diff options
Diffstat (limited to 'arch')
84 files changed, 525 insertions, 5067 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index cf006d40342c..ce030c242644 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -980,6 +980,7 @@ config PLAT_SPEAR select ARM_AMBA select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP + select COMMON_CLK select CLKSRC_MMIO select GENERIC_CLOCKEVENTS select HAVE_CLK diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts index bf491a332145..fc82b1a26458 100644 --- a/arch/arm/boot/dts/spear300-evb.dts +++ b/arch/arm/boot/dts/spear300-evb.dts @@ -25,6 +25,44 @@ }; ahb { + pinmux@99000000 { + st,pinmux-mode = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + i2c0 { + st,pins = "i2c0_grp"; + st,function = "i2c0"; + }; + ssp0 { + st,pins = "ssp0_grp"; + st,function = "ssp0"; + }; + mii0 { + st,pins = "mii0_grp"; + st,function = "mii0"; + }; + uart0 { + st,pins = "uart0_grp"; + st,function = "uart0"; + }; + clcd { + st,pins = "clcd_pfmode_grp"; + st,function = "clcd"; + }; + sdhci { + st,pins = "sdhci_4bit_grp"; + st,function = "sdhci"; + }; + gpio1 { + st,pins = "gpio1_4_to_7_grp", + "gpio1_0_to_3_grp"; + st,function = "gpio1"; + }; + }; + }; + clcd@60000000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi index f9fcbf4f477b..01c5e358fdb2 100644 --- a/arch/arm/boot/dts/spear300.dtsi +++ b/arch/arm/boot/dts/spear300.dtsi @@ -21,6 +21,11 @@ ranges = <0x60000000 0x60000000 0x50000000 0xd0000000 0xd0000000 0x30000000>; + pinmux@99000000 { + compatible = "st,spear300-pinmux"; + reg = <0x99000000 0x1000>; + }; + clcd@60000000 { compatible = "arm,clcd-pl110", "arm,primecell"; reg = <0x60000000 0x1000>; diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts index f7ecb0c1c6e8..dc5e2d445a93 100644 --- a/arch/arm/boot/dts/spear310-evb.dts +++ b/arch/arm/boot/dts/spear310-evb.dts @@ -25,6 +25,67 @@ }; ahb { + pinmux@b4000000 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + gpio0 { + st,pins = "gpio0_pin0_grp", + "gpio0_pin1_grp", + "gpio0_pin2_grp", + "gpio0_pin3_grp", + "gpio0_pin4_grp", + "gpio0_pin5_grp"; + st,function = "gpio0"; + }; + i2c0 { + st,pins = "i2c0_grp"; + st,function = "i2c0"; + }; + mii0 { + st,pins = "mii0_grp"; + st,function = "mii0"; + }; + ssp0 { + st,pins = "ssp0_grp"; + st,function = "ssp0"; + }; + uart0 { + st,pins = "uart0_grp"; + st,function = "uart0"; + }; + emi { + st,pins = "emi_cs_0_to_5_grp"; + st,function = "emi"; + }; + fsmc { + st,pins = "fsmc_grp"; + st,function = "fsmc"; + }; + uart1 { + st,pins = "uart1_grp"; + st,function = "uart1"; + }; + uart2 { + st,pins = "uart2_grp"; + st,function = "uart2"; + }; + uart3 { + st,pins = "uart3_grp"; + st,function = "uart3"; + }; + uart4 { + st,pins = "uart4_grp"; + st,function = "uart4"; + }; + uart5 { + st,pins = "uart5_grp"; + st,function = "uart5"; + }; + }; + }; + dma@fc400000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi index dc7fa14da846..e47081c494d9 100644 --- a/arch/arm/boot/dts/spear310.dtsi +++ b/arch/arm/boot/dts/spear310.dtsi @@ -22,6 +22,11 @@ 0xb0000000 0xb0000000 0x10000000 0xd0000000 0xd0000000 0x30000000>; + pinmux@b4000000 { + compatible = "st,spear310-pinmux"; + reg = <0xb4000000 0x1000>; + }; + fsmc: flash@44000000 { compatible = "st,spear600-fsmc-nand"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts index 8fb59d805be3..6308fa3bec1e 100644 --- a/arch/arm/boot/dts/spear320-evb.dts +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -25,6 +25,67 @@ }; ahb { + pinmux@b3000000 { + st,pinmux-mode = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + i2c0 { + st,pins = "i2c0_grp"; + st,function = "i2c0"; + }; + mii0 { + st,pins = "mii0_grp"; + st,function = "mii0"; + }; + ssp0 { + st,pins = "ssp0_grp"; + st,function = "ssp0"; + }; + uart0 { + st,pins = "uart0_grp"; + st,function = "uart0"; + }; + sdhci { + st,pins = "sdhci_cd_51_grp"; + st,function = "sdhci"; + }; + i2s { + st,pins = "i2s_grp"; + st,function = "i2s"; + }; + uart1 { + st,pins = "uart1_grp"; + st,function = "uart1"; + }; + uart2 { + st,pins = "uart2_grp"; + st,function = "uart2"; + }; + can0 { + st,pins = "can0_grp"; + st,function = "can0"; + }; + can1 { + st,pins = "can1_grp"; + st,function = "can1"; + }; + mii2 { + st,pins = "mii2_grp"; + st,function = "mii2"; + }; + pwm0_1 { + st,pins = "pwm0_1_pin_14_15_grp"; + st,function = "pwm0_1"; + }; + pwm2 { + st,pins = "pwm2_pin_13_grp"; + st,function = "pwm2"; + }; + }; + }; + clcd@90000000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi index 9a0267a5a0b7..5372ca399b1f 100644 --- a/arch/arm/boot/dts/spear320.dtsi +++ b/arch/arm/boot/dts/spear320.dtsi @@ -18,9 +18,14 @@ #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; - ranges = <0x40000000 0x40000000 0x70000000 + ranges = <0x40000000 0x40000000 0x80000000 0xd0000000 0xd0000000 0x30000000>; + pinmux@b3000000 { + compatible = "st,spear320-pinmux"; + reg = <0xb3000000 0x1000>; + }; + clcd@90000000 { compatible = "arm,clcd-pl110", "arm,primecell"; reg = <0x90000000 0x1000>; diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index b5ac644e12af..6b31cb60daab 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -112,6 +112,7 @@ CONFIG_WATCHDOG=y CONFIG_IMX2_WDT=y CONFIG_MFD_MC13XXX=y CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_MC13783=y CONFIG_REGULATOR_MC13892=y CONFIG_FB=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 889d73ac1ae1..7e84f453e8a6 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -8,8 +8,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_U8500=y -CONFIG_UX500_SOC_DB5500=y -CONFIG_UX500_SOC_DB8500=y CONFIG_MACH_HREFV60=y CONFIG_MACH_SNOWBALL=y CONFIG_MACH_U5500=y @@ -39,7 +37,6 @@ CONFIG_CAIF=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_MISC_DEVICES=y CONFIG_AB8500_PWM=y CONFIG_SENSORS_BH1780=y CONFIG_NETDEVICES=y @@ -65,16 +62,18 @@ CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_NOMADIK=y -CONFIG_I2C=y -CONFIG_I2C_NOMADIK=y CONFIG_SPI=y CONFIG_SPI_PL022=y CONFIG_GPIO_STMPE=y CONFIG_GPIO_TC3589X=y +CONFIG_POWER_SUPPLY=y +CONFIG_AB8500_BM=y +CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL=y CONFIG_MFD_STMPE=y CONFIG_MFD_TC3589X=y CONFIG_AB5500_CORE=y CONFIG_AB8500_CORE=y +CONFIG_REGULATOR=y CONFIG_REGULATOR_AB8500=y # CONFIG_HID_SUPPORT is not set CONFIG_USB_GADGET=y diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 99ce5c955e39..05774e5b1cba 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -1173,7 +1173,6 @@ void __init at91_add_device_serial(void) printk(KERN_INFO "AT91: No default serial console defined.\n"); } #else -void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index dd7f782b0b91..104ca40d8d18 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -23,6 +23,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/clockchips.h> +#include <linux/export.h> #include <asm/mach/time.h> @@ -176,6 +177,7 @@ static struct clock_event_device clkevt = { }; void __iomem *at91_st_base; +EXPORT_SYMBOL_GPL(at91_st_base); void __init at91rm9200_ioremap_st(u32 addr) { diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 11cbaa8946fe..b2e4fe21f346 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -117,7 +117,7 @@ static struct i2c_board_info __initdata ek_i2c_devices[] = { }; #define EK_FLASH_BASE AT91_CHIPSELECT_0 -#define EK_FLASH_SIZE SZ_2M +#define EK_FLASH_SIZE SZ_8M static struct physmap_flash_data ek_flash_data = { .width = 2, diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index c3f994462864..065fed342424 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -85,8 +85,6 @@ static struct resource dm9000_resource[] = { .flags = IORESOURCE_MEM }, [2] = { - .start = AT91_PIN_PC11, - .end = AT91_PIN_PC11, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE, } @@ -130,6 +128,8 @@ static struct sam9_smc_config __initdata dm9000_smc_config = { static void __init ek_add_device_dm9000(void) { + struct resource *r = &dm9000_resource[2]; + /* Configure chip-select 2 (DM9000) */ sam9_smc_configure(0, 2, &dm9000_smc_config); @@ -139,6 +139,7 @@ static void __init ek_add_device_dm9000(void) /* Configure Interrupt pin as input, no pull-up */ at91_set_gpio_input(AT91_PIN_PC11, 0); + r->start = r->end = gpio_to_irq(AT91_PIN_PC11); platform_device_register(&dm9000_device); } #else diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index a0f4d7424cdc..6b692824c988 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -35,6 +35,7 @@ #include "generic.h" void __iomem *at91_pmc_base; +EXPORT_SYMBOL_GPL(at91_pmc_base); /* * There's a lot more which can be done with clocks, including cpufreq diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index 36604782a78f..ea2c57a86ca6 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -25,7 +25,7 @@ extern void __iomem *at91_pmc_base; #define at91_pmc_write(field, value) \ __raw_writel(value, at91_pmc_base + field) #else -.extern at91_aic_base +.extern at91_pmc_base #endif #define AT91_PMC_SCER 0x00 /* System Clock Enable Register */ diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 97cc04dc8073..f44a2e7272e3 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -54,6 +54,7 @@ void __init at91_init_interrupts(unsigned int *priority) } void __iomem *at91_ramc_base[2]; +EXPORT_SYMBOL_GPL(at91_ramc_base); void __init at91_ioremap_ramc(int id, u32 addr, u32 size) { @@ -292,6 +293,7 @@ void __init at91_ioremap_rstc(u32 base_addr) } void __iomem *at91_matrix_base; +EXPORT_SYMBOL_GPL(at91_matrix_base); void __init at91_ioremap_matrix(u32 base_addr) { diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c index 22e4e0a28ad1..adbfb1994582 100644 --- a/arch/arm/mach-bcmring/core.c +++ b/arch/arm/mach-bcmring/core.c @@ -52,8 +52,8 @@ #include <mach/csp/chipcHw_inline.h> #include <mach/csp/tmrHw_reg.h> -static AMBA_APB_DEVICE(uartA, "uarta", MM_ADDR_IO_UARTA, { IRQ_UARTA }, NULL); -static AMBA_APB_DEVICE(uartB, "uartb", MM_ADDR_IO_UARTB, { IRQ_UARTB }, NULL); +static AMBA_APB_DEVICE(uartA, "uartA", 0, MM_ADDR_IO_UARTA, {IRQ_UARTA}, NULL); +static AMBA_APB_DEVICE(uartB, "uartB", 0, MM_ADDR_IO_UARTB, {IRQ_UARTB}, NULL); static struct clk pll1_clk = { .name = "PLL1", diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c index 861ceb8232d6..ed38d03c61f2 100644 --- a/arch/arm/mach-imx/imx27-dt.c +++ b/arch/arm/mach-imx/imx27-dt.c @@ -35,7 +35,7 @@ static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = { static int __init imx27_avic_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { - irq_domain_add_simple(np, 0); + irq_domain_add_legacy(np, 64, 0, 0, &irq_domain_simple_ops, NULL); return 0; } @@ -44,7 +44,9 @@ static int __init imx27_gpio_add_irq_domain(struct device_node *np, { static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; - irq_domain_add_simple(np, gpio_irq_base); + gpio_irq_base -= 32; + irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, + NULL); return 0; } diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index 05250aed61fb..e10f3914fcfe 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -35,7 +35,7 @@ static void imx5_idle(void) } clk_enable(gpc_dvfs_clk); mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); - if (tzic_enable_wake() != 0) + if (!tzic_enable_wake()) cpu_do_idle(); clk_disable(gpc_dvfs_clk); } diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 087dba0df47e..e9cc52d4cb28 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -27,6 +27,7 @@ #include <linux/io.h> #include <linux/spinlock.h> +#include <mach/hardware.h> #include <plat/mux.h> diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c index 6e90665a7c47..fb202af01d0d 100644 --- a/arch/arm/mach-omap1/timer.c +++ b/arch/arm/mach-omap1/timer.c @@ -47,9 +47,9 @@ static int omap1_dm_timer_set_src(struct platform_device *pdev, int n = (pdev->id - 1) << 1; u32 l; - l = __raw_readl(MOD_CONF_CTRL_1) & ~(0x03 << n); + l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n); l |= source << n; - __raw_writel(l, MOD_CONF_CTRL_1); + omap_writel(l, MOD_CONF_CTRL_1); return 0; } diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index a39fc4bbd2b8..130ab00c09a2 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -20,6 +20,7 @@ #include <linux/usb/otg.h> #include <linux/spi/spi.h> #include <linux/i2c/twl.h> +#include <linux/mfd/twl6040.h> #include <linux/gpio_keys.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> @@ -560,7 +561,7 @@ static struct regulator_init_data sdp4430_vusim = { }, }; -static struct twl4030_codec_data twl6040_codec = { +static struct twl6040_codec_data twl6040_codec = { /* single-step ramp for headset and handsfree */ .hs_left_step = 0x0f, .hs_right_step = 0x0f, @@ -568,7 +569,7 @@ static struct twl4030_codec_data twl6040_codec = { .hf_right_step = 0x1d, }; -static struct twl4030_vibra_data twl6040_vibra = { +static struct twl6040_vibra_data twl6040_vibra = { .vibldrv_res = 8, .vibrdrv_res = 3, .viblmotor_res = 10, @@ -577,16 +578,14 @@ static struct twl4030_vibra_data twl6040_vibra = { .vddvibr_uV = 0, /* fixed volt supply - VBAT */ }; -static struct twl4030_audio_data twl6040_audio = { +static struct twl6040_platform_data twl6040_data = { .codec = &twl6040_codec, .vibra = &twl6040_vibra, .audpwron_gpio = 127, - .naudint_irq = OMAP44XX_IRQ_SYS_2N, .irq_base = TWL6040_CODEC_IRQ_BASE, }; static struct twl4030_platform_data sdp4430_twldata = { - .audio = &twl6040_audio, /* Regulators */ .vusim = &sdp4430_vusim, .vaux1 = &sdp4430_vaux1, @@ -617,7 +616,8 @@ static int __init omap4_i2c_init(void) TWL_COMMON_REGULATOR_VCXIO | TWL_COMMON_REGULATOR_VUSB | TWL_COMMON_REGULATOR_CLK32KG); - omap4_pmic_init("twl6030", &sdp4430_twldata); + omap4_pmic_init("twl6030", &sdp4430_twldata, + &twl6040_data, OMAP44XX_IRQ_SYS_2N); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo, ARRAY_SIZE(sdp4430_i2c_3_boardinfo)); diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 74e1687b5170..098d183a0086 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -137,7 +137,7 @@ static struct twl4030_platform_data sdp4430_twldata = { static void __init omap4_i2c_init(void) { - omap4_pmic_init("twl6030", &sdp4430_twldata); + omap4_pmic_init("twl6030", &sdp4430_twldata, NULL, 0); } static void __init omap4_init(void) diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index d8c0e89f0126..1b782ba53433 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -25,6 +25,7 @@ #include <linux/gpio.h> #include <linux/usb/otg.h> #include <linux/i2c/twl.h> +#include <linux/mfd/twl6040.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> #include <linux/wl12xx.h> @@ -284,7 +285,7 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) return 0; } -static struct twl4030_codec_data twl6040_codec = { +static struct twl6040_codec_data twl6040_codec = { /* single-step ramp for headset and handsfree */ .hs_left_step = 0x0f, .hs_right_step = 0x0f, @@ -292,17 +293,14 @@ static struct twl4030_codec_data twl6040_codec = { .hf_right_step = 0x1d, }; -static struct twl4030_audio_data twl6040_audio = { +static struct twl6040_platform_data twl6040_data = { .codec = &twl6040_codec, .audpwron_gpio = 127, - .naudint_irq = OMAP44XX_IRQ_SYS_2N, .irq_base = TWL6040_CODEC_IRQ_BASE, }; /* Panda board uses the common PMIC configuration */ -static struct twl4030_platform_data omap4_panda_twldata = { - .audio = &twl6040_audio, -}; +static struct twl4030_platform_data omap4_panda_twldata; /* * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM @@ -326,7 +324,8 @@ static int __init omap4_panda_i2c_init(void) TWL_COMMON_REGULATOR_VCXIO | TWL_COMMON_REGULATOR_VUSB | TWL_COMMON_REGULATOR_CLK32KG); - omap4_pmic_init("twl6030", &omap4_panda_twldata); + omap4_pmic_init("twl6030", &omap4_panda_twldata, + &twl6040_data, OMAP44XX_IRQ_SYS_2N); omap_register_i2c_bus(2, 400, NULL, 0); /* * Bus 3 is attached to the DVI port where devices like the pico DLP diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 2c27fdb61e66..7144ae651d3d 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1422,6 +1422,9 @@ static int _ocp_softreset(struct omap_hwmod *oh) goto dis_opt_clks; _write_sysconfig(v, oh); + if (oh->class->sysc->srst_udelay) + udelay(oh->class->sysc->srst_udelay); + if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS) omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs) @@ -1903,10 +1906,20 @@ void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs) */ int omap_hwmod_softreset(struct omap_hwmod *oh) { - if (!oh) + u32 v; + int ret; + + if (!oh || !(oh->_sysc_cache)) return -EINVAL; - return _ocp_softreset(oh); + v = oh->_sysc_cache; + ret = _set_softreset(oh, &v); + if (ret) + goto error; + _write_sysconfig(v, oh); + +error: + return ret; } /** diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index a5409ce3f323..a6bde34e443a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -1000,7 +1000,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = { .flags = OMAP_FIREWALL_L4, } }, - .flags = OCPIF_SWSUP_IDLE, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index c4f56cb60d7d..04a3885f4475 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -1049,7 +1049,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = { .slave = &omap2430_dss_venc_hwmod, .clk = "dss_ick", .addr = omap2_dss_venc_addrs, - .flags = OCPIF_SWSUP_IDLE, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 34b9766d1d23..db86ce90c69f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1676,7 +1676,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = { .flags = OMAP_FIREWALL_L4, } }, - .flags = OCPIF_SWSUP_IDLE, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index cc9bd106a854..6abc75753e42 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2594,6 +2594,15 @@ static struct omap_hwmod omap44xx_ipu_hwmod = { static struct omap_hwmod_class_sysconfig omap44xx_iss_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, + /* + * ISS needs 100 OCP clk cycles delay after a softreset before + * accessing sysconfig again. + * The lowest frequency at the moment for L3 bus is 100 MHz, so + * 1usec delay is needed. Add an x2 margin to be safe (2 usecs). + * + * TODO: Indicate errata when available. + */ + .srst_udelay = 2, .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 0cdd359a128e..9fc2f44188cb 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -108,8 +108,14 @@ static void omap_uart_set_noidle(struct platform_device *pdev) static void omap_uart_set_smartidle(struct platform_device *pdev) { struct omap_device *od = to_omap_device(pdev); + u8 idlemode; - omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_SMART); + if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP) + idlemode = HWMOD_IDLEMODE_SMART_WKUP; + else + idlemode = HWMOD_IDLEMODE_SMART; + + omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode); } #else @@ -120,124 +126,8 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX -static struct omap_device_pad default_uart1_pads[] __initdata = { - { - .name = "uart1_cts.uart1_cts", - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, - { - .name = "uart1_rts.uart1_rts", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart1_tx.uart1_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart1_rx.uart1_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, -}; - -static struct omap_device_pad default_uart2_pads[] __initdata = { - { - .name = "uart2_cts.uart2_cts", - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, - { - .name = "uart2_rts.uart2_rts", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart2_tx.uart2_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart2_rx.uart2_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, -}; - -static struct omap_device_pad default_uart3_pads[] __initdata = { - { - .name = "uart3_cts_rctx.uart3_cts_rctx", - .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, - }, - { - .name = "uart3_rts_sd.uart3_rts_sd", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart3_tx_irtx.uart3_tx_irtx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart3_rx_irrx.uart3_rx_irrx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - }, -}; - -static struct omap_device_pad default_omap36xx_uart4_pads[] __initdata = { - { - .name = "gpmc_wait2.uart4_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "gpmc_wait3.uart4_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE2, - .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE2, - }, -}; - -static struct omap_device_pad default_omap4_uart4_pads[] __initdata = { - { - .name = "uart4_tx.uart4_tx", - .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, - }, - { - .name = "uart4_rx.uart4_rx", - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP, - .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - .idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0, - }, -}; - static void omap_serial_fill_default_pads(struct omap_board_data *bdata) { - switch (bdata->id) { - case 0: - bdata->pads = default_uart1_pads; - bdata->pads_cnt = ARRAY_SIZE(default_uart1_pads); - break; - case 1: - bdata->pads = default_uart2_pads; - bdata->pads_cnt = ARRAY_SIZE(default_uart2_pads); - break; - case 2: - bdata->pads = default_uart3_pads; - bdata->pads_cnt = ARRAY_SIZE(default_uart3_pads); - break; - case 3: - if (cpu_is_omap44xx()) { - bdata->pads = default_omap4_uart4_pads; - bdata->pads_cnt = - ARRAY_SIZE(default_omap4_uart4_pads); - } else if (cpu_is_omap3630()) { - bdata->pads = default_omap36xx_uart4_pads; - bdata->pads_cnt = - ARRAY_SIZE(default_omap36xx_uart4_pads); - } - break; - default: - break; - } } #else static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {} diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 4b57757bf9d1..7a7b89304c48 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -37,6 +37,16 @@ static struct i2c_board_info __initdata pmic_i2c_board_info = { .flags = I2C_CLIENT_WAKE, }; +static struct i2c_board_info __initdata omap4_i2c1_board_info[] = { + { + .addr = 0x48, + .flags = I2C_CLIENT_WAKE, + }, + { + I2C_BOARD_INFO("twl6040", 0x4b), + }, +}; + void __init omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data) @@ -49,14 +59,31 @@ void __init omap_pmic_init(int bus, u32 clkrate, omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1); } +void __init omap4_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data, + struct twl6040_platform_data *twl6040_data, int twl6040_irq) +{ + /* PMIC part*/ + strncpy(omap4_i2c1_board_info[0].type, pmic_type, + sizeof(omap4_i2c1_board_info[0].type)); + omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N; + omap4_i2c1_board_info[0].platform_data = pmic_data; + + /* TWL6040 audio IC part */ + omap4_i2c1_board_info[1].irq = twl6040_irq; + omap4_i2c1_board_info[1].platform_data = twl6040_data; + + omap_register_i2c_bus(1, 400, omap4_i2c1_board_info, 2); + +} + void __init omap_pmic_late_init(void) { /* Init the OMAP TWL parameters (if PMIC has been registerd) */ - if (!pmic_i2c_board_info.irq) - return; - - omap3_twl_init(); - omap4_twl_init(); + if (pmic_i2c_board_info.irq) + omap3_twl_init(); + if (omap4_i2c1_board_info[0].irq) + omap4_twl_init(); } #if defined(CONFIG_ARCH_OMAP3) diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h index 275dde8cb27a..09627483a57f 100644 --- a/arch/arm/mach-omap2/twl-common.h +++ b/arch/arm/mach-omap2/twl-common.h @@ -29,6 +29,7 @@ struct twl4030_platform_data; +struct twl6040_platform_data; void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data); @@ -46,12 +47,9 @@ static inline void omap3_pmic_init(const char *pmic_type, omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data); } -static inline void omap4_pmic_init(const char *pmic_type, - struct twl4030_platform_data *pmic_data) -{ - /* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */ - omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data); -} +void omap4_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data, + struct twl6040_platform_data *audio_data, int twl6040_irq); void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, u32 pdata_flags, u32 regulators_flags); diff --git a/arch/arm/mach-spear3xx/Kconfig b/arch/arm/mach-spear3xx/Kconfig index d9fe11cb6f16..8bd37291fa4f 100644 --- a/arch/arm/mach-spear3xx/Kconfig +++ b/arch/arm/mach-spear3xx/Kconfig @@ -7,16 +7,19 @@ if ARCH_SPEAR3XX menu "SPEAr3xx Implementations" config MACH_SPEAR300 bool "SPEAr300 Machine support with Device Tree" + select PINCTRL_SPEAR300 help Supports ST SPEAr300 machine configured via the device-tree config MACH_SPEAR310 bool "SPEAr310 Machine support with Device Tree" + select PINCTRL_SPEAR310 help Supports ST SPEAr310 machine configured via the device-tree config MACH_SPEAR320 bool "SPEAr320 Machine support with Device Tree" + select PINCTRL_SPEAR320 help Supports ST SPEAr320 machine configured via the device-tree endmenu diff --git a/arch/arm/mach-spear3xx/Makefile b/arch/arm/mach-spear3xx/Makefile index 17b5d83cf2d5..8d12faa178fd 100644 --- a/arch/arm/mach-spear3xx/Makefile +++ b/arch/arm/mach-spear3xx/Makefile @@ -3,7 +3,7 @@ # # common files -obj-$(CONFIG_ARCH_SPEAR3XX) += spear3xx.o clock.o +obj-$(CONFIG_ARCH_SPEAR3XX) += spear3xx.o # spear300 specific files obj-$(CONFIG_MACH_SPEAR300) += spear300.o diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c deleted file mode 100644 index cd6c11099083..000000000000 --- a/arch/arm/mach-spear3xx/clock.c +++ /dev/null @@ -1,892 +0,0 @@ -/* - * arch/arm/mach-spear3xx/clock.c - * - * SPEAr3xx machines clock framework source file - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/clkdev.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/of_platform.h> -#include <asm/mach-types.h> -#include <plat/clock.h> -#include <mach/misc_regs.h> -#include <mach/spear.h> - -#define PLL1_CTR (MISC_BASE + 0x008) -#define PLL1_FRQ (MISC_BASE + 0x00C) -#define PLL1_MOD (MISC_BASE + 0x010) -#define PLL2_CTR (MISC_BASE + 0x014) -/* PLL_CTR register masks */ -#define PLL_ENABLE 2 -#define PLL_MODE_SHIFT 4 -#define PLL_MODE_MASK 0x3 -#define PLL_MODE_NORMAL 0 -#define PLL_MODE_FRACTION 1 -#define PLL_MODE_DITH_DSB 2 -#define PLL_MODE_DITH_SSB 3 - -#define PLL2_FRQ (MISC_BASE + 0x018) -/* PLL FRQ register masks */ -#define PLL_DIV_N_SHIFT 0 -#define PLL_DIV_N_MASK 0xFF -#define PLL_DIV_P_SHIFT 8 -#define PLL_DIV_P_MASK 0x7 -#define PLL_NORM_FDBK_M_SHIFT 24 -#define PLL_NORM_FDBK_M_MASK 0xFF -#define PLL_DITH_FDBK_M_SHIFT 16 -#define PLL_DITH_FDBK_M_MASK 0xFFFF - -#define PLL2_MOD (MISC_BASE + 0x01C) -#define PLL_CLK_CFG (MISC_BASE + 0x020) -#define CORE_CLK_CFG (MISC_BASE + 0x024) -/* CORE CLK CFG register masks */ -#define PLL_HCLK_RATIO_SHIFT 10 -#define PLL_HCLK_RATIO_MASK 0x3 -#define HCLK_PCLK_RATIO_SHIFT 8 -#define HCLK_PCLK_RATIO_MASK 0x3 - -#define PERIP_CLK_CFG (MISC_BASE + 0x028) -/* PERIP_CLK_CFG register masks */ -#define UART_CLK_SHIFT 4 -#define UART_CLK_MASK 0x1 -#define FIRDA_CLK_SHIFT 5 -#define FIRDA_CLK_MASK 0x3 -#define GPT0_CLK_SHIFT 8 -#define GPT1_CLK_SHIFT 11 -#define GPT2_CLK_SHIFT 12 -#define GPT_CLK_MASK 0x1 -#define AUX_CLK_PLL3_VAL 0 -#define AUX_CLK_PLL1_VAL 1 - -#define PERIP1_CLK_ENB (MISC_BASE + 0x02C) -/* PERIP1_CLK_ENB register masks */ -#define UART_CLK_ENB 3 -#define SSP_CLK_ENB 5 -#define I2C_CLK_ENB 7 -#define JPEG_CLK_ENB 8 -#define FIRDA_CLK_ENB 10 -#define GPT1_CLK_ENB 11 -#define GPT2_CLK_ENB 12 -#define ADC_CLK_ENB 15 -#define RTC_CLK_ENB 17 -#define GPIO_CLK_ENB 18 -#define DMA_CLK_ENB 19 -#define SMI_CLK_ENB 21 -#define GMAC_CLK_ENB 23 -#define USBD_CLK_ENB 24 -#define USBH_CLK_ENB 25 -#define C3_CLK_ENB 31 - -#define RAS_CLK_ENB (MISC_BASE + 0x034) - -#define PRSC1_CLK_CFG (MISC_BASE + 0x044) -#define PRSC2_CLK_CFG (MISC_BASE + 0x048) -#define PRSC3_CLK_CFG (MISC_BASE + 0x04C) -/* gpt synthesizer register masks */ -#define GPT_MSCALE_SHIFT 0 -#define GPT_MSCALE_MASK 0xFFF -#define GPT_NSCALE_SHIFT 12 -#define GPT_NSCALE_MASK 0xF - -#define AMEM_CLK_CFG (MISC_BASE + 0x050) -#define EXPI_CLK_CFG (MISC_BASE + 0x054) -#define CLCD_CLK_SYNT (MISC_BASE + 0x05C) -#define FIRDA_CLK_SYNT (MISC_BASE + 0x060) -#define UART_CLK_SYNT (MISC_BASE + 0x064) -#define GMAC_CLK_SYNT (MISC_BASE + 0x068) -#define RAS1_CLK_SYNT (MISC_BASE + 0x06C) -#define RAS2_CLK_SYNT (MISC_BASE + 0x070) -#define RAS3_CLK_SYNT (MISC_BASE + 0x074) -#define RAS4_CLK_SYNT (MISC_BASE + 0x078) -/* aux clk synthesiser register masks for irda to ras4 */ -#define AUX_SYNT_ENB 31 -#define AUX_EQ_SEL_SHIFT 30 -#define AUX_EQ_SEL_MASK 1 -#define AUX_EQ1_SEL 0 -#define AUX_EQ2_SEL 1 -#define AUX_XSCALE_SHIFT 16 -#define AUX_XSCALE_MASK 0xFFF -#define AUX_YSCALE_SHIFT 0 -#define AUX_YSCALE_MASK 0xFFF - -/* root clks */ -/* 32 KHz oscillator clock */ -static struct clk osc_32k_clk = { - .flags = ALWAYS_ENABLED, - .rate = 32000, -}; - -/* 24 MHz oscillator clock */ -static struct clk osc_24m_clk = { - .flags = ALWAYS_ENABLED, - .rate = 24000000, -}; - -/* clock derived from 32 KHz osc clk */ -/* rtc clock */ -static struct clk rtc_clk = { - .pclk = &osc_32k_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = RTC_CLK_ENB, - .recalc = &follow_parent, -}; - -/* clock derived from 24 MHz osc clk */ -/* pll masks structure */ -static struct pll_clk_masks pll1_masks = { - .mode_mask = PLL_MODE_MASK, - .mode_shift = PLL_MODE_SHIFT, - .norm_fdbk_m_mask = PLL_NORM_FDBK_M_MASK, - .norm_fdbk_m_shift = PLL_NORM_FDBK_M_SHIFT, - .dith_fdbk_m_mask = PLL_DITH_FDBK_M_MASK, - .dith_fdbk_m_shift = PLL_DITH_FDBK_M_SHIFT, - .div_p_mask = PLL_DIV_P_MASK, - .div_p_shift = PLL_DIV_P_SHIFT, - .div_n_mask = PLL_DIV_N_MASK, - .div_n_shift = PLL_DIV_N_SHIFT, -}; - -/* pll1 configuration structure */ -static struct pll_clk_config pll1_config = { - .mode_reg = PLL1_CTR, - .cfg_reg = PLL1_FRQ, - .masks = &pll1_masks, -}; - -/* pll rate configuration table, in ascending order of rates */ -struct pll_rate_tbl pll_rtbl[] = { - {.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */ - {.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */ -}; - -/* PLL1 clock */ -static struct clk pll1_clk = { - .flags = ENABLED_ON_INIT, - .pclk = &osc_24m_clk, - .en_reg = PLL1_CTR, - .en_reg_bit = PLL_ENABLE, - .calc_rate = &pll_calc_rate, - .recalc = &pll_clk_recalc, - .set_rate = &pll_clk_set_rate, - .rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1}, - .private_data = &pll1_config, -}; - -/* PLL3 48 MHz clock */ -static struct clk pll3_48m_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &osc_24m_clk, - .rate = 48000000, -}; - -/* watch dog timer clock */ -static struct clk wdt_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &osc_24m_clk, - .recalc = &follow_parent, -}; - -/* clock derived from pll1 clk */ -/* cpu clock */ -static struct clk cpu_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll1_clk, - .recalc = &follow_parent, -}; - -/* ahb masks structure */ -static struct bus_clk_masks ahb_masks = { - .mask = PLL_HCLK_RATIO_MASK, - .shift = PLL_HCLK_RATIO_SHIFT, -}; - -/* ahb configuration structure */ -static struct bus_clk_config ahb_config = { - .reg = CORE_CLK_CFG, - .masks = &ahb_masks, -}; - -/* ahb rate configuration table, in ascending order of rates */ -struct bus_rate_tbl bus_rtbl[] = { - {.div = 3}, /* == parent divided by 4 */ - {.div = 2}, /* == parent divided by 3 */ - {.div = 1}, /* == parent divided by 2 */ - {.div = 0}, /* == parent divided by 1 */ -}; - -/* ahb clock */ -static struct clk ahb_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll1_clk, - .calc_rate = &bus_calc_rate, - .recalc = &bus_clk_recalc, - .set_rate = &bus_clk_set_rate, - .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2}, - .private_data = &ahb_config, -}; - -/* auxiliary synthesizers masks */ -static struct aux_clk_masks aux_masks = { - .eq_sel_mask = AUX_EQ_SEL_MASK, - .eq_sel_shift = AUX_EQ_SEL_SHIFT, - .eq1_mask = AUX_EQ1_SEL, - .eq2_mask = AUX_EQ2_SEL, - .xscale_sel_mask = AUX_XSCALE_MASK, - .xscale_sel_shift = AUX_XSCALE_SHIFT, - .yscale_sel_mask = AUX_YSCALE_MASK, - .yscale_sel_shift = AUX_YSCALE_SHIFT, -}; - -/* uart synth configurations */ -static struct aux_clk_config uart_synth_config = { - .synth_reg = UART_CLK_SYNT, - .masks = &aux_masks, -}; - -/* aux rate configuration table, in ascending order of rates */ -struct aux_rate_tbl aux_rtbl[] = { - /* For PLL1 = 332 MHz */ - {.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */ - {.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */ - {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */ -}; - -/* uart synth clock */ -static struct clk uart_synth_clk = { - .en_reg = UART_CLK_SYNT, - .en_reg_bit = AUX_SYNT_ENB, - .pclk = &pll1_clk, - .calc_rate = &aux_calc_rate, - .recalc = &aux_clk_recalc, - .set_rate = &aux_clk_set_rate, - .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1}, - .private_data = &uart_synth_config, -}; - -/* uart parents */ -static struct pclk_info uart_pclk_info[] = { - { - .pclk = &uart_synth_clk, - .pclk_val = AUX_CLK_PLL1_VAL, - }, { - .pclk = &pll3_48m_clk, - .pclk_val = AUX_CLK_PLL3_VAL, - }, -}; - -/* uart parent select structure */ -static struct pclk_sel uart_pclk_sel = { - .pclk_info = uart_pclk_info, - .pclk_count = ARRAY_SIZE(uart_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = UART_CLK_MASK, -}; - -/* uart clock */ -static struct clk uart_clk = { - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = UART_CLK_ENB, - .pclk_sel = &uart_pclk_sel, - .pclk_sel_shift = UART_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* firda configurations */ -static struct aux_clk_config firda_synth_config = { - .synth_reg = FIRDA_CLK_SYNT, - .masks = &aux_masks, -}; - -/* firda synth clock */ -static struct clk firda_synth_clk = { - .en_reg = FIRDA_CLK_SYNT, - .en_reg_bit = AUX_SYNT_ENB, - .pclk = &pll1_clk, - .calc_rate = &aux_calc_rate, - .recalc = &aux_clk_recalc, - .set_rate = &aux_clk_set_rate, - .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1}, - .private_data = &firda_synth_config, -}; - -/* firda parents */ -static struct pclk_info firda_pclk_info[] = { - { - .pclk = &firda_synth_clk, - .pclk_val = AUX_CLK_PLL1_VAL, - }, { - .pclk = &pll3_48m_clk, - .pclk_val = AUX_CLK_PLL3_VAL, - }, -}; - -/* firda parent select structure */ -static struct pclk_sel firda_pclk_sel = { - .pclk_info = firda_pclk_info, - .pclk_count = ARRAY_SIZE(firda_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = FIRDA_CLK_MASK, -}; - -/* firda clock */ -static struct clk firda_clk = { - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = FIRDA_CLK_ENB, - .pclk_sel = &firda_pclk_sel, - .pclk_sel_shift = FIRDA_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* gpt synthesizer masks */ -static struct gpt_clk_masks gpt_masks = { - .mscale_sel_mask = GPT_MSCALE_MASK, - .mscale_sel_shift = GPT_MSCALE_SHIFT, - .nscale_sel_mask = GPT_NSCALE_MASK, - .nscale_sel_shift = GPT_NSCALE_SHIFT, -}; - -/* gpt rate configuration table, in ascending order of rates */ -struct gpt_rate_tbl gpt_rtbl[] = { - /* For pll1 = 332 MHz */ - {.mscale = 4, .nscale = 0}, /* 41.5 MHz */ - {.mscale = 2, .nscale = 0}, /* 55.3 MHz */ - {.mscale = 1, .nscale = 0}, /* 83 MHz */ -}; - -/* gpt0 synth clk config*/ -static struct gpt_clk_config gpt0_synth_config = { - .synth_reg = PRSC1_CLK_CFG, - .masks = &gpt_masks, -}; - -/* gpt synth clock */ -static struct clk gpt0_synth_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll1_clk, - .calc_rate = &gpt_calc_rate, - .recalc = &gpt_clk_recalc, - .set_rate = &gpt_clk_set_rate, - .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2}, - .private_data = &gpt0_synth_config, -}; - -/* gpt parents */ -static struct pclk_info gpt0_pclk_info[] = { - { - .pclk = &gpt0_synth_clk, - .pclk_val = AUX_CLK_PLL1_VAL, - }, { - .pclk = &pll3_48m_clk, - .pclk_val = AUX_CLK_PLL3_VAL, - }, -}; - -/* gpt parent select structure */ -static struct pclk_sel gpt0_pclk_sel = { - .pclk_info = gpt0_pclk_info, - .pclk_count = ARRAY_SIZE(gpt0_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = GPT_CLK_MASK, -}; - -/* gpt0 timer clock */ -static struct clk gpt0_clk = { - .flags = ALWAYS_ENABLED, - .pclk_sel = &gpt0_pclk_sel, - .pclk_sel_shift = GPT0_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* gpt1 synth clk configurations */ -static struct gpt_clk_config gpt1_synth_config = { - .synth_reg = PRSC2_CLK_CFG, - .masks = &gpt_masks, -}; - -/* gpt1 synth clock */ -static struct clk gpt1_synth_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll1_clk, - .calc_rate = &gpt_calc_rate, - .recalc = &gpt_clk_recalc, - .set_rate = &gpt_clk_set_rate, - .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2}, - .private_data = &gpt1_synth_config, -}; - -static struct pclk_info gpt1_pclk_info[] = { - { - .pclk = &gpt1_synth_clk, - .pclk_val = AUX_CLK_PLL1_VAL, - }, { - .pclk = &pll3_48m_clk, - .pclk_val = AUX_CLK_PLL3_VAL, - }, -}; - -/* gpt parent select structure */ -static struct pclk_sel gpt1_pclk_sel = { - .pclk_info = gpt1_pclk_info, - .pclk_count = ARRAY_SIZE(gpt1_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = GPT_CLK_MASK, -}; - -/* gpt1 timer clock */ -static struct clk gpt1_clk = { - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = GPT1_CLK_ENB, - .pclk_sel = &gpt1_pclk_sel, - .pclk_sel_shift = GPT1_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* gpt2 synth clk configurations */ -static struct gpt_clk_config gpt2_synth_config = { - .synth_reg = PRSC3_CLK_CFG, - .masks = &gpt_masks, -}; - -/* gpt1 synth clock */ -static struct clk gpt2_synth_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll1_clk, - .calc_rate = &gpt_calc_rate, - .recalc = &gpt_clk_recalc, - .set_rate = &gpt_clk_set_rate, - .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2}, - .private_data = &gpt2_synth_config, -}; - -static struct pclk_info gpt2_pclk_info[] = { - { - .pclk = &gpt2_synth_clk, - .pclk_val = AUX_CLK_PLL1_VAL, - }, { - .pclk = &pll3_48m_clk, - .pclk_val = AUX_CLK_PLL3_VAL, - }, -}; - -/* gpt parent select structure */ -static struct pclk_sel gpt2_pclk_sel = { - .pclk_info = gpt2_pclk_info, - .pclk_count = ARRAY_SIZE(gpt2_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = GPT_CLK_MASK, -}; - -/* gpt2 timer clock */ -static struct clk gpt2_clk = { - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = GPT2_CLK_ENB, - .pclk_sel = &gpt2_pclk_sel, - .pclk_sel_shift = GPT2_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* clock derived from pll3 clk */ -/* usbh clock */ -static struct clk usbh_clk = { - .pclk = &pll3_48m_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = USBH_CLK_ENB, - .recalc = &follow_parent, -}; - -/* usbd clock */ -static struct clk usbd_clk = { - .pclk = &pll3_48m_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = USBD_CLK_ENB, - .recalc = &follow_parent, -}; - -/* clock derived from usbh clk */ -/* usbh0 clock */ -static struct clk usbh0_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &usbh_clk, - .recalc = &follow_parent, -}; - -/* usbh1 clock */ -static struct clk usbh1_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &usbh_clk, - .recalc = &follow_parent, -}; - -/* clock derived from ahb clk */ -/* apb masks structure */ -static struct bus_clk_masks apb_masks = { - .mask = HCLK_PCLK_RATIO_MASK, - .shift = HCLK_PCLK_RATIO_SHIFT, -}; - -/* apb configuration structure */ -static struct bus_clk_config apb_config = { - .reg = CORE_CLK_CFG, - .masks = &apb_masks, -}; - -/* apb clock */ -static struct clk apb_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &ahb_clk, - .calc_rate = &bus_calc_rate, - .recalc = &bus_clk_recalc, - .set_rate = &bus_clk_set_rate, - .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2}, - .private_data = &apb_config, -}; - -/* i2c clock */ -static struct clk i2c_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = I2C_CLK_ENB, - .recalc = &follow_parent, -}; - -/* dma clock */ -static struct clk dma_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = DMA_CLK_ENB, - .recalc = &follow_parent, -}; - -/* jpeg clock */ -static struct clk jpeg_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = JPEG_CLK_ENB, - .recalc = &follow_parent, -}; - -/* gmac clock */ -static struct clk gmac_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = GMAC_CLK_ENB, - .recalc = &follow_parent, -}; - -/* smi clock */ -static struct clk smi_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = SMI_CLK_ENB, - .recalc = &follow_parent, -}; - -/* c3 clock */ -static struct clk c3_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = C3_CLK_ENB, - .recalc = &follow_parent, -}; - -/* clock derived from apb clk */ -/* adc clock */ -static struct clk adc_clk = { - .pclk = &apb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = ADC_CLK_ENB, - .recalc = &follow_parent, -}; - -#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320) -/* emi clock */ -static struct clk emi_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &ahb_clk, - .recalc = &follow_parent, -}; -#endif - -/* ssp clock */ -static struct clk ssp0_clk = { - .pclk = &apb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = SSP_CLK_ENB, - .recalc = &follow_parent, -}; - -/* gpio clock */ -static struct clk gpio_clk = { - .pclk = &apb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = GPIO_CLK_ENB, - .recalc = &follow_parent, -}; - -static struct clk dummy_apb_pclk; - -#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR310) || \ - defined(CONFIG_MACH_SPEAR320) -/* fsmc clock */ -static struct clk fsmc_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &ahb_clk, - .recalc = &follow_parent, -}; -#endif - -/* common clocks to spear310 and spear320 */ -#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320) -/* uart1 clock */ -static struct clk uart1_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; - -/* uart2 clock */ -static struct clk uart2_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; -#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */ - -/* common clocks to spear300 and spear320 */ -#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR320) -/* clcd clock */ -static struct clk clcd_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll3_48m_clk, - .recalc = &follow_parent, -}; - -/* sdhci clock */ -static struct clk sdhci_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &ahb_clk, - .recalc = &follow_parent, -}; -#endif /* CONFIG_MACH_SPEAR300 || CONFIG_MACH_SPEAR320 */ - -/* spear300 machine specific clock structures */ -#ifdef CONFIG_MACH_SPEAR300 -/* gpio1 clock */ -static struct clk gpio1_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; - -/* keyboard clock */ -static struct clk kbd_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; - -#endif - -/* spear310 machine specific clock structures */ -#ifdef CONFIG_MACH_SPEAR310 -/* uart3 clock */ -static struct clk uart3_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; - -/* uart4 clock */ -static struct clk uart4_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; - -/* uart5 clock */ -static struct clk uart5_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; -#endif - -/* spear320 machine specific clock structures */ -#ifdef CONFIG_MACH_SPEAR320 -/* can0 clock */ -static struct clk can0_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; - -/* can1 clock */ -static struct clk can1_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; - -/* i2c1 clock */ -static struct clk i2c1_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &ahb_clk, - .recalc = &follow_parent, -}; - -/* ssp1 clock */ -static struct clk ssp1_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; - -/* ssp2 clock */ -static struct clk ssp2_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; - -/* pwm clock */ -static struct clk pwm_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; -#endif - -/* array of all spear 3xx clock lookups */ -static struct clk_lookup spear_clk_lookups[] = { - CLKDEV_INIT(NULL, "apb_pclk", &dummy_apb_pclk), - /* root clks */ - CLKDEV_INIT(NULL, "osc_32k_clk", &osc_32k_clk), - CLKDEV_INIT(NULL, "osc_24m_clk", &osc_24m_clk), - /* clock derived from 32 KHz osc clk */ - CLKDEV_INIT("fc900000.rtc", NULL, &rtc_clk), - /* clock derived from 24 MHz osc clk */ - CLKDEV_INIT(NULL, "pll1_clk", &pll1_clk), - CLKDEV_INIT(NULL, "pll3_48m_clk", &pll3_48m_clk), - CLKDEV_INIT("fc880000.wdt", NULL, &wdt_clk), - /* clock derived from pll1 clk */ - CLKDEV_INIT(NULL, "cpu_clk", &cpu_clk), - CLKDEV_INIT(NULL, "ahb_clk", &ahb_clk), - CLKDEV_INIT(NULL, "uart_synth_clk", &uart_synth_clk), - CLKDEV_INIT(NULL, "firda_synth_clk", &firda_synth_clk), - CLKDEV_INIT(NULL, "gpt0_synth_clk", &gpt0_synth_clk), - CLKDEV_INIT(NULL, "gpt1_synth_clk", &gpt1_synth_clk), - CLKDEV_INIT(NULL, "gpt2_synth_clk", &gpt2_synth_clk), - CLKDEV_INIT("d0000000.serial", NULL, &uart_clk), - CLKDEV_INIT("firda", NULL, &firda_clk), - CLKDEV_INIT("gpt0", NULL, &gpt0_clk), - CLKDEV_INIT("gpt1", NULL, &gpt1_clk), - CLKDEV_INIT("gpt2", NULL, &gpt2_clk), - /* clock derived from pll3 clk */ - CLKDEV_INIT("designware_udc", NULL, &usbd_clk), - CLKDEV_INIT(NULL, "usbh_clk", &usbh_clk), - /* clock derived from usbh clk */ - CLKDEV_INIT(NULL, "usbh.0_clk", &usbh0_clk), - CLKDEV_INIT(NULL, "usbh.1_clk", &usbh1_clk), - /* clock derived from ahb clk */ - CLKDEV_INIT(NULL, "apb_clk", &apb_clk), - CLKDEV_INIT("d0180000.i2c", NULL, &i2c_clk), - CLKDEV_INIT("fc400000.dma", NULL, &dma_clk), - CLKDEV_INIT("jpeg", NULL, &jpeg_clk), - CLKDEV_INIT("e0800000.eth", NULL, &gmac_clk), - CLKDEV_INIT("fc000000.flash", NULL, &smi_clk), - CLKDEV_INIT("c3", NULL, &c3_clk), - /* clock derived from apb clk */ - CLKDEV_INIT("adc", NULL, &adc_clk), - CLKDEV_INIT("d0100000.spi", NULL, &ssp0_clk), - CLKDEV_INIT("fc980000.gpio", NULL, &gpio_clk), -}; - -/* array of all spear 300 clock lookups */ -#ifdef CONFIG_MACH_SPEAR300 -static struct clk_lookup spear300_clk_lookups[] = { - CLKDEV_INIT("60000000.clcd", NULL, &clcd_clk), - CLKDEV_INIT("94000000.flash", NULL, &fsmc_clk), - CLKDEV_INIT("a9000000.gpio", NULL, &gpio1_clk), - CLKDEV_INIT("a0000000.kbd", NULL, &kbd_clk), - CLKDEV_INIT("70000000.sdhci", NULL, &sdhci_clk), -}; - -void __init spear300_clk_init(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++) - clk_register(&spear_clk_lookups[i]); - - for (i = 0; i < ARRAY_SIZE(spear300_clk_lookups); i++) - clk_register(&spear300_clk_lookups[i]); - - clk_init(); -} -#endif - -/* array of all spear 310 clock lookups */ -#ifdef CONFIG_MACH_SPEAR310 -static struct clk_lookup spear310_clk_lookups[] = { - CLKDEV_INIT("44000000.flash", NULL, &fsmc_clk), - CLKDEV_INIT(NULL, "emi", &emi_clk), - CLKDEV_INIT("b2000000.serial", NULL, &uart1_clk), - CLKDEV_INIT("b2080000.serial", NULL, &uart2_clk), - CLKDEV_INIT("b2100000.serial", NULL, &uart3_clk), - CLKDEV_INIT("b2180000.serial", NULL, &uart4_clk), - CLKDEV_INIT("b2200000.serial", NULL, &uart5_clk), -}; - -void __init spear310_clk_init(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++) - clk_register(&spear_clk_lookups[i]); - - for (i = 0; i < ARRAY_SIZE(spear310_clk_lookups); i++) - clk_register(&spear310_clk_lookups[i]); - - clk_init(); -} -#endif - -/* array of all spear 320 clock lookups */ -#ifdef CONFIG_MACH_SPEAR320 -static struct clk_lookup spear320_clk_lookups[] = { - CLKDEV_INIT("90000000.clcd", NULL, &clcd_clk), - CLKDEV_INIT("4c000000.flash", NULL, &fsmc_clk), - CLKDEV_INIT("a7000000.i2c", NULL, &i2c1_clk), - CLKDEV_INIT(NULL, "emi", &emi_clk), - CLKDEV_INIT("pwm", NULL, &pwm_clk), - CLKDEV_INIT("70000000.sdhci", NULL, &sdhci_clk), - CLKDEV_INIT("c_can_platform.0", NULL, &can0_clk), - CLKDEV_INIT("c_can_platform.1", NULL, &can1_clk), - CLKDEV_INIT("a5000000.spi", NULL, &ssp1_clk), - CLKDEV_INIT("a6000000.spi", NULL, &ssp2_clk), - CLKDEV_INIT("a3000000.serial", NULL, &uart1_clk), - CLKDEV_INIT("a4000000.serial", NULL, &uart2_clk), -}; - -void __init spear320_clk_init(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++) - clk_register(&spear_clk_lookups[i]); - - for (i = 0; i < ARRAY_SIZE(spear320_clk_lookups); i++) - clk_register(&spear320_clk_lookups[i]); - - clk_init(); -} -#endif diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h index efb69357429a..4a95b9453c2a 100644 --- a/arch/arm/mach-spear3xx/include/mach/generic.h +++ b/arch/arm/mach-spear3xx/include/mach/generic.h @@ -20,7 +20,6 @@ #include <linux/amba/bus.h> #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <plat/padmux.h> /* Add spear3xx family device structure declarations here */ extern struct sys_timer spear3xx_timer; @@ -29,154 +28,10 @@ extern struct pl08x_platform_data pl080_plat_data; /* Add spear3xx family function declarations here */ void __init spear_setup_of_timer(void); +void __init spear3xx_clk_init(void); void __init spear3xx_map_io(void); void __init spear3xx_dt_init_irq(void); void spear_restart(char, const char *); -/* pad mux declarations */ -#define PMX_FIRDA_MASK (1 << 14) -#define PMX_I2C_MASK (1 << 13) -#define PMX_SSP_CS_MASK (1 << 12) -#define PMX_SSP_MASK (1 << 11) -#define PMX_MII_MASK (1 << 10) -#define PMX_GPIO_PIN0_MASK (1 << 9) -#define PMX_GPIO_PIN1_MASK (1 << 8) -#define PMX_GPIO_PIN2_MASK (1 << 7) -#define PMX_GPIO_PIN3_MASK (1 << 6) -#define PMX_GPIO_PIN4_MASK (1 << 5) -#define PMX_GPIO_PIN5_MASK (1 << 4) -#define PMX_UART0_MODEM_MASK (1 << 3) -#define PMX_UART0_MASK (1 << 2) -#define PMX_TIMER_3_4_MASK (1 << 1) -#define PMX_TIMER_1_2_MASK (1 << 0) - -/* pad mux devices */ -extern struct pmx_dev spear3xx_pmx_firda; -extern struct pmx_dev spear3xx_pmx_i2c; -extern struct pmx_dev spear3xx_pmx_ssp_cs; -extern struct pmx_dev spear3xx_pmx_ssp; -extern struct pmx_dev spear3xx_pmx_mii; -extern struct pmx_dev spear3xx_pmx_gpio_pin0; -extern struct pmx_dev spear3xx_pmx_gpio_pin1; -extern struct pmx_dev spear3xx_pmx_gpio_pin2; -extern struct pmx_dev spear3xx_pmx_gpio_pin3; -extern struct pmx_dev spear3xx_pmx_gpio_pin4; -extern struct pmx_dev spear3xx_pmx_gpio_pin5; -extern struct pmx_dev spear3xx_pmx_uart0_modem; -extern struct pmx_dev spear3xx_pmx_uart0; -extern struct pmx_dev spear3xx_pmx_timer_3_4; -extern struct pmx_dev spear3xx_pmx_timer_1_2; - -#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320) -/* padmux plgpio devices */ -extern struct pmx_dev spear3xx_pmx_plgpio_0_1; -extern struct pmx_dev spear3xx_pmx_plgpio_2_3; -extern struct pmx_dev spear3xx_pmx_plgpio_4_5; -extern struct pmx_dev spear3xx_pmx_plgpio_6_9; -extern struct pmx_dev spear3xx_pmx_plgpio_10_27; -extern struct pmx_dev spear3xx_pmx_plgpio_28; -extern struct pmx_dev spear3xx_pmx_plgpio_29; -extern struct pmx_dev spear3xx_pmx_plgpio_30; -extern struct pmx_dev spear3xx_pmx_plgpio_31; -extern struct pmx_dev spear3xx_pmx_plgpio_32; -extern struct pmx_dev spear3xx_pmx_plgpio_33; -extern struct pmx_dev spear3xx_pmx_plgpio_34_36; -extern struct pmx_dev spear3xx_pmx_plgpio_37_42; -extern struct pmx_dev spear3xx_pmx_plgpio_43_44_47_48; -extern struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50; -#endif - -/* spear300 declarations */ -#ifdef CONFIG_MACH_SPEAR300 -/* pad mux modes */ -extern struct pmx_mode spear300_nand_mode; -extern struct pmx_mode spear300_nor_mode; -extern struct pmx_mode spear300_photo_frame_mode; -extern struct pmx_mode spear300_lend_ip_phone_mode; -extern struct pmx_mode spear300_hend_ip_phone_mode; -extern struct pmx_mode spear300_lend_wifi_phone_mode; -extern struct pmx_mode spear300_hend_wifi_phone_mode; -extern struct pmx_mode spear300_ata_pabx_wi2s_mode; -extern struct pmx_mode spear300_ata_pabx_i2s_mode; -extern struct pmx_mode spear300_caml_lcdw_mode; -extern struct pmx_mode spear300_camu_lcd_mode; -extern struct pmx_mode spear300_camu_wlcd_mode; -extern struct pmx_mode spear300_caml_lcd_mode; - -/* pad mux devices */ -extern struct pmx_dev spear300_pmx_fsmc_2_chips; -extern struct pmx_dev spear300_pmx_fsmc_4_chips; -extern struct pmx_dev spear300_pmx_keyboard; -extern struct pmx_dev spear300_pmx_clcd; -extern struct pmx_dev spear300_pmx_telecom_gpio; -extern struct pmx_dev spear300_pmx_telecom_tdm; -extern struct pmx_dev spear300_pmx_telecom_spi_cs_i2c_clk; -extern struct pmx_dev spear300_pmx_telecom_camera; -extern struct pmx_dev spear300_pmx_telecom_dac; -extern struct pmx_dev spear300_pmx_telecom_i2s; -extern struct pmx_dev spear300_pmx_telecom_boot_pins; -extern struct pmx_dev spear300_pmx_telecom_sdhci_4bit; -extern struct pmx_dev spear300_pmx_telecom_sdhci_8bit; -extern struct pmx_dev spear300_pmx_gpio1; - -/* Add spear300 machine declarations here */ -void __init spear300_clk_init(void); - -#endif /* CONFIG_MACH_SPEAR300 */ - -/* spear310 declarations */ -#ifdef CONFIG_MACH_SPEAR310 -/* pad mux devices */ -extern struct pmx_dev spear310_pmx_emi_cs_0_1_4_5; -extern struct pmx_dev spear310_pmx_emi_cs_2_3; -extern struct pmx_dev spear310_pmx_uart1; -extern struct pmx_dev spear310_pmx_uart2; -extern struct pmx_dev spear310_pmx_uart3_4_5; -extern struct pmx_dev spear310_pmx_fsmc; -extern struct pmx_dev spear310_pmx_rs485_0_1; -extern struct pmx_dev spear310_pmx_tdm0; - -/* Add spear310 machine declarations here */ -void __init spear310_clk_init(void); - -#endif /* CONFIG_MACH_SPEAR310 */ - -/* spear320 declarations */ -#ifdef CONFIG_MACH_SPEAR320 -/* pad mux modes */ -extern struct pmx_mode spear320_auto_net_smii_mode; -extern struct pmx_mode spear320_auto_net_mii_mode; -extern struct pmx_mode spear320_auto_exp_mode; -extern struct pmx_mode spear320_small_printers_mode; - -/* pad mux devices */ -extern struct pmx_dev spear320_pmx_clcd; -extern struct pmx_dev spear320_pmx_emi; -extern struct pmx_dev spear320_pmx_fsmc; -extern struct pmx_dev spear320_pmx_spp; -extern struct pmx_dev spear320_pmx_sdhci; -extern struct pmx_dev spear320_pmx_i2s; -extern struct pmx_dev spear320_pmx_uart1; -extern struct pmx_dev spear320_pmx_uart1_modem; -extern struct pmx_dev spear320_pmx_uart2; -extern struct pmx_dev spear320_pmx_touchscreen; -extern struct pmx_dev spear320_pmx_can; -extern struct pmx_dev spear320_pmx_sdhci_led; -extern struct pmx_dev spear320_pmx_pwm0; -extern struct pmx_dev spear320_pmx_pwm1; -extern struct pmx_dev spear320_pmx_pwm2; -extern struct pmx_dev spear320_pmx_pwm3; -extern struct pmx_dev spear320_pmx_ssp1; -extern struct pmx_dev spear320_pmx_ssp2; -extern struct pmx_dev spear320_pmx_mii1; -extern struct pmx_dev spear320_pmx_smii0; -extern struct pmx_dev spear320_pmx_smii1; -extern struct pmx_dev spear320_pmx_i2c1; - -/* Add spear320 machine declarations here */ -void __init spear320_clk_init(void); - -#endif /* CONFIG_MACH_SPEAR320 */ - #endif /* __MACH_GENERIC_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear3xx/include/mach/misc_regs.h index e0ab72e61507..18e2ac576f25 100644 --- a/arch/arm/mach-spear3xx/include/mach/misc_regs.h +++ b/arch/arm/mach-spear3xx/include/mach/misc_regs.h @@ -14,6 +14,8 @@ #ifndef __MACH_MISC_REGS_H #define __MACH_MISC_REGS_H +#include <mach/spear.h> + #define MISC_BASE IOMEM(VA_SPEAR3XX_ICM3_MISC_REG_BASE) #define DMA_CHN_CFG (MISC_BASE + 0x0A0) diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h index 04da906b0d4c..51eb953148a9 100644 --- a/arch/arm/mach-spear3xx/include/mach/spear.h +++ b/arch/arm/mach-spear3xx/include/mach/spear.h @@ -44,4 +44,17 @@ #define SPEAR_SYS_CTRL_BASE SPEAR3XX_ICM3_SYS_CTRL_BASE #define VA_SPEAR_SYS_CTRL_BASE VA_SPEAR3XX_ICM3_SYS_CTRL_BASE +/* SPEAr320 Macros */ +#define SPEAR320_SOC_CONFIG_BASE UL(0xB3000000) +#define VA_SPEAR320_SOC_CONFIG_BASE UL(0xFE000000) +#define SPEAR320_CONTROL_REG IOMEM(VA_SPEAR320_SOC_CONFIG_BASE) +#define SPEAR320_EXT_CTRL_REG IOMEM(VA_SPEAR320_SOC_CONFIG_BASE + 0x0018) + #define SPEAR320_UARTX_PCLK_MASK 0x1 + #define SPEAR320_UART2_PCLK_SHIFT 8 + #define SPEAR320_UART3_PCLK_SHIFT 9 + #define SPEAR320_UART4_PCLK_SHIFT 10 + #define SPEAR320_UART5_PCLK_SHIFT 11 + #define SPEAR320_UART6_PCLK_SHIFT 12 + #define SPEAR320_RS485_PCLK_SHIFT 13 + #endif /* __MACH_SPEAR3XX_H */ diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c index febcdd8d4e92..f74a05bdb829 100644 --- a/arch/arm/mach-spear3xx/spear300.c +++ b/arch/arm/mach-spear3xx/spear300.c @@ -60,357 +60,6 @@ /* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ #define SPEAR300_IRQ_SDHCI SPEAR3XX_IRQ_INTRCOMM_RAS_ARM -/* pad multiplexing support */ -/* muxing registers */ -#define PAD_MUX_CONFIG_REG 0x00 -#define MODE_CONFIG_REG 0x04 - -/* modes */ -#define NAND_MODE (1 << 0) -#define NOR_MODE (1 << 1) -#define PHOTO_FRAME_MODE (1 << 2) -#define LEND_IP_PHONE_MODE (1 << 3) -#define HEND_IP_PHONE_MODE (1 << 4) -#define LEND_WIFI_PHONE_MODE (1 << 5) -#define HEND_WIFI_PHONE_MODE (1 << 6) -#define ATA_PABX_WI2S_MODE (1 << 7) -#define ATA_PABX_I2S_MODE (1 << 8) -#define CAML_LCDW_MODE (1 << 9) -#define CAMU_LCD_MODE (1 << 10) -#define CAMU_WLCD_MODE (1 << 11) -#define CAML_LCD_MODE (1 << 12) -#define ALL_MODES 0x1FFF - -struct pmx_mode spear300_nand_mode = { - .id = NAND_MODE, - .name = "nand mode", - .mask = 0x00, -}; - -struct pmx_mode spear300_nor_mode = { - .id = NOR_MODE, - .name = "nor mode", - .mask = 0x01, -}; - -struct pmx_mode spear300_photo_frame_mode = { - .id = PHOTO_FRAME_MODE, - .name = "photo frame mode", - .mask = 0x02, -}; - -struct pmx_mode spear300_lend_ip_phone_mode = { - .id = LEND_IP_PHONE_MODE, - .name = "lend ip phone mode", - .mask = 0x03, -}; - -struct pmx_mode spear300_hend_ip_phone_mode = { - .id = HEND_IP_PHONE_MODE, - .name = "hend ip phone mode", - .mask = 0x04, -}; - -struct pmx_mode spear300_lend_wifi_phone_mode = { - .id = LEND_WIFI_PHONE_MODE, - .name = "lend wifi phone mode", - .mask = 0x05, -}; - -struct pmx_mode spear300_hend_wifi_phone_mode = { - .id = HEND_WIFI_PHONE_MODE, - .name = "hend wifi phone mode", - .mask = 0x06, -}; - -struct pmx_mode spear300_ata_pabx_wi2s_mode = { - .id = ATA_PABX_WI2S_MODE, - .name = "ata pabx wi2s mode", - .mask = 0x07, -}; - -struct pmx_mode spear300_ata_pabx_i2s_mode = { - .id = ATA_PABX_I2S_MODE, - .name = "ata pabx i2s mode", - .mask = 0x08, -}; - -struct pmx_mode spear300_caml_lcdw_mode = { - .id = CAML_LCDW_MODE, - .name = "caml lcdw mode", - .mask = 0x0C, -}; - -struct pmx_mode spear300_camu_lcd_mode = { - .id = CAMU_LCD_MODE, - .name = "camu lcd mode", - .mask = 0x0D, -}; - -struct pmx_mode spear300_camu_wlcd_mode = { - .id = CAMU_WLCD_MODE, - .name = "camu wlcd mode", - .mask = 0x0E, -}; - -struct pmx_mode spear300_caml_lcd_mode = { - .id = CAML_LCD_MODE, - .name = "caml lcd mode", - .mask = 0x0F, -}; - -/* devices */ -static struct pmx_dev_mode pmx_fsmc_2_chips_modes[] = { - { - .ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE | - ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE, - .mask = PMX_FIRDA_MASK, - }, -}; - -struct pmx_dev spear300_pmx_fsmc_2_chips = { - .name = "fsmc_2_chips", - .modes = pmx_fsmc_2_chips_modes, - .mode_count = ARRAY_SIZE(pmx_fsmc_2_chips_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_fsmc_4_chips_modes[] = { - { - .ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE | - ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE, - .mask = PMX_FIRDA_MASK | PMX_UART0_MASK, - }, -}; - -struct pmx_dev spear300_pmx_fsmc_4_chips = { - .name = "fsmc_4_chips", - .modes = pmx_fsmc_4_chips_modes, - .mode_count = ARRAY_SIZE(pmx_fsmc_4_chips_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_keyboard_modes[] = { - { - .ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE | - LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE | - CAML_LCDW_MODE | CAMU_LCD_MODE | CAMU_WLCD_MODE | - CAML_LCD_MODE, - .mask = 0x0, - }, -}; - -struct pmx_dev spear300_pmx_keyboard = { - .name = "keyboard", - .modes = pmx_keyboard_modes, - .mode_count = ARRAY_SIZE(pmx_keyboard_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_clcd_modes[] = { - { - .ids = PHOTO_FRAME_MODE, - .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK , - }, { - .ids = HEND_IP_PHONE_MODE | HEND_WIFI_PHONE_MODE | - CAMU_LCD_MODE | CAML_LCD_MODE, - .mask = PMX_TIMER_3_4_MASK, - }, -}; - -struct pmx_dev spear300_pmx_clcd = { - .name = "clcd", - .modes = pmx_clcd_modes, - .mode_count = ARRAY_SIZE(pmx_clcd_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_telecom_gpio_modes[] = { - { - .ids = PHOTO_FRAME_MODE | CAMU_LCD_MODE | CAML_LCD_MODE, - .mask = PMX_MII_MASK, - }, { - .ids = LEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE, - .mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK, - }, { - .ids = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_WLCD_MODE, - .mask = PMX_MII_MASK | PMX_TIMER_3_4_MASK, - }, { - .ids = HEND_IP_PHONE_MODE | HEND_WIFI_PHONE_MODE, - .mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK, - }, { - .ids = ATA_PABX_WI2S_MODE, - .mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK - | PMX_UART0_MODEM_MASK, - }, -}; - -struct pmx_dev spear300_pmx_telecom_gpio = { - .name = "telecom_gpio", - .modes = pmx_telecom_gpio_modes, - .mode_count = ARRAY_SIZE(pmx_telecom_gpio_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_telecom_tdm_modes[] = { - { - .ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE | - HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE - | HEND_WIFI_PHONE_MODE | ATA_PABX_WI2S_MODE - | ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE - | CAMU_WLCD_MODE | CAML_LCD_MODE, - .mask = PMX_UART0_MODEM_MASK | PMX_SSP_CS_MASK, - }, -}; - -struct pmx_dev spear300_pmx_telecom_tdm = { - .name = "telecom_tdm", - .modes = pmx_telecom_tdm_modes, - .mode_count = ARRAY_SIZE(pmx_telecom_tdm_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_telecom_spi_cs_i2c_clk_modes[] = { - { - .ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE | - LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE - | ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE | - CAML_LCDW_MODE | CAML_LCD_MODE, - .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK, - }, -}; - -struct pmx_dev spear300_pmx_telecom_spi_cs_i2c_clk = { - .name = "telecom_spi_cs_i2c_clk", - .modes = pmx_telecom_spi_cs_i2c_clk_modes, - .mode_count = ARRAY_SIZE(pmx_telecom_spi_cs_i2c_clk_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_telecom_camera_modes[] = { - { - .ids = CAML_LCDW_MODE | CAML_LCD_MODE, - .mask = PMX_MII_MASK, - }, { - .ids = CAMU_LCD_MODE | CAMU_WLCD_MODE, - .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK | PMX_MII_MASK, - }, -}; - -struct pmx_dev spear300_pmx_telecom_camera = { - .name = "telecom_camera", - .modes = pmx_telecom_camera_modes, - .mode_count = ARRAY_SIZE(pmx_telecom_camera_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_telecom_dac_modes[] = { - { - .ids = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE - | CAMU_WLCD_MODE | CAML_LCD_MODE, - .mask = PMX_TIMER_1_2_MASK, - }, -}; - -struct pmx_dev spear300_pmx_telecom_dac = { - .name = "telecom_dac", - .modes = pmx_telecom_dac_modes, - .mode_count = ARRAY_SIZE(pmx_telecom_dac_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_telecom_i2s_modes[] = { - { - .ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE - | LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE | - ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE - | CAMU_WLCD_MODE | CAML_LCD_MODE, - .mask = PMX_UART0_MODEM_MASK, - }, -}; - -struct pmx_dev spear300_pmx_telecom_i2s = { - .name = "telecom_i2s", - .modes = pmx_telecom_i2s_modes, - .mode_count = ARRAY_SIZE(pmx_telecom_i2s_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_telecom_boot_pins_modes[] = { - { - .ids = NAND_MODE | NOR_MODE, - .mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK | - PMX_TIMER_3_4_MASK, - }, -}; - -struct pmx_dev spear300_pmx_telecom_boot_pins = { - .name = "telecom_boot_pins", - .modes = pmx_telecom_boot_pins_modes, - .mode_count = ARRAY_SIZE(pmx_telecom_boot_pins_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_telecom_sdhci_4bit_modes[] = { - { - .ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE | - HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE | - HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE | - CAMU_WLCD_MODE | CAML_LCD_MODE | ATA_PABX_WI2S_MODE | - ATA_PABX_I2S_MODE, - .mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK | - PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK | - PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK, - }, -}; - -struct pmx_dev spear300_pmx_telecom_sdhci_4bit = { - .name = "telecom_sdhci_4bit", - .modes = pmx_telecom_sdhci_4bit_modes, - .mode_count = ARRAY_SIZE(pmx_telecom_sdhci_4bit_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_telecom_sdhci_8bit_modes[] = { - { - .ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE | - HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE | - HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE | - CAMU_WLCD_MODE | CAML_LCD_MODE, - .mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK | - PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK | - PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK | PMX_MII_MASK, - }, -}; - -struct pmx_dev spear300_pmx_telecom_sdhci_8bit = { - .name = "telecom_sdhci_8bit", - .modes = pmx_telecom_sdhci_8bit_modes, - .mode_count = ARRAY_SIZE(pmx_telecom_sdhci_8bit_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_gpio1_modes[] = { - { - .ids = PHOTO_FRAME_MODE, - .mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK | - PMX_TIMER_3_4_MASK, - }, -}; - -struct pmx_dev spear300_pmx_gpio1 = { - .name = "arm gpio1", - .modes = pmx_gpio1_modes, - .mode_count = ARRAY_SIZE(pmx_gpio1_modes), - .enb_on_reset = 1, -}; - -/* pmx driver structure */ -static struct pmx_driver pmx_driver = { - .mode_reg = {.offset = MODE_CONFIG_REG, .mask = 0x0000000f}, - .mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff}, -}; - /* spear3xx shared irq */ static struct shirq_dev_config shirq_ras1_config[] = { { @@ -464,22 +113,6 @@ static struct spear_shirq shirq_ras1 = { }, }; -/* padmux devices to enable */ -static struct pmx_dev *spear300_evb_pmx_devs[] = { - /* spear3xx specific devices */ - &spear3xx_pmx_i2c, - &spear3xx_pmx_ssp_cs, - &spear3xx_pmx_ssp, - &spear3xx_pmx_mii, - &spear3xx_pmx_uart0, - - /* spear300 specific devices */ - &spear300_pmx_fsmc_2_chips, - &spear300_pmx_clcd, - &spear300_pmx_telecom_sdhci_4bit, - &spear300_pmx_gpio1, -}; - /* DMAC platform data's slave info */ struct pl08x_channel_data spear300_dma_info[] = { { @@ -678,7 +311,7 @@ static struct of_dev_auxdata spear300_auxdata_lookup[] __initdata = { static void __init spear300_dt_init(void) { - int ret = -EINVAL; + int ret; pl080_plat_data.slave_channels = spear300_dma_info; pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear300_dma_info); @@ -693,26 +326,6 @@ static void __init spear300_dt_init(void) if (ret) pr_err("Error registering Shared IRQ\n"); } - - if (of_machine_is_compatible("st,spear300-evb")) { - /* pmx initialization */ - pmx_driver.mode = &spear300_photo_frame_mode; - pmx_driver.devs = spear300_evb_pmx_devs; - pmx_driver.devs_count = ARRAY_SIZE(spear300_evb_pmx_devs); - - pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K); - if (pmx_driver.base) { - ret = pmx_register(&pmx_driver); - if (ret) - pr_err("padmux: registration failed. err no: %d\n", - ret); - /* Free Mapping, device selection already done */ - iounmap(pmx_driver.base); - } - - if (ret) - pr_err("Initialization Failed"); - } } static const char * const spear300_dt_board_compat[] = { @@ -724,7 +337,6 @@ static const char * const spear300_dt_board_compat[] = { static void __init spear300_map_io(void) { spear3xx_map_io(); - spear300_clk_init(); } DT_MACHINE_START(SPEAR300_DT, "ST SPEAr300 SoC with Flattened Device Tree") diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c index b26e41566b50..84dfb0900747 100644 --- a/arch/arm/mach-spear3xx/spear310.c +++ b/arch/arm/mach-spear3xx/spear310.c @@ -82,128 +82,6 @@ #define SPEAR310_VIRQ_RS485_1 (SPEAR3XX_VIRQ_START + 17) -/* pad multiplexing support */ -/* muxing registers */ -#define PAD_MUX_CONFIG_REG 0x08 - -/* devices */ -static struct pmx_dev_mode pmx_emi_cs_0_1_4_5_modes[] = { - { - .ids = 0x00, - .mask = PMX_TIMER_3_4_MASK, - }, -}; - -struct pmx_dev spear310_pmx_emi_cs_0_1_4_5 = { - .name = "emi_cs_0_1_4_5", - .modes = pmx_emi_cs_0_1_4_5_modes, - .mode_count = ARRAY_SIZE(pmx_emi_cs_0_1_4_5_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_emi_cs_2_3_modes[] = { - { - .ids = 0x00, - .mask = PMX_TIMER_1_2_MASK, - }, -}; - -struct pmx_dev spear310_pmx_emi_cs_2_3 = { - .name = "emi_cs_2_3", - .modes = pmx_emi_cs_2_3_modes, - .mode_count = ARRAY_SIZE(pmx_emi_cs_2_3_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_uart1_modes[] = { - { - .ids = 0x00, - .mask = PMX_FIRDA_MASK, - }, -}; - -struct pmx_dev spear310_pmx_uart1 = { - .name = "uart1", - .modes = pmx_uart1_modes, - .mode_count = ARRAY_SIZE(pmx_uart1_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_uart2_modes[] = { - { - .ids = 0x00, - .mask = PMX_TIMER_1_2_MASK, - }, -}; - -struct pmx_dev spear310_pmx_uart2 = { - .name = "uart2", - .modes = pmx_uart2_modes, - .mode_count = ARRAY_SIZE(pmx_uart2_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_uart3_4_5_modes[] = { - { - .ids = 0x00, - .mask = PMX_UART0_MODEM_MASK, - }, -}; - -struct pmx_dev spear310_pmx_uart3_4_5 = { - .name = "uart3_4_5", - .modes = pmx_uart3_4_5_modes, - .mode_count = ARRAY_SIZE(pmx_uart3_4_5_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_fsmc_modes[] = { - { - .ids = 0x00, - .mask = PMX_SSP_CS_MASK, - }, -}; - -struct pmx_dev spear310_pmx_fsmc = { - .name = "fsmc", - .modes = pmx_fsmc_modes, - .mode_count = ARRAY_SIZE(pmx_fsmc_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_rs485_0_1_modes[] = { - { - .ids = 0x00, - .mask = PMX_MII_MASK, - }, -}; - -struct pmx_dev spear310_pmx_rs485_0_1 = { - .name = "rs485_0_1", - .modes = pmx_rs485_0_1_modes, - .mode_count = ARRAY_SIZE(pmx_rs485_0_1_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_tdm0_modes[] = { - { - .ids = 0x00, - .mask = PMX_MII_MASK, - }, -}; - -struct pmx_dev spear310_pmx_tdm0 = { - .name = "tdm0", - .modes = pmx_tdm0_modes, - .mode_count = ARRAY_SIZE(pmx_tdm0_modes), - .enb_on_reset = 1, -}; - -/* pmx driver structure */ -static struct pmx_driver pmx_driver = { - .mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff}, -}; - /* spear3xx shared irq */ static struct shirq_dev_config shirq_ras1_config[] = { { @@ -320,30 +198,6 @@ static struct spear_shirq shirq_intrcomm_ras = { }, }; -/* padmux devices to enable */ -static struct pmx_dev *spear310_evb_pmx_devs[] = { - /* spear3xx specific devices */ - &spear3xx_pmx_i2c, - &spear3xx_pmx_ssp, - &spear3xx_pmx_gpio_pin0, - &spear3xx_pmx_gpio_pin1, - &spear3xx_pmx_gpio_pin2, - &spear3xx_pmx_gpio_pin3, - &spear3xx_pmx_gpio_pin4, - &spear3xx_pmx_gpio_pin5, - &spear3xx_pmx_uart0, - - /* spear310 specific devices */ - &spear310_pmx_emi_cs_0_1_4_5, - &spear310_pmx_emi_cs_2_3, - &spear310_pmx_uart1, - &spear310_pmx_uart2, - &spear310_pmx_uart3_4_5, - &spear310_pmx_fsmc, - &spear310_pmx_rs485_0_1, - &spear310_pmx_tdm0, -}; - /* DMAC platform data's slave info */ struct pl08x_channel_data spear310_dma_info[] = { { @@ -578,7 +432,7 @@ static struct of_dev_auxdata spear310_auxdata_lookup[] __initdata = { static void __init spear310_dt_init(void) { void __iomem *base; - int ret = 0; + int ret; pl080_plat_data.slave_channels = spear310_dma_info; pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear310_dma_info); @@ -613,19 +467,6 @@ static void __init spear310_dt_init(void) if (ret) pr_err("Error registering Shared IRQ 4\n"); } - - if (of_machine_is_compatible("st,spear310-evb")) { - /* pmx initialization */ - pmx_driver.base = base; - pmx_driver.mode = NULL; - pmx_driver.devs = spear310_evb_pmx_devs; - pmx_driver.devs_count = ARRAY_SIZE(spear310_evb_pmx_devs); - - ret = pmx_register(&pmx_driver); - if (ret) - pr_err("padmux: registration failed. err no: %d\n", - ret); - } } static const char * const spear310_dt_board_compat[] = { @@ -637,7 +478,6 @@ static const char * const spear310_dt_board_compat[] = { static void __init spear310_map_io(void) { spear3xx_map_io(); - spear310_clk_init(); } DT_MACHINE_START(SPEAR310_DT, "ST SPEAr310 SoC with Flattened Device Tree") diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c index 2f5979b0c169..a88fa841d29d 100644 --- a/arch/arm/mach-spear3xx/spear320.c +++ b/arch/arm/mach-spear3xx/spear320.c @@ -27,7 +27,6 @@ #define SPEAR320_UART2_BASE UL(0xA4000000) #define SPEAR320_SSP0_BASE UL(0xA5000000) #define SPEAR320_SSP1_BASE UL(0xA6000000) -#define SPEAR320_SOC_CONFIG_BASE UL(0xB3000000) /* Interrupt registers offsets and masks */ #define SPEAR320_INT_STS_MASK_REG 0x04 @@ -83,373 +82,6 @@ #define SPEAR320_VIRQ_WAKEUP_MII1_SMII1 (SPEAR3XX_VIRQ_START + 15) #define SPEAR320_VIRQ_I2C1 (SPEAR3XX_VIRQ_START + 16) -/* pad multiplexing support */ -/* muxing registers */ -#define PAD_MUX_CONFIG_REG 0x0C -#define MODE_CONFIG_REG 0x10 - -/* modes */ -#define AUTO_NET_SMII_MODE (1 << 0) -#define AUTO_NET_MII_MODE (1 << 1) -#define AUTO_EXP_MODE (1 << 2) -#define SMALL_PRINTERS_MODE (1 << 3) -#define ALL_MODES 0xF - -struct pmx_mode spear320_auto_net_smii_mode = { - .id = AUTO_NET_SMII_MODE, - .name = "Automation Networking SMII Mode", - .mask = 0x00, -}; - -struct pmx_mode spear320_auto_net_mii_mode = { - .id = AUTO_NET_MII_MODE, - .name = "Automation Networking MII Mode", - .mask = 0x01, -}; - -struct pmx_mode spear320_auto_exp_mode = { - .id = AUTO_EXP_MODE, - .name = "Automation Expanded Mode", - .mask = 0x02, -}; - -struct pmx_mode spear320_small_printers_mode = { - .id = SMALL_PRINTERS_MODE, - .name = "Small Printers Mode", - .mask = 0x03, -}; - -/* devices */ -static struct pmx_dev_mode pmx_clcd_modes[] = { - { - .ids = AUTO_NET_SMII_MODE, - .mask = 0x0, - }, -}; - -struct pmx_dev spear320_pmx_clcd = { - .name = "clcd", - .modes = pmx_clcd_modes, - .mode_count = ARRAY_SIZE(pmx_clcd_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_emi_modes[] = { - { - .ids = AUTO_EXP_MODE, - .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK, - }, -}; - -struct pmx_dev spear320_pmx_emi = { - .name = "emi", - .modes = pmx_emi_modes, - .mode_count = ARRAY_SIZE(pmx_emi_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_fsmc_modes[] = { - { - .ids = ALL_MODES, - .mask = 0x0, - }, -}; - -struct pmx_dev spear320_pmx_fsmc = { - .name = "fsmc", - .modes = pmx_fsmc_modes, - .mode_count = ARRAY_SIZE(pmx_fsmc_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_spp_modes[] = { - { - .ids = SMALL_PRINTERS_MODE, - .mask = 0x0, - }, -}; - -struct pmx_dev spear320_pmx_spp = { - .name = "spp", - .modes = pmx_spp_modes, - .mode_count = ARRAY_SIZE(pmx_spp_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_sdhci_modes[] = { - { - .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE | - SMALL_PRINTERS_MODE, - .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK, - }, -}; - -struct pmx_dev spear320_pmx_sdhci = { - .name = "sdhci", - .modes = pmx_sdhci_modes, - .mode_count = ARRAY_SIZE(pmx_sdhci_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_i2s_modes[] = { - { - .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE, - .mask = PMX_UART0_MODEM_MASK, - }, -}; - -struct pmx_dev spear320_pmx_i2s = { - .name = "i2s", - .modes = pmx_i2s_modes, - .mode_count = ARRAY_SIZE(pmx_i2s_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_uart1_modes[] = { - { - .ids = ALL_MODES, - .mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK, - }, -}; - -struct pmx_dev spear320_pmx_uart1 = { - .name = "uart1", - .modes = pmx_uart1_modes, - .mode_count = ARRAY_SIZE(pmx_uart1_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_uart1_modem_modes[] = { - { - .ids = AUTO_EXP_MODE, - .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK | - PMX_SSP_CS_MASK, - }, { - .ids = SMALL_PRINTERS_MODE, - .mask = PMX_GPIO_PIN3_MASK | PMX_GPIO_PIN4_MASK | - PMX_GPIO_PIN5_MASK | PMX_SSP_CS_MASK, - }, -}; - -struct pmx_dev spear320_pmx_uart1_modem = { - .name = "uart1_modem", - .modes = pmx_uart1_modem_modes, - .mode_count = ARRAY_SIZE(pmx_uart1_modem_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_uart2_modes[] = { - { - .ids = ALL_MODES, - .mask = PMX_FIRDA_MASK, - }, -}; - -struct pmx_dev spear320_pmx_uart2 = { - .name = "uart2", - .modes = pmx_uart2_modes, - .mode_count = ARRAY_SIZE(pmx_uart2_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_touchscreen_modes[] = { - { - .ids = AUTO_NET_SMII_MODE, - .mask = PMX_SSP_CS_MASK, - }, -}; - -struct pmx_dev spear320_pmx_touchscreen = { - .name = "touchscreen", - .modes = pmx_touchscreen_modes, - .mode_count = ARRAY_SIZE(pmx_touchscreen_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_can_modes[] = { - { - .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE | AUTO_EXP_MODE, - .mask = PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK | - PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK, - }, -}; - -struct pmx_dev spear320_pmx_can = { - .name = "can", - .modes = pmx_can_modes, - .mode_count = ARRAY_SIZE(pmx_can_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_sdhci_led_modes[] = { - { - .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE, - .mask = PMX_SSP_CS_MASK, - }, -}; - -struct pmx_dev spear320_pmx_sdhci_led = { - .name = "sdhci_led", - .modes = pmx_sdhci_led_modes, - .mode_count = ARRAY_SIZE(pmx_sdhci_led_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_pwm0_modes[] = { - { - .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE, - .mask = PMX_UART0_MODEM_MASK, - }, { - .ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE, - .mask = PMX_MII_MASK, - }, -}; - -struct pmx_dev spear320_pmx_pwm0 = { - .name = "pwm0", - .modes = pmx_pwm0_modes, - .mode_count = ARRAY_SIZE(pmx_pwm0_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_pwm1_modes[] = { - { - .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE, - .mask = PMX_UART0_MODEM_MASK, - }, { - .ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE, - .mask = PMX_MII_MASK, - }, -}; - -struct pmx_dev spear320_pmx_pwm1 = { - .name = "pwm1", - .modes = pmx_pwm1_modes, - .mode_count = ARRAY_SIZE(pmx_pwm1_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_pwm2_modes[] = { - { - .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE, - .mask = PMX_SSP_CS_MASK, - }, { - .ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE, - .mask = PMX_MII_MASK, - }, -}; - -struct pmx_dev spear320_pmx_pwm2 = { - .name = "pwm2", - .modes = pmx_pwm2_modes, - .mode_count = ARRAY_SIZE(pmx_pwm2_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_pwm3_modes[] = { - { - .ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE | AUTO_NET_SMII_MODE, - .mask = PMX_MII_MASK, - }, -}; - -struct pmx_dev spear320_pmx_pwm3 = { - .name = "pwm3", - .modes = pmx_pwm3_modes, - .mode_count = ARRAY_SIZE(pmx_pwm3_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_ssp1_modes[] = { - { - .ids = SMALL_PRINTERS_MODE | AUTO_NET_SMII_MODE, - .mask = PMX_MII_MASK, - }, -}; - -struct pmx_dev spear320_pmx_ssp1 = { - .name = "ssp1", - .modes = pmx_ssp1_modes, - .mode_count = ARRAY_SIZE(pmx_ssp1_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_ssp2_modes[] = { - { - .ids = AUTO_NET_SMII_MODE, - .mask = PMX_MII_MASK, - }, -}; - -struct pmx_dev spear320_pmx_ssp2 = { - .name = "ssp2", - .modes = pmx_ssp2_modes, - .mode_count = ARRAY_SIZE(pmx_ssp2_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_mii1_modes[] = { - { - .ids = AUTO_NET_MII_MODE, - .mask = 0x0, - }, -}; - -struct pmx_dev spear320_pmx_mii1 = { - .name = "mii1", - .modes = pmx_mii1_modes, - .mode_count = ARRAY_SIZE(pmx_mii1_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_smii0_modes[] = { - { - .ids = AUTO_NET_SMII_MODE | AUTO_EXP_MODE | SMALL_PRINTERS_MODE, - .mask = PMX_MII_MASK, - }, -}; - -struct pmx_dev spear320_pmx_smii0 = { - .name = "smii0", - .modes = pmx_smii0_modes, - .mode_count = ARRAY_SIZE(pmx_smii0_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_smii1_modes[] = { - { - .ids = AUTO_NET_SMII_MODE | SMALL_PRINTERS_MODE, - .mask = PMX_MII_MASK, - }, -}; - -struct pmx_dev spear320_pmx_smii1 = { - .name = "smii1", - .modes = pmx_smii1_modes, - .mode_count = ARRAY_SIZE(pmx_smii1_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_i2c1_modes[] = { - { - .ids = AUTO_EXP_MODE, - .mask = 0x0, - }, -}; - -struct pmx_dev spear320_pmx_i2c1 = { - .name = "i2c1", - .modes = pmx_i2c1_modes, - .mode_count = ARRAY_SIZE(pmx_i2c1_modes), - .enb_on_reset = 1, -}; - -/* pmx driver structure */ -static struct pmx_driver pmx_driver = { - .mode_reg = {.offset = MODE_CONFIG_REG, .mask = 0x00000007}, - .mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff}, -}; - /* spear3xx shared irq */ static struct shirq_dev_config shirq_ras1_config[] = { { @@ -574,27 +206,6 @@ static struct spear_shirq shirq_intrcomm_ras = { }, }; -/* padmux devices to enable */ -static struct pmx_dev *spear320_evb_pmx_devs[] = { - /* spear3xx specific devices */ - &spear3xx_pmx_i2c, - &spear3xx_pmx_ssp, - &spear3xx_pmx_mii, - &spear3xx_pmx_uart0, - - /* spear320 specific devices */ - &spear320_pmx_fsmc, - &spear320_pmx_sdhci, - &spear320_pmx_i2s, - &spear320_pmx_uart1, - &spear320_pmx_uart2, - &spear320_pmx_can, - &spear320_pmx_pwm0, - &spear320_pmx_pwm1, - &spear320_pmx_pwm2, - &spear320_pmx_mii1, -}; - /* DMAC platform data's slave info */ struct pl08x_channel_data spear320_dma_info[] = { { @@ -832,7 +443,7 @@ static struct of_dev_auxdata spear320_auxdata_lookup[] __initdata = { static void __init spear320_dt_init(void) { void __iomem *base; - int ret = 0; + int ret; pl080_plat_data.slave_channels = spear320_dma_info; pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear320_dma_info); @@ -861,19 +472,6 @@ static void __init spear320_dt_init(void) if (ret) pr_err("Error registering Shared IRQ 4\n"); } - - if (of_machine_is_compatible("st,spear320-evb")) { - /* pmx initialization */ - pmx_driver.base = base; - pmx_driver.mode = &spear320_auto_net_mii_mode; - pmx_driver.devs = spear320_evb_pmx_devs; - pmx_driver.devs_count = ARRAY_SIZE(spear320_evb_pmx_devs); - - ret = pmx_register(&pmx_driver); - if (ret) - pr_err("padmux: registration failed. err no: %d\n", - ret); - } } static const char * const spear320_dt_board_compat[] = { @@ -882,10 +480,19 @@ static const char * const spear320_dt_board_compat[] = { NULL, }; +struct map_desc spear320_io_desc[] __initdata = { + { + .virtual = VA_SPEAR320_SOC_CONFIG_BASE, + .pfn = __phys_to_pfn(SPEAR320_SOC_CONFIG_BASE), + .length = SZ_16M, + .type = MT_DEVICE + }, +}; + static void __init spear320_map_io(void) { + iotable_init(spear320_io_desc, ARRAY_SIZE(spear320_io_desc)); spear3xx_map_io(); - spear320_clk_init(); } DT_MACHINE_START(SPEAR320_DT, "ST SPEAr320 SoC with Flattened Device Tree") diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index 25c6c67d5b07..f22419ed74a8 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -23,431 +23,6 @@ #include <mach/generic.h> #include <mach/spear.h> -/* pad multiplexing support */ -/* devices */ -static struct pmx_dev_mode pmx_firda_modes[] = { - { - .ids = 0xffffffff, - .mask = PMX_FIRDA_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_firda = { - .name = "firda", - .modes = pmx_firda_modes, - .mode_count = ARRAY_SIZE(pmx_firda_modes), - .enb_on_reset = 0, -}; - -static struct pmx_dev_mode pmx_i2c_modes[] = { - { - .ids = 0xffffffff, - .mask = PMX_I2C_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_i2c = { - .name = "i2c", - .modes = pmx_i2c_modes, - .mode_count = ARRAY_SIZE(pmx_i2c_modes), - .enb_on_reset = 0, -}; - -static struct pmx_dev_mode pmx_ssp_cs_modes[] = { - { - .ids = 0xffffffff, - .mask = PMX_SSP_CS_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_ssp_cs = { - .name = "ssp_chip_selects", - .modes = pmx_ssp_cs_modes, - .mode_count = ARRAY_SIZE(pmx_ssp_cs_modes), - .enb_on_reset = 0, -}; - -static struct pmx_dev_mode pmx_ssp_modes[] = { - { - .ids = 0xffffffff, - .mask = PMX_SSP_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_ssp = { - .name = "ssp", - .modes = pmx_ssp_modes, - .mode_count = ARRAY_SIZE(pmx_ssp_modes), - .enb_on_reset = 0, -}; - -static struct pmx_dev_mode pmx_mii_modes[] = { - { - .ids = 0xffffffff, - .mask = PMX_MII_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_mii = { - .name = "mii", - .modes = pmx_mii_modes, - .mode_count = ARRAY_SIZE(pmx_mii_modes), - .enb_on_reset = 0, -}; - -static struct pmx_dev_mode pmx_gpio_pin0_modes[] = { - { - .ids = 0xffffffff, - .mask = PMX_GPIO_PIN0_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_gpio_pin0 = { - .name = "gpio_pin0", - .modes = pmx_gpio_pin0_modes, - .mode_count = ARRAY_SIZE(pmx_gpio_pin0_modes), - .enb_on_reset = 0, -}; - -static struct pmx_dev_mode pmx_gpio_pin1_modes[] = { - { - .ids = 0xffffffff, - .mask = PMX_GPIO_PIN1_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_gpio_pin1 = { - .name = "gpio_pin1", - .modes = pmx_gpio_pin1_modes, - .mode_count = ARRAY_SIZE(pmx_gpio_pin1_modes), - .enb_on_reset = 0, -}; - -static struct pmx_dev_mode pmx_gpio_pin2_modes[] = { - { - .ids = 0xffffffff, - .mask = PMX_GPIO_PIN2_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_gpio_pin2 = { - .name = "gpio_pin2", - .modes = pmx_gpio_pin2_modes, - .mode_count = ARRAY_SIZE(pmx_gpio_pin2_modes), - .enb_on_reset = 0, -}; - -static struct pmx_dev_mode pmx_gpio_pin3_modes[] = { - { - .ids = 0xffffffff, - .mask = PMX_GPIO_PIN3_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_gpio_pin3 = { - .name = "gpio_pin3", - .modes = pmx_gpio_pin3_modes, - .mode_count = ARRAY_SIZE(pmx_gpio_pin3_modes), - .enb_on_reset = 0, -}; - -static struct pmx_dev_mode pmx_gpio_pin4_modes[] = { - { - .ids = 0xffffffff, - .mask = PMX_GPIO_PIN4_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_gpio_pin4 = { - .name = "gpio_pin4", - .modes = pmx_gpio_pin4_modes, - .mode_count = ARRAY_SIZE(pmx_gpio_pin4_modes), - .enb_on_reset = 0, -}; - -static struct pmx_dev_mode pmx_gpio_pin5_modes[] = { - { - .ids = 0xffffffff, - .mask = PMX_GPIO_PIN5_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_gpio_pin5 = { - .name = "gpio_pin5", - .modes = pmx_gpio_pin5_modes, - .mode_count = ARRAY_SIZE(pmx_gpio_pin5_modes), - .enb_on_reset = 0, -}; - -static struct pmx_dev_mode pmx_uart0_modem_modes[] = { - { - .ids = 0xffffffff, - .mask = PMX_UART0_MODEM_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_uart0_modem = { - .name = "uart0_modem", - .modes = pmx_uart0_modem_modes, - .mode_count = ARRAY_SIZE(pmx_uart0_modem_modes), - .enb_on_reset = 0, -}; - -static struct pmx_dev_mode pmx_uart0_modes[] = { - { - .ids = 0xffffffff, - .mask = PMX_UART0_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_uart0 = { - .name = "uart0", - .modes = pmx_uart0_modes, - .mode_count = ARRAY_SIZE(pmx_uart0_modes), - .enb_on_reset = 0, -}; - -static struct pmx_dev_mode pmx_timer_3_4_modes[] = { - { - .ids = 0xffffffff, - .mask = PMX_TIMER_3_4_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_timer_3_4 = { - .name = "timer_3_4", - .modes = pmx_timer_3_4_modes, - .mode_count = ARRAY_SIZE(pmx_timer_3_4_modes), - .enb_on_reset = 0, -}; - -static struct pmx_dev_mode pmx_timer_1_2_modes[] = { - { - .ids = 0xffffffff, - .mask = PMX_TIMER_1_2_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_timer_1_2 = { - .name = "timer_1_2", - .modes = pmx_timer_1_2_modes, - .mode_count = ARRAY_SIZE(pmx_timer_1_2_modes), - .enb_on_reset = 0, -}; - -#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320) -/* plgpios devices */ -static struct pmx_dev_mode pmx_plgpio_0_1_modes[] = { - { - .ids = 0x00, - .mask = PMX_FIRDA_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_plgpio_0_1 = { - .name = "plgpio 0 and 1", - .modes = pmx_plgpio_0_1_modes, - .mode_count = ARRAY_SIZE(pmx_plgpio_0_1_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_plgpio_2_3_modes[] = { - { - .ids = 0x00, - .mask = PMX_UART0_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_plgpio_2_3 = { - .name = "plgpio 2 and 3", - .modes = pmx_plgpio_2_3_modes, - .mode_count = ARRAY_SIZE(pmx_plgpio_2_3_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_plgpio_4_5_modes[] = { - { - .ids = 0x00, - .mask = PMX_I2C_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_plgpio_4_5 = { - .name = "plgpio 4 and 5", - .modes = pmx_plgpio_4_5_modes, - .mode_count = ARRAY_SIZE(pmx_plgpio_4_5_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_plgpio_6_9_modes[] = { - { - .ids = 0x00, - .mask = PMX_SSP_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_plgpio_6_9 = { - .name = "plgpio 6 to 9", - .modes = pmx_plgpio_6_9_modes, - .mode_count = ARRAY_SIZE(pmx_plgpio_6_9_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_plgpio_10_27_modes[] = { - { - .ids = 0x00, - .mask = PMX_MII_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_plgpio_10_27 = { - .name = "plgpio 10 to 27", - .modes = pmx_plgpio_10_27_modes, - .mode_count = ARRAY_SIZE(pmx_plgpio_10_27_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_plgpio_28_modes[] = { - { - .ids = 0x00, - .mask = PMX_GPIO_PIN0_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_plgpio_28 = { - .name = "plgpio 28", - .modes = pmx_plgpio_28_modes, - .mode_count = ARRAY_SIZE(pmx_plgpio_28_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_plgpio_29_modes[] = { - { - .ids = 0x00, - .mask = PMX_GPIO_PIN1_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_plgpio_29 = { - .name = "plgpio 29", - .modes = pmx_plgpio_29_modes, - .mode_count = ARRAY_SIZE(pmx_plgpio_29_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_plgpio_30_modes[] = { - { - .ids = 0x00, - .mask = PMX_GPIO_PIN2_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_plgpio_30 = { - .name = "plgpio 30", - .modes = pmx_plgpio_30_modes, - .mode_count = ARRAY_SIZE(pmx_plgpio_30_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_plgpio_31_modes[] = { - { - .ids = 0x00, - .mask = PMX_GPIO_PIN3_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_plgpio_31 = { - .name = "plgpio 31", - .modes = pmx_plgpio_31_modes, - .mode_count = ARRAY_SIZE(pmx_plgpio_31_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_plgpio_32_modes[] = { - { - .ids = 0x00, - .mask = PMX_GPIO_PIN4_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_plgpio_32 = { - .name = "plgpio 32", - .modes = pmx_plgpio_32_modes, - .mode_count = ARRAY_SIZE(pmx_plgpio_32_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_plgpio_33_modes[] = { - { - .ids = 0x00, - .mask = PMX_GPIO_PIN5_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_plgpio_33 = { - .name = "plgpio 33", - .modes = pmx_plgpio_33_modes, - .mode_count = ARRAY_SIZE(pmx_plgpio_33_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_plgpio_34_36_modes[] = { - { - .ids = 0x00, - .mask = PMX_SSP_CS_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_plgpio_34_36 = { - .name = "plgpio 34 to 36", - .modes = pmx_plgpio_34_36_modes, - .mode_count = ARRAY_SIZE(pmx_plgpio_34_36_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_plgpio_37_42_modes[] = { - { - .ids = 0x00, - .mask = PMX_UART0_MODEM_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_plgpio_37_42 = { - .name = "plgpio 37 to 42", - .modes = pmx_plgpio_37_42_modes, - .mode_count = ARRAY_SIZE(pmx_plgpio_37_42_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_plgpio_43_44_47_48_modes[] = { - { - .ids = 0x00, - .mask = PMX_TIMER_1_2_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_plgpio_43_44_47_48 = { - .name = "plgpio 43, 44, 47 and 48", - .modes = pmx_plgpio_43_44_47_48_modes, - .mode_count = ARRAY_SIZE(pmx_plgpio_43_44_47_48_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_plgpio_45_46_49_50_modes[] = { - { - .ids = 0x00, - .mask = PMX_TIMER_3_4_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50 = { - .name = "plgpio 45, 46, 49 and 50", - .modes = pmx_plgpio_45_46_49_50_modes, - .mode_count = ARRAY_SIZE(pmx_plgpio_45_46_49_50_modes), - .enb_on_reset = 1, -}; -#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */ - /* ssp device registration */ struct pl022_ssp_controller pl022_plat_data = { .bus_id = 0, @@ -515,6 +90,8 @@ static void __init spear3xx_timer_init(void) char pclk_name[] = "pll3_48m_clk"; struct clk *gpt_clk, *pclk; + spear3xx_clk_init(); + /* get the system timer clock */ gpt_clk = clk_get_sys("gpt0", NULL); if (IS_ERR(gpt_clk)) { diff --git a/arch/arm/mach-spear6xx/Makefile b/arch/arm/mach-spear6xx/Makefile index 76e5750552fc..898831d93f37 100644 --- a/arch/arm/mach-spear6xx/Makefile +++ b/arch/arm/mach-spear6xx/Makefile @@ -3,4 +3,4 @@ # # common files -obj-y += clock.o spear6xx.o +obj-y += spear6xx.o diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c deleted file mode 100644 index bef77d43db87..000000000000 --- a/arch/arm/mach-spear6xx/clock.c +++ /dev/null @@ -1,789 +0,0 @@ -/* - * arch/arm/mach-spear6xx/clock.c - * - * SPEAr6xx machines clock framework source file - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/init.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <plat/clock.h> -#include <mach/misc_regs.h> -#include <mach/spear.h> - -#define PLL1_CTR (MISC_BASE + 0x008) -#define PLL1_FRQ (MISC_BASE + 0x00C) -#define PLL1_MOD (MISC_BASE + 0x010) -#define PLL2_CTR (MISC_BASE + 0x014) -/* PLL_CTR register masks */ -#define PLL_ENABLE 2 -#define PLL_MODE_SHIFT 4 -#define PLL_MODE_MASK 0x3 -#define PLL_MODE_NORMAL 0 -#define PLL_MODE_FRACTION 1 -#define PLL_MODE_DITH_DSB 2 -#define PLL_MODE_DITH_SSB 3 - -#define PLL2_FRQ (MISC_BASE + 0x018) -/* PLL FRQ register masks */ -#define PLL_DIV_N_SHIFT 0 -#define PLL_DIV_N_MASK 0xFF -#define PLL_DIV_P_SHIFT 8 -#define PLL_DIV_P_MASK 0x7 -#define PLL_NORM_FDBK_M_SHIFT 24 -#define PLL_NORM_FDBK_M_MASK 0xFF -#define PLL_DITH_FDBK_M_SHIFT 16 -#define PLL_DITH_FDBK_M_MASK 0xFFFF - -#define PLL2_MOD (MISC_BASE + 0x01C) -#define PLL_CLK_CFG (MISC_BASE + 0x020) -#define CORE_CLK_CFG (MISC_BASE + 0x024) -/* CORE CLK CFG register masks */ -#define PLL_HCLK_RATIO_SHIFT 10 -#define PLL_HCLK_RATIO_MASK 0x3 -#define HCLK_PCLK_RATIO_SHIFT 8 -#define HCLK_PCLK_RATIO_MASK 0x3 - -#define PERIP_CLK_CFG (MISC_BASE + 0x028) -/* PERIP_CLK_CFG register masks */ -#define CLCD_CLK_SHIFT 2 -#define CLCD_CLK_MASK 0x3 -#define UART_CLK_SHIFT 4 -#define UART_CLK_MASK 0x1 -#define FIRDA_CLK_SHIFT 5 -#define FIRDA_CLK_MASK 0x3 -#define GPT0_CLK_SHIFT 8 -#define GPT1_CLK_SHIFT 10 -#define GPT2_CLK_SHIFT 11 -#define GPT3_CLK_SHIFT 12 -#define GPT_CLK_MASK 0x1 -#define AUX_CLK_PLL3_VAL 0 -#define AUX_CLK_PLL1_VAL 1 - -#define PERIP1_CLK_ENB (MISC_BASE + 0x02C) -/* PERIP1_CLK_ENB register masks */ -#define UART0_CLK_ENB 3 -#define UART1_CLK_ENB 4 -#define SSP0_CLK_ENB 5 -#define SSP1_CLK_ENB 6 -#define I2C_CLK_ENB 7 -#define JPEG_CLK_ENB 8 -#define FSMC_CLK_ENB 9 -#define FIRDA_CLK_ENB 10 -#define GPT2_CLK_ENB 11 -#define GPT3_CLK_ENB 12 -#define GPIO2_CLK_ENB 13 -#define SSP2_CLK_ENB 14 -#define ADC_CLK_ENB 15 -#define GPT1_CLK_ENB 11 -#define RTC_CLK_ENB 17 -#define GPIO1_CLK_ENB 18 -#define DMA_CLK_ENB 19 -#define SMI_CLK_ENB 21 -#define CLCD_CLK_ENB 22 -#define GMAC_CLK_ENB 23 -#define USBD_CLK_ENB 24 -#define USBH0_CLK_ENB 25 -#define USBH1_CLK_ENB 26 - -#define PRSC1_CLK_CFG (MISC_BASE + 0x044) -#define PRSC2_CLK_CFG (MISC_BASE + 0x048) -#define PRSC3_CLK_CFG (MISC_BASE + 0x04C) -/* gpt synthesizer register masks */ -#define GPT_MSCALE_SHIFT 0 -#define GPT_MSCALE_MASK 0xFFF -#define GPT_NSCALE_SHIFT 12 -#define GPT_NSCALE_MASK 0xF - -#define AMEM_CLK_CFG (MISC_BASE + 0x050) -#define EXPI_CLK_CFG (MISC_BASE + 0x054) -#define CLCD_CLK_SYNT (MISC_BASE + 0x05C) -#define FIRDA_CLK_SYNT (MISC_BASE + 0x060) -#define UART_CLK_SYNT (MISC_BASE + 0x064) -#define GMAC_CLK_SYNT (MISC_BASE + 0x068) -#define RAS1_CLK_SYNT (MISC_BASE + 0x06C) -#define RAS2_CLK_SYNT (MISC_BASE + 0x070) -#define RAS3_CLK_SYNT (MISC_BASE + 0x074) -#define RAS4_CLK_SYNT (MISC_BASE + 0x078) -/* aux clk synthesiser register masks for irda to ras4 */ -#define AUX_SYNT_ENB 31 -#define AUX_EQ_SEL_SHIFT 30 -#define AUX_EQ_SEL_MASK 1 -#define AUX_EQ1_SEL 0 -#define AUX_EQ2_SEL 1 -#define AUX_XSCALE_SHIFT 16 -#define AUX_XSCALE_MASK 0xFFF -#define AUX_YSCALE_SHIFT 0 -#define AUX_YSCALE_MASK 0xFFF - -/* root clks */ -/* 32 KHz oscillator clock */ -static struct clk osc_32k_clk = { - .flags = ALWAYS_ENABLED, - .rate = 32000, -}; - -/* 30 MHz oscillator clock */ -static struct clk osc_30m_clk = { - .flags = ALWAYS_ENABLED, - .rate = 30000000, -}; - -/* clock derived from 32 KHz osc clk */ -/* rtc clock */ -static struct clk rtc_clk = { - .pclk = &osc_32k_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = RTC_CLK_ENB, - .recalc = &follow_parent, -}; - -/* clock derived from 30 MHz osc clk */ -/* pll masks structure */ -static struct pll_clk_masks pll1_masks = { - .mode_mask = PLL_MODE_MASK, - .mode_shift = PLL_MODE_SHIFT, - .norm_fdbk_m_mask = PLL_NORM_FDBK_M_MASK, - .norm_fdbk_m_shift = PLL_NORM_FDBK_M_SHIFT, - .dith_fdbk_m_mask = PLL_DITH_FDBK_M_MASK, - .dith_fdbk_m_shift = PLL_DITH_FDBK_M_SHIFT, - .div_p_mask = PLL_DIV_P_MASK, - .div_p_shift = PLL_DIV_P_SHIFT, - .div_n_mask = PLL_DIV_N_MASK, - .div_n_shift = PLL_DIV_N_SHIFT, -}; - -/* pll1 configuration structure */ -static struct pll_clk_config pll1_config = { - .mode_reg = PLL1_CTR, - .cfg_reg = PLL1_FRQ, - .masks = &pll1_masks, -}; - -/* pll rate configuration table, in ascending order of rates */ -struct pll_rate_tbl pll_rtbl[] = { - {.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */ - {.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */ -}; - -/* PLL1 clock */ -static struct clk pll1_clk = { - .flags = ENABLED_ON_INIT, - .pclk = &osc_30m_clk, - .en_reg = PLL1_CTR, - .en_reg_bit = PLL_ENABLE, - .calc_rate = &pll_calc_rate, - .recalc = &pll_clk_recalc, - .set_rate = &pll_clk_set_rate, - .rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1}, - .private_data = &pll1_config, -}; - -/* PLL3 48 MHz clock */ -static struct clk pll3_48m_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &osc_30m_clk, - .rate = 48000000, -}; - -/* watch dog timer clock */ -static struct clk wdt_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &osc_30m_clk, - .recalc = &follow_parent, -}; - -/* clock derived from pll1 clk */ -/* cpu clock */ -static struct clk cpu_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll1_clk, - .recalc = &follow_parent, -}; - -/* ahb masks structure */ -static struct bus_clk_masks ahb_masks = { - .mask = PLL_HCLK_RATIO_MASK, - .shift = PLL_HCLK_RATIO_SHIFT, -}; - -/* ahb configuration structure */ -static struct bus_clk_config ahb_config = { - .reg = CORE_CLK_CFG, - .masks = &ahb_masks, -}; - -/* ahb rate configuration table, in ascending order of rates */ -struct bus_rate_tbl bus_rtbl[] = { - {.div = 3}, /* == parent divided by 4 */ - {.div = 2}, /* == parent divided by 3 */ - {.div = 1}, /* == parent divided by 2 */ - {.div = 0}, /* == parent divided by 1 */ -}; - -/* ahb clock */ -static struct clk ahb_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll1_clk, - .calc_rate = &bus_calc_rate, - .recalc = &bus_clk_recalc, - .set_rate = &bus_clk_set_rate, - .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2}, - .private_data = &ahb_config, -}; - -/* auxiliary synthesizers masks */ -static struct aux_clk_masks aux_masks = { - .eq_sel_mask = AUX_EQ_SEL_MASK, - .eq_sel_shift = AUX_EQ_SEL_SHIFT, - .eq1_mask = AUX_EQ1_SEL, - .eq2_mask = AUX_EQ2_SEL, - .xscale_sel_mask = AUX_XSCALE_MASK, - .xscale_sel_shift = AUX_XSCALE_SHIFT, - .yscale_sel_mask = AUX_YSCALE_MASK, - .yscale_sel_shift = AUX_YSCALE_SHIFT, -}; - -/* uart configurations */ -static struct aux_clk_config uart_synth_config = { - .synth_reg = UART_CLK_SYNT, - .masks = &aux_masks, -}; - -/* aux rate configuration table, in ascending order of rates */ -struct aux_rate_tbl aux_rtbl[] = { - /* For PLL1 = 332 MHz */ - {.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */ - {.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */ - {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */ -}; - -/* uart synth clock */ -static struct clk uart_synth_clk = { - .en_reg = UART_CLK_SYNT, - .en_reg_bit = AUX_SYNT_ENB, - .pclk = &pll1_clk, - .calc_rate = &aux_calc_rate, - .recalc = &aux_clk_recalc, - .set_rate = &aux_clk_set_rate, - .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2}, - .private_data = &uart_synth_config, -}; - -/* uart parents */ -static struct pclk_info uart_pclk_info[] = { - { - .pclk = &uart_synth_clk, - .pclk_val = AUX_CLK_PLL1_VAL, - }, { - .pclk = &pll3_48m_clk, - .pclk_val = AUX_CLK_PLL3_VAL, - }, -}; - -/* uart parent select structure */ -static struct pclk_sel uart_pclk_sel = { - .pclk_info = uart_pclk_info, - .pclk_count = ARRAY_SIZE(uart_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = UART_CLK_MASK, -}; - -/* uart0 clock */ -static struct clk uart0_clk = { - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = UART0_CLK_ENB, - .pclk_sel = &uart_pclk_sel, - .pclk_sel_shift = UART_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* uart1 clock */ -static struct clk uart1_clk = { - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = UART1_CLK_ENB, - .pclk_sel = &uart_pclk_sel, - .pclk_sel_shift = UART_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* firda configurations */ -static struct aux_clk_config firda_synth_config = { - .synth_reg = FIRDA_CLK_SYNT, - .masks = &aux_masks, -}; - -/* firda synth clock */ -static struct clk firda_synth_clk = { - .en_reg = FIRDA_CLK_SYNT, - .en_reg_bit = AUX_SYNT_ENB, - .pclk = &pll1_clk, - .calc_rate = &aux_calc_rate, - .recalc = &aux_clk_recalc, - .set_rate = &aux_clk_set_rate, - .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2}, - .private_data = &firda_synth_config, -}; - -/* firda parents */ -static struct pclk_info firda_pclk_info[] = { - { - .pclk = &firda_synth_clk, - .pclk_val = AUX_CLK_PLL1_VAL, - }, { - .pclk = &pll3_48m_clk, - .pclk_val = AUX_CLK_PLL3_VAL, - }, -}; - -/* firda parent select structure */ -static struct pclk_sel firda_pclk_sel = { - .pclk_info = firda_pclk_info, - .pclk_count = ARRAY_SIZE(firda_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = FIRDA_CLK_MASK, -}; - -/* firda clock */ -static struct clk firda_clk = { - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = FIRDA_CLK_ENB, - .pclk_sel = &firda_pclk_sel, - .pclk_sel_shift = FIRDA_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* clcd configurations */ -static struct aux_clk_config clcd_synth_config = { - .synth_reg = CLCD_CLK_SYNT, - .masks = &aux_masks, -}; - -/* firda synth clock */ -static struct clk clcd_synth_clk = { - .en_reg = CLCD_CLK_SYNT, - .en_reg_bit = AUX_SYNT_ENB, - .pclk = &pll1_clk, - .calc_rate = &aux_calc_rate, - .recalc = &aux_clk_recalc, - .set_rate = &aux_clk_set_rate, - .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2}, - .private_data = &clcd_synth_config, -}; - -/* clcd parents */ -static struct pclk_info clcd_pclk_info[] = { - { - .pclk = &clcd_synth_clk, - .pclk_val = AUX_CLK_PLL1_VAL, - }, { - .pclk = &pll3_48m_clk, - .pclk_val = AUX_CLK_PLL3_VAL, - }, -}; - -/* clcd parent select structure */ -static struct pclk_sel clcd_pclk_sel = { - .pclk_info = clcd_pclk_info, - .pclk_count = ARRAY_SIZE(clcd_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = CLCD_CLK_MASK, -}; - -/* clcd clock */ -static struct clk clcd_clk = { - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = CLCD_CLK_ENB, - .pclk_sel = &clcd_pclk_sel, - .pclk_sel_shift = CLCD_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* gpt synthesizer masks */ -static struct gpt_clk_masks gpt_masks = { - .mscale_sel_mask = GPT_MSCALE_MASK, - .mscale_sel_shift = GPT_MSCALE_SHIFT, - .nscale_sel_mask = GPT_NSCALE_MASK, - .nscale_sel_shift = GPT_NSCALE_SHIFT, -}; - -/* gpt rate configuration table, in ascending order of rates */ -struct gpt_rate_tbl gpt_rtbl[] = { - /* For pll1 = 332 MHz */ - {.mscale = 4, .nscale = 0}, /* 41.5 MHz */ - {.mscale = 2, .nscale = 0}, /* 55.3 MHz */ - {.mscale = 1, .nscale = 0}, /* 83 MHz */ -}; - -/* gpt0 synth clk config*/ -static struct gpt_clk_config gpt0_synth_config = { - .synth_reg = PRSC1_CLK_CFG, - .masks = &gpt_masks, -}; - -/* gpt synth clock */ -static struct clk gpt0_synth_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll1_clk, - .calc_rate = &gpt_calc_rate, - .recalc = &gpt_clk_recalc, - .set_rate = &gpt_clk_set_rate, - .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2}, - .private_data = &gpt0_synth_config, -}; - -/* gpt parents */ -static struct pclk_info gpt0_pclk_info[] = { - { - .pclk = &gpt0_synth_clk, - .pclk_val = AUX_CLK_PLL1_VAL, - }, { - .pclk = &pll3_48m_clk, - .pclk_val = AUX_CLK_PLL3_VAL, - }, -}; - -/* gpt parent select structure */ -static struct pclk_sel gpt0_pclk_sel = { - .pclk_info = gpt0_pclk_info, - .pclk_count = ARRAY_SIZE(gpt0_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = GPT_CLK_MASK, -}; - -/* gpt0 ARM1 subsystem timer clock */ -static struct clk gpt0_clk = { - .flags = ALWAYS_ENABLED, - .pclk_sel = &gpt0_pclk_sel, - .pclk_sel_shift = GPT0_CLK_SHIFT, - .recalc = &follow_parent, -}; - - -/* Note: gpt0 and gpt1 share same parent clocks */ -/* gpt parent select structure */ -static struct pclk_sel gpt1_pclk_sel = { - .pclk_info = gpt0_pclk_info, - .pclk_count = ARRAY_SIZE(gpt0_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = GPT_CLK_MASK, -}; - -/* gpt1 timer clock */ -static struct clk gpt1_clk = { - .flags = ALWAYS_ENABLED, - .pclk_sel = &gpt1_pclk_sel, - .pclk_sel_shift = GPT1_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* gpt2 synth clk config*/ -static struct gpt_clk_config gpt2_synth_config = { - .synth_reg = PRSC2_CLK_CFG, - .masks = &gpt_masks, -}; - -/* gpt synth clock */ -static struct clk gpt2_synth_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll1_clk, - .calc_rate = &gpt_calc_rate, - .recalc = &gpt_clk_recalc, - .set_rate = &gpt_clk_set_rate, - .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2}, - .private_data = &gpt2_synth_config, -}; - -/* gpt parents */ -static struct pclk_info gpt2_pclk_info[] = { - { - .pclk = &gpt2_synth_clk, - .pclk_val = AUX_CLK_PLL1_VAL, - }, { - .pclk = &pll3_48m_clk, - .pclk_val = AUX_CLK_PLL3_VAL, - }, -}; - -/* gpt parent select structure */ -static struct pclk_sel gpt2_pclk_sel = { - .pclk_info = gpt2_pclk_info, - .pclk_count = ARRAY_SIZE(gpt2_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = GPT_CLK_MASK, -}; - -/* gpt2 timer clock */ -static struct clk gpt2_clk = { - .flags = ALWAYS_ENABLED, - .pclk_sel = &gpt2_pclk_sel, - .pclk_sel_shift = GPT2_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* gpt3 synth clk config*/ -static struct gpt_clk_config gpt3_synth_config = { - .synth_reg = PRSC3_CLK_CFG, - .masks = &gpt_masks, -}; - -/* gpt synth clock */ -static struct clk gpt3_synth_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll1_clk, - .calc_rate = &gpt_calc_rate, - .recalc = &gpt_clk_recalc, - .set_rate = &gpt_clk_set_rate, - .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2}, - .private_data = &gpt3_synth_config, -}; - -/* gpt parents */ -static struct pclk_info gpt3_pclk_info[] = { - { - .pclk = &gpt3_synth_clk, - .pclk_val = AUX_CLK_PLL1_VAL, - }, { - .pclk = &pll3_48m_clk, - .pclk_val = AUX_CLK_PLL3_VAL, - }, -}; - -/* gpt parent select structure */ -static struct pclk_sel gpt3_pclk_sel = { - .pclk_info = gpt3_pclk_info, - .pclk_count = ARRAY_SIZE(gpt3_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = GPT_CLK_MASK, -}; - -/* gpt3 timer clock */ -static struct clk gpt3_clk = { - .flags = ALWAYS_ENABLED, - .pclk_sel = &gpt3_pclk_sel, - .pclk_sel_shift = GPT3_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* clock derived from pll3 clk */ -/* usbh0 clock */ -static struct clk usbh0_clk = { - .pclk = &pll3_48m_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = USBH0_CLK_ENB, - .recalc = &follow_parent, -}; - -/* usbh1 clock */ -static struct clk usbh1_clk = { - .pclk = &pll3_48m_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = USBH1_CLK_ENB, - .recalc = &follow_parent, -}; - -/* usbd clock */ -static struct clk usbd_clk = { - .pclk = &pll3_48m_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = USBD_CLK_ENB, - .recalc = &follow_parent, -}; - -/* clock derived from ahb clk */ -/* apb masks structure */ -static struct bus_clk_masks apb_masks = { - .mask = HCLK_PCLK_RATIO_MASK, - .shift = HCLK_PCLK_RATIO_SHIFT, -}; - -/* apb configuration structure */ -static struct bus_clk_config apb_config = { - .reg = CORE_CLK_CFG, - .masks = &apb_masks, -}; - -/* apb clock */ -static struct clk apb_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &ahb_clk, - .calc_rate = &bus_calc_rate, - .recalc = &bus_clk_recalc, - .set_rate = &bus_clk_set_rate, - .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2}, - .private_data = &apb_config, -}; - -/* i2c clock */ -static struct clk i2c_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = I2C_CLK_ENB, - .recalc = &follow_parent, -}; - -/* dma clock */ -static struct clk dma_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = DMA_CLK_ENB, - .recalc = &follow_parent, -}; - -/* jpeg clock */ -static struct clk jpeg_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = JPEG_CLK_ENB, - .recalc = &follow_parent, -}; - -/* gmac clock */ -static struct clk gmac_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = GMAC_CLK_ENB, - .recalc = &follow_parent, -}; - -/* smi clock */ -static struct clk smi_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = SMI_CLK_ENB, - .recalc = &follow_parent, -}; - -/* fsmc clock */ -static struct clk fsmc_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = FSMC_CLK_ENB, - .recalc = &follow_parent, -}; - -/* clock derived from apb clk */ -/* adc clock */ -static struct clk adc_clk = { - .pclk = &apb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = ADC_CLK_ENB, - .recalc = &follow_parent, -}; - -/* ssp0 clock */ -static struct clk ssp0_clk = { - .pclk = &apb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = SSP0_CLK_ENB, - .recalc = &follow_parent, -}; - -/* ssp1 clock */ -static struct clk ssp1_clk = { - .pclk = &apb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = SSP1_CLK_ENB, - .recalc = &follow_parent, -}; - -/* ssp2 clock */ -static struct clk ssp2_clk = { - .pclk = &apb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = SSP2_CLK_ENB, - .recalc = &follow_parent, -}; - -/* gpio0 ARM subsystem clock */ -static struct clk gpio0_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; - -/* gpio1 clock */ -static struct clk gpio1_clk = { - .pclk = &apb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = GPIO1_CLK_ENB, - .recalc = &follow_parent, -}; - -/* gpio2 clock */ -static struct clk gpio2_clk = { - .pclk = &apb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = GPIO2_CLK_ENB, - .recalc = &follow_parent, -}; - -static struct clk dummy_apb_pclk; - -/* array of all spear 6xx clock lookups */ -static struct clk_lookup spear_clk_lookups[] = { - CLKDEV_INIT(NULL, "apb_pclk", &dummy_apb_pclk), - /* root clks */ - CLKDEV_INIT(NULL, "osc_32k_clk", &osc_32k_clk), - CLKDEV_INIT(NULL, "osc_30m_clk", &osc_30m_clk), - /* clock derived from 32 KHz os clk */ - CLKDEV_INIT("rtc-spear", NULL, &rtc_clk), - /* clock derived from 30 MHz os clk */ - CLKDEV_INIT(NULL, "pll1_clk", &pll1_clk), - CLKDEV_INIT(NULL, "pll3_48m_clk", &pll3_48m_clk), - CLKDEV_INIT("wdt", NULL, &wdt_clk), - /* clock derived from pll1 clk */ - CLKDEV_INIT(NULL, "cpu_clk", &cpu_clk), - CLKDEV_INIT(NULL, "ahb_clk", &ahb_clk), - CLKDEV_INIT(NULL, "uart_synth_clk", &uart_synth_clk), - CLKDEV_INIT(NULL, "firda_synth_clk", &firda_synth_clk), - CLKDEV_INIT(NULL, "clcd_synth_clk", &clcd_synth_clk), - CLKDEV_INIT(NULL, "gpt0_synth_clk", &gpt0_synth_clk), - CLKDEV_INIT(NULL, "gpt2_synth_clk", &gpt2_synth_clk), - CLKDEV_INIT(NULL, "gpt3_synth_clk", &gpt3_synth_clk), - CLKDEV_INIT("d0000000.serial", NULL, &uart0_clk), - CLKDEV_INIT("d0080000.serial", NULL, &uart1_clk), - CLKDEV_INIT("firda", NULL, &firda_clk), - CLKDEV_INIT("clcd", NULL, &clcd_clk), - CLKDEV_INIT("gpt0", NULL, &gpt0_clk), - CLKDEV_INIT("gpt1", NULL, &gpt1_clk), - CLKDEV_INIT("gpt2", NULL, &gpt2_clk), - CLKDEV_INIT("gpt3", NULL, &gpt3_clk), - /* clock derived from pll3 clk */ - CLKDEV_INIT("designware_udc", NULL, &usbd_clk), - CLKDEV_INIT(NULL, "usbh.0_clk", &usbh0_clk), - CLKDEV_INIT(NULL, "usbh.1_clk", &usbh1_clk), - /* clock derived from ahb clk */ - CLKDEV_INIT(NULL, "apb_clk", &apb_clk), - CLKDEV_INIT("d0200000.i2c", NULL, &i2c_clk), - CLKDEV_INIT("fc400000.dma", NULL, &dma_clk), - CLKDEV_INIT("jpeg", NULL, &jpeg_clk), - CLKDEV_INIT("gmac", NULL, &gmac_clk), - CLKDEV_INIT("fc000000.flash", NULL, &smi_clk), - CLKDEV_INIT("d1800000.flash", NULL, &fsmc_clk), - /* clock derived from apb clk */ - CLKDEV_INIT("adc", NULL, &adc_clk), - CLKDEV_INIT("ssp-pl022.0", NULL, &ssp0_clk), - CLKDEV_INIT("ssp-pl022.1", NULL, &ssp1_clk), - CLKDEV_INIT("ssp-pl022.2", NULL, &ssp2_clk), - CLKDEV_INIT("f0100000.gpio", NULL, &gpio0_clk), - CLKDEV_INIT("fc980000.gpio", NULL, &gpio1_clk), - CLKDEV_INIT("d8100000.gpio", NULL, &gpio2_clk), -}; - -void __init spear6xx_clk_init(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++) - clk_register(&spear_clk_lookups[i]); - - clk_init(); -} diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h index 2b9aaa6cdd11..179e45774b3a 100644 --- a/arch/arm/mach-spear6xx/include/mach/misc_regs.h +++ b/arch/arm/mach-spear6xx/include/mach/misc_regs.h @@ -14,6 +14,8 @@ #ifndef __MACH_MISC_REGS_H #define __MACH_MISC_REGS_H +#include <mach/spear.h> + #define MISC_BASE IOMEM(VA_SPEAR6XX_ICM3_MISC_REG_BASE) #define DMA_CHN_CFG (MISC_BASE + 0x0A0) diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c index 7ae4d5be6cb5..2e2e3596583e 100644 --- a/arch/arm/mach-spear6xx/spear6xx.c +++ b/arch/arm/mach-spear6xx/spear6xx.c @@ -419,9 +419,6 @@ struct map_desc spear6xx_io_desc[] __initdata = { void __init spear6xx_map_io(void) { iotable_init(spear6xx_io_desc, ARRAY_SIZE(spear6xx_io_desc)); - - /* This will initialize clock framework */ - spear6xx_clk_init(); } static void __init spear6xx_timer_init(void) @@ -429,6 +426,8 @@ static void __init spear6xx_timer_init(void) char pclk_name[] = "pll3_48m_clk"; struct clk *gpt_clk, *pclk; + spear6xx_clk_init(); + /* get the system timer clock */ gpt_clk = clk_get_sys("gpt0", NULL); if (IS_ERR(gpt_clk)) { diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 880d02ec89d4..ef7099eea0f2 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -17,6 +17,7 @@ config UX500_SOC_DB5500 config UX500_SOC_DB8500 bool select MFD_DB8500_PRCMU + select REGULATOR select REGULATOR_DB8500_PRCMU select CPU_FREQ_TABLE if CPU_FREQ diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index d2058ef8345f..eff5842f6232 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -99,7 +99,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) */ write_pen_release(cpu_logical_map(cpu)); - gic_raise_softirq(cpumask_of(cpu), 1); + smp_send_reschedule(cpu); timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 8070145ccb98..3f26db4ee8e6 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -305,6 +305,7 @@ struct omap_hwmod_sysc_fields { * @rev_offs: IP block revision register offset (from module base addr) * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr) * @syss_offs: OCP_SYSSTATUS register offset (from module base addr) + * @srst_udelay: Delay needed after doing a softreset in usecs * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART} * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported * @clockact: the default value of the module CLOCKACTIVITY bits @@ -330,9 +331,10 @@ struct omap_hwmod_class_sysconfig { u16 sysc_offs; u16 syss_offs; u16 sysc_flags; + struct omap_hwmod_sysc_fields *sysc_fields; + u8 srst_udelay; u8 idlemodes; u8 clockact; - struct omap_hwmod_sysc_fields *sysc_fields; }; /** diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index eec98afa0f83..f9a8c5341ee9 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -348,7 +348,6 @@ u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc, sdrc_actim_ctrl_b_1, sdrc_mr_1); } -#ifdef CONFIG_PM void omap3_sram_restore_context(void) { omap_sram_ceil = omap_sram_base + omap_sram_size; @@ -358,17 +357,18 @@ void omap3_sram_restore_context(void) omap3_sram_configure_core_dpll_sz); omap_push_sram_idle(); } -#endif /* CONFIG_PM */ - -#endif /* CONFIG_ARCH_OMAP3 */ static inline int omap34xx_sram_init(void) { -#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) omap3_sram_restore_context(); -#endif return 0; } +#else +static inline int omap34xx_sram_init(void) +{ + return 0; +} +#endif /* CONFIG_ARCH_OMAP3 */ static inline int am33xx_sram_init(void) { diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig index 6c066fcb2979..387655b5ce05 100644 --- a/arch/arm/plat-spear/Kconfig +++ b/arch/arm/plat-spear/Kconfig @@ -13,6 +13,7 @@ config ARCH_SPEAR3XX select ARM_VIC select CPU_ARM926T select USE_OF + select PINCTRL help Supports for ARM's SPEAR3XX family diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile index 4af6258d0fee..38f1235f4632 100644 --- a/arch/arm/plat-spear/Makefile +++ b/arch/arm/plat-spear/Makefile @@ -3,6 +3,6 @@ # # Common support -obj-y := clock.o restart.o time.o pl080.o +obj-y := restart.o time.o pl080.o -obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o padmux.o +obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o diff --git a/arch/arm/plat-spear/clock.c b/arch/arm/plat-spear/clock.c deleted file mode 100644 index 67dd00381ea6..000000000000 --- a/arch/arm/plat-spear/clock.c +++ /dev/null @@ -1,1005 +0,0 @@ -/* - * arch/arm/plat-spear/clock.c - * - * Clock framework for SPEAr platform - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/bug.h> -#include <linux/clk.h> -#include <linux/debugfs.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/list.h> -#include <linux/module.h> -#include <linux/spinlock.h> -#include <plat/clock.h> - -static DEFINE_SPINLOCK(clocks_lock); -static LIST_HEAD(root_clks); -#ifdef CONFIG_DEBUG_FS -static LIST_HEAD(clocks); -#endif - -static void propagate_rate(struct clk *, int on_init); -#ifdef CONFIG_DEBUG_FS -static int clk_debugfs_reparent(struct clk *); -#endif - -static int generic_clk_enable(struct clk *clk) -{ - unsigned int val; - - if (!clk->en_reg) - return -EFAULT; - - val = readl(clk->en_reg); - if (unlikely(clk->flags & RESET_TO_ENABLE)) - val &= ~(1 << clk->en_reg_bit); - else - val |= 1 << clk->en_reg_bit; - - writel(val, clk->en_reg); - - return 0; -} - -static void generic_clk_disable(struct clk *clk) -{ - unsigned int val; - - if (!clk->en_reg) - return; - - val = readl(clk->en_reg); - if (unlikely(clk->flags & RESET_TO_ENABLE)) - val |= 1 << clk->en_reg_bit; - else - val &= ~(1 << clk->en_reg_bit); - - writel(val, clk->en_reg); -} - -/* generic clk ops */ -static struct clkops generic_clkops = { - .enable = generic_clk_enable, - .disable = generic_clk_disable, -}; - -/* returns current programmed clocks clock info structure */ -static struct pclk_info *pclk_info_get(struct clk *clk) -{ - unsigned int val, i; - struct pclk_info *info = NULL; - - val = (readl(clk->pclk_sel->pclk_sel_reg) >> clk->pclk_sel_shift) - & clk->pclk_sel->pclk_sel_mask; - - for (i = 0; i < clk->pclk_sel->pclk_count; i++) { - if (clk->pclk_sel->pclk_info[i].pclk_val == val) - info = &clk->pclk_sel->pclk_info[i]; - } - - return info; -} - -/* - * Set Update pclk, and pclk_info of clk and add clock sibling node to current - * parents children list - */ -static void clk_reparent(struct clk *clk, struct pclk_info *pclk_info) -{ - unsigned long flags; - - spin_lock_irqsave(&clocks_lock, flags); - list_del(&clk->sibling); - list_add(&clk->sibling, &pclk_info->pclk->children); - - clk->pclk = pclk_info->pclk; - spin_unlock_irqrestore(&clocks_lock, flags); - -#ifdef CONFIG_DEBUG_FS - clk_debugfs_reparent(clk); -#endif -} - -static void do_clk_disable(struct clk *clk) -{ - if (!clk) - return; - - if (!clk->usage_count) { - WARN_ON(1); - return; - } - - clk->usage_count--; - - if (clk->usage_count == 0) { - /* - * Surely, there are no active childrens or direct users - * of this clock - */ - if (clk->pclk) - do_clk_disable(clk->pclk); - - if (clk->ops && clk->ops->disable) - clk->ops->disable(clk); - } -} - -static int do_clk_enable(struct clk *clk) -{ - int ret = 0; - - if (!clk) - return -EFAULT; - - if (clk->usage_count == 0) { - if (clk->pclk) { - ret = do_clk_enable(clk->pclk); - if (ret) - goto err; - } - if (clk->ops && clk->ops->enable) { - ret = clk->ops->enable(clk); - if (ret) { - if (clk->pclk) - do_clk_disable(clk->pclk); - goto err; - } - } - /* - * Since the clock is going to be used for the first - * time please reclac - */ - if (clk->recalc) { - ret = clk->recalc(clk); - if (ret) - goto err; - } - } - clk->usage_count++; -err: - return ret; -} - -/* - * clk_enable - inform the system when the clock source should be running. - * @clk: clock source - * - * If the clock can not be enabled/disabled, this should return success. - * - * Returns success (0) or negative errno. - */ -int clk_enable(struct clk *clk) -{ - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&clocks_lock, flags); - ret = do_clk_enable(clk); - spin_unlock_irqrestore(&clocks_lock, flags); - return ret; -} -EXPORT_SYMBOL(clk_enable); - -/* - * clk_disable - inform the system when the clock source is no longer required. - * @clk: clock source - * - * Inform the system that a clock source is no longer required by - * a driver and may be shut down. - * - * Implementation detail: if the clock source is shared between - * multiple drivers, clk_enable() calls must be balanced by the - * same number of clk_disable() calls for the clock source to be - * disabled. - */ -void clk_disable(struct clk *clk) -{ - unsigned long flags; - - spin_lock_irqsave(&clocks_lock, flags); - do_clk_disable(clk); - spin_unlock_irqrestore(&clocks_lock, flags); -} -EXPORT_SYMBOL(clk_disable); - -/** - * clk_get_rate - obtain the current clock rate (in Hz) for a clock source. - * This is only valid once the clock source has been enabled. - * @clk: clock source - */ -unsigned long clk_get_rate(struct clk *clk) -{ - unsigned long flags, rate; - - spin_lock_irqsave(&clocks_lock, flags); - rate = clk->rate; - spin_unlock_irqrestore(&clocks_lock, flags); - - return rate; -} -EXPORT_SYMBOL(clk_get_rate); - -/** - * clk_set_parent - set the parent clock source for this clock - * @clk: clock source - * @parent: parent clock source - * - * Returns success (0) or negative errno. - */ -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - int i, found = 0, val = 0; - unsigned long flags; - - if (!clk || !parent) - return -EFAULT; - if (clk->pclk == parent) - return 0; - if (!clk->pclk_sel) - return -EPERM; - - /* check if requested parent is in clk parent list */ - for (i = 0; i < clk->pclk_sel->pclk_count; i++) { - if (clk->pclk_sel->pclk_info[i].pclk == parent) { - found = 1; - break; - } - } - - if (!found) - return -EINVAL; - - spin_lock_irqsave(&clocks_lock, flags); - /* reflect parent change in hardware */ - val = readl(clk->pclk_sel->pclk_sel_reg); - val &= ~(clk->pclk_sel->pclk_sel_mask << clk->pclk_sel_shift); - val |= clk->pclk_sel->pclk_info[i].pclk_val << clk->pclk_sel_shift; - writel(val, clk->pclk_sel->pclk_sel_reg); - spin_unlock_irqrestore(&clocks_lock, flags); - - /* reflect parent change in software */ - clk_reparent(clk, &clk->pclk_sel->pclk_info[i]); - - propagate_rate(clk, 0); - return 0; -} -EXPORT_SYMBOL(clk_set_parent); - -/** - * clk_set_rate - set the clock rate for a clock source - * @clk: clock source - * @rate: desired clock rate in Hz - * - * Returns success (0) or negative errno. - */ -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long flags; - int ret = -EINVAL; - - if (!clk || !rate) - return -EFAULT; - - if (clk->set_rate) { - spin_lock_irqsave(&clocks_lock, flags); - ret = clk->set_rate(clk, rate); - if (!ret) - /* if successful -> propagate */ - propagate_rate(clk, 0); - spin_unlock_irqrestore(&clocks_lock, flags); - } else if (clk->pclk) { - u32 mult = clk->div_factor ? clk->div_factor : 1; - ret = clk_set_rate(clk->pclk, mult * rate); - } - - return ret; -} -EXPORT_SYMBOL(clk_set_rate); - -/* registers clock in platform clock framework */ -void clk_register(struct clk_lookup *cl) -{ - struct clk *clk; - unsigned long flags; - - if (!cl || !cl->clk) - return; - clk = cl->clk; - - spin_lock_irqsave(&clocks_lock, flags); - - INIT_LIST_HEAD(&clk->children); - if (clk->flags & ALWAYS_ENABLED) - clk->ops = NULL; - else if (!clk->ops) - clk->ops = &generic_clkops; - - /* root clock don't have any parents */ - if (!clk->pclk && !clk->pclk_sel) { - list_add(&clk->sibling, &root_clks); - } else if (clk->pclk && !clk->pclk_sel) { - /* add clocks with only one parent to parent's children list */ - list_add(&clk->sibling, &clk->pclk->children); - } else { - /* clocks with more than one parent */ - struct pclk_info *pclk_info; - - pclk_info = pclk_info_get(clk); - if (!pclk_info) { - pr_err("CLKDEV: invalid pclk info of clk with" - " %s dev_id and %s con_id\n", - cl->dev_id, cl->con_id); - } else { - clk->pclk = pclk_info->pclk; - list_add(&clk->sibling, &pclk_info->pclk->children); - } - } - - spin_unlock_irqrestore(&clocks_lock, flags); - - /* debugfs specific */ -#ifdef CONFIG_DEBUG_FS - list_add(&clk->node, &clocks); - clk->cl = cl; -#endif - - /* add clock to arm clockdev framework */ - clkdev_add(cl); -} - -/** - * propagate_rate - recalculate and propagate all clocks to children - * @pclk: parent clock required to be propogated - * @on_init: flag for enabling clocks which are ENABLED_ON_INIT. - * - * Recalculates all children clocks - */ -void propagate_rate(struct clk *pclk, int on_init) -{ - struct clk *clk, *_temp; - int ret = 0; - - list_for_each_entry_safe(clk, _temp, &pclk->children, sibling) { - if (clk->recalc) { - ret = clk->recalc(clk); - /* - * recalc will return error if clk out is not programmed - * In this case configure default rate. - */ - if (ret && clk->set_rate) - clk->set_rate(clk, 0); - } - propagate_rate(clk, on_init); - - if (!on_init) - continue; - - /* Enable clks enabled on init, in software view */ - if (clk->flags & ENABLED_ON_INIT) - do_clk_enable(clk); - } -} - -/** - * round_rate_index - return closest programmable rate index in rate_config tbl - * @clk: ptr to clock structure - * @drate: desired rate - * @rate: final rate will be returned in this variable only. - * - * Finds index in rate_config for highest clk rate which is less than - * requested rate. If there is no clk rate lesser than requested rate then - * -EINVAL is returned. This routine assumes that rate_config is written - * in incrementing order of clk rates. - * If drate passed is zero then default rate is programmed. - */ -static int -round_rate_index(struct clk *clk, unsigned long drate, unsigned long *rate) -{ - unsigned long tmp = 0, prev_rate = 0; - int index; - - if (!clk->calc_rate) - return -EFAULT; - - if (!drate) - return -EINVAL; - - /* - * This loops ends on two conditions: - * - as soon as clk is found with rate greater than requested rate. - * - if all clks in rate_config are smaller than requested rate. - */ - for (index = 0; index < clk->rate_config.count; index++) { - prev_rate = tmp; - tmp = clk->calc_rate(clk, index); - if (drate < tmp) { - index--; - break; - } - } - /* return if can't find suitable clock */ - if (index < 0) { - index = -EINVAL; - *rate = 0; - } else if (index == clk->rate_config.count) { - /* program with highest clk rate possible */ - index = clk->rate_config.count - 1; - *rate = tmp; - } else - *rate = prev_rate; - - return index; -} - -/** - * clk_round_rate - adjust a rate to the exact rate a clock can provide - * @clk: clock source - * @rate: desired clock rate in Hz - * - * Returns rounded clock rate in Hz, or negative errno. - */ -long clk_round_rate(struct clk *clk, unsigned long drate) -{ - long rate = 0; - int index; - - /* - * propagate call to parent who supports calc_rate. Similar approach is - * used in clk_set_rate. - */ - if (!clk->calc_rate) { - u32 mult; - if (!clk->pclk) - return clk->rate; - - mult = clk->div_factor ? clk->div_factor : 1; - return clk_round_rate(clk->pclk, mult * drate) / mult; - } - - index = round_rate_index(clk, drate, &rate); - if (index >= 0) - return rate; - else - return index; -} -EXPORT_SYMBOL(clk_round_rate); - -/*All below functions are called with lock held */ - -/* - * Calculates pll clk rate for specific value of mode, m, n and p - * - * In normal mode - * rate = (2 * M[15:8] * Fin)/(N * 2^P) - * - * In Dithered mode - * rate = (2 * M[15:0] * Fin)/(256 * N * 2^P) - */ -unsigned long pll_calc_rate(struct clk *clk, int index) -{ - unsigned long rate = clk->pclk->rate; - struct pll_rate_tbl *tbls = clk->rate_config.tbls; - unsigned int mode; - - mode = tbls[index].mode ? 256 : 1; - return (((2 * rate / 10000) * tbls[index].m) / - (mode * tbls[index].n * (1 << tbls[index].p))) * 10000; -} - -/* - * calculates current programmed rate of pll1 - * - * In normal mode - * rate = (2 * M[15:8] * Fin)/(N * 2^P) - * - * In Dithered mode - * rate = (2 * M[15:0] * Fin)/(256 * N * 2^P) - */ -int pll_clk_recalc(struct clk *clk) -{ - struct pll_clk_config *config = clk->private_data; - unsigned int num = 2, den = 0, val, mode = 0; - - mode = (readl(config->mode_reg) >> config->masks->mode_shift) & - config->masks->mode_mask; - - val = readl(config->cfg_reg); - /* calculate denominator */ - den = (val >> config->masks->div_p_shift) & config->masks->div_p_mask; - den = 1 << den; - den *= (val >> config->masks->div_n_shift) & config->masks->div_n_mask; - - /* calculate numerator & denominator */ - if (!mode) { - /* Normal mode */ - num *= (val >> config->masks->norm_fdbk_m_shift) & - config->masks->norm_fdbk_m_mask; - } else { - /* Dithered mode */ - num *= (val >> config->masks->dith_fdbk_m_shift) & - config->masks->dith_fdbk_m_mask; - den *= 256; - } - - if (!den) - return -EINVAL; - - clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000; - return 0; -} - -/* - * Configures new clock rate of pll - */ -int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate) -{ - struct pll_rate_tbl *tbls = clk->rate_config.tbls; - struct pll_clk_config *config = clk->private_data; - unsigned long val, rate; - int i; - - i = round_rate_index(clk, desired_rate, &rate); - if (i < 0) - return i; - - val = readl(config->mode_reg) & - ~(config->masks->mode_mask << config->masks->mode_shift); - val |= (tbls[i].mode & config->masks->mode_mask) << - config->masks->mode_shift; - writel(val, config->mode_reg); - - val = readl(config->cfg_reg) & - ~(config->masks->div_p_mask << config->masks->div_p_shift); - val |= (tbls[i].p & config->masks->div_p_mask) << - config->masks->div_p_shift; - val &= ~(config->masks->div_n_mask << config->masks->div_n_shift); - val |= (tbls[i].n & config->masks->div_n_mask) << - config->masks->div_n_shift; - val &= ~(config->masks->dith_fdbk_m_mask << - config->masks->dith_fdbk_m_shift); - if (tbls[i].mode) - val |= (tbls[i].m & config->masks->dith_fdbk_m_mask) << - config->masks->dith_fdbk_m_shift; - else - val |= (tbls[i].m & config->masks->norm_fdbk_m_mask) << - config->masks->norm_fdbk_m_shift; - - writel(val, config->cfg_reg); - - clk->rate = rate; - - return 0; -} - -/* - * Calculates ahb, apb clk rate for specific value of div - */ -unsigned long bus_calc_rate(struct clk *clk, int index) -{ - unsigned long rate = clk->pclk->rate; - struct bus_rate_tbl *tbls = clk->rate_config.tbls; - - return rate / (tbls[index].div + 1); -} - -/* calculates current programmed rate of ahb or apb bus */ -int bus_clk_recalc(struct clk *clk) -{ - struct bus_clk_config *config = clk->private_data; - unsigned int div; - - div = ((readl(config->reg) >> config->masks->shift) & - config->masks->mask) + 1; - - if (!div) - return -EINVAL; - - clk->rate = (unsigned long)clk->pclk->rate / div; - return 0; -} - -/* Configures new clock rate of AHB OR APB bus */ -int bus_clk_set_rate(struct clk *clk, unsigned long desired_rate) -{ - struct bus_rate_tbl *tbls = clk->rate_config.tbls; - struct bus_clk_config *config = clk->private_data; - unsigned long val, rate; - int i; - - i = round_rate_index(clk, desired_rate, &rate); - if (i < 0) - return i; - - val = readl(config->reg) & - ~(config->masks->mask << config->masks->shift); - val |= (tbls[i].div & config->masks->mask) << config->masks->shift; - writel(val, config->reg); - - clk->rate = rate; - - return 0; -} - -/* - * gives rate for different values of eq, x and y - * - * Fout from synthesizer can be given from two equations: - * Fout1 = (Fin * X/Y)/2 EQ1 - * Fout2 = Fin * X/Y EQ2 - */ -unsigned long aux_calc_rate(struct clk *clk, int index) -{ - unsigned long rate = clk->pclk->rate; - struct aux_rate_tbl *tbls = clk->rate_config.tbls; - u8 eq = tbls[index].eq ? 1 : 2; - - return (((rate/10000) * tbls[index].xscale) / - (tbls[index].yscale * eq)) * 10000; -} - -/* - * calculates current programmed rate of auxiliary synthesizers - * used by: UART, FIRDA - * - * Fout from synthesizer can be given from two equations: - * Fout1 = (Fin * X/Y)/2 - * Fout2 = Fin * X/Y - * - * Selection of eqn 1 or 2 is programmed in register - */ -int aux_clk_recalc(struct clk *clk) -{ - struct aux_clk_config *config = clk->private_data; - unsigned int num = 1, den = 1, val, eqn; - - val = readl(config->synth_reg); - - eqn = (val >> config->masks->eq_sel_shift) & - config->masks->eq_sel_mask; - if (eqn == config->masks->eq1_mask) - den *= 2; - - /* calculate numerator */ - num = (val >> config->masks->xscale_sel_shift) & - config->masks->xscale_sel_mask; - - /* calculate denominator */ - den *= (val >> config->masks->yscale_sel_shift) & - config->masks->yscale_sel_mask; - - if (!den) - return -EINVAL; - - clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000; - return 0; -} - -/* Configures new clock rate of auxiliary synthesizers used by: UART, FIRDA*/ -int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate) -{ - struct aux_rate_tbl *tbls = clk->rate_config.tbls; - struct aux_clk_config *config = clk->private_data; - unsigned long val, rate; - int i; - - i = round_rate_index(clk, desired_rate, &rate); - if (i < 0) - return i; - - val = readl(config->synth_reg) & - ~(config->masks->eq_sel_mask << config->masks->eq_sel_shift); - val |= (tbls[i].eq & config->masks->eq_sel_mask) << - config->masks->eq_sel_shift; - val &= ~(config->masks->xscale_sel_mask << - config->masks->xscale_sel_shift); - val |= (tbls[i].xscale & config->masks->xscale_sel_mask) << - config->masks->xscale_sel_shift; - val &= ~(config->masks->yscale_sel_mask << - config->masks->yscale_sel_shift); - val |= (tbls[i].yscale & config->masks->yscale_sel_mask) << - config->masks->yscale_sel_shift; - writel(val, config->synth_reg); - - clk->rate = rate; - - return 0; -} - -/* - * Calculates gpt clk rate for different values of mscale and nscale - * - * Fout= Fin/((2 ^ (N+1)) * (M+1)) - */ -unsigned long gpt_calc_rate(struct clk *clk, int index) -{ - unsigned long rate = clk->pclk->rate; - struct gpt_rate_tbl *tbls = clk->rate_config.tbls; - - return rate / ((1 << (tbls[index].nscale + 1)) * - (tbls[index].mscale + 1)); -} - -/* - * calculates current programmed rate of gpt synthesizers - * Fout from synthesizer can be given from below equations: - * Fout= Fin/((2 ^ (N+1)) * (M+1)) - */ -int gpt_clk_recalc(struct clk *clk) -{ - struct gpt_clk_config *config = clk->private_data; - unsigned int div = 1, val; - - val = readl(config->synth_reg); - div += (val >> config->masks->mscale_sel_shift) & - config->masks->mscale_sel_mask; - div *= 1 << (((val >> config->masks->nscale_sel_shift) & - config->masks->nscale_sel_mask) + 1); - - if (!div) - return -EINVAL; - - clk->rate = (unsigned long)clk->pclk->rate / div; - return 0; -} - -/* Configures new clock rate of gptiliary synthesizers used by: UART, FIRDA*/ -int gpt_clk_set_rate(struct clk *clk, unsigned long desired_rate) -{ - struct gpt_rate_tbl *tbls = clk->rate_config.tbls; - struct gpt_clk_config *config = clk->private_data; - unsigned long val, rate; - int i; - - i = round_rate_index(clk, desired_rate, &rate); - if (i < 0) - return i; - - val = readl(config->synth_reg) & ~(config->masks->mscale_sel_mask << - config->masks->mscale_sel_shift); - val |= (tbls[i].mscale & config->masks->mscale_sel_mask) << - config->masks->mscale_sel_shift; - val &= ~(config->masks->nscale_sel_mask << - config->masks->nscale_sel_shift); - val |= (tbls[i].nscale & config->masks->nscale_sel_mask) << - config->masks->nscale_sel_shift; - writel(val, config->synth_reg); - - clk->rate = rate; - - return 0; -} - -/* - * Calculates clcd clk rate for different values of div - * - * Fout from synthesizer can be given from below equation: - * Fout= Fin/2*div (division factor) - * div is 17 bits:- - * 0-13 (fractional part) - * 14-16 (integer part) - * To calculate Fout we left shift val by 14 bits and divide Fin by - * complete div (including fractional part) and then right shift the - * result by 14 places. - */ -unsigned long clcd_calc_rate(struct clk *clk, int index) -{ - unsigned long rate = clk->pclk->rate; - struct clcd_rate_tbl *tbls = clk->rate_config.tbls; - - rate /= 1000; - rate <<= 12; - rate /= (2 * tbls[index].div); - rate >>= 12; - rate *= 1000; - - return rate; -} - -/* - * calculates current programmed rate of clcd synthesizer - * Fout from synthesizer can be given from below equation: - * Fout= Fin/2*div (division factor) - * div is 17 bits:- - * 0-13 (fractional part) - * 14-16 (integer part) - * To calculate Fout we left shift val by 14 bits and divide Fin by - * complete div (including fractional part) and then right shift the - * result by 14 places. - */ -int clcd_clk_recalc(struct clk *clk) -{ - struct clcd_clk_config *config = clk->private_data; - unsigned int div = 1; - unsigned long prate; - unsigned int val; - - val = readl(config->synth_reg); - div = (val >> config->masks->div_factor_shift) & - config->masks->div_factor_mask; - - if (!div) - return -EINVAL; - - prate = clk->pclk->rate / 1000; /* first level division, make it KHz */ - - clk->rate = (((unsigned long)prate << 12) / (2 * div)) >> 12; - clk->rate *= 1000; - return 0; -} - -/* Configures new clock rate of auxiliary synthesizers used by: UART, FIRDA*/ -int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate) -{ - struct clcd_rate_tbl *tbls = clk->rate_config.tbls; - struct clcd_clk_config *config = clk->private_data; - unsigned long val, rate; - int i; - - i = round_rate_index(clk, desired_rate, &rate); - if (i < 0) - return i; - - val = readl(config->synth_reg) & ~(config->masks->div_factor_mask << - config->masks->div_factor_shift); - val |= (tbls[i].div & config->masks->div_factor_mask) << - config->masks->div_factor_shift; - writel(val, config->synth_reg); - - clk->rate = rate; - - return 0; -} - -/* - * Used for clocks that always have value as the parent clock divided by a - * fixed divisor - */ -int follow_parent(struct clk *clk) -{ - unsigned int div_factor = (clk->div_factor < 1) ? 1 : clk->div_factor; - - clk->rate = clk->pclk->rate/div_factor; - return 0; -} - -/** - * recalc_root_clocks - recalculate and propagate all root clocks - * - * Recalculates all root clocks (clocks with no parent), which if the - * clock's .recalc is set correctly, should also propagate their rates. - */ -void recalc_root_clocks(void) -{ - struct clk *pclk; - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&clocks_lock, flags); - list_for_each_entry(pclk, &root_clks, sibling) { - if (pclk->recalc) { - ret = pclk->recalc(pclk); - /* - * recalc will return error if clk out is not programmed - * In this case configure default clock. - */ - if (ret && pclk->set_rate) - pclk->set_rate(pclk, 0); - } - propagate_rate(pclk, 1); - /* Enable clks enabled on init, in software view */ - if (pclk->flags & ENABLED_ON_INIT) - do_clk_enable(pclk); - } - spin_unlock_irqrestore(&clocks_lock, flags); -} - -void __init clk_init(void) -{ - recalc_root_clocks(); -} - -#ifdef CONFIG_DEBUG_FS -/* - * debugfs support to trace clock tree hierarchy and attributes - */ -static struct dentry *clk_debugfs_root; -static int clk_debugfs_register_one(struct clk *c) -{ - int err; - struct dentry *d; - struct clk *pa = c->pclk; - char s[255]; - char *p = s; - - if (c) { - if (c->cl->con_id) - p += sprintf(p, "%s", c->cl->con_id); - if (c->cl->dev_id) - p += sprintf(p, "%s", c->cl->dev_id); - } - d = debugfs_create_dir(s, pa ? pa->dent : clk_debugfs_root); - if (!d) - return -ENOMEM; - c->dent = d; - - d = debugfs_create_u32("usage_count", S_IRUGO, c->dent, - (u32 *)&c->usage_count); - if (!d) { - err = -ENOMEM; - goto err_out; - } - d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate); - if (!d) { - err = -ENOMEM; - goto err_out; - } - d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags); - if (!d) { - err = -ENOMEM; - goto err_out; - } - return 0; - -err_out: - debugfs_remove_recursive(c->dent); - return err; -} - -static int clk_debugfs_register(struct clk *c) -{ - int err; - struct clk *pa = c->pclk; - - if (pa && !pa->dent) { - err = clk_debugfs_register(pa); - if (err) - return err; - } - - if (!c->dent) { - err = clk_debugfs_register_one(c); - if (err) - return err; - } - return 0; -} - -static int __init clk_debugfs_init(void) -{ - struct clk *c; - struct dentry *d; - int err; - - d = debugfs_create_dir("clock", NULL); - if (!d) - return -ENOMEM; - clk_debugfs_root = d; - - list_for_each_entry(c, &clocks, node) { - err = clk_debugfs_register(c); - if (err) - goto err_out; - } - return 0; -err_out: - debugfs_remove_recursive(clk_debugfs_root); - return err; -} -late_initcall(clk_debugfs_init); - -static int clk_debugfs_reparent(struct clk *c) -{ - debugfs_remove(c->dent); - return clk_debugfs_register_one(c); -} -#endif /* CONFIG_DEBUG_FS */ diff --git a/arch/arm/plat-spear/include/plat/clock.h b/arch/arm/plat-spear/include/plat/clock.h deleted file mode 100644 index 0062bafef12d..000000000000 --- a/arch/arm/plat-spear/include/plat/clock.h +++ /dev/null @@ -1,249 +0,0 @@ -/* - * arch/arm/plat-spear/include/plat/clock.h - * - * Clock framework definitions for SPEAr platform - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __PLAT_CLOCK_H -#define __PLAT_CLOCK_H - -#include <linux/list.h> -#include <linux/clkdev.h> -#include <linux/types.h> - -/* clk structure flags */ -#define ALWAYS_ENABLED (1 << 0) /* clock always enabled */ -#define RESET_TO_ENABLE (1 << 1) /* reset register bit to enable clk */ -#define ENABLED_ON_INIT (1 << 2) /* clocks enabled at init */ - -/** - * struct clkops - clock operations - * @enable: pointer to clock enable function - * @disable: pointer to clock disable function - */ -struct clkops { - int (*enable) (struct clk *); - void (*disable) (struct clk *); -}; - -/** - * struct pclk_info - parents info - * @pclk: pointer to parent clk - * @pclk_val: value to be written for selecting this parent - */ -struct pclk_info { - struct clk *pclk; - u8 pclk_val; -}; - -/** - * struct pclk_sel - parents selection configuration - * @pclk_info: pointer to array of parent clock info - * @pclk_count: number of parents - * @pclk_sel_reg: register for selecting a parent - * @pclk_sel_mask: mask for selecting parent (can be used to clear bits also) - */ -struct pclk_sel { - struct pclk_info *pclk_info; - u8 pclk_count; - void __iomem *pclk_sel_reg; - unsigned int pclk_sel_mask; -}; - -/** - * struct rate_config - clk rate configurations - * @tbls: array of device specific clk rate tables, in ascending order of rates - * @count: size of tbls array - * @default_index: default setting when originally disabled - */ -struct rate_config { - void *tbls; - u8 count; - u8 default_index; -}; - -/** - * struct clk - clock structure - * @usage_count: num of users who enabled this clock - * @flags: flags for clock properties - * @rate: programmed clock rate in Hz - * @en_reg: clk enable/disable reg - * @en_reg_bit: clk enable/disable bit - * @ops: clk enable/disable ops - generic_clkops selected if NULL - * @recalc: pointer to clock rate recalculate function - * @set_rate: pointer to clock set rate function - * @calc_rate: pointer to clock get rate function for index - * @rate_config: rate configuration information, used by set_rate - * @div_factor: division factor to parent clock. - * @pclk: current parent clk - * @pclk_sel: pointer to parent selection structure - * @pclk_sel_shift: register shift for selecting parent of this clock - * @children: list for childrens or this clock - * @sibling: node for list of clocks having same parents - * @private_data: clock specific private data - * @node: list to maintain clocks linearly - * @cl: clocklook up associated with this clock - * @dent: object for debugfs - */ -struct clk { - unsigned int usage_count; - unsigned int flags; - unsigned long rate; - void __iomem *en_reg; - u8 en_reg_bit; - const struct clkops *ops; - int (*recalc) (struct clk *); - int (*set_rate) (struct clk *, unsigned long rate); - unsigned long (*calc_rate)(struct clk *, int index); - struct rate_config rate_config; - unsigned int div_factor; - - struct clk *pclk; - struct pclk_sel *pclk_sel; - unsigned int pclk_sel_shift; - - struct list_head children; - struct list_head sibling; - void *private_data; -#ifdef CONFIG_DEBUG_FS - struct list_head node; - struct clk_lookup *cl; - struct dentry *dent; -#endif -}; - -/* pll configuration structure */ -struct pll_clk_masks { - u32 mode_mask; - u32 mode_shift; - - u32 norm_fdbk_m_mask; - u32 norm_fdbk_m_shift; - u32 dith_fdbk_m_mask; - u32 dith_fdbk_m_shift; - u32 div_p_mask; - u32 div_p_shift; - u32 div_n_mask; - u32 div_n_shift; -}; - -struct pll_clk_config { - void __iomem *mode_reg; - void __iomem *cfg_reg; - struct pll_clk_masks *masks; -}; - -/* pll clk rate config structure */ -struct pll_rate_tbl { - u8 mode; - u16 m; - u8 n; - u8 p; -}; - -/* ahb and apb bus configuration structure */ -struct bus_clk_masks { - u32 mask; - u32 shift; -}; - -struct bus_clk_config { - void __iomem *reg; - struct bus_clk_masks *masks; -}; - -/* ahb and apb clk bus rate config structure */ -struct bus_rate_tbl { - u8 div; -}; - -/* Aux clk configuration structure: applicable to UART and FIRDA */ -struct aux_clk_masks { - u32 eq_sel_mask; - u32 eq_sel_shift; - u32 eq1_mask; - u32 eq2_mask; - u32 xscale_sel_mask; - u32 xscale_sel_shift; - u32 yscale_sel_mask; - u32 yscale_sel_shift; -}; - -struct aux_clk_config { - void __iomem *synth_reg; - struct aux_clk_masks *masks; -}; - -/* aux clk rate config structure */ -struct aux_rate_tbl { - u16 xscale; - u16 yscale; - u8 eq; -}; - -/* GPT clk configuration structure */ -struct gpt_clk_masks { - u32 mscale_sel_mask; - u32 mscale_sel_shift; - u32 nscale_sel_mask; - u32 nscale_sel_shift; -}; - -struct gpt_clk_config { - void __iomem *synth_reg; - struct gpt_clk_masks *masks; -}; - -/* gpt clk rate config structure */ -struct gpt_rate_tbl { - u16 mscale; - u16 nscale; -}; - -/* clcd clk configuration structure */ -struct clcd_synth_masks { - u32 div_factor_mask; - u32 div_factor_shift; -}; - -struct clcd_clk_config { - void __iomem *synth_reg; - struct clcd_synth_masks *masks; -}; - -/* clcd clk rate config structure */ -struct clcd_rate_tbl { - u16 div; -}; - -/* platform specific clock functions */ -void __init clk_init(void); -void clk_register(struct clk_lookup *cl); -void recalc_root_clocks(void); - -/* clock recalc & set rate functions */ -int follow_parent(struct clk *clk); -unsigned long pll_calc_rate(struct clk *clk, int index); -int pll_clk_recalc(struct clk *clk); -int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate); -unsigned long bus_calc_rate(struct clk *clk, int index); -int bus_clk_recalc(struct clk *clk); -int bus_clk_set_rate(struct clk *clk, unsigned long desired_rate); -unsigned long gpt_calc_rate(struct clk *clk, int index); -int gpt_clk_recalc(struct clk *clk); -int gpt_clk_set_rate(struct clk *clk, unsigned long desired_rate); -unsigned long aux_calc_rate(struct clk *clk, int index); -int aux_clk_recalc(struct clk *clk); -int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate); -unsigned long clcd_calc_rate(struct clk *clk, int index); -int clcd_clk_recalc(struct clk *clk); -int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate); - -#endif /* __PLAT_CLOCK_H */ diff --git a/arch/arm/plat-spear/include/plat/padmux.h b/arch/arm/plat-spear/include/plat/padmux.h deleted file mode 100644 index 877f3adcf610..000000000000 --- a/arch/arm/plat-spear/include/plat/padmux.h +++ /dev/null @@ -1,92 +0,0 @@ -/* - * arch/arm/plat-spear/include/plat/padmux.h - * - * SPEAr platform specific gpio pads muxing file - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __PLAT_PADMUX_H -#define __PLAT_PADMUX_H - -#include <linux/types.h> - -/* - * struct pmx_reg: configuration structure for mode reg and mux reg - * - * offset: offset of mode reg - * mask: mask of mode reg - */ -struct pmx_reg { - u32 offset; - u32 mask; -}; - -/* - * struct pmx_dev_mode: configuration structure every group of modes of a device - * - * ids: all modes for this configuration - * mask: mask for supported mode - */ -struct pmx_dev_mode { - u32 ids; - u32 mask; -}; - -/* - * struct pmx_mode: mode definition structure - * - * name: mode name - * mask: mode mask - */ -struct pmx_mode { - char *name; - u32 id; - u32 mask; -}; - -/* - * struct pmx_dev: device definition structure - * - * name: device name - * modes: device configuration array for different modes supported - * mode_count: size of modes array - * is_active: is peripheral active/enabled - * enb_on_reset: if 1, mask bits to be cleared in reg otherwise to be set in reg - */ -struct pmx_dev { - char *name; - struct pmx_dev_mode *modes; - u8 mode_count; - bool is_active; - bool enb_on_reset; -}; - -/* - * struct pmx_driver: driver definition structure - * - * mode: mode to be set - * devs: array of pointer to pmx devices - * devs_count: ARRAY_SIZE of devs - * base: base address of soc config registers - * mode_reg: structure of mode config register - * mux_reg: structure of device mux config register - */ -struct pmx_driver { - struct pmx_mode *mode; - struct pmx_dev **devs; - u8 devs_count; - u32 *base; - struct pmx_reg mode_reg; - struct pmx_reg mux_reg; -}; - -/* pmx functions */ -int pmx_register(struct pmx_driver *driver); - -#endif /* __PLAT_PADMUX_H */ diff --git a/arch/arm/plat-spear/padmux.c b/arch/arm/plat-spear/padmux.c deleted file mode 100644 index 555eec6dc1cb..000000000000 --- a/arch/arm/plat-spear/padmux.c +++ /dev/null @@ -1,164 +0,0 @@ -/* - * arch/arm/plat-spear/include/plat/padmux.c - * - * SPEAr platform specific gpio pads muxing source file - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/err.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <plat/padmux.h> - -/* - * struct pmx: pmx definition structure - * - * base: base address of configuration registers - * mode_reg: mode configurations - * mux_reg: muxing configurations - * active_mode: pointer to current active mode - */ -struct pmx { - u32 base; - struct pmx_reg mode_reg; - struct pmx_reg mux_reg; - struct pmx_mode *active_mode; -}; - -static struct pmx *pmx; - -/** - * pmx_mode_set - Enables an multiplexing mode - * @mode - pointer to pmx mode - * - * It will set mode of operation in hardware. - * Returns -ve on Err otherwise 0 - */ -static int pmx_mode_set(struct pmx_mode *mode) -{ - u32 val; - - if (!mode->name) - return -EFAULT; - - pmx->active_mode = mode; - - val = readl(pmx->base + pmx->mode_reg.offset); - val &= ~pmx->mode_reg.mask; - val |= mode->mask & pmx->mode_reg.mask; - writel(val, pmx->base + pmx->mode_reg.offset); - - return 0; -} - -/** - * pmx_devs_enable - Enables list of devices - * @devs - pointer to pmx device array - * @count - number of devices to enable - * - * It will enable pads for all required peripherals once and only once. - * If peripheral is not supported by current mode then request is rejected. - * Conflicts between peripherals are not handled and peripherals will be - * enabled in the order they are present in pmx_dev array. - * In case of conflicts last peripheral enabled will be present. - * Returns -ve on Err otherwise 0 - */ -static int pmx_devs_enable(struct pmx_dev **devs, u8 count) -{ - u32 val, i, mask; - - if (!count) - return -EINVAL; - - val = readl(pmx->base + pmx->mux_reg.offset); - for (i = 0; i < count; i++) { - u8 j = 0; - - if (!devs[i]->name || !devs[i]->modes) { - printk(KERN_ERR "padmux: dev name or modes is null\n"); - continue; - } - /* check if peripheral exists in active mode */ - if (pmx->active_mode) { - bool found = false; - for (j = 0; j < devs[i]->mode_count; j++) { - if (devs[i]->modes[j].ids & - pmx->active_mode->id) { - found = true; - break; - } - } - if (found == false) { - printk(KERN_ERR "%s device not available in %s"\ - "mode\n", devs[i]->name, - pmx->active_mode->name); - continue; - } - } - - /* enable peripheral */ - mask = devs[i]->modes[j].mask & pmx->mux_reg.mask; - if (devs[i]->enb_on_reset) - val &= ~mask; - else - val |= mask; - - devs[i]->is_active = true; - } - writel(val, pmx->base + pmx->mux_reg.offset); - kfree(pmx); - - /* this will ensure that multiplexing can't be changed now */ - pmx = (struct pmx *)-1; - - return 0; -} - -/** - * pmx_register - registers a platform requesting pad mux feature - * @driver - pointer to driver structure containing driver specific parameters - * - * Also this must be called only once. This will allocate memory for pmx - * structure, will call pmx_mode_set, will call pmx_devs_enable. - * Returns -ve on Err otherwise 0 - */ -int pmx_register(struct pmx_driver *driver) -{ - int ret = 0; - - if (pmx) - return -EPERM; - if (!driver->base || !driver->devs) - return -EFAULT; - - pmx = kzalloc(sizeof(*pmx), GFP_KERNEL); - if (!pmx) - return -ENOMEM; - - pmx->base = (u32)driver->base; - pmx->mode_reg.offset = driver->mode_reg.offset; - pmx->mode_reg.mask = driver->mode_reg.mask; - pmx->mux_reg.offset = driver->mux_reg.offset; - pmx->mux_reg.mask = driver->mux_reg.mask; - - /* choose mode to enable */ - if (driver->mode) { - ret = pmx_mode_set(driver->mode); - if (ret) - goto pmx_fail; - } - ret = pmx_devs_enable(driver->devs, driver->devs_count); - if (ret) - goto pmx_fail; - - return 0; - -pmx_fail: - return ret; -} diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c index 9a378987bbb1..03321af5de9f 100644 --- a/arch/arm/plat-spear/time.c +++ b/arch/arm/plat-spear/time.c @@ -233,10 +233,10 @@ void __init spear_setup_of_timer(void) goto err_iomap; } - ret = clk_enable(gpt_clk); + ret = clk_prepare_enable(gpt_clk); if (ret < 0) { - pr_err("%s:couldn't enable gpt clock\n", __func__); - goto err_clk; + pr_err("%s:couldn't prepare-enable gpt clock\n", __func__); + goto err_prepare_enable_clk; } spear_clockevent_init(irq); @@ -244,7 +244,7 @@ void __init spear_setup_of_timer(void) return; -err_clk: +err_prepare_enable_clk: clk_put(gpt_clk); err_iomap: iounmap(gpt_base); diff --git a/arch/ia64/include/asm/futex.h b/arch/ia64/include/asm/futex.h index 0ab82cc2dc8f..d2bf1fd5e44f 100644 --- a/arch/ia64/include/asm/futex.h +++ b/arch/ia64/include/asm/futex.h @@ -106,15 +106,16 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, return -EFAULT; { - register unsigned long r8 __asm ("r8") = 0; + register unsigned long r8 __asm ("r8"); unsigned long prev; __asm__ __volatile__( " mf;; \n" - " mov ar.ccv=%3;; \n" - "[1:] cmpxchg4.acq %0=[%1],%2,ar.ccv \n" + " mov %0=r0 \n" + " mov ar.ccv=%4;; \n" + "[1:] cmpxchg4.acq %1=[%2],%3,ar.ccv \n" " .xdata4 \"__ex_table\", 1b-., 2f-. \n" "[2:]" - : "=r" (prev) + : "=r" (r8), "=r" (prev) : "r" (uaddr), "r" (newval), "rO" ((long) (unsigned) oldval) : "memory"); diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 9d0fd7d5bb82..f00ba025375d 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -604,12 +604,6 @@ pfm_unprotect_ctx_ctxsw(pfm_context_t *x, unsigned long f) spin_unlock(&(x)->ctx_lock); } -static inline unsigned int -pfm_do_munmap(struct mm_struct *mm, unsigned long addr, size_t len, int acct) -{ - return do_munmap(mm, addr, len); -} - static inline unsigned long pfm_get_unmapped_area(struct file *file, unsigned long addr, unsigned long len, unsigned long pgoff, unsigned long flags, unsigned long exec) { @@ -1458,8 +1452,9 @@ pfm_unreserve_session(pfm_context_t *ctx, int is_syswide, unsigned int cpu) * a PROTECT_CTX() section. */ static int -pfm_remove_smpl_mapping(struct task_struct *task, void *vaddr, unsigned long size) +pfm_remove_smpl_mapping(void *vaddr, unsigned long size) { + struct task_struct *task = current; int r; /* sanity checks */ @@ -1473,13 +1468,8 @@ pfm_remove_smpl_mapping(struct task_struct *task, void *vaddr, unsigned long siz /* * does the actual unmapping */ - down_write(&task->mm->mmap_sem); + r = vm_munmap((unsigned long)vaddr, size); - DPRINT(("down_write done smpl_vaddr=%p size=%lu\n", vaddr, size)); - - r = pfm_do_munmap(task->mm, (unsigned long)vaddr, size, 0); - - up_write(&task->mm->mmap_sem); if (r !=0) { printk(KERN_ERR "perfmon: [%d] unable to unmap sampling buffer @%p size=%lu\n", task_pid_nr(task), vaddr, size); } @@ -1945,7 +1935,7 @@ pfm_flush(struct file *filp, fl_owner_t id) * because some VM function reenables interrupts. * */ - if (smpl_buf_vaddr) pfm_remove_smpl_mapping(current, smpl_buf_vaddr, smpl_buf_size); + if (smpl_buf_vaddr) pfm_remove_smpl_mapping(smpl_buf_vaddr, smpl_buf_size); return 0; } diff --git a/arch/m68k/configs/m5275evb_defconfig b/arch/m68k/configs/m5275evb_defconfig index 33c32aeca12b..a1230e82bb1e 100644 --- a/arch/m68k/configs/m5275evb_defconfig +++ b/arch/m68k/configs/m5275evb_defconfig @@ -49,7 +49,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_FEC=y -CONFIG_FEC2=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set CONFIG_PPP=y diff --git a/arch/m68k/platform/527x/config.c b/arch/m68k/platform/527x/config.c index 7ed848c3b848..f91a53294c35 100644 --- a/arch/m68k/platform/527x/config.c +++ b/arch/m68k/platform/527x/config.c @@ -74,9 +74,7 @@ static void __init m527x_fec_init(void) writew(par | 0xf00, MCF_IPSBAR + 0x100082); v = readb(MCF_IPSBAR + 0x100078); writeb(v | 0xc0, MCF_IPSBAR + 0x100078); -#endif -#ifdef CONFIG_FEC2 /* Set multi-function pins to ethernet mode for fec1 */ par = readw(MCF_IPSBAR + 0x100082); writew(par | 0xa0, MCF_IPSBAR + 0x100082); diff --git a/arch/m68k/platform/68EZ328/Makefile b/arch/m68k/platform/68EZ328/Makefile index ee97735a242c..b44d799b1115 100644 --- a/arch/m68k/platform/68EZ328/Makefile +++ b/arch/m68k/platform/68EZ328/Makefile @@ -3,9 +3,3 @@ # obj-y := config.o - -extra-y := bootlogo.rh - -$(obj)/bootlogo.rh: $(src)/bootlogo.h - perl $(src)/../68328/bootlogo.pl < $(src)/bootlogo.h \ - > $(obj)/bootlogo.rh diff --git a/arch/m68k/platform/68VZ328/Makefile b/arch/m68k/platform/68VZ328/Makefile index 447ffa0fd7c7..a49d75e65489 100644 --- a/arch/m68k/platform/68VZ328/Makefile +++ b/arch/m68k/platform/68VZ328/Makefile @@ -3,14 +3,9 @@ # obj-y := config.o -logo-$(UCDIMM) := bootlogo.rh -logo-$(DRAGEN2) := screen.h -extra-y := $(logo-y) - -$(obj)/bootlogo.rh: $(src)/../68EZ328/bootlogo.h - perl $(src)/bootlogo.pl < $(src)/../68328/bootlogo.h > $(obj)/bootlogo.rh +extra-$(DRAGEN2):= screen.h $(obj)/screen.h: $(src)/screen.xbm $(src)/xbm2lcd.pl perl $(src)/xbm2lcd.pl < $(src)/screen.xbm > $(obj)/screen.h -clean-files := $(obj)/screen.h $(obj)/bootlogo.rh +clean-files := $(obj)/screen.h diff --git a/arch/m68k/platform/68EZ328/bootlogo.h b/arch/m68k/platform/68VZ328/bootlogo.h index e842bdae5839..b38e2b255142 100644 --- a/arch/m68k/platform/68EZ328/bootlogo.h +++ b/arch/m68k/platform/68VZ328/bootlogo.h @@ -1,6 +1,6 @@ #define splash_width 640 #define splash_height 480 -static unsigned char splash_bits[] = { +unsigned char __attribute__ ((aligned(16))) bootlogo_bits[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, diff --git a/arch/m68k/platform/coldfire/device.c b/arch/m68k/platform/coldfire/device.c index fa50c48292ff..7af97362b95c 100644 --- a/arch/m68k/platform/coldfire/device.c +++ b/arch/m68k/platform/coldfire/device.c @@ -114,7 +114,7 @@ static struct resource mcf_fec1_resources[] = { static struct platform_device mcf_fec1 = { .name = "fec", - .id = 0, + .id = 1, .num_resources = ARRAY_SIZE(mcf_fec1_resources), .resource = mcf_fec1_resources, }; diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 2b7c0fbe578e..9015060919a0 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -90,7 +90,6 @@ config S390 select HAVE_KERNEL_XZ select HAVE_ARCH_MUTEX_CPU_RELAX select HAVE_ARCH_JUMP_LABEL if !MARCH_G5 - select HAVE_RCU_TABLE_FREE if SMP select ARCH_SAVE_PAGE_KEYS if HIBERNATION select HAVE_MEMBLOCK select HAVE_MEMBLOCK_NODE_MAP diff --git a/arch/s390/defconfig b/arch/s390/defconfig index 6cf8e26b3137..1957a9dd256d 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -1,8 +1,12 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y CONFIG_AUDIT=y -CONFIG_RCU_TRACE=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CGROUPS=y @@ -14,16 +18,22 @@ CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y CONFIG_CGROUP_SCHED=y CONFIG_RT_GROUP_SCHED=y CONFIG_BLK_CGROUP=y +CONFIG_NAMESPACES=y CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_XZ=y +CONFIG_RD_LZO=y +CONFIG_EXPERT=y # CONFIG_COMPAT_BRK is not set -CONFIG_SLAB=y CONFIG_PROFILING=y CONFIG_OPROFILE=y CONFIG_KPROBES=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_IBM_PARTITION=y CONFIG_DEFAULT_DEADLINE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -34,18 +44,15 @@ CONFIG_KSM=y CONFIG_BINFMT_MISC=m CONFIG_CMM=m CONFIG_HZ_100=y -CONFIG_KEXEC=y -CONFIG_PM=y +CONFIG_CRASH_DUMP=y CONFIG_HIBERNATION=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_NET_KEY=y -CONFIG_AFIUCV=m CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_INET_LRO is not set CONFIG_IPV6=y -CONFIG_NET_SCTPPROBE=m CONFIG_L2TP=m CONFIG_L2TP_DEBUGFS=m CONFIG_VLAN_8021Q=y @@ -84,15 +91,14 @@ CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y CONFIG_ZFCP=y -CONFIG_ZFCP_DIF=y CONFIG_NETDEVICES=y -CONFIG_DUMMY=m CONFIG_BONDING=m +CONFIG_DUMMY=m CONFIG_EQUALIZER=m CONFIG_TUN=m -CONFIG_NET_ETHERNET=y CONFIG_VIRTIO_NET=y CONFIG_RAW_DRIVER=m +CONFIG_VIRTIO_BALLOON=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set @@ -103,27 +109,21 @@ CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_NETWORK_FILESYSTEMS is not set -CONFIG_PARTITION_ADVANCED=y -CONFIG_IBM_PARTITION=y -CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y CONFIG_TIMER_STATS=y CONFIG_PROVE_LOCKING=y CONFIG_PROVE_RCU=y CONFIG_LOCK_STAT=y CONFIG_DEBUG_LOCKDEP=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y CONFIG_DEBUG_LIST=y CONFIG_DEBUG_NOTIFIERS=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_RCU_TRACE=y CONFIG_KPROBES_SANITY_TEST=y CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y CONFIG_CPU_NOTIFIER_ERROR_INJECT=m CONFIG_LATENCYTOP=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_DEBUG_PAGEALLOC=y -# CONFIG_FTRACE is not set +CONFIG_BLK_DEV_IO_TRACE=y # CONFIG_STRICT_DEVMEM is not set CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m @@ -173,4 +173,3 @@ CONFIG_CRYPTO_SHA512_S390=m CONFIG_CRYPTO_DES_S390=m CONFIG_CRYPTO_AES_S390=m CONFIG_CRC7=m -CONFIG_VIRTIO_BALLOON=y diff --git a/arch/s390/include/asm/facility.h b/arch/s390/include/asm/facility.h index 1e5b27edc0c9..2ee66a65f2d4 100644 --- a/arch/s390/include/asm/facility.h +++ b/arch/s390/include/asm/facility.h @@ -38,12 +38,11 @@ static inline void stfle(u64 *stfle_fac_list, int size) unsigned long nr; preempt_disable(); - S390_lowcore.stfl_fac_list = 0; asm volatile( " .insn s,0xb2b10000,0(0)\n" /* stfl */ "0:\n" EX_TABLE(0b, 0b) - : "=m" (S390_lowcore.stfl_fac_list)); + : "+m" (S390_lowcore.stfl_fac_list)); nr = 4; /* bytes stored by stfl */ memcpy(stfle_fac_list, &S390_lowcore.stfl_fac_list, 4); if (S390_lowcore.stfl_fac_list & 0x01000000) { diff --git a/arch/s390/include/asm/pgalloc.h b/arch/s390/include/asm/pgalloc.h index 8eef9b5b3cf4..78e3041919de 100644 --- a/arch/s390/include/asm/pgalloc.h +++ b/arch/s390/include/asm/pgalloc.h @@ -22,10 +22,7 @@ void crst_table_free(struct mm_struct *, unsigned long *); unsigned long *page_table_alloc(struct mm_struct *, unsigned long); void page_table_free(struct mm_struct *, unsigned long *); -#ifdef CONFIG_HAVE_RCU_TABLE_FREE void page_table_free_rcu(struct mmu_gather *, unsigned long *); -void __tlb_remove_table(void *_table); -#endif static inline void clear_table(unsigned long *s, unsigned long val, size_t n) { diff --git a/arch/s390/include/asm/swab.h b/arch/s390/include/asm/swab.h index 6bdee21c077e..a3e4ebb32090 100644 --- a/arch/s390/include/asm/swab.h +++ b/arch/s390/include/asm/swab.h @@ -77,7 +77,7 @@ static inline __u16 __arch_swab16p(const __u16 *x) asm volatile( #ifndef __s390x__ - " icm %0,2,%O+1(%R1)\n" + " icm %0,2,%O1+1(%R1)\n" " ic %0,%1\n" : "=&d" (result) : "Q" (*x) : "cc"); #else /* __s390x__ */ diff --git a/arch/s390/include/asm/tlb.h b/arch/s390/include/asm/tlb.h index c687a2c83462..775a5eea8f9e 100644 --- a/arch/s390/include/asm/tlb.h +++ b/arch/s390/include/asm/tlb.h @@ -30,14 +30,10 @@ struct mmu_gather { struct mm_struct *mm; -#ifdef CONFIG_HAVE_RCU_TABLE_FREE struct mmu_table_batch *batch; -#endif unsigned int fullmm; - unsigned int need_flush; }; -#ifdef CONFIG_HAVE_RCU_TABLE_FREE struct mmu_table_batch { struct rcu_head rcu; unsigned int nr; @@ -49,7 +45,6 @@ struct mmu_table_batch { extern void tlb_table_flush(struct mmu_gather *tlb); extern void tlb_remove_table(struct mmu_gather *tlb, void *table); -#endif static inline void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, @@ -57,29 +52,20 @@ static inline void tlb_gather_mmu(struct mmu_gather *tlb, { tlb->mm = mm; tlb->fullmm = full_mm_flush; - tlb->need_flush = 0; -#ifdef CONFIG_HAVE_RCU_TABLE_FREE tlb->batch = NULL; -#endif if (tlb->fullmm) __tlb_flush_mm(mm); } static inline void tlb_flush_mmu(struct mmu_gather *tlb) { - if (!tlb->need_flush) - return; - tlb->need_flush = 0; - __tlb_flush_mm(tlb->mm); -#ifdef CONFIG_HAVE_RCU_TABLE_FREE tlb_table_flush(tlb); -#endif } static inline void tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) { - tlb_flush_mmu(tlb); + tlb_table_flush(tlb); } /* @@ -105,10 +91,8 @@ static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page) static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, unsigned long address) { -#ifdef CONFIG_HAVE_RCU_TABLE_FREE if (!tlb->fullmm) return page_table_free_rcu(tlb, (unsigned long *) pte); -#endif page_table_free(tlb->mm, (unsigned long *) pte); } @@ -125,10 +109,8 @@ static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd, #ifdef __s390x__ if (tlb->mm->context.asce_limit <= (1UL << 31)) return; -#ifdef CONFIG_HAVE_RCU_TABLE_FREE if (!tlb->fullmm) return tlb_remove_table(tlb, pmd); -#endif crst_table_free(tlb->mm, (unsigned long *) pmd); #endif } @@ -146,10 +128,8 @@ static inline void pud_free_tlb(struct mmu_gather *tlb, pud_t *pud, #ifdef __s390x__ if (tlb->mm->context.asce_limit <= (1UL << 42)) return; -#ifdef CONFIG_HAVE_RCU_TABLE_FREE if (!tlb->fullmm) return tlb_remove_table(tlb, pud); -#endif crst_table_free(tlb->mm, (unsigned long *) pud); #endif } diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S index c27a0727f930..adccd908ebc7 100644 --- a/arch/s390/kernel/head.S +++ b/arch/s390/kernel/head.S @@ -474,9 +474,9 @@ ENTRY(startup_kdump) stck __LC_LAST_UPDATE_CLOCK spt 5f-.LPG0(%r13) mvc __LC_LAST_UPDATE_TIMER(8),5f-.LPG0(%r13) + xc __LC_STFL_FAC_LIST(8),__LC_STFL_FAC_LIST #ifndef CONFIG_MARCH_G5 # check capabilities against MARCH_{G5,Z900,Z990,Z9_109,Z10} - xc __LC_STFL_FAC_LIST(8),__LC_STFL_FAC_LIST .insn s,0xb2b10000,__LC_STFL_FAC_LIST # store facility list tm __LC_STFL_FAC_LIST,0x01 # stfle available ? jz 0f diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c index 1c2cdd59ccd0..8a22c27219dd 100644 --- a/arch/s390/kernel/irq.c +++ b/arch/s390/kernel/irq.c @@ -118,9 +118,10 @@ asmlinkage void do_softirq(void) "a" (__do_softirq) : "0", "1", "2", "3", "4", "5", "14", "cc", "memory" ); - } else + } else { /* We are already on the async stack. */ __do_softirq(); + } } local_irq_restore(flags); @@ -192,11 +193,12 @@ int unregister_external_interrupt(u16 code, ext_int_handler_t handler) int index = ext_hash(code); spin_lock_irqsave(&ext_int_hash_lock, flags); - list_for_each_entry_rcu(p, &ext_int_hash[index], entry) + list_for_each_entry_rcu(p, &ext_int_hash[index], entry) { if (p->code == code && p->handler == handler) { list_del_rcu(&p->entry); kfree_rcu(p, rcu); } + } spin_unlock_irqrestore(&ext_int_hash_lock, flags); return 0; } @@ -211,9 +213,10 @@ void __irq_entry do_extint(struct pt_regs *regs, struct ext_code ext_code, old_regs = set_irq_regs(regs); irq_enter(); - if (S390_lowcore.int_clock >= S390_lowcore.clock_comparator) + if (S390_lowcore.int_clock >= S390_lowcore.clock_comparator) { /* Serve timer interrupts first. */ clock_comparator_work(); + } kstat_cpu(smp_processor_id()).irqs[EXTERNAL_INTERRUPT]++; if (ext_code.code != 0x1004) __get_cpu_var(s390_idle).nohz_delay = 1; diff --git a/arch/s390/kernel/perf_cpum_cf.c b/arch/s390/kernel/perf_cpum_cf.c index 46405086479c..cb019f429e88 100644 --- a/arch/s390/kernel/perf_cpum_cf.c +++ b/arch/s390/kernel/perf_cpum_cf.c @@ -178,7 +178,7 @@ static void cpumf_pmu_enable(struct pmu *pmu) err = lcctl(cpuhw->state); if (err) { pr_err("Enabling the performance measuring unit " - "failed with rc=%lx\n", err); + "failed with rc=%x\n", err); return; } @@ -203,7 +203,7 @@ static void cpumf_pmu_disable(struct pmu *pmu) err = lcctl(inactive); if (err) { pr_err("Disabling the performance measuring unit " - "failed with rc=%lx\n", err); + "failed with rc=%x\n", err); return; } diff --git a/arch/s390/mm/maccess.c b/arch/s390/mm/maccess.c index 7bb15fcca75e..e1335dc2b1b7 100644 --- a/arch/s390/mm/maccess.c +++ b/arch/s390/mm/maccess.c @@ -61,21 +61,14 @@ long probe_kernel_write(void *dst, const void *src, size_t size) return copied < 0 ? -EFAULT : 0; } -/* - * Copy memory in real mode (kernel to kernel) - */ -int memcpy_real(void *dest, void *src, size_t count) +static int __memcpy_real(void *dest, void *src, size_t count) { register unsigned long _dest asm("2") = (unsigned long) dest; register unsigned long _len1 asm("3") = (unsigned long) count; register unsigned long _src asm("4") = (unsigned long) src; register unsigned long _len2 asm("5") = (unsigned long) count; - unsigned long flags; int rc = -EFAULT; - if (!count) - return 0; - flags = __arch_local_irq_stnsm(0xf8UL); asm volatile ( "0: mvcle %1,%2,0x0\n" "1: jo 0b\n" @@ -86,7 +79,23 @@ int memcpy_real(void *dest, void *src, size_t count) "+d" (_len2), "=m" (*((long *) dest)) : "m" (*((long *) src)) : "cc", "memory"); - arch_local_irq_restore(flags); + return rc; +} + +/* + * Copy memory in real mode (kernel to kernel) + */ +int memcpy_real(void *dest, void *src, size_t count) +{ + unsigned long flags; + int rc; + + if (!count) + return 0; + local_irq_save(flags); + __arch_local_irq_stnsm(0xfbUL); + rc = __memcpy_real(dest, src, count); + local_irq_restore(flags); return rc; } diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c index 373adf69b01c..6e765bf00670 100644 --- a/arch/s390/mm/pgtable.c +++ b/arch/s390/mm/pgtable.c @@ -678,8 +678,6 @@ void page_table_free(struct mm_struct *mm, unsigned long *table) } } -#ifdef CONFIG_HAVE_RCU_TABLE_FREE - static void __page_table_free_rcu(void *table, unsigned bit) { struct page *page; @@ -733,7 +731,66 @@ void __tlb_remove_table(void *_table) free_pages((unsigned long) table, ALLOC_ORDER); } -#endif +static void tlb_remove_table_smp_sync(void *arg) +{ + /* Simply deliver the interrupt */ +} + +static void tlb_remove_table_one(void *table) +{ + /* + * This isn't an RCU grace period and hence the page-tables cannot be + * assumed to be actually RCU-freed. + * + * It is however sufficient for software page-table walkers that rely + * on IRQ disabling. See the comment near struct mmu_table_batch. + */ + smp_call_function(tlb_remove_table_smp_sync, NULL, 1); + __tlb_remove_table(table); +} + +static void tlb_remove_table_rcu(struct rcu_head *head) +{ + struct mmu_table_batch *batch; + int i; + + batch = container_of(head, struct mmu_table_batch, rcu); + + for (i = 0; i < batch->nr; i++) + __tlb_remove_table(batch->tables[i]); + + free_page((unsigned long)batch); +} + +void tlb_table_flush(struct mmu_gather *tlb) +{ + struct mmu_table_batch **batch = &tlb->batch; + + if (*batch) { + __tlb_flush_mm(tlb->mm); + call_rcu_sched(&(*batch)->rcu, tlb_remove_table_rcu); + *batch = NULL; + } +} + +void tlb_remove_table(struct mmu_gather *tlb, void *table) +{ + struct mmu_table_batch **batch = &tlb->batch; + + if (*batch == NULL) { + *batch = (struct mmu_table_batch *) + __get_free_page(GFP_NOWAIT | __GFP_NOWARN); + if (*batch == NULL) { + __tlb_flush_mm(tlb->mm); + tlb_remove_table_one(table); + return; + } + (*batch)->nr = 0; + } + (*batch)->tables[(*batch)->nr++] = table; + if ((*batch)->nr == MAX_TABLE_BATCH) + tlb_table_flush(tlb); +} /* * switch on pgstes for its userspace process (for kvm) diff --git a/arch/sparc/kernel/leon_smp.c b/arch/sparc/kernel/leon_smp.c index 1210fde18740..160cac9c4036 100644 --- a/arch/sparc/kernel/leon_smp.c +++ b/arch/sparc/kernel/leon_smp.c @@ -23,6 +23,7 @@ #include <linux/pm.h> #include <linux/delay.h> #include <linux/gfp.h> +#include <linux/cpu.h> #include <asm/cacheflush.h> #include <asm/tlbflush.h> @@ -78,6 +79,8 @@ void __cpuinit leon_callin(void) local_flush_tlb_all(); leon_configure_cache_smp(); + notify_cpu_starting(cpuid); + /* Get our local ticker going. */ smp_setup_percpu_timer(); diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c index 232df9949530..3ee51f189a55 100644 --- a/arch/sparc/kernel/sys_sparc_64.c +++ b/arch/sparc/kernel/sys_sparc_64.c @@ -566,15 +566,10 @@ out: SYSCALL_DEFINE2(64_munmap, unsigned long, addr, size_t, len) { - long ret; - if (invalid_64bit_range(addr, len)) return -EINVAL; - down_write(¤t->mm->mmap_sem); - ret = do_munmap(current->mm, addr, len); - up_write(¤t->mm->mmap_sem); - return ret; + return vm_munmap(addr, len); } extern unsigned long do_mremap(unsigned long addr, diff --git a/arch/tile/kernel/single_step.c b/arch/tile/kernel/single_step.c index 9efbc1391b3c..89529c9f0605 100644 --- a/arch/tile/kernel/single_step.c +++ b/arch/tile/kernel/single_step.c @@ -346,12 +346,10 @@ void single_step_once(struct pt_regs *regs) } /* allocate a cache line of writable, executable memory */ - down_write(¤t->mm->mmap_sem); - buffer = (void __user *) do_mmap(NULL, 0, 64, + buffer = (void __user *) vm_mmap(NULL, 0, 64, PROT_EXEC | PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, 0); - up_write(¤t->mm->mmap_sem); if (IS_ERR((void __force *)buffer)) { kfree(state); diff --git a/arch/x86/ia32/ia32_aout.c b/arch/x86/ia32/ia32_aout.c index d511d951a052..4824fb45560f 100644 --- a/arch/x86/ia32/ia32_aout.c +++ b/arch/x86/ia32/ia32_aout.c @@ -119,9 +119,7 @@ static void set_brk(unsigned long start, unsigned long end) end = PAGE_ALIGN(end); if (end <= start) return; - down_write(¤t->mm->mmap_sem); - do_brk(start, end - start); - up_write(¤t->mm->mmap_sem); + vm_brk(start, end - start); } #ifdef CORE_DUMP @@ -332,9 +330,7 @@ static int load_aout_binary(struct linux_binprm *bprm, struct pt_regs *regs) pos = 32; map_size = ex.a_text+ex.a_data; - down_write(¤t->mm->mmap_sem); - error = do_brk(text_addr & PAGE_MASK, map_size); - up_write(¤t->mm->mmap_sem); + error = vm_brk(text_addr & PAGE_MASK, map_size); if (error != (text_addr & PAGE_MASK)) { send_sig(SIGKILL, current, 0); @@ -373,9 +369,7 @@ static int load_aout_binary(struct linux_binprm *bprm, struct pt_regs *regs) if (!bprm->file->f_op->mmap || (fd_offset & ~PAGE_MASK) != 0) { loff_t pos = fd_offset; - down_write(¤t->mm->mmap_sem); - do_brk(N_TXTADDR(ex), ex.a_text+ex.a_data); - up_write(¤t->mm->mmap_sem); + vm_brk(N_TXTADDR(ex), ex.a_text+ex.a_data); bprm->file->f_op->read(bprm->file, (char __user *)N_TXTADDR(ex), ex.a_text+ex.a_data, &pos); @@ -385,26 +379,22 @@ static int load_aout_binary(struct linux_binprm *bprm, struct pt_regs *regs) goto beyond_if; } - down_write(¤t->mm->mmap_sem); - error = do_mmap(bprm->file, N_TXTADDR(ex), ex.a_text, + error = vm_mmap(bprm->file, N_TXTADDR(ex), ex.a_text, PROT_READ | PROT_EXEC, MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE | MAP_EXECUTABLE | MAP_32BIT, fd_offset); - up_write(¤t->mm->mmap_sem); if (error != N_TXTADDR(ex)) { send_sig(SIGKILL, current, 0); return error; } - down_write(¤t->mm->mmap_sem); - error = do_mmap(bprm->file, N_DATADDR(ex), ex.a_data, + error = vm_mmap(bprm->file, N_DATADDR(ex), ex.a_data, PROT_READ | PROT_WRITE | PROT_EXEC, MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE | MAP_EXECUTABLE | MAP_32BIT, fd_offset + ex.a_text); - up_write(¤t->mm->mmap_sem); if (error != N_DATADDR(ex)) { send_sig(SIGKILL, current, 0); return error; @@ -476,9 +466,7 @@ static int load_aout_library(struct file *file) error_time = jiffies; } #endif - down_write(¤t->mm->mmap_sem); - do_brk(start_addr, ex.a_text + ex.a_data + ex.a_bss); - up_write(¤t->mm->mmap_sem); + vm_brk(start_addr, ex.a_text + ex.a_data + ex.a_bss); file->f_op->read(file, (char __user *)start_addr, ex.a_text + ex.a_data, &pos); @@ -490,12 +478,10 @@ static int load_aout_library(struct file *file) goto out; } /* Now use mmap to map the library into memory. */ - down_write(¤t->mm->mmap_sem); - error = do_mmap(file, start_addr, ex.a_text + ex.a_data, + error = vm_mmap(file, start_addr, ex.a_text + ex.a_data, PROT_READ | PROT_WRITE | PROT_EXEC, MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE | MAP_32BIT, N_TXTOFF(ex)); - up_write(¤t->mm->mmap_sem); retval = error; if (error != start_addr) goto out; @@ -503,9 +489,7 @@ static int load_aout_library(struct file *file) len = PAGE_ALIGN(ex.a_text + ex.a_data); bss = ex.a_text + ex.a_data + ex.a_bss; if (bss > len) { - down_write(¤t->mm->mmap_sem); - error = do_brk(start_addr + len, bss - len); - up_write(¤t->mm->mmap_sem); + error = vm_brk(start_addr + len, bss - len); retval = error; if (error != start_addr + len) goto out; diff --git a/arch/x86/kvm/pmu.c b/arch/x86/kvm/pmu.c index 173df38dbda5..2e88438ffd83 100644 --- a/arch/x86/kvm/pmu.c +++ b/arch/x86/kvm/pmu.c @@ -459,17 +459,17 @@ void kvm_pmu_cpuid_update(struct kvm_vcpu *vcpu) pmu->available_event_types = ~entry->ebx & ((1ull << bitmap_len) - 1); if (pmu->version == 1) { - pmu->global_ctrl = (1 << pmu->nr_arch_gp_counters) - 1; - return; + pmu->nr_arch_fixed_counters = 0; + } else { + pmu->nr_arch_fixed_counters = min((int)(entry->edx & 0x1f), + X86_PMC_MAX_FIXED); + pmu->counter_bitmask[KVM_PMC_FIXED] = + ((u64)1 << ((entry->edx >> 5) & 0xff)) - 1; } - pmu->nr_arch_fixed_counters = min((int)(entry->edx & 0x1f), - X86_PMC_MAX_FIXED); - pmu->counter_bitmask[KVM_PMC_FIXED] = - ((u64)1 << ((entry->edx >> 5) & 0xff)) - 1; - pmu->global_ctrl_mask = ~(((1 << pmu->nr_arch_gp_counters) - 1) - | (((1ull << pmu->nr_arch_fixed_counters) - 1) - << X86_PMC_IDX_FIXED)); + pmu->global_ctrl = ((1 << pmu->nr_arch_gp_counters) - 1) | + (((1ull << pmu->nr_arch_fixed_counters) - 1) << X86_PMC_IDX_FIXED); + pmu->global_ctrl_mask = ~pmu->global_ctrl; } void kvm_pmu_init(struct kvm_vcpu *vcpu) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index ad85adfef843..4ff0ab9bc3c8 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -2210,9 +2210,12 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data) msr = find_msr_entry(vmx, msr_index); if (msr) { msr->data = data; - if (msr - vmx->guest_msrs < vmx->save_nmsrs) + if (msr - vmx->guest_msrs < vmx->save_nmsrs) { + preempt_disable(); kvm_set_shared_msr(msr->index, msr->data, msr->mask); + preempt_enable(); + } break; } ret = kvm_set_msr_common(vcpu, msr_index, data); diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 4044ce0bf7c1..91a5e989abcf 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -6336,13 +6336,11 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm, if (npages && !old.rmap) { unsigned long userspace_addr; - down_write(¤t->mm->mmap_sem); - userspace_addr = do_mmap(NULL, 0, + userspace_addr = vm_mmap(NULL, 0, npages * PAGE_SIZE, PROT_READ | PROT_WRITE, map_flags, 0); - up_write(¤t->mm->mmap_sem); if (IS_ERR((void *)userspace_addr)) return PTR_ERR((void *)userspace_addr); @@ -6366,10 +6364,8 @@ void kvm_arch_commit_memory_region(struct kvm *kvm, if (!user_alloc && !old.user_alloc && old.rmap && !npages) { int ret; - down_write(¤t->mm->mmap_sem); - ret = do_munmap(current->mm, old.userspace_addr, + ret = vm_munmap(old.userspace_addr, old.npages * PAGE_SIZE); - up_write(¤t->mm->mmap_sem); if (ret < 0) printk(KERN_WARNING "kvm_vm_ioctl_set_memory_region: " diff --git a/arch/x86/lib/insn.c b/arch/x86/lib/insn.c index 25feb1ae71c5..b1e6c4b2e8eb 100644 --- a/arch/x86/lib/insn.c +++ b/arch/x86/lib/insn.c @@ -379,8 +379,8 @@ err_out: return; } -/* Decode moffset16/32/64 */ -static void __get_moffset(struct insn *insn) +/* Decode moffset16/32/64. Return 0 if failed */ +static int __get_moffset(struct insn *insn) { switch (insn->addr_bytes) { case 2: @@ -397,15 +397,19 @@ static void __get_moffset(struct insn *insn) insn->moffset2.value = get_next(int, insn); insn->moffset2.nbytes = 4; break; + default: /* opnd_bytes must be modified manually */ + goto err_out; } insn->moffset1.got = insn->moffset2.got = 1; + return 1; + err_out: - return; + return 0; } -/* Decode imm v32(Iz) */ -static void __get_immv32(struct insn *insn) +/* Decode imm v32(Iz). Return 0 if failed */ +static int __get_immv32(struct insn *insn) { switch (insn->opnd_bytes) { case 2: @@ -417,14 +421,18 @@ static void __get_immv32(struct insn *insn) insn->immediate.value = get_next(int, insn); insn->immediate.nbytes = 4; break; + default: /* opnd_bytes must be modified manually */ + goto err_out; } + return 1; + err_out: - return; + return 0; } -/* Decode imm v64(Iv/Ov) */ -static void __get_immv(struct insn *insn) +/* Decode imm v64(Iv/Ov), Return 0 if failed */ +static int __get_immv(struct insn *insn) { switch (insn->opnd_bytes) { case 2: @@ -441,15 +449,18 @@ static void __get_immv(struct insn *insn) insn->immediate2.value = get_next(int, insn); insn->immediate2.nbytes = 4; break; + default: /* opnd_bytes must be modified manually */ + goto err_out; } insn->immediate1.got = insn->immediate2.got = 1; + return 1; err_out: - return; + return 0; } /* Decode ptr16:16/32(Ap) */ -static void __get_immptr(struct insn *insn) +static int __get_immptr(struct insn *insn) { switch (insn->opnd_bytes) { case 2: @@ -462,14 +473,17 @@ static void __get_immptr(struct insn *insn) break; case 8: /* ptr16:64 is not exist (no segment) */ - return; + return 0; + default: /* opnd_bytes must be modified manually */ + goto err_out; } insn->immediate2.value = get_next(unsigned short, insn); insn->immediate2.nbytes = 2; insn->immediate1.got = insn->immediate2.got = 1; + return 1; err_out: - return; + return 0; } /** @@ -489,7 +503,8 @@ void insn_get_immediate(struct insn *insn) insn_get_displacement(insn); if (inat_has_moffset(insn->attr)) { - __get_moffset(insn); + if (!__get_moffset(insn)) + goto err_out; goto done; } @@ -517,16 +532,20 @@ void insn_get_immediate(struct insn *insn) insn->immediate2.nbytes = 4; break; case INAT_IMM_PTR: - __get_immptr(insn); + if (!__get_immptr(insn)) + goto err_out; break; case INAT_IMM_VWORD32: - __get_immv32(insn); + if (!__get_immv32(insn)) + goto err_out; break; case INAT_IMM_VWORD: - __get_immv(insn); + if (!__get_immv(insn)) + goto err_out; break; default: - break; + /* Here, insn must have an immediate, but failed */ + goto err_out; } if (inat_has_second_immediate(insn->attr)) { insn->immediate2.value = get_next(char, insn); |