summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/Kconfig1
-rw-r--r--arch/arm/boot/dts/kirkwood-dreamplug.dts25
-rw-r--r--arch/arm/boot/dts/kirkwood.dtsi6
-rw-r--r--arch/arm/boot/dts/tegra-paz00.dts26
-rw-r--r--arch/arm/configs/tegra_defconfig33
-rw-r--r--arch/arm/mach-exynos/Kconfig10
-rw-r--r--arch/arm/mach-exynos/mach-nuri.c80
-rw-r--r--arch/arm/mach-exynos/mach-origen.c37
-rw-r--r--arch/arm/mach-exynos/mach-smdkv310.c3
-rw-r--r--arch/arm/mach-exynos/mach-universal_c210.c80
-rw-r--r--arch/arm/mach-imx/Kconfig5
-rw-r--r--arch/arm/mach-imx/mach-imx27_visstrim_m10.c139
-rw-r--r--arch/arm/mach-imx/mach-mx31moboard.c4
-rw-r--r--arch/arm/mach-imx/mach-mx35_3ds.c216
-rw-r--r--arch/arm/mach-kirkwood/Kconfig14
-rw-r--r--arch/arm/mach-kirkwood/Makefile1
-rw-r--r--arch/arm/mach-kirkwood/Makefile.boot2
-rw-r--r--arch/arm/mach-kirkwood/board-dt.c180
-rw-r--r--arch/arm/mach-mmp/mmp2.c1
-rw-r--r--arch/arm/mach-mmp/pxa168.c1
-rw-r--r--arch/arm/mach-mmp/pxa910.c1
-rw-r--r--arch/arm/mach-mxs/Kconfig16
-rw-r--r--arch/arm/mach-mxs/Makefile1
-rw-r--r--arch/arm/mach-mxs/include/mach/digctl.h1
-rw-r--r--arch/arm/mach-mxs/include/mach/mxs.h29
-rw-r--r--arch/arm/mach-mxs/include/mach/uncompress.h13
-rw-r--r--arch/arm/mach-mxs/mach-apx4devkit.c260
-rw-r--r--arch/arm/mach-mxs/mach-m28evk.c7
-rw-r--r--arch/arm/mach-mxs/mach-mx28evk.c80
-rw-r--r--arch/arm/mach-omap1/Kconfig4
-rw-r--r--arch/arm/mach-omap1/board-ams-delta.c314
-rw-r--r--arch/arm/mach-omap2/Kconfig3
-rw-r--r--arch/arm/mach-omap2/Makefile3
-rw-r--r--arch/arm/mach-omap2/am35xx-emac.c117
-rw-r--r--arch/arm/mach-omap2/am35xx-emac.h15
-rw-r--r--arch/arm/mach-omap2/board-4430sdp.c5
-rw-r--r--arch/arm/mach-omap2/board-am3517evm.c117
-rw-r--r--arch/arm/mach-omap2/board-cm-t3517.c2
-rw-r--r--arch/arm/mach-omap2/board-omap3logic.c2
-rw-r--r--arch/arm/mach-omap2/board-omap3pandora.c11
-rw-r--r--arch/arm/mach-omap2/board-omap4panda.c6
-rw-r--r--arch/arm/mach-omap2/board-rm680.c14
-rw-r--r--arch/arm/mach-omap2/board-rx51-peripherals.c25
-rw-r--r--arch/arm/mach-pxa/hx4700.c44
-rw-r--r--arch/arm/mach-pxa/include/mach/mfp-pxa27x.h2
-rw-r--r--arch/arm/mach-s3c64xx/Kconfig1
-rw-r--r--arch/arm/mach-s3c64xx/mach-crag6410-module.c31
-rw-r--r--arch/arm/mach-s3c64xx/mach-crag6410.c67
-rw-r--r--arch/arm/mach-s5pv210/Kconfig9
-rw-r--r--arch/arm/mach-s5pv210/clock.c5
-rw-r--r--arch/arm/mach-s5pv210/include/mach/map.h4
-rw-r--r--arch/arm/mach-s5pv210/mach-aquila.c1
-rw-r--r--arch/arm/mach-s5pv210/mach-smdkc110.c14
-rw-r--r--arch/arm/mach-s5pv210/mach-smdkv210.c15
-rw-r--r--arch/arm/mach-tegra/board-dt-tegra20.c6
-rw-r--r--arch/arm/mach-tegra/board-dt-tegra30.c2
-rw-r--r--arch/arm/mach-tegra/board-harmony-power.c3
-rw-r--r--arch/arm/plat-omap/include/plat/board-ams-delta.h49
-rw-r--r--arch/arm/plat-omap/include/plat/uncompress.h1
59 files changed, 1822 insertions, 342 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index dae718ab1d66..c941fd06b2af 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1583,6 +1583,7 @@ config ARCH_NR_GPIO
int
default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
default 355 if ARCH_U8500
+ default 264 if MACH_H4700
default 0
help
Maximum number of GPIOs in the system.
diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts
new file mode 100644
index 000000000000..8a5dff807b45
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts
@@ -0,0 +1,25 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+ model = "Globalscale Technologies Dreamplug";
+ compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ };
+
+ serial@f1012000 {
+ compatible = "ns16550a";
+ reg = <0xf1012000 0xff>;
+ reg-shift = <2>;
+ interrupts = <33>;
+ clock-frequency = <200000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
new file mode 100644
index 000000000000..771c6bbeb29a
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -0,0 +1,6 @@
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "marvell,kirkwood";
+};
+
diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts
index 825d2957da0b..61f385809970 100644
--- a/arch/arm/boot/dts/tegra-paz00.dts
+++ b/arch/arm/boot/dts/tegra-paz00.dts
@@ -35,6 +35,11 @@
i2c@7000d000 {
clock-frequency = <400000>;
+
+ adt7461@4c {
+ compatible = "adi,adt7461";
+ reg = <0x4c>;
+ };
};
serial@70006000 {
@@ -74,4 +79,25 @@
sdhci@c8000600 {
support-8bit;
};
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power";
+ gpios = <&gpio 79 1>; /* gpio PJ7, active low */
+ linux,code = <116>; /* KEY_POWER */
+ gpio-key,wakeup;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ wifi {
+ label = "wifi-led";
+ gpios = <&gpio 24 0>;
+ linux,default-trigger = "rfkill0";
+ };
+ };
};
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index fd5d3041d717..351d6708c3ae 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -11,11 +11,14 @@ CONFIG_RT_GROUP_SCHED=y
CONFIG_BLK_DEV_INITRD=y
# CONFIG_ELF_CORE is not set
CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_EFI_PARTITION=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_TEGRA=y
@@ -27,18 +30,20 @@ CONFIG_MACH_PAZ00=y
CONFIG_MACH_TRIMSLICE=y
CONFIG_MACH_WARIO=y
CONFIG_MACH_VENTANA=y
-CONFIG_TEGRA_DEBUG_UARTD=y
-CONFIG_ARM_ERRATA_742230=y
+CONFIG_TEGRA_EMC_SCALING_ENABLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_SMP=y
-CONFIG_NR_CPUS=2
CONFIG_PREEMPT=y
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
CONFIG_HIGHMEM=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_IDLE=y
CONFIG_VFP=y
CONFIG_NET=y
CONFIG_PACKET=y
@@ -68,7 +73,6 @@ CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
-CONFIG_MISC_DEVICES=y
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
CONFIG_ICS932S401=y
@@ -76,6 +80,7 @@ CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
@@ -85,8 +90,7 @@ CONFIG_USB_USBNET=y
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
# CONFIG_WLAN is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
+CONFIG_INPUT_EVDEV=y
# CONFIG_VT is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
@@ -96,13 +100,15 @@ CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
# CONFIG_I2C_COMPAT is not set
-# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_TEGRA=y
CONFIG_SPI=y
CONFIG_SPI_TEGRA=y
CONFIG_SENSORS_LM90=y
CONFIG_MFD_TPS6586X=y
CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
+CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_TPS6586X=y
CONFIG_SOUND=y
CONFIG_SND=y
@@ -116,11 +122,13 @@ CONFIG_SND_SOC=y
CONFIG_SND_SOC_TEGRA=y
CONFIG_SND_SOC_TEGRA_WM8903=y
CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
+CONFIG_SND_SOC_TEGRA_ALC5632=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_TEGRA=y
CONFIG_USB_STORAGE=y
CONFIG_MMC=y
+CONFIG_MMC_BLOCK_MINORS=16
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_TEGRA=y
@@ -130,6 +138,11 @@ CONFIG_STAGING=y
CONFIG_IIO=y
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_AK8975=y
+CONFIG_MFD_NVEC=y
+CONFIG_KEYBOARD_NVEC=y
+CONFIG_SERIO_NVEC_PS2=y
+CONFIG_TEGRA_IOMMU_GART=y
+CONFIG_TEGRA_IOMMU_SMMU=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
@@ -138,13 +151,12 @@ CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
# CONFIG_DNOTIFY is not set
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_EFI_PARTITION=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
@@ -162,9 +174,8 @@ CONFIG_DEBUG_SG=y
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y
CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_TWOFISH=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_TEGRA_AES=y
CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index dfad6538b273..98997c2da262 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -179,7 +179,9 @@ config MACH_SMDKV310
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_FIMC3
+ select S5P_DEV_G2D
select S5P_DEV_I2C_HDMIPHY
+ select S5P_DEV_JPEG
select S5P_DEV_MFC
select S5P_DEV_TV
select S5P_DEV_USB_EHCI
@@ -225,7 +227,9 @@ config MACH_UNIVERSAL_C210
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_FIMC3
+ select S5P_DEV_G2D
select S5P_DEV_CSIS0
+ select S5P_DEV_JPEG
select S5P_DEV_FIMD0
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
@@ -262,11 +266,14 @@ config MACH_NURI
select S3C_DEV_I2C1
select S3C_DEV_I2C3
select S3C_DEV_I2C5
+ select S3C_DEV_I2C6
select S5P_DEV_CSIS0
+ select S5P_DEV_JPEG
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_FIMC3
+ select S5P_DEV_G2D
select S5P_DEV_MFC
select S5P_DEV_USB_EHCI
select S5P_SETUP_MIPIPHY
@@ -276,6 +283,7 @@ config MACH_NURI
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C5
+ select EXYNOS4_SETUP_I2C6
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select S5P_SETUP_MIPIPHY
@@ -296,7 +304,9 @@ config MACH_ORIGEN
select S5P_DEV_FIMC2
select S5P_DEV_FIMC3
select S5P_DEV_FIMD0
+ select S5P_DEV_G2D
select S5P_DEV_I2C_HDMIPHY
+ select S5P_DEV_JPEG
select S5P_DEV_MFC
select S5P_DEV_TV
select S5P_DEV_USB_EHCI
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index aa37179d776c..191f5c675fe1 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -28,6 +28,7 @@
#include <video/platform_lcd.h>
#include <media/m5mols.h>
+#include <media/s5k6aa.h>
#include <media/s5p_fimc.h>
#include <media/v4l2-mediabus.h>
@@ -75,6 +76,7 @@ enum fixed_regulator_id {
FIXED_REG_ID_MAX8903,
FIXED_REG_ID_CAM_A28V,
FIXED_REG_ID_CAM_12V,
+ FIXED_REG_ID_CAM_VT_15V,
};
static struct s3c2410_uartcfg nuri_uartcfgs[] __initdata = {
@@ -399,6 +401,9 @@ static struct regulator_consumer_supply __initdata max8997_ldo4_[] = {
static struct regulator_consumer_supply __initdata max8997_ldo5_[] = {
REGULATOR_SUPPLY("vhsic", "modemctl"), /* MODEM */
};
+static struct regulator_consumer_supply nuri_max8997_ldo6_consumer[] = {
+ REGULATOR_SUPPLY("vdd_reg", "6-003c"), /* S5K6AA camera */
+};
static struct regulator_consumer_supply __initdata max8997_ldo7_[] = {
REGULATOR_SUPPLY("dig_18", "0-001f"), /* HCD803 */
};
@@ -431,7 +436,7 @@ static struct regulator_consumer_supply __initdata max8997_buck1_[] = {
REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */
};
static struct regulator_consumer_supply __initdata max8997_buck2_[] = {
- REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */
+ REGULATOR_SUPPLY("vdd_int", "exynos4210-busfreq.0"), /* CPUFREQ */
};
static struct regulator_consumer_supply __initdata max8997_buck3_[] = {
REGULATOR_SUPPLY("vdd", "mali_dev.0"), /* G3D of Exynos 4 */
@@ -546,6 +551,8 @@ static struct regulator_init_data __initdata max8997_ldo6_data = {
.enabled = 1,
},
},
+ .num_consumer_supplies = ARRAY_SIZE(nuri_max8997_ldo6_consumer),
+ .consumer_supplies = nuri_max8997_ldo6_consumer,
};
static struct regulator_init_data __initdata max8997_ldo7_data = {
@@ -742,7 +749,7 @@ static struct regulator_init_data __initdata max8997_buck2_data = {
.constraints = {
.name = "VINT_1.1V_C210",
.min_uV = 900000,
- .max_uV = 1100000,
+ .max_uV = 1200000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
.always_on = 1,
.state_mem = {
@@ -957,7 +964,6 @@ static struct max8997_platform_data __initdata nuri_max8997_pdata = {
.regulators = nuri_max8997_regulators,
.buck125_gpios = { EXYNOS4_GPX0(5), EXYNOS4_GPX0(6), EXYNOS4_GPL0(0) },
- .buck2_gpiodvs = true,
.buck1_voltage[0] = 1350000, /* 1.35V */
.buck1_voltage[1] = 1300000, /* 1.3V */
@@ -1116,7 +1122,30 @@ static void __init nuri_ehci_init(void)
}
/* CAMERA */
+static struct regulator_consumer_supply cam_vt_cam15_supply =
+ REGULATOR_SUPPLY("vdd_core", "6-003c");
+
+static struct regulator_init_data cam_vt_cam15_reg_init_data = {
+ .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &cam_vt_cam15_supply,
+};
+
+static struct fixed_voltage_config cam_vt_cam15_fixed_voltage_cfg = {
+ .supply_name = "VT_CAM_1.5V",
+ .microvolts = 1500000,
+ .gpio = EXYNOS4_GPE2(2), /* VT_CAM_1.5V_EN */
+ .enable_high = 1,
+ .init_data = &cam_vt_cam15_reg_init_data,
+};
+
+static struct platform_device cam_vt_cam15_fixed_rdev = {
+ .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_VT_15V,
+ .dev = { .platform_data = &cam_vt_cam15_fixed_voltage_cfg },
+};
+
static struct regulator_consumer_supply cam_vdda_supply[] = {
+ REGULATOR_SUPPLY("vdda", "6-003c"),
REGULATOR_SUPPLY("a_sensor", "0-001f"),
};
@@ -1173,6 +1202,21 @@ static struct s5p_platform_mipi_csis mipi_csis_platdata = {
#define GPIO_CAM_MEGA_RST EXYNOS4_GPY3(7) /* ISP_RESET */
#define GPIO_CAM_8M_ISP_INT EXYNOS4_GPL2(5)
+#define GPIO_CAM_VT_NSTBY EXYNOS4_GPL2(0)
+#define GPIO_CAM_VT_NRST EXYNOS4_GPL2(1)
+
+static struct s5k6aa_platform_data s5k6aa_pldata = {
+ .mclk_frequency = 24000000UL,
+ .gpio_reset = { GPIO_CAM_VT_NRST, 0 },
+ .gpio_stby = { GPIO_CAM_VT_NSTBY, 0 },
+ .bus_type = V4L2_MBUS_PARALLEL,
+ .horiz_flip = 1,
+};
+
+static struct i2c_board_info s5k6aa_board_info = {
+ I2C_BOARD_INFO("S5K6AA", 0x3c),
+ .platform_data = &s5k6aa_pldata,
+};
static struct m5mols_platform_data m5mols_platdata = {
.gpio_reset = GPIO_CAM_MEGA_RST,
@@ -1185,6 +1229,13 @@ static struct i2c_board_info m5mols_board_info = {
static struct s5p_fimc_isp_info nuri_camera_sensors[] = {
{
+ .flags = V4L2_MBUS_PCLK_SAMPLE_RISING |
+ V4L2_MBUS_VSYNC_ACTIVE_LOW,
+ .bus_type = FIMC_ITU_601,
+ .board_info = &s5k6aa_board_info,
+ .clk_frequency = 24000000UL,
+ .i2c_bus_num = 6,
+ }, {
.flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
V4L2_MBUS_VSYNC_ACTIVE_LOW,
.bus_type = FIMC_MIPI_CSI2,
@@ -1200,11 +1251,13 @@ static struct s5p_platform_fimc fimc_md_platdata = {
};
static struct gpio nuri_camera_gpios[] = {
+ { GPIO_CAM_VT_NSTBY, GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" },
+ { GPIO_CAM_VT_NRST, GPIOF_OUT_INIT_LOW, "CAM_VGA_NRST" },
{ GPIO_CAM_8M_ISP_INT, GPIOF_IN, "8M_ISP_INT" },
{ GPIO_CAM_MEGA_RST, GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" },
};
-static void nuri_camera_init(void)
+static void __init nuri_camera_init(void)
{
s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
&s5p_device_mipi_csis0);
@@ -1224,6 +1277,8 @@ static void nuri_camera_init(void)
pr_err("%s: Failed to configure 8M_ISP_INT GPIO\n", __func__);
/* Free GPIOs controlled directly by the sensor drivers. */
+ gpio_free(GPIO_CAM_VT_NRST);
+ gpio_free(GPIO_CAM_VT_NSTBY);
gpio_free(GPIO_CAM_MEGA_RST);
if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A)) {
@@ -1234,15 +1289,27 @@ static void nuri_camera_init(void)
s5p_gpio_set_drvstr(EXYNOS4_GPJ1(3), S5P_GPIO_DRVSTR_LV4);
}
+static struct s3c2410_platform_i2c nuri_i2c6_platdata __initdata = {
+ .frequency = 400000U,
+ .sda_delay = 200,
+ .bus_num = 6,
+};
+
static struct s3c2410_platform_i2c nuri_i2c0_platdata __initdata = {
.frequency = 400000U,
.sda_delay = 200,
};
+/* DEVFREQ controlling memory/bus */
+static struct platform_device exynos4_bus_devfreq = {
+ .name = "exynos4210-busfreq",
+};
+
static struct platform_device *nuri_devices[] __initdata = {
/* Samsung Platform Devices */
&s3c_device_i2c5, /* PMIC should initialize first */
&s3c_device_i2c0,
+ &s3c_device_i2c6,
&emmc_fixed_voltage,
&s5p_device_mipi_csis0,
&s5p_device_fimc0,
@@ -1259,6 +1326,8 @@ static struct platform_device *nuri_devices[] __initdata = {
&s3c_device_i2c3,
&i2c9_gpio,
&s3c_device_adc,
+ &s5p_device_g2d,
+ &s5p_device_jpeg,
&s3c_device_rtc,
&s5p_device_mfc,
&s5p_device_mfc_l,
@@ -1271,8 +1340,10 @@ static struct platform_device *nuri_devices[] __initdata = {
&nuri_backlight_device,
&max8903_fixed_reg_dev,
&nuri_max8903_device,
+ &cam_vt_cam15_fixed_rdev,
&cam_vdda_fixed_rdev,
&cam_8m_12v_fixed_rdev,
+ &exynos4_bus_devfreq,
};
static void __init nuri_map_io(void)
@@ -1302,6 +1373,7 @@ static void __init nuri_machine_init(void)
i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3));
i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs));
+ s3c_i2c6_set_platdata(&nuri_i2c6_platdata);
s5p_fimd0_set_platdata(&nuri_fb_pdata);
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index b4d032d5c878..878d4c99142d 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -20,6 +20,7 @@
#include <linux/regulator/machine.h>
#include <linux/mfd/max8997.h>
#include <linux/lcd.h>
+#include <linux/rfkill-gpio.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
@@ -235,6 +236,7 @@ static struct regulator_init_data __initdata max8997_ldo9_data = {
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
+ .always_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
@@ -278,6 +280,7 @@ static struct regulator_init_data __initdata max8997_ldo14_data = {
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
+ .always_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
@@ -293,6 +296,7 @@ static struct regulator_init_data __initdata max8997_ldo17_data = {
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
+ .always_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
@@ -602,6 +606,23 @@ static struct s3c_fb_platdata origen_lcd_pdata __initdata = {
.setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
};
+/* Bluetooth rfkill gpio platform data */
+struct rfkill_gpio_platform_data origen_bt_pdata = {
+ .reset_gpio = EXYNOS4_GPX2(2),
+ .shutdown_gpio = -1,
+ .type = RFKILL_TYPE_BLUETOOTH,
+ .name = "origen-bt",
+};
+
+/* Bluetooth Platform device */
+static struct platform_device origen_device_bluetooth = {
+ .name = "rfkill_gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &origen_bt_pdata,
+ },
+};
+
static struct platform_device *origen_devices[] __initdata = {
&s3c_device_hsmmc2,
&s3c_device_hsmmc0,
@@ -613,9 +634,12 @@ static struct platform_device *origen_devices[] __initdata = {
&s5p_device_fimc1,
&s5p_device_fimc2,
&s5p_device_fimc3,
+ &s5p_device_fimc_md,
&s5p_device_fimd0,
+ &s5p_device_g2d,
&s5p_device_hdmi,
&s5p_device_i2c_hdmiphy,
+ &s5p_device_jpeg,
&s5p_device_mfc,
&s5p_device_mfc_l,
&s5p_device_mfc_r,
@@ -623,6 +647,7 @@ static struct platform_device *origen_devices[] __initdata = {
&exynos4_device_ohci,
&origen_device_gpiokeys,
&origen_lcd_hv070wsa,
+ &origen_device_bluetooth,
};
/* LCD Backlight data */
@@ -636,6 +661,16 @@ static struct platform_pwm_backlight_data origen_bl_data = {
.pwm_period_ns = 1000,
};
+static void __init origen_bt_setup(void)
+{
+ gpio_request(EXYNOS4_GPA0(0), "GPIO BT_UART");
+ /* 4 UART Pins configuration */
+ s3c_gpio_cfgrange_nopull(EXYNOS4_GPA0(0), 4, S3C_GPIO_SFN(2));
+ /* Setup BT Reset, this gpio will be requesed by rfkill-gpio */
+ s3c_gpio_cfgpin(EXYNOS4_GPX2(2), S3C_GPIO_OUTPUT);
+ s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE);
+}
+
static void s5p_tv_setup(void)
{
/* Direct HPD to HDMI chip */
@@ -689,6 +724,8 @@ static void __init origen_machine_init(void)
platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);
+
+ origen_bt_setup();
}
MACHINE_START(ORIGEN, "ORIGEN")
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index 5258b8563676..83b91fa777c1 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -270,6 +270,9 @@ static struct platform_device *smdkv310_devices[] __initdata = {
&s5p_device_fimc1,
&s5p_device_fimc2,
&s5p_device_fimc3,
+ &s5p_device_fimc_md,
+ &s5p_device_g2d,
+ &s5p_device_jpeg,
&exynos4_device_ac97,
&exynos4_device_i2s0,
&exynos4_device_ohci,
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 4850700798d0..0b944eb66ebd 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -47,6 +47,7 @@
#include <media/v4l2-mediabus.h>
#include <media/s5p_fimc.h>
#include <media/m5mols.h>
+#include <media/s5k6aa.h>
#include "common.h"
@@ -123,8 +124,10 @@ static struct regulator_consumer_supply lp3974_buck1_consumer =
static struct regulator_consumer_supply lp3974_buck2_consumer =
REGULATOR_SUPPLY("vddg3d", NULL);
-static struct regulator_consumer_supply lp3974_buck3_consumer =
- REGULATOR_SUPPLY("vdet", "s5p-sdo");
+static struct regulator_consumer_supply lp3974_buck3_consumer[] = {
+ REGULATOR_SUPPLY("vdet", "s5p-sdo"),
+ REGULATOR_SUPPLY("vdd_reg", "0-003c"),
+};
static struct regulator_init_data lp3974_buck1_data = {
.constraints = {
@@ -169,8 +172,8 @@ static struct regulator_init_data lp3974_buck3_data = {
.enabled = 1,
},
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &lp3974_buck3_consumer,
+ .num_consumer_supplies = ARRAY_SIZE(lp3974_buck3_consumer),
+ .consumer_supplies = lp3974_buck3_consumer,
};
static struct regulator_init_data lp3974_buck4_data = {
@@ -303,6 +306,9 @@ static struct regulator_init_data lp3974_ldo8_data = {
.consumer_supplies = lp3974_ldo8_consumer,
};
+static struct regulator_consumer_supply lp3974_ldo9_consumer =
+ REGULATOR_SUPPLY("vddio", "0-003c");
+
static struct regulator_init_data lp3974_ldo9_data = {
.constraints = {
.name = "VCC_2.8V",
@@ -314,6 +320,8 @@ static struct regulator_init_data lp3974_ldo9_data = {
.enabled = 1,
},
},
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &lp3974_ldo9_consumer,
};
static struct regulator_init_data lp3974_ldo10_data = {
@@ -412,6 +420,7 @@ static struct regulator_init_data lp3974_ldo15_data = {
};
static struct regulator_consumer_supply lp3974_ldo16_consumer[] = {
+ REGULATOR_SUPPLY("vdda", "0-003c"),
REGULATOR_SUPPLY("a_sensor", "0-001f"),
};
@@ -819,6 +828,8 @@ static struct s3c_fb_pd_win universal_fb_win0 = {
},
.max_bpp = 32,
.default_bpp = 16,
+ .virtual_x = 480,
+ .virtual_y = 2 * 800,
};
static struct s3c_fb_platdata universal_lcd_pdata __initdata = {
@@ -830,6 +841,28 @@ static struct s3c_fb_platdata universal_lcd_pdata __initdata = {
.setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
};
+static struct regulator_consumer_supply cam_vt_dio_supply =
+ REGULATOR_SUPPLY("vdd_core", "0-003c");
+
+static struct regulator_init_data cam_vt_dio_reg_init_data = {
+ .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &cam_vt_dio_supply,
+};
+
+static struct fixed_voltage_config cam_vt_dio_fixed_voltage_cfg = {
+ .supply_name = "CAM_VT_D_IO",
+ .microvolts = 2800000,
+ .gpio = EXYNOS4_GPE2(1), /* CAM_PWR_EN2 */
+ .enable_high = 1,
+ .init_data = &cam_vt_dio_reg_init_data,
+};
+
+static struct platform_device cam_vt_dio_fixed_reg_dev = {
+ .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_VT_DIO,
+ .dev = { .platform_data = &cam_vt_dio_fixed_voltage_cfg },
+};
+
static struct regulator_consumer_supply cam_i_core_supply =
REGULATOR_SUPPLY("core", "0-001f");
@@ -885,6 +918,28 @@ static struct s5p_platform_mipi_csis mipi_csis_platdata = {
#define GPIO_CAM_LEVEL_EN(n) EXYNOS4_GPE4(n + 3)
#define GPIO_CAM_8M_ISP_INT EXYNOS4_GPX1(5) /* XEINT_13 */
#define GPIO_CAM_MEGA_nRST EXYNOS4_GPE2(5)
+#define GPIO_CAM_VGA_NRST EXYNOS4_GPE4(7)
+#define GPIO_CAM_VGA_NSTBY EXYNOS4_GPE4(6)
+
+static int s5k6aa_set_power(int on)
+{
+ gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on);
+ return 0;
+}
+
+static struct s5k6aa_platform_data s5k6aa_platdata = {
+ .mclk_frequency = 21600000UL,
+ .gpio_reset = { GPIO_CAM_VGA_NRST, 0 },
+ .gpio_stby = { GPIO_CAM_VGA_NSTBY, 0 },
+ .bus_type = V4L2_MBUS_PARALLEL,
+ .horiz_flip = 1,
+ .set_power = s5k6aa_set_power,
+};
+
+static struct i2c_board_info s5k6aa_board_info = {
+ I2C_BOARD_INFO("S5K6AA", 0x3C),
+ .platform_data = &s5k6aa_platdata,
+};
static int m5mols_set_power(struct device *dev, int on)
{
@@ -909,6 +964,14 @@ static struct s5p_fimc_isp_info universal_camera_sensors[] = {
.mux_id = 0,
.flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
V4L2_MBUS_VSYNC_ACTIVE_LOW,
+ .bus_type = FIMC_ITU_601,
+ .board_info = &s5k6aa_board_info,
+ .i2c_bus_num = 0,
+ .clk_frequency = 24000000UL,
+ }, {
+ .mux_id = 0,
+ .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
+ V4L2_MBUS_VSYNC_ACTIVE_LOW,
.bus_type = FIMC_MIPI_CSI2,
.board_info = &m5mols_board_info,
.i2c_bus_num = 0,
@@ -927,9 +990,11 @@ static struct gpio universal_camera_gpios[] = {
{ GPIO_CAM_LEVEL_EN(2), GPIOF_OUT_INIT_LOW, "CAM_LVL_EN2" },
{ GPIO_CAM_8M_ISP_INT, GPIOF_IN, "8M_ISP_INT" },
{ GPIO_CAM_MEGA_nRST, GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" },
+ { GPIO_CAM_VGA_NRST, GPIOF_OUT_INIT_LOW, "CAM_VGA_NRST" },
+ { GPIO_CAM_VGA_NSTBY, GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" },
};
-static void universal_camera_init(void)
+static void __init universal_camera_init(void)
{
s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
&s5p_device_mipi_csis0);
@@ -950,6 +1015,8 @@ static void universal_camera_init(void)
/* Free GPIOs controlled directly by the sensor drivers. */
gpio_free(GPIO_CAM_MEGA_nRST);
gpio_free(GPIO_CAM_8M_ISP_INT);
+ gpio_free(GPIO_CAM_VGA_NRST);
+ gpio_free(GPIO_CAM_VGA_NSTBY);
if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A))
pr_err("Camera port A setup failed\n");
@@ -962,6 +1029,7 @@ static struct platform_device *universal_devices[] __initdata = {
&s5p_device_fimc1,
&s5p_device_fimc2,
&s5p_device_fimc3,
+ &s5p_device_g2d,
&mmc0_fixed_voltage,
&s3c_device_hsmmc0,
&s3c_device_hsmmc2,
@@ -980,9 +1048,11 @@ static struct platform_device *universal_devices[] __initdata = {
&universal_gpio_keys,
&s5p_device_onenand,
&s5p_device_fimd0,
+ &s5p_device_jpeg,
&s5p_device_mfc,
&s5p_device_mfc_l,
&s5p_device_mfc_r,
+ &cam_vt_dio_fixed_reg_dev,
&cam_i_core_fixed_reg_dev,
&cam_s_if_fixed_reg_dev,
&s5p_device_fimc_md,
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 3919fba52ac8..37a5d715a6c2 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -314,8 +314,10 @@ config MACH_IMX27_VISSTRIM_M10
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_MMC
+ select IMX_HAVE_PLATFORM_MX2_CAMERA
select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_MMC
+ select LEDS_GPIO_REGISTER
help
Include support for Visstrim_m10 platform and its different variants.
This includes specific configurations for the board and its
@@ -486,6 +488,7 @@ config MACH_MX31MOBOARD
bool "Support mx31moboard platforms (EPFL Mobots group)"
select SOC_IMX31
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 428459fbca4b..f7b074f496f0 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -30,6 +30,10 @@
#include <linux/input.h>
#include <linux/gpio.h>
#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/leds.h>
+#include <linux/memblock.h>
+#include <media/soc_camera.h>
#include <sound/tlv320aic32x4.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -39,6 +43,8 @@
#include "devices-imx27.h"
+#define TVP5150_RSTN (GPIO_PORTC + 18)
+#define TVP5150_PWDN (GPIO_PORTC + 19)
#define OTG_PHY_CS_GPIO (GPIO_PORTF + 17)
#define SDHC1_IRQ IRQ_GPIOB(25)
@@ -100,8 +106,99 @@ static const int visstrim_m10_pins[] __initconst = {
PE1_PF_USBOTG_STP,
PB23_PF_USB_PWR,
PB24_PF_USB_OC,
+ /* CSI */
+ PB10_PF_CSI_D0,
+ PB11_PF_CSI_D1,
+ PB12_PF_CSI_D2,
+ PB13_PF_CSI_D3,
+ PB14_PF_CSI_D4,
+ PB15_PF_CSI_MCLK,
+ PB16_PF_CSI_PIXCLK,
+ PB17_PF_CSI_D5,
+ PB18_PF_CSI_D6,
+ PB19_PF_CSI_D7,
+ PB20_PF_CSI_VSYNC,
+ PB21_PF_CSI_HSYNC,
};
+/* Camera */
+static int visstrim_camera_power(struct device *dev, int on)
+{
+ gpio_set_value(TVP5150_PWDN, on);
+
+ return 0;
+};
+
+static int visstrim_camera_reset(struct device *dev)
+{
+ gpio_set_value(TVP5150_RSTN, 0);
+ ndelay(500);
+ gpio_set_value(TVP5150_RSTN, 1);
+
+ return 0;
+};
+
+static struct i2c_board_info visstrim_i2c_camera = {
+ I2C_BOARD_INFO("tvp5150", 0x5d),
+};
+
+static struct soc_camera_link iclink_tvp5150 = {
+ .bus_id = 0,
+ .board_info = &visstrim_i2c_camera,
+ .i2c_adapter_id = 0,
+ .power = visstrim_camera_power,
+ .reset = visstrim_camera_reset,
+};
+
+static struct mx2_camera_platform_data visstrim_camera = {
+ .flags = MX2_CAMERA_CCIR | MX2_CAMERA_CCIR_INTERLACE |
+ MX2_CAMERA_SWAP16 | MX2_CAMERA_PCLK_SAMPLE_RISING,
+ .clk = 100000,
+};
+
+static phys_addr_t mx2_camera_base __initdata;
+#define MX2_CAMERA_BUF_SIZE SZ_8M
+
+static void __init visstrim_camera_init(void)
+{
+ struct platform_device *pdev;
+ int dma;
+
+ /* Initialize tvp5150 gpios */
+ mxc_gpio_mode(TVP5150_RSTN | GPIO_GPIO | GPIO_OUT);
+ mxc_gpio_mode(TVP5150_PWDN | GPIO_GPIO | GPIO_OUT);
+ gpio_set_value(TVP5150_RSTN, 1);
+ gpio_set_value(TVP5150_PWDN, 0);
+ ndelay(1);
+
+ gpio_set_value(TVP5150_PWDN, 1);
+ ndelay(1);
+ gpio_set_value(TVP5150_RSTN, 0);
+ ndelay(500);
+ gpio_set_value(TVP5150_RSTN, 1);
+ ndelay(200000);
+
+ pdev = imx27_add_mx2_camera(&visstrim_camera);
+ if (IS_ERR(pdev))
+ return;
+
+ dma = dma_declare_coherent_memory(&pdev->dev,
+ mx2_camera_base, mx2_camera_base,
+ MX2_CAMERA_BUF_SIZE,
+ DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+ if (!(dma & DMA_MEMORY_MAP))
+ return;
+}
+
+static void __init visstrim_reserve(void)
+{
+ /* reserve 4 MiB for mx2-camera */
+ mx2_camera_base = memblock_alloc(MX2_CAMERA_BUF_SIZE,
+ MX2_CAMERA_BUF_SIZE);
+ memblock_free(mx2_camera_base, MX2_CAMERA_BUF_SIZE);
+ memblock_remove(mx2_camera_base, MX2_CAMERA_BUF_SIZE);
+}
+
/* GPIOs used as events for applications */
static struct gpio_keys_button visstrim_gpio_keys[] = {
{
@@ -136,6 +233,35 @@ static const struct gpio_keys_platform_data
.nbuttons = ARRAY_SIZE(visstrim_gpio_keys),
};
+/* led */
+static const struct gpio_led visstrim_m10_leds[] __initconst = {
+ {
+ .name = "visstrim:ld0",
+ .default_trigger = "nand-disk",
+ .gpio = (GPIO_PORTC + 29),
+ },
+ {
+ .name = "visstrim:ld1",
+ .default_trigger = "nand-disk",
+ .gpio = (GPIO_PORTC + 24),
+ },
+ {
+ .name = "visstrim:ld2",
+ .default_trigger = "nand-disk",
+ .gpio = (GPIO_PORTC + 28),
+ },
+ {
+ .name = "visstrim:ld3",
+ .default_trigger = "nand-disk",
+ .gpio = (GPIO_PORTC + 25),
+ },
+};
+
+static const struct gpio_led_platform_data visstrim_m10_led_data __initconst = {
+ .leds = visstrim_m10_leds,
+ .num_leds = ARRAY_SIZE(visstrim_m10_leds),
+};
+
/* Visstrim_SM10 has a microSD slot connected to sdhc1 */
static int visstrim_m10_sdhc1_init(struct device *dev,
irq_handler_t detect_irq, void *data)
@@ -216,6 +342,9 @@ static struct i2c_board_info visstrim_m10_i2c_devices[] = {
{
I2C_BOARD_INFO("tlv320aic32x4", 0x18),
.platform_data = &visstrim_m10_aic32x4_pdata,
+ },
+ {
+ I2C_BOARD_INFO("m41t00", 0x68),
}
};
@@ -254,16 +383,21 @@ static void __init visstrim_m10_board_init(void)
imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata);
imx27_add_imx_uart0(&uart_pdata);
- i2c_register_board_info(0, visstrim_m10_i2c_devices,
- ARRAY_SIZE(visstrim_m10_i2c_devices));
imx27_add_imx_i2c(0, &visstrim_m10_i2c_data);
imx27_add_imx_i2c(1, &visstrim_m10_i2c_data);
+ i2c_register_board_info(0, visstrim_m10_i2c_devices,
+ ARRAY_SIZE(visstrim_m10_i2c_devices));
+
imx27_add_mxc_mmc(0, &visstrim_m10_sdhc_pdata);
imx27_add_mxc_ehci_otg(&visstrim_m10_usbotg_pdata);
imx27_add_fec(NULL);
imx_add_gpio_keys(&visstrim_gpio_keys_platform_data);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
imx_add_platform_device("mx27vis", 0, NULL, 0, NULL, 0);
+ platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0,
+ &iclink_tvp5150, sizeof(iclink_tvp5150));
+ gpio_led_register_device(0, &visstrim_m10_led_data);
+ visstrim_camera_init();
}
static void __init visstrim_m10_timer_init(void)
@@ -277,6 +411,7 @@ static struct sys_timer visstrim_m10_timer = {
MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
.atag_offset = 0x100,
+ .reserve = visstrim_reserve,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index f225262b5c38..c0511fb1a5f9 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -530,6 +530,8 @@ static void __init mx31moboard_init(void)
platform_add_devices(devices, ARRAY_SIZE(devices));
gpio_led_register_device(-1, &mx31moboard_led_pdata);
+ imx31_add_imx2_wdt(NULL);
+
imx31_add_imx_uart0(&uart0_pdata);
imx31_add_imx_uart4(&uart4_pdata);
@@ -590,7 +592,7 @@ static void __init mx31moboard_reserve(void)
}
MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
- /* Maintainer: Valentin Longchamp, EPFL Mobots group */
+ /* Maintainer: Philippe Retornaz, EPFL Mobots group */
.atag_offset = 0x100,
.reserve = mx31moboard_reserve,
.map_io = mx31_map_io,
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index 0af6c9c5b3fd..e14291d89e4f 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -4,6 +4,11 @@
*
* Author: Fabio Estevam <fabio.estevam@freescale.com>
*
+ * Copyright (C) 2011 Meprolight, Ltd.
+ * Alex Gershgorin <alexg@meprolight.com>
+ *
+ * Modified from i.MX31 3-Stack Development System
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -34,15 +39,102 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
+#include <asm/memblock.h>
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/iomux-mx35.h>
#include <mach/irqs.h>
#include <mach/3ds_debugboard.h>
+#include <video/platform_lcd.h>
+
+#include <media/soc_camera.h>
#include "devices-imx35.h"
+#define GPIO_MC9S08DZ60_GPS_ENABLE 0
+#define GPIO_MC9S08DZ60_HDD_ENABLE 4
+#define GPIO_MC9S08DZ60_WIFI_ENABLE 5
+#define GPIO_MC9S08DZ60_LCD_ENABLE 6
+#define GPIO_MC9S08DZ60_SPEAKER_ENABLE 8
+
+static const struct fb_videomode fb_modedb[] = {
+ {
+ /* 800x480 @ 55 Hz */
+ .name = "Ceramate-CLAA070VC01",
+ .refresh = 55,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = 40000,
+ .left_margin = 40,
+ .right_margin = 40,
+ .upper_margin = 5,
+ .lower_margin = 5,
+ .hsync_len = 20,
+ .vsync_len = 10,
+ .sync = FB_SYNC_OE_ACT_HIGH,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ },
+};
+
+static const struct ipu_platform_data mx3_ipu_data __initconst = {
+ .irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata __initdata = {
+ .name = "Ceramate-CLAA070VC01",
+ .mode = fb_modedb,
+ .num_modes = ARRAY_SIZE(fb_modedb),
+};
+
+static struct i2c_board_info __initdata i2c_devices_3ds[] = {
+ {
+ I2C_BOARD_INFO("mc9s08dz60", 0x69),
+ },
+};
+
+static int lcd_power_gpio = -ENXIO;
+
+static int mc9s08dz60_gpiochip_match(struct gpio_chip *chip,
+ void *data)
+{
+ return !strcmp(chip->label, data);
+}
+
+static void mx35_3ds_lcd_set_power(
+ struct plat_lcd_data *pd, unsigned int power)
+{
+ struct gpio_chip *chip;
+
+ if (!gpio_is_valid(lcd_power_gpio)) {
+ chip = gpiochip_find(
+ "mc9s08dz60", mc9s08dz60_gpiochip_match);
+ if (chip) {
+ lcd_power_gpio =
+ chip->base + GPIO_MC9S08DZ60_LCD_ENABLE;
+ if (gpio_request(lcd_power_gpio, "lcd_power") < 0) {
+ pr_err("error: gpio already requested!\n");
+ lcd_power_gpio = -ENXIO;
+ }
+ } else {
+ pr_err("error: didn't find mc9s08dz60 gpio chip\n");
+ }
+ }
+
+ if (gpio_is_valid(lcd_power_gpio))
+ gpio_set_value_cansleep(lcd_power_gpio, power);
+}
+
+static struct plat_lcd_data mx35_3ds_lcd_data = {
+ .set_power = mx35_3ds_lcd_set_power,
+};
+
+static struct platform_device mx35_3ds_lcd = {
+ .name = "platform-lcd",
+ .dev.platform_data = &mx35_3ds_lcd_data,
+};
+
#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(1, 1))
static const struct imxuart_platform_data uart_pdata __initconst = {
@@ -120,6 +212,109 @@ static iomux_v3_cfg_t mx35pdk_pads[] = {
/* I2C1 */
MX35_PAD_I2C1_CLK__I2C1_SCL,
MX35_PAD_I2C1_DAT__I2C1_SDA,
+ /* Display */
+ MX35_PAD_LD0__IPU_DISPB_DAT_0,
+ MX35_PAD_LD1__IPU_DISPB_DAT_1,
+ MX35_PAD_LD2__IPU_DISPB_DAT_2,
+ MX35_PAD_LD3__IPU_DISPB_DAT_3,
+ MX35_PAD_LD4__IPU_DISPB_DAT_4,
+ MX35_PAD_LD5__IPU_DISPB_DAT_5,
+ MX35_PAD_LD6__IPU_DISPB_DAT_6,
+ MX35_PAD_LD7__IPU_DISPB_DAT_7,
+ MX35_PAD_LD8__IPU_DISPB_DAT_8,
+ MX35_PAD_LD9__IPU_DISPB_DAT_9,
+ MX35_PAD_LD10__IPU_DISPB_DAT_10,
+ MX35_PAD_LD11__IPU_DISPB_DAT_11,
+ MX35_PAD_LD12__IPU_DISPB_DAT_12,
+ MX35_PAD_LD13__IPU_DISPB_DAT_13,
+ MX35_PAD_LD14__IPU_DISPB_DAT_14,
+ MX35_PAD_LD15__IPU_DISPB_DAT_15,
+ MX35_PAD_LD16__IPU_DISPB_DAT_16,
+ MX35_PAD_LD17__IPU_DISPB_DAT_17,
+ MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
+ MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
+ MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
+ MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
+ MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
+ MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
+ MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
+ /* CSI */
+ MX35_PAD_TX1__IPU_CSI_D_6,
+ MX35_PAD_TX0__IPU_CSI_D_7,
+ MX35_PAD_CSI_D8__IPU_CSI_D_8,
+ MX35_PAD_CSI_D9__IPU_CSI_D_9,
+ MX35_PAD_CSI_D10__IPU_CSI_D_10,
+ MX35_PAD_CSI_D11__IPU_CSI_D_11,
+ MX35_PAD_CSI_D12__IPU_CSI_D_12,
+ MX35_PAD_CSI_D13__IPU_CSI_D_13,
+ MX35_PAD_CSI_D14__IPU_CSI_D_14,
+ MX35_PAD_CSI_D15__IPU_CSI_D_15,
+ MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC,
+ MX35_PAD_CSI_MCLK__IPU_CSI_MCLK,
+ MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK,
+ MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC,
+};
+
+/*
+ * Camera support
+*/
+static phys_addr_t mx3_camera_base __initdata;
+#define MX35_3DS_CAMERA_BUF_SIZE SZ_8M
+
+static const struct mx3_camera_pdata mx35_3ds_camera_pdata __initconst = {
+ .flags = MX3_CAMERA_DATAWIDTH_8,
+ .mclk_10khz = 2000,
+};
+
+static int __init imx35_3ds_init_camera(void)
+{
+ int dma, ret = -ENOMEM;
+ struct platform_device *pdev =
+ imx35_alloc_mx3_camera(&mx35_3ds_camera_pdata);
+
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ if (!mx3_camera_base)
+ goto err;
+
+ dma = dma_declare_coherent_memory(&pdev->dev,
+ mx3_camera_base, mx3_camera_base,
+ MX35_3DS_CAMERA_BUF_SIZE,
+ DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+
+ if (!(dma & DMA_MEMORY_MAP))
+ goto err;
+
+ ret = platform_device_add(pdev);
+ if (ret)
+err:
+ platform_device_put(pdev);
+
+ return ret;
+}
+
+static const struct ipu_platform_data mx35_3ds_ipu_data __initconst = {
+ .irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct i2c_board_info mx35_3ds_i2c_camera = {
+ I2C_BOARD_INFO("ov2640", 0x30),
+};
+
+static struct soc_camera_link iclink_ov2640 = {
+ .bus_id = 0,
+ .board_info = &mx35_3ds_i2c_camera,
+ .i2c_adapter_id = 0,
+ .power = NULL,
+};
+
+static struct platform_device mx35_3ds_ov2640 = {
+ .name = "soc-camera-pdrv",
+ .id = 0,
+ .dev = {
+ .platform_data = &iclink_ov2640,
+ },
};
static int mx35_3ds_otg_init(struct platform_device *pdev)
@@ -179,6 +374,8 @@ static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = {
*/
static void __init mx35_3ds_init(void)
{
+ struct platform_device *imx35_fb_pdev;
+
imx35_soc_init();
mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
@@ -204,6 +401,17 @@ static void __init mx35_3ds_init(void)
pr_warn("Init of the debugboard failed, all "
"devices on the debugboard are unusable.\n");
imx35_add_imx_i2c0(&mx35_3ds_i2c0_data);
+
+ i2c_register_board_info(
+ 0, i2c_devices_3ds, ARRAY_SIZE(i2c_devices_3ds));
+
+ imx35_add_ipu_core(&mx35_3ds_ipu_data);
+ platform_device_register(&mx35_3ds_ov2640);
+ imx35_3ds_init_camera();
+
+ imx35_fb_pdev = imx35_add_mx3_sdc_fb(&mx3fb_pdata);
+ mx35_3ds_lcd.dev.parent = &imx35_fb_pdev->dev;
+ platform_device_register(&mx35_3ds_lcd);
}
static void __init mx35pdk_timer_init(void)
@@ -215,6 +423,13 @@ struct sys_timer mx35pdk_timer = {
.init = mx35pdk_timer_init,
};
+static void __init mx35_3ds_reserve(void)
+{
+ /* reserve MX35_3DS_CAMERA_BUF_SIZE bytes for mx3-camera */
+ mx3_camera_base = arm_memblock_steal(MX35_3DS_CAMERA_BUF_SIZE,
+ MX35_3DS_CAMERA_BUF_SIZE);
+}
+
MACHINE_START(MX35_3DS, "Freescale MX35PDK")
/* Maintainer: Freescale Semiconductor, Inc */
.atag_offset = 0x100,
@@ -224,5 +439,6 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK")
.handle_irq = imx35_handle_irq,
.timer = &mx35pdk_timer,
.init_machine = mx35_3ds_init,
+ .reserve = mx35_3ds_reserve,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 7fc603b46891..90ceab761929 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -44,6 +44,20 @@ config MACH_GURUPLUG
Say 'Y' here if you want your kernel to support the
Marvell GuruPlug Reference Board.
+config ARCH_KIRKWOOD_DT
+ bool "Marvell Kirkwood Flattened Device Tree"
+ select USE_OF
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell Kirkwood using flattened device tree.
+
+config MACH_DREAMPLUG_DT
+ bool "Marvell DreamPlug (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell DreamPlug (Flattened Device Tree).
+
config MACH_TS219
bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
help
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 5dcaa81a2ec3..acbc5e1db06f 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -20,3 +20,4 @@ obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
obj-$(CONFIG_MACH_T5325) += t5325-setup.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
+obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o
diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot
index 760a0efe7580..16f938522304 100644
--- a/arch/arm/mach-kirkwood/Makefile.boot
+++ b/arch/arm/mach-kirkwood/Makefile.boot
@@ -1,3 +1,5 @@
zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
+
+dtb-$(CONFIG_MACH_DREAMPLUG_DT) += kirkwood-dreamplug.dtb
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
new file mode 100644
index 000000000000..fbe6405602ed
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -0,0 +1,180 @@
+/*
+ * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
+ *
+ * arch/arm/mach-kirkwood/board-dt.c
+ *
+ * Marvell DreamPlug Reference Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct of_device_id kirkwood_dt_match_table[] __initdata = {
+ { .compatible = "simple-bus", },
+ { }
+};
+
+struct mtd_partition dreamplug_partitions[] = {
+ {
+ .name = "u-boot",
+ .size = SZ_512K,
+ .offset = 0,
+ },
+ {
+ .name = "u-boot env",
+ .size = SZ_64K,
+ .offset = SZ_512K + SZ_512K,
+ },
+ {
+ .name = "dtb",
+ .size = SZ_64K,
+ .offset = SZ_512K + SZ_512K + SZ_512K,
+ },
+};
+
+static const struct flash_platform_data dreamplug_spi_slave_data = {
+ .type = "mx25l1606e",
+ .name = "spi_flash",
+ .parts = dreamplug_partitions,
+ .nr_parts = ARRAY_SIZE(dreamplug_partitions),
+};
+
+static struct spi_board_info __initdata dreamplug_spi_slave_info[] = {
+ {
+ .modalias = "m25p80",
+ .platform_data = &dreamplug_spi_slave_data,
+ .irq = -1,
+ .max_speed_hz = 50000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ },
+};
+
+static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv643xx_eth_platform_data dreamplug_ge01_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(1),
+};
+
+static struct mv_sata_platform_data dreamplug_sata_data = {
+ .n_ports = 1,
+};
+
+static struct mvsdio_platform_data dreamplug_mvsdio_data = {
+ /* unfortunately the CD signal has not been connected */
+};
+
+static struct gpio_led dreamplug_led_pins[] = {
+ {
+ .name = "dreamplug:blue:bluetooth",
+ .gpio = 47,
+ .active_low = 1,
+ },
+ {
+ .name = "dreamplug:green:wifi",
+ .gpio = 48,
+ .active_low = 1,
+ },
+ {
+ .name = "dreamplug:green:wifi_ap",
+ .gpio = 49,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data dreamplug_led_data = {
+ .leds = dreamplug_led_pins,
+ .num_leds = ARRAY_SIZE(dreamplug_led_pins),
+};
+
+static struct platform_device dreamplug_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &dreamplug_led_data,
+ }
+};
+
+static unsigned int dreamplug_mpp_config[] __initdata = {
+ MPP0_SPI_SCn,
+ MPP1_SPI_MOSI,
+ MPP2_SPI_SCK,
+ MPP3_SPI_MISO,
+ MPP47_GPIO, /* Bluetooth LED */
+ MPP48_GPIO, /* Wifi LED */
+ MPP49_GPIO, /* Wifi AP LED */
+ 0
+};
+
+static void __init dreamplug_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_mpp_conf(dreamplug_mpp_config);
+
+ spi_register_board_info(dreamplug_spi_slave_info,
+ ARRAY_SIZE(dreamplug_spi_slave_info));
+ kirkwood_spi_init();
+
+ kirkwood_ehci_init();
+ kirkwood_ge00_init(&dreamplug_ge00_data);
+ kirkwood_ge01_init(&dreamplug_ge01_data);
+ kirkwood_sata_init(&dreamplug_sata_data);
+ kirkwood_sdio_init(&dreamplug_mvsdio_data);
+
+ platform_device_register(&dreamplug_leds);
+}
+
+static void __init kirkwood_dt_init(void)
+{
+ kirkwood_init();
+
+ if (of_machine_is_compatible("globalscale,dreamplug"))
+ dreamplug_init();
+
+ of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL);
+}
+
+static const char *kirkwood_dt_board_compat[] = {
+ "globalscale,dreamplug",
+ NULL
+};
+
+DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
+ /* Maintainer: Jason Cooper <jason@lakedaemon.net> */
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+ .init_machine = kirkwood_dt_init,
+ .restart = kirkwood_restart,
+ .dt_compat = kirkwood_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index 617c60a170a4..c709a24a9d25 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -223,6 +223,7 @@ struct resource mmp2_resource_gpio[] = {
}, {
.start = IRQ_MMP2_GPIO,
.end = IRQ_MMP2_GPIO,
+ .name = "gpio_mux",
.flags = IORESOURCE_IRQ,
},
};
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index ada1213982b4..f10f87d8b667 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -166,6 +166,7 @@ struct resource pxa168_resource_gpio[] = {
}, {
.start = IRQ_PXA168_GPIOX,
.end = IRQ_PXA168_GPIOX,
+ .name = "gpio_mux",
.flags = IORESOURCE_IRQ,
},
};
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 3241a25784d0..0c87e69adf9f 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -173,6 +173,7 @@ struct resource pxa910_resource_gpio[] = {
}, {
.start = IRQ_PXA910_AP_GPIO,
.end = IRQ_PXA910_AP_GPIO,
+ .name = "gpio_mux",
.flags = IORESOURCE_IRQ,
},
};
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index cf00b3e3be85..c57f9964a713 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -83,6 +83,18 @@ config MODULE_M28
select MXS_HAVE_PLATFORM_MXSFB
select MXS_OCOTP
+config MODULE_APX4
+ bool
+ select SOC_IMX28
+ select LEDS_GPIO_REGISTER
+ select MXS_HAVE_AMBA_DUART
+ select MXS_HAVE_PLATFORM_AUART
+ select MXS_HAVE_PLATFORM_FEC
+ select MXS_HAVE_PLATFORM_MXS_I2C
+ select MXS_HAVE_PLATFORM_MXS_MMC
+ select MXS_HAVE_PLATFORM_MXS_SAIF
+ select MXS_OCOTP
+
config MACH_TX28
bool "Ka-Ro TX28 module"
select MODULE_TX28
@@ -91,4 +103,8 @@ config MACH_M28EVK
bool "Support DENX M28EVK Platform"
select MODULE_M28
+config MACH_APX4DEVKIT
+ bool "Support Bluegiga APX4 Development Kit"
+ select MODULE_APX4
+
endif
diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
index 8c93b24896bf..908bf9a567f1 100644
--- a/arch/arm/mach-mxs/Makefile
+++ b/arch/arm/mach-mxs/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o
obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o
obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o
obj-$(CONFIG_MACH_M28EVK) += mach-m28evk.o
+obj-$(CONFIG_MACH_APX4DEVKIT) += mach-apx4devkit.o
obj-$(CONFIG_MODULE_TX28) += module-tx28.o
obj-$(CONFIG_MACH_TX28) += mach-tx28.o
diff --git a/arch/arm/mach-mxs/include/mach/digctl.h b/arch/arm/mach-mxs/include/mach/digctl.h
index 49a888c65d6d..17964066303f 100644
--- a/arch/arm/mach-mxs/include/mach/digctl.h
+++ b/arch/arm/mach-mxs/include/mach/digctl.h
@@ -18,4 +18,5 @@
#define HW_DIGCTL_CTRL 0x0
#define BP_DIGCTL_CTRL_SAIF_CLKMUX 10
#define BM_DIGCTL_CTRL_SAIF_CLKMUX (0x3 << 10)
+#define HW_DIGCTL_CHIPID 0x310
#endif
diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h
index bde5f6634747..7d4fb6d0afda 100644
--- a/arch/arm/mach-mxs/include/mach/mxs.h
+++ b/arch/arm/mach-mxs/include/mach/mxs.h
@@ -23,22 +23,10 @@
#include <linux/io.h>
#endif
#include <asm/mach-types.h>
+#include <mach/digctl.h>
#include <mach/hardware.h>
/*
- * MXS CPU types
- */
-#define cpu_is_mx23() ( \
- machine_is_mx23evk() || \
- machine_is_stmp378x() || \
- 0)
-#define cpu_is_mx28() ( \
- machine_is_mx28evk() || \
- machine_is_m28evk() || \
- machine_is_tx28() || \
- 0)
-
-/*
* IO addresses common to MXS-based
*/
#define MXS_IO_BASE_ADDR 0x80000000
@@ -109,6 +97,21 @@ static inline void __mxs_togl(u32 mask, void __iomem *reg)
{
__raw_writel(mask, reg + MXS_TOG_ADDR);
}
+
+/*
+ * MXS CPU types
+ */
+#define MXS_CHIPID (MXS_IO_ADDRESS(MXS_DIGCTL_BASE_ADDR) + HW_DIGCTL_CHIPID)
+
+static inline int cpu_is_mx23(void)
+{
+ return ((__raw_readl(MXS_CHIPID) >> 16) == 0x3780);
+}
+
+static inline int cpu_is_mx28(void)
+{
+ return ((__raw_readl(MXS_CHIPID) >> 16) == 0x2800);
+}
#endif
#endif /* __MACH_MXS_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/uncompress.h b/arch/arm/mach-mxs/include/mach/uncompress.h
index 67776746f143..ef2811495446 100644
--- a/arch/arm/mach-mxs/include/mach/uncompress.h
+++ b/arch/arm/mach-mxs/include/mach/uncompress.h
@@ -18,8 +18,6 @@
#ifndef __MACH_MXS_UNCOMPRESS_H__
#define __MACH_MXS_UNCOMPRESS_H__
-#include <asm/mach-types.h>
-
unsigned long mxs_duart_base;
#define MXS_DUART(x) (*(volatile unsigned long *)(mxs_duart_base + (x)))
@@ -55,16 +53,17 @@ static inline void flush(void)
#define MX23_DUART_BASE_ADDR 0x80070000
#define MX28_DUART_BASE_ADDR 0x80074000
+#define MXS_DIGCTL_CHIPID 0x8001c310
static inline void __arch_decomp_setup(unsigned long arch_id)
{
- switch (arch_id) {
- case MACH_TYPE_MX23EVK:
+ u16 chipid = (*(volatile unsigned long *) MXS_DIGCTL_CHIPID) >> 16;
+
+ switch (chipid) {
+ case 0x3780:
mxs_duart_base = MX23_DUART_BASE_ADDR;
break;
- case MACH_TYPE_MX28EVK:
- case MACH_TYPE_M28EVK:
- case MACH_TYPE_TX28:
+ case 0x2800:
mxs_duart_base = MX28_DUART_BASE_ADDR;
break;
default:
diff --git a/arch/arm/mach-mxs/mach-apx4devkit.c b/arch/arm/mach-mxs/mach-apx4devkit.c
new file mode 100644
index 000000000000..48a7fab571a6
--- /dev/null
+++ b/arch/arm/mach-mxs/mach-apx4devkit.c
@@ -0,0 +1,260 @@
+/*
+ * Copyright (C) 2011-2012
+ * Lauri Hintsala, Bluegiga, <lauri.hintsala@bluegiga.com>
+ * Veli-Pekka Peltola, Bluegiga, <veli-pekka.peltola@bluegiga.com>
+ *
+ * based on: mach-mx28evk.c
+ * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/micrel_phy.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/digctl.h>
+#include <mach/iomux-mx28.h>
+
+#include "devices-mx28.h"
+
+#define APX4DEVKIT_GPIO_USERLED MXS_GPIO_NR(3, 28)
+
+static const iomux_cfg_t apx4devkit_pads[] __initconst = {
+ /* duart */
+ MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
+ MX28_PAD_PWM1__DUART_TX | MXS_PAD_CTRL,
+
+ /* auart0 */
+ MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
+ MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
+ MX28_PAD_AUART0_CTS__AUART0_CTS | MXS_PAD_CTRL,
+ MX28_PAD_AUART0_RTS__AUART0_RTS | MXS_PAD_CTRL,
+
+ /* auart1 */
+ MX28_PAD_AUART1_RX__AUART1_RX | MXS_PAD_CTRL,
+ MX28_PAD_AUART1_TX__AUART1_TX | MXS_PAD_CTRL,
+
+ /* auart2 */
+ MX28_PAD_SSP2_SCK__AUART2_RX | MXS_PAD_CTRL,
+ MX28_PAD_SSP2_MOSI__AUART2_TX | MXS_PAD_CTRL,
+
+ /* auart3 */
+ MX28_PAD_SSP2_MISO__AUART3_RX | MXS_PAD_CTRL,
+ MX28_PAD_SSP2_SS0__AUART3_TX | MXS_PAD_CTRL,
+
+#define MXS_PAD_FEC (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
+ /* fec0 */
+ MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
+ MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
+ MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
+ MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
+ MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
+ MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
+ MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
+ MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
+ MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
+
+ /* i2c */
+ MX28_PAD_I2C0_SCL__I2C0_SCL,
+ MX28_PAD_I2C0_SDA__I2C0_SDA,
+
+ /* mmc0 */
+ MX28_PAD_SSP0_DATA0__SSP0_D0 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA1__SSP0_D1 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA2__SSP0_D2 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA3__SSP0_D3 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA4__SSP0_D4 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA5__SSP0_D5 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA6__SSP0_D6 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA7__SSP0_D7 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_CMD__SSP0_CMD |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ MX28_PAD_SSP0_SCK__SSP0_SCK |
+ (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+
+ /* led */
+ MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL,
+
+ /* saif0 & saif1 */
+ MX28_PAD_SAIF0_MCLK__SAIF0_MCLK |
+ (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK |
+ (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK |
+ (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 |
+ (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 |
+ (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+};
+
+/* led */
+static const struct gpio_led apx4devkit_leds[] __initconst = {
+ {
+ .name = "user-led",
+ .default_trigger = "heartbeat",
+ .gpio = APX4DEVKIT_GPIO_USERLED,
+ },
+};
+
+static const struct gpio_led_platform_data apx4devkit_led_data __initconst = {
+ .leds = apx4devkit_leds,
+ .num_leds = ARRAY_SIZE(apx4devkit_leds),
+};
+
+static const struct fec_platform_data mx28_fec_pdata __initconst = {
+ .phy = PHY_INTERFACE_MODE_RMII,
+};
+
+static const struct mxs_mmc_platform_data apx4devkit_mmc_pdata __initconst = {
+ .wp_gpio = -EINVAL,
+ .flags = SLOTF_4_BIT_CAPABLE,
+};
+
+static const struct i2c_board_info apx4devkit_i2c_boardinfo[] __initconst = {
+ { I2C_BOARD_INFO("sgtl5000", 0x0a) }, /* ASoC */
+ { I2C_BOARD_INFO("pcf8563", 0x51) }, /* RTC */
+};
+
+#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || \
+ defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
+static struct regulator_consumer_supply apx4devkit_audio_consumer_supplies[] = {
+ REGULATOR_SUPPLY("VDDA", "0-000a"),
+ REGULATOR_SUPPLY("VDDIO", "0-000a"),
+};
+
+static struct regulator_init_data apx4devkit_vdd_reg_init_data = {
+ .constraints = {
+ .name = "3V3",
+ .always_on = 1,
+ },
+ .consumer_supplies = apx4devkit_audio_consumer_supplies,
+ .num_consumer_supplies = ARRAY_SIZE(apx4devkit_audio_consumer_supplies),
+};
+
+static struct fixed_voltage_config apx4devkit_vdd_pdata = {
+ .supply_name = "board-3V3",
+ .microvolts = 3300000,
+ .gpio = -EINVAL,
+ .enabled_at_boot = 1,
+ .init_data = &apx4devkit_vdd_reg_init_data,
+};
+
+static struct platform_device apx4devkit_voltage_regulator = {
+ .name = "reg-fixed-voltage",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &apx4devkit_vdd_pdata,
+ },
+};
+
+static void __init apx4devkit_add_regulators(void)
+{
+ platform_device_register(&apx4devkit_voltage_regulator);
+}
+#else
+static void __init apx4devkit_add_regulators(void) {}
+#endif
+
+static const struct mxs_saif_platform_data
+ apx4devkit_mxs_saif_pdata[] __initconst = {
+ /* working on EXTMSTR0 mode (saif0 master, saif1 slave) */
+ {
+ .master_mode = 1,
+ .master_id = 0,
+ }, {
+ .master_mode = 0,
+ .master_id = 0,
+ },
+};
+
+static int apx4devkit_phy_fixup(struct phy_device *phy)
+{
+ phy->dev_flags |= MICREL_PHY_50MHZ_CLK;
+ return 0;
+}
+
+static void __init apx4devkit_init(void)
+{
+ mxs_iomux_setup_multiple_pads(apx4devkit_pads,
+ ARRAY_SIZE(apx4devkit_pads));
+
+ mx28_add_duart();
+ mx28_add_auart0();
+ mx28_add_auart1();
+ mx28_add_auart2();
+ mx28_add_auart3();
+
+ /*
+ * Register fixup for the Micrel KS8031 PHY clock
+ * (shares same ID with KS8051)
+ */
+ phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK,
+ apx4devkit_phy_fixup);
+
+ mx28_add_fec(0, &mx28_fec_pdata);
+
+ mx28_add_mxs_mmc(0, &apx4devkit_mmc_pdata);
+
+ gpio_led_register_device(0, &apx4devkit_led_data);
+
+ mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
+ mx28_add_saif(0, &apx4devkit_mxs_saif_pdata[0]);
+ mx28_add_saif(1, &apx4devkit_mxs_saif_pdata[1]);
+
+ apx4devkit_add_regulators();
+
+ mx28_add_mxs_i2c(0);
+ i2c_register_board_info(0, apx4devkit_i2c_boardinfo,
+ ARRAY_SIZE(apx4devkit_i2c_boardinfo));
+
+ mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0, NULL, 0);
+}
+
+static void __init apx4devkit_timer_init(void)
+{
+ mx28_clocks_init();
+}
+
+static struct sys_timer apx4devkit_timer = {
+ .init = apx4devkit_timer_init,
+};
+
+MACHINE_START(APX4DEVKIT, "Bluegiga APX4 Development Kit")
+ .map_io = mx28_map_io,
+ .init_irq = mx28_init_irq,
+ .timer = &apx4devkit_timer,
+ .init_machine = apx4devkit_init,
+ .restart = mxs_restart,
+MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c
index 2f2758230edf..06d79963611c 100644
--- a/arch/arm/mach-mxs/mach-m28evk.c
+++ b/arch/arm/mach-mxs/mach-m28evk.c
@@ -247,18 +247,15 @@ static int __init m28evk_fec_get_mac(void)
u32 val;
const u32 *ocotp = mxs_get_ocotp();
- if (!ocotp) {
- pr_err("%s: timeout when reading fec mac from OCOTP\n",
- __func__);
+ if (!ocotp)
return -ETIMEDOUT;
- }
/*
* OCOTP only stores the last 4 octets for each mac address,
* so hard-code DENX OUI (C0:E5:4E) here.
*/
for (i = 0; i < 2; i++) {
- val = ocotp[i * 4];
+ val = ocotp[i];
mx28_fec_pdata[i].mac[0] = 0xC0;
mx28_fec_pdata[i].mac[1] = 0xE5;
mx28_fec_pdata[i].mac[2] = 0x4E;
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index fdb0a5664dd6..e386c142f93c 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -223,7 +223,6 @@ static const struct gpio_led_platform_data mx28evk_led_data __initconst = {
/* fec */
static void __init mx28evk_fec_reset(void)
{
- int ret;
struct clk *clk;
/* Enable fec phy clock */
@@ -231,32 +230,7 @@ static void __init mx28evk_fec_reset(void)
if (!IS_ERR(clk))
clk_prepare_enable(clk);
- /* Power up fec phy */
- ret = gpio_request(MX28EVK_FEC_PHY_POWER, "fec-phy-power");
- if (ret) {
- pr_err("Failed to request gpio fec-phy-%s: %d\n", "power", ret);
- return;
- }
-
- ret = gpio_direction_output(MX28EVK_FEC_PHY_POWER, 0);
- if (ret) {
- pr_err("Failed to drive gpio fec-phy-%s: %d\n", "power", ret);
- return;
- }
-
- /* Reset fec phy */
- ret = gpio_request(MX28EVK_FEC_PHY_RESET, "fec-phy-reset");
- if (ret) {
- pr_err("Failed to request gpio fec-phy-%s: %d\n", "reset", ret);
- return;
- }
-
- gpio_direction_output(MX28EVK_FEC_PHY_RESET, 0);
- if (ret) {
- pr_err("Failed to drive gpio fec-phy-%s: %d\n", "reset", ret);
- return;
- }
-
+ gpio_set_value(MX28EVK_FEC_PHY_RESET, 0);
mdelay(1);
gpio_set_value(MX28EVK_FEC_PHY_RESET, 1);
}
@@ -278,14 +252,14 @@ static int __init mx28evk_fec_get_mac(void)
const u32 *ocotp = mxs_get_ocotp();
if (!ocotp)
- goto error;
+ return -ETIMEDOUT;
/*
* OCOTP only stores the last 4 octets for each mac address,
* so hard-code Freescale OUI (00:04:9f) here.
*/
for (i = 0; i < 2; i++) {
- val = ocotp[i * 4];
+ val = ocotp[i];
mx28_fec_pdata[i].mac[0] = 0x00;
mx28_fec_pdata[i].mac[1] = 0x04;
mx28_fec_pdata[i].mac[2] = 0x9f;
@@ -295,10 +269,6 @@ static int __init mx28evk_fec_get_mac(void)
}
return 0;
-
-error:
- pr_err("%s: timeout when reading fec mac from OCOTP\n", __func__);
- return -ETIMEDOUT;
}
/*
@@ -417,9 +387,14 @@ static void __init mx28evk_add_regulators(void)
static void __init mx28evk_add_regulators(void) {}
#endif
-static struct gpio mx28evk_lcd_gpios[] = {
+static const struct gpio mx28evk_gpios[] __initconst = {
{ MX28EVK_LCD_ENABLE, GPIOF_OUT_INIT_HIGH, "lcd-enable" },
{ MX28EVK_BL_ENABLE, GPIOF_OUT_INIT_HIGH, "bl-enable" },
+ { MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT, "flexcan-switch" },
+ { MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc0-slot-power" },
+ { MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc1-slot-power" },
+ { MX28EVK_FEC_PHY_POWER, GPIOF_OUT_INIT_LOW, "fec-phy-power" },
+ { MX28EVK_FEC_PHY_RESET, GPIOF_DIR_OUT, "fec-phy-reset" },
};
static const struct mxs_saif_platform_data
@@ -447,25 +422,18 @@ static void __init mx28evk_init(void)
if (mx28evk_fec_get_mac())
pr_warn("%s: failed on fec mac setup\n", __func__);
+ ret = gpio_request_array(mx28evk_gpios, ARRAY_SIZE(mx28evk_gpios));
+ if (ret)
+ pr_err("One or more GPIOs failed to be requested: %d\n", ret);
+
mx28evk_fec_reset();
mx28_add_fec(0, &mx28_fec_pdata[0]);
mx28_add_fec(1, &mx28_fec_pdata[1]);
- ret = gpio_request_one(MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT,
- "flexcan-switch");
- if (ret) {
- pr_err("failed to request gpio flexcan-switch: %d\n", ret);
- } else {
- mx28_add_flexcan(0, &mx28evk_flexcan_pdata[0]);
- mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]);
- }
+ mx28_add_flexcan(0, &mx28evk_flexcan_pdata[0]);
+ mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]);
- ret = gpio_request_array(mx28evk_lcd_gpios,
- ARRAY_SIZE(mx28evk_lcd_gpios));
- if (ret)
- pr_warn("failed to request gpio pins for lcd: %d\n", ret);
- else
- mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
+ mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
mx28_add_saif(0, &mx28evk_mxs_saif_pdata[0]);
@@ -480,20 +448,8 @@ static void __init mx28evk_init(void)
mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0,
NULL, 0);
- /* power on mmc slot by writing 0 to the gpio */
- ret = gpio_request_one(MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW,
- "mmc0-slot-power");
- if (ret)
- pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);
- else
- mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
-
- ret = gpio_request_one(MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW,
- "mmc1-slot-power");
- if (ret)
- pr_warn("failed to request gpio mmc1-slot-power: %d\n", ret);
- else
- mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
+ mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
+ mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
mx28_add_rtc_stmp3xxx();
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 922ab0dc2bcd..dfab466ebd1d 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -152,6 +152,10 @@ config MACH_AMS_DELTA
bool "Amstrad E3 (Delta)"
depends on ARCH_OMAP1 && ARCH_OMAP15XX
select FIQ
+ select GPIO_GENERIC_PLATFORM
+ select LEDS_GPIO_REGISTER
+ select REGULATOR
+ select REGULATOR_FIXED_VOLTAGE
help
Support for the Amstrad E3 (codename Delta) videophone. Say Y here
if you have such a device.
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 83eac744ddb9..c1b681ef4cba 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -11,6 +11,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/basic_mmio_gpio.h>
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -18,6 +19,9 @@
#include <linux/interrupt.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/serial_8250.h>
#include <linux/export.h>
#include <linux/omapfb.h>
@@ -43,9 +47,6 @@
#include "iomap.h"
#include "common.h"
-static u8 ams_delta_latch1_reg;
-static u16 ams_delta_latch2_reg;
-
static const unsigned int ams_delta_keymap[] = {
KEY(0, 0, KEY_F1), /* Advert */
@@ -124,54 +125,188 @@ static const unsigned int ams_delta_keymap[] = {
KEY(7, 3, KEY_LEFTCTRL), /* Vol down */
};
-void ams_delta_latch1_write(u8 mask, u8 value)
-{
- ams_delta_latch1_reg &= ~mask;
- ams_delta_latch1_reg |= value;
- *(volatile __u8 *) AMS_DELTA_LATCH1_VIRT = ams_delta_latch1_reg;
-}
-
-void ams_delta_latch2_write(u16 mask, u16 value)
-{
- ams_delta_latch2_reg &= ~mask;
- ams_delta_latch2_reg |= value;
- *(volatile __u16 *) AMS_DELTA_LATCH2_VIRT = ams_delta_latch2_reg;
-}
+#define LATCH1_PHYS 0x01000000
+#define LATCH1_VIRT 0xEA000000
+#define MODEM_PHYS 0x04000000
+#define MODEM_VIRT 0xEB000000
+#define LATCH2_PHYS 0x08000000
+#define LATCH2_VIRT 0xEC000000
static struct map_desc ams_delta_io_desc[] __initdata = {
/* AMS_DELTA_LATCH1 */
{
- .virtual = AMS_DELTA_LATCH1_VIRT,
- .pfn = __phys_to_pfn(AMS_DELTA_LATCH1_PHYS),
+ .virtual = LATCH1_VIRT,
+ .pfn = __phys_to_pfn(LATCH1_PHYS),
.length = 0x01000000,
.type = MT_DEVICE
},
/* AMS_DELTA_LATCH2 */
{
- .virtual = AMS_DELTA_LATCH2_VIRT,
- .pfn = __phys_to_pfn(AMS_DELTA_LATCH2_PHYS),
+ .virtual = LATCH2_VIRT,
+ .pfn = __phys_to_pfn(LATCH2_PHYS),
.length = 0x01000000,
.type = MT_DEVICE
},
/* AMS_DELTA_MODEM */
{
- .virtual = AMS_DELTA_MODEM_VIRT,
- .pfn = __phys_to_pfn(AMS_DELTA_MODEM_PHYS),
+ .virtual = MODEM_VIRT,
+ .pfn = __phys_to_pfn(MODEM_PHYS),
.length = 0x01000000,
.type = MT_DEVICE
}
};
-static struct omap_lcd_config ams_delta_lcd_config = {
+static struct omap_lcd_config ams_delta_lcd_config __initdata = {
.ctrl_name = "internal",
};
-static struct omap_usb_config ams_delta_usb_config __initdata = {
+static struct omap_usb_config ams_delta_usb_config = {
.register_host = 1,
.hmc_mode = 16,
.pins[0] = 2,
};
+#define LATCH1_GPIO_BASE 232
+#define LATCH1_NGPIO 8
+
+static struct resource latch1_resources[] = {
+ [0] = {
+ .name = "dat",
+ .start = LATCH1_PHYS,
+ .end = LATCH1_PHYS + (LATCH1_NGPIO - 1) / 8,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct bgpio_pdata latch1_pdata = {
+ .base = LATCH1_GPIO_BASE,
+ .ngpio = LATCH1_NGPIO,
+};
+
+static struct platform_device latch1_gpio_device = {
+ .name = "basic-mmio-gpio",
+ .id = 0,
+ .resource = latch1_resources,
+ .num_resources = ARRAY_SIZE(latch1_resources),
+ .dev = {
+ .platform_data = &latch1_pdata,
+ },
+};
+
+static struct resource latch2_resources[] = {
+ [0] = {
+ .name = "dat",
+ .start = LATCH2_PHYS,
+ .end = LATCH2_PHYS + (AMS_DELTA_LATCH2_NGPIO - 1) / 8,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct bgpio_pdata latch2_pdata = {
+ .base = AMS_DELTA_LATCH2_GPIO_BASE,
+ .ngpio = AMS_DELTA_LATCH2_NGPIO,
+};
+
+static struct platform_device latch2_gpio_device = {
+ .name = "basic-mmio-gpio",
+ .id = 1,
+ .resource = latch2_resources,
+ .num_resources = ARRAY_SIZE(latch2_resources),
+ .dev = {
+ .platform_data = &latch2_pdata,
+ },
+};
+
+static const struct gpio latch_gpios[] __initconst = {
+ {
+ .gpio = LATCH1_GPIO_BASE + 6,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "dockit1",
+ },
+ {
+ .gpio = LATCH1_GPIO_BASE + 7,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "dockit2",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_SCARD_RSTIN,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "scard_rstin",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_SCARD_CMDVCC,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "scard_cmdvcc",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_MODEM_CODEC,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "modem_codec",
+ },
+ {
+ .gpio = AMS_DELTA_LATCH2_GPIO_BASE + 14,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "hookflash1",
+ },
+ {
+ .gpio = AMS_DELTA_LATCH2_GPIO_BASE + 15,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "hookflash2",
+ },
+};
+
+static struct regulator_consumer_supply modem_nreset_consumers[] = {
+ REGULATOR_SUPPLY("RESET#", "serial8250.1"),
+ REGULATOR_SUPPLY("POR", "cx20442-codec"),
+};
+
+static struct regulator_init_data modem_nreset_data = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(modem_nreset_consumers),
+ .consumer_supplies = modem_nreset_consumers,
+};
+
+static struct fixed_voltage_config modem_nreset_config = {
+ .supply_name = "modem_nreset",
+ .microvolts = 3300000,
+ .gpio = AMS_DELTA_GPIO_PIN_MODEM_NRESET,
+ .startup_delay = 25000,
+ .enable_high = 1,
+ .enabled_at_boot = 1,
+ .init_data = &modem_nreset_data,
+};
+
+static struct platform_device modem_nreset_device = {
+ .name = "reg-fixed-voltage",
+ .id = -1,
+ .dev = {
+ .platform_data = &modem_nreset_config,
+ },
+};
+
+struct modem_private_data {
+ struct regulator *regulator;
+};
+
+static struct modem_private_data modem_priv;
+
+void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value)
+{
+ int bit = 0;
+ u16 bitpos = 1 << bit;
+
+ for (; bit < ngpio; bit++, bitpos = bitpos << 1) {
+ if (!(mask & bitpos))
+ continue;
+ else
+ gpio_set_value(base + bit, (value & bitpos) != 0);
+ }
+}
+EXPORT_SYMBOL(ams_delta_latch_write);
+
static struct resource ams_delta_nand_resources[] = {
[0] = {
.start = OMAP1_MPUIO_BASE,
@@ -201,7 +336,7 @@ static const struct matrix_keymap_data ams_delta_keymap_data = {
.keymap_size = ARRAY_SIZE(ams_delta_keymap),
};
-static struct omap_kp_platform_data ams_delta_kp_data __initdata = {
+static struct omap_kp_platform_data ams_delta_kp_data = {
.rows = 8,
.cols = 8,
.keymap_data = &ams_delta_keymap_data,
@@ -223,9 +358,45 @@ static struct platform_device ams_delta_lcd_device = {
.id = -1,
};
-static struct platform_device ams_delta_led_device = {
- .name = "ams-delta-led",
- .id = -1
+static const struct gpio_led gpio_leds[] __initconst = {
+ {
+ .name = "camera",
+ .gpio = LATCH1_GPIO_BASE + 0,
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+#ifdef CONFIG_LEDS_TRIGGERS
+ .default_trigger = "ams_delta_camera",
+#endif
+ },
+ {
+ .name = "advert",
+ .gpio = LATCH1_GPIO_BASE + 1,
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ },
+ {
+ .name = "email",
+ .gpio = LATCH1_GPIO_BASE + 2,
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ },
+ {
+ .name = "handsfree",
+ .gpio = LATCH1_GPIO_BASE + 3,
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ },
+ {
+ .name = "voicemail",
+ .gpio = LATCH1_GPIO_BASE + 4,
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ },
+ {
+ .name = "voice",
+ .gpio = LATCH1_GPIO_BASE + 5,
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ },
+};
+
+static const struct gpio_led_platform_data leds_pdata __initconst = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
};
static struct i2c_board_info ams_delta_camera_board_info[] = {
@@ -274,13 +445,17 @@ static struct omap1_cam_platform_data ams_delta_camera_platform_data = {
};
static struct platform_device *ams_delta_devices[] __initdata = {
- &ams_delta_nand_device,
+ &latch1_gpio_device,
+ &latch2_gpio_device,
&ams_delta_kp_device,
- &ams_delta_lcd_device,
- &ams_delta_led_device,
&ams_delta_camera_device,
};
+static struct platform_device *late_devices[] __initdata = {
+ &ams_delta_nand_device,
+ &ams_delta_lcd_device,
+};
+
static void __init ams_delta_init(void)
{
/* mux pins for uarts */
@@ -304,15 +479,13 @@ static void __init ams_delta_init(void)
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
- /* Clear latch2 (NAND, LCD, modem enable) */
- ams_delta_latch2_write(~0, 0);
-
omap1_usb_init(&ams_delta_usb_config);
omap1_set_camera_info(&ams_delta_camera_platform_data);
#ifdef CONFIG_LEDS_TRIGGERS
led_trigger_register_simple("ams_delta_camera",
&ams_delta_camera_led_trigger);
#endif
+ gpio_led_register_device(-1, &leds_pdata);
platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
ams_delta_init_fiq();
@@ -322,16 +495,34 @@ static void __init ams_delta_init(void)
omapfb_set_lcd_config(&ams_delta_lcd_config);
}
+static void modem_pm(struct uart_port *port, unsigned int state, unsigned old)
+{
+ struct modem_private_data *priv = port->private_data;
+
+ if (IS_ERR(priv->regulator))
+ return;
+
+ if (state == old)
+ return;
+
+ if (state == 0)
+ regulator_enable(priv->regulator);
+ else if (old == 0)
+ regulator_disable(priv->regulator);
+}
+
static struct plat_serial8250_port ams_delta_modem_ports[] = {
{
- .membase = IOMEM(AMS_DELTA_MODEM_VIRT),
- .mapbase = AMS_DELTA_MODEM_PHYS,
+ .membase = IOMEM(MODEM_VIRT),
+ .mapbase = MODEM_PHYS,
.irq = -EINVAL, /* changed later */
.flags = UPF_BOOT_AUTOCONF,
.irqflags = IRQF_TRIGGER_RISING,
.iotype = UPIO_MEM,
.regshift = 1,
.uartclk = BASE_BAUD * 16,
+ .pm = modem_pm,
+ .private_data = &modem_priv,
},
{ },
};
@@ -344,13 +535,27 @@ static struct platform_device ams_delta_modem_device = {
},
};
-static int __init ams_delta_modem_init(void)
+static int __init late_init(void)
{
int err;
if (!machine_is_ams_delta())
return -ENODEV;
+ err = gpio_request_array(latch_gpios, ARRAY_SIZE(latch_gpios));
+ if (err) {
+ pr_err("Couldn't take over latch1/latch2 GPIO pins\n");
+ return err;
+ }
+
+ platform_add_devices(late_devices, ARRAY_SIZE(late_devices));
+
+ err = platform_device_register(&modem_nreset_device);
+ if (err) {
+ pr_err("Couldn't register the modem regulator device\n");
+ return err;
+ }
+
omap_cfg_reg(M14_1510_GPIO2);
ams_delta_modem_ports[0].irq =
gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
@@ -362,13 +567,35 @@ static int __init ams_delta_modem_init(void)
}
gpio_direction_input(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
- ams_delta_latch2_write(
- AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC,
- AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC);
+ /* Initialize the modem_nreset regulator consumer before use */
+ modem_priv.regulator = ERR_PTR(-ENODEV);
+
+ ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC,
+ AMS_DELTA_LATCH2_MODEM_CODEC);
+
+ err = platform_device_register(&ams_delta_modem_device);
+ if (err)
+ goto gpio_free;
- return platform_device_register(&ams_delta_modem_device);
+ /*
+ * Once the modem device is registered, the modem_nreset
+ * regulator can be requested on behalf of that device.
+ */
+ modem_priv.regulator = regulator_get(&ams_delta_modem_device.dev,
+ "RESET#");
+ if (IS_ERR(modem_priv.regulator)) {
+ err = PTR_ERR(modem_priv.regulator);
+ goto unregister;
+ }
+ return 0;
+
+unregister:
+ platform_device_unregister(&ams_delta_modem_device);
+gpio_free:
+ gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
+ return err;
}
-arch_initcall(ams_delta_modem_init);
+late_initcall(late_init);
static void __init ams_delta_map_io(void)
{
@@ -387,6 +614,3 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
.timer = &omap1_timer,
.restart = omap1_restart,
MACHINE_END
-
-EXPORT_SYMBOL(ams_delta_latch1_write);
-EXPORT_SYMBOL(ams_delta_latch2_write);
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 21a4095a1000..36b371face3d 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -245,10 +245,11 @@ config MACH_NOKIA_N8X0
select MACH_NOKIA_N810_WIMAX
config MACH_NOKIA_RM680
- bool "Nokia RM-680 board"
+ bool "Nokia RM-680/696 board"
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBB
+ select MACH_NOKIA_RM696
config MACH_NOKIA_RX51
bool "Nokia RX-51 board"
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 3f850fca8c92..49f92bc1c311 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -270,4 +270,7 @@ ifneq ($(CONFIG_HWSPINLOCK_OMAP),)
obj-y += hwspinlock.o
endif
+emac-$(CONFIG_TI_DAVINCI_EMAC) := am35xx-emac.o
+obj-y += $(emac-m) $(emac-y)
+
obj-y += common-board-devices.o twl-common.o
diff --git a/arch/arm/mach-omap2/am35xx-emac.c b/arch/arm/mach-omap2/am35xx-emac.c
new file mode 100644
index 000000000000..1f97e7475206
--- /dev/null
+++ b/arch/arm/mach-omap2/am35xx-emac.c
@@ -0,0 +1,117 @@
+/*
+ * Copyright (C) 2011 Ilya Yanok, Emcraft Systems
+ *
+ * Based on mach-omap2/board-am3517evm.c
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ * Author: Ranjith Lohithakshan <ranjithl@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
+ * whether express or implied; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/davinci_emac.h>
+#include <linux/platform_device.h>
+#include <plat/irqs.h>
+#include <mach/am35xx.h>
+
+#include "control.h"
+
+static struct mdio_platform_data am35xx_emac_mdio_pdata;
+
+static struct resource am35xx_emac_mdio_resources[] = {
+ DEFINE_RES_MEM(AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET, SZ_4K),
+};
+
+static struct platform_device am35xx_emac_mdio_device = {
+ .name = "davinci_mdio",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(am35xx_emac_mdio_resources),
+ .resource = am35xx_emac_mdio_resources,
+ .dev.platform_data = &am35xx_emac_mdio_pdata,
+};
+
+static void am35xx_enable_emac_int(void)
+{
+ u32 regval;
+
+ regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+ regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
+ AM35XX_CPGMAC_C0_TX_PULSE_CLR |
+ AM35XX_CPGMAC_C0_MISC_PULSE_CLR |
+ AM35XX_CPGMAC_C0_RX_THRESH_CLR);
+ omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
+ regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+}
+
+static void am35xx_disable_emac_int(void)
+{
+ u32 regval;
+
+ regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+ regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
+ AM35XX_CPGMAC_C0_TX_PULSE_CLR);
+ omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
+ regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+}
+
+static struct emac_platform_data am35xx_emac_pdata = {
+ .ctrl_reg_offset = AM35XX_EMAC_CNTRL_OFFSET,
+ .ctrl_mod_reg_offset = AM35XX_EMAC_CNTRL_MOD_OFFSET,
+ .ctrl_ram_offset = AM35XX_EMAC_CNTRL_RAM_OFFSET,
+ .ctrl_ram_size = AM35XX_EMAC_CNTRL_RAM_SIZE,
+ .hw_ram_addr = AM35XX_EMAC_HW_RAM_ADDR,
+ .version = EMAC_VERSION_2,
+ .interrupt_enable = am35xx_enable_emac_int,
+ .interrupt_disable = am35xx_disable_emac_int,
+};
+
+static struct resource am35xx_emac_resources[] = {
+ DEFINE_RES_MEM(AM35XX_IPSS_EMAC_BASE, 0x30000),
+ DEFINE_RES_IRQ(INT_35XX_EMAC_C0_RXTHRESH_IRQ),
+ DEFINE_RES_IRQ(INT_35XX_EMAC_C0_RX_PULSE_IRQ),
+ DEFINE_RES_IRQ(INT_35XX_EMAC_C0_TX_PULSE_IRQ),
+ DEFINE_RES_IRQ(INT_35XX_EMAC_C0_MISC_PULSE_IRQ),
+};
+
+static struct platform_device am35xx_emac_device = {
+ .name = "davinci_emac",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(am35xx_emac_resources),
+ .resource = am35xx_emac_resources,
+ .dev = {
+ .platform_data = &am35xx_emac_pdata,
+ },
+};
+
+void __init am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en)
+{
+ unsigned int regval;
+ int err;
+
+ am35xx_emac_pdata.rmii_en = rmii_en;
+ am35xx_emac_mdio_pdata.bus_freq = mdio_bus_freq;
+ err = platform_device_register(&am35xx_emac_device);
+ if (err) {
+ pr_err("AM35x: failed registering EMAC device: %d\n", err);
+ return;
+ }
+
+ err = platform_device_register(&am35xx_emac_mdio_device);
+ if (err) {
+ pr_err("AM35x: failed registering EMAC MDIO device: %d\n", err);
+ platform_device_unregister(&am35xx_emac_device);
+ return;
+ }
+
+ regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+ regval = regval & (~(AM35XX_CPGMACSS_SW_RST));
+ omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
+ regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+}
diff --git a/arch/arm/mach-omap2/am35xx-emac.h b/arch/arm/mach-omap2/am35xx-emac.h
new file mode 100644
index 000000000000..15c6f9ce59a2
--- /dev/null
+++ b/arch/arm/mach-omap2/am35xx-emac.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2011 Ilya Yanok, Emcraft Systems
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define AM35XX_DEFAULT_MDIO_FREQUENCY 1000000
+
+#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE)
+void am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en);
+#else
+static inline void am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en) {}
+#endif
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 890c446e7b35..30768c2f53fd 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -324,7 +324,10 @@ static struct spi_board_info sdp4430_spi_board_info[] __initdata = {
.bus_num = 1,
.chip_select = 0,
.max_speed_hz = 24000000,
- .irq = ETH_KS8851_IRQ,
+ /*
+ * .irq is set to gpio_to_irq(ETH_KS8851_IRQ)
+ * in omap_4430sdp_init
+ */
},
};
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 71138a1271d8..3645285a3e2b 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -39,124 +39,11 @@
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-dvi.h>
+#include "am35xx-emac.h"
#include "mux.h"
#include "control.h"
#include "hsmmc.h"
-#define AM35XX_EVM_MDIO_FREQUENCY (1000000)
-
-static struct mdio_platform_data am3517_evm_mdio_pdata = {
- .bus_freq = AM35XX_EVM_MDIO_FREQUENCY,
-};
-
-static struct resource am3517_mdio_resources[] = {
- {
- .start = AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET,
- .end = AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET +
- SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device am3517_mdio_device = {
- .name = "davinci_mdio",
- .id = 0,
- .num_resources = ARRAY_SIZE(am3517_mdio_resources),
- .resource = am3517_mdio_resources,
- .dev.platform_data = &am3517_evm_mdio_pdata,
-};
-
-static struct emac_platform_data am3517_evm_emac_pdata = {
- .rmii_en = 1,
-};
-
-static struct resource am3517_emac_resources[] = {
- {
- .start = AM35XX_IPSS_EMAC_BASE,
- .end = AM35XX_IPSS_EMAC_BASE + 0x2FFFF,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = INT_35XX_EMAC_C0_RXTHRESH_IRQ,
- .end = INT_35XX_EMAC_C0_RXTHRESH_IRQ,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = INT_35XX_EMAC_C0_RX_PULSE_IRQ,
- .end = INT_35XX_EMAC_C0_RX_PULSE_IRQ,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = INT_35XX_EMAC_C0_TX_PULSE_IRQ,
- .end = INT_35XX_EMAC_C0_TX_PULSE_IRQ,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = INT_35XX_EMAC_C0_MISC_PULSE_IRQ,
- .end = INT_35XX_EMAC_C0_MISC_PULSE_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device am3517_emac_device = {
- .name = "davinci_emac",
- .id = -1,
- .num_resources = ARRAY_SIZE(am3517_emac_resources),
- .resource = am3517_emac_resources,
-};
-
-static void am3517_enable_ethernet_int(void)
-{
- u32 regval;
-
- regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
- regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
- AM35XX_CPGMAC_C0_TX_PULSE_CLR |
- AM35XX_CPGMAC_C0_MISC_PULSE_CLR |
- AM35XX_CPGMAC_C0_RX_THRESH_CLR);
- omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
- regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-}
-
-static void am3517_disable_ethernet_int(void)
-{
- u32 regval;
-
- regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
- regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
- AM35XX_CPGMAC_C0_TX_PULSE_CLR);
- omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
- regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-}
-
-static void am3517_evm_ethernet_init(struct emac_platform_data *pdata)
-{
- unsigned int regval;
-
- pdata->ctrl_reg_offset = AM35XX_EMAC_CNTRL_OFFSET;
- pdata->ctrl_mod_reg_offset = AM35XX_EMAC_CNTRL_MOD_OFFSET;
- pdata->ctrl_ram_offset = AM35XX_EMAC_CNTRL_RAM_OFFSET;
- pdata->ctrl_ram_size = AM35XX_EMAC_CNTRL_RAM_SIZE;
- pdata->version = EMAC_VERSION_2;
- pdata->hw_ram_addr = AM35XX_EMAC_HW_RAM_ADDR;
- pdata->interrupt_enable = am3517_enable_ethernet_int;
- pdata->interrupt_disable = am3517_disable_ethernet_int;
- am3517_emac_device.dev.platform_data = pdata;
- platform_device_register(&am3517_emac_device);
- platform_device_register(&am3517_mdio_device);
- clk_add_alias(NULL, dev_name(&am3517_mdio_device.dev),
- NULL, &am3517_emac_device.dev);
-
- regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
- regval = regval & (~(AM35XX_CPGMACSS_SW_RST));
- omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
- regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
-
- return ;
-}
-
-
-
#define LCD_PANEL_PWR 176
#define LCD_PANEL_BKLIGHT_PWR 182
#define LCD_PANEL_PWM 181
@@ -498,7 +385,7 @@ static void __init am3517_evm_init(void)
i2c_register_board_info(1, am3517evm_i2c1_boardinfo,
ARRAY_SIZE(am3517evm_i2c1_boardinfo));
/*Ethernet*/
- am3517_evm_ethernet_init(&am3517_evm_emac_pdata);
+ am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1);
/* MUSB */
am3517_evm_musb_init();
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index f36d694d2159..9e66e167e4f3 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -49,6 +49,7 @@
#include "mux.h"
#include "control.h"
#include "common-board-devices.h"
+#include "am35xx-emac.h"
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
static struct gpio_led cm_t3517_leds[] = {
@@ -291,6 +292,7 @@ static void __init cm_t3517_init(void)
cm_t3517_init_rtc();
cm_t3517_init_usbh();
cm_t3517_init_hecc();
+ am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1);
}
MACHINE_START(CM_T3517, "Compulab CM-T3517")
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 2304ba340e99..4a7d8c8a75da 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -205,6 +205,7 @@ static void __init omap3logic_init(void)
MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
.atag_offset = 0x100,
+ .reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
@@ -216,6 +217,7 @@ MACHINE_END
MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
.atag_offset = 0x100,
+ .reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 7184b8b9e38f..33d995d0f075 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -121,6 +121,11 @@ static struct platform_device pandora_leds_gpio = {
},
};
+static struct platform_device pandora_backlight = {
+ .name = "pandora-backlight",
+ .id = -1,
+};
+
#define GPIO_BUTTON(gpio_num, ev_type, ev_code, act_low, descr) \
{ \
.gpio = gpio_num, \
@@ -478,6 +483,10 @@ static struct platform_device pandora_vwlan_device = {
static struct twl4030_bci_platform_data pandora_bci_data;
+static struct twl4030_power_data pandora_power_data = {
+ .use_poweroff = true,
+};
+
static struct twl4030_platform_data omap3pandora_twldata = {
.gpio = &omap3pandora_gpio_data,
.vmmc1 = &pandora_vmmc1,
@@ -488,6 +497,7 @@ static struct twl4030_platform_data omap3pandora_twldata = {
.vsim = &pandora_vsim,
.keypad = &pandora_kp_data,
.bci = &pandora_bci_data,
+ .power = &pandora_power_data,
};
static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = {
@@ -559,6 +569,7 @@ static struct platform_device *omap3pandora_devices[] __initdata = {
&pandora_leds_gpio,
&pandora_keys_gpio,
&pandora_vwlan_device,
+ &pandora_backlight,
};
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 866411d4fe65..e9071a57c37b 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -116,10 +116,16 @@ static struct platform_device panda_abe_audio = {
},
};
+static struct platform_device btwilink_device = {
+ .name = "btwilink",
+ .id = -1,
+};
+
static struct platform_device *panda_devices[] __initdata = {
&leds_gpio,
&wl1271_device,
&panda_abe_audio,
+ &btwilink_device,
};
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 2d24c98f3d45..ae53d71f0ce0 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -1,5 +1,5 @@
/*
- * Board support file for Nokia RM-680.
+ * Board support file for Nokia RM-680/696.
*
* Copyright (C) 2010 Nokia
*
@@ -154,3 +154,15 @@ MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
.timer = &omap3_timer,
.restart = omap_prcm_restart,
MACHINE_END
+
+MACHINE_START(NOKIA_RM696, "Nokia RM-696 board")
+ .atag_offset = 0x100,
+ .reserve = omap_reserve,
+ .map_io = omap3_map_io,
+ .init_early = omap3630_init_early,
+ .init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
+ .init_machine = rm680_init,
+ .timer = &omap3_timer,
+ .restart = omap_prcm_restart,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 0f65c3b202ac..16aebfb8a7ec 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -1102,6 +1102,11 @@ static struct tsc2005_platform_data tsc2005_pdata = {
.esd_timeout_ms = 8000,
};
+static struct gpio rx51_tsc2005_gpios[] __initdata = {
+ { RX51_TSC2005_IRQ_GPIO, GPIOF_IN, "tsc2005 IRQ" },
+ { RX51_TSC2005_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "tsc2005 reset" },
+};
+
static void rx51_tsc2005_set_reset(bool enable)
{
gpio_set_value(RX51_TSC2005_RESET_GPIO, enable);
@@ -1111,20 +1116,18 @@ static void __init rx51_init_tsc2005(void)
{
int r;
- r = gpio_request_one(RX51_TSC2005_IRQ_GPIO, GPIOF_IN, "tsc2005 IRQ");
- if (r < 0) {
- printk(KERN_ERR "unable to get %s GPIO\n", "tsc2005 IRQ");
- rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq = 0;
- }
+ omap_mux_init_gpio(RX51_TSC2005_RESET_GPIO, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(RX51_TSC2005_IRQ_GPIO, OMAP_PIN_INPUT_PULLUP);
- r = gpio_request_one(RX51_TSC2005_RESET_GPIO, GPIOF_OUT_INIT_HIGH,
- "tsc2005 reset");
- if (r >= 0) {
- tsc2005_pdata.set_reset = rx51_tsc2005_set_reset;
- } else {
- printk(KERN_ERR "unable to get %s GPIO\n", "tsc2005 reset");
+ r = gpio_request_array(rx51_tsc2005_gpios,
+ ARRAY_SIZE(rx51_tsc2005_gpios));
+ if (r < 0) {
+ printk(KERN_ERR "tsc2005 board initialization failed\n");
tsc2005_pdata.esd_timeout_ms = 0;
+ return;
}
+
+ tsc2005_pdata.set_reset = rx51_tsc2005_set_reset;
}
void __init rx51_peripherals_init(void)
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 208eef1c0485..f309bf975202 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -97,9 +97,9 @@ static unsigned long hx4700_pin_config[] __initdata = {
/* BTUART */
GPIO42_BTUART_RXD,
- GPIO43_BTUART_TXD,
+ GPIO43_BTUART_TXD_LPM_LOW,
GPIO44_BTUART_CTS,
- GPIO45_BTUART_RTS,
+ GPIO45_BTUART_RTS_LPM_LOW,
/* PWM 1 (Backlight) */
GPIO17_PWM1_OUT,
@@ -245,6 +245,21 @@ static u16 asic3_gpio_config[] = {
ASIC3_GPIOD15_nPIOW,
};
+static struct asic3_led asic3_leds[ASIC3_NUM_LEDS] = {
+ [0] = {
+ .name = "hx4700:amber",
+ .default_trigger = "ds2760-battery.0-charging-blink-full-solid",
+ },
+ [1] = {
+ .name = "hx4700:green",
+ .default_trigger = "unused",
+ },
+ [2] = {
+ .name = "hx4700:blue",
+ .default_trigger = "hx4700-radio",
+ },
+};
+
static struct resource asic3_resources[] = {
/* GPIO part */
[0] = {
@@ -275,6 +290,7 @@ static struct asic3_platform_data asic3_platform_data = {
.gpio_config_num = ARRAY_SIZE(asic3_gpio_config),
.irq_base = IRQ_BOARD_START,
.gpio_base = HX4700_ASIC3_GPIO_BASE,
+ .leds = asic3_leds,
};
static struct platform_device asic3 = {
@@ -705,10 +721,9 @@ static void hx4700_set_vpp(struct platform_device *pdev, int vpp)
gpio_set_value(GPIO91_HX4700_FLASH_VPEN, vpp);
}
-static struct resource strataflash_resource = {
- .start = PXA_CS0_PHYS,
- .end = PXA_CS0_PHYS + SZ_128M - 1,
- .flags = IORESOURCE_MEM,
+static struct resource strataflash_resource[] = {
+ [0] = DEFINE_RES_MEM(PXA_CS0_PHYS, SZ_64M),
+ [1] = DEFINE_RES_MEM(PXA_CS0_PHYS + SZ_64M, SZ_64M),
};
static struct physmap_flash_data strataflash_data = {
@@ -719,8 +734,8 @@ static struct physmap_flash_data strataflash_data = {
static struct platform_device strataflash = {
.name = "physmap-flash",
.id = -1,
- .resource = &strataflash_resource,
- .num_resources = 1,
+ .resource = strataflash_resource,
+ .num_resources = ARRAY_SIZE(strataflash_resource),
.dev = {
.platform_data = &strataflash_data,
},
@@ -788,17 +803,6 @@ static struct platform_device audio = {
/*
- * PCMCIA
- */
-
-static struct platform_device pcmcia = {
- .name = "hx4700-pcmcia",
- .dev = {
- .parent = &asic3.dev,
- },
-};
-
-/*
* Platform devices
*/
@@ -814,7 +818,6 @@ static struct platform_device *devices[] __initdata = {
&power_supply,
&strataflash,
&audio,
- &pcmcia,
};
static struct gpio global_gpios[] = {
@@ -830,7 +833,6 @@ static struct gpio global_gpios[] = {
{ GPIO32_HX4700_RS232_ON, GPIOF_OUT_INIT_HIGH, "RS232_ON" },
{ GPIO71_HX4700_ASIC3_nRESET, GPIOF_OUT_INIT_HIGH, "ASIC3_nRESET" },
{ GPIO82_HX4700_EUART_RESET, GPIOF_OUT_INIT_HIGH, "EUART_RESET" },
- { GPIO105_HX4700_nIR_ON, GPIOF_OUT_INIT_HIGH, "nIR_EN" },
};
static void __init hx4700_init(void)
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
index ec0f0b0b6744..a65867209aa0 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
@@ -158,7 +158,9 @@
#define GPIO44_BTUART_CTS MFP_CFG_IN(GPIO44, AF1)
#define GPIO42_BTUART_RXD MFP_CFG_IN(GPIO42, AF1)
#define GPIO45_BTUART_RTS MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH)
+#define GPIO45_BTUART_RTS_LPM_LOW MFP_CFG_OUT(GPIO45, AF2, DRIVE_LOW)
#define GPIO43_BTUART_TXD MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH)
+#define GPIO43_BTUART_TXD_LPM_LOW MFP_CFG_OUT(GPIO43, AF2, DRIVE_LOW)
/* STUART */
#define GPIO46_STUART_RXD MFP_CFG_IN(GPIO46, AF2)
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 326ea3a98725..82c0915729ee 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -304,5 +304,6 @@ config MACH_WLF_CRAGG_6410
select S3C64XX_DEV_SPI0
select SAMSUNG_GPIO_EXTRA128
select I2C
+ select LEDS_GPIO_REGISTER
help
Machine support for the Wolfson Cragganmore S3C6410 variant.
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 32a30f38ba0c..b6a67728cc88 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -11,6 +11,7 @@
#include <linux/export.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
+#include <linux/spi/spi.h>
#include <linux/mfd/wm831x/irq.h>
#include <linux/mfd/wm831x/gpio.h>
@@ -21,8 +22,25 @@
#include <sound/wm8962.h>
#include <sound/wm9081.h>
+#include <plat/s3c64xx-spi.h>
+
#include <mach/crag6410.h>
+static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
+ .set_level = gpio_set_value,
+ .line = S3C64XX_GPC(3),
+};
+
+static struct spi_board_info wm1253_devs[] = {
+ [0] = {
+ .modalias = "wm0010",
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_0,
+ .controller_data = &wm0010_spi_csinfo,
+ },
+};
+
static struct wm5100_pdata wm5100_pdata = {
.ldo_ena = S3C64XX_GPN(7),
.irq_flags = IRQF_TRIGGER_HIGH,
@@ -159,14 +177,21 @@ static __devinitdata const struct {
const char *name;
const struct i2c_board_info *i2c_devs;
int num_i2c_devs;
+ const struct spi_board_info *spi_devs;
+ int num_spi_devs;
} gf_mods[] = {
{ .id = 0x01, .name = "1250-EV1 Springbank" },
{ .id = 0x02, .name = "1251-EV1 Jura" },
{ .id = 0x03, .name = "1252-EV1 Glenlivet" },
{ .id = 0x11, .name = "6249-EV2 Glenfarclas", },
+ { .id = 0x14, .name = "6271-EV1 Lochnagar" },
+ { .id = 0x15, .name = "XXXX-EV1 Bells" },
{ .id = 0x21, .name = "1275-EV1 Mortlach" },
{ .id = 0x25, .name = "1274-EV1 Glencadam" },
- { .id = 0x31, .name = "1253-EV1 Tomatin", },
+ { .id = 0x31, .name = "1253-EV1 Tomatin",
+ .spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) },
+ { .id = 0x32, .name = "XXXX-EV1 Caol Illa" },
+ { .id = 0x33, .name = "XXXX-EV1 Oban" },
{ .id = 0x39, .name = "1254-EV1 Dallas Dhu",
.i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
{ .id = 0x3a, .name = "1259-EV1 Tobermory",
@@ -198,12 +223,16 @@ static __devinit int wlf_gf_module_probe(struct i2c_client *i2c,
if (i < ARRAY_SIZE(gf_mods)) {
dev_info(&i2c->dev, "%s revision %d\n",
gf_mods[i].name, rev + 1);
+
for (j = 0; j < gf_mods[i].num_i2c_devs; j++) {
if (!i2c_new_device(i2c->adapter,
&(gf_mods[i].i2c_devs[j])))
dev_err(&i2c->dev,
"Failed to register dev: %d\n", ret);
}
+
+ spi_register_board_info(gf_mods[i].spi_devs,
+ gf_mods[i].num_spi_devs);
} else {
dev_warn(&i2c->dev, "Unknown module ID 0x%x revision %d\n",
id, rev + 1);
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 3b56bd9cb880..e20bf5835365 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -19,7 +19,9 @@
#include <linux/io.h>
#include <linux/init.h>
#include <linux/gpio.h>
+#include <linux/leds.h>
#include <linux/delay.h>
+#include <linux/mmc/host.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/pwm_backlight.h>
@@ -299,6 +301,7 @@ static struct platform_device littlemill_device = {
};
static struct regulator_consumer_supply wallvdd_consumers[] = {
+ REGULATOR_SUPPLY("SPKVDD", "1-001a"),
REGULATOR_SUPPLY("SPKVDD1", "1-001a"),
REGULATOR_SUPPLY("SPKVDD2", "1-001a"),
REGULATOR_SUPPLY("SPKVDDL", "1-001a"),
@@ -575,11 +578,19 @@ static struct s3c2410_platform_i2c i2c0_pdata = {
.frequency = 400000,
};
+static struct regulator_consumer_supply pvdd_1v2_consumers[] __initdata = {
+ REGULATOR_SUPPLY("DCVDD", "spi0.0"),
+ REGULATOR_SUPPLY("AVDD", "spi0.0"),
+};
+
static struct regulator_init_data pvdd_1v2 __initdata = {
.constraints = {
.name = "PVDD_1V2",
- .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
+
+ .consumer_supplies = pvdd_1v2_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(pvdd_1v2_consumers),
};
static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = {
@@ -593,6 +604,7 @@ static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = {
REGULATOR_SUPPLY("AVDD2", "1-001a"),
REGULATOR_SUPPLY("DCVDD", "1-001a"),
REGULATOR_SUPPLY("AVDD", "1-001a"),
+ REGULATOR_SUPPLY("DBVDD", "spi0.0"),
};
static struct regulator_init_data pvdd_1v8 __initdata = {
@@ -682,6 +694,7 @@ static void __init crag6410_map_io(void)
static struct s3c_sdhci_platdata crag6410_hsmmc2_pdata = {
.max_width = 4,
.cd_type = S3C_SDHCI_CD_PERMANENT,
+ .host_caps = MMC_CAP_POWER_OFF_CARD,
};
static void crag6410_cfg_sdhci0(struct platform_device *dev, int width)
@@ -697,6 +710,55 @@ static struct s3c_sdhci_platdata crag6410_hsmmc0_pdata = {
.max_width = 4,
.cd_type = S3C_SDHCI_CD_INTERNAL,
.cfg_gpio = crag6410_cfg_sdhci0,
+ .host_caps = MMC_CAP_POWER_OFF_CARD,
+};
+
+static const struct gpio_led gpio_leds[] = {
+ {
+ .name = "d13:green:",
+ .gpio = MMGPIO_GPIO_BASE + 0,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ },
+ {
+ .name = "d14:green:",
+ .gpio = MMGPIO_GPIO_BASE + 1,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ },
+ {
+ .name = "d15:green:",
+ .gpio = MMGPIO_GPIO_BASE + 2,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ },
+ {
+ .name = "d16:green:",
+ .gpio = MMGPIO_GPIO_BASE + 3,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ },
+ {
+ .name = "d17:green:",
+ .gpio = MMGPIO_GPIO_BASE + 4,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ },
+ {
+ .name = "d18:green:",
+ .gpio = MMGPIO_GPIO_BASE + 5,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ },
+ {
+ .name = "d19:green:",
+ .gpio = MMGPIO_GPIO_BASE + 6,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ },
+ {
+ .name = "d20:green:",
+ .gpio = MMGPIO_GPIO_BASE + 7,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ },
+};
+
+static const struct gpio_led_platform_data gpio_leds_pdata = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
};
static struct s3c_hsotg_plat crag6410_hsotg_pdata;
@@ -731,9 +793,12 @@ static void __init crag6410_machine_init(void)
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
samsung_keypad_set_platdata(&crag6410_keypad_data);
+ s3c64xx_spi0_set_platdata(&s3c64xx_spi0_pdata, 0, 1);
platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices));
+ gpio_led_register_device(-1, &gpio_leds_pdata);
+
regulator_has_full_constraints();
s3c64xx_pm_init();
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 82525e3831e9..29594fc4fdf4 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -124,6 +124,10 @@ config MACH_SMDKC110
select S3C_DEV_I2C2
select S3C_DEV_RTC
select S3C_DEV_WDT
+ select S5P_DEV_FIMC0
+ select S5P_DEV_FIMC1
+ select S5P_DEV_FIMC2
+ select S5P_DEV_MFC
select SAMSUNG_DEV_IDE
select S5PV210_SETUP_I2C1
select S5PV210_SETUP_I2C2
@@ -148,6 +152,11 @@ config MACH_SMDKV210
select S3C_DEV_I2C2
select S3C_DEV_RTC
select S3C_DEV_WDT
+ select S5P_DEV_FIMC0
+ select S5P_DEV_FIMC1
+ select S5P_DEV_FIMC2
+ select S5P_DEV_JPEG
+ select S5P_DEV_MFC
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_IDE
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index b9ec0c35379f..09609d50961d 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -340,6 +340,11 @@ static struct clk init_clocks_off[] = {
.enable = s5pv210_clk_ip0_ctrl,
.ctrlbit = (1 << 26),
}, {
+ .name = "jpeg",
+ .parent = &clk_hclk_dsys.clk,
+ .enable = s5pv210_clk_ip0_ctrl,
+ .ctrlbit = (1 << 28),
+ }, {
.name = "mfc",
.devname = "s5p-mfc",
.parent = &clk_pclk_psys.clk,
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
index 89c34b8f73bf..b7c8a1917ffc 100644
--- a/arch/arm/mach-s5pv210/include/mach/map.h
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -90,6 +90,8 @@
#define S5PV210_PA_FIMC1 0xFB300000
#define S5PV210_PA_FIMC2 0xFB400000
+#define S5PV210_PA_JPEG 0xFB600000
+
#define S5PV210_PA_SDO 0xF9000000
#define S5PV210_PA_VP 0xF9100000
#define S5PV210_PA_MIXER 0xF9200000
@@ -132,6 +134,8 @@
#define S5P_PA_SYSCON S5PV210_PA_SYSCON
#define S5P_PA_TIMER S5PV210_PA_TIMER
+#define S5P_PA_JPEG S5PV210_PA_JPEG
+
#define SAMSUNG_PA_ADC S5PV210_PA_ADC
#define SAMSUNG_PA_CFCON S5PV210_PA_CFCON
#define SAMSUNG_PA_KEYPAD S5PV210_PA_KEYPAD
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 5e734d025a6a..a9ea64e0da0d 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -616,6 +616,7 @@ static struct platform_device *aquila_devices[] __initdata = {
&s5p_device_fimc0,
&s5p_device_fimc1,
&s5p_device_fimc2,
+ &s5p_device_fimc_md,
&s5pv210_device_iis0,
&wm8994_fixed_voltage0,
&wm8994_fixed_voltage1,
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index b323983b2c54..dfc29236321c 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -31,6 +31,7 @@
#include <plat/iic.h>
#include <plat/pm.h>
#include <plat/s5p-time.h>
+#include <plat/mfc.h>
#include "common.h"
@@ -94,6 +95,13 @@ static struct platform_device *smdkc110_devices[] __initdata = {
&s3c_device_i2c2,
&s3c_device_rtc,
&s3c_device_wdt,
+ &s5p_device_fimc0,
+ &s5p_device_fimc1,
+ &s5p_device_fimc2,
+ &s5p_device_fimc_md,
+ &s5p_device_mfc,
+ &s5p_device_mfc_l,
+ &s5p_device_mfc_r,
};
static struct i2c_board_info smdkc110_i2c_devs0[] __initdata = {
@@ -117,6 +125,11 @@ static void __init smdkc110_map_io(void)
s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
}
+static void __init smdkc110_reserve(void)
+{
+ s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
+}
+
static void __init smdkc110_machine_init(void)
{
s3c_pm_init();
@@ -145,4 +158,5 @@ MACHINE_START(SMDKC110, "SMDKC110")
.init_machine = smdkc110_machine_init,
.timer = &s5p_timer,
.restart = s5pv210_restart,
+ .reserve = &smdkc110_reserve,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 0933c8e1eb7b..91d4ad8bcc73 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -46,6 +46,7 @@
#include <plat/s5p-time.h>
#include <plat/backlight.h>
#include <plat/regs-fb-v4.h>
+#include <plat/mfc.h>
#include "common.h"
@@ -223,6 +224,14 @@ static struct platform_device *smdkv210_devices[] __initdata = {
&s3c_device_rtc,
&s3c_device_ts,
&s3c_device_wdt,
+ &s5p_device_fimc0,
+ &s5p_device_fimc1,
+ &s5p_device_fimc2,
+ &s5p_device_fimc_md,
+ &s5p_device_jpeg,
+ &s5p_device_mfc,
+ &s5p_device_mfc_l,
+ &s5p_device_mfc_r,
&s5pv210_device_ac97,
&s5pv210_device_iis0,
&s5pv210_device_spdif,
@@ -282,6 +291,11 @@ static void __init smdkv210_map_io(void)
s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
}
+static void __init smdkv210_reserve(void)
+{
+ s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
+}
+
static void __init smdkv210_machine_init(void)
{
s3c_pm_init();
@@ -319,4 +333,5 @@ MACHINE_START(SMDKV210, "SMDKV210")
.init_machine = smdkv210_machine_init,
.timer = &s5p_timer,
.restart = s5pv210_restart,
+ .reserve = &smdkv210_reserve,
MACHINE_END
diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c
index 7a95e0bc4aba..e20b419d5983 100644
--- a/arch/arm/mach-tegra/board-dt-tegra20.c
+++ b/arch/arm/mach-tegra/board-dt-tegra20.c
@@ -131,11 +131,7 @@ static void __init tegra_dt_init(void)
}
static const char *tegra20_dt_board_compat[] = {
- "compulab,trimslice",
- "nvidia,harmony",
- "compal,paz00",
- "nvidia,seaboard",
- "nvidia,ventana",
+ "nvidia,tegra20",
NULL
};
diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c
index b4124b12a779..96f6c0d030bd 100644
--- a/arch/arm/mach-tegra/board-dt-tegra30.c
+++ b/arch/arm/mach-tegra/board-dt-tegra30.c
@@ -69,7 +69,7 @@ static void __init tegra30_dt_init(void)
}
static const char *tegra30_dt_board_compat[] = {
- "nvidia,cardhu",
+ "nvidia,tegra30",
NULL
};
diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c
index 21d1285731b3..c0298b3f7d63 100644
--- a/arch/arm/mach-tegra/board-harmony-power.c
+++ b/arch/arm/mach-tegra/board-harmony-power.c
@@ -36,13 +36,14 @@ static struct regulator_consumer_supply tps658621_ldo0_supply[] = {
static struct regulator_init_data ldo0_data = {
.constraints = {
- .min_uV = 1250 * 1000,
+ .min_uV = 3300 * 1000,
.max_uV = 3300 * 1000,
.valid_modes_mask = (REGULATOR_MODE_NORMAL |
REGULATOR_MODE_STANDBY),
.valid_ops_mask = (REGULATOR_CHANGE_MODE |
REGULATOR_CHANGE_STATUS |
REGULATOR_CHANGE_VOLTAGE),
+ .apply_uV = 1,
},
.num_consumer_supplies = ARRAY_SIZE(tps658621_ldo0_supply),
.consumer_supplies = tps658621_ldo0_supply,
diff --git a/arch/arm/plat-omap/include/plat/board-ams-delta.h b/arch/arm/plat-omap/include/plat/board-ams-delta.h
index 51b102dc906b..ad6f865d1f16 100644
--- a/arch/arm/plat-omap/include/plat/board-ams-delta.h
+++ b/arch/arm/plat-omap/include/plat/board-ams-delta.h
@@ -28,33 +28,8 @@
#if defined (CONFIG_MACH_AMS_DELTA)
-#define AMS_DELTA_LATCH1_PHYS 0x01000000
-#define AMS_DELTA_LATCH1_VIRT 0xEA000000
-#define AMS_DELTA_MODEM_PHYS 0x04000000
-#define AMS_DELTA_MODEM_VIRT 0xEB000000
-#define AMS_DELTA_LATCH2_PHYS 0x08000000
-#define AMS_DELTA_LATCH2_VIRT 0xEC000000
-
-#define AMS_DELTA_LATCH1_LED_CAMERA 0x01
-#define AMS_DELTA_LATCH1_LED_ADVERT 0x02
-#define AMS_DELTA_LATCH1_LED_EMAIL 0x04
-#define AMS_DELTA_LATCH1_LED_HANDSFREE 0x08
-#define AMS_DELTA_LATCH1_LED_VOICEMAIL 0x10
-#define AMS_DELTA_LATCH1_LED_VOICE 0x20
-
-#define AMS_DELTA_LATCH2_LCD_VBLEN 0x0001
-#define AMS_DELTA_LATCH2_LCD_NDISP 0x0002
-#define AMS_DELTA_LATCH2_NAND_NCE 0x0004
-#define AMS_DELTA_LATCH2_NAND_NRE 0x0008
-#define AMS_DELTA_LATCH2_NAND_NWP 0x0010
-#define AMS_DELTA_LATCH2_NAND_NWE 0x0020
-#define AMS_DELTA_LATCH2_NAND_ALE 0x0040
-#define AMS_DELTA_LATCH2_NAND_CLE 0x0080
-#define AMD_DELTA_LATCH2_KEYBRD_PWR 0x0100
-#define AMD_DELTA_LATCH2_KEYBRD_DATA 0x0200
#define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400
#define AMD_DELTA_LATCH2_SCARD_CMDVCC 0x0800
-#define AMS_DELTA_LATCH2_MODEM_NRESET 0x1000
#define AMS_DELTA_LATCH2_MODEM_CODEC 0x2000
#define AMS_DELTA_GPIO_PIN_KEYBRD_DATA 0
@@ -66,9 +41,29 @@
#define AMS_DELTA_GPIO_PIN_CONFIG 11
#define AMS_DELTA_GPIO_PIN_NAND_RB 12
+#define AMS_DELTA_GPIO_PIN_LCD_VBLEN 240
+#define AMS_DELTA_GPIO_PIN_LCD_NDISP 241
+#define AMS_DELTA_GPIO_PIN_NAND_NCE 242
+#define AMS_DELTA_GPIO_PIN_NAND_NRE 243
+#define AMS_DELTA_GPIO_PIN_NAND_NWP 244
+#define AMS_DELTA_GPIO_PIN_NAND_NWE 245
+#define AMS_DELTA_GPIO_PIN_NAND_ALE 246
+#define AMS_DELTA_GPIO_PIN_NAND_CLE 247
+#define AMS_DELTA_GPIO_PIN_KEYBRD_PWR 248
+#define AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT 249
+#define AMS_DELTA_GPIO_PIN_SCARD_RSTIN 250
+#define AMS_DELTA_GPIO_PIN_SCARD_CMDVCC 251
+#define AMS_DELTA_GPIO_PIN_MODEM_NRESET 252
+#define AMS_DELTA_GPIO_PIN_MODEM_CODEC 253
+
+#define AMS_DELTA_LATCH2_GPIO_BASE AMS_DELTA_GPIO_PIN_LCD_VBLEN
+#define AMS_DELTA_LATCH2_NGPIO 16
+
#ifndef __ASSEMBLY__
-void ams_delta_latch1_write(u8 mask, u8 value);
-void ams_delta_latch2_write(u16 mask, u16 value);
+void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value);
+#define ams_delta_latch2_write(mask, value) \
+ ams_delta_latch_write(AMS_DELTA_LATCH2_GPIO_BASE, \
+ AMS_DELTA_LATCH2_NGPIO, (mask), (value))
#endif
#endif /* CONFIG_MACH_AMS_DELTA */
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index 6ee90495ca4c..cc3f11ba7a99 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -160,6 +160,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
DEBUG_LL_OMAP3(3, igep0020);
DEBUG_LL_OMAP3(3, igep0030);
DEBUG_LL_OMAP3(3, nokia_rm680);
+ DEBUG_LL_OMAP3(3, nokia_rm696);
DEBUG_LL_OMAP3(3, nokia_rx51);
DEBUG_LL_OMAP3(3, omap3517evm);
DEBUG_LL_OMAP3(3, omap3_beagle);