer_id = 1; static u8 __initdata inited; +struct omap_dm_timer *gptimer_wakeup; static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id) { @@ -134,6 +135,7 @@ static void __init omap2_gp_clockevent_init(void) gptimer = omap_dm_timer_request_specific(gptimer_id); BUG_ON(gptimer == NULL); + gptimer_wakeup = gptimer; #if defined(CONFIG_OMAP_32K_TIMER) src = OMAP_TIMER_SRC_32_KHZ; @@ -231,7 +233,8 @@ static void __init omap2_gp_clocksource_init(void) static void __init omap2_gp_timer_init(void) { #ifdef CONFIG_LOCAL_TIMERS - twd_base = OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE); + twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_256); + BUG_ON(!twd_base); #endif omap_dm_timer_init(); diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 1145a2562b0f..a80441dd19b8 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -28,8 +28,8 @@ #include <mach/hardware.h> #include <mach/irqs.h> -#include <mach/mux.h> -#include <mach/usb.h> +#include <plat/mux.h> +#include <plat/usb.h> #ifdef CONFIG_USB_MUSB_SOC diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 8622c24cd270..10a2013c1104 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -16,8 +16,8 @@ #include <linux/usb/musb.h> -#include <mach/gpmc.h> -#include <mach/mux.h> +#include <plat/gpmc.h> +#include <plat/mux.h> static u8 async_cs, sync_cs; diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index bf880e966d3b..681bfc37ebb2 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -24,7 +24,7 @@ #include <linux/debugfs.h> #include <linux/io.h> -#include <mach/clock.h> +#include <plat/clock.h> static LIST_HEAD(clocks); static DEFINE_MUTEX(clocks_mutex); diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 3a4768d55895..cc050b3313bd 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -29,13 +29,13 @@ #include <asm/mach/map.h> #include <asm/setup.h> -#include <mach/common.h> -#include <mach/board.h> -#include <mach/control.h> -#include <mach/mux.h> -#include <mach/fpga.h> +#include <plat/common.h> +#include <plat/board.h> +#include <plat/control.h> +#include <plat/mux.h> +#include <plat/fpga.h> -#include <mach/clock.h> +#include <plat/clock.h> #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) # include "../mach-omap2/sdrc.h" @@ -49,6 +49,9 @@ int omap_bootloader_tag_len; struct omap_board_config_kernel *omap_board_config; int omap_board_config_size; +/* used by omap-smp.c and board-4430sdp.c */ +void __iomem *gic_cpu_base_addr; + static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out) { struct omap_board_config_kernel *kinfo = NULL; @@ -224,12 +227,12 @@ static void __init __omap2_set_globals(struct omap_globals *omap2_globals) static struct omap_globals omap242x_globals = { .class = OMAP242X_CLASS, - .tap = OMAP2_IO_ADDRESS(0x48014000), - .sdrc = OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE), - .sms = OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE), - .ctrl = OMAP2_IO_ADDRESS(OMAP2420_CTRL_BASE), - .prm = OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE), - .cm = OMAP2_IO_ADDRESS(OMAP2420_CM_BASE), + .tap = OMAP2_L4_IO_ADDRESS(0x48014000), + .sdrc = OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE), + .sms = OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE), + .ctrl = OMAP2_L4_IO_ADDRESS(OMAP2420_CTRL_BASE), + .prm = OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE), + .cm = OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE), }; void __init omap2_set_globals_242x(void) @@ -242,12 +245,12 @@ void __init omap2_set_globals_242x(void) static struct omap_globals omap243x_globals = { .class = OMAP243X_CLASS, - .tap = OMAP2_IO_ADDRESS(0x4900a000), - .sdrc = OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE), - .sms = OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE), - .ctrl = OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE), - .prm = OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE), - .cm = OMAP2_IO_ADDRESS(OMAP2430_CM_BASE), + .tap = OMAP2_L4_IO_ADDRESS(0x4900a000), + .sdrc = OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE), + .sms = OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE), + .ctrl = OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE), + .prm = OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE), + .cm = OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE), }; void __init omap2_set_globals_243x(void) @@ -260,12 +263,12 @@ void __init omap2_set_globals_243x(void) static struct omap_globals omap343x_globals = { .class = OMAP343X_CLASS, - .tap = OMAP2_IO_ADDRESS(0x4830A000), - .sdrc = OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE), - .sms = OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE), - .ctrl = OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE), - .prm = OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE), - .cm = OMAP2_IO_ADDRESS(OMAP3430_CM_BASE), + .tap = OMAP2_L4_IO_ADDRESS(0x4830A000), + .sdrc = OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE), + .sms = OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE), + .ctrl = OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE), + .prm = OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE), + .cm = OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE), }; void __init omap2_set_globals_343x(void) @@ -277,10 +280,10 @@ void __init omap2_set_globals_343x(void) #if defined(CONFIG_ARCH_OMAP4) static struct omap_globals omap4_globals = { .class = OMAP443X_CLASS, - .tap = OMAP2_IO_ADDRESS(0x4830a000), - .ctrl = OMAP2_IO_ADDRESS(OMAP443X_CTRL_BASE), - .prm = OMAP2_IO_ADDRESS(OMAP4430_PRM_BASE), - .cm = OMAP2_IO_ADDRESS(OMAP4430_CM_BASE), + .tap = OMAP2_L4_IO_ADDRESS(0x4830a000), + .ctrl = OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE), + .prm = OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE), + .cm = OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE), }; void __init omap2_set_globals_443x(void) diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c index 341235c278ac..f8ddbdd8b076 100644 --- a/arch/arm/plat-omap/cpu-omap.c +++ b/arch/arm/plat-omap/cpu-omap.c @@ -23,7 +23,7 @@ #include <linux/io.h> #include <mach/hardware.h> -#include <mach/clock.h> +#include <plat/clock.h> #include <asm/system.h> #define VERY_HI_RATE 900000000 diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c index f6684832ca8f..09c1107637f6 100644 --- a/arch/arm/plat-omap/debug-devices.c +++ b/arch/arm/plat-omap/debug-devices.c @@ -16,7 +16,7 @@ #include <mach/hardware.h> -#include <mach/board.h> +#include <plat/board.h> #include <mach/gpio.h> diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c index 9395898dd49a..6c768b71ad64 100644 --- a/arch/arm/plat-omap/debug-leds.c +++ b/arch/arm/plat-omap/debug-leds.c @@ -18,7 +18,7 @@ #include <asm/system.h> #include <asm/mach-types.h> -#include <mach/fpga.h> +#include <plat/fpga.h> #include <mach/gpio.h> diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index a64b692a1bfe..f86617869b38 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -19,15 +19,15 @@ #include <asm/mach-types.h> #include <asm/mach/map.h> -#include <mach/tc.h> -#include <mach/control.h> -#include <mach/board.h> -#include <mach/mmc.h> -#include <mach/mux.h> +#include <plat/tc.h> +#include <plat/control.h> +#include <plat/board.h> +#include <plat/mmc.h> +#include <plat/mux.h> #include <mach/gpio.h> -#include <mach/menelaus.h> -#include <mach/mcbsp.h> -#include <mach/dsp_common.h> +#include <plat/menelaus.h> +#include <plat/mcbsp.h> +#include <plat/dsp_common.h> #if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE) @@ -113,17 +113,17 @@ static void omap_init_kp(void) omap_cfg_reg(E19_1610_KBR4); omap_cfg_reg(N19_1610_KBR5); } else if (machine_is_omap_perseus2() || machine_is_omap_fsample()) { - omap_cfg_reg(E2_730_KBR0); - omap_cfg_reg(J7_730_KBR1); - omap_cfg_reg(E1_730_KBR2); - omap_cfg_reg(F3_730_KBR3); - omap_cfg_reg(D2_730_KBR4); - - omap_cfg_reg(C2_730_KBC0); - omap_cfg_reg(D3_730_KBC1); - omap_cfg_reg(E4_730_KBC2); - omap_cfg_reg(F4_730_KBC3); - omap_cfg_reg(E3_730_KBC4); + omap_cfg_reg(E2_7XX_KBR0); + omap_cfg_reg(J7_7XX_KBR1); + omap_cfg_reg(E1_7XX_KBR2); + omap_cfg_reg(F3_7XX_KBR3); + omap_cfg_reg(D2_7XX_KBR4); + + omap_cfg_reg(C2_7XX_KBC0); + omap_cfg_reg(D3_7XX_KBC1); + omap_cfg_reg(E4_7XX_KBC2); + omap_cfg_reg(F4_7XX_KBC3); + omap_cfg_reg(E3_7XX_KBC4); } else if (machine_is_omap_h4()) { omap_cfg_reg(T19_24XX_KBR0); omap_cfg_reg(R19_24XX_KBR1); diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 68eaae324b6a..be4ce070fb4c 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -32,9 +32,9 @@ #include <asm/system.h> #include <mach/hardware.h> -#include <mach/dma.h> +#include <plat/dma.h> -#include <mach/tc.h> +#include <plat/tc.h> #undef DEBUG @@ -54,6 +54,12 @@ enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED }; static int enable_1510_mode; +static struct omap_dma_global_context_registers { + u32 dma_irqenable_l0; + u32 dma_ocp_sysconfig; + u32 dma_gcr; +} omap_dma_global_context; + struct omap_dma_lch { int next_lch; int dev_id; @@ -2355,44 +2361,83 @@ void omap_stop_lcd_dma(void) } EXPORT_SYMBOL(omap_stop_lcd_dma); +void omap_dma_global_context_save(void) +{ + omap_dma_global_context.dma_irqenable_l0 = + dma_read(IRQENABLE_L0); + omap_dma_global_context.dma_ocp_sysconfig = + dma_read(OCP_SYSCONFIG); + omap_dma_global_context.dma_gcr = dma_read(GCR); +} + +void omap_dma_global_context_restore(void) +{ + int ch; + + dma_write(omap_dma_global_context.dma_gcr, GCR); + dma_write(omap_dma_global_context.dma_ocp_sysconfig, + OCP_SYSCONFIG); + dma_write(omap_dma_global_context.dma_irqenable_l0, + IRQENABLE_L0); + + /* + * A bug in ROM code leaves IRQ status for channels 0 and 1 uncleared + * after secure sram context save and restore. Hence we need to + * manually clear those IRQs to avoid spurious interrupts. This + * affects only secure devices. + */ + if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP)) + dma_write(0x3 , IRQSTATUS_L0); + + for (ch = 0; ch < dma_chan_count; ch++) + if (dma_chan[ch].dev_id != -1) + omap_clear_dma(ch); +} + /*----------------------------------------------------------------------------*/ static int __init omap_init_dma(void) { + unsigned long base; int ch, r; if (cpu_class_is_omap1()) { - omap_dma_base = OMAP1_IO_ADDRESS(OMAP1_DMA_BASE); + base = OMAP1_DMA_BASE; dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT; } else if (cpu_is_omap24xx()) { - omap_dma_base = OMAP2_IO_ADDRESS(OMAP24XX_DMA4_BASE); + base = OMAP24XX_DMA4_BASE; dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT; } else if (cpu_is_omap34xx()) { - omap_dma_base = OMAP2_IO_ADDRESS(OMAP34XX_DMA4_BASE); + base = OMAP34XX_DMA4_BASE; dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT; } else if (cpu_is_omap44xx()) { - omap_dma_base = OMAP2_IO_ADDRESS(OMAP44XX_DMA4_BASE); + base = OMAP44XX_DMA4_BASE; dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT; } else { pr_err("DMA init failed for unsupported omap\n"); return -ENODEV; } + omap_dma_base = ioremap(base, SZ_4K); + BUG_ON(!omap_dma_base); + if (cpu_class_is_omap2() && omap_dma_reserve_channels && (omap_dma_reserve_channels <= dma_lch_count)) dma_lch_count = omap_dma_reserve_channels; dma_chan = kzalloc(sizeof(struct omap_dma_lch) * dma_lch_count, GFP_KERNEL); - if (!dma_chan) - return -ENOMEM; + if (!dma_chan) { + r = -ENOMEM; + goto out_unmap; + } if (cpu_class_is_omap2()) { dma_linked_lch = kzalloc(sizeof(struct dma_link_info) * dma_lch_count, GFP_KERNEL); if (!dma_linked_lch) { - kfree(dma_chan); - return -ENOMEM; + r = -ENOMEM; + goto out_free; } } @@ -2466,7 +2511,7 @@ static int __init omap_init_dma(void) for (i = 0; i < ch; i++) free_irq(omap1_dma_irq[i], (void *) (i + 1)); - return r; + goto out_free; } } } @@ -2484,8 +2529,8 @@ static int __init omap_init_dma(void) setup_irq(irq, &omap24xx_dma_irq); } - /* Enable smartidle idlemodes and autoidle */ if (cpu_is_omap34xx()) { + /* Enable smartidle idlemodes and autoidle */ u32 v = dma_read(OCP_SYSCONFIG); v &= ~(DMA_SYSCONFIG_MIDLEMODE_MASK | DMA_SYSCONFIG_SIDLEMODE_MASK | @@ -2494,6 +2539,13 @@ static int __init omap_init_dma(void) DMA_SYSCONFIG_SIDLEMODE(DMA_IDLEMODE_SMARTIDLE) | DMA_SYSCONFIG_AUTOIDLE); dma_write(v , OCP_SYSCONFIG); + /* reserve dma channels 0 and 1 in high security devices */ + if (omap_type() != OMAP2_DEVICE_TYPE_GP) { + printk(KERN_INFO "Reserving DMA channels 0 and 1 for " + "HS ROM code\n"); + dma_chan[0].dev_id = 0; + dma_chan[1].dev_id = 1; + } } @@ -2508,11 +2560,19 @@ static int __init omap_init_dma(void) "(error %d)\n", r); for (i = 0; i < dma_chan_count; i++) free_irq(omap1_dma_irq[i], (void *) (i + 1)); - return r; + goto out_free; } } return 0; + +out_free: + kfree(dma_chan); + +out_unmap: + iounmap(omap_dma_base); + + return r; } arch_initcall(omap_init_dma); diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index d325b54daeb5..64f407ee0f4e 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -38,7 +38,7 @@ #include <linux/io.h> #include <linux/module.h> #include <mach/hardware.h> -#include <mach/dmtimer.h> +#include <plat/dmtimer.h> #include <mach/irqs.h> /* register offsets */ @@ -742,16 +742,17 @@ EXPORT_SYMBOL_GPL(omap_dm_timers_active); int __init omap_dm_timer_init(void) { struct omap_dm_timer *timer; - int i; + int i, map_size = SZ_8K; /* Module 4KB + L4 4KB except on omap1 */ if (!(cpu_is_omap16xx() || cpu_class_is_omap2())) return -ENODEV; spin_lock_init(&dm_timer_lock); - if (cpu_class_is_omap1()) + if (cpu_class_is_omap1()) { dm_timers = omap1_dm_timers; - else if (cpu_is_omap24xx()) { + map_size = SZ_2K; + } else if (cpu_is_omap24xx()) { dm_timers = omap2_dm_timers; dm_source_names = omap2_dm_source_names; dm_source_clocks = omap2_dm_source_clocks; @@ -774,10 +775,11 @@ int __init omap_dm_timer_init(void) for (i = 0; i < dm_timer_count; i++) { timer = &dm_timers[i]; - if (cpu_class_is_omap1()) - timer->io_base = OMAP1_IO_ADDRESS(timer->phys_base); - else - timer->io_base = OMAP2_IO_ADDRESS(timer->phys_base); + + /* Static mapping, never released */ + timer->io_base = ioremap(timer->phys_base, map_size); + BUG_ON(!timer->io_base); + #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ defined(CONFIG_ARCH_OMAP4) if (cpu_class_is_omap2()) { diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index 3746222bed10..78a4ce538dbd 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -32,9 +32,9 @@ #include <mach/hardware.h> #include <asm/mach/map.h> -#include <mach/board.h> -#include <mach/sram.h> -#include <mach/omapfb.h> +#include <plat/board.h> +#include <plat/sram.h> +#include <plat/omapfb.h> #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 7c345b757df1..4f81ea35b733 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -31,7 +31,7 @@ /* * OMAP1510 GPIO registers */ -#define OMAP1510_GPIO_BASE OMAP1_IO_ADDRESS(0xfffce000) +#define OMAP1510_GPIO_BASE 0xfffce000 #define OMAP1510_GPIO_DATA_INPUT 0x00 #define OMAP1510_GPIO_DATA_OUTPUT 0x04 #define OMAP1510_GPIO_DIR_CONTROL 0x08 @@ -45,10 +45,10 @@ /* * OMAP1610 specific GPIO registers */ -#define OMAP1610_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbe400) -#define OMAP1610_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbec00) -#define OMAP1610_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbb400) -#define OMAP1610_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbbc00) +#define OMAP1610_GPIO1_BASE 0xfffbe400 +#define OMAP1610_GPIO2_BASE 0xfffbec00 +#define OMAP1610_GPIO3_BASE 0xfffbb400 +#define OMAP1610_GPIO4_BASE 0xfffbbc00 #define OMAP1610_GPIO_REVISION 0x0000 #define OMAP1610_GPIO_SYSCONFIG 0x0010 #define OMAP1610_GPIO_SYSSTATUS 0x0014 @@ -68,52 +68,36 @@ #define OMAP1610_GPIO_SET_DATAOUT 0x00f0 /* - * OMAP730 specific GPIO registers + * OMAP7XX specific GPIO registers */ -#define OMAP730_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbc000) -#define OMAP730_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbc800) -#define OMAP730_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbd000) -#define OMAP730_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbd800) -#define OMAP730_GPIO5_BASE OMAP1_IO_ADDRESS(0xfffbe000) -#define OMAP730_GPIO6_BASE OMAP1_IO_ADDRESS(0xfffbe800) -#define OMAP730_GPIO_DATA_INPUT 0x00 -#define OMAP730_GPIO_DATA_OUTPUT 0x04 -#define OMAP730_GPIO_DIR_CONTROL 0x08 -#define OMAP730_GPIO_INT_CONTROL 0x0c -#define OMAP730_GPIO_INT_MASK 0x10 -#define OMAP730_GPIO_INT_STATUS 0x14 - -/* - * OMAP850 specific GPIO registers - */ -#define OMAP850_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbc000) -#define OMAP850_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbc800) -#define OMAP850_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbd000) -#define OMAP850_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbd800) -#define OMAP850_GPIO5_BASE OMAP1_IO_ADDRESS(0xfffbe000) -#define OMAP850_GPIO6_BASE OMAP1_IO_ADDRESS(0xfffbe800) -#define OMAP850_GPIO_DATA_INPUT 0x00 -#define OMAP850_GPIO_DATA_OUTPUT 0x04 -#define OMAP850_GPIO_DIR_CONTROL 0x08 -#define OMAP850_GPIO_INT_CONTROL 0x0c -#define OMAP850_GPIO_INT_MASK 0x10 -#define OMAP850_GPIO_INT_STATUS 0x14 - -#define OMAP1_MPUIO_VBASE OMAP1_IO_ADDRESS(OMAP1_MPUIO_BASE) +#define OMAP7XX_GPIO1_BASE 0xfffbc000 +#define OMAP7XX_GPIO2_BASE 0xfffbc800 +#define OMAP7XX_GPIO3_BASE 0xfffbd000 +#define OMAP7XX_GPIO4_BASE 0xfffbd800 +#define OMAP7XX_GPIO5_BASE 0xfffbe000 +#define OMAP7XX_GPIO6_BASE 0xfffbe800 +#define OMAP7XX_GPIO_DATA_INPUT 0x00 +#define OMAP7XX_GPIO_DATA_OUTPUT 0x04 +#define OMAP7XX_GPIO_DIR_CONTROL 0x08 +#define OMAP7XX_GPIO_INT_CONTROL 0x0c +#define OMAP7XX_GPIO_INT_MASK 0x10 +#define OMAP7XX_GPIO_INT_STATUS 0x14 + +#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE /* * omap24xx specific GPIO registers */ -#define OMAP242X_GPIO1_BASE OMAP2_IO_ADDRESS(0x48018000) -#define OMAP242X_GPIO2_BASE OMAP2_IO_ADDRESS(0x4801a000) -#define OMAP242X_GPIO3_BASE OMAP2_IO_ADDRESS(0x4801c000) -#define OMAP242X_GPIO4_BASE OMAP2_IO_ADDRESS(0x4801e000) +#define OMAP242X_GPIO1_BASE 0x48018000 +#define OMAP242X_GPIO2_BASE 0x4801a000 +#define OMAP242X_GPIO3_BASE 0x4801c000 +#define OMAP242X_GPIO4_BASE 0x4801e000 -#define OMAP243X_GPIO1_BASE OMAP2_IO_ADDRESS(0x4900C000) -#define OMAP243X_GPIO2_BASE OMAP2_IO_ADDRESS(0x4900E000) -#define OMAP243X_GPIO3_BASE OMAP2_IO_ADDRESS(0x49010000) -#define OMAP243X_GPIO4_BASE OMAP2_IO_ADDRESS(0x49012000) -#define OMAP243X_GPIO5_BASE OMAP2_IO_ADDRESS(0x480B6000) +#define OMAP243X_GPIO1_BASE 0x4900C000 +#define OMAP243X_GPIO2_BASE 0x4900E000 +#define OMAP243X_GPIO3_BASE 0x49010000 +#define OMAP243X_GPIO4_BASE 0x49012000 +#define OMAP243X_GPIO5_BASE 0x480B6000 #define OMAP24XX_GPIO_REVISION 0x0000 #define OMAP24XX_GPIO_SYSCONFIG 0x0010 @@ -170,24 +154,25 @@ * omap34xx specific GPIO registers */ -#define OMAP34XX_GPIO1_BASE OMAP2_IO_ADDRESS(0x48310000) -#define OMAP34XX_GPIO2_BASE OMAP2_IO_ADDRESS(0x49050000) -#define OMAP34XX_GPIO3_BASE OMAP2_IO_ADDRESS(0x49052000) -#define OMAP34XX_GPIO4_BASE OMAP2_IO_ADDRESS(0x49054000) -#define OMAP34XX_GPIO5_BASE OMAP2_IO_ADDRESS(0x49056000) -#define OMAP34XX_GPIO6_BASE OMAP2_IO_ADDRESS(0x49058000) +#define OMAP34XX_GPIO1_BASE 0x48310000 +#define OMAP34XX_GPIO2_BASE 0x49050000 +#define OMAP34XX_GPIO3_BASE 0x49052000 +#define OMAP34XX_GPIO4_BASE 0x49054000 +#define OMAP34XX_GPIO5_BASE 0x49056000 +#define OMAP34XX_GPIO6_BASE 0x49058000 /* * OMAP44XX specific GPIO registers */ -#define OMAP44XX_GPIO1_BASE OMAP2_IO_ADDRESS(0x4a310000) -#define OMAP44XX_GPIO2_BASE OMAP2_IO_ADDRESS(0x48055000) -#define OMAP44XX_GPIO3_BASE OMAP2_IO_ADDRESS(0x48057000) -#define OMAP44XX_GPIO4_BASE OMAP2_IO_ADDRESS(0x48059000) -#define OMAP44XX_GPIO5_BASE OMAP2_IO_ADDRESS(0x4805B000) -#define OMAP44XX_GPIO6_BASE OMAP2_IO_ADDRESS(0x4805D000) +#define OMAP44XX_GPIO1_BASE 0x4a310000 +#define OMAP44XX_GPIO2_BASE 0x48055000 +#define OMAP44XX_GPIO3_BASE 0x48057000 +#define OMAP44XX_GPIO4_BASE 0x48059000 +#define OMAP44XX_GPIO5_BASE 0x4805B000 +#define OMAP44XX_GPIO6_BASE 0x4805D000 struct gpio_bank { + unsigned long pbase; void __iomem *base; u16 irq; u16 virtual_irq_start; @@ -215,96 +200,128 @@ struct gpio_bank { #define METHOD_MPUIO 0 #define METHOD_GPIO_1510 1 #define METHOD_GPIO_1610 2 -#define METHOD_GPIO_730 3 -#define METHOD_GPIO_850 4 +#define METHOD_GPIO_7XX 3 #define METHOD_GPIO_24XX 5 #ifdef CONFIG_ARCH_OMAP16XX static struct gpio_bank gpio_bank_1610[5] = { - { OMAP1_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO}, - { OMAP1610_GPIO1_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1610 }, - { OMAP1610_GPIO2_BASE, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, METHOD_GPIO_1610 }, - { OMAP1610_GPIO3_BASE, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, METHOD_GPIO_1610 }, - { OMAP1610_GPIO4_BASE, INT_1610_GPIO_BANK4, IH_GPIO_BASE + 48, METHOD_GPIO_1610 }, + { OMAP1_MPUIO_VBASE, NULL, INT_MPUIO, IH_MPUIO_BASE, + METHOD_MPUIO }, + { OMAP1610_GPIO1_BASE, NULL, INT_GPIO_BANK1, IH_GPIO_BASE, + METHOD_GPIO_1610 }, + { OMAP1610_GPIO2_BASE, NULL, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, + METHOD_GPIO_1610 }, + { OMAP1610_GPIO3_BASE, NULL, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, + METHOD_GPIO_1610 }, + { OMAP1610_GPIO4_BASE, NULL, INT_1610_GPIO_BANK4, IH_GPIO_BASE + 48, + METHOD_GPIO_1610 }, }; #endif #ifdef CONFIG_ARCH_OMAP15XX static struct gpio_bank gpio_bank_1510[2] = { - { OMAP1_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, - { OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1510 } + { OMAP1_MPUIO_VBASE, NULL, INT_MPUIO, IH_MPUIO_BASE, + METHOD_MPUIO }, + { OMAP1510_GPIO_BASE, NULL, INT_GPIO_BANK1, IH_GPIO_BASE, + METHOD_GPIO_1510 } }; #endif -#ifdef CONFIG_ARCH_OMAP730 -static struct gpio_bank gpio_bank_730[7] = { - { OMAP1_MPUIO_VBASE, INT_730_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, - { OMAP730_GPIO1_BASE, INT_730_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_730 }, - { OMAP730_GPIO2_BASE, INT_730_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_730 }, - { OMAP730_GPIO3_BASE, INT_730_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_730 }, - { OMAP730_GPIO4_BASE, INT_730_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_730 }, - { OMAP730_GPIO5_BASE, INT_730_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_730 }, - { OMAP730_GPIO6_BASE, INT_730_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_730 }, +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) +static struct gpio_bank gpio_bank_7xx[7] = { + { OMAP1_MPUIO_VBASE, NULL, INT_7XX_MPUIO, IH_MPUIO_BASE, + METHOD_MPUIO }, + { OMAP7XX_GPIO1_BASE, NULL, INT_7XX_GPIO_BANK1, IH_GPIO_BASE, + METHOD_GPIO_7XX }, + { OMAP7XX_GPIO2_BASE, NULL, INT_7XX_GPIO_BANK2, IH_GPIO_BASE + 32, + METHOD_GPIO_7XX }, + { OMAP7XX_GPIO3_BASE, NULL, INT_7XX_GPIO_BANK3, IH_GPIO_BASE + 64, + METHOD_GPIO_7XX }, + { OMAP7XX_GPIO4_BASE, NULL, INT_7XX_GPIO_BANK4, IH_GPIO_BASE + 96, + METHOD_GPIO_7XX }, + { OMAP7XX_GPIO5_BASE, NULL, INT_7XX_GPIO_BANK5, IH_GPIO_BASE + 128, + METHOD_GPIO_7XX }, + { OMAP7XX_GPIO6_BASE, NULL, INT_7XX_GPIO_BANK6, IH_GPIO_BASE + 160, + METHOD_GPIO_7XX }, }; #endif -#ifdef CONFIG_ARCH_OMAP850 -static struct gpio_bank gpio_bank_850[7] = { - { OMAP1_MPUIO_VBASE, INT_850_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, - { OMAP850_GPIO1_BASE, INT_850_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_850 }, - { OMAP850_GPIO2_BASE, INT_850_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_850 }, - { OMAP850_GPIO3_BASE, INT_850_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_850 }, - { OMAP850_GPIO4_BASE, INT_850_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_850 }, - { OMAP850_GPIO5_BASE, INT_850_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_850 }, - { OMAP850_GPIO6_BASE, INT_850_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_850 }, -}; -#endif - - #ifdef CONFIG_ARCH_OMAP24XX static struct gpio_bank gpio_bank_242x[4] = { - { OMAP242X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX }, - { OMAP242X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX }, - { OMAP242X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX }, - { OMAP242X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX }, + { OMAP242X_GPIO1_BASE, NULL, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, + METHOD_GPIO_24XX }, + { OMAP242X_GPIO2_BASE, NULL, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, + METHOD_GPIO_24XX }, + { OMAP242X_GPIO3_BASE, NULL, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, + METHOD_GPIO_24XX }, + { OMAP242X_GPIO4_BASE, NULL, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, + METHOD_GPIO_24XX }, }; static struct gpio_bank gpio_bank_243x[5] = { - { OMAP243X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX }, - { OMAP243X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX }, - { OMAP243X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX }, - { OMAP243X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX }, - { OMAP243X_GPIO5_BASE, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX }, + { OMAP243X_GPIO1_BASE, NULL, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, + METHOD_GPIO_24XX }, + { OMAP243X_GPIO2_BASE, NULL, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, + METHOD_GPIO_24XX }, + { OMAP243X_GPIO3_BASE, NULL, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, + METHOD_GPIO_24XX }, + { OMAP243X_GPIO4_BASE, NULL, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, + METHOD_GPIO_24XX }, + { OMAP243X_GPIO5_BASE, NULL, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128, + METHOD_GPIO_24XX }, }; #endif #ifdef CONFIG_ARCH_OMAP34XX static struct gpio_bank gpio_bank_34xx[6] = { - { OMAP34XX_GPIO1_BASE, INT_34XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX }, - { OMAP34XX_GPIO2_BASE, INT_34XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX }, - { OMAP34XX_GPIO3_BASE, INT_34XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX }, - { OMAP34XX_GPIO4_BASE, INT_34XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX }, - { OMAP34XX_GPIO5_BASE, INT_34XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX }, - { OMAP34XX_GPIO6_BASE, INT_34XX_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_24XX }, + { OMAP34XX_GPIO1_BASE, NULL, INT_34XX_GPIO_BANK1, IH_GPIO_BASE, + METHOD_GPIO_24XX }, + { OMAP34XX_GPIO2_BASE, NULL, INT_34XX_GPIO_BANK2, IH_GPIO_BASE + 32, + METHOD_GPIO_24XX }, + { OMAP34XX_GPIO3_BASE, NULL, INT_34XX_GPIO_BANK3, IH_GPIO_BASE + 64, + METHOD_GPIO_24XX }, + { OMAP34XX_GPIO4_BASE, NULL, INT_34XX_GPIO_BANK4, IH_GPIO_BASE + 96, + METHOD_GPIO_24XX }, + { OMAP34XX_GPIO5_BASE, NULL, INT_34XX_GPIO_BANK5, IH_GPIO_BASE + 128, + METHOD_GPIO_24XX }, + { OMAP34XX_GPIO6_BASE, NULL, INT_34XX_GPIO_BANK6, IH_GPIO_BASE + 160, + METHOD_GPIO_24XX }, +}; + +struct omap3_gpio_regs { + u32 sysconfig; + u32 irqenable1; + u32 irqenable2; + u32 wake_en; + u32 ctrl; + u32 oe; + u32 leveldetect0; + u32 leveldetect1; + u32 risingdetect; + u32 fallingdetect; + u32 dataout; + u32 setwkuena; + u32 setdataout; }; +static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS]; #endif #ifdef CONFIG_ARCH_OMAP4 static struct gpio_bank gpio_bank_44xx[6] = { - { OMAP44XX_GPIO1_BASE, INT_44XX_GPIO_BANK1, IH_GPIO_BASE, \ + { OMAP44XX_GPIO1_BASE, NULL, INT_44XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX }, - { OMAP44XX_GPIO2_BASE, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32, \ + { OMAP44XX_GPIO2_BASE, NULL, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX }, - { OMAP44XX_GPIO3_BASE, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64, \ + { OMAP44XX_GPIO3_BASE, NULL, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX }, - { OMAP44XX_GPIO4_BASE, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96, \ + { OMAP44XX_GPIO4_BASE, NULL, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX }, - { OMAP44XX_GPIO5_BASE, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128, \ + { OMAP44XX_GPIO5_BASE, NULL, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX }, - { OMAP44XX_GPIO6_BASE, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160, \ + { OMAP44XX_GPIO6_BASE, NULL, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_24XX }, }; @@ -402,14 +419,9 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) reg += OMAP1610_GPIO_DIRECTION; break; #endif -#ifdef CONFIG_ARCH_OMAP730 - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DIR_CONTROL; - break; -#endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DIR_CONTROL; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DIR_CONTROL; break; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) @@ -469,19 +481,9 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) l = 1 << gpio; break; #endif -#ifdef CONFIG_ARCH_OMAP730 - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DATA_OUTPUT; - l = __raw_readl(reg); - if (enable) - l |= 1 << gpio; - else - l &= ~(1 << gpio); - break; -#endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DATA_OUTPUT; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DATA_OUTPUT; l = __raw_readl(reg); if (enable) l |= 1 << gpio; @@ -537,14 +539,9 @@ static int _get_gpio_datain(struct gpio_bank *bank, int gpio) reg += OMAP1610_GPIO_DATAIN; break; #endif -#ifdef CONFIG_ARCH_OMAP730 - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DATA_INPUT; - break; -#endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DATA_INPUT; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DATA_INPUT; break; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) @@ -588,14 +585,9 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio) reg += OMAP1610_GPIO_DATAOUT; break; #endif -#ifdef CONFIG_ARCH_OMAP730 - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DATA_OUTPUT; - break; -#endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DATA_OUTPUT; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DATA_OUTPUT; break; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ @@ -797,21 +789,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA); break; #endif -#ifdef CONFIG_ARCH_OMAP730 - case METHOD_GPIO_730: - reg += OMAP730_GPIO_INT_CONTROL; - l = __raw_readl(reg); - if (trigger & IRQ_TYPE_EDGE_RISING) - l |= 1 << gpio; - else if (trigger & IRQ_TYPE_EDGE_FALLING) - l &= ~(1 << gpio); - else - goto bad; - break; -#endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_INT_CONTROL; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_CONTROL; l = __raw_readl(reg); if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; @@ -897,14 +877,9 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) reg += OMAP1610_GPIO_IRQSTATUS1; break; #endif -#ifdef CONFIG_ARCH_OMAP730 - case METHOD_GPIO_730: - reg += OMAP730_GPIO_INT_STATUS; - break; -#endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_INT_STATUS; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_STATUS; break; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) @@ -971,16 +946,9 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank) mask = 0xffff; break; #endif -#ifdef CONFIG_ARCH_OMAP730 - case METHOD_GPIO_730: - reg += OMAP730_GPIO_INT_MASK; - mask = 0xffffffff; - inv = 1; - break; -#endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_INT_MASK; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_MASK; mask = 0xffffffff; inv = 1; break; @@ -1044,19 +1012,9 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab l = gpio_mask; break; #endif -#ifdef CONFIG_ARCH_OMAP730 - case METHOD_GPIO_730: - reg += OMAP730_GPIO_INT_MASK; - l = __raw_readl(reg); - if (enable) - l &= ~(gpio_mask); - else - l |= gpio_mask; - break; -#endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_INT_MASK; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_MASK; l = __raw_readl(reg); if (enable) l &= ~(gpio_mask); @@ -1249,13 +1207,9 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) if (bank->method == METHOD_GPIO_1610) isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1; #endif -#ifdef CONFIG_ARCH_OMAP730 - if (bank->method == METHOD_GPIO_730) - isr_reg = bank->base + OMAP730_GPIO_INT_STATUS; -#endif -#ifdef CONFIG_ARCH_OMAP850 - if (bank->method == METHOD_GPIO_850) - isr_reg = bank->base + OMAP850_GPIO_INT_STATUS; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + if (bank->method == METHOD_GPIO_7XX) + isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) if (bank->method == METHOD_GPIO_24XX) @@ -1524,11 +1478,8 @@ static int gpio_is_input(struct gpio_bank *bank, int mask) case METHOD_GPIO_1610: reg += OMAP1610_GPIO_DIRECTION; break; - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DIR_CONTROL; - break; - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DIR_CONTROL; + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DIR_CONTROL; break; case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_OE; @@ -1607,6 +1558,23 @@ static struct clk * gpio5_fck; static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS]; #endif +static void __init omap_gpio_show_rev(void) +{ + u32 rev; + + if (cpu_is_omap16xx()) + rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION); + else if (cpu_is_omap24xx() || cpu_is_omap34xx()) + rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); + else if (cpu_is_omap44xx()) + rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION); + else + return; + + printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n", + (rev >> 4) & 0x0f, rev & 0x0f); +} + /* This lock class tells lockdep that GPIO irqs are in a different * category than their parents, so it won't report false recursion. */ @@ -1617,6 +1585,7 @@ static int __init _omap_gpio_init(void) int i; int gpio = 0; struct gpio_bank *bank; + int bank_size = SZ_8K; /* Module 4KB + L4 4KB except on omap1 */ char clk_name[11]; initialized = 1; @@ -1679,77 +1648,45 @@ static int __init _omap_gpio_init(void) #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap15xx()) { - printk(KERN_INFO "OMAP1510 GPIO hardware\n"); gpio_bank_count = 2; gpio_bank = gpio_bank_1510; + bank_size = SZ_2K; } #endif #if defined(CONFIG_ARCH_OMAP16XX) if (cpu_is_omap16xx()) { - u32 rev; - gpio_bank_count = 5; gpio_bank = gpio_bank_1610; - rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION); - printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n", - (rev >> 4) & 0x0f, rev & 0x0f); + bank_size = SZ_2K; } #endif -#ifdef CONFIG_ARCH_OMAP730 - if (cpu_is_omap730()) { - printk(KERN_INFO "OMAP730 GPIO hardware\n"); - gpio_bank_count = 7; - gpio_bank = gpio_bank_730; - } -#endif -#ifdef CONFIG_ARCH_OMAP850 - if (cpu_is_omap850()) { - printk(KERN_INFO "OMAP850 GPIO hardware\n"); +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + if (cpu_is_omap7xx()) { gpio_bank_count = 7; - gpio_bank = gpio_bank_850; + gpio_bank = gpio_bank_7xx; + bank_size = SZ_2K; } #endif - #ifdef CONFIG_ARCH_OMAP24XX if (cpu_is_omap242x()) { - int rev; - gpio_bank_count = 4; gpio_bank = gpio_bank_242x; - rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); - printk(KERN_INFO "OMAP242x GPIO hardware version %d.%d\n", - (rev >> 4) & 0x0f, rev & 0x0f); } if (cpu_is_omap243x()) { - int rev; - gpio_bank_count = 5; gpio_bank = gpio_bank_243x; - rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); - printk(KERN_INFO "OMAP243x GPIO hardware version %d.%d\n", - (rev >> 4) & 0x0f, rev & 0x0f); } #endif #ifdef CONFIG_ARCH_OMAP34XX if (cpu_is_omap34xx()) { - int rev; - gpio_bank_count = OMAP34XX_NR_GPIOS; gpio_bank = gpio_bank_34xx; - rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); - printk(KERN_INFO "OMAP34xx GPIO hardware version %d.%d\n", - (rev >> 4) & 0x0f, rev & 0x0f); } #endif #ifdef CONFIG_ARCH_OMAP4 if (cpu_is_omap44xx()) { - int rev; - gpio_bank_count = OMAP34XX_NR_GPIOS; gpio_bank = gpio_bank_44xx; - rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION); - printk(KERN_INFO "OMAP44xx GPIO hardware version %d.%d\n", - (rev >> 4) & 0x0f, rev & 0x0f); } #endif for (i = 0; i < gpio_bank_count; i++) { @@ -1757,6 +1694,14 @@ static int __init _omap_gpio_init(void) bank = &gpio_bank[i]; spin_lock_init(&bank->lock); + + /* Static mapping, never released */ + bank->base = ioremap(bank->pbase, bank_size); + if (!bank->base) { + printk(KERN_ERR "Could not ioremap gpio bank%i\n", i); + continue; + } + if (bank_is_mpuio(bank)) __raw_writew(0xffff, bank->base + OMAP_MPUIO_GPIO_MASKIT); if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) { @@ -1768,11 +1713,11 @@ static int __init _omap_gpio_init(void) __raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1); __raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG); } - if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_730) { - __raw_writel(0xffffffff, bank->base + OMAP730_GPIO_INT_MASK); - __raw_writel(0x00000000, bank->base + OMAP730_GPIO_INT_STATUS); + if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) { + __raw_writel(0xffffffff, bank->base + OMAP7XX_GPIO_INT_MASK); + __raw_writel(0x00000000, bank->base + OMAP7XX_GPIO_INT_STATUS); - gpio_count = 32; /* 730 has 32-bit GPIOs */ + gpio_count = 32; /* 7xx has 32-bit GPIOs */ } #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ @@ -1862,6 +1807,8 @@ static int __init _omap_gpio_init(void) if (cpu_is_omap34xx()) omap_writel(1 << 0, 0x48306814); + omap_gpio_show_rev(); + return 0; } @@ -2106,6 +2053,81 @@ void omap2_gpio_resume_after_retention(void) #endif +#ifdef CONFIG_ARCH_OMAP34XX +/* save the registers of bank 2-6 */ +void omap_gpio_save_context(void) +{ + int i; + + /* saving banks from 2-6 only since GPIO1 is in WKUP */ + for (i = 1; i < gpio_bank_count; i++) { + struct gpio_bank *bank = &gpio_bank[i]; + gpio_context[i].sysconfig = + __raw_readl(bank->base + OMAP24XX_GPIO_SYSCONFIG); + gpio_context[i].irqenable1 = + __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1); + gpio_context[i].irqenable2 = + __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE2); + gpio_context[i].wake_en = + __raw_readl(bank->base + OMAP24XX_GPIO_WAKE_EN); + gpio_context[i].ctrl = + __raw_readl(bank->base + OMAP24XX_GPIO_CTRL); + gpio_context[i].oe = + __raw_readl(bank->base + OMAP24XX_GPIO_OE); + gpio_context[i].leveldetect0 = + __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0); + gpio_context[i].leveldetect1 = + __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); + gpio_context[i].risingdetect = + __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT); + gpio_context[i].fallingdetect = + __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT); + gpio_context[i].dataout = + __raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT); + gpio_context[i].setwkuena = + __raw_readl(bank->base + OMAP24XX_GPIO_SETWKUENA); + gpio_context[i].setdataout = + __raw_readl(bank->base + OMAP24XX_GPIO_SETDATAOUT); + } +} + +/* restore the required registers of bank 2-6 */ +void omap_gpio_restore_context(void) +{ + int i; + + for (i = 1; i < gpio_bank_count; i++) { + struct gpio_bank *bank = &gpio_bank[i]; + __raw_writel(gpio_context[i].sysconfig, + bank->base + OMAP24XX_GPIO_SYSCONFIG); + __raw_writel(gpio_context[i].irqenable1, + bank->base + OMAP24XX_GPIO_IRQENABLE1); + __raw_writel(gpio_context[i].irqenable2, + bank->base + OMAP24XX_GPIO_IRQENABLE2); + __raw_writel(gpio_context[i].wake_en, + bank->base + OMAP24XX_GPIO_WAKE_EN); + __raw_writel(gpio_context[i].ctrl, + bank->base + OMAP24XX_GPIO_CTRL); + __raw_writel(gpio_context[i].oe, + bank->base + OMAP24XX_GPIO_OE); + __raw_writel(gpio_context[i].leveldetect0, + bank->base + OMAP24XX_GPIO_LEVELDETECT0); + __raw_writel(gpio_context[i].leveldetect1, + bank->base + OMAP24XX_GPIO_LEVELDETECT1); + __raw_writel(gpio_context[i].risingdetect, + bank->base + OMAP24XX_GPIO_RISINGDETECT); + __raw_writel(gpio_context[i].fallingdetect, + bank->base + OMAP24XX_GPIO_FALLINGDETECT); + __raw_writel(gpio_context[i].dataout, + bank->base + OMAP24XX_GPIO_DATAOUT); + __raw_writel(gpio_context[i].setwkuena, + bank->base + OMAP24XX_GPIO_SETWKUENA); + __raw_writel(gpio_context[i].setdataout, + bank->base + OMAP24XX_GPIO_SETDATAOUT); + } +} +#endif + /* * This may get called early from board specific init * for boards that have interrupts routed via FPGA. @@ -2160,8 +2182,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused) if (bank_is_mpuio(bank)) gpio = OMAP_MPUIO(0); - else if (cpu_class_is_omap2() || cpu_is_omap730() || - cpu_is_omap850()) + else if (cpu_class_is_omap2() || cpu_is_omap7xx()) bankwidth = 32; for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) { diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index 8b848391f0c8..c08362dbb8ed 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -27,7 +27,7 @@ #include <linux/platform_device.h> #include <linux/i2c.h> #include <mach/irqs.h> -#include <mach/mux.h> +#include <plat/mux.h> #define OMAP_I2C_SIZE 0x3f #define OMAP1_I2C_BASE 0xfffb3800 diff --git a/arch/arm/plat-omap/include/mach/blizzard.h b/arch/arm/plat-omap/include/plat/blizzard.h index 8d160f171372..8d160f171372 100644 --- a/arch/arm/plat-omap/include/mach/blizzard.h +++ b/arch/arm/plat-omap/include/plat/blizzard.h diff --git a/arch/arm/plat-omap/include/mach/board-ams-delta.h b/arch/arm/plat-omap/include/plat/board-ams-delta.h index 51b102dc906b..51b102dc906b 100644 --- a/arch/arm/plat-omap/include/mach/board-ams-delta.h +++ b/arch/arm/plat-omap/include/plat/board-ams-delta.h diff --git a/arch/arm/plat-omap/include/mach/board-sx1.h b/arch/arm/plat-omap/include/plat/board-sx1.h index 355adbdaae33..355adbdaae33 100644 --- a/arch/arm/plat-omap/include/mach/board-sx1.h +++ b/arch/arm/plat-omap/include/plat/board-sx1.h diff --git a/arch/arm/plat-omap/include/mach/board-voiceblue.h b/arch/arm/plat-omap/include/plat/board-voiceblue.h index 27916b210f57..27916b210f57 100644 --- a/arch/arm/plat-omap/include/mach/board-voiceblue.h +++ b/arch/arm/plat-omap/include/plat/board-voiceblue.h diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/plat/board.h index 8e913c322810..c4fc69f09796 100644 --- a/arch/arm/plat-omap/include/mach/board.h +++ b/arch/arm/plat-omap/include/plat/board.h @@ -12,7 +12,7 @@ #include <linux/types.h> -#include <mach/gpio-switch.h> +#include <plat/gpio-switch.h> /* Different peripheral ids */ #define OMAP_TAG_CLOCK 0x4f01 diff --git a/arch/arm/plat-omap/include/mach/clkdev.h b/arch/arm/plat-omap/include/plat/clkdev.h index 730c49d1ebd8..730c49d1ebd8 100644 --- a/arch/arm/plat-omap/include/mach/clkdev.h +++ b/arch/arm/plat-omap/include/plat/clkdev.h diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/plat/clock.h index 4b8b0d65cbf2..4b8b0d65cbf2 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h diff --git a/arch/arm/plat-omap/include/mach/clockdomain.h b/arch/arm/plat-omap/include/plat/clockdomain.h index 99ebd886f134..eb734826e64e 100644 --- a/arch/arm/plat-omap/include/mach/clockdomain.h +++ b/arch/arm/plat-omap/include/plat/clockdomain.h @@ -16,9 +16,9 @@ #ifndef __ASM_ARM_ARCH_OMAP_CLOCKDOMAIN_H #define __ASM_ARM_ARCH_OMAP_CLOCKDOMAIN_H -#include <mach/powerdomain.h> -#include <mach/clock.h> -#include <mach/cpu.h> +#include <plat/powerdomain.h> +#include <plat/clock.h> +#include <plat/cpu.h> /* Clockdomain capability flags */ #define CLKDM_CAN_FORCE_SLEEP (1 << 0) diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/plat/common.h index fdeab421b4dc..064f1730f43b 100644 --- a/arch/arm/plat-omap/include/mach/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -31,6 +31,9 @@ struct sys_timer; +/* used by omap-smp.c and board-4430sdp.c */ +extern void __iomem *gic_cpu_base_addr; + extern void omap_map_common_io(void); extern struct sys_timer omap_timer; #if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/plat/control.h index 826d317cdbec..8237cb9e74fd 100644 --- a/arch/arm/plat-omap/include/mach/control.h +++ b/arch/arm/plat-omap/include/plat/control.h @@ -20,15 +20,18 @@ #ifndef __ASSEMBLY__ #define OMAP242X_CTRL_REGADDR(reg) \ - OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) + OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) #define OMAP243X_CTRL_REGADDR(reg) \ - OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) + OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) #define OMAP343X_CTRL_REGADDR(reg) \ - OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) + OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) #else -#define OMAP242X_CTRL_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) -#define OMAP243X_CTRL_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) -#define OMAP343X_CTRL_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) +#define OMAP242X_CTRL_REGADDR(reg) \ + OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) +#define OMAP243X_CTRL_REGADDR(reg) \ + OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) +#define OMAP343X_CTRL_REGADDR(reg) \ + OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) #endif /* __ASSEMBLY__ */ /* @@ -109,6 +112,8 @@ #define OMAP24XX_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e0) #define OMAP24XX_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00e4) +#define OMAP343X_CONTROL_PADCONF_SYSNIRQ (OMAP2_CONTROL_INTERFACE + 0x01b0) + /* 34xx-only CONTROL_GENERAL register offsets */ #define OMAP343X_CONTROL_PADCONF_OFF (OMAP2_CONTROL_GENERAL + 0x0000) #define OMAP343X_CONTROL_MEM_DFTRW0 (OMAP2_CONTROL_GENERAL + 0x0008) @@ -141,8 +146,51 @@ #define OMAP343X_CONTROL_TEST_KEY_13 (OMAP2_CONTROL_GENERAL + 0x00fc) #define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) #define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) -#define OMAP343X_CONTROL_PBIAS_LITE (OMAP2_CONTROL_GENERAL + 0x02b0) -#define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02b4) +#define OMAP343X_CONTROL_DEBOBS(i) (OMAP2_CONTROL_GENERAL + 0x01B0 \ + + ((i) >> 1) * 4 + (!(i) & 1) * 2) +#define OMAP343X_CONTROL_PROG_IO0 (OMAP2_CONTROL_GENERAL + 0x01D4) +#define OMAP343X_CONTROL_PROG_IO1 (OMAP2_CONTROL_GENERAL + 0x01D8) +#define OMAP343X_CONTROL_DSS_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01E0) +#define OMAP343X_CONTROL_CORE_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01E4) +#define OMAP343X_CONTROL_PER_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01E8) +#define OMAP343X_CONTROL_USBHOST_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01EC) +#define OMAP343X_CONTROL_PBIAS_LITE (OMAP2_CONTROL_GENERAL + 0x02B0) +#define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02B4) +#define OMAP343X_CONTROL_SRAMLDO4 (OMAP2_CONTROL_GENERAL + 0x02B8) +#define OMAP343X_CONTROL_SRAMLDO5 (OMAP2_CONTROL_GENERAL + 0x02C0) +#define OMAP343X_CONTROL_CSI (OMAP2_CONTROL_GENERAL + 0x02C4) + + +/* 34xx PADCONF register offsets */ +#define OMAP343X_PADCONF_ETK(i) (OMAP2_CONTROL_PADCONFS + 0x5a8 + \ + (i)*2) +#define OMAP343X_PADCONF_ETK_CLK OMAP343X_PADCONF_ETK(0) +#define OMAP343X_PADCONF_ETK_CTL OMAP343X_PADCONF_ETK(1) +#define OMAP343X_PADCONF_ETK_D0 OMAP343X_PADCONF_ETK(2) +#define OMAP343X_PADCONF_ETK_D1 OMAP343X_PADCONF_ETK(3) +#define OMAP343X_PADCONF_ETK_D2 OMAP343X_PADCONF_ETK(4) +#define OMAP343X_PADCONF_ETK_D3 OMAP343X_PADCONF_ETK(5) +#define OMAP343X_PADCONF_ETK_D4 OMAP343X_PADCONF_ETK(6) +#define OMAP343X_PADCONF_ETK_D5 OMAP343X_PADCONF_ETK(7) +#define OMAP343X_PADCONF_ETK_D6 OMAP343X_PADCONF_ETK(8) +#define OMAP343X_PADCONF_ETK_D7 OMAP343X_PADCONF_ETK(9) +#define OMAP343X_PADCONF_ETK_D8 OMAP343X_PADCONF_ETK(10) +#define OMAP343X_PADCONF_ETK_D9 OMAP343X_PADCONF_ETK(11) +#define OMAP343X_PADCONF_ETK_D10 OMAP343X_PADCONF_ETK(12) +#define OMAP343X_PADCONF_ETK_D11 OMAP343X_PADCONF_ETK(13) +#define OMAP343X_PADCONF_ETK_D12 OMAP343X_PADCONF_ETK(14) +#define OMAP343X_PADCONF_ETK_D13 OMAP343X_PADCONF_ETK(15) +#define OMAP343X_PADCONF_ETK_D14 OMAP343X_PADCONF_ETK(16) +#define OMAP343X_PADCONF_ETK_D15 OMAP343X_PADCONF_ETK(17) + +/* 34xx GENERAL_WKUP regist offsets */ +#define OMAP343X_CONTROL_WKUP_DEBOBSMUX(i) (OMAP343X_CONTROL_GENERAL_WKUP + \ + 0x008 + (i)) +#define OMAP343X_CONTROL_WKUP_DEBOBS0 (OMAP343X_CONTROL_GENERAL_WKUP + 0x008) +#define OMAP343X_CONTROL_WKUP_DEBOBS1 (OMAP343X_CONTROL_GENERAL_WKUP + 0x00C) +#define OMAP343X_CONTROL_WKUP_DEBOBS2 (OMAP343X_CONTROL_GENERAL_WKUP + 0x010) +#define OMAP343X_CONTROL_WKUP_DEBOBS3 (OMAP343X_CONTROL_GENERAL_WKUP + 0x014) +#define OMAP343X_CONTROL_WKUP_DEBOBS4 (OMAP343X_CONTROL_GENERAL_WKUP + 0x018) /* 34xx D2D idle-related pins, handled by PM core */ #define OMAP3_PADCONF_SAD2D_MSTANDBY 0x250 @@ -202,6 +250,10 @@ #define OMAP3_PADCONF_WAKEUPEVENT0 (1 << 15) #define OMAP3_PADCONF_WAKEUPENABLE0 (1 << 14) +#define OMAP343X_SCRATCHPAD_ROM (OMAP343X_CTRL_BASE + 0x860) +#define OMAP343X_SCRATCHPAD (OMAP343X_CTRL_BASE + 0x910) +#define OMAP343X_SCRATCHPAD_ROM_OFFSET 0x19C + #ifndef __ASSEMBLY__ #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ defined(CONFIG_ARCH_OMAP4) @@ -212,6 +264,15 @@ extern u32 omap_ctrl_readl(u16 offset); extern void omap_ctrl_writeb(u8 val, u16 offset); extern void omap_ctrl_writew(u16 val, u16 offset); extern void omap_ctrl_writel(u32 val, u16 offset); + +extern void omap3_save_scratchpad_contents(void); +extern void omap3_clear_scratchpad_contents(void); +extern u32 *get_restore_pointer(void); +extern u32 *get_es3_restore_pointer(void); +extern u32 omap3_arm_context[128]; +extern void omap3_control_save_context(void); +extern void omap3_control_restore_context(void); + #else #define omap_ctrl_base_get() 0 #define omap_ctrl_readb(x) 0 diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index f129efb3075e..f129efb3075e 100644 --- a/arch/arm/plat-omap/include/mach/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/plat/dma.h index 72f680b7180d..1c017b29b7e9 100644 --- a/arch/arm/plat-omap/include/mach/dma.h +++ b/arch/arm/plat-omap/include/plat/dma.h @@ -633,6 +633,11 @@ extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype); extern void omap_set_dma_src_endian_type(int lch, enum end_type etype); extern int omap_get_dma_index(int lch, int *ei, int *fi); +void omap_dma_global_context_save(void); +void omap_dma_global_context_restore(void); + +extern void omap_dma_disable_irq(int lch); + /* Chaining APIs */ #ifndef CONFIG_ARCH_OMAP1 extern int omap_request_dma_chain(int dev_id, const char *dev_name, diff --git a/arch/arm/plat-omap/include/mach/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index 20f1054c0a80..20f1054c0a80 100644 --- a/arch/arm/plat-omap/include/mach/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h diff --git a/arch/arm/plat-omap/include/mach/dsp_common.h b/arch/arm/plat-omap/include/plat/dsp_common.h index da97736f3efa..da97736f3efa 100644 --- a/arch/arm/plat-omap/include/mach/dsp_common.h +++ b/arch/arm/plat-omap/include/plat/dsp_common.h diff --git a/arch/arm/plat-omap/include/mach/fpga.h b/arch/arm/plat-omap/include/plat/fpga.h index f1864a652f7a..f1864a652f7a 100644 --- a/arch/arm/plat-omap/include/mach/fpga.h +++ b/arch/arm/plat-omap/include/plat/fpga.h diff --git a/arch/arm/plat-omap/include/mach/gpio-switch.h b/arch/arm/plat-omap/include/plat/gpio-switch.h index 10da0e07c0cf..10da0e07c0cf 100644 --- a/arch/arm/plat-omap/include/mach/gpio-switch.h +++ b/arch/arm/plat-omap/include/plat/gpio-switch.h diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index 633ff688b928..de7c54731cbe 100644 --- a/arch/arm/plat-omap/include/mach/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -76,7 +76,8 @@ extern void omap2_gpio_prepare_for_retention(void); extern void omap2_gpio_resume_after_retention(void); extern void omap_set_gpio_debounce(int gpio, int enable); extern void omap_set_gpio_debounce_time(int gpio, int enable); - +extern void omap_gpio_save_context(void); +extern void omap_gpio_restore_context(void); /*-------------------------------------------------------------------------*/ /* Wrappers for "new style" GPIO calls, using the new infrastructure diff --git a/arch/arm/plat-omap/include/mach/gpmc-smc91x.h b/arch/arm/plat-omap/include/plat/gpmc-smc91x.h index b64fbee4d567..b64fbee4d567 100644 --- a/arch/arm/plat-omap/include/mach/gpmc-smc91x.h +++ b/arch/arm/plat-omap/include/plat/gpmc-smc91x.h diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h index 9c99cda77ba6..696e0ca051b7 100644 --- a/arch/arm/plat-omap/include/mach/gpmc.h +++ b/arch/arm/plat-omap/include/plat/gpmc.h @@ -52,6 +52,7 @@ #define GPMC_CONFIG1_FCLK_DIV2 (GPMC_CONFIG1_FCLK_DIV(1)) #define GPMC_CONFIG1_FCLK_DIV3 (GPMC_CONFIG1_FCLK_DIV(2)) #define GPMC_CONFIG1_FCLK_DIV4 (GPMC_CONFIG1_FCLK_DIV(3)) +#define GPMC_CONFIG7_CSVALID (1 << 6) /* * Note that all values in this struct are in nanoseconds, while @@ -107,6 +108,8 @@ extern int gpmc_prefetch_enable(int cs, int dma_mode, unsigned int u32_count, int is_write); extern void gpmc_prefetch_reset(void); extern int gpmc_prefetch_status(void); +extern void omap3_gpmc_save_context(void); +extern void omap3_gpmc_restore_context(void); extern void __init gpmc_init(void); #endif diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h index 26c1fbff08aa..d5b26adfb890 100644 --- a/arch/arm/plat-omap/include/mach/hardware.h +++ b/arch/arm/plat-omap/include/plat/hardware.h @@ -39,9 +39,9 @@ #include <asm/sizes.h> #ifndef __ASSEMBLER__ #include <asm/types.h> -#include <mach/cpu.h> +#include <plat/cpu.h> #endif -#include <mach/serial.h> +#include <plat/serial.h> /* * --------------------------------------------------------------------------- @@ -280,11 +280,11 @@ * --------------------------------------------------------------------------- */ -#include "omap730.h" -#include "omap1510.h" -#include "omap16xx.h" -#include "omap24xx.h" -#include "omap34xx.h" -#include "omap44xx.h" +#include <plat/omap7xx.h> +#include <plat/omap1510.h> +#include <plat/omap16xx.h> +#include <plat/omap24xx.h> +#include <plat/omap34xx.h> +#include <plat/omap44xx.h> #endif /* __ASM_ARCH_OMAP_HARDWARE_H */ diff --git a/arch/arm/plat-omap/include/mach/hwa742.h b/arch/arm/plat-omap/include/plat/hwa742.h index 886248d32b49..886248d32b49 100644 --- a/arch/arm/plat-omap/include/mach/hwa742.h +++ b/arch/arm/plat-omap/include/plat/hwa742.h diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/plat/io.h index 8d32df32b0b1..7e5319f907d1 100644 --- a/arch/arm/plat-omap/include/mach/io.h +++ b/arch/arm/plat-omap/include/plat/io.h @@ -63,8 +63,24 @@ #define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ #define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET) -#define OMAP2_IO_OFFSET 0x90000000 -#define OMAP2_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_IO_OFFSET) /* L3 and L4 */ +#define OMAP2_L3_IO_OFFSET 0x90000000 +#define OMAP2_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L3_IO_OFFSET) /* L3 */ + + +#define OMAP2_L4_IO_OFFSET 0xb2000000 +#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) /* L4 */ + +#define OMAP4_L3_IO_OFFSET 0xb4000000 +#define OMAP4_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_IO_OFFSET) /* L3 */ + +#define OMAP4_L3_PER_IO_OFFSET 0xb1100000 +#define OMAP4_L3_PER_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_PER_IO_OFFSET) + +#define OMAP4_GPMC_IO_OFFSET 0xa9000000 +#define OMAP4_GPMC_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_GPMC_IO_OFFSET) + +#define OMAP2_EMU_IO_OFFSET 0xaa800000 /* Emulation */ +#define OMAP2_EMU_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_EMU_IO_OFFSET) /* * ---------------------------------------------------------------------------- @@ -83,24 +99,27 @@ */ /* We map both L3 and L4 on OMAP2 */ -#define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 */ -#define L3_24XX_VIRT 0xf8000000 +#define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 --> 0xf8000000*/ +#define L3_24XX_VIRT (L3_24XX_PHYS + OMAP2_L3_IO_OFFSET) #define L3_24XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */ -#define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 */ -#define L4_24XX_VIRT 0xd8000000 +#define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 --> 0xfa000000 */ +#define L4_24XX_VIRT (L4_24XX_PHYS + OMAP2_L4_IO_OFFSET) #define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */ -#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 */ -#define L4_WK_243X_VIRT 0xd9000000 +#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 --> 0xfb000000 */ +#define L4_WK_243X_VIRT (L4_WK_243X_PHYS + OMAP2_L4_IO_OFFSET) #define L4_WK_243X_SIZE SZ_1M -#define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE /* 0x49000000 */ -#define OMAP243X_GPMC_VIRT 0xFE000000 +#define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE +#define OMAP243X_GPMC_VIRT (OMAP243X_GPMC_PHYS + OMAP2_L3_IO_OFFSET) + /* 0x6e000000 --> 0xfe000000 */ #define OMAP243X_GPMC_SIZE SZ_1M #define OMAP243X_SDRC_PHYS OMAP243X_SDRC_BASE -#define OMAP243X_SDRC_VIRT 0xFD000000 + /* 0x6D000000 --> 0xfd000000 */ +#define OMAP243X_SDRC_VIRT (OMAP243X_SDRC_PHYS + OMAP2_L3_IO_OFFSET) #define OMAP243X_SDRC_SIZE SZ_1M #define OMAP243X_SMS_PHYS OMAP243X_SMS_BASE -#define OMAP243X_SMS_VIRT 0xFC000000 + /* 0x6c000000 --> 0xfc000000 */ +#define OMAP243X_SMS_VIRT (OMAP243X_SMS_PHYS + OMAP2_L3_IO_OFFSET) #define OMAP243X_SMS_SIZE SZ_1M /* DSP */ @@ -121,12 +140,12 @@ */ /* We map both L3 and L4 on OMAP3 */ -#define L3_34XX_PHYS L3_34XX_BASE /* 0x68000000 */ -#define L3_34XX_VIRT 0xf8000000 +#define L3_34XX_PHYS L3_34XX_BASE /* 0x68000000 --> 0xf8000000 */ +#define L3_34XX_VIRT (L3_34XX_PHYS + OMAP2_L3_IO_OFFSET) #define L3_34XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */ -#define L4_34XX_PHYS L4_34XX_BASE /* 0x48000000 */ -#define L4_34XX_VIRT 0xd8000000 +#define L4_34XX_PHYS L4_34XX_BASE /* 0x48000000 --> 0xfa000000 */ +#define L4_34XX_VIRT (L4_34XX_PHYS + OMAP2_L4_IO_OFFSET) #define L4_34XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */ /* @@ -134,28 +153,33 @@ * VPOM3430 was not working for Int controller */ -#define L4_WK_34XX_PHYS L4_WK_34XX_BASE /* 0x48300000 */ -#define L4_WK_34XX_VIRT 0xd8300000 +#define L4_WK_34XX_PHYS L4_WK_34XX_BASE /* 0x48300000 --> 0xfa300000 */ +#define L4_WK_34XX_VIRT (L4_WK_34XX_PHYS + OMAP2_L4_IO_OFFSET) #define L4_WK_34XX_SIZE SZ_1M -#define L4_PER_34XX_PHYS L4_PER_34XX_BASE /* 0x49000000 */ -#define L4_PER_34XX_VIRT 0xd9000000 +#define L4_PER_34XX_PHYS L4_PER_34XX_BASE + /* 0x49000000 --> 0xfb000000 */ +#define L4_PER_34XX_VIRT (L4_PER_34XX_PHYS + OMAP2_L4_IO_OFFSET) #define L4_PER_34XX_SIZE SZ_1M -#define L4_EMU_34XX_PHYS L4_EMU_34XX_BASE /* 0x54000000 */ -#define L4_EMU_34XX_VIRT 0xe4000000 -#define L4_EMU_34XX_SIZE SZ_64M +#define L4_EMU_34XX_PHYS L4_EMU_34XX_BASE + /* 0x54000000 --> 0xfe800000 */ +#define L4_EMU_34XX_VIRT (L4_EMU_34XX_PHYS + OMAP2_EMU_IO_OFFSET) +#define L4_EMU_34XX_SIZE SZ_8M -#define OMAP34XX_GPMC_PHYS OMAP34XX_GPMC_BASE /* 0x6E000000 */ -#define OMAP34XX_GPMC_VIRT 0xFE000000 +#define OMAP34XX_GPMC_PHYS OMAP34XX_GPMC_BASE + /* 0x6e000000 --> 0xfe000000 */ +#define OMAP34XX_GPMC_VIRT (OMAP34XX_GPMC_PHYS + OMAP2_L3_IO_OFFSET) #define OMAP34XX_GPMC_SIZE SZ_1M -#define OMAP343X_SMS_PHYS OMAP343X_SMS_BASE /* 0x6C000000 */ -#define OMAP343X_SMS_VIRT 0xFC000000 +#define OMAP343X_SMS_PHYS OMAP343X_SMS_BASE + /* 0x6c000000 --> 0xfc000000 */ +#define OMAP343X_SMS_VIRT (OMAP343X_SMS_PHYS + OMAP2_L3_IO_OFFSET) #define OMAP343X_SMS_SIZE SZ_1M -#define OMAP343X_SDRC_PHYS OMAP343X_SDRC_BASE /* 0x6D000000 */ -#define OMAP343X_SDRC_VIRT 0xFD000000 +#define OMAP343X_SDRC_PHYS OMAP343X_SDRC_BASE + /* 0x6D000000 --> 0xfd000000 */ +#define OMAP343X_SDRC_VIRT (OMAP343X_SDRC_PHYS + OMAP2_L3_IO_OFFSET) #define OMAP343X_SDRC_SIZE SZ_1M /* DSP */ @@ -176,32 +200,54 @@ */ /* We map both L3 and L4 on OMAP4 */ -#define L3_44XX_PHYS L3_44XX_BASE -#define L3_44XX_VIRT 0xd4000000 +#define L3_44XX_PHYS L3_44XX_BASE /* 0x44000000 --> 0xf8000000 */ +#define L3_44XX_VIRT (L3_44XX_PHYS + OMAP4_L3_IO_OFFSET) #define L3_44XX_SIZE SZ_1M -#define L4_44XX_PHYS L4_44XX_BASE -#define L4_44XX_VIRT 0xda000000 +#define L4_44XX_PHYS L4_44XX_BASE /* 0x4a000000 --> 0xfc000000 */ +#define L4_44XX_VIRT (L4_44XX_PHYS + OMAP2_L4_IO_OFFSET) #define L4_44XX_SIZE SZ_4M -#define L4_WK_44XX_PHYS L4_WK_44XX_BASE -#define L4_WK_44XX_VIRT 0xda300000 +#define L4_WK_44XX_PHYS L4_WK_44XX_BASE /* 0x4a300000 --> 0xfc300000 */ +#define L4_WK_44XX_VIRT (L4_WK_44XX_PHYS + OMAP2_L4_IO_OFFSET) #define L4_WK_44XX_SIZE SZ_1M #define L4_PER_44XX_PHYS L4_PER_44XX_BASE -#define L4_PER_44XX_VIRT 0xd8000000 + /* 0x48000000 --> 0xfa000000 */ +#define L4_PER_44XX_VIRT (L4_PER_44XX_PHYS + OMAP2_L4_IO_OFFSET) #define L4_PER_44XX_SIZE SZ_4M +#define L4_ABE_44XX_PHYS L4_ABE_44XX_BASE + /* 0x49000000 --> 0xfb000000 */ +#define L4_ABE_44XX_VIRT (L4_ABE_44XX_PHYS + OMAP2_L4_IO_OFFSET) +#define L4_ABE_44XX_SIZE SZ_1M + #define L4_EMU_44XX_PHYS L4_EMU_44XX_BASE -#define L4_EMU_44XX_VIRT 0xe4000000 -#define L4_EMU_44XX_SIZE SZ_64M + /* 0x54000000 --> 0xfe800000 */ +#define L4_EMU_44XX_VIRT (L4_EMU_44XX_PHYS + OMAP2_EMU_IO_OFFSET) +#define L4_EMU_44XX_SIZE SZ_8M #define OMAP44XX_GPMC_PHYS OMAP44XX_GPMC_BASE -#define OMAP44XX_GPMC_VIRT 0xe0000000 + /* 0x50000000 --> 0xf9000000 */ +#define OMAP44XX_GPMC_VIRT (OMAP44XX_GPMC_PHYS + OMAP4_GPMC_IO_OFFSET) #define OMAP44XX_GPMC_SIZE SZ_1M +#define OMAP44XX_EMIF1_PHYS OMAP44XX_EMIF1_BASE + /* 0x4c000000 --> 0xfd100000 */ +#define OMAP44XX_EMIF1_VIRT (OMAP44XX_EMIF1_PHYS + OMAP4_L3_PER_IO_OFFSET) +#define OMAP44XX_EMIF1_SIZE SZ_1M + +#define OMAP44XX_EMIF2_PHYS OMAP44XX_EMIF2_BASE + /* 0x4d000000 --> 0xfd200000 */ +#define OMAP44XX_EMIF2_VIRT (OMAP44XX_EMIF2_PHYS + OMAP4_L3_PER_IO_OFFSET) +#define OMAP44XX_EMIF2_SIZE SZ_1M + +#define OMAP44XX_DMM_PHYS OMAP44XX_DMM_BASE + /* 0x4e000000 --> 0xfd300000 */ +#define OMAP44XX_DMM_VIRT (OMAP44XX_DMM_PHYS + OMAP4_L3_PER_IO_OFFSET) +#define OMAP44XX_DMM_SIZE SZ_1M /* * ---------------------------------------------------------------------------- * Omap specific register access diff --git a/arch/arm/plat-omap/include/mach/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h index 46d41ac83dbf..0752af9d099e 100644 --- a/arch/arm/plat-omap/include/mach/iommu.h +++ b/arch/arm/plat-omap/include/plat/iommu.h @@ -107,7 +107,7 @@ struct iommu_platform_data { #if defined(CONFIG_ARCH_OMAP1) #error "iommu for this processor not implemented yet" #else -#include <mach/iommu2.h> +#include <plat/iommu2.h> #endif /* diff --git a/arch/arm/plat-omap/include/mach/iommu2.h b/arch/arm/plat-omap/include/plat/iommu2.h index 10ad05f410e9..10ad05f410e9 100644 --- a/arch/arm/plat-omap/include/mach/iommu2.h +++ b/arch/arm/plat-omap/include/plat/iommu2.h diff --git a/arch/arm/plat-omap/include/mach/iovmm.h b/arch/arm/plat-omap/include/plat/iovmm.h index bdc7ce5d7a4a..bdc7ce5d7a4a 100644 --- a/arch/arm/plat-omap/include/mach/iovmm.h +++ b/arch/arm/plat-omap/include/plat/iovmm.h diff --git a/arch/arm/plat-omap/include/mach/irda.h b/arch/arm/plat-omap/include/plat/irda.h index 40f60339d1c6..40f60339d1c6 100644 --- a/arch/arm/plat-omap/include/mach/irda.h +++ b/arch/arm/plat-omap/include/plat/irda.h diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index 28a165058b61..ce5dd2d1dc21 100644 --- a/arch/arm/plat-omap/include/mach/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -86,49 +86,26 @@ #define INT_1610_SSR_FIFO_0 29 /* - * OMAP-730 specific IRQ numbers for interrupt handler 1 + * OMAP-7xx specific IRQ numbers for interrupt handler 1 */ -#define INT_730_IH2_FIQ 0 -#define INT_730_IH2_IRQ 1 -#define INT_730_USB_NON_ISO 2 -#define INT_730_USB_ISO 3 -#define INT_730_ICR 4 -#define INT_730_EAC 5 -#define INT_730_GPIO_BANK1 6 -#define INT_730_GPIO_BANK2 7 -#define INT_730_GPIO_BANK3 8 -#define INT_730_McBSP2TX 10 -#define INT_730_McBSP2RX 11 -#define INT_730_McBSP2RX_OVF 12 -#define INT_730_LCD_LINE 14 -#define INT_730_GSM_PROTECT 15 -#define INT_730_TIMER3 16 -#define INT_730_GPIO_BANK5 17 -#define INT_730_GPIO_BANK6 18 -#define INT_730_SPGIO_WR 29 - -/* - * OMAP-850 specific IRQ numbers for interrupt handler 1 - */ -#define INT_850_IH2_FIQ 0 -#define INT_850_IH2_IRQ 1 -#define INT_850_USB_NON_ISO 2 -#define INT_850_USB_ISO 3 -#define INT_850_ICR 4 -#define INT_850_EAC 5 -#define INT_850_GPIO_BANK1 6 -#define INT_850_GPIO_BANK2 7 -#define INT_850_GPIO_BANK3 8 -#define INT_850_McBSP2TX 10 -#define INT_850_McBSP2RX 11 -#define INT_850_McBSP2RX_OVF 12 -#define INT_850_LCD_LINE 14 -#define INT_850_GSM_PROTECT 15 -#define INT_850_TIMER3 16 -#define INT_850_GPIO_BANK5 17 -#define INT_850_GPIO_BANK6 18 -#define INT_850_SPGIO_WR 29 - +#define INT_7XX_IH2_FIQ 0 +#define INT_7XX_IH2_IRQ 1 +#define INT_7XX_USB_NON_ISO 2 +#define INT_7XX_USB_ISO 3 +#define INT_7XX_ICR 4 +#define INT_7XX_EAC 5 +#define INT_7XX_GPIO_BANK1 6 +#define INT_7XX_GPIO_BANK2 7 +#define INT_7XX_GPIO_BANK3 8 +#define INT_7XX_McBSP2TX 10 +#define INT_7XX_McBSP2RX 11 +#define INT_7XX_McBSP2RX_OVF 12 +#define INT_7XX_LCD_LINE 14 +#define INT_7XX_GSM_PROTECT 15 +#define INT_7XX_TIMER3 16 +#define INT_7XX_GPIO_BANK5 17 +#define INT_7XX_GPIO_BANK6 18 +#define INT_7XX_SPGIO_WR 29 /* * IRQ numbers for interrupt handler 2 @@ -206,120 +183,62 @@ #define INT_1610_SHA1MD5 (91 + IH2_BASE) /* - * OMAP-730 specific IRQ numbers for interrupt handler 2 + * OMAP-7xx specific IRQ numbers for interrupt handler 2 */ -#define INT_730_HW_ERRORS (0 + IH2_BASE) -#define INT_730_NFIQ_PWR_FAIL (1 + IH2_BASE) -#define INT_730_CFCD (2 + IH2_BASE) -#define INT_730_CFIREQ (3 + IH2_BASE) -#define INT_730_I2C (4 + IH2_BASE) -#define INT_730_PCC (5 + IH2_BASE) -#define INT_730_MPU_EXT_NIRQ (6 + IH2_BASE) -#define INT_730_SPI_100K_1 (7 + IH2_BASE) -#define INT_730_SYREN_SPI (8 + IH2_BASE) -#define INT_730_VLYNQ (9 + IH2_BASE) -#define INT_730_GPIO_BANK4 (10 + IH2_BASE) -#define INT_730_McBSP1TX (11 + IH2_BASE) -#define INT_730_McBSP1RX (12 + IH2_BASE) -#define INT_730_McBSP1RX_OF (13 + IH2_BASE) -#define INT_730_UART_MODEM_IRDA_2 (14 + IH2_BASE) -#define INT_730_UART_MODEM_1 (15 + IH2_BASE) -#define INT_730_MCSI (16 + IH2_BASE) -#define INT_730_uWireTX (17 + IH2_BASE) -#define INT_730_uWireRX (18 + IH2_BASE) -#define INT_730_SMC_CD (19 + IH2_BASE) -#define INT_730_SMC_IREQ (20 + IH2_BASE) -#define INT_730_HDQ_1WIRE (21 + IH2_BASE) -#define INT_730_TIMER32K (22 + IH2_BASE) -#define INT_730_MMC_SDIO (23 + IH2_BASE) -#define INT_730_UPLD (24 + IH2_BASE) -#define INT_730_USB_HHC_1 (27 + IH2_BASE) -#define INT_730_USB_HHC_2 (28 + IH2_BASE) -#define INT_730_USB_GENI (29 + IH2_BASE) -#define INT_730_USB_OTG (30 + IH2_BASE) -#define INT_730_CAMERA_IF (31 + IH2_BASE) -#define INT_730_RNG (32 + IH2_BASE) -#define INT_730_DUAL_MODE_TIMER (33 + IH2_BASE) -#define INT_730_DBB_RF_EN (34 + IH2_BASE) -#define INT_730_MPUIO_KEYPAD (35 + IH2_BASE) -#define INT_730_SHA1_MD5 (36 + IH2_BASE) -#define INT_730_SPI_100K_2 (37 + IH2_BASE) -#define INT_730_RNG_IDLE (38 + IH2_BASE) -#define INT_730_MPUIO (39 + IH2_BASE) -#define INT_730_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) -#define INT_730_LLPC_OE_FALLING (41 + IH2_BASE) -#define INT_730_LLPC_OE_RISING (42 + IH2_BASE) -#define INT_730_LLPC_VSYNC (43 + IH2_BASE) -#define INT_730_WAKE_UP_REQ (46 + IH2_BASE) -#define INT_730_DMA_CH6 (53 + IH2_BASE) -#define INT_730_DMA_CH7 (54 + IH2_BASE) -#define INT_730_DMA_CH8 (55 + IH2_BASE) -#define INT_730_DMA_CH9 (56 + IH2_BASE) -#define INT_730_DMA_CH10 (57 + IH2_BASE) -#define INT_730_DMA_CH11 (58 + IH2_BASE) -#define INT_730_DMA_CH12 (59 + IH2_BASE) -#define INT_730_DMA_CH13 (60 + IH2_BASE) -#define INT_730_DMA_CH14 (61 + IH2_BASE) -#define INT_730_DMA_CH15 (62 + IH2_BASE) -#define INT_730_NAND (63 + IH2_BASE) - -/* - * OMAP-850 specific IRQ numbers for interrupt handler 2 - */ -#define INT_850_HW_ERRORS (0 + IH2_BASE) -#define INT_850_NFIQ_PWR_FAIL (1 + IH2_BASE) -#define INT_850_CFCD (2 + IH2_BASE) -#define INT_850_CFIREQ (3 + IH2_BASE) -#define INT_850_I2C (4 + IH2_BASE) -#define INT_850_PCC (5 + IH2_BASE) -#define INT_850_MPU_EXT_NIRQ (6 + IH2_BASE) -#define INT_850_SPI_100K_1 (7 + IH2_BASE) -#define INT_850_SYREN_SPI (8 + IH2_BASE) -#define INT_850_VLYNQ (9 + IH2_BASE) -#define INT_850_GPIO_BANK4 (10 + IH2_BASE) -#define INT_850_McBSP1TX (11 + IH2_BASE) -#define INT_850_McBSP1RX (12 + IH2_BASE) -#define INT_850_McBSP1RX_OF (13 + IH2_BASE) -#define INT_850_UART_MODEM_IRDA_2 (14 + IH2_BASE) -#define INT_850_UART_MODEM_1 (15 + IH2_BASE) -#define INT_850_MCSI (16 + IH2_BASE) -#define INT_850_uWireTX (17 + IH2_BASE) -#define INT_850_uWireRX (18 + IH2_BASE) -#define INT_850_SMC_CD (19 + IH2_BASE) -#define INT_850_SMC_IREQ (20 + IH2_BASE) -#define INT_850_HDQ_1WIRE (21 + IH2_BASE) -#define INT_850_TIMER32K (22 + IH2_BASE) -#define INT_850_MMC_SDIO (23 + IH2_BASE) -#define INT_850_UPLD (24 + IH2_BASE) -#define INT_850_USB_HHC_1 (27 + IH2_BASE) -#define INT_850_USB_HHC_2 (28 + IH2_BASE) -#define INT_850_USB_GENI (29 + IH2_BASE) -#define INT_850_USB_OTG (30 + IH2_BASE) -#define INT_850_CAMERA_IF (31 + IH2_BASE) -#define INT_850_RNG (32 + IH2_BASE) -#define INT_850_DUAL_MODE_TIMER (33 + IH2_BASE) -#define INT_850_DBB_RF_EN (34 + IH2_BASE) -#define INT_850_MPUIO_KEYPAD (35 + IH2_BASE) -#define INT_850_SHA1_MD5 (36 + IH2_BASE) -#define INT_850_SPI_100K_2 (37 + IH2_BASE) -#define INT_850_RNG_IDLE (38 + IH2_BASE) -#define INT_850_MPUIO (39 + IH2_BASE) -#define INT_850_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) -#define INT_850_LLPC_OE_FALLING (41 + IH2_BASE) -#define INT_850_LLPC_OE_RISING (42 + IH2_BASE) -#define INT_850_LLPC_VSYNC (43 + IH2_BASE) -#define INT_850_WAKE_UP_REQ (46 + IH2_BASE) -#define INT_850_DMA_CH6 (53 + IH2_BASE) -#define INT_850_DMA_CH7 (54 + IH2_BASE) -#define INT_850_DMA_CH8 (55 + IH2_BASE) -#define INT_850_DMA_CH9 (56 + IH2_BASE) -#define INT_850_DMA_CH10 (57 + IH2_BASE) -#define INT_850_DMA_CH11 (58 + IH2_BASE) -#define INT_850_DMA_CH12 (59 + IH2_BASE) -#define INT_850_DMA_CH13 (60 + IH2_BASE) -#define INT_850_DMA_CH14 (61 + IH2_BASE) -#define INT_850_DMA_CH15 (62 + IH2_BASE) -#define INT_850_NAND (63 + IH2_BASE) +#define INT_7XX_HW_ERRORS (0 + IH2_BASE) +#define INT_7XX_NFIQ_PWR_FAIL (1 + IH2_BASE) +#define INT_7XX_CFCD (2 + IH2_BASE) +#define INT_7XX_CFIREQ (3 + IH2_BASE) +#define INT_7XX_I2C (4 + IH2_BASE) +#define INT_7XX_PCC (5 + IH2_BASE) +#define INT_7XX_MPU_EXT_NIRQ (6 + IH2_BASE) +#define INT_7XX_SPI_100K_1 (7 + IH2_BASE) +#define INT_7XX_SYREN_SPI (8 + IH2_BASE) +#define INT_7XX_VLYNQ (9 + IH2_BASE) +#define INT_7XX_GPIO_BANK4 (10 + IH2_BASE) +#define INT_7XX_McBSP1TX (11 + IH2_BASE) +#define INT_7XX_McBSP1RX (12 + IH2_BASE) +#define INT_7XX_McBSP1RX_OF (13 + IH2_BASE) +#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE) +#define INT_7XX_UART_MODEM_1 (15 + IH2_BASE) +#define INT_7XX_MCSI (16 + IH2_BASE) +#define INT_7XX_uWireTX (17 + IH2_BASE) +#define INT_7XX_uWireRX (18 + IH2_BASE) +#define INT_7XX_SMC_CD (19 + IH2_BASE) +#define INT_7XX_SMC_IREQ (20 + IH2_BASE) +#define INT_7XX_HDQ_1WIRE (21 + IH2_BASE) +#define INT_7XX_TIMER32K (22 + IH2_BASE) +#define INT_7XX_MMC_SDIO (23 + IH2_BASE) +#define INT_7XX_UPLD (24 + IH2_BASE) +#define INT_7XX_USB_HHC_1 (27 + IH2_BASE) +#define INT_7XX_USB_HHC_2 (28 + IH2_BASE) +#define INT_7XX_USB_GENI (29 + IH2_BASE) +#define INT_7XX_USB_OTG (30 + IH2_BASE) +#define INT_7XX_CAMERA_IF (31 + IH2_BASE) +#define INT_7XX_RNG (32 + IH2_BASE) +#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE) +#define INT_7XX_DBB_RF_EN (34 + IH2_BASE) +#define INT_7XX_MPUIO_KEYPAD (35 + IH2_BASE) +#define INT_7XX_SHA1_MD5 (36 + IH2_BASE) +#define INT_7XX_SPI_100K_2 (37 + IH2_BASE) +#define INT_7XX_RNG_IDLE (38 + IH2_BASE) +#define INT_7XX_MPUIO (39 + IH2_BASE) +#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) +#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE) +#define INT_7XX_LLPC_OE_RISING (42 + IH2_BASE) +#define INT_7XX_LLPC_VSYNC (43 + IH2_BASE) +#define INT_7XX_WAKE_UP_REQ (46 + IH2_BASE) +#define INT_7XX_DMA_CH6 (53 + IH2_BASE) +#define INT_7XX_DMA_CH7 (54 + IH2_BASE) +#define INT_7XX_DMA_CH8 (55 + IH2_BASE) +#define INT_7XX_DMA_CH9 (56 + IH2_BASE) +#define INT_7XX_DMA_CH10 (57 + IH2_BASE) +#define INT_7XX_DMA_CH11 (58 + IH2_BASE) +#define INT_7XX_DMA_CH12 (59 + IH2_BASE) +#define INT_7XX_DMA_CH13 (60 + IH2_BASE) +#define INT_7XX_DMA_CH14 (61 + IH2_BASE) +#define INT_7XX_DMA_CH15 (62 + IH2_BASE) +#define INT_7XX_NAND (63 + IH2_BASE) #define INT_24XX_SYS_NIRQ 7 #define INT_24XX_SDMA_IRQ0 12 @@ -558,9 +477,14 @@ #define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32)) +#define INTCPS_NR_MIR_REGS 3 +#define INTCPS_NR_IRQS 96 + #ifndef __ASSEMBLY__ extern void omap_init_irq(void); extern int omap_irq_pending(void); +void omap_intc_save_context(void); +void omap_intc_restore_context(void); #endif #include <mach/hardware.h> diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/plat/keypad.h index 3ae52ccc793c..3ae52ccc793c 100644 --- a/arch/arm/plat-omap/include/mach/keypad.h +++ b/arch/arm/plat-omap/include/plat/keypad.h diff --git a/arch/arm/plat-omap/include/mach/lcd_mipid.h b/arch/arm/plat-omap/include/plat/lcd_mipid.h index 8e52c6572281..8e52c6572281 100644 --- a/arch/arm/plat-omap/include/mach/lcd_mipid.h +++ b/arch/arm/plat-omap/include/plat/lcd_mipid.h diff --git a/arch/arm/plat-omap/include/mach/led.h b/arch/arm/plat-omap/include/plat/led.h index 25e451e7e2fd..25e451e7e2fd 100644 --- a/arch/arm/plat-omap/include/mach/led.h +++ b/arch/arm/plat-omap/include/plat/led.h diff --git a/arch/arm/plat-omap/include/mach/mailbox.h b/arch/arm/plat-omap/include/plat/mailbox.h index b7a6991814ec..b7a6991814ec 100644 --- a/arch/arm/plat-omap/include/mach/mailbox.h +++ b/arch/arm/plat-omap/include/plat/mailbox.h diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h index e0d6eca222cc..4f22e5bb7ff7 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -28,10 +28,10 @@ #include <linux/spinlock.h> #include <mach/hardware.h> -#include <mach/clock.h> +#include <plat/clock.h> -#define OMAP730_MCBSP1_BASE 0xfffb1000 -#define OMAP730_MCBSP2_BASE 0xfffb1800 +#define OMAP7XX_MCBSP1_BASE 0xfffb1000 +#define OMAP7XX_MCBSP2_BASE 0xfffb1800 #define OMAP1510_MCBSP1_BASE 0xe1011800 #define OMAP1510_MCBSP2_BASE 0xfffb1000 @@ -58,7 +58,7 @@ #define OMAP44XX_MCBSP3_BASE 0x49026000 #define OMAP44XX_MCBSP4_BASE 0x48074000 -#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) +#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) #define OMAP_MCBSP_REG_DRR2 0x00 #define OMAP_MCBSP_REG_DRR1 0x02 diff --git a/arch/arm/plat-omap/include/mach/mcspi.h b/arch/arm/plat-omap/include/plat/mcspi.h index 1254e4945b6f..1254e4945b6f 100644 --- a/arch/arm/plat-omap/include/mach/mcspi.h +++ b/arch/arm/plat-omap/include/plat/mcspi.h diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/plat/memory.h index 9ad41dc484c1..9ad41dc484c1 100644 --- a/arch/arm/plat-omap/include/mach/memory.h +++ b/arch/arm/plat-omap/include/plat/memory.h diff --git a/arch/arm/plat-omap/include/mach/menelaus.h b/arch/arm/plat-omap/include/plat/menelaus.h index 3122bf68c7ce..3122bf68c7ce 100644 --- a/arch/arm/plat-omap/include/mach/menelaus.h +++ b/arch/arm/plat-omap/include/plat/menelaus.h diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index 7229b9593301..29937137bf3e 100644 --- a/arch/arm/plat-omap/include/mach/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -15,7 +15,7 @@ #include <linux/device.h> #include <linux/mmc/host.h> -#include <mach/board.h> +#include <plat/board.h> #define OMAP15XX_NR_MMC 1 #define OMAP16XX_NR_MMC 2 diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/plat/mux.h index 0f49d2d563d9..f3c1d8a90456 100644 --- a/arch/arm/plat-omap/include/mach/mux.h +++ b/arch/arm/plat-omap/include/plat/mux.h @@ -51,23 +51,13 @@ .pu_pd_reg = PU_PD_SEL_##reg, \ .pu_pd_val = status, -#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \ - .mux_reg = OMAP730_IO_CONF_##reg, \ +#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \ + .mux_reg = OMAP7XX_IO_CONF_##reg, \ .mask_offset = mode_offset, \ .mask = mode, -#define PULL_REG_730(reg, bit, status) .pull_name = "OMAP730_IO_CONF_"#reg, \ - .pull_reg = OMAP730_IO_CONF_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - -#define MUX_REG_850(reg, mode_offset, mode) .mux_reg_name = "OMAP850_IO_CONF_"#reg, \ - .mux_reg = OMAP850_IO_CONF_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG_850(reg, bit, status) .pull_name = "OMAP850_IO_CONF_"#reg, \ - .pull_reg = OMAP850_IO_CONF_##reg, \ +#define PULL_REG_7XX(reg, bit, status) .pull_name = "OMAP7XX_IO_CONF_"#reg, \ + .pull_reg = OMAP7XX_IO_CONF_##reg, \ .pull_bit = bit, \ .pull_val = status, @@ -84,21 +74,12 @@ #define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \ .pu_pd_val = status, -#define MUX_REG_730(reg, mode_offset, mode) \ - .mux_reg = OMAP730_IO_CONF_##reg, \ +#define MUX_REG_7XX(reg, mode_offset, mode) \ + .mux_reg = OMAP7XX_IO_CONF_##reg, \ .mask_offset = mode_offset, \ .mask = mode, -#define PULL_REG_730(reg, bit, status) .pull_reg = OMAP730_IO_CONF_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - -#define MUX_REG_850(reg, mode_offset, mode) \ - .mux_reg = OMAP850_IO_CONF_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG_850(reg, bit, status) .pull_reg = OMAP850_IO_CONF_##reg, \ +#define PULL_REG_7XX(reg, bit, status) .pull_reg = OMAP7XX_IO_CONF_##reg, \ .pull_bit = bit, \ .pull_val = status, @@ -118,32 +99,21 @@ /* * OMAP730/850 has a slightly different config for the pin mux. - * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and + * - config regs are the OMAP7XX_IO_CONF_x regs (see omap730.h) regs and * not the FUNC_MUX_CTRL_x regs from hardware.h * - for pull-up/down, only has one enable bit which is is in the same register * as mux config */ -#define MUX_CFG_730(desc, mux_reg, mode_offset, mode, \ +#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode, \ pull_bit, pull_status, debug_status)\ { \ .name = desc, \ .debug = debug_status, \ - MUX_REG_730(mux_reg, mode_offset, mode) \ - PULL_REG_730(mux_reg, pull_bit, pull_status) \ + MUX_REG_7XX(mux_reg, mode_offset, mode) \ + PULL_REG_7XX(mux_reg, pull_bit, pull_status) \ PU_PD_REG(NA, 0) \ }, -#define MUX_CFG_850(desc, mux_reg, mode_offset, mode, \ - pull_bit, pull_status, debug_status)\ -{ \ - .name = desc, \ - .debug = debug_status, \ - MUX_REG_850(mux_reg, mode_offset, mode) \ - PULL_REG_850(mux_reg, pull_bit, pull_status) \ - PU_PD_REG(NA, 0) \ -}, - - #define MUX_CFG_24XX(desc, reg_offset, mode, \ pull_en, pull_mode, dbg) \ { \ @@ -232,45 +202,25 @@ struct pin_config { }; -enum omap730_index { +enum omap7xx_index { /* OMAP 730 keyboard */ - E2_730_KBR0, - J7_730_KBR1, - E1_730_KBR2, - F3_730_KBR3, - D2_730_KBR4, - C2_730_KBC0, - D3_730_KBC1, - E4_730_KBC2, - F4_730_KBC3, - E3_730_KBC4, - - /* USB */ - AA17_730_USB_DM, - W16_730_USB_PU_EN, - W17_730_USB_VBUSI, -}; - -enum omap850_index { - /* OMAP 850 keyboard */ - E2_850_KBR0, - J7_850_KBR1, - E1_850_KBR2, - F3_850_KBR3, - D2_850_KBR4, - C2_850_KBC0, - D3_850_KBC1, - E4_850_KBC2, - F4_850_KBC3, - E3_850_KBC4, + E2_7XX_KBR0, + J7_7XX_KBR1, + E1_7XX_KBR2, + F3_7XX_KBR3, + D2_7XX_KBR4, + C2_7XX_KBC0, + D3_7XX_KBC1, + E4_7XX_KBC2, + F4_7XX_KBC3, + E3_7XX_KBC4, /* USB */ - AA17_850_USB_DM, - W16_850_USB_PU_EN, - W17_850_USB_VBUSI, + AA17_7XX_USB_DM, + W16_7XX_USB_PU_EN, + W17_7XX_USB_VBUSI, }; - enum omap1xxx_index { /* UART1 (BT_UART_GATING)*/ UART1_TX = 0, diff --git a/arch/arm/plat-omap/include/mach/nand.h b/arch/arm/plat-omap/include/plat/nand.h index 631a7bed1eef..631a7bed1eef 100644 --- a/arch/arm/plat-omap/include/mach/nand.h +++ b/arch/arm/plat-omap/include/plat/nand.h diff --git a/arch/arm/plat-omap/include/mach/omap-alsa.h b/arch/arm/plat-omap/include/plat/omap-alsa.h index bdf30a0f87f2..b53055b390d0 100644 --- a/arch/arm/plat-omap/include/mach/omap-alsa.h +++ b/arch/arm/plat-omap/include/plat/omap-alsa.h @@ -40,10 +40,10 @@ #ifndef __OMAP_ALSA_H #define __OMAP_ALSA_H -#include <mach/dma.h> +#include <plat/dma.h> #include <sound/core.h> #include <sound/pcm.h> -#include <mach/mcbsp.h> +#include <plat/mcbsp.h> #include <linux/platform_device.h> #define DMA_BUF_SIZE (1024 * 8) diff --git a/arch/arm/plat-omap/include/mach/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h index 3ee41d711492..3ee41d711492 100644 --- a/arch/arm/plat-omap/include/mach/omap-pm.h +++ b/arch/arm/plat-omap/include/plat/omap-pm.h diff --git a/arch/arm/plat-omap/include/mach/omap1510.h b/arch/arm/plat-omap/include/plat/omap1510.h index d24004668138..d24004668138 100644 --- a/arch/arm/plat-omap/include/mach/omap1510.h +++ b/arch/arm/plat-omap/include/plat/omap1510.h diff --git a/arch/arm/plat-omap/include/mach/omap16xx.h b/arch/arm/plat-omap/include/plat/omap16xx.h index 0e69b504c25f..0e69b504c25f 100644 --- a/arch/arm/plat-omap/include/mach/omap16xx.h +++ b/arch/arm/plat-omap/include/plat/omap16xx.h diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/plat/omap24xx.h index 696edfc145a6..696edfc145a6 100644 --- a/arch/arm/plat-omap/include/mach/omap24xx.h +++ b/arch/arm/plat-omap/include/plat/omap24xx.h diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/plat/omap34xx.h index f8d186a73712..f8d186a73712 100644 --- a/arch/arm/plat-omap/include/mach/omap34xx.h +++ b/arch/arm/plat-omap/include/plat/omap34xx.h diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/plat/omap44xx.h index b3ba5ac7b4a4..336189753671 100644 --- a/arch/arm/plat-omap/include/mach/omap44xx.h +++ b/arch/arm/plat-omap/include/plat/omap44xx.h @@ -22,6 +22,9 @@ #define L4_PER_44XX_BASE 0x48000000 #define L4_EMU_44XX_BASE 0x54000000 #define L3_44XX_BASE 0x44000000 +#define OMAP44XX_EMIF1_BASE 0x4c000000 +#define OMAP44XX_EMIF2_BASE 0x4d000000 +#define OMAP44XX_DMM_BASE 0x4e000000 #define OMAP4430_32KSYNCT_BASE 0x4a304000 #define OMAP4430_CM_BASE 0x4a004000 #define OMAP4430_PRM_BASE 0x48306000 @@ -33,14 +36,9 @@ #define IRQ_SIR_IRQ 0x0040 #define OMAP44XX_GIC_DIST_BASE 0x48241000 #define OMAP44XX_GIC_CPU_BASE 0x48240100 -#define OMAP44XX_VA_GIC_CPU_BASE OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE) #define OMAP44XX_SCU_BASE 0x48240000 -#define OMAP44XX_VA_SCU_BASE OMAP2_IO_ADDRESS(OMAP44XX_SCU_BASE) #define OMAP44XX_LOCAL_TWD_BASE 0x48240600 -#define OMAP44XX_VA_LOCAL_TWD_BASE OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE) -#define OMAP44XX_LOCAL_TWD_SIZE 0x00000100 #define OMAP44XX_WKUPGEN_BASE 0x48281000 -#define OMAP44XX_VA_WKUPGEN_BASE OMAP2_IO_ADDRESS(OMAP44XX_WKUPGEN_BASE) #endif /* __ASM_ARCH_OMAP44XX_H */ diff --git a/arch/arm/plat-omap/include/mach/omap730.h b/arch/arm/plat-omap/include/plat/omap730.h index 14272bc1a6fd..14272bc1a6fd 100644 --- a/arch/arm/plat-omap/include/mach/omap730.h +++ b/arch/arm/plat-omap/include/plat/omap730.h diff --git a/arch/arm/plat-omap/include/plat/omap7xx.h b/arch/arm/plat-omap/include/plat/omap7xx.h new file mode 100644 index 000000000000..53f52414b0e9 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/omap7xx.h @@ -0,0 +1,104 @@ +/* arch/arm/plat-omap/include/mach/omap7xx.h + * + * Hardware definitions for TI OMAP7XX processor. + * + * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> + * Adapted for omap850 by Zebediah C. McClure <zmc@lurian.net> + * Adapted for omap7xx by Alistair Buxton <a.j.buxton@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP7XX_H +#define __ASM_ARCH_OMAP7XX_H + +/* + * ---------------------------------------------------------------------------- + * Base addresses + * ---------------------------------------------------------------------------- + */ + +/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ + +#define OMAP7XX_DSP_BASE 0xE0000000 +#define OMAP7XX_DSP_SIZE 0x50000 +#define OMAP7XX_DSP_START 0xE0000000 + +#define OMAP7XX_DSPREG_BASE 0xE1000000 +#define OMAP7XX_DSPREG_SIZE SZ_128K +#define OMAP7XX_DSPREG_START 0xE1000000 + +/* + * ---------------------------------------------------------------------------- + * OMAP7XX specific configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP7XX_CONFIG_BASE 0xfffe1000 +#define OMAP7XX_IO_CONF_0 0xfffe1070 +#define OMAP7XX_IO_CONF_1 0xfffe1074 +#define OMAP7XX_IO_CONF_2 0xfffe1078 +#define OMAP7XX_IO_CONF_3 0xfffe107c +#define OMAP7XX_IO_CONF_4 0xfffe1080 +#define OMAP7XX_IO_CONF_5 0xfffe1084 +#define OMAP7XX_IO_CONF_6 0xfffe1088 +#define OMAP7XX_IO_CONF_7 0xfffe108c +#define OMAP7XX_IO_CONF_8 0xfffe1090 +#define OMAP7XX_IO_CONF_9 0xfffe1094 +#define OMAP7XX_IO_CONF_10 0xfffe1098 +#define OMAP7XX_IO_CONF_11 0xfffe109c +#define OMAP7XX_IO_CONF_12 0xfffe10a0 +#define OMAP7XX_IO_CONF_13 0xfffe10a4 + +#define OMAP7XX_MODE_1 0xfffe1010 +#define OMAP7XX_MODE_2 0xfffe1014 + +/* CSMI specials: in terms of base + offset */ +#define OMAP7XX_MODE2_OFFSET 0x14 + +/* + * ---------------------------------------------------------------------------- + * OMAP7XX traffic controller configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP7XX_FLASH_CFG_0 0xfffecc10 +#define OMAP7XX_FLASH_ACFG_0 0xfffecc50 +#define OMAP7XX_FLASH_CFG_1 0xfffecc14 +#define OMAP7XX_FLASH_ACFG_1 0xfffecc54 + +/* + * ---------------------------------------------------------------------------- + * OMAP7XX DSP control registers + * ---------------------------------------------------------------------------- + */ +#define OMAP7XX_ICR_BASE 0xfffbb800 +#define OMAP7XX_DSP_M_CTL 0xfffbb804 +#define OMAP7XX_DSP_MMU_BASE 0xfffed200 + +/* + * ---------------------------------------------------------------------------- + * OMAP7XX PCC_UPLD configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP7XX_PCC_UPLD_CTRL_BASE (0xfffe0900) +#define OMAP7XX_PCC_UPLD_CTRL (OMAP7XX_PCC_UPLD_CTRL_BASE + 0x00) + +#endif /* __ASM_ARCH_OMAP7XX_H */ + diff --git a/arch/arm/plat-omap/include/mach/omap850.h b/arch/arm/plat-omap/include/plat/omap850.h index c33f67981712..c33f67981712 100644 --- a/arch/arm/plat-omap/include/mach/omap850.h +++ b/arch/arm/plat-omap/include/plat/omap850.h diff --git a/arch/arm/plat-omap/include/mach/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h index bd0e136db337..11a9773a4e7f 100644 --- a/arch/arm/plat-omap/include/mach/omap_device.h +++ b/arch/arm/plat-omap/include/plat/omap_device.h @@ -34,7 +34,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> -#include <mach/omap_hwmod.h> +#include <plat/omap_hwmod.h> /* omap_device._state values */ #define OMAP_DEVICE_STATE_UNKNOWN 0 diff --git a/arch/arm/plat-omap/include/mach/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 1f79c20e2929..dbdd123eca16 100644 --- a/arch/arm/plat-omap/include/mach/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -35,7 +35,7 @@ #include <linux/kernel.h> #include <linux/ioport.h> -#include <mach/cpu.h> +#include <plat/cpu.h> struct omap_device; diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/plat/omapfb.h index b226bdf45739..bfef7ab95f17 100644 --- a/arch/arm/plat-omap/include/mach/omapfb.h +++ b/arch/arm/plat-omap/include/plat/omapfb.h @@ -168,7 +168,7 @@ enum omapfb_update_mode { #include <linux/fb.h> #include <linux/mutex.h> -#include <mach/board.h> +#include <plat/board.h> #define OMAP_LCDC_INV_VSYNC 0x0001 #define OMAP_LCDC_INV_HSYNC 0x0002 diff --git a/arch/arm/plat-omap/include/mach/onenand.h b/arch/arm/plat-omap/include/plat/onenand.h index 72f433d7d827..72f433d7d827 100644 --- a/arch/arm/plat-omap/include/mach/onenand.h +++ b/arch/arm/plat-omap/include/plat/onenand.h diff --git a/arch/arm/plat-omap/include/mach/param.h b/arch/arm/plat-omap/include/plat/param.h index 1eb4dc326979..1eb4dc326979 100644 --- a/arch/arm/plat-omap/include/mach/param.h +++ b/arch/arm/plat-omap/include/plat/param.h diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/plat/powerdomain.h index fa6461423bd0..3d45ee1d3cf4 100644 --- a/arch/arm/plat-omap/include/mach/powerdomain.h +++ b/arch/arm/plat-omap/include/plat/powerdomain.h @@ -19,7 +19,7 @@ #include <asm/atomic.h> -#include <mach/cpu.h> +#include <plat/cpu.h> /* Powerdomain basic power states */ diff --git a/arch/arm/plat-omap/include/mach/prcm.h b/arch/arm/plat-omap/include/plat/prcm.h index cda2a70397b4..e63e94e18975 100644 --- a/arch/arm/plat-omap/include/mach/prcm.h +++ b/arch/arm/plat-omap/include/plat/prcm.h @@ -27,9 +27,13 @@ u32 omap_prcm_get_reset_sources(void); void omap_prcm_arch_reset(char mode); int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name); -#endif +#define START_PADCONF_SAVE 0x2 +#define PADCONF_SAVE_DONE 0x1 +void omap3_prcm_save_context(void); +void omap3_prcm_restore_context(void); +#endif diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h index 1c09c78a48f2..f704030d2a70 100644 --- a/arch/arm/plat-omap/include/mach/sdrc.h +++ b/arch/arm/plat-omap/include/plat/sdrc.h @@ -44,6 +44,12 @@ #define SDRC_RFR_CTRL_1 0x0D4 #define SDRC_MANUAL_1 0x0D8 +#define SDRC_POWER_AUTOCOUNT_SHIFT 8 +#define SDRC_POWER_AUTOCOUNT_MASK (0xffff << SDRC_POWER_AUTOCOUNT_SHIFT) +#define SDRC_POWER_CLKCTRL_SHIFT 4 +#define SDRC_POWER_CLKCTRL_MASK (0x3 << SDRC_POWER_CLKCTRL_SHIFT) +#define SDRC_SELF_REFRESH_ON_AUTOCOUNT (0x2 << SDRC_POWER_CLKCTRL_SHIFT) + /* * These values represent the number of memory clock cycles between * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192 @@ -80,11 +86,11 @@ */ #define OMAP242X_SMS_REGADDR(reg) \ - (void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE + reg) + (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg) #define OMAP243X_SMS_REGADDR(reg) \ - (void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE + reg) + (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg) #define OMAP343X_SMS_REGADDR(reg) \ - (void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE + reg) + (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg) /* SMS register offsets - read/write with sms_{read,write}_reg() */ @@ -120,6 +126,8 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, int omap2_sdrc_get_params(unsigned long r, struct omap_sdrc_params **sdrc_cs0, struct omap_sdrc_params **sdrc_cs1); +void omap2_sms_save_context(void); +void omap2_sms_restore_context(void); #ifdef CONFIG_ARCH_OMAP2 diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/plat/serial.h index e249186d26e2..e249186d26e2 100644 --- a/arch/arm/plat-omap/include/mach/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h diff --git a/arch/arm/plat-omap/include/mach/smp.h b/arch/arm/plat-omap/include/plat/smp.h index dcaa8fde7063..dcaa8fde7063 100644 --- a/arch/arm/plat-omap/include/mach/smp.h +++ b/arch/arm/plat-omap/include/plat/smp.h diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/plat/sram.h index 8974e3fc2691..16a1b458d53c 100644 --- a/arch/arm/plat-omap/include/mach/sram.h +++ b/arch/arm/plat-omap/include/plat/sram.h @@ -27,6 +27,7 @@ extern u32 omap3_configure_core_dpll( u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); +extern void omap3_sram_restore_context(void); /* Do not use these */ extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); @@ -68,4 +69,10 @@ extern u32 omap3_sram_configure_core_dpll( u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); extern unsigned long omap3_sram_configure_core_dpll_sz; +#ifdef CONFIG_PM +extern void omap_push_sram_idle(void); +#else +static inline void omap_push_sram_idle(void) {} +#endif /* CONFIG_PM */ + #endif diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/plat/system.h index ed8ec7477261..c58a4ef42a45 100644 --- a/arch/arm/plat-omap/include/mach/system.h +++ b/arch/arm/plat-omap/include/plat/system.h @@ -9,7 +9,7 @@ #include <asm/mach-types.h> #include <mach/hardware.h> -#include <mach/prcm.h> +#include <plat/prcm.h> #ifndef CONFIG_MACH_VOICEBLUE #define voiceblue_reset() do {} while (0) diff --git a/arch/arm/plat-omap/include/mach/tc.h b/arch/arm/plat-omap/include/plat/tc.h index d2fcd789bb9a..d2fcd789bb9a 100644 --- a/arch/arm/plat-omap/include/mach/tc.h +++ b/arch/arm/plat-omap/include/plat/tc.h diff --git a/arch/arm/plat-omap/include/mach/timer-gp.h b/arch/arm/plat-omap/include/plat/timer-gp.h index c88d346b59d9..c88d346b59d9 100644 --- a/arch/arm/plat-omap/include/mach/timer-gp.h +++ b/arch/arm/plat-omap/include/plat/timer-gp.h diff --git a/arch/arm/plat-omap/include/mach/timex.h b/arch/arm/plat-omap/include/plat/timex.h index 6d35767bc48f..6d35767bc48f 100644 --- a/arch/arm/plat-omap/include/mach/timex.h +++ b/arch/arm/plat-omap/include/plat/timex.h diff --git a/arch/arm/plat-omap/include/mach/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index 0814c5f210c3..e22f57564b59 100644 --- a/arch/arm/plat-omap/include/mach/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -19,12 +19,13 @@ #include <linux/types.h> #include <linux/serial_reg.h> -#include <mach/serial.h> +#include <plat/serial.h> unsigned int system_rev; #define UART_OMAP_MDR1 0x08 /* mode definition register */ #define OMAP_ID_730 0x355F +#define OMAP_ID_850 0x362C #define ID_MASK 0x7fff #define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0) #define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK @@ -53,7 +54,7 @@ static void putc(int c) /* MMU is not on, so cpu_is_omapXXXX() won't work here */ unsigned int omap_id = omap_get_id(); - if (omap_id == OMAP_ID_730) + if (omap_id == OMAP_ID_730 || omap_id == OMAP_ID_850) shift = 0; if (check_port(uart, shift)) diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/plat/usb.h index f337e1761e2c..33e72ca125d7 100644 --- a/arch/arm/plat-omap/include/mach/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -3,7 +3,7 @@ #ifndef __ASM_ARCH_OMAP_USB_H #define __ASM_ARCH_OMAP_USB_H -#include <mach/board.h> +#include <plat/board.h> /*-------------------------------------------------------------------------*/ diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c index b6defa23e77e..11f5d7961c73 100644 --- a/arch/arm/plat-omap/io.c +++ b/arch/arm/plat-omap/io.c @@ -13,12 +13,12 @@ #include <linux/io.h> #include <linux/mm.h> -#include <mach/omap730.h> -#include <mach/omap1510.h> -#include <mach/omap16xx.h> -#include <mach/omap24xx.h> -#include <mach/omap34xx.h> -#include <mach/omap44xx.h> +#include <plat/omap7xx.h> +#include <plat/omap1510.h> +#include <plat/omap16xx.h> +#include <plat/omap24xx.h> +#include <plat/omap34xx.h> +#include <plat/omap44xx.h> #define BETWEEN(p,st,sz) ((p) >= (st) && (p) < ((st) + (sz))) #define XLATE(p,pst,vst) ((void __iomem *)((p) - (pst) + (vst))) @@ -33,13 +33,13 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type) if (BETWEEN(p, OMAP1_IO_PHYS, OMAP1_IO_SIZE)) return XLATE(p, OMAP1_IO_PHYS, OMAP1_IO_VIRT); } - if (cpu_is_omap730()) { - if (BETWEEN(p, OMAP730_DSP_BASE, OMAP730_DSP_SIZE)) - return XLATE(p, OMAP730_DSP_BASE, OMAP730_DSP_START); + if (cpu_is_omap7xx()) { + if (BETWEEN(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_SIZE)) + return XLATE(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_START); - if (BETWEEN(p, OMAP730_DSPREG_BASE, OMAP730_DSPREG_SIZE)) - return XLATE(p, OMAP730_DSPREG_BASE, - OMAP730_DSPREG_START); + if (BETWEEN(p, OMAP7XX_DSPREG_BASE, OMAP7XX_DSPREG_SIZE)) + return XLATE(p, OMAP7XX_DSPREG_BASE, + OMAP7XX_DSPREG_START); } if (cpu_is_omap15xx()) { if (BETWEEN(p, OMAP1510_DSP_BASE, OMAP1510_DSP_SIZE)) @@ -114,6 +114,14 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type) return XLATE(p, L4_WK_44XX_PHYS, L4_WK_44XX_VIRT); if (BETWEEN(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_SIZE)) return XLATE(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_VIRT); + if (BETWEEN(p, OMAP44XX_EMIF1_PHYS, OMAP44XX_EMIF1_SIZE)) + return XLATE(p, OMAP44XX_EMIF1_PHYS, \ + OMAP44XX_EMIF1_VIRT); + if (BETWEEN(p, OMAP44XX_EMIF2_PHYS, OMAP44XX_EMIF2_SIZE)) + return XLATE(p, OMAP44XX_EMIF2_PHYS, \ + OMAP44XX_EMIF2_VIRT); + if (BETWEEN(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_SIZE)) + return XLATE(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_VIRT); if (BETWEEN(p, L4_PER_44XX_PHYS, L4_PER_44XX_SIZE)) return XLATE(p, L4_PER_44XX_PHYS, L4_PER_44XX_VIRT); if (BETWEEN(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_SIZE)) @@ -142,7 +150,7 @@ u8 omap_readb(u32 pa) if (cpu_class_is_omap1()) return __raw_readb(OMAP1_IO_ADDRESS(pa)); else - return __raw_readb(OMAP2_IO_ADDRESS(pa)); + return __raw_readb(OMAP2_L4_IO_ADDRESS(pa)); } EXPORT_SYMBOL(omap_readb); @@ -151,7 +159,7 @@ u16 omap_readw(u32 pa) if (cpu_class_is_omap1()) return __raw_readw(OMAP1_IO_ADDRESS(pa)); else - return __raw_readw(OMAP2_IO_ADDRESS(pa)); + return __raw_readw(OMAP2_L4_IO_ADDRESS(pa)); } EXPORT_SYMBOL(omap_readw); @@ -160,7 +168,7 @@ u32 omap_readl(u32 pa) if (cpu_class_is_omap1()) return __raw_readl(OMAP1_IO_ADDRESS(pa)); else - return __raw_readl(OMAP2_IO_ADDRESS(pa)); + return __raw_readl(OMAP2_L4_IO_ADDRESS(pa)); } EXPORT_SYMBOL(omap_readl); @@ -169,7 +177,7 @@ void omap_writeb(u8 v, u32 pa) if (cpu_class_is_omap1()) __raw_writeb(v, OMAP1_IO_ADDRESS(pa)); else - __raw_writeb(v, OMAP2_IO_ADDRESS(pa)); + __raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa)); } EXPORT_SYMBOL(omap_writeb); @@ -178,7 +186,7 @@ void omap_writew(u16 v, u32 pa) if (cpu_class_is_omap1()) __raw_writew(v, OMAP1_IO_ADDRESS(pa)); else - __raw_writew(v, OMAP2_IO_ADDRESS(pa)); + __raw_writew(v, OMAP2_L4_IO_ADDRESS(pa)); } EXPORT_SYMBOL(omap_writew); @@ -187,6 +195,6 @@ void omap_writel(u32 v, u32 pa) if (cpu_class_is_omap1()) __raw_writel(v, OMAP1_IO_ADDRESS(pa)); else - __raw_writel(v, OMAP2_IO_ADDRESS(pa)); + __raw_writel(v, OMAP2_L4_IO_ADDRESS(pa)); } EXPORT_SYMBOL(omap_writel); diff --git a/arch/arm/plat-omap/iommu-debug.c b/arch/arm/plat-omap/iommu-debug.c index c799b3b0d709..afd1c27cff7c 100644 --- a/arch/arm/plat-omap/iommu-debug.c +++ b/arch/arm/plat-omap/iommu-debug.c @@ -17,8 +17,8 @@ #include <linux/platform_device.h> #include <linux/debugfs.h> -#include <mach/iommu.h> -#include <mach/iovmm.h> +#include <plat/iommu.h> +#include <plat/iovmm.h> #include "iopgtable.h" diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c index 94584f167a82..c0ff1e39d893 100644 --- a/arch/arm/plat-omap/iommu.c +++ b/arch/arm/plat-omap/iommu.c @@ -20,7 +20,7 @@ #include <asm/cacheflush.h> -#include <mach/iommu.h> +#include <plat/iommu.h> #include "iopgtable.h" diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c index dc3fac3dd0ea..0ce36bbef9d2 100644 --- a/arch/arm/plat-omap/iovmm.c +++ b/arch/arm/plat-omap/iovmm.c @@ -18,8 +18,8 @@ #include <asm/cacheflush.h> #include <asm/mach/map.h> -#include <mach/iommu.h> -#include <mach/iovmm.h> +#include <plat/iommu.h> +#include <plat/iovmm.h> #include "iopgtable.h" diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c index 40424edae939..734bff332c82 100644 --- a/arch/arm/plat-omap/mailbox.c +++ b/arch/arm/plat-omap/mailbox.c @@ -26,7 +26,7 @@ #include <linux/device.h> #include <linux/delay.h> -#include <mach/mailbox.h> +#include <plat/mailbox.h> static int enable_seq_bit; module_param(enable_seq_bit, bool, 0); diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index e664b912d7bb..92770334d728 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -24,8 +24,8 @@ #include <linux/delay.h> #include <linux/io.h> -#include <mach/dma.h> -#include <mach/mcbsp.h> +#include <plat/dma.h> +#include <plat/mcbsp.h> struct omap_mcbsp **mcbsp_ptr; int omap_mcbsp_count; diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c index 8d329fb20740..05aebcad215b 100644 --- a/arch/arm/plat-omap/mux.c +++ b/arch/arm/plat-omap/mux.c @@ -28,7 +28,7 @@ #include <linux/io.h> #include <asm/system.h> #include <linux/spinlock.h> -#include <mach/mux.h> +#include <plat/mux.h> #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c index e98f0a2a6c26..186bca82cfab 100644 --- a/arch/arm/plat-omap/omap-pm-noop.c +++ b/arch/arm/plat-omap/omap-pm-noop.c @@ -22,9 +22,9 @@ #include <linux/device.h> /* Interface documentation is in mach/omap-pm.h */ -#include <mach/omap-pm.h> +#include <plat/omap-pm.h> -#include <mach/powerdomain.h> +#include <plat/powerdomain.h> struct omap_opp *dsp_opps; struct omap_opp *mpu_opps; diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index 2c409fc6dd21..bb16e624a557 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -82,8 +82,8 @@ #include <linux/err.h> #include <linux/io.h> -#include <mach/omap_device.h> -#include <mach/omap_hwmod.h> +#include <plat/omap_device.h> +#include <plat/omap_hwmod.h> /* These parameters are passed to _omap_device_{de,}activate() */ #define USE_WAKEUP_LAT 0 @@ -103,21 +103,6 @@ /* Private functions */ /** - * _read_32ksynct - read the OMAP 32K sync timer - * - * Returns the current value of the 32KiHz synchronization counter. - * XXX this should be generalized to simply read the system clocksource. - * XXX this should be moved to a separate synctimer32k.c file - */ -static u32 _read_32ksynct(void) -{ - if (!cpu_class_is_omap2()) - BUG(); - - return __raw_readl(OMAP2_IO_ADDRESS(OMAP_32KSYNCT_BASE + 0x010)); -} - -/** * _omap_device_activate - increase device readiness * @od: struct omap_device * * @ignore_lat: increase to latency target (0) or full readiness (1)? @@ -133,13 +118,13 @@ static u32 _read_32ksynct(void) */ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat) { - u32 a, b; + struct timespec a, b, c; pr_debug("omap_device: %s: activating\n", od->pdev.name); while (od->pm_lat_level > 0) { struct omap_device_pm_latency *odpl; - int act_lat = 0; + unsigned long long act_lat = 0; od->pm_lat_level--; @@ -149,20 +134,22 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat) (od->dev_wakeup_lat <= od->_dev_wakeup_lat_limit)) break; - a = _read_32ksynct(); + getnstimeofday(&a); /* XXX check return code */ odpl->activate_func(od); - b = _read_32ksynct(); + getnstimeofday(&b); - act_lat = (b - a) >> 15; /* 32KiHz cycles to microseconds */ + c = timespec_sub(b, a); + act_lat = timespec_to_ns(&c) * NSEC_PER_USEC; pr_debug("omap_device: %s: pm_lat %d: activate: elapsed time " - "%d usec\n", od->pdev.name, od->pm_lat_level, act_lat); + "%llu usec\n", od->pdev.name, od->pm_lat_level, + act_lat); WARN(act_lat > odpl->activate_lat, "omap_device: %s.%d: " - "activate step %d took longer than expected (%d > %d)\n", + "activate step %d took longer than expected (%llu > %d)\n", od->pdev.name, od->pdev.id, od->pm_lat_level, act_lat, odpl->activate_lat); @@ -188,13 +175,13 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat) */ static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat) { - u32 a, b; + struct timespec a, b, c; pr_debug("omap_device: %s: deactivating\n", od->pdev.name); while (od->pm_lat_level < od->pm_lats_cnt) { struct omap_device_pm_latency *odpl; - int deact_lat = 0; + unsigned long long deact_lat = 0; odpl = od->pm_lats + od->pm_lat_level; @@ -203,23 +190,24 @@ static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat) od->_dev_wakeup_lat_limit)) break; - a = _read_32ksynct(); + getnstimeofday(&a); /* XXX check return code */ odpl->deactivate_func(od); - b = _read_32ksynct(); + getnstimeofday(&b); - deact_lat = (b - a) >> 15; /* 32KiHz cycles to microseconds */ + c = timespec_sub(b, a); + deact_lat = timespec_to_ns(&c) * NSEC_PER_USEC; pr_debug("omap_device: %s: pm_lat %d: deactivate: elapsed time " - "%d usec\n", od->pdev.name, od->pm_lat_level, + "%llu usec\n", od->pdev.name, od->pm_lat_level, deact_lat); WARN(deact_lat > odpl->deactivate_lat, "omap_device: %s.%d: " - "deactivate step %d took longer than expected (%d > %d)\n", - od->pdev.name, od->pdev.id, od->pm_lat_level, - deact_lat, odpl->deactivate_lat); + "deactivate step %d took longer than expected " + "(%llu > %d)\n", od->pdev.name, od->pdev.id, + od->pm_lat_level, deact_lat, odpl->deactivate_lat); od->dev_wakeup_lat += odpl->activate_lat; diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 75d1f26e5b17..3e923668778d 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -25,11 +25,11 @@ #include <asm/mach/map.h> -#include <mach/sram.h> -#include <mach/board.h> -#include <mach/cpu.h> +#include <plat/sram.h> +#include <plat/board.h> +#include <plat/cpu.h> -#include <mach/control.h> +#include <plat/control.h> #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) # include "../mach-omap2/prm.h" @@ -41,14 +41,14 @@ #define OMAP1_SRAM_VA VMALLOC_END #define OMAP2_SRAM_PA 0x40200000 #define OMAP2_SRAM_PUB_PA 0x4020f800 -#define OMAP2_SRAM_VA 0xe3000000 +#define OMAP2_SRAM_VA 0xfe400000 #define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800) #define OMAP3_SRAM_PA 0x40200000 -#define OMAP3_SRAM_VA 0xe3000000 +#define OMAP3_SRAM_VA 0xfe400000 #define OMAP3_SRAM_PUB_PA 0x40208000 #define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000) #define OMAP4_SRAM_PA 0x40200000 /*0x402f0000*/ -#define OMAP4_SRAM_VA 0xd7000000 /*0xd70f0000*/ +#define OMAP4_SRAM_VA 0xfe400000 /*0xfe4f0000*/ #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) #define SRAM_BOOTLOADER_SZ 0x00 @@ -56,16 +56,16 @@ #define SRAM_BOOTLOADER_SZ 0x80 #endif -#define OMAP24XX_VA_REQINFOPERM0 OMAP2_IO_ADDRESS(0x68005048) -#define OMAP24XX_VA_READPERM0 OMAP2_IO_ADDRESS(0x68005050) -#define OMAP24XX_VA_WRITEPERM0 OMAP2_IO_ADDRESS(0x68005058) +#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048) +#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050) +#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058) -#define OMAP34XX_VA_REQINFOPERM0 OMAP2_IO_ADDRESS(0x68012848) -#define OMAP34XX_VA_READPERM0 OMAP2_IO_ADDRESS(0x68012850) -#define OMAP34XX_VA_WRITEPERM0 OMAP2_IO_ADDRESS(0x68012858) -#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_IO_ADDRESS(0x68012880) -#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_IO_ADDRESS(0x6C000048) -#define OMAP34XX_VA_CONTROL_STAT OMAP2_IO_ADDRESS(0x480022F0) +#define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848) +#define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850) +#define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858) +#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880) +#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048) +#define OMAP34XX_VA_CONTROL_STAT OMAP2_L4_IO_ADDRESS(0x480022F0) #define GP_DEVICE 0x300 @@ -396,22 +396,24 @@ u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc, sdrc_actim_ctrl_b_1, sdrc_mr_1); } -/* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */ -void restore_sram_functions(void) +#ifdef CONFIG_PM +void omap3_sram_restore_context(void) { omap_sram_ceil = omap_sram_base + omap_sram_size; _omap3_sram_configure_core_dpll = omap_sram_push(omap3_sram_configure_core_dpll, omap3_sram_configure_core_dpll_sz); + omap_push_sram_idle(); } +#endif /* CONFIG_PM */ int __init omap34xx_sram_init(void) { _omap3_sram_configure_core_dpll = omap_sram_push(omap3_sram_configure_core_dpll, omap3_sram_configure_core_dpll_sz); - + omap_push_sram_idle(); return 0; } #else diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index 509f2ed99e21..0ea1e0beb455 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -33,10 +33,10 @@ #include <asm/system.h> #include <mach/hardware.h> -#include <mach/control.h> -#include <mach/mux.h> -#include <mach/usb.h> -#include <mach/board.h> +#include <plat/control.h> +#include <plat/mux.h> +#include <plat/usb.h> +#include <plat/board.h> #ifdef CONFIG_ARCH_OMAP1 @@ -614,8 +614,8 @@ omap_otg_init(struct omap_usb_config *config) if (config->otg || config->register_host) { syscon &= ~HST_IDLE_EN; ohci_device.dev.platform_data = config; - if (cpu_is_omap730()) - ohci_resources[1].start = INT_730_USB_HHC_1; + if (cpu_is_omap7xx()) + ohci_resources[1].start = INT_7XX_USB_HHC_1; status = platform_device_register(&ohci_device); if (status) pr_debug("can't register OHCI device, %d\n", status); @@ -626,8 +626,8 @@ omap_otg_init(struct omap_usb_config *config) if (config->otg) { syscon &= ~OTG_IDLE_EN; otg_device.dev.platform_data = config; - if (cpu_is_omap730()) - otg_resources[1].start = INT_730_USB_OTG; + if (cpu_is_omap7xx()) + otg_resources[1].start = INT_7XX_USB_OTG; status = platform_device_register(&otg_device); if (status) pr_debug("can't register OTG device, %d\n", status); @@ -731,7 +731,7 @@ static inline void omap_1510_usb_init(struct omap_usb_config *config) {} void __init omap_usb_init(struct omap_usb_config *pdata) { - if (cpu_is_omap730() || cpu_is_omap16xx() || cpu_is_omap24xx()) + if (cpu_is_omap7xx() || cpu_is_omap16xx() || cpu_is_omap24xx()) omap_otg_init(pdata); else if (cpu_is_omap15xx()) omap_1510_usb_init(pdata); |