diff options
Diffstat (limited to 'arch')
26 files changed, 42 insertions, 42 deletions
diff --git a/arch/cris/arch-v10/boot/compressed/misc.c b/arch/cris/arch-v10/boot/compressed/misc.c index ffb8d21b2f83..e205d2e7e089 100644 --- a/arch/cris/arch-v10/boot/compressed/misc.c +++ b/arch/cris/arch-v10/boot/compressed/misc.c @@ -8,7 +8,7 @@ * * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994 * puts by Nick Holloway 1993, better puts by Martin Mares 1995 - * adoptation for Linux/CRIS Axis Communications AB, 1999 + * adaptation for Linux/CRIS Axis Communications AB, 1999 * */ diff --git a/arch/cris/arch-v10/kernel/debugport.c b/arch/cris/arch-v10/kernel/debugport.c index 2b536ca6f444..93679a48c791 100644 --- a/arch/cris/arch-v10/kernel/debugport.c +++ b/arch/cris/arch-v10/kernel/debugport.c @@ -83,7 +83,7 @@ * * Revision 1.4 2002/11/19 14:35:24 starvik * Changes from linux 2.4 - * Changed struct initializer syntax to the currently prefered notation + * Changed struct initializer syntax to the currently preferred notation * * Revision 1.3 2002/11/06 09:47:03 starvik * Modified for new interrupt macros diff --git a/arch/cris/arch-v10/kernel/fasttimer.c b/arch/cris/arch-v10/kernel/fasttimer.c index 8cbdf594b369..d3ea052e5ee1 100644 --- a/arch/cris/arch-v10/kernel/fasttimer.c +++ b/arch/cris/arch-v10/kernel/fasttimer.c @@ -84,7 +84,7 @@ * with time based on jiffies and *R_TIMER0_DATA, uses a table * for fast conversion of timer value to microseconds. * (Much faster the standard do_gettimeofday() and we don't really - * wan't to use the true time - we wan't the "uptime" so timers don't screw up + * want to use the true time - we want the "uptime" so timers don't screw up * when we change the time. * TODO: Add efficient support for continuous timers as well. * diff --git a/arch/cris/arch-v10/kernel/irq.c b/arch/cris/arch-v10/kernel/irq.c index 96094cbf1255..845c95f6e871 100644 --- a/arch/cris/arch-v10/kernel/irq.c +++ b/arch/cris/arch-v10/kernel/irq.c @@ -169,7 +169,7 @@ init_IRQ(void) for (i = 0; i < 256; i++) etrax_irv->v[i] = weird_irq; - /* Initialize IRQ handler descriptiors. */ + /* Initialize IRQ handler descriptors. */ for(i = 2; i < NR_IRQS; i++) { irq_desc[i].chip = &crisv10_irq_type; set_int_vector(i, interrupt[i]); diff --git a/arch/cris/arch-v10/kernel/process.c b/arch/cris/arch-v10/kernel/process.c index b6831ceb6a62..1a3760c94f85 100644 --- a/arch/cris/arch-v10/kernel/process.c +++ b/arch/cris/arch-v10/kernel/process.c @@ -64,7 +64,7 @@ void hard_reset_now (void) #if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM) cause_of_death = 0xbedead; #else - /* Since we dont plan to keep on reseting the watchdog, + /* Since we dont plan to keep on resetting the watchdog, the key can be arbitrary hence three */ *R_WATCHDOG = IO_FIELD(R_WATCHDOG, key, 3) | IO_STATE(R_WATCHDOG, enable, start); diff --git a/arch/cris/arch-v10/kernel/shadows.c b/arch/cris/arch-v10/kernel/shadows.c index 38fd44dfbc5b..326178aef6ee 100644 --- a/arch/cris/arch-v10/kernel/shadows.c +++ b/arch/cris/arch-v10/kernel/shadows.c @@ -20,7 +20,7 @@ unsigned long r_timer_ctrl_shadow; * These are only usable if there actually IS a latch connected * to the corresponding external chip-select pin. * - * A common usage is that CSP0 controls LED's and CSP4 video chips. + * A common usage is that CSP0 controls LEDs and CSP4 video chips. */ unsigned long port_cse1_shadow; diff --git a/arch/cris/arch-v10/lib/string.c b/arch/cris/arch-v10/lib/string.c index 8ffde4901b57..15d6662b03b1 100644 --- a/arch/cris/arch-v10/lib/string.c +++ b/arch/cris/arch-v10/lib/string.c @@ -41,7 +41,7 @@ void *memcpy(void *pdst, Make sure the compiler is able to make something useful of this. As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop). - If gcc was allright, it really would need no temporaries, and no + If gcc was alright, it really would need no temporaries, and no stack space to save stuff on. */ register void *return_dst __asm__ ("r10") = pdst; diff --git a/arch/cris/arch-v10/lib/usercopy.c b/arch/cris/arch-v10/lib/usercopy.c index 43778d53c254..a12c708afc9a 100644 --- a/arch/cris/arch-v10/lib/usercopy.c +++ b/arch/cris/arch-v10/lib/usercopy.c @@ -38,7 +38,7 @@ __copy_user (void __user *pdst, const void *psrc, unsigned long pn) As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop). FIXME: Comment for old gcc version. Check. - If gcc was allright, it really would need no temporaries, and no + If gcc was alright, it really would need no temporaries, and no stack space to save stuff on. */ register char *dst __asm__ ("r13") = pdst; @@ -200,7 +200,7 @@ __copy_user_zeroing (void __user *pdst, const void *psrc, unsigned long pn) As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop). FIXME: Comment for old gcc version. Check. - If gcc was allright, it really would need no temporaries, and no + If gcc was alright, it really would need no temporaries, and no stack space to save stuff on. */ register char *dst __asm__ ("r13") = pdst; @@ -380,7 +380,7 @@ __do_clear_user (void __user *pto, unsigned long pn) As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop). FIXME: Comment for old gcc version. Check. - If gcc was allright, it really would need no temporaries, and no + If gcc was alright, it really would need no temporaries, and no stack space to save stuff on. */ register char *dst __asm__ ("r13") = pto; diff --git a/arch/cris/arch-v32/boot/compressed/misc.c b/arch/cris/arch-v32/boot/compressed/misc.c index 11902697196d..0169ba1ca9c9 100644 --- a/arch/cris/arch-v32/boot/compressed/misc.c +++ b/arch/cris/arch-v32/boot/compressed/misc.c @@ -8,7 +8,7 @@ * * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994 * puts by Nick Holloway 1993, better puts by Martin Mares 1995 - * adoptation for Linux/CRIS Axis Communications AB, 1999 + * adaptation for Linux/CRIS Axis Communications AB, 1999 * */ @@ -151,7 +151,7 @@ serout(const char *s, reg_scope_instances regi_ser) do { rs = REG_RD(ser, regi_ser, rs_stat_din); } - while (!rs.tr_rdy);/* Wait for tranceiver. */ + while (!rs.tr_rdy);/* Wait for transceiver. */ REG_WR(ser, regi_ser, rw_dout, dout); } @@ -264,7 +264,7 @@ serial_setup(reg_scope_instances regi_ser) tr_ctrl.stop_bits = 1; /* 2 stop bits. */ /* - * The baudrate setup is a bit fishy, but in the end the tranceiver is + * The baudrate setup is a bit fishy, but in the end the transceiver is * set to 4800 and the receiver to 115200. The magic value is * 29.493 MHz. */ diff --git a/arch/cris/arch-v32/drivers/axisflashmap.c b/arch/cris/arch-v32/drivers/axisflashmap.c index 5180d45412fc..3ec12ea44e8e 100644 --- a/arch/cris/arch-v32/drivers/axisflashmap.c +++ b/arch/cris/arch-v32/drivers/axisflashmap.c @@ -205,7 +205,7 @@ static struct mtd_info *probe_cs(struct map_info *map_cs) /* * Probe each chip select individually for flash chips. If there are chips on * both cse0 and cse1, the mtd_info structs will be concatenated to one struct - * so that MTD partitions can cross chip boundries. + * so that MTD partitions can cross chip boundaries. * * The only known restriction to how you can mount your chips is that each * chip select must hold similar flash chips. But you need external hardware diff --git a/arch/cris/arch-v32/drivers/i2c.c b/arch/cris/arch-v32/drivers/i2c.c index e12f6cc6f4a2..f1edd2e359b2 100644 --- a/arch/cris/arch-v32/drivers/i2c.c +++ b/arch/cris/arch-v32/drivers/i2c.c @@ -275,7 +275,7 @@ i2c_getack(void) ack = 0; i2c_delay(CLOCK_HIGH_TIME/2); if(!ack){ - if(!i2c_getbit()) /* receiver pulld SDA low */ + if(!i2c_getbit()) /* receiver pulled SDA low */ ack = 1; i2c_delay(CLOCK_HIGH_TIME/2); } diff --git a/arch/cris/arch-v32/drivers/nandflash.c b/arch/cris/arch-v32/drivers/nandflash.c index 93ddea4d9564..5ce015c6bb0d 100644 --- a/arch/cris/arch-v32/drivers/nandflash.c +++ b/arch/cris/arch-v32/drivers/nandflash.c @@ -138,7 +138,7 @@ struct mtd_info* __init crisv32_nand_flash_probe (void) /* Enable the following for a flash based bad block table */ this->options = NAND_USE_FLASH_BBT; - /* Scan to find existance of the device */ + /* Scan to find existence of the device */ if (nand_scan (crisv32_mtd, 1)) { err = -ENXIO; goto out_ior; diff --git a/arch/cris/arch-v32/kernel/fasttimer.c b/arch/cris/arch-v32/kernel/fasttimer.c index 79e1e4c2ca1d..b40551f9f40d 100644 --- a/arch/cris/arch-v32/kernel/fasttimer.c +++ b/arch/cris/arch-v32/kernel/fasttimer.c @@ -97,7 +97,7 @@ * with time based on jiffies and *R_TIMER0_DATA, uses a table * for fast conversion of timer value to microseconds. * (Much faster the standard do_gettimeofday() and we don't really - * wan't to use the true time - we wan't the "uptime" so timers don't screw up + * want to use the true time - we want the "uptime" so timers don't screw up * when we change the time. * TODO: Add efficient support for continuous timers as well. * diff --git a/arch/cris/arch-v32/kernel/irq.c b/arch/cris/arch-v32/kernel/irq.c index cc361bf578ae..a9acaa270243 100644 --- a/arch/cris/arch-v32/kernel/irq.c +++ b/arch/cris/arch-v32/kernel/irq.c @@ -140,7 +140,7 @@ block_irq(int irq, int cpu) spin_lock_irqsave(&irq_lock, flags); intr_mask = REG_RD_INT(intr_vect, irq_regs[cpu], rw_mask); - /* Remember; 1 let thru, 0 block. */ + /* Remember; 1 let through, 0 block. */ intr_mask &= ~(1 << (irq - FIRST_IRQ)); REG_WR_INT(intr_vect, irq_regs[cpu], rw_mask, intr_mask); @@ -156,7 +156,7 @@ unblock_irq(int irq, int cpu) spin_lock_irqsave(&irq_lock, flags); intr_mask = REG_RD_INT(intr_vect, irq_regs[cpu], rw_mask); - /* Remember; 1 let thru, 0 block. */ + /* Remember; 1 let through, 0 block. */ intr_mask |= (1 << (irq - FIRST_IRQ)); REG_WR_INT(intr_vect, irq_regs[cpu], rw_mask, intr_mask); @@ -308,7 +308,7 @@ crisv32_do_multiple(struct pt_regs* regs) */ irq_enter(); - /* Get which IRQs that happend. */ + /* Get which IRQs that happened. */ masked = REG_RD_INT(intr_vect, irq_regs[cpu], r_masked_vect); /* Calculate new IRQ mask with these IRQs disabled. */ @@ -366,7 +366,7 @@ init_IRQ(void) for (i = 0; i < 256; i++) etrax_irv->v[i] = weird_irq; - /* Point all IRQ's to bad handlers. */ + /* Point all IRQs to bad handlers. */ for (i = FIRST_IRQ, j = 0; j < NR_IRQS; i++, j++) { irq_desc[j].chip = &crisv32_irq_type; set_exception_vector(i, interrupt[j]); diff --git a/arch/cris/arch-v32/kernel/process.c b/arch/cris/arch-v32/kernel/process.c index 6326351af252..b72a15580dc7 100644 --- a/arch/cris/arch-v32/kernel/process.c +++ b/arch/cris/arch-v32/kernel/process.c @@ -162,7 +162,7 @@ copy_thread(int nr, unsigned long clone_flags, unsigned long usp, /* Put the switch stack right below the pt_regs. */ swstack = ((struct switch_stack *) childregs) - 1; - /* Paramater to ret_from_sys_call. 0 is don't restart the syscall. */ + /* Parameter to ret_from_sys_call. 0 is don't restart the syscall. */ swstack->r9 = 0; /* diff --git a/arch/cris/arch-v32/kernel/signal.c b/arch/cris/arch-v32/kernel/signal.c index 7cd6ac803409..024cc6901974 100644 --- a/arch/cris/arch-v32/kernel/signal.c +++ b/arch/cris/arch-v32/kernel/signal.c @@ -347,7 +347,7 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size) /* Grab and setup a signal frame. * * Basically a lot of state-info is stacked, and arranged for the - * user-mode program to return to the kernel using either a trampiline + * user-mode program to return to the kernel using either a trampoline * which performs the syscall sigreturn(), or a provided user-mode * trampoline. */ @@ -641,7 +641,7 @@ ugdb_trap_user(struct thread_info *ti, int sig) user_regs(ti)->spc = 0; } /* FIXME: Filter out false h/w breakpoint hits (i.e. EDA - not withing any configured h/w breakpoint range). Synchronize with + not within any configured h/w breakpoint range). Synchronize with what already exists for kernel debugging. */ if (((user_regs(ti)->exs & 0xff00) >> 8) == BREAK_8_INTR_VECT) { /* Break 8: subtract 2 from ERP unless in a delay slot. */ diff --git a/arch/cris/arch-v32/kernel/smp.c b/arch/cris/arch-v32/kernel/smp.c index 697494bc2de1..171c96e0a5d3 100644 --- a/arch/cris/arch-v32/kernel/smp.c +++ b/arch/cris/arch-v32/kernel/smp.c @@ -142,7 +142,7 @@ smp_boot_one_cpu(int cpuid) return -1; } -/* Secondary CPUs starts uing C here. Here we need to setup CPU +/* Secondary CPUs starts using C here. Here we need to setup CPU * specific stuff such as the local timer and the MMU. */ void __init smp_callin(void) { diff --git a/arch/cris/arch-v32/kernel/time.c b/arch/cris/arch-v32/kernel/time.c index be0a01657d4f..2f7e8e200f2c 100644 --- a/arch/cris/arch-v32/kernel/time.c +++ b/arch/cris/arch-v32/kernel/time.c @@ -99,7 +99,7 @@ unsigned long do_slow_gettimeoffset(void) /* From timer MDS describing the hardware watchdog: * 4.3.1 Watchdog Operation * The watchdog timer is an 8-bit timer with a configurable start value. - * Once started the whatchdog counts downwards with a frequency of 763 Hz + * Once started the watchdog counts downwards with a frequency of 763 Hz * (100/131072 MHz). When the watchdog counts down to 1, it generates an * NMI (Non Maskable Interrupt), and when it counts down to 0, it resets the * chip. diff --git a/arch/cris/arch-v32/kernel/traps.c b/arch/cris/arch-v32/kernel/traps.c index 2462b1ef1fbb..17fd3dbd1c80 100644 --- a/arch/cris/arch-v32/kernel/traps.c +++ b/arch/cris/arch-v32/kernel/traps.c @@ -105,7 +105,7 @@ bad_value: /* * This gets called from entry.S when the watchdog has bitten. Show something - * similiar to an Oops dump, and if the kernel if configured to be a nice doggy; + * similar to an Oops dump, and if the kernel is configured to be a nice doggy; * halt instead of reboot. */ void diff --git a/arch/cris/arch-v32/lib/string.c b/arch/cris/arch-v32/lib/string.c index 98e282ac824a..6740b2cebae5 100644 --- a/arch/cris/arch-v32/lib/string.c +++ b/arch/cris/arch-v32/lib/string.c @@ -41,7 +41,7 @@ void *memcpy(void *pdst, Make sure the compiler is able to make something useful of this. As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop). - If gcc was allright, it really would need no temporaries, and no + If gcc was alright, it really would need no temporaries, and no stack space to save stuff on. */ register void *return_dst __asm__ ("r10") = pdst; diff --git a/arch/cris/arch-v32/lib/usercopy.c b/arch/cris/arch-v32/lib/usercopy.c index f0b08460c1be..04d0cf35a276 100644 --- a/arch/cris/arch-v32/lib/usercopy.c +++ b/arch/cris/arch-v32/lib/usercopy.c @@ -34,7 +34,7 @@ __copy_user (void __user *pdst, const void *psrc, unsigned long pn) As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop). FIXME: Comment for old gcc version. Check. - If gcc was allright, it really would need no temporaries, and no + If gcc was alright, it really would need no temporaries, and no stack space to save stuff on. */ register char *dst __asm__ ("r13") = pdst; @@ -168,7 +168,7 @@ __copy_user_zeroing (void __user *pdst, const void *psrc, unsigned long pn) As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop). FIXME: Comment for old gcc version. Check. - If gcc was allright, it really would need no temporaries, and no + If gcc was alright, it really would need no temporaries, and no stack space to save stuff on. */ register char *dst __asm__ ("r13") = pdst; @@ -332,7 +332,7 @@ __do_clear_user (void __user *pto, unsigned long pn) As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop). FIXME: Comment for old gcc version. Check. - If gcc was allright, it really would need no temporaries, and no + If gcc was alright, it really would need no temporaries, and no stack space to save stuff on. */ register char *dst __asm__ ("r13") = pto; diff --git a/arch/cris/arch-v32/mm/tlb.c b/arch/cris/arch-v32/mm/tlb.c index c2d12e9c40d7..a076ef6e9389 100644 --- a/arch/cris/arch-v32/mm/tlb.c +++ b/arch/cris/arch-v32/mm/tlb.c @@ -30,8 +30,8 @@ do { \ * The TLB can host up to 256 different mm contexts at the same time. The running * context is found in the PID register. Each TLB entry contains a page_id that * has to match the PID register to give a hit. page_id_map keeps track of which - * mm's is assigned to which page_id's, making sure it's known when to - * invalidate TLB entries. + * mm is assigned to which page_id, making sure it's known when to invalidate TLB + * entries. * * The last page_id is never running, it is used as an invalid page_id so that * it's possible to make TLB entries that will nerver match. @@ -188,7 +188,7 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next, spin_unlock(&mmu_context_lock); /* - * Remember the pgd for the fault handlers. Keep a seperate copy of it + * Remember the pgd for the fault handlers. Keep a separate copy of it * because current and active_mm might be invalid at points where * there's still a need to derefer the pgd. */ diff --git a/arch/cris/kernel/irq.c b/arch/cris/kernel/irq.c index 903ea62c6e21..5c27ff86121b 100644 --- a/arch/cris/kernel/irq.c +++ b/arch/cris/kernel/irq.c @@ -7,7 +7,7 @@ * Authors: Bjorn Wesen (bjornw@axis.com) * * This file contains the code used by various IRQ handling routines: - * asking for different IRQ's should be done through these routines + * asking for different IRQs should be done through these routines * instead of just grabbing them. Thus setups with different IRQ numbers * shouldn't result in any weird surprises, and installing new handlers * should be easier. @@ -15,7 +15,7 @@ */ /* - * IRQ's are in fact implemented a bit like signal handlers for the kernel. + * IRQs are in fact implemented a bit like signal handlers for the kernel. * Naturally it's not a 1:1 relation, but there are similarities. */ @@ -83,9 +83,9 @@ skip: /* called by the assembler IRQ entry functions defined in irq.h - * to dispatch the interrupts to registred handlers + * to dispatch the interrupts to registered handlers * interrupts are disabled upon entry - depending on if the - * interrupt was registred with IRQF_DISABLED or not, interrupts + * interrupt was registered with IRQF_DISABLED or not, interrupts * are re-enabled or not. */ diff --git a/arch/cris/mm/fault.c b/arch/cris/mm/fault.c index 8aab81430695..3034f3ff950c 100644 --- a/arch/cris/mm/fault.c +++ b/arch/cris/mm/fault.c @@ -13,7 +13,7 @@ * Fixed warning. * * Revision 1.18 2005/01/12 08:10:14 starvik - * Readded the change of frametype when handling kernel page fault fixup + * Re-added the change of frametype when handling kernel page fault fixup * for v10. This is necessary to avoid that the CPU remakes the faulting * access. * @@ -49,7 +49,7 @@ * * Revision 1.8 2003/07/04 13:02:48 tobiasa * Moved code snippet from arch/cris/mm/fault.c that searches for fixup code - * to seperate function in arch-specific files. + * to separate function in arch-specific files. * * Revision 1.7 2003/01/22 06:48:38 starvik * Fixed warnings issued by GCC 3.2.1 diff --git a/arch/cris/mm/init.c b/arch/cris/mm/init.c index b7842ff213a6..0c833d176226 100644 --- a/arch/cris/mm/init.c +++ b/arch/cris/mm/init.c @@ -8,7 +8,7 @@ * * $Log: init.c,v $ * Revision 1.11 2004/05/28 09:28:56 starvik - * Calculation of loops_per_usec moved because initalization order has changed + * Calculation of loops_per_usec moved because initialization order has changed * in Linux 2.6. * * Revision 1.10 2004/05/14 07:58:05 starvik diff --git a/arch/cris/mm/tlb.c b/arch/cris/mm/tlb.c index c4a98e2e529e..b7f8de576777 100644 --- a/arch/cris/mm/tlb.c +++ b/arch/cris/mm/tlb.c @@ -16,7 +16,7 @@ /* The TLB can host up to 64 different mm contexts at the same time. * The running context is R_MMU_CONTEXT, and each TLB entry contains a * page_id that has to match to give a hit. In page_id_map, we keep track - * of which mm's we have assigned which page_id's, so that we know when + * of which mm we have assigned to which page_id, so that we know when * to invalidate TLB entries. * * The last page_id is never running - it is used as an invalid page_id |