diff options
Diffstat (limited to 'drivers/ata/ahci.c')
-rw-r--r-- | drivers/ata/ahci.c | 84 |
1 files changed, 79 insertions, 5 deletions
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 15a23031833f..fe3eba5d6b3e 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -219,6 +219,8 @@ enum { AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */ AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */ AHCI_HFLAG_NO_SUSPEND = (1 << 10), /* don't suspend */ + AHCI_HFLAG_SRST_TOUT_IS_OFFLINE = (1 << 11), /* treat SRST timeout as + link offline */ /* ap->flags bits */ @@ -513,11 +515,16 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */ { PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */ { PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */ + { PCI_VDEVICE(INTEL, 0x3a22), board_ahci }, /* ICH10 */ { PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */ + { PCI_VDEVICE(INTEL, 0x3b22), board_ahci }, /* PCH AHCI */ + { PCI_VDEVICE(INTEL, 0x3b23), board_ahci }, /* PCH AHCI */ { PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */ { PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */ + { PCI_VDEVICE(INTEL, 0x3b29), board_ahci }, /* PCH AHCI */ { PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */ { PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */ + { PCI_VDEVICE(INTEL, 0x3b2f), board_ahci }, /* PCH AHCI */ /* JMicron 360/1/3/5/6, match class to avoid IDE function */ { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, @@ -1658,6 +1665,7 @@ static int ahci_do_softreset(struct ata_link *link, unsigned int *class, int (*check_ready)(struct ata_link *link)) { struct ata_port *ap = link->ap; + struct ahci_host_priv *hpriv = ap->host->private_data; const char *reason = NULL; unsigned long now, msecs; struct ata_taskfile tf; @@ -1696,12 +1704,21 @@ static int ahci_do_softreset(struct ata_link *link, unsigned int *class, /* wait for link to become ready */ rc = ata_wait_after_reset(link, deadline, check_ready); - /* link occupied, -ENODEV too is an error */ - if (rc) { + if (rc == -EBUSY && hpriv->flags & AHCI_HFLAG_SRST_TOUT_IS_OFFLINE) { + /* + * Workaround for cases where link online status can't + * be trusted. Treat device readiness timeout as link + * offline. + */ + ata_link_printk(link, KERN_INFO, + "device not ready, treating as offline\n"); + *class = ATA_DEV_NONE; + } else if (rc) { + /* link occupied, -ENODEV too is an error */ reason = "device not ready"; goto fail; - } - *class = ahci_dev_classify(ap); + } else + *class = ahci_dev_classify(ap); DPRINTK("EXIT, class=%u\n", *class); return 0; @@ -1768,7 +1785,8 @@ static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class, irq_sts = readl(port_mmio + PORT_IRQ_STAT); if (irq_sts & PORT_IRQ_BAD_PMP) { ata_link_printk(link, KERN_WARNING, - "failed due to HW bug, retry pmp=0\n"); + "applying SB600 PMP SRST workaround " + "and retrying\n"); rc = ahci_do_softreset(link, class, 0, deadline, ahci_check_ready); } @@ -2721,6 +2739,56 @@ static bool ahci_broken_suspend(struct pci_dev *pdev) return !ver || strcmp(ver, dmi->driver_data) < 0; } +static bool ahci_broken_online(struct pci_dev *pdev) +{ +#define ENCODE_BUSDEVFN(bus, slot, func) \ + (void *)(unsigned long)(((bus) << 8) | PCI_DEVFN((slot), (func))) + static const struct dmi_system_id sysids[] = { + /* + * There are several gigabyte boards which use + * SIMG5723s configured as hardware RAID. Certain + * 5723 firmware revisions shipped there keep the link + * online but fail to answer properly to SRST or + * IDENTIFY when no device is attached downstream + * causing libata to retry quite a few times leading + * to excessive detection delay. + * + * As these firmwares respond to the second reset try + * with invalid device signature, considering unknown + * sig as offline works around the problem acceptably. + */ + { + .ident = "EP45-DQ6", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, + "Gigabyte Technology Co., Ltd."), + DMI_MATCH(DMI_BOARD_NAME, "EP45-DQ6"), + }, + .driver_data = ENCODE_BUSDEVFN(0x0a, 0x00, 0), + }, + { + .ident = "EP45-DS5", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, + "Gigabyte Technology Co., Ltd."), + DMI_MATCH(DMI_BOARD_NAME, "EP45-DS5"), + }, + .driver_data = ENCODE_BUSDEVFN(0x03, 0x00, 0), + }, + { } /* terminate list */ + }; +#undef ENCODE_BUSDEVFN + const struct dmi_system_id *dmi = dmi_first_match(sysids); + unsigned int val; + + if (!dmi) + return false; + + val = (unsigned long)dmi->driver_data; + + return pdev->bus->number == (val >> 8) && pdev->devfn == (val & 0xff); +} + static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; @@ -2836,6 +2904,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) "BIOS update required for suspend/resume\n"); } + if (ahci_broken_online(pdev)) { + hpriv->flags |= AHCI_HFLAG_SRST_TOUT_IS_OFFLINE; + dev_info(&pdev->dev, + "online status unreliable, applying workaround\n"); + } + /* CAP.NP sometimes indicate the index of the last enabled * port, at other times, that of the last possible port, so * determining the maximum port number requires looking at |