summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/Kconfig.debug41
-rw-r--r--arch/arm/include/asm/hardware/cache-uniphier.h46
-rw-r--r--arch/arm/include/debug/at91.S18
-rw-r--r--arch/arm/kernel/irq.c3
-rw-r--r--arch/arm/mach-at91/pm_suspend.S2
-rw-r--r--arch/arm/mach-bcm/Kconfig15
-rw-r--r--arch/arm/mach-bcm/Makefile5
-rw-r--r--arch/arm/mach-bcm/bcm_nsp.c25
-rw-r--r--arch/arm/mach-bcm/brcmstb.c9
-rw-r--r--arch/arm/mach-berlin/berlin.c6
-rw-r--r--arch/arm/mach-berlin/platsmp.c38
-rw-r--r--arch/arm/mach-digicolor/Kconfig3
-rw-r--r--arch/arm/mach-imx/common.h1
-rw-r--r--arch/arm/mach-imx/mach-imx6ul.c9
-rw-r--r--arch/arm/mach-imx/mach-imx7d.c74
-rw-r--r--arch/arm/mach-imx/pm-imx6.c46
-rw-r--r--arch/arm/mach-imx/suspend-imx6.S3
-rw-r--r--arch/arm/mach-mediatek/Makefile3
-rw-r--r--arch/arm/mach-mediatek/mediatek.c27
-rw-r--r--arch/arm/mach-mediatek/platsmp.c141
-rw-r--r--arch/arm/mach-meson/Kconfig5
-rw-r--r--arch/arm/mach-meson/meson.c1
-rw-r--r--arch/arm/mach-mvebu/coherency.c60
-rw-r--r--arch/arm/mach-mvebu/pmsu.c29
-rw-r--r--arch/arm/mach-orion5x/Kconfig3
-rw-r--r--arch/arm/mach-orion5x/dns323-setup.c53
-rw-r--r--arch/arm/mach-orion5x/tsx09-common.c49
-rw-r--r--arch/arm/mach-s3c24xx/mach-h1940.c10
-rw-r--r--arch/arm/mach-s3c24xx/mach-rx1950.c8
-rw-r--r--arch/arm/mach-s3c64xx/dev-backlight.c4
-rw-r--r--arch/arm/mach-s3c64xx/mach-crag6410.c9
-rw-r--r--arch/arm/mach-s3c64xx/mach-hmt.c9
-rw-r--r--arch/arm/mach-s3c64xx/mach-smartq.c9
-rw-r--r--arch/arm/mach-s3c64xx/mach-smdk6410.c8
-rw-r--r--arch/arm/mach-shmobile/pm-rmobile.c35
-rw-r--r--arch/arm/mach-sunxi/sunxi.c3
-rw-r--r--arch/arm/mach-tegra/board-paz00.c4
-rw-r--r--arch/arm/mach-uniphier/Makefile2
-rw-r--r--arch/arm/mach-uniphier/headsmp.S43
-rw-r--r--arch/arm/mach-uniphier/platsmp.c185
-rw-r--r--arch/arm/mm/Kconfig10
-rw-r--r--arch/arm/mm/Makefile1
-rw-r--r--arch/arm/mm/cache-uniphier.c555
-rw-r--r--arch/arm64/Kconfig.platforms1
44 files changed, 1382 insertions, 229 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 40a3c25c1e0d..259c0ca9c99a 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -123,29 +123,23 @@ choice
0x80020000 | 0xf0020000 | UART8
0x80024000 | 0xf0024000 | UART9
- config AT91_DEBUG_LL_DBGU0
- bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10, 9rl, 9x5, 9n12"
- select DEBUG_AT91_UART
+ config DEBUG_AT91_UART
+ bool "Kernel low-level debugging on Atmel SoCs"
depends on ARCH_AT91
- depends on SOC_AT91RM9200 || SOC_AT91SAM9
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the serial port on atmel devices.
- config AT91_DEBUG_LL_DBGU1
- bool "Kernel low-level debugging on 9263, 9g45 and sama5d3"
- select DEBUG_AT91_UART
- depends on ARCH_AT91
- depends on SOC_AT91SAM9 || SOC_SAMA5
+ SOC DEBUG_UART_PHYS DEBUG_UART_VIRT PORT
+ rm9200, 9260/9g20, 0xfffff200 0xfefff200 DBGU
+ 9261/9g10, 9rl
+ 9263, 9g45, sama5d3 0xffffee00 0xfeffee00 DBGU
+ sama5d4 0xfc00c000 0xfb00c000 USART3
+ sama5d4 0xfc069000 0xfb069000 DBGU
+ sama5d2 0xf8020000 0xf7020000 UART1
- config AT91_DEBUG_LL_DBGU2
- bool "Kernel low-level debugging on sama5d4"
- select DEBUG_AT91_UART
- depends on ARCH_AT91
- depends on SOC_SAMA5
-
- config AT91_DEBUG_LL_DBGU3
- bool "Kernel low-level debugging on sama5d2"
- select DEBUG_AT91_UART
- depends on ARCH_AT91
- depends on SOC_SAMA5
+ Please adjust DEBUG_UART_PHYS configuration options based on
+ your needs.
config DEBUG_BCM2835
bool "Kernel low-level debugging on BCM2835 PL011 UART"
@@ -1249,10 +1243,6 @@ choice
endchoice
-config DEBUG_AT91_UART
- bool
- depends on ARCH_AT91
-
config DEBUG_EXYNOS_UART
bool
@@ -1485,7 +1475,8 @@ config DEBUG_UART_PHYS
DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
- DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
+ DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
+ DEBUG_AT91_UART
config DEBUG_UART_VIRT
hex "Virtual base address of debug UART"
diff --git a/arch/arm/include/asm/hardware/cache-uniphier.h b/arch/arm/include/asm/hardware/cache-uniphier.h
new file mode 100644
index 000000000000..102e3fbe1e10
--- /dev/null
+++ b/arch/arm/include/asm/hardware/cache-uniphier.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __CACHE_UNIPHIER_H
+#define __CACHE_UNIPHIER_H
+
+#include <linux/types.h>
+
+#ifdef CONFIG_CACHE_UNIPHIER
+int uniphier_cache_init(void);
+int uniphier_cache_l2_is_enabled(void);
+void uniphier_cache_l2_touch_range(unsigned long start, unsigned long end);
+void uniphier_cache_l2_set_locked_ways(u32 way_mask);
+#else
+static inline int uniphier_cache_init(void)
+{
+ return -ENODEV;
+}
+
+static inline int uniphier_cache_l2_is_enabled(void)
+{
+ return 0;
+}
+
+static inline void uniphier_cache_l2_touch_range(unsigned long start,
+ unsigned long end)
+{
+}
+
+static inline void uniphier_cache_l2_set_locked_ways(u32 way_mask)
+{
+}
+#endif
+
+#endif /* __CACHE_UNIPHIER_H */
diff --git a/arch/arm/include/debug/at91.S b/arch/arm/include/debug/at91.S
index 2556a8801c8c..43243be94cfc 100644
--- a/arch/arm/include/debug/at91.S
+++ b/arch/arm/include/debug/at91.S
@@ -9,32 +9,22 @@
*
*/
-#if defined(CONFIG_AT91_DEBUG_LL_DBGU0)
-#define AT91_DBGU 0xfffff200 /* AT91_BASE_DBGU0 */
-#elif defined(CONFIG_AT91_DEBUG_LL_DBGU1)
-#define AT91_DBGU 0xffffee00 /* AT91_BASE_DBGU1 */
-#elif defined(CONFIG_AT91_DEBUG_LL_DBGU2)
-/* On sama5d4, use USART3 as low level serial console */
-#define AT91_DBGU 0xfc00c000 /* SAMA5D4_BASE_USART3 */
-#else
-/* On sama5d2, use UART1 as low level serial console */
-#define AT91_DBGU 0xf8020000
-#endif
-
#ifdef CONFIG_MMU
#define AT91_IO_P2V(x) ((x) - 0x01000000)
#else
#define AT91_IO_P2V(x) (x)
#endif
+#define CONFIG_DEBUG_UART_VIRT AT91_IO_P2V(CONFIG_DEBUG_UART_PHYS)
+
#define AT91_DBGU_SR (0x14) /* Status Register */
#define AT91_DBGU_THR (0x1c) /* Transmitter Holding Register */
#define AT91_DBGU_TXRDY (1 << 1) /* Transmitter Ready */
#define AT91_DBGU_TXEMPTY (1 << 9) /* Transmitter Empty */
.macro addruart, rp, rv, tmp
- ldr \rp, =AT91_DBGU @ System peripherals (phys address)
- ldr \rv, =AT91_IO_P2V(AT91_DBGU) @ System peripherals (virt address)
+ ldr \rp, =CONFIG_DEBUG_UART_PHYS @ System peripherals (phys address)
+ ldr \rv, =CONFIG_DEBUG_UART_VIRT @ System peripherals (virt address)
.endm
.macro senduart,rd,rx
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 2766183e69df..1d45320ee125 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -39,6 +39,7 @@
#include <linux/export.h>
#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/cache-uniphier.h>
#include <asm/outercache.h>
#include <asm/exception.h>
#include <asm/mach/arch.h>
@@ -97,6 +98,8 @@ void __init init_IRQ(void)
if (ret)
pr_err("L2C: failed to init: %d\n", ret);
}
+
+ uniphier_cache_init();
}
#ifdef CONFIG_MULTI_IRQ_HANDLER
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index 0d95f488b47a..a25defda3d22 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -80,6 +80,8 @@ tmp2 .req r5
* @r2: base address of second SDRAM Controller or 0 if not present
* @r3: pm information
*/
+/* at91_pm_suspend_in_sram must be 8-byte aligned per the requirements of fncpy() */
+ .align 3
ENTRY(at91_pm_suspend_in_sram)
/* Save registers on stack */
stmfd sp!, {r4 - r12, lr}
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 84bd26535ae9..8c53c55be1fe 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -35,6 +35,20 @@ config ARCH_BCM_CYGNUS
BCM11300, BCM11320, BCM11350, BCM11360,
BCM58300, BCM58302, BCM58303, BCM58305.
+config ARCH_BCM_NSP
+ bool "Broadcom Northstar Plus SoC Support" if ARCH_MULTI_V7
+ select ARCH_BCM_IPROC
+ select ARM_ERRATA_754322
+ select ARM_ERRATA_775420
+ help
+ Support for Broadcom Northstar Plus SoC.
+ Broadcom Northstar Plus family of SoCs are used for switching control
+ and management applications as well as residential router/gateway
+ applications. The SoC features dual core Cortex A9 ARM CPUs,
+ integrating several peripheral interfaces including multiple Gigabit
+ Ethernet PHYs, DDR3 memory, PCIE Gen-2, USB 2.0 and USB 3.0, serial and
+ NAND flash, SATA and several other IO controllers.
+
config ARCH_BCM_5301X
bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
select ARCH_BCM_IPROC
@@ -147,6 +161,7 @@ config ARCH_BRCMSTB
select BCM7120_L2_IRQ
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select ARCH_WANT_OPTIONAL_GPIOLIB
+ select SOC_BRCMSTB
help
Say Y if you intend to run the kernel on a Broadcom ARM-based STB
chipset.
diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
index 1780a3ff42f9..892261fec0ae 100644
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -1,5 +1,5 @@
#
-# Copyright (C) 2012-2014 Broadcom Corporation
+# Copyright (C) 2012-2015 Broadcom Corporation
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
@@ -13,6 +13,9 @@
# Cygnus
obj-$(CONFIG_ARCH_BCM_CYGNUS) += bcm_cygnus.o
+# Northstar Plus
+obj-$(CONFIG_ARCH_BCM_NSP) += bcm_nsp.o
+
# BCM281XX
obj-$(CONFIG_ARCH_BCM_281XX) += board_bcm281xx.o
diff --git a/arch/arm/mach-bcm/bcm_nsp.c b/arch/arm/mach-bcm/bcm_nsp.c
new file mode 100644
index 000000000000..a1101a3d318e
--- /dev/null
+++ b/arch/arm/mach-bcm/bcm_nsp.c
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/mach/arch.h>
+
+static const char *const bcm_nsp_dt_compat[] __initconst = {
+ "brcm,nsp",
+ NULL,
+};
+
+DT_MACHINE_START(NSP_DT, "Broadcom Northstar Plus SoC")
+ .l2c_aux_val = 0,
+ .l2c_aux_mask = ~0,
+ .dt_compat = bcm_nsp_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-bcm/brcmstb.c b/arch/arm/mach-bcm/brcmstb.c
index 3a60f7ee3f0c..99a67cfb7c0d 100644
--- a/arch/arm/mach-bcm/brcmstb.c
+++ b/arch/arm/mach-bcm/brcmstb.c
@@ -12,11 +12,19 @@
*/
#include <linux/init.h>
+#include <linux/irqchip.h>
#include <linux/of_platform.h>
+#include <linux/soc/brcmstb/brcmstb.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+static void __init brcmstb_init_irq(void)
+{
+ irqchip_init();
+ brcmstb_biuctrl_init();
+}
+
static const char *const brcmstb_match[] __initconst = {
"brcm,bcm7445",
"brcm,brcmstb",
@@ -25,4 +33,5 @@ static const char *const brcmstb_match[] __initconst = {
DT_MACHINE_START(BRCMSTB, "Broadcom STB (Flattened Device Tree)")
.dt_compat = brcmstb_match,
+ .init_irq = brcmstb_init_irq,
MACHINE_END
diff --git a/arch/arm/mach-berlin/berlin.c b/arch/arm/mach-berlin/berlin.c
index ac181c6797ee..25d73870ccca 100644
--- a/arch/arm/mach-berlin/berlin.c
+++ b/arch/arm/mach-berlin/berlin.c
@@ -18,6 +18,11 @@
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
+static void __init berlin_init_late(void)
+{
+ platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
+}
+
static const char * const berlin_dt_compat[] = {
"marvell,berlin",
NULL,
@@ -25,6 +30,7 @@ static const char * const berlin_dt_compat[] = {
DT_MACHINE_START(BERLIN_DT, "Marvell Berlin")
.dt_compat = berlin_dt_compat,
+ .init_late = berlin_init_late,
/*
* with DT probing for L2CCs, berlin_init_machine can be removed.
* Note: 88DE3005 (Armada 1500-mini) uses pl310 l2cc
diff --git a/arch/arm/mach-berlin/platsmp.c b/arch/arm/mach-berlin/platsmp.c
index 34a3753e7356..405cd37e4fba 100644
--- a/arch/arm/mach-berlin/platsmp.c
+++ b/arch/arm/mach-berlin/platsmp.c
@@ -14,10 +14,16 @@
#include <linux/of_address.h>
#include <asm/cacheflush.h>
+#include <asm/cp15.h>
#include <asm/smp_plat.h>
#include <asm/smp_scu.h>
-#define CPU_RESET 0x00
+/*
+ * There are two reset registers, one with self-clearing (SC)
+ * reset and one with non-self-clearing reset (NON_SC).
+ */
+#define CPU_RESET_SC 0x00
+#define CPU_RESET_NON_SC 0x20
#define RESET_VECT 0x00
#define SW_RESET_ADDR 0x94
@@ -30,9 +36,11 @@ static inline void berlin_perform_reset_cpu(unsigned int cpu)
{
u32 val;
- val = readl(cpu_ctrl + CPU_RESET);
+ val = readl(cpu_ctrl + CPU_RESET_NON_SC);
+ val &= ~BIT(cpu_logical_map(cpu));
+ writel(val, cpu_ctrl + CPU_RESET_NON_SC);
val |= BIT(cpu_logical_map(cpu));
- writel(val, cpu_ctrl + CPU_RESET);
+ writel(val, cpu_ctrl + CPU_RESET_NON_SC);
}
static int berlin_boot_secondary(unsigned int cpu, struct task_struct *idle)
@@ -91,8 +99,32 @@ unmap_scu:
iounmap(scu_base);
}
+#ifdef CONFIG_HOTPLUG_CPU
+static void berlin_cpu_die(unsigned int cpu)
+{
+ v7_exit_coherency_flush(louis);
+ while (1)
+ cpu_do_idle();
+}
+
+static int berlin_cpu_kill(unsigned int cpu)
+{
+ u32 val;
+
+ val = readl(cpu_ctrl + CPU_RESET_NON_SC);
+ val &= ~BIT(cpu_logical_map(cpu));
+ writel(val, cpu_ctrl + CPU_RESET_NON_SC);
+
+ return 1;
+}
+#endif
+
static struct smp_operations berlin_smp_ops __initdata = {
.smp_prepare_cpus = berlin_smp_prepare_cpus,
.smp_boot_secondary = berlin_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = berlin_cpu_die,
+ .cpu_kill = berlin_cpu_kill,
+#endif
};
CPU_METHOD_OF_DECLARE(berlin_smp, "marvell,berlin-smp", &berlin_smp_ops);
diff --git a/arch/arm/mach-digicolor/Kconfig b/arch/arm/mach-digicolor/Kconfig
index 4f36d8d2bc57..fc65b0f1db48 100644
--- a/arch/arm/mach-digicolor/Kconfig
+++ b/arch/arm/mach-digicolor/Kconfig
@@ -1,7 +1,10 @@
config ARCH_DIGICOLOR
bool "Conexant Digicolor SoC Support"
depends on ARCH_MULTI_V7
+ select ARCH_REQUIRE_GPIOLIB
select CLKSRC_MMIO
select DIGICOLOR_TIMER
select GENERIC_IRQ_CHIP
select MFD_SYSCON
+ select PINCTRL
+ select PINCTRL_DIGICOLOR
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 21e4e8697a58..e2d53839fceb 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -131,6 +131,7 @@ void imx6q_pm_init(void);
void imx6dl_pm_init(void);
void imx6sl_pm_init(void);
void imx6sx_pm_init(void);
+void imx6ul_pm_init(void);
#ifdef CONFIG_PM
void imx51_pm_init(void);
diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c
index 1b97fe133cef..acaf7056efa5 100644
--- a/arch/arm/mach-imx/mach-imx6ul.c
+++ b/arch/arm/mach-imx/mach-imx6ul.c
@@ -67,6 +67,7 @@ static void __init imx6ul_init_machine(void)
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
imx6ul_enet_init();
imx_anatop_init();
+ imx6ul_pm_init();
}
static void __init imx6ul_init_irq(void)
@@ -74,6 +75,13 @@ static void __init imx6ul_init_irq(void)
imx_init_revision_from_anatop();
imx_src_init();
irqchip_init();
+ imx6_pm_ccm_init("fsl,imx6ul-ccm");
+}
+
+static void __init imx6ul_init_late(void)
+{
+ if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ))
+ platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0);
}
static const char *imx6ul_dt_compat[] __initconst = {
@@ -84,5 +92,6 @@ static const char *imx6ul_dt_compat[] __initconst = {
DT_MACHINE_START(IMX6UL, "Freescale i.MX6 Ultralite (Device Tree)")
.init_irq = imx6ul_init_irq,
.init_machine = imx6ul_init_machine,
+ .init_late = imx6ul_init_late,
.dt_compat = imx6ul_dt_compat,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx7d.c b/arch/arm/mach-imx/mach-imx7d.c
index 62f3437257f1..b450f525a670 100644
--- a/arch/arm/mach-imx/mach-imx7d.c
+++ b/arch/arm/mach-imx/mach-imx7d.c
@@ -6,12 +6,85 @@
* published by the Free Software Foundation.
*/
#include <linux/irqchip.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
#include <linux/of_platform.h>
+#include <linux/phy.h>
+#include <linux/regmap.h>
+
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "common.h"
+static int ar8031_phy_fixup(struct phy_device *dev)
+{
+ u16 val;
+
+ /* Set RGMII IO voltage to 1.8V */
+ phy_write(dev, 0x1d, 0x1f);
+ phy_write(dev, 0x1e, 0x8);
+
+ /* disable phy AR8031 SmartEEE function. */
+ phy_write(dev, 0xd, 0x3);
+ phy_write(dev, 0xe, 0x805d);
+ phy_write(dev, 0xd, 0x4003);
+ val = phy_read(dev, 0xe);
+ val &= ~(0x1 << 8);
+ phy_write(dev, 0xe, val);
+
+ /* introduce tx clock delay */
+ phy_write(dev, 0x1d, 0x5);
+ val = phy_read(dev, 0x1e);
+ val |= 0x0100;
+ phy_write(dev, 0x1e, val);
+
+ return 0;
+}
+
+static int bcm54220_phy_fixup(struct phy_device *dev)
+{
+ /* enable RXC skew select RGMII copper mode */
+ phy_write(dev, 0x1e, 0x21);
+ phy_write(dev, 0x1f, 0x7ea8);
+ phy_write(dev, 0x1e, 0x2f);
+ phy_write(dev, 0x1f, 0x71b7);
+
+ return 0;
+}
+
+#define PHY_ID_AR8031 0x004dd074
+#define PHY_ID_BCM54220 0x600d8589
+
+static void __init imx7d_enet_phy_init(void)
+{
+ if (IS_BUILTIN(CONFIG_PHYLIB)) {
+ phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff,
+ ar8031_phy_fixup);
+ phy_register_fixup_for_uid(PHY_ID_BCM54220, 0xffffffff,
+ bcm54220_phy_fixup);
+ }
+}
+
+static void __init imx7d_enet_clk_sel(void)
+{
+ struct regmap *gpr;
+
+ gpr = syscon_regmap_lookup_by_compatible("fsl,imx7d-iomuxc-gpr");
+ if (!IS_ERR(gpr)) {
+ regmap_update_bits(gpr, IOMUXC_GPR1, IMX7D_GPR1_ENET_TX_CLK_SEL_MASK, 0);
+ regmap_update_bits(gpr, IOMUXC_GPR1, IMX7D_GPR1_ENET_CLK_DIR_MASK, 0);
+ } else {
+ pr_err("failed to find fsl,imx7d-iomux-gpr regmap\n");
+ }
+}
+
+static inline void imx7d_enet_init(void)
+{
+ imx7d_enet_phy_init();
+ imx7d_enet_clk_sel();
+}
+
static void __init imx7d_init_machine(void)
{
struct device *parent;
@@ -22,6 +95,7 @@ static void __init imx7d_init_machine(void)
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
imx_anatop_init();
+ imx7d_enet_init();
}
static void __init imx7d_init_irq(void)
diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index 8ff8fc0b261c..4470376af5f8 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -93,6 +93,7 @@ struct imx6_pm_socdata {
const char *src_compat;
const char *iomuxc_compat;
const char *gpc_compat;
+ const char *pl310_compat;
const u32 mmdc_io_num;
const u32 *mmdc_io_offset;
};
@@ -137,11 +138,19 @@ static const u32 imx6sx_mmdc_io_offset[] __initconst = {
0x330, 0x334, 0x338, 0x33c, /* SDQS0 ~ SDQS3 */
};
+static const u32 imx6ul_mmdc_io_offset[] __initconst = {
+ 0x244, 0x248, 0x24c, 0x250, /* DQM0, DQM1, RAS, CAS */
+ 0x27c, 0x498, 0x4a4, 0x490, /* SDCLK0, GPR_B0DS-B1DS, GPR_ADDS */
+ 0x280, 0x284, 0x260, 0x264, /* SDQS0~1, SODT0, SODT1 */
+ 0x494, 0x4b0, /* MODE_CTL, MODE, */
+};
+
static const struct imx6_pm_socdata imx6q_pm_data __initconst = {
.mmdc_compat = "fsl,imx6q-mmdc",
.src_compat = "fsl,imx6q-src",
.iomuxc_compat = "fsl,imx6q-iomuxc",
.gpc_compat = "fsl,imx6q-gpc",
+ .pl310_compat = "arm,pl310-cache",
.mmdc_io_num = ARRAY_SIZE(imx6q_mmdc_io_offset),
.mmdc_io_offset = imx6q_mmdc_io_offset,
};
@@ -151,6 +160,7 @@ static const struct imx6_pm_socdata imx6dl_pm_data __initconst = {
.src_compat = "fsl,imx6q-src",
.iomuxc_compat = "fsl,imx6dl-iomuxc",
.gpc_compat = "fsl,imx6q-gpc",
+ .pl310_compat = "arm,pl310-cache",
.mmdc_io_num = ARRAY_SIZE(imx6dl_mmdc_io_offset),
.mmdc_io_offset = imx6dl_mmdc_io_offset,
};
@@ -160,6 +170,7 @@ static const struct imx6_pm_socdata imx6sl_pm_data __initconst = {
.src_compat = "fsl,imx6sl-src",
.iomuxc_compat = "fsl,imx6sl-iomuxc",
.gpc_compat = "fsl,imx6sl-gpc",
+ .pl310_compat = "arm,pl310-cache",
.mmdc_io_num = ARRAY_SIZE(imx6sl_mmdc_io_offset),
.mmdc_io_offset = imx6sl_mmdc_io_offset,
};
@@ -169,10 +180,21 @@ static const struct imx6_pm_socdata imx6sx_pm_data __initconst = {
.src_compat = "fsl,imx6sx-src",
.iomuxc_compat = "fsl,imx6sx-iomuxc",
.gpc_compat = "fsl,imx6sx-gpc",
+ .pl310_compat = "arm,pl310-cache",
.mmdc_io_num = ARRAY_SIZE(imx6sx_mmdc_io_offset),
.mmdc_io_offset = imx6sx_mmdc_io_offset,
};
+static const struct imx6_pm_socdata imx6ul_pm_data __initconst = {
+ .mmdc_compat = "fsl,imx6ul-mmdc",
+ .src_compat = "fsl,imx6ul-src",
+ .iomuxc_compat = "fsl,imx6ul-iomuxc",
+ .gpc_compat = "fsl,imx6ul-gpc",
+ .pl310_compat = NULL,
+ .mmdc_io_num = ARRAY_SIZE(imx6ul_mmdc_io_offset),
+ .mmdc_io_offset = imx6ul_mmdc_io_offset,
+};
+
/*
* This structure is for passing necessary data for low level ocram
* suspend code(arch/arm/mach-imx/suspend-imx6.S), if this struct
@@ -290,7 +312,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
val |= BM_CLPCR_SBYOS;
if (cpu_is_imx6sl())
val |= BM_CLPCR_BYPASS_PMIC_READY;
- if (cpu_is_imx6sl() || cpu_is_imx6sx())
+ if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul())
val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
else
val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
@@ -330,6 +352,10 @@ static int imx6q_suspend_finish(unsigned long val)
* as we need to float DDR IO.
*/
local_flush_tlb_all();
+ /* check if need to flush internal L2 cache */
+ if (!((struct imx6_cpu_pm_info *)
+ suspend_ocram_base)->l2_base.vbase)
+ flush_cache_all();
imx6_suspend_in_ocram_fn(suspend_ocram_base);
}
@@ -470,6 +496,7 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
suspend_ocram_base = __arm_ioremap_exec(ocram_pbase,
MX6Q_SUSPEND_OCRAM_SIZE, false);
+ memset(suspend_ocram_base, 0, sizeof(*pm_info));
pm_info = suspend_ocram_base;
pm_info->pbase = ocram_pbase;
pm_info->resume_addr = virt_to_phys(v7_cpu_resume);
@@ -505,11 +532,13 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
goto gpc_map_failed;
}
- ret = imx6_pm_get_base(&pm_info->l2_base, "arm,pl310-cache");
- if (ret) {
- pr_warn("%s: failed to get pl310-cache base %d!\n",
- __func__, ret);
- goto pl310_cache_map_failed;
+ if (socdata->pl310_compat) {
+ ret = imx6_pm_get_base(&pm_info->l2_base, socdata->pl310_compat);
+ if (ret) {
+ pr_warn("%s: failed to get pl310-cache base %d!\n",
+ __func__, ret);
+ goto pl310_cache_map_failed;
+ }
}
pm_info->ddr_type = imx_mmdc_get_ddr_type();
@@ -610,3 +639,8 @@ void __init imx6sx_pm_init(void)
{
imx6_pm_common_init(&imx6sx_pm_data);
}
+
+void __init imx6ul_pm_init(void)
+{
+ imx6_pm_common_init(&imx6ul_pm_data);
+}
diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S
index b99987b023fa..76ee2ceec8d5 100644
--- a/arch/arm/mach-imx/suspend-imx6.S
+++ b/arch/arm/mach-imx/suspend-imx6.S
@@ -79,12 +79,15 @@
/* sync L2 cache to drain L2's buffers to DRAM. */
#ifdef CONFIG_CACHE_L2X0
ldr r11, [r0, #PM_INFO_MX6Q_L2_V_OFFSET]
+ teq r11, #0
+ beq 6f
mov r6, #0x0
str r6, [r11, #L2X0_CACHE_SYNC]
1:
ldr r6, [r11, #L2X0_CACHE_SYNC]
ands r6, r6, #0x1
bne 1b
+6:
#endif
.endm
diff --git a/arch/arm/mach-mediatek/Makefile b/arch/arm/mach-mediatek/Makefile
index 43e619f56172..21164605b83f 100644
--- a/arch/arm/mach-mediatek/Makefile
+++ b/arch/arm/mach-mediatek/Makefile
@@ -1 +1,4 @@
+ifeq ($(CONFIG_SMP),y)
+obj-$(CONFIG_ARCH_MEDIATEK) += platsmp.o
+endif
obj-$(CONFIG_ARCH_MEDIATEK) += mediatek.o
diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c
index a9549005097e..d019a080a559 100644
--- a/arch/arm/mach-mediatek/mediatek.c
+++ b/arch/arm/mach-mediatek/mediatek.c
@@ -16,6 +16,32 @@
*/
#include <linux/init.h>
#include <asm/mach/arch.h>
+#include <linux/of.h>
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+
+
+#define GPT6_CON_MT65xx 0x10008060
+#define GPT_ENABLE 0x31
+
+static void __init mediatek_timer_init(void)
+{
+ void __iomem *gpt_base;
+
+ if (of_machine_is_compatible("mediatek,mt6589") ||
+ of_machine_is_compatible("mediatek,mt8135") ||
+ of_machine_is_compatible("mediatek,mt8127")) {
+ /* turn on GPT6 which ungates arch timer clocks */
+ gpt_base = ioremap(GPT6_CON_MT65xx, 0x04);
+
+ /* enable clock and set to free-run */
+ writel(GPT_ENABLE, gpt_base);
+ iounmap(gpt_base);
+ }
+
+ of_clk_init(NULL);
+ clocksource_probe();
+};
static const char * const mediatek_board_dt_compat[] = {
"mediatek,mt6589",
@@ -27,4 +53,5 @@ static const char * const mediatek_board_dt_compat[] = {
DT_MACHINE_START(MEDIATEK_DT, "Mediatek Cortex-A7 (Device Tree)")
.dt_compat = mediatek_board_dt_compat,
+ .init_time = mediatek_timer_init,
MACHINE_END
diff --git a/arch/arm/mach-mediatek/platsmp.c b/arch/arm/mach-mediatek/platsmp.c
new file mode 100644
index 000000000000..8141f3f8afed
--- /dev/null
+++ b/arch/arm/mach-mediatek/platsmp.c
@@ -0,0 +1,141 @@
+/*
+ * arch/arm/mach-mediatek/platsmp.c
+ *
+ * Copyright (c) 2014 Mediatek Inc.
+ * Author: Shunli Wang <shunli.wang@mediatek.com>
+ * Yingjoe Chen <yingjoe.chen@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/io.h>
+#include <linux/memblock.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/string.h>
+#include <linux/threads.h>
+
+#define MTK_MAX_CPU 8
+#define MTK_SMP_REG_SIZE 0x1000
+
+struct mtk_smp_boot_info {
+ unsigned long smp_base;
+ unsigned int jump_reg;
+ unsigned int core_keys[MTK_MAX_CPU - 1];
+ unsigned int core_regs[MTK_MAX_CPU - 1];
+};
+
+static const struct mtk_smp_boot_info mtk_mt8135_tz_boot = {
+ 0x80002000, 0x3fc,
+ { 0x534c4131, 0x4c415332, 0x41534c33 },
+ { 0x3f8, 0x3f8, 0x3f8 },
+};
+
+static const struct mtk_smp_boot_info mtk_mt6589_boot = {
+ 0x10002000, 0x34,
+ { 0x534c4131, 0x4c415332, 0x41534c33 },
+ { 0x38, 0x3c, 0x40 },
+};
+
+static const struct of_device_id mtk_tz_smp_boot_infos[] __initconst = {
+ { .compatible = "mediatek,mt8135", .data = &mtk_mt8135_tz_boot },
+ { .compatible = "mediatek,mt8127", .data = &mtk_mt8135_tz_boot },
+};
+
+static const struct of_device_id mtk_smp_boot_infos[] __initconst = {
+ { .compatible = "mediatek,mt6589", .data = &mtk_mt6589_boot },
+};
+
+static void __iomem *mtk_smp_base;
+static const struct mtk_smp_boot_info *mtk_smp_info;
+
+static int mtk_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ if (!mtk_smp_base)
+ return -EINVAL;
+
+ if (!mtk_smp_info->core_keys[cpu-1])
+ return -EINVAL;
+
+ writel_relaxed(mtk_smp_info->core_keys[cpu-1],
+ mtk_smp_base + mtk_smp_info->core_regs[cpu-1]);
+
+ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+ return 0;
+}
+
+static void __init __mtk_smp_prepare_cpus(unsigned int max_cpus, int trustzone)
+{
+ int i, num;
+ const struct of_device_id *infos;
+
+ if (trustzone) {
+ num = ARRAY_SIZE(mtk_tz_smp_boot_infos);
+ infos = mtk_tz_smp_boot_infos;
+ } else {
+ num = ARRAY_SIZE(mtk_smp_boot_infos);
+ infos = mtk_smp_boot_infos;
+ }
+
+ /* Find smp boot info for this SoC */
+ for (i = 0; i < num; i++) {
+ if (of_machine_is_compatible(infos[i].compatible)) {
+ mtk_smp_info = infos[i].data;
+ break;
+ }
+ }
+
+ if (!mtk_smp_info) {
+ pr_err("%s: Device is not supported\n", __func__);
+ return;
+ }
+
+ if (trustzone) {
+ /* smp_base(trustzone-bootinfo) is reserved by device tree */
+ mtk_smp_base = phys_to_virt(mtk_smp_info->smp_base);
+ } else {
+ mtk_smp_base = ioremap(mtk_smp_info->smp_base, MTK_SMP_REG_SIZE);
+ if (!mtk_smp_base) {
+ pr_err("%s: Can't remap %lx\n", __func__,
+ mtk_smp_info->smp_base);
+ return;
+ }
+ }
+
+ /*
+ * write the address of slave startup address into the system-wide
+ * jump register
+ */
+ writel_relaxed(virt_to_phys(secondary_startup_arm),
+ mtk_smp_base + mtk_smp_info->jump_reg);
+}
+
+static void __init mtk_tz_smp_prepare_cpus(unsigned int max_cpus)
+{
+ __mtk_smp_prepare_cpus(max_cpus, 1);
+}
+
+static void __init mtk_smp_prepare_cpus(unsigned int max_cpus)
+{
+ __mtk_smp_prepare_cpus(max_cpus, 0);
+}
+
+static struct smp_operations mt81xx_tz_smp_ops __initdata = {
+ .smp_prepare_cpus = mtk_tz_smp_prepare_cpus,
+ .smp_boot_secondary = mtk_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(mt81xx_tz_smp, "mediatek,mt81xx-tz-smp", &mt81xx_tz_smp_ops);
+
+static struct smp_operations mt6589_smp_ops __initdata = {
+ .smp_prepare_cpus = mtk_smp_prepare_cpus,
+ .smp_boot_secondary = mtk_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(mt6589_smp, "mediatek,mt6589-smp", &mt6589_smp_ops);
diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig
index 0743e2059645..5d56f86ae1a4 100644
--- a/arch/arm/mach-meson/Kconfig
+++ b/arch/arm/mach-meson/Kconfig
@@ -19,4 +19,9 @@ config MACH_MESON8
default ARCH_MESON
select MESON6_TIMER
+config MACH_MESON8B
+ bool "Amlogic Meson8b SoCs support"
+ default ARCH_MESON
+ select MESON6_TIMER
+
endif
diff --git a/arch/arm/mach-meson/meson.c b/arch/arm/mach-meson/meson.c
index 5d6affe6a694..4e2357178625 100644
--- a/arch/arm/mach-meson/meson.c
+++ b/arch/arm/mach-meson/meson.c
@@ -19,6 +19,7 @@
static const char * const meson_common_board_compat[] = {
"amlogic,meson6",
"amlogic,meson8",
+ "amlogic,meson8b",
NULL,
};
diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c
index 44eedf331ae7..55348ee5a352 100644
--- a/arch/arm/mach-mvebu/coherency.c
+++ b/arch/arm/mach-mvebu/coherency.c
@@ -40,6 +40,7 @@
unsigned long coherency_phys_base;
void __iomem *coherency_base;
static void __iomem *coherency_cpu_base;
+static void __iomem *cpu_config_base;
/* Coherency fabric registers */
#define IO_SYNC_BARRIER_CTL_OFFSET 0x0
@@ -65,6 +66,31 @@ static const struct of_device_id of_coherency_table[] = {
int ll_enable_coherency(void);
void ll_add_cpu_to_smp_group(void);
+#define CPU_CONFIG_SHARED_L2 BIT(16)
+
+/*
+ * Disable the "Shared L2 Present" bit in CPU Configuration register
+ * on Armada XP.
+ *
+ * The "Shared L2 Present" bit affects the "level of coherence" value
+ * in the clidr CP15 register. Cache operation functions such as
+ * "flush all" and "invalidate all" operate on all the cache levels
+ * that included in the defined level of coherence. When HW I/O
+ * coherency is used, this bit causes unnecessary flushes of the L2
+ * cache.
+ */
+static void armada_xp_clear_shared_l2(void)
+{
+ u32 reg;
+
+ if (!cpu_config_base)
+ return;
+
+ reg = readl(cpu_config_base);
+ reg &= ~CPU_CONFIG_SHARED_L2;
+ writel(reg, cpu_config_base);
+}
+
static int mvebu_hwcc_notifier(struct notifier_block *nb,
unsigned long event, void *__dev)
{
@@ -85,9 +111,24 @@ static struct notifier_block mvebu_hwcc_pci_nb = {
.notifier_call = mvebu_hwcc_notifier,
};
+static int armada_xp_clear_shared_l2_notifier_func(struct notifier_block *nfb,
+ unsigned long action, void *hcpu)
+{
+ if (action == CPU_STARTING || action == CPU_STARTING_FROZEN)
+ armada_xp_clear_shared_l2();
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block armada_xp_clear_shared_l2_notifier = {
+ .notifier_call = armada_xp_clear_shared_l2_notifier_func,
+ .priority = 100,
+};
+
static void __init armada_370_coherency_init(struct device_node *np)
{
struct resource res;
+ struct device_node *cpu_config_np;
of_address_to_resource(np, 0, &res);
coherency_phys_base = res.start;
@@ -100,6 +141,23 @@ static void __init armada_370_coherency_init(struct device_node *np)
sync_cache_w(&coherency_phys_base);
coherency_base = of_iomap(np, 0);
coherency_cpu_base = of_iomap(np, 1);
+
+ cpu_config_np = of_find_compatible_node(NULL, NULL,
+ "marvell,armada-xp-cpu-config");
+ if (!cpu_config_np)
+ goto exit;
+
+ cpu_config_base = of_iomap(cpu_config_np, 0);
+ if (!cpu_config_base) {
+ of_node_put(cpu_config_np);
+ goto exit;
+ }
+
+ of_node_put(cpu_config_np);
+
+ register_cpu_notifier(&armada_xp_clear_shared_l2_notifier);
+
+exit:
set_cpu_coherent();
}
@@ -204,6 +262,8 @@ int set_cpu_coherent(void)
pr_warn("Coherency fabric is not initialized\n");
return 1;
}
+
+ armada_xp_clear_shared_l2();
ll_add_cpu_to_smp_group();
return ll_enable_coherency();
}
diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c
index 9658b5a11e38..ed8fda4cd055 100644
--- a/arch/arm/mach-mvebu/pmsu.c
+++ b/arch/arm/mach-mvebu/pmsu.c
@@ -379,6 +379,16 @@ static struct notifier_block mvebu_v7_cpu_pm_notifier = {
static struct platform_device mvebu_v7_cpuidle_device;
+static int broken_idle(struct device_node *np)
+{
+ if (of_property_read_bool(np, "broken-idle")) {
+ pr_warn("CPU idle is currently broken: disabling\n");
+ return 1;
+ }
+
+ return 0;
+}
+
static __init int armada_370_cpuidle_init(void)
{
struct device_node *np;
@@ -387,7 +397,9 @@ static __init int armada_370_cpuidle_init(void)
np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric");
if (!np)
return -ENODEV;
- of_node_put(np);
+
+ if (broken_idle(np))
+ goto end;
/*
* On Armada 370, there is "a slow exit process from the deep
@@ -406,6 +418,8 @@ static __init int armada_370_cpuidle_init(void)
mvebu_v7_cpuidle_device.dev.platform_data = armada_370_xp_cpu_suspend;
mvebu_v7_cpuidle_device.name = "cpuidle-armada-370";
+end:
+ of_node_put(np);
return 0;
}
@@ -422,6 +436,10 @@ static __init int armada_38x_cpuidle_init(void)
"marvell,armada-380-coherency-fabric");
if (!np)
return -ENODEV;
+
+ if (broken_idle(np))
+ goto end;
+
of_node_put(np);
np = of_find_compatible_node(NULL, NULL,
@@ -430,7 +448,6 @@ static __init int armada_38x_cpuidle_init(void)
return -ENODEV;
mpsoc_base = of_iomap(np, 0);
BUG_ON(!mpsoc_base);
- of_node_put(np);
/* Set up reset mask when powering down the cpus */
reg = readl(mpsoc_base + MPCORE_RESET_CTL);
@@ -450,6 +467,8 @@ static __init int armada_38x_cpuidle_init(void)
mvebu_v7_cpuidle_device.dev.platform_data = armada_38x_cpu_suspend;
mvebu_v7_cpuidle_device.name = "cpuidle-armada-38x";
+end:
+ of_node_put(np);
return 0;
}
@@ -460,12 +479,16 @@ static __init int armada_xp_cpuidle_init(void)
np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric");
if (!np)
return -ENODEV;
- of_node_put(np);
+
+ if (broken_idle(np))
+ goto end;
mvebu_cpu_resume = armada_370_xp_cpu_resume;
mvebu_v7_cpuidle_device.dev.platform_data = armada_370_xp_cpu_suspend;
mvebu_v7_cpuidle_device.name = "cpuidle-armada-xp";
+end:
+ of_node_put(np);
return 0;
}
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 08d2be2ea41f..66f1c952c048 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -45,6 +45,7 @@ config MACH_KUROBOX_PRO
config MACH_DNS323
bool "D-Link DNS-323"
+ select GENERIC_NET_UTILS
select I2C_BOARDINFO
help
Say 'Y' here if you want your kernel to support the
@@ -52,6 +53,7 @@ config MACH_DNS323
config MACH_TS209
bool "QNAP TS-109/TS-209"
+ select GENERIC_NET_UTILS
help
Say 'Y' here if you want your kernel to support the
QNAP TS-109/TS-209 platform.
@@ -93,6 +95,7 @@ config MACH_LINKSTATION_LS_HGL
config MACH_TS409
bool "QNAP TS-409"
+ select GENERIC_NET_UTILS
help
Say 'Y' here if you want your kernel to support the
QNAP TS-409 platform.
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index f267e58a8283..bc279a853075 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -173,42 +173,10 @@ static struct mv643xx_eth_platform_data dns323_eth_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
-/* dns323_parse_hex_*() taken from tsx09-common.c; should a common copy of these
- * functions be kept somewhere?
- */
-static int __init dns323_parse_hex_nibble(char n)
-{
- if (n >= '0' && n <= '9')
- return n - '0';
-
- if (n >= 'A' && n <= 'F')
- return n - 'A' + 10;
-
- if (n >= 'a' && n <= 'f')
- return n - 'a' + 10;
-
- return -1;
-}
-
-static int __init dns323_parse_hex_byte(const char *b)
-{
- int hi;
- int lo;
-
- hi = dns323_parse_hex_nibble(b[0]);
- lo = dns323_parse_hex_nibble(b[1]);
-
- if (hi < 0 || lo < 0)
- return -1;
-
- return (hi << 4) | lo;
-}
-
static int __init dns323_read_mac_addr(void)
{
u_int8_t addr[6];
- int i;
- char *mac_page;
+ void __iomem *mac_page;
/* MAC address is stored as a regular ol' string in /dev/mtdblock4
* (0x007d0000-0x00800000) starting at offset 196480 (0x2ff80).
@@ -217,23 +185,8 @@ static int __init dns323_read_mac_addr(void)
if (!mac_page)
return -ENOMEM;
- /* Sanity check the string we're looking at */
- for (i = 0; i < 5; i++) {
- if (*(mac_page + (i * 3) + 2) != ':') {
- goto error_fail;
- }
- }
-
- for (i = 0; i < 6; i++) {
- int byte;
-
- byte = dns323_parse_hex_byte(mac_page + (i * 3));
- if (byte < 0) {
- goto error_fail;
- }
-
- addr[i] = byte;
- }
+ if (!mac_pton((__force const char *) mac_page, addr))
+ goto error_fail;
iounmap(mac_page);
printk("DNS-323: Found ethernet MAC address: %pM\n", addr);
diff --git a/arch/arm/mach-orion5x/tsx09-common.c b/arch/arm/mach-orion5x/tsx09-common.c
index 24b2959719fa..d42e006597c7 100644
--- a/arch/arm/mach-orion5x/tsx09-common.c
+++ b/arch/arm/mach-orion5x/tsx09-common.c
@@ -53,53 +53,12 @@ struct mv643xx_eth_platform_data qnap_tsx09_eth_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
-static int __init qnap_tsx09_parse_hex_nibble(char n)
-{
- if (n >= '0' && n <= '9')
- return n - '0';
-
- if (n >= 'A' && n <= 'F')
- return n - 'A' + 10;
-
- if (n >= 'a' && n <= 'f')
- return n - 'a' + 10;
-
- return -1;
-}
-
-static int __init qnap_tsx09_parse_hex_byte(const char *b)
-{
- int hi;
- int lo;
-
- hi = qnap_tsx09_parse_hex_nibble(b[0]);
- lo = qnap_tsx09_parse_hex_nibble(b[1]);
-
- if (hi < 0 || lo < 0)
- return -1;
-
- return (hi << 4) | lo;
-}
-
static int __init qnap_tsx09_check_mac_addr(const char *addr_str)
{
u_int8_t addr[6];
- int i;
- for (i = 0; i < 6; i++) {
- int byte;
-
- /*
- * Enforce "xx:xx:xx:xx:xx:xx\n" format.
- */
- if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
- return -1;
-
- byte = qnap_tsx09_parse_hex_byte(addr_str + (i * 3));
- if (byte < 0)
- return -1;
- addr[i] = byte;
- }
+ if (!mac_pton(addr_str, addr))
+ return -1;
printk(KERN_INFO "tsx09: found ethernet mac address %pM\n", addr);
@@ -118,12 +77,12 @@ void __init qnap_tsx09_find_mac_addr(u32 mem_base, u32 size)
unsigned long addr;
for (addr = mem_base; addr < (mem_base + size); addr += 1024) {
- char *nor_page;
+ void __iomem *nor_page;
int ret = 0;
nor_page = ioremap(addr, 1024);
if (nor_page != NULL) {
- ret = qnap_tsx09_check_mac_addr(nor_page);
+ ret = qnap_tsx09_check_mac_addr((__force const char *)nor_page);
iounmap(nor_page);
}
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index d40d4f5244c6..9f54300df4b3 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -25,6 +25,7 @@
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/i2c.h>
#include <linux/leds.h>
@@ -469,6 +470,11 @@ static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = {
.ocr_avail = MMC_VDD_32_33,
};
+static struct pwm_lookup h1940_pwm_lookup[] = {
+ PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight", NULL, 36296,
+ PWM_POLARITY_NORMAL),
+};
+
static int h1940_backlight_init(struct device *dev)
{
gpio_request(S3C2410_GPB(0), "Backlight");
@@ -503,11 +509,8 @@ static void h1940_backlight_exit(struct device *dev)
static struct platform_pwm_backlight_data backlight_data = {
- .pwm_id = 0,
.max_brightness = 100,
.dft_brightness = 50,
- /* tcnt = 0x31 */
- .pwm_period_ns = 36296,
.enable_gpio = -1,
.init = h1940_backlight_init,
.notify = h1940_backlight_notify,
@@ -725,6 +728,7 @@ static void __init h1940_init(void)
gpio_request(H1940_LATCH_SD_POWER, "SD power");
gpio_direction_output(H1940_LATCH_SD_POWER, 0);
+ pwm_add_table(h1940_pwm_lookup, ARRAY_SIZE(h1940_pwm_lookup));
platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
gpio_request(S3C2410_GPA(1), "Red LED blink");
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 1d35ff375a01..774c982a7b7e 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -375,6 +375,11 @@ static struct s3c2410fb_mach_info rx1950_lcd_cfg = {
};
+static struct pwm_lookup rx1950_pwm_lookup[] = {
+ PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight.0", NULL, 48000,
+ PWM_POLARITY_NORMAL),
+};
+
static struct pwm_device *lcd_pwm;
static void rx1950_lcd_power(int enable)
@@ -520,10 +525,8 @@ static int rx1950_backlight_notify(struct device *dev, int brightness)
}
static struct platform_pwm_backlight_data rx1950_backlight_data = {
- .pwm_id = 0,
.max_brightness = 24,
.dft_brightness = 4,
- .pwm_period_ns = 48000,
.enable_gpio = -1,
.init = rx1950_backlight_init,
.notify = rx1950_backlight_notify,
@@ -792,6 +795,7 @@ static void __init rx1950_init_machine(void)
gpio_direction_output(S3C2410_GPA(4), 0);
gpio_direction_output(S3C2410_GPJ(6), 0);
+ pwm_add_table(rx1950_pwm_lookup, ARRAY_SIZE(rx1950_pwm_lookup));
platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));
i2c_register_board_info(0, rx1950_i2c_devices,
diff --git a/arch/arm/mach-s3c64xx/dev-backlight.c b/arch/arm/mach-s3c64xx/dev-backlight.c
index 38c323e68e3f..e62e789f9aee 100644
--- a/arch/arm/mach-s3c64xx/dev-backlight.c
+++ b/arch/arm/mach-s3c64xx/dev-backlight.c
@@ -69,7 +69,6 @@ static struct samsung_bl_drvdata samsung_dfl_bl_data __initdata = {
.plat_data = {
.max_brightness = 255,
.dft_brightness = 255,
- .pwm_period_ns = 78770,
.enable_gpio = -1,
.init = samsung_bl_init,
.exit = samsung_bl_exit,
@@ -111,7 +110,6 @@ void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
samsung_bl_data = &samsung_bl_drvdata->plat_data;
/* Copy board specific data provided by user */
- samsung_bl_data->pwm_id = bl_data->pwm_id;
samsung_bl_device->dev.parent = &samsung_device_pwm.dev;
if (bl_data->max_brightness)
@@ -120,8 +118,6 @@ void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
samsung_bl_data->dft_brightness = bl_data->dft_brightness;
if (bl_data->lth_brightness)
samsung_bl_data->lth_brightness = bl_data->lth_brightness;
- if (bl_data->pwm_period_ns)
- samsung_bl_data->pwm_period_ns = bl_data->pwm_period_ns;
if (bl_data->enable_gpio >= 0)
samsung_bl_data->enable_gpio = bl_data->enable_gpio;
if (bl_data->init)
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 14bd9ae3f476..f776adcdaee8 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -25,6 +25,7 @@
#include <linux/mmc/host.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/dm9000.h>
#include <linux/gpio_keys.h>
@@ -108,11 +109,14 @@ static struct s3c2410_uartcfg crag6410_uartcfgs[] __initdata = {
},
};
+static struct pwm_lookup crag6410_pwm_lookup[] = {
+ PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight", NULL, 100000,
+ PWM_POLARITY_NORMAL),
+};
+
static struct platform_pwm_backlight_data crag6410_backlight_data = {
- .pwm_id = 0,
.max_brightness = 1000,
.dft_brightness = 600,
- .pwm_period_ns = 100000, /* about 1kHz */
.enable_gpio = -1,
};
@@ -843,6 +847,7 @@ static void __init crag6410_machine_init(void)
samsung_keypad_set_platdata(&crag6410_keypad_data);
s3c64xx_spi0_set_platdata(NULL, 0, 2);
+ pwm_add_table(crag6410_pwm_lookup, ARRAY_SIZE(crag6410_pwm_lookup));
platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices));
gpio_led_register_device(-1, &gpio_leds_pdata);
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index e4b087c58ee6..816b39d1e6d1 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -19,6 +19,7 @@
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/leds.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
@@ -73,6 +74,11 @@ static struct s3c2410_uartcfg hmt_uartcfgs[] __initdata = {
},
};
+static struct pwm_lookup hmt_pwm_lookup[] = {
+ PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL,
+ 1000000000 / (100 * 256 * 20), PWM_POLARITY_NORMAL),
+};
+
static int hmt_bl_init(struct device *dev)
{
int ret;
@@ -110,10 +116,8 @@ static void hmt_bl_exit(struct device *dev)
}
static struct platform_pwm_backlight_data hmt_backlight_data = {
- .pwm_id = 1,
.max_brightness = 100 * 256,
.dft_brightness = 40 * 256,
- .pwm_period_ns = 1000000000 / (100 * 256 * 20),
.enable_gpio = -1,
.init = hmt_bl_init,
.notify = hmt_bl_notify,
@@ -268,6 +272,7 @@ static void __init hmt_machine_init(void)
gpio_request(S3C64XX_GPF(13), "usb power");
gpio_direction_output(S3C64XX_GPF(13), 1);
+ pwm_add_table(hmt_pwm_lookup, ARRAY_SIZE(hmt_pwm_lookup));
platform_add_devices(hmt_devices, ARRAY_SIZE(hmt_devices));
}
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index 719843dca510..acdfb5fac40f 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -14,6 +14,7 @@
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/serial_core.h>
#include <linux/serial_s3c.h>
@@ -139,6 +140,11 @@ static struct platform_device smartq_usb_otg_vbus_dev = {
.dev.platform_data = &smartq_usb_otg_vbus_pdata,
};
+static struct pwm_lookup smartq_pwm_lookup[] = {
+ PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL,
+ 1000000000 / (1000 * 20), PWM_POLARITY_NORMAL),
+};
+
static int smartq_bl_init(struct device *dev)
{
s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2));
@@ -147,10 +153,8 @@ static int smartq_bl_init(struct device *dev)
}
static struct platform_pwm_backlight_data smartq_backlight_data = {
- .pwm_id = 1,
.max_brightness = 1000,
.dft_brightness = 600,
- .pwm_period_ns = 1000000000 / (1000 * 20),
.enable_gpio = -1,
.init = smartq_bl_init,
};
@@ -396,5 +400,6 @@ void __init smartq_machine_init(void)
WARN_ON(smartq_usb_host_init());
WARN_ON(smartq_wifi_init());
+ pwm_add_table(smartq_pwm_lookup, ARRAY_SIZE(smartq_pwm_lookup));
platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices));
}
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 286c9bd676e1..30fd27853072 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -30,6 +30,7 @@
#include <linux/smsc911x.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/platform_data/s3c-hsotg.h>
@@ -623,8 +624,12 @@ static struct samsung_bl_gpio_info smdk6410_bl_gpio_info = {
.func = S3C_GPIO_SFN(2),
};
+static struct pwm_lookup smdk6410_pwm_lookup[] = {
+ PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL, 78770,
+ PWM_POLARITY_NORMAL),
+};
+
static struct platform_pwm_backlight_data smdk6410_bl_data = {
- .pwm_id = 1,
.enable_gpio = -1,
};
@@ -695,6 +700,7 @@ static void __init smdk6410_machine_init(void)
platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
+ pwm_add_table(smdk6410_pwm_lookup, ARRAY_SIZE(smdk6410_pwm_lookup));
samsung_bl_set(&smdk6410_bl_gpio_info, &smdk6410_bl_data);
}
diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c
index 424155b0cfe9..46d0a1ddce75 100644
--- a/arch/arm/mach-shmobile/pm-rmobile.c
+++ b/arch/arm/mach-shmobile/pm-rmobile.c
@@ -12,6 +12,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
+#include <linux/clk/shmobile.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/of.h>
@@ -124,36 +125,6 @@ static bool rmobile_pd_active_wakeup(struct device *dev)
return true;
}
-static int rmobile_pd_attach_dev(struct generic_pm_domain *domain,
- struct device *dev)
-{
- int error;
-
- error = pm_clk_create(dev);
- if (error) {
- dev_err(dev, "pm_clk_create failed %d\n", error);
- return error;
- }
-
- error = pm_clk_add(dev, NULL);
- if (error) {
- dev_err(dev, "pm_clk_add failed %d\n", error);
- goto fail;
- }
-
- return 0;
-
-fail:
- pm_clk_destroy(dev);
- return error;
-}
-
-static void rmobile_pd_detach_dev(struct generic_pm_domain *domain,
- struct device *dev)
-{
- pm_clk_destroy(dev);
-}
-
static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd)
{
struct generic_pm_domain *genpd = &rmobile_pd->genpd;
@@ -164,8 +135,8 @@ static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd)
genpd->dev_ops.active_wakeup = rmobile_pd_active_wakeup;
genpd->power_off = rmobile_pd_power_down;
genpd->power_on = rmobile_pd_power_up;
- genpd->attach_dev = rmobile_pd_attach_dev;
- genpd->detach_dev = rmobile_pd_detach_dev;
+ genpd->attach_dev = cpg_mstp_attach_dev;
+ genpd->detach_dev = cpg_mstp_detach_dev;
__rmobile_pd_power_up(rmobile_pd, false);
}
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index 223c9e99380d..c2be98f38e73 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -26,10 +26,11 @@ static const char * const sunxi_board_dt_compat[] = {
"allwinner,sun4i-a10",
"allwinner,sun5i-a10s",
"allwinner,sun5i-a13",
+ "allwinner,sun5i-r8",
NULL,
};
-DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)")
+DT_MACHINE_START(SUNXI_DT, "Allwinner sun4i/sun5i Families")
.dt_compat = sunxi_board_dt_compat,
.init_late = sunxi_dt_cpufreq_init,
MACHINE_END
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index fbe74c6806f3..49d1110cff53 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -39,8 +39,8 @@ static struct platform_device wifi_rfkill_device = {
static struct gpiod_lookup_table wifi_gpio_lookup = {
.dev_id = "rfkill_gpio",
.table = {
- GPIO_LOOKUP_IDX("tegra-gpio", 25, NULL, 0, 0),
- GPIO_LOOKUP_IDX("tegra-gpio", 85, NULL, 1, 0),
+ GPIO_LOOKUP("tegra-gpio", 25, "reset", 0),
+ GPIO_LOOKUP("tegra-gpio", 85, "shutdown", 0),
{ },
},
};
diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile
index 60bd2265f753..1233f9b610bc 100644
--- a/arch/arm/mach-uniphier/Makefile
+++ b/arch/arm/mach-uniphier/Makefile
@@ -1,2 +1,2 @@
obj-y := uniphier.o
-obj-$(CONFIG_SMP) += platsmp.o
+obj-$(CONFIG_SMP) += platsmp.o headsmp.o
diff --git a/arch/arm/mach-uniphier/headsmp.S b/arch/arm/mach-uniphier/headsmp.S
new file mode 100644
index 000000000000..c819dff84546
--- /dev/null
+++ b/arch/arm/mach-uniphier/headsmp.S
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/cp15.h>
+
+ENTRY(uniphier_smp_trampoline)
+ARM_BE8(setend be) @ ensure we are in BE8 mode
+ mrc p15, 0, r0, c0, c0, 5 @ MPIDR (Multiprocessor Affinity Reg)
+ and r2, r0, #0x3 @ CPU ID
+ ldr r1, uniphier_smp_trampoline_jump
+ ldr r3, uniphier_smp_trampoline_poll_addr
+ mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Control Register)
+ orr r0, r0, #CR_I @ Enable ICache
+ bic r0, r0, #(CR_C | CR_M) @ Disable MMU and Dcache
+ mcr p15, 0, r0, c1, c0, 0
+ b 1f @ cache the following 5 instructions
+0: wfe
+1: ldr r0, [r3]
+ cmp r0, r2
+ bxeq r1 @ branch to secondary_startup
+ b 0b
+ .globl uniphier_smp_trampoline_jump
+uniphier_smp_trampoline_jump:
+ .word 0 @ set virt_to_phys(secondary_startup)
+ .globl uniphier_smp_trampoline_poll_addr
+uniphier_smp_trampoline_poll_addr:
+ .word 0 @ set CPU ID to be kicked to this reg
+ .globl uniphier_smp_trampoline_end
+uniphier_smp_trampoline_end:
+ENDPROC(uniphier_smp_trampoline)
diff --git a/arch/arm/mach-uniphier/platsmp.c b/arch/arm/mach-uniphier/platsmp.c
index 4b784f721135..f0577664611c 100644
--- a/arch/arm/mach-uniphier/platsmp.c
+++ b/arch/arm/mach-uniphier/platsmp.c
@@ -12,73 +12,198 @@
* GNU General Public License for more details.
*/
-#include <linux/sizes.h>
-#include <linux/compiler.h>
+#define pr_fmt(fmt) "uniphier: " fmt
+
#include <linux/init.h>
#include <linux/io.h>
-#include <linux/regmap.h>
-#include <linux/mfd/syscon.h>
+#include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/sizes.h>
+#include <asm/cacheflush.h>
+#include <asm/hardware/cache-uniphier.h>
+#include <asm/pgtable.h>
#include <asm/smp.h>
#include <asm/smp_scu.h>
-static struct regmap *sbcm_regmap;
+/*
+ * The secondary CPUs check this register from the boot ROM for the jump
+ * destination. After that, it can be reused as a scratch register.
+ */
+#define UNIPHIER_SBC_ROM_BOOT_RSV2 0x1208
-static void __init uniphier_smp_prepare_cpus(unsigned int max_cpus)
+static void __iomem *uniphier_smp_rom_boot_rsv2;
+static unsigned int uniphier_smp_max_cpus;
+
+extern char uniphier_smp_trampoline;
+extern char uniphier_smp_trampoline_jump;
+extern char uniphier_smp_trampoline_poll_addr;
+extern char uniphier_smp_trampoline_end;
+
+/*
+ * Copy trampoline code to the tail of the 1st section of the page table used
+ * in the boot ROM. This area is directly accessible by the secondary CPUs
+ * for all the UniPhier SoCs.
+ */
+static const phys_addr_t uniphier_smp_trampoline_dest_end = SECTION_SIZE;
+static phys_addr_t uniphier_smp_trampoline_dest;
+
+static int __init uniphier_smp_copy_trampoline(phys_addr_t poll_addr)
{
- static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
- unsigned long scu_base_phys = 0;
- void __iomem *scu_base;
+ size_t trmp_size;
+ static void __iomem *trmp_base;
- sbcm_regmap = syscon_regmap_lookup_by_compatible(
- "socionext,uniphier-system-bus-controller-misc");
- if (IS_ERR(sbcm_regmap)) {
- pr_err("failed to regmap system-bus-controller-misc\n");
- goto err;
+ if (!uniphier_cache_l2_is_enabled()) {
+ pr_warn("outer cache is needed for SMP, but not enabled\n");
+ return -ENODEV;
}
+ uniphier_cache_l2_set_locked_ways(1);
+
+ outer_flush_all();
+
+ trmp_size = &uniphier_smp_trampoline_end - &uniphier_smp_trampoline;
+ uniphier_smp_trampoline_dest = uniphier_smp_trampoline_dest_end -
+ trmp_size;
+
+ uniphier_cache_l2_touch_range(uniphier_smp_trampoline_dest,
+ uniphier_smp_trampoline_dest_end);
+
+ trmp_base = ioremap_cache(uniphier_smp_trampoline_dest, trmp_size);
+ if (!trmp_base) {
+ pr_err("failed to map trampoline destination area\n");
+ return -ENOMEM;
+ }
+
+ memcpy(trmp_base, &uniphier_smp_trampoline, trmp_size);
+
+ writel(virt_to_phys(secondary_startup),
+ trmp_base + (&uniphier_smp_trampoline_jump -
+ &uniphier_smp_trampoline));
+
+ writel(poll_addr, trmp_base + (&uniphier_smp_trampoline_poll_addr -
+ &uniphier_smp_trampoline));
+
+ flush_cache_all(); /* flush out trampoline code to outer cache */
+
+ iounmap(trmp_base);
+
+ return 0;
+}
+
+static int __init uniphier_smp_prepare_trampoline(unsigned int max_cpus)
+{
+ struct device_node *np;
+ struct resource res;
+ phys_addr_t rom_rsv2_phys;
+ int ret;
+
+ np = of_find_compatible_node(NULL, NULL,
+ "socionext,uniphier-system-bus-controller");
+ ret = of_address_to_resource(np, 1, &res);
+ if (ret) {
+ pr_err("failed to get resource of system-bus-controller\n");
+ return ret;
+ }
+
+ rom_rsv2_phys = res.start + UNIPHIER_SBC_ROM_BOOT_RSV2;
+
+ ret = uniphier_smp_copy_trampoline(rom_rsv2_phys);
+ if (ret)
+ return ret;
+
+ uniphier_smp_rom_boot_rsv2 = ioremap(rom_rsv2_phys, sizeof(SZ_4));
+ if (!uniphier_smp_rom_boot_rsv2) {
+ pr_err("failed to map ROM_BOOT_RSV2 register\n");
+ return -ENOMEM;
+ }
+
+ writel(uniphier_smp_trampoline_dest, uniphier_smp_rom_boot_rsv2);
+ asm("sev"); /* Bring up all secondary CPUs to the trampoline code */
+
+ uniphier_smp_max_cpus = max_cpus; /* save for later use */
+
+ return 0;
+}
+
+static void __init uniphier_smp_unprepare_trampoline(void)
+{
+ iounmap(uniphier_smp_rom_boot_rsv2);
+
+ if (uniphier_smp_trampoline_dest)
+ outer_inv_range(uniphier_smp_trampoline_dest,
+ uniphier_smp_trampoline_dest_end);
+
+ uniphier_cache_l2_set_locked_ways(0);
+}
+
+static int __init uniphier_smp_enable_scu(void)
+{
+ unsigned long scu_base_phys = 0;
+ void __iomem *scu_base;
+
if (scu_a9_has_base())
scu_base_phys = scu_a9_get_base();
if (!scu_base_phys) {
pr_err("failed to get scu base\n");
- goto err;
+ return -ENODEV;
}
scu_base = ioremap(scu_base_phys, SZ_128);
if (!scu_base) {
- pr_err("failed to remap scu base (0x%08lx)\n", scu_base_phys);
- goto err;
+ pr_err("failed to map scu base\n");
+ return -ENOMEM;
}
scu_enable(scu_base);
iounmap(scu_base);
+ return 0;
+}
+
+static void __init uniphier_smp_prepare_cpus(unsigned int max_cpus)
+{
+ static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
+ int ret;
+
+ ret = uniphier_smp_prepare_trampoline(max_cpus);
+ if (ret)
+ goto err;
+
+ ret = uniphier_smp_enable_scu();
+ if (ret)
+ goto err;
+
return;
err:
pr_warn("disabling SMP\n");
init_cpu_present(&only_cpu_0);
- sbcm_regmap = NULL;
+ uniphier_smp_unprepare_trampoline();
}
-static int uniphier_boot_secondary(unsigned int cpu,
- struct task_struct *idle)
+static int __init uniphier_smp_boot_secondary(unsigned int cpu,
+ struct task_struct *idle)
{
- int ret;
+ if (WARN_ON_ONCE(!uniphier_smp_rom_boot_rsv2))
+ return -EFAULT;
- if (!sbcm_regmap)
- return -ENODEV;
+ writel(cpu, uniphier_smp_rom_boot_rsv2);
+ readl(uniphier_smp_rom_boot_rsv2); /* relax */
- ret = regmap_write(sbcm_regmap, 0x1208,
- virt_to_phys(secondary_startup));
- if (!ret)
- asm("sev"); /* wake up secondary CPU */
+ asm("sev"); /* wake up secondary CPUs sleeping in the trampoline */
+
+ if (cpu == uniphier_smp_max_cpus - 1) {
+ /* clean up resources if this is the last CPU */
+ uniphier_smp_unprepare_trampoline();
+ }
- return ret;
+ return 0;
}
-struct smp_operations uniphier_smp_ops __initdata = {
+static struct smp_operations uniphier_smp_ops __initdata = {
.smp_prepare_cpus = uniphier_smp_prepare_cpus,
- .smp_boot_secondary = uniphier_boot_secondary,
+ .smp_boot_secondary = uniphier_smp_boot_secondary,
};
CPU_METHOD_OF_DECLARE(uniphier_smp, "socionext,uniphier-smp",
&uniphier_smp_ops);
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index c21941349b3e..41218867a9a6 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -974,6 +974,16 @@ config CACHE_TAUROS2
This option enables the Tauros2 L2 cache controller (as
found on PJ1/PJ4).
+config CACHE_UNIPHIER
+ bool "Enable the UniPhier outer cache controller"
+ depends on ARCH_UNIPHIER
+ default y
+ select OUTER_CACHE
+ select OUTER_CACHE_SYNC
+ help
+ This option enables the UniPhier outer cache (system cache)
+ controller.
+
config CACHE_XSC3L2
bool "Enable the L2 cache on XScale3"
depends on CPU_XSC3
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 57c8df500e8c..7f76d96ce546 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -103,3 +103,4 @@ obj-$(CONFIG_CACHE_FEROCEON_L2) += cache-feroceon-l2.o
obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o l2c-l2x0-resume.o
obj-$(CONFIG_CACHE_XSC3L2) += cache-xsc3l2.o
obj-$(CONFIG_CACHE_TAUROS2) += cache-tauros2.o
+obj-$(CONFIG_CACHE_UNIPHIER) += cache-uniphier.o
diff --git a/arch/arm/mm/cache-uniphier.c b/arch/arm/mm/cache-uniphier.c
new file mode 100644
index 000000000000..0502ba17a3ab
--- /dev/null
+++ b/arch/arm/mm/cache-uniphier.c
@@ -0,0 +1,555 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) "uniphier: " fmt
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/log2.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <asm/hardware/cache-uniphier.h>
+#include <asm/outercache.h>
+
+/* control registers */
+#define UNIPHIER_SSCC 0x0 /* Control Register */
+#define UNIPHIER_SSCC_BST BIT(20) /* UCWG burst read */
+#define UNIPHIER_SSCC_ACT BIT(19) /* Inst-Data separate */
+#define UNIPHIER_SSCC_WTG BIT(18) /* WT gathering on */
+#define UNIPHIER_SSCC_PRD BIT(17) /* enable pre-fetch */
+#define UNIPHIER_SSCC_ON BIT(0) /* enable cache */
+#define UNIPHIER_SSCLPDAWCR 0x30 /* Unified/Data Active Way Control */
+#define UNIPHIER_SSCLPIAWCR 0x34 /* Instruction Active Way Control */
+
+/* revision registers */
+#define UNIPHIER_SSCID 0x0 /* ID Register */
+
+/* operation registers */
+#define UNIPHIER_SSCOPE 0x244 /* Cache Operation Primitive Entry */
+#define UNIPHIER_SSCOPE_CM_INV 0x0 /* invalidate */
+#define UNIPHIER_SSCOPE_CM_CLEAN 0x1 /* clean */
+#define UNIPHIER_SSCOPE_CM_FLUSH 0x2 /* flush */
+#define UNIPHIER_SSCOPE_CM_SYNC 0x8 /* sync (drain bufs) */
+#define UNIPHIER_SSCOPE_CM_FLUSH_PREFETCH 0x9 /* flush p-fetch buf */
+#define UNIPHIER_SSCOQM 0x248 /* Cache Operation Queue Mode */
+#define UNIPHIER_SSCOQM_TID_MASK (0x3 << 21)
+#define UNIPHIER_SSCOQM_TID_LRU_DATA (0x0 << 21)
+#define UNIPHIER_SSCOQM_TID_LRU_INST (0x1 << 21)
+#define UNIPHIER_SSCOQM_TID_WAY (0x2 << 21)
+#define UNIPHIER_SSCOQM_S_MASK (0x3 << 17)
+#define UNIPHIER_SSCOQM_S_RANGE (0x0 << 17)
+#define UNIPHIER_SSCOQM_S_ALL (0x1 << 17)
+#define UNIPHIER_SSCOQM_S_WAY (0x2 << 17)
+#define UNIPHIER_SSCOQM_CE BIT(15) /* notify completion */
+#define UNIPHIER_SSCOQM_CM_INV 0x0 /* invalidate */
+#define UNIPHIER_SSCOQM_CM_CLEAN 0x1 /* clean */
+#define UNIPHIER_SSCOQM_CM_FLUSH 0x2 /* flush */
+#define UNIPHIER_SSCOQM_CM_PREFETCH 0x3 /* prefetch to cache */
+#define UNIPHIER_SSCOQM_CM_PREFETCH_BUF 0x4 /* prefetch to pf-buf */
+#define UNIPHIER_SSCOQM_CM_TOUCH 0x5 /* touch */
+#define UNIPHIER_SSCOQM_CM_TOUCH_ZERO 0x6 /* touch to zero */
+#define UNIPHIER_SSCOQM_CM_TOUCH_DIRTY 0x7 /* touch with dirty */
+#define UNIPHIER_SSCOQAD 0x24c /* Cache Operation Queue Address */
+#define UNIPHIER_SSCOQSZ 0x250 /* Cache Operation Queue Size */
+#define UNIPHIER_SSCOQMASK 0x254 /* Cache Operation Queue Address Mask */
+#define UNIPHIER_SSCOQWN 0x258 /* Cache Operation Queue Way Number */
+#define UNIPHIER_SSCOPPQSEF 0x25c /* Cache Operation Queue Set Complete*/
+#define UNIPHIER_SSCOPPQSEF_FE BIT(1)
+#define UNIPHIER_SSCOPPQSEF_OE BIT(0)
+#define UNIPHIER_SSCOLPQS 0x260 /* Cache Operation Queue Status */
+#define UNIPHIER_SSCOLPQS_EF BIT(2)
+#define UNIPHIER_SSCOLPQS_EST BIT(1)
+#define UNIPHIER_SSCOLPQS_QST BIT(0)
+
+/* Is the touch/pre-fetch destination specified by ways? */
+#define UNIPHIER_SSCOQM_TID_IS_WAY(op) \
+ ((op & UNIPHIER_SSCOQM_TID_MASK) == UNIPHIER_SSCOQM_TID_WAY)
+/* Is the operation region specified by address range? */
+#define UNIPHIER_SSCOQM_S_IS_RANGE(op) \
+ ((op & UNIPHIER_SSCOQM_S_MASK) == UNIPHIER_SSCOQM_S_RANGE)
+
+/**
+ * uniphier_cache_data - UniPhier outer cache specific data
+ *
+ * @ctrl_base: virtual base address of control registers
+ * @rev_base: virtual base address of revision registers
+ * @op_base: virtual base address of operation registers
+ * @way_present_mask: each bit specifies if the way is present
+ * @way_locked_mask: each bit specifies if the way is locked
+ * @nsets: number of associativity sets
+ * @line_size: line size in bytes
+ * @range_op_max_size: max size that can be handled by a single range operation
+ * @list: list node to include this level in the whole cache hierarchy
+ */
+struct uniphier_cache_data {
+ void __iomem *ctrl_base;
+ void __iomem *rev_base;
+ void __iomem *op_base;
+ u32 way_present_mask;
+ u32 way_locked_mask;
+ u32 nsets;
+ u32 line_size;
+ u32 range_op_max_size;
+ struct list_head list;
+};
+
+/*
+ * List of the whole outer cache hierarchy. This list is only modified during
+ * the early boot stage, so no mutex is taken for the access to the list.
+ */
+static LIST_HEAD(uniphier_cache_list);
+
+/**
+ * __uniphier_cache_sync - perform a sync point for a particular cache level
+ *
+ * @data: cache controller specific data
+ */
+static void __uniphier_cache_sync(struct uniphier_cache_data *data)
+{
+ /* This sequence need not be atomic. Do not disable IRQ. */
+ writel_relaxed(UNIPHIER_SSCOPE_CM_SYNC,
+ data->op_base + UNIPHIER_SSCOPE);
+ /* need a read back to confirm */
+ readl_relaxed(data->op_base + UNIPHIER_SSCOPE);
+}
+
+/**
+ * __uniphier_cache_maint_common - run a queue operation for a particular level
+ *
+ * @data: cache controller specific data
+ * @start: start address of range operation (don't care for "all" operation)
+ * @size: data size of range operation (don't care for "all" operation)
+ * @operation: flags to specify the desired cache operation
+ */
+static void __uniphier_cache_maint_common(struct uniphier_cache_data *data,
+ unsigned long start,
+ unsigned long size,
+ u32 operation)
+{
+ unsigned long flags;
+
+ /*
+ * No spin lock is necessary here because:
+ *
+ * [1] This outer cache controller is able to accept maintenance
+ * operations from multiple CPUs at a time in an SMP system; if a
+ * maintenance operation is under way and another operation is issued,
+ * the new one is stored in the queue. The controller performs one
+ * operation after another. If the queue is full, the status register,
+ * UNIPHIER_SSCOPPQSEF, indicates that the queue registration has
+ * failed. The status registers, UNIPHIER_{SSCOPPQSEF, SSCOLPQS}, have
+ * different instances for each CPU, i.e. each CPU can track the status
+ * of the maintenance operations triggered by itself.
+ *
+ * [2] The cache command registers, UNIPHIER_{SSCOQM, SSCOQAD, SSCOQSZ,
+ * SSCOQWN}, are shared between multiple CPUs, but the hardware still
+ * guarantees the registration sequence is atomic; the write access to
+ * them are arbitrated by the hardware. The first accessor to the
+ * register, UNIPHIER_SSCOQM, holds the access right and it is released
+ * by reading the status register, UNIPHIER_SSCOPPQSEF. While one CPU
+ * is holding the access right, other CPUs fail to register operations.
+ * One CPU should not hold the access right for a long time, so local
+ * IRQs should be disabled while the following sequence.
+ */
+ local_irq_save(flags);
+
+ /* clear the complete notification flag */
+ writel_relaxed(UNIPHIER_SSCOLPQS_EF, data->op_base + UNIPHIER_SSCOLPQS);
+
+ do {
+ /* set cache operation */
+ writel_relaxed(UNIPHIER_SSCOQM_CE | operation,
+ data->op_base + UNIPHIER_SSCOQM);
+
+ /* set address range if needed */
+ if (likely(UNIPHIER_SSCOQM_S_IS_RANGE(operation))) {
+ writel_relaxed(start, data->op_base + UNIPHIER_SSCOQAD);
+ writel_relaxed(size, data->op_base + UNIPHIER_SSCOQSZ);
+ }
+
+ /* set target ways if needed */
+ if (unlikely(UNIPHIER_SSCOQM_TID_IS_WAY(operation)))
+ writel_relaxed(data->way_locked_mask,
+ data->op_base + UNIPHIER_SSCOQWN);
+ } while (unlikely(readl_relaxed(data->op_base + UNIPHIER_SSCOPPQSEF) &
+ (UNIPHIER_SSCOPPQSEF_FE | UNIPHIER_SSCOPPQSEF_OE)));
+
+ /* wait until the operation is completed */
+ while (likely(readl_relaxed(data->op_base + UNIPHIER_SSCOLPQS) !=
+ UNIPHIER_SSCOLPQS_EF))
+ cpu_relax();
+
+ local_irq_restore(flags);
+}
+
+static void __uniphier_cache_maint_all(struct uniphier_cache_data *data,
+ u32 operation)
+{
+ __uniphier_cache_maint_common(data, 0, 0,
+ UNIPHIER_SSCOQM_S_ALL | operation);
+
+ __uniphier_cache_sync(data);
+}
+
+static void __uniphier_cache_maint_range(struct uniphier_cache_data *data,
+ unsigned long start, unsigned long end,
+ u32 operation)
+{
+ unsigned long size;
+
+ /*
+ * If the start address is not aligned,
+ * perform a cache operation for the first cache-line
+ */
+ start = start & ~(data->line_size - 1);
+
+ size = end - start;
+
+ if (unlikely(size >= (unsigned long)(-data->line_size))) {
+ /* this means cache operation for all range */
+ __uniphier_cache_maint_all(data, operation);
+ return;
+ }
+
+ /*
+ * If the end address is not aligned,
+ * perform a cache operation for the last cache-line
+ */
+ size = ALIGN(size, data->line_size);
+
+ while (size) {
+ unsigned long chunk_size = min_t(unsigned long, size,
+ data->range_op_max_size);
+
+ __uniphier_cache_maint_common(data, start, chunk_size,
+ UNIPHIER_SSCOQM_S_RANGE | operation);
+
+ start += chunk_size;
+ size -= chunk_size;
+ }
+
+ __uniphier_cache_sync(data);
+}
+
+static void __uniphier_cache_enable(struct uniphier_cache_data *data, bool on)
+{
+ u32 val = 0;
+
+ if (on)
+ val = UNIPHIER_SSCC_WTG | UNIPHIER_SSCC_PRD | UNIPHIER_SSCC_ON;
+
+ writel_relaxed(val, data->ctrl_base + UNIPHIER_SSCC);
+}
+
+static void __init __uniphier_cache_set_locked_ways(
+ struct uniphier_cache_data *data,
+ u32 way_mask)
+{
+ data->way_locked_mask = way_mask & data->way_present_mask;
+
+ writel_relaxed(~data->way_locked_mask & data->way_present_mask,
+ data->ctrl_base + UNIPHIER_SSCLPDAWCR);
+}
+
+static void uniphier_cache_maint_range(unsigned long start, unsigned long end,
+ u32 operation)
+{
+ struct uniphier_cache_data *data;
+
+ list_for_each_entry(data, &uniphier_cache_list, list)
+ __uniphier_cache_maint_range(data, start, end, operation);
+}
+
+static void uniphier_cache_maint_all(u32 operation)
+{
+ struct uniphier_cache_data *data;
+
+ list_for_each_entry(data, &uniphier_cache_list, list)
+ __uniphier_cache_maint_all(data, operation);
+}
+
+static void uniphier_cache_inv_range(unsigned long start, unsigned long end)
+{
+ uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_INV);
+}
+
+static void uniphier_cache_clean_range(unsigned long start, unsigned long end)
+{
+ uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_CLEAN);
+}
+
+static void uniphier_cache_flush_range(unsigned long start, unsigned long end)
+{
+ uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_FLUSH);
+}
+
+static void __init uniphier_cache_inv_all(void)
+{
+ uniphier_cache_maint_all(UNIPHIER_SSCOQM_CM_INV);
+}
+
+static void uniphier_cache_flush_all(void)
+{
+ uniphier_cache_maint_all(UNIPHIER_SSCOQM_CM_FLUSH);
+}
+
+static void uniphier_cache_disable(void)
+{
+ struct uniphier_cache_data *data;
+
+ list_for_each_entry_reverse(data, &uniphier_cache_list, list)
+ __uniphier_cache_enable(data, false);
+
+ uniphier_cache_flush_all();
+}
+
+static void __init uniphier_cache_enable(void)
+{
+ struct uniphier_cache_data *data;
+
+ uniphier_cache_inv_all();
+
+ list_for_each_entry(data, &uniphier_cache_list, list) {
+ __uniphier_cache_enable(data, true);
+ __uniphier_cache_set_locked_ways(data, 0);
+ }
+}
+
+static void uniphier_cache_sync(void)
+{
+ struct uniphier_cache_data *data;
+
+ list_for_each_entry(data, &uniphier_cache_list, list)
+ __uniphier_cache_sync(data);
+}
+
+int __init uniphier_cache_l2_is_enabled(void)
+{
+ struct uniphier_cache_data *data;
+
+ data = list_first_entry_or_null(&uniphier_cache_list,
+ struct uniphier_cache_data, list);
+ if (!data)
+ return 0;
+
+ return !!(readl_relaxed(data->ctrl_base + UNIPHIER_SSCC) &
+ UNIPHIER_SSCC_ON);
+}
+
+void __init uniphier_cache_l2_touch_range(unsigned long start,
+ unsigned long end)
+{
+ struct uniphier_cache_data *data;
+
+ data = list_first_entry_or_null(&uniphier_cache_list,
+ struct uniphier_cache_data, list);
+ if (data)
+ __uniphier_cache_maint_range(data, start, end,
+ UNIPHIER_SSCOQM_TID_WAY |
+ UNIPHIER_SSCOQM_CM_TOUCH);
+}
+
+void __init uniphier_cache_l2_set_locked_ways(u32 way_mask)
+{
+ struct uniphier_cache_data *data;
+
+ data = list_first_entry_or_null(&uniphier_cache_list,
+ struct uniphier_cache_data, list);
+ if (data)
+ __uniphier_cache_set_locked_ways(data, way_mask);
+}
+
+static const struct of_device_id uniphier_cache_match[] __initconst = {
+ {
+ .compatible = "socionext,uniphier-system-cache",
+ },
+ { /* sentinel */ }
+};
+
+static struct device_node * __init uniphier_cache_get_next_level_node(
+ struct device_node *np)
+{
+ u32 phandle;
+
+ if (of_property_read_u32(np, "next-level-cache", &phandle))
+ return NULL;
+
+ return of_find_node_by_phandle(phandle);
+}
+
+static int __init __uniphier_cache_init(struct device_node *np,
+ unsigned int *cache_level)
+{
+ struct uniphier_cache_data *data;
+ u32 level, cache_size;
+ struct device_node *next_np;
+ int ret = 0;
+
+ if (!of_match_node(uniphier_cache_match, np)) {
+ pr_err("L%d: not compatible with uniphier cache\n",
+ *cache_level);
+ return -EINVAL;
+ }
+
+ if (of_property_read_u32(np, "cache-level", &level)) {
+ pr_err("L%d: cache-level is not specified\n", *cache_level);
+ return -EINVAL;
+ }
+
+ if (level != *cache_level) {
+ pr_err("L%d: cache-level is unexpected value %d\n",
+ *cache_level, level);
+ return -EINVAL;
+ }
+
+ if (!of_property_read_bool(np, "cache-unified")) {
+ pr_err("L%d: cache-unified is not specified\n", *cache_level);
+ return -EINVAL;
+ }
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ if (of_property_read_u32(np, "cache-line-size", &data->line_size) ||
+ !is_power_of_2(data->line_size)) {
+ pr_err("L%d: cache-line-size is unspecified or invalid\n",
+ *cache_level);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ if (of_property_read_u32(np, "cache-sets", &data->nsets) ||
+ !is_power_of_2(data->nsets)) {
+ pr_err("L%d: cache-sets is unspecified or invalid\n",
+ *cache_level);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ if (of_property_read_u32(np, "cache-size", &cache_size) ||
+ cache_size == 0 || cache_size % (data->nsets * data->line_size)) {
+ pr_err("L%d: cache-size is unspecified or invalid\n",
+ *cache_level);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ data->way_present_mask =
+ ((u32)1 << cache_size / data->nsets / data->line_size) - 1;
+
+ data->ctrl_base = of_iomap(np, 0);
+ if (!data->ctrl_base) {
+ pr_err("L%d: failed to map control register\n", *cache_level);
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ data->rev_base = of_iomap(np, 1);
+ if (!data->rev_base) {
+ pr_err("L%d: failed to map revision register\n", *cache_level);
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ data->op_base = of_iomap(np, 2);
+ if (!data->op_base) {
+ pr_err("L%d: failed to map operation register\n", *cache_level);
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ if (*cache_level == 2) {
+ u32 revision = readl(data->rev_base + UNIPHIER_SSCID);
+ /*
+ * The size of range operation is limited to (1 << 22) or less
+ * for PH-sLD8 or older SoCs.
+ */
+ if (revision <= 0x16)
+ data->range_op_max_size = (u32)1 << 22;
+ }
+
+ data->range_op_max_size -= data->line_size;
+
+ INIT_LIST_HEAD(&data->list);
+ list_add_tail(&data->list, &uniphier_cache_list); /* no mutex */
+
+ /*
+ * OK, this level has been successfully initialized. Look for the next
+ * level cache. Do not roll back even if the initialization of the
+ * next level cache fails because we want to continue with available
+ * cache levels.
+ */
+ next_np = uniphier_cache_get_next_level_node(np);
+ if (next_np) {
+ (*cache_level)++;
+ ret = __uniphier_cache_init(next_np, cache_level);
+ }
+ of_node_put(next_np);
+
+ return ret;
+err:
+ iounmap(data->op_base);
+ iounmap(data->rev_base);
+ iounmap(data->ctrl_base);
+ kfree(data);
+
+ return ret;
+}
+
+int __init uniphier_cache_init(void)
+{
+ struct device_node *np = NULL;
+ unsigned int cache_level;
+ int ret = 0;
+
+ /* look for level 2 cache */
+ while ((np = of_find_matching_node(np, uniphier_cache_match)))
+ if (!of_property_read_u32(np, "cache-level", &cache_level) &&
+ cache_level == 2)
+ break;
+
+ if (!np)
+ return -ENODEV;
+
+ ret = __uniphier_cache_init(np, &cache_level);
+ of_node_put(np);
+
+ if (ret) {
+ /*
+ * Error out iif L2 initialization fails. Continue with any
+ * error on L3 or outer because they are optional.
+ */
+ if (cache_level == 2) {
+ pr_err("failed to initialize L2 cache\n");
+ return ret;
+ }
+
+ cache_level--;
+ ret = 0;
+ }
+
+ outer_cache.inv_range = uniphier_cache_inv_range;
+ outer_cache.clean_range = uniphier_cache_clean_range;
+ outer_cache.flush_range = uniphier_cache_flush_range;
+ outer_cache.flush_all = uniphier_cache_flush_all;
+ outer_cache.disable = uniphier_cache_disable;
+ outer_cache.sync = uniphier_cache_sync;
+
+ uniphier_cache_enable();
+
+ pr_info("enabled outer cache (cache level: %d)\n", cache_level);
+
+ return ret;
+}
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 23800a19a7bc..c6e2c75c04fc 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -7,6 +7,7 @@ config ARCH_BCM_IPROC
config ARCH_BERLIN
bool "Marvell Berlin SoC Family"
+ select ARCH_REQUIRE_GPIOLIB
select DW_APB_ICTL
help
This enables support for Marvell Berlin SoC Family