diff options
Diffstat (limited to 'drivers/ata/pata_hpt37x.c')
| -rw-r--r-- | drivers/ata/pata_hpt37x.c | 54 |
1 files changed, 44 insertions, 10 deletions
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 9ae4c0830577..9c62951c3e26 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -8,7 +8,7 @@ * Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org> * Portions Copyright (C) 2001 Sun Microsystems, Inc. * Portions Copyright (C) 2003 Red Hat Inc - * Portions Copyright (C) 2005-2009 MontaVista Software, Inc. + * Portions Copyright (C) 2005-2010 MontaVista Software, Inc. * * TODO * Look into engine reset on timeout errors. Should not be required. @@ -24,7 +24,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_hpt37x" -#define DRV_VERSION "0.6.15" +#define DRV_VERSION "0.6.16" struct hpt_clock { u8 xfer_speed; @@ -302,6 +302,22 @@ static unsigned long hpt370a_filter(struct ata_device *adev, unsigned long mask) } /** + * hpt372_filter - mode selection filter + * @adev: ATA device + * @mask: mode mask + * + * The Marvell bridge chips used on the HighPoint SATA cards do not seem + * to support the UltraDMA modes 1, 2, and 3 as well as any MWDMA modes... + */ +static unsigned long hpt372_filter(struct ata_device *adev, unsigned long mask) +{ + if (ata_id_is_sata(adev->id)) + mask &= ~((0xE << ATA_SHIFT_UDMA) | ATA_MASK_MWDMA); + + return mask; +} + +/** * hpt37x_cable_detect - Detect the cable type * @ap: ATA port to detect on * @@ -586,11 +602,11 @@ static struct ata_port_operations hpt370a_port_ops = { }; /* - * Configuration for HPT372, HPT371, HPT302. Slightly different PIO - * and DMA mode setting functionality. + * Configuration for HPT371 and HPT302. Slightly different PIO and DMA + * mode setting functionality. */ -static struct ata_port_operations hpt372_port_ops = { +static struct ata_port_operations hpt302_port_ops = { .inherits = &ata_bmdma_port_ops, .bmdma_stop = hpt37x_bmdma_stop, @@ -602,7 +618,17 @@ static struct ata_port_operations hpt372_port_ops = { }; /* - * Configuration for HPT374. Mode setting works like 372 and friends + * Configuration for HPT372. Mode setting works like 371 and 302 + * but we have a mode filter. + */ + +static struct ata_port_operations hpt372_port_ops = { + .inherits = &hpt302_port_ops, + .mode_filter = hpt372_filter, +}; + +/* + * Configuration for HPT374. Mode setting and filtering works like 372 * but we have a different cable detection procedure for function 1. */ @@ -753,7 +779,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) .udma_mask = ATA_UDMA5, .port_ops = &hpt370a_port_ops }; - /* HPT371, 372 and friends - UDMA133 */ + /* HPT372 - UDMA133 */ static const struct ata_port_info info_hpt372 = { .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = ATA_PIO4, @@ -761,6 +787,14 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) .udma_mask = ATA_UDMA6, .port_ops = &hpt372_port_ops }; + /* HPT371, 302 - UDMA133 */ + static const struct ata_port_info info_hpt302 = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &hpt302_port_ops + }; /* HPT374 - UDMA100, function 1 uses different prereset method */ static const struct ata_port_info info_hpt374_fn0 = { .flags = ATA_FLAG_SLAVE_POSS, @@ -828,7 +862,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) } else { switch(dev->device) { case PCI_DEVICE_ID_TTI_HPT372: - /* 372N if rev >= 2*/ + /* 372N if rev >= 2 */ if (rev >= 2) return -ENODEV; ppi[0] = &info_hpt372; @@ -838,14 +872,14 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) /* 302N if rev > 1 */ if (rev > 1) return -ENODEV; - ppi[0] = &info_hpt372; + ppi[0] = &info_hpt302; /* Check this */ chip_table = &hpt302; break; case PCI_DEVICE_ID_TTI_HPT371: if (rev > 1) return -ENODEV; - ppi[0] = &info_hpt372; + ppi[0] = &info_hpt302; chip_table = &hpt371; /* Single channel device, master is not present but the BIOS (or us for non x86) must mark it |