diff options
Diffstat (limited to 'arch')
105 files changed, 1140 insertions, 871 deletions
diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 40319d91bb7f..1683bfb9166f 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -160,7 +160,6 @@ machine-$(CONFIG_ARCH_MSM) := msm machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0 machine-$(CONFIG_ARCH_IMX_V4_V5) := imx machine-$(CONFIG_ARCH_IMX_V6_V7) := imx -machine-$(CONFIG_ARCH_MX5) := mx5 machine-$(CONFIG_ARCH_MXS) := mxs machine-$(CONFIG_ARCH_NETX) := netx machine-$(CONFIG_ARCH_NOMADIK) := nomadik diff --git a/arch/arm/configs/mx5_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index d0d8dfece37e..3a4fb2e5fc68 100644 --- a/arch/arm/configs/mx5_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -3,6 +3,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_KERNEL_LZO=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=18 +CONFIG_CGROUPS=y CONFIG_RELAY=y CONFIG_EXPERT=y # CONFIG_SLUB_DEBUG is not set @@ -14,20 +15,31 @@ CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_MXC=y -CONFIG_ARCH_MX5=y -CONFIG_MACH_MX51_BABBAGE=y +CONFIG_MACH_MX31LILLY=y +CONFIG_MACH_MX31LITE=y +CONFIG_MACH_PCM037=y +CONFIG_MACH_PCM037_EET=y +CONFIG_MACH_MX31_3DS=y +CONFIG_MACH_MX31MOBOARD=y +CONFIG_MACH_QONG=y +CONFIG_MACH_ARMADILLO5X0=y +CONFIG_MACH_KZM_ARM11_01=y +CONFIG_MACH_PCM043=y +CONFIG_MACH_MX35_3DS=y +CONFIG_MACH_EUKREA_CPUIMX35=y +CONFIG_MACH_VPR200=y +CONFIG_MACH_IMX51_DT=y CONFIG_MACH_MX51_3DS=y CONFIG_MACH_EUKREA_CPUIMX51=y CONFIG_MACH_EUKREA_CPUIMX51SD=y CONFIG_MACH_MX51_EFIKAMX=y CONFIG_MACH_MX51_EFIKASB=y -CONFIG_MACH_MX53_EVK=y -CONFIG_MACH_MX53_SMD=y -CONFIG_MACH_MX53_LOCO=y -CONFIG_MACH_MX53_ARD=y +CONFIG_MACH_IMX53_DT=y +CONFIG_SOC_IMX6Q=y CONFIG_MXC_PWM=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_SMP=y CONFIG_VMSPLIT_2G=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y @@ -49,7 +61,7 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set +CONFIG_IPV6=y # CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y @@ -68,24 +80,20 @@ CONFIG_SCSI_SCAN_ASYNC=y CONFIG_ATA=y CONFIG_PATA_IMX=y CONFIG_NETDEVICES=y -CONFIG_MII=m -CONFIG_MARVELL_PHY=y -CONFIG_DAVICOM_PHY=y -CONFIG_QSEMI_PHY=y -CONFIG_LXT_PHY=y -CONFIG_CICADA_PHY=y -CONFIG_VITESSE_PHY=y -CONFIG_SMSC_PHY=y -CONFIG_BROADCOM_PHY=y -CONFIG_ICPLUS_PHY=y -CONFIG_REALTEK_PHY=y -CONFIG_NATIONAL_PHY=y -CONFIG_STE10XP=y -CONFIG_LSI_ET1011C_PHY=y -CONFIG_MICREL_PHY=y -CONFIG_NET_ETHERNET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_FARADAY is not set +CONFIG_FEC=y +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +CONFIG_SMC91X=y +CONFIG_SMC911X=y +CONFIG_SMSC911X=y +# CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_WLAN is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=y @@ -124,7 +132,6 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MXC=y CONFIG_USB_STORAGE=y CONFIG_MMC=y -CONFIG_MMC_BLOCK=m CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_ESDHC_IMX=y @@ -133,6 +140,8 @@ CONFIG_LEDS_CLASS=y CONFIG_RTC_CLASS=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y CONFIG_RTC_MXC=y +CONFIG_DMADEVICES=y +CONFIG_IMX_SDMA=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig deleted file mode 100644 index cb0717fbb03d..000000000000 --- a/arch/arm/configs/mx3_defconfig +++ /dev/null @@ -1,144 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EXPERT=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_MXC=y -CONFIG_MACH_MX31ADS_WM1133_EV1=y -CONFIG_MACH_MX31LILLY=y -CONFIG_MACH_MX31LITE=y -CONFIG_MACH_PCM037=y -CONFIG_MACH_PCM037_EET=y -CONFIG_MACH_MX31_3DS=y -CONFIG_MACH_MX31MOBOARD=y -CONFIG_MACH_QONG=y -CONFIG_MACH_ARMADILLO5X0=y -CONFIG_MACH_KZM_ARM11_01=y -CONFIG_MACH_PCM043=y -CONFIG_MACH_MX35_3DS=y -CONFIG_MACH_EUKREA_CPUIMX35=y -CONFIG_MXC_IRQ_PRIOR=y -CONFIG_MXC_PWM=y -CONFIG_ARM_ERRATA_411920=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" -CONFIG_VFP=y -CONFIG_PM_DEBUG=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_FW_LOADER=m -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_MXC=y -CONFIG_MTD_UBI=y -# CONFIG_BLK_DEV is not set -CONFIG_MISC_DEVICES=y -CONFIG_EEPROM_AT24=y -CONFIG_NETDEVICES=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_SMSC911X=y -CONFIG_DNET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_IMX=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -# CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_8250=m -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_IMX=y -CONFIG_SERIAL_IMX_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_IMX=y -CONFIG_SPI=y -CONFIG_W1=y -CONFIG_W1_MASTER_MXC=y -CONFIG_W1_SLAVE_THERM=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_IMX2_WDT=y -CONFIG_MFD_WM8350_I2C=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_WM8350=y -CONFIG_MEDIA_SUPPORT=y -CONFIG_VIDEO_DEV=y -# CONFIG_RC_CORE is not set -# CONFIG_MEDIA_TUNER_CUSTOMISE is not set -CONFIG_SOC_CAMERA=y -CONFIG_SOC_CAMERA_MT9M001=y -CONFIG_SOC_CAMERA_MT9M111=y -CONFIG_SOC_CAMERA_MT9T031=y -CONFIG_SOC_CAMERA_MT9V022=y -CONFIG_SOC_CAMERA_TW9910=y -CONFIG_SOC_CAMERA_OV772X=y -CONFIG_VIDEO_MX3=y -# CONFIG_RADIO_ADAPTERS is not set -CONFIG_FB=y -CONFIG_SOUND=y -CONFIG_SND=y -# CONFIG_SND_ARM is not set -# CONFIG_SND_SPI is not set -CONFIG_SND_SOC=y -CONFIG_SND_IMX_SOC=y -CONFIG_SND_MXC_SOC_WM1133_EV1=y -CONFIG_SND_SOC_PHYCORE_AC97=y -CONFIG_SND_SOC_EUKREA_TLV320=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_MXC=y -CONFIG_USB_GADGET=m -CONFIG_USB_FSL_USB2=m -CONFIG_USB_G_SERIAL=m -CONFIG_USB_ULPI=y -CONFIG_MMC=y -CONFIG_MMC_MXC=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_MXC=y -CONFIG_DMADEVICES=y -# CONFIG_DNOTIFY is not set -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_UBIFS_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/include/asm/kprobes.h b/arch/arm/include/asm/kprobes.h index feec86768f9c..f82ec22eeb11 100644 --- a/arch/arm/include/asm/kprobes.h +++ b/arch/arm/include/asm/kprobes.h @@ -24,7 +24,6 @@ #define MAX_INSN_SIZE 2 #define MAX_STACK_SIZE 64 /* 32 would probably be OK */ -#define regs_return_value(regs) ((regs)->ARM_r0) #define flush_insn_slot(p) do { } while (0) #define kretprobe_blacklist_size 0 diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h index 96187ff58c24..451808ba1211 100644 --- a/arch/arm/include/asm/ptrace.h +++ b/arch/arm/include/asm/ptrace.h @@ -189,6 +189,11 @@ static inline int valid_user_regs(struct pt_regs *regs) return 0; } +static inline long regs_return_value(struct pt_regs *regs) +{ + return regs->ARM_r0; +} + #define instruction_pointer(regs) (regs)->ARM_pc #ifdef CONFIG_SMP diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index 0f30c3a78fc1..d4c24d412a8d 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -129,6 +129,7 @@ extern void vfp_flush_hwstate(struct thread_info *); /* * thread information flags: * TIF_SYSCALL_TRACE - syscall trace active + * TIF_SYSCAL_AUDIT - syscall auditing active * TIF_SIGPENDING - signal pending * TIF_NEED_RESCHED - rescheduling necessary * TIF_NOTIFY_RESUME - callback before returning to user @@ -139,6 +140,7 @@ extern void vfp_flush_hwstate(struct thread_info *); #define TIF_NEED_RESCHED 1 #define TIF_NOTIFY_RESUME 2 /* callback before returning to user */ #define TIF_SYSCALL_TRACE 8 +#define TIF_SYSCALL_AUDIT 9 #define TIF_POLLING_NRFLAG 16 #define TIF_USING_IWMMXT 17 #define TIF_MEMDIE 18 /* is terminating due to OOM killer */ @@ -149,11 +151,15 @@ extern void vfp_flush_hwstate(struct thread_info *); #define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) #define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) +#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) #define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) #define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT) #define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) #define _TIF_SECCOMP (1 << TIF_SECCOMP) +/* Checks for any syscall work in entry-common.S */ +#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT) + /* * Change these and you break ASM code in entry-common.S */ diff --git a/arch/arm/include/asm/unified.h b/arch/arm/include/asm/unified.h index bc631161e9c6..f5989f46b4d2 100644 --- a/arch/arm/include/asm/unified.h +++ b/arch/arm/include/asm/unified.h @@ -37,8 +37,8 @@ #define THUMB(x...) x #ifdef __ASSEMBLY__ #define W(instr) instr.w -#endif #define BSYM(sym) sym + 1 +#endif #else /* !CONFIG_THUMB2_KERNEL */ @@ -49,8 +49,8 @@ #define THUMB(x...) #ifdef __ASSEMBLY__ #define W(instr) instr -#endif #define BSYM(sym) sym +#endif #endif /* CONFIG_THUMB2_KERNEL */ diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index b2a27b6b0046..520889cf1b5b 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -87,7 +87,7 @@ ENTRY(ret_from_fork) get_thread_info tsk ldr r1, [tsk, #TI_FLAGS] @ check for syscall tracing mov why, #1 - tst r1, #_TIF_SYSCALL_TRACE @ are we tracing syscalls? + tst r1, #_TIF_SYSCALL_WORK @ are we tracing syscalls? beq ret_slow_syscall mov r1, sp mov r0, #1 @ trace exit [IP = 1] @@ -443,7 +443,7 @@ ENTRY(vector_swi) 1: #endif - tst r10, #_TIF_SYSCALL_TRACE @ are we tracing syscalls? + tst r10, #_TIF_SYSCALL_WORK @ are we tracing syscalls? bne __sys_trace cmp scno, #NR_syscalls @ check upper syscall limit diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 483727ad6892..e1d5e1929fbd 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -906,11 +906,6 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) { unsigned long ip; - if (!test_thread_flag(TIF_SYSCALL_TRACE)) - return scno; - if (!(current->ptrace & PT_PTRACED)) - return scno; - /* * Save IP. IP is used to denote syscall entry/exit: * IP = 0 -> entry, = 1 -> exit @@ -918,6 +913,17 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) ip = regs->ARM_ip; regs->ARM_ip = why; + if (!ip) + audit_syscall_exit(regs); + else + audit_syscall_entry(AUDIT_ARCH_ARMEB, scno, regs->ARM_r0, + regs->ARM_r1, regs->ARM_r2, regs->ARM_r3); + + if (!test_thread_flag(TIF_SYSCALL_TRACE)) + return scno; + if (!(current->ptrace & PT_PTRACED)) + return scno; + current_thread_info()->syscall = scno; /* the 0x80 provides a way for the tracing parent to distinguish diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h index 46d4d876e6fb..e82c642fa53c 100644 --- a/arch/arm/mach-ep93xx/include/mach/dma.h +++ b/arch/arm/mach-ep93xx/include/mach/dma.h @@ -37,7 +37,7 @@ */ struct ep93xx_dma_data { int port; - enum dma_data_direction direction; + enum dma_transfer_direction direction; const char *name; }; @@ -80,14 +80,14 @@ static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan) * channel supports given DMA direction. Only M2P channels have such * limitation, for M2M channels the direction is configurable. */ -static inline enum dma_data_direction +static inline enum dma_transfer_direction ep93xx_dma_chan_direction(struct dma_chan *chan) { if (!ep93xx_dma_chan_is_m2p(chan)) return DMA_NONE; /* even channels are for TX, odd for RX */ - return (chan->chan_id % 2 == 0) ? DMA_TO_DEVICE : DMA_FROM_DEVICE; + return (chan->chan_id % 2 == 0) ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM; } #endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-exynos/headsmp.S b/arch/arm/mach-exynos/headsmp.S index 3cdeb3647542..5364d4bfa8bc 100644 --- a/arch/arm/mach-exynos/headsmp.S +++ b/arch/arm/mach-exynos/headsmp.S @@ -36,6 +36,8 @@ pen: ldr r7, [r6] * should now contain the SVC stack for this core */ b secondary_startup +ENDPROC(exynos4_secondary_startup) + .align 2 1: .long . .long pen_release diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index 2b11e046d391..0679b8ad2d1e 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -597,7 +597,8 @@ static struct s3c_fb_pd_win origen_fb_win0 = { static struct s3c_fb_platdata origen_lcd_pdata __initdata = { .win[0] = &origen_fb_win0, .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC | + VIDCON1_INV_VCLK, .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, }; diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 60bc45e3e709..683aec786b78 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -24,7 +24,6 @@ #include <asm/cacheflush.h> #include <asm/hardware/gic.h> #include <asm/smp_scu.h> -#include <asm/unified.h> #include <mach/hardware.h> #include <mach/regs-clock.h> @@ -137,7 +136,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) while (time_before(jiffies, timeout)) { smp_rmb(); - __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)), + __raw_writel(virt_to_phys(exynos4_secondary_startup), CPU1_BOOT_REG); gic_raise_softirq(cpumask_of(cpu), 1); @@ -192,6 +191,6 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus) * until it receives a soft interrupt, and then the * secondary CPU branches to this address. */ - __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)), + __raw_writel(virt_to_phys(exynos4_secondary_startup), CPU1_BOOT_REG); } diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 804c4a55f803..7afbe1e55beb 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -25,7 +25,6 @@ #include <linux/smp.h> #include <asm/cacheflush.h> -#include <asm/unified.h> #include <asm/smp_scu.h> #include <asm/hardware/arm_timer.h> #include <asm/hardware/timer-sp.h> @@ -76,7 +75,7 @@ void highbank_set_cpu_jump(int cpu, void *jump_addr) #ifdef CONFIG_SMP cpu = cpu_logical_map(cpu); #endif - writel(BSYM(virt_to_phys(jump_addr)), HB_JUMP_TABLE_VIRT(cpu)); + writel(virt_to_phys(jump_addr), HB_JUMP_TABLE_VIRT(cpu)); __cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16); outer_clean_range(HB_JUMP_TABLE_PHYS(cpu), HB_JUMP_TABLE_PHYS(cpu) + 15); diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 0e6de366c648..09f357bcecde 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -22,6 +22,18 @@ config ARCH_MX25 config MACH_MX27 bool +config ARCH_MX5 + bool + +config ARCH_MX50 + bool + +config ARCH_MX51 + bool + +config ARCH_MX53 + bool + config SOC_IMX1 bool select ARCH_MX1 @@ -73,6 +85,32 @@ config SOC_IMX35 select MXC_AVIC select SMP_ON_UP if SMP +config SOC_IMX5 + select CPU_V7 + select ARM_L1_CACHE_SHIFT_6 + select MXC_TZIC + select ARCH_MXC_IOMUX_V3 + select ARCH_MXC_AUDMUX_V2 + select ARCH_HAS_CPUFREQ + select ARCH_MX5 + bool + +config SOC_IMX50 + bool + select SOC_IMX5 + select ARCH_MX50 + +config SOC_IMX51 + bool + select SOC_IMX5 + select ARCH_MX5 + select ARCH_MX51 + +config SOC_IMX53 + bool + select SOC_IMX5 + select ARCH_MX5 + select ARCH_MX53 if ARCH_IMX_V4_V5 @@ -592,6 +630,207 @@ config MACH_VPR200 Include support for VPR200 platform. This includes specific configurations for the board and its peripherals. +comment "i.MX5 platforms:" + +config MACH_MX50_RDP + bool "Support MX50 reference design platform" + depends on BROKEN + select SOC_IMX50 + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_SPI_IMX + help + Include support for MX50 reference design platform (RDP) board. This + includes specific configurations for the board and its peripherals. + +comment "i.MX51 machines:" + +config MACH_IMX51_DT + bool "Support i.MX51 platforms from device tree" + select SOC_IMX51 + select USE_OF + select MACH_MX51_BABBAGE + help + Include support for Freescale i.MX51 based platforms + using the device tree for discovery + +config MACH_MX51_BABBAGE + bool "Support MX51 BABBAGE platforms" + select SOC_IMX51 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_SPI_IMX + help + Include support for MX51 Babbage platform, also known as MX51EVK in + u-boot. This includes specific configurations for the board and its + peripherals. + +config MACH_MX51_3DS + bool "Support MX51PDK (3DS)" + select SOC_IMX51 + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_KEYPAD + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_SPI_IMX + select MXC_DEBUG_BOARD + help + Include support for MX51PDK (3DS) platform. This includes specific + configurations for the board and its peripherals. + +config MACH_EUKREA_CPUIMX51 + bool "Support Eukrea CPUIMX51 module" + select SOC_IMX51 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SPI_IMX + help + Include support for Eukrea CPUIMX51 platform. This includes + specific configurations for the module and its peripherals. + +choice + prompt "Baseboard" + depends on MACH_EUKREA_CPUIMX51 + default MACH_EUKREA_MBIMX51_BASEBOARD + +config MACH_EUKREA_MBIMX51_BASEBOARD + prompt "Eukrea MBIMX51 development board" + bool + select IMX_HAVE_PLATFORM_IMX_KEYPAD + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select LEDS_GPIO_REGISTER + help + This adds board specific devices that can be found on Eukrea's + MBIMX51 evaluation board. + +endchoice + +config MACH_EUKREA_CPUIMX51SD + bool "Support Eukrea CPUIMX51SD module" + select SOC_IMX51 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SPI_IMX + help + Include support for Eukrea CPUIMX51SD platform. This includes + specific configurations for the module and its peripherals. + +choice + prompt "Baseboard" + depends on MACH_EUKREA_CPUIMX51SD + default MACH_EUKREA_MBIMXSD51_BASEBOARD + +config MACH_EUKREA_MBIMXSD51_BASEBOARD + prompt "Eukrea MBIMXSD development board" + bool + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select LEDS_GPIO_REGISTER + help + This adds board specific devices that can be found on Eukrea's + MBIMXSD evaluation board. + +endchoice + +config MX51_EFIKA_COMMON + bool + select SOC_IMX51 + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_PATA_IMX + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_SPI_IMX + select MXC_ULPI if USB_ULPI + +config MACH_MX51_EFIKAMX + bool "Support MX51 Genesi Efika MX nettop" + select LEDS_GPIO_REGISTER + select MX51_EFIKA_COMMON + help + Include support for Genesi Efika MX nettop. This includes specific + configurations for the board and its peripherals. + +config MACH_MX51_EFIKASB + bool "Support MX51 Genesi Efika Smartbook" + select LEDS_GPIO_REGISTER + select MX51_EFIKA_COMMON + help + Include support for Genesi Efika Smartbook. This includes specific + configurations for the board and its peripherals. + +comment "i.MX53 machines:" + +config MACH_IMX53_DT + bool "Support i.MX53 platforms from device tree" + select SOC_IMX53 + select USE_OF + select MACH_MX53_ARD + select MACH_MX53_EVK + select MACH_MX53_LOCO + select MACH_MX53_SMD + help + Include support for Freescale i.MX53 based platforms + using the device tree for discovery + +config MACH_MX53_EVK + bool "Support MX53 EVK platforms" + select SOC_IMX53 + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_SPI_IMX + select LEDS_GPIO_REGISTER + help + Include support for MX53 EVK platform. This includes specific + configurations for the board and its peripherals. + +config MACH_MX53_SMD + bool "Support MX53 SMD platforms" + select SOC_IMX53 + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + help + Include support for MX53 SMD platform. This includes specific + configurations for the board and its peripherals. + +config MACH_MX53_LOCO + bool "Support MX53 LOCO platforms" + select SOC_IMX53 + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_GPIO_KEYS + select LEDS_GPIO_REGISTER + help + Include support for MX53 LOCO platform. This includes specific + configurations for the board and its peripherals. + +config MACH_MX53_ARD + bool "Support MX53 ARD platforms" + select SOC_IMX53 + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_GPIO_KEYS + help + Include support for MX53 ARD platform. This includes specific + configurations for the board and its peripherals. + comment "i.MX6 family:" config SOC_IMX6Q diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index f5920c24f7d7..55db9c488f2b 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -11,6 +11,8 @@ obj-$(CONFIG_SOC_IMX27) += clock-imx27.o mm-imx27.o ehci-imx27.o obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o +obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clock-mx51-mx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o + # Support for CMOS sensor interface obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o @@ -75,3 +77,22 @@ obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o ifeq ($(CONFIG_PM),y) obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o endif + +# i.MX5 based machines +obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o +obj-$(CONFIG_MACH_MX51_3DS) += mach-mx51_3ds.o +obj-$(CONFIG_MACH_MX53_EVK) += mach-mx53_evk.o +obj-$(CONFIG_MACH_MX53_SMD) += mach-mx53_smd.o +obj-$(CONFIG_MACH_MX53_LOCO) += mach-mx53_loco.o +obj-$(CONFIG_MACH_MX53_ARD) += mach-mx53_ard.o +obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += mach-cpuimx51.o +obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o +obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o +obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o +obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o +obj-$(CONFIG_MACH_MX51_EFIKAMX) += mach-mx51_efikamx.o +obj-$(CONFIG_MACH_MX51_EFIKASB) += mach-mx51_efikasb.o +obj-$(CONFIG_MACH_MX50_RDP) += mach-mx50_rdp.o + +obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o +obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot index 5f4d06af4912..6dfdbcc83afd 100644 --- a/arch/arm/mach-imx/Makefile.boot +++ b/arch/arm/mach-imx/Makefile.boot @@ -22,6 +22,18 @@ zreladdr-$(CONFIG_SOC_IMX35) += 0x80008000 params_phys-$(CONFIG_SOC_IMX35) := 0x80000100 initrd_phys-$(CONFIG_SOC_IMX35) := 0x80800000 +zreladdr-$(CONFIG_SOC_IMX50) += 0x70008000 +params_phys-$(CONFIG_SOC_IMX50) := 0x70000100 +initrd_phys-$(CONFIG_SOC_IMX50) := 0x70800000 + +zreladdr-$(CONFIG_SOC_IMX51) += 0x90008000 +params_phys-$(CONFIG_SOC_IMX51) := 0x90000100 +initrd_phys-$(CONFIG_SOC_IMX51) := 0x90800000 + +zreladdr-$(CONFIG_SOC_IMX53) += 0x70008000 +params_phys-$(CONFIG_SOC_IMX53) := 0x70000100 +initrd_phys-$(CONFIG_SOC_IMX53) := 0x70800000 + zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000 params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100 initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000 diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-imx/clock-mx51-mx53.c index 4cb276977190..08470504a088 100644 --- a/arch/arm/mach-mx5/clock-mx51-mx53.c +++ b/arch/arm/mach-imx/clock-mx51-mx53.c @@ -23,7 +23,7 @@ #include <mach/common.h> #include <mach/clock.h> -#include "crm_regs.h" +#include "crm-regs-imx5.h" /* External clock values passed-in by the board code */ static unsigned long external_high_reference, external_low_reference; diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-imx/cpu-imx5.c index 5e2e7a843860..5e2e7a843860 100644 --- a/arch/arm/mach-mx5/cpu.c +++ b/arch/arm/mach-imx/cpu-imx5.c diff --git a/arch/arm/mach-mx5/cpu_op-mx51.c b/arch/arm/mach-imx/cpu_op-mx51.c index 9d34c3d4c024..9d34c3d4c024 100644 --- a/arch/arm/mach-mx5/cpu_op-mx51.c +++ b/arch/arm/mach-imx/cpu_op-mx51.c diff --git a/arch/arm/mach-mx5/cpu_op-mx51.h b/arch/arm/mach-imx/cpu_op-mx51.h index 97477fecb469..97477fecb469 100644 --- a/arch/arm/mach-mx5/cpu_op-mx51.h +++ b/arch/arm/mach-imx/cpu_op-mx51.h diff --git a/arch/arm/mach-mx5/crm_regs.h b/arch/arm/mach-imx/crm-regs-imx5.h index 5e11ba7daee2..5e11ba7daee2 100644 --- a/arch/arm/mach-mx5/crm_regs.h +++ b/arch/arm/mach-imx/crm-regs-imx5.h diff --git a/arch/arm/mach-mx5/devices-imx50.h b/arch/arm/mach-imx/devices-imx50.h index 7216667eaafc..7216667eaafc 100644 --- a/arch/arm/mach-mx5/devices-imx50.h +++ b/arch/arm/mach-imx/devices-imx50.h diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-imx/devices-imx51.h index af488bc0e225..af488bc0e225 100644 --- a/arch/arm/mach-mx5/devices-imx51.h +++ b/arch/arm/mach-imx/devices-imx51.h diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-imx/devices-imx53.h index 6e1e5d1f8c3a..6e1e5d1f8c3a 100644 --- a/arch/arm/mach-mx5/devices-imx53.h +++ b/arch/arm/mach-imx/devices-imx53.h diff --git a/arch/arm/mach-mx5/efika.h b/arch/arm/mach-imx/efika.h index 014aa985faae..014aa985faae 100644 --- a/arch/arm/mach-mx5/efika.h +++ b/arch/arm/mach-imx/efika.h diff --git a/arch/arm/mach-mx5/ehci.c b/arch/arm/mach-imx/ehci-imx5.c index c17fa131728b..c17fa131728b 100644 --- a/arch/arm/mach-mx5/ehci.c +++ b/arch/arm/mach-imx/ehci-imx5.c diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx51-baseboard.c index a6a3ab8f1b1c..a6a3ab8f1b1c 100644 --- a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx51-baseboard.c diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c index d817fc80b986..d817fc80b986 100644 --- a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c index e6bad17b908c..e6bad17b908c 100644 --- a/arch/arm/mach-mx5/imx51-dt.c +++ b/arch/arm/mach-imx/imx51-dt.c diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-imx/imx53-dt.c index 05ebb3e68679..05ebb3e68679 100644 --- a/arch/arm/mach-mx5/imx53-dt.c +++ b/arch/arm/mach-imx/imx53-dt.c diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-imx/mach-cpuimx51.c index 944025da8333..944025da8333 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-imx/mach-cpuimx51.c diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c index 9fbe923c8b08..9fbe923c8b08 100644 --- a/arch/arm/mach-mx5/board-cpuimx51sd.c +++ b/arch/arm/mach-imx/mach-cpuimx51sd.c diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-imx/mach-mx50_rdp.c index 42b66e8d9615..42b66e8d9615 100644 --- a/arch/arm/mach-mx5/board-mx50_rdp.c +++ b/arch/arm/mach-imx/mach-mx50_rdp.c diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-imx/mach-mx51_3ds.c index 83eab4176ca4..83eab4176ca4 100644 --- a/arch/arm/mach-mx5/board-mx51_3ds.c +++ b/arch/arm/mach-imx/mach-mx51_3ds.c diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c index e4b822e9f719..e4b822e9f719 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-imx/mach-mx51_babbage.c diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-imx/mach-mx51_efikamx.c index 3a5ed2dd885a..3a5ed2dd885a 100644 --- a/arch/arm/mach-mx5/board-mx51_efikamx.c +++ b/arch/arm/mach-imx/mach-mx51_efikamx.c diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-imx/mach-mx51_efikasb.c index ea5f65b0381a..ea5f65b0381a 100644 --- a/arch/arm/mach-mx5/board-mx51_efikasb.c +++ b/arch/arm/mach-imx/mach-mx51_efikasb.c diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-imx/mach-mx53_ard.c index 5f224f1c3eb6..08dfb7628d2d 100644 --- a/arch/arm/mach-mx5/board-mx53_ard.c +++ b/arch/arm/mach-imx/mach-mx53_ard.c @@ -32,7 +32,6 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include "crm_regs.h" #include "devices-imx53.h" #define ARD_ETHERNET_INT_B IMX_GPIO_NR(2, 31) diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-imx/mach-mx53_evk.c index d6ce137896d6..5a72188b9cdb 100644 --- a/arch/arm/mach-mx5/board-mx53_evk.c +++ b/arch/arm/mach-imx/mach-mx53_evk.c @@ -37,7 +37,6 @@ #define EVK_ECSPI1_CS1 IMX_GPIO_NR(3, 19) #define MX53EVK_LED IMX_GPIO_NR(7, 7) -#include "crm_regs.h" #include "devices-imx53.h" static iomux_v3_cfg_t mx53_evk_pads[] = { diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-imx/mach-mx53_loco.c index fd8b524e1c58..37f67cac15a4 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-imx/mach-mx53_loco.c @@ -32,7 +32,6 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include "crm_regs.h" #include "devices-imx53.h" #define MX53_LOCO_POWER IMX_GPIO_NR(1, 8) diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-imx/mach-mx53_smd.c index 22c53c9b18aa..8e972c5c3e13 100644 --- a/arch/arm/mach-mx5/board-mx53_smd.c +++ b/arch/arm/mach-imx/mach-mx53_smd.c @@ -31,7 +31,6 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include "crm_regs.h" #include "devices-imx53.h" #define SMD_FEC_PHY_RST IMX_GPIO_NR(7, 6) diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-imx/mm-imx5.c index bc17dfea3817..bc17dfea3817 100644 --- a/arch/arm/mach-mx5/mm.c +++ b/arch/arm/mach-imx/mm-imx5.c diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-imx/mx51_efika.c index ec6ca91b299b..ec6ca91b299b 100644 --- a/arch/arm/mach-mx5/mx51_efika.c +++ b/arch/arm/mach-imx/mx51_efika.c diff --git a/arch/arm/mach-mx5/system.c b/arch/arm/mach-imx/pm-imx5.c index 5eebfaad1226..6dc093448057 100644 --- a/arch/arm/mach-mx5/system.c +++ b/arch/arm/mach-imx/pm-imx5.c @@ -1,8 +1,6 @@ /* - * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License * Version 2 or later at the following locations: @@ -10,14 +8,22 @@ * http://www.opensource.org/licenses/gpl-license.html * http://www.gnu.org/copyleft/gpl.html */ -#include <linux/platform_device.h> +#include <linux/suspend.h> +#include <linux/clk.h> #include <linux/io.h> -#include <mach/hardware.h> +#include <linux/err.h> +#include <asm/cacheflush.h> +#include <asm/tlbflush.h> #include <mach/common.h> -#include "crm_regs.h" +#include <mach/hardware.h> +#include "crm-regs-imx5.h" + +static struct clk *gpc_dvfs_clk; -/* set cpu low power mode before WFI instruction. This function is called - * mx5 because it can be used for mx50, mx51, and mx53.*/ +/* + * set cpu low power mode before WFI instruction. This function is called + * mx5 because it can be used for mx50, mx51, and mx53. + */ void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode) { u32 plat_lpc, arm_srpgcr, ccm_clpcr; @@ -80,3 +86,68 @@ void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode) __raw_writel(empgc1, MXC_SRPG_EMPGC1_SRPGCR); } } + +static int mx5_suspend_prepare(void) +{ + return clk_enable(gpc_dvfs_clk); +} + +static int mx5_suspend_enter(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_MEM: + mx5_cpu_lp_set(STOP_POWER_OFF); + break; + case PM_SUSPEND_STANDBY: + mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); + break; + default: + return -EINVAL; + } + + if (state == PM_SUSPEND_MEM) { + local_flush_tlb_all(); + flush_cache_all(); + + /*clear the EMPGC0/1 bits */ + __raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR); + __raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR); + } + cpu_do_idle(); + return 0; +} + +static void mx5_suspend_finish(void) +{ + clk_disable(gpc_dvfs_clk); +} + +static int mx5_pm_valid(suspend_state_t state) +{ + return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX); +} + +static const struct platform_suspend_ops mx5_suspend_ops = { + .valid = mx5_pm_valid, + .prepare = mx5_suspend_prepare, + .enter = mx5_suspend_enter, + .finish = mx5_suspend_finish, +}; + +static int __init mx5_pm_init(void) +{ + if (!cpu_is_mx51() && !cpu_is_mx53()) + return 0; + + if (gpc_dvfs_clk == NULL) + gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs"); + + if (!IS_ERR(gpc_dvfs_clk)) { + if (cpu_is_mx51()) + suspend_set_ops(&mx5_suspend_ops); + } else + return -EPERM; + + return 0; +} +device_initcall(mx5_pm_init); diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c index 4bde04f99e38..29bd1243781e 100644 --- a/arch/arm/mach-imx/src.c +++ b/arch/arm/mach-imx/src.c @@ -15,7 +15,6 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/smp.h> -#include <asm/unified.h> #define SRC_SCR 0x000 #define SRC_GPR1 0x020 @@ -43,7 +42,7 @@ void imx_enable_cpu(int cpu, bool enable) void imx_set_cpu_jump(int cpu, void *jump_addr) { cpu = cpu_logical_map(cpu); - writel_relaxed(BSYM(virt_to_phys(jump_addr)), + writel_relaxed(virt_to_phys(jump_addr), src_base + SRC_GPR1 + cpu * 8); } diff --git a/arch/arm/mach-msm/headsmp.S b/arch/arm/mach-msm/headsmp.S index 0c631a9f8647..bcd5af223dea 100644 --- a/arch/arm/mach-msm/headsmp.S +++ b/arch/arm/mach-msm/headsmp.S @@ -34,6 +34,7 @@ pen: ldr r7, [r6] * should now contain the SVC stack for this core */ b secondary_startup +ENDPROC(msm_secondary_startup) .align 1: .long . diff --git a/arch/arm/mach-msm/vreg.c b/arch/arm/mach-msm/vreg.c index a9103bc6615f..bd66ed04d6dc 100644 --- a/arch/arm/mach-msm/vreg.c +++ b/arch/arm/mach-msm/vreg.c @@ -19,6 +19,7 @@ #include <linux/device.h> #include <linux/init.h> #include <linux/debugfs.h> +#include <linux/module.h> #include <linux/string.h> #include <mach/vreg.h> diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig deleted file mode 100644 index af0c212e3c7b..000000000000 --- a/arch/arm/mach-mx5/Kconfig +++ /dev/null @@ -1,244 +0,0 @@ -if ARCH_MX5 - -# ARCH_MX5/50/53 are left to mark places where prevent multi-soc in single -# image. So for most time, SOC_IMX50/51/53 should be used. - -config ARCH_MX51 - bool - -config ARCH_MX50 - bool - -config ARCH_MX53 - bool - -config SOC_IMX50 - bool - select CPU_V7 - select ARM_L1_CACHE_SHIFT_6 - select MXC_TZIC - select ARCH_MXC_IOMUX_V3 - select ARCH_MXC_AUDMUX_V2 - select ARCH_HAS_CPUFREQ - select ARCH_MX50 - -config SOC_IMX51 - bool - select CPU_V7 - select ARM_L1_CACHE_SHIFT_6 - select MXC_TZIC - select ARCH_MXC_IOMUX_V3 - select ARCH_MXC_AUDMUX_V2 - select ARCH_HAS_CPUFREQ - select ARCH_MX51 - -config SOC_IMX53 - bool - select CPU_V7 - select ARM_L1_CACHE_SHIFT_6 - select MXC_TZIC - select ARCH_MXC_IOMUX_V3 - select ARCH_MX53 - -#comment "i.MX50 machines:" - -config MACH_MX50_RDP - bool "Support MX50 reference design platform" - depends on BROKEN - select SOC_IMX50 - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - help - Include support for MX50 reference design platform (RDP) board. This - includes specific configurations for the board and its peripherals. - -comment "i.MX51 machines:" - -config MACH_IMX51_DT - bool "Support i.MX51 platforms from device tree" - select SOC_IMX51 - select USE_OF - select MACH_MX51_BABBAGE - help - Include support for Freescale i.MX51 based platforms - using the device tree for discovery - -config MACH_MX51_BABBAGE - bool "Support MX51 BABBAGE platforms" - select SOC_IMX51 - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - help - Include support for MX51 Babbage platform, also known as MX51EVK in - u-boot. This includes specific configurations for the board and its - peripherals. - -config MACH_MX51_3DS - bool "Support MX51PDK (3DS)" - select SOC_IMX51 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_KEYPAD - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - select MXC_DEBUG_BOARD - help - Include support for MX51PDK (3DS) platform. This includes specific - configurations for the board and its peripherals. - -config MACH_EUKREA_CPUIMX51 - bool "Support Eukrea CPUIMX51 module" - select SOC_IMX51 - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SPI_IMX - help - Include support for Eukrea CPUIMX51 platform. This includes - specific configurations for the module and its peripherals. - -choice - prompt "Baseboard" - depends on MACH_EUKREA_CPUIMX51 - default MACH_EUKREA_MBIMX51_BASEBOARD - -config MACH_EUKREA_MBIMX51_BASEBOARD - prompt "Eukrea MBIMX51 development board" - bool - select IMX_HAVE_PLATFORM_IMX_KEYPAD - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select LEDS_GPIO_REGISTER - help - This adds board specific devices that can be found on Eukrea's - MBIMX51 evaluation board. - -endchoice - -config MACH_EUKREA_CPUIMX51SD - bool "Support Eukrea CPUIMX51SD module" - select SOC_IMX51 - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SPI_IMX - help - Include support for Eukrea CPUIMX51SD platform. This includes - specific configurations for the module and its peripherals. - -choice - prompt "Baseboard" - depends on MACH_EUKREA_CPUIMX51SD - default MACH_EUKREA_MBIMXSD51_BASEBOARD - -config MACH_EUKREA_MBIMXSD51_BASEBOARD - prompt "Eukrea MBIMXSD development board" - bool - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select LEDS_GPIO_REGISTER - help - This adds board specific devices that can be found on Eukrea's - MBIMXSD evaluation board. - -endchoice - -config MX51_EFIKA_COMMON - bool - select SOC_IMX51 - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_PATA_IMX - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - select MXC_ULPI if USB_ULPI - -config MACH_MX51_EFIKAMX - bool "Support MX51 Genesi Efika MX nettop" - select LEDS_GPIO_REGISTER - select MX51_EFIKA_COMMON - help - Include support for Genesi Efika MX nettop. This includes specific - configurations for the board and its peripherals. - -config MACH_MX51_EFIKASB - bool "Support MX51 Genesi Efika Smartbook" - select LEDS_GPIO_REGISTER - select MX51_EFIKA_COMMON - help - Include support for Genesi Efika Smartbook. This includes specific - configurations for the board and its peripherals. - -comment "i.MX53 machines:" - -config MACH_IMX53_DT - bool "Support i.MX53 platforms from device tree" - select SOC_IMX53 - select USE_OF - select MACH_MX53_ARD - select MACH_MX53_EVK - select MACH_MX53_LOCO - select MACH_MX53_SMD - help - Include support for Freescale i.MX53 based platforms - using the device tree for discovery - -config MACH_MX53_EVK - bool "Support MX53 EVK platforms" - select SOC_IMX53 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - select LEDS_GPIO_REGISTER - help - Include support for MX53 EVK platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX53_SMD - bool "Support MX53 SMD platforms" - select SOC_IMX53 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - help - Include support for MX53 SMD platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX53_LOCO - bool "Support MX53 LOCO platforms" - select SOC_IMX53 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_GPIO_KEYS - select LEDS_GPIO_REGISTER - help - Include support for MX53 LOCO platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX53_ARD - bool "Support MX53 ARD platforms" - select SOC_IMX53 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_GPIO_KEYS - help - Include support for MX53 ARD platform. This includes specific - configurations for the board and its peripherals. - -endif diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile deleted file mode 100644 index 0fc60807fa2b..000000000000 --- a/arch/arm/mach-mx5/Makefile +++ /dev/null @@ -1,26 +0,0 @@ -# -# Makefile for the linux kernel. -# - -# Object file lists. -obj-y := cpu.o mm.o clock-mx51-mx53.o ehci.o system.o - -obj-$(CONFIG_PM) += pm-imx5.o -obj-$(CONFIG_CPU_FREQ_IMX) += cpu_op-mx51.o -obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o -obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o -obj-$(CONFIG_MACH_MX53_EVK) += board-mx53_evk.o -obj-$(CONFIG_MACH_MX53_SMD) += board-mx53_smd.o -obj-$(CONFIG_MACH_MX53_LOCO) += board-mx53_loco.o -obj-$(CONFIG_MACH_MX53_ARD) += board-mx53_ard.o -obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o -obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o -obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o -obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o -obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o -obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o -obj-$(CONFIG_MACH_MX51_EFIKASB) += board-mx51_efikasb.o -obj-$(CONFIG_MACH_MX50_RDP) += board-mx50_rdp.o - -obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o -obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o diff --git a/arch/arm/mach-mx5/Makefile.boot b/arch/arm/mach-mx5/Makefile.boot deleted file mode 100644 index ca207ca305ec..000000000000 --- a/arch/arm/mach-mx5/Makefile.boot +++ /dev/null @@ -1,9 +0,0 @@ - zreladdr-$(CONFIG_ARCH_MX50) += 0x70008000 -params_phys-$(CONFIG_ARCH_MX50) := 0x70000100 -initrd_phys-$(CONFIG_ARCH_MX50) := 0x70800000 - zreladdr-$(CONFIG_ARCH_MX51) += 0x90008000 -params_phys-$(CONFIG_ARCH_MX51) := 0x90000100 -initrd_phys-$(CONFIG_ARCH_MX51) := 0x90800000 - zreladdr-$(CONFIG_ARCH_MX53) += 0x70008000 -params_phys-$(CONFIG_ARCH_MX53) := 0x70000100 -initrd_phys-$(CONFIG_ARCH_MX53) := 0x70800000 diff --git a/arch/arm/mach-mx5/pm-imx5.c b/arch/arm/mach-mx5/pm-imx5.c deleted file mode 100644 index 98052fc852c7..000000000000 --- a/arch/arm/mach-mx5/pm-imx5.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ -#include <linux/suspend.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/err.h> -#include <asm/cacheflush.h> -#include <asm/tlbflush.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include "crm_regs.h" - -static struct clk *gpc_dvfs_clk; - -static int mx5_suspend_prepare(void) -{ - return clk_enable(gpc_dvfs_clk); -} - -static int mx5_suspend_enter(suspend_state_t state) -{ - switch (state) { - case PM_SUSPEND_MEM: - mx5_cpu_lp_set(STOP_POWER_OFF); - break; - case PM_SUSPEND_STANDBY: - mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); - break; - default: - return -EINVAL; - } - - if (state == PM_SUSPEND_MEM) { - local_flush_tlb_all(); - flush_cache_all(); - - /*clear the EMPGC0/1 bits */ - __raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR); - __raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR); - } - cpu_do_idle(); - return 0; -} - -static void mx5_suspend_finish(void) -{ - clk_disable(gpc_dvfs_clk); -} - -static int mx5_pm_valid(suspend_state_t state) -{ - return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX); -} - -static const struct platform_suspend_ops mx5_suspend_ops = { - .valid = mx5_pm_valid, - .prepare = mx5_suspend_prepare, - .enter = mx5_suspend_enter, - .finish = mx5_suspend_finish, -}; - -static int __init mx5_pm_init(void) -{ - if (gpc_dvfs_clk == NULL) - gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs"); - - if (!IS_ERR(gpc_dvfs_clk)) { - if (cpu_is_mx51()) - suspend_set_ops(&mx5_suspend_ops); - } else - return -EPERM; - - return 0; -} -device_initcall(mx5_pm_init); diff --git a/arch/arm/mach-picoxcell/time.c b/arch/arm/mach-picoxcell/time.c index 6c89cf8ab22e..2ecba6743b8e 100644 --- a/arch/arm/mach-picoxcell/time.c +++ b/arch/arm/mach-picoxcell/time.c @@ -67,7 +67,7 @@ static void picoxcell_add_clocksource(struct device_node *source_timer) static void __iomem *sched_io_base; -unsigned u32 notrace picoxcell_read_sched_clock(void) +static u32 picoxcell_read_sched_clock(void) { return __raw_readl(sched_io_base); } diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index e83c654a58d0..17c878ddbc70 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -17,7 +17,6 @@ #include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <asm/smp_scu.h> -#include <asm/unified.h> #include <mach/board-eb.h> #include <mach/board-pb11mp.h> @@ -75,6 +74,6 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus) * until it receives a soft interrupt, and then the * secondary CPU branches to this address. */ - __raw_writel(BSYM(virt_to_phys(versatile_secondary_startup)), + __raw_writel(virt_to_phys(versatile_secondary_startup), __io_address(REALVIEW_SYS_FLAGSSET)); } diff --git a/arch/arm/mach-s3c64xx/include/mach/crag6410.h b/arch/arm/mach-s3c64xx/include/mach/crag6410.h index 5d55ab018b6b..4cb2f951f1e9 100644 --- a/arch/arm/mach-s3c64xx/include/mach/crag6410.h +++ b/arch/arm/mach-s3c64xx/include/mach/crag6410.h @@ -21,5 +21,6 @@ #define CODEC_GPIO_BASE (GPIO_BOARD_START + 8) #define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 32) #define BANFF_PMIC_GPIO_BASE (GPIO_BOARD_START + 64) +#define MMGPIO_GPIO_BASE (GPIO_BOARD_START + 96) #endif diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 1cc91d794c97..8077f650eb0e 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -260,6 +260,7 @@ static struct platform_device crag6410_dm9k_device = { static struct resource crag6410_mmgpio_resource[] = { [0] = { + .name = "dat", .start = S3C64XX_PA_XM0CSN4 + 1, .end = S3C64XX_PA_XM0CSN4 + 1, .flags = IORESOURCE_MEM, @@ -272,7 +273,7 @@ static struct platform_device crag6410_mmgpio = { .resource = crag6410_mmgpio_resource, .num_resources = ARRAY_SIZE(crag6410_mmgpio_resource), .dev.platform_data = &(struct bgpio_pdata) { - .base = -1, + .base = MMGPIO_GPIO_BASE, }, }; @@ -328,7 +329,6 @@ static struct platform_device wallvdd_device = { static struct platform_device *crag6410_devices[] __initdata = { &s3c_device_hsmmc0, - &s3c_device_hsmmc1, &s3c_device_hsmmc2, &s3c_device_i2c0, &s3c_device_i2c1, @@ -355,7 +355,7 @@ static struct platform_device *crag6410_devices[] __initdata = { static struct pca953x_platform_data crag6410_pca_data = { .gpio_base = PCA935X_GPIO_BASE, - .irq_base = 0, + .irq_base = -1, }; /* VDDARM is controlled by DVS1 connected to GPK(0) */ @@ -683,12 +683,6 @@ static struct s3c_sdhci_platdata crag6410_hsmmc2_pdata = { .cd_type = S3C_SDHCI_CD_PERMANENT, }; -static struct s3c_sdhci_platdata crag6410_hsmmc1_pdata = { - .max_width = 4, - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = S3C64XX_GPF(11), -}; - static void crag6410_cfg_sdhci0(struct platform_device *dev, int width) { /* Set all the necessary GPG pins to special-function 2 */ @@ -723,7 +717,6 @@ static void __init crag6410_machine_init(void) gpio_direction_output(S3C64XX_GPF(10), 1); s3c_sdhci0_set_platdata(&crag6410_hsmmc0_pdata); - s3c_sdhci1_set_platdata(&crag6410_hsmmc1_pdata); s3c_sdhci2_set_platdata(&crag6410_hsmmc2_pdata); s3c_i2c0_set_platdata(&i2c0_pdata); diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index 055dac90e0e2..7d3e81b9dd06 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -346,23 +346,10 @@ int __init s3c64xx_pm_init(void) static __init int s3c64xx_pm_initcall(void) { - u32 val; - pm_cpu_prep = s3c64xx_pm_prepare; pm_cpu_sleep = s3c64xx_cpu_suspend; pm_uart_udivslot = 1; - /* - * Unconditionally disable power domains that contain only - * blocks which have no mainline driver support. - */ - val = __raw_readl(S3C64XX_NORMAL_CFG); - val &= ~(S3C64XX_NORMALCFG_DOMAIN_G_ON | - S3C64XX_NORMALCFG_DOMAIN_V_ON | - S3C64XX_NORMALCFG_DOMAIN_I_ON | - S3C64XX_NORMALCFG_DOMAIN_P_ON); - __raw_writel(val, S3C64XX_NORMAL_CFG); - #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK gpio_request(S3C64XX_GPN(12), "DEBUG_LED0"); gpio_request(S3C64XX_GPN(13), "DEBUG_LED1"); diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 1ea89be63e29..6fcf304d3cdf 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -445,31 +445,39 @@ static const struct sh_dmae_slave_config sh7372_dmae_slaves[] = { }, }; +#define SH7372_CHCLR 0x220 + static const struct sh_dmae_channel sh7372_dmae_channels[] = { { .offset = 0, .dmars = 0, .dmars_bit = 0, + .chclr_offset = SH7372_CHCLR + 0, }, { .offset = 0x10, .dmars = 0, .dmars_bit = 8, + .chclr_offset = SH7372_CHCLR + 0x10, }, { .offset = 0x20, .dmars = 4, .dmars_bit = 0, + .chclr_offset = SH7372_CHCLR + 0x20, }, { .offset = 0x30, .dmars = 4, .dmars_bit = 8, + .chclr_offset = SH7372_CHCLR + 0x30, }, { .offset = 0x50, .dmars = 8, .dmars_bit = 0, + .chclr_offset = SH7372_CHCLR + 0x50, }, { .offset = 0x60, .dmars = 8, .dmars_bit = 8, + .chclr_offset = SH7372_CHCLR + 0x60, } }; @@ -487,6 +495,7 @@ static struct sh_dmae_pdata dma_platform_data = { .ts_shift = ts_shift, .ts_shift_num = ARRAY_SIZE(ts_shift), .dmaor_init = DMAOR_DME, + .chclr_present = 1, }; /* Resource order important! */ @@ -494,7 +503,7 @@ static struct resource sh7372_dmae0_resources[] = { { /* Channel registers and DMAOR */ .start = 0xfe008020, - .end = 0xfe00808f, + .end = 0xfe00828f, .flags = IORESOURCE_MEM, }, { @@ -522,7 +531,7 @@ static struct resource sh7372_dmae1_resources[] = { { /* Channel registers and DMAOR */ .start = 0xfe018020, - .end = 0xfe01808f, + .end = 0xfe01828f, .flags = IORESOURCE_MEM, }, { @@ -550,7 +559,7 @@ static struct resource sh7372_dmae2_resources[] = { { /* Channel registers and DMAOR */ .start = 0xfe028020, - .end = 0xfe02808f, + .end = 0xfe02828f, .flags = IORESOURCE_MEM, }, { diff --git a/arch/arm/mach-ux500/headsmp.S b/arch/arm/mach-ux500/headsmp.S index 64fa451edcfd..08da5589bcd8 100644 --- a/arch/arm/mach-ux500/headsmp.S +++ b/arch/arm/mach-ux500/headsmp.S @@ -32,6 +32,8 @@ pen: ldr r7, [r6] * should now contain the SVC stack for this core */ b secondary_startup +ENDPROC(u8500_secondary_startup) + .align 2 1: .long . .long pen_release diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c index 2b5f7ac001a3..124ffb169093 100644 --- a/arch/arm/mach-vexpress/platsmp.c +++ b/arch/arm/mach-vexpress/platsmp.c @@ -13,8 +13,6 @@ #include <linux/smp.h> #include <linux/io.h> -#include <asm/unified.h> - #include <mach/motherboard.h> #define V2M_PA_CS7 0x10000000 @@ -46,6 +44,6 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus) * secondary CPU branches to this address. */ writel(~0, MMIO_P2V(V2M_SYS_FLAGSCLR)); - writel(BSYM(virt_to_phys(versatile_secondary_startup)), + writel(virt_to_phys(versatile_secondary_startup), MMIO_P2V(V2M_SYS_FLAGSSET)); } diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index b30708e28c1d..dcebb1230f7f 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -17,26 +17,17 @@ config ARCH_IMX_V4_V5 and ARMv5 SoCs config ARCH_IMX_V6_V7 - bool "i.MX3, i.MX6" + bool "i.MX3, i.MX5, i.MX6" select AUTO_ZRELADDR if !ZBOOT_ROM select ARM_PATCH_PHYS_VIRT select MIGHT_HAVE_CACHE_L2X0 help - This enables support for systems based on the Freescale i.MX3 and i.MX6 - family. - -config ARCH_MX5 - bool "i.MX50, i.MX51, i.MX53" - select AUTO_ZRELADDR if !ZBOOT_ROM - select ARM_PATCH_PHYS_VIRT - help - This enables support for machines using Freescale's i.MX50 and i.MX53 - processors. + This enables support for systems based on the Freescale i.MX3, i.MX5 + and i.MX6 family. endchoice source "arch/arm/mach-imx/Kconfig" -source "arch/arm/mach-mx5/Kconfig" endmenu diff --git a/arch/arm/plat-mxc/include/mach/mx3fb.h b/arch/arm/plat-mxc/include/mach/mx3fb.h index ac24c5c4bc83..fdbe60001542 100644 --- a/arch/arm/plat-mxc/include/mach/mx3fb.h +++ b/arch/arm/plat-mxc/include/mach/mx3fb.h @@ -22,6 +22,20 @@ #define FB_SYNC_SWAP_RGB 0x04000000 #define FB_SYNC_CLK_SEL_EN 0x02000000 +/* + * Specify the way your display is connected. The IPU can arbitrarily + * map the internal colors to the external data lines. We only support + * the following mappings at the moment. + */ +enum disp_data_mapping { + /* blue -> d[0..5], green -> d[6..11], red -> d[12..17] */ + IPU_DISP_DATA_MAPPING_RGB666, + /* blue -> d[0..4], green -> d[5..10], red -> d[11..15] */ + IPU_DISP_DATA_MAPPING_RGB565, + /* blue -> d[0..7], green -> d[8..15], red -> d[16..23] */ + IPU_DISP_DATA_MAPPING_RGB888, +}; + /** * struct mx3fb_platform_data - mx3fb platform data * @@ -33,6 +47,7 @@ struct mx3fb_platform_data { const char *name; const struct fb_videomode *mode; int num_modes; + enum disp_data_mapping disp_data_fmt; }; #endif diff --git a/arch/arm/plat-nomadik/include/plat/ste_dma40.h b/arch/arm/plat-nomadik/include/plat/ste_dma40.h index 685c78716d95..fd0ee84c45d1 100644 --- a/arch/arm/plat-nomadik/include/plat/ste_dma40.h +++ b/arch/arm/plat-nomadik/include/plat/ste_dma40.h @@ -113,7 +113,8 @@ struct stedma40_half_channel_info { * @dst_dev_type: Dst device type * @src_info: Parameters for dst half channel * @dst_info: Parameters for dst half channel - * + * @use_fixed_channel: if true, use physical channel specified by phy_channel + * @phy_channel: physical channel to use, only if use_fixed_channel is true * * This structure has to be filled by the client drivers. * It is recommended to do all dma configurations for clients in the machine. @@ -129,6 +130,9 @@ struct stedma40_chan_cfg { int dst_dev_type; struct stedma40_half_channel_info src_info; struct stedma40_half_channel_info dst_info; + + bool use_fixed_channel; + int phy_channel; }; /** @@ -153,6 +157,7 @@ struct stedma40_platform_data { struct stedma40_chan_cfg *memcpy_conf_phy; struct stedma40_chan_cfg *memcpy_conf_log; int disabled_channels[STEDMA40_MAX_PHYS]; + bool use_esram_lcla; }; #ifdef CONFIG_STE_DMA40 @@ -187,7 +192,7 @@ static inline struct dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, dma_addr_t addr, unsigned int size, - enum dma_data_direction direction, + enum dma_transfer_direction direction, unsigned long flags) { struct scatterlist sg; @@ -209,7 +214,7 @@ static inline struct dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, dma_addr_t addr, unsigned int size, - enum dma_data_direction direction, + enum dma_transfer_direction direction, unsigned long flags) { return NULL; diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c index 2cded872f22b..0747c77a2fd5 100644 --- a/arch/arm/plat-samsung/dma-ops.c +++ b/arch/arm/plat-samsung/dma-ops.c @@ -37,14 +37,14 @@ static unsigned samsung_dmadev_request(enum dma_ch dma_ch, (void *)dma_ch; chan = dma_request_channel(mask, pl330_filter, filter_param); - if (info->direction == DMA_FROM_DEVICE) { + if (info->direction == DMA_DEV_TO_MEM) { memset(&slave_config, 0, sizeof(struct dma_slave_config)); slave_config.direction = info->direction; slave_config.src_addr = info->fifo; slave_config.src_addr_width = info->width; slave_config.src_maxburst = 1; dmaengine_slave_config(chan, &slave_config); - } else if (info->direction == DMA_TO_DEVICE) { + } else if (info->direction == DMA_MEM_TO_DEV) { memset(&slave_config, 0, sizeof(struct dma_slave_config)); slave_config.direction = info->direction; slave_config.dst_addr = info->fifo; diff --git a/arch/arm/plat-samsung/include/plat/dma-ops.h b/arch/arm/plat-samsung/include/plat/dma-ops.h index 22eafc310bd7..71a6827c7706 100644 --- a/arch/arm/plat-samsung/include/plat/dma-ops.h +++ b/arch/arm/plat-samsung/include/plat/dma-ops.h @@ -14,10 +14,11 @@ #define __SAMSUNG_DMA_OPS_H_ __FILE__ #include <linux/dmaengine.h> +#include <mach/dma.h> struct samsung_dma_prep_info { enum dma_transaction_type cap; - enum dma_data_direction direction; + enum dma_transfer_direction direction; dma_addr_t buf; unsigned long period; unsigned long len; @@ -27,7 +28,7 @@ struct samsung_dma_prep_info { struct samsung_dma_info { enum dma_transaction_type cap; - enum dma_data_direction direction; + enum dma_transfer_direction direction; enum dma_slave_buswidth width; dma_addr_t fifo; struct s3c2410_dma_client *client; diff --git a/arch/arm/plat-samsung/include/plat/dma.h b/arch/arm/plat-samsung/include/plat/dma.h index b9061128abde..7b02143ccd9a 100644 --- a/arch/arm/plat-samsung/include/plat/dma.h +++ b/arch/arm/plat-samsung/include/plat/dma.h @@ -10,6 +10,9 @@ * published by the Free Software Foundation. */ +#ifndef __PLAT_DMA_H +#define __PLAT_DMA_H + #include <linux/dma-mapping.h> enum s3c2410_dma_buffresult { @@ -122,5 +125,6 @@ extern int s3c2410_dma_getposition(enum dma_ch channel, extern int s3c2410_dma_set_opfn(enum dma_ch, s3c2410_dma_opfn_t rtn); extern int s3c2410_dma_set_buffdone_fn(enum dma_ch, s3c2410_dma_cbfn_t rtn); - #include <plat/dma-ops.h> + +#endif diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h index aea68b60ef98..fa95e9a00972 100644 --- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h +++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h @@ -11,6 +11,8 @@ #ifndef __S3C64XX_PLAT_SPI_H #define __S3C64XX_PLAT_SPI_H +struct platform_device; + /** * struct s3c64xx_spi_csinfo - ChipSelect description * @fb_delay: Slave specific feedback delay. diff --git a/arch/arm/plat-versatile/headsmp.S b/arch/arm/plat-versatile/headsmp.S index d397a1fb2f54..dd703ef09b8d 100644 --- a/arch/arm/plat-versatile/headsmp.S +++ b/arch/arm/plat-versatile/headsmp.S @@ -38,3 +38,4 @@ pen: ldr r7, [r6] .align 1: .long . .long pen_release +ENDPROC(versatile_secondary_startup) diff --git a/arch/ia64/include/asm/ptrace.h b/arch/ia64/include/asm/ptrace.h index f5cb27614e35..68c98f5b3ca6 100644 --- a/arch/ia64/include/asm/ptrace.h +++ b/arch/ia64/include/asm/ptrace.h @@ -246,7 +246,18 @@ static inline unsigned long user_stack_pointer(struct pt_regs *regs) return regs->ar_bspstore; } -#define regs_return_value(regs) ((regs)->r8) +static inline int is_syscall_success(struct pt_regs *regs) +{ + return regs->r10 != -1; +} + +static inline long regs_return_value(struct pt_regs *regs) +{ + if (is_syscall_success(regs)) + return regs->r8; + else + return -regs->r8; +} /* Conserve space in histogram by encoding slot bits in address * bits 2 and 3 rather than bits 0 and 1. diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index bfb4d01e0e51..5207035dc061 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -429,22 +429,24 @@ static u32 __devinitdata pxm_flag[PXM_FLAG_LEN]; static struct acpi_table_slit __initdata *slit_table; cpumask_t early_cpu_possible_map = CPU_MASK_NONE; -static int get_processor_proximity_domain(struct acpi_srat_cpu_affinity *pa) +static int __init +get_processor_proximity_domain(struct acpi_srat_cpu_affinity *pa) { int pxm; pxm = pa->proximity_domain_lo; - if (ia64_platform_is("sn2")) + if (ia64_platform_is("sn2") || acpi_srat_revision >= 2) pxm += pa->proximity_domain_hi[0] << 8; return pxm; } -static int get_memory_proximity_domain(struct acpi_srat_mem_affinity *ma) +static int __init +get_memory_proximity_domain(struct acpi_srat_mem_affinity *ma) { int pxm; pxm = ma->proximity_domain; - if (!ia64_platform_is("sn2")) + if (!ia64_platform_is("sn2") && acpi_srat_revision <= 1) pxm &= 0xff; return pxm; diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c index 8848f43d819e..dad91661ddf9 100644 --- a/arch/ia64/kernel/ptrace.c +++ b/arch/ia64/kernel/ptrace.c @@ -1246,15 +1246,8 @@ syscall_trace_enter (long arg0, long arg1, long arg2, long arg3, if (test_thread_flag(TIF_RESTORE_RSE)) ia64_sync_krbs(); - if (unlikely(current->audit_context)) { - long syscall; - int arch; - syscall = regs.r15; - arch = AUDIT_ARCH_IA64; - - audit_syscall_entry(arch, syscall, arg0, arg1, arg2, arg3); - } + audit_syscall_entry(AUDIT_ARCH_IA64, regs.r15, arg0, arg1, arg2, arg3); return 0; } @@ -1268,14 +1261,7 @@ syscall_trace_leave (long arg0, long arg1, long arg2, long arg3, { int step; - if (unlikely(current->audit_context)) { - int success = AUDITSC_RESULT(regs.r10); - long result = regs.r8; - - if (success != AUDITSC_SUCCESS) - result = -result; - audit_syscall_exit(success, result); - } + audit_syscall_exit(®s); step = test_thread_flag(TIF_SINGLESTEP); if (step || test_thread_flag(TIF_SYSCALL_TRACE)) diff --git a/arch/microblaze/include/asm/ptrace.h b/arch/microblaze/include/asm/ptrace.h index 816bee64b196..94e92c805859 100644 --- a/arch/microblaze/include/asm/ptrace.h +++ b/arch/microblaze/include/asm/ptrace.h @@ -61,6 +61,11 @@ struct pt_regs { #define instruction_pointer(regs) ((regs)->pc) #define profile_pc(regs) instruction_pointer(regs) +static inline long regs_return_value(struct pt_regs *regs) +{ + return regs->r3; +} + #else /* __KERNEL__ */ /* pt_regs offsets used by gdbserver etc in ptrace syscalls */ diff --git a/arch/microblaze/kernel/ptrace.c b/arch/microblaze/kernel/ptrace.c index 043cb58f9c44..6eb2aa927d89 100644 --- a/arch/microblaze/kernel/ptrace.c +++ b/arch/microblaze/kernel/ptrace.c @@ -147,10 +147,8 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs) */ ret = -1L; - if (unlikely(current->audit_context)) - audit_syscall_entry(EM_MICROBLAZE, regs->r12, - regs->r5, regs->r6, - regs->r7, regs->r8); + audit_syscall_entry(EM_MICROBLAZE, regs->r12, regs->r5, regs->r6, + regs->r7, regs->r8); return ret ?: regs->r12; } @@ -159,8 +157,7 @@ asmlinkage void do_syscall_trace_leave(struct pt_regs *regs) { int step; - if (unlikely(current->audit_context)) - audit_syscall_exit(AUDITSC_RESULT(regs->r3), regs->r3); + audit_syscall_exit(regs); step = test_thread_flag(TIF_SINGLESTEP); if (step || test_thread_flag(TIF_SYSCALL_TRACE)) diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c index 604cd9dd1333..d4fc1a971779 100644 --- a/arch/microblaze/kernel/setup.c +++ b/arch/microblaze/kernel/setup.c @@ -26,6 +26,7 @@ #include <linux/cache.h> #include <linux/of_platform.h> #include <linux/dma-mapping.h> +#include <linux/cpu.h> #include <asm/cacheflush.h> #include <asm/entry.h> #include <asm/cpuinfo.h> @@ -226,5 +227,23 @@ static int __init setup_bus_notifier(void) return 0; } - arch_initcall(setup_bus_notifier); + +static DEFINE_PER_CPU(struct cpu, cpu_devices); + +static int __init topology_init(void) +{ + int i, ret; + + for_each_present_cpu(i) { + struct cpu *c = &per_cpu(cpu_devices, i); + + ret = register_cpu(c, i); + if (ret) + printk(KERN_WARNING "topology_init: register_cpu %d " + "failed (%d)\n", i, ret); + } + + return 0; +} +subsys_initcall(topology_init); diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h index 7b99c670e478..4b7f5252d2fd 100644 --- a/arch/mips/include/asm/ptrace.h +++ b/arch/mips/include/asm/ptrace.h @@ -137,7 +137,19 @@ extern int ptrace_set_watch_regs(struct task_struct *child, */ #define user_mode(regs) (((regs)->cp0_status & KU_MASK) == KU_USER) -#define regs_return_value(_regs) ((_regs)->regs[2]) +static inline int is_syscall_success(struct pt_regs *regs) +{ + return !regs->regs[7]; +} + +static inline long regs_return_value(struct pt_regs *regs) +{ + if (is_syscall_success(regs)) + return regs->regs[2]; + else + return -regs->regs[2]; +} + #define instruction_pointer(regs) ((regs)->cp0_epc) #define profile_pc(regs) instruction_pointer(regs) diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c index 4e6ea1ffad46..7786b608d932 100644 --- a/arch/mips/kernel/ptrace.c +++ b/arch/mips/kernel/ptrace.c @@ -560,10 +560,9 @@ asmlinkage void syscall_trace_enter(struct pt_regs *regs) } out: - if (unlikely(current->audit_context)) - audit_syscall_entry(audit_arch(), regs->regs[2], - regs->regs[4], regs->regs[5], - regs->regs[6], regs->regs[7]); + audit_syscall_entry(audit_arch(), regs->regs[2], + regs->regs[4], regs->regs[5], + regs->regs[6], regs->regs[7]); } /* @@ -572,9 +571,7 @@ out: */ asmlinkage void syscall_trace_leave(struct pt_regs *regs) { - if (unlikely(current->audit_context)) - audit_syscall_exit(AUDITSC_RESULT(regs->regs[7]), - -regs->regs[2]); + audit_syscall_exit(regs); if (!(current->ptrace & PT_PTRACED)) return; diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h index 48223f9b8728..78a205162fd7 100644 --- a/arch/powerpc/include/asm/ptrace.h +++ b/arch/powerpc/include/asm/ptrace.h @@ -86,7 +86,18 @@ struct pt_regs { #define instruction_pointer(regs) ((regs)->nip) #define user_stack_pointer(regs) ((regs)->gpr[1]) #define kernel_stack_pointer(regs) ((regs)->gpr[1]) -#define regs_return_value(regs) ((regs)->gpr[3]) +static inline int is_syscall_success(struct pt_regs *regs) +{ + return !(regs->ccr & 0x10000000); +} + +static inline long regs_return_value(struct pt_regs *regs) +{ + if (is_syscall_success(regs)) + return regs->gpr[3]; + else + return -regs->gpr[3]; +} #ifdef CONFIG_SMP extern unsigned long profile_pc(struct pt_regs *regs); diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 5de73dbd15c7..5b43325402bc 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -1724,22 +1724,20 @@ long do_syscall_trace_enter(struct pt_regs *regs) if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) trace_sys_enter(regs, regs->gpr[0]); - if (unlikely(current->audit_context)) { #ifdef CONFIG_PPC64 - if (!is_32bit_task()) - audit_syscall_entry(AUDIT_ARCH_PPC64, - regs->gpr[0], - regs->gpr[3], regs->gpr[4], - regs->gpr[5], regs->gpr[6]); - else + if (!is_32bit_task()) + audit_syscall_entry(AUDIT_ARCH_PPC64, + regs->gpr[0], + regs->gpr[3], regs->gpr[4], + regs->gpr[5], regs->gpr[6]); + else #endif - audit_syscall_entry(AUDIT_ARCH_PPC, - regs->gpr[0], - regs->gpr[3] & 0xffffffff, - regs->gpr[4] & 0xffffffff, - regs->gpr[5] & 0xffffffff, - regs->gpr[6] & 0xffffffff); - } + audit_syscall_entry(AUDIT_ARCH_PPC, + regs->gpr[0], + regs->gpr[3] & 0xffffffff, + regs->gpr[4] & 0xffffffff, + regs->gpr[5] & 0xffffffff, + regs->gpr[6] & 0xffffffff); return ret ?: regs->gpr[0]; } @@ -1748,9 +1746,7 @@ void do_syscall_trace_leave(struct pt_regs *regs) { int step; - if (unlikely(current->audit_context)) - audit_syscall_exit((regs->ccr&0x10000000)?AUDITSC_FAILURE:AUDITSC_SUCCESS, - regs->result); + audit_syscall_exit(regs); if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) trace_sys_exit(regs, regs->result); diff --git a/arch/s390/include/asm/kexec.h b/arch/s390/include/asm/kexec.h index cf4e47b0948c..3f30dac804ea 100644 --- a/arch/s390/include/asm/kexec.h +++ b/arch/s390/include/asm/kexec.h @@ -42,6 +42,24 @@ /* The native architecture */ #define KEXEC_ARCH KEXEC_ARCH_S390 +/* + * Size for s390x ELF notes per CPU + * + * Seven notes plus zero note at the end: prstatus, fpregset, timer, + * tod_cmp, tod_reg, control regs, and prefix + */ +#define KEXEC_NOTE_BYTES \ + (ALIGN(sizeof(struct elf_note), 4) * 8 + \ + ALIGN(sizeof("CORE"), 4) * 7 + \ + ALIGN(sizeof(struct elf_prstatus), 4) + \ + ALIGN(sizeof(elf_fpregset_t), 4) + \ + ALIGN(sizeof(u64), 4) + \ + ALIGN(sizeof(u64), 4) + \ + ALIGN(sizeof(u32), 4) + \ + ALIGN(sizeof(u64) * 16, 4) + \ + ALIGN(sizeof(u32), 4) \ + ) + /* Provide a dummy definition to avoid build failures. */ static inline void crash_setup_regs(struct pt_regs *newregs, struct pt_regs *oldregs) { } diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h index 56da355678f4..aeb77f017985 100644 --- a/arch/s390/include/asm/ptrace.h +++ b/arch/s390/include/asm/ptrace.h @@ -541,9 +541,13 @@ struct user_regs_struct #define user_mode(regs) (((regs)->psw.mask & PSW_MASK_PSTATE) != 0) #define instruction_pointer(regs) ((regs)->psw.addr & PSW_ADDR_INSN) #define user_stack_pointer(regs)((regs)->gprs[15]) -#define regs_return_value(regs)((regs)->gprs[2]) #define profile_pc(regs) instruction_pointer(regs) +static inline long regs_return_value(struct pt_regs *regs) +{ + return regs->gprs[2]; +} + int regs_query_register_offset(const char *name); const char *regs_query_register_name(unsigned int offset); unsigned long regs_get_register(struct pt_regs *regs, unsigned int offset); diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 573bc29551ef..9d82ed4bcb27 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -740,20 +740,17 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs) if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) trace_sys_enter(regs, regs->gprs[2]); - if (unlikely(current->audit_context)) - audit_syscall_entry(is_compat_task() ? - AUDIT_ARCH_S390 : AUDIT_ARCH_S390X, - regs->gprs[2], regs->orig_gpr2, - regs->gprs[3], regs->gprs[4], - regs->gprs[5]); + audit_syscall_entry(is_compat_task() ? + AUDIT_ARCH_S390 : AUDIT_ARCH_S390X, + regs->gprs[2], regs->orig_gpr2, + regs->gprs[3], regs->gprs[4], + regs->gprs[5]); return ret ?: regs->gprs[2]; } asmlinkage void do_syscall_trace_exit(struct pt_regs *regs) { - if (unlikely(current->audit_context)) - audit_syscall_exit(AUDITSC_RESULT(regs->gprs[2]), - regs->gprs[2]); + audit_syscall_exit(regs); if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) trace_sys_exit(regs, regs->gprs[2]); diff --git a/arch/score/kernel/entry.S b/arch/score/kernel/entry.S index 577abba3fac6..83bb96079c43 100644 --- a/arch/score/kernel/entry.S +++ b/arch/score/kernel/entry.S @@ -408,7 +408,7 @@ ENTRY(handle_sys) sw r9, [r0, PT_EPC] cmpi.c r27, __NR_syscalls # check syscall number - bgtu illegal_syscall + bgeu illegal_syscall slli r8, r27, 2 # get syscall routine la r11, sys_call_table diff --git a/arch/sh/include/asm/ptrace_32.h b/arch/sh/include/asm/ptrace_32.h index 6c2239cca1a2..2d3e906aa722 100644 --- a/arch/sh/include/asm/ptrace_32.h +++ b/arch/sh/include/asm/ptrace_32.h @@ -76,7 +76,10 @@ struct pt_dspregs { #ifdef __KERNEL__ #define MAX_REG_OFFSET offsetof(struct pt_regs, tra) -#define regs_return_value(_regs) ((_regs)->regs[0]) +static inline long regs_return_value(struct pt_regs *regs) +{ + return regs->regs[0]; +} #endif /* __KERNEL__ */ diff --git a/arch/sh/include/asm/ptrace_64.h b/arch/sh/include/asm/ptrace_64.h index bf9be7764d69..eb3fcceaf64b 100644 --- a/arch/sh/include/asm/ptrace_64.h +++ b/arch/sh/include/asm/ptrace_64.h @@ -13,7 +13,10 @@ struct pt_regs { #ifdef __KERNEL__ #define MAX_REG_OFFSET offsetof(struct pt_regs, tregs[7]) -#define regs_return_value(_regs) ((_regs)->regs[3]) +static inline long regs_return_value(struct pt_regs *regs) +{ + return regs->regs[3]; +} #endif /* __KERNEL__ */ diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c index 92b3c276339a..a3e651563763 100644 --- a/arch/sh/kernel/ptrace_32.c +++ b/arch/sh/kernel/ptrace_32.c @@ -518,10 +518,9 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs) if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) trace_sys_enter(regs, regs->regs[0]); - if (unlikely(current->audit_context)) - audit_syscall_entry(audit_arch(), regs->regs[3], - regs->regs[4], regs->regs[5], - regs->regs[6], regs->regs[7]); + audit_syscall_entry(audit_arch(), regs->regs[3], + regs->regs[4], regs->regs[5], + regs->regs[6], regs->regs[7]); return ret ?: regs->regs[0]; } @@ -530,9 +529,7 @@ asmlinkage void do_syscall_trace_leave(struct pt_regs *regs) { int step; - if (unlikely(current->audit_context)) - audit_syscall_exit(AUDITSC_RESULT(regs->regs[0]), - regs->regs[0]); + audit_syscall_exit(regs); if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) trace_sys_exit(regs, regs->regs[0]); diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c index c8f97649f354..3d0080b5c976 100644 --- a/arch/sh/kernel/ptrace_64.c +++ b/arch/sh/kernel/ptrace_64.c @@ -536,10 +536,9 @@ asmlinkage long long do_syscall_trace_enter(struct pt_regs *regs) if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) trace_sys_enter(regs, regs->regs[9]); - if (unlikely(current->audit_context)) - audit_syscall_entry(audit_arch(), regs->regs[1], - regs->regs[2], regs->regs[3], - regs->regs[4], regs->regs[5]); + audit_syscall_entry(audit_arch(), regs->regs[1], + regs->regs[2], regs->regs[3], + regs->regs[4], regs->regs[5]); return ret ?: regs->regs[9]; } @@ -548,9 +547,7 @@ asmlinkage void do_syscall_trace_leave(struct pt_regs *regs) { int step; - if (unlikely(current->audit_context)) - audit_syscall_exit(AUDITSC_RESULT(regs->regs[9]), - regs->regs[9]); + audit_syscall_exit(regs); if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) trace_sys_exit(regs, regs->regs[9]); diff --git a/arch/sparc/include/asm/ptrace.h b/arch/sparc/include/asm/ptrace.h index a0e1bcf843a1..c00c3b5c2806 100644 --- a/arch/sparc/include/asm/ptrace.h +++ b/arch/sparc/include/asm/ptrace.h @@ -207,7 +207,15 @@ do { current_thread_info()->syscall_noerror = 1; \ #define instruction_pointer(regs) ((regs)->tpc) #define instruction_pointer_set(regs, val) ((regs)->tpc = (val)) #define user_stack_pointer(regs) ((regs)->u_regs[UREG_FP]) -#define regs_return_value(regs) ((regs)->u_regs[UREG_I0]) +static inline int is_syscall_success(struct pt_regs *regs) +{ + return !(regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY)); +} + +static inline long regs_return_value(struct pt_regs *regs) +{ + return regs->u_regs[UREG_I0]; +} #ifdef CONFIG_SMP extern unsigned long profile_pc(struct pt_regs *); #else diff --git a/arch/sparc/kernel/ptrace_64.c b/arch/sparc/kernel/ptrace_64.c index 96ee50a80661..9388844cd88c 100644 --- a/arch/sparc/kernel/ptrace_64.c +++ b/arch/sparc/kernel/ptrace_64.c @@ -1071,32 +1071,22 @@ asmlinkage int syscall_trace_enter(struct pt_regs *regs) if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) trace_sys_enter(regs, regs->u_regs[UREG_G1]); - if (unlikely(current->audit_context) && !ret) - audit_syscall_entry((test_thread_flag(TIF_32BIT) ? - AUDIT_ARCH_SPARC : - AUDIT_ARCH_SPARC64), - regs->u_regs[UREG_G1], - regs->u_regs[UREG_I0], - regs->u_regs[UREG_I1], - regs->u_regs[UREG_I2], - regs->u_regs[UREG_I3]); + audit_syscall_entry((test_thread_flag(TIF_32BIT) ? + AUDIT_ARCH_SPARC : + AUDIT_ARCH_SPARC64), + regs->u_regs[UREG_G1], + regs->u_regs[UREG_I0], + regs->u_regs[UREG_I1], + regs->u_regs[UREG_I2], + regs->u_regs[UREG_I3]); return ret; } asmlinkage void syscall_trace_leave(struct pt_regs *regs) { -#ifdef CONFIG_AUDITSYSCALL - if (unlikely(current->audit_context)) { - unsigned long tstate = regs->tstate; - int result = AUDITSC_SUCCESS; + audit_syscall_exit(regs); - if (unlikely(tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) - result = AUDITSC_FAILURE; - - audit_syscall_exit(result, regs->u_regs[UREG_I0]); - } -#endif if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) trace_sys_exit(regs, regs->u_regs[UREG_G1]); diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c index c9da32b0c707..06b190390505 100644 --- a/arch/um/kernel/ptrace.c +++ b/arch/um/kernel/ptrace.c @@ -167,17 +167,15 @@ void syscall_trace(struct uml_pt_regs *regs, int entryexit) int is_singlestep = (current->ptrace & PT_DTRACE) && entryexit; int tracesysgood; - if (unlikely(current->audit_context)) { - if (!entryexit) - audit_syscall_entry(HOST_AUDIT_ARCH, - UPT_SYSCALL_NR(regs), - UPT_SYSCALL_ARG1(regs), - UPT_SYSCALL_ARG2(regs), - UPT_SYSCALL_ARG3(regs), - UPT_SYSCALL_ARG4(regs)); - else audit_syscall_exit(AUDITSC_RESULT(UPT_SYSCALL_RET(regs)), - UPT_SYSCALL_RET(regs)); - } + if (!entryexit) + audit_syscall_entry(HOST_AUDIT_ARCH, + UPT_SYSCALL_NR(regs), + UPT_SYSCALL_ARG1(regs), + UPT_SYSCALL_ARG2(regs), + UPT_SYSCALL_ARG3(regs), + UPT_SYSCALL_ARG4(regs)); + else + audit_syscall_exit(regs); /* Fake a debug trap */ if (is_singlestep) diff --git a/arch/x86/.gitignore b/arch/x86/.gitignore index 028079065af6..7cab8c08e6d1 100644 --- a/arch/x86/.gitignore +++ b/arch/x86/.gitignore @@ -1,3 +1,4 @@ boot/compressed/vmlinux tools/test_get_len +tools/insn_sanity diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 6c14ecd851d0..864cc6e6ac8e 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -125,16 +125,6 @@ config HAVE_LATENCYTOP_SUPPORT config MMU def_bool y -config ZONE_DMA - bool "DMA memory allocation support" if EXPERT - default y - help - DMA memory allocation support allows devices with less than 32-bit - addressing to allocate within the first 16MB of address space. - Disable if no such devices will be used. - - If unsure, say Y. - config SBUS bool @@ -255,6 +245,16 @@ source "kernel/Kconfig.freezer" menu "Processor type and features" +config ZONE_DMA + bool "DMA memory allocation support" if EXPERT + default y + help + DMA memory allocation support allows devices with less than 32-bit + addressing to allocate within the first 16MB of address space. + Disable if no such devices will be used. + + If unsure, say Y. + source "kernel/time/Kconfig" config SMP diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S index 1106261856c8..e3e734005e19 100644 --- a/arch/x86/ia32/ia32entry.S +++ b/arch/x86/ia32/ia32entry.S @@ -14,6 +14,7 @@ #include <asm/segment.h> #include <asm/irqflags.h> #include <linux/linkage.h> +#include <linux/err.h> /* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */ #include <linux/elf-em.h> @@ -189,7 +190,7 @@ sysexit_from_sys_call: movl %ebx,%edx /* 3rd arg: 1st syscall arg */ movl %eax,%esi /* 2nd arg: syscall number */ movl $AUDIT_ARCH_I386,%edi /* 1st arg: audit arch */ - call audit_syscall_entry + call __audit_syscall_entry movl RAX-ARGOFFSET(%rsp),%eax /* reload syscall number */ cmpq $(IA32_NR_syscalls-1),%rax ja ia32_badsys @@ -206,12 +207,13 @@ sysexit_from_sys_call: TRACE_IRQS_ON sti movl %eax,%esi /* second arg, syscall return value */ - cmpl $0,%eax /* is it < 0? */ - setl %al /* 1 if so, 0 if not */ + cmpl $-MAX_ERRNO,%eax /* is it an error ? */ + jbe 1f + movslq %eax, %rsi /* if error sign extend to 64 bits */ +1: setbe %al /* 1 if error, 0 if not */ movzbl %al,%edi /* zero-extend that into %edi */ - inc %edi /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */ - call audit_syscall_exit - movl RAX-ARGOFFSET(%rsp),%eax /* reload syscall return value */ + call __audit_syscall_exit + movq RAX-ARGOFFSET(%rsp),%rax /* reload syscall return value */ movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi cli TRACE_IRQS_OFF diff --git a/arch/x86/include/asm/unistd.h b/arch/x86/include/asm/unistd.h index b4a3db7ce140..21f77b89e47a 100644 --- a/arch/x86/include/asm/unistd.h +++ b/arch/x86/include/asm/unistd.h @@ -7,6 +7,7 @@ # include <asm/unistd_32.h> # define __ARCH_WANT_IPC_PARSE_VERSION # define __ARCH_WANT_STAT64 +# define __ARCH_WANT_SYS_IPC # define __ARCH_WANT_SYS_OLD_MMAP # define __ARCH_WANT_SYS_OLD_SELECT diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h index 8e862aaf0d90..becf47b81735 100644 --- a/arch/x86/include/asm/uv/uv_bau.h +++ b/arch/x86/include/asm/uv/uv_bau.h @@ -65,7 +65,7 @@ * UV2: Bit 19 selects between * (0): 10 microsecond timebase and * (1): 80 microseconds - * we're using 655us, similar to UV1: 65 units of 10us + * we're using 560us, similar to UV1: 65 units of 10us */ #define UV1_INTD_SOFT_ACK_TIMEOUT_PERIOD (9UL) #define UV2_INTD_SOFT_ACK_TIMEOUT_PERIOD (15UL) @@ -167,6 +167,7 @@ #define FLUSH_RETRY_TIMEOUT 2 #define FLUSH_GIVEUP 3 #define FLUSH_COMPLETE 4 +#define FLUSH_RETRY_BUSYBUG 5 /* * tuning the action when the numalink network is extremely delayed @@ -235,10 +236,10 @@ struct bau_msg_payload { /* - * Message header: 16 bytes (128 bits) (bytes 0x30-0x3f of descriptor) + * UV1 Message header: 16 bytes (128 bits) (bytes 0x30-0x3f of descriptor) * see table 4.2.3.0.1 in broacast_assist spec. */ -struct bau_msg_header { +struct uv1_bau_msg_header { unsigned int dest_subnodeid:6; /* must be 0x10, for the LB */ /* bits 5:0 */ unsigned int base_dest_nasid:15; /* nasid of the first bit */ @@ -318,19 +319,87 @@ struct bau_msg_header { }; /* + * UV2 Message header: 16 bytes (128 bits) (bytes 0x30-0x3f of descriptor) + * see figure 9-2 of harp_sys.pdf + */ +struct uv2_bau_msg_header { + unsigned int base_dest_nasid:15; /* nasid of the first bit */ + /* bits 14:0 */ /* in uvhub map */ + unsigned int dest_subnodeid:5; /* must be 0x10, for the LB */ + /* bits 19:15 */ + unsigned int rsvd_1:1; /* must be zero */ + /* bit 20 */ + /* Address bits 59:21 */ + /* bits 25:2 of address (44:21) are payload */ + /* these next 24 bits become bytes 12-14 of msg */ + /* bits 28:21 land in byte 12 */ + unsigned int replied_to:1; /* sent as 0 by the source to + byte 12 */ + /* bit 21 */ + unsigned int msg_type:3; /* software type of the + message */ + /* bits 24:22 */ + unsigned int canceled:1; /* message canceled, resource + is to be freed*/ + /* bit 25 */ + unsigned int payload_1:3; /* not currently used */ + /* bits 28:26 */ + + /* bits 36:29 land in byte 13 */ + unsigned int payload_2a:3; /* not currently used */ + unsigned int payload_2b:5; /* not currently used */ + /* bits 36:29 */ + + /* bits 44:37 land in byte 14 */ + unsigned int payload_3:8; /* not currently used */ + /* bits 44:37 */ + + unsigned int rsvd_2:7; /* reserved */ + /* bits 51:45 */ + unsigned int swack_flag:1; /* software acknowledge flag */ + /* bit 52 */ + unsigned int rsvd_3a:3; /* must be zero */ + unsigned int rsvd_3b:8; /* must be zero */ + unsigned int rsvd_3c:8; /* must be zero */ + unsigned int rsvd_3d:3; /* must be zero */ + /* bits 74:53 */ + unsigned int fairness:3; /* usually zero */ + /* bits 77:75 */ + + unsigned int sequence:16; /* message sequence number */ + /* bits 93:78 Suppl_A */ + unsigned int chaining:1; /* next descriptor is part of + this activation*/ + /* bit 94 */ + unsigned int multilevel:1; /* multi-level multicast + format */ + /* bit 95 */ + unsigned int rsvd_4:24; /* ordered / source node / + source subnode / aging + must be zero */ + /* bits 119:96 */ + unsigned int command:8; /* message type */ + /* bits 127:120 */ +}; + +/* * The activation descriptor: * The format of the message to send, plus all accompanying control * Should be 64 bytes */ struct bau_desc { - struct pnmask distribution; + struct pnmask distribution; /* * message template, consisting of header and payload: */ - struct bau_msg_header header; - struct bau_msg_payload payload; + union bau_msg_header { + struct uv1_bau_msg_header uv1_hdr; + struct uv2_bau_msg_header uv2_hdr; + } header; + + struct bau_msg_payload payload; }; -/* +/* UV1: * -payload-- ---------header------ * bytes 0-11 bits 41-56 bits 58-81 * A B (2) C (3) @@ -340,6 +409,16 @@ struct bau_desc { * bytes 0-11 bytes 12-14 bytes 16-17 (byte 15 filled in by hw as vector) * ------------payload queue----------- */ +/* UV2: + * -payload-- ---------header------ + * bytes 0-11 bits 70-78 bits 21-44 + * A B (2) C (3) + * + * A/B/C are moved to: + * A C B + * bytes 0-11 bytes 12-14 bytes 16-17 (byte 15 filled in by hw as vector) + * ------------payload queue----------- + */ /* * The payload queue on the destination side is an array of these. @@ -385,7 +464,6 @@ struct bau_pq_entry { struct msg_desc { struct bau_pq_entry *msg; int msg_slot; - int swack_slot; struct bau_pq_entry *queue_first; struct bau_pq_entry *queue_last; }; @@ -405,6 +483,7 @@ struct ptc_stats { requests */ unsigned long s_stimeout; /* source side timeouts */ unsigned long s_dtimeout; /* destination side timeouts */ + unsigned long s_strongnacks; /* number of strong nack's */ unsigned long s_time; /* time spent in sending side */ unsigned long s_retriesok; /* successful retries */ unsigned long s_ntargcpu; /* total number of cpu's @@ -439,6 +518,9 @@ struct ptc_stats { unsigned long s_retry_messages; /* retry broadcasts */ unsigned long s_bau_reenabled; /* for bau enable/disable */ unsigned long s_bau_disabled; /* for bau enable/disable */ + unsigned long s_uv2_wars; /* uv2 workaround, perm. busy */ + unsigned long s_uv2_wars_hw; /* uv2 workaround, hiwater */ + unsigned long s_uv2_war_waits; /* uv2 workaround, long waits */ /* destination statistics */ unsigned long d_alltlb; /* times all tlb's on this cpu were flushed */ @@ -511,9 +593,12 @@ struct bau_control { short osnode; short uvhub_cpu; short uvhub; + short uvhub_version; short cpus_in_socket; short cpus_in_uvhub; short partition_base_pnode; + short using_desc; /* an index, like uvhub_cpu */ + unsigned int inuse_map; unsigned short message_number; unsigned short uvhub_quiesce; short socket_acknowledge_count[DEST_Q_SIZE]; @@ -531,6 +616,7 @@ struct bau_control { int cong_response_us; int cong_reps; int cong_period; + unsigned long clocks_per_100_usec; cycles_t period_time; long period_requests; struct hub_and_pnode *thp; @@ -591,6 +677,11 @@ static inline void write_mmr_sw_ack(unsigned long mr) uv_write_local_mmr(UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS, mr); } +static inline void write_gmmr_sw_ack(int pnode, unsigned long mr) +{ + write_gmmr(pnode, UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS, mr); +} + static inline unsigned long read_mmr_sw_ack(void) { return read_lmmr(UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE); diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 174d938d576b..62d61e9976eb 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -703,7 +703,7 @@ void __init e820_mark_nosave_regions(unsigned long limit_pfn) } #endif -#ifdef CONFIG_HIBERNATION +#ifdef CONFIG_ACPI /** * Mark ACPI NVS memory region, so that we can save/restore it during * hibernation and the subsequent resume. @@ -716,7 +716,7 @@ static int __init e820_mark_nvs_memory(void) struct e820entry *ei = &e820.map[i]; if (ei->type == E820_NVS) - suspend_nvs_register(ei->addr, ei->size); + acpi_nvs_register(ei->addr, ei->size); } return 0; diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index 4af9fd2450a5..79d97e68f042 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -42,6 +42,7 @@ */ #include <linux/linkage.h> +#include <linux/err.h> #include <asm/thread_info.h> #include <asm/irqflags.h> #include <asm/errno.h> @@ -453,7 +454,7 @@ sysenter_audit: movl %ebx,%ecx /* 3rd arg: 1st syscall arg */ movl %eax,%edx /* 2nd arg: syscall number */ movl $AUDIT_ARCH_I386,%eax /* 1st arg: audit arch */ - call audit_syscall_entry + call __audit_syscall_entry pushl_cfi %ebx movl PT_EAX(%esp),%eax /* reload syscall number */ jmp sysenter_do_call @@ -464,11 +465,10 @@ sysexit_audit: TRACE_IRQS_ON ENABLE_INTERRUPTS(CLBR_ANY) movl %eax,%edx /* second arg, syscall return value */ - cmpl $0,%eax /* is it < 0? */ - setl %al /* 1 if so, 0 if not */ + cmpl $-MAX_ERRNO,%eax /* is it an error ? */ + setbe %al /* 1 if so, 0 if not */ movzbl %al,%eax /* zero-extend that */ - inc %eax /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */ - call audit_syscall_exit + call __audit_syscall_exit DISABLE_INTERRUPTS(CLBR_ANY) TRACE_IRQS_OFF movl TI_flags(%ebp), %ecx diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 940ba711fc28..3fe8239fd8fb 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -55,6 +55,7 @@ #include <asm/paravirt.h> #include <asm/ftrace.h> #include <asm/percpu.h> +#include <linux/err.h> /* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */ #include <linux/elf-em.h> @@ -548,7 +549,7 @@ badsys: #ifdef CONFIG_AUDITSYSCALL /* * Fast path for syscall audit without full syscall trace. - * We just call audit_syscall_entry() directly, and then + * We just call __audit_syscall_entry() directly, and then * jump back to the normal fast path. */ auditsys: @@ -558,22 +559,21 @@ auditsys: movq %rdi,%rdx /* 3rd arg: 1st syscall arg */ movq %rax,%rsi /* 2nd arg: syscall number */ movl $AUDIT_ARCH_X86_64,%edi /* 1st arg: audit arch */ - call audit_syscall_entry + call __audit_syscall_entry LOAD_ARGS 0 /* reload call-clobbered registers */ jmp system_call_fastpath /* - * Return fast path for syscall audit. Call audit_syscall_exit() + * Return fast path for syscall audit. Call __audit_syscall_exit() * directly and then jump back to the fast path with TIF_SYSCALL_AUDIT * masked off. */ sysret_audit: movq RAX-ARGOFFSET(%rsp),%rsi /* second arg, syscall return value */ - cmpq $0,%rsi /* is it < 0? */ - setl %al /* 1 if so, 0 if not */ + cmpq $-MAX_ERRNO,%rsi /* is it < -MAX_ERRNO? */ + setbe %al /* 1 if so, 0 if not */ movzbl %al,%edi /* zero-extend that into %edi */ - inc %edi /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */ - call audit_syscall_exit + call __audit_syscall_exit movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi jmp sysret_check #endif /* CONFIG_AUDITSYSCALL */ diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index 89a04c7b5bb6..50267386b766 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -1392,20 +1392,18 @@ long syscall_trace_enter(struct pt_regs *regs) if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) trace_sys_enter(regs, regs->orig_ax); - if (unlikely(current->audit_context)) { - if (IS_IA32) - audit_syscall_entry(AUDIT_ARCH_I386, - regs->orig_ax, - regs->bx, regs->cx, - regs->dx, regs->si); + if (IS_IA32) + audit_syscall_entry(AUDIT_ARCH_I386, + regs->orig_ax, + regs->bx, regs->cx, + regs->dx, regs->si); #ifdef CONFIG_X86_64 - else - audit_syscall_entry(AUDIT_ARCH_X86_64, - regs->orig_ax, - regs->di, regs->si, - regs->dx, regs->r10); + else + audit_syscall_entry(AUDIT_ARCH_X86_64, + regs->orig_ax, + regs->di, regs->si, + regs->dx, regs->r10); #endif - } return ret ?: regs->orig_ax; } @@ -1414,8 +1412,7 @@ void syscall_trace_leave(struct pt_regs *regs) { bool step; - if (unlikely(current->audit_context)) - audit_syscall_exit(AUDITSC_RESULT(regs->ax), regs->ax); + audit_syscall_exit(regs); if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) trace_sys_exit(regs, regs->ax); diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index c0dd5b603749..a62c201c97ec 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -290,14 +290,15 @@ static inline int pit_verify_msb(unsigned char val) static inline int pit_expect_msb(unsigned char val, u64 *tscp, unsigned long *deltap) { int count; - u64 tsc = 0; + u64 tsc = 0, prev_tsc = 0; for (count = 0; count < 50000; count++) { if (!pit_verify_msb(val)) break; + prev_tsc = tsc; tsc = get_cycles(); } - *deltap = get_cycles() - tsc; + *deltap = get_cycles() - prev_tsc; *tscp = tsc; /* @@ -311,9 +312,9 @@ static inline int pit_expect_msb(unsigned char val, u64 *tscp, unsigned long *de * How many MSB values do we want to see? We aim for * a maximum error rate of 500ppm (in practice the * real error is much smaller), but refuse to spend - * more than 25ms on it. + * more than 50ms on it. */ -#define MAX_QUICK_PIT_MS 25 +#define MAX_QUICK_PIT_MS 50 #define MAX_QUICK_PIT_ITERATIONS (MAX_QUICK_PIT_MS * PIT_TICK_RATE / 1000 / 256) static unsigned long quick_pit_calibrate(void) @@ -383,15 +384,12 @@ success: * * As a result, we can depend on there not being * any odd delays anywhere, and the TSC reads are - * reliable (within the error). We also adjust the - * delta to the middle of the error bars, just - * because it looks nicer. + * reliable (within the error). * * kHz = ticks / time-in-seconds / 1000; * kHz = (t2 - t1) / (I * 256 / PIT_TICK_RATE) / 1000 * kHz = ((t2 - t1) * PIT_TICK_RATE) / (I * 256 * 1000) */ - delta += (long)(d2 - d1)/2; delta *= PIT_TICK_RATE; do_div(delta, i*256*1000); printk("Fast TSC calibration using PIT\n"); diff --git a/arch/x86/kernel/vm86_32.c b/arch/x86/kernel/vm86_32.c index 863f8753ab0a..b466cab5ba15 100644 --- a/arch/x86/kernel/vm86_32.c +++ b/arch/x86/kernel/vm86_32.c @@ -335,9 +335,11 @@ static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk if (info->flags & VM86_SCREEN_BITMAP) mark_screen_rdonly(tsk->mm); - /*call audit_syscall_exit since we do not exit via the normal paths */ + /*call __audit_syscall_exit since we do not exit via the normal paths */ +#ifdef CONFIG_AUDITSYSCALL if (unlikely(current->audit_context)) - audit_syscall_exit(AUDITSC_RESULT(0), 0); + __audit_syscall_exit(1, 0); +#endif __asm__ __volatile__( "movl %0,%%esp\n\t" diff --git a/arch/x86/lib/x86-opcode-map.txt b/arch/x86/lib/x86-opcode-map.txt index 5b83c51c12e0..819137904428 100644 --- a/arch/x86/lib/x86-opcode-map.txt +++ b/arch/x86/lib/x86-opcode-map.txt @@ -219,7 +219,9 @@ ab: STOS/W/D/Q Yv,rAX ac: LODS/B AL,Xb ad: LODS/W/D/Q rAX,Xv ae: SCAS/B AL,Yb -af: SCAS/W/D/Q rAX,Xv +# Note: The May 2011 Intel manual shows Xv for the second parameter of the +# next instruction but Yv is correct +af: SCAS/W/D/Q rAX,Yv # 0xb0 - 0xbf b0: MOV AL/R8L,Ib b1: MOV CL/R9L,Ib @@ -729,8 +731,8 @@ de: VAESDEC Vdq,Hdq,Wdq (66),(v1) df: VAESDECLAST Vdq,Hdq,Wdq (66),(v1) f0: MOVBE Gy,My | MOVBE Gw,Mw (66) | CRC32 Gd,Eb (F2) f1: MOVBE My,Gy | MOVBE Mw,Gw (66) | CRC32 Gd,Ey (F2) -f3: ANDN Gy,By,Ey (v) -f4: Grp17 (1A) +f2: ANDN Gy,By,Ey (v) +f3: Grp17 (1A) f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) f6: MULX By,Gy,rDX,Ey (F2),(v) f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v) diff --git a/arch/x86/mm/srat.c b/arch/x86/mm/srat.c index fd61b3fb7341..1c1c4f46a7c1 100644 --- a/arch/x86/mm/srat.c +++ b/arch/x86/mm/srat.c @@ -109,6 +109,8 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) if ((pa->flags & ACPI_SRAT_CPU_ENABLED) == 0) return; pxm = pa->proximity_domain_lo; + if (acpi_srat_revision >= 2) + pxm |= *((unsigned int*)pa->proximity_domain_hi) << 8; node = setup_node(pxm); if (node < 0) { printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm); @@ -160,6 +162,8 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) start = ma->base_address; end = start + ma->length; pxm = ma->proximity_domain; + if (acpi_srat_revision <= 1) + pxm &= 0xff; node = setup_node(pxm); if (node < 0) { printk(KERN_ERR "SRAT: Too many proximity domains.\n"); diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c index 5b552198f774..9be4cff00a2d 100644 --- a/arch/x86/platform/uv/tlb_uv.c +++ b/arch/x86/platform/uv/tlb_uv.c @@ -157,13 +157,14 @@ static int __init uvhub_to_first_apicid(int uvhub) * clear of the Timeout bit (as well) will free the resource. No reply will * be sent (the hardware will only do one reply per message). */ -static void reply_to_message(struct msg_desc *mdp, struct bau_control *bcp) +static void reply_to_message(struct msg_desc *mdp, struct bau_control *bcp, + int do_acknowledge) { unsigned long dw; struct bau_pq_entry *msg; msg = mdp->msg; - if (!msg->canceled) { + if (!msg->canceled && do_acknowledge) { dw = (msg->swack_vec << UV_SW_ACK_NPENDING) | msg->swack_vec; write_mmr_sw_ack(dw); } @@ -212,8 +213,8 @@ static void bau_process_retry_msg(struct msg_desc *mdp, if (mmr & (msg_res << UV_SW_ACK_NPENDING)) { unsigned long mr; /* - * is the resource timed out? - * make everyone ignore the cancelled message. + * Is the resource timed out? + * Make everyone ignore the cancelled message. */ msg2->canceled = 1; stat->d_canceled++; @@ -231,8 +232,8 @@ static void bau_process_retry_msg(struct msg_desc *mdp, * Do all the things a cpu should do for a TLB shootdown message. * Other cpu's may come here at the same time for this message. */ -static void bau_process_message(struct msg_desc *mdp, - struct bau_control *bcp) +static void bau_process_message(struct msg_desc *mdp, struct bau_control *bcp, + int do_acknowledge) { short socket_ack_count = 0; short *sp; @@ -284,8 +285,9 @@ static void bau_process_message(struct msg_desc *mdp, if (msg_ack_count == bcp->cpus_in_uvhub) { /* * All cpus in uvhub saw it; reply + * (unless we are in the UV2 workaround) */ - reply_to_message(mdp, bcp); + reply_to_message(mdp, bcp, do_acknowledge); } } @@ -491,27 +493,138 @@ static int uv1_wait_completion(struct bau_desc *bau_desc, /* * UV2 has an extra bit of status in the ACTIVATION_STATUS_2 register. */ -static unsigned long uv2_read_status(unsigned long offset, int rshft, int cpu) +static unsigned long uv2_read_status(unsigned long offset, int rshft, int desc) { unsigned long descriptor_status; unsigned long descriptor_status2; descriptor_status = ((read_lmmr(offset) >> rshft) & UV_ACT_STATUS_MASK); - descriptor_status2 = (read_mmr_uv2_status() >> cpu) & 0x1UL; + descriptor_status2 = (read_mmr_uv2_status() >> desc) & 0x1UL; descriptor_status = (descriptor_status << 1) | descriptor_status2; return descriptor_status; } +/* + * Return whether the status of the descriptor that is normally used for this + * cpu (the one indexed by its hub-relative cpu number) is busy. + * The status of the original 32 descriptors is always reflected in the 64 + * bits of UVH_LB_BAU_SB_ACTIVATION_STATUS_0. + * The bit provided by the activation_status_2 register is irrelevant to + * the status if it is only being tested for busy or not busy. + */ +int normal_busy(struct bau_control *bcp) +{ + int cpu = bcp->uvhub_cpu; + int mmr_offset; + int right_shift; + + mmr_offset = UVH_LB_BAU_SB_ACTIVATION_STATUS_0; + right_shift = cpu * UV_ACT_STATUS_SIZE; + return (((((read_lmmr(mmr_offset) >> right_shift) & + UV_ACT_STATUS_MASK)) << 1) == UV2H_DESC_BUSY); +} + +/* + * Entered when a bau descriptor has gone into a permanent busy wait because + * of a hardware bug. + * Workaround the bug. + */ +int handle_uv2_busy(struct bau_control *bcp) +{ + int busy_one = bcp->using_desc; + int normal = bcp->uvhub_cpu; + int selected = -1; + int i; + unsigned long descriptor_status; + unsigned long status; + int mmr_offset; + struct bau_desc *bau_desc_old; + struct bau_desc *bau_desc_new; + struct bau_control *hmaster = bcp->uvhub_master; + struct ptc_stats *stat = bcp->statp; + cycles_t ttm; + + stat->s_uv2_wars++; + spin_lock(&hmaster->uvhub_lock); + /* try for the original first */ + if (busy_one != normal) { + if (!normal_busy(bcp)) + selected = normal; + } + if (selected < 0) { + /* can't use the normal, select an alternate */ + mmr_offset = UVH_LB_BAU_SB_ACTIVATION_STATUS_1; + descriptor_status = read_lmmr(mmr_offset); + + /* scan available descriptors 32-63 */ + for (i = 0; i < UV_CPUS_PER_AS; i++) { + if ((hmaster->inuse_map & (1 << i)) == 0) { + status = ((descriptor_status >> + (i * UV_ACT_STATUS_SIZE)) & + UV_ACT_STATUS_MASK) << 1; + if (status != UV2H_DESC_BUSY) { + selected = i + UV_CPUS_PER_AS; + break; + } + } + } + } + + if (busy_one != normal) + /* mark the busy alternate as not in-use */ + hmaster->inuse_map &= ~(1 << (busy_one - UV_CPUS_PER_AS)); + + if (selected >= 0) { + /* switch to the selected descriptor */ + if (selected != normal) { + /* set the selected alternate as in-use */ + hmaster->inuse_map |= + (1 << (selected - UV_CPUS_PER_AS)); + if (selected > stat->s_uv2_wars_hw) + stat->s_uv2_wars_hw = selected; + } + bau_desc_old = bcp->descriptor_base; + bau_desc_old += (ITEMS_PER_DESC * busy_one); + bcp->using_desc = selected; + bau_desc_new = bcp->descriptor_base; + bau_desc_new += (ITEMS_PER_DESC * selected); + *bau_desc_new = *bau_desc_old; + } else { + /* + * All are busy. Wait for the normal one for this cpu to + * free up. + */ + stat->s_uv2_war_waits++; + spin_unlock(&hmaster->uvhub_lock); + ttm = get_cycles(); + do { + cpu_relax(); + } while (normal_busy(bcp)); + spin_lock(&hmaster->uvhub_lock); + /* switch to the original descriptor */ + bcp->using_desc = normal; + bau_desc_old = bcp->descriptor_base; + bau_desc_old += (ITEMS_PER_DESC * bcp->using_desc); + bcp->using_desc = (ITEMS_PER_DESC * normal); + bau_desc_new = bcp->descriptor_base; + bau_desc_new += (ITEMS_PER_DESC * normal); + *bau_desc_new = *bau_desc_old; /* copy the entire descriptor */ + } + spin_unlock(&hmaster->uvhub_lock); + return FLUSH_RETRY_BUSYBUG; +} + static int uv2_wait_completion(struct bau_desc *bau_desc, unsigned long mmr_offset, int right_shift, struct bau_control *bcp, long try) { unsigned long descriptor_stat; cycles_t ttm; - int cpu = bcp->uvhub_cpu; + int desc = bcp->using_desc; + long busy_reps = 0; struct ptc_stats *stat = bcp->statp; - descriptor_stat = uv2_read_status(mmr_offset, right_shift, cpu); + descriptor_stat = uv2_read_status(mmr_offset, right_shift, desc); /* spin on the status MMR, waiting for it to go idle */ while (descriptor_stat != UV2H_DESC_IDLE) { @@ -522,32 +635,35 @@ static int uv2_wait_completion(struct bau_desc *bau_desc, * our message and its state will stay IDLE. */ if ((descriptor_stat == UV2H_DESC_SOURCE_TIMEOUT) || - (descriptor_stat == UV2H_DESC_DEST_STRONG_NACK) || (descriptor_stat == UV2H_DESC_DEST_PUT_ERR)) { stat->s_stimeout++; return FLUSH_GIVEUP; + } else if (descriptor_stat == UV2H_DESC_DEST_STRONG_NACK) { + stat->s_strongnacks++; + bcp->conseccompletes = 0; + return FLUSH_GIVEUP; } else if (descriptor_stat == UV2H_DESC_DEST_TIMEOUT) { stat->s_dtimeout++; - ttm = get_cycles(); - /* - * Our retries may be blocked by all destination - * swack resources being consumed, and a timeout - * pending. In that case hardware returns the - * ERROR that looks like a destination timeout. - */ - if (cycles_2_us(ttm - bcp->send_message) < timeout_us) { - bcp->conseccompletes = 0; - return FLUSH_RETRY_PLUGGED; - } bcp->conseccompletes = 0; return FLUSH_RETRY_TIMEOUT; } else { + busy_reps++; + if (busy_reps > 1000000) { + /* not to hammer on the clock */ + busy_reps = 0; + ttm = get_cycles(); + if ((ttm - bcp->send_message) > + (bcp->clocks_per_100_usec)) { + return handle_uv2_busy(bcp); + } + } /* * descriptor_stat is still BUSY */ cpu_relax(); } - descriptor_stat = uv2_read_status(mmr_offset, right_shift, cpu); + descriptor_stat = uv2_read_status(mmr_offset, right_shift, + desc); } bcp->conseccompletes++; return FLUSH_COMPLETE; @@ -563,17 +679,17 @@ static int wait_completion(struct bau_desc *bau_desc, { int right_shift; unsigned long mmr_offset; - int cpu = bcp->uvhub_cpu; + int desc = bcp->using_desc; - if (cpu < UV_CPUS_PER_AS) { + if (desc < UV_CPUS_PER_AS) { mmr_offset = UVH_LB_BAU_SB_ACTIVATION_STATUS_0; - right_shift = cpu * UV_ACT_STATUS_SIZE; + right_shift = desc * UV_ACT_STATUS_SIZE; } else { mmr_offset = UVH_LB_BAU_SB_ACTIVATION_STATUS_1; - right_shift = ((cpu - UV_CPUS_PER_AS) * UV_ACT_STATUS_SIZE); + right_shift = ((desc - UV_CPUS_PER_AS) * UV_ACT_STATUS_SIZE); } - if (is_uv1_hub()) + if (bcp->uvhub_version == 1) return uv1_wait_completion(bau_desc, mmr_offset, right_shift, bcp, try); else @@ -752,19 +868,22 @@ static void handle_cmplt(int completion_status, struct bau_desc *bau_desc, * Returns 1 if it gives up entirely and the original cpu mask is to be * returned to the kernel. */ -int uv_flush_send_and_wait(struct bau_desc *bau_desc, - struct cpumask *flush_mask, struct bau_control *bcp) +int uv_flush_send_and_wait(struct cpumask *flush_mask, struct bau_control *bcp) { int seq_number = 0; int completion_stat = 0; + int uv1 = 0; long try = 0; unsigned long index; cycles_t time1; cycles_t time2; struct ptc_stats *stat = bcp->statp; struct bau_control *hmaster = bcp->uvhub_master; + struct uv1_bau_msg_header *uv1_hdr = NULL; + struct uv2_bau_msg_header *uv2_hdr = NULL; + struct bau_desc *bau_desc; - if (is_uv1_hub()) + if (bcp->uvhub_version == 1) uv1_throttle(hmaster, stat); while (hmaster->uvhub_quiesce) @@ -772,22 +891,39 @@ int uv_flush_send_and_wait(struct bau_desc *bau_desc, time1 = get_cycles(); do { - if (try == 0) { - bau_desc->header.msg_type = MSG_REGULAR; + bau_desc = bcp->descriptor_base; + bau_desc += (ITEMS_PER_DESC * bcp->using_desc); + if (bcp->uvhub_version == 1) { + uv1 = 1; + uv1_hdr = &bau_desc->header.uv1_hdr; + } else + uv2_hdr = &bau_desc->header.uv2_hdr; + if ((try == 0) || (completion_stat == FLUSH_RETRY_BUSYBUG)) { + if (uv1) + uv1_hdr->msg_type = MSG_REGULAR; + else + uv2_hdr->msg_type = MSG_REGULAR; seq_number = bcp->message_number++; } else { - bau_desc->header.msg_type = MSG_RETRY; + if (uv1) + uv1_hdr->msg_type = MSG_RETRY; + else + uv2_hdr->msg_type = MSG_RETRY; stat->s_retry_messages++; } - bau_desc->header.sequence = seq_number; - index = (1UL << AS_PUSH_SHIFT) | bcp->uvhub_cpu; + if (uv1) + uv1_hdr->sequence = seq_number; + else + uv2_hdr->sequence = seq_number; + index = (1UL << AS_PUSH_SHIFT) | bcp->using_desc; bcp->send_message = get_cycles(); write_mmr_activation(index); try++; completion_stat = wait_completion(bau_desc, bcp, try); + /* UV2: wait_completion() may change the bcp->using_desc */ handle_cmplt(completion_stat, bau_desc, bcp, hmaster, stat); @@ -798,6 +934,7 @@ int uv_flush_send_and_wait(struct bau_desc *bau_desc, } cpu_relax(); } while ((completion_stat == FLUSH_RETRY_PLUGGED) || + (completion_stat == FLUSH_RETRY_BUSYBUG) || (completion_stat == FLUSH_RETRY_TIMEOUT)); time2 = get_cycles(); @@ -812,6 +949,7 @@ int uv_flush_send_and_wait(struct bau_desc *bau_desc, record_send_stats(time1, time2, bcp, stat, completion_stat, try); if (completion_stat == FLUSH_GIVEUP) + /* FLUSH_GIVEUP will fall back to using IPI's for tlb flush */ return 1; return 0; } @@ -967,7 +1105,7 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask, stat->s_ntargself++; bau_desc = bcp->descriptor_base; - bau_desc += ITEMS_PER_DESC * bcp->uvhub_cpu; + bau_desc += (ITEMS_PER_DESC * bcp->using_desc); bau_uvhubs_clear(&bau_desc->distribution, UV_DISTRIBUTION_SIZE); if (set_distrib_bits(flush_mask, bcp, bau_desc, &locals, &remotes)) return NULL; @@ -980,13 +1118,86 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask, * uv_flush_send_and_wait returns 0 if all cpu's were messaged, * or 1 if it gave up and the original cpumask should be returned. */ - if (!uv_flush_send_and_wait(bau_desc, flush_mask, bcp)) + if (!uv_flush_send_and_wait(flush_mask, bcp)) return NULL; else return cpumask; } /* + * Search the message queue for any 'other' message with the same software + * acknowledge resource bit vector. + */ +struct bau_pq_entry *find_another_by_swack(struct bau_pq_entry *msg, + struct bau_control *bcp, unsigned char swack_vec) +{ + struct bau_pq_entry *msg_next = msg + 1; + + if (msg_next > bcp->queue_last) + msg_next = bcp->queue_first; + while ((msg_next->swack_vec != 0) && (msg_next != msg)) { + if (msg_next->swack_vec == swack_vec) + return msg_next; + msg_next++; + if (msg_next > bcp->queue_last) + msg_next = bcp->queue_first; + } + return NULL; +} + +/* + * UV2 needs to work around a bug in which an arriving message has not + * set a bit in the UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE register. + * Such a message must be ignored. + */ +void process_uv2_message(struct msg_desc *mdp, struct bau_control *bcp) +{ + unsigned long mmr_image; + unsigned char swack_vec; + struct bau_pq_entry *msg = mdp->msg; + struct bau_pq_entry *other_msg; + + mmr_image = read_mmr_sw_ack(); + swack_vec = msg->swack_vec; + + if ((swack_vec & mmr_image) == 0) { + /* + * This message was assigned a swack resource, but no + * reserved acknowlegment is pending. + * The bug has prevented this message from setting the MMR. + * And no other message has used the same sw_ack resource. + * Do the requested shootdown but do not reply to the msg. + * (the 0 means make no acknowledge) + */ + bau_process_message(mdp, bcp, 0); + return; + } + + /* + * Some message has set the MMR 'pending' bit; it might have been + * another message. Look for that message. + */ + other_msg = find_another_by_swack(msg, bcp, msg->swack_vec); + if (other_msg) { + /* There is another. Do not ack the current one. */ + bau_process_message(mdp, bcp, 0); + /* + * Let the natural processing of that message acknowledge + * it. Don't get the processing of sw_ack's out of order. + */ + return; + } + + /* + * There is no other message using this sw_ack, so it is safe to + * acknowledge it. + */ + bau_process_message(mdp, bcp, 1); + + return; +} + +/* * The BAU message interrupt comes here. (registered by set_intr_gate) * See entry_64.S * @@ -1009,6 +1220,7 @@ void uv_bau_message_interrupt(struct pt_regs *regs) struct ptc_stats *stat; struct msg_desc msgdesc; + ack_APIC_irq(); time_start = get_cycles(); bcp = &per_cpu(bau_control, smp_processor_id()); @@ -1022,9 +1234,11 @@ void uv_bau_message_interrupt(struct pt_regs *regs) count++; msgdesc.msg_slot = msg - msgdesc.queue_first; - msgdesc.swack_slot = ffs(msg->swack_vec) - 1; msgdesc.msg = msg; - bau_process_message(&msgdesc, bcp); + if (bcp->uvhub_version == 2) + process_uv2_message(&msgdesc, bcp); + else + bau_process_message(&msgdesc, bcp, 1); msg++; if (msg > msgdesc.queue_last) @@ -1036,8 +1250,6 @@ void uv_bau_message_interrupt(struct pt_regs *regs) stat->d_nomsg++; else if (count > 1) stat->d_multmsg++; - - ack_APIC_irq(); } /* @@ -1083,7 +1295,7 @@ static void __init enable_timeouts(void) */ mmr_image |= (1L << SOFTACK_MSHIFT); if (is_uv2_hub()) { - mmr_image |= (1L << UV2_LEG_SHFT); + mmr_image &= ~(1L << UV2_LEG_SHFT); mmr_image |= (1L << UV2_EXT_SHFT); } write_mmr_misc_control(pnode, mmr_image); @@ -1136,13 +1348,13 @@ static int ptc_seq_show(struct seq_file *file, void *data) seq_printf(file, "remotehub numuvhubs numuvhubs16 numuvhubs8 "); seq_printf(file, - "numuvhubs4 numuvhubs2 numuvhubs1 dto retries rok "); + "numuvhubs4 numuvhubs2 numuvhubs1 dto snacks retries rok "); seq_printf(file, "resetp resett giveup sto bz throt swack recv rtime "); seq_printf(file, "all one mult none retry canc nocan reset rcan "); seq_printf(file, - "disable enable\n"); + "disable enable wars warshw warwaits\n"); } if (cpu < num_possible_cpus() && cpu_online(cpu)) { stat = &per_cpu(ptcstats, cpu); @@ -1154,10 +1366,10 @@ static int ptc_seq_show(struct seq_file *file, void *data) stat->s_ntargremotes, stat->s_ntargcpu, stat->s_ntarglocaluvhub, stat->s_ntargremoteuvhub, stat->s_ntarguvhub, stat->s_ntarguvhub16); - seq_printf(file, "%ld %ld %ld %ld %ld ", + seq_printf(file, "%ld %ld %ld %ld %ld %ld ", stat->s_ntarguvhub8, stat->s_ntarguvhub4, stat->s_ntarguvhub2, stat->s_ntarguvhub1, - stat->s_dtimeout); + stat->s_dtimeout, stat->s_strongnacks); seq_printf(file, "%ld %ld %ld %ld %ld %ld %ld %ld ", stat->s_retry_messages, stat->s_retriesok, stat->s_resets_plug, stat->s_resets_timeout, @@ -1173,8 +1385,10 @@ static int ptc_seq_show(struct seq_file *file, void *data) stat->d_nomsg, stat->d_retries, stat->d_canceled, stat->d_nocanceled, stat->d_resets, stat->d_rcanceled); - seq_printf(file, "%ld %ld\n", - stat->s_bau_disabled, stat->s_bau_reenabled); + seq_printf(file, "%ld %ld %ld %ld %ld\n", + stat->s_bau_disabled, stat->s_bau_reenabled, + stat->s_uv2_wars, stat->s_uv2_wars_hw, + stat->s_uv2_war_waits); } return 0; } @@ -1432,12 +1646,15 @@ static void activation_descriptor_init(int node, int pnode, int base_pnode) { int i; int cpu; + int uv1 = 0; unsigned long gpa; unsigned long m; unsigned long n; size_t dsize; struct bau_desc *bau_desc; struct bau_desc *bd2; + struct uv1_bau_msg_header *uv1_hdr; + struct uv2_bau_msg_header *uv2_hdr; struct bau_control *bcp; /* @@ -1451,6 +1668,8 @@ static void activation_descriptor_init(int node, int pnode, int base_pnode) gpa = uv_gpa(bau_desc); n = uv_gpa_to_gnode(gpa); m = uv_gpa_to_offset(gpa); + if (is_uv1_hub()) + uv1 = 1; /* the 14-bit pnode */ write_mmr_descriptor_base(pnode, (n << UV_DESC_PSHIFT | m)); @@ -1461,21 +1680,33 @@ static void activation_descriptor_init(int node, int pnode, int base_pnode) */ for (i = 0, bd2 = bau_desc; i < (ADP_SZ * ITEMS_PER_DESC); i++, bd2++) { memset(bd2, 0, sizeof(struct bau_desc)); - bd2->header.swack_flag = 1; - /* - * The base_dest_nasid set in the message header is the nasid - * of the first uvhub in the partition. The bit map will - * indicate destination pnode numbers relative to that base. - * They may not be consecutive if nasid striding is being used. - */ - bd2->header.base_dest_nasid = UV_PNODE_TO_NASID(base_pnode); - bd2->header.dest_subnodeid = UV_LB_SUBNODEID; - bd2->header.command = UV_NET_ENDPOINT_INTD; - bd2->header.int_both = 1; - /* - * all others need to be set to zero: - * fairness chaining multilevel count replied_to - */ + if (uv1) { + uv1_hdr = &bd2->header.uv1_hdr; + uv1_hdr->swack_flag = 1; + /* + * The base_dest_nasid set in the message header + * is the nasid of the first uvhub in the partition. + * The bit map will indicate destination pnode numbers + * relative to that base. They may not be consecutive + * if nasid striding is being used. + */ + uv1_hdr->base_dest_nasid = + UV_PNODE_TO_NASID(base_pnode); + uv1_hdr->dest_subnodeid = UV_LB_SUBNODEID; + uv1_hdr->command = UV_NET_ENDPOINT_INTD; + uv1_hdr->int_both = 1; + /* + * all others need to be set to zero: + * fairness chaining multilevel count replied_to + */ + } else { + uv2_hdr = &bd2->header.uv2_hdr; + uv2_hdr->swack_flag = 1; + uv2_hdr->base_dest_nasid = + UV_PNODE_TO_NASID(base_pnode); + uv2_hdr->dest_subnodeid = UV_LB_SUBNODEID; + uv2_hdr->command = UV_NET_ENDPOINT_INTD; + } } for_each_present_cpu(cpu) { if (pnode != uv_blade_to_pnode(uv_cpu_to_blade_id(cpu))) @@ -1531,6 +1762,7 @@ static void pq_init(int node, int pnode) write_mmr_payload_first(pnode, pn_first); write_mmr_payload_tail(pnode, first); write_mmr_payload_last(pnode, last); + write_gmmr_sw_ack(pnode, 0xffffUL); /* in effect, all msg_type's are set to MSG_NOOP */ memset(pqp, 0, sizeof(struct bau_pq_entry) * DEST_Q_SIZE); @@ -1584,14 +1816,14 @@ static int calculate_destination_timeout(void) ts_ns = base * mult1 * mult2; ret = ts_ns / 1000; } else { - /* 4 bits 0/1 for 10/80us, 3 bits of multiplier */ - mmr_image = uv_read_local_mmr(UVH_AGING_PRESCALE_SEL); + /* 4 bits 0/1 for 10/80us base, 3 bits of multiplier */ + mmr_image = uv_read_local_mmr(UVH_LB_BAU_MISC_CONTROL); mmr_image = (mmr_image & UV_SA_MASK) >> UV_SA_SHFT; if (mmr_image & (1L << UV2_ACK_UNITS_SHFT)) - mult1 = 80; + base = 80; else - mult1 = 10; - base = mmr_image & UV2_ACK_MASK; + base = 10; + mult1 = mmr_image & UV2_ACK_MASK; ret = mult1 * base; } return ret; @@ -1618,6 +1850,7 @@ static void __init init_per_cpu_tunables(void) bcp->cong_response_us = congested_respns_us; bcp->cong_reps = congested_reps; bcp->cong_period = congested_period; + bcp->clocks_per_100_usec = usec_2_cycles(100); } } @@ -1728,8 +1961,17 @@ static int scan_sock(struct socket_desc *sdp, struct uvhub_desc *bdp, bcp->cpus_in_socket = sdp->num_cpus; bcp->socket_master = *smasterp; bcp->uvhub = bdp->uvhub; + if (is_uv1_hub()) + bcp->uvhub_version = 1; + else if (is_uv2_hub()) + bcp->uvhub_version = 2; + else { + printk(KERN_EMERG "uvhub version not 1 or 2\n"); + return 1; + } bcp->uvhub_master = *hmasterp; bcp->uvhub_cpu = uv_cpu_hub_info(cpu)->blade_processor_id; + bcp->using_desc = bcp->uvhub_cpu; if (bcp->uvhub_cpu >= MAX_CPUS_PER_UVHUB) { printk(KERN_EMERG "%d cpus per uvhub invalid\n", bcp->uvhub_cpu); @@ -1845,6 +2087,8 @@ static int __init uv_bau_init(void) uv_base_pnode = uv_blade_to_pnode(uvhub); } + enable_timeouts(); + if (init_per_cpu(nuvhubs, uv_base_pnode)) { nobau = 1; return 0; @@ -1855,7 +2099,6 @@ static int __init uv_bau_init(void) if (uv_blade_nr_possible_cpus(uvhub)) init_uvhub(uvhub, vector, uv_base_pnode); - enable_timeouts(); alloc_intr_gate(vector, uv_bau_message_intr1); for_each_possible_blade(uvhub) { @@ -1867,7 +2110,8 @@ static int __init uv_bau_init(void) val = 1L << 63; write_gmmr_activation(pnode, val); mmr = 1; /* should be 1 to broadcast to both sockets */ - write_mmr_data_broadcast(pnode, mmr); + if (!is_uv1_hub()) + write_mmr_data_broadcast(pnode, mmr); } } diff --git a/arch/x86/um/shared/sysdep/ptrace.h b/arch/x86/um/shared/sysdep/ptrace.h index 711b1621747f..2bbe1ec2d96a 100644 --- a/arch/x86/um/shared/sysdep/ptrace.h +++ b/arch/x86/um/shared/sysdep/ptrace.h @@ -1,5 +1,15 @@ +#ifndef __SYSDEP_X86_PTRACE_H +#define __SYSDEP_X86_PTRACE_H + #ifdef __i386__ #include "ptrace_32.h" #else #include "ptrace_64.h" #endif + +static inline long regs_return_value(struct uml_pt_regs *regs) +{ + return UPT_SYSCALL_RET(regs); +} + +#endif /* __SYSDEP_X86_PTRACE_H */ diff --git a/arch/xtensa/kernel/ptrace.c b/arch/xtensa/kernel/ptrace.c index a0d042aa2967..2dff698ab02e 100644 --- a/arch/xtensa/kernel/ptrace.c +++ b/arch/xtensa/kernel/ptrace.c @@ -334,8 +334,7 @@ void do_syscall_trace_enter(struct pt_regs *regs) do_syscall_trace(); #if 0 - if (unlikely(current->audit_context)) - audit_syscall_entry(current, AUDIT_ARCH_XTENSA..); + audit_syscall_entry(current, AUDIT_ARCH_XTENSA..); #endif } |