diff options
Diffstat (limited to 'drivers/acpi/executer/exsystem.c')
-rw-r--r-- | drivers/acpi/executer/exsystem.c | 378 |
1 files changed, 378 insertions, 0 deletions
diff --git a/drivers/acpi/executer/exsystem.c b/drivers/acpi/executer/exsystem.c new file mode 100644 index 000000000000..f92efc512890 --- /dev/null +++ b/drivers/acpi/executer/exsystem.c @@ -0,0 +1,378 @@ + +/****************************************************************************** + * + * Module Name: exsystem - Interface to OS services + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2005, R. Byron Moore + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + + +#include <acpi/acpi.h> +#include <acpi/acinterp.h> +#include <acpi/acevents.h> + +#define _COMPONENT ACPI_EXECUTER + ACPI_MODULE_NAME ("exsystem") + + +/******************************************************************************* + * + * FUNCTION: acpi_ex_system_wait_semaphore + * + * PARAMETERS: Semaphore - OSD semaphore to wait on + * Timeout - Max time to wait + * + * RETURN: Status + * + * DESCRIPTION: Implements a semaphore wait with a check to see if the + * semaphore is available immediately. If it is not, the + * interpreter is released. + * + ******************************************************************************/ + +acpi_status +acpi_ex_system_wait_semaphore ( + acpi_handle semaphore, + u16 timeout) +{ + acpi_status status; + acpi_status status2; + + + ACPI_FUNCTION_TRACE ("ex_system_wait_semaphore"); + + + status = acpi_os_wait_semaphore (semaphore, 1, 0); + if (ACPI_SUCCESS (status)) { + return_ACPI_STATUS (status); + } + + if (status == AE_TIME) { + /* We must wait, so unlock the interpreter */ + + acpi_ex_exit_interpreter (); + + status = acpi_os_wait_semaphore (semaphore, 1, timeout); + + ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "*** Thread awake after blocking, %s\n", + acpi_format_exception (status))); + + /* Reacquire the interpreter */ + + status2 = acpi_ex_enter_interpreter (); + if (ACPI_FAILURE (status2)) { + /* Report fatal error, could not acquire interpreter */ + + return_ACPI_STATUS (status2); + } + } + + return_ACPI_STATUS (status); +} + + +/******************************************************************************* + * + * FUNCTION: acpi_ex_system_do_stall + * + * PARAMETERS: how_long - The amount of time to stall, + * in microseconds + * + * RETURN: Status + * + * DESCRIPTION: Suspend running thread for specified amount of time. + * Note: ACPI specification requires that Stall() does not + * relinquish the processor, and delays longer than 100 usec + * should use Sleep() instead. We allow stalls up to 255 usec + * for compatibility with other interpreters and existing BIOSs. + * + ******************************************************************************/ + +acpi_status +acpi_ex_system_do_stall ( + u32 how_long) +{ + acpi_status status = AE_OK; + + + ACPI_FUNCTION_ENTRY (); + + + if (how_long > 255) /* 255 microseconds */ { + /* + * Longer than 255 usec, this is an error + * + * (ACPI specifies 100 usec as max, but this gives some slack in + * order to support existing BIOSs) + */ + ACPI_REPORT_ERROR (("Stall: Time parameter is too large (%d)\n", how_long)); + status = AE_AML_OPERAND_VALUE; + } + else { + acpi_os_stall (how_long); + } + + return (status); +} + + +/******************************************************************************* + * + * FUNCTION: acpi_ex_system_do_suspend + * + * PARAMETERS: how_long - The amount of time to suspend, + * in milliseconds + * + * RETURN: None + * + * DESCRIPTION: Suspend running thread for specified amount of time. + * + ******************************************************************************/ + +acpi_status +acpi_ex_system_do_suspend ( + acpi_integer how_long) +{ + acpi_status status; + + + ACPI_FUNCTION_ENTRY (); + + + /* Since this thread will sleep, we must release the interpreter */ + + acpi_ex_exit_interpreter (); + + acpi_os_sleep (how_long); + + /* And now we must get the interpreter again */ + + status = acpi_ex_enter_interpreter (); + return (status); +} + + +/******************************************************************************* + * + * FUNCTION: acpi_ex_system_acquire_mutex + * + * PARAMETERS: *time_desc - The 'time to delay' object descriptor + * *obj_desc - The object descriptor for this op + * + * RETURN: Status + * + * DESCRIPTION: Provides an access point to perform synchronization operations + * within the AML. This function will cause a lock to be generated + * for the Mutex pointed to by obj_desc. + * + ******************************************************************************/ + +acpi_status +acpi_ex_system_acquire_mutex ( + union acpi_operand_object *time_desc, + union acpi_operand_object *obj_desc) +{ + acpi_status status = AE_OK; + + + ACPI_FUNCTION_TRACE_PTR ("ex_system_acquire_mutex", obj_desc); + + + if (!obj_desc) { + return_ACPI_STATUS (AE_BAD_PARAMETER); + } + + /* + * Support for the _GL_ Mutex object -- go get the global lock + */ + if (obj_desc->mutex.semaphore == acpi_gbl_global_lock_semaphore) { + status = acpi_ev_acquire_global_lock ((u16) time_desc->integer.value); + return_ACPI_STATUS (status); + } + + status = acpi_ex_system_wait_semaphore (obj_desc->mutex.semaphore, + (u16) time_desc->integer.value); + return_ACPI_STATUS (status); +} + + +/******************************************************************************* + * + * FUNCTION: acpi_ex_system_release_mutex + * + * PARAMETERS: *obj_desc - The object descriptor for this op + * + * RETURN: Status + * + * DESCRIPTION: Provides an access point to perform synchronization operations + * within the AML. This operation is a request to release a + * previously acquired Mutex. If the Mutex variable is set then + * it will be decremented. + * + ******************************************************************************/ + +acpi_status +acpi_ex_system_release_mutex ( + union acpi_operand_object *obj_desc) +{ + acpi_status status = AE_OK; + + + ACPI_FUNCTION_TRACE ("ex_system_release_mutex"); + + + if (!obj_desc) { + return_ACPI_STATUS (AE_BAD_PARAMETER); + } + + /* + * Support for the _GL_ Mutex object -- release the global lock + */ + if (obj_desc->mutex.semaphore == acpi_gbl_global_lock_semaphore) { + status = acpi_ev_release_global_lock (); + return_ACPI_STATUS (status); + } + + status = acpi_os_signal_semaphore (obj_desc->mutex.semaphore, 1); + return_ACPI_STATUS (status); +} + + +/******************************************************************************* + * + * FUNCTION: acpi_ex_system_signal_event + * + * PARAMETERS: *obj_desc - The object descriptor for this op + * + * RETURN: AE_OK + * + * DESCRIPTION: Provides an access point to perform synchronization operations + * within the AML. + * + ******************************************************************************/ + +acpi_status +acpi_ex_system_signal_event ( + union acpi_operand_object *obj_desc) +{ + acpi_status status = AE_OK; + + + ACPI_FUNCTION_TRACE ("ex_system_signal_event"); + + + if (obj_desc) { + status = acpi_os_signal_semaphore (obj_desc->event.semaphore, 1); + } + + return_ACPI_STATUS (status); +} + + +/******************************************************************************* + * + * FUNCTION: acpi_ex_system_wait_event + * + * PARAMETERS: *time_desc - The 'time to delay' object descriptor + * *obj_desc - The object descriptor for this op + * + * RETURN: Status + * + * DESCRIPTION: Provides an access point to perform synchronization operations + * within the AML. This operation is a request to wait for an + * event. + * + ******************************************************************************/ + +acpi_status +acpi_ex_system_wait_event ( + union acpi_operand_object *time_desc, + union acpi_operand_object *obj_desc) +{ + acpi_status status = AE_OK; + + + ACPI_FUNCTION_TRACE ("ex_system_wait_event"); + + + if (obj_desc) { + status = acpi_ex_system_wait_semaphore (obj_desc->event.semaphore, + (u16) time_desc->integer.value); + } + + return_ACPI_STATUS (status); +} + + +/******************************************************************************* + * + * FUNCTION: acpi_ex_system_reset_event + * + * PARAMETERS: *obj_desc - The object descriptor for this op + * + * RETURN: Status + * + * DESCRIPTION: Reset an event to a known state. + * + ******************************************************************************/ + +acpi_status +acpi_ex_system_reset_event ( + union acpi_operand_object *obj_desc) +{ + acpi_status status = AE_OK; + void *temp_semaphore; + + + ACPI_FUNCTION_ENTRY (); + + + /* + * We are going to simply delete the existing semaphore and + * create a new one! + */ + status = acpi_os_create_semaphore (ACPI_NO_UNIT_LIMIT, 0, &temp_semaphore); + if (ACPI_SUCCESS (status)) { + (void) acpi_os_delete_semaphore (obj_desc->event.semaphore); + obj_desc->event.semaphore = temp_semaphore; + } + + return (status); +} + |