summaryrefslogtreecommitdiff
path: root/drivers/ata/pata_hpt37x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_hpt37x.c')
-rw-r--r--drivers/ata/pata_hpt37x.c245
1 files changed, 52 insertions, 193 deletions
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 9a10878b2ad8..42163998de9a 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -283,7 +283,7 @@ static unsigned long hpt370_filter(struct ata_device *adev, unsigned long mask)
if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5))
mask &= ~(0xE0 << ATA_SHIFT_UDMA);
}
- return ata_pci_default_filter(adev, mask);
+ return ata_bmdma_mode_filter(adev, mask);
}
/**
@@ -299,7 +299,7 @@ static unsigned long hpt370a_filter(struct ata_device *adev, unsigned long mask)
if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5))
mask &= ~(0xE0 << ATA_SHIFT_UDMA);
}
- return ata_pci_default_filter(adev, mask);
+ return ata_bmdma_mode_filter(adev, mask);
}
/**
@@ -338,22 +338,10 @@ static int hpt37x_pre_reset(struct ata_link *link, unsigned long deadline)
pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
udelay(100);
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
-/**
- * hpt37x_error_handler - reset the hpt374
- * @ap: ATA port to reset
- *
- * Perform probe for HPT37x, except for HPT374 channel 2
- */
-
-static void hpt37x_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, hpt37x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
-static int hpt374_pre_reset(struct ata_link *link, unsigned long deadline)
+static int hpt374_fn1_pre_reset(struct ata_link *link, unsigned long deadline)
{
static const struct pci_bits hpt37x_enable_bits[] = {
{ 0x50, 1, 0x04, 0x04 },
@@ -386,26 +374,7 @@ static int hpt374_pre_reset(struct ata_link *link, unsigned long deadline)
pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
udelay(100);
- return ata_std_prereset(link, deadline);
-}
-
-/**
- * hpt374_error_handler - reset the hpt374
- * @classes:
- *
- * The 374 cable detect is a little different due to the extra
- * channels. The function 0 channels work like usual but function 1
- * is special
- */
-
-static void hpt374_error_handler(struct ata_port *ap)
-{
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-
- if (!(PCI_FUNC(pdev->devfn) & 1))
- hpt37x_error_handler(ap);
- else
- ata_bmdma_drive_eh(ap, hpt374_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+ return ata_sff_prereset(link, deadline);
}
/**
@@ -619,21 +588,7 @@ static void hpt37x_bmdma_stop(struct ata_queued_cmd *qc)
static struct scsi_host_template hpt37x_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
/*
@@ -641,36 +596,15 @@ static struct scsi_host_template hpt37x_sht = {
*/
static struct ata_port_operations hpt370_port_ops = {
- .set_piomode = hpt370_set_piomode,
- .set_dmamode = hpt370_set_dmamode,
- .mode_filter = hpt370_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
+ .inherits = &ata_bmdma_port_ops,
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = hpt37x_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
-
- .bmdma_setup = ata_bmdma_setup,
.bmdma_start = hpt370_bmdma_start,
.bmdma_stop = hpt370_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
- .port_start = ata_sff_port_start,
+ .mode_filter = hpt370_filter,
+ .set_piomode = hpt370_set_piomode,
+ .set_dmamode = hpt370_set_dmamode,
+ .prereset = hpt37x_pre_reset,
};
/*
@@ -678,36 +612,8 @@ static struct ata_port_operations hpt370_port_ops = {
*/
static struct ata_port_operations hpt370a_port_ops = {
- .set_piomode = hpt370_set_piomode,
- .set_dmamode = hpt370_set_dmamode,
+ .inherits = &hpt370_port_ops,
.mode_filter = hpt370a_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = hpt37x_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = hpt370_bmdma_start,
- .bmdma_stop = hpt370_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
};
/*
@@ -716,74 +622,23 @@ static struct ata_port_operations hpt370a_port_ops = {
*/
static struct ata_port_operations hpt372_port_ops = {
- .set_piomode = hpt372_set_piomode,
- .set_dmamode = hpt372_set_dmamode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
+ .inherits = &ata_bmdma_port_ops,
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = hpt37x_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
.bmdma_stop = hpt37x_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
- .port_start = ata_sff_port_start,
+ .set_piomode = hpt372_set_piomode,
+ .set_dmamode = hpt372_set_dmamode,
+ .prereset = hpt37x_pre_reset,
};
/*
* Configuration for HPT374. Mode setting works like 372 and friends
- * but we have a different cable detection procedure.
+ * but we have a different cable detection procedure for function 1.
*/
-static struct ata_port_operations hpt374_port_ops = {
- .set_piomode = hpt372_set_piomode,
- .set_dmamode = hpt372_set_dmamode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = hpt374_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = hpt37x_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+static struct ata_port_operations hpt374_fn1_port_ops = {
+ .inherits = &hpt372_port_ops,
+ .prereset = hpt374_fn1_pre_reset,
};
/**
@@ -897,7 +752,6 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
/* HPT370 - UDMA100 */
static const struct ata_port_info info_hpt370 = {
- .sht = &hpt37x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -906,7 +760,6 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
};
/* HPT370A - UDMA100 */
static const struct ata_port_info info_hpt370a = {
- .sht = &hpt37x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -915,7 +768,6 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
};
/* HPT370 - UDMA100 */
static const struct ata_port_info info_hpt370_33 = {
- .sht = &hpt37x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -924,7 +776,6 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
};
/* HPT370A - UDMA100 */
static const struct ata_port_info info_hpt370a_33 = {
- .sht = &hpt37x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -933,28 +784,31 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
};
/* HPT371, 372 and friends - UDMA133 */
static const struct ata_port_info info_hpt372 = {
- .sht = &hpt37x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.udma_mask = ATA_UDMA6,
.port_ops = &hpt372_port_ops
};
- /* HPT374 - UDMA100 */
- static const struct ata_port_info info_hpt374 = {
- .sht = &hpt37x_sht,
+ /* HPT374 - UDMA100, function 1 uses different prereset method */
+ static const struct ata_port_info info_hpt374_fn0 = {
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.udma_mask = ATA_UDMA5,
- .port_ops = &hpt374_port_ops
+ .port_ops = &hpt372_port_ops
+ };
+ static const struct ata_port_info info_hpt374_fn1 = {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .udma_mask = ATA_UDMA5,
+ .port_ops = &hpt374_fn1_port_ops
};
static const int MHz[4] = { 33, 40, 50, 66 };
- const struct ata_port_info *port;
void *private_data = NULL;
- struct ata_port_info port_info;
- const struct ata_port_info *ppi[] = { &port_info, NULL };
+ const struct ata_port_info *ppi[] = { NULL, NULL };
u8 irqmask;
u32 class_rev;
@@ -966,6 +820,11 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
const struct hpt_chip *chip_table;
int clock_slot;
+ int rc;
+
+ rc = pcim_enable_device(dev);
+ if (rc)
+ return rc;
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
class_rev &= 0xFF;
@@ -981,17 +840,17 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
switch(class_rev) {
case 3:
- port = &info_hpt370;
+ ppi[0] = &info_hpt370;
chip_table = &hpt370;
prefer_dpll = 0;
break;
case 4:
- port = &info_hpt370a;
+ ppi[0] = &info_hpt370a;
chip_table = &hpt370a;
prefer_dpll = 0;
break;
case 5:
- port = &info_hpt372;
+ ppi[0] = &info_hpt372;
chip_table = &hpt372;
break;
default:
@@ -1004,21 +863,21 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
/* 372N if rev >= 2*/
if (class_rev >= 2)
return -ENODEV;
- port = &info_hpt372;
+ ppi[0] = &info_hpt372;
chip_table = &hpt372a;
break;
case PCI_DEVICE_ID_TTI_HPT302:
/* 302N if rev > 1 */
if (class_rev > 1)
return -ENODEV;
- port = &info_hpt372;
+ ppi[0] = &info_hpt372;
/* Check this */
chip_table = &hpt302;
break;
case PCI_DEVICE_ID_TTI_HPT371:
if (class_rev > 1)
return -ENODEV;
- port = &info_hpt372;
+ ppi[0] = &info_hpt372;
chip_table = &hpt371;
/* Single channel device, master is not present
but the BIOS (or us for non x86) must mark it
@@ -1029,7 +888,10 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
break;
case PCI_DEVICE_ID_TTI_HPT374:
chip_table = &hpt374;
- port = &info_hpt374;
+ if (!(PCI_FUNC(dev->devfn) & 1))
+ *ppi = &info_hpt374_fn0;
+ else
+ *ppi = &info_hpt374_fn1;
break;
default:
printk(KERN_ERR "pata_hpt37x: PCI table is bogus please report (%d).\n", dev->device);
@@ -1108,7 +970,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
int dpll, adjust;
/* Compute DPLL */
- dpll = (port->udma_mask & 0xC0) ? 3 : 2;
+ dpll = (ppi[0]->udma_mask & 0xC0) ? 3 : 2;
f_low = (MHz[clock_slot] * 48) / MHz[dpll];
f_high = f_low + 2;
@@ -1148,19 +1010,16 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
* about lack of UDMA133 support on lower clocks
*/
- if (clock_slot < 2 && port == &info_hpt370)
- port = &info_hpt370_33;
- if (clock_slot < 2 && port == &info_hpt370a)
- port = &info_hpt370a_33;
+ if (clock_slot < 2 && ppi[0] == &info_hpt370)
+ ppi[0] = &info_hpt370_33;
+ if (clock_slot < 2 && ppi[0] == &info_hpt370a)
+ ppi[0] = &info_hpt370a_33;
printk(KERN_INFO "pata_hpt37x: %s using %dMHz bus clock.\n",
chip_table->name, MHz[clock_slot]);
}
/* Now kick off ATA set up */
- port_info = *port;
- port_info.private_data = private_data;
-
- return ata_pci_init_one(dev, ppi);
+ return ata_pci_sff_init_one(dev, ppi, &hpt37x_sht, private_data);
}
static const struct pci_device_id hpt37x[] = {