diff options
Diffstat (limited to 'arch')
83 files changed, 2459 insertions, 1859 deletions
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index c88fd3584122..5a3152b75cdb 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -25,6 +25,8 @@ config BLACKFIN def_bool y select HAVE_ARCH_KGDB select HAVE_ARCH_TRACEHOOK + select HAVE_DYNAMIC_FTRACE + select HAVE_FTRACE_MCOUNT_RECORD select HAVE_FUNCTION_GRAPH_TRACER select HAVE_FUNCTION_TRACER select HAVE_FUNCTION_TRACE_MCOUNT_TEST @@ -32,6 +34,7 @@ config BLACKFIN select HAVE_KERNEL_GZIP if RAMKERNEL select HAVE_KERNEL_BZIP2 if RAMKERNEL select HAVE_KERNEL_LZMA if RAMKERNEL + select HAVE_KERNEL_LZO if RAMKERNEL select HAVE_OPROFILE select ARCH_WANT_OPTIONAL_GPIOLIB @@ -328,11 +331,6 @@ config BF53x depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537) default y -config MEM_GENERIC_BOARD - bool - depends on GENERIC_BOARD - default y - config MEM_MT48LC64M4A2FB_7E bool depends on (BFIN533_STAMP) @@ -850,6 +848,18 @@ config CPLB_SWITCH_TAB_L1 If enabled, the CPLB Switch Tables are linked into L1 data memory. (less latency) +config CACHE_FLUSH_L1 + bool "Locate cache flush funcs in L1 Inst Memory" + default y + help + If enabled, the Blackfin cache flushing functions are linked + into L1 instruction memory. + + Note that this might be required to address anomalies, but + these functions are pretty small, so it shouldn't be too bad. + If you are using a processor affected by an anomaly, the build + system will double check for you and prevent it. + config APP_STACK_L1 bool "Support locating application stack in L1 Scratch Memory" default y diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index 9d5ffaf5492a..3e65b0ffe084 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -140,7 +140,7 @@ archclean: INSTALL_PATH ?= /tftpboot boot := arch/$(ARCH)/boot -BOOT_TARGETS = vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma vmImage.xip +BOOT_TARGETS = vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma vmImage.lzo vmImage.xip PHONY += $(BOOT_TARGETS) install KBUILD_IMAGE := $(boot)/vmImage @@ -158,6 +158,7 @@ define archhelp echo ' vmImage.bz2 - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.bz2)' echo '* vmImage.gz - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.gz)' echo ' vmImage.lzma - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.lzma)' + echo ' vmImage.lzo - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.lzo)' echo ' vmImage.xip - XIP Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.xip)' echo ' install - Install kernel using' echo ' (your) ~/bin/$(INSTALLKERNEL) or' diff --git a/arch/blackfin/boot/Makefile b/arch/blackfin/boot/Makefile index d1b3d6051fdf..13d2dbd658e3 100644 --- a/arch/blackfin/boot/Makefile +++ b/arch/blackfin/boot/Makefile @@ -8,8 +8,8 @@ MKIMAGE := $(srctree)/scripts/mkuboot.sh -targets := vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma vmImage.xip -extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.xip +targets := vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma vmImage.lzo vmImage.xip +extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.lzo vmlinux.bin.xip UIMAGE_OPTS-y := UIMAGE_OPTS-$(CONFIG_RAMKERNEL) += -a $(CONFIG_BOOT_LOAD) @@ -33,6 +33,9 @@ $(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE $(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE $(call if_changed,lzma) +$(obj)/vmlinux.bin.lzo: $(obj)/vmlinux.bin FORCE + $(call if_changed,lzo) + # The mkimage tool wants 64bytes prepended to the image quiet_cmd_mk_bin_xip = BIN $@ cmd_mk_bin_xip = ( printf '%64s' | tr ' ' '\377' ; cat $< ) > $@ @@ -51,6 +54,9 @@ $(obj)/vmImage.gz: $(obj)/vmlinux.bin.gz $(obj)/vmImage.lzma: $(obj)/vmlinux.bin.lzma $(call if_changed,uimage,lzma) +$(obj)/vmImage.lzo: $(obj)/vmlinux.bin.lzo + $(call if_changed,uimage,lzo) + $(obj)/vmImage.xip: $(obj)/vmlinux.bin.xip $(call if_changed,uimage,none) @@ -58,6 +64,7 @@ suffix-y := bin suffix-$(CONFIG_KERNEL_GZIP) := gz suffix-$(CONFIG_KERNEL_BZIP2) := bz2 suffix-$(CONFIG_KERNEL_LZMA) := lzma +suffix-$(CONFIG_KERNEL_LZO) := lzo suffix-$(CONFIG_ROMKERNEL) := xip $(obj)/vmImage: $(obj)/vmImage.$(suffix-y) diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig index cf7c9bc94f13..01865033f70d 100644 --- a/arch/blackfin/configs/BF518F-EZBRD_defconfig +++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig @@ -1,7 +1,9 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32.2 +# Linux kernel version: 2.6.34.1 +# Sun Aug 1 22:52:24 2010 # +CONFIG_SYMBOL_PREFIX="_" # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y @@ -34,9 +36,11 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set # CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set @@ -49,6 +53,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -56,8 +61,6 @@ CONFIG_RCU_FANOUT=32 CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_GROUP_SCHED is not set -# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set @@ -66,6 +69,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -98,6 +102,7 @@ CONFIG_SLAB=y CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # # GCOV-based kernel profiling @@ -106,6 +111,7 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -122,14 +128,41 @@ CONFIG_BLOCK=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -185,6 +218,7 @@ CONFIG_BF_REV_0_0=y CONFIG_MEM_MT48LC32M8A2_75=y CONFIG_BF51x=y CONFIG_BFIN518F_EZBRD=y +# CONFIG_BFIN518F_TCM is not set # # BF518 Specific Configuration @@ -201,6 +235,11 @@ CONFIG_BF518_UART1_PORTF=y # CONFIG_BF518_UART1_PORTG is not set # +# Hysteresis/schmitt Trigger Control +# +# CONFIG_BFIN_HYSTERESIS_CONTROL is not set + +# # Interrupt Priority Assignment # @@ -288,8 +327,16 @@ CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y + +# +# Clock event device +# # CONFIG_TICKSOURCE_GPTMR0 is not set CONFIG_TICKSOURCE_CORETMR=y + +# +# Clock souce +# # CONFIG_CYCLES_CLOCKSOURCE is not set # CONFIG_GPTMR0_CLOCKSOURCE is not set # CONFIG_NO_HZ is not set @@ -320,12 +367,17 @@ CONFIG_ARITHMETIC_OPS_L1=y CONFIG_ACCESS_OK_L1=y # CONFIG_MEMSET_L1 is not set # CONFIG_MEMCPY_L1 is not set +CONFIG_STRCMP_L1=y +CONFIG_STRNCMP_L1=y +CONFIG_STRCPY_L1=y +CONFIG_STRNCPY_L1=y # CONFIG_SYS_BFIN_SPINLOCK_L1 is not set # CONFIG_IP_CHECKSUM_L1 is not set CONFIG_CACHELINE_ALIGNED_L1=y # CONFIG_SYSCALL_TAB_L1 is not set # CONFIG_CPLB_SWITCH_TAB_L1 is not set -CONFIG_APP_STACK_L1=y +CONFIG_CACHE_FLUSH_L1=y +# CONFIG_EXCEPTION_L1_SCRATCH is not set # # Speed Optimizations @@ -425,7 +477,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -486,6 +537,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set +# CONFIG_SIR_BFIN_DMA is not set +# CONFIG_SIR_BFIN_PIO is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set # CONFIG_WIRELESS is not set @@ -596,6 +649,10 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 @@ -609,6 +666,9 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set # @@ -619,12 +679,14 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_IWMC3200TOP is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -656,6 +718,7 @@ CONFIG_PHYLIB=y # CONFIG_NATIONAL_PHY is not set # CONFIG_STE10XP is not set # CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_MICREL_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -663,7 +726,6 @@ CONFIG_MII=y CONFIG_BFIN_MAC=y CONFIG_BFIN_TX_DESC_NUM=10 CONFIG_BFIN_RX_DESC_NUM=20 -# CONFIG_BFIN_MAC_RMII is not set CONFIG_BFIN_MAC_USE_HWSTAMP=y # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set @@ -702,32 +764,7 @@ CONFIG_BFIN_MAC_USE_HWSTAMP=y # # Input device support # -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -CONFIG_INPUT_MISC=y -# CONFIG_INPUT_UINPUT is not set -# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set -# CONFIG_INPUT_AD714X is not set -# CONFIG_INPUT_ADXL34X is not set -# CONFIG_INPUT_PCF8574 is not set +# CONFIG_INPUT is not set # # Hardware I/O ports @@ -745,11 +782,7 @@ CONFIG_BFIN_DMA_INTERFACE=m # CONFIG_BFIN_SPI_ADC is not set # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TWI_LCD is not set -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_VT is not set # CONFIG_DEVKMEM is not set CONFIG_BFIN_JTAG_COMM=m # CONFIG_SERIAL_NONSTANDARD is not set @@ -773,6 +806,7 @@ CONFIG_SERIAL_BFIN_UART0=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set @@ -801,6 +835,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -813,16 +848,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y @@ -835,6 +863,8 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_BFIN_SPORT is not set # CONFIG_SPI_BITBANG is not set # CONFIG_SPI_GPIO is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters @@ -854,10 +884,12 @@ CONFIG_GPIO_SYSFS=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set @@ -900,20 +932,25 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set +# CONFIG_AB4500_CORE is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -929,13 +966,7 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set -# CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set @@ -953,10 +984,8 @@ CONFIG_MMC_BLOCK_BOUNCE=y # MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set -# CONFIG_MMC_AT91 is not set -# CONFIG_MMC_ATMELMCI is not set # CONFIG_MMC_SPI is not set -CONFIG_SDH_BFIN=m +CONFIG_SDH_BFIN=y CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND=y # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -989,6 +1018,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1017,7 +1047,9 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1050,7 +1082,6 @@ CONFIG_EXT2_FS=m # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set @@ -1102,6 +1133,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1126,6 +1158,7 @@ CONFIG_SUNRPC=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1204,6 +1237,8 @@ CONFIG_SCHED_DEBUG=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set @@ -1227,17 +1262,20 @@ CONFIG_DEBUG_INFO=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_TRACEHOOK_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set -# CONFIG_BRANCH_PROFILE_NONE is not set -# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set -# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y @@ -1264,6 +1302,7 @@ CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y # CONFIG_BFIN_ISRAM_SELF_TEST is not set +# CONFIG_BFIN_PSEUDODBG_INSNS is not set # # Security options @@ -1273,8 +1312,12 @@ CONFIG_SECURITY=y # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set # CONFIG_SECURITY_PATH is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_SECURITY_TOMOYO is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig index 31c2a6db6ec5..d543f95f55ef 100644 --- a/arch/blackfin/configs/BF526-EZBRD_defconfig +++ b/arch/blackfin/configs/BF526-EZBRD_defconfig @@ -1,7 +1,8 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32.2 +# Linux kernel version: 2.6.34 # +CONFIG_SYMBOL_PREFIX="_" # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y @@ -37,6 +38,7 @@ CONFIG_HAVE_KERNEL_LZMA=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set # CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set @@ -49,6 +51,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -56,8 +59,6 @@ CONFIG_RCU_FANOUT=32 CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_GROUP_SCHED is not set -# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set @@ -66,6 +67,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -98,6 +100,7 @@ CONFIG_SLAB=y CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # # GCOV-based kernel profiling @@ -106,6 +109,7 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -122,14 +126,41 @@ CONFIG_BLOCK=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -232,6 +263,7 @@ CONFIG_BF52x=y # CONFIG_BFIN527_EZKIT_V2 is not set # CONFIG_BFIN527_BLUETECHNIX_CM is not set CONFIG_BFIN526_EZBRD=y +# CONFIG_BFIN527_AD7160EVAL is not set # # BF527 Specific Configuration @@ -294,8 +326,16 @@ CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y + +# +# Clock event device +# # CONFIG_TICKSOURCE_GPTMR0 is not set CONFIG_TICKSOURCE_CORETMR=y + +# +# Clock souce +# # CONFIG_CYCLES_CLOCKSOURCE is not set # CONFIG_GPTMR0_CLOCKSOURCE is not set # CONFIG_NO_HZ is not set @@ -326,12 +366,16 @@ CONFIG_ARITHMETIC_OPS_L1=y CONFIG_ACCESS_OK_L1=y # CONFIG_MEMSET_L1 is not set # CONFIG_MEMCPY_L1 is not set +CONFIG_STRCMP_L1=y +CONFIG_STRNCMP_L1=y +CONFIG_STRCPY_L1=y +CONFIG_STRNCPY_L1=y # CONFIG_SYS_BFIN_SPINLOCK_L1 is not set # CONFIG_IP_CHECKSUM_L1 is not set CONFIG_CACHELINE_ALIGNED_L1=y # CONFIG_SYSCALL_TAB_L1 is not set # CONFIG_CPLB_SWITCH_TAB_L1 is not set -CONFIG_APP_STACK_L1=y +CONFIG_CACHE_FLUSH_L1=y # # Speed Optimizations @@ -431,7 +475,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -614,6 +657,10 @@ CONFIG_MTD_NAND_IDS=m CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y @@ -628,6 +675,9 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set # @@ -644,6 +694,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -705,6 +756,7 @@ CONFIG_PHYLIB=y # CONFIG_NATIONAL_PHY is not set # CONFIG_STE10XP is not set # CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_MICREL_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -712,7 +764,6 @@ CONFIG_MII=y CONFIG_BFIN_MAC=y CONFIG_BFIN_TX_DESC_NUM=10 CONFIG_BFIN_RX_DESC_NUM=20 -CONFIG_BFIN_MAC_RMII=y # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set @@ -747,6 +798,7 @@ CONFIG_BFIN_MAC_RMII=y # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +# CONFIG_USB_IPHETH is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -762,6 +814,7 @@ CONFIG_BFIN_MAC_RMII=y CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -780,6 +833,7 @@ CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y +# CONFIG_INPUT_AD714X is not set # CONFIG_INPUT_ATI_REMOTE is not set # CONFIG_INPUT_ATI_REMOTE2 is not set # CONFIG_INPUT_KEYSPAN_REMOTE is not set @@ -787,11 +841,10 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_CM109 is not set # CONFIG_INPUT_UINPUT is not set +# CONFIG_INPUT_PCF8574 is not set # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set # CONFIG_INPUT_BFIN_ROTARY is not set -# CONFIG_INPUT_AD714X is not set # CONFIG_INPUT_ADXL34X is not set -# CONFIG_INPUT_PCF8574 is not set # # Hardware I/O ports @@ -837,6 +890,7 @@ CONFIG_SERIAL_BFIN_UART1=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set @@ -865,6 +919,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -878,16 +933,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y @@ -900,6 +948,8 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_BFIN_SPORT is not set # CONFIG_SPI_BITBANG is not set # CONFIG_SPI_GPIO is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters @@ -919,10 +969,12 @@ CONFIG_GPIO_SYSFS=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set @@ -960,10 +1012,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -975,6 +1028,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -1000,6 +1054,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set @@ -1013,6 +1068,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_LIS3_SPI is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1038,20 +1094,25 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set +# CONFIG_AB4500_CORE is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1087,6 +1148,7 @@ CONFIG_USB_HID=y # # Special HID drivers # +# CONFIG_HID_3M_PCT is not set CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y @@ -1102,14 +1164,19 @@ CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGIG940_FF is not set CONFIG_HID_MICROSOFT=y +# CONFIG_HID_MOSART is not set CONFIG_HID_MONTEREY=y # CONFIG_HID_NTRIG is not set +# CONFIG_HID_ORTEK is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y +# CONFIG_HID_QUANTA is not set CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y +# CONFIG_HID_STANTUM is not set CONFIG_HID_SUNPLUS=y # CONFIG_HID_GREENASIA is not set # CONFIG_HID_SMARTJOYPLUS is not set @@ -1130,7 +1197,6 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set CONFIG_USB_OTG_BLACKLIST_HUB=y CONFIG_USB_MON=y @@ -1214,7 +1280,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1227,7 +1292,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # @@ -1268,6 +1332,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1296,7 +1361,9 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1329,7 +1396,6 @@ CONFIG_EXT2_FS=m # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set @@ -1393,6 +1459,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1417,6 +1484,7 @@ CONFIG_SUNRPC=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1495,6 +1563,8 @@ CONFIG_SCHED_DEBUG=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set @@ -1518,17 +1588,18 @@ CONFIG_DEBUG_INFO=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_TRACEHOOK_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set -# CONFIG_BRANCH_PROFILE_NONE is not set -# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set -# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y @@ -1555,6 +1626,7 @@ CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y # CONFIG_BFIN_ISRAM_SELF_TEST is not set +# CONFIG_BFIN_PSEUDODBG_INSNS is not set # # Security options @@ -1564,9 +1636,12 @@ CONFIG_SECURITY=y # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set # CONFIG_SECURITY_PATH is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_SECURITY_ROOTPLUG is not set # CONFIG_SECURITY_TOMOYO is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/blackfin/configs/BF527-EZKIT-V2_defconfig b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig index d2dfcb0e7ce4..c59670901b82 100644 --- a/arch/blackfin/configs/BF527-EZKIT-V2_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig @@ -1,7 +1,8 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32.2 +# Linux kernel version: 2.6.34 # +CONFIG_SYMBOL_PREFIX="_" # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y @@ -37,6 +38,7 @@ CONFIG_HAVE_KERNEL_LZMA=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set # CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set @@ -49,6 +51,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -56,8 +59,6 @@ CONFIG_RCU_FANOUT=32 CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_GROUP_SCHED is not set -# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set @@ -66,6 +67,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -98,6 +100,7 @@ CONFIG_SLAB=y CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # # GCOV-based kernel profiling @@ -106,6 +109,7 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -122,14 +126,41 @@ CONFIG_BLOCK=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y # CONFIG_IOSCHED_DEADLINE is not set CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -232,6 +263,7 @@ CONFIG_BF52x=y CONFIG_BFIN527_EZKIT_V2=y # CONFIG_BFIN527_BLUETECHNIX_CM is not set # CONFIG_BFIN526_EZBRD is not set +# CONFIG_BFIN527_AD7160EVAL is not set # # BF527 Specific Configuration @@ -294,8 +326,16 @@ CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y + +# +# Clock event device +# # CONFIG_TICKSOURCE_GPTMR0 is not set CONFIG_TICKSOURCE_CORETMR=y + +# +# Clock souce +# # CONFIG_CYCLES_CLOCKSOURCE is not set # CONFIG_GPTMR0_CLOCKSOURCE is not set # CONFIG_NO_HZ is not set @@ -326,12 +366,16 @@ CONFIG_ARITHMETIC_OPS_L1=y CONFIG_ACCESS_OK_L1=y # CONFIG_MEMSET_L1 is not set # CONFIG_MEMCPY_L1 is not set +CONFIG_STRCMP_L1=y +CONFIG_STRNCMP_L1=y +CONFIG_STRCPY_L1=y +CONFIG_STRNCPY_L1=y # CONFIG_SYS_BFIN_SPINLOCK_L1 is not set # CONFIG_IP_CHECKSUM_L1 is not set CONFIG_CACHELINE_ALIGNED_L1=y # CONFIG_SYSCALL_TAB_L1 is not set # CONFIG_CPLB_SWITCH_TAB_L1 is not set -CONFIG_APP_STACK_L1=y +CONFIG_CACHE_FLUSH_L1=y # # Speed Optimizations @@ -431,7 +475,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -654,6 +697,10 @@ CONFIG_MTD_NAND_IDS=m CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y @@ -668,6 +715,9 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set # @@ -684,6 +734,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -745,6 +796,7 @@ CONFIG_PHYLIB=y # CONFIG_NATIONAL_PHY is not set # CONFIG_STE10XP is not set # CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_MICREL_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -753,7 +805,6 @@ CONFIG_BFIN_MAC=y CONFIG_BFIN_MAC_USE_L1=y CONFIG_BFIN_TX_DESC_NUM=10 CONFIG_BFIN_RX_DESC_NUM=20 -CONFIG_BFIN_MAC_RMII=y # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set @@ -788,6 +839,7 @@ CONFIG_BFIN_MAC_RMII=y # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +# CONFIG_USB_IPHETH is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -803,6 +855,7 @@ CONFIG_BFIN_MAC_RMII=y CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -836,8 +889,11 @@ CONFIG_KEYBOARD_ADP5520=y CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_ADS7846 is not set # CONFIG_TOUCHSCREEN_AD7877 is not set -CONFIG_TOUCHSCREEN_AD7879_I2C=y CONFIG_TOUCHSCREEN_AD7879=y +CONFIG_TOUCHSCREEN_AD7879_I2C=y +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7160 is not set +# CONFIG_TOUCHSCREEN_DYNAPRO is not set # CONFIG_TOUCHSCREEN_EETI is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set @@ -855,6 +911,7 @@ CONFIG_TOUCHSCREEN_AD7879=y # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_TOUCHSCREEN_TSC2007 is not set CONFIG_INPUT_MISC=y +# CONFIG_INPUT_AD714X is not set # CONFIG_INPUT_ATI_REMOTE is not set # CONFIG_INPUT_ATI_REMOTE2 is not set # CONFIG_INPUT_KEYSPAN_REMOTE is not set @@ -862,11 +919,10 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_CM109 is not set # CONFIG_INPUT_UINPUT is not set +# CONFIG_INPUT_PCF8574 is not set # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set # CONFIG_INPUT_BFIN_ROTARY is not set -# CONFIG_INPUT_AD714X is not set # CONFIG_INPUT_ADXL34X is not set -# CONFIG_INPUT_PCF8574 is not set # # Hardware I/O ports @@ -912,6 +968,7 @@ CONFIG_SERIAL_BFIN_UART1=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set @@ -940,6 +997,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -953,16 +1011,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y @@ -975,6 +1026,8 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_BFIN_SPORT is not set # CONFIG_SPI_BITBANG is not set # CONFIG_SPI_GPIO is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters @@ -994,10 +1047,12 @@ CONFIG_GPIO_SYSFS=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set @@ -1046,21 +1101,26 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_UCB1400_CORE is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set CONFIG_PMIC_ADP5520=y +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set +# CONFIG_AB4500_CORE is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1101,6 +1161,7 @@ CONFIG_FB_BFIN_LQ035Q1=y # CONFIG_FB_BROADSHEET is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_L4F00242T03 is not set # CONFIG_LCD_LMS283GF05 is not set # CONFIG_LCD_LTV350QV is not set # CONFIG_LCD_ILI9320 is not set @@ -1110,6 +1171,7 @@ CONFIG_LCD_CLASS_DEVICE=m CONFIG_BACKLIGHT_CLASS_DEVICE=m CONFIG_BACKLIGHT_GENERIC=m # CONFIG_BACKLIGHT_ADP5520 is not set +# CONFIG_BACKLIGHT_ADP8860 is not set # CONFIG_BACKLIGHT_ADP8870 is not set # @@ -1158,13 +1220,9 @@ CONFIG_SND_DRIVERS=y # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set CONFIG_SND_SPI=y - -# -# ALSA Blackfin devices -# -# CONFIG_SND_BFIN_AD73322 is not set CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_UA101 is not set # CONFIG_SND_USB_CAIAQ is not set CONFIG_SND_SOC=m CONFIG_SND_SOC_AC97_BUS=y @@ -1173,6 +1231,10 @@ CONFIG_SND_BF5XX_SOC_SSM2602=m # CONFIG_SND_BF5XX_SOC_AD73311 is not set # CONFIG_SND_BF5XX_SOC_ADAU1371 is not set # CONFIG_SND_BF5XX_SOC_ADAU1761 is not set +# CONFIG_SND_BF5XX_SOC_ADAU1361 is not set +# CONFIG_SND_BF5XX_SOC_ADAU1381 is not set +# CONFIG_SND_BF5XX_SOC_ADAU1373 is not set +# CONFIG_SND_BF5XX_SOC_ADAV80X is not set # CONFIG_SND_BF5XX_TDM is not set CONFIG_SND_BF5XX_AC97=m CONFIG_SND_BF5XX_MMAP_SUPPORT=y @@ -1203,6 +1265,7 @@ CONFIG_USB_HID=y # # Special HID drivers # +# CONFIG_HID_3M_PCT is not set CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y @@ -1218,14 +1281,19 @@ CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGIG940_FF is not set CONFIG_HID_MICROSOFT=y +# CONFIG_HID_MOSART is not set CONFIG_HID_MONTEREY=y # CONFIG_HID_NTRIG is not set +# CONFIG_HID_ORTEK is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y +# CONFIG_HID_QUANTA is not set CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y +# CONFIG_HID_STANTUM is not set CONFIG_HID_SUNPLUS=y # CONFIG_HID_GREENASIA is not set # CONFIG_HID_SMARTJOYPLUS is not set @@ -1246,7 +1314,6 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set CONFIG_USB_OTG_BLACKLIST_HUB=y CONFIG_USB_MON=y @@ -1330,7 +1397,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1343,7 +1409,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # @@ -1366,11 +1431,8 @@ CONFIG_LEDS_CLASS=y # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_DAC124S085 is not set # CONFIG_LEDS_BD2802 is not set +# CONFIG_LEDS_LT3593 is not set CONFIG_LEDS_ADP5520=y - -# -# LED Triggers -# # CONFIG_LEDS_TRIGGERS is not set # CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y @@ -1401,6 +1463,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1429,7 +1492,9 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1462,7 +1527,6 @@ CONFIG_EXT2_FS=m # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set @@ -1527,6 +1591,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1551,6 +1616,7 @@ CONFIG_SUNRPC=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1629,6 +1695,8 @@ CONFIG_SCHED_DEBUG=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set @@ -1652,17 +1720,18 @@ CONFIG_DEBUG_INFO=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_TRACEHOOK_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set -# CONFIG_BRANCH_PROFILE_NONE is not set -# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set -# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y @@ -1689,6 +1758,7 @@ CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y # CONFIG_BFIN_ISRAM_SELF_TEST is not set +# CONFIG_BFIN_PSEUDODBG_INSNS is not set # # Security options @@ -1698,9 +1768,12 @@ CONFIG_SECURITY=y # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set # CONFIG_SECURITY_PATH is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_SECURITY_ROOTPLUG is not set # CONFIG_SECURITY_TOMOYO is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index edbb44d26bbf..0de212e1e9bb 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -1,7 +1,8 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32.2 +# Linux kernel version: 2.6.34 # +CONFIG_SYMBOL_PREFIX="_" # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y @@ -37,6 +38,7 @@ CONFIG_HAVE_KERNEL_LZMA=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set # CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set @@ -49,6 +51,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -56,8 +59,6 @@ CONFIG_RCU_FANOUT=32 CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_GROUP_SCHED is not set -# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set @@ -66,6 +67,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -98,6 +100,7 @@ CONFIG_SLAB=y CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # # GCOV-based kernel profiling @@ -106,6 +109,7 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -122,14 +126,41 @@ CONFIG_BLOCK=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y # CONFIG_IOSCHED_DEADLINE is not set CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -232,6 +263,7 @@ CONFIG_BFIN527_EZKIT=y # CONFIG_BFIN527_EZKIT_V2 is not set # CONFIG_BFIN527_BLUETECHNIX_CM is not set # CONFIG_BFIN526_EZBRD is not set +# CONFIG_BFIN527_AD7160EVAL is not set # # BF527 Specific Configuration @@ -294,8 +326,16 @@ CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y + +# +# Clock event device +# # CONFIG_TICKSOURCE_GPTMR0 is not set CONFIG_TICKSOURCE_CORETMR=y + +# +# Clock souce +# # CONFIG_CYCLES_CLOCKSOURCE is not set # CONFIG_GPTMR0_CLOCKSOURCE is not set # CONFIG_NO_HZ is not set @@ -326,12 +366,16 @@ CONFIG_ARITHMETIC_OPS_L1=y CONFIG_ACCESS_OK_L1=y # CONFIG_MEMSET_L1 is not set # CONFIG_MEMCPY_L1 is not set +CONFIG_STRCMP_L1=y +CONFIG_STRNCMP_L1=y +CONFIG_STRCPY_L1=y +CONFIG_STRNCPY_L1=y # CONFIG_SYS_BFIN_SPINLOCK_L1 is not set # CONFIG_IP_CHECKSUM_L1 is not set CONFIG_CACHELINE_ALIGNED_L1=y # CONFIG_SYSCALL_TAB_L1 is not set # CONFIG_CPLB_SWITCH_TAB_L1 is not set -CONFIG_APP_STACK_L1=y +CONFIG_CACHE_FLUSH_L1=y # # Speed Optimizations @@ -431,7 +475,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -654,6 +697,10 @@ CONFIG_MTD_NAND_IDS=m CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y @@ -668,6 +715,9 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set # @@ -684,6 +734,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -745,6 +796,7 @@ CONFIG_PHYLIB=y # CONFIG_NATIONAL_PHY is not set # CONFIG_STE10XP is not set # CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_MICREL_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -753,7 +805,6 @@ CONFIG_BFIN_MAC=y CONFIG_BFIN_MAC_USE_L1=y CONFIG_BFIN_TX_DESC_NUM=10 CONFIG_BFIN_RX_DESC_NUM=20 -CONFIG_BFIN_MAC_RMII=y # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set @@ -788,6 +839,7 @@ CONFIG_BFIN_MAC_RMII=y # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +# CONFIG_USB_IPHETH is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -803,6 +855,7 @@ CONFIG_BFIN_MAC_RMII=y CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -821,6 +874,7 @@ CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y +# CONFIG_INPUT_AD714X is not set # CONFIG_INPUT_ATI_REMOTE is not set # CONFIG_INPUT_ATI_REMOTE2 is not set # CONFIG_INPUT_KEYSPAN_REMOTE is not set @@ -828,11 +882,10 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_CM109 is not set # CONFIG_INPUT_UINPUT is not set +# CONFIG_INPUT_PCF8574 is not set # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set # CONFIG_INPUT_BFIN_ROTARY is not set -# CONFIG_INPUT_AD714X is not set # CONFIG_INPUT_ADXL34X is not set -# CONFIG_INPUT_PCF8574 is not set # # Hardware I/O ports @@ -878,6 +931,7 @@ CONFIG_SERIAL_BFIN_UART1=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set @@ -906,6 +960,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -919,16 +974,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y @@ -941,6 +989,8 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_BFIN_SPORT is not set # CONFIG_SPI_BITBANG is not set # CONFIG_SPI_GPIO is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters @@ -960,10 +1010,12 @@ CONFIG_GPIO_SYSFS=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set @@ -1011,21 +1063,26 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_UCB1400_CORE is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set +# CONFIG_AB4500_CORE is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1066,6 +1123,7 @@ CONFIG_FB_BFIN_T350MCQB=y # CONFIG_FB_BROADSHEET is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_L4F00242T03 is not set # CONFIG_LCD_LMS283GF05 is not set CONFIG_LCD_LTV350QV=m # CONFIG_LCD_ILI9320 is not set @@ -1074,6 +1132,7 @@ CONFIG_LCD_LTV350QV=m # CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=m CONFIG_BACKLIGHT_GENERIC=m +# CONFIG_BACKLIGHT_ADP8860 is not set # CONFIG_BACKLIGHT_ADP8870 is not set # @@ -1122,13 +1181,9 @@ CONFIG_SND_DRIVERS=y # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set CONFIG_SND_SPI=y - -# -# ALSA Blackfin devices -# -# CONFIG_SND_BFIN_AD73322 is not set CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_UA101 is not set # CONFIG_SND_USB_CAIAQ is not set CONFIG_SND_SOC=m CONFIG_SND_SOC_AC97_BUS=y @@ -1137,6 +1192,10 @@ CONFIG_SND_BF5XX_SOC_SSM2602=m # CONFIG_SND_BF5XX_SOC_AD73311 is not set # CONFIG_SND_BF5XX_SOC_ADAU1371 is not set # CONFIG_SND_BF5XX_SOC_ADAU1761 is not set +# CONFIG_SND_BF5XX_SOC_ADAU1361 is not set +# CONFIG_SND_BF5XX_SOC_ADAU1381 is not set +# CONFIG_SND_BF5XX_SOC_ADAU1373 is not set +# CONFIG_SND_BF5XX_SOC_ADAV80X is not set # CONFIG_SND_BF5XX_TDM is not set CONFIG_SND_BF5XX_AC97=m CONFIG_SND_BF5XX_MMAP_SUPPORT=y @@ -1167,6 +1226,7 @@ CONFIG_USB_HID=y # # Special HID drivers # +# CONFIG_HID_3M_PCT is not set CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y @@ -1182,14 +1242,19 @@ CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGIG940_FF is not set CONFIG_HID_MICROSOFT=y +# CONFIG_HID_MOSART is not set CONFIG_HID_MONTEREY=y # CONFIG_HID_NTRIG is not set +# CONFIG_HID_ORTEK is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y +# CONFIG_HID_QUANTA is not set CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y +# CONFIG_HID_STANTUM is not set CONFIG_HID_SUNPLUS=y # CONFIG_HID_GREENASIA is not set # CONFIG_HID_SMARTJOYPLUS is not set @@ -1210,7 +1275,6 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set CONFIG_USB_OTG_BLACKLIST_HUB=y CONFIG_USB_MON=y @@ -1292,7 +1356,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1305,7 +1368,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # @@ -1346,6 +1408,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1374,7 +1437,9 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1407,7 +1472,6 @@ CONFIG_EXT2_FS=m # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set @@ -1472,6 +1536,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1496,6 +1561,7 @@ CONFIG_SUNRPC=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1574,6 +1640,8 @@ CONFIG_SCHED_DEBUG=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set @@ -1597,17 +1665,18 @@ CONFIG_DEBUG_INFO=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_TRACEHOOK_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set -# CONFIG_BRANCH_PROFILE_NONE is not set -# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set -# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y @@ -1634,6 +1703,7 @@ CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y # CONFIG_BFIN_ISRAM_SELF_TEST is not set +# CONFIG_BFIN_PSEUDODBG_INSNS is not set # # Security options @@ -1643,9 +1713,12 @@ CONFIG_SECURITY=y # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set # CONFIG_SECURITY_PATH is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_SECURITY_ROOTPLUG is not set # CONFIG_SECURITY_TOMOYO is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig index 0b13d5836a48..f096012c8d9a 100644 --- a/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -1,7 +1,8 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32.2 +# Linux kernel version: 2.6.34 # +CONFIG_SYMBOL_PREFIX="_" # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y @@ -37,6 +38,7 @@ CONFIG_HAVE_KERNEL_LZMA=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set # CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set @@ -49,6 +51,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -56,8 +59,6 @@ CONFIG_RCU_FANOUT=32 CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_GROUP_SCHED is not set -# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set @@ -66,6 +67,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -98,6 +100,7 @@ CONFIG_SLAB=y CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # # GCOV-based kernel profiling @@ -122,14 +125,41 @@ CONFIG_BLOCK=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y # CONFIG_IOSCHED_DEADLINE is not set CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -254,8 +284,16 @@ CONFIG_HZ=250 CONFIG_SCHED_HRTICK=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y + +# +# Clock event device +# # CONFIG_TICKSOURCE_GPTMR0 is not set CONFIG_TICKSOURCE_CORETMR=y + +# +# Clock souce +# CONFIG_CYCLES_CLOCKSOURCE=y # CONFIG_GPTMR0_CLOCKSOURCE is not set CONFIG_TICK_ONESHOT=y @@ -287,12 +325,16 @@ CONFIG_ARITHMETIC_OPS_L1=y CONFIG_ACCESS_OK_L1=y CONFIG_MEMSET_L1=y CONFIG_MEMCPY_L1=y +CONFIG_STRCMP_L1=y +CONFIG_STRNCMP_L1=y +CONFIG_STRCPY_L1=y +CONFIG_STRNCPY_L1=y CONFIG_SYS_BFIN_SPINLOCK_L1=y # CONFIG_IP_CHECKSUM_L1 is not set CONFIG_CACHELINE_ALIGNED_L1=y # CONFIG_SYSCALL_TAB_L1 is not set # CONFIG_CPLB_SWITCH_TAB_L1 is not set -CONFIG_APP_STACK_L1=y +CONFIG_CACHE_FLUSH_L1=y # # Speed Optimizations @@ -385,10 +427,10 @@ CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y # CONFIG_PM_RUNTIME is not set +CONFIG_PM_OPS=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_PM_BFIN_SLEEP_DEEPER=y # CONFIG_PM_BFIN_SLEEP is not set -# CONFIG_PM_WAKEUP_BY_GPIO is not set # # Possible Suspend Mem / Hibernate Wake-Up Sources @@ -404,7 +446,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -608,6 +649,10 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 @@ -617,7 +662,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set # @@ -631,6 +678,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -687,6 +735,7 @@ CONFIG_SMC91X=y CONFIG_INPUT=m # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -744,6 +793,7 @@ CONFIG_SERIAL_BFIN_UART0=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set @@ -765,6 +815,8 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_BFIN_SPORT is not set # CONFIG_SPI_BITBANG is not set # CONFIG_SPI_GPIO is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters @@ -784,6 +836,7 @@ CONFIG_GPIO_SYSFS=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: @@ -831,6 +884,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_MFD_MC13783 is not set # CONFIG_EZX_PCAP is not set +# CONFIG_AB4500_CORE is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -898,7 +952,9 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -929,7 +985,6 @@ CONFIG_RTC_DRV_BFIN=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set @@ -988,6 +1043,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1012,6 +1068,7 @@ CONFIG_SUNRPC=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1113,17 +1170,18 @@ CONFIG_DEBUG_INFO=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_TRACEHOOK_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set -# CONFIG_BRANCH_PROFILE_NONE is not set -# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set -# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y @@ -1150,6 +1208,7 @@ CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y # CONFIG_BFIN_ISRAM_SELF_TEST is not set +# CONFIG_BFIN_PSEUDODBG_INSNS is not set # # Security options @@ -1159,8 +1218,12 @@ CONFIG_SECURITY=y # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set # CONFIG_SECURITY_PATH is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_SECURITY_TOMOYO is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig index c3fe6e5b612f..f65b5e21139b 100644 --- a/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -1,7 +1,8 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32.2 +# Linux kernel version: 2.6.34 # +CONFIG_SYMBOL_PREFIX="_" # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y @@ -37,6 +38,7 @@ CONFIG_HAVE_KERNEL_LZMA=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set # CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set @@ -49,6 +51,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -56,8 +59,6 @@ CONFIG_RCU_FANOUT=32 CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_GROUP_SCHED is not set -# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set @@ -66,6 +67,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -98,6 +100,7 @@ CONFIG_SLAB=y CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # # GCOV-based kernel profiling @@ -106,6 +109,7 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -122,14 +126,41 @@ CONFIG_BLOCK=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y # CONFIG_IOSCHED_DEADLINE is not set CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -254,8 +285,16 @@ CONFIG_HZ=250 CONFIG_SCHED_HRTICK=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y + +# +# Clock event device +# # CONFIG_TICKSOURCE_GPTMR0 is not set CONFIG_TICKSOURCE_CORETMR=y + +# +# Clock souce +# CONFIG_CYCLES_CLOCKSOURCE=y # CONFIG_GPTMR0_CLOCKSOURCE is not set CONFIG_TICK_ONESHOT=y @@ -287,12 +326,16 @@ CONFIG_ARITHMETIC_OPS_L1=y CONFIG_ACCESS_OK_L1=y CONFIG_MEMSET_L1=y CONFIG_MEMCPY_L1=y +CONFIG_STRCMP_L1=y +CONFIG_STRNCMP_L1=y +CONFIG_STRCPY_L1=y +CONFIG_STRNCPY_L1=y CONFIG_SYS_BFIN_SPINLOCK_L1=y # CONFIG_IP_CHECKSUM_L1 is not set CONFIG_CACHELINE_ALIGNED_L1=y # CONFIG_SYSCALL_TAB_L1 is not set # CONFIG_CPLB_SWITCH_TAB_L1 is not set -CONFIG_APP_STACK_L1=y +CONFIG_CACHE_FLUSH_L1=y # # Speed Optimizations @@ -385,10 +428,10 @@ CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y # CONFIG_PM_RUNTIME is not set +CONFIG_PM_OPS=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_PM_BFIN_SLEEP_DEEPER=y # CONFIG_PM_BFIN_SLEEP is not set -# CONFIG_PM_WAKEUP_BY_GPIO is not set # # Possible Suspend Mem / Hibernate Wake-Up Sources @@ -404,7 +447,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -612,6 +654,10 @@ CONFIG_MTD_BFIN_ASYNC=m CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 @@ -625,6 +671,9 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set # @@ -641,6 +690,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -697,6 +747,7 @@ CONFIG_SMC91X=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -715,11 +766,11 @@ CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y +# CONFIG_INPUT_AD714X is not set # CONFIG_INPUT_UINPUT is not set +# CONFIG_INPUT_PCF8574 is not set # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set -# CONFIG_INPUT_AD714X is not set # CONFIG_INPUT_ADXL34X is not set -# CONFIG_INPUT_PCF8574 is not set # # Hardware I/O ports @@ -760,6 +811,7 @@ CONFIG_SERIAL_BFIN_UART0=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set @@ -781,9 +833,10 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # -# CONFIG_I2C_GPIO is not set +CONFIG_I2C_GPIO=m # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -796,16 +849,9 @@ CONFIG_I2C_HELPER_AUTO=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y @@ -818,6 +864,8 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_BFIN_SPORT is not set # CONFIG_SPI_BITBANG is not set # CONFIG_SPI_GPIO is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters @@ -837,10 +885,12 @@ CONFIG_GPIO_SYSFS=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set @@ -889,12 +939,11 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TPS65010 is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM831X is not set -# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_MC13783 is not set -# CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set +# CONFIG_AB4500_CORE is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -977,22 +1026,18 @@ CONFIG_SND_DRIVERS=y # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set CONFIG_SND_SPI=y - -# -# ALSA Blackfin devices -# -CONFIG_SND_BFIN_SPORT=0 -CONFIG_SND_BFIN_AD73322=m -CONFIG_SND_BFIN_AD73322_SPORT0_SE=10 -CONFIG_SND_BFIN_AD73322_SPORT1_SE=14 -CONFIG_SND_BFIN_AD73322_RESET=12 CONFIG_SND_SOC=m CONFIG_SND_SOC_AC97_BUS=y CONFIG_SND_BF5XX_I2S=m # CONFIG_SND_BF5XX_SOC_SSM2602 is not set CONFIG_SND_BF5XX_SOC_AD73311=m +CONFIG_SND_AD7XXXX_SELECT=0 # CONFIG_SND_BF5XX_SOC_ADAU1371 is not set # CONFIG_SND_BF5XX_SOC_ADAU1761 is not set +# CONFIG_SND_BF5XX_SOC_ADAU1361 is not set +# CONFIG_SND_BF5XX_SOC_ADAU1381 is not set +# CONFIG_SND_BF5XX_SOC_ADAU1373 is not set +# CONFIG_SND_BF5XX_SOC_ADAV80X is not set CONFIG_SND_BFIN_AD73311_SE=4 # CONFIG_SND_BF5XX_TDM is not set CONFIG_SND_BF5XX_AC97=m @@ -1051,6 +1096,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1079,7 +1125,9 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1111,7 +1159,6 @@ CONFIG_RTC_DRV_BFIN=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set @@ -1170,6 +1217,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1194,6 +1242,7 @@ CONFIG_SUNRPC=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1272,6 +1321,8 @@ CONFIG_SCHED_DEBUG=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set @@ -1295,17 +1346,18 @@ CONFIG_DEBUG_INFO=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_TRACEHOOK_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set -# CONFIG_BRANCH_PROFILE_NONE is not set -# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set -# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y @@ -1332,6 +1384,7 @@ CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y # CONFIG_BFIN_ISRAM_SELF_TEST is not set +# CONFIG_BFIN_PSEUDODBG_INSNS is not set # # Security options @@ -1341,8 +1394,12 @@ CONFIG_SECURITY=y # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set # CONFIG_SECURITY_PATH is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_SECURITY_TOMOYO is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index 7596cf7673f1..50cb9342f012 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -1,7 +1,8 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32.2 +# Linux kernel version: 2.6.34 # +CONFIG_SYMBOL_PREFIX="_" # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y @@ -37,6 +38,7 @@ CONFIG_HAVE_KERNEL_LZMA=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set # CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set @@ -49,6 +51,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -56,8 +59,6 @@ CONFIG_RCU_FANOUT=32 CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_GROUP_SCHED is not set -# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set @@ -66,6 +67,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -98,6 +100,7 @@ CONFIG_SLAB=y CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # # GCOV-based kernel profiling @@ -106,6 +109,7 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -122,14 +126,41 @@ CONFIG_BLOCK=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y # CONFIG_IOSCHED_DEADLINE is not set CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -230,7 +261,7 @@ CONFIG_BFIN537_STAMP=y # Priority # CONFIG_IRQ_DMA_ERROR=7 -CONFIG_IRQ_ERROR=7 +CONFIG_IRQ_ERROR=11 CONFIG_IRQ_CAN_RX=11 CONFIG_IRQ_CAN_TX=11 CONFIG_IRQ_PROG_INTA=12 @@ -262,8 +293,16 @@ CONFIG_HZ=250 CONFIG_SCHED_HRTICK=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y + +# +# Clock event device +# # CONFIG_TICKSOURCE_GPTMR0 is not set CONFIG_TICKSOURCE_CORETMR=y + +# +# Clock souce +# CONFIG_CYCLES_CLOCKSOURCE=y # CONFIG_GPTMR0_CLOCKSOURCE is not set CONFIG_TICK_ONESHOT=y @@ -295,12 +334,16 @@ CONFIG_ARITHMETIC_OPS_L1=y CONFIG_ACCESS_OK_L1=y CONFIG_MEMSET_L1=y CONFIG_MEMCPY_L1=y +CONFIG_STRCMP_L1=y +CONFIG_STRNCMP_L1=y +CONFIG_STRCPY_L1=y +CONFIG_STRNCPY_L1=y CONFIG_SYS_BFIN_SPINLOCK_L1=y # CONFIG_IP_CHECKSUM_L1 is not set CONFIG_CACHELINE_ALIGNED_L1=y # CONFIG_SYSCALL_TAB_L1 is not set # CONFIG_CPLB_SWITCH_TAB_L1 is not set -CONFIG_APP_STACK_L1=y +CONFIG_CACHE_FLUSH_L1=y # # Speed Optimizations @@ -393,10 +436,10 @@ CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y # CONFIG_PM_RUNTIME is not set +CONFIG_PM_OPS=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_PM_BFIN_SLEEP_DEEPER=y # CONFIG_PM_BFIN_SLEEP is not set -# CONFIG_PM_WAKEUP_BY_GPIO is not set # # Possible Suspend Mem / Hibernate Wake-Up Sources @@ -413,7 +456,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -482,13 +524,9 @@ CONFIG_CAN_BCM=m # CONFIG_CAN_VCAN is not set CONFIG_CAN_DEV=m # CONFIG_CAN_CALC_BITTIMING is not set +# CONFIG_CAN_MCP251X is not set CONFIG_CAN_BFIN=m # CONFIG_CAN_SJA1000 is not set - -# -# CAN USB interfaces -# -# CONFIG_CAN_EMS_USB is not set # CONFIG_CAN_DEBUG_DEVICES is not set CONFIG_IRDA=m @@ -638,6 +676,10 @@ CONFIG_MTD_PHYSMAP=m CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 @@ -651,6 +693,9 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set # @@ -667,6 +712,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -698,6 +744,7 @@ CONFIG_SMSC_PHY=y # CONFIG_NATIONAL_PHY is not set # CONFIG_STE10XP is not set # CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_MICREL_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -706,7 +753,6 @@ CONFIG_BFIN_MAC=y CONFIG_BFIN_MAC_USE_L1=y CONFIG_BFIN_TX_DESC_NUM=10 CONFIG_BFIN_RX_DESC_NUM=20 -# CONFIG_BFIN_MAC_RMII is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set @@ -747,6 +793,7 @@ CONFIG_BFIN_RX_DESC_NUM=20 CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -765,11 +812,11 @@ CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y +# CONFIG_INPUT_AD714X is not set # CONFIG_INPUT_UINPUT is not set +# CONFIG_INPUT_PCF8574 is not set # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set -# CONFIG_INPUT_AD714X is not set # CONFIG_INPUT_ADXL34X is not set -# CONFIG_INPUT_PCF8574 is not set # # Hardware I/O ports @@ -811,6 +858,7 @@ CONFIG_SERIAL_BFIN_UART0=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set @@ -837,6 +885,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -849,16 +898,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y @@ -871,6 +913,8 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_BFIN_SPORT is not set # CONFIG_SPI_BITBANG is not set # CONFIG_SPI_GPIO is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters @@ -890,10 +934,12 @@ CONFIG_GPIO_SYSFS=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set @@ -942,12 +988,11 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TPS65010 is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM831X is not set -# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_MC13783 is not set -# CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set +# CONFIG_AB4500_CORE is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -998,6 +1043,7 @@ CONFIG_ADV7393_1XMEM=y # CONFIG_FB_BROADSHEET is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_L4F00242T03 is not set # CONFIG_LCD_LMS283GF05 is not set # CONFIG_LCD_LTV350QV is not set # CONFIG_LCD_ILI9320 is not set @@ -1006,6 +1052,7 @@ CONFIG_LCD_CLASS_DEVICE=m # CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=m CONFIG_BACKLIGHT_GENERIC=m +# CONFIG_BACKLIGHT_ADP8860 is not set # CONFIG_BACKLIGHT_ADP8870 is not set # @@ -1042,22 +1089,18 @@ CONFIG_SND_DRIVERS=y # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set CONFIG_SND_SPI=y - -# -# ALSA Blackfin devices -# -CONFIG_SND_BFIN_SPORT=0 -CONFIG_SND_BFIN_AD73322=m -CONFIG_SND_BFIN_AD73322_SPORT0_SE=10 -CONFIG_SND_BFIN_AD73322_SPORT1_SE=14 -CONFIG_SND_BFIN_AD73322_RESET=12 CONFIG_SND_SOC=m CONFIG_SND_SOC_AC97_BUS=y CONFIG_SND_BF5XX_I2S=m # CONFIG_SND_BF5XX_SOC_SSM2602 is not set CONFIG_SND_BF5XX_SOC_AD73311=m +CONFIG_SND_AD7XXXX_SELECT=0 # CONFIG_SND_BF5XX_SOC_ADAU1371 is not set # CONFIG_SND_BF5XX_SOC_ADAU1761 is not set +# CONFIG_SND_BF5XX_SOC_ADAU1361 is not set +# CONFIG_SND_BF5XX_SOC_ADAU1381 is not set +# CONFIG_SND_BF5XX_SOC_ADAU1373 is not set +# CONFIG_SND_BF5XX_SOC_ADAV80X is not set CONFIG_SND_BFIN_AD73311_SE=4 # CONFIG_SND_BF5XX_TDM is not set CONFIG_SND_BF5XX_AC97=m @@ -1116,6 +1159,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1144,7 +1188,9 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1176,7 +1222,6 @@ CONFIG_RTC_DRV_BFIN=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set @@ -1235,6 +1280,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1259,6 +1305,7 @@ CONFIG_SUNRPC=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1337,6 +1384,8 @@ CONFIG_SCHED_DEBUG=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set @@ -1360,17 +1409,18 @@ CONFIG_DEBUG_INFO=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_TRACEHOOK_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set -# CONFIG_BRANCH_PROFILE_NONE is not set -# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set -# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y @@ -1397,6 +1447,7 @@ CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y # CONFIG_BFIN_ISRAM_SELF_TEST is not set +# CONFIG_BFIN_PSEUDODBG_INSNS is not set # # Security options @@ -1406,8 +1457,12 @@ CONFIG_SECURITY=y # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set # CONFIG_SECURITY_PATH is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_SECURITY_TOMOYO is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig index bc1871d89fd5..247cfae35af8 100644 --- a/arch/blackfin/configs/BF538-EZKIT_defconfig +++ b/arch/blackfin/configs/BF538-EZKIT_defconfig @@ -1,7 +1,8 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32.2 +# Linux kernel version: 2.6.34 # +CONFIG_SYMBOL_PREFIX="_" # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y @@ -37,6 +38,7 @@ CONFIG_HAVE_KERNEL_LZMA=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set # CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set @@ -49,6 +51,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -56,8 +59,6 @@ CONFIG_RCU_FANOUT=32 CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_GROUP_SCHED is not set -# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set @@ -66,6 +67,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -98,6 +100,7 @@ CONFIG_SLAB=y CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # # GCOV-based kernel profiling @@ -106,6 +109,7 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -122,14 +126,41 @@ CONFIG_BLOCK=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y # CONFIG_IOSCHED_DEADLINE is not set CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -272,8 +303,16 @@ CONFIG_HZ=250 CONFIG_SCHED_HRTICK=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y + +# +# Clock event device +# # CONFIG_TICKSOURCE_GPTMR0 is not set CONFIG_TICKSOURCE_CORETMR=y + +# +# Clock souce +# CONFIG_CYCLES_CLOCKSOURCE=y # CONFIG_GPTMR0_CLOCKSOURCE is not set CONFIG_TICK_ONESHOT=y @@ -305,12 +344,16 @@ CONFIG_ARITHMETIC_OPS_L1=y CONFIG_ACCESS_OK_L1=y CONFIG_MEMSET_L1=y CONFIG_MEMCPY_L1=y +CONFIG_STRCMP_L1=y +CONFIG_STRNCMP_L1=y +CONFIG_STRCPY_L1=y +CONFIG_STRNCPY_L1=y CONFIG_SYS_BFIN_SPINLOCK_L1=y # CONFIG_IP_CHECKSUM_L1 is not set CONFIG_CACHELINE_ALIGNED_L1=y # CONFIG_SYSCALL_TAB_L1 is not set # CONFIG_CPLB_SWITCH_TAB_L1 is not set -CONFIG_APP_STACK_L1=y +CONFIG_CACHE_FLUSH_L1=y # # Speed Optimizations @@ -410,7 +453,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -479,13 +521,9 @@ CONFIG_CAN_BCM=m # CONFIG_CAN_VCAN is not set CONFIG_CAN_DEV=m # CONFIG_CAN_CALC_BITTIMING is not set +# CONFIG_CAN_MCP251X is not set CONFIG_CAN_BFIN=m # CONFIG_CAN_SJA1000 is not set - -# -# CAN USB interfaces -# -# CONFIG_CAN_EMS_USB is not set # CONFIG_CAN_DEBUG_DEVICES is not set CONFIG_IRDA=m @@ -641,6 +679,10 @@ CONFIG_MTD_NAND_IDS=m CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 @@ -656,6 +698,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -687,6 +730,7 @@ CONFIG_SMSC_PHY=y # CONFIG_NATIONAL_PHY is not set # CONFIG_STE10XP is not set # CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_MICREL_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -731,6 +775,7 @@ CONFIG_SMC91X=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -750,9 +795,11 @@ CONFIG_INPUT_EVDEV=m CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_ADS7846 is not set # CONFIG_TOUCHSCREEN_AD7877 is not set +CONFIG_TOUCHSCREEN_AD7879=y # CONFIG_TOUCHSCREEN_AD7879_I2C is not set CONFIG_TOUCHSCREEN_AD7879_SPI=y -CONFIG_TOUCHSCREEN_AD7879=y +# CONFIG_TOUCHSCREEN_AD7160 is not set +# CONFIG_TOUCHSCREEN_DYNAPRO is not set # CONFIG_TOUCHSCREEN_EETI is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set @@ -768,11 +815,11 @@ CONFIG_TOUCHSCREEN_AD7879=y # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_TOUCHSCREEN_TSC2007 is not set CONFIG_INPUT_MISC=y +# CONFIG_INPUT_AD714X is not set # CONFIG_INPUT_UINPUT is not set +# CONFIG_INPUT_PCF8574 is not set # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set -# CONFIG_INPUT_AD714X is not set # CONFIG_INPUT_ADXL34X is not set -# CONFIG_INPUT_PCF8574 is not set # # Hardware I/O ports @@ -817,6 +864,7 @@ CONFIG_SERIAL_BFIN_UART2=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set @@ -843,6 +891,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -855,16 +904,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y @@ -877,6 +919,8 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_BFIN_SPORT is not set # CONFIG_SPI_BITBANG is not set # CONFIG_SPI_GPIO is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters @@ -896,10 +940,12 @@ CONFIG_GPIO_SYSFS=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set @@ -947,12 +993,11 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TPS65010 is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM831X is not set -# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_MC13783 is not set -# CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set +# CONFIG_AB4500_CORE is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1040,6 +1085,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1068,7 +1114,9 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1100,7 +1148,6 @@ CONFIG_RTC_DRV_BFIN=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set @@ -1159,6 +1206,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1183,6 +1231,7 @@ CONFIG_SUNRPC=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1261,6 +1310,8 @@ CONFIG_SCHED_DEBUG=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set @@ -1284,17 +1335,18 @@ CONFIG_DEBUG_INFO=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_TRACEHOOK_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set -# CONFIG_BRANCH_PROFILE_NONE is not set -# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set -# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y @@ -1321,6 +1373,7 @@ CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y # CONFIG_BFIN_ISRAM_SELF_TEST is not set +# CONFIG_BFIN_PSEUDODBG_INSNS is not set # # Security options @@ -1330,8 +1383,12 @@ CONFIG_SECURITY=y # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set # CONFIG_SECURITY_PATH is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_SECURITY_TOMOYO is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index ca309cfc6ac4..baca6660cf0b 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -1,7 +1,8 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32.2 +# Linux kernel version: 2.6.34 # +CONFIG_SYMBOL_PREFIX="_" # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y @@ -37,6 +38,7 @@ CONFIG_HAVE_KERNEL_LZMA=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set # CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set @@ -49,6 +51,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -56,8 +59,6 @@ CONFIG_RCU_FANOUT=32 CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_GROUP_SCHED is not set -# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set @@ -66,6 +67,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -98,6 +100,7 @@ CONFIG_SLAB=y CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # # GCOV-based kernel profiling @@ -107,6 +110,7 @@ CONFIG_SLOW_WORK=y # CONFIG_SLOW_WORK_DEBUG is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -123,14 +127,41 @@ CONFIG_BLOCK=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -330,8 +361,16 @@ CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y + +# +# Clock event device +# # CONFIG_TICKSOURCE_GPTMR0 is not set CONFIG_TICKSOURCE_CORETMR=y + +# +# Clock souce +# # CONFIG_CYCLES_CLOCKSOURCE is not set # CONFIG_GPTMR0_CLOCKSOURCE is not set # CONFIG_NO_HZ is not set @@ -362,12 +401,16 @@ CONFIG_ARITHMETIC_OPS_L1=y CONFIG_ACCESS_OK_L1=y # CONFIG_MEMSET_L1 is not set # CONFIG_MEMCPY_L1 is not set +CONFIG_STRCMP_L1=y +CONFIG_STRNCMP_L1=y +CONFIG_STRCPY_L1=y +CONFIG_STRNCPY_L1=y # CONFIG_SYS_BFIN_SPINLOCK_L1 is not set # CONFIG_IP_CHECKSUM_L1 is not set CONFIG_CACHELINE_ALIGNED_L1=y # CONFIG_SYSCALL_TAB_L1 is not set # CONFIG_CPLB_SWITCH_TAB_L1 is not set -CONFIG_APP_STACK_L1=y +CONFIG_CACHE_FLUSH_L1=y # # Speed Optimizations @@ -472,7 +515,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -540,6 +582,7 @@ CONFIG_CAN_BCM=m # CONFIG_CAN_VCAN is not set CONFIG_CAN_DEV=m # CONFIG_CAN_CALC_BITTIMING is not set +# CONFIG_CAN_MCP251X is not set CONFIG_CAN_BFIN=m # CONFIG_CAN_SJA1000 is not set @@ -595,9 +638,14 @@ CONFIG_SIR_BFIN_DMA=y # CONFIG_MCS_FIR is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set -CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set CONFIG_LIB80211=m +# CONFIG_LIB80211_DEBUG is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -700,8 +748,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y CONFIG_MTD_NAND_BF5XX=y -CONFIG_MTD_NAND_BF5XX_HWECC=y -# CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC is not set +# CONFIG_MTD_NAND_BF5XX_HWECC is not set # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set @@ -721,6 +768,10 @@ CONFIG_MTD_NAND_BF5XX_HWECC=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y @@ -735,6 +786,9 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set # @@ -745,12 +799,14 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_IWMC3200TOP is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -819,6 +875,7 @@ CONFIG_PHYLIB=y # CONFIG_NATIONAL_PHY is not set # CONFIG_STE10XP is not set # CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_MICREL_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -844,14 +901,6 @@ CONFIG_SMSC911X=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -CONFIG_WLAN_80211=y -CONFIG_LIBERTAS=m -# CONFIG_LIBERTAS_USB is not set -CONFIG_LIBERTAS_SDIO=m -CONFIG_POWEROF2_BLOCKSIZE_ONLY=y -# CONFIG_LIBERTAS_SPI is not set -# CONFIG_LIBERTAS_DEBUG is not set # CONFIG_USB_ZD1201 is not set # CONFIG_HOSTAP is not set @@ -867,6 +916,7 @@ CONFIG_POWEROF2_BLOCKSIZE_ONLY=y # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +# CONFIG_USB_IPHETH is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -882,6 +932,7 @@ CONFIG_POWEROF2_BLOCKSIZE_ONLY=y CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -914,9 +965,9 @@ CONFIG_KEYBOARD_BFIN=y CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_ADS7846 is not set CONFIG_TOUCHSCREEN_AD7877=m -# CONFIG_TOUCHSCREEN_AD7879_I2C is not set -# CONFIG_TOUCHSCREEN_AD7879_SPI is not set # CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_AD7160 is not set +# CONFIG_TOUCHSCREEN_DYNAPRO is not set # CONFIG_TOUCHSCREEN_EETI is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set @@ -934,6 +985,7 @@ CONFIG_TOUCHSCREEN_AD7877=m # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_TOUCHSCREEN_TSC2007 is not set CONFIG_INPUT_MISC=y +# CONFIG_INPUT_AD714X is not set # CONFIG_INPUT_ATI_REMOTE is not set # CONFIG_INPUT_ATI_REMOTE2 is not set # CONFIG_INPUT_KEYSPAN_REMOTE is not set @@ -941,11 +993,10 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_CM109 is not set # CONFIG_INPUT_UINPUT is not set +# CONFIG_INPUT_PCF8574 is not set # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set # CONFIG_INPUT_BFIN_ROTARY is not set -# CONFIG_INPUT_AD714X is not set # CONFIG_INPUT_ADXL34X is not set -# CONFIG_INPUT_PCF8574 is not set # # Hardware I/O ports @@ -993,6 +1044,7 @@ CONFIG_SERIAL_BFIN_UART1=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set @@ -1021,6 +1073,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -1034,16 +1087,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y @@ -1056,6 +1102,8 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_BFIN_SPORT is not set # CONFIG_SPI_BITBANG is not set # CONFIG_SPI_GPIO is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters @@ -1075,10 +1123,12 @@ CONFIG_GPIO_SYSFS=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set @@ -1126,21 +1176,26 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_UCB1400_CORE is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set +# CONFIG_AB4500_CORE is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1239,13 +1294,9 @@ CONFIG_SND_DRIVERS=y # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set CONFIG_SND_SPI=y - -# -# ALSA Blackfin devices -# -# CONFIG_SND_BFIN_AD73322 is not set CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_UA101 is not set # CONFIG_SND_USB_CAIAQ is not set CONFIG_SND_SOC=y CONFIG_SND_SOC_AC97_BUS=y @@ -1279,6 +1330,7 @@ CONFIG_USB_HID=y # # Special HID drivers # +# CONFIG_HID_3M_PCT is not set CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y @@ -1294,14 +1346,19 @@ CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGIG940_FF is not set CONFIG_HID_MICROSOFT=y +# CONFIG_HID_MOSART is not set CONFIG_HID_MONTEREY=y # CONFIG_HID_NTRIG is not set +# CONFIG_HID_ORTEK is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y +# CONFIG_HID_QUANTA is not set CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y +# CONFIG_HID_STANTUM is not set CONFIG_HID_SUNPLUS=y # CONFIG_HID_GREENASIA is not set # CONFIG_HID_SMARTJOYPLUS is not set @@ -1322,7 +1379,6 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set CONFIG_USB_OTG_BLACKLIST_HUB=y CONFIG_USB_MON=y @@ -1406,7 +1462,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1419,7 +1474,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # @@ -1444,11 +1498,9 @@ CONFIG_MMC_BLOCK_BOUNCE=y # MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set -# CONFIG_MMC_AT91 is not set -# CONFIG_MMC_ATMELMCI is not set # CONFIG_MMC_SPI is not set CONFIG_SDH_BFIN=y -# CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND is not set +CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND=y # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set @@ -1480,6 +1532,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1508,7 +1561,9 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1609,6 +1664,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1638,6 +1694,7 @@ CONFIG_SUNRPC=m CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y CONFIG_SMB_NLS_REMOTE="cp437" +# CONFIG_CEPH_FS is not set CONFIG_CIFS=y # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_WEAK_PW_HASH is not set @@ -1721,6 +1778,8 @@ CONFIG_SCHED_DEBUG=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set @@ -1744,12 +1803,16 @@ CONFIG_DEBUG_INFO=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_TRACEHOOK_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set @@ -1778,6 +1841,7 @@ CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y # CONFIG_BFIN_ISRAM_SELF_TEST is not set +# CONFIG_BFIN_PSEUDODBG_INSNS is not set # # Security options @@ -1785,7 +1849,11 @@ CONFIG_ACCESS_CHECK=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/blackfin/configs/BF561-ACVILON_defconfig b/arch/blackfin/configs/BF561-ACVILON_defconfig index 6a776ce75e9c..d5ceeab7a906 100644 --- a/arch/blackfin/configs/BF561-ACVILON_defconfig +++ b/arch/blackfin/configs/BF561-ACVILON_defconfig @@ -330,7 +330,6 @@ CONFIG_SYS_BFIN_SPINLOCK_L1=y CONFIG_CACHELINE_ALIGNED_L1=y # CONFIG_SYSCALL_TAB_L1 is not set # CONFIG_CPLB_SWITCH_TAB_L1 is not set -CONFIG_APP_STACK_L1=y # # Speed Optimizations diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig index 792ff0938835..1a5808a9aed3 100644 --- a/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -1,7 +1,8 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32.2 +# Linux kernel version: 2.6.34 # +CONFIG_SYMBOL_PREFIX="_" # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y @@ -37,6 +38,7 @@ CONFIG_HAVE_KERNEL_LZMA=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set # CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set @@ -49,6 +51,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -56,8 +59,6 @@ CONFIG_RCU_FANOUT=32 CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_GROUP_SCHED is not set -# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set @@ -66,6 +67,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -98,6 +100,7 @@ CONFIG_SLAB=y CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # # GCOV-based kernel profiling @@ -122,14 +125,41 @@ CONFIG_BLOCK=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -293,8 +323,16 @@ CONFIG_HZ=250 CONFIG_SCHED_HRTICK=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y + +# +# Clock event device +# # CONFIG_TICKSOURCE_GPTMR0 is not set CONFIG_TICKSOURCE_CORETMR=y + +# +# Clock souce +# CONFIG_CYCLES_CLOCKSOURCE=y # CONFIG_GPTMR0_CLOCKSOURCE is not set CONFIG_TICK_ONESHOT=y @@ -326,12 +364,16 @@ CONFIG_ARITHMETIC_OPS_L1=y CONFIG_ACCESS_OK_L1=y CONFIG_MEMSET_L1=y CONFIG_MEMCPY_L1=y +CONFIG_STRCMP_L1=y +CONFIG_STRNCMP_L1=y +CONFIG_STRCPY_L1=y +CONFIG_STRNCPY_L1=y CONFIG_SYS_BFIN_SPINLOCK_L1=y # CONFIG_IP_CHECKSUM_L1 is not set CONFIG_CACHELINE_ALIGNED_L1=y # CONFIG_SYSCALL_TAB_L1 is not set # CONFIG_CPLB_SWITCH_TAB_L1 is not set -CONFIG_APP_STACK_L1=y +CONFIG_CACHE_FLUSH_L1=y # # Speed Optimizations @@ -439,7 +481,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -643,6 +684,10 @@ CONFIG_MTD_PHYSMAP=m CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 @@ -652,7 +697,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set # @@ -666,6 +713,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -722,6 +770,7 @@ CONFIG_SMC91X=y CONFIG_INPUT=m # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -779,6 +828,7 @@ CONFIG_SERIAL_BFIN_UART0=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set @@ -800,6 +850,8 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_BFIN_SPORT is not set # CONFIG_SPI_BITBANG is not set # CONFIG_SPI_GPIO is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters @@ -819,6 +871,7 @@ CONFIG_GPIO_SYSFS=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: @@ -866,6 +919,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_MFD_MC13783 is not set # CONFIG_EZX_PCAP is not set +# CONFIG_AB4500_CORE is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -978,6 +1032,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1002,6 +1057,7 @@ CONFIG_SUNRPC=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1103,12 +1159,16 @@ CONFIG_DEBUG_INFO=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_TRACEHOOK_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set @@ -1137,6 +1197,7 @@ CONFIG_EARLY_PRINTK=y CONFIG_CPLB_INFO=y CONFIG_ACCESS_CHECK=y # CONFIG_BFIN_ISRAM_SELF_TEST is not set +# CONFIG_BFIN_PSEUDODBG_INSNS is not set # # Security options @@ -1144,7 +1205,11 @@ CONFIG_ACCESS_CHECK=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig index 4432150d89e3..1189095aaff5 100644 --- a/arch/blackfin/configs/CM-BF527_defconfig +++ b/arch/blackfin/configs/CM-BF527_defconfig @@ -319,7 +319,6 @@ CONFIG_ACCESS_OK_L1=y CONFIG_CACHELINE_ALIGNED_L1=y # CONFIG_SYSCALL_TAB_L1 is not set # CONFIG_CPLB_SWITCH_TAB_L1 is not set -CONFIG_APP_STACK_L1=y # # Speed Optimizations diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig index df56639ab2f2..feffba8f3237 100644 --- a/arch/blackfin/configs/CM-BF533_defconfig +++ b/arch/blackfin/configs/CM-BF533_defconfig @@ -279,7 +279,6 @@ CONFIG_IP_CHECKSUM_L1=y CONFIG_CACHELINE_ALIGNED_L1=y CONFIG_SYSCALL_TAB_L1=y CONFIG_CPLB_SWITCH_TAB_L1=y -CONFIG_APP_STACK_L1=y # # Speed Optimizations diff --git a/arch/blackfin/configs/CM-BF537E_defconfig b/arch/blackfin/configs/CM-BF537E_defconfig index 22e565c51d66..c3c3a77819f8 100644 --- a/arch/blackfin/configs/CM-BF537E_defconfig +++ b/arch/blackfin/configs/CM-BF537E_defconfig @@ -288,7 +288,6 @@ CONFIG_IP_CHECKSUM_L1=y CONFIG_CACHELINE_ALIGNED_L1=y CONFIG_SYSCALL_TAB_L1=y CONFIG_CPLB_SWITCH_TAB_L1=y -CONFIG_APP_STACK_L1=y # # Speed Optimizations diff --git a/arch/blackfin/configs/CM-BF537U_defconfig b/arch/blackfin/configs/CM-BF537U_defconfig index efcc90d2f345..f891d8400dd0 100644 --- a/arch/blackfin/configs/CM-BF537U_defconfig +++ b/arch/blackfin/configs/CM-BF537U_defconfig @@ -288,7 +288,6 @@ CONFIG_IP_CHECKSUM_L1=y CONFIG_CACHELINE_ALIGNED_L1=y CONFIG_SYSCALL_TAB_L1=y CONFIG_CPLB_SWITCH_TAB_L1=y -CONFIG_APP_STACK_L1=y # # Speed Optimizations diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig index 7f579cf51127..85ce6a90fe81 100644 --- a/arch/blackfin/configs/CM-BF548_defconfig +++ b/arch/blackfin/configs/CM-BF548_defconfig @@ -346,7 +346,6 @@ CONFIG_ACCESS_OK_L1=y CONFIG_CACHELINE_ALIGNED_L1=y # CONFIG_SYSCALL_TAB_L1 is not set # CONFIG_CPLB_SWITCH_TAB_L1 is not set -CONFIG_APP_STACK_L1=y # # Speed Optimizations diff --git a/arch/blackfin/configs/CM-BF561_defconfig b/arch/blackfin/configs/CM-BF561_defconfig index a6df01dac98a..dfb530190af2 100644 --- a/arch/blackfin/configs/CM-BF561_defconfig +++ b/arch/blackfin/configs/CM-BF561_defconfig @@ -318,7 +318,6 @@ CONFIG_IP_CHECKSUM_L1=y CONFIG_CACHELINE_ALIGNED_L1=y CONFIG_SYSCALL_TAB_L1=y CONFIG_CPLB_SWITCH_TAB_L1=y -CONFIG_APP_STACK_L1=y # # Speed Optimizations diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig index ad58fede1f41..1c2072dddfa1 100644 --- a/arch/blackfin/configs/PNAV-10_defconfig +++ b/arch/blackfin/configs/PNAV-10_defconfig @@ -1,7 +1,8 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32.2 +# Linux kernel version: 2.6.34 # +CONFIG_SYMBOL_PREFIX="_" # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y @@ -37,6 +38,7 @@ CONFIG_HAVE_KERNEL_LZMA=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set # CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set @@ -49,13 +51,13 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -92,6 +94,7 @@ CONFIG_SLAB=y CONFIG_MMAP_ALLOW_UNINITIALIZED=y # CONFIG_PROFILING is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # # GCOV-based kernel profiling @@ -99,6 +102,7 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -115,14 +119,41 @@ CONFIG_BLOCK=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y # CONFIG_IOSCHED_DEADLINE is not set CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -255,8 +286,16 @@ CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y + +# +# Clock event device +# # CONFIG_TICKSOURCE_GPTMR0 is not set CONFIG_TICKSOURCE_CORETMR=y + +# +# Clock souce +# # CONFIG_CYCLES_CLOCKSOURCE is not set # CONFIG_GPTMR0_CLOCKSOURCE is not set # CONFIG_NO_HZ is not set @@ -287,12 +326,16 @@ CONFIG_ARITHMETIC_OPS_L1=y CONFIG_ACCESS_OK_L1=y CONFIG_MEMSET_L1=y CONFIG_MEMCPY_L1=y +CONFIG_STRCMP_L1=y +CONFIG_STRNCMP_L1=y +CONFIG_STRCPY_L1=y +CONFIG_STRNCPY_L1=y CONFIG_SYS_BFIN_SPINLOCK_L1=y CONFIG_IP_CHECKSUM_L1=y CONFIG_CACHELINE_ALIGNED_L1=y CONFIG_SYSCALL_TAB_L1=y CONFIG_CPLB_SWITCH_TAB_L1=y -CONFIG_APP_STACK_L1=y +CONFIG_CACHE_FLUSH_L1=y # # Speed Optimizations @@ -392,7 +435,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -562,6 +604,10 @@ CONFIG_MTD_NAND_IDS=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 @@ -575,6 +621,9 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set # @@ -591,6 +640,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -622,6 +672,7 @@ CONFIG_PHYLIB=y # CONFIG_NATIONAL_PHY is not set # CONFIG_STE10XP is not set # CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_MICREL_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -630,7 +681,6 @@ CONFIG_BFIN_MAC=y # CONFIG_BFIN_MAC_USE_L1 is not set CONFIG_BFIN_TX_DESC_NUM=100 CONFIG_BFIN_RX_DESC_NUM=100 -CONFIG_BFIN_MAC_RMII=y # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set @@ -671,6 +721,7 @@ CONFIG_BFIN_MAC_RMII=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -690,9 +741,9 @@ CONFIG_INPUT_EVDEV=y CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_ADS7846 is not set CONFIG_TOUCHSCREEN_AD7877=y -# CONFIG_TOUCHSCREEN_AD7879_I2C is not set -# CONFIG_TOUCHSCREEN_AD7879_SPI is not set # CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_AD7160 is not set +# CONFIG_TOUCHSCREEN_DYNAPRO is not set # CONFIG_TOUCHSCREEN_EETI is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set @@ -709,6 +760,7 @@ CONFIG_TOUCHSCREEN_AD7877=y # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_TOUCHSCREEN_TSC2007 is not set CONFIG_INPUT_MISC=y +# CONFIG_INPUT_AD714X is not set # CONFIG_INPUT_ATI_REMOTE is not set # CONFIG_INPUT_ATI_REMOTE2 is not set # CONFIG_INPUT_KEYSPAN_REMOTE is not set @@ -716,9 +768,8 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_CM109 is not set CONFIG_INPUT_UINPUT=y -# CONFIG_INPUT_AD714X is not set -# CONFIG_INPUT_ADXL34X is not set # CONFIG_INPUT_PCF8574 is not set +# CONFIG_INPUT_ADXL34X is not set # # Hardware I/O ports @@ -761,6 +812,7 @@ CONFIG_SERIAL_BFIN_UART1=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set @@ -788,6 +840,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -800,16 +853,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y CONFIG_SPI_MASTER=y @@ -821,6 +867,8 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_BFIN_SPORT is not set # CONFIG_SPI_BITBANG is not set # CONFIG_SPI_GPIO is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters @@ -852,10 +900,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -867,6 +916,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -892,6 +942,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set @@ -905,6 +956,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_LIS3_SPI is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -918,19 +970,23 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set +# CONFIG_AB4500_CORE is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -973,6 +1029,7 @@ CONFIG_FB_BF537_LQ035=y # CONFIG_FB_BROADSHEET is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_L4F00242T03 is not set # CONFIG_LCD_LMS283GF05 is not set # CONFIG_LCD_LTV350QV is not set # CONFIG_LCD_ILI9320 is not set @@ -981,6 +1038,7 @@ CONFIG_LCD_CLASS_DEVICE=y # CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_GENERIC=y +# CONFIG_BACKLIGHT_ADP8860 is not set # CONFIG_BACKLIGHT_ADP8870 is not set # @@ -1011,11 +1069,6 @@ CONFIG_SND_DRIVERS=y # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set CONFIG_SND_SPI=y - -# -# ALSA Blackfin devices -# -# CONFIG_SND_BFIN_AD73322 is not set # CONFIG_SND_SOC is not set CONFIG_SOUND_PRIME=y CONFIG_HID_SUPPORT=y @@ -1073,6 +1126,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set @@ -1101,7 +1155,9 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1137,7 +1193,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set @@ -1186,6 +1241,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1210,6 +1266,7 @@ CONFIG_SUNRPC=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1276,11 +1333,14 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_SECTION_MISMATCH=y # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_TRACEHOOK_SELF_TEST is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set @@ -1300,6 +1360,7 @@ CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 # CONFIG_CPLB_INFO is not set # CONFIG_ACCESS_CHECK is not set # CONFIG_BFIN_ISRAM_SELF_TEST is not set +# CONFIG_BFIN_PSEUDODBG_INSNS is not set # # Security options @@ -1309,8 +1370,12 @@ CONFIG_SECURITY=y # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set # CONFIG_SECURITY_PATH is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_SECURITY_TOMOYO is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # diff --git a/arch/blackfin/configs/TCM-BF518_defconfig b/arch/blackfin/configs/TCM-BF518_defconfig index 4d31e2a4ed46..cdf4c00f2c49 100644 --- a/arch/blackfin/configs/TCM-BF518_defconfig +++ b/arch/blackfin/configs/TCM-BF518_defconfig @@ -333,7 +333,6 @@ CONFIG_ACCESS_OK_L1=y CONFIG_CACHELINE_ALIGNED_L1=y # CONFIG_SYSCALL_TAB_L1 is not set # CONFIG_CPLB_SWITCH_TAB_L1 is not set -CONFIG_APP_STACK_L1=y # # Speed Optimizations diff --git a/arch/blackfin/configs/TCM-BF537_defconfig b/arch/blackfin/configs/TCM-BF537_defconfig index 60adfad54db9..00f221f0c724 100644 --- a/arch/blackfin/configs/TCM-BF537_defconfig +++ b/arch/blackfin/configs/TCM-BF537_defconfig @@ -287,7 +287,6 @@ CONFIG_IP_CHECKSUM_L1=y CONFIG_CACHELINE_ALIGNED_L1=y CONFIG_SYSCALL_TAB_L1=y CONFIG_CPLB_SWITCH_TAB_L1=y -CONFIG_APP_STACK_L1=y # # Speed Optimizations diff --git a/arch/blackfin/include/asm/bfin_rotary.h b/arch/blackfin/include/asm/bfin_rotary.h index abdb2af52902..0b6910bdc57f 100644 --- a/arch/blackfin/include/asm/bfin_rotary.h +++ b/arch/blackfin/include/asm/bfin_rotary.h @@ -2,7 +2,7 @@ * board initialization should put one of these structures into platform_data * and place the bfin-rotary onto platform_bus named "bfin-rotary". * - * Copyright 2008 Analog Devices Inc. + * Copyright 2008-2010 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ @@ -40,4 +40,76 @@ struct bfin_rotary_platform_data { unsigned short debounce; /* 0..17 */ unsigned short mode; }; + +/* CNT_CONFIG bitmasks */ +#define CNTE (1 << 0) /* Counter Enable */ +#define DEBE (1 << 1) /* Debounce Enable */ +#define CDGINV (1 << 4) /* CDG Pin Polarity Invert */ +#define CUDINV (1 << 5) /* CUD Pin Polarity Invert */ +#define CZMINV (1 << 6) /* CZM Pin Polarity Invert */ +#define CNTMODE_SHIFT 8 +#define CNTMODE (0x7 << CNTMODE_SHIFT) /* Counter Operating Mode */ +#define ZMZC (1 << 1) /* CZM Zeroes Counter Enable */ +#define BNDMODE_SHIFT 12 +#define BNDMODE (0x3 << BNDMODE_SHIFT) /* Boundary register Mode */ +#define INPDIS (1 << 15) /* CUG and CDG Input Disable */ + +#define CNTMODE_QUADENC (0 << CNTMODE_SHIFT) /* quadrature encoder mode */ +#define CNTMODE_BINENC (1 << CNTMODE_SHIFT) /* binary encoder mode */ +#define CNTMODE_UDCNT (2 << CNTMODE_SHIFT) /* up/down counter mode */ +#define CNTMODE_DIRCNT (4 << CNTMODE_SHIFT) /* direction counter mode */ +#define CNTMODE_DIRTMR (5 << CNTMODE_SHIFT) /* direction timer mode */ + +#define BNDMODE_COMP (0 << BNDMODE_SHIFT) /* boundary compare mode */ +#define BNDMODE_ZERO (1 << BNDMODE_SHIFT) /* boundary compare and zero mode */ +#define BNDMODE_CAPT (2 << BNDMODE_SHIFT) /* boundary capture mode */ +#define BNDMODE_AEXT (3 << BNDMODE_SHIFT) /* boundary auto-extend mode */ + +/* CNT_IMASK bitmasks */ +#define ICIE (1 << 0) /* Illegal Gray/Binary Code Interrupt Enable */ +#define UCIE (1 << 1) /* Up count Interrupt Enable */ +#define DCIE (1 << 2) /* Down count Interrupt Enable */ +#define MINCIE (1 << 3) /* Min Count Interrupt Enable */ +#define MAXCIE (1 << 4) /* Max Count Interrupt Enable */ +#define COV31IE (1 << 5) /* Bit 31 Overflow Interrupt Enable */ +#define COV15IE (1 << 6) /* Bit 15 Overflow Interrupt Enable */ +#define CZEROIE (1 << 7) /* Count to Zero Interrupt Enable */ +#define CZMIE (1 << 8) /* CZM Pin Interrupt Enable */ +#define CZMEIE (1 << 9) /* CZM Error Interrupt Enable */ +#define CZMZIE (1 << 10) /* CZM Zeroes Counter Interrupt Enable */ + +/* CNT_STATUS bitmasks */ +#define ICII (1 << 0) /* Illegal Gray/Binary Code Interrupt Identifier */ +#define UCII (1 << 1) /* Up count Interrupt Identifier */ +#define DCII (1 << 2) /* Down count Interrupt Identifier */ +#define MINCII (1 << 3) /* Min Count Interrupt Identifier */ +#define MAXCII (1 << 4) /* Max Count Interrupt Identifier */ +#define COV31II (1 << 5) /* Bit 31 Overflow Interrupt Identifier */ +#define COV15II (1 << 6) /* Bit 15 Overflow Interrupt Identifier */ +#define CZEROII (1 << 7) /* Count to Zero Interrupt Identifier */ +#define CZMII (1 << 8) /* CZM Pin Interrupt Identifier */ +#define CZMEII (1 << 9) /* CZM Error Interrupt Identifier */ +#define CZMZII (1 << 10) /* CZM Zeroes Counter Interrupt Identifier */ + +/* CNT_COMMAND bitmasks */ +#define W1LCNT 0xf /* Load Counter Register */ +#define W1LMIN 0xf0 /* Load Min Register */ +#define W1LMAX 0xf00 /* Load Max Register */ +#define W1ZMONCE (1 << 12) /* Enable CZM Clear Counter Once */ + +#define W1LCNT_ZERO (1 << 0) /* write 1 to load CNT_COUNTER with zero */ +#define W1LCNT_MIN (1 << 2) /* write 1 to load CNT_COUNTER from CNT_MIN */ +#define W1LCNT_MAX (1 << 3) /* write 1 to load CNT_COUNTER from CNT_MAX */ + +#define W1LMIN_ZERO (1 << 4) /* write 1 to load CNT_MIN with zero */ +#define W1LMIN_CNT (1 << 5) /* write 1 to load CNT_MIN from CNT_COUNTER */ +#define W1LMIN_MAX (1 << 7) /* write 1 to load CNT_MIN from CNT_MAX */ + +#define W1LMAX_ZERO (1 << 8) /* write 1 to load CNT_MAX with zero */ +#define W1LMAX_CNT (1 << 9) /* write 1 to load CNT_MAX from CNT_COUNTER */ +#define W1LMAX_MIN (1 << 10) /* write 1 to load CNT_MAX from CNT_MIN */ + +/* CNT_DEBOUNCE bitmasks */ +#define DPRESCALE 0xf /* Load Counter Register */ + #endif diff --git a/arch/blackfin/include/asm/bfin_sdh.h b/arch/blackfin/include/asm/bfin_sdh.h index d61d5497c590..6a4cfe2d3367 100644 --- a/arch/blackfin/include/asm/bfin_sdh.h +++ b/arch/blackfin/include/asm/bfin_sdh.h @@ -1,7 +1,7 @@ /* - * bfin_sdh.h - Blackfin SDH definitions + * Blackfin Secure Digital Host (SDH) definitions * - * Copyright 2008 Analog Devices Inc. + * Copyright 2008-2010 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ @@ -9,6 +9,7 @@ #ifndef __BFIN_SDH_H__ #define __BFIN_SDH_H__ +/* Platform resources */ struct bfin_sd_host { int dma_chan; int irq_int0; @@ -16,4 +17,118 @@ struct bfin_sd_host { u16 pin_req[7]; }; +/* SDH_COMMAND bitmasks */ +#define CMD_IDX 0x3f /* Command Index */ +#define CMD_RSP (1 << 6) /* Response */ +#define CMD_L_RSP (1 << 7) /* Long Response */ +#define CMD_INT_E (1 << 8) /* Command Interrupt */ +#define CMD_PEND_E (1 << 9) /* Command Pending */ +#define CMD_E (1 << 10) /* Command Enable */ + +/* SDH_PWR_CTL bitmasks */ +#define PWR_ON 0x3 /* Power On */ +#define SD_CMD_OD (1 << 6) /* Open Drain Output */ +#define ROD_CTL (1 << 7) /* Rod Control */ + +/* SDH_CLK_CTL bitmasks */ +#define CLKDIV 0xff /* MC_CLK Divisor */ +#define CLK_E (1 << 8) /* MC_CLK Bus Clock Enable */ +#define PWR_SV_E (1 << 9) /* Power Save Enable */ +#define CLKDIV_BYPASS (1 << 10) /* Bypass Divisor */ +#define WIDE_BUS (1 << 11) /* Wide Bus Mode Enable */ + +/* SDH_RESP_CMD bitmasks */ +#define RESP_CMD 0x3f /* Response Command */ + +/* SDH_DATA_CTL bitmasks */ +#define DTX_E (1 << 0) /* Data Transfer Enable */ +#define DTX_DIR (1 << 1) /* Data Transfer Direction */ +#define DTX_MODE (1 << 2) /* Data Transfer Mode */ +#define DTX_DMA_E (1 << 3) /* Data Transfer DMA Enable */ +#define DTX_BLK_LGTH (0xf << 4) /* Data Transfer Block Length */ + +/* SDH_STATUS bitmasks */ +#define CMD_CRC_FAIL (1 << 0) /* CMD CRC Fail */ +#define DAT_CRC_FAIL (1 << 1) /* Data CRC Fail */ +#define CMD_TIME_OUT (1 << 2) /* CMD Time Out */ +#define DAT_TIME_OUT (1 << 3) /* Data Time Out */ +#define TX_UNDERRUN (1 << 4) /* Transmit Underrun */ +#define RX_OVERRUN (1 << 5) /* Receive Overrun */ +#define CMD_RESP_END (1 << 6) /* CMD Response End */ +#define CMD_SENT (1 << 7) /* CMD Sent */ +#define DAT_END (1 << 8) /* Data End */ +#define START_BIT_ERR (1 << 9) /* Start Bit Error */ +#define DAT_BLK_END (1 << 10) /* Data Block End */ +#define CMD_ACT (1 << 11) /* CMD Active */ +#define TX_ACT (1 << 12) /* Transmit Active */ +#define RX_ACT (1 << 13) /* Receive Active */ +#define TX_FIFO_STAT (1 << 14) /* Transmit FIFO Status */ +#define RX_FIFO_STAT (1 << 15) /* Receive FIFO Status */ +#define TX_FIFO_FULL (1 << 16) /* Transmit FIFO Full */ +#define RX_FIFO_FULL (1 << 17) /* Receive FIFO Full */ +#define TX_FIFO_ZERO (1 << 18) /* Transmit FIFO Empty */ +#define RX_DAT_ZERO (1 << 19) /* Receive FIFO Empty */ +#define TX_DAT_RDY (1 << 20) /* Transmit Data Available */ +#define RX_FIFO_RDY (1 << 21) /* Receive Data Available */ + +/* SDH_STATUS_CLR bitmasks */ +#define CMD_CRC_FAIL_STAT (1 << 0) /* CMD CRC Fail Status */ +#define DAT_CRC_FAIL_STAT (1 << 1) /* Data CRC Fail Status */ +#define CMD_TIMEOUT_STAT (1 << 2) /* CMD Time Out Status */ +#define DAT_TIMEOUT_STAT (1 << 3) /* Data Time Out status */ +#define TX_UNDERRUN_STAT (1 << 4) /* Transmit Underrun Status */ +#define RX_OVERRUN_STAT (1 << 5) /* Receive Overrun Status */ +#define CMD_RESP_END_STAT (1 << 6) /* CMD Response End Status */ +#define CMD_SENT_STAT (1 << 7) /* CMD Sent Status */ +#define DAT_END_STAT (1 << 8) /* Data End Status */ +#define START_BIT_ERR_STAT (1 << 9) /* Start Bit Error Status */ +#define DAT_BLK_END_STAT (1 << 10) /* Data Block End Status */ + +/* SDH_MASK0 bitmasks */ +#define CMD_CRC_FAIL_MASK (1 << 0) /* CMD CRC Fail Mask */ +#define DAT_CRC_FAIL_MASK (1 << 1) /* Data CRC Fail Mask */ +#define CMD_TIMEOUT_MASK (1 << 2) /* CMD Time Out Mask */ +#define DAT_TIMEOUT_MASK (1 << 3) /* Data Time Out Mask */ +#define TX_UNDERRUN_MASK (1 << 4) /* Transmit Underrun Mask */ +#define RX_OVERRUN_MASK (1 << 5) /* Receive Overrun Mask */ +#define CMD_RESP_END_MASK (1 << 6) /* CMD Response End Mask */ +#define CMD_SENT_MASK (1 << 7) /* CMD Sent Mask */ +#define DAT_END_MASK (1 << 8) /* Data End Mask */ +#define START_BIT_ERR_MASK (1 << 9) /* Start Bit Error Mask */ +#define DAT_BLK_END_MASK (1 << 10) /* Data Block End Mask */ +#define CMD_ACT_MASK (1 << 11) /* CMD Active Mask */ +#define TX_ACT_MASK (1 << 12) /* Transmit Active Mask */ +#define RX_ACT_MASK (1 << 13) /* Receive Active Mask */ +#define TX_FIFO_STAT_MASK (1 << 14) /* Transmit FIFO Status Mask */ +#define RX_FIFO_STAT_MASK (1 << 15) /* Receive FIFO Status Mask */ +#define TX_FIFO_FULL_MASK (1 << 16) /* Transmit FIFO Full Mask */ +#define RX_FIFO_FULL_MASK (1 << 17) /* Receive FIFO Full Mask */ +#define TX_FIFO_ZERO_MASK (1 << 18) /* Transmit FIFO Empty Mask */ +#define RX_DAT_ZERO_MASK (1 << 19) /* Receive FIFO Empty Mask */ +#define TX_DAT_RDY_MASK (1 << 20) /* Transmit Data Available Mask */ +#define RX_FIFO_RDY_MASK (1 << 21) /* Receive Data Available Mask */ + +/* SDH_FIFO_CNT bitmasks */ +#define FIFO_COUNT 0x7fff /* FIFO Count */ + +/* SDH_E_STATUS bitmasks */ +#define SDIO_INT_DET (1 << 1) /* SDIO Int Detected */ +#define SD_CARD_DET (1 << 4) /* SD Card Detect */ + +/* SDH_E_MASK bitmasks */ +#define SDIO_MSK (1 << 1) /* Mask SDIO Int Detected */ +#define SCD_MSK (1 << 6) /* Mask Card Detect */ + +/* SDH_CFG bitmasks */ +#define CLKS_EN (1 << 0) /* Clocks Enable */ +#define SD4E (1 << 2) /* SDIO 4-Bit Enable */ +#define MWE (1 << 3) /* Moving Window Enable */ +#define SD_RST (1 << 4) /* SDMMC Reset */ +#define PUP_SDDAT (1 << 5) /* Pull-up SD_DAT */ +#define PUP_SDDAT3 (1 << 6) /* Pull-up SD_DAT3 */ +#define PD_SDDAT3 (1 << 7) /* Pull-down SD_DAT3 */ + +/* SDH_RD_WAIT_EN bitmasks */ +#define RWR (1 << 0) /* Read Wait Request */ + #endif diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h index 605ba8e9b2e4..d5872cd967ab 100644 --- a/arch/blackfin/include/asm/bitops.h +++ b/arch/blackfin/include/asm/bitops.h @@ -119,7 +119,7 @@ static inline unsigned int hweight32(unsigned int w) { unsigned int res; - __asm__ ("%0.l = ONES %0;" + __asm__ ("%0.l = ONES %1;" "%0 = %0.l (Z);" : "=d" (res) : "d" (w)); return res; diff --git a/arch/blackfin/include/asm/cdef_LPBlackfin.h b/arch/blackfin/include/asm/cdef_LPBlackfin.h index 8778e0f03730..6c39d94b44d0 100644 --- a/arch/blackfin/include/asm/cdef_LPBlackfin.h +++ b/arch/blackfin/include/asm/cdef_LPBlackfin.h @@ -216,12 +216,16 @@ #define bfin_write_EVT14(val) bfin_write32(EVT14,val) #define bfin_read_EVT15() bfin_read32(EVT15) #define bfin_write_EVT15(val) bfin_write32(EVT15,val) +#define bfin_read_EVT_OVERRIDE() bfin_read32(EVT_OVERRIDE) +#define bfin_write_EVT_OVERRIDE(val) bfin_write32(EVT_OVERRIDE,val) #define bfin_read_IMASK() bfin_read32(IMASK) #define bfin_write_IMASK(val) bfin_write32(IMASK,val) #define bfin_read_IPEND() bfin_read32(IPEND) #define bfin_write_IPEND(val) bfin_write32(IPEND,val) #define bfin_read_ILAT() bfin_read32(ILAT) #define bfin_write_ILAT(val) bfin_write32(ILAT,val) +#define bfin_read_IPRIO() bfin_read32(IPRIO) +#define bfin_write_IPRIO(val) bfin_write32(IPRIO,val) /*Core Timer Registers*/ #define bfin_read_TCNTL() bfin_read32(TCNTL) @@ -299,8 +303,4 @@ #define bfin_read_PFCNTR1() bfin_read32(PFCNTR1) #define bfin_write_PFCNTR1(val) bfin_write32(PFCNTR1,val) -/* -#define IPRIO 0xFFE02110 -*/ - #endif /* _CDEF_LPBLACKFIN_H */ diff --git a/arch/blackfin/include/asm/def_LPBlackfin.h b/arch/blackfin/include/asm/def_LPBlackfin.h index f342ff0319df..e3f0f4c49819 100644 --- a/arch/blackfin/include/asm/def_LPBlackfin.h +++ b/arch/blackfin/include/asm/def_LPBlackfin.h @@ -50,6 +50,23 @@ #define bfin_write16(addr, val) _bfin_writeX(addr, val, 16, w) #define bfin_write32(addr, val) _bfin_writeX(addr, val, 32, ) +#define bfin_read(addr) \ +({ \ + sizeof(*(addr)) == 1 ? bfin_read8(addr) : \ + sizeof(*(addr)) == 2 ? bfin_read16(addr) : \ + sizeof(*(addr)) == 4 ? bfin_read32(addr) : \ + ({ BUG(); 0; }); \ +}) +#define bfin_write(addr, val) \ +({ \ + switch (sizeof(*(addr))) { \ + case 1: bfin_write8(addr, val); break; \ + case 2: bfin_write16(addr, val); break; \ + case 4: bfin_write32(addr, val); break; \ + default: BUG(); \ + } \ +}) + #endif /* __ASSEMBLY__ */ /************************************************** @@ -377,6 +394,7 @@ #define EVT13 0xFFE02034 /* Event Vector 13 ESR Address */ #define EVT14 0xFFE02038 /* Event Vector 14 ESR Address */ #define EVT15 0xFFE0203C /* Event Vector 15 ESR Address */ +#define EVT_OVERRIDE 0xFFE02100 /* Event Vector Override Register */ #define IMASK 0xFFE02104 /* Interrupt Mask Register */ #define IPEND 0xFFE02108 /* Interrupt Pending Register */ #define ILAT 0xFFE0210C /* Interrupt Latch Register */ diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h index 2c09b1d50ec9..eedf3ca65ba2 100644 --- a/arch/blackfin/include/asm/dma.h +++ b/arch/blackfin/include/asm/dma.h @@ -276,6 +276,7 @@ static inline void clear_dma_irqstat(unsigned int channel) } void *dma_memcpy(void *dest, const void *src, size_t count); +void *dma_memcpy_nocache(void *dest, const void *src, size_t count); void *safe_dma_memcpy(void *dest, const void *src, size_t count); void blackfin_dma_early_init(void); void early_dma_memcpy(void *dest, const void *src, size_t count); diff --git a/arch/blackfin/include/asm/elf.h b/arch/blackfin/include/asm/elf.h index 117713adea7f..e6c6812a9abd 100644 --- a/arch/blackfin/include/asm/elf.h +++ b/arch/blackfin/include/asm/elf.h @@ -119,6 +119,7 @@ do { \ #define ELF_CORE_COPY_REGS(pr_reg, regs) \ memcpy((char *) &pr_reg, (char *)regs, \ sizeof(struct pt_regs)); +#define ELF_CORE_COPY_FPREGS(...) 0 /* Blackfin has no FPU */ /* This yields a mask that user programs can use to figure out what instruction set this cpu supports. */ diff --git a/arch/blackfin/include/asm/ftrace.h b/arch/blackfin/include/asm/ftrace.h index 4cfe2d9ba7e8..8a029505d7b7 100644 --- a/arch/blackfin/include/asm/ftrace.h +++ b/arch/blackfin/include/asm/ftrace.h @@ -12,6 +12,22 @@ #ifndef __ASSEMBLY__ +#ifdef CONFIG_DYNAMIC_FTRACE + +extern void _mcount(void); +#define MCOUNT_ADDR ((unsigned long)_mcount) + +static inline unsigned long ftrace_call_adjust(unsigned long addr) +{ + return addr; +} + +struct dyn_arch_ftrace { + /* No extra data needed for Blackfin */ +}; + +#endif + #ifdef CONFIG_FRAME_POINTER #include <linux/mm.h> diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h index 01b19d0cf509..1ef8417f5d27 100644 --- a/arch/blackfin/include/asm/gpio.h +++ b/arch/blackfin/include/asm/gpio.h @@ -7,63 +7,63 @@ #ifndef __ARCH_BLACKFIN_GPIO_H__ #define __ARCH_BLACKFIN_GPIO_H__ -#define gpio_bank(x) ((x) >> 4) -#define gpio_bit(x) (1<<((x) & 0xF)) -#define gpio_sub_n(x) ((x) & 0xF) +#define gpio_bank(x) ((x) >> 4) +#define gpio_bit(x) (1<<((x) & 0xF)) +#define gpio_sub_n(x) ((x) & 0xF) -#define GPIO_BANKSIZE 16 -#define GPIO_BANK_NUM DIV_ROUND_UP(MAX_BLACKFIN_GPIOS, GPIO_BANKSIZE) +#define GPIO_BANKSIZE 16 +#define GPIO_BANK_NUM DIV_ROUND_UP(MAX_BLACKFIN_GPIOS, GPIO_BANKSIZE) #include <mach/gpio.h> -#define GPIO_0 0 -#define GPIO_1 1 -#define GPIO_2 2 -#define GPIO_3 3 -#define GPIO_4 4 -#define GPIO_5 5 -#define GPIO_6 6 -#define GPIO_7 7 -#define GPIO_8 8 -#define GPIO_9 9 -#define GPIO_10 10 -#define GPIO_11 11 -#define GPIO_12 12 -#define GPIO_13 13 -#define GPIO_14 14 -#define GPIO_15 15 -#define GPIO_16 16 -#define GPIO_17 17 -#define GPIO_18 18 -#define GPIO_19 19 -#define GPIO_20 20 -#define GPIO_21 21 -#define GPIO_22 22 -#define GPIO_23 23 -#define GPIO_24 24 -#define GPIO_25 25 -#define GPIO_26 26 -#define GPIO_27 27 -#define GPIO_28 28 -#define GPIO_29 29 -#define GPIO_30 30 -#define GPIO_31 31 -#define GPIO_32 32 -#define GPIO_33 33 -#define GPIO_34 34 -#define GPIO_35 35 -#define GPIO_36 36 -#define GPIO_37 37 -#define GPIO_38 38 -#define GPIO_39 39 -#define GPIO_40 40 -#define GPIO_41 41 -#define GPIO_42 42 -#define GPIO_43 43 -#define GPIO_44 44 -#define GPIO_45 45 -#define GPIO_46 46 -#define GPIO_47 47 +#define GPIO_0 0 +#define GPIO_1 1 +#define GPIO_2 2 +#define GPIO_3 3 +#define GPIO_4 4 +#define GPIO_5 5 +#define GPIO_6 6 +#define GPIO_7 7 +#define GPIO_8 8 +#define GPIO_9 9 +#define GPIO_10 10 +#define GPIO_11 11 +#define GPIO_12 12 +#define GPIO_13 13 +#define GPIO_14 14 +#define GPIO_15 15 +#define GPIO_16 16 +#define GPIO_17 17 +#define GPIO_18 18 +#define GPIO_19 19 +#define GPIO_20 20 +#define GPIO_21 21 +#define GPIO_22 22 +#define GPIO_23 23 +#define GPIO_24 24 +#define GPIO_25 25 +#define GPIO_26 26 +#define GPIO_27 27 +#define GPIO_28 28 +#define GPIO_29 29 +#define GPIO_30 30 +#define GPIO_31 31 +#define GPIO_32 32 +#define GPIO_33 33 +#define GPIO_34 34 +#define GPIO_35 35 +#define GPIO_36 36 +#define GPIO_37 37 +#define GPIO_38 38 +#define GPIO_39 39 +#define GPIO_40 40 +#define GPIO_41 41 +#define GPIO_42 42 +#define GPIO_43 43 +#define GPIO_44 44 +#define GPIO_45 45 +#define GPIO_46 46 +#define GPIO_47 47 #define PERIPHERAL_USAGE 1 #define GPIO_USAGE 0 @@ -279,6 +279,11 @@ static inline int gpio_direction_output(unsigned gpio, int value) return bfin_gpio_direction_output(gpio, value); } +static inline int gpio_set_debounce(unsigned gpio, unsigned debounce) +{ + return -EINVAL; +} + static inline int gpio_get_value(unsigned gpio) { return bfin_gpio_get_value(gpio); diff --git a/arch/blackfin/include/asm/io.h b/arch/blackfin/include/asm/io.h index 29e55b9d88bc..234fbac17ec1 100644 --- a/arch/blackfin/include/asm/io.h +++ b/arch/blackfin/include/asm/io.h @@ -124,7 +124,13 @@ static inline unsigned int readl(const volatile void __iomem *addr) #define iowrite16(val, x) writew(val, x) #define iowrite32(val, x) writel(val, x) -#define mmiowb() wmb() +/** + * I/O write barrier + * + * Ensure ordering of I/O space writes. This will make sure that writes + * following the barrier will arrive after all previous writes. + */ +#define mmiowb() do { SSYNC(); wmb(); } while (0) #define IO_SPACE_LIMIT 0xffffffff diff --git a/arch/blackfin/include/asm/mem_init.h b/arch/blackfin/include/asm/mem_init.h index 7c8fe834ff22..237579935e29 100644 --- a/arch/blackfin/include/asm/mem_init.h +++ b/arch/blackfin/include/asm/mem_init.h @@ -10,7 +10,6 @@ #if defined(CONFIG_MEM_MT48LC16M16A2TG_75) || \ defined(CONFIG_MEM_MT48LC64M4A2FB_7E) || \ defined(CONFIG_MEM_MT48LC16M8A2TG_75) || \ - defined(CONFIG_MEM_GENERIC_BOARD) || \ defined(CONFIG_MEM_MT48LC32M8A2_75) || \ defined(CONFIG_MEM_MT48LC8M32B2B5_7) || \ defined(CONFIG_MEM_MT48LC32M16A2TG_75) || \ @@ -178,7 +177,6 @@ #if defined(CONFIG_MEM_MT48LC32M8A2_75) || \ defined(CONFIG_MEM_MT48LC64M4A2FB_7E) || \ - defined(CONFIG_MEM_GENERIC_BOARD) || \ defined(CONFIG_MEM_MT48LC32M16A2TG_75) || \ defined(CONFIG_MEM_MT48LC16M16A2TG_75) || \ defined(CONFIG_MEM_MT48LC32M8A2_75) @@ -248,22 +246,6 @@ #define DDR_tWR DDR_TWR(MIN_DDR_SCLK(15)) #endif -#if defined(CONFIG_MEM_GENERIC_BOARD) -#define DDR_SIZE DEVSZ_512 -#define DDR_WIDTH DEVWD_16 -#define DDR_MAX_tCK 13 - -#define DDR_tRCD DDR_TRCD(3) -#define DDR_tWTR DDR_TWTR(2) -#define DDR_tWR DDR_TWR(2) -#define DDR_tMRD DDR_TMRD(2) -#define DDR_tRP DDR_TRP(3) -#define DDR_tRAS DDR_TRAS(7) -#define DDR_tRC DDR_TRC(10) -#define DDR_tRFC DDR_TRFC(12) -#define DDR_tREFI DDR_TREFI(1288) -#endif - #if (CONFIG_SCLK_HZ < DDR_CLK_HZ(DDR_MAX_tCK)) # error "CONFIG_SCLK_HZ is too small (<DDR_CLK_HZ(DDR_MAX_tCK) Hz)." #elif(CONFIG_SCLK_HZ <= 133333333) diff --git a/arch/blackfin/include/asm/portmux.h b/arch/blackfin/include/asm/portmux.h index edd8ef3a3788..9b1e2c37b324 100644 --- a/arch/blackfin/include/asm/portmux.h +++ b/arch/blackfin/include/asm/portmux.h @@ -1,9 +1,9 @@ /* * Common header file for Blackfin family of processors * -Â * Copyright 2007-2008 Analog Devices Inc. -Â * -Â * Licensed under the GPL-2 or later. + * Copyright 2007-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. */ #ifndef _PORTMUX_H_ @@ -1042,8 +1042,8 @@ void peripheral_free_list(const unsigned short per[]); #define P_NOR_CLK P_UNDEF #endif -#ifndef P_TMRCLK -#define P_TMRCLK P_UNDEF +#ifndef P_TMRCLK +#define P_TMRCLK P_UNDEF #endif #ifndef P_AMC_ARDY_NOR_WAIT diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index 30d0d1f01dc7..ca5ccc777772 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -16,6 +16,7 @@ else obj-y += time.o endif +obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_FUNCTION_TRACER) += ftrace-entry.o obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o CFLAGS_REMOVE_ftrace.o = -pg diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 26403d1c9e65..1e485dfdc9f2 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -450,7 +450,6 @@ void *dma_memcpy(void *pdst, const void *psrc, size_t size) { unsigned long dst = (unsigned long)pdst; unsigned long src = (unsigned long)psrc; - size_t bulk, rest; if (bfin_addr_dcacheable(src)) blackfin_dcache_flush_range(src, src + size); @@ -458,6 +457,22 @@ void *dma_memcpy(void *pdst, const void *psrc, size_t size) if (bfin_addr_dcacheable(dst)) blackfin_dcache_invalidate_range(dst, dst + size); + return dma_memcpy_nocache(pdst, psrc, size); +} +EXPORT_SYMBOL(dma_memcpy); + +/** + * dma_memcpy_nocache - DMA memcpy under mutex lock + * - No cache flush/invalidate + * + * Do not check arguments before starting the DMA memcpy. Break the transfer + * up into two pieces. The first transfer is in multiples of 64k and the + * second transfer is the piece smaller than 64k. + */ +void *dma_memcpy_nocache(void *pdst, const void *psrc, size_t size) +{ + size_t bulk, rest; + bulk = size & ~0xffff; rest = size - bulk; if (bulk) @@ -465,7 +480,7 @@ void *dma_memcpy(void *pdst, const void *psrc, size_t size) _dma_memcpy(pdst + bulk, psrc + bulk, rest); return pdst; } -EXPORT_SYMBOL(dma_memcpy); +EXPORT_SYMBOL(dma_memcpy_nocache); /** * safe_dma_memcpy - DMA memcpy w/argument checking diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index 42833ee2b308..dc07ed08b37f 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -108,11 +108,7 @@ static unsigned short * const port_fer[] = { }; #endif -static unsigned short reserved_gpio_map[GPIO_BANK_NUM]; -static unsigned short reserved_peri_map[gpio_bank(MAX_RESOURCES)]; -static unsigned short reserved_gpio_irq_map[GPIO_BANK_NUM]; - -#define RESOURCE_LABEL_SIZE 16 +#define RESOURCE_LABEL_SIZE 16 static struct str_ident { char name[RESOURCE_LABEL_SIZE]; @@ -122,19 +118,6 @@ static struct str_ident { static struct gpio_port_s gpio_bank_saved[GPIO_BANK_NUM]; #endif -inline int check_gpio(unsigned gpio) -{ -#if defined(CONFIG_BF54x) - if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15 - || gpio == GPIO_PH14 || gpio == GPIO_PH15 - || gpio == GPIO_PJ14 || gpio == GPIO_PJ15) - return -EINVAL; -#endif - if (gpio >= MAX_BLACKFIN_GPIOS) - return -EINVAL; - return 0; -} - static void gpio_error(unsigned gpio) { printk(KERN_ERR "bfin-gpio: GPIO %d wasn't requested!\n", gpio); @@ -167,6 +150,29 @@ static int cmp_label(unsigned short ident, const char *label) return -EINVAL; } +#define map_entry(m, i) reserved_##m##_map[gpio_bank(i)] +#define is_reserved(m, i, e) (map_entry(m, i) & gpio_bit(i)) +#define reserve(m, i) (map_entry(m, i) |= gpio_bit(i)) +#define unreserve(m, i) (map_entry(m, i) &= ~gpio_bit(i)) +#define DECLARE_RESERVED_MAP(m, c) static unsigned short reserved_##m##_map[c] + +DECLARE_RESERVED_MAP(gpio, GPIO_BANK_NUM); +DECLARE_RESERVED_MAP(peri, DIV_ROUND_UP(MAX_RESOURCES, GPIO_BANKSIZE)); +DECLARE_RESERVED_MAP(gpio_irq, GPIO_BANK_NUM); + +inline int check_gpio(unsigned gpio) +{ +#if defined(CONFIG_BF54x) + if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15 + || gpio == GPIO_PH14 || gpio == GPIO_PH15 + || gpio == GPIO_PJ14 || gpio == GPIO_PJ15) + return -EINVAL; +#endif + if (gpio >= MAX_BLACKFIN_GPIOS) + return -EINVAL; + return 0; +} + static void port_setup(unsigned gpio, unsigned short usage) { #if defined(BF538_FAMILY) @@ -475,7 +481,7 @@ GET_GPIO_P(maskb) #ifdef CONFIG_PM -static unsigned short wakeup_map[GPIO_BANK_NUM]; +DECLARE_RESERVED_MAP(wakeup, GPIO_BANK_NUM); static const unsigned int sic_iwr_irqs[] = { #if defined(BF533_FAMILY) @@ -521,9 +527,9 @@ int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl) local_irq_save_hw(flags); if (ctrl) - wakeup_map[gpio_bank(gpio)] |= gpio_bit(gpio); + reserve(wakeup, gpio); else - wakeup_map[gpio_bank(gpio)] &= ~gpio_bit(gpio); + unreserve(wakeup, gpio); set_gpio_maskb(gpio, ctrl); local_irq_restore_hw(flags); @@ -536,7 +542,7 @@ int bfin_pm_standby_ctrl(unsigned ctrl) u16 bank, mask, i; for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { - mask = wakeup_map[gpio_bank(i)]; + mask = map_entry(wakeup, i); bank = gpio_bank(i); if (mask) @@ -653,7 +659,7 @@ EXPORT_SYMBOL(get_gpio_dir); /*********************************************************** * -* FUNCTIONS: Blackfin Peripheral Resource Allocation +* FUNCTIONS: Blackfin Peripheral Resource Allocation * and PortMux Setup * * INPUTS/OUTPUTS: @@ -689,8 +695,7 @@ int peripheral_request(unsigned short per, const char *label) /* If a pin can be muxed as either GPIO or peripheral, make * sure it is not already a GPIO pin when we request it. */ - if (unlikely(!check_gpio(ident) && - reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) { + if (unlikely(!check_gpio(ident) && is_reserved(gpio, ident, 1))) { if (system_state == SYSTEM_BOOTING) dump_stack(); printk(KERN_ERR @@ -700,7 +705,7 @@ int peripheral_request(unsigned short per, const char *label) return -EBUSY; } - if (unlikely(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident))) { + if (unlikely(is_reserved(peri, ident, 1))) { /* * Pin functions like AMC address strobes my @@ -731,7 +736,7 @@ int peripheral_request(unsigned short per, const char *label) } anyway: - reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident); + reserve(peri, ident); portmux_setup(per); port_setup(ident, PERIPHERAL_USAGE); @@ -777,7 +782,7 @@ void peripheral_free(unsigned short per) local_irq_save_hw(flags); - if (unlikely(!(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident)))) { + if (unlikely(!is_reserved(peri, ident, 0))) { local_irq_restore_hw(flags); return; } @@ -785,7 +790,7 @@ void peripheral_free(unsigned short per) if (!(per & P_MAYSHARE)) port_setup(ident, GPIO_USAGE); - reserved_peri_map[gpio_bank(ident)] &= ~gpio_bit(ident); + unreserve(peri, ident); set_label(ident, "free"); @@ -836,7 +841,7 @@ int bfin_gpio_request(unsigned gpio, const char *label) return 0; } - if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + if (unlikely(is_reserved(gpio, gpio, 1))) { if (system_state == SYSTEM_BOOTING) dump_stack(); printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n", @@ -844,7 +849,7 @@ int bfin_gpio_request(unsigned gpio, const char *label) local_irq_restore_hw(flags); return -EBUSY; } - if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + if (unlikely(is_reserved(peri, gpio, 1))) { if (system_state == SYSTEM_BOOTING) dump_stack(); printk(KERN_ERR @@ -853,7 +858,7 @@ int bfin_gpio_request(unsigned gpio, const char *label) local_irq_restore_hw(flags); return -EBUSY; } - if (unlikely(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + if (unlikely(is_reserved(gpio_irq, gpio, 1))) { printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved as gpio-irq!" " (Documentation/blackfin/bfin-gpio-notes.txt)\n", gpio); } @@ -863,7 +868,7 @@ int bfin_gpio_request(unsigned gpio, const char *label) } #endif - reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio); + reserve(gpio, gpio); set_label(gpio, label); local_irq_restore_hw(flags); @@ -885,7 +890,7 @@ void bfin_gpio_free(unsigned gpio) local_irq_save_hw(flags); - if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) { + if (unlikely(!is_reserved(gpio, gpio, 0))) { if (system_state == SYSTEM_BOOTING) dump_stack(); gpio_error(gpio); @@ -893,7 +898,7 @@ void bfin_gpio_free(unsigned gpio) return; } - reserved_gpio_map[gpio_bank(gpio)] &= ~gpio_bit(gpio); + unreserve(gpio, gpio); set_label(gpio, "free"); @@ -902,7 +907,7 @@ void bfin_gpio_free(unsigned gpio) EXPORT_SYMBOL(bfin_gpio_free); #ifdef BFIN_SPECIAL_GPIO_BANKS -static unsigned short reserved_special_gpio_map[gpio_bank(MAX_RESOURCES)]; +DECLARE_RESERVED_MAP(special_gpio, gpio_bank(MAX_RESOURCES)); int bfin_special_gpio_request(unsigned gpio, const char *label) { @@ -921,14 +926,14 @@ int bfin_special_gpio_request(unsigned gpio, const char *label) return 0; } - if (unlikely(reserved_special_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + if (unlikely(is_reserved(special_gpio, gpio, 1))) { local_irq_restore_hw(flags); printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n", gpio, get_label(gpio)); return -EBUSY; } - if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + if (unlikely(is_reserved(peri, gpio, 1))) { local_irq_restore_hw(flags); printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n", @@ -937,8 +942,8 @@ int bfin_special_gpio_request(unsigned gpio, const char *label) return -EBUSY; } - reserved_special_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio); - reserved_peri_map[gpio_bank(gpio)] |= gpio_bit(gpio); + reserve(special_gpio, gpio); + reserve(peri, gpio); set_label(gpio, label); local_irq_restore_hw(flags); @@ -956,14 +961,14 @@ void bfin_special_gpio_free(unsigned gpio) local_irq_save_hw(flags); - if (unlikely(!(reserved_special_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) { + if (unlikely(!is_reserved(special_gpio, gpio, 0))) { gpio_error(gpio); local_irq_restore_hw(flags); return; } - reserved_special_gpio_map[gpio_bank(gpio)] &= ~gpio_bit(gpio); - reserved_peri_map[gpio_bank(gpio)] &= ~gpio_bit(gpio); + unreserve(special_gpio, gpio); + unreserve(peri, gpio); set_label(gpio, "free"); local_irq_restore_hw(flags); } @@ -980,7 +985,7 @@ int bfin_gpio_irq_request(unsigned gpio, const char *label) local_irq_save_hw(flags); - if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + if (unlikely(is_reserved(peri, gpio, 1))) { if (system_state == SYSTEM_BOOTING) dump_stack(); printk(KERN_ERR @@ -989,12 +994,12 @@ int bfin_gpio_irq_request(unsigned gpio, const char *label) local_irq_restore_hw(flags); return -EBUSY; } - if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) + if (unlikely(is_reserved(gpio, gpio, 1))) printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved by %s! " "(Documentation/blackfin/bfin-gpio-notes.txt)\n", gpio, get_label(gpio)); - reserved_gpio_irq_map[gpio_bank(gpio)] |= gpio_bit(gpio); + reserve(gpio_irq, gpio); set_label(gpio, label); local_irq_restore_hw(flags); @@ -1013,7 +1018,7 @@ void bfin_gpio_irq_free(unsigned gpio) local_irq_save_hw(flags); - if (unlikely(!(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio)))) { + if (unlikely(!is_reserved(gpio_irq, gpio, 0))) { if (system_state == SYSTEM_BOOTING) dump_stack(); gpio_error(gpio); @@ -1021,7 +1026,7 @@ void bfin_gpio_irq_free(unsigned gpio) return; } - reserved_gpio_irq_map[gpio_bank(gpio)] &= ~gpio_bit(gpio); + unreserve(gpio_irq, gpio); set_label(gpio, "free"); @@ -1042,7 +1047,7 @@ int bfin_gpio_direction_input(unsigned gpio) { unsigned long flags; - if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + if (unlikely(!is_reserved(gpio, gpio, 0))) { gpio_error(gpio); return -EINVAL; } @@ -1084,7 +1089,7 @@ int bfin_gpio_direction_output(unsigned gpio, int value) { unsigned long flags; - if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + if (unlikely(!is_reserved(gpio, gpio, 0))) { gpio_error(gpio); return -EINVAL; } @@ -1153,13 +1158,13 @@ static int gpio_proc_read(char *buf, char **start, off_t offset, int c, irq, gpio, outlen = 0; for (c = 0; c < MAX_RESOURCES; c++) { - irq = reserved_gpio_irq_map[gpio_bank(c)] & gpio_bit(c); - gpio = reserved_gpio_map[gpio_bank(c)] & gpio_bit(c); + irq = is_reserved(gpio_irq, c, 1); + gpio = is_reserved(gpio, c, 1); if (!check_gpio(c) && (gpio || irq)) len = sprintf(buf, "GPIO_%d: \t%s%s \t\tGPIO %s\n", c, get_label(c), (gpio && irq) ? " *" : "", get_gpio_dir(c) ? "OUTPUT" : "INPUT"); - else if (reserved_peri_map[gpio_bank(c)] & gpio_bit(c)) + else if (is_reserved(peri, c, 1)) len = sprintf(buf, "GPIO_%d: \t%s \t\tPeripheral\n", c, get_label(c)); else continue; diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c index 30fd6417f069..c15fd05f0b09 100644 --- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c @@ -13,10 +13,6 @@ #include <asm/cplbinit.h> #include <asm/mem_map.h> -#if ANOMALY_05000263 -# error the MPU will not function safely while Anomaly 05000263 applies -#endif - struct cplb_entry icplb_tbl[NR_CPUS][MAX_CPLBS]; struct cplb_entry dcplb_tbl[NR_CPUS][MAX_CPLBS]; diff --git a/arch/blackfin/kernel/ftrace-entry.S b/arch/blackfin/kernel/ftrace-entry.S index d66446b572c0..7eed00bbd26d 100644 --- a/arch/blackfin/kernel/ftrace-entry.S +++ b/arch/blackfin/kernel/ftrace-entry.S @@ -10,6 +10,18 @@ .text +#ifdef CONFIG_DYNAMIC_FTRACE + +/* Simple stub so we can boot the kernel until runtime patching has + * disabled all calls to this. Then it'll be unused. + */ +ENTRY(__mcount) +# if ANOMALY_05000371 + nop; nop; nop; nop; +# endif + rts; +ENDPROC(__mcount) + /* GCC will have called us before setting up the function prologue, so we * can clobber the normal scratch registers, but we need to make sure to * save/restore the registers used for argument passing (R0-R2) in case @@ -20,15 +32,65 @@ * function. And since GCC pushed the previous RETS for us, the previous * function will be waiting there. mmmm pie. */ +ENTRY(_ftrace_caller) +# ifdef CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST + /* optional micro optimization: return if stopped */ + p1.l = _function_trace_stop; + p1.h = _function_trace_stop; + r3 = [p1]; + cc = r3 == 0; + if ! cc jump _ftrace_stub (bp); +# endif + + /* save first/second/third function arg and the return register */ + [--sp] = r2; + [--sp] = r0; + [--sp] = r1; + [--sp] = rets; + + /* function_trace_call(unsigned long ip, unsigned long parent_ip): + * ip: this point was called by ... + * parent_ip: ... this function + * the ip itself will need adjusting for the mcount call + */ + r0 = rets; + r1 = [sp + 16]; /* skip the 4 local regs on stack */ + r0 += -MCOUNT_INSN_SIZE; + +.globl _ftrace_call +_ftrace_call: + call _ftrace_stub + +# ifdef CONFIG_FUNCTION_GRAPH_TRACER +.globl _ftrace_graph_call +_ftrace_graph_call: + nop; /* jump _ftrace_graph_caller; */ +# endif + + /* restore state and get out of dodge */ +.Lfinish_trace: + rets = [sp++]; + r1 = [sp++]; + r0 = [sp++]; + r2 = [sp++]; + +.globl _ftrace_stub +_ftrace_stub: + rts; +ENDPROC(_ftrace_caller) + +#else + +/* See documentation for _ftrace_caller */ ENTRY(__mcount) -#ifdef CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST +# ifdef CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST /* optional micro optimization: return if stopped */ p1.l = _function_trace_stop; p1.h = _function_trace_stop; r3 = [p1]; cc = r3 == 0; if ! cc jump _ftrace_stub (bp); -#endif +# endif /* save third function arg early so we can do testing below */ [--sp] = r2; @@ -44,7 +106,7 @@ ENTRY(__mcount) cc = r2 == r3; if ! cc jump .Ldo_trace; -#ifdef CONFIG_FUNCTION_GRAPH_TRACER +# ifdef CONFIG_FUNCTION_GRAPH_TRACER /* if the ftrace_graph_return function pointer is not set to * the ftrace_stub entry, call prepare_ftrace_return(). */ @@ -64,7 +126,7 @@ ENTRY(__mcount) r3 = [p0]; cc = r2 == r3; if ! cc jump _ftrace_graph_caller; -#endif +# endif r2 = [sp++]; rts; @@ -103,6 +165,8 @@ _ftrace_stub: rts; ENDPROC(__mcount) +#endif + #ifdef CONFIG_FUNCTION_GRAPH_TRACER /* The prepare_ftrace_return() function is similar to the trace function * except it takes a pointer to the location of the frompc. This is so @@ -110,6 +174,7 @@ ENDPROC(__mcount) * purposes. */ ENTRY(_ftrace_graph_caller) +# ifndef CONFIG_DYNAMIC_FTRACE /* save first/second function arg and the return register */ [--sp] = r0; [--sp] = r1; @@ -118,9 +183,13 @@ ENTRY(_ftrace_graph_caller) /* prepare_ftrace_return(parent, self_addr, frame_pointer) */ r0 = sp; /* unsigned long *parent */ r1 = rets; /* unsigned long self_addr */ -#ifdef CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST +# else + r0 = sp; /* unsigned long *parent */ + r1 = [sp]; /* unsigned long self_addr */ +# endif +# ifdef CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST r2 = fp; /* unsigned long frame_pointer */ -#endif +# endif r0 += 16; /* skip the 4 local regs on stack */ r1 += -MCOUNT_INSN_SIZE; call _prepare_ftrace_return; @@ -139,9 +208,9 @@ ENTRY(_return_to_handler) [--sp] = r1; /* get original return address */ -#ifdef CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST +# ifdef CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST r0 = fp; /* Blackfin is sane, so omit this */ -#endif +# endif call _ftrace_return_to_handler; rets = r0; diff --git a/arch/blackfin/kernel/ftrace.c b/arch/blackfin/kernel/ftrace.c index a61d948ea925..48808a12b427 100644 --- a/arch/blackfin/kernel/ftrace.c +++ b/arch/blackfin/kernel/ftrace.c @@ -1,17 +1,101 @@ /* * ftrace graph code * - * Copyright (C) 2009 Analog Devices Inc. + * Copyright (C) 2009-2010 Analog Devices Inc. * Licensed under the GPL-2 or later. */ #include <linux/ftrace.h> #include <linux/kernel.h> #include <linux/sched.h> +#include <linux/uaccess.h> #include <asm/atomic.h> +#include <asm/cacheflush.h> + +#ifdef CONFIG_DYNAMIC_FTRACE + +static const unsigned char mnop[] = { + 0x03, 0xc0, 0x00, 0x18, /* MNOP; */ + 0x03, 0xc0, 0x00, 0x18, /* MNOP; */ +}; + +static void bfin_make_pcrel24(unsigned char *insn, unsigned long src, + unsigned long dst) +{ + uint32_t pcrel = (dst - src) >> 1; + insn[0] = pcrel >> 16; + insn[1] = 0xe3; + insn[2] = pcrel; + insn[3] = pcrel >> 8; +} +#define bfin_make_pcrel24(insn, src, dst) bfin_make_pcrel24(insn, src, (unsigned long)(dst)) + +static int ftrace_modify_code(unsigned long ip, const unsigned char *code, + unsigned long len) +{ + int ret = probe_kernel_write((void *)ip, (void *)code, len); + flush_icache_range(ip, ip + len); + return ret; +} + +int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec, + unsigned long addr) +{ + /* Turn the mcount call site into two MNOPs as those are 32bit insns */ + return ftrace_modify_code(rec->ip, mnop, sizeof(mnop)); +} + +int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) +{ + /* Restore the mcount call site */ + unsigned char call[8]; + call[0] = 0x67; /* [--SP] = RETS; */ + call[1] = 0x01; + bfin_make_pcrel24(&call[2], rec->ip + 2, addr); + call[6] = 0x27; /* RETS = [SP++]; */ + call[7] = 0x01; + return ftrace_modify_code(rec->ip, call, sizeof(call)); +} + +int ftrace_update_ftrace_func(ftrace_func_t func) +{ + unsigned char call[4]; + unsigned long ip = (unsigned long)&ftrace_call; + bfin_make_pcrel24(call, ip, func); + return ftrace_modify_code(ip, call, sizeof(call)); +} + +int __init ftrace_dyn_arch_init(void *data) +{ + /* return value is done indirectly via data */ + *(unsigned long *)data = 0; + + return 0; +} + +#endif #ifdef CONFIG_FUNCTION_GRAPH_TRACER +# ifdef CONFIG_DYNAMIC_FTRACE + +extern void ftrace_graph_call(void); + +int ftrace_enable_ftrace_graph_caller(void) +{ + unsigned long ip = (unsigned long)&ftrace_graph_call; + uint16_t jump_pcrel12 = ((unsigned long)&ftrace_graph_caller - ip) >> 1; + jump_pcrel12 |= 0x2000; + return ftrace_modify_code(ip, (void *)&jump_pcrel12, sizeof(jump_pcrel12)); +} + +int ftrace_disable_ftrace_graph_caller(void) +{ + return ftrace_modify_code((unsigned long)&ftrace_graph_call, empty_zero_page, 2); +} + +# endif + /* * Hook the return address and push it in the stack of return addrs * in current thread info. diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index d37a397f43f5..ac71dc15cbdb 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -864,6 +864,13 @@ void __init setup_arch(char **cmdline_p) bfin_write_EBIU_MODE(CONFIG_EBIU_MODEVAL); bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTLVAL); #endif +#ifdef CONFIG_BFIN_HYSTERESIS_CONTROL + bfin_write_PORTF_HYSTERISIS(HYST_PORTF_0_15); + bfin_write_PORTG_HYSTERISIS(HYST_PORTG_0_15); + bfin_write_PORTH_HYSTERISIS(HYST_PORTH_0_15); + bfin_write_MISCPORT_HYSTERISIS((bfin_read_MISCPORT_HYSTERISIS() & + ~HYST_NONEGPIO_MASK) | HYST_NONEGPIO); +#endif cclk = get_cclk(); sclk = get_sclk(); diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index 984c78172397..4122678529c0 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -48,15 +48,10 @@ SECTIONS #if !L1_CODE_LENGTH *(.l1.text) #endif - - . = ALIGN(16); - ___start___ex_table = .; - *(__ex_table) - ___stop___ex_table = .; - __etext = .; } + EXCEPTION_TABLE(4) NOTES /* Just in case the first read only is a 32-bit access */ diff --git a/arch/blackfin/mach-bf518/Kconfig b/arch/blackfin/mach-bf518/Kconfig index 4ab2d166c832..1d9f631a7f94 100644 --- a/arch/blackfin/mach-bf518/Kconfig +++ b/arch/blackfin/mach-bf518/Kconfig @@ -62,6 +62,67 @@ config BF518_UART1_PORTG PORT G endchoice +comment "Hysteresis/Schmitt Trigger Control" +config BFIN_HYSTERESIS_CONTROL + bool "Enable Hysteresis Control" + help + The ADSP-BF51x allows to control input hysteresis for Port F, + Port G and Port H and other processor signal inputs. + The Schmitt trigger enables can be set only for pin groups. + Saying Y will overwrite the default reset or boot loader + initialization. + +menu "PORT F" + depends on BFIN_HYSTERESIS_CONTROL +config GPIO_HYST_PORTF_0_7 + bool "Enable Hysteresis on PORTF {0...7}" +config GPIO_HYST_PORTF_8_9 + bool "Enable Hysteresis on PORTF {8, 9}" +config GPIO_HYST_PORTF_10 + bool "Enable Hysteresis on PORTF 10" +config GPIO_HYST_PORTF_11 + bool "Enable Hysteresis on PORTF 11" +config GPIO_HYST_PORTF_12_13 + bool "Enable Hysteresis on PORTF {12, 13}" +config GPIO_HYST_PORTF_14_15 + bool "Enable Hysteresis on PORTF {14, 15}" +endmenu + +menu "PORT G" + depends on BFIN_HYSTERESIS_CONTROL +config GPIO_HYST_PORTG_0 + bool "Enable Hysteresis on PORTG 0" +config GPIO_HYST_PORTG_1_4 + bool "Enable Hysteresis on PORTG {1...4}" +config GPIO_HYST_PORTG_5_6 + bool "Enable Hysteresis on PORTG {5, 6}" +config GPIO_HYST_PORTG_7_8 + bool "Enable Hysteresis on PORTG {7, 8}" +config GPIO_HYST_PORTG_9 + bool "Enable Hysteresis on PORTG 9" +config GPIO_HYST_PORTG_10 + bool "Enable Hysteresis on PORTG 10" +config GPIO_HYST_PORTG_11_13 + bool "Enable Hysteresis on PORTG {11...13}" +config GPIO_HYST_PORTG_14_15 + bool "Enable Hysteresis on PORTG {14, 15}" +endmenu + +menu "PORT H" + depends on BFIN_HYSTERESIS_CONTROL +config GPIO_HYST_PORTH_0_7 + bool "Enable Hysteresis on PORTH {0...7}" + +endmenu + +menu "None-GPIO" + depends on BFIN_HYSTERESIS_CONTROL +config NONEGPIO_HYST_NMI_RST_BMODE + bool "Enable Hysteresis on {NMI, RESET, BMODE}" +config NONEGPIO_HYST_JTAG + bool "Enable Hysteresis on JTAG" +endmenu + comment "Interrupt Priority Assignment" menu "Priority" diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h index 2829dd0400f1..24918c5f7ea1 100644 --- a/arch/blackfin/mach-bf518/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h @@ -5,13 +5,13 @@ * and can be replaced with that version at any time * DO NOT EDIT THIS FILE * - * Copyright 2004-2009 Analog Devices Inc. + * Copyright 2004-2010 Analog Devices Inc. * Licensed under the ADI BSD license. * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: - * - Revision C, 06/12/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List + * - Revision E, 01/26/2010; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List */ /* We plan on not supporting 0.0 silicon, but 0.1 isn't out yet - sorry */ @@ -24,6 +24,8 @@ /* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ #define ANOMALY_05000074 (1) +/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ +#define ANOMALY_05000119 (1) /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) /* False Hardware Error from an Access in the Shadow of a Conditional Branch */ @@ -52,6 +54,8 @@ #define ANOMALY_05000430 (__SILICON_REVISION__ < 1) /* Incorrect Use of Stack in Lockbox Firmware During Authentication */ #define ANOMALY_05000431 (1) +/* SW Breakpoints Ignored Upon Return From Lockbox Authentication */ +#define ANOMALY_05000434 (1) /* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */ #define ANOMALY_05000435 (__SILICON_REVISION__ < 1) /* PORTx_DRIVE and PORTx_HYSTERESIS Registers Read Back Incorrect Values */ @@ -74,14 +78,21 @@ #define ANOMALY_05000461 (1) /* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */ #define ANOMALY_05000462 (1) -/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +/* PLL Latches Incorrect Settings During Reset */ +#define ANOMALY_05000469 (1) +/* Incorrect Default MSEL Value in PLL_CTL */ +#define ANOMALY_05000472 (1) +/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */ #define ANOMALY_05000473 (1) /* TESTSET Instruction Cannot Be Interrupted */ #define ANOMALY_05000477 (1) +/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ +#define ANOMALY_05000481 (1) +/* IFLUSH sucks at life */ +#define ANOMALY_05000491 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) -#define ANOMALY_05000119 (0) #define ANOMALY_05000120 (0) #define ANOMALY_05000125 (0) #define ANOMALY_05000149 (0) @@ -94,6 +105,7 @@ #define ANOMALY_05000198 (0) #define ANOMALY_05000202 (0) #define ANOMALY_05000215 (0) +#define ANOMALY_05000219 (0) #define ANOMALY_05000220 (0) #define ANOMALY_05000227 (0) #define ANOMALY_05000230 (0) @@ -143,5 +155,6 @@ #define ANOMALY_05000467 (0) #define ANOMALY_05000474 (0) #define ANOMALY_05000475 (0) +#define ANOMALY_05000485 (0) #endif diff --git a/arch/blackfin/mach-bf518/include/mach/bf518.h b/arch/blackfin/mach-bf518/include/mach/bf518.h index 856b330ecf0b..6906dee4f4cc 100644 --- a/arch/blackfin/mach-bf518/include/mach/bf518.h +++ b/arch/blackfin/mach-bf518/include/mach/bf518.h @@ -85,6 +85,111 @@ #define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO) +/**************************** Hysteresis Settings ****************************/ + +#ifdef CONFIG_BFIN_HYSTERESIS_CONTROL +#ifdef CONFIG_GPIO_HYST_PORTF_0_7 +#define HYST_PORTF_0_7 (1 << 0) +#else +#define HYST_PORTF_0_7 (0 << 0) +#endif +#ifdef CONFIG_GPIO_HYST_PORTF_8_9 +#define HYST_PORTF_8_9 (1 << 2) +#else +#define HYST_PORTF_8_9 (0 << 2) +#endif +#ifdef CONFIG_GPIO_HYST_PORTF_10 +#define HYST_PORTF_10 (1 << 4) +#else +#define HYST_PORTF_10 (0 << 4) +#endif +#ifdef CONFIG_GPIO_HYST_PORTF_11 +#define HYST_PORTF_11 (1 << 6) +#else +#define HYST_PORTF_11 (0 << 6) +#endif +#ifdef CONFIG_GPIO_HYST_PORTF_12_13 +#define HYST_PORTF_12_13 (1 << 8) +#else +#define HYST_PORTF_12_13 (0 << 8) +#endif +#ifdef CONFIG_GPIO_HYST_PORTF_14_15 +#define HYST_PORTF_14_15 (1 << 10) +#else +#define HYST_PORTF_14_15 (0 << 10) +#endif + +#define HYST_PORTF_0_15 (HYST_PORTF_0_7 | HYST_PORTF_8_9 | HYST_PORTF_10 | \ + HYST_PORTF_11 | HYST_PORTF_12_13 | HYST_PORTF_14_15) + +#ifdef CONFIG_GPIO_HYST_PORTG_0 +#define HYST_PORTG_0 (1 << 0) +#else +#define HYST_PORTG_0 (0 << 0) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_1_4 +#define HYST_PORTG_1_4 (1 << 2) +#else +#define HYST_PORTG_1_4 (0 << 2) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_5_6 +#define HYST_PORTG_5_6 (1 << 4) +#else +#define HYST_PORTG_5_6 (0 << 4) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_7_8 +#define HYST_PORTG_7_8 (1 << 6) +#else +#define HYST_PORTG_7_8 (0 << 6) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_9 +#define HYST_PORTG_9 (1 << 8) +#else +#define HYST_PORTG_9 (0 << 8) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_10 +#define HYST_PORTG_10 (1 << 10) +#else +#define HYST_PORTG_10 (0 << 10) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_11_13 +#define HYST_PORTG_11_13 (1 << 12) +#else +#define HYST_PORTG_11_13 (0 << 12) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_14_15 +#define HYST_PORTG_14_15 (1 << 14) +#else +#define HYST_PORTG_14_15 (0 << 14) +#endif + +#define HYST_PORTG_0_15 (HYST_PORTG_0 | HYST_PORTG_1_4 | HYST_PORTG_5_6 | \ + HYST_PORTG_7_8 | HYST_PORTG_9 | HYST_PORTG_10 | \ + HYST_PORTG_11_13 | HYST_PORTG_14_15) + +#ifdef CONFIG_GPIO_HYST_PORTH_0_7 +#define HYST_PORTH_0_7 (1 << 0) +#else +#define HYST_PORTH_0_7 (0 << 0) +#endif + +#define HYST_PORTH_0_15 (HYST_PORTH_0_7) + +#ifdef CONFIG_NONEGPIO_HYST_NMI_RST_BMODE +#define HYST_NMI_RST_BMODE (1 << 2) +#else +#define HYST_NMI_RST_BMODE (0 << 2) +#endif +#ifdef CONFIG_NONEGPIO_HYST_JTAG +#define HYST_JTAG (1 << 4) +#else +#define HYST_JTAG (0 << 4) +#endif + +#define HYST_NONEGPIO (HYST_NMI_RST_BMODE | HYST_JTAG) +#define HYST_NONEGPIO_MASK (0x3C) +#endif /* CONFIG_BFIN_HYSTERESIS_CONTROL */ + #ifdef CONFIG_BF518 #define CPU "BF518" #define CPUID 0x27e8 diff --git a/arch/blackfin/mach-bf518/include/mach/defBF514.h b/arch/blackfin/mach-bf518/include/mach/defBF514.h index 92e950d6e996..98a51c479290 100644 --- a/arch/blackfin/mach-bf518/include/mach/defBF514.h +++ b/arch/blackfin/mach-bf518/include/mach/defBF514.h @@ -45,139 +45,4 @@ #define RSI_PID6 0xFFC03FF8 /* RSI Peripheral ID Register 6 */ #define RSI_PID7 0xFFC03FFC /* RSI Peripheral ID Register 7 */ -/* ********************************************************** */ -/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ -/* and MULTI BIT READ MACROS */ -/* ********************************************************** */ - -/* Bit masks for SDH_COMMAND */ - -#define CMD_IDX 0x3f /* Command Index */ -#define CMD_RSP 0x40 /* Response */ -#define CMD_L_RSP 0x80 /* Long Response */ -#define CMD_INT_E 0x100 /* Command Interrupt */ -#define CMD_PEND_E 0x200 /* Command Pending */ -#define CMD_E 0x400 /* Command Enable */ - -/* Bit masks for SDH_PWR_CTL */ - -#define PWR_ON 0x3 /* Power On */ -#if 0 -#define TBD 0x3c /* TBD */ -#endif -#define SD_CMD_OD 0x40 /* Open Drain Output */ -#define ROD_CTL 0x80 /* Rod Control */ - -/* Bit masks for SDH_CLK_CTL */ - -#define CLKDIV 0xff /* MC_CLK Divisor */ -#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */ -#define PWR_SV_E 0x200 /* Power Save Enable */ -#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */ -#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */ - -/* Bit masks for SDH_RESP_CMD */ - -#define RESP_CMD 0x3f /* Response Command */ - -/* Bit masks for SDH_DATA_CTL */ - -#define DTX_E 0x1 /* Data Transfer Enable */ -#define DTX_DIR 0x2 /* Data Transfer Direction */ -#define DTX_MODE 0x4 /* Data Transfer Mode */ -#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */ -#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */ - -/* Bit masks for SDH_STATUS */ - -#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ -#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ -#define CMD_TIME_OUT 0x4 /* CMD Time Out */ -#define DAT_TIME_OUT 0x8 /* Data Time Out */ -#define TX_UNDERRUN 0x10 /* Transmit Underrun */ -#define RX_OVERRUN 0x20 /* Receive Overrun */ -#define CMD_RESP_END 0x40 /* CMD Response End */ -#define CMD_SENT 0x80 /* CMD Sent */ -#define DAT_END 0x100 /* Data End */ -#define START_BIT_ERR 0x200 /* Start Bit Error */ -#define DAT_BLK_END 0x400 /* Data Block End */ -#define CMD_ACT 0x800 /* CMD Active */ -#define TX_ACT 0x1000 /* Transmit Active */ -#define RX_ACT 0x2000 /* Receive Active */ -#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */ -#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */ -#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */ -#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */ -#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */ -#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */ -#define TX_DAT_RDY 0x100000 /* Transmit Data Available */ -#define RX_FIFO_RDY 0x200000 /* Receive Data Available */ - -/* Bit masks for SDH_STATUS_CLR */ - -#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */ -#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */ -#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */ -#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */ -#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */ -#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */ -#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */ -#define CMD_SENT_STAT 0x80 /* CMD Sent Status */ -#define DAT_END_STAT 0x100 /* Data End Status */ -#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */ -#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */ - -/* Bit masks for SDH_MASK0 */ - -#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */ -#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */ -#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */ -#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */ -#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */ -#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */ -#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */ -#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */ -#define DAT_END_MASK 0x100 /* Data End Mask */ -#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */ -#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */ -#define CMD_ACT_MASK 0x800 /* CMD Active Mask */ -#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */ -#define RX_ACT_MASK 0x2000 /* Receive Active Mask */ -#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */ -#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */ -#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */ -#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */ -#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */ -#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */ -#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */ -#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */ - -/* Bit masks for SDH_FIFO_CNT */ - -#define FIFO_COUNT 0x7fff /* FIFO Count */ - -/* Bit masks for SDH_E_STATUS */ - -#define SDIO_INT_DET 0x2 /* SDIO Int Detected */ -#define SD_CARD_DET 0x10 /* SD Card Detect */ - -/* Bit masks for SDH_E_MASK */ - -#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */ -#define SCD_MSK 0x40 /* Mask Card Detect */ - -/* Bit masks for SDH_CFG */ - -#define CLKS_EN 0x1 /* Clocks Enable */ -#define SD4E 0x4 /* SDIO 4-Bit Enable */ -#define MWE 0x8 /* Moving Window Enable */ -#define SD_RST 0x10 /* SDMMC Reset */ -#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */ -#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */ -#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */ - -/* Bit masks for SDH_RD_WAIT_EN */ - -#define RWR 0x1 /* Read Wait Request */ - #endif /* _DEF_BF514_H */ diff --git a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h index 9241205fb992..2bc8f4f98011 100644 --- a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h +++ b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h @@ -458,22 +458,22 @@ /* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ #define TWI0_REGBASE 0xFFC01400 -#define TWI_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */ -#define TWI_CONTROL 0xFFC01404 /* TWI Control Register */ -#define TWI_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */ -#define TWI_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */ -#define TWI_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */ -#define TWI_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */ -#define TWI_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */ -#define TWI_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */ -#define TWI_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */ -#define TWI_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */ -#define TWI_FIFO_CTL 0xFFC01428 /* FIFO Control Register */ -#define TWI_FIFO_STAT 0xFFC0142C /* FIFO Status Register */ -#define TWI_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */ -#define TWI_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */ -#define TWI_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */ -#define TWI_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */ +#define TWI0_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */ +#define TWI0_CONTROL 0xFFC01404 /* TWI Control Register */ +#define TWI0_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */ +#define TWI0_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */ +#define TWI0_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */ +#define TWI0_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */ +#define TWI0_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */ +#define TWI0_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */ +#define TWI0_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */ +#define TWI0_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */ +#define TWI0_FIFO_CTL 0xFFC01428 /* FIFO Control Register */ +#define TWI0_FIFO_STAT 0xFFC0142C /* FIFO Status Register */ +#define TWI0_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */ +#define TWI0_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */ +#define TWI0_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */ +#define TWI0_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */ /* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */ @@ -1319,7 +1319,7 @@ #define TWI_ENA 0x0080 /* TWI Enable */ #define SCCB 0x0200 /* SCCB Compatibility Enable */ -/* TWI_SLAVE_CTRL Masks */ +/* TWI_SLAVE_CTL Masks */ #define SEN 0x0001 /* Slave Enable */ #define SADD_LEN 0x0002 /* Slave Address Length */ #define STDVAL 0x0004 /* Slave Transmit Data Valid */ @@ -1330,7 +1330,7 @@ #define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */ #define GCALL 0x0002 /* General Call Indicator */ -/* TWI_MASTER_CTRL Masks */ +/* TWI_MASTER_CTL Masks */ #define MEN 0x0001 /* Master Mode Enable */ #define MADD_LEN 0x0002 /* Master Address Length */ #define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */ @@ -1576,114 +1576,6 @@ #define HOST_COUNT_TIMEOUT 0x7ff /* Host Timeout count */ -/* Bit masks for CNT_CONFIG */ - -#define CNTE 0x1 /* Counter Enable */ -#define nCNTE 0x0 -#define DEBE 0x2 /* Debounce Enable */ -#define nDEBE 0x0 -#define CDGINV 0x10 /* CDG Pin Polarity Invert */ -#define nCDGINV 0x0 -#define CUDINV 0x20 /* CUD Pin Polarity Invert */ -#define nCUDINV 0x0 -#define CZMINV 0x40 /* CZM Pin Polarity Invert */ -#define nCZMINV 0x0 -#define CNTMODE 0x700 /* Counter Operating Mode */ -#define ZMZC 0x800 /* CZM Zeroes Counter Enable */ -#define nZMZC 0x0 -#define BNDMODE 0x3000 /* Boundary register Mode */ -#define INPDIS 0x8000 /* CUG and CDG Input Disable */ -#define nINPDIS 0x0 - -/* Bit masks for CNT_IMASK */ - -#define ICIE 0x1 /* Illegal Gray/Binary Code Interrupt Enable */ -#define nICIE 0x0 -#define UCIE 0x2 /* Up count Interrupt Enable */ -#define nUCIE 0x0 -#define DCIE 0x4 /* Down count Interrupt Enable */ -#define nDCIE 0x0 -#define MINCIE 0x8 /* Min Count Interrupt Enable */ -#define nMINCIE 0x0 -#define MAXCIE 0x10 /* Max Count Interrupt Enable */ -#define nMAXCIE 0x0 -#define COV31IE 0x20 /* Bit 31 Overflow Interrupt Enable */ -#define nCOV31IE 0x0 -#define COV15IE 0x40 /* Bit 15 Overflow Interrupt Enable */ -#define nCOV15IE 0x0 -#define CZEROIE 0x80 /* Count to Zero Interrupt Enable */ -#define nCZEROIE 0x0 -#define CZMIE 0x100 /* CZM Pin Interrupt Enable */ -#define nCZMIE 0x0 -#define CZMEIE 0x200 /* CZM Error Interrupt Enable */ -#define nCZMEIE 0x0 -#define CZMZIE 0x400 /* CZM Zeroes Counter Interrupt Enable */ -#define nCZMZIE 0x0 - -/* Bit masks for CNT_STATUS */ - -#define ICII 0x1 /* Illegal Gray/Binary Code Interrupt Identifier */ -#define nICII 0x0 -#define UCII 0x2 /* Up count Interrupt Identifier */ -#define nUCII 0x0 -#define DCII 0x4 /* Down count Interrupt Identifier */ -#define nDCII 0x0 -#define MINCII 0x8 /* Min Count Interrupt Identifier */ -#define nMINCII 0x0 -#define MAXCII 0x10 /* Max Count Interrupt Identifier */ -#define nMAXCII 0x0 -#define COV31II 0x20 /* Bit 31 Overflow Interrupt Identifier */ -#define nCOV31II 0x0 -#define COV15II 0x40 /* Bit 15 Overflow Interrupt Identifier */ -#define nCOV15II 0x0 -#define CZEROII 0x80 /* Count to Zero Interrupt Identifier */ -#define nCZEROII 0x0 -#define CZMII 0x100 /* CZM Pin Interrupt Identifier */ -#define nCZMII 0x0 -#define CZMEII 0x200 /* CZM Error Interrupt Identifier */ -#define nCZMEII 0x0 -#define CZMZII 0x400 /* CZM Zeroes Counter Interrupt Identifier */ -#define nCZMZII 0x0 - -/* Bit masks for CNT_COMMAND */ - -#define W1LCNT 0xf /* Load Counter Register */ -#define W1LMIN 0xf0 /* Load Min Register */ -#define W1LMAX 0xf00 /* Load Max Register */ -#define W1ZMONCE 0x1000 /* Enable CZM Clear Counter Once */ -#define nW1ZMONCE 0x0 - -/* Bit masks for CNT_DEBOUNCE */ - -#define DPRESCALE 0xf /* Load Counter Register */ - -/* CNT_COMMAND bit field options */ - -#define W1LCNT_ZERO 0x0001 /* write 1 to load CNT_COUNTER with zero */ -#define W1LCNT_MIN 0x0004 /* write 1 to load CNT_COUNTER from CNT_MIN */ -#define W1LCNT_MAX 0x0008 /* write 1 to load CNT_COUNTER from CNT_MAX */ - -#define W1LMIN_ZERO 0x0010 /* write 1 to load CNT_MIN with zero */ -#define W1LMIN_CNT 0x0020 /* write 1 to load CNT_MIN from CNT_COUNTER */ -#define W1LMIN_MAX 0x0080 /* write 1 to load CNT_MIN from CNT_MAX */ - -#define W1LMAX_ZERO 0x0100 /* write 1 to load CNT_MAX with zero */ -#define W1LMAX_CNT 0x0200 /* write 1 to load CNT_MAX from CNT_COUNTER */ -#define W1LMAX_MIN 0x0400 /* write 1 to load CNT_MAX from CNT_MIN */ - -/* CNT_CONFIG bit field options */ - -#define CNTMODE_QUADENC 0x0000 /* quadrature encoder mode */ -#define CNTMODE_BINENC 0x0100 /* binary encoder mode */ -#define CNTMODE_UDCNT 0x0200 /* up/down counter mode */ -#define CNTMODE_DIRCNT 0x0400 /* direction counter mode */ -#define CNTMODE_DIRTMR 0x0500 /* direction timer mode */ - -#define BNDMODE_COMP 0x0000 /* boundary compare mode */ -#define BNDMODE_ZERO 0x1000 /* boundary compare and zero mode */ -#define BNDMODE_CAPT 0x2000 /* boundary capture mode */ -#define BNDMODE_AEXT 0x3000 /* boundary auto-extend mode */ - /* Bit masks for SECURE_SYSSWT */ #define EMUDABL 0x1 /* Emulation Disable. */ diff --git a/arch/blackfin/mach-bf518/include/mach/gpio.h b/arch/blackfin/mach-bf518/include/mach/gpio.h index bbab2d76499c..9af6ce0f6321 100644 --- a/arch/blackfin/mach-bf518/include/mach/gpio.h +++ b/arch/blackfin/mach-bf518/include/mach/gpio.h @@ -7,48 +7,49 @@ #ifndef _MACH_GPIO_H_ #define _MACH_GPIO_H_ -#define MAX_BLACKFIN_GPIOS 40 +#define MAX_BLACKFIN_GPIOS 41 -#define GPIO_PF0 0 -#define GPIO_PF1 1 -#define GPIO_PF2 2 -#define GPIO_PF3 3 -#define GPIO_PF4 4 -#define GPIO_PF5 5 -#define GPIO_PF6 6 -#define GPIO_PF7 7 -#define GPIO_PF8 8 -#define GPIO_PF9 9 -#define GPIO_PF10 10 -#define GPIO_PF11 11 -#define GPIO_PF12 12 -#define GPIO_PF13 13 -#define GPIO_PF14 14 -#define GPIO_PF15 15 -#define GPIO_PG0 16 -#define GPIO_PG1 17 -#define GPIO_PG2 18 -#define GPIO_PG3 19 -#define GPIO_PG4 20 -#define GPIO_PG5 21 -#define GPIO_PG6 22 -#define GPIO_PG7 23 -#define GPIO_PG8 24 -#define GPIO_PG9 25 -#define GPIO_PG10 26 -#define GPIO_PG11 27 -#define GPIO_PG12 28 -#define GPIO_PG13 29 -#define GPIO_PG14 30 -#define GPIO_PG15 31 -#define GPIO_PH0 32 -#define GPIO_PH1 33 -#define GPIO_PH2 34 -#define GPIO_PH3 35 -#define GPIO_PH4 36 -#define GPIO_PH5 37 -#define GPIO_PH6 38 -#define GPIO_PH7 39 +#define GPIO_PF0 0 +#define GPIO_PF1 1 +#define GPIO_PF2 2 +#define GPIO_PF3 3 +#define GPIO_PF4 4 +#define GPIO_PF5 5 +#define GPIO_PF6 6 +#define GPIO_PF7 7 +#define GPIO_PF8 8 +#define GPIO_PF9 9 +#define GPIO_PF10 10 +#define GPIO_PF11 11 +#define GPIO_PF12 12 +#define GPIO_PF13 13 +#define GPIO_PF14 14 +#define GPIO_PF15 15 +#define GPIO_PG0 16 +#define GPIO_PG1 17 +#define GPIO_PG2 18 +#define GPIO_PG3 19 +#define GPIO_PG4 20 +#define GPIO_PG5 21 +#define GPIO_PG6 22 +#define GPIO_PG7 23 +#define GPIO_PG8 24 +#define GPIO_PG9 25 +#define GPIO_PG10 26 +#define GPIO_PG11 27 +#define GPIO_PG12 28 +#define GPIO_PG13 29 +#define GPIO_PG14 30 +#define GPIO_PG15 31 +#define GPIO_PH0 32 +#define GPIO_PH1 33 +#define GPIO_PH2 34 +#define GPIO_PH3 35 +#define GPIO_PH4 36 +#define GPIO_PH5 37 +#define GPIO_PH6 38 +#define GPIO_PH7 39 +#define GPIO_PH8 40 #define PORT_F GPIO_PF0 #define PORT_G GPIO_PG0 diff --git a/arch/blackfin/mach-bf518/include/mach/portmux.h b/arch/blackfin/mach-bf518/include/mach/portmux.h index e352910f7f99..cd84a569b04e 100644 --- a/arch/blackfin/mach-bf518/include/mach/portmux.h +++ b/arch/blackfin/mach-bf518/include/mach/portmux.h @@ -7,7 +7,7 @@ #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ -#define MAX_RESOURCES MAX_BLACKFIN_GPIOS +#define MAX_RESOURCES MAX_BLACKFIN_GPIOS /* EMAC MII/RMII Port Mux */ #define P_MII0_ETxD2 (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0)) @@ -95,7 +95,7 @@ #define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(0)) #define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0)) #define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(2)) -#define P_SPI0_SSEL4 (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(2)) +#define P_SPI0_SSEL4 (P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(2)) #define P_SPI0_SSEL5 (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(2)) #define P_SPI1_SS (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(1)) @@ -109,6 +109,7 @@ #define P_SPI1_SSEL4 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(2)) #define P_SPI1_SSEL5 (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(2)) +#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PG15 #define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2 /* SPORT Port Mux */ @@ -195,6 +196,6 @@ #define P_AMS2 (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1)) #define P_AMS3 (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(2)) -#define P_HWAIT (P_DEFINED | P_IDENT(GPIO_PG000000000) | P_FUNCT(1)) +#define P_HWAIT (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(1)) #endif /* _MACH_PORTMUX_H_ */ diff --git a/arch/blackfin/mach-bf527/Kconfig b/arch/blackfin/mach-bf527/Kconfig index 1f8cbe9d6b9a..0ba54701af0b 100644 --- a/arch/blackfin/mach-bf527/Kconfig +++ b/arch/blackfin/mach-bf527/Kconfig @@ -79,6 +79,72 @@ config BF527_NAND_D_PORTH PORT H endchoice +comment "Hysteresis/Schmitt Trigger Control" +config BFIN_HYSTERESIS_CONTROL + bool "Enable Hysteresis Control" + help + The ADSP-BF52x allows to control input hysteresis for Port F, + Port G and Port H and other processor signal inputs. + The Schmitt trigger enables can be set only for pin groups. + Saying Y will overwrite the default reset or boot loader + initialization. + +menu "PORT F" + depends on BFIN_HYSTERESIS_CONTROL +config GPIO_HYST_PORTF_0_7 + bool "Enable Hysteresis on PORTF {0...7}" +config GPIO_HYST_PORTF_8_9 + bool "Enable Hysteresis on PORTF {8, 9}" +config GPIO_HYST_PORTF_10 + bool "Enable Hysteresis on PORTF 10" +config GPIO_HYST_PORTF_11 + bool "Enable Hysteresis on PORTF 11" +config GPIO_HYST_PORTF_12_13 + bool "Enable Hysteresis on PORTF {12, 13}" +config GPIO_HYST_PORTF_14_15 + bool "Enable Hysteresis on PORTF {14, 15}" +endmenu + +menu "PORT G" + depends on BFIN_HYSTERESIS_CONTROL +config GPIO_HYST_PORTG_0 + bool "Enable Hysteresis on PORTG 0" +config GPIO_HYST_PORTG_1_4 + bool "Enable Hysteresis on PORTG {1...4}" +config GPIO_HYST_PORTG_5_6 + bool "Enable Hysteresis on PORTG {5, 6}" +config GPIO_HYST_PORTG_7_8 + bool "Enable Hysteresis on PORTG {7, 8}" +config GPIO_HYST_PORTG_9 + bool "Enable Hysteresis on PORTG 9" +config GPIO_HYST_PORTG_10 + bool "Enable Hysteresis on PORTG 10" +config GPIO_HYST_PORTG_11_13 + bool "Enable Hysteresis on PORTG {11...13}" +config GPIO_HYST_PORTG_14_15 + bool "Enable Hysteresis on PORTG {14, 15}" +endmenu + +menu "PORT H" + depends on BFIN_HYSTERESIS_CONTROL +config GPIO_HYST_PORTH_0_7 + bool "Enable Hysteresis on PORTH {0...7}" +config GPIO_HYST_PORTH_8 + bool "Enable Hysteresis on PORTH 8" +config GPIO_HYST_PORTH_9_15 + bool "Enable Hysteresis on PORTH {9...15}" +endmenu + +menu "None-GPIO" + depends on BFIN_HYSTERESIS_CONTROL +config NONEGPIO_HYST_TMR0_FS1_PPICLK + bool "Enable Hysteresis on {TMR0, PPI_FS1, PPI_CLK}" +config NONEGPIO_HYST_NMI_RST_BMODE + bool "Enable Hysteresis on {NMI, RESET, BMODE}" +config NONEGPIO_HYST_JTAG + bool "Enable Hysteresis on JTAG" +endmenu + comment "Interrupt Priority Assignment" menu "Priority" diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h index 02040df8ec80..9358afa05c90 100644 --- a/arch/blackfin/mach-bf527/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h @@ -5,13 +5,13 @@ * and can be replaced with that version at any time * DO NOT EDIT THIS FILE * - * Copyright 2004-2009 Analog Devices Inc. + * Copyright 2004-2010 Analog Devices Inc. * Licensed under the ADI BSD license. * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: - * - Revision D, 08/14/2009; ADSP-BF526 Blackfin Processor Anomaly List + * - Revision E, 03/15/2010; ADSP-BF526 Blackfin Processor Anomaly List * - Revision G, 08/25/2009; ADSP-BF527 Blackfin Processor Anomaly List */ @@ -41,7 +41,7 @@ /* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ #define ANOMALY_05000074 (1) /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ -#define ANOMALY_05000119 (1) /* note: brokenness is noted in documentation, not anomaly sheet */ +#define ANOMALY_05000119 (1) /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) /* False Hardware Error from an Access in the Shadow of a Conditional Branch */ @@ -168,6 +168,8 @@ #define ANOMALY_05000431 (1) /* bfrom_SysControl() Does Not Clear SIC_IWR1 Before Executing PLL Programming Sequence */ #define ANOMALY_05000432 (_ANOMALY_BF526(< 1)) +/* SW Breakpoints Ignored Upon Return From Lockbox Authentication */ +#define ANOMALY_05000434 (1) /* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */ #define ANOMALY_05000435 (_ANOMALY_BF526_BF527(< 1, >= 0)) /* Preboot Cannot be Used to Alter the PLL_DIV Register */ @@ -204,10 +206,22 @@ #define ANOMALY_05000467 (1) /* PLL Latches Incorrect Settings During Reset */ #define ANOMALY_05000469 (1) +/* Incorrect Default MSEL Value in PLL_CTL */ +#define ANOMALY_05000472 (_ANOMALY_BF526(>= 0)) /* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ #define ANOMALY_05000473 (1) +/* Possible Lockup Condition whem Modifying PLL from External Memory */ +#define ANOMALY_05000475 (1) /* TESTSET Instruction Cannot Be Interrupted */ #define ANOMALY_05000477 (1) +/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ +#define ANOMALY_05000481 (1) +/* Possible USB Data Corruption When Multiple Endpoints Are Accessed by the Core */ +#define ANOMALY_05000483 (1) +/* PLL_CTL Change Using bfrom_SysControl() Can Result in Processor Overclocking */ +#define ANOMALY_05000485 (_ANOMALY_BF526_BF527(< 2, < 3)) +/* IFLUSH sucks at life */ +#define ANOMALY_05000491 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -223,6 +237,7 @@ #define ANOMALY_05000198 (0) #define ANOMALY_05000202 (0) #define ANOMALY_05000215 (0) +#define ANOMALY_05000219 (0) #define ANOMALY_05000220 (0) #define ANOMALY_05000227 (0) #define ANOMALY_05000230 (0) @@ -259,6 +274,5 @@ #define ANOMALY_05000447 (0) #define ANOMALY_05000448 (0) #define ANOMALY_05000474 (0) -#define ANOMALY_05000475 (0) #endif diff --git a/arch/blackfin/mach-bf527/include/mach/bf527.h b/arch/blackfin/mach-bf527/include/mach/bf527.h index ff68c8897087..8ff155b34f64 100644 --- a/arch/blackfin/mach-bf527/include/mach/bf527.h +++ b/arch/blackfin/mach-bf527/include/mach/bf527.h @@ -85,6 +85,126 @@ #define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO) +/**************************** Hysteresis Settings ****************************/ + +#ifdef CONFIG_BFIN_HYSTERESIS_CONTROL +#ifdef CONFIG_GPIO_HYST_PORTF_0_7 +#define HYST_PORTF_0_7 (1 << 0) +#else +#define HYST_PORTF_0_7 (0 << 0) +#endif +#ifdef CONFIG_GPIO_HYST_PORTF_8_9 +#define HYST_PORTF_8_9 (1 << 2) +#else +#define HYST_PORTF_8_9 (0 << 2) +#endif +#ifdef CONFIG_GPIO_HYST_PORTF_10 +#define HYST_PORTF_10 (1 << 4) +#else +#define HYST_PORTF_10 (0 << 4) +#endif +#ifdef CONFIG_GPIO_HYST_PORTF_11 +#define HYST_PORTF_11 (1 << 6) +#else +#define HYST_PORTF_11 (0 << 6) +#endif +#ifdef CONFIG_GPIO_HYST_PORTF_12_13 +#define HYST_PORTF_12_13 (1 << 8) +#else +#define HYST_PORTF_12_13 (0 << 8) +#endif +#ifdef CONFIG_GPIO_HYST_PORTF_14_15 +#define HYST_PORTF_14_15 (1 << 10) +#else +#define HYST_PORTF_14_15 (0 << 10) +#endif + +#define HYST_PORTF_0_15 (HYST_PORTF_0_7 | HYST_PORTF_8_9 | HYST_PORTF_10 | \ + HYST_PORTF_11 | HYST_PORTF_12_13 | HYST_PORTF_14_15) + +#ifdef CONFIG_GPIO_HYST_PORTG_0 +#define HYST_PORTG_0 (1 << 0) +#else +#define HYST_PORTG_0 (0 << 0) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_1_4 +#define HYST_PORTG_1_4 (1 << 2) +#else +#define HYST_PORTG_1_4 (0 << 2) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_5_6 +#define HYST_PORTG_5_6 (1 << 4) +#else +#define HYST_PORTG_5_6 (0 << 4) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_7_8 +#define HYST_PORTG_7_8 (1 << 6) +#else +#define HYST_PORTG_7_8 (0 << 6) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_9 +#define HYST_PORTG_9 (1 << 8) +#else +#define HYST_PORTG_9 (0 << 8) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_10 +#define HYST_PORTG_10 (1 << 10) +#else +#define HYST_PORTG_10 (0 << 10) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_11_13 +#define HYST_PORTG_11_13 (1 << 12) +#else +#define HYST_PORTG_11_13 (0 << 12) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_14_15 +#define HYST_PORTG_14_15 (1 << 14) +#else +#define HYST_PORTG_14_15 (0 << 14) +#endif + +#define HYST_PORTG_0_15 (HYST_PORTG_0 | HYST_PORTG_1_4 | HYST_PORTG_5_6 | \ + HYST_PORTG_7_8 | HYST_PORTG_9 | HYST_PORTG_10 | \ + HYST_PORTG_11_13 | HYST_PORTG_14_15) + +#ifdef CONFIG_GPIO_HYST_PORTH_0_7 +#define HYST_PORTH_0_7 (1 << 0) +#else +#define HYST_PORTH_0_7 (0 << 0) +#endif +#ifdef CONFIG_GPIO_HYST_PORTH_8 +#define HYST_PORTH_8 (1 << 2) +#else +#define HYST_PORTH_8 (0 << 2) +#endif +#ifdef CONFIG_GPIO_HYST_PORTH_9_15 +#define HYST_PORTH_9_15 (1 << 4) +#else +#define HYST_PORTH_9_15 (0 << 4) +#endif + +#define HYST_PORTH_0_15 (HYST_PORTH_0_7 | HYST_PORTH_8 | HYST_PORTH_9_15) + +#ifdef CONFIG_NONEGPIO_HYST_TMR0_FS1_PPICLK +#define HYST_TMR0_FS1_PPICLK (1 << 0) +#else +#define HYST_TMR0_FS1_PPICLK (0 << 0) +#endif +#ifdef CONFIG_NONEGPIO_HYST_NMI_RST_BMODE +#define HYST_NMI_RST_BMODE (1 << 2) +#else +#define HYST_NMI_RST_BMODE (0 << 2) +#endif +#ifdef CONFIG_NONEGPIO_HYST_JTAG +#define HYST_JTAG (1 << 4) +#else +#define HYST_JTAG (0 << 4) +#endif + +#define HYST_NONEGPIO (HYST_TMR0_FS1_PPICLK | HYST_NMI_RST_BMODE | HYST_JTAG) +#define HYST_NONEGPIO_MASK (0x3F) +#endif /* CONFIG_BFIN_HYSTERESIS_CONTROL */ + #ifdef CONFIG_BF527 #define CPU "BF527" #define CPUID 0x27e0 diff --git a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h index 8b18b5359210..5f97f01fcda6 100644 --- a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h +++ b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h @@ -458,22 +458,22 @@ /* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ #define TWI0_REGBASE 0xFFC01400 -#define TWI_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */ -#define TWI_CONTROL 0xFFC01404 /* TWI Control Register */ -#define TWI_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */ -#define TWI_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */ -#define TWI_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */ -#define TWI_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */ -#define TWI_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */ -#define TWI_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */ -#define TWI_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */ -#define TWI_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */ -#define TWI_FIFO_CTL 0xFFC01428 /* FIFO Control Register */ -#define TWI_FIFO_STAT 0xFFC0142C /* FIFO Status Register */ -#define TWI_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */ -#define TWI_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */ -#define TWI_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */ -#define TWI_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */ +#define TWI0_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */ +#define TWI0_CONTROL 0xFFC01404 /* TWI Control Register */ +#define TWI0_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */ +#define TWI0_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */ +#define TWI0_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */ +#define TWI0_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */ +#define TWI0_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */ +#define TWI0_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */ +#define TWI0_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */ +#define TWI0_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */ +#define TWI0_FIFO_CTL 0xFFC01428 /* FIFO Control Register */ +#define TWI0_FIFO_STAT 0xFFC0142C /* FIFO Status Register */ +#define TWI0_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */ +#define TWI0_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */ +#define TWI0_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */ +#define TWI0_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */ /* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */ @@ -1328,7 +1328,7 @@ #define TWI_ENA 0x0080 /* TWI Enable */ #define SCCB 0x0200 /* SCCB Compatibility Enable */ -/* TWI_SLAVE_CTRL Masks */ +/* TWI_SLAVE_CTL Masks */ #define SEN 0x0001 /* Slave Enable */ #define SADD_LEN 0x0002 /* Slave Address Length */ #define STDVAL 0x0004 /* Slave Transmit Data Valid */ @@ -1339,7 +1339,7 @@ #define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */ #define GCALL 0x0002 /* General Call Indicator */ -/* TWI_MASTER_CTRL Masks */ +/* TWI_MASTER_CTL Masks */ #define MEN 0x0001 /* Master Mode Enable */ #define MADD_LEN 0x0002 /* Master Address Length */ #define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */ @@ -1589,114 +1589,6 @@ #define HOST_COUNT_TIMEOUT 0x7ff /* Host Timeout count */ -/* Bit masks for CNT_CONFIG */ - -#define CNTE 0x1 /* Counter Enable */ -#define nCNTE 0x0 -#define DEBE 0x2 /* Debounce Enable */ -#define nDEBE 0x0 -#define CDGINV 0x10 /* CDG Pin Polarity Invert */ -#define nCDGINV 0x0 -#define CUDINV 0x20 /* CUD Pin Polarity Invert */ -#define nCUDINV 0x0 -#define CZMINV 0x40 /* CZM Pin Polarity Invert */ -#define nCZMINV 0x0 -#define CNTMODE 0x700 /* Counter Operating Mode */ -#define ZMZC 0x800 /* CZM Zeroes Counter Enable */ -#define nZMZC 0x0 -#define BNDMODE 0x3000 /* Boundary register Mode */ -#define INPDIS 0x8000 /* CUG and CDG Input Disable */ -#define nINPDIS 0x0 - -/* Bit masks for CNT_IMASK */ - -#define ICIE 0x1 /* Illegal Gray/Binary Code Interrupt Enable */ -#define nICIE 0x0 -#define UCIE 0x2 /* Up count Interrupt Enable */ -#define nUCIE 0x0 -#define DCIE 0x4 /* Down count Interrupt Enable */ -#define nDCIE 0x0 -#define MINCIE 0x8 /* Min Count Interrupt Enable */ -#define nMINCIE 0x0 -#define MAXCIE 0x10 /* Max Count Interrupt Enable */ -#define nMAXCIE 0x0 -#define COV31IE 0x20 /* Bit 31 Overflow Interrupt Enable */ -#define nCOV31IE 0x0 -#define COV15IE 0x40 /* Bit 15 Overflow Interrupt Enable */ -#define nCOV15IE 0x0 -#define CZEROIE 0x80 /* Count to Zero Interrupt Enable */ -#define nCZEROIE 0x0 -#define CZMIE 0x100 /* CZM Pin Interrupt Enable */ -#define nCZMIE 0x0 -#define CZMEIE 0x200 /* CZM Error Interrupt Enable */ -#define nCZMEIE 0x0 -#define CZMZIE 0x400 /* CZM Zeroes Counter Interrupt Enable */ -#define nCZMZIE 0x0 - -/* Bit masks for CNT_STATUS */ - -#define ICII 0x1 /* Illegal Gray/Binary Code Interrupt Identifier */ -#define nICII 0x0 -#define UCII 0x2 /* Up count Interrupt Identifier */ -#define nUCII 0x0 -#define DCII 0x4 /* Down count Interrupt Identifier */ -#define nDCII 0x0 -#define MINCII 0x8 /* Min Count Interrupt Identifier */ -#define nMINCII 0x0 -#define MAXCII 0x10 /* Max Count Interrupt Identifier */ -#define nMAXCII 0x0 -#define COV31II 0x20 /* Bit 31 Overflow Interrupt Identifier */ -#define nCOV31II 0x0 -#define COV15II 0x40 /* Bit 15 Overflow Interrupt Identifier */ -#define nCOV15II 0x0 -#define CZEROII 0x80 /* Count to Zero Interrupt Identifier */ -#define nCZEROII 0x0 -#define CZMII 0x100 /* CZM Pin Interrupt Identifier */ -#define nCZMII 0x0 -#define CZMEII 0x200 /* CZM Error Interrupt Identifier */ -#define nCZMEII 0x0 -#define CZMZII 0x400 /* CZM Zeroes Counter Interrupt Identifier */ -#define nCZMZII 0x0 - -/* Bit masks for CNT_COMMAND */ - -#define W1LCNT 0xf /* Load Counter Register */ -#define W1LMIN 0xf0 /* Load Min Register */ -#define W1LMAX 0xf00 /* Load Max Register */ -#define W1ZMONCE 0x1000 /* Enable CZM Clear Counter Once */ -#define nW1ZMONCE 0x0 - -/* Bit masks for CNT_DEBOUNCE */ - -#define DPRESCALE 0xf /* Load Counter Register */ - -/* CNT_COMMAND bit field options */ - -#define W1LCNT_ZERO 0x0001 /* write 1 to load CNT_COUNTER with zero */ -#define W1LCNT_MIN 0x0004 /* write 1 to load CNT_COUNTER from CNT_MIN */ -#define W1LCNT_MAX 0x0008 /* write 1 to load CNT_COUNTER from CNT_MAX */ - -#define W1LMIN_ZERO 0x0010 /* write 1 to load CNT_MIN with zero */ -#define W1LMIN_CNT 0x0020 /* write 1 to load CNT_MIN from CNT_COUNTER */ -#define W1LMIN_MAX 0x0080 /* write 1 to load CNT_MIN from CNT_MAX */ - -#define W1LMAX_ZERO 0x0100 /* write 1 to load CNT_MAX with zero */ -#define W1LMAX_CNT 0x0200 /* write 1 to load CNT_MAX from CNT_COUNTER */ -#define W1LMAX_MIN 0x0400 /* write 1 to load CNT_MAX from CNT_MIN */ - -/* CNT_CONFIG bit field options */ - -#define CNTMODE_QUADENC 0x0000 /* quadrature encoder mode */ -#define CNTMODE_BINENC 0x0100 /* binary encoder mode */ -#define CNTMODE_UDCNT 0x0200 /* up/down counter mode */ -#define CNTMODE_DIRCNT 0x0400 /* direction counter mode */ -#define CNTMODE_DIRTMR 0x0500 /* direction timer mode */ - -#define BNDMODE_COMP 0x0000 /* boundary compare mode */ -#define BNDMODE_ZERO 0x1000 /* boundary compare and zero mode */ -#define BNDMODE_CAPT 0x2000 /* boundary capture mode */ -#define BNDMODE_AEXT 0x3000 /* boundary auto-extend mode */ - /* Bit masks for SECURE_SYSSWT */ #define EMUDABL 0x1 /* Emulation Disable. */ @@ -1738,85 +1630,4 @@ #define nAFEXIT 0x0 #define SECSTAT 0xe0 /* Secure Status */ -/* Bit masks for NFC_CTL */ - -#define WR_DLY 0xf /* Write Strobe Delay */ -#define RD_DLY 0xf0 /* Read Strobe Delay */ -#define NWIDTH 0x100 /* NAND Data Width */ -#define nNWIDTH 0x0 -#define PG_SIZE 0x200 /* Page Size */ -#define nPG_SIZE 0x0 - -/* Bit masks for NFC_STAT */ - -#define NBUSY 0x1 /* Not Busy */ -#define nNBUSY 0x0 -#define WB_FULL 0x2 /* Write Buffer Full */ -#define nWB_FULL 0x0 -#define PG_WR_STAT 0x4 /* Page Write Pending */ -#define nPG_WR_STAT 0x0 -#define PG_RD_STAT 0x8 /* Page Read Pending */ -#define nPG_RD_STAT 0x0 -#define WB_EMPTY 0x10 /* Write Buffer Empty */ -#define nWB_EMPTY 0x0 - -/* Bit masks for NFC_IRQSTAT */ - -#define NBUSYIRQ 0x1 /* Not Busy IRQ */ -#define nNBUSYIRQ 0x0 -#define WB_OVF 0x2 /* Write Buffer Overflow */ -#define nWB_OVF 0x0 -#define WB_EDGE 0x4 /* Write Buffer Edge Detect */ -#define nWB_EDGE 0x0 -#define RD_RDY 0x8 /* Read Data Ready */ -#define nRD_RDY 0x0 -#define WR_DONE 0x10 /* Page Write Done */ -#define nWR_DONE 0x0 - -/* Bit masks for NFC_IRQMASK */ - -#define MASK_BUSYIRQ 0x1 /* Mask Not Busy IRQ */ -#define nMASK_BUSYIRQ 0x0 -#define MASK_WBOVF 0x2 /* Mask Write Buffer Overflow */ -#define nMASK_WBOVF 0x0 -#define MASK_WBEMPTY 0x4 /* Mask Write Buffer Empty */ -#define nMASK_WBEMPTY 0x0 -#define MASK_RDRDY 0x8 /* Mask Read Data Ready */ -#define nMASK_RDRDY 0x0 -#define MASK_WRDONE 0x10 /* Mask Write Done */ -#define nMASK_WRDONE 0x0 - -/* Bit masks for NFC_RST */ - -#define ECC_RST 0x1 /* ECC (and NFC counters) Reset */ -#define nECC_RST 0x0 - -/* Bit masks for NFC_PGCTL */ - -#define PG_RD_START 0x1 /* Page Read Start */ -#define nPG_RD_START 0x0 -#define PG_WR_START 0x2 /* Page Write Start */ -#define nPG_WR_START 0x0 - -/* Bit masks for NFC_ECC0 */ - -#define ECC0 0x7ff /* Parity Calculation Result0 */ - -/* Bit masks for NFC_ECC1 */ - -#define ECC1 0x7ff /* Parity Calculation Result1 */ - -/* Bit masks for NFC_ECC2 */ - -#define ECC2 0x7ff /* Parity Calculation Result2 */ - -/* Bit masks for NFC_ECC3 */ - -#define ECC3 0x7ff /* Parity Calculation Result3 */ - -/* Bit masks for NFC_COUNT */ - -#define ECCCNT 0x3ff /* Transfer Count */ - - #endif /* _DEF_BF52X_H */ diff --git a/arch/blackfin/mach-bf527/include/mach/gpio.h b/arch/blackfin/mach-bf527/include/mach/gpio.h index 104bff85290d..f80c2995efdb 100644 --- a/arch/blackfin/mach-bf527/include/mach/gpio.h +++ b/arch/blackfin/mach-bf527/include/mach/gpio.h @@ -9,54 +9,54 @@ #define MAX_BLACKFIN_GPIOS 48 -#define GPIO_PF0 0 -#define GPIO_PF1 1 -#define GPIO_PF2 2 -#define GPIO_PF3 3 -#define GPIO_PF4 4 -#define GPIO_PF5 5 -#define GPIO_PF6 6 -#define GPIO_PF7 7 -#define GPIO_PF8 8 -#define GPIO_PF9 9 -#define GPIO_PF10 10 -#define GPIO_PF11 11 -#define GPIO_PF12 12 -#define GPIO_PF13 13 -#define GPIO_PF14 14 -#define GPIO_PF15 15 -#define GPIO_PG0 16 -#define GPIO_PG1 17 -#define GPIO_PG2 18 -#define GPIO_PG3 19 -#define GPIO_PG4 20 -#define GPIO_PG5 21 -#define GPIO_PG6 22 -#define GPIO_PG7 23 -#define GPIO_PG8 24 -#define GPIO_PG9 25 -#define GPIO_PG10 26 -#define GPIO_PG11 27 -#define GPIO_PG12 28 -#define GPIO_PG13 29 -#define GPIO_PG14 30 -#define GPIO_PG15 31 -#define GPIO_PH0 32 -#define GPIO_PH1 33 -#define GPIO_PH2 34 -#define GPIO_PH3 35 -#define GPIO_PH4 36 -#define GPIO_PH5 37 -#define GPIO_PH6 38 -#define GPIO_PH7 39 -#define GPIO_PH8 40 -#define GPIO_PH9 41 -#define GPIO_PH10 42 -#define GPIO_PH11 43 -#define GPIO_PH12 44 -#define GPIO_PH13 45 -#define GPIO_PH14 46 -#define GPIO_PH15 47 +#define GPIO_PF0 0 +#define GPIO_PF1 1 +#define GPIO_PF2 2 +#define GPIO_PF3 3 +#define GPIO_PF4 4 +#define GPIO_PF5 5 +#define GPIO_PF6 6 +#define GPIO_PF7 7 +#define GPIO_PF8 8 +#define GPIO_PF9 9 +#define GPIO_PF10 10 +#define GPIO_PF11 11 +#define GPIO_PF12 12 +#define GPIO_PF13 13 +#define GPIO_PF14 14 +#define GPIO_PF15 15 +#define GPIO_PG0 16 +#define GPIO_PG1 17 +#define GPIO_PG2 18 +#define GPIO_PG3 19 +#define GPIO_PG4 20 +#define GPIO_PG5 21 +#define GPIO_PG6 22 +#define GPIO_PG7 23 +#define GPIO_PG8 24 +#define GPIO_PG9 25 +#define GPIO_PG10 26 +#define GPIO_PG11 27 +#define GPIO_PG12 28 +#define GPIO_PG13 29 +#define GPIO_PG14 30 +#define GPIO_PG15 31 +#define GPIO_PH0 32 +#define GPIO_PH1 33 +#define GPIO_PH2 34 +#define GPIO_PH3 35 +#define GPIO_PH4 36 +#define GPIO_PH5 37 +#define GPIO_PH6 38 +#define GPIO_PH7 39 +#define GPIO_PH8 40 +#define GPIO_PH9 41 +#define GPIO_PH10 42 +#define GPIO_PH11 43 +#define GPIO_PH12 44 +#define GPIO_PH13 45 +#define GPIO_PH14 46 +#define GPIO_PH15 47 #define PORT_F GPIO_PF0 #define PORT_G GPIO_PG0 diff --git a/arch/blackfin/mach-bf527/include/mach/portmux.h b/arch/blackfin/mach-bf527/include/mach/portmux.h index d4518b6f4adf..08bae421f5c9 100644 --- a/arch/blackfin/mach-bf527/include/mach/portmux.h +++ b/arch/blackfin/mach-bf527/include/mach/portmux.h @@ -7,7 +7,7 @@ #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ -#define MAX_RESOURCES MAX_BLACKFIN_GPIOS +#define MAX_RESOURCES MAX_BLACKFIN_GPIOS #define P_PPI0_D0 (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0)) #define P_PPI0_D1 (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0)) @@ -79,6 +79,7 @@ #define P_HWAIT (P_DONTCARE) +#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PG1 #define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1 #define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0)) diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h index 9b3f7a27714d..78f872187918 100644 --- a/arch/blackfin/mach-bf533/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h @@ -5,7 +5,7 @@ * and can be replaced with that version at any time * DO NOT EDIT THIS FILE * - * Copyright 2004-2009 Analog Devices Inc. + * Copyright 2004-2010 Analog Devices Inc. * Licensed under the ADI BSD license. * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ @@ -208,8 +208,14 @@ #define ANOMALY_05000461 (1) /* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ #define ANOMALY_05000473 (1) +/* Possible Lockup Condition whem Modifying PLL from External Memory */ +#define ANOMALY_05000475 (1) /* TESTSET Instruction Cannot Be Interrupted */ #define ANOMALY_05000477 (1) +/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ +#define ANOMALY_05000481 (1) +/* IFLUSH sucks at life */ +#define ANOMALY_05000491 (1) /* These anomalies have been "phased" out of analog.com anomaly sheets and are * here to show running on older silicon just isn't feasible. @@ -358,6 +364,6 @@ #define ANOMALY_05000465 (0) #define ANOMALY_05000467 (0) #define ANOMALY_05000474 (0) -#define ANOMALY_05000475 (0) +#define ANOMALY_05000485 (0) #endif diff --git a/arch/blackfin/mach-bf533/include/mach/gpio.h b/arch/blackfin/mach-bf533/include/mach/gpio.h index 2af19d69a7a7..e02416db4b00 100644 --- a/arch/blackfin/mach-bf533/include/mach/gpio.h +++ b/arch/blackfin/mach-bf533/include/mach/gpio.h @@ -9,22 +9,22 @@ #define MAX_BLACKFIN_GPIOS 16 -#define GPIO_PF0 0 -#define GPIO_PF1 1 -#define GPIO_PF2 2 -#define GPIO_PF3 3 -#define GPIO_PF4 4 -#define GPIO_PF5 5 -#define GPIO_PF6 6 -#define GPIO_PF7 7 -#define GPIO_PF8 8 -#define GPIO_PF9 9 -#define GPIO_PF10 10 -#define GPIO_PF11 11 -#define GPIO_PF12 12 -#define GPIO_PF13 13 -#define GPIO_PF14 14 -#define GPIO_PF15 15 +#define GPIO_PF0 0 +#define GPIO_PF1 1 +#define GPIO_PF2 2 +#define GPIO_PF3 3 +#define GPIO_PF4 4 +#define GPIO_PF5 5 +#define GPIO_PF6 6 +#define GPIO_PF7 7 +#define GPIO_PF8 8 +#define GPIO_PF9 9 +#define GPIO_PF10 10 +#define GPIO_PF11 11 +#define GPIO_PF12 12 +#define GPIO_PF13 13 +#define GPIO_PF14 14 +#define GPIO_PF15 15 #define PORT_F GPIO_PF0 diff --git a/arch/blackfin/mach-bf533/include/mach/portmux.h b/arch/blackfin/mach-bf533/include/mach/portmux.h index 075dae1af164..96f5d9129f20 100644 --- a/arch/blackfin/mach-bf533/include/mach/portmux.h +++ b/arch/blackfin/mach-bf533/include/mach/portmux.h @@ -7,7 +7,7 @@ #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ -#define MAX_RESOURCES MAX_BLACKFIN_GPIOS +#define MAX_RESOURCES MAX_BLACKFIN_GPIOS #define P_PPI0_CLK (P_DONTCARE) #define P_PPI0_FS1 (P_DONTCARE) @@ -60,6 +60,7 @@ #define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF2)) #define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF1)) #define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PF0)) +#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PF2 #define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2 #define P_TMR2 (P_DONTCARE) diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h index d2c427bc6656..43df6afd22ad 100644 --- a/arch/blackfin/mach-bf537/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h @@ -5,7 +5,7 @@ * and can be replaced with that version at any time * DO NOT EDIT THIS FILE * - * Copyright 2004-2009 Analog Devices Inc. + * Copyright 2004-2010 Analog Devices Inc. * Licensed under the ADI BSD license. * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ @@ -162,8 +162,14 @@ #define ANOMALY_05000461 (1) /* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ #define ANOMALY_05000473 (1) +/* Possible Lockup Condition whem Modifying PLL from External Memory */ +#define ANOMALY_05000475 (1) /* TESTSET Instruction Cannot Be Interrupted */ #define ANOMALY_05000477 (1) +/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ +#define ANOMALY_05000481 (1) +/* IFLUSH sucks at life */ +#define ANOMALY_05000491 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -179,6 +185,7 @@ #define ANOMALY_05000198 (0) #define ANOMALY_05000202 (0) #define ANOMALY_05000215 (0) +#define ANOMALY_05000219 (0) #define ANOMALY_05000220 (0) #define ANOMALY_05000227 (0) #define ANOMALY_05000230 (0) @@ -211,6 +218,6 @@ #define ANOMALY_05000465 (0) #define ANOMALY_05000467 (0) #define ANOMALY_05000474 (0) -#define ANOMALY_05000475 (0) +#define ANOMALY_05000485 (0) #endif diff --git a/arch/blackfin/mach-bf537/include/mach/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h index cf396ea40092..aad61b887373 100644 --- a/arch/blackfin/mach-bf537/include/mach/defBF534.h +++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h @@ -434,22 +434,22 @@ /* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ #define TWI0_REGBASE 0xFFC01400 -#define TWI_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */ -#define TWI_CONTROL 0xFFC01404 /* TWI Control Register */ -#define TWI_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */ -#define TWI_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */ -#define TWI_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */ -#define TWI_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */ -#define TWI_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */ -#define TWI_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */ -#define TWI_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */ -#define TWI_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */ -#define TWI_FIFO_CTL 0xFFC01428 /* FIFO Control Register */ -#define TWI_FIFO_STAT 0xFFC0142C /* FIFO Status Register */ -#define TWI_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */ -#define TWI_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */ -#define TWI_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */ -#define TWI_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */ +#define TWI0_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */ +#define TWI0_CONTROL 0xFFC01404 /* TWI Control Register */ +#define TWI0_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */ +#define TWI0_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */ +#define TWI0_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */ +#define TWI0_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */ +#define TWI0_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */ +#define TWI0_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */ +#define TWI0_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */ +#define TWI0_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */ +#define TWI0_FIFO_CTL 0xFFC01428 /* FIFO Control Register */ +#define TWI0_FIFO_STAT 0xFFC0142C /* FIFO Status Register */ +#define TWI0_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */ +#define TWI0_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */ +#define TWI0_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */ +#define TWI0_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */ /* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */ #define PORTGIO 0xFFC01500 /* Port G I/O Pin State Specify Register */ @@ -1642,7 +1642,7 @@ #define TWI_ENA 0x0080 /* TWI Enable */ #define SCCB 0x0200 /* SCCB Compatibility Enable */ -/* TWI_SLAVE_CTRL Masks */ +/* TWI_SLAVE_CTL Masks */ #define SEN 0x0001 /* Slave Enable */ #define SADD_LEN 0x0002 /* Slave Address Length */ #define STDVAL 0x0004 /* Slave Transmit Data Valid */ @@ -1653,7 +1653,7 @@ #define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */ #define GCALL 0x0002 /* General Call Indicator */ -/* TWI_MASTER_CTRL Masks */ +/* TWI_MASTER_CTL Masks */ #define MEN 0x0001 /* Master Mode Enable */ #define MADD_LEN 0x0002 /* Master Address Length */ #define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */ diff --git a/arch/blackfin/mach-bf537/include/mach/gpio.h b/arch/blackfin/mach-bf537/include/mach/gpio.h index 104bff85290d..f80c2995efdb 100644 --- a/arch/blackfin/mach-bf537/include/mach/gpio.h +++ b/arch/blackfin/mach-bf537/include/mach/gpio.h @@ -9,54 +9,54 @@ #define MAX_BLACKFIN_GPIOS 48 -#define GPIO_PF0 0 -#define GPIO_PF1 1 -#define GPIO_PF2 2 -#define GPIO_PF3 3 -#define GPIO_PF4 4 -#define GPIO_PF5 5 -#define GPIO_PF6 6 -#define GPIO_PF7 7 -#define GPIO_PF8 8 -#define GPIO_PF9 9 -#define GPIO_PF10 10 -#define GPIO_PF11 11 -#define GPIO_PF12 12 -#define GPIO_PF13 13 -#define GPIO_PF14 14 -#define GPIO_PF15 15 -#define GPIO_PG0 16 -#define GPIO_PG1 17 -#define GPIO_PG2 18 -#define GPIO_PG3 19 -#define GPIO_PG4 20 -#define GPIO_PG5 21 -#define GPIO_PG6 22 -#define GPIO_PG7 23 -#define GPIO_PG8 24 -#define GPIO_PG9 25 -#define GPIO_PG10 26 -#define GPIO_PG11 27 -#define GPIO_PG12 28 -#define GPIO_PG13 29 -#define GPIO_PG14 30 -#define GPIO_PG15 31 -#define GPIO_PH0 32 -#define GPIO_PH1 33 -#define GPIO_PH2 34 -#define GPIO_PH3 35 -#define GPIO_PH4 36 -#define GPIO_PH5 37 -#define GPIO_PH6 38 -#define GPIO_PH7 39 -#define GPIO_PH8 40 -#define GPIO_PH9 41 -#define GPIO_PH10 42 -#define GPIO_PH11 43 -#define GPIO_PH12 44 -#define GPIO_PH13 45 -#define GPIO_PH14 46 -#define GPIO_PH15 47 +#define GPIO_PF0 0 +#define GPIO_PF1 1 +#define GPIO_PF2 2 +#define GPIO_PF3 3 +#define GPIO_PF4 4 +#define GPIO_PF5 5 +#define GPIO_PF6 6 +#define GPIO_PF7 7 +#define GPIO_PF8 8 +#define GPIO_PF9 9 +#define GPIO_PF10 10 +#define GPIO_PF11 11 +#define GPIO_PF12 12 +#define GPIO_PF13 13 +#define GPIO_PF14 14 +#define GPIO_PF15 15 +#define GPIO_PG0 16 +#define GPIO_PG1 17 +#define GPIO_PG2 18 +#define GPIO_PG3 19 +#define GPIO_PG4 20 +#define GPIO_PG5 21 +#define GPIO_PG6 22 +#define GPIO_PG7 23 +#define GPIO_PG8 24 +#define GPIO_PG9 25 +#define GPIO_PG10 26 +#define GPIO_PG11 27 +#define GPIO_PG12 28 +#define GPIO_PG13 29 +#define GPIO_PG14 30 +#define GPIO_PG15 31 +#define GPIO_PH0 32 +#define GPIO_PH1 33 +#define GPIO_PH2 34 +#define GPIO_PH3 35 +#define GPIO_PH4 36 +#define GPIO_PH5 37 +#define GPIO_PH6 38 +#define GPIO_PH7 39 +#define GPIO_PH8 40 +#define GPIO_PH9 41 +#define GPIO_PH10 42 +#define GPIO_PH11 43 +#define GPIO_PH12 44 +#define GPIO_PH13 45 +#define GPIO_PH14 46 +#define GPIO_PH15 47 #define PORT_F GPIO_PF0 #define PORT_G GPIO_PG0 diff --git a/arch/blackfin/mach-bf537/include/mach/portmux.h b/arch/blackfin/mach-bf537/include/mach/portmux.h index da9760329e49..71d9eaeb579e 100644 --- a/arch/blackfin/mach-bf537/include/mach/portmux.h +++ b/arch/blackfin/mach-bf537/include/mach/portmux.h @@ -7,7 +7,7 @@ #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ -#define MAX_RESOURCES (MAX_BLACKFIN_GPIOS + GPIO_BANKSIZE) /* We additionally handle PORTJ */ +#define MAX_RESOURCES (MAX_BLACKFIN_GPIOS + GPIO_BANKSIZE) /* We additionally handle PORTJ */ #define P_UART0_TX (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0)) #define P_UART0_RX (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0)) @@ -37,6 +37,7 @@ #define P_PPI0_FS1 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1)) #define P_TACLK0 (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1)) #define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1)) +#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PF10 #define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1 #define P_PPI0_D0 (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0)) @@ -135,7 +136,6 @@ P_MDC, \ P_MDIO, 0} - #define P_RMII0 {\ P_MII0_ETxD0, \ P_MII0_ETxD1, \ @@ -148,4 +148,5 @@ P_RMII0_CRS_DV, \ P_MDC, \ P_MDIO, 0} -#endif /* _MACH_PORTMUX_H_ */ + +#endif /* _MACH_PORTMUX_H_ */ diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h index d882b7e6f59b..8774b481c78e 100644 --- a/arch/blackfin/mach-bf538/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h @@ -5,14 +5,14 @@ * and can be replaced with that version at any time * DO NOT EDIT THIS FILE * - * Copyright 2004-2009 Analog Devices Inc. + * Copyright 2004-2010 Analog Devices Inc. * Licensed under the ADI BSD license. * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: - * - Revision G, 09/18/2008; ADSP-BF538/BF538F Blackfin Processor Anomaly List - * - Revision L, 09/18/2008; ADSP-BF539/BF539F Blackfin Processor Anomaly List + * - Revision H, 07/10/2009; ADSP-BF538/BF538F Blackfin Processor Anomaly List + * - Revision M, 07/10/2009; ADSP-BF539/BF539F Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -132,10 +132,18 @@ #define ANOMALY_05000443 (1) /* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) +/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */ +#define ANOMALY_05000462 (1) /* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ #define ANOMALY_05000473 (1) +/* Possible Lockup Condition whem Modifying PLL from External Memory */ +#define ANOMALY_05000475 (1) /* TESTSET Instruction Cannot Be Interrupted */ #define ANOMALY_05000477 (1) +/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ +#define ANOMALY_05000481 (1) +/* IFLUSH sucks at life */ +#define ANOMALY_05000491 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -185,6 +193,6 @@ #define ANOMALY_05000465 (0) #define ANOMALY_05000467 (0) #define ANOMALY_05000474 (0) -#define ANOMALY_05000475 (0) +#define ANOMALY_05000485 (0) #endif diff --git a/arch/blackfin/mach-bf538/include/mach/cdefBF538.h b/arch/blackfin/mach-bf538/include/mach/cdefBF538.h index 401ebd79d0aa..66aa722cf6c8 100644 --- a/arch/blackfin/mach-bf538/include/mach/cdefBF538.h +++ b/arch/blackfin/mach-bf538/include/mach/cdefBF538.h @@ -1293,70 +1293,6 @@ #define bfin_write_PPI_COUNT(val) bfin_write16(PPI_COUNT, val) #define bfin_read_PPI_FRAME() bfin_read16(PPI_FRAME) #define bfin_write_PPI_FRAME(val) bfin_write16(PPI_FRAME, val) -#define bfin_read_TWI0_CLKDIV() bfin_read16(TWI0_CLKDIV) -#define bfin_write_TWI0_CLKDIV(val) bfin_write16(TWI0_CLKDIV, val) -#define bfin_read_TWI0_CONTROL() bfin_read16(TWI0_CONTROL) -#define bfin_write_TWI0_CONTROL(val) bfin_write16(TWI0_CONTROL, val) -#define bfin_read_TWI0_SLAVE_CTRL() bfin_read16(TWI0_SLAVE_CTRL) -#define bfin_write_TWI0_SLAVE_CTRL(val) bfin_write16(TWI0_SLAVE_CTRL, val) -#define bfin_read_TWI0_SLAVE_STAT() bfin_read16(TWI0_SLAVE_STAT) -#define bfin_write_TWI0_SLAVE_STAT(val) bfin_write16(TWI0_SLAVE_STAT, val) -#define bfin_read_TWI0_SLAVE_ADDR() bfin_read16(TWI0_SLAVE_ADDR) -#define bfin_write_TWI0_SLAVE_ADDR(val) bfin_write16(TWI0_SLAVE_ADDR, val) -#define bfin_read_TWI0_MASTER_CTL() bfin_read16(TWI0_MASTER_CTL) -#define bfin_write_TWI0_MASTER_CTL(val) bfin_write16(TWI0_MASTER_CTL, val) -#define bfin_read_TWI0_MASTER_STAT() bfin_read16(TWI0_MASTER_STAT) -#define bfin_write_TWI0_MASTER_STAT(val) bfin_write16(TWI0_MASTER_STAT, val) -#define bfin_read_TWI0_MASTER_ADDR() bfin_read16(TWI0_MASTER_ADDR) -#define bfin_write_TWI0_MASTER_ADDR(val) bfin_write16(TWI0_MASTER_ADDR, val) -#define bfin_read_TWI0_INT_STAT() bfin_read16(TWI0_INT_STAT) -#define bfin_write_TWI0_INT_STAT(val) bfin_write16(TWI0_INT_STAT, val) -#define bfin_read_TWI0_INT_MASK() bfin_read16(TWI0_INT_MASK) -#define bfin_write_TWI0_INT_MASK(val) bfin_write16(TWI0_INT_MASK, val) -#define bfin_read_TWI0_FIFO_CTL() bfin_read16(TWI0_FIFO_CTL) -#define bfin_write_TWI0_FIFO_CTL(val) bfin_write16(TWI0_FIFO_CTL, val) -#define bfin_read_TWI0_FIFO_STAT() bfin_read16(TWI0_FIFO_STAT) -#define bfin_write_TWI0_FIFO_STAT(val) bfin_write16(TWI0_FIFO_STAT, val) -#define bfin_read_TWI0_XMT_DATA8() bfin_read16(TWI0_XMT_DATA8) -#define bfin_write_TWI0_XMT_DATA8(val) bfin_write16(TWI0_XMT_DATA8, val) -#define bfin_read_TWI0_XMT_DATA16() bfin_read16(TWI0_XMT_DATA16) -#define bfin_write_TWI0_XMT_DATA16(val) bfin_write16(TWI0_XMT_DATA16, val) -#define bfin_read_TWI0_RCV_DATA8() bfin_read16(TWI0_RCV_DATA8) -#define bfin_write_TWI0_RCV_DATA8(val) bfin_write16(TWI0_RCV_DATA8, val) -#define bfin_read_TWI0_RCV_DATA16() bfin_read16(TWI0_RCV_DATA16) -#define bfin_write_TWI0_RCV_DATA16(val) bfin_write16(TWI0_RCV_DATA16, val) -#define bfin_read_TWI1_CLKDIV() bfin_read16(TWI1_CLKDIV) -#define bfin_write_TWI1_CLKDIV(val) bfin_write16(TWI1_CLKDIV, val) -#define bfin_read_TWI1_CONTROL() bfin_read16(TWI1_CONTROL) -#define bfin_write_TWI1_CONTROL(val) bfin_write16(TWI1_CONTROL, val) -#define bfin_read_TWI1_SLAVE_CTRL() bfin_read16(TWI1_SLAVE_CTRL) -#define bfin_write_TWI1_SLAVE_CTRL(val) bfin_write16(TWI1_SLAVE_CTRL, val) -#define bfin_read_TWI1_SLAVE_STAT() bfin_read16(TWI1_SLAVE_STAT) -#define bfin_write_TWI1_SLAVE_STAT(val) bfin_write16(TWI1_SLAVE_STAT, val) -#define bfin_read_TWI1_SLAVE_ADDR() bfin_read16(TWI1_SLAVE_ADDR) -#define bfin_write_TWI1_SLAVE_ADDR(val) bfin_write16(TWI1_SLAVE_ADDR, val) -#define bfin_read_TWI1_MASTER_CTL() bfin_read16(TWI1_MASTER_CTL) -#define bfin_write_TWI1_MASTER_CTL(val) bfin_write16(TWI1_MASTER_CTL, val) -#define bfin_read_TWI1_MASTER_STAT() bfin_read16(TWI1_MASTER_STAT) -#define bfin_write_TWI1_MASTER_STAT(val) bfin_write16(TWI1_MASTER_STAT, val) -#define bfin_read_TWI1_MASTER_ADDR() bfin_read16(TWI1_MASTER_ADDR) -#define bfin_write_TWI1_MASTER_ADDR(val) bfin_write16(TWI1_MASTER_ADDR, val) -#define bfin_read_TWI1_INT_STAT() bfin_read16(TWI1_INT_STAT) -#define bfin_write_TWI1_INT_STAT(val) bfin_write16(TWI1_INT_STAT, val) -#define bfin_read_TWI1_INT_MASK() bfin_read16(TWI1_INT_MASK) -#define bfin_write_TWI1_INT_MASK(val) bfin_write16(TWI1_INT_MASK, val) -#define bfin_read_TWI1_FIFO_CTL() bfin_read16(TWI1_FIFO_CTL) -#define bfin_write_TWI1_FIFO_CTL(val) bfin_write16(TWI1_FIFO_CTL, val) -#define bfin_read_TWI1_FIFO_STAT() bfin_read16(TWI1_FIFO_STAT) -#define bfin_write_TWI1_FIFO_STAT(val) bfin_write16(TWI1_FIFO_STAT, val) -#define bfin_read_TWI1_XMT_DATA8() bfin_read16(TWI1_XMT_DATA8) -#define bfin_write_TWI1_XMT_DATA8(val) bfin_write16(TWI1_XMT_DATA8, val) -#define bfin_read_TWI1_XMT_DATA16() bfin_read16(TWI1_XMT_DATA16) -#define bfin_write_TWI1_XMT_DATA16(val) bfin_write16(TWI1_XMT_DATA16, val) -#define bfin_read_TWI1_RCV_DATA8() bfin_read16(TWI1_RCV_DATA8) -#define bfin_write_TWI1_RCV_DATA8(val) bfin_write16(TWI1_RCV_DATA8, val) -#define bfin_read_TWI1_RCV_DATA16() bfin_read16(TWI1_RCV_DATA16) -#define bfin_write_TWI1_RCV_DATA16(val) bfin_write16(TWI1_RCV_DATA16, val) #define bfin_read_CAN_MC1() bfin_read16(CAN_MC1) #define bfin_write_CAN_MC1(val) bfin_write16(CAN_MC1, val) #define bfin_read_CAN_MD1() bfin_read16(CAN_MD1) diff --git a/arch/blackfin/mach-bf538/include/mach/defBF539.h b/arch/blackfin/mach-bf538/include/mach/defBF539.h index d7061d9f2a83..b674a1c4aef1 100644 --- a/arch/blackfin/mach-bf538/include/mach/defBF539.h +++ b/arch/blackfin/mach-bf538/include/mach/defBF539.h @@ -442,15 +442,15 @@ /* Two-Wire Interface 0 (0xFFC01400 - 0xFFC014FF) */ #define TWI0_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */ #define TWI0_CONTROL 0xFFC01404 /* TWI0 Master Internal Time Reference Register */ -#define TWI0_SLAVE_CTRL 0xFFC01408 /* Slave Mode Control Register */ +#define TWI0_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */ #define TWI0_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */ #define TWI0_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */ -#define TWI0_MASTER_CTRL 0xFFC01414 /* Master Mode Control Register */ +#define TWI0_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */ #define TWI0_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */ #define TWI0_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */ #define TWI0_INT_STAT 0xFFC01420 /* TWI0 Master Interrupt Register */ #define TWI0_INT_MASK 0xFFC01424 /* TWI0 Master Interrupt Mask Register */ -#define TWI0_FIFO_CTRL 0xFFC01428 /* FIFO Control Register */ +#define TWI0_FIFO_CTL 0xFFC01428 /* FIFO Control Register */ #define TWI0_FIFO_STAT 0xFFC0142C /* FIFO Status Register */ #define TWI0_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */ #define TWI0_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */ @@ -761,15 +761,15 @@ /* Two-Wire Interface 1 (0xFFC02200 - 0xFFC022FF) */ #define TWI1_CLKDIV 0xFFC02200 /* Serial Clock Divider Register */ #define TWI1_CONTROL 0xFFC02204 /* TWI1 Master Internal Time Reference Register */ -#define TWI1_SLAVE_CTRL 0xFFC02208 /* Slave Mode Control Register */ +#define TWI1_SLAVE_CTL 0xFFC02208 /* Slave Mode Control Register */ #define TWI1_SLAVE_STAT 0xFFC0220C /* Slave Mode Status Register */ #define TWI1_SLAVE_ADDR 0xFFC02210 /* Slave Mode Address Register */ -#define TWI1_MASTER_CTRL 0xFFC02214 /* Master Mode Control Register */ +#define TWI1_MASTER_CTL 0xFFC02214 /* Master Mode Control Register */ #define TWI1_MASTER_STAT 0xFFC02218 /* Master Mode Status Register */ #define TWI1_MASTER_ADDR 0xFFC0221C /* Master Mode Address Register */ #define TWI1_INT_STAT 0xFFC02220 /* TWI1 Master Interrupt Register */ #define TWI1_INT_MASK 0xFFC02224 /* TWI1 Master Interrupt Mask Register */ -#define TWI1_FIFO_CTRL 0xFFC02228 /* FIFO Control Register */ +#define TWI1_FIFO_CTL 0xFFC02228 /* FIFO Control Register */ #define TWI1_FIFO_STAT 0xFFC0222C /* FIFO Status Register */ #define TWI1_XMT_DATA8 0xFFC02280 /* FIFO Transmit Data Single Byte Register */ #define TWI1_XMT_DATA16 0xFFC02284 /* FIFO Transmit Data Double Byte Register */ @@ -2401,7 +2401,7 @@ #define XMTSERV 0x0040 /* Transmit FIFO Service */ #define RCVSERV 0x0080 /* Receive FIFO Service */ -/* TWIx_FIFO_CTRL Masks */ +/* TWIx_FIFO_CTL Masks */ #define XMTFLUSH 0x0001 /* Transmit Buffer Flush */ #define RCVFLUSH 0x0002 /* Receive Buffer Flush */ #define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */ diff --git a/arch/blackfin/mach-bf538/include/mach/gpio.h b/arch/blackfin/mach-bf538/include/mach/gpio.h index 0c346fba9619..bd9adb7183da 100644 --- a/arch/blackfin/mach-bf538/include/mach/gpio.h +++ b/arch/blackfin/mach-bf538/include/mach/gpio.h @@ -10,60 +10,60 @@ #define MAX_BLACKFIN_GPIOS 16 #define BFIN_SPECIAL_GPIO_BANKS 3 -#define GPIO_PF0 0 /* PF */ -#define GPIO_PF1 1 -#define GPIO_PF2 2 -#define GPIO_PF3 3 -#define GPIO_PF4 4 -#define GPIO_PF5 5 -#define GPIO_PF6 6 -#define GPIO_PF7 7 -#define GPIO_PF8 8 -#define GPIO_PF9 9 -#define GPIO_PF10 10 -#define GPIO_PF11 11 -#define GPIO_PF12 12 -#define GPIO_PF13 13 -#define GPIO_PF14 14 -#define GPIO_PF15 15 -#define GPIO_PC0 16 /* PC */ -#define GPIO_PC1 17 -#define GPIO_PC4 20 -#define GPIO_PC5 21 -#define GPIO_PC6 22 -#define GPIO_PC7 23 -#define GPIO_PC8 24 -#define GPIO_PC9 25 -#define GPIO_PD0 32 /* PD */ -#define GPIO_PD1 33 -#define GPIO_PD2 34 -#define GPIO_PD3 35 -#define GPIO_PD4 36 -#define GPIO_PD5 37 -#define GPIO_PD6 38 -#define GPIO_PD7 39 -#define GPIO_PD8 40 -#define GPIO_PD9 41 -#define GPIO_PD10 42 -#define GPIO_PD11 43 -#define GPIO_PD12 44 -#define GPIO_PD13 45 -#define GPIO_PE0 48 /* PE */ -#define GPIO_PE1 49 -#define GPIO_PE2 50 -#define GPIO_PE3 51 -#define GPIO_PE4 52 -#define GPIO_PE5 53 -#define GPIO_PE6 54 -#define GPIO_PE7 55 -#define GPIO_PE8 56 -#define GPIO_PE9 57 -#define GPIO_PE10 58 -#define GPIO_PE11 59 -#define GPIO_PE12 60 -#define GPIO_PE13 61 -#define GPIO_PE14 62 -#define GPIO_PE15 63 +#define GPIO_PF0 0 /* PF */ +#define GPIO_PF1 1 +#define GPIO_PF2 2 +#define GPIO_PF3 3 +#define GPIO_PF4 4 +#define GPIO_PF5 5 +#define GPIO_PF6 6 +#define GPIO_PF7 7 +#define GPIO_PF8 8 +#define GPIO_PF9 9 +#define GPIO_PF10 10 +#define GPIO_PF11 11 +#define GPIO_PF12 12 +#define GPIO_PF13 13 +#define GPIO_PF14 14 +#define GPIO_PF15 15 +#define GPIO_PC0 16 /* PC */ +#define GPIO_PC1 17 +#define GPIO_PC4 20 +#define GPIO_PC5 21 +#define GPIO_PC6 22 +#define GPIO_PC7 23 +#define GPIO_PC8 24 +#define GPIO_PC9 25 +#define GPIO_PD0 32 /* PD */ +#define GPIO_PD1 33 +#define GPIO_PD2 34 +#define GPIO_PD3 35 +#define GPIO_PD4 36 +#define GPIO_PD5 37 +#define GPIO_PD6 38 +#define GPIO_PD7 39 +#define GPIO_PD8 40 +#define GPIO_PD9 41 +#define GPIO_PD10 42 +#define GPIO_PD11 43 +#define GPIO_PD12 44 +#define GPIO_PD13 45 +#define GPIO_PE0 48 /* PE */ +#define GPIO_PE1 49 +#define GPIO_PE2 50 +#define GPIO_PE3 51 +#define GPIO_PE4 52 +#define GPIO_PE5 53 +#define GPIO_PE6 54 +#define GPIO_PE7 55 +#define GPIO_PE8 56 +#define GPIO_PE9 57 +#define GPIO_PE10 58 +#define GPIO_PE11 59 +#define GPIO_PE12 60 +#define GPIO_PE13 61 +#define GPIO_PE14 62 +#define GPIO_PE15 63 #define PORT_F GPIO_PF0 #define PORT_C GPIO_PC0 diff --git a/arch/blackfin/mach-bf538/include/mach/portmux.h b/arch/blackfin/mach-bf538/include/mach/portmux.h index 0083ba13ee9e..b773c5fdbc72 100644 --- a/arch/blackfin/mach-bf538/include/mach/portmux.h +++ b/arch/blackfin/mach-bf538/include/mach/portmux.h @@ -108,6 +108,7 @@ #define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF2)) #define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF1)) #define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PF0)) +#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PF2 #define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2 #endif /* _MACH_PORTMUX_H_ */ diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h index 7d08c7524498..4070079e2c00 100644 --- a/arch/blackfin/mach-bf548/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h @@ -5,7 +5,7 @@ * and can be replaced with that version at any time * DO NOT EDIT THIS FILE * - * Copyright 2004-2009 Analog Devices Inc. + * Copyright 2004-2010 Analog Devices Inc. * Licensed under the ADI BSD license. * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ @@ -28,7 +28,7 @@ #define ANOMALY_05000119 (1) /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) -/* Data Corruption with Cached External Memory and Non-Cached On-Chip L2 Memory */ +/* Data Corruption/Core Hang with L2/L3 Configured in Writeback Cache Mode */ #define ANOMALY_05000220 (1) /* False Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (1) @@ -210,10 +210,16 @@ #define ANOMALY_05000473 (1) /* Access to DDR-SDRAM causes system hang under certain PLL/VR settings */ #define ANOMALY_05000474 (1) -/* Core Hang With L2/L3 Configured in Writeback Cache Mode */ -#define ANOMALY_05000475 (1) /* TESTSET Instruction Cannot Be Interrupted */ #define ANOMALY_05000477 (1) +/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ +#define ANOMALY_05000481 (1) +/* Possible USB Data Corruption When Multiple Endpoints Are Accessed by the Core */ +#define ANOMALY_05000483 (1) +/* PLL_CTL Change Using bfrom_SysControl() Can Result in Processor Overclocking */ +#define ANOMALY_05000485 (__SILICON_REVISION__ >= 2) +/* IFLUSH sucks at life */ +#define ANOMALY_05000491 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -229,6 +235,7 @@ #define ANOMALY_05000198 (0) #define ANOMALY_05000202 (0) #define ANOMALY_05000215 (0) +#define ANOMALY_05000219 (0) #define ANOMALY_05000227 (0) #define ANOMALY_05000230 (0) #define ANOMALY_05000231 (0) @@ -263,5 +270,6 @@ #define ANOMALY_05000412 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) +#define ANOMALY_05000475 (0) #endif diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h index 32f71e6a7c15..ea3ec4ea9e2b 100644 --- a/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h +++ b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h @@ -301,10 +301,10 @@ /* DMAC0 Registers */ -#define bfin_read_DMAC0_TCPER() bfin_read16(DMAC0_TCPER) -#define bfin_write_DMAC0_TCPER(val) bfin_write16(DMAC0_TCPER, val) -#define bfin_read_DMAC0_TCCNT() bfin_read16(DMAC0_TCCNT) -#define bfin_write_DMAC0_TCCNT(val) bfin_write16(DMAC0_TCCNT, val) +#define bfin_read_DMAC0_TC_PER() bfin_read16(DMAC0_TC_PER) +#define bfin_write_DMAC0_TC_PER(val) bfin_write16(DMAC0_TC_PER, val) +#define bfin_read_DMAC0_TC_CNT() bfin_read16(DMAC0_TC_CNT) +#define bfin_write_DMAC0_TC_CNT(val) bfin_write16(DMAC0_TC_CNT, val) /* DMA Channel 0 Registers */ @@ -1155,10 +1155,10 @@ /* DMAC1 Registers */ -#define bfin_read_DMAC1_TCPER() bfin_read16(DMAC1_TCPER) -#define bfin_write_DMAC1_TCPER(val) bfin_write16(DMAC1_TCPER, val) -#define bfin_read_DMAC1_TCCNT() bfin_read16(DMAC1_TCCNT) -#define bfin_write_DMAC1_TCCNT(val) bfin_write16(DMAC1_TCCNT, val) +#define bfin_read_DMAC1_TC_PER() bfin_read16(DMAC1_TC_PER) +#define bfin_write_DMAC1_TC_PER(val) bfin_write16(DMAC1_TC_PER, val) +#define bfin_read_DMAC1_TC_CNT() bfin_read16(DMAC1_TC_CNT) +#define bfin_write_DMAC1_TC_CNT(val) bfin_write16(DMAC1_TC_CNT, val) /* DMA Channel 12 Registers */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF542.h b/arch/blackfin/mach-bf548/include/mach/defBF542.h index d3bc6d1df547..abf5f750dd8b 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF542.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF542.h @@ -366,136 +366,6 @@ #define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */ -/* Bit masks for SDH_COMMAND */ - -#define CMD_IDX 0x3f /* Command Index */ -#define CMD_RSP 0x40 /* Response */ -#define CMD_L_RSP 0x80 /* Long Response */ -#define CMD_INT_E 0x100 /* Command Interrupt */ -#define CMD_PEND_E 0x200 /* Command Pending */ -#define CMD_E 0x400 /* Command Enable */ - -/* Bit masks for SDH_PWR_CTL */ - -#define PWR_ON 0x3 /* Power On */ -#if 0 -#define TBD 0x3c /* TBD */ -#endif -#define SD_CMD_OD 0x40 /* Open Drain Output */ -#define ROD_CTL 0x80 /* Rod Control */ - -/* Bit masks for SDH_CLK_CTL */ - -#define CLKDIV 0xff /* MC_CLK Divisor */ -#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */ -#define PWR_SV_E 0x200 /* Power Save Enable */ -#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */ -#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */ - -/* Bit masks for SDH_RESP_CMD */ - -#define RESP_CMD 0x3f /* Response Command */ - -/* Bit masks for SDH_DATA_CTL */ - -#define DTX_E 0x1 /* Data Transfer Enable */ -#define DTX_DIR 0x2 /* Data Transfer Direction */ -#define DTX_MODE 0x4 /* Data Transfer Mode */ -#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */ -#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */ - -/* Bit masks for SDH_STATUS */ - -#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ -#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ -#define CMD_TIME_OUT 0x4 /* CMD Time Out */ -#define DAT_TIME_OUT 0x8 /* Data Time Out */ -#define TX_UNDERRUN 0x10 /* Transmit Underrun */ -#define RX_OVERRUN 0x20 /* Receive Overrun */ -#define CMD_RESP_END 0x40 /* CMD Response End */ -#define CMD_SENT 0x80 /* CMD Sent */ -#define DAT_END 0x100 /* Data End */ -#define START_BIT_ERR 0x200 /* Start Bit Error */ -#define DAT_BLK_END 0x400 /* Data Block End */ -#define CMD_ACT 0x800 /* CMD Active */ -#define TX_ACT 0x1000 /* Transmit Active */ -#define RX_ACT 0x2000 /* Receive Active */ -#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */ -#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */ -#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */ -#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */ -#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */ -#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */ -#define TX_DAT_RDY 0x100000 /* Transmit Data Available */ -#define RX_FIFO_RDY 0x200000 /* Receive Data Available */ - -/* Bit masks for SDH_STATUS_CLR */ - -#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */ -#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */ -#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */ -#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */ -#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */ -#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */ -#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */ -#define CMD_SENT_STAT 0x80 /* CMD Sent Status */ -#define DAT_END_STAT 0x100 /* Data End Status */ -#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */ -#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */ - -/* Bit masks for SDH_MASK0 */ - -#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */ -#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */ -#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */ -#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */ -#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */ -#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */ -#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */ -#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */ -#define DAT_END_MASK 0x100 /* Data End Mask */ -#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */ -#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */ -#define CMD_ACT_MASK 0x800 /* CMD Active Mask */ -#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */ -#define RX_ACT_MASK 0x2000 /* Receive Active Mask */ -#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */ -#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */ -#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */ -#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */ -#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */ -#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */ -#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */ -#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */ - -/* Bit masks for SDH_FIFO_CNT */ - -#define FIFO_COUNT 0x7fff /* FIFO Count */ - -/* Bit masks for SDH_E_STATUS */ - -#define SDIO_INT_DET 0x2 /* SDIO Int Detected */ -#define SD_CARD_DET 0x10 /* SD Card Detect */ - -/* Bit masks for SDH_E_MASK */ - -#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */ -#define SCD_MSK 0x40 /* Mask Card Detect */ - -/* Bit masks for SDH_CFG */ - -#define CLKS_EN 0x1 /* Clocks Enable */ -#define SD4E 0x4 /* SDIO 4-Bit Enable */ -#define MWE 0x8 /* Moving Window Enable */ -#define SD_RST 0x10 /* SDMMC Reset */ -#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */ -#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */ -#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */ - -/* Bit masks for SDH_RD_WAIT_EN */ - -#define RWR 0x1 /* Read Wait Request */ - /* Bit masks for ATAPI_CONTROL */ #define PIO_START 0x1 /* Start PIO/Reg Op */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF544.h b/arch/blackfin/mach-bf548/include/mach/defBF544.h index f916c52a148a..e2771094de02 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF544.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF544.h @@ -60,15 +60,15 @@ #define TWI1_REGBASE 0xffc02200 #define TWI1_CLKDIV 0xffc02200 /* Clock Divider Register */ #define TWI1_CONTROL 0xffc02204 /* TWI Control Register */ -#define TWI1_SLAVE_CTRL 0xffc02208 /* TWI Slave Mode Control Register */ +#define TWI1_SLAVE_CTL 0xffc02208 /* TWI Slave Mode Control Register */ #define TWI1_SLAVE_STAT 0xffc0220c /* TWI Slave Mode Status Register */ #define TWI1_SLAVE_ADDR 0xffc02210 /* TWI Slave Mode Address Register */ -#define TWI1_MASTER_CTRL 0xffc02214 /* TWI Master Mode Control Register */ +#define TWI1_MASTER_CTL 0xffc02214 /* TWI Master Mode Control Register */ #define TWI1_MASTER_STAT 0xffc02218 /* TWI Master Mode Status Register */ #define TWI1_MASTER_ADDR 0xffc0221c /* TWI Master Mode Address Register */ #define TWI1_INT_STAT 0xffc02220 /* TWI Interrupt Status Register */ #define TWI1_INT_MASK 0xffc02224 /* TWI Interrupt Mask Register */ -#define TWI1_FIFO_CTRL 0xffc02228 /* TWI FIFO Control Register */ +#define TWI1_FIFO_CTL 0xffc02228 /* TWI FIFO Control Register */ #define TWI1_FIFO_STAT 0xffc0222c /* TWI FIFO Status Register */ #define TWI1_XMT_DATA8 0xffc02280 /* TWI FIFO Transmit Data Single Byte Register */ #define TWI1_XMT_DATA16 0xffc02284 /* TWI FIFO Transmit Data Double Byte Register */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h index 72c343646b2a..be21ba5b3aa8 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF547.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h @@ -99,15 +99,15 @@ #define TWI1_REGBASE 0xffc02200 #define TWI1_CLKDIV 0xffc02200 /* Clock Divider Register */ #define TWI1_CONTROL 0xffc02204 /* TWI Control Register */ -#define TWI1_SLAVE_CTRL 0xffc02208 /* TWI Slave Mode Control Register */ +#define TWI1_SLAVE_CTL 0xffc02208 /* TWI Slave Mode Control Register */ #define TWI1_SLAVE_STAT 0xffc0220c /* TWI Slave Mode Status Register */ #define TWI1_SLAVE_ADDR 0xffc02210 /* TWI Slave Mode Address Register */ -#define TWI1_MASTER_CTRL 0xffc02214 /* TWI Master Mode Control Register */ +#define TWI1_MASTER_CTL 0xffc02214 /* TWI Master Mode Control Register */ #define TWI1_MASTER_STAT 0xffc02218 /* TWI Master Mode Status Register */ #define TWI1_MASTER_ADDR 0xffc0221c /* TWI Master Mode Address Register */ #define TWI1_INT_STAT 0xffc02220 /* TWI Interrupt Status Register */ #define TWI1_INT_MASK 0xffc02224 /* TWI Interrupt Mask Register */ -#define TWI1_FIFO_CTRL 0xffc02228 /* TWI FIFO Control Register */ +#define TWI1_FIFO_CTL 0xffc02228 /* TWI FIFO Control Register */ #define TWI1_FIFO_STAT 0xffc0222c /* TWI FIFO Status Register */ #define TWI1_XMT_DATA8 0xffc02280 /* TWI FIFO Transmit Data Single Byte Register */ #define TWI1_XMT_DATA16 0xffc02284 /* TWI FIFO Transmit Data Double Byte Register */ @@ -646,136 +646,6 @@ #define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */ -/* Bit masks for SDH_COMMAND */ - -#define CMD_IDX 0x3f /* Command Index */ -#define CMD_RSP 0x40 /* Response */ -#define CMD_L_RSP 0x80 /* Long Response */ -#define CMD_INT_E 0x100 /* Command Interrupt */ -#define CMD_PEND_E 0x200 /* Command Pending */ -#define CMD_E 0x400 /* Command Enable */ - -/* Bit masks for SDH_PWR_CTL */ - -#define PWR_ON 0x3 /* Power On */ -#if 0 -#define TBD 0x3c /* TBD */ -#endif -#define SD_CMD_OD 0x40 /* Open Drain Output */ -#define ROD_CTL 0x80 /* Rod Control */ - -/* Bit masks for SDH_CLK_CTL */ - -#define CLKDIV 0xff /* MC_CLK Divisor */ -#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */ -#define PWR_SV_E 0x200 /* Power Save Enable */ -#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */ -#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */ - -/* Bit masks for SDH_RESP_CMD */ - -#define RESP_CMD 0x3f /* Response Command */ - -/* Bit masks for SDH_DATA_CTL */ - -#define DTX_E 0x1 /* Data Transfer Enable */ -#define DTX_DIR 0x2 /* Data Transfer Direction */ -#define DTX_MODE 0x4 /* Data Transfer Mode */ -#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */ -#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */ - -/* Bit masks for SDH_STATUS */ - -#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ -#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ -#define CMD_TIME_OUT 0x4 /* CMD Time Out */ -#define DAT_TIME_OUT 0x8 /* Data Time Out */ -#define TX_UNDERRUN 0x10 /* Transmit Underrun */ -#define RX_OVERRUN 0x20 /* Receive Overrun */ -#define CMD_RESP_END 0x40 /* CMD Response End */ -#define CMD_SENT 0x80 /* CMD Sent */ -#define DAT_END 0x100 /* Data End */ -#define START_BIT_ERR 0x200 /* Start Bit Error */ -#define DAT_BLK_END 0x400 /* Data Block End */ -#define CMD_ACT 0x800 /* CMD Active */ -#define TX_ACT 0x1000 /* Transmit Active */ -#define RX_ACT 0x2000 /* Receive Active */ -#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */ -#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */ -#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */ -#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */ -#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */ -#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */ -#define TX_DAT_RDY 0x100000 /* Transmit Data Available */ -#define RX_FIFO_RDY 0x200000 /* Receive Data Available */ - -/* Bit masks for SDH_STATUS_CLR */ - -#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */ -#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */ -#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */ -#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */ -#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */ -#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */ -#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */ -#define CMD_SENT_STAT 0x80 /* CMD Sent Status */ -#define DAT_END_STAT 0x100 /* Data End Status */ -#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */ -#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */ - -/* Bit masks for SDH_MASK0 */ - -#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */ -#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */ -#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */ -#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */ -#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */ -#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */ -#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */ -#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */ -#define DAT_END_MASK 0x100 /* Data End Mask */ -#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */ -#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */ -#define CMD_ACT_MASK 0x800 /* CMD Active Mask */ -#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */ -#define RX_ACT_MASK 0x2000 /* Receive Active Mask */ -#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */ -#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */ -#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */ -#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */ -#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */ -#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */ -#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */ -#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */ - -/* Bit masks for SDH_FIFO_CNT */ - -#define FIFO_COUNT 0x7fff /* FIFO Count */ - -/* Bit masks for SDH_E_STATUS */ - -#define SDIO_INT_DET 0x2 /* SDIO Int Detected */ -#define SD_CARD_DET 0x10 /* SD Card Detect */ - -/* Bit masks for SDH_E_MASK */ - -#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */ -#define SCD_MSK 0x40 /* Mask Card Detect */ - -/* Bit masks for SDH_CFG */ - -#define CLKS_EN 0x1 /* Clocks Enable */ -#define SD4E 0x4 /* SDIO 4-Bit Enable */ -#define MWE 0x8 /* Moving Window Enable */ -#define SD_RST 0x10 /* SDMMC Reset */ -#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */ -#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */ -#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */ - -/* Bit masks for SDH_RD_WAIT_EN */ - -#define RWR 0x1 /* Read Wait Request */ - /* Bit masks for ATAPI_CONTROL */ #define PIO_START 0x1 /* Start PIO/Reg Op */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h index 0ed06c2366fe..95ff44601fd1 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h @@ -105,15 +105,15 @@ #define TWI0_REGBASE 0xffc00700 #define TWI0_CLKDIV 0xffc00700 /* Clock Divider Register */ #define TWI0_CONTROL 0xffc00704 /* TWI Control Register */ -#define TWI0_SLAVE_CTRL 0xffc00708 /* TWI Slave Mode Control Register */ +#define TWI0_SLAVE_CTL 0xffc00708 /* TWI Slave Mode Control Register */ #define TWI0_SLAVE_STAT 0xffc0070c /* TWI Slave Mode Status Register */ #define TWI0_SLAVE_ADDR 0xffc00710 /* TWI Slave Mode Address Register */ -#define TWI0_MASTER_CTRL 0xffc00714 /* TWI Master Mode Control Register */ +#define TWI0_MASTER_CTL 0xffc00714 /* TWI Master Mode Control Register */ #define TWI0_MASTER_STAT 0xffc00718 /* TWI Master Mode Status Register */ #define TWI0_MASTER_ADDR 0xffc0071c /* TWI Master Mode Address Register */ #define TWI0_INT_STAT 0xffc00720 /* TWI Interrupt Status Register */ #define TWI0_INT_MASK 0xffc00724 /* TWI Interrupt Mask Register */ -#define TWI0_FIFO_CTRL 0xffc00728 /* TWI FIFO Control Register */ +#define TWI0_FIFO_CTL 0xffc00728 /* TWI FIFO Control Register */ #define TWI0_FIFO_STAT 0xffc0072c /* TWI FIFO Status Register */ #define TWI0_XMT_DATA8 0xffc00780 /* TWI FIFO Transmit Data Single Byte Register */ #define TWI0_XMT_DATA16 0xffc00784 /* TWI FIFO Transmit Data Double Byte Register */ @@ -198,8 +198,8 @@ /* DMAC0 Registers */ -#define DMAC0_TCPER 0xffc00b0c /* DMA Controller 0 Traffic Control Periods Register */ -#define DMAC0_TCCNT 0xffc00b10 /* DMA Controller 0 Current Counts Register */ +#define DMAC0_TC_PER 0xffc00b0c /* DMA Controller 0 Traffic Control Periods Register */ +#define DMAC0_TC_CNT 0xffc00b10 /* DMA Controller 0 Current Counts Register */ /* DMA Channel 0 Registers */ @@ -688,8 +688,8 @@ /* DMAC1 Registers */ -#define DMAC1_TCPER 0xffc01b0c /* DMA Controller 1 Traffic Control Periods Register */ -#define DMAC1_TCCNT 0xffc01b10 /* DMA Controller 1 Current Counts Register */ +#define DMAC1_TC_PER 0xffc01b0c /* DMA Controller 1 Traffic Control Periods Register */ +#define DMAC1_TC_CNT 0xffc01b10 /* DMA Controller 1 Current Counts Register */ /* DMA Channel 12 Registers */ @@ -1958,57 +1958,6 @@ #define TRUN6 0x40000000 /* Timer 6 Slave Enable Status */ #define TRUN7 0x80000000 /* Timer 7 Slave Enable Status */ -/* Bit masks for CNT_CONFIG */ - -#define CNTE 0x1 /* Counter Enable */ -#define DEBE 0x2 /* Debounce Enable */ -#define CDGINV 0x10 /* CDG Pin Polarity Invert */ -#define CUDINV 0x20 /* CUD Pin Polarity Invert */ -#define CZMINV 0x40 /* CZM Pin Polarity Invert */ -#define CNTMODE 0x700 /* Counter Operating Mode */ -#define ZMZC 0x800 /* CZM Zeroes Counter Enable */ -#define BNDMODE 0x3000 /* Boundary register Mode */ -#define INPDIS 0x8000 /* CUG and CDG Input Disable */ - -/* Bit masks for CNT_IMASK */ - -#define ICIE 0x1 /* Illegal Gray/Binary Code Interrupt Enable */ -#define UCIE 0x2 /* Up count Interrupt Enable */ -#define DCIE 0x4 /* Down count Interrupt Enable */ -#define MINCIE 0x8 /* Min Count Interrupt Enable */ -#define MAXCIE 0x10 /* Max Count Interrupt Enable */ -#define COV31IE 0x20 /* Bit 31 Overflow Interrupt Enable */ -#define COV15IE 0x40 /* Bit 15 Overflow Interrupt Enable */ -#define CZEROIE 0x80 /* Count to Zero Interrupt Enable */ -#define CZMIE 0x100 /* CZM Pin Interrupt Enable */ -#define CZMEIE 0x200 /* CZM Error Interrupt Enable */ -#define CZMZIE 0x400 /* CZM Zeroes Counter Interrupt Enable */ - -/* Bit masks for CNT_STATUS */ - -#define ICII 0x1 /* Illegal Gray/Binary Code Interrupt Identifier */ -#define UCII 0x2 /* Up count Interrupt Identifier */ -#define DCII 0x4 /* Down count Interrupt Identifier */ -#define MINCII 0x8 /* Min Count Interrupt Identifier */ -#define MAXCII 0x10 /* Max Count Interrupt Identifier */ -#define COV31II 0x20 /* Bit 31 Overflow Interrupt Identifier */ -#define COV15II 0x40 /* Bit 15 Overflow Interrupt Identifier */ -#define CZEROII 0x80 /* Count to Zero Interrupt Identifier */ -#define CZMII 0x100 /* CZM Pin Interrupt Identifier */ -#define CZMEII 0x200 /* CZM Error Interrupt Identifier */ -#define CZMZII 0x400 /* CZM Zeroes Counter Interrupt Identifier */ - -/* Bit masks for CNT_COMMAND */ - -#define W1LCNT 0xf /* Load Counter Register */ -#define W1LMIN 0xf0 /* Load Min Register */ -#define W1LMAX 0xf00 /* Load Max Register */ -#define W1ZMONCE 0x1000 /* Enable CZM Clear Counter Once */ - -/* Bit masks for CNT_DEBOUNCE */ - -#define DPRESCALE 0xf /* Load Counter Register */ - /* Bit masks for SECURE_SYSSWT */ #define EMUDABL 0x1 /* Emulation Disable. */ @@ -2044,66 +1993,6 @@ #define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */ #define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */ -/* Bit masks for NFC_CTL */ - -#define WR_DLY 0xf /* Write Strobe Delay */ -#define RD_DLY 0xf0 /* Read Strobe Delay */ -#define NWIDTH 0x100 /* NAND Data Width */ -#define PG_SIZE 0x200 /* Page Size */ - -/* Bit masks for NFC_STAT */ - -#define NBUSY 0x1 /* Not Busy */ -#define WB_FULL 0x2 /* Write Buffer Full */ -#define PG_WR_STAT 0x4 /* Page Write Pending */ -#define PG_RD_STAT 0x8 /* Page Read Pending */ -#define WB_EMPTY 0x10 /* Write Buffer Empty */ - -/* Bit masks for NFC_IRQSTAT */ - -#define NBUSYIRQ 0x1 /* Not Busy IRQ */ -#define WB_OVF 0x2 /* Write Buffer Overflow */ -#define WB_EDGE 0x4 /* Write Buffer Edge Detect */ -#define RD_RDY 0x8 /* Read Data Ready */ -#define WR_DONE 0x10 /* Page Write Done */ - -/* Bit masks for NFC_IRQMASK */ - -#define MASK_BUSYIRQ 0x1 /* Mask Not Busy IRQ */ -#define MASK_WBOVF 0x2 /* Mask Write Buffer Overflow */ -#define MASK_WBEMPTY 0x4 /* Mask Write Buffer Empty */ -#define MASK_RDRDY 0x8 /* Mask Read Data Ready */ -#define MASK_WRDONE 0x10 /* Mask Write Done */ - -/* Bit masks for NFC_RST */ - -#define ECC_RST 0x1 /* ECC (and NFC counters) Reset */ - -/* Bit masks for NFC_PGCTL */ - -#define PG_RD_START 0x1 /* Page Read Start */ -#define PG_WR_START 0x2 /* Page Write Start */ - -/* Bit masks for NFC_ECC0 */ - -#define ECC0 0x7ff /* Parity Calculation Result0 */ - -/* Bit masks for NFC_ECC1 */ - -#define ECC1 0x7ff /* Parity Calculation Result1 */ - -/* Bit masks for NFC_ECC2 */ - -#define ECC2 0x7ff /* Parity Calculation Result2 */ - -/* Bit masks for NFC_ECC3 */ - -#define ECC3 0x7ff /* Parity Calculation Result3 */ - -/* Bit masks for NFC_COUNT */ - -#define ECCCNT 0x3ff /* Transfer Count */ - /* Bit masks for EPPIx_STATUS */ #define CFIFO_ERR 0x1 /* Chroma FIFO Error */ @@ -2472,33 +2361,6 @@ #define BCODE_QUICKBOOT 0x0020 /* always perform quick boot */ #define BCODE_NOBOOT 0x0030 /* always perform full boot */ -/* CNT_COMMAND bit field options */ - -#define W1LCNT_ZERO 0x0001 /* write 1 to load CNT_COUNTER with zero */ -#define W1LCNT_MIN 0x0004 /* write 1 to load CNT_COUNTER from CNT_MIN */ -#define W1LCNT_MAX 0x0008 /* write 1 to load CNT_COUNTER from CNT_MAX */ - -#define W1LMIN_ZERO 0x0010 /* write 1 to load CNT_MIN with zero */ -#define W1LMIN_CNT 0x0020 /* write 1 to load CNT_MIN from CNT_COUNTER */ -#define W1LMIN_MAX 0x0080 /* write 1 to load CNT_MIN from CNT_MAX */ - -#define W1LMAX_ZERO 0x0100 /* write 1 to load CNT_MAX with zero */ -#define W1LMAX_CNT 0x0200 /* write 1 to load CNT_MAX from CNT_COUNTER */ -#define W1LMAX_MIN 0x0400 /* write 1 to load CNT_MAX from CNT_MIN */ - -/* CNT_CONFIG bit field options */ - -#define CNTMODE_QUADENC 0x0000 /* quadrature encoder mode */ -#define CNTMODE_BINENC 0x0100 /* binary encoder mode */ -#define CNTMODE_UDCNT 0x0200 /* up/down counter mode */ -#define CNTMODE_DIRCNT 0x0400 /* direction counter mode */ -#define CNTMODE_DIRTMR 0x0500 /* direction timer mode */ - -#define BNDMODE_COMP 0x0000 /* boundary compare mode */ -#define BNDMODE_ZERO 0x1000 /* boundary compare and zero mode */ -#define BNDMODE_CAPT 0x2000 /* boundary capture mode */ -#define BNDMODE_AEXT 0x3000 /* boundary auto-extend mode */ - /* TMODE in TIMERx_CONFIG bit field options */ #define PWM_OUT 0x0001 diff --git a/arch/blackfin/mach-bf548/include/mach/gpio.h b/arch/blackfin/mach-bf548/include/mach/gpio.h index 850e39d193e3..28037e331964 100644 --- a/arch/blackfin/mach-bf548/include/mach/gpio.h +++ b/arch/blackfin/mach-bf548/include/mach/gpio.h @@ -3,6 +3,10 @@ * Licensed under the GPL-2 or later. */ + +#ifndef _MACH_GPIO_H_ +#define _MACH_GPIO_H_ + #define GPIO_PA0 0 #define GPIO_PA1 1 #define GPIO_PA2 2 @@ -166,6 +170,8 @@ #define MAX_BLACKFIN_GPIOS 160 +#ifndef __ASSEMBLY__ + struct gpio_port_t { unsigned short port_fer; unsigned short dummy1; @@ -191,3 +197,7 @@ struct gpio_port_s { unsigned short inen; unsigned int mux; }; + +#endif + +#endif /* _MACH_GPIO_H_ */ diff --git a/arch/blackfin/mach-bf548/include/mach/portmux.h b/arch/blackfin/mach-bf548/include/mach/portmux.h index 89ad6a886362..e22246202730 100644 --- a/arch/blackfin/mach-bf548/include/mach/portmux.h +++ b/arch/blackfin/mach-bf548/include/mach/portmux.h @@ -7,7 +7,7 @@ #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ -#define MAX_RESOURCES MAX_BLACKFIN_GPIOS +#define MAX_RESOURCES MAX_BLACKFIN_GPIOS #define P_SPORT2_TFS (P_DEFINED | P_IDENT(GPIO_PA0) | P_FUNCT(0)) #define P_SPORT2_DTSEC (P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(0)) @@ -131,6 +131,7 @@ #define P_KEY_COL2 (P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(3)) #define P_KEY_COL3 (P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(3)) +#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PE4 #define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1 #define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(0)) #define P_SPI0_MISO (P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(0)) diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h index 5ddc981e9937..4c108c99cb6e 100644 --- a/arch/blackfin/mach-bf561/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h @@ -5,7 +5,7 @@ * and can be replaced with that version at any time * DO NOT EDIT THIS FILE * - * Copyright 2004-2009 Analog Devices Inc. + * Copyright 2004-2010 Analog Devices Inc. * Licensed under the ADI BSD license. * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ @@ -152,8 +152,8 @@ #define ANOMALY_05000215 (__SILICON_REVISION__ < 5) /* NMI Event at Boot Time Results in Unpredictable State */ #define ANOMALY_05000219 (__SILICON_REVISION__ < 5) -/* Data Corruption with Cached External Memory and Non-Cached On-Chip L2 Memory */ -#define ANOMALY_05000220 (__SILICON_REVISION__ < 5) +/* Data Corruption/Core Hang with L2/L3 Configured in Writeback Cache Mode */ +#define ANOMALY_05000220 (__SILICON_REVISION__ < 4) /* Incorrect Pulse-Width of UART Start Bit */ #define ANOMALY_05000225 (__SILICON_REVISION__ < 5) /* Scratchpad Memory Bank Reads May Return Incorrect Data */ @@ -290,10 +290,14 @@ #define ANOMALY_05000461 (1) /* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ #define ANOMALY_05000473 (1) -/* Core Hang With L2/L3 Configured in Writeback Cache Mode */ +/* Possible Lockup Condition whem Modifying PLL from External Memory */ #define ANOMALY_05000475 (__SILICON_REVISION__ < 4) /* TESTSET Instruction Cannot Be Interrupted */ #define ANOMALY_05000477 (1) +/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ +#define ANOMALY_05000481 (1) +/* IFLUSH sucks at life */ +#define ANOMALY_05000491 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000119 (0) @@ -319,5 +323,6 @@ #define ANOMALY_05000465 (0) #define ANOMALY_05000467 (0) #define ANOMALY_05000474 (0) +#define ANOMALY_05000485 (0) #endif diff --git a/arch/blackfin/mach-bf561/include/mach/gpio.h b/arch/blackfin/mach-bf561/include/mach/gpio.h index a651a8cf805f..4f8aa5d08802 100644 --- a/arch/blackfin/mach-bf561/include/mach/gpio.h +++ b/arch/blackfin/mach-bf561/include/mach/gpio.h @@ -9,54 +9,54 @@ #define MAX_BLACKFIN_GPIOS 48 -#define GPIO_PF0 0 -#define GPIO_PF1 1 -#define GPIO_PF2 2 -#define GPIO_PF3 3 -#define GPIO_PF4 4 -#define GPIO_PF5 5 -#define GPIO_PF6 6 -#define GPIO_PF7 7 -#define GPIO_PF8 8 -#define GPIO_PF9 9 -#define GPIO_PF10 10 -#define GPIO_PF11 11 -#define GPIO_PF12 12 -#define GPIO_PF13 13 -#define GPIO_PF14 14 -#define GPIO_PF15 15 -#define GPIO_PF16 16 -#define GPIO_PF17 17 -#define GPIO_PF18 18 -#define GPIO_PF19 19 -#define GPIO_PF20 20 -#define GPIO_PF21 21 -#define GPIO_PF22 22 -#define GPIO_PF23 23 -#define GPIO_PF24 24 -#define GPIO_PF25 25 -#define GPIO_PF26 26 -#define GPIO_PF27 27 -#define GPIO_PF28 28 -#define GPIO_PF29 29 -#define GPIO_PF30 30 -#define GPIO_PF31 31 -#define GPIO_PF32 32 -#define GPIO_PF33 33 -#define GPIO_PF34 34 -#define GPIO_PF35 35 -#define GPIO_PF36 36 -#define GPIO_PF37 37 -#define GPIO_PF38 38 -#define GPIO_PF39 39 -#define GPIO_PF40 40 -#define GPIO_PF41 41 -#define GPIO_PF42 42 -#define GPIO_PF43 43 -#define GPIO_PF44 44 -#define GPIO_PF45 45 -#define GPIO_PF46 46 -#define GPIO_PF47 47 +#define GPIO_PF0 0 +#define GPIO_PF1 1 +#define GPIO_PF2 2 +#define GPIO_PF3 3 +#define GPIO_PF4 4 +#define GPIO_PF5 5 +#define GPIO_PF6 6 +#define GPIO_PF7 7 +#define GPIO_PF8 8 +#define GPIO_PF9 9 +#define GPIO_PF10 10 +#define GPIO_PF11 11 +#define GPIO_PF12 12 +#define GPIO_PF13 13 +#define GPIO_PF14 14 +#define GPIO_PF15 15 +#define GPIO_PF16 16 +#define GPIO_PF17 17 +#define GPIO_PF18 18 +#define GPIO_PF19 19 +#define GPIO_PF20 20 +#define GPIO_PF21 21 +#define GPIO_PF22 22 +#define GPIO_PF23 23 +#define GPIO_PF24 24 +#define GPIO_PF25 25 +#define GPIO_PF26 26 +#define GPIO_PF27 27 +#define GPIO_PF28 28 +#define GPIO_PF29 29 +#define GPIO_PF30 30 +#define GPIO_PF31 31 +#define GPIO_PF32 32 +#define GPIO_PF33 33 +#define GPIO_PF34 34 +#define GPIO_PF35 35 +#define GPIO_PF36 36 +#define GPIO_PF37 37 +#define GPIO_PF38 38 +#define GPIO_PF39 39 +#define GPIO_PF40 40 +#define GPIO_PF41 41 +#define GPIO_PF42 42 +#define GPIO_PF43 43 +#define GPIO_PF44 44 +#define GPIO_PF45 45 +#define GPIO_PF46 46 +#define GPIO_PF47 47 #define PORT_FIO0 GPIO_0 #define PORT_FIO1 GPIO_16 diff --git a/arch/blackfin/mach-bf561/include/mach/portmux.h b/arch/blackfin/mach-bf561/include/mach/portmux.h index 3a7b46bbe849..2339ffd0dde8 100644 --- a/arch/blackfin/mach-bf561/include/mach/portmux.h +++ b/arch/blackfin/mach-bf561/include/mach/portmux.h @@ -7,7 +7,7 @@ #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ -#define MAX_RESOURCES MAX_BLACKFIN_GPIOS +#define MAX_RESOURCES MAX_BLACKFIN_GPIOS #define P_PPI0_CLK (P_DONTCARE) #define P_PPI0_FS1 (P_DONTCARE) @@ -91,6 +91,7 @@ #define P_SPI0_MOSI (P_DONTCARE) #define P_SPI0_MISO (P_DONTCARE) #define P_SPI0_SCK (P_DONTCARE) +#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PF2 #define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2 #endif /* _MACH_PORTMUX_H_ */ diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c index f2ca211a76a0..bceb98126c21 100644 --- a/arch/blackfin/mach-common/arch_checks.c +++ b/arch/blackfin/mach-common/arch_checks.c @@ -1,7 +1,7 @@ /* * Do some checking to make sure things are OK * - * Copyright 2007-2009 Analog Devices Inc. + * Copyright 2007-2010 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ @@ -47,18 +47,20 @@ # error "The kernel load address is too high; keep it below 10meg for safety" #endif +#if ANOMALY_05000263 && defined(CONFIG_MPU) +# error the MPU will not function safely while Anomaly 05000263 applies +#endif + #if ANOMALY_05000448 # error You are using a part with anomaly 05000448, this issue causes random memory read/write failures - that means random crashes. #endif /* if 220 exists, can not set External Memory WB and L2 not_cached, either External Memory not_cached and L2 WB */ #if ANOMALY_05000220 && \ - ((defined(CONFIG_BFIN_EXTMEM_WRITEBACK) && !defined(CONFIG_BFIN_L2_DCACHEABLE)) || \ - (!defined(CONFIG_BFIN_EXTMEM_DCACHEABLE) && defined(CONFIG_BFIN_L2_WRITEBACK))) -# error You are exposing Anomaly 220 in this config, either config L2 as Write Through, or make External Memory WB. + (defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)) +# error "Anomaly 05000220 does not allow you to use Write Back cache with L2 or External Memory" #endif -#if ANOMALY_05000475 && \ - (defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)) -# error "Anomaly 475 does not allow you to use Write Back cache with L2 or External Memory" +#if ANOMALY_05000491 && !defined(CONFIG_CACHE_FLUSH_L1) +# error You need IFLUSH in L1 inst while Anomaly 05000491 applies #endif diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S index ea540318a228..790c767ca95a 100644 --- a/arch/blackfin/mach-common/cache.S +++ b/arch/blackfin/mach-common/cache.S @@ -11,7 +11,11 @@ #include <asm/cache.h> #include <asm/page.h> +#ifdef CONFIG_CACHE_FLUSH_L1 +.section .l1.text +#else .text +#endif /* 05000443 - IFLUSH cannot be last instruction in hardware loop */ #if ANOMALY_05000443 @@ -64,17 +68,6 @@ /* Invalidate all instruction cache lines assocoiated with this memory area */ ENTRY(_blackfin_icache_flush_range) -/* - * Walkaround to avoid loading wrong instruction after invalidating icache - * and following sequence is met. - * - * 1) One instruction address is cached in the instruction cache. - * 2) This instruction in SDRAM is changed. - * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range(). - * 4) This instruction is executed again, but the old one is loaded. - */ - P0 = R0; - IFLUSH[P0]; do_flush IFLUSH ENDPROC(_blackfin_icache_flush_range) diff --git a/arch/blackfin/mach-common/dpmc_modes.S b/arch/blackfin/mach-common/dpmc_modes.S index b03716896051..5969d86836a5 100644 --- a/arch/blackfin/mach-common/dpmc_modes.S +++ b/arch/blackfin/mach-common/dpmc_modes.S @@ -17,9 +17,6 @@ ENTRY(_sleep_mode) call _set_sic_iwr; - R0 = 0xFFFF (Z); - call _set_rtc_istat; - P0.H = hi(PLL_CTL); P0.L = lo(PLL_CTL); R1 = W[P0](z); @@ -65,9 +62,6 @@ ENTRY(_hibernate_mode) call _set_dram_srfs; SSYNC; - R0 = 0xFFFF (Z); - call _set_rtc_istat; - P0.H = hi(VR_CTL); P0.L = lo(VR_CTL); @@ -95,9 +89,6 @@ ENTRY(_sleep_deeper) call _set_sic_iwr; call _set_dram_srfs; /* Set SDRAM Self Refresh */ - /* Clear all the interrupts,bits sticky */ - R0 = 0xFFFF (Z); - call _set_rtc_istat; P0.H = hi(PLL_DIV); P0.L = lo(PLL_DIV); R6 = W[P0](z); @@ -269,21 +260,6 @@ ENTRY(_set_sic_iwr) RTS; ENDPROC(_set_sic_iwr) -ENTRY(_set_rtc_istat) -#ifndef CONFIG_BF561 - P0.H = hi(RTC_ISTAT); - P0.L = lo(RTC_ISTAT); - w[P0] = R0.L; - SSYNC; -#elif (ANOMALY_05000371) - nop; - nop; - nop; - nop; -#endif - RTS; -ENDPROC(_set_rtc_istat) - ENTRY(_test_pll_locked) P0.H = hi(PLL_STAT); P0.L = lo(PLL_STAT); diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c index ea7f95f6bb4c..09c1fb410748 100644 --- a/arch/blackfin/mach-common/pm.c +++ b/arch/blackfin/mach-common/pm.c @@ -61,10 +61,11 @@ void bfin_pm_suspend_standby_enter(void) int bf53x_suspend_l1_mem(unsigned char *memptr) { - dma_memcpy(memptr, (const void *) L1_CODE_START, L1_CODE_LENGTH); - dma_memcpy(memptr + L1_CODE_LENGTH, (const void *) L1_DATA_A_START, - L1_DATA_A_LENGTH); - dma_memcpy(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH, + dma_memcpy_nocache(memptr, (const void *) L1_CODE_START, + L1_CODE_LENGTH); + dma_memcpy_nocache(memptr + L1_CODE_LENGTH, + (const void *) L1_DATA_A_START, L1_DATA_A_LENGTH); + dma_memcpy_nocache(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH, (const void *) L1_DATA_B_START, L1_DATA_B_LENGTH); memcpy(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH + L1_DATA_B_LENGTH, (const void *) L1_SCRATCH_START, @@ -75,10 +76,10 @@ int bf53x_suspend_l1_mem(unsigned char *memptr) int bf53x_resume_l1_mem(unsigned char *memptr) { - dma_memcpy((void *) L1_CODE_START, memptr, L1_CODE_LENGTH); - dma_memcpy((void *) L1_DATA_A_START, memptr + L1_CODE_LENGTH, + dma_memcpy_nocache((void *) L1_CODE_START, memptr, L1_CODE_LENGTH); + dma_memcpy_nocache((void *) L1_DATA_A_START, memptr + L1_CODE_LENGTH, L1_DATA_A_LENGTH); - dma_memcpy((void *) L1_DATA_B_START, memptr + L1_CODE_LENGTH + + dma_memcpy_nocache((void *) L1_DATA_B_START, memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH, L1_DATA_B_LENGTH); memcpy((void *) L1_SCRATCH_START, memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH + L1_DATA_B_LENGTH, L1_SCRATCH_LENGTH); @@ -167,7 +168,7 @@ int bfin_pm_suspend_mem_enter(void) _disable_icplb(); bf53x_suspend_l1_mem(memptr); - do_hibernate(wakeup | vr_wakeup); /* Goodbye */ + do_hibernate(wakeup | vr_wakeup); /* See you later! */ bf53x_resume_l1_mem(memptr); |