summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/x86/kernel/Makefile2
-rw-r--r--arch/x86/kernel/acpi/boot.c2
-rw-r--r--arch/x86/kernel/apic_32.c18
-rw-r--r--arch/x86/kernel/entry_32.S2
-rw-r--r--arch/x86/kernel/genx2apic_uv_x.c141
-rw-r--r--arch/x86/kernel/i8259.c (renamed from arch/x86/kernel/i8259_32.c)136
-rw-r--r--arch/x86/kernel/i8259_64.c512
-rw-r--r--arch/x86/kernel/io_apic_32.c4
-rw-r--r--arch/x86/kernel/io_apic_64.c6
-rw-r--r--arch/x86/kernel/irq_32.c216
-rw-r--r--arch/x86/kernel/irqinit_32.c114
-rw-r--r--arch/x86/kernel/irqinit_64.c217
-rw-r--r--arch/x86/kernel/vmiclock_32.c3
-rw-r--r--arch/x86/mach-visws/visws_apic.c3
14 files changed, 602 insertions, 774 deletions
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 5e618c3b4720..2a53ad2cb450 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -18,7 +18,7 @@ CFLAGS_tsc_64.o := $(nostackp)
obj-y := process_$(BITS).o signal_$(BITS).o entry_$(BITS).o
obj-y += traps_$(BITS).o irq_$(BITS).o
obj-y += time_$(BITS).o ioport.o ldt.o
-obj-y += setup_$(BITS).o i8259_$(BITS).o setup.o
+obj-y += setup_$(BITS).o i8259.o irqinit_$(BITS).o setup.o
obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o
obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o
obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o setup64.o
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 33c5216fd3e1..ff1a7b49a460 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -514,8 +514,6 @@ int acpi_register_gsi(u32 gsi, int triggering, int polarity)
* Make sure all (legacy) PCI IRQs are set as level-triggered.
*/
if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) {
- extern void eisa_set_level_irq(unsigned int irq);
-
if (triggering == ACPI_LEVEL_SENSITIVE)
eisa_set_level_irq(gsi);
}
diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c
index 4b99b1bdeb6c..d5767cb19d56 100644
--- a/arch/x86/kernel/apic_32.c
+++ b/arch/x86/kernel/apic_32.c
@@ -71,6 +71,10 @@ int local_apic_timer_disabled;
int local_apic_timer_c2_ok;
EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok);
+int first_system_vector = 0xfe;
+
+char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE};
+
/*
* Debug level, exported for io_apic.c
*/
@@ -1351,13 +1355,13 @@ void __init smp_intr_init(void)
* The reschedule interrupt is a CPU-to-CPU reschedule-helper
* IPI, driven by wakeup.
*/
- set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
+ alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
/* IPI for invalidation */
- set_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt);
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt);
/* IPI for generic function call */
- set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
+ alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
}
#endif
@@ -1370,15 +1374,15 @@ void __init apic_intr_init(void)
smp_intr_init();
#endif
/* self generated IPI for local APIC timer */
- set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
+ alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
/* IPI vectors for APIC spurious and error interrupts */
- set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
- set_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
+ alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
+ alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
/* thermal monitor LVT interrupt */
#ifdef CONFIG_X86_MCE_P4THERMAL
- set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
+ alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
#endif
}
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index c778e4fa55a2..159a1c76d2bd 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -51,7 +51,7 @@
#include <asm/percpu.h>
#include <asm/dwarf2.h>
#include <asm/processor-flags.h>
-#include "irq_vectors.h"
+#include <asm/irq_vectors.h>
/*
* We use macros for low-level operations which need to be overridden
diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
index ebf13908a743..45e84acca8a9 100644
--- a/arch/x86/kernel/genx2apic_uv_x.c
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -5,7 +5,7 @@
*
* SGI UV APIC functions (note: not an Intel compatible APIC)
*
- * Copyright (C) 2007 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved.
*/
#include <linux/threads.h>
@@ -55,37 +55,37 @@ static cpumask_t uv_vector_allocation_domain(int cpu)
int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip)
{
unsigned long val;
- int nasid;
+ int pnode;
- nasid = uv_apicid_to_nasid(phys_apicid);
+ pnode = uv_apicid_to_pnode(phys_apicid);
val = (1UL << UVH_IPI_INT_SEND_SHFT) |
(phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) |
(((long)start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) |
APIC_DM_INIT;
- uv_write_global_mmr64(nasid, UVH_IPI_INT, val);
+ uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
mdelay(10);
val = (1UL << UVH_IPI_INT_SEND_SHFT) |
(phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) |
(((long)start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) |
APIC_DM_STARTUP;
- uv_write_global_mmr64(nasid, UVH_IPI_INT, val);
+ uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
return 0;
}
static void uv_send_IPI_one(int cpu, int vector)
{
unsigned long val, apicid, lapicid;
- int nasid;
+ int pnode;
apicid = per_cpu(x86_cpu_to_apicid, cpu); /* ZZZ - cache node-local ? */
lapicid = apicid & 0x3f; /* ZZZ macro needed */
- nasid = uv_apicid_to_nasid(apicid);
+ pnode = uv_apicid_to_pnode(apicid);
val =
(1UL << UVH_IPI_INT_SEND_SHFT) | (lapicid <<
UVH_IPI_INT_APIC_ID_SHFT) |
(vector << UVH_IPI_INT_VECTOR_SHFT);
- uv_write_global_mmr64(nasid, UVH_IPI_INT, val);
+ uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
}
static void uv_send_IPI_mask(cpumask_t mask, int vector)
@@ -159,39 +159,81 @@ struct genapic apic_x2apic_uv_x = {
.phys_pkg_id = phys_pkg_id, /* Fixme ZZZ */
};
-static __cpuinit void set_x2apic_extra_bits(int nasid)
+static __cpuinit void set_x2apic_extra_bits(int pnode)
{
- __get_cpu_var(x2apic_extra_bits) = ((nasid >> 1) << 6);
+ __get_cpu_var(x2apic_extra_bits) = (pnode << 6);
}
/*
* Called on boot cpu.
*/
+static __init int boot_pnode_to_blade(int pnode)
+{
+ int blade;
+
+ for (blade = 0; blade < uv_num_possible_blades(); blade++)
+ if (pnode == uv_blade_info[blade].pnode)
+ return blade;
+ BUG();
+}
+
+struct redir_addr {
+ unsigned long redirect;
+ unsigned long alias;
+};
+
+#define DEST_SHIFT UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT
+
+static __initdata struct redir_addr redir_addrs[] = {
+ {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR, UVH_SI_ALIAS0_OVERLAY_CONFIG},
+ {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR, UVH_SI_ALIAS1_OVERLAY_CONFIG},
+ {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR, UVH_SI_ALIAS2_OVERLAY_CONFIG},
+};
+
+static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size)
+{
+ union uvh_si_alias0_overlay_config_u alias;
+ union uvh_rh_gam_alias210_redirect_config_2_mmr_u redirect;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(redir_addrs); i++) {
+ alias.v = uv_read_local_mmr(redir_addrs[i].alias);
+ if (alias.s.base == 0) {
+ *size = (1UL << alias.s.m_alias);
+ redirect.v = uv_read_local_mmr(redir_addrs[i].redirect);
+ *base = (unsigned long)redirect.s.dest_base << DEST_SHIFT;
+ return;
+ }
+ }
+ BUG();
+}
+
static __init void uv_system_init(void)
{
union uvh_si_addr_map_config_u m_n_config;
- int bytes, nid, cpu, lcpu, nasid, last_nasid, blade;
- unsigned long mmr_base;
+ union uvh_node_id_u node_id;
+ unsigned long gnode_upper, lowmem_redir_base, lowmem_redir_size;
+ int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val;
+ unsigned long mmr_base, present;
m_n_config.v = uv_read_local_mmr(UVH_SI_ADDR_MAP_CONFIG);
+ m_val = m_n_config.s.m_skt;
+ n_val = m_n_config.s.n_skt;
mmr_base =
uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR) &
~UV_MMR_ENABLE;
printk(KERN_DEBUG "UV: global MMR base 0x%lx\n", mmr_base);
- last_nasid = -1;
- for_each_possible_cpu(cpu) {
- nid = cpu_to_node(cpu);
- nasid = uv_apicid_to_nasid(per_cpu(x86_cpu_to_apicid, cpu));
- if (nasid != last_nasid)
- uv_possible_blades++;
- last_nasid = nasid;
- }
+ for(i = 0; i < UVH_NODE_PRESENT_TABLE_DEPTH; i++)
+ uv_possible_blades +=
+ hweight64(uv_read_local_mmr( UVH_NODE_PRESENT_TABLE + i * 8));
printk(KERN_DEBUG "UV: Found %d blades\n", uv_num_possible_blades());
bytes = sizeof(struct uv_blade_info) * uv_num_possible_blades();
uv_blade_info = alloc_bootmem_pages(bytes);
+ get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size);
+
bytes = sizeof(uv_node_to_blade[0]) * num_possible_nodes();
uv_node_to_blade = alloc_bootmem_pages(bytes);
memset(uv_node_to_blade, 255, bytes);
@@ -200,43 +242,56 @@ static __init void uv_system_init(void)
uv_cpu_to_blade = alloc_bootmem_pages(bytes);
memset(uv_cpu_to_blade, 255, bytes);
- last_nasid = -1;
- blade = -1;
- lcpu = -1;
- for_each_possible_cpu(cpu) {
- nid = cpu_to_node(cpu);
- nasid = uv_apicid_to_nasid(per_cpu(x86_cpu_to_apicid, cpu));
- if (nasid != last_nasid) {
- blade++;
- lcpu = -1;
- uv_blade_info[blade].nr_posible_cpus = 0;
+ blade = 0;
+ for (i = 0; i < UVH_NODE_PRESENT_TABLE_DEPTH; i++) {
+ present = uv_read_local_mmr(UVH_NODE_PRESENT_TABLE + i * 8);
+ for (j = 0; j < 64; j++) {
+ if (!test_bit(j, &present))
+ continue;
+ uv_blade_info[blade].pnode = (i * 64 + j);
+ uv_blade_info[blade].nr_possible_cpus = 0;
uv_blade_info[blade].nr_online_cpus = 0;
+ blade++;
}
- last_nasid = nasid;
- lcpu++;
+ }
- uv_cpu_hub_info(cpu)->m_val = m_n_config.s.m_skt;
- uv_cpu_hub_info(cpu)->n_val = m_n_config.s.n_skt;
+ node_id.v = uv_read_local_mmr(UVH_NODE_ID);
+ gnode_upper = (((unsigned long)node_id.s.node_id) &
+ ~((1 << n_val) - 1)) << m_val;
+
+ for_each_present_cpu(cpu) {
+ nid = cpu_to_node(cpu);
+ pnode = uv_apicid_to_pnode(per_cpu(x86_cpu_to_apicid, cpu));
+ blade = boot_pnode_to_blade(pnode);
+ lcpu = uv_blade_info[blade].nr_possible_cpus;
+ uv_blade_info[blade].nr_possible_cpus++;
+
+ uv_cpu_hub_info(cpu)->lowmem_remap_base = lowmem_redir_base;
+ uv_cpu_hub_info(cpu)->lowmem_remap_top =
+ lowmem_redir_base + lowmem_redir_size;
+ uv_cpu_hub_info(cpu)->m_val = m_val;
+ uv_cpu_hub_info(cpu)->n_val = m_val;
uv_cpu_hub_info(cpu)->numa_blade_id = blade;
uv_cpu_hub_info(cpu)->blade_processor_id = lcpu;
- uv_cpu_hub_info(cpu)->local_nasid = nasid;
- uv_cpu_hub_info(cpu)->gnode_upper =
- nasid & ~((1 << uv_hub_info->n_val) - 1);
+ uv_cpu_hub_info(cpu)->pnode = pnode;
+ uv_cpu_hub_info(cpu)->pnode_mask = (1 << n_val) - 1;
+ uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1;
+ uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper;
uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base;
uv_cpu_hub_info(cpu)->coherency_domain_number = 0;/* ZZZ */
- uv_blade_info[blade].nasid = nasid;
- uv_blade_info[blade].nr_posible_cpus++;
uv_node_to_blade[nid] = blade;
uv_cpu_to_blade[cpu] = blade;
- printk(KERN_DEBUG "UV cpu %d, apicid 0x%x, nasid %d, nid %d\n",
- cpu, per_cpu(x86_cpu_to_apicid, cpu), nasid, nid);
- printk(KERN_DEBUG "UV lcpu %d, blade %d\n", lcpu, blade);
+ printk(KERN_DEBUG "UV cpu %d, apicid 0x%x, pnode %d, nid %d, "
+ "lcpu %d, blade %d\n",
+ cpu, per_cpu(x86_cpu_to_apicid, cpu), pnode, nid,
+ lcpu, blade);
}
}
/*
* Called on each cpu to initialize the per_cpu UV data area.
+ * ZZZ hotplug not supported yet
*/
void __cpuinit uv_cpu_init(void)
{
@@ -246,5 +301,5 @@ void __cpuinit uv_cpu_init(void)
uv_blade_info[uv_numa_blade_id()].nr_online_cpus++;
if (get_uv_system_type() == UV_NON_UNIQUE_APIC)
- set_x2apic_extra_bits(uv_hub_info->local_nasid);
+ set_x2apic_extra_bits(uv_hub_info->pnode);
}
diff --git a/arch/x86/kernel/i8259_32.c b/arch/x86/kernel/i8259.c
index fe631967d625..dc92b49d9204 100644
--- a/arch/x86/kernel/i8259_32.c
+++ b/arch/x86/kernel/i8259.c
@@ -1,8 +1,10 @@
+#include <linux/linkage.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
+#include <linux/timex.h>
#include <linux/slab.h>
#include <linux/random.h>
#include <linux/init.h>
@@ -10,10 +12,12 @@
#include <linux/sysdev.h>
#include <linux/bitops.h>
+#include <asm/acpi.h>
#include <asm/atomic.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/timer.h>
+#include <asm/hw_irq.h>
#include <asm/pgtable.h>
#include <asm/delay.h>
#include <asm/desc.h>
@@ -32,7 +36,7 @@ static int i8259A_auto_eoi;
DEFINE_SPINLOCK(i8259A_lock);
static void mask_and_ack_8259A(unsigned int);
-static struct irq_chip i8259A_chip = {
+struct irq_chip i8259A_chip = {
.name = "XT-PIC",
.mask = disable_8259A_irq,
.disable = disable_8259A_irq,
@@ -125,14 +129,14 @@ static inline int i8259A_irq_real(unsigned int irq)
int irqmask = 1<<irq;
if (irq < 8) {
- outb(0x0B,PIC_MASTER_CMD); /* ISR register */
+ outb(0x0B, PIC_MASTER_CMD); /* ISR register */
value = inb(PIC_MASTER_CMD) & irqmask;
- outb(0x0A,PIC_MASTER_CMD); /* back to the IRR register */
+ outb(0x0A, PIC_MASTER_CMD); /* back to the IRR register */
return value;
}
- outb(0x0B,PIC_SLAVE_CMD); /* ISR register */
+ outb(0x0B, PIC_SLAVE_CMD); /* ISR register */
value = inb(PIC_SLAVE_CMD) & (irqmask >> 8);
- outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */
+ outb(0x0A, PIC_SLAVE_CMD); /* back to the IRR register */
return value;
}
@@ -171,12 +175,14 @@ handle_real_irq:
if (irq & 8) {
inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */
outb(cached_slave_mask, PIC_SLAVE_IMR);
- outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */
- outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */
+ /* 'Specific EOI' to slave */
+ outb(0x60+(irq&7), PIC_SLAVE_CMD);
+ /* 'Specific EOI' to master-IRQ2 */
+ outb(0x60+PIC_CASCADE_IR, PIC_MASTER_CMD);
} else {
inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */
outb(cached_master_mask, PIC_MASTER_IMR);
- outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */
+ outb(0x60+irq, PIC_MASTER_CMD); /* 'Specific EOI to master */
}
spin_unlock_irqrestore(&i8259A_lock, flags);
return;
@@ -199,7 +205,8 @@ spurious_8259A_irq:
* lets ACK and report it. [once per IRQ]
*/
if (!(spurious_irq_mask & irqmask)) {
- printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq);
+ printk(KERN_DEBUG
+ "spurious 8259A interrupt: IRQ%d.\n", irq);
spurious_irq_mask |= irqmask;
}
atomic_inc(&irq_err_count);
@@ -290,17 +297,28 @@ void init_8259A(int auto_eoi)
* outb_pic - this has to work on a wide range of PC hardware.
*/
outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */
- outb_pic(0x20 + 0, PIC_MASTER_IMR); /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */
- outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */
+
+ /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 on x86-64,
+ to 0x20-0x27 on i386 */
+ outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR);
+
+ /* 8259A-1 (the master) has a slave on IR2 */
+ outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR);
+
if (auto_eoi) /* master does Auto EOI */
outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR);
else /* master expects normal EOI */
outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR);
outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */
- outb_pic(0x20 + 8, PIC_SLAVE_IMR); /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */
- outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */
- outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */
+
+ /* ICW2: 8259A-2 IR0-7 mapped to IRQ8_VECTOR */
+ outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR);
+ /* 8259A-2 is a slave on master's IR2 */
+ outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR);
+ /* (slave's support for AEOI in flat mode is to be investigated) */
+ outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR);
+
if (auto_eoi)
/*
* In AEOI mode we just have to mask the interrupt
@@ -317,93 +335,3 @@ void init_8259A(int auto_eoi)
spin_unlock_irqrestore(&i8259A_lock, flags);
}
-
-/*
- * Note that on a 486, we don't want to do a SIGFPE on an irq13
- * as the irq is unreliable, and exception 16 works correctly
- * (ie as explained in the intel literature). On a 386, you
- * can't use exception 16 due to bad IBM design, so we have to
- * rely on the less exact irq13.
- *
- * Careful.. Not only is IRQ13 unreliable, but it is also
- * leads to races. IBM designers who came up with it should
- * be shot.
- */
-
-
-static irqreturn_t math_error_irq(int cpl, void *dev_id)
-{
- extern void math_error(void __user *);
- outb(0,0xF0);
- if (ignore_fpu_irq || !boot_cpu_data.hard_math)
- return IRQ_NONE;
- math_error((void __user *)get_irq_regs()->ip);
- return IRQ_HANDLED;
-}
-
-/*
- * New motherboards sometimes make IRQ 13 be a PCI interrupt,
- * so allow interrupt sharing.
- */
-static struct irqaction fpu_irq = {
- .handler = math_error_irq,
- .mask = CPU_MASK_NONE,
- .name = "fpu",
-};
-
-void __init init_ISA_irqs (void)
-{
- int i;
-
-#ifdef CONFIG_X86_LOCAL_APIC
- init_bsp_APIC();
-#endif
- init_8259A(0);
-
- /*
- * 16 old-style INTA-cycle interrupts:
- */
- for (i = 0; i < 16; i++) {
- set_irq_chip_and_handler_name(i, &i8259A_chip,
- handle_level_irq, "XT");
- }
-}
-
-/* Overridden in paravirt.c */
-void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
-
-void __init native_init_IRQ(void)
-{
- int i;
-
- /* all the set up before the call gates are initialised */
- pre_intr_init_hook();
-
- /*
- * Cover the whole vector space, no vector can escape
- * us. (some of these will be overridden and become
- * 'special' SMP interrupts)
- */
- for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) {
- int vector = FIRST_EXTERNAL_VECTOR + i;
- if (i >= NR_IRQS)
- break;
- /* SYSCALL_VECTOR was reserved in trap_init. */
- if (!test_bit(vector, used_vectors))
- set_intr_gate(vector, interrupt[i]);
- }
-
- /* setup after call gates are initialised (usually add in
- * the architecture specific gates)
- */
- intr_init_hook();
-
- /*
- * External FPU? Set up irq13 if so, for
- * original braindamaged IBM FERR coupling.
- */
- if (boot_cpu_data.hard_math && !cpu_has_fpu)
- setup_irq(FPU_IRQ, &fpu_irq);
-
- irq_ctx_init(smp_processor_id());
-}
diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c
deleted file mode 100644
index fa57a1568508..000000000000
--- a/arch/x86/kernel/i8259_64.c
+++ /dev/null
@@ -1,512 +0,0 @@
-#include <linux/linkage.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/sysdev.h>
-#include <linux/bitops.h>
-
-#include <asm/acpi.h>
-#include <asm/atomic.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/hw_irq.h>
-#include <asm/pgtable.h>
-#include <asm/delay.h>
-#include <asm/desc.h>
-#include <asm/apic.h>
-#include <asm/i8259.h>
-
-/*
- * Common place to define all x86 IRQ vectors
- *
- * This builds up the IRQ handler stubs using some ugly macros in irq.h
- *
- * These macros create the low-level assembly IRQ routines that save
- * register context and call do_IRQ(). do_IRQ() then does all the
- * operations that are needed to keep the AT (or SMP IOAPIC)
- * interrupt-controller happy.
- */
-
-#define BI(x,y) \
- BUILD_IRQ(x##y)
-
-#define BUILD_16_IRQS(x) \
- BI(x,0) BI(x,1) BI(x,2) BI(x,3) \
- BI(x,4) BI(x,5) BI(x,6) BI(x,7) \
- BI(x,8) BI(x,9) BI(x,a) BI(x,b) \
- BI(x,c) BI(x,d) BI(x,e) BI(x,f)
-
-/*
- * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
- * (these are usually mapped to vectors 0x30-0x3f)
- */
-
-/*
- * The IO-APIC gives us many more interrupt sources. Most of these
- * are unused but an SMP system is supposed to have enough memory ...
- * sometimes (mostly wrt. hw bugs) we get corrupted vectors all
- * across the spectrum, so we really want to be prepared to get all
- * of these. Plus, more powerful systems might have more than 64
- * IO-APIC registers.
- *
- * (these are usually mapped into the 0x30-0xff vector range)
- */
- BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3)
-BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7)
-BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb)
-BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf)
-
-#undef BUILD_16_IRQS
-#undef BI
-
-
-#define IRQ(x,y) \
- IRQ##x##y##_interrupt
-
-#define IRQLIST_16(x) \
- IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \
- IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \
- IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \
- IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f)
-
-/* for the irq vectors */
-static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = {
- IRQLIST_16(0x2), IRQLIST_16(0x3),
- IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7),
- IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb),
- IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf)
-};
-
-#undef IRQ
-#undef IRQLIST_16
-
-/*
- * This is the 'legacy' 8259A Programmable Interrupt Controller,
- * present in the majority of PC/AT boxes.
- * plus some generic x86 specific things if generic specifics makes
- * any sense at all.
- * this file should become arch/i386/kernel/irq.c when the old irq.c
- * moves to arch independent land
- */
-
-static int i8259A_auto_eoi;
-DEFINE_SPINLOCK(i8259A_lock);
-static void mask_and_ack_8259A(unsigned int);
-
-static struct irq_chip i8259A_chip = {
- .name = "XT-PIC",
- .mask = disable_8259A_irq,
- .disable = disable_8259A_irq,
- .unmask = enable_8259A_irq,
- .mask_ack = mask_and_ack_8259A,
-};
-
-/*
- * 8259A PIC functions to handle ISA devices:
- */
-
-/*
- * This contains the irq mask for both 8259A irq controllers,
- */
-unsigned int cached_irq_mask = 0xffff;
-
-/*
- * Not all IRQs can be routed through the IO-APIC, eg. on certain (older)
- * boards the timer interrupt is not really connected to any IO-APIC pin,
- * it's fed to the master 8259A's IR0 line only.
- *
- * Any '1' bit in this mask means the IRQ is routed through the IO-APIC.
- * this 'mixed mode' IRQ handling costs nothing because it's only used
- * at IRQ setup time.
- */
-unsigned long io_apic_irqs;
-
-void disable_8259A_irq(unsigned int irq)
-{
- unsigned int mask = 1 << irq;
- unsigned long flags;
-
- spin_lock_irqsave(&i8259A_lock, flags);
- cached_irq_mask |= mask;
- if (irq & 8)
- outb(cached_slave_mask, PIC_SLAVE_IMR);
- else
- outb(cached_master_mask, PIC_MASTER_IMR);
- spin_unlock_irqrestore(&i8259A_lock, flags);
-}
-
-void enable_8259A_irq(unsigned int irq)
-{
- unsigned int mask = ~(1 << irq);
- unsigned long flags;
-
- spin_lock_irqsave(&i8259A_lock, flags);
- cached_irq_mask &= mask;
- if (irq & 8)
- outb(cached_slave_mask, PIC_SLAVE_IMR);
- else
- outb(cached_master_mask, PIC_MASTER_IMR);
- spin_unlock_irqrestore(&i8259A_lock, flags);
-}
-
-int i8259A_irq_pending(unsigned int irq)
-{
- unsigned int mask = 1<<irq;
- unsigned long flags;
- int ret;
-
- spin_lock_irqsave(&i8259A_lock, flags);
- if (irq < 8)
- ret = inb(PIC_MASTER_CMD) & mask;
- else
- ret = inb(PIC_SLAVE_CMD) & (mask >> 8);
- spin_unlock_irqrestore(&i8259A_lock, flags);
-
- return ret;
-}
-
-void make_8259A_irq(unsigned int irq)
-{
- disable_irq_nosync(irq);
- io_apic_irqs &= ~(1<<irq);
- set_irq_chip_and_handler_name(irq, &i8259A_chip, handle_level_irq,
- "XT");
- enable_irq(irq);
-}
-
-/*
- * This function assumes to be called rarely. Switching between
- * 8259A registers is slow.
- * This has to be protected by the irq controller spinlock
- * before being called.
- */
-static inline int i8259A_irq_real(unsigned int irq)
-{
- int value;
- int irqmask = 1<<irq;
-
- if (irq < 8) {
- outb(0x0B,PIC_MASTER_CMD); /* ISR register */
- value = inb(PIC_MASTER_CMD) & irqmask;
- outb(0x0A,PIC_MASTER_CMD); /* back to the IRR register */
- return value;
- }
- outb(0x0B,PIC_SLAVE_CMD); /* ISR register */
- value = inb(PIC_SLAVE_CMD) & (irqmask >> 8);
- outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */
- return value;
-}
-
-/*
- * Careful! The 8259A is a fragile beast, it pretty
- * much _has_ to be done exactly like this (mask it
- * first, _then_ send the EOI, and the order of EOI
- * to the two 8259s is important!
- */
-static void mask_and_ack_8259A(unsigned int irq)
-{
- unsigned int irqmask = 1 << irq;
- unsigned long flags;
-
- spin_lock_irqsave(&i8259A_lock, flags);
- /*
- * Lightweight spurious IRQ detection. We do not want
- * to overdo spurious IRQ handling - it's usually a sign
- * of hardware problems, so we only do the checks we can
- * do without slowing down good hardware unnecessarily.
- *
- * Note that IRQ7 and IRQ15 (the two spurious IRQs
- * usually resulting from the 8259A-1|2 PICs) occur
- * even if the IRQ is masked in the 8259A. Thus we
- * can check spurious 8259A IRQs without doing the
- * quite slow i8259A_irq_real() call for every IRQ.
- * This does not cover 100% of spurious interrupts,
- * but should be enough to warn the user that there
- * is something bad going on ...
- */
- if (cached_irq_mask & irqmask)
- goto spurious_8259A_irq;
- cached_irq_mask |= irqmask;
-
-handle_real_irq:
- if (irq & 8) {
- inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */
- outb(cached_slave_mask, PIC_SLAVE_IMR);
- /* 'Specific EOI' to slave */
- outb(0x60+(irq&7),PIC_SLAVE_CMD);
- /* 'Specific EOI' to master-IRQ2 */
- outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD);
- } else {
- inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */
- outb(cached_master_mask, PIC_MASTER_IMR);
- /* 'Specific EOI' to master */
- outb(0x60+irq,PIC_MASTER_CMD);
- }
- spin_unlock_irqrestore(&i8259A_lock, flags);
- return;
-
-spurious_8259A_irq:
- /*
- * this is the slow path - should happen rarely.
- */
- if (i8259A_irq_real(irq))
- /*
- * oops, the IRQ _is_ in service according to the
- * 8259A - not spurious, go handle it.
- */
- goto handle_real_irq;
-
- {
- static int spurious_irq_mask;
- /*
- * At this point we can be sure the IRQ is spurious,
- * lets ACK and report it. [once per IRQ]
- */
- if (!(spurious_irq_mask & irqmask)) {
- printk(KERN_DEBUG
- "spurious 8259A interrupt: IRQ%d.\n", irq);
- spurious_irq_mask |= irqmask;
- }
- atomic_inc(&irq_err_count);
- /*
- * Theoretically we do not have to handle this IRQ,
- * but in Linux this does not cause problems and is
- * simpler for us.
- */
- goto handle_real_irq;
- }
-}
-
-static char irq_trigger[2];
-/**
- * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ
- */
-static void restore_ELCR(char *trigger)
-{
- outb(trigger[0], 0x4d0);
- outb(trigger[1], 0x4d1);
-}
-
-static void save_ELCR(char *trigger)
-{
- /* IRQ 0,1,2,8,13 are marked as reserved */
- trigger[0] = inb(0x4d0) & 0xF8;
- trigger[1] = inb(0x4d1) & 0xDE;
-}
-
-static int i8259A_resume(struct sys_device *dev)
-{
- init_8259A(i8259A_auto_eoi);
- restore_ELCR(irq_trigger);
- return 0;
-}
-
-static int i8259A_suspend(struct sys_device *dev, pm_message_t state)
-{
- save_ELCR(irq_trigger);
- return 0;
-}
-
-static int i8259A_shutdown(struct sys_device *dev)
-{
- /* Put the i8259A into a quiescent state that
- * the kernel initialization code can get it
- * out of.
- */
- outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */
- outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */
- return 0;
-}
-
-static struct sysdev_class i8259_sysdev_class = {
- .name = "i8259",
- .suspend = i8259A_suspend,
- .resume = i8259A_resume,
- .shutdown = i8259A_shutdown,
-};
-
-static struct sys_device device_i8259A = {
- .id = 0,
- .cls = &i8259_sysdev_class,
-};
-
-static int __init i8259A_init_sysfs(void)
-{
- int error = sysdev_class_register(&i8259_sysdev_class);
- if (!error)
- error = sysdev_register(&device_i8259A);
- return error;
-}
-
-device_initcall(i8259A_init_sysfs);
-
-void init_8259A(int auto_eoi)
-{
- unsigned long flags;
-
- i8259A_auto_eoi = auto_eoi;
-
- spin_lock_irqsave(&i8259A_lock, flags);
-
- outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */
- outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */
-
- /*
- * outb_pic - this has to work on a wide range of PC hardware.
- */
- outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */
- /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */
- outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR);
- /* 8259A-1 (the master) has a slave on IR2 */
- outb_pic(0x04, PIC_MASTER_IMR);
- if (auto_eoi) /* master does Auto EOI */
- outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR);
- else /* master expects normal EOI */
- outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR);
-
- outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */
- /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */
- outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR);
- /* 8259A-2 is a slave on master's IR2 */
- outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR);
- /* (slave's support for AEOI in flat mode is to be investigated) */
- outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR);
-
- if (auto_eoi)
- /*
- * In AEOI mode we just have to mask the interrupt
- * when acking.
- */
- i8259A_chip.mask_ack = disable_8259A_irq;
- else
- i8259A_chip.mask_ack = mask_and_ack_8259A;
-
- udelay(100); /* wait for 8259A to initialize */
-
- outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */
- outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */
-
- spin_unlock_irqrestore(&i8259A_lock, flags);
-}
-
-
-
-
-/*
- * IRQ2 is cascade interrupt to second interrupt controller
- */
-
-static struct irqaction irq2 = {
- .handler = no_action,
- .mask = CPU_MASK_NONE,
- .name = "cascade",
-};
-DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
- [0 ... IRQ0_VECTOR - 1] = -1,
- [IRQ0_VECTOR] = 0,
- [IRQ1_VECTOR] = 1,
- [IRQ2_VECTOR] = 2,
- [IRQ3_VECTOR] = 3,
- [IRQ4_VECTOR] = 4,
- [IRQ5_VECTOR] = 5,
- [IRQ6_VECTOR] = 6,
- [IRQ7_VECTOR] = 7,
- [IRQ8_VECTOR] = 8,
- [IRQ9_VECTOR] = 9,
- [IRQ10_VECTOR] = 10,
- [IRQ11_VECTOR] = 11,
- [IRQ12_VECTOR] = 12,
- [IRQ13_VECTOR] = 13,
- [IRQ14_VECTOR] = 14,
- [IRQ15_VECTOR] = 15,
- [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1
-};
-
-void __init init_ISA_irqs (void)
-{
- int i;
-
- init_bsp_APIC();
- init_8259A(0);
-
- for (i = 0; i < NR_IRQS; i++) {
- irq_desc[i].status = IRQ_DISABLED;
- irq_desc[i].action = NULL;
- irq_desc[i].depth = 1;
-
- if (i < 16) {
- /*
- * 16 old-style INTA-cycle interrupts:
- */
- set_irq_chip_and_handler_name(i, &i8259A_chip,
- handle_level_irq, "XT");
- } else {
- /*
- * 'high' PCI IRQs filled in on demand
- */
- irq_desc[i].chip = &no_irq_chip;
- }
- }
-}
-
-void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
-
-void __init native_init_IRQ(void)
-{
- int i;
-
- init_ISA_irqs();
- /*
- * Cover the whole vector space, no vector can escape
- * us. (some of these will be overridden and become
- * 'special' SMP interrupts)
- */
- for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) {
- int vector = FIRST_EXTERNAL_VECTOR + i;
- if (vector != IA32_SYSCALL_VECTOR)
- set_intr_gate(vector, interrupt[i]);
- }
-
-#ifdef CONFIG_SMP
- /*
- * The reschedule interrupt is a CPU-to-CPU reschedule-helper
- * IPI, driven by wakeup.
- */
- set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
-
- /* IPIs for invalidation */
- set_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0);
- set_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1);
- set_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2);
- set_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3);
- set_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4);
- set_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5);
- set_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6);
- set_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7);
-
- /* IPI for generic function call */
- set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
-
- /* Low priority IPI to cleanup after moving an irq */
- set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
-#endif
- set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
- set_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
-
- /* self generated IPI for local APIC timer */
- set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
-
- /* IPI vectors for APIC spurious and error interrupts */
- set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
- set_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
-
- if (!acpi_ioapic)
- setup_irq(2, &irq2);
-}
diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c
index 4dc8600d9d20..0774b231a28b 100644
--- a/arch/x86/kernel/io_apic_32.c
+++ b/arch/x86/kernel/io_apic_32.c
@@ -1176,7 +1176,7 @@ static int __assign_irq_vector(int irq)
offset = current_offset;
next:
vector += 8;
- if (vector >= FIRST_SYSTEM_VECTOR) {
+ if (vector >= first_system_vector) {
offset = (offset + 1) % 8;
vector = FIRST_DEVICE_VECTOR + offset;
}
@@ -2261,7 +2261,7 @@ void __init setup_IO_APIC(void)
int i;
/* Reserve all the system vectors. */
- for (i = FIRST_SYSTEM_VECTOR; i < NR_VECTORS; i++)
+ for (i = first_system_vector; i < NR_VECTORS; i++)
set_bit(i, used_vectors);
enable_IO_APIC();
diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c
index ef1a8dfcc529..f1e1ae3e5c7d 100644
--- a/arch/x86/kernel/io_apic_64.c
+++ b/arch/x86/kernel/io_apic_64.c
@@ -82,6 +82,10 @@ struct irq_cfg irq_cfg[NR_IRQS] __read_mostly = {
static int assign_irq_vector(int irq, cpumask_t mask);
+int first_system_vector = 0xfe;
+
+char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE};
+
#define __apicdebuginit __init
int sis_apic_bug; /* not actually supported, dummy for compile */
@@ -730,7 +734,7 @@ static int __assign_irq_vector(int irq, cpumask_t mask)
offset = current_offset;
next:
vector += 8;
- if (vector >= FIRST_SYSTEM_VECTOR) {
+ if (vector >= first_system_vector) {
/* If we run out of vectors on large boxen, must share them. */
offset = (offset + 1) % 8;
vector = FIRST_DEVICE_VECTOR + offset;
diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index 147352df28b9..4e3e8ec60276 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -48,6 +48,29 @@ void ack_bad_irq(unsigned int irq)
#endif
}
+#ifdef CONFIG_DEBUG_STACKOVERFLOW
+/* Debugging check for stack overflow: is there less than 1KB free? */
+static int check_stack_overflow(void)
+{
+ long sp;
+
+ __asm__ __volatile__("andl %%esp,%0" :
+ "=r" (sp) : "0" (THREAD_SIZE - 1));
+
+ return sp < (sizeof(struct thread_info) + STACK_WARN);
+}
+
+static void print_stack_overflow(void)
+{
+ printk(KERN_WARNING "low stack detected by irq handler\n");
+ dump_stack();
+}
+
+#else
+static inline int check_stack_overflow(void) { return 0; }
+static inline void print_stack_overflow(void) { }
+#endif
+
#ifdef CONFIG_4KSTACKS
/*
* per-CPU IRQ handling contexts (thread information and stack)
@@ -59,48 +82,29 @@ union irq_ctx {
static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly;
static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly;
-#endif
-/*
- * do_IRQ handles all normal device IRQ's (the special
- * SMP cross-CPU interrupts have their own specific
- * handlers).
- */
-unsigned int do_IRQ(struct pt_regs *regs)
-{
- struct pt_regs *old_regs;
- /* high bit used in ret_from_ code */
- int irq = ~regs->orig_ax;
- struct irq_desc *desc = irq_desc + irq;
-#ifdef CONFIG_4KSTACKS
- union irq_ctx *curctx, *irqctx;
- u32 *isp;
-#endif
+static char softirq_stack[NR_CPUS * THREAD_SIZE]
+ __attribute__((__section__(".bss.page_aligned")));
- if (unlikely((unsigned)irq >= NR_IRQS)) {
- printk(KERN_EMERG "%s: cannot handle IRQ %d\n",
- __func__, irq);
- BUG();
- }
+static char hardirq_stack[NR_CPUS * THREAD_SIZE]
+ __attribute__((__section__(".bss.page_aligned")));
- old_regs = set_irq_regs(regs);
- irq_enter();
-#ifdef CONFIG_DEBUG_STACKOVERFLOW
- /* Debugging check for stack overflow: is there less than 1KB free? */
- {
- long sp;
-
- __asm__ __volatile__("andl %%esp,%0" :
- "=r" (sp) : "0" (THREAD_SIZE - 1));
- if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) {
- printk("do_IRQ: stack overflow: %ld\n",
- sp - sizeof(struct thread_info));
- dump_stack();
- }
- }
-#endif
+static void call_on_stack(void *func, void *stack)
+{
+ asm volatile("xchgl %%ebx,%%esp \n"
+ "call *%%edi \n"
+ "movl %%ebx,%%esp \n"
+ : "=b" (stack)
+ : "0" (stack),
+ "D"(func)
+ : "memory", "cc", "edx", "ecx", "eax");
+}
-#ifdef CONFIG_4KSTACKS
+static inline int
+execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq)
+{
+ union irq_ctx *curctx, *irqctx;
+ u32 *isp, arg1, arg2;
curctx = (union irq_ctx *) current_thread_info();
irqctx = hardirq_ctx[smp_processor_id()];
@@ -111,52 +115,39 @@ unsigned int do_IRQ(struct pt_regs *regs)
* handler) we can't do that and just have to keep using the
* current stack (which is the irq stack already after all)
*/
- if (curctx != irqctx) {
- int arg1, arg2, bx;
+ if (unlikely(curctx == irqctx))
+ return 0;
- /* build the stack frame on the IRQ stack */
- isp = (u32*) ((char*)irqctx + sizeof(*irqctx));
- irqctx->tinfo.task = curctx->tinfo.task;
- irqctx->tinfo.previous_esp = current_stack_pointer;
+ /* build the stack frame on the IRQ stack */
+ isp = (u32 *) ((char*)irqctx + sizeof(*irqctx));
+ irqctx->tinfo.task = curctx->tinfo.task;
+ irqctx->tinfo.previous_esp = current_stack_pointer;
- /*
- * Copy the softirq bits in preempt_count so that the
- * softirq checks work in the hardirq context.
- */
- irqctx->tinfo.preempt_count =
- (irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) |
- (curctx->tinfo.preempt_count & SOFTIRQ_MASK);
-
- asm volatile(
- " xchgl %%ebx,%%esp \n"
- " call *%%edi \n"
- " movl %%ebx,%%esp \n"
- : "=a" (arg1), "=d" (arg2), "=b" (bx)
- : "0" (irq), "1" (desc), "2" (isp),
- "D" (desc->handle_irq)
- : "memory", "cc", "ecx"
- );
- } else
-#endif
- desc->handle_irq(irq, desc);
-
- irq_exit();
- set_irq_regs(old_regs);
+ /*
+ * Copy the softirq bits in preempt_count so that the
+ * softirq checks work in the hardirq context.
+ */
+ irqctx->tinfo.preempt_count =
+ (irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) |
+ (curctx->tinfo.preempt_count & SOFTIRQ_MASK);
+
+ if (unlikely(overflow))
+ call_on_stack(print_stack_overflow, isp);
+
+ asm volatile("xchgl %%ebx,%%esp \n"
+ "call *%%edi \n"
+ "movl %%ebx,%%esp \n"
+ : "=a" (arg1), "=d" (arg2), "=b" (isp)
+ : "0" (irq), "1" (desc), "2" (isp),
+ "D" (desc->handle_irq)
+ : "memory", "cc", "ecx");
return 1;
}
-#ifdef CONFIG_4KSTACKS
-
-static char softirq_stack[NR_CPUS * THREAD_SIZE]
- __attribute__((__section__(".bss.page_aligned")));
-
-static char hardirq_stack[NR_CPUS * THREAD_SIZE]
- __attribute__((__section__(".bss.page_aligned")));
-
/*
* allocate per-cpu stacks for hardirq and for softirq processing
*/
-void irq_ctx_init(int cpu)
+void __cpuinit irq_ctx_init(int cpu)
{
union irq_ctx *irqctx;
@@ -164,25 +155,25 @@ void irq_ctx_init(int cpu)
return;
irqctx = (union irq_ctx*) &hardirq_stack[cpu*THREAD_SIZE];
- irqctx->tinfo.task = NULL;
- irqctx->tinfo.exec_domain = NULL;
- irqctx->tinfo.cpu = cpu;
- irqctx->tinfo.preempt_count = HARDIRQ_OFFSET;
- irqctx->tinfo.addr_limit = MAKE_MM_SEG(0);
+ irqctx->tinfo.task = NULL;
+ irqctx->tinfo.exec_domain = NULL;
+ irqctx->tinfo.cpu = cpu;
+ irqctx->tinfo.preempt_count = HARDIRQ_OFFSET;
+ irqctx->tinfo.addr_limit = MAKE_MM_SEG(0);
hardirq_ctx[cpu] = irqctx;
irqctx = (union irq_ctx*) &softirq_stack[cpu*THREAD_SIZE];
- irqctx->tinfo.task = NULL;
- irqctx->tinfo.exec_domain = NULL;
- irqctx->tinfo.cpu = cpu;
- irqctx->tinfo.preempt_count = 0;
- irqctx->tinfo.addr_limit = MAKE_MM_SEG(0);
+ irqctx->tinfo.task = NULL;
+ irqctx->tinfo.exec_domain = NULL;
+ irqctx->tinfo.cpu = cpu;
+ irqctx->tinfo.preempt_count = 0;
+ irqctx->tinfo.addr_limit = MAKE_MM_SEG(0);
softirq_ctx[cpu] = irqctx;
- printk("CPU %u irqstacks, hard=%p soft=%p\n",
- cpu,hardirq_ctx[cpu],softirq_ctx[cpu]);
+ printk(KERN_DEBUG "CPU %u irqstacks, hard=%p soft=%p\n",
+ cpu,hardirq_ctx[cpu],softirq_ctx[cpu]);
}
void irq_ctx_exit(int cpu)
@@ -211,25 +202,56 @@ asmlinkage void do_softirq(void)
/* build the stack frame on the softirq stack */
isp = (u32*) ((char*)irqctx + sizeof(*irqctx));
- asm volatile(
- " xchgl %%ebx,%%esp \n"
- " call __do_softirq \n"
- " movl %%ebx,%%esp \n"
- : "=b"(isp)
- : "0"(isp)
- : "memory", "cc", "edx", "ecx", "eax"
- );
+ call_on_stack(__do_softirq, isp);
/*
* Shouldnt happen, we returned above if in_interrupt():
- */
+ */
WARN_ON_ONCE(softirq_count());
}
local_irq_restore(flags);
}
+
+#else
+static inline int
+execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq) { return 0; }
#endif
/*
+ * do_IRQ handles all normal device IRQ's (the special
+ * SMP cross-CPU interrupts have their own specific
+ * handlers).
+ */
+unsigned int do_IRQ(struct pt_regs *regs)
+{
+ struct pt_regs *old_regs;
+ /* high bit used in ret_from_ code */
+ int overflow, irq = ~regs->orig_ax;
+ struct irq_desc *desc = irq_desc + irq;
+
+ if (unlikely((unsigned)irq >= NR_IRQS)) {
+ printk(KERN_EMERG "%s: cannot handle IRQ %d\n",
+ __func__, irq);
+ BUG();
+ }
+
+ old_regs = set_irq_regs(regs);
+ irq_enter();
+
+ overflow = check_stack_overflow();
+
+ if (!execute_on_irq_stack(overflow, desc, irq)) {
+ if (unlikely(overflow))
+ print_stack_overflow();
+ desc->handle_irq(irq, desc);
+ }
+
+ irq_exit();
+ set_irq_regs(old_regs);
+ return 1;
+}
+
+/*
* Interrupt statistics:
*/
diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c
new file mode 100644
index 000000000000..d66914287ee1
--- /dev/null
+++ b/arch/x86/kernel/irqinit_32.c
@@ -0,0 +1,114 @@
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/sysdev.h>
+#include <linux/bitops.h>
+
+#include <asm/atomic.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/timer.h>
+#include <asm/pgtable.h>
+#include <asm/delay.h>
+#include <asm/desc.h>
+#include <asm/apic.h>
+#include <asm/arch_hooks.h>
+#include <asm/i8259.h>
+
+
+
+/*
+ * Note that on a 486, we don't want to do a SIGFPE on an irq13
+ * as the irq is unreliable, and exception 16 works correctly
+ * (ie as explained in the intel literature). On a 386, you
+ * can't use exception 16 due to bad IBM design, so we have to
+ * rely on the less exact irq13.
+ *
+ * Careful.. Not only is IRQ13 unreliable, but it is also
+ * leads to races. IBM designers who came up with it should
+ * be shot.
+ */
+
+
+static irqreturn_t math_error_irq(int cpl, void *dev_id)
+{
+ extern void math_error(void __user *);
+ outb(0,0xF0);
+ if (ignore_fpu_irq || !boot_cpu_data.hard_math)
+ return IRQ_NONE;
+ math_error((void __user *)get_irq_regs()->ip);
+ return IRQ_HANDLED;
+}
+
+/*
+ * New motherboards sometimes make IRQ 13 be a PCI interrupt,
+ * so allow interrupt sharing.
+ */
+static struct irqaction fpu_irq = {
+ .handler = math_error_irq,
+ .mask = CPU_MASK_NONE,
+ .name = "fpu",
+};
+
+void __init init_ISA_irqs (void)
+{
+ int i;
+
+#ifdef CONFIG_X86_LOCAL_APIC
+ init_bsp_APIC();
+#endif
+ init_8259A(0);
+
+ /*
+ * 16 old-style INTA-cycle interrupts:
+ */
+ for (i = 0; i < 16; i++) {
+ set_irq_chip_and_handler_name(i, &i8259A_chip,
+ handle_level_irq, "XT");
+ }
+}
+
+/* Overridden in paravirt.c */
+void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
+
+void __init native_init_IRQ(void)
+{
+ int i;
+
+ /* all the set up before the call gates are initialised */
+ pre_intr_init_hook();
+
+ /*
+ * Cover the whole vector space, no vector can escape
+ * us. (some of these will be overridden and become
+ * 'special' SMP interrupts)
+ */
+ for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) {
+ int vector = FIRST_EXTERNAL_VECTOR + i;
+ if (i >= NR_IRQS)
+ break;
+ /* SYSCALL_VECTOR was reserved in trap_init. */
+ if (!test_bit(vector, used_vectors))
+ set_intr_gate(vector, interrupt[i]);
+ }
+
+ /* setup after call gates are initialised (usually add in
+ * the architecture specific gates)
+ */
+ intr_init_hook();
+
+ /*
+ * External FPU? Set up irq13 if so, for
+ * original braindamaged IBM FERR coupling.
+ */
+ if (boot_cpu_data.hard_math && !cpu_has_fpu)
+ setup_irq(FPU_IRQ, &fpu_irq);
+
+ irq_ctx_init(smp_processor_id());
+}
diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c
new file mode 100644
index 000000000000..31f49e8f46a7
--- /dev/null
+++ b/arch/x86/kernel/irqinit_64.c
@@ -0,0 +1,217 @@
+#include <linux/linkage.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/sysdev.h>
+#include <linux/bitops.h>
+
+#include <asm/acpi.h>
+#include <asm/atomic.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/hw_irq.h>
+#include <asm/pgtable.h>
+#include <asm/delay.h>
+#include <asm/desc.h>
+#include <asm/apic.h>
+#include <asm/i8259.h>
+
+/*
+ * Common place to define all x86 IRQ vectors
+ *
+ * This builds up the IRQ handler stubs using some ugly macros in irq.h
+ *
+ * These macros create the low-level assembly IRQ routines that save
+ * register context and call do_IRQ(). do_IRQ() then does all the
+ * operations that are needed to keep the AT (or SMP IOAPIC)
+ * interrupt-controller happy.
+ */
+
+#define IRQ_NAME2(nr) nr##_interrupt(void)
+#define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr)
+
+/*
+ * SMP has a few special interrupts for IPI messages
+ */
+
+#define BUILD_IRQ(nr) \
+ asmlinkage void IRQ_NAME(nr); \
+ asm("\n.p2align\n" \
+ "IRQ" #nr "_interrupt:\n\t" \
+ "push $~(" #nr ") ; " \
+ "jmp common_interrupt");
+
+#define BI(x,y) \
+ BUILD_IRQ(x##y)
+
+#define BUILD_16_IRQS(x) \
+ BI(x,0) BI(x,1) BI(x,2) BI(x,3) \
+ BI(x,4) BI(x,5) BI(x,6) BI(x,7) \
+ BI(x,8) BI(x,9) BI(x,a) BI(x,b) \
+ BI(x,c) BI(x,d) BI(x,e) BI(x,f)
+
+/*
+ * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
+ * (these are usually mapped to vectors 0x30-0x3f)
+ */
+
+/*
+ * The IO-APIC gives us many more interrupt sources. Most of these
+ * are unused but an SMP system is supposed to have enough memory ...
+ * sometimes (mostly wrt. hw bugs) we get corrupted vectors all
+ * across the spectrum, so we really want to be prepared to get all
+ * of these. Plus, more powerful systems might have more than 64
+ * IO-APIC registers.
+ *
+ * (these are usually mapped into the 0x30-0xff vector range)
+ */
+ BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3)
+BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7)
+BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb)
+BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf)
+
+#undef BUILD_16_IRQS
+#undef BI
+
+
+#define IRQ(x,y) \
+ IRQ##x##y##_interrupt
+
+#define IRQLIST_16(x) \
+ IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \
+ IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \
+ IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \
+ IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f)
+
+/* for the irq vectors */
+static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = {
+ IRQLIST_16(0x2), IRQLIST_16(0x3),
+ IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7),
+ IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb),
+ IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf)
+};
+
+#undef IRQ
+#undef IRQLIST_16
+
+
+
+
+/*
+ * IRQ2 is cascade interrupt to second interrupt controller
+ */
+
+static struct irqaction irq2 = {
+ .handler = no_action,
+ .mask = CPU_MASK_NONE,
+ .name = "cascade",
+};
+DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
+ [0 ... IRQ0_VECTOR - 1] = -1,
+ [IRQ0_VECTOR] = 0,
+ [IRQ1_VECTOR] = 1,
+ [IRQ2_VECTOR] = 2,
+ [IRQ3_VECTOR] = 3,
+ [IRQ4_VECTOR] = 4,
+ [IRQ5_VECTOR] = 5,
+ [IRQ6_VECTOR] = 6,
+ [IRQ7_VECTOR] = 7,
+ [IRQ8_VECTOR] = 8,
+ [IRQ9_VECTOR] = 9,
+ [IRQ10_VECTOR] = 10,
+ [IRQ11_VECTOR] = 11,
+ [IRQ12_VECTOR] = 12,
+ [IRQ13_VECTOR] = 13,
+ [IRQ14_VECTOR] = 14,
+ [IRQ15_VECTOR] = 15,
+ [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1
+};
+
+static void __init init_ISA_irqs (void)
+{
+ int i;
+
+ init_bsp_APIC();
+ init_8259A(0);
+
+ for (i = 0; i < NR_IRQS; i++) {
+ irq_desc[i].status = IRQ_DISABLED;
+ irq_desc[i].action = NULL;
+ irq_desc[i].depth = 1;
+
+ if (i < 16) {
+ /*
+ * 16 old-style INTA-cycle interrupts:
+ */
+ set_irq_chip_and_handler_name(i, &i8259A_chip,
+ handle_level_irq, "XT");
+ } else {
+ /*
+ * 'high' PCI IRQs filled in on demand
+ */
+ irq_desc[i].chip = &no_irq_chip;
+ }
+ }
+}
+
+void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
+
+void __init native_init_IRQ(void)
+{
+ int i;
+
+ init_ISA_irqs();
+ /*
+ * Cover the whole vector space, no vector can escape
+ * us. (some of these will be overridden and become
+ * 'special' SMP interrupts)
+ */
+ for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) {
+ int vector = FIRST_EXTERNAL_VECTOR + i;
+ if (vector != IA32_SYSCALL_VECTOR)
+ set_intr_gate(vector, interrupt[i]);
+ }
+
+#ifdef CONFIG_SMP
+ /*
+ * The reschedule interrupt is a CPU-to-CPU reschedule-helper
+ * IPI, driven by wakeup.
+ */
+ alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
+
+ /* IPIs for invalidation */
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0);
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1);
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2);
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3);
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4);
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5);
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6);
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7);
+
+ /* IPI for generic function call */
+ alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
+
+ /* Low priority IPI to cleanup after moving an irq */
+ set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
+#endif
+ alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
+ alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
+
+ /* self generated IPI for local APIC timer */
+ alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
+
+ /* IPI vectors for APIC spurious and error interrupts */
+ alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
+ alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
+
+ if (!acpi_ioapic)
+ setup_irq(2, &irq2);
+}
diff --git a/arch/x86/kernel/vmiclock_32.c b/arch/x86/kernel/vmiclock_32.c
index a2b030780aa9..ba7d19e102b1 100644
--- a/arch/x86/kernel/vmiclock_32.c
+++ b/arch/x86/kernel/vmiclock_32.c
@@ -33,8 +33,7 @@
#include <asm/apic.h>
#include <asm/timer.h>
#include <asm/i8253.h>
-
-#include <irq_vectors.h>
+#include <asm/irq_vectors.h>
#define VMI_ONESHOT (VMI_ALARM_IS_ONESHOT | VMI_CYCLES_REAL | vmi_get_alarm_wiring())
#define VMI_PERIODIC (VMI_ALARM_IS_PERIODIC | VMI_CYCLES_REAL | vmi_get_alarm_wiring())
diff --git a/arch/x86/mach-visws/visws_apic.c b/arch/x86/mach-visws/visws_apic.c
index cef9cb1d15ac..d8b2cfd85d92 100644
--- a/arch/x86/mach-visws/visws_apic.c
+++ b/arch/x86/mach-visws/visws_apic.c
@@ -21,10 +21,9 @@
#include <asm/io.h>
#include <asm/apic.h>
#include <asm/i8259.h>
+#include <asm/irq_vectors.h>
#include "cobalt.h"
-#include "irq_vectors.h"
-
static DEFINE_SPINLOCK(cobalt_lock);